Name Card

Full name Familienname, Vorname
Requena, Guillermo Carlos
 
Main Affiliation Organisations­zuordnung
 

Own Publications Eigene Publikationen

Results 1-20 of 155 (Search time: 0.003 seconds).

PreviewAuthor(s)TitleTypeIssue Date
1Bugelnig, Katrin ; Sket, Federico ; Germann, Holger ; Steffens, Thomas ; Koos, Robert ; Wilde, Fabian ; Boller, Elodie ; Requena, Guillermo Influence of 3D connectivity of rigid phases on damage evolution during tensile deformation of an AlSi12Cu4Ni2 piston alloyArtikel Article 2018
2Barriobero Vila, Pere ; Biancardi Oliveira, Verona ; Schwarz, Sabine ; Buslaps, Thomas ; Requena, Guillermo Carlos Tracking the αʺ martensite decomposition during continuous heating of a Ti-6Al-6V-2Sn alloyArtikel Article 15-Aug-2017
3Wiehoff, Pierre ; Radlwimmer, Harald ; Ilie, Sergiu ; Requena, Guillermo ; Kozeschnik, Ernst The Influence of Cyclic Cooling on the Hot-Ductility of Continuously Cast Micro-Alloyed SteelPräsentation Presentation2017
4Wiehoff, Pierre ; Radlwimmer, Harald ; Ilie, Sergiu ; Requena, Guillermo ; Kozeschnik, Ernst The Influence of Temperature Oscillations on Hot-Ductility of Continuously Cast Micro-Alloyed SteelPräsentation Presentation2017
5Bugelnig, Katrin ; Germann, Holger ; Steffens, Thomas ; Wilde, Fabian ; Boller, Elodie ; Requena, Guillermo Damage mechanisms and evolution during thermomechanical fatigue of cast near eutectic Al-Si piston alloysPräsentation Presentation2017
6Bugelnig, Katrin ; Sket, Federico ; Germann, Holger ; Steffens, Thomas ; Wilde, Fabian ; Boller, Elodie ; Requena, Guillermo 3D microstructure and damage accumulation in a cast AlSi12Cu5Ni2 piston alloy as a function of solution treatmentArtikel Article2016
7Barriobero Vila, Pere ; Requena, Guillermo ; Warchomicka, Fernando ; Stark, Andreas ; Schell, Norbert ; Buslaps, Thomas Phase transformation kinetics during continuous heating of a β-quenched Ti-10V-2Fe-3Al alloyArtikel Article 2015
8Barriobero Vila, Pere ; Requena, Guillermo ; Buslaps, Thomas ; Alfeld, Matthias ; Boesenberg, Ulrike Role of element partitioning on the α-β phase transformation kinetics of a bi-modal Ti-6Al-6V-2Sn alloy during continuous heatingArtikel Article 2015
9Barriobero Vila, Pere ; Requena, Guillermo ; Schwarz, Sabine ; Warchomicka, Fernando ; Buslaps, Thomas Influence of phase transformation kinetics on the formation of α in a β-quenched Ti-5Al-5Mo-5V-3Cr-1Zr alloyArtikel Article 2015
10Asghar, Zahid ; Requena, Guillermo ; Zahid, G. H. ; Rafi-Ud-Din, R. Effect of thermally stable Cu- and Mg-rich aluminides on the high temperature strength of an AlSi12CuMgNi alloyArtikel Article Feb-2014
11Großeiber, Simon ; Gusenbauer, Christian ; Ilie, Sergiu ; Requena, Guillermo C. ; Kozeschnik, Ernst Relevance of Hot Ductility Tests to Crack Sensitivity during Continuous Casting of SteelKonferenzbeitrag Inproceedings2014
12Großeiber, Simon ; Gusenbauer, Christian ; Ilie, Sergiu ; Kozeschnik, Ernst ; Requena, Guillermo Damage initiation during hot deformation of a continuously cast steelKonferenzbeitrag Inproceedings2014
13Asghar, Z. ; Requena, G. Three dimensional post-mortem study of damage after compression of cast Al-Si alloysArtikel Article2014
14Requena, Guillermo ; Maire, Eric ; Leguen, Claire ; Thuillier, Sandrine Separation of nucleation and growth of voids during tensile deformation of a dual phase steel using synchrotron microtomographyArtikel Article2014
15Tireira, Aly ; Requena, Guillermo ; Klocker, Helmut ; Borbély, Andras 3d Study Of Crack Propagation During Tensile Test In Alsi12 Cast Alloy Reinforced With Complex Shape Of IntermetallicsKonferenzbeitrag Inproceedings2013
16Rodríguez-Hortalá, Marta ; Requena, Guillermo ; Sket, Federico ; Molina-Aldareguia, Jon ; Maire, Eric ; Salvo, L ; Scheel, Mario 3D Damage characterisation during sequential tensile loading of a multidirectional carbon fibre reinforced epoxy laminate (CFRP)Präsentation Presentation2013
17Troufflard, Julien ; Requena, Guillermo ; Thuillier, Sandrine ; Maire, Éric Ductile damage in tension and bending for DP980 steel sheetsArtikel Article2013
18Crespo Casanova, José ; Requena, Guillermo ; Degischer, Hans-Peter ; Track, Kurt ; Tolnai, Domonkos Three-dimensional characterisation of micropores and graphite nodules in ductile cast ironArtikel Article2013
19Tolnai, D. ; Requena, G. ; Cloetens, P. ; Lendvai, J. ; Degischer, H.P. Effect of solution heat treatment on the internal architecture and compressive strength of an AlMg4.7Si8 alloyArtikel Article2013
20Schöbel, M. ; Großeiber, S. ; Jonke, J. ; Wimpory, R. ; Ilie, S. ; Requena, G. Residual Stresses in Continuously Cast Steel SlabsArtikel Article2013

Contributing Publications Mitbeteiligte Publikationen

Results 1-20 of 20 (Search time: 0.008 seconds).

PreviewAuthor(s)TitleTypeIssue Date
1Zaunschirm Stefan - 2020 - Einfluss von Rheocasting und seltene Erden auf die 3D...pdf.jpgZaunschirm, Stefan Einfluss von Rheocasting und seltene Erden auf die 3D Mikrostruktur von ZK60 GussblöckenThesis Hochschulschrift 2020
2Bugelnig Katrin - 2019 - Effect of local and global connectivity of phases on...pdf.jpgBugelnig, Katrin Effect of local and global connectivity of phases on damage evolution in cast Al-Si AlloysThesis Hochschulschrift 2019
3Großeiber, Simon Microstructure and damage evolution during warm and hot deformation of continuously cast steelThesis Hochschulschrift2017
4Pfaffinger, Markus ; Mitteramskogler, Gerald ; Gmeiner, Robert ; Stampfl, Jürgen Thermal Debinding of Ceramic-Filled PhotopolymersKonferenzbeitrag Inproceedings 2015
5Archodoulaki, Vasiliki Maria ; Merola, Massimiliano ; Kastanis, Dimitrios ; Koch, Thomas ; Carlone, Pierpaolo Influence of the Impregnation Velocity on Impregnation Quality and Mechanical Properties of Vacuum Assisted Resin Transfer Moulding (VARTM) MaterialsKonferenzbeitrag Inproceedings 2015
6Fernández Gutiérrez, Ricardo The effect of solution treatment on cast AlCuMn alloys for cylinder head productionThesis Hochschulschrift2015
7Vila, Pere Barriobero Phase transformation kinetics during continuous heating of α+β and β metastable titanium alloysThesis Hochschulschrift2015
8Sikora Andreas - 2015 - Kriechverhalten von Hochtemperatur-Aluminium HITEMAL.pdf.jpgSikora, Andreas Kriechverhalten von Hochtemperatur-Aluminium (HITEMAL)Thesis Hochschulschrift 2015
9Koos Robert - 2015 - Correlation between 3D microstructure and thermo-mechanical...pdf.jpgKoos, Robert Correlation between 3D microstructure and thermo-mechanical behavior of near eutectic piston alloysThesis Hochschulschrift 2015
10Zemann, Richard Practical Results to the Long Term Behavior of Fibre Reinforced Polymers under Constant LoadKonferenzbeitrag Inproceedings2015
11Zemann, Richard ; Sacherl, Josef ; Hake, Wolfgang ; Bleicher, Fritz Tool Life Experimente and Vibration Assistance in Regard to the Machining of CFRPKonferenzbeitrag Inproceedings2015
12Canelo Yubero, David Load partition and microstructural evolution at high temperature in multiphase lightweight metallic materialsThesis Hochschulschrift2014
13Bugelnig Katrin - 2014 - Analyse und Modellierung der Multi-...pdf.jpgBugelnig, Katrin Analyse und Modellierung der Multi- Ausscheidungskinetik der neuen Nickelbasis-Superlegierung Haynes 282Thesis Hochschulschrift 2014
14Duschel, Fabian Thermomechanische Analyse der Nickelbasis-Superlegierung Haynes 282Thesis Hochschulschrift2013
15Etzlstorfer, Christoph Bestimmung der Lastverteilung in Al-Si Legierungen mittels in-situ Synchrotron DiffraktometrieThesis Hochschulschrift2013
16Asghar, Zahid Influence of the 3D architecture of rigid phases on the strength of cast Al-Si alloysThesis Hochschulschrift2012
17Bekir, Ayhan Muhsin Microstructural evolution during ageing treatment of metastable titanium alloy Ti-17Thesis Hochschulschrift2012
18Zehetner, Egon Thermomechanische Behandlung der Alpha+Beta Titanlegierung Ti-6Al-4VThesis Hochschulschrift2012
19Tolnai, Domonkos 3D characterization of microstructure evolution of cast AlMgSi alloys by synchrotron tomographyThesis Hochschulschrift2011
20Piermayr Dominik - 2011 - Langzeitkriechpruefanlage.pdf.jpgPiermayr, Dominik LangzeitkriechprüfanlageThesis Hochschulschrift 2011