|
| | Preview | Author(s) | Title | Type | Issue Date |
| 121 | | Bleicher, Fritz ; Steininger, Andreas ; Finkeldei, Daniel | Determination of coefficients of friction using an inverse pin-on-disc-test setup implemented on a machining center | Konferenzbeitrag Inproceedings | 2018 |
| 122 | | Krall, Stephan | MHP - actuator concepts and applications | Konferenzbeitrag Inproceedings | 2018 |
| 123 | | Finkeldei, Daniel ; Brier, Jens ; Bleicher, Fritz | Investigation of tool geometry and cutting speed in machining of difficult to cut materials | Konferenzbeitrag Inproceedings | 2018 |
| 124 | | Klingenbrunner, Martin ; Platzer, Julia ; Bleicher, Fritz | Determining thr emissivity factor of thermoplastic materials for a thermoplastic bending process | Konferenzbeitrag Inproceedings | 2018 |
| 125 | | Bleicher, Fritz ; Reiter, Manuel | Wear reduction on cutting inserts by additional internal cooling of the cutting edge | Konferenzbeitrag Inproceedings | 2018 |
| 126 | | Bleicher, Fritz ; Wiesinger, Gerhard ; Kumpf, Christoph ; Finkeldei, Daniel ; Baumann, Christian ; Lechner, Christoph | Schwingungsunterstützte Bearbeitung von CFK/Stahl-Hybridwerkstoffen | Präsentation Presentation | 2018 |
| 127 | | Wiesinger, Gerhard ; Finkeldei, Daniel ; Baumann, Christian ; Petzenhammer, Felix ; Bleicher, Fritz | Previous benchmarks at the TU Wien | Präsentation Presentation | 2018 |
| 128 | | Finkeldei, Daniel ; Wiesinger, Gerhard ; Bleicher, Fritz | Results of the 3rdFiberCutBenchmark | Präsentation Presentation | 2018 |
| 129 | | Baumann, Christian | Vibration-assisted drilling of multilayer CFRP / Ti/ Al stacks | Präsentation Presentation | 2018 |
| 130 | | Lechner, Christoph | Fibre reinforced polymers as engineering materials | Präsentation Presentation | 2018 |
| 131 | | Finkeldei, Daniel ; Bleicher, Fritz | Analysis of chip formationin machining nickel based and gamma titanium alloys | Präsentation Presentation | 2018 |
| 132 | | Reiter, Manuel | Endbericht Projekt Tiefbohren von Kontaktrohren | Bericht Report | 2018 |
| 133 | | Reiter, Manuel | Endbericht Projekt Pleuel bohren | Bericht Report | 2018 |
| 134 | | Krall, Stephan ; Lechner, Christoph | Fortschrittsbericht im ProjektMachbarkeitsstudie MHP-Schienenbearbeitung Jänner 2018 | Bericht Report | 2018 |
| 135 | | Krall, Stephan ; Lechner, Christoph | Forschungsaktivitäten des IFT im Projekt SEPIM_2 | Bericht Report | 2018 |
| 136 | | Krall, Stephan ; Nirtl, Michael | Forschungsaktivitäten des IFT im Projekt SEPIM | Bericht Report | 2018 |
| 137 | | Reiter, Manuel ; Brier, Jens ; Bleicher, Fritz | Machining of Iron-Carbon Alloys by the Use of Poly-Crystalline Diamond Cutting Inserts with Internal Cooling | Buchbeitrag Book Contribution | 2018 |
| 138 | | Lamprecht, Matthias ; Finkeldei, Daniel | Zerspanungstechnische Charakterisierung von NemAlloy HT-200 (AlCu7) | Bericht Report | 2017 |
| 139 | | Bleicher, Fritz ; Steininger, Andreas | Investigation of the Dynamic Behavior in Drilling with Indexable Insert Drills and Influence of the Contact Energy on Surface Modification by MHP | Konferenzbeitrag Inproceedings | 2017 |
| 140 | | Reiter, Manuel ; Krall, Stephan ; Bleicher, Fritz | Mechanical functionalisation of cutting inserts by machine hammer peening | Konferenzbeitrag Inproceedings | 2017 |
