Weissenböck, J., Fröhler, B., Gröller, E., Kastner, J., & Heinzl, C. (2019). Dynamic Volume Lines: Visual Comparison of 3D Volumes through Space-filling Curves. IEEE Transactions on Visualization and Computer Graphics, 25(1), 1040–1049. https://doi.org/10.1109/tvcg.2018.2864510 ( reposiTUm)

Reh, A., Amirkhanov, A., Kastner, J., Gröller, E., & Heinzl, C. (2015). Fuzzy feature tracking. Computers and Graphics, 53, 177–184. https://doi.org/10.1016/j.cag.2015.04.001 ( reposiTUm)

Salaberger, D., Jerabek, M., Koch, T., & Kastner, J. (2015). Consideration of accuracy of quantitative X-ray CT analyses for short-glass-fibre-reinforced polymers. Materials Science Forum, 825–826, 907–913. https://doi.org/10.4028/www.scientific.net/msf.825-826.907 ( reposiTUm)

Fröhler, B., Amirkhanov, A., Kastner, J., Gröller, E., & Heinzl, C. (2014). Multimodal Visualization and Analysis of Spectral and XCT Data. Computer Graphics Forum, 33(3), 91–100. http://hdl.handle.net/20.500.12708/158031 ( reposiTUm)

Reh, A., Gusenbauer, C., Kastner, J., Gröller, E., & Heinzl, C. (2013). MObjects - A Novel Method for the Visualization and Interactive Exploration of Defects in Industrial XCT Data. IEEE Transactions on Visualization and Computer Graphics, 19(12), 2906–2915. https://doi.org/10.1109/tvcg.2013.177 ( reposiTUm)

Kastner, J., Plank, B., & Requena, G. (2012). Non-destructive characterisation of polymers and Al-alloys by polychromatic cone-beam phase contrast tomography. Materials Characterization, 64, 79–87. https://doi.org/10.1016/j.matchar.2011.12.004 ( reposiTUm)

Amirkhanov, A., Heinzl, C., Reiter, M., Kastner, J., & Gröller, E. (2011). Projection-Based Metal-Artifact Reduction for Industrial 3D X-ray Computed Tomography. IEEE Transactions on Visualization and Computer Graphics, 17(12), 2193–2202. https://doi.org/10.1109/tvcg.2011.228 ( reposiTUm)

Gierl, C., Harrer, B., Danninger, H., Kastner, J., & Schneider, R. (2011). X-ray computed tomography for quantification of secondary pore structures im PM steels. Powder Metall. Progress, 11(1–2), 85–89. http://hdl.handle.net/20.500.12708/162439 ( reposiTUm)

Kastner, J., Harrer, B., & Degischer, H. P. (2010). High resolution cone beam X-ray computed tomography of 3D-microstructures of cast Al-alloys. Materials Characterization, 62(1), 99–107. https://doi.org/10.1016/j.matchar.2010.11.004 ( reposiTUm)

Kastner, J., Harrer, B., Requena, G., & Brunke, O. (2010). A comparative study of high resolution cone beam X-ray tomography and synchrotron tomography applied to Fe- and Al-alloys. NDT and E International: Independent Nondestructive Testing and Evaluation, 43(7), 599–605. https://doi.org/10.1016/j.ndteint.2010.06.004 ( reposiTUm)

Heinzl, C., Kastner, J., & Gröller, E. (2007). Surface Extraction from Multi-Material Components for Metrology using Dual Energy CT. IEEE Transactions on Visualization and Computer Graphics, 13(6), 1520–1527. http://hdl.handle.net/20.500.12708/169670 ( reposiTUm)

Salaberger, D., Kastner, J., Heinzl, C., Gröller, E., & Amirkhanov, A. (2017). Comparison of Final Fracture Extraction Techniques for Interrupted In situ Tensile Tests of Glass Fiber Reinforced Polymers. In Proceedings of 7th Conference on Industrial Computed Tomography. iCT, Leuven, Belgium. http://hdl.handle.net/20.500.12708/57004 ( reposiTUm)

Rao, G., Salaberger, D., Kastner, J., Heinzl, C., & Amirkhanov, A. (2017). Damage characterization in SFRP using X-ray computed tomography after application of incremental and interrupted in situ quasi static tensile loading. In Proceedings of 7th Conference on Industrial Computed Tomography. iCT, Leuven, Belgium. http://hdl.handle.net/20.500.12708/57003 ( reposiTUm)

Weissenböck, J., Amirkhanov, A., Gröller, E., Kastner, J., & Heinzl, C. (2016). PorosityAnalyzer: Visual Analysis and Evaluation of Segmentation Pipelines to Determine the Porosity in Fiber-Reinforced Polymers. In Proceedings VAST 2016 (pp. 101–110). http://hdl.handle.net/20.500.12708/56903 ( reposiTUm)

Salaberger, D., Oberpeilsteiner, S., Kastner, J., Koch, T., & Palmstingl, M. (2013). Modellierung von Schädigungsmechanismen von kurzfaserverstärkten Polymeren mit Hilfe von Computertomografie. In Fortschritte in der Werkstoffprüfung für Forschung und Praxis (p. 6). Verlag Stahleisen GmbH. http://hdl.handle.net/20.500.12708/66918 ( reposiTUm)

Salaberger, D., Koch, T., Voronko, Y., Seidler, S., & Kastner, J. (2012). Comparison of particle size distributions derived from 2D and 3D analysis for particle filled polymers. In Book of Abstracts (p. 95). http://hdl.handle.net/20.500.12708/66710 ( reposiTUm)

Rodríguez-Hortalá, M., Salaberger, D., Hernández, S., Holzmeier, M., Degischer, H.-P., & Kastner, J. (2011). Characterisation of defects in carbon fibre reinforced polymers (CFRP). In Tagungsband zum 18. Symposium Verbundwerkstoffe und Werkstoffverbunde (pp. 208–215). TU Chemnitz. http://hdl.handle.net/20.500.12708/66404 ( reposiTUm)

Harrer, B., Degischer, H.-P., & Kastner, J. (2010). Microfocus Computed X-Ray Tomography of Segregations in High Strength Aluminium Alloys. In 10th European Conference on Non-Destructive Testing (p. 8). http://hdl.handle.net/20.500.12708/66163 ( reposiTUm)

Heinzl, C., Kastner, J., Möller, T., & Gröller, E. (2008). Statistical Analysis of Multi-Material Components using Dual Energy CT. In O. Deussen, D. Keim, & D. Saupe (Eds.), Proceedings VMV 2008 (pp. 179–188). http://hdl.handle.net/20.500.12708/52366 ( reposiTUm)

Harrer, B., Plank, B., Moore, D., Kastner, J., & Degischer, H.-P. (2008). Röntgen-Computertomographie von Heterogenitäten in Eisenwerkstoffen. In Proceedings - Industrielle Computertomographie (pp. 89–95). Shaker. http://hdl.handle.net/20.500.12708/65751 ( reposiTUm)

Harrer, B., Gierl, C., Danninger, H., Kastner, J., & Schneider, R. (2008). Röntgen-Computertomographie zur Quantifizierung von Porenstrukturen in Sintereisen. In R. Schneider (Ed.), Tagungsband Welser Werkstoffkolloquium 2008 (pp. 27–32). http://hdl.handle.net/20.500.12708/46071 ( reposiTUm)

Harrer, B., Winkler, W., Pissenberger, E., Kastner, J., & Degischer, H.-P. (2007). Röntgen-Computertomographie zur Charakterisierung von Inhomogenitäten in Gussgefügen von Aluminium und Stahl. In G. Petzow (Ed.), Sonderbände der Praktischen Metallographie 39, Fortschritte in der Metallographie (pp. 131–136). http://hdl.handle.net/20.500.12708/65630 ( reposiTUm)

Harrer, B., Kastner, J., Kottar, A., & Degischer, H.-P. (2007). Charakterisierung von Inhomogenitäten in metallischen Gusswerkstoffen mittels 3D-Röntgen-Computertomographie. In ZfP in Forschung, Entwicklung und Anwendung (p. 11). Deutsche Gesellschaft für Zerstörungsfreie Prüfung e.V. http://hdl.handle.net/20.500.12708/65629 ( reposiTUm)

Heinzl, C., Kastner, J., & Gröller, E. (2006). Reproducible Surface Extraction for Variance Comparison in 3D Computed Tomography. In Proceedings of 9th European Congress on Non-Destructive Testing (ECNDT 2006). European Congress on Non-Destructive Testing (ECNDT), Berlin, Deutschland, EU. http://hdl.handle.net/20.500.12708/51498 ( reposiTUm)

Heinzl, C., Klingesberger, R., Kastner, J., & Gröller, E. (2006). Robust Surface Detection for Variance Comparison and Dimensional Measurement. In B. Sousa Santos, T. Ertl, & K. Joy (Eds.), Data Visualization/ Eurovis 2006. http://hdl.handle.net/20.500.12708/51468 ( reposiTUm)

Tomic, B., Harrer, B., Kottar, A., Degischer, H.-P., Zeipper, L., & Kastner, J. (2006). Charakterisierung der Graphitverteilung in Sphäroguss. In Fortschritte in der Metallographie. Sonderbände der Praktischen Metallographie (pp. 113–120). http://hdl.handle.net/20.500.12708/65457 ( reposiTUm)

Fröhler, B., Amirkhanov, A., Kastner, J., Gröller, E., & Heinzl, C. (2015). Multimodal Visualization and Analysis of Spectral and XCT Data. 9. Forschungsforum der Österreichischen Fachhochschulen, FH OÖ Campus Hagenberg, Austria. http://hdl.handle.net/20.500.12708/86257 ( reposiTUm)

Kastner, J., Baumgartner, S., Plank, B., Harrer, B., Gusenbauer, C., Requena, G., & Garces, G. (2013). Microstructure characterization of thermomechanically treated Al- and Mg-alloys by high resolution X-ray computed tomography. EUROMAT 2013, Sevilla, EU. http://hdl.handle.net/20.500.12708/93760 ( reposiTUm)

Amirkhanov, A., Heinzl, C., Reiter, M., Kastner, J., & Gröller, E. (2011). Projection-Based Metal-Artifact Reduction for Industrial 3D X-ray Computed Tomography. IEEE Vis Week 2011, Providence, RI, USA, Non-EU. http://hdl.handle.net/20.500.12708/85188 ( reposiTUm)

Reiter, M., Malik, M. M., Heinzl, C., Salaberger, D., Gröller, E., Lettenbauer, H., & Kastner, J. (2009). Improvement of X-Ray image acquisition using a GPU based 3DCT simulation tool. International Conference on Quality Control by Artificial Vision, Wels, Austria. http://hdl.handle.net/20.500.12708/84946 ( reposiTUm)

Heinzl, C., Kastner, J., & Gröller, E. (2007). Surface Extraction from Multi-Material Components for Metrology using Dual Energy CT. IEEE Visualization, Minneapolis, USA, Austria. http://hdl.handle.net/20.500.12708/84641 ( reposiTUm)

Harrer, B., Kastner, J., & Degischer, H.-P. (2007). Geometrieeinfluss der Probe auf die Detektierbarkeit von Poren. http://hdl.handle.net/20.500.12708/34829 ( reposiTUm)

Harrer, B., Kastner, J., Kottar, A., Knoblich, H., & Degischer, H.-P. (2006). Voruntersuchungen an homogenisierten Barren 2024.4: 18273 für AMAG rolling GmbH. http://hdl.handle.net/20.500.12708/34831 ( reposiTUm)

Harrer, B., Kastner, J., & Degischer, H.-P. (2006). Kurzbericht zur Detektion von NME an Bramme 730436-3-5 mit Computertomopraphie. http://hdl.handle.net/20.500.12708/34830 ( reposiTUm)

Kastner, J. (2011). X-ray computed tomography for the development of materials and components [Professorial Dissertation, Technische Universität Wien]. reposiTUm. http://hdl.handle.net/20.500.12708/159002 ( reposiTUm)