Merta, I., Zalar Serjun, V., Mauko Pranjić, A., Šajna, A., Štefančič, M., Poletanovic, B., Ameri, F., & Mladenovič, A. (2025). Investigating the synergistic impact of freeze-thaw cycles and deicing salts on the properties of cementitious composites incorporating natural fibers and fly ash. Cleaner Engineering and Technology, 24, Article 100853. https://doi.org/10.1016/j.clet.2024.100853 ( reposiTUm)

Miarka, P., Šimonová, H., Kucharczykova, B., Seitl, S., Poletanovic, B., & Merta, I. (2025). Optimisation of fine RCA content in mortar mixture based on the long-term fracture and fatigue tests. Construction and Building Materials, 481, Article 141371. https://doi.org/10.1016/j.conbuildmat.2025.141371 ( reposiTUm)

Ul Haq, Z., Sood, H., Kumar, R., & Merta, I. (2024). Taguchi-Optimized Triple-Aluminosilicate Geopolymer Bricks with Recycled Sand: A Sustainable Construction Solution. Case Studies in Construction Materials, 20, Article e02780. https://doi.org/10.1016/j.cscm.2023.e02780 ( reposiTUm)

Mauko Pranjić, A., Primož Zorec, ShivaKumar Mani, Merta, I., Dragica Marinič, Ducman, V., Tomaž Hozjan, & Mateja Dovjak. (2024). MEDNARODNA KONFERENCA O INOVATIVNI UPORABI KONOPLJE V GRADBENIŠTVU. Gradbeni Vestnik, 244–247. ( reposiTUm)

Šupić, S., Poletanovic, B., Radonjanin, V., Malesev, M., Merta, I., & Pantić, V. (2024). INFLUENCE OF ACCELERATED AGEING ON PULL-OFF STRENGTH OF CONCRETE PRODUCED WITH RECYCLED CONCRETE AGGREGATE AND BLENDED WITH HEMP FIBERS. Journal of Applied Engineering Science : JAES = Istraživanja i Projektovanja Za Privredu, 22(2), 285–290. https://doi.org/10.5937/jaes0-50466 ( reposiTUm)

Kopecsko, K., Hajdu, M., Khalaf, A. A., & Merta, I. (2024). Fresh and hardened properties for a wide range of geopolymer binders – an optimization process. Cleaner Engineering and Technology, Article 100770. https://doi.org/10.1016/j.clet.2024.100770 ( reposiTUm)

Poletanovic, B., Kopecsko, K., & Merta, I. (2024). Fibre hornification improves the long-term properties of hemp fibre-reinforced fly ash-based geopolymer mortar. Construction and Building Materials, 446, Article 137957. https://doi.org/10.1016/j.conbuildmat.2024.137957 ( reposiTUm)

Duan, W., Zhuge, Y., Chow, C. W. K., Keegan, A., Liu, Y., & Merta, I. (2023). Mitigation of alkali-silica reaction in blast-furnace slag-based alkaline activated material through incorporation of alum water treatment residue. Construction and Building Materials, 406, Article 133383. https://doi.org/10.1016/j.conbuildmat.2023.133383 ( reposiTUm)

Dacić, A., Kopecskó, K., Fenyvesi, O., & Merta, I. (2023). The Obstacles to a Broader Application of Alkali-Activated Binders as a Sustainable Alternative—A Review. Materials, 16(8), Article 3121. https://doi.org/10.3390/ma16083121 ( reposiTUm)

Khalaf, A. A., Kopecskó, K., & Merta, I. (2022). Prediction of the Compressive Strength of Fly Ash Geopolymer Concrete by an Optimised Neural Network Model. Polymers, 14(7), 1423. https://doi.org/10.3390/polym14071423 ( reposiTUm)

Fidanchevski, E., Ster, K., Mrak, M., Kljajević, L., Zibret, G., Teran, K., Poletanovic, B., Fidanchevska, M., Dolenec, S., & Merta, I. (2022). The Valorisation of Selected Quarry and Mine Waste for Sustainable Cement Production within the Concept of Circular Economy. Sustainability, 14(11), 6833. https://doi.org/10.3390/su14116833 ( reposiTUm)

Merta, I., Poletanovic, B., Dragas, J., Carevic, V., Ignjatovic, I., & Komljenovic, M. (2022). The influence of accelerated carbonation on physical and mechanical properties of hemp fibre reinforced alkali-activated fly ash and fly ash/slag mortars. Polymers, 14(9), 1799. https://doi.org/10.3390/polym14091799 ( reposiTUm)

Poletanovic, B., Janotka, I., Janek, M., Bacuvcik, M., & Merta, I. (2021). Influence of the NaOH-treated hemp fibres on the properties of fly-ash based alkali-activated mortars prior and after wet/dry cycles. Construction and Building Materials, 309(125072), 125072. https://doi.org/10.1016/j.conbuildmat.2021.125072 ( reposiTUm)

Poletanovic, B., Dragas, J., Ignjatovic, I., Komljenovic, M., & Merta, I. (2020). Physical and mechanical properties of hemp fibre reinforced alkali-activated fly ash and fly ash/slag mortars. Construction and Building Materials, 259(119677), 119677. https://doi.org/10.1016/j.conbuildmat.2020.119677 ( reposiTUm)

Merta, I., Sajna, A., Mauko Pranjic, A., Zalar, V., & Mladenovic, A. (2020). Mortars with natural microfibres - potentials and challanges (original titel in Slovenian: Malte z naravnimi mikrovlakni - potenciali in izzivi). Gradbenik, 7–8(7–8), 50–51. http://hdl.handle.net/20.500.12708/140468 ( reposiTUm)

Miarka, P., Furgieri, G., Ruzicka, V., Seitl, S., & Merta, I. (2019). A Comparison Of Crack Paths Growth In Brazilian Disc With A Central Notch Using Various Criteria For Crack Initiation. Transactions of the VSB - Technical University of Ostrava, Civil Engineering Series, 19(2), 33–38. http://hdl.handle.net/20.500.12708/144130 ( reposiTUm)

Miarka, P., Merta, I., & Seitl, S. (2019). Numerical Analysis Of Brazilian Disc Test With A Central Notch: Constrain Level For Various Notch Inclination Angles. Transactions of the VSB - Technical University of Ostrava, Civil Engineering Series, 19(2), 29–32. http://hdl.handle.net/20.500.12708/144129 ( reposiTUm)

Merta, I., Mladenovič, A., Turk, J., Šajna, A., & Mauko Pranjić, A. (2018). Life Cycle Assessment of Natural Fibre Reinforced Cementitious Composites. Key Engineering Materials, 761, 204–209. https://doi.org/10.4028/www.scientific.net/kem.761.204 ( reposiTUm)

Seitl, S., Miarka, P., Merta, I., & Keršner, Z. (2018). Numerical Stress Analysis of the Biaxial Tension-Compression Wedge-Splitting Test in Vicinity of the Crack Tip. Key Engineering Materials, 784, 85–90. https://doi.org/10.4028/www.scientific.net/kem.784.85 ( reposiTUm)

Seitl, S., Miarka, P., Ruzicka, V., Malikova, L., & Merta, I. (2018). Wedge Splitting Test: Displacement Field Analysis by Multi-parameter Fracture Mechanics. Transactions of the VŠB – Technical University of Ostrava, Civil Engineering Series, 18(2). https://doi.org/10.31490/tces-2018-0016 ( reposiTUm)

Tschegg, E., Merta, I., Fitsch, U., Lewis, G., & Kühn, K.-D. (2017). Influence of Powder Sterilization Method on Properties of PMMA Bone Cement Using Novel Wedge-splitting Test Compact Tension Method. Current Applied Polymer Science, 1(2). https://doi.org/10.2174/2452271601666170815123947 ( reposiTUm)

Merta, I., Poletanovic, B., & Kopecsko, K. (2017). Durability Of Natural Fibres Within Cement-Based Materials - Review. Concrete Structures. Journal of the Hungarian Group of Fib (Federation International de Beton), 18, 10–16. http://hdl.handle.net/20.500.12708/146595 ( reposiTUm)

Merta, I., Berger, L., Heidfogel, G., Kuhn, K.-D., Lewis, G., & Tschegg, E. (2017). Size and boundary effects on notch tensile strength and fracture properties of PMMA bone cement. Polymer Testing, 59, 441–448. http://hdl.handle.net/20.500.12708/146503 ( reposiTUm)

Šimonová, H., Havlíková, I., Sobek, J., Abdulrahman, A., Keršner, Z., & Merta, I. (2016). Evaluation of Wedge Splitting Fracture Tests using the Double-K Model: Analysis of the Effect of Hemp Fibre Dosage and Length in Concrete Specimens. Solid State Phenomena, 249, 142–146. https://doi.org/10.4028/www.scientific.net/ssp.249.142 ( reposiTUm)

Havlíková, I., Frantik, P., Masek, J., Sobek, J., Simonová, H., Veselý, V., Kersner, Z., Seitl, S., Merta, I., & Schneemayer, A. (2016). Evaluation of Fracture Tests of Concrete Specimens via Advanced Tool for Experimental Data Processing. Applied Mechanics and Materials, 821, 585–590. http://hdl.handle.net/20.500.12708/148291 ( reposiTUm)

Tschegg, E. K., Schneemayer, A., Merta, I., & Rieder, K. A. (2015). Energy dissipation capacity of fibre reinforced concrete under biaxial tension-compression load. Part II: Determination of the fracture process zone with the acoustic emission technique. Cement and Concrete Composites, 62, 187–194. https://doi.org/10.1016/j.cemconcomp.2015.07.003 ( reposiTUm)

Tschegg, E. K., Schneemayer, A., Merta, I., & Rieder, K. A. (2015). Energy dissipation capacity of fibre reinforced concrete under biaxial tension-compression load. Part I: Test equipment and work of fracture. Cement and Concrete Composites, 62, 195–203. https://doi.org/10.1016/j.cemconcomp.2015.07.002 ( reposiTUm)

Havlikova, I., Merta, I., Schneemayer, A., Vesely, V., Šimonová, H., Korycanska, B., & Kersner, Z. (2015). Effect of Fibre Type in Concrete on Crack Initiation. Applied Mechanics and Materials, 769, 308–311. https://doi.org/10.4028/www.scientific.net/amm.769.308 ( reposiTUm)

Seitl, S., Merta, I., & Veselý, V. (2015). Wedge Splitting Test of Foam Concrete Specimens: Calibration Curves. Key Engineering Materials, 627, 281–284. https://doi.org/10.4028/www.scientific.net/kem.627.281 ( reposiTUm)

Merta, I. (2014). Hemp Fibre Reinforced Foam Concrete: Discussion of the Wedge Splitting Test Method. International Journal of Research in Engineering and Technology, 0X, 1–5. http://hdl.handle.net/20.500.12708/156673 ( reposiTUm)

Merta, I., & Tschegg, E. K. (2013). Fracture energy of natural fibre reinforced concrete. Construction and Building Materials, 40, 991–997. https://doi.org/10.1016/j.conbuildmat.2012.11.060 ( reposiTUm)

Merta, I., & Kolbitsch, A. (2008). Die Schubtragfähigkeit kreisförmiger Stahlbetonbauteile mit Schubbewehrung. ÖIAZ - Österreichische Ingenieur- Und Architektenzeitschrift, 153(10–12), 393–396. http://hdl.handle.net/20.500.12708/171251 ( reposiTUm)

Merta, I., & Kolbitsch, A. (2006). Shear Capacity of Reinforced Concrete Circular Cross Section Members without Shear Reinforcement. ÖIAZ - Österreichische Ingenieur- Und Architektenzeitschrift, 4–6(151), 88–90. http://hdl.handle.net/20.500.12708/173686 ( reposiTUm)

Merta, I., Sparowitz, L., & Bedenik, B. (2003). Shear Strength Investigation of Reinforced Concrete Circular Cross Section Members. Gradbeni Vestnik (Slovenian Civil Engineer Journal), 4, 81–86. http://hdl.handle.net/20.500.12708/174904 ( reposiTUm)

Poletanovic, B., & Merta, I. (2025). Mechanical Properties of Treated Hemp Fiber-Reinforced Fly Ash-Based GeopolymersAfterWet/DryCycles. In S. Amziane, R. D. Toledo Filho, M. Y. R. da Gloria, & J. Page (Eds.), Bio-Based Building Materials - Proceedings of ICBBM 2025 (pp. 422–435). Springer. https://doi.org/10.1007/978-3-031-92874-1_35 ( reposiTUm)

Tutkun, B., & Merta, I. (2024). Negative Emission Pathways Through CO₂ Uptake of Powders in Concrete: A Preliminary Study on Influencing Parameters. In Proceedings of the 15th fib International PhD Symposium in Civil Engineering. 15th fib International PhD Symposium in Civil Engineering (2024), Budapest, Hungary. ( reposiTUm)

Mehanni, D., & Merta, I. (2024). Valorisation of Waste Slurries: Aqueous Carbonation of Recycled Fines in Industrial Waste Water. In Proceedings of the 15th fib International PhD Symposium in Civil Engineering. 15th fib International PhD Symposium in Civil Engineering (2024), Budapest, Hungary. ( reposiTUm)

Poletanovic, B., & Merta, I. (2024). Durability of short hemp fibre reinforced fly ash-based geopolymer. In G. L. Balazs, S. Solyom, & S. Foster (Eds.), Proceedings of the 15th fib International PhD Symposium in Civil Engineering (pp. 707–714). ( reposiTUm)

Poletanovic, B., & Merta, I. (2024). Durability of the hemp fibre reinforced geopolymers. In V. Radonjanin & R. Folić (Eds.), Conference Proceedings: Contemporary civil engineering practice 2024 (pp. 146–159). http://hdl.handle.net/20.500.12708/205217 ( reposiTUm)

Šupić, S., Poletanovic, B., Radonjanin, V., Malesev, M., Merta, I., & Pantić, V. (2024). INFLUENCE OF ACCELERATED AGEING ON PULL-OFF STRENGTH OF CONCRETE PRODUCED WITH RECYCLED CONCRETE AGGREGATE AND BLENDED WITH HEMP FIBRES. In GNP 2024 PROCEEDINGS (pp. 619–626). http://hdl.handle.net/20.500.12708/196146 ( reposiTUm)

Angjusheva, B., Merta, I., & Fidancevski, E. (2023). Sustainable Synergy: Alkali-Activated Coal Fly Ash and CDW in sustainable construction. In International Scientific and Professional Conference POLITEHNIKA: Conference Proceedings (pp. 237–241). ( reposiTUm)

Kumpová, I., Lisztwan, D., Poletanovic, B., Vyhlídal, M., Čairović, I., Daněk, P., Šimonová, H., Frantík, P., Merta, I., Rovnaníková, P., & Keršner, Z. (2023). Effect of slenderness ratio on compressive strength value of alkali-activated aluminosilicate composite with ceramic and fly ash precursor. In Structural and Physical Aspects of Construction Engineering 2022 (SPACE 2022) 5th International Scientific Conference. SPACE 2022 : 5th International Scientific Conference, High Tatras, Slovakia. AIP Publishing. https://doi.org/10.1063/5.0180791 ( reposiTUm)

Miarka, P., Seitl, S., Klusák, J., Malíková, L., Merta, I., & Bílek, V. (2023). High-cycle fatigue cracks in concrete investigated by μCT tomography. In J. Pokluda & P. Sandera (Eds.), Materials Structure & Micromechanics of Fracture 43 (pp. 124–129). Elsevier BV. https://doi.org/10.1016/j.prostr.2022.12.246 ( reposiTUm)

Poletanovic, B., Janotka, I., Janek, M., & Merta, I. (2023). Influence of sodium hydroxide-treated hemp fibres on the mechanical properties of fly ash-based fibre reinforced mortars. In V. Bilek, F. Khestl, P. Miarka, & S. Seitl (Eds.), Proceeding of the International Conference Non-Traditional Cement & Concrete VII (pp. 56–56). http://hdl.handle.net/20.500.12708/189673 ( reposiTUm)

Miarka, P., Malikova, L., Bilek, V., Anna Benešová, Merta, I., & Seitl, S. (2023). On the fatigue resistance of high performance concrete. In Structural and Physical Aspects of Construction Engineering 2022 (SPACE 2022) 5th International Scientific Conference. SPACE 2022 : 5th International Scientific Conference, High Tatras, Slovakia. AIP Publishing. https://doi.org/10.1063/5.0182959 ( reposiTUm)

Simonova, H., Kucharczykova, B., Poletanovic, B., Merta, I., & Kersner, Z. (2022). Mechanical fracture parameters of hemp fibre reinforced cement-based composites with recycled aggregate. In IOP Conference Series: Materials Science and Engineering (p. 012039). https://doi.org/10.1088/1757-899X/1252/1/012039 ( reposiTUm)

Yaneva, E., Papaefthymiou, S., Daling, L., Šoštarić, S. B., & Merta, I. (2022). Rethinking Education in the Raw Materials Sector through Tailor-Made Teaching Methodologies. In International Conference on Raw Materials and Circular Economy. RawMat2021, Athen, Greece. Materials Proceedings. https://doi.org/10.3390/materproc2021005094 ( reposiTUm)

Poletanovic, B., & Merta, I. (2021). Sustainable Alternatives to Traditional Cement-Based Building Materials. In 15th International Scientific Conference iNDiS Proceedings (pp. 44–52). http://hdl.handle.net/20.500.12708/63056 ( reposiTUm)

Poletanovic, B., Merta, I., Sajna, A., Mauko Pranjic, A., & Mladenovic, A. (2019). Comparison Of Physical And Mechanical Properties Of Cementitious Mortars Reinforced With Natural And Synthetic Fibres Prior And After Wet/dry Cycles. In Proceedings of the 3th International Conference On Bio-Based Building Materials (pp. 433–437). http://hdl.handle.net/20.500.12708/62665 ( reposiTUm)

Poletanovic, B., Janotka, I., Bačuvčik, M., & Merta, I. (2019). Durability Of Fly Ash-Based Alkali-Activated Mortars Reinforced With Short Hemp Fibres. In Proceedings of the International Conference on Sustainable Materials, Systems and Structures (SMSS2019) New Generation of Construction Materials (pp. 133–140). RILEM Publications S.A.R.L. http://hdl.handle.net/20.500.12708/62664 ( reposiTUm)

Simonová, H., Kucharczykova, B., Kersner, Z., Merta, I., Poletanovic, B., Malikova, L., & Seitl, S. (2019). Effect of softening function type in double-K Fracture Model: Alkali-activated fly ash mortar with hemp fibres. In Proceedings of the 10th International Conference on Fracture Mechanics of Concrete and Concrete Structures. FraMCoS-X : Fracture Mechanics of Concrete and Concrete Structures, Bayonne, France. https://doi.org/10.21012/fc10.232513 ( reposiTUm)

Merta, I. (2019). Novel sustainable composites - potentials and challenges. In Proceedings of the Contemporary Civil Engineering Practice 2019 (p. 8). International Conference “CONTEMPORARY CIVIL ENGINEERING PRACTICE 2019.” http://hdl.handle.net/20.500.12708/62667 ( reposiTUm)

Seitl, S., Miarka, P., Ruzicka, V., Malikova, L., & Merta, I. (2018). Displacement field analysis in wedge splitting test specimen by ODM method. In Proceedings of scientific conference Structural Reliability / Modelling in mechanics 2018 (pp. 1–7). VSB - TU Ostrava, Faculty of civil engineering. http://hdl.handle.net/20.500.12708/62486 ( reposiTUm)

Poletanovic, B., Kopecsko, K., & Merta, I. (2018). Durability of Hemp Fibre Reinforced Cementitious Mortars by Means of Fibre Protection and Cement Substitution with Metakaolin. In Cement-based Materials and Structural Concrete (pp. 957–962). http://hdl.handle.net/20.500.12708/62487 ( reposiTUm)

Simonova, H., Kucharczykova, B., Topolar, L., Kersner, Z., Merta, I., Dragas, J., Ignjatovic, I., Komljenovic, M., & Nikolic, V. (2018). Crack initiation of selected geopolymer mortars with hemp fibers. In Procedia Structural Integrity (pp. 578–583). Procedia Structural Integrity/Elsevier. https://doi.org/10.1016/j.prostr.2018.12.095 ( reposiTUm)

Veselý, V., Kersner, Z., & Merta, I. (2017). Quasi-brittle Behaviour of Composites as a Key to Generalized Understanding of Material Structure. In E. Kormaníková, K. Kotrasová, & S. Kmeť (Eds.), Structural and Physical Aspects of Construction Engineering (pp. 126–133). Elsevier. https://doi.org/10.1016/j.proeng.2017.05.317 ( reposiTUm)

Merta, I., Mladenovic, A., Turk, J., Sajna, A., & Mauko Pranjic, A. (2017). Sustainability of Natural Fibre Cementitious Composites. In V. Bilek, Z. Kersner, & H. Simonová (Eds.), Non-Traditional Cement & Concrete (pp. 26–27). Novpress. http://hdl.handle.net/20.500.12708/62197 ( reposiTUm)

Poletanovic, B., Merta, I., & Kolbitsch, A. (2017). Alkali-activated materials strengthened with natural fibres. In Symposium on Doctoral Studies in Civil Engineering 2017. 3. Symposium on Doctoral Studies in Civil Engineering 2017, Zagreb, Croatia. University of Zagreb, Faculty of Civil Engineering. https://doi.org/10.5592/co/phdsym.2017.07 ( reposiTUm)

Merta, I., Sajna, A., Poletanovic, B., & Mladenovic, A. (2017). Influence of natural fibres on mechanical properties and durability of cementitious mortars. In 1st International Conference on Construction Materials for Sustainable Future (pp. 1–8). http://hdl.handle.net/20.500.12708/62160 ( reposiTUm)

Merta, I. (2017). Mechanical Performance of Hemp Fibre Modified Mortar. In P. Breul, S. Amziane, & M. Sonebi (Eds.), International Conference on Bio-Based Building Materials and on Ecological Valorisation of Granular and Fibrous Materials (pp. 140–144). http://hdl.handle.net/20.500.12708/62198 ( reposiTUm)

Veselý, V., Merta, I., Simonová, H., Schneemayer, A., Seitl, S., & Kersner, Z. (2016). Component wedge-splitting/bending test of notched specimens with various crack-tip constraint conditions: Experiments and simulations. In V. E. Saouma, J. Bolander, & E. Landis (Eds.), 9th International Conference on Fracture Mechanics of Concrete and Concrete Structures (pp. 1–12). http://hdl.handle.net/20.500.12708/61968 ( reposiTUm)

Merta, I., Schneemayer, A., Rieder, K. A., & Tschegg, E. (2016). Correlation between the energy dissipation capacity and the extend of the fracture process zone of fibre reinforced concrete. In FRC: The Modern Landscape (pp. 367–375). RILEM Publications S.A.R.L. http://hdl.handle.net/20.500.12708/61969 ( reposiTUm)

Havlíková, I., Frantik, P., Masek, J., Sobek, J., Simonová, H., Veselý, V., Kersner, Z., Seitl, S., Merta, I., & Schneemayer, A. (2015). Evaluation of Fracture Tests of Concrete Specimens via Advanced Tool for Experimental Data Processing. In Engineering Mechanics 2015, 21st International Conference (pp. 86–87). http://hdl.handle.net/20.500.12708/61554 ( reposiTUm)

Simonová, H., Havlíková, I., Sobek, J., Abdulrahman, A., Kersner, Z., & Merta, I. (2015). Analýza vlivu mnozství a délek konopných vláken v betonu na iniciaci lomu: vyhodnocení testů klínovým stípáním. In Sborník příspěvků konference 22. Betonářské dny 2015 (pp. 1–6). http://hdl.handle.net/20.500.12708/61767 ( reposiTUm)

Merta, I. (2014). Hemp Fibre Reinforced Foam Concrete: Discussion of the Test Method for Evaluation of the Fracture Energy. In 5th International Conference Non-Traditional Cement & Concrete (pp. 159–162). http://hdl.handle.net/20.500.12708/61338 ( reposiTUm)

Seitl, S., Nieto García, B., & Merta, I. (2014). Wedge splitting test method: Quantification of influence of marble tool bar by two-parameter fracture mechanics. In Fracture and Structural Integrity related Issues (pp. 1–10). http://hdl.handle.net/20.500.12708/61380 ( reposiTUm)

Seitl, S., Merta, I., & Veselý, V. (2014). Wedge splitting test of foam concrete specimens: Calibration curves. In 13th International Conference on Fracture and Damage Mechanics (pp. 1–3). http://hdl.handle.net/20.500.12708/61381 ( reposiTUm)

Havlíková, I., Merta, I., Schneemayer, A., Koryčanská, B., Veselý, V., & Kersner, Z. (2014). Effect of Fibres Type in Concrete on Crack Initiation. In Proceedings of the 12th International Conference on New Trends in Statics and Dynamics of Buildings (pp. 98–101). http://hdl.handle.net/20.500.12708/61483 ( reposiTUm)

Merta, I., & Tschegg, E. (2013). Uniaxial Fracture Energy of Waste Tyre Rubber Concrete. In J. G. M. van Mier, C. Andrade, G. Ruiz, R. C. Yu, & X. Zhang (Eds.), Fracture Mechanics of Concrete and Concrete Structures. http://hdl.handle.net/20.500.12708/61025 ( reposiTUm)

Merta, I., Kopecsko, K., & Tschegg, E. (2012). Durability of hemp fibers in the alkaline environment of cement matrix. In J. Barros, J. Sena-Cruz, R. Ferreira, I. Valente, M. Azenha, & S. Dias (Eds.), Fibre Reinforced Concrete: challenges and opportunities (pp. 1–8). RILEM Publications S.A.R.L. http://hdl.handle.net/20.500.12708/60748 ( reposiTUm)

Merta, I., & Tschegg, E. (2012). Uniaxial Fracture Energy of Natural Fibre Concrete. In D. H. Bager & J. Silfwerbrand (Eds.), Concrete Structures for Sustainable Community (pp. 491–494). http://hdl.handle.net/20.500.12708/60749 ( reposiTUm)

Merta, I., & Kravanja, S. (2011). Competitiveness of Reinforced Concrete Floor Systems. In B. H. V. Topping & Y. Tsompanakis (Eds.), Proceedings of the Thirteenth International Conference on Civil, Structural and Environmental Engineering Computing. https://doi.org/10.4203/ccp.96.146 ( reposiTUm)

Merta, I., Tschegg, E., Tschegg, S., & Kolbitsch, A. (2011). Fracture Machanics Of Concrete Reinforced With Hemp, Straw And Elephant Grass Fibres. In Composite Materials: Key to the Future. The 18th International Conference on Composite Materials, Jeju Island, Korea, Non-EU. http://hdl.handle.net/20.500.12708/60664 ( reposiTUm)

Merta, I., & Kravanja, S. (2010). Optimum design of singly reinforced concrete rectangular beams. In IV European Congress on Computational Mechanics Solids, Structures and Coupled Problems in Engineering. ECCOMAS, Paris, France, EU. http://hdl.handle.net/20.500.12708/60170 ( reposiTUm)

Merta, I., & Kravanja, S. (2010). Cost Optimum Design of Reinforced Concrete Simply Supported One-way Slabs. In B. H. V. Topping, J. M. Adam, F. J. Pallares, R. Bru, & M. L. Romero (Eds.), Proceedings of the Tenth International Conference on Computational Structures Technology. Civil-Comp Press. https://doi.org/10.4203/ccp.93.315 ( reposiTUm)

Merta, I., & Kravanja, S. (2010). Multi-parametric NLP Optimization of singly reinforced concrete rectangular beams. In Third international fib Congress (pp. 1–10). http://hdl.handle.net/20.500.12708/60171 ( reposiTUm)

Merta, I., & Kravanja, S. (2010). Cost Optimization of Reinforced Concrete Plates. In 2nd International Conference on Engineering Optimization (p. 118). http://hdl.handle.net/20.500.12708/60173 ( reposiTUm)

Merta, I., & Kravanja, S. (2010). Cost Optimum Design of Reinforced Concrete Simply Supported One-way Slabs. In Earth & Space (pp. 2670–2678). ASCE. http://hdl.handle.net/20.500.12708/60146 ( reposiTUm)

Merta, I., Tschegg, E., & Kolbitsch, A. (2010). Fracture Mechanical Properties of Concrete Reinforced with Straw Fibres. In S. Tschegg & R. Seidel (Eds.), Principles and Development of Bio-Inspired Materials (pp. 145–146). http://hdl.handle.net/20.500.12708/60433 ( reposiTUm)

Merta, I., & Kravanja, S. (2009). Cost-Optimum Design of Reinforced Concrete T-Section Beams. In Third International Conference on Modeling, Simulation and Applied Optimization (p. 5). American University of Sharjah. http://hdl.handle.net/20.500.12708/59880 ( reposiTUm)

Merta, I., & Kravanja, S. (2009). Cost-Optimum Design of Singly Reinforced Concrete Beams with Rectangular Cross-Section. In Canadian Society for Civil Engineering Annual Conference 2009 (pp. 1071–1080). Canadian Society for Civil Engineering (CSCE). http://hdl.handle.net/20.500.12708/59926 ( reposiTUm)

Merta, I., & Kolbitsch, A. (2009). The Deviatoric Shear Capacity Mechanism by Reinforced Concrete Circular Members. In Y. Sonoda, N. Banthia, & K. Fujikake (Eds.), Structures under Extreme Loading (p. 9). http://hdl.handle.net/20.500.12708/60034 ( reposiTUm)

Merta, I., & Kravanja, S. (2009). Minimum Cost Design of Reinforced Concrete Beams using a Nonlinear Programming Approach. In Civil-Comp Proceedings. The Twelfth International Conference on Civil, Structural and Environmental Engineering Computing, Funchal, Madeira, EU. Civil-Comp Press. https://doi.org/10.4203/ccp.91.124 ( reposiTUm)

Merta, I., Kravanja, S., & Kolbitsch, A. (2009). Optimization Based Cost Comparison of RC Beams Rectangular Cross Section with Different Aspect Ratios. In D. T. Tsahalis (Ed.), 3rd International Conferences on Experiments / Process / System (p. 8). http://hdl.handle.net/20.500.12708/60037 ( reposiTUm)

Merta, I., Kravanja, S., & Klansek, U. (2008). Optimization based cost comparison between reinforced concrete and steel beams. In High Performance Structures and Materials IV (pp. 449–456). WIT Press. http://hdl.handle.net/20.500.12708/59637 ( reposiTUm)

Merta, I., & Kolbitsch, A. (2008). Seismic shear strength model of reinforced concrete circular cross-section members. In R. K. Dhir, T. A. Harrison, L. Zheng, & S. Kandasami (Eds.), Concrete durability: Achievement and enhancement (pp. 919–930). IHS BRE Press. http://hdl.handle.net/20.500.12708/59779 ( reposiTUm)

Merta, I., & Kolbitsch, A. (2007). Shear Capacity Model of Reinforced Concrete Circular Cross-Section Members. In F. Toutlemonde, K. Sakai, O. E. Gjorv, & N. Banthia (Eds.), Concrete Under Severe Conditions - Environment and Loading, Proceedings of the 5th International Conference CONSEC-07 (pp. 1201–1208). Concrete Under Severe Conditions. http://hdl.handle.net/20.500.12708/59402 ( reposiTUm)

Merta, I. (2007). Shear strength model of reinforced concrete circular cross-section members. In A. Zingoni (Ed.), Recent Developments in Structural Engineering, Mechanics and Computation (p. 6). Millpress Science Publishers, Rotterdam, The Netherlands. http://hdl.handle.net/20.500.12708/59550 ( reposiTUm)

Merta, I., & Kolbitsch, A. (2006). Analytical Evaluation of the Effective Area of Reinforced Concrete Circular Sections under Shear. In Real Structures: Bridges and Tall Buildings (pp. 735–740). http://hdl.handle.net/20.500.12708/59265 ( reposiTUm)

Merta, I. (2005). Flexural Design of Reinforced Concrete Beams with T-Section. In N. Banthia, T. Uomoto, A. Bentur, & S. Shah (Eds.), Construction Materials (p. 7). The University of British Columbia. http://hdl.handle.net/20.500.12708/58922 ( reposiTUm)

Merta, I. (2005). Design of Reinforced Concrete T-Cross Sections Subjected to Flexure. In Concrete-Issues, Opportunities, Innovations (p. 6). The Concrete Institute of Australia. http://hdl.handle.net/20.500.12708/58948 ( reposiTUm)

Poletanovic, B., Nemeth, G., & Merta, I. (2020). Influence of the Curing Temperatures on the Mechanical Properties of Hemp Fibre-Reinforced Alkali-Activated Mortars. In P. Serna, A. Llano-Torre, J. R. Martí-Vargas, & J. Navarro-Gregori (Eds.), Fibre Reinforced Concrete: Improvements and Innovations (Vol. 30, pp. 245–252). Springer Nature. https://doi.org/10.1007/978-3-030-58482-5_22 ( reposiTUm)

Merta, I. (2016). Hemp Fibres-A Promising Reinforcement for Cementitious Materials. In R. Fangueiro & Rana Sohel (Eds.), Natural Fibres: Advances in Science and Technology Towards Industrial Applications (pp. 291–303). Springer Verlag. https://doi.org/10.1007/978-94-017-7515-1_22 ( reposiTUm)

Merta, I., Yaneva, E., Weber, E., David, L., Hajdu, N., Daling, L., Papaefthymiou, S., & Borojević Sostarić, S. (2020). Teaching Methodology Syllabus. TU Wien. http://hdl.handle.net/20.500.12708/24829 ( reposiTUm)

Dolenec, S., Malovrh Rebec, K., Lesek, A., Ster, K., Zibret, L., Zibret, G., Teran, K., Pučko, E., Merta, I., Poletanovic, B., Yaneva, E., Kesserű, P., Kovács, I., Kószó, B., Németh, A., Laucournet, R., Hadzalić, M., Fidanchevski, E., Angjusheva, B., … Ipavec, A. (2020). Manual for use of Al-containing residues in low-carbon mineral binders. Slovenian National Building and Civil Engineering Institute. http://hdl.handle.net/20.500.12708/24833 ( reposiTUm)

Merta, I. (1999). Matematicki prirucnik (Handbuch der Mathematik). Suvremeno Gospodarstvo, Kroatien. http://hdl.handle.net/20.500.12708/22367 ( reposiTUm)

Merta, I. (1998). Matematicni prirocnik (Handbuch der Mathematik) - 3. Auflage. Merta & Co., Maribor, Slovenia. http://hdl.handle.net/20.500.12708/22365 ( reposiTUm)

Merta, I. (1998). Podrecznik matematyki (Handbuch der Mathematik). Intermarkpress 2000, Warszawa, Poland. http://hdl.handle.net/20.500.12708/22366 ( reposiTUm)

Merta, I. (1997). Matematikai kézikönyv (Handbuch der Mathematik) - 1. Auflage. Fimath. http://hdl.handle.net/20.500.12708/22364 ( reposiTUm)

Amziane, S., Merta, I., & Page, J. (Eds.). (2023). Bio-Based Building Materials : Proceedings of ICBBM 2023 (Vol. 45). Springer. https://doi.org/10.1007/978-3-031-33465-8 ( reposiTUm)

Hausner, L., & Merta, I. (2025, June 18). CIRCULAR MATERIALS IN CONSTRUCTION [Presentation]. REBUILT- PUBLIC SERVANTS TRAINING PROGRAMME, Austria. http://hdl.handle.net/20.500.12708/216670 ( reposiTUm)

Merta, I. (2024, November 13). Hemp as fibre reinforcement – potentials and challenges [Keynote Presentation]. 1st international conference on innovative use of hemp in the construction sector (IIHC), Ljubljana, Slovenia. ( reposiTUm)

Merta, I. (2023, September 22). Recycled Aggregate Concrete - Current Challenges [Keynote Presentation]. 26th Congress of the Society of Chemists and Technologists of Macedonia (SCTM), Ohrid, Republic of North Macedonia. http://hdl.handle.net/20.500.12708/188646 ( reposiTUm)

Angjusheva, B., Merta, I., & Fidancevski, E. (2023, September 22). Alkali Activation of Coal Fly Ash and Construction and Demolition Waste: A Sustainable Path to Innovative Materials [Poster Presentation]. 26th Congress of the Society of Chemists and Technologists of Macedonia (SCTM), Ohrid, Republic of North Macedonia. http://hdl.handle.net/20.500.12708/188645 ( reposiTUm)

Merta, I. (2022, October 20). UPCYCLING CONRETE: recent research, future trends [Keynote Presentation]. 28. Congress of the SOCIETY FOR TESTING AND RESEARCH of MATERIALS AND CONSTRUCTION OF SERBIA and 9. Congress of the ASSOCIATION of the INDUSTRY CLAY PRODUCTS OF SERBIA, Divčibare, Serbia. ( reposiTUm)

Merta, I. (2022). Bio-based concretes - potentials and challenges. Feminine research in the field of civil engineering, CERGY PARIS UNIVERSITY, Institut D’études Avancées - International House De La Recherche, France. http://hdl.handle.net/20.500.12708/115789 ( reposiTUm)

Merta, I. (2022). Potentials of natural fibre cementitious composites. Bi-National Seminar on Bio-Aggregates and Natural Building Materials, Online, Unknown. http://hdl.handle.net/20.500.12708/115808 ( reposiTUm)

Poletanovic, B., Kopecsko, K., & Merta, I. (2022, September 28). The influence of the hornification on the mechanical properties of the hemp fibre reinforced fly ash-based geopolymer mortar [Conference Presentation]. 5th International Conference “Innovative Materials, Structures and Technologies” (IMST 2022), Riga, Latvia. http://hdl.handle.net/20.500.12708/135844 ( reposiTUm)

Merta, I. (2021). Natural fibers from industrial waste as fibre reinforcement in cementitious composites. Valorization and reuse of wastes and circular economy International Conference, Université de Cergy-Pontoise, Department of Civil Engineering (Institute of Technologies), Paris, France. http://hdl.handle.net/20.500.12708/115562 ( reposiTUm)

Merta, I. (2021). Sustainable cementitious composites: Recent research and development. Guest Lecture Chulalongkorn University, Bangkok, Thailand. http://hdl.handle.net/20.500.12708/115636 ( reposiTUm)

Merta, I., & Yaneva, E. (2021). MOBI-US Workshop 2, Improvement Session 1: Entrepreneurial and innovative learning and teaching. MOBI-US Workshop 2, an EIT RawMaterials Project, Faculty of Mining, Geology and Petroleum Engineering, University of Zagreb, Zagreb, Croatia, Croatia. http://hdl.handle.net/20.500.12708/115755 ( reposiTUm)

Merta, I. (2021). Innovative sustainable building materials. iNDiS 2021, 15 TH INTERNATIONAL SCIENTIFIC CONFERENCE, Faculty of Technical Sciences University of Novi Sad, Department of Civil Engineering, Belgrade, Serbia. http://hdl.handle.net/20.500.12708/115756 ( reposiTUm)

Yaneva, E., & Merta, I. (2021). New pathways to create industrial symbiosis on the topic of red mud. RIS-RESTORE Summer School: The appearance of circular economy concept and industrial symbiosis in the utilization of red mud, Ljubljana, Slovewenien, Slovenia. http://hdl.handle.net/20.500.12708/115757 ( reposiTUm)

Merta, I. (2021). Properties of cementitious building materials containing secondary raw material. Al-rich industrial residues for inorganic materials - Online Summer School, VINCA - Institute of Nuclear Science, Belgrade, Serbia. http://hdl.handle.net/20.500.12708/115497 ( reposiTUm)

Merta, I. (2021). Advanced natural fibre reinforced composites-potentials and challenges. ICBBM, 4th International Conference on Bio-Based Building Materials, Barcelona, Spain. http://hdl.handle.net/20.500.12708/115529 ( reposiTUm)

Merta, I. (2018). Neuartige Faserbetone. Blickpunkt Forschung: Materialinnovationen @ TU Wien, Wien, Austria. http://hdl.handle.net/20.500.12708/114637 ( reposiTUm)

Merta, I., Poletanovic, B., & Kopecsko, K. (2017). Natural fibres within cementitious composites. CCC2017 Central European Congress on Concrete Engineering, Tokaj, Hungary. http://hdl.handle.net/20.500.12708/114379 ( reposiTUm)

Merta, I., Mladenovic, A., Turk, J., Sajna, A., Mauko Pranjic, A., & Poletanovic, B. (2017). Sustainability of Natural Fibre Cementitious Composites. 6th International Conference on Non-Traditional Cement and Concrete, Brno, Czechia. http://hdl.handle.net/20.500.12708/114246 ( reposiTUm)

Merta, I. (2017). Natural fibre cementitious composites. Institute of Structural Mechanics, Faculty of Civil Engineering - Brno University of Technology, Brno, Czechia. http://hdl.handle.net/20.500.12708/114247 ( reposiTUm)

Poletanovic, B., & Merta, I. (2017). Life-cycle analysis of natural fiber mortar. Institute of Structural Mechanics, Faculty of Civil Engineering - Brno University of Technology, Brno, Czechia. http://hdl.handle.net/20.500.12708/114248 ( reposiTUm)

Veselý, V., Kersner, Z., & Merta, I. (2016). Quasi-brittle behaviour of composites as a key to generalized understanding of material fracture. SPACE 2016 - 3. Int. Conference, High Tatras, Slovakia. http://hdl.handle.net/20.500.12708/113932 ( reposiTUm)

Merta, I. (2012). Naturfaserbeton. Innovative Baustoffe - Einsatz in Sanierung und Neubau, Wirtschaftskammer Wien, Austria. http://hdl.handle.net/20.500.12708/112425 ( reposiTUm)

Merta, I. (2009). Cost-Optimum Design of Reinforced Concrete T-Section Beams. The Third International Conference on Modeling, Simulation and Applied Optimization, Sharjah, United Arab Emirates, Non-EU. http://hdl.handle.net/20.500.12708/111088 ( reposiTUm)

Merta, I. (2009). Cost-Optimum Design of Singly Reinforced Concrete Beams with Rectangular Cross-Section. Canadian Society for Civil Engineering 2009 Anual Conference, St. John’s, Newfoundland, Canada, Non-EU. http://hdl.handle.net/20.500.12708/111158 ( reposiTUm)

Merta, I. (2008). Seismic shear strength model of reinforced concrete circular cross-section members. 7th International Congress CONCRETE, Dundee, Scotland, EU. http://hdl.handle.net/20.500.12708/110989 ( reposiTUm)

Merta, I., Kravanja, S., & Klansek, U. (2008). Optimization based cost comparison between reinforced concrete and steel beams. Fourth International Conference on High Performance Structures and Materials, The Algarve, Portugal, EU. http://hdl.handle.net/20.500.12708/110817 ( reposiTUm)

Merta, I., & Kolbitsch, A. (2007). Shear Capacity Model of Reinforced Concrete Circular Cross-Section Members. 5th International Conference on Concrete Under Severe Conditions Environment and Loading, Tours, France, EU. http://hdl.handle.net/20.500.12708/110492 ( reposiTUm)

Merta, I., & Kolbitsch, A. (2006). Effective Shear Area of Uniformly Reinforced Concrete Circular Sections. First European Conference on Earthquake Engineering and Seismology (1st ECEES), Genf, Non-EU. http://hdl.handle.net/20.500.12708/110344 ( reposiTUm)

Merta, I. (2004). Shear Strength of Reinforced Concrete Circular Cross Section Members. 5th International Conference on Fracture Mechanics of Concrete and Concrete Structures, Vail, Colorado, USA, Austria. http://hdl.handle.net/20.500.12708/109254 ( reposiTUm)

Merta, I. (2004). Shear Strength of Reinforced Concrete Circular cross Section Members. Fourth International Conference on Concrete under Severe Conditions: Enviroment and Loading, Seoul, Korea, Austria. http://hdl.handle.net/20.500.12708/109649 ( reposiTUm)

Poletanovic, B., & Merta, I. (2024). Finale report of the project “Eco-based alkali-activated composites containing recycled aggregates’’. https://doi.org/10.34726/6039 ( reposiTUm)

Poletanovic, B., & Merta, I. (2024). Finale report of the project “Mechanical fracture quantification of role of hemp fibres on self-healing processes in selected composites (KvaRK)’’. https://doi.org/10.34726/6279 ( reposiTUm)

Poletanovic, B., & Merta, I. (2024). Final report “BIO-based cementitious composites with recycled aggregates (BIO-gates).” https://doi.org/10.34726/7121 ( reposiTUm)

Poletanovic, B., & Merta, I. (2022). RIS-ALiCE Deliverable Report 2.7. http://hdl.handle.net/20.500.12708/40530 ( reposiTUm)

Poletanovic, B., & Merta, I. (2022). Final Report for the Project No. CZ 17/2020. http://hdl.handle.net/20.500.12708/40500 ( reposiTUm)

Yaneva, E., Merta, I., Pinto, M. T., & Lopez, L. (2021). Workshop on innovation and entrepreneurship skills development based on INTERMIN and TrainESEE experiences. http://hdl.handle.net/20.500.12708/40484 ( reposiTUm)

Poletanovic, B., Merta, I., Yaneva, E., & Dolenec, S. (2021). RIS-ALiCE Annual Newsletter Report. http://hdl.handle.net/20.500.12708/40485 ( reposiTUm)

Merta, I. (2021). Anual Report: Natural Fibre Reinforced Cementitious Composite For Sustainable Infrastructure. http://hdl.handle.net/20.500.12708/40488 ( reposiTUm)

Merta, I., & Yaneva, E. (2021). Report on the implementation workshops, Part 1: Teaching Methodology. http://hdl.handle.net/20.500.12708/40482 ( reposiTUm)

Merta, I., & Yaneva, E. (2021). Report on the implementation workshops, Part 5: Digital Pedagogy. http://hdl.handle.net/20.500.12708/40483 ( reposiTUm)

Merta, I. (2021). Anual Report: Integrity and durability aspects of recycled aggregates composites. http://hdl.handle.net/20.500.12708/40487 ( reposiTUm)

Yaneva, E., & Merta, I. (2021). Mein Betonkoffer: der Schritt für Schritt Leitfaden. http://hdl.handle.net/20.500.12708/40486 ( reposiTUm)

Poletanovic, B., & Merta, I. (2021). Report for dissemination and networking activities. http://hdl.handle.net/20.500.12708/40517 ( reposiTUm)

Robisson, A., Deix, K., Liberto, T., Kirnbauer, J., Stöttner, R., Lebeda, C., & Merta, I. (2019). Systematische Charakterisierung der Eigenschaften von Frischbetonen und Mörteln - Jahr 1. http://hdl.handle.net/20.500.12708/191653 ( reposiTUm)

Merta, I., & Kopecsko, K. (2018). Verbesserung des Langzeitverhaltens nachhaltiger zementgebundener Verbundwerkstoffe mit Faserimpregnierung (95öu6). http://hdl.handle.net/20.500.12708/39516 ( reposiTUm)

Merta, I., & Mladenovic, A. (2018). Durability of Sustainable Natural Fibre Cementitious Composites in Alpine Regions (DuS NFCC) (SI 18/2016). http://hdl.handle.net/20.500.12708/39515 ( reposiTUm)

Merta, I. (2018). Biaxial Fracture Mechanical Properties of Natural Fibre Concrete (T 503-N13). http://hdl.handle.net/20.500.12708/39514 ( reposiTUm)

Merta, I. (2017). Natural fibre concrete under biaxial load - advanced evaluation of experimental results using complex fracture mechanics methods. http://hdl.handle.net/20.500.12708/39278 ( reposiTUm)

Merta, I., Veselý, V., Kersner, Z., Seitl, S., Schneemayer, A., & Simonová, H. (2016). Development of new testing configurations for determination of relevant values of fracture characteristics of cementitious composites (DeTeCon) (CZ 07/2014). http://hdl.handle.net/20.500.12708/38978 ( reposiTUm)

Merta, I., & Schneemayer, A. (2015). Feasibility study - advanced fibres for crack resistance and energy dissipation capacity improvement of cementitious composites (Durchführbarkeitsstudie für den DELTA BLOC Anwendungsfall) (15/10). http://hdl.handle.net/20.500.12708/38979 ( reposiTUm)

Merta, I. (2015). Kurzbericht: Biaxial Fracture Mechanical Properties of natural fibre concrete (T 503-N13). http://hdl.handle.net/20.500.12708/38980 ( reposiTUm)

Merta, I. (2014). Foam concrete reinforced with hemp fibers. http://hdl.handle.net/20.500.12708/38500 ( reposiTUm)

Merta, I. (2014). Kurzbericht: Biaxial Fracture Mechanical Properties of natural fibre concrete (T 503-N13). http://hdl.handle.net/20.500.12708/38981 ( reposiTUm)

Merta, I. (2013). Kurzbericht: Biaxial Fracture Mechanical Properties of natural fibre concrete (T 503-N13). http://hdl.handle.net/20.500.12708/38982 ( reposiTUm)

Merta, I. (2012). Kurzbericht: Biaxial Fracture Mechanical Properties of natural fibre concrete (T 503-N13). http://hdl.handle.net/20.500.12708/38983 ( reposiTUm)

Merta, I. (2011). Durability of hemp fibres in the alkaline environment of cement matrix. http://hdl.handle.net/20.500.12708/38499 ( reposiTUm)

Merta, I. (2010). Mixed-Integer Non-Linear Programming (MINLP) Optimization of Simply Supported Reinforced Concrete Beams with Rectangular Cross-section (MOEL 425). http://hdl.handle.net/20.500.12708/38498 ( reposiTUm)

Kočica, J., Ducman, V., & Merta, I. (2024). Recycled Concrete meets Art [Architectual and Urban Design]. ( reposiTUm)