Wissenschaftliche Artikel

Haubner, R., & Strobl, S. (2024). Examination of archaeological bronze parts using micro-computed tomography and metallography. PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY, 61(4), 216–231. https://doi.org/10.1515/pm-2024-1054 ( reposiTUm)

Haubner, R. (2024). Montanarchäologie. BHM Berg- und Hüttenmännische Monatshefte, 169, 469–469. https://doi.org/10.1007/s00501-024-01498-w ( reposiTUm)

Scheiblechner, W., Strobl, S., & Haubner, R. (2024). Analysen an alten Kris-Dolchen sowie Nachschmiedung eines Dolchs. BHM Berg- und Hüttenmännische Monatshefte, 169(9), 510–515. https://doi.org/10.1007/s00501-024-01488-y ( reposiTUm)

Haubner, R., & Strobl, S. (2024). Untersuchung einer Bronzespitze aus den Mallnitzer Tauern. BHM Berg- und Hüttenmännische Monatshefte, 169(9), 483–489. https://doi.org/10.34726/7120 ( reposiTUm)

Cloeren, H.-H., Haubner, R., & Strobl, S. (2024). Metallography of tailings from the Mansfeld copper mining area. PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY, 61(9–10), 575–588. https://doi.org/10.1515/pm-2024-0057 ( reposiTUm)

Haubner, R., Strobl, S., & Leskovar, J. (2024). Examinations on small bronze items from the Hallstatt period burial ground at Mitterkirchen in Upper Austria. PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY, 61(9–10), 630–641. https://doi.org/10.1515/pm-2024-0062 ( reposiTUm)

Strobl, S., & Haubner, R. (2024). Microstructures of iron meteorites. PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY, 61(9–10), 679–691. https://doi.org/10.1515/pm-2024-0063 ( reposiTUm)

Haubner, R., Strobl, S., Ball, G., Linhardt, P., & Biezma, M. V. (2024). Effects of heat treatment on the microstructure and corrosion behavior of manganese aluminum bronzes. PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY, 61(9–10), 769–782. https://doi.org/10.1515/pm-2024-0068 ( reposiTUm)

Haubner, R., Strobl, S., & Leskovar, J. (2024). Material Studies on Decorative Buttons from the Hallstatt Period Tumuli in Mitterkirchen, Marchland, Upper Austria. Metallography, Microstructure, and Analysis, 13(6), 1119–1130. https://doi.org/10.1007/s13632-024-01131-9 ( reposiTUm)

Karl, S., Modl, D., Strobl, S., & Haubner, R. (2024). Marmorgewinnung und Schmiedetätigkeit im Frühmittelalter – Ein erster Hinweis im Steinbruchrevier Spitzelofen in Kärnten/Österreich. BHM Berg- und Hüttenmännische Monatshefte, 169(9), 497–509. https://doi.org/10.1007/s00501-024-01490-4 ( reposiTUm)

Pronina, A., Strobl, S., & Haubner, R. (2024). Eine stark korrodierte Römische Münze aus Kupfer-Blei von Carnuntum. BHM Berg- und Hüttenmännische Monatshefte, 169(9), 490–496. https://doi.org/10.1007/s00501-024-01503-2 ( reposiTUm)

Fritzl, M., Konrad, M., Strobl, S., & Haubner, R. (2024). Bronze Gewandbesatzteile aus Brandbestattungen vom Fundort Inzersdorf ob der Traisen. BHM Berg- und Hüttenmännische Monatshefte, 169(9), 470–482. https://doi.org/10.1007/s00501-024-01502-3 ( reposiTUm)

Haubner, R., Strobl, S., Fritzl, M., & Konrad, M. (2024). Gefügeveränderungen an Bronzeteilen während experimenteller archäologischer Kremierungen. BHM Berg- und Hüttenmännische Monatshefte, 169(3), 104–110. https://doi.org/10.1007/s00501-024-01427-x ( reposiTUm)

Haubner, R., & Strobl, S. (2023). Slag from Modern Copper Production Found in Bergwerk, Burgenland, Austria. Solid State Phenomena, 341, 11–16. https://doi.org/10.4028/p-4zdd71 ( reposiTUm)

Strobl, S., Scheiblechner, W., & Haubner, R. (2023). Metallographic preparation of a composite of meteorite iron, steel, pure iron, and nickel manufactured by the Damascus technique. Praktische Metallographie, 60(9), 556–568. https://doi.org/10.1515/pm-2023-1052 ( reposiTUm)

Haubner, R. (2023). Garment buttons from a Hallstatt period tumulus. Praktische Metallographie, 60(5), 276–288. https://doi.org/10.1515/pm-2022-1021 ( reposiTUm)

Haubner, R., & Strobl, S. (2023). Investigations on Copper Cast Cakes, Sickle Fragments and a Spout Axe of the Hoard Find from Drassburg/Burgenland. Metallography, Microstructure, and Analysis, 12, 187–201. https://doi.org/10.1007/s13632-023-00936-4 ( reposiTUm)

Haubner, R. (2023). For THEY do not know what THEY are doing. Praktische Metallographie, 60(5), 331–342. https://doi.org/10.1515/pm-2023-0027 ( reposiTUm)

Haubner, R., & Strobl, S. (2023). Considerations on copper smelting from fahlores and the metallurgy of Cu-As bronzes. BHM Berg- Und Hüttenmännische Monatshefte, 168(9), 434–444. https://doi.org/10.1007/s00501-022-01230-6 ( reposiTUm)

Modl, D., Strobl, S., & Haubner, R. (2023). Untersuchung eines Doppelspitzschlägels aus dem Umfeld der römischen Siedlung Michlhallberg nahe Altaussee (Steiermark, Österreich). BHM Berg- und Hüttenmännische Monatshefte, 168(9), 453–467. https://doi.org/10.1007/s00501-023-01380-1 ( reposiTUm)

Klemm, S., Strobl, S., & Haubner, R. (2023). Spuren der bronzezeitlichen Kupferverhüttung in der Radmer, Steiermark, Österreich. BHM Berg- und Hüttenmännische Monatshefte, 168(9), 414–424. https://doi.org/10.1007/s00501-023-01362-3 ( reposiTUm)

Haubner, R. (2023). Montanarchäologie. BHM Berg- und Hüttenmännische Monatshefte, 168(9), 393–393. https://doi.org/10.1007/s00501-023-01377-w ( reposiTUm)

Ostermann, M., & Haubner, R. (2023). Deposition of nano-crystalline tungsten carbide powders from gaseous WO₂(OH)₂. Tungsten, 5, 136–144. https://doi.org/10.1007/s42864-022-00142-9 ( reposiTUm)

Haubner, R., & Strobl, S. (2023). Direct Production of Tin Bronzes from Copper and Cassiterite. Materials Science Forum, 1081, 137–142. https://doi.org/10.4028/p-s4jt77 ( reposiTUm)

Strobl, S., & Haubner, R. (2023). Characterisation of a San Mai Steel Composite for the Manufacture of Knives. Materials Science Forum, 1082, 183–188. https://doi.org/10.4028/p-5jp4r1 ( reposiTUm)

Biezma, M. V., Strobl, S., Linhardt, P., Ball, G., & Haubner, R. (2023). Dezincification in cast and heat-treated alpha-beta brass samples. Praktische Metallographie, 60(10), 632–642. https://doi.org/10.1515/pm-2023-1053 ( reposiTUm)

Linhardt, P., Biezma, M. V., Strobl, S., & Haubner, R. (2023). Influence of Cavitation in Seawater on the Etching Attack of Manganese-Aluminum-Bronzes. Solid State Phenomena, 341, 25–30. https://doi.org/10.4028/p-7nbo00 ( reposiTUm)

Linhardt, P., Biezma, M. V., Haubner, R., Schuster, R., & Wojcik, T. (2023). Hollow wire corrosion of stainless steel ropes in a marine mooring system and its relation to microstructure. Materials and Corrosion, 74(6), 818–830. https://doi.org/10.1002/maco.202213699 ( reposiTUm)

Haubner, R., Strobl, S., & Trebsche, P. (2023). Materialographic investigations of plate slags from the Late Bronze Age copper production site of Prigglitz-Gasteil (Lower Austria). Journal of Archaeological Science: Reports, 48, Article 103838. https://doi.org/10.1016/j.jasrep.2023.103838 ( reposiTUm)

Pechtl, J., Strobl, S., & Haubner, R. (2023). Ein Kupferbeil aus der frühen Kupferzeit vom Heuberg bei Ohlstadt, Deutschland. BHM Berg- und Hüttenmännische Monatshefte, 168(9), 406–413. https://doi.org/10.1007/s00501-022-01310-7 ( reposiTUm)

Thurner, M., Strobl, S., & Haubner, R. (2023). Gemeinsame Verhüttung von Chalkopyrit und Antimonit in einer Schmelzgrube. BHM Berg- und Hüttenmännische Monatshefte, 168(9), 425–433. https://doi.org/10.1007/s00501-022-01282-8 ( reposiTUm)

Strobl, S., Scheiblechner, W., & Haubner, R. (2022). Metallographic characterization of a gold-steel composite. Praktische Metallographie, 59(8–9), 545–556. https://doi.org/10.1515/pm-2022-1015 ( reposiTUm)

Haubner, R., & Strobl, S. (2022). Microstructure of an extraordinary Bronze Age copper ingot with a high antimony content. Praktische Metallographie, 59(12), 732–748. https://doi.org/10.1515/pm-2022-1004 ( reposiTUm)

Haubner, R. (2022). Editorial. Praktische Metallographie, 59(12), 719–719. https://doi.org/10.1515/pm-2022-0070 ( reposiTUm)

Haubner, R., & Strobl, S. (2022). Slags from Bronze Age copper production in Acqua Fredda. Praktische Metallographie, 59(12), 720–731. https://doi.org/10.1515/pm-2022-1003 ( reposiTUm)

Haubner, R., & Strobl, S. (2022). Metallography on a sickle fragment from the Drassburg/Burgenland hoard find. Praktische Metallographie, 59(12), 749–760. https://doi.org/10.1515/pm-2022-1005 ( reposiTUm)

Ostermann, M., Dalbauer, V., Schubert, W.-D., & Haubner, R. (2022). Preparation of nano-crystalline tungsten powders from gaseous WO₂(OH)₂. Tungsten, 4(1), 60–66. https://doi.org/10.1007/s42864-021-00118-1 ( reposiTUm)

Scheiblechner, W., Schubert, W.-D., Strobl, S., & Haubner, R. (2022). A heavenly sword – forging a Campo del Cielo meteorite. Praktische Metallographie, 59(8–9), 445–458. https://doi.org/10.1515/pm-2022-1016 ( reposiTUm)

Biezma, M. V., Gómez de la Rasilla, O., Haubner, R., & Linhardt, P. (2022). Etching of Manganese Aluminum Bronze by Ultrasound in Seawater. Praktische Metallographie, 59(5), 236–250. https://doi.org/10.1515/pm-2022-0027 ( reposiTUm)

Nimmervoll, M., Mori, G., Hönig, S., & Haubner, R. (2022). High-temperature corrosion of austenitic alloys in HCl and H₂S containing atmospheres under reducing conditions. Corrosion Science, 200, Article 110214. https://doi.org/10.1016/j.corsci.2022.110214 ( reposiTUm)

Nimmervoll, M., Mori, G., Bucher, E., Hönig, S., & Haubner, R. (2022). High temperature corrosion behavior of alloys in reducing HCl and H2S containing environments: Thermodynamical and experimental assessment. Materials and Corrosion, 73(12), 1979–2003. https://doi.org/10.1002/maco.202213329 ( reposiTUm)

Haubner, R. (2021). Low‑pressure diamond: from the unbelievable to technical products. ChemTexts, 7(10), Article 10. https://doi.org/10.1007/s40828-021-00136-z ( reposiTUm)

Haubner, R., & Strobl, S. (2021). Campo del Cielo – an Iron Meteorite found in Argentina. Praktische Metallographie, 58(9), 570–580. https://doi.org/10.1515/pm-2021-0047 ( reposiTUm)

Haubner, R. (2021). Vorwort. BHM Berg- und Hüttenmännische Monatshefte, 166(7), 335–335. https://doi.org/10.1007/s00501-021-01122-1 ( reposiTUm)

Karl, S., Modl, D., Strobl, S., & Haubner, R. (2021). Untersuchungen von Hammerschlag aus einer Schmiedeesse im römerzeitlichen Marmorsteinbruchrevier Spitzelofen in Kärnten, Österreich. BHM Berg- und Hüttenmännische Monatshefte, 166(7), 370–378. https://doi.org/10.1007/s00501-021-01123-0 ( reposiTUm)

Haubner, R. (2021). Cover Picture: Rennofen Ybbsitz. BHM Berg- Und Hüttenmännische Monatshefte, 166(7), 1. http://hdl.handle.net/20.500.12708/137792 ( reposiTUm)

Linhardt, P., Strobl, S., Böhm, J., Biezma, M. V., & Haubner, R. (2021). Heat Treatment Effect on the Microstructure and the Corrosion Resistance of Manganese-Aluminum Bronzes. Praktische Metallographie, 58(2), 72–82. https://doi.org/10.1515/pm-2020-0004 ( reposiTUm)

Haubner, R. (2021). Die prähistorische Kupfermetallurgie - allgemeine Betrachtungen. BHM Berg- und Hüttenmännische Monatshefte, 166(7), 343–351. https://doi.org/10.1007/s00501-020-01056-0 ( reposiTUm)

Haubner, R., Strobl, S., Thurner, M., & Herdits, H. (2021). Ein bronzenes Griffzungenmesser aus dem Burgenland. BHM Berg- und Hüttenmännische Monatshefte, 166(7), 352–357. https://doi.org/10.1007/s00501-020-00982-3 ( reposiTUm)

Biezma, M. V., Linhardt, P., Strobl, S., & Haubner, R. (2021). Inﬂuence of Annealing Treatments on Welded CuNi Sheets on the Corrosion Behaviour in Sea Water. BHM Berg- Und Hüttenmännische Monatshefte, 166(9), 434–442. https://doi.org/10.1007/s00501-021-01131-0 ( reposiTUm)

Haubner, R., & Strobl, S. (2021). Arbeitskreis Archäometallographie. Jahresmagazin Materialographie Metallographie, INGENIEURWISSENSCHAFTEN 2021, 42–45. http://hdl.handle.net/20.500.12708/137878 ( reposiTUm)

Haubner, R., & Strobl, S. (2021). Microstructural Examinations of Copper Antimony Alloys. Praktische Metallographie, 58(10), 620–629. https://doi.org/10.1515/pm-2021-0054 ( reposiTUm)

Strobl, S., & Haubner, R. (2021). Porosity in Medical Drills Caused by Fractured Carbides – A Review. Praktische Metallographie, 58(9), 594–603. https://doi.org/10.1515/pm-2021-0049 ( reposiTUm)

Scheiblechner, W., Karl, S., Modl, D., Strobl, S., & Haubner, R. (2021). Untersuchung eines Doppelspitzschlägels aus dem römerzeitlichen Marmorsteinbruchrevier Spitzelofen in Kärnten, Österreich. BHM Berg- und Hüttenmännische Monatshefte, 166(7), 363–369. https://doi.org/10.1007/s00501-021-01086-2 ( reposiTUm)

Nimmervoll, M., Schmid, A., Mori, G., Hönig, S., & Haubner, R. (2021). Surface sulphide formation on high-temperature corrosion resistant alloys in a H2S-HCl-CO2 mixed atmosphere. Corrosion Science, 181(109241), 109241. https://doi.org/10.1016/j.corsci.2021.109241 ( reposiTUm)

Nimmervoll, M., Mori, G., Bucher, E., Schmid, A., & Haubner, R. (2021). Corrosion of N10276 in a H₂S, HCl, and CO₂ Containing Atmosphere at 480 ◦C and 680 ◦C. Metals, 11(11), 1817. https://doi.org/10.3390/met11111817 ( reposiTUm)

Nimmervoll, M., Mori, G., Bucher, E., Hönig, S., & Haubner, R. (2021). Effect of Varying H2S Content on High-Temperature Corrosion of Ferritic and Austenitic Alloys in a Simulated Pyrolysis Process of Post-Consumer Plastics. BHM Berg- Und Hüttenmännische Monatshefte, 166(9), 424–433. https://doi.org/10.1007/s00501-021-01126-x ( reposiTUm)

Haubner, R., Strobl, S., & Linhardt, P. (2020). Effects on microstructure and corrosion behavior of a heat treated CuZn36Pb2 brass. Defect and Diffusion Forum, 405, 333–338. https://doi.org/10.4028/www.scientific.net/ddf.405.333 ( reposiTUm)

Haubner, R., & Strobl, S. (2020). The Copper-Arsenic eutecticum and the Cu3As phase. Defect and Diffusion Forum, 405, 19–25. https://doi.org/10.4028/www.scientific.net/ddf.405.19 ( reposiTUm)

Strobl, S., & Haubner, R. (2020). Investigation of the diffusion couple ductile cast iron / iron. Defect and Diffusion Forum, 405, 54–59. https://doi.org/10.4028/www.scientific.net/ddf.405.54 ( reposiTUm)

Rauchenwald, E., Lessiak, M., Weissenbacher, R., Schwarz, S., & Haubner, R. (2020). Characterisation of chemical vapour deposited AlHfN coatings. Defect and Diffusion Forum, 405, 33–39. https://doi.org/10.4028/www.scientific.net/ddf.405.33 ( reposiTUm)

Haubner, R., & Strobl, S. (2020). Metallographische Untersuchung eines Kupferflachbeils aus der Kupferzeit. Jahresmagazin Materialographie Metallographie, INGENIEURWISSENSCHAFTEN 2020, 52–55. http://hdl.handle.net/20.500.12708/140882 ( reposiTUm)

Herdits, H., Thurner, M., Strobl, S., & Haubner, R. (2020). Ein “Mondseeflachbeil” aus Bernstein, Burgenland. Burgenländische Heimatblätter, 82(1–2), 93–100. http://hdl.handle.net/20.500.12708/140646 ( reposiTUm)

Haubner, R., Strobl, S., Thurner, M., & Herdits, H. (2020). Ein Kupfergusskuchen mit hohem Antimongehalt aus Velem/Westungarn. BHM Berg- Und Hüttenmännische Monatshefte, 165(9), 453–460. https://doi.org/10.1007/s00501-020-01017-7 ( reposiTUm)

Haubner, R., Strobl, S., Thurner, M., & Herdits, H. (2020). Ein Metallflachbeil der Kupferzeit aus Bernstein, Burgenland. BHM Berg- Und Hüttenmännische Monatshefte, 165(9), 447–452. https://doi.org/10.1007/s00501-020-00983-2 ( reposiTUm)

Schmid, A., Mori, G., & Haubner, R. (2020). Metallographic documentation of the degradation of iron and nickel based alloys in HCl and H2S containing environments, between 480 - 680 °C. Defect and Diffusion Forum, 405, 26–32. https://doi.org/10.4028/www.scientific.net/ddf.405.26 ( reposiTUm)

Strobl, S., Scheiblechner, W., & Haubner, R. (2019). Forging of Copper and Iron Plates by the Damascus Technique. Key Engineering Materials, 809, 253–258. https://doi.org/10.4028/www.scientific.net/kem.809.253 ( reposiTUm)

Rauchenwald, E., Lessiak, M., Weissenbacher, R., & Haubner, R. (2019). Chemical Vapour Deposition of AlZrN coatings by the reaction of in-situ produced ZrCl4 and AlCl3 with NH3. Key Engineering Materials, 809, 427–432. https://doi.org/10.4028/www.scientific.net/kem.809.427 ( reposiTUm)

Haubner, R., Strobl, S., Bichler, L. P., & Linhardt, P. (2019). Liquid Metal Embrittlement of Copper Brazed Plate Heat Exchangers. Key Engineering Materials, 809, 535–540. https://doi.org/10.4028/www.scientific.net/kem.809.535 ( reposiTUm)

Haubner, R., & Strobl, S. (2019). Liquid Metal Embrittlement during Hot Forming of Hot-Dip Galvanized Advanced High-Strength Unalloyed Steels (AHSS). Praktische Metallographie, 56(8), 523–531. https://doi.org/10.3139/147.110590 ( reposiTUm)

Strobl, S., Linhardt, P., & Haubner, R. (2019). Microbially Induced Pitting Corrosion on an Austenitic Stainless Steel Pipe. Praktische Metallographie, 56(10), 669–679. https://doi.org/10.3139/147.110588 ( reposiTUm)

Mödlinger, M., de Oro Calderon, R., & Haubner, R. (2019). Arsenic loss during metallurgical processing of arsenical bronze. Archaeological and Anthropological Sciences, 11(1), 133–140. https://doi.org/10.1007/s12520-017-0534-1 ( reposiTUm)

Rauchenwald, E., Lessiak, M., Weissenbacher, R., & Haubner, R. (2019). Chemical vapor deposition of ZrN using in situ produced ZrCl4 as a precursor (CH-4:L04). Ceramics International, 45(7), 9410–9414. https://doi.org/10.1016/j.ceramint.2018.08.191 ( reposiTUm)

Maderthaner, M., Jarosik, A., & Haubner, R. (2019). Charakterisierung von Intermetallischen Phasen bei Verzinkten Hochfesten Stählen Mittels Brom-Ätzung. BHM Berg- und Hüttenmännische Monatshefte, 164(5), 196–199. https://doi.org/10.1007/s00501-019-0849-6 ( reposiTUm)

Schmid, A., Mori, G., Bucher, E., & Haubner, R. (2019). Model About the Course of Corrosion Reactions of Austenitic Steels in H2S-, HCl- and CO2-Containing Atmospheres at 680 °C. Oxidation of Metals, 91(1–2), 1–10. https://doi.org/10.1007/s11085-018-9876-z ( reposiTUm)

Schmid, A., Mori, G., Hönig, S., Strobl, S., & Haubner, R. (2019). High Temperature Corrosion of Steel X15CrNiSi25-21 (1.4841) in a Mixed Gas Atmosphere - Sample Preparation and Damage Mechanism. Praktische Metallographie, 56(7), 457–468. https://doi.org/10.3139/147.110592 ( reposiTUm)

Haubner, R., & Schmid, A. (2018). Cover Picture: Materials and Corrosion. 10/2018. Materials and Corrosion, 69(10), 1319–1319. https://doi.org/10.1002/maco.201870101 ( reposiTUm)

Haubner, R., Rauchenwald, E., Lessiak, M., Pitonak, R., & Weissenbacher, R. (2018). NOVEL HIGH-PERFORMANCE CVD COATINGS FOR MACHINING APPLICATIONS. Powder Metallurgy Progress, 18(2), 128–138. https://doi.org/10.1515/pmp-2018-0015 ( reposiTUm)

Strobl, S., Haubner, R., & Scheiblechner, W. (2018). New Steel Combinations Produced by the Damascus Technique. Advanced Engineering Forum, 27, 14–21. https://doi.org/10.4028/www.scientific.net/aef.27.14 ( reposiTUm)

Strobl, S., Linhardt, P., Ball, G., & Haubner, R. (2018). Pitting Corrosion on a Water Pipe of the Grade 1.4301. Praktische Metallographie, 55(7), 468–477. https://doi.org/10.3139/147.110510 ( reposiTUm)

Haubner, R., & Strobl, S. (2018). Examination of Different Slags as By-Products of Late Bronze Age Copper Metallurgy. Praktische Metallographie, 55(2), 86–96. https://doi.org/10.3139/147.110492 ( reposiTUm)

Greil, S., Edtmaier, C., Haubner, R., & Lauter, L. (2018). Metallographische Untersuchung an Feingold und einer Gold-Kupferlegierung für die Münzherstellung. Praktische Metallographie, 55(6), 360–369. https://doi.org/10.3139/147.110524 ( reposiTUm)

Schmid, A., Mori, G., Strobl, S., & Haubner, R. (2018). Unusual Crack Formation on an Autoclave during Thermal Cracking Experiments on Anthropogenic Resources. Praktische Metallographie, 55(4), 244–253. https://doi.org/10.3139/147.110512 ( reposiTUm)

Schmid, A., Mori, G., Hönig, S., Weil, M., Strobl, S., & Haubner, R. (2018). Comparison of the high-temperature chloride-induced corrosion between duplex steel and Ni based alloy in presence of H2S. Corrosion Science, 139, 76–82. https://doi.org/10.1016/j.corsci.2018.04.042 ( reposiTUm)

Schmid, A., Mori, G., Haubner, R., Weil, M., & Hönig, S. (2018). Behaviour of S31400 and S32205 steels in HCl- and H₂S-containing gas atmospheres under a low oxygen partial pressure between 480 and 680 °C. Materials and Corrosion, 69(10), 1328–1337. https://doi.org/10.1002/maco.201709992 ( reposiTUm)

Greil, S., Edtmaier, C., Haubner, R., & Lauter, L. (2017). Metallographic Investigations of Silver Alloys Used for Minting. Materials Science Forum, 891, 89–94. https://doi.org/10.4028/www.scientific.net/msf.891.89 ( reposiTUm)

Haubner, R., Strobl, S., & Trebsche, P. (2017). Analysis of Urnfield period bronze droplets formed during casting. Materials Science Forum, 891, 41–48. https://doi.org/10.4028/www.scientific.net/msf.891.41 ( reposiTUm)

Ertl, F., Strobl, S., & Haubner, R. (2017). An ancient bronze ingot smelted from fahlore. Materials Science Forum, 891, 613–617. https://doi.org/10.4028/www.scientific.net/msf.891.613 ( reposiTUm)

Haubner, R., Ertl, F., & Strobl, S. (2017). Examinations of a Bronze Ingot Made of Fahlore. Praktische Metallographie, 54(2), 107–117. https://doi.org/10.3139/147.110446 ( reposiTUm)

Haubner, R., & Strobl, S. (2017). Slag investigations from Bronze Age copper smelting sites. Materials Science Forum, 891, 608–612. https://doi.org/10.4028/www.scientific.net/msf.891.608 ( reposiTUm)

Strobl, S., & Haubner, R. (2017). Metallographic investigations of a late medieval pick found at the gold mining site “Goldzeche - kleines Fleißtal”, Austria. Materials Science Forum, 891, 596–601. https://doi.org/10.4028/www.scientific.net/msf.891.596 ( reposiTUm)

Strobl, S., Haubner, R., Partlic, T., & Linhardt, P. (2017). Stress Corrosion Cracking on a Stainless Steel Container Triggered by the Ageing of a Polyurethane Insulation. Praktische Metallographie, 54(3), 153–162. https://doi.org/10.3139/147.110448 ( reposiTUm)

Strobl, S., Haubner, R., & Scheiblechner, W. (2017). Damascus Steel Inlay on a Sword Blade - Production and Characterization. Key Engineering Materials, 742, 333–340. https://doi.org/10.4028/www.scientific.net/kem.742.333 ( reposiTUm)

Haubner, R., & Lessiak, M. (2017). Deposition of CVD Diamond Coatings on Carbon Fiber Composite Substrates. Key Engineering Materials, 742, 419–426. https://doi.org/10.4028/www.scientific.net/kem.742.419 ( reposiTUm)

Edtmaier, C., Haubner, R., Zeiler, B., Danninger, H., & Ortner, H. (2017). Special Issue devoted to the 65th birthday of a.o.Univ. Prof. Dipl.-Ing. Dr.techn. Wolf-Dieter Schubert, Technische Universität Wien, Austria. International Journal of Refractory Metals and Hard Materials, 62, 85–86. https://doi.org/10.1016/j.ijrmhm.2016.07.018 ( reposiTUm)

Haubner, R., Lessiak, M., Pitonak, R., Köpf, A., & Weissenbacher, R. (2017). Evolution of conventional hard coatings for its use on cutting tools. International Journal of Refractory Metals and Hard Materials, 62, 210–218. https://doi.org/10.1016/j.ijrmhm.2016.05.009 ( reposiTUm)

Maderthaner, M., Jarosik, A., Angeli, G., & Haubner, R. (2017). 3rd Generation Hot-Dip Galvanized Steel Sheet for Automobile Manufacturing - Interface Reactions between Zinc and Metal Oxide. Key Engineering Materials, 742, 463–470. https://doi.org/10.4028/www.scientific.net/kem.742.463 ( reposiTUm)

Maderthaner, M., Jarosik, A., Angeli, G., & Haubner, R. (2017). Effect of dew point on the selective oxidation of advanced high strength steels. Materials Science Forum, 891, 292–297. https://doi.org/10.4028/www.scientific.net/msf.891.292 ( reposiTUm)

Haubner, R., Strobl, S., Zbiral, J., Gusenbauer, C., & Pintz, U. (2016). Metallurgical characterization of a coated Roman iron coin by analytical investigations. Archaeometry, 58(3), 441–452. http://hdl.handle.net/20.500.12708/148634 ( reposiTUm)

Haubner, R., & Strobl, S. (2016). Copper-Coated Roman Coins - Subferrati. Praktische Metallographie, 53(5), 273–294. https://doi.org/10.3139/147.110387 ( reposiTUm)

Strobl, S., & Haubner, R. (2016). Microstructural Characterization of Ferrous Materials Forged by the Damascus Technique. Materials Performance and Characterization, 5(5), MPC20160028. https://doi.org/10.1520/mpc20160028 ( reposiTUm)

Böhm, J., Linhardt, P., Strobl, S., Haubner, R., & Biezma, M. V. (2016). Microstructure of a Heat Treated Nickel-Aluminum Bronze and Its Corrosion Behavior in Simulated Fresh and Sea Water. Materials Performance and Characterization, 5(5), MPC20160029. https://doi.org/10.1520/mpc20160029 ( reposiTUm)

Strobl, S., & Haubner, R. (2015). Characterisation of steel composites produced by the Damascus technique. Materials Science Forum, 825–826, 852–859. https://doi.org/10.4028/www.scientific.net/msf.825-826.852 ( reposiTUm)

Strobl, S., Haubner, R., & Linhar, P. (2015). Corrosion of an Expansion Bellow. Praktische Metallographie, 52(2), 108–120. https://doi.org/10.3139/147.110281 ( reposiTUm)

Haubner, R., & Lessiak, M. (2015). Diamond coatings on carbon based substrates. Materials Science Forum, 825–826, 605–612. https://doi.org/10.4028/www.scientific.net/msf.825-826.605 ( reposiTUm)

Lessiak, M., Haubner, R., Pitonak, R., Köpf, A., & Weissenbacher, R. (2015). Gaseous ternary chromium-aluminium complexes as precursor for chemical vapour deposition. Physica Status Solidi C, 12(7), 1043–1046. http://hdl.handle.net/20.500.12708/150786 ( reposiTUm)

Ziebell, A., Schöppl, O., Haubner, R., & Konegger, T. (2015). Identification of bearing defects in hybrid thrust ball bearings by vibration analysis. Materials Science Forum, 825–826, 844–851. https://doi.org/10.4028/www.scientific.net/msf.825-826.844 ( reposiTUm)

Praig, V. G., Haubner, R., & Stöger-Pollach, M. (2014). Microstructure and Composition of Grain Boundary- and Intragranular Oxides in Low Alloy Mn-Cr, Mn-Al-Si and Si-Al-P Hot-rolled Steel Sheets. Praktische Metallographie, 51(11), 785–799. https://doi.org/10.3139/147.110175 ( reposiTUm)

Haubner, R., Strobl, S., Linhardt, P., & Halwax, E. (2014). Investigations on a defect sewer pipe, attacked by microbiologically produced acid. Materials Science Forum, 782, 275–278. https://doi.org/10.4028/www.scientific.net/msf.782.275 ( reposiTUm)

Strobl, S., & Haubner, R. (2014). Microstructural features of bronze-coated iron coins from the Roman Empire. Materials Science Forum, 782, 629–634. https://doi.org/10.4028/www.scientific.net/msf.782.629 ( reposiTUm)

Haubner, R., Schatz, I., Schatz, F., Scheiblechner, W., Schubert, W. D., & Strobl, S. (2014). Archaeometallurgical simulations of the processes in bloomery furnaces from the Hallstatt and medieval period. Materials Science Forum, 782, 641–644. https://doi.org/10.4028/www.scientific.net/msf.782.641 ( reposiTUm)

Haubner, R., & Strobl, S. (2014). Slag investigation from iron smelting and iron processing sites in Austria - from Hallstatt and medieval period and the 19th century. Materials Science Forum, 782, 635–640. https://doi.org/10.4028/www.scientific.net/msf.782.635 ( reposiTUm)

Meyer, M., Strobl, S., & Haubner, R. (2014). Microstructural investigations on Vespa scooter gear parts over a production period of 50 years. Materials Science Forum, 782, 197–200. https://doi.org/10.4028/www.scientific.net/msf.782.197 ( reposiTUm)

Ortner, H., & Haubner, R. (2013). Obituary for Em.O.Univ.Prof. Dipl.-Ing. Dr. Benno Lux. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 41, 1. https://doi.org/10.1016/j.ijrmhm.2013.03.003 ( reposiTUm)

Haubner, R., & Rudigier, M. (2013). Raman characterisation of diamond coatings using different laser wavelengths. Physics Procedia, 46, 71–78. https://doi.org/10.1016/j.phpro.2013.07.047 ( reposiTUm)

Haubner, R. (2013). The history of hard CVD coatings for tool applications at the University of Technology Vienna. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 41, 22–34. http://hdl.handle.net/20.500.12708/155260 ( reposiTUm)

Lessiak, M., & Haubner, R. (2013). Diamond coatings on hardmetal substrates with CVD coatings as intermediate layers. Surface and Coatings Technology, 230, 119–123. http://hdl.handle.net/20.500.12708/154560 ( reposiTUm)

Klemm, S., Strobl, S., & Haubner, R. (2012). Graglach von der Dreimärkte-Eisenstraße, Steiermark. Res Montanarum, 50, 88–98. http://hdl.handle.net/20.500.12708/164480 ( reposiTUm)

Rudigier, M., & Haubner, R. (2012). Characterisation of diamond coatings with different morphologies by Raman spectroscopy using various laser wavelengths. Analytical and Bioanalytical Chemistry, 403(3), 675–681. https://doi.org/10.1007/s00216-012-5808-y ( reposiTUm)

Klemm, S., Strobl, S., & Haubner, R. (2012). Archäologische Funde mittelalterlicher Eisenverhüttung und Holzkohlenproduktion im Nahbereich des Steirischen Erzberges. Res Montanarum, SONDERBAND 2012, 69–81. http://hdl.handle.net/20.500.12708/164131 ( reposiTUm)

Haubner, R., Strobl, S., & Henkel, A.-M. (2012). An Investigation into Porosity in Medical Drills caused by Broken Carbides. Praktische Metallographie, 49(4), 221–232. https://doi.org/10.3139/147.110161 ( reposiTUm)

Strobl, S., Haubner, R., & Linhardt, P. (2012). Microstructure and EPR Studies of 13 % Chromium Steels After Various Heat Treatments and the Influence of MnS on the EPR Test. Praktische Metallographie, 49(3), 155–170. https://doi.org/10.3139/147.110146 ( reposiTUm)

Pittenauer, E., Kassler, A., Haubner, R., & Allmaier, G. (2011). Different target surfaces for the analysis of peptides, peptide mixtures and peptide mass fingerprints by AP-MALDI ion trap mass spectrometry. Journal of Proteomics, 74(7), 975–981. https://doi.org/10.1016/j.jprot.2010.10.003 ( reposiTUm)

HABIB, A., STELZER, N., ANGERER, P., & HAUBNER, R. (2011). Effect of temperature and time on solvothermal synthesis of tetragonal BaTiO3. Bulletin of Materials Science, 34(1), 19–23. https://doi.org/10.1007/s12034-011-0043-2 ( reposiTUm)

Roy, M., & Haubner, R. (2010). Tribology of hard coatings. International Journal of Refractory Metals and Hard Materials, 28(1), 1. http://hdl.handle.net/20.500.12708/166630 ( reposiTUm)

Dittert, B., Bergmair, I., Haubner, R., & Schöftner, R. (2010). Micro fluid contact printing of sol-gel-derived in-situ formed catalysts for the structured growth of carbon nanotubes. Surface and Coatings Technology, 204, 3647–3651. http://hdl.handle.net/20.500.12708/167837 ( reposiTUm)

Haubner, R., & Kalss, W. (2010). Diamond deposition on hardmetal substrates - Comparison of substrate pre-treatments and industrial applications. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 28, 475–483. http://hdl.handle.net/20.500.12708/167810 ( reposiTUm)

Habib, A., Stelzer, N., & Haubner, R. (2009). Fabrication of BaTiO3-PMMA Polymer Nanocomposite Thin / Thick Films and their Dielectric Properties. Solid State Phenomena, 151, 108–112. http://hdl.handle.net/20.500.12708/165265 ( reposiTUm)

Haubner, R., Schwinger, W., Haring, J., & Schöftner, R. (2008). Sol-gel preparation of catalyst particles on substrates for hot-filament CVD nanotube deposition. Diamond and Related Materials, 17, 1452–1457. http://hdl.handle.net/20.500.12708/170963 ( reposiTUm)

Haubner, R., & Ullram, S. (2008). Influence of H2S addition during diamond deposition on hardmetal substrates. Diamond and Related Materials, 17, 1100–1105. http://hdl.handle.net/20.500.12708/170964 ( reposiTUm)

Habib, A., Haubner, R., & Stelzer, N. (2008). Effect of temperature, time and particle size of Ti precursor on hydrothermal synthesis of barium titanate. Materials Science and Engineering: B, 152, 60–65. http://hdl.handle.net/20.500.12708/170966 ( reposiTUm)

Gerger, I., & Haubner, R. (2008). The behaviour of Ti-substrates during deposition of boron doped diamond. International Journal of Refractory Metals and Hard Materials, 26, 438–443. http://hdl.handle.net/20.500.12708/170965 ( reposiTUm)

Bogus, A., Gebeshuber, I. C., Pauschitz, A., Roy, M., & Haubner, R. (2008). Micro- and nanomechanical properties of diamond film with various surface morphologies. Diamond and Related Materials, 17(12), 1998–2004. https://doi.org/10.1016/j.diamond.2008.06.010 ( reposiTUm)

Schwinger, W., Haring, J., Jantscher, A., Haubner, R., Gerger, I., Bodnarchuk, M., Kovalenko, M., Heiss, W., & Schöftner, R. (2008). Preparation of catalytic nano-particles and growth of aligned CNTs with HF-CVD. Journal of Physics: Conference Series, 100. http://hdl.handle.net/20.500.12708/171312 ( reposiTUm)

Gerger, I., & Haubner, R. (2007). Gradient layers of boron doped diamond on titanium substrates. Diamond and Related Materials, 16, 899–904. http://hdl.handle.net/20.500.12708/169394 ( reposiTUm)

Haubner, R., & Strobl, S. (2007). Metallographic studies on a defective plate heat exchanger. Praktische Metallographie, 44(5), 221–233. https://doi.org/10.3139/147.100339 ( reposiTUm)

Haubner, R., & Lux, B. (2006). Diamond deposition on steel substrates using intermediate layers. International Journal of Refractory Metals and Hard Materials, 24, 380–386. http://hdl.handle.net/20.500.12708/173170 ( reposiTUm)

Schubert, W.-D., Haubner, R., Danninger, H., Zeiler, B., Lassner, E., & Ortner, H. (2006). Editorial, Special Issue devoted to the 75th birthday of Em.O.Univ. Prof. Dipl.-Ing. Dr.techn. Benno LUX. International Journal of Refractory Metals and Hard Materials, 24, 351–352. http://hdl.handle.net/20.500.12708/173171 ( reposiTUm)

Weissenbacher, R., & Haubner, R. (2006). Deposition of B,C,N coatings on WC-Co substrates - analytical problems indicating c-BN formation. International Journal of Refractory Metals and Hard Materials, 24, 374–379. http://hdl.handle.net/20.500.12708/173169 ( reposiTUm)

Ullram, S., & Haubner, R. (2006). Temperature pre-treatments of hardmetal substrates to reduce the cobalt content and improve diamond deposition. Diamond and Related Materials, 15, 994–999. http://hdl.handle.net/20.500.12708/173168 ( reposiTUm)

Gerger, I., & Haubner, R. (2005). Cyclic voltammetry measurements on boron and nitrogen doped diamond layers. Diamond and Related Materials, 14, 369–374. http://hdl.handle.net/20.500.12708/172969 ( reposiTUm)

Haubner, R. (2005). Comparison of sulfur, boron, nitrogen and phosphorus additions during low-pressure diamond deposition. Diamond and Related Materials, 14, 355–363. http://hdl.handle.net/20.500.12708/172968 ( reposiTUm)

Bartl, A., Bohr, S., Haubner, R., & Lux, B. (1996). A Comparison of Low-Pressure CVD Synthesis of Diamond and c-BN. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 14, 145–157. http://hdl.handle.net/20.500.12708/174787 ( reposiTUm)

Beiträge in Tagungsbänden

Strobl, S., & Haubner, R. (2025). Roman bronze objects from the archaeological site of Burg in Burgenland, Austria. In M. Matvija & P. Horňak (Eds.), Abstract Booklet : Abstracts of Contributions from the 19th International Symposium on Metallography, Fractography and Materials Science - Metallography & Fractography 2025 (pp. 25–25). Technical University of Košice. ( reposiTUm)

Haubner, R., & Strobl, S. (2025). A bronze button from late bronze age site of Inzersdorf ob der Traisen. In M. Matvija & P. Horňak (Eds.), Abstract Booklet : Abstracts of Contributions from the 19th International Symposium on Metallography, Fractography and Materials Science - Metallography & Fractography 2025 (pp. 26–26). Technical University of Košice. ( reposiTUm)

Linhardt, P., Biezma, M. V., Strobl, S., & Haubner, R. (2025). Influence of Thermal Treatments on the Corrosion Behaviour of Nickel-Aluminium Bronze in Freshwater-like Aqueous Environment. In M. Matvija & P. Horňak (Eds.), Abstract Booklet : Abstracts of Contributions from the 19th International Symposium on Metallography, Fractography and Materials Science - Metallography & Fractography 2025 (pp. 73–73). Technical University of Košice. ( reposiTUm)

Haubner, R., & Strobl, S. (2025). Copper test melts with additions of Pb, Bi, As, Sb and Sn. In M. Matvija & P. Horňak (Eds.), Abstract Booklet : Abstracts of Contributions from the 19th International Symposium on Metallography, Fractography and Materials Science - Metallography & Fractography 2025 (pp. 27–27). Technical University of Košice. ( reposiTUm)

Linhardt, P., Biezma, M. V., Strobl, S., & Haubner, R. (2022). Influence of cavitation in seawater on the etching attack of manganese-aluminum-bronzes (MAB). In M. Matvija & P. Hornak (Eds.), Abstracts of Contributions from the 18th lnternational Symposium on Metallography, Fractography and Materials Science, METALLOGRAPHY & FRACTOGRAPHY 2022 (pp. 64–64). Technical University of Košice. http://hdl.handle.net/20.500.12708/63126 ( reposiTUm)

Haubner, R., Strobl, S., & Trebsche, P. (2021). Analytical investigations on plate slags from the late Urnfield Period copper mining settlement at Prigglitz-Gasteil (Lower Austria). In B. Török & A. Giumlia-Mair (Eds.), Monographies Instrumentum 73 - Proceedings of the 5th International Conference “Archaeometallurgy in Europe” (pp. 207–218). Editions Mergoil. http://hdl.handle.net/20.500.12708/49660 ( reposiTUm)

Calderon, R. de O., Strobl, S., & Haubner, R. (2020). Hartmetalle - Alternativbinder und Qualitätskontrolle. In A. Neidel (Ed.), Sonderbände der Praktischen Metallographie zur 54. Metallographie Tagung (pp. 45–50). http://hdl.handle.net/20.500.12708/49592 ( reposiTUm)

Strobl, S., & Haubner, R. (2020). Delta-Ferrit und Umformmartensit in austenitischen Stählen. In G. Petzow, F. Mücklich, & A. Neidel (Eds.), Sonderbände der Praktischen Metallographie zur 54. Metallographie Tagung (pp. 51–56). DGM-Inventum GmbH. http://hdl.handle.net/20.500.12708/49591 ( reposiTUm)

Haubner, R., & Strobl, S. (2020). Metallographische Untersuchung eines Kupferflachbeils aus der Kupferzeit. In A. Neidel (Ed.), Sonderbände der Praktischen Metallographie zur 54. Metallographie Tagung (pp. 202–207). http://hdl.handle.net/20.500.12708/49593 ( reposiTUm)

Haubner, R., Strobl, S., & Edtmaier, C. (2020). Ursachenermittlung für die Delamination von Messing/Nickel/Messing Verbundblechen. In A. Neidel (Ed.), Sonderbände der Praktischen Metallographie zur 54. Metallographie Tagung (pp. 171–176). http://hdl.handle.net/20.500.12708/49594 ( reposiTUm)

Haubner, R., Strobl, S., & Linhardt, P. (2019). Effects on microstructure and corrosion behavior of a heat treated CuZn36Pb2 brass. In P. Horňak, M. Longauerova, & M. Matvija (Eds.), Metallography & Fractography, Book of Abstract (p. 87). http://hdl.handle.net/20.500.12708/50464 ( reposiTUm)

Haubner, R., & Strobl, S. (2019). Consideration about the metallurgy of Cu-As Bronzes. In Abstracts - 5th International Conference Archaeometallurgy in Europe 2019 (p. 87). http://hdl.handle.net/20.500.12708/50484 ( reposiTUm)

Haubner, R., Strobl, S., & Trebsche, P. (2019). Analytical investigations on plate slags from the Late Urnfield Period copper mining settlement at Prigglitz-Gasteil. In Abstracts - 5th International Conference Archaeometallurgy in Europe 2019 (p. 125). http://hdl.handle.net/20.500.12708/50485 ( reposiTUm)

Rauchenwald, E., Lessiak, M., Weissenbacher, R., Schwarz, S., & Haubner, R. (2019). Characterisation of chemical vapour deposited AlHfN coatings. In P. Horňak, M. Longauerova, & M. Matvija (Eds.), Metallography & Fractography, Book of Abstract (p. 19). http://hdl.handle.net/20.500.12708/50462 ( reposiTUm)

Strobl, S., & Haubner, R. (2019). Investigation of the diffusion couple ductile cast iron / iron. In P. Horňak, M. Longauerova, & M. Matvija (Eds.), Metallography & Fractography, Book of Abstract (p. 28). http://hdl.handle.net/20.500.12708/50461 ( reposiTUm)

Rauchenwald, E., Lessiak, M., Weissenbacher, R., & Haubner, R. (2019). Characterization of nanostructured hard coatings produced by Chemical Vapor Deposition. In VSS Vienna Young Scientists Symposium - 2019 (pp. 204–205). http://hdl.handle.net/20.500.12708/50480 ( reposiTUm)

Haubner, R., & Strobl, S. (2019). Corrosion phenomena of ancient Roman Iron Coins coated with Bronze. In Conference Proceedings EUROCORR 2019. EUROCORR 2019, Sevilla, Spain. http://hdl.handle.net/20.500.12708/50530 ( reposiTUm)

Haubner, R., & Strobl, S. (2019). The Copper-Arsenic eutecticum and the Cu3As phase. In P. Horňak, M. Longauerova, & M. Matvija (Eds.), Metallography & Fractography, Book of Abstract (p. 17). http://hdl.handle.net/20.500.12708/50459 ( reposiTUm)

Ostermann, M., & Haubner, R. (2019). Production of very fine grained tungsten carbide powders by the WO2(OH)2 transport reaction. In VSS Vienna Young Scientists Symposium - 2019 (pp. 200–201). Book-of-Abstracts.com. http://hdl.handle.net/20.500.12708/50479 ( reposiTUm)

Haubner, R., Böhm, J., Strobl, S., Biezma Moraleda, M. V., & Linhardt, P. (2019). Einfluss von Wärmebehandlungen auf das Gefüge und die Korrosionsbeständigkeit von Mangan-Aluminium-Bronzen. In A. Neidel (Ed.), Sonderbände der Praktischen Metallographie zur 53. Metallographie Tagung (pp. 129–134). INVENTUM GmbH. http://hdl.handle.net/20.500.12708/50532 ( reposiTUm)

Schmid, A., Mori, G., & Haubner, R. (2019). Metallographic documentation of the degradation of iron and nickel based alloys in HCl and H2S containing environments, between 480 - 680 °C. In P. Horňak, M. Longauerova, & M. Matvija (Eds.), Metallography & Fractography, Book of Abstract (p. 18). http://hdl.handle.net/20.500.12708/50463 ( reposiTUm)

Mori, G., Schmid, A., Hönig, S., & Haubner, R. (2019). Corrosion behaviour of Hastelloy C-276 in the reactor atmosphere of a thermal utilization process for post-consumer plastics. In Conference Proceedings EUROCORR 2019. EUROCORR 2019, Sevilla, Spain. http://hdl.handle.net/20.500.12708/50531 ( reposiTUm)

Strobl, S., Haubner, R., & Linhardt, P. (2018). Mikrobiell induzierte Lochkorrosion eines austenitischen Edelstahlrohres. In H. Clemens, S. Mayer, & M. Panzenböck (Eds.), Sonderbände der Praktischen Metallographie 2018 (pp. 279–284). INVENTUM GmbH. http://hdl.handle.net/20.500.12708/50235 ( reposiTUm)

Haubner, R., & Strobl, S. (2018). Lötbruch bei der Warmverformung moderner hochfester unlegierter Stähle (AHSS) mit Feuerverzinkung. In H. Clemens, S. Mayer, & M. Panzenböck (Eds.), Sonderbände der Praktischen Metallographie 2018 (pp. 273–278). INVENTUM GmbH. http://hdl.handle.net/20.500.12708/50232 ( reposiTUm)

Reichert, W., Nießen, J., Kröll, E., Tonnesen, T., Telle, R., Leto, P., & Haubner, R. (2018). In-situ thermo-elastic measurements of high alumina castables during corrosion process. In 61th International Colloquium on Refractories 2018 - REFRACTORIES enabling High Temperature Technologies (pp. 183–186). http://hdl.handle.net/20.500.12708/50441 ( reposiTUm)

Maderthaner, M., Jarosik, A., & Haubner, R. (2018). Charakterisierung von Korngrenzoxiden und intermetallischen Phasen bei verzinkten hochfesten Stählen mittels Brom-Ätzung. In H. Clemens, S. Mayer, & M. Panzenböck (Eds.), Sonderbände der Praktischen Metallographie 2018 (pp. 85–90). INVENTUM GmbH. http://hdl.handle.net/20.500.12708/50233 ( reposiTUm)

Schmid, A., Mori, G., Hönig, S., & Haubner, R. (2018). Corrosion behaviour of Fe and Ni based alloys in the reactor atmosphere of a thermal cracking process. In Conference Proceedings EUROCORR 2018 (p. 15). http://hdl.handle.net/20.500.12708/50231 ( reposiTUm)

Schmid, A., Mori, G., Haubner, R., Strobl, S., & Hönig, S. (2018). Hochtemperaturkorrosion des Stahls X15CrNiSi25-21 (1.4841) in einer Mischgasatmosphäre - Probenpräparation und Schädigungsmechanismus. In H. Clemens, S. Mayer, & M. Panzenböck (Eds.), Sonderbände der Praktischen Metallographie 2018 (pp. 285–290). INVENTUM GmbH. http://hdl.handle.net/20.500.12708/50234 ( reposiTUm)

Greil, S., Edtmaier, C., Haubner, R., & Lauter, L. (2017). Metallographische Untersuchung an Feingold und einer Gold-Kupferlegierung für die Münzherstellung. In G. Petzow (Ed.), Sonderbände der Praktischen Metallographie zur 51. Metallographie Tagung (pp. 155–160). INVENTUM GmbH. http://hdl.handle.net/20.500.12708/49928 ( reposiTUm)

Drechsel, C., Haubner, R., & Konegger, T. (2017). A processing routine for layered Si3N4/SiCN structures with graded multiscalar porosity. In VSS - Vienna Young Scientists Symposium (pp. 84–85). http://hdl.handle.net/20.500.12708/49803 ( reposiTUm)

Prochaska, T., Haubner, R., & Konegger, T. (2017). Porous Si3N4-based support materials with tailored gas permeability. In VSS - Vienna Young Scientists Symposium (pp. 72–73). http://hdl.handle.net/20.500.12708/49804 ( reposiTUm)

Lackner, P., Haubner, R., & Geiderer, P. (2017). Geopolymers and inorganic multibinder systems. In VSS - Vienna Young Scientists Symposium (pp. 44–45). http://hdl.handle.net/20.500.12708/49815 ( reposiTUm)

Strobl, S., Haubner, R., Ball, G., & Linhardt, P. (2017). Lochkorrosion an einem Wasserleitungsrohr der Qualität 1.4301. In G. Petzow (Ed.), Sonderbände der Praktischen Metallographie zur 51. Metallographie Tagung (pp. 111–116). INVENTUM GmbH. http://hdl.handle.net/20.500.12708/48832 ( reposiTUm)

Haubner, R., & Strobl, S. (2017). Untersuchungen an verschiedenen Schlacken der Kupfermetallurgie aus der späten Bronzezeit. In G. Petzow (Ed.), Sonderbände der Praktischen Metallographie zur 51. Metallographie Tagung (pp. 209–214). INVENTUM GmbH. http://hdl.handle.net/20.500.12708/49892 ( reposiTUm)

Drechsel, C., Haubner, R., & Konegger, T. (2017). Porous silicon (carbo)nitride layer structures for separation applications. In International Forum of Young Researchers “Topical Issues of Subsoil Usage” (pp. 44–46). http://hdl.handle.net/20.500.12708/49784 ( reposiTUm)

Maderthaner, M., Jarosik, A., & Haubner, R. (2017). Selective oxidation and hot-dip-galyanizability of advanced high strength steel. In VSS - Vienna Young Scientists Symposium (pp. 88–89). http://hdl.handle.net/20.500.12708/49814 ( reposiTUm)

Schmid, A., Mori, G., Strobl, S., Haubner, R., & Hönig, S. (2017). Corrosion of various Fe and Ni based alloys in HCl, H2S containing environments, with low oxygen partial pressure, at 680 °C. In Conference Proceedings EUROCORR 2017 (p. 10). http://hdl.handle.net/20.500.12708/49889 ( reposiTUm)

Schmid, A., Mori, G., Strobl, S., & Haubner, R. (2017). Ungewöhnliche Rissbildung an einem Autoklaven bei Versuchen zum thermischen Cracken von anthropogenen Ressourcen. In G. Petzow (Ed.), Sonderbände der Praktischen Metallographie zur 51. Metallographie Tagung (pp. 99–104). INVENTUM GmbH. http://hdl.handle.net/20.500.12708/49927 ( reposiTUm)

Haubner, R., Strobl, S., & Trebsche, P. (2016). Analysis of Urnfield period bronze droplets formed during casting. In M. Longauerova & M. Vojtko (Eds.), Abstract Booklet, Metallography´16 (p. 17). http://hdl.handle.net/20.500.12708/49280 ( reposiTUm)

Greil, S., Edtmaier, C., Haubner, R., & Lauter, L. (2016). Metallographic investigations of silver alloys used for mints. In M. Longauerova & M. Vojtko (Eds.), Abstract Booklet, Metallography´16 (p. 25). http://hdl.handle.net/20.500.12708/49267 ( reposiTUm)

Strobl, S., & Haubner, R. (2016). Metallographic investigations of a late medieval pick found at the gold mining site “Goldzeche - kleines Fleißtal”, Austria. In M. Longauerova & M. Vojtko (Eds.), Abstract Booklet, Metallography´16 (p. 60). http://hdl.handle.net/20.500.12708/49281 ( reposiTUm)

Ertl, F., Strobl, S., & Haubner, R. (2016). An ancient bronze ingot smelted from fahlore. In M. Longauerova & M. Vojtko (Eds.), Abstract Booklet, Metallography´16 (p. 140). http://hdl.handle.net/20.500.12708/49282 ( reposiTUm)

Haubner, R., & Strobl, S. (2016). Slag investigations from Bronze Age copper smelting sites. In M. Longauerova & M. Vojtko (Eds.), Abstract Booklet, Metallography´16 (p. 141). http://hdl.handle.net/20.500.12708/49283 ( reposiTUm)

Maderthaner, M., Jarosik, A., Angeli, G., & Haubner, R. (2016). Effect of dew point on the selective oxidation of advanced high strength steels. In M. Longauerova & M. Vojtko (Eds.), Abstract Booklet, Metallography´16 (p. 42). http://hdl.handle.net/20.500.12708/49284 ( reposiTUm)

Haubner, R., Ertl, F., & Strobl, S. (2016). Untersuchungen an einem Bronze Gusskuchen welcher aus Fahlerz gewonnen wurde. In G. Petzow (Ed.), Sonderbände der Praktischen Metallographie zur 50. Metallographie-Tagung (pp. 191–196). INVENTUM GmbH. http://hdl.handle.net/20.500.12708/49375 ( reposiTUm)

Strobl, S., Haubner, R., Partlic, T., & Linhardt, P. (2016). Spannungsrisskorrosion an einem Behälter aus nichtrostendem Stahl, ausgelöst durch die Alterung einer Polyurethanisolierung. In G. Petzow (Ed.), Sonderbände der Praktischen Metallographie zur 50. Metallographie Tagung (pp. 143–148). INVENTUM GmbH. http://hdl.handle.net/20.500.12708/49376 ( reposiTUm)

Strobl, S., Haubner, R., & Scheiblechner, W. (2016). New Steel Combinations Produced By The Damascus Technique. In M. Ciobanu, I.-G. Bucse, & C. Nicolicescu (Eds.), ADEM 2016, Conference Book of Abstracts (pp. 3–4). http://hdl.handle.net/20.500.12708/49423 ( reposiTUm)

Greil, S., Edtmaier, C., & Haubner, R. (2015). Metallography of mint materials. In Vienna Young Scientists Symposium (pp. 128–129). Book-of-Abstracts.com, Gumpoldskirchen. http://hdl.handle.net/20.500.12708/48886 ( reposiTUm)

Haubner, R., & Strobl, S. (2015). Long-time corrosion of a cast bronze droplet during 3000 years storage in soil. In Proceedings EUROCORR 2015 (p. 6). http://hdl.handle.net/20.500.12708/49021 ( reposiTUm)

Ziebell, A., Schöppl, O., Haubner, R., & Konegger, T. (2015). Test rig trials of Si3N4 balls in thrust ball bearings. In Vienna Young Scientists Symposium (pp. 154–155). Book-of-Abstracts.com, Gumpoldskirchen. http://hdl.handle.net/20.500.12708/48890 ( reposiTUm)

Haubner, R., & Strobl, S. (2015). Untersuchungen an einem spätmittelalterlichen Schlägel aus dem Goldbergbau “Goldzeche - kleines Fleißtal.” In G. Petzow (Ed.), Sonderbände der Praktischen Metallographie 47 (pp. 217–222). INVENTUM GmbH. http://hdl.handle.net/20.500.12708/49023 ( reposiTUm)

Strobl, S., Scheiblechner, W., & Haubner, R. (2015). Damaszenerschmieden mit Gusseisen und Stahl. In G. Petzow (Ed.), Sonderbände der Praktischen Metallographie 47 (pp. 127–132). INVENTUM GmbH. http://hdl.handle.net/20.500.12708/49022 ( reposiTUm)

Strobl, S., & Haubner, R. (2014). Damaszenerschmieden - Gefügecharakterisierung von zwei Schmiedestücken mit unterschiedlichen Stahlkombinationen. In F. Mücklich & G. Petzow (Eds.), Sonderbände der Praktischen Metallographie (pp. 131–136). INVENTUM GmbH. http://hdl.handle.net/20.500.12708/48707 ( reposiTUm)

Strobl, S., Linhardt, P., & Haubner, R. (2013). Untersuchungen an einem korrodierten Wellrohrkompensator. In G. Petzow, M. Lohrmann, & M. Rettenmayr (Eds.), Sonderbände der Praktischen Metallographie 45 (pp. 95–100). INVENTUM GmbH. http://hdl.handle.net/20.500.12708/48256 ( reposiTUm)

Strobl, S., Haubner, R., & Pintz, U. (2012). Buntmetallbeschichtungen auf Römischen Eisenmünzen - Subferrata. In G. Petzow, O. Keßler, & M. Rettenmayr (Eds.), Sonderbände der Praktischen Metallographie 44 (pp. 295–300). INVENTUM GmbH. http://hdl.handle.net/20.500.12708/47877 ( reposiTUm)

Haubner, R. (2012). The history of hard CVD coatings for tool applications at the University of Technology Vienna. In Z. Zhongjian (Ed.), 2012 Zhuzhou International Conference on Cemented Carbides (pp. 87–98). http://hdl.handle.net/20.500.12708/47895 ( reposiTUm)

Linhardt, P., Ball, G., Strobl, S., & Haubner, R. (2011). Application of the EPR-Test to 13% Chromium Stainless Steels. In EUROCORR 2011 (p. 8). http://hdl.handle.net/20.500.12708/47617 ( reposiTUm)

Strobl, S., & Haubner, R. (2011). Metallographische Untersuchungen an einem in der Chirurgie eingesetzten Dreistufenbohrer. In G. Petzow (Ed.), Sonderbände der Praktischen Metallographie (pp. 141–146). Werkstoff-Informationsgesellschaft mbH. http://hdl.handle.net/20.500.12708/47616 ( reposiTUm)

Haubner, R., Strobl, S., Adler, M., & Linhardt, P. (2010). Correlation of the microstructure and EPR test results after various heat treatments of a 13 % chromium steel. In M. Longauerova (Ed.), Special Issue, 14th International Symposium on Metallography (pp. 362–367). Acta Metallurgica Slovaca Conference. http://hdl.handle.net/20.500.12708/47061 ( reposiTUm)

Strobl, S., Haubner, R., & Klemm, S. (2010). Metallographic investigations of a historical bloom found in Styria - Austria. In M. Longauerova (Ed.), Special Issue, 14th International Symposium on Metallography (pp. 655–660). Acta Metallurgica Slovaca Conference. http://hdl.handle.net/20.500.12708/47062 ( reposiTUm)

Haubner, R., & Strobl, S. (2010). Oxidation of a Kanthal APM tube initiated by nitrogen diffusion. In M. Longauerova (Ed.), Special Issue, 14th International Symposium on Metallography (pp. 395–398). Acta Metallurgica Slovaca Conference. http://hdl.handle.net/20.500.12708/47063 ( reposiTUm)

Strobl, S., Haubner, R., & Klemm, S. (2010). Microstructure of a nail from the Modern Period found in the context of a historical road in Styria / Austria. In M. Longauerova (Ed.), Special Issue, 14th International Symposium on Metallography (pp. 661–664). Acta Metallurgica Slovaca Conference. http://hdl.handle.net/20.500.12708/47064 ( reposiTUm)

Strobl, S., Haubner, R., & Linhardt, P. (2010). Metallographic- and EPR studies of a 13 % chromium steel after various heat treatments. In G. Petzow, A. Kneissl, & H. Clemens (Eds.), Sonderbände der Praktischen Metallographie 42 (pp. 31–36). Werkstoff-Informationsgesellschaft mbH. http://hdl.handle.net/20.500.12708/47129 ( reposiTUm)

Kütäubel, S., Konegger, T., & Haubner, R. (2010). Optimization of the slip-casting process for the fabrication of polymer-derived ceramic microparts. In Proceedings of the Junior Scientist Conference 2010 (pp. 219–220). Vienna University of Technology. http://hdl.handle.net/20.500.12708/46774 ( reposiTUm)

Haubner, R., & Kalss, W. (2009). Diamond deposition on hardmetal substrates - comparison of substrate pre-treatments. In L. Sigl, P. Rödhammer, & H. Wildner (Eds.), Proceedings of International Conference on High Performance P/M Materials (pp. 1–12). Plansee Group. http://hdl.handle.net/20.500.12708/46665 ( reposiTUm)

Strobl, S., Haubner, R., & Klemm, S. (2009). Metallographische Untersuchungen an historischen Graglach-Eisenproben. In G. Petzow (Ed.), Fortschritte in der Metallographie - Sonderbände der Praktischen Metallographie 40 (pp. 325–330). Werkstoff-Informationsgesellschaft mbH. http://hdl.handle.net/20.500.12708/46667 ( reposiTUm)

Haubner, R., Schwinger, W., Dittert, B., & Schöftner, R. (2009). Selective Growth of Carbon Nanotubes on Printed Fe3O4 Nanoparticles. In ECS Transactions, 25 (pp. 917–920). The Electrochemical Society. http://hdl.handle.net/20.500.12708/46672 ( reposiTUm)

Haubner, R. (2009). Comparison of Diamond Deposition With Boron or Sulfur Addition. In ECS Transactions, 25 (pp. 317–321). The Electrochemical Society. http://hdl.handle.net/20.500.12708/46669 ( reposiTUm)

Traxler, M., & Haubner, R. (2009). Growth of Carbon Nanotube Layers in a Thermal CVD Reactor on Substrates Prepared by Catalyst Spray Deposition. In ECS Transactions, 25 (pp. 861–864). The Electrochemical Society. http://hdl.handle.net/20.500.12708/46670 ( reposiTUm)

Strobl, S., & Haubner, R. (2008). Korrosion eines Kanthal APM Rohres, ausgelöst durch die Eindiffusion von Stickstoff. In G. Petzow, M. Rettenmayr, & A. Kneissl (Eds.), Fortschritte in der Metallographie, Sonderbände der Praktischen Metallographie 40 (pp. 159–164). Werkstoff-Informationsgesellschaft mbH. http://hdl.handle.net/20.500.12708/46149 ( reposiTUm)

Strobl, S., & Haubner, R. (2007). Investigation of “Neumann lines” in powder metallurgical samples and meteorites. In M. Longauerova, I. Hrivnak, S. Longauer, & G. Janak (Eds.), Special Issue, 13th International Symposium on Metallography (pp. 795–801). Acta Metallurgica Slovaca. http://hdl.handle.net/20.500.12708/45859 ( reposiTUm)

Habib, A., Haubner, R., Jakopic, G., & Stelzer, N. (2007). Synthesis of Barium Titanate (BT) Nano Particles via Hydrothermal Route for the Production of BT-Polymer Nanocomposite. In Y. I. Salamin & N. M. Hamdan (Eds.), Nanotechnology and its Applications (pp. 157–161). American Institute of Physics. http://hdl.handle.net/20.500.12708/45860 ( reposiTUm)

Gerger, I., & Haubner, R. (2007). Gradient layers of boron doped diamond on titanium substrates. In J. Robertson, H. Kawarada, E. Kohn, & Z. Sitar (Eds.), DIAMOND 2006 (pp. 899–904). Diamond and Related Materials / ELSEVIER. http://hdl.handle.net/20.500.12708/45679 ( reposiTUm)

Haubner, R. (2006). Diamond Layers - Deposition Methods and Applications. In Proceedings 15th IFHTSE (pp. 322–327). http://hdl.handle.net/20.500.12708/45677 ( reposiTUm)

Gerger, I., & Haubner, R. (2006). The behaviour of Ti-substrates during diamond deposition. In Proceedings 15th IFHTSE (pp. 633–638). http://hdl.handle.net/20.500.12708/45678 ( reposiTUm)

Haubner, R., & Strobl, S. (2006). CASE STUDY ON A DEFECTIVE PLATE HEAT EXCHANGER. In G. Petzow & A. Kneissl (Eds.), Sonderbände der Praktischen Metallographie 38 (pp. 347–354). Werkstoff-Informationsgesellschaft mbH. http://hdl.handle.net/20.500.12708/45488 ( reposiTUm)

Edtmaier, C., & Haubner, R. (2005). Copper based carbon nanotube heat-sinks. In High Performance PM Metals (pp. 277–289). Plansee Holding AG, Reutte. http://hdl.handle.net/20.500.12708/45132 ( reposiTUm)

Weissenbacher, R., & Haubner, R. (2005). Deposition of B,C,N coatings on WC-Co substrates - analytical problems indicating c-BN formation. In Plenary Lectures & PM Hard Materials (pp. 946–958). Plansee Holding AG. http://hdl.handle.net/20.500.12708/45317 ( reposiTUm)

Haubner, R., & Lux, B. (2005). Diamond deposition on steel substrates using intermediate layers. In Plenary Lectures & PM Hard Materials (pp. 959–972). Plansee Holding AG. http://hdl.handle.net/20.500.12708/45318 ( reposiTUm)

Beiträge in Büchern

Haubner, R., & Strobl, S. (2021). Metallurgische Untersuchung eines Doppelspitzschlägels. In S. Karl (Ed.), Das römerzeitliche Marmorsteinbruchrevier Spitzelofen in Kärnten, Montanarchäologische Forschungen (pp. 108–117). Ferdinand Berger & Söhne GmbH. http://hdl.handle.net/20.500.12708/30389 ( reposiTUm)

Haubner, R., Strobl, S., & Trebsche, P. (2019). Metallographic analyses from the late Urnfield period copper mining settlement at Prigglitz-Gasteil in Lower Austria. In R. Turck, T. Stöllner, & G. Goldenberg (Eds.), Alpine Copper II - Alpenkupfer II - Rame delle Alpi II - Cuivre des Alpes II, New Results and Perspectives on Prehistoric Copper Production (pp. 323–332). VML Verlag Marie Leidorf GmbH. http://hdl.handle.net/20.500.12708/30249 ( reposiTUm)

Haubner, R., Strobl, S., & Klemm, S. (2017). Investigations of a slag from copper smelting discovered at the Bronze Age site Prein VII/Cu in Lower Austria. In I. Montero-Ruiz & A. Perea (Eds.), Archaeometallurgy in Europe IV. Bibliotheca Praehistorica Hispana (pp. 135–142). CSIC Publishing. http://hdl.handle.net/20.500.12708/29712 ( reposiTUm)

Haubner, R., Strobl, S., Klemm, S., & Trebsche, P. (2015). Prähistorische Kupfergewinnung im südöstlichen Niederösterreich - archäometallurgische Untersuchungen an alten und neuen Fundstücken. In E. Lauermann & P. Trebsche (Eds.), Beiträge zum Tag der Niederösterreichischen Landesarchäologie 2015 (pp. 26–33). Niederösterreichisches Landesmuseum. http://hdl.handle.net/20.500.12708/28666 ( reposiTUm)

Haubner, R. (2014). The Microstructures of Polycrystalline Diamond, Ballas and Nanocrytalline Diamond. In O. Williams (Ed.), Nanodiamond (pp. 253–267). The Royal Society of Chemistry. http://hdl.handle.net/20.500.12708/28270 ( reposiTUm)

Klemm, S., Strobl, S., & Haubner, R. (2013). Mediaeval Iron Smelting in the Area of the Iron Mountain (Steirischer Erzberg) at Eisenerz, Styria (Austria). In Mining in European History and its Impact on Environment and Human Societies (pp. 103–109). innsbruck university press. http://hdl.handle.net/20.500.12708/28123 ( reposiTUm)

Roy, M., & Haubner, R. (2013). Diamond Film and Their Tribological Performances. In M. Roy (Ed.), Surface Engineering for Enhanced Performance against Wear (pp. 79–110). Springer. https://doi.org/10.1007/978-3-7091-0101-8_3 ( reposiTUm)

Haubner, R., & Strobl, S. (2011). Metallographische Untersuchungen. In S. Klemm (Ed.), Straßen für den Steirischen Erzberg (pp. 206–217). Lit Verlag GmbH & Co. KG Wien. http://hdl.handle.net/20.500.12708/27207 ( reposiTUm)

Haubner, R. (2010). Von der Rosensteingasse in die Chemische Technologie und Werkstoffwissenschaft. In E. Lickl & S. Fischer (Eds.), Festschrift 100 Jahre Rosensteingasse 1910-2010 (pp. 128–133). Fachverlag Wien Dr. Sepp Fischer. http://hdl.handle.net/20.500.12708/27052 ( reposiTUm)

Bücher

Edtmaier, C., Haubner, R., Zeiler, B., & Ortner, H. (Eds.). (2017). Hardmetals-Raw Materials. Technologies and Applications. Elsevier. http://hdl.handle.net/20.500.12708/24285 ( reposiTUm)

Präsentationen

Haubner, R., & Linhardt, P. (2024, April 18). Grüne Technologie am rostigen Seil: Korrosion an schwimmender Photovoltaik im Ozean [Conference Presentation]. 3-Länder-Korrosionstagung 2024, Wien, Austria. ( reposiTUm)

Haubner, R. (2024, February). Wenn die Archäologie auf die Naturwissenschaft trifft und umgekehrt [Conference Presentation]. 1. Fachseminar „Historisches trifft Materialkunde“, Quedlinburg, Germany. https://doi.org/10.34726/5839 ( reposiTUm)

Haubner, R., Strobl, S., & Leskovar, J. (2024, September 18). Untersuchungen an Bronzekleinteilen aus dem hallstattzeitlichen Gräberfeld von Mitterkirchen in Oberösterreich [Poster Presentation]. 58. Metallographietagung 2024, Berlin, Germany. ( reposiTUm)

Haubner, R., & Strobl, S. (2024, February). Metallographische Untersuchungen an archäologischen, metallischen Werkstoffen [Conference Presentation]. 1. Fachseminar „Historisches trifft Materialkunde“, Quedlinburg, Germany. https://doi.org/10.34726/5779 ( reposiTUm)

Cloeren, H.-H., Strobl, S., & Haubner, R. (2024, September 18). Metallographie an Haldenmaterialien aus dem Mansfelder Kupferrevier [Conference Presentation]. 58. Metallographietagung 2024, Berlin, Germany. ( reposiTUm)

Strobl, S., & Haubner, R. (2024, September 18). Gefüge von Eisenmeteoriten [Poster Presentation]. 58. Metallographietagung 2024, Berlin, Germany. ( reposiTUm)

Biezma, M. V., Haubner, R., Strobl, S., Ball, G., & Linhardt, P. (2024, June 25). SELECCIÓN DE TRATAMIENTOS TÉRMICOS PARA LA MEJORA DE LA RESISTENCIA A CORROSIÓN DE BRONCES AL ALUMINIO Y MANGANESO, MAB [Poster Presentation]. XVII Congreso Nacional de Materiales (CNMAT 2024), Málaga, Spain. http://hdl.handle.net/20.500.12708/199160 ( reposiTUm)

Haubner, R., Strobl, S., Ball, G., Linhardt, P., & Biezma, M. V. (2024, September 19). Auswirkungen von Wärmebehandlungen von Mangan-Aluminium-Bronzen auf Gefüge und Korrosionsverhalten [Conference Presentation]. 58. Metallographietagung 2024, Berlin, Germany. http://hdl.handle.net/20.500.12708/201151 ( reposiTUm)

Haubner, R., & Strobl, S. (2023, April 12). Material studies of Roman bronze parts from the archaeological site of Burg, Burgenland [Conference Presentation]. ANAKON 2023, Wien, Austria. ( reposiTUm)

Biezma, M. V., Strobl, S., Linhardt, P., Ball, G., & Haubner, R. (2023, September 15). Entzinkung an alpha-beta Messing bei gegossenen und wärmebehandelten Proben [Conference Presentation]. 57. Metallographietagung 2023, Leoben, Austria. http://hdl.handle.net/20.500.12708/188389 ( reposiTUm)

Strobl, S., Scheiblechner, W., & Haubner, R. (2023, September 13). Metallographische Präparation eines nach der Damaszenertechnik hergestellten Verbundes aus Meteoriteneisen, Stahl, Reineisen und Nickel [Conference Presentation]. 57. Metallographietagung 2023, Leoben, Austria. http://hdl.handle.net/20.500.12708/188384 ( reposiTUm)

Haubner, R., & Strobl, S. (2023, September 14). Untersuchung archäologischer Bronzeteile mittels mikro-Computertomographie und Metallographie [Conference Presentation]. 57. Metallographietagung 2023, Leoben, Austria. http://hdl.handle.net/20.500.12708/188386 ( reposiTUm)

Haubner, R., Strobl, S., Fritzl, M., & Konrad, M. (2023, September 15). Gefügeveränderungen an Bronzeteilen während experimenteller archäologischer Kremierungen [Conference Presentation]. 57. Metallographietagung 2023, Leoben, Austria. http://hdl.handle.net/20.500.12708/188388 ( reposiTUm)

Haubner, R., & Mori, G. (2023, May 12). Hochtemperaturkorrosion beim thermischen Recycling von Kunststoffen in einer ReOil-Anlage [Conference Presentation]. 3-Länder-Korrosionstagung 2023, Frankfurt am Main, Germany. http://hdl.handle.net/20.500.12708/177033 ( reposiTUm)

Haubner, R., & Strobl, S. (2021). Champo del Cielo - ein Eisenmeteorit aus Argentinien. 55. Metallographie-Tagung, Web-Konferenz, Unknown. http://hdl.handle.net/20.500.12708/101618 ( reposiTUm)

Haubner, R., & Strobl, S. (2021). Schlacken der bronzezeitlichen Kupfergewinnung aus Acqua Fredda. 55. Metallographie-Tagung, Web-Konferenz, Unknown. http://hdl.handle.net/20.500.12708/101621 ( reposiTUm)

Strobl, S., & Haubner, R. (2021). Gefügeuntersuchungen an Kupfer-Antimon Legierungen. 55. Metallographie-Tagung, Web-Konferenz, Unknown. http://hdl.handle.net/20.500.12708/101619 ( reposiTUm)

Strobl, S., & Haubner, R. (2021). Porosität in medizinischen Bohrern hervorgerufen durch gebrochene Karbide - eine Nachschau. 55. Metallographie-Tagung, Web-Konferenz, Unknown. http://hdl.handle.net/20.500.12708/101620 ( reposiTUm)

Rauchenwald, E., & Haubner, R. (2021). Nanocrystalline mixtures of AlN and ZrN in CVD grown AlZrN coatings. Online Conference EUROMAT 2021, Graz, Austria. http://hdl.handle.net/20.500.12708/101611 ( reposiTUm)

Nimmervoll, M., Mori, G., Haubner, R., & Hönig, S. (2021). Behavior of High-Temperature Corrosion Resistant Alloys in HCl and H2S Containing Atmospheres. HTCPM 2021 - High Temperature Corrosion and Protection of Materials, Les Embiez Island, France. http://hdl.handle.net/20.500.12708/100590 ( reposiTUm)

Nimmervoll, M., Mori, G., Haubner, R., Hönig, S., & Hofer, W. (2021). Corrosion behaviour of high-temperature alloys during laboratory and field tests in the atmosphere of a pyrolysis reactor for post-consumer plastics. EUROCORR 2021 virtual, virtual DECHEMA, Germany. http://hdl.handle.net/20.500.12708/101612 ( reposiTUm)

Nimmervoll, M., Mori, G., & Haubner, R. (2020). Effect of H2S on high temperature corrosion of corrosion resistant alloys in a thermal cracking reactor for anthropogenic resources. EUROCORR 2020 virtual, virtual by DECHEMA, Unknown. http://hdl.handle.net/20.500.12708/101450 ( reposiTUm)

Haubner, R., Nimmervoll, M., Schmid, A., & Mori, G. (2020). Hochtemperaturkorrosion an Stählen und Nickelbasislegierungen in HCl und H2S haltiger Mischgasatmosphäre. 3-Länder-Korrosionstagung 2020, virtual GfKORR, Unknown. http://hdl.handle.net/20.500.12708/101461 ( reposiTUm)

Rauchenwald, E., Lessiak, M., Weissenbacher, R., & Haubner, R. (2019). Chemical Vapour Deposition of AlZrN coatings by the reaction of in-situ produced ZrCl4 and AlCl3 with NH3. 22. Symposium Verbundwerkstofffe und Werkstoffverbunde, Kaiserslautern, Germany. http://hdl.handle.net/20.500.12708/101144 ( reposiTUm)

Haubner, R., Strobl, S., Bichler, L. P., & Linhardt, P. (2019). Liquid Metal Embrittlement of Copper Brazed Plate Heat Exchangers. 22. Symposium Verbundwerkstofffe und Werkstoffverbunde, Kaiserslautern, Germany. http://hdl.handle.net/20.500.12708/101146 ( reposiTUm)

Strobl, S., Scheiblechner, W., & Haubner, R. (2019). Forging of Copper and Iron Plates by the Damascus Technique. 22. Symposium Verbundwerkstofffe und Werkstoffverbunde, Kaiserslautern, Germany. http://hdl.handle.net/20.500.12708/101145 ( reposiTUm)

Haubner, R., de Oro Calderon, R., & Strobl, S. (2019). Metallographie zur Qualitätssicherung von Sinterstahl und Hartmetall - Teil 2, Hartmetall. 38. Hagener Symposium Pulvermetallurgie - Praktikertag Pulvermetallurgie, Hagen, Germany. http://hdl.handle.net/20.500.12708/101222 ( reposiTUm)

Strobl, S., & Haubner, R. (2019). Carbon diffusion in the ductile cast iron / iron couple produced by Damascus technique. 20. Tagung Festkörperanalytik - 20th Conference on Solid State Analysis, Wien, Austria. http://hdl.handle.net/20.500.12708/101177 ( reposiTUm)

Haubner, R., Zbiral, J., Bleier, A., Hutter, H., Wieland, K., Lendl, B., Sauer, M., & Foelske-Schmitz, A. (2019). Investigation of “milk spots” on silver coins. 20. Tagung Festkörperanalytik - 20th Conference on Solid State Analysis, Wien, Austria. http://hdl.handle.net/20.500.12708/101176 ( reposiTUm)

Edtmaier, C., Haubner, R., Konegger, T., Weil, M., & Stöger, B. (2019). Materials research at the Institute of Chemical Technologies and Analytics - selected topics for 2020. University of Bordeaux, Bordeaux, France. http://hdl.handle.net/20.500.12708/101168 ( reposiTUm)

Rauchenwald, E., Lessiak, M., Weissenbacher, R., Zalesak, J., Keckes, J., Schwarz, S., & Haubner, R. (2019). TEM characterisation of chemical vapour deposited AlHfN and AlZrN coatings. 20th conference on Solid State Analysis / 20. Tagung Festkörperanalytik, Wien, Austria. http://hdl.handle.net/20.500.12708/81076 ( reposiTUm)

Ostermann, M., Wieland, K., Lendl, B., Bernardi, J., & Haubner, R. (2019). Characterization of nano grained WC powders produced by direct carburization of Wo2(OH)2. 20th conference on Solid State Analysis / 20. Tagung Festkörperanalytik, Wien, Austria. http://hdl.handle.net/20.500.12708/81077 ( reposiTUm)

Böhm, J., Haubner, R., Linhardt, P., & Biezma Moraleda, M. V. (2019). Corrosion behaviour of a heat treated manganese-nickel-aluminium bronze (MAB) in simulated fresh and sea water. EUROCORR 2019, Sevilla, Spain. http://hdl.handle.net/20.500.12708/101178 ( reposiTUm)

Haubner, R., & Strobl, S. (2018). Lötbruch bei der Verarbeitung von hochfesten verzinkten Karosserieblechen. 64. Metallkunde-Kolloquium, Lech am Arlberg, Austria. http://hdl.handle.net/20.500.12708/100687 ( reposiTUm)

Edtmaier, C., Konegger, T., Haubner, R., & Weil, M. (2018). Materials research at the Institute of Chemical Technologies and Analytics - current topics for 2018. University of Bordeaux, Bordeaux, France. http://hdl.handle.net/20.500.12708/100817 ( reposiTUm)

Rauchenwald, E., Haubner, R., Lessiak, M., & Weissenbacher, R. (2018). Chemical Vapour Deposition of ZrN using insitu produced ZrCl4 as a precursor. CIMTEC 2018 - 14th International Ceramics Congress, Perugia, Italy. http://hdl.handle.net/20.500.12708/100718 ( reposiTUm)

Haubner, R., Strobl, S., Bichler, L. P., & Linhardt, P. (2018). Electrochemical and metallographic investigations on defective plate heat exchangers. EUROCORR 2018, Krakau, Poland. http://hdl.handle.net/20.500.12708/100745 ( reposiTUm)

Haubner, R., Rauchenwald, E., Lessiak, M., Pitonak, R., & Weissenbacher, R. (2018). Novel high-performance CVD coatings for machining applications. PM AUTO 2018 - 6th international Conference on Powder Metallurgy for Automotive Parts, Isfahan, Iran (Islamic Republic of). http://hdl.handle.net/20.500.12708/100689 ( reposiTUm)

Schmid, A., Mori, G., Hönig, S., & Haubner, R. (2018). Korrosionsverhalten verschiedener Stähle sowie Nickelbasis-legierungen in einem thermischen Crackprozess. 64. Metallkunde-Kolloquium, Lech am Arlberg, Austria. http://hdl.handle.net/20.500.12708/100688 ( reposiTUm)

Haubner, R., Strobl, S., Calderon, R. de O., & Mödlinger, M. (2017). Werkstoffkundliche Untersuchungen an As-Bronzen zum Verständnis der bronzezeitlichen Metallurgie. 63. Metallkunde-Kolloquium, Lech am Arlberg, Austria. http://hdl.handle.net/20.500.12708/100303 ( reposiTUm)

Edtmaier, C., Konegger, T., & Haubner, R. (2017). Materials research at the Institute of Chemical Technologies and Analytics - current topics for 2017. University of Bordeaux, 2017, Bordeaux, France. http://hdl.handle.net/20.500.12708/100278 ( reposiTUm)

Haubner, R. (2017). Low-Pressure diamond deposition and applications. Institut de Chimie de la Matière Condensée de Bordeaux CNRS (ICMCB), Bordeaux, France. http://hdl.handle.net/20.500.12708/100332 ( reposiTUm)

Strobl, S., Haubner, R., & Scheiblechner, W. (2017). Damascus Steel Inlay on a Sword Blade - Production and Characterization. 21. Symposium Verbundwerkstoffe und Werkstoffverbunde, Bremen, Germany. http://hdl.handle.net/20.500.12708/100338 ( reposiTUm)

Haubner, R., & Lessiak, M. (2017). Deposition of CVD Diamond Coatings on Carbon Fiber Composite Substrates. 21. Symposium Verbundwerkstoffe und Werkstoffverbunde, Bremen, Germany. http://hdl.handle.net/20.500.12708/100336 ( reposiTUm)

Haubner, R., & Strobl, S. (2017). Liquid metal embrittlement during hot-forming of advanced high strength steel sheets. EUROCORR 2017, 20th International Corrosion Congress & Process Safety Congress 2017, Prague, Czechia. http://hdl.handle.net/20.500.12708/100355 ( reposiTUm)

Edtmaier, C., Haubner, R., Konegger, T., & Weil, M. (2017). Materials research at the Institute of Chemical Technologies and Analytics - current topics for 2018. University of Bordeaux, 2017, Bordeaux, France. http://hdl.handle.net/20.500.12708/100396 ( reposiTUm)

Haubner, R., Lessiak, M., & Konegger, T. (2017). Improving CVD diamond deposition on carbon fibre composites by a surface treatment with polysilazane. 11th International Conference on New Diamond and Nano Carbons 2017 (NDNC 2017), Cairns, Australia. http://hdl.handle.net/20.500.12708/100320 ( reposiTUm)

Maderthaner, M., Jarosik, A., Angeli, G., & Haubner, R. (2017). 3rd Generation Hot-Dip Galvanized Steel Sheet for Automobile Manufacturing - Interface Reactions between Zinc and Metal Oxide. 21. Symposium Verbundwerkstoffe und Werkstoffverbunde, Bremen, Germany. http://hdl.handle.net/20.500.12708/100337 ( reposiTUm)

Schmid, A., Mori, G., Haubner, R., Strobl, S., & Hönig, S. (2017). Comparison of the high temperature chloride induced corrosion between a Duplex steel and a Ni based alloy. EUROCORR 2017, 20th International Corrosion Congress & Process Safety Congress 2017, Prague, Czechia. http://hdl.handle.net/20.500.12708/100354 ( reposiTUm)

Haubner, R., & Strobl, S. (2016). Bronzezeitliche Metallurgie. 62. Metallkunde-Kolloquium, Lech am Arlberg, Austria. http://hdl.handle.net/20.500.12708/99934 ( reposiTUm)

Haubner, R., & Lessiak, M. (2016). CVD diamond deposition on carbon fibre composites for use as electrodes in electrochemistry. 10th International Conference on New Diamond and Nano Carbons 2016 (NDNC 2016), Xi’an, China. http://hdl.handle.net/20.500.12708/99946 ( reposiTUm)

Haubner, R., & Lessiak, M. (2015). Diamond coatings on carbon based substrates. 20. Symposium Verbundwerkstoffe und Werkstoffverbunde, Wien, Austria. http://hdl.handle.net/20.500.12708/99682 ( reposiTUm)

Strobl, S., & Haubner, R. (2015). Characterisation of steel composites produced by the Damascus technique. 20. Symposium Verbundwerkstoffe und Werkstoffverbunde, Wien, Austria. http://hdl.handle.net/20.500.12708/99683 ( reposiTUm)

Haubner, R., & Strobl, S. (2015). Damaszener Stahl - neuartige Materialvariationen. 61. Metallkunde-Kolloquium, Lech am Arlberg, Austria. http://hdl.handle.net/20.500.12708/99648 ( reposiTUm)

Haubner, R., & Strobl, S. (2015). Analysen an bronzezeitlichen Kupferschlacken zur Beurteilung ihrer Entstehung in metallurgischen Prozessen. 18. Tagung Festkörperanalytik, Wien, Austria. http://hdl.handle.net/20.500.12708/99718 ( reposiTUm)

Unterköfler, S., Lessiak, M., & Haubner, R. (2015). Raman und elektrochemische Messungen an Diamantschichten auf Kohlefaserkomposit (CFC). 18. Tagung Festkörperanalytik, Wien, Austria. http://hdl.handle.net/20.500.12708/99717 ( reposiTUm)

Ziebell, A., Schöppl, O., Haubner, R., & Konegger, T. (2015). Messtechnische Identifizierung von Versagensmechanismen in Prüfstandsversuchen von Hybrid-Wälzlagern. 20. Symposium Verbundwerkstoffe und Werkstoffverbunde, Wien, Austria. http://hdl.handle.net/20.500.12708/99660 ( reposiTUm)

Ziebell, A., Schöppl, O., Haubner, R., & Konegger, T. (2015). Failure prediction in hybrid ball bearings by FFT analysis of vibration data. 3. Mitgliederversammlung der Österreichischen Keramischen Gesellschaft, Wien, Austria. http://hdl.handle.net/20.500.12708/99588 ( reposiTUm)

Haubner, R., Strobl, S., & Trebsche, P. (2015). Analysis of bronze droplets formed during casting at the Urnfield period mining site of Prigglitz-Gasteil in Lower Austria. Archaeometallurgy in Europe IV, Madrid, Spain. http://hdl.handle.net/20.500.12708/99649 ( reposiTUm)

Haubner, R., Strobl, S., & Klemm, S. (2015). Investigations of a slag from copper smelting discovered at the bronze age site Prein VII/Cu in Lower Austria. Archaeometallurgy in Europe IV, Madrid, Spain. http://hdl.handle.net/20.500.12708/99650 ( reposiTUm)

Haubner, R., & Lessiak, M. (2015). CVD Diamond deposition on Carbon Fiber Composites. EuroCVD 20, Sempach, Switzerland. http://hdl.handle.net/20.500.12708/99681 ( reposiTUm)

Lessiak, M., Haubner, R., Pitonak, R., Köpf, A., & Weissenbacher, R. (2015). Gaseous ternary chromium-aluminium complexes as precursor for chemical vapour deposition. EuroCVD 20, Sempach, Switzerland. http://hdl.handle.net/20.500.12708/99680 ( reposiTUm)

Haubner, R., Strobl, S., & Klemm, S. (2014). REM-, EDX-, RFA- Untersuchungen am Anschliff einer Kupferverhüttungsschlacke aus Prein in Niederösterreich. Workshop Prähistorische Kupferverhüttungsschlacken im Alpenraum, Zürich, Schweiz, Non-EU. http://hdl.handle.net/20.500.12708/99515 ( reposiTUm)

Haubner, R. (2014). CVD-Abscheidung von harten und superharten Schichten. 8. Forschungs‐ & Technologieforum Mostviertel, Amstetten, Austria. http://hdl.handle.net/20.500.12708/99441 ( reposiTUm)

Haubner, R., & Strobl, S. (2014). Eisen - ein metallographischer Ausflug durch die Welt der Eisenlegierungsgefüge. 60. Metallkunde-Jubiläumskolloquium, Lech am Arlberg, Austria. http://hdl.handle.net/20.500.12708/99354 ( reposiTUm)

Edtmaier, C., & Haubner, R. (2014). Research on the Institute of Chemical Technologies and Analytics and possibilities for Erasmus internships. University of Bordeaux, 2014, Bordeaux, France. http://hdl.handle.net/20.500.12708/99514 ( reposiTUm)

Haubner, R., & Lessiak, M. (2014). CVD-diamond deposition on carbon based substrates for electrochemical applications. 25th International Conference on Diamond and Carbon Materials 2014, Madrid, Spain. http://hdl.handle.net/20.500.12708/99513 ( reposiTUm)

Strobl, S., & Haubner, R. (2013). Microstructural features of bronze-coated iron coins from the Roman Empire. Metallography 2013, Stara Lesna, Slovak Republic, EU. http://hdl.handle.net/20.500.12708/99154 ( reposiTUm)

Haubner, R., Strobl, S., Linhardt, P., & Halwax, E. (2013). Investigations on a defect sewer pipe, attacked by microbiologically produced acid. Metallography 2013, Stara Lesna, Slovak Republic, EU. http://hdl.handle.net/20.500.12708/99155 ( reposiTUm)

Haubner, R., Schatz, I., Schatz, F., Scheiblechner, W., Schubert, W.-D., & Strobl, S. (2013). Archaeometallurgical simulations of the processes in bloomery furnaces from the Hallstatt and medieval period. Metallography 2013, Stara Lesna, Slovak Republic, EU. http://hdl.handle.net/20.500.12708/99157 ( reposiTUm)

Meyer, M., Strobl, S., & Haubner, R. (2013). Microstructural investigations on Vespa scooter gear parts over a production period of 50 years. Metallography 2013, Stara Lesna, Slovak Republic, EU. http://hdl.handle.net/20.500.12708/99156 ( reposiTUm)

Haubner, R., & Strobl, S. (2013). Slag investigation from iron smelting and iron processing sites in Austria - from Hallstatt and medieval period and the 19th century. Metallography 2013, Stara Lesna, Slovak Republic, EU. http://hdl.handle.net/20.500.12708/99153 ( reposiTUm)

Haubner, R. (2013). c-BN - The slowly but steady evolution from the high-pressure high-temperature technology to coatings. 1st International Midsummer-Workshop on c-BN-based Metastable Coatings, Nanolaminates and Nanocomposites, Uppsala, Sweden, EU. http://hdl.handle.net/20.500.12708/99055 ( reposiTUm)

Lessiak, M., & Haubner, R. (2013). Diamond coatings on hardmetal substrates with CVD coatings as intermediate layers. EuroCVD 19, Varna, Bulgarien, Non-EU. http://hdl.handle.net/20.500.12708/97887 ( reposiTUm)

Haubner, R., & Rudigier, M. (2013). Raman characterisation of diamond coatings using different laser wavelengths. EuroCVD 19, Varna, Bulgarien, Non-EU. http://hdl.handle.net/20.500.12708/97886 ( reposiTUm)

Haubner, R. (2013). 30 years low-pressure diamond deposition at Vienna University of Technology. Bakul Institute for Superhard Materials of the National Academy of Sciences of Ukraine, Kiev, Ukraine, Non-EU. http://hdl.handle.net/20.500.12708/99092 ( reposiTUm)

Haubner, R. (2012). Diamantschichten. Seminar zur Dünnschicht-Technologie an der Universität Duisburg-Essen, Duisburg, EU. http://hdl.handle.net/20.500.12708/98833 ( reposiTUm)

Haubner, R. (2012). Deposition and Characterisation of Diamond Coatings. 2nd Austrian Symposium on Carbon Based Coatings, Leoben, Austria. http://hdl.handle.net/20.500.12708/98835 ( reposiTUm)

Haubner, R., Strobl, S., Ritter, V., & Pintz, U. (2012). Römische Eisenmünzen - Subferrata - mit Buntmetallbeschichtungen. 58. Metallkunde-Kolloquium, Lech am Arlberg, Austria. http://hdl.handle.net/20.500.12708/98834 ( reposiTUm)

Haubner, R., & Rudigier, M. (2012). Raman spectroscopy on various diamond morphologies using three different laser wavelength. International Conference on Diamond and Carbon Materials, Granada, Spanien, EU. http://hdl.handle.net/20.500.12708/98870 ( reposiTUm)

Lessiak, M., & Haubner, R. (2012). CVD-diamond deposition on alkaline-earth fluorides to be used as “Waveguide Sensors” in Mid-IR absorption spectroscopy. International Conference on Diamond and Carbon Materials, Granada, Spanien, EU. http://hdl.handle.net/20.500.12708/98871 ( reposiTUm)

Klemm, S., Strobl, S., & Haubner, R. (2012). Mediaeval Iron Smelting in the Area of the Iron Mountain (Steirischer Erzberg) at Eisenerz, Styria (Austria). 2nd Mining in European History-Conference, Innsbruck, Austria. http://hdl.handle.net/20.500.12708/98872 ( reposiTUm)

Haubner, R., Gruber, S., & Sachdev, H. (2011). Nanocrystalline Fe-, Co-, Ni-oxalate powders as catalyst for the growth of Carbon Nanotubes. 22nd European Conference on Diamond, Diamond-Like Materials, Carbon Nanotubes, and Nitrides, Garmisch-Partenkirchen, EU. http://hdl.handle.net/20.500.12708/98637 ( reposiTUm)

Haubner, R., Strobl, S., Doppler, P., Zbiral, J., Gusenbauer, C., & Pintz, U. (2011). Werkstoffkundliche Untersuchungen an römischen Eisenmünzen - Subferraten. 16. Tagung Festkörperanalytik, Wien, Austria. http://hdl.handle.net/20.500.12708/98639 ( reposiTUm)

Linhardt, P., Strobl, S., Halwax, E., Koschatzky, K., & Haubner, R. (2011). Untersuchungen an einem gusseisernen Kanalrohr, welches durch mikrobiell entstandene Schwefelsäure angegriffen wurde. 16. Tagung Festkörperanalytik, Wien, Austria. http://hdl.handle.net/20.500.12708/98638 ( reposiTUm)

Konegger, T., Kütäubel, S., & Haubner, R. (2011). Herstellung mikrostrukturierter keramischer Bauteile auf Polysilazan-Basis über die Soft-Lithography-Technik. DKG-Jahrestagung 2011, Saarbrücken, EU. http://hdl.handle.net/20.500.12708/98483 ( reposiTUm)

Haubner, R., Fuchs, J., Strobl, S., & Henkel, A.-M. (2011). Untersuchungen an Bohrern aus der Medizin. 57. Metallkunde-Kolloquium, Lech am Arlberg, Austria. http://hdl.handle.net/20.500.12708/98498 ( reposiTUm)

Rudigier, M., Haubner, R., & Gollas, B. (2011). AFM tips for scanning electrochemical microscopy (SECM) coated with nanocrystalline boron doped diamond. 22nd European Conference on Diamond, Diamond-Like Materials, Carbon Nanotubes, and Nitrides, Garmisch-Partenkirchen, EU. http://hdl.handle.net/20.500.12708/98635 ( reposiTUm)

Haubner, R., & Rudigier, M. (2011). Raman spectroscopy with different laser wavelengths on various morphologies of diamond and boron-doped diamond. 22nd European Conference on Diamond, Diamond-Like Materials, Carbon Nanotubes, and Nitrides, Garmisch-Partenkirchen, EU. http://hdl.handle.net/20.500.12708/98636 ( reposiTUm)

Rudigier, M., & Haubner, R. (2011). Raman Messungen an Diamantschichten mit unterschiedlichen Laser Anregungs-Wellenlängen. 16. Tagung Festkörperanalytik, Wien, Austria. http://hdl.handle.net/20.500.12708/98640 ( reposiTUm)

Linhardt, P., Adler, M., Strobl, S., & Haubner, R. (2010). Application of the EPR-Test to 13% chromium steel and the role of sulphide inclusions. 15#^{th} Nordic Corrosion Congress, Stockholm, EU. http://hdl.handle.net/20.500.12708/98383 ( reposiTUm)

Haubner, R. (2010). Low-pressure synthesis of diamond - review. 1st Austrian Symposium on Carbon Based Coatings, Leoben, Österreich, Austria. http://hdl.handle.net/20.500.12708/98391 ( reposiTUm)

Haubner, R. (2010). Elementarer Kohlenstoff - das sechste Element im Periodensystem. Woche der freien Bildung, Wien, Austria. http://hdl.handle.net/20.500.12708/98408 ( reposiTUm)

Traxler, M., & Haubner, R. (2010). Carbon Nanotube layers grown from different carbon sources in a thermal CVD reactor. 21th European Conference on Diamond, Diamond-Like Materials, Carbon Nanotubes, and Nitrides, Budapest, Hungary, EU. http://hdl.handle.net/20.500.12708/98410 ( reposiTUm)

Dittert, B., Bergmair, I., Schöftner, R., Hesser, G., & Haubner, R. (2009). Micro fluid contact printing (μFCP) of sol-gel derived CNT growing catalysts. 35th International Conference on Micro&Nano Engineering 2009, Ghent, Belgium, EU. http://hdl.handle.net/20.500.12708/98165 ( reposiTUm)

Haubner, R., Strobl, S., & Klemm, S. (2009). Graglach - Mikrostrukturen eines seltenen Massenprodukts. 55. Metallkunde-Kolloquium, Lech am Arlberg, Austria. http://hdl.handle.net/20.500.12708/98160 ( reposiTUm)

Linhardt, P., Ball, G., Strobl, S., & Haubner, R. (2009). Application of the EPR-Test to 13% chromium steel for non destructive quality assessment. 5. Kurt Schwabe Symposium, Erlangen, EU. http://hdl.handle.net/20.500.12708/98155 ( reposiTUm)

Haubner, R., Dittert, B., & Schöftner, R. (2009). Sol-gel preparation of catalyst dots for selective growth of carbon nanotubes. 20th European Conference on Diamond, Diamond-Like Materials, Carbon Nanotubes, and Nitrides, Athens, Greece, EU. http://hdl.handle.net/20.500.12708/98162 ( reposiTUm)

Lessiak, M., & Haubner, R. (2009). Diamond coatings on hardmetal substrates with CVD coatings as intermediate layers. EuroCVD 19, Varna, Bulgarien, Non-EU. http://hdl.handle.net/20.500.12708/97885 ( reposiTUm)

Haubner, R., Schwinger, W., Bodnarchuk, M., Kovalenko, M., & Heiss, W. (2008). Selective growth of carbon nanotubes in a hot-filament CVD equipment on printed Fe3O4 nanoparticles. 19th European Conference on Diamond, Diamond-Like Materials, Carbon Nanotubes, and Nitrides, Sitges, Spain, EU. http://hdl.handle.net/20.500.12708/98164 ( reposiTUm)

Haubner, R., Liersch, A., & Ruess, G. (2008). Herstellung und Verarbeitung von NiO-ZrO₂-Y₂O₃ Nano-Pulvern mittels Hydrothermalsynthese für den Einsatz als Anodenmaterial in Hochtemperaturbrennstoffzellen. 54. Metallkunde-Kolloquium, Lech am Arlberg, Austria. http://hdl.handle.net/20.500.12708/97751 ( reposiTUm)

Habib, A., Stelzer, N., & Haubner, R. (2008). Fabrication of BaTiO3-PMMA Polymer Nanocomposite Thin / Thick Films and their Dielectric Properties. E-MRS Fall Meeting 2008, Warschau / Polen, EU. http://hdl.handle.net/20.500.12708/97898 ( reposiTUm)

Schwinger, W., Bergmaier, I., Mühlberger, M., Bodnarchuk, M., Kovalenko, M., Haubner, R., Lausecker, E., Heiss, W., & Schöftner, R. (2008). Structured deposition of catalytic nanoparticles and growth of carbon nanotubes. 34th International Conference on Micro&Nano Engineering 2008, Athen, EU. http://hdl.handle.net/20.500.12708/97899 ( reposiTUm)

Schwinger, W., Bergmaier, I., Mühlberger, M., Bodnarchuk, M., Kovalenko, M., Haubner, R., Lausecker, E., Heiss, W., & Schöftner, R. (2008). Printing of Catalytic Nano-Particles for CNT-Growth. The 7th International Conference on Nanoimprint and Nanoprint Technology (NNT’08), Kyoto, Japan, Non-EU. http://hdl.handle.net/20.500.12708/97900 ( reposiTUm)

Traxler, M., & Haubner, R. (2008). Catalyst spray deposition for Carbon Nanotube growth in a thermal CVD reactor. 19th European Conference on Diamond, Diamond-Like Materials, Carbon Nanotubes, and Nitrides, Sitges, Spain, EU. http://hdl.handle.net/20.500.12708/98163 ( reposiTUm)

Haubner, R. (2007). Carbon Nanotubes - structures, synthesis methods and suggested applications. NSI Meeting - M24, Hotel Schloss Mühldorf - Feldkirchen/Donau, Austria. http://hdl.handle.net/20.500.12708/97672 ( reposiTUm)

Haubner, R., & Ullram, S. (2007). Influence of H2S addition during diamond deposition on hardmetal substrates. 18th European Conference on Diamond, Diamond-Like Materials, Carbon Nanotubes, and Nitrides, Berlin, Germany, EU. http://hdl.handle.net/20.500.12708/97674 ( reposiTUm)

Haubner, R., Schwinger, W., Haring, J., & Schöftner, R. (2007). Sol-gel preparation of catalyst particles on substrates for hot-filament CVD nanotube deposition. 18th European Conference on Diamond, Diamond-Like Materials, Carbon Nanotubes, and Nitrides, Berlin, Germany, EU. http://hdl.handle.net/20.500.12708/97677 ( reposiTUm)

Schwinger, W., Haring, J., Jantscher, A., Haubner, R., Gerger, I., Kovalenko, M., Heiss, W., & Schöftner, R. (2007). Preparation of catalytic nano-particles and growth of aligned CNTs with HF-CVD. Internationale Conference on Nano Science and Technology (ICN+T 2007), Stockholm, Sweden, EU. http://hdl.handle.net/20.500.12708/97681 ( reposiTUm)

Habib, A., Haubner, R., & Stelzer, N. (2007). Effect of Temperature, Time and Particle Size of Ti- Precursor on Hydrothermal Synthesis of Barium Titante. 4th International Workshop on “Nanosciences & Nanotechnologies” (NN07), Thessaloniki, Greece, EU. http://hdl.handle.net/20.500.12708/97567 ( reposiTUm)

Haubner, R., & Strobl, S. (2007). Natürliche Eisen-Legierungen - Meteoriten. 53. Metallkunde-Kolloquium, Lech am Arlberg, Austria. http://hdl.handle.net/20.500.12708/97566 ( reposiTUm)

Haubner, R. (2006). Herstellung, Eigenschaften und Anwendungen von nanokristallinen Kohlenstoffphasen. Nano@Surface XXIII. Internationales H.F.Mark - Symposium, Wels, Österreich, Austria. http://hdl.handle.net/20.500.12708/97411 ( reposiTUm)

Habib, A., Stelzer, N., & Haubner, R. (2006). Hydrothermal Synthesis of Barium Titanate Temperature, Time and Particle Size of Ti-precursor Dependence. Nano and Photonics Mauterndorf 2006, Mauterndorf, Austria. http://hdl.handle.net/20.500.12708/97262 ( reposiTUm)

Ruess, G., Liersch, A., & Haubner, R. (2006). Herstellung von oxidischen Nanopulvern mittels Hydrothermalsynthese am Beispiel von 8 mol Y2O3 stabilisiertem ZrO2. 52. Metallkunde-Kolloquium, Lech am Arlberg, Austria. http://hdl.handle.net/20.500.12708/97264 ( reposiTUm)

Haubner, R., & Strobl, S. (2006). Korrosion an einem gelöteten Platten-Wärmetauscher. 52. Metallkunde-Kolloquium, Lech am Arlberg, Austria. http://hdl.handle.net/20.500.12708/97263 ( reposiTUm)

Haubner, R. (2005). Low-Pressure Diamond Deposition: preparation, applications and characterization. ESF/PESC Exploratory Workshop: Novel Superhard Materials, Bayreuth, Germany, Austria. http://hdl.handle.net/20.500.12708/96948 ( reposiTUm)

Ullram, S., & Haubner, R. (2005). Temperature pre-treatments of hardmetal substrates to reduce the cobalt content and improve diamond deposition. 16th European Conference on Diamond, Diamond-Like Materials, Carbon Nanotubes, Nitrides & Silicon Carbide, Toulouse, France, Austria. http://hdl.handle.net/20.500.12708/96947 ( reposiTUm)

Gerger, I., & Haubner, R. (2005). Electrochemical decomposition of chlorinated hydrocarbons on boron doped diamond titanium electrodes. 16th European Conference on Diamond, Diamond-Like Materials, Carbon Nanotubes, Nitrides & Silicon Carbide, Toulouse, France, Austria. http://hdl.handle.net/20.500.12708/96946 ( reposiTUm)

Haubner, R., & Gerger, I. (2005). Diamantabscheidung auf Titan für elektrochemische Anwendungen. 51. Metallkunde Kolloquium, Lech am Arlberg, Austria. http://hdl.handle.net/20.500.12708/96817 ( reposiTUm)

Gerger, I., & Haubner, R. (2004). Cyclic voltammetry measurements on boron and nitrogen doped diamond layers. 15th European Conference on Diamond, Diamond-Like Materials, Carbon Nanotubes, Nitrides & Silicon Carbide, Riva Del Garda, Trentino, Italy, Austria. http://hdl.handle.net/20.500.12708/96597 ( reposiTUm)

Haubner, R. (2004). Kohlenstoff und seine Modifikationen. AG - Tagung CHEMIE (A40502), Wien, Austria. http://hdl.handle.net/20.500.12708/96595 ( reposiTUm)

Haubner, R. (2004). CVD-Diamant – Technologie und Analytik. Seminar „Moderne Analytische Chemie“, Wien, Austria. http://hdl.handle.net/20.500.12708/96618 ( reposiTUm)

Haubner, R. (2004). Comparison of sulfur, boron, nitrogen and phosphorus additions during low-pressure diamond deposition. 15th European Conference on Diamond, Diamond-Like Materials, Carbon Nanotubes, Nitrides & Silicon Carbide, Riva Del Garda, Trentino, Italy, Austria. http://hdl.handle.net/20.500.12708/96596 ( reposiTUm)

Haubner, R., & Edtmaier, C. (2004). Carbon-Nanotubes – Herstellung und Weiterverarbeitung zu MMCs. 50. Metallkunde-Kolloquium, Lech am Arlberg, Austria. http://hdl.handle.net/20.500.12708/96508 ( reposiTUm)

Haubner, R., & Edtmaier, C. (2003). Elementarer Kohlenstoff - ein Chameleon. 49. Metallkunde-Kolloqium der Universität Leoben, Lech am Arlberg, Austria. http://hdl.handle.net/20.500.12708/96171 ( reposiTUm)

Gerger, I., Haubner, R., Besenhard, J., Nauer, G., Kronberger, H., & Fafilek, G. (2003). Investigation of diamond coatings on titanium substrates for electrochemical applications. Forum ECHEM, Vienna, Austria, Austria. http://hdl.handle.net/20.500.12708/96181 ( reposiTUm)

Gerger, I., Haubner, R., Kronberger, H., & Fafilek, G. (2003). Investigation of diamond coatings on titanium substrates for electrochemical applications. 14th European Conference on Diamond, Diamond-Like Materials, Carbon Nanotubes, Nitrides & Silicon Carbide, Salzburg, Austria, Austria. http://hdl.handle.net/20.500.12708/96183 ( reposiTUm)

Haubner, R., Besenhard, J., Kronberger, H., & Fafilek, G. (2003). Investigation of diamond coatings on titanum substrates for electrochemical applications. Forum ECHEM, Vienna, Austria, Austria. http://hdl.handle.net/20.500.12708/96263 ( reposiTUm)

Haubner, R. (2003). Diamond deposition with sulphur addition - thermodynamic calculations. 14th European Conference on Diamond, Diamond-Like Materials, Carbon Nanotubes, Nitrides & Silicon Carbide, Salzburg, Austria, Austria. http://hdl.handle.net/20.500.12708/96222 ( reposiTUm)

Haubner, R. (2003). Zersetzung von B-C-N-H Verbindungen zur Abscheidung von B-C-N Schichten. 10. c-BN Expertentreffen, Mittweida, Deutschland, Austria. http://hdl.handle.net/20.500.12708/96223 ( reposiTUm)

Gerger, I., & Haubner, R. (2003). CVD Diamant für Elektroden. ECHEM Workshop 2003, Wr. Neustadt, Austria, Austria. http://hdl.handle.net/20.500.12708/96224 ( reposiTUm)

Neumayer, H., & Haubner, R. (2003). Formation of carbon-nano-fibres and carbon-nanotubes with a vertical flow-reactor. 14th European Conference on Diamond, Diamond-Like Materials, Carbon Nanotubes, Nitrides & Silicon Carbide, Salzburg, Austria, Austria. http://hdl.handle.net/20.500.12708/96182 ( reposiTUm)

Haubner, R. (2002). Zersetzung von Triethylborazine zur Abscheidung von B-C-N Schichten und Nano-fibres. 9. c-BN Expertentreffen, Bonn, Deutschland, Austria. http://hdl.handle.net/20.500.12708/95818 ( reposiTUm)

Lux, B., Bartl, A., Haubner, R., Kalss, W., Sachdev, H., & Tang, X. (1997). Synthesis of cubic BN without high pressure? IUMRS-ICA-97 Symposium I,Super Carbon, Tokio, Non-EU. http://hdl.handle.net/20.500.12708/97754 ( reposiTUm)

Spezialbeiträge

Haubner, R. (2024). Doomsday: unausweichlich? Green Care, 11(3), 21–24. https://doi.org/10.34726/7080 ( reposiTUm)

Haubner, R. (2024). Universalregeln: Naturgesetze? Green Care, 11(2), 32–34. https://doi.org/10.34726/7081 ( reposiTUm)

Haubner, R. (2023, November). Kritische Betrachtungen zur Zusammenarbeit von Archäologen und Naturwissenschaftlern. Archäologische Denkmalpflege, Kleine Schriften 3. https://doi.org/10.34726/5442 ( reposiTUm)

Haubner, R. (2022, November 30). Interview with guest editor Prof. Roland Haubner [Interview]. Walter de Gruyter GmbH. https://doi.org/10.1515/pm-2022-0073 ( reposiTUm)