Zhang, G., Zheng, Y., Fürst, M., Lengauer, W., Zhang, J., Ke, Z., Xu, X., & Wu, H. (2020). On the use of TiO₂ in Ti(C,N)-WC/Mo₂C-(Ta,Nb)C-Co/Ni cermets. International Journal of Refractory Metals and Hard Materials, 91(105274), 105274. https://doi.org/10.1016/j.ijrmhm.2020.105274 ( reposiTUm)

Schwarz, V., Scagnetto, F., & Lengauer, W. (2019). Sintering of Ti(C,N)-WC/Mo₂C-(Ta,Nb)C-Co/Ni cermets investigated by CO and N₂ outgassing. Metals, 9(4), Article 427. https://doi.org/10.3390/met9040427 ( reposiTUm)

Peng, Z., Du, Y., & Lengauer, W. (2019). Morphology of η phase in cemented carbides with Fe-based binders. Ceramics International, 45, 20774–20779. http://hdl.handle.net/20.500.12708/143231 ( reposiTUm)

Lengauer, W., Duretek, I., Fürst, M., Schwarz, V., Gonzalez-Gutierrez, J., Schuschnigg, S., Kukla, C., Kitzmantel, M., Neubauer, E., Lieberwirth, C., & Morrison, V. (2019). Fabrication and properties of extrusion-based 3D-printed hardmetal and cermet components. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 82, 141–149. https://doi.org/10.1016/j.ijrmhm.2019.04.011 ( reposiTUm)

Hochenauer, R., & Lengauer, W. (2019). Characterisation and performance optimisation of WC-MC/M(C,N)-Co hardmetals. Metals, 9(4), Article 435. https://doi.org/10.3390/met9040435 ( reposiTUm)

Lengauer, W., & Bohn, M. (2018). Thermochemical Basis of the Preparation of Well-Defined Transition Metal Carbide, Nitride and Carbonitride Reference Materials for Electron-Probe Microanalysis (EPMA). Solid State Phenomena, 274, 20–42. https://doi.org/10.4028/www.scientific.net/ssp.274.20 ( reposiTUm)

Lengauer, W., & Scagnetto, F. (2018). Ti(C,N)-Based Cermets: Critical Review of Achievements and Recent Developments. Solid State Phenomena, 274, 53–100. https://doi.org/10.4028/www.scientific.net/ssp.274.53 ( reposiTUm)

Findenig, G., Buchegger, C., Lengauer, W., Veitsch, C., & Demoly, A. (2017). Investigation of the main influencing parameters on the degassing behaviour of titanium carbonitrides using mass spectrometry. International Journal of Refractory Metals and Hard Materials, 63, 38–46. https://doi.org/10.1016/j.ijrmhm.2016.07.019 ( reposiTUm)

Peng, Y., Buchegger, C., Lengauer, W., Du, Y., & Zhou, P. (2016). Solubilities of grain-growth inhibitors in WC-Co based cemented carbides: Thermodynamic calculations compared to experimental data. International Journal of Refractory Metals and Hard Materials, 61, 121–127. https://doi.org/10.1016/j.ijrmhm.2016.08.012 ( reposiTUm)

Lauter, L., Hochenauer, R., Buchegger, C., Bohn, M., & Lengauer, W. (2016). Solid-state solubilities of grain-growth inhibitors in WC-Co and WC-MC-Co hardmetals. Journal of Alloys and Compounds, 675, 407–415. https://doi.org/10.1016/j.jallcom.2016.03.117 ( reposiTUm)

Konyashin, I., & Lengauer, W. (2016). Sintering mechanisms of functionally graded cemented carbides. Materials Science Forum, 835, 116–198. https://doi.org/10.4028/www.scientific.net/msf.835.116 ( reposiTUm)

Zhou, P., Peng, Y., Buchegger, C., Du, Y., & Lengauer, W. (2016). Experimental investigation and thermodynamic assessment of the C-Co-Fe-Ni-W. International Journal of Refractory Metals and Hard Materials, 54, 60–69. https://doi.org/10.1016/j.ijrmhm.2015.07.021 ( reposiTUm)

Buchegger, C., Lengauer, W., Bernardi, J., Gruber, J., Ntaflos, T., Kiraly, F., & Langlade, J. (2015). Diffusion parameters of grain-growth inhibitors in WC based hardmetals with Co, Fe/Ni and Fe/Co/Ni binder alloys. International Journal of Refractory Metals and Hard Materials, 49, 67–74. https://doi.org/10.1016/j.ijrmhm.2014.06.002 ( reposiTUm)

Wawrzik, S., Zhou, P., Buchegger, C., & Lengauer, W. (2015). Metallurgy and thermochemistry of cermet/hardmetal laminates. International Journal of Refractory Metals and Hard Materials, 50, 282–289. http://hdl.handle.net/20.500.12708/151848 ( reposiTUm)

Mathe, B. A., Comins, J. D., Every, A. G., & Lengauer, W. (2014). Thermal dependence of elastic properties of polycrystalline TiC0.97 and TiC0.40N0.60 alloys studied by surface Brillouin scattering. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 45(45), 212–217. http://hdl.handle.net/20.500.12708/157956 ( reposiTUm)

Janisch, D. S., Lengauer, W., Eder, A., Dreyer, K., Rödiger, K., Daub, H.-W., Kassel, D., & van den Berg, H. (2013). Nitridation sintering of WC-Ti(C,N)-(Ta,Nb)C-Co hardmetals. International Journal of Refractory Metals and Hard Materials, 36, 22–30. https://doi.org/10.1016/j.ijrmhm.2011.12.013 ( reposiTUm)

Glühmann, J., Schneeweiß, M., van den Berg, H., Kassel, D., Rödiger, K., Dreyer, K., & Lengauer, W. (2013). Functionally grades WC-Ti(C,N)-(Ta,Nb)C-Co hardmetals: Metallurgy and Performance. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 36, 38–45. https://doi.org/10.1016/j.ijrmhm.2011.12.009 ( reposiTUm)

Brieseck, M., Hünsche, I., Caspers, B., Gille, G., Bohn, M., & Lengauer, W. (2012). Diffusion Behaviour of the Grain-Growth Inhibitor VC in Hardmetals. Defect and Diffusion Forum, 323–325, 509–514. http://hdl.handle.net/20.500.12708/164844 ( reposiTUm)

Demoly, A., Veitsch, C., Lengauer, W., & Rabitsch, K. (2012). Microstructural development during sintering and mechanical properties. Sintering Science and Technology IT, CERAMIC TRANSACTION VOL. 232,(ISBN: 978-1-118-27375-3), 57–69. http://hdl.handle.net/20.500.12708/164978 ( reposiTUm)

Dopita, M., Rafaja, D., Chmelik, D., Salomon, A., Janisch, D. S., & Lengauer, W. (2011). Microstructural investigation of hard metals by combination of EBSD and XRD. Materials Structure, 18(3), 169–177. http://hdl.handle.net/20.500.12708/165186 ( reposiTUm)

Demoly, A., Lengauer, W., Veitsch, C., & Rabitsch, K. (2011). Effect of submicron Ti(C,N) on the microstructure and the mechanical properties of Ti(C,N)-based cermets. International Journal of Refractory Metals and Hard Materials, 29(6), 716–723. https://doi.org/10.1016/j.ijrmhm.2011.05.007 ( reposiTUm)

Reichel, B., Wagner, K., Janisch, D. S., & Lengauer, W. (2010). Alloyed W-(Co,Ni,Fe)-C phases for reaction sintering of hardmetals. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 28(5), 638–645. https://doi.org/10.1016/j.ijrmhm.2010.06.003 ( reposiTUm)

Brieseck, M., Lengauer, W., Gneiß, B., Wagner, K., & Wagner, S. (2010). A straightforward method for analysing the grain-size distribution in tungsten carbide - cobalt hardmetals. Microchimica Acta, 168(3–4), 309–316. https://doi.org/10.1007/s00604-010-0294-4 ( reposiTUm)

Brieseck, M., Bohn, M., & Lengauer, W. (2010). Diffusion and solubility of Cr in WC. Journal of Alloys and Compounds, 489(2), 408–414. https://doi.org/10.1016/j.jallcom.2009.09.137 ( reposiTUm)

Janisch, D. S., Lengauer, W., Rödiger, K., Dreyer, K., & van den Berg, H. (2010). Novel fine-grained hardmetals by use of multiphase powder precursors and reactive nitrogen sintering. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 28(3), 362–369. https://doi.org/10.1016/j.ijrmhm.2009.11.012 ( reposiTUm)

Janisch, D. S., Lengauer, W., Rödiger, K., Dreyer, K., & Berg, H. van den. (2010). Cobalt capping: Why is sintered hardmetal sometimes covered with binder? INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 28(3), 466–471. https://doi.org/10.1016/j.ijrmhm.2010.02.006 ( reposiTUm)

Janisch, D. S., Garel, M., Eder, A., Lengauer, W., Dreyer, K., & van den Berg, H. (2008). Sintering, characterisation, and analysis of functional gradient hardmetals. International Journal of Refractory Metals and Hard Materials, 26(3), 179–189. https://doi.org/10.1016/j.ijrmhm.2007.05.006 ( reposiTUm)

Rafaja, D., Dopita, M., Masimov, M., Klemm, V., Wendt, N., & Lengauer, W. (2008). Analysis of local composition gradients in the hard-phase grains of cermets using a combination of X-ray diffraction and electron microscopy. International Journal of Refractory Metals and Hard Materials, 26(3), 263–275. https://doi.org/10.1016/j.ijrmhm.2007.03.004 ( reposiTUm)

Lengauer, W., & Dreyer, K. (2006). Tailoring Hardness and Toughness Gradients in Functional Gradient Hardmetals (FGHMs). International Journal of Refractory Metals and Hard Materials, 24, 155–161. http://hdl.handle.net/20.500.12708/173182 ( reposiTUm)

Dybkov, V., Lengauer, W., & Gas, P. (2006). Formation of boride layers at the Fe-25% Cr alloy-boron interface. Journal of Materials Science, 41(15), 4948–4960. http://hdl.handle.net/20.500.12708/173303 ( reposiTUm)

Dybkov, V., Lengauer, W., & Barmak, K. (2005). Formation of boride layers at the Fe-10%Cr alloy-boron interface. Journal of Alloys and Compounds, 398, 113–122. http://hdl.handle.net/20.500.12708/173072 ( reposiTUm)

Dybkov, V., Barmak, K., Lengauer, W., & Gas, P. (2005). Interfacial interaction of solid nickel with liquid bismuth and Bi-base alloys. Journal of Alloys and Compounds, 389(1–2), 61–74. http://hdl.handle.net/20.500.12708/173071 ( reposiTUm)

Königshofer, R., Fürnsinn, S., Steinkellner, P., Lengauer, W., Haas, R., Rabitsch, K., & Scheerer, M. (2005). Solid-state properties of hot-pressed TiB2 ceramics. International Journal of Refractory Metals and Hard Materials, 23, 350–357. http://hdl.handle.net/20.500.12708/173044 ( reposiTUm)

Eder, A., Königshofer, R., & Lengauer, W. (2005). Nitrogen-induced formation of nanostructured precipitates in the Ti-W-C-N system. Defect and Diffusion Forum, 237–240, 1121–1128. http://hdl.handle.net/20.500.12708/173048 ( reposiTUm)

Ucakar, V., Dreyer, K., & Lengauer, W. (2002). Near-Surface Microstructural Modification of (Ti,W)(C,N) Hardmetals by Nitridation. International Journal of Refractory Metals and Hard Materials, 20, 195–200. http://hdl.handle.net/20.500.12708/175591 ( reposiTUm)

Yang, Q., Lengauer, W., Koch, T., Scheerer, M., & Smid, I. (2000). Hardness and Elastic Properties of Ti(CxN1‑x), Zr(CxN1-x) and Hf(CxN1-x). Journal of Alloys and Compounds, 309, 5–9. http://hdl.handle.net/20.500.12708/175584 ( reposiTUm)

Chen, L., Lengauer, W., & Dreyer, K. (2000). Advances in Modern Nitrogen-Containing Hardmetals and Cermets. International Journal of Refractory Metals and Hard Materials, 18(2–3), 153–161. http://hdl.handle.net/20.500.12708/175593 ( reposiTUm)

Chen, L., Lengauer, W., Ettmayer, P., Dreyer, K., Daub, H.-W., & Kassel, D. (2000). Fundamentals of Liquid Phase Sintering for Modern Cermets and Cemented Carbonitrides. International Journal of Refractory Metals and Hard Materials, 18(6), 307–322. http://hdl.handle.net/20.500.12708/175592 ( reposiTUm)

Lengauer, W., Bohn, M., Wollein, B., & Lisak, K. (2000). Phase Reactions in the Nb-N System below 1400°C. Acta Materialia, 48, 2633–2638. http://hdl.handle.net/20.500.12708/175585 ( reposiTUm)

Buscaglia, V., Martinelli, A., Musenich, R., Mayr, W., & Lengauer, W. (1999). High-temperature Nitridation of Nb-Ti Alloys in Nitrogen. Journal of Alloys and Compounds, 283, 241–259. http://hdl.handle.net/20.500.12708/175594 ( reposiTUm)

Mayr, W., Lengauer, W., Rafaja, D., Bauer, J., & Bohn, M. (1999). Phase Equilibria and Multiphase Reaction Diffusion in the Cr-C and Cr-N Systems. Journal of Phase Equilibria and Diffusion, 20, 35–44. http://hdl.handle.net/20.500.12708/175600 ( reposiTUm)

Lengauer, W., & Ettmayer, P. (1998). An Investigation of the Ti-Mo-N System at Low Nitrogen Activities. International Journal of Materials Research, 10, 726–730. http://hdl.handle.net/20.500.12708/175608 ( reposiTUm)

Chen, L., Lengauer, W., & Ettmayer, P. (1998). Melting Behaviour of (Ti,Mo)C-Co and (Ti,W)C-Co Alloys. International Journal of Materials Research, 89(2), 77–82. http://hdl.handle.net/20.500.12708/175606 ( reposiTUm)

Chen, L., Lengauer, W., & Ettmayer, P. (1998). Melting Behaviour of (Ti,Mo)C-Ni and (Ti,W)C-Ni Alloys. International Journal of Materials Research, 89(2), 83–90. http://hdl.handle.net/20.500.12708/175607 ( reposiTUm)

Kral, C., Lengauer, W., Rafaja, D., & Ettmayer, P. (1998). Critical Review on Elastic Properties of Transition Metal Carbides, Nitrides and Carbonitrides. Journal of Alloys and Compounds, 265(1–2), 215–233. http://hdl.handle.net/20.500.12708/175588 ( reposiTUm)

Rafaja, D., Lengauer, W., & Wiesenberger, H. (1998). Non-metal Diffusion Coefficients for the Ta-C and Ta-N Systems. Acta Materialia, 46(10), 3477–3483. http://hdl.handle.net/20.500.12708/175589 ( reposiTUm)

Wiesenberger, H., Lengauer, W., & Ettmayer, P. (1998). Reactive Diffusion and Phase Equilibria in the V-C, Nb-C, Ta-C and Ta-N Systems. Acta Materialia, 46(2), 651–666. http://hdl.handle.net/20.500.12708/175590 ( reposiTUm)

Joguet, M., Lengauer, W., Bohn, M., & Bauer, J. (1998). High-Temperature Reactive Phase Formation in the Nb-N System. Journal of Alloys and Compounds, 269, 233–237. http://hdl.handle.net/20.500.12708/175586 ( reposiTUm)

Rafaja, D., Lengauer, W., Ettmayer, P., & Lipatnikov, V. (1998). Rietveld Analysis Of the Ordering in V8C7. Journal of Alloys and Compounds, 269, 60–62. http://hdl.handle.net/20.500.12708/175587 ( reposiTUm)

Rafaja, D., Wiesenberger, H., Lengauer, W., & Joguet, M. (1998). Combined Refinement of Diffusion Coefficients in the Nb-C and Nb-N Systems. Metallurgical and Materials Transactions A, 29, 439–446. http://hdl.handle.net/20.500.12708/175601 ( reposiTUm)

Rafaja, D., & Lengauer, W. (1997). Non-metal diffusivities in some binary transition metal nitrides and carbides. Materials Structure, 4(2), 43–55. http://hdl.handle.net/20.500.12708/175570 ( reposiTUm)

Lengauer, W., Bauer, J., Bohn, M., Wiesenberger, H., & Ettmayer, P. (1997). Electron-Probe Microanalysis of Light Elements in Multiphase Diffusion Couples. Mikrochim. Acta., 126, 279–288. http://hdl.handle.net/20.500.12708/175605 ( reposiTUm)

Mayr, W., Lengauer, W., Buscaglia, V., Bauer, J., Bohn, M., & Fialin, M. (1997). Nitridation of Ti/Nb Alloys and Solid-State Properties of delta-(Ti,Nb)N. Journal of Alloys and Compounds, 262–263, 521–528. http://hdl.handle.net/20.500.12708/175595 ( reposiTUm)

Brandstötter, J., & Lengauer, W. (1997). Multiphase Reaction Diffusion in Transition Metal - Boron Systems. Journal of Alloys and Compounds, 262–263, 390–396. http://hdl.handle.net/20.500.12708/175597 ( reposiTUm)

Aigner, K., Lengauer, W., & Ettmayer, P. (1997). Interactions in Iron-Based Cermet Systems. Journal of Alloys and Compounds, 262–263, 486–491. http://hdl.handle.net/20.500.12708/175596 ( reposiTUm)

Lipatnikov, V., Lengauer, W., Ettmayer, P., Keil, E., Groboth, G., & Kny, E. (1997). Effects of Vacancy Ordering on Structure and Properties of Vanadium Carbide. Journal of Alloys and Compounds, 261, 192–197. http://hdl.handle.net/20.500.12708/175598 ( reposiTUm)

Berger, R., Lengauer, W., & Ettmayer, P. (1997). The delta-NbN1-x → gamma-Nb4N3±x Phase Transition. Journal of Alloys and Compounds, 259, L9–L13. http://hdl.handle.net/20.500.12708/175599 ( reposiTUm)

Teichmann, C., Lengauer, W., Ettmayer, P., Bauer, J., & Bohn, M. (1997). Reaction Diffusion and Phase Equilibria in the V-N System. Metallurgical and Materials Transactions A, 28, 837–842. http://hdl.handle.net/20.500.12708/175602 ( reposiTUm)

Lengauer, W., Rafaja, D., Zehetner, G., & Ettmayer, P. (1996). The Hafnium-Nitrogen System: Phase Equilibria and Nitrogen Diffusivities Obtained From Diffusion Couples. Acta Materialia, 44(8), 3331–3338. http://hdl.handle.net/20.500.12708/175582 ( reposiTUm)

Rafaja, D., Lengauer, W., & Ettmayer, P. (1996). Multiphase Layer-Growth Kinetics in Finite Gas-Solid Diffusion Couples. Acta Materialia, 44(12), 4835–4844. http://hdl.handle.net/20.500.12708/175579 ( reposiTUm)

Binder, S., Lengauer, W., Ettmayer, P., Bauer, J., Debuigne, J., & Bohn, M. (1995). Phase Equilibria in the Systems Ti-C-N, Zr-C-N and Hf-C-N. Journal of Alloys and Compounds, 217, 128–136. http://hdl.handle.net/20.500.12708/175581 ( reposiTUm)

Lengauer, W. (1995). Multiphase Reaction Diffusion in Transition Metal-Carbon and Transition Metal-Nitrogen Systems. Journal of Alloys and Compounds, 229, 80–92. http://hdl.handle.net/20.500.12708/175583 ( reposiTUm)

Ettmayer, P., Kolaska, H., Lengauer, W., & Dreyer, K. (1995). Ti(C,N) Cermets - Metallurgy and Properties. International Journal of Refractory Metals and Hard Materials, 13, 343–351. http://hdl.handle.net/20.500.12708/175578 ( reposiTUm)

Lengauer, W., Binder, S., Aigner, K., Ettmayer, P., Guillou, A., Debuigne, J., & Groboth, G. (1995). Solid-State Properties of Group IVb Carbonitrides. Journal of Alloys and Compounds, 217, 137–147. http://hdl.handle.net/20.500.12708/175580 ( reposiTUm)

Wally, P., Binder, S., Ettmayer, P., & Lengauer, W. (1995). Reaction of Compact Carbonitrides with Liquid Binder Metals. Journal of Alloys and Compounds, 230, 53–57. http://hdl.handle.net/20.500.12708/175603 ( reposiTUm)

Wally, P., Ettmayer, P., & Lengauer, W. (1995). The Ti-Mo-C-N System: Stability of the (Ti,Mo)(C,N)1-x Phase. Journal of Alloys and Compounds, 228, 96–101. http://hdl.handle.net/20.500.12708/175604 ( reposiTUm)

Maschke, J., Biagi, A., Fürst, M., & Lengauer, W. (2021). Influence of Cu addition on the properties of Ti(C,N)-Co/Ni-based cermets. In Proceedings EuroPM2021 (p. 7). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/49661 ( reposiTUm)

Hatzl, G., Fürst, M., & Lengauer, W. (2021). (W,Mo)C-based hardmetals with Ni-rich binders. In Proceedings EuroPM2021 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/49662 ( reposiTUm)

Waldner, C., Fürst, M., & Lengauer, W. (2020). Influence of the hard-phase alloy status on the microstructure evolution and properties of Ti(C,N)-based cermets. In Proc. EuroPM 2020 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/50783 ( reposiTUm)

Lengauer, W., Duretek, I., Fürst, M., Gonzalez-Gutierrez, J., Schuschnigg, S., & Kukla, C. (2019). Filament-extrusion 3D printing of hardmetal and cermet parts. In Extended Abstracts ICSHM 11 (p. 2). http://hdl.handle.net/20.500.12708/50563 ( reposiTUm)

Lengauer, W., Duretek, I., Fürst, M., Gonzalez-Gutierrez, J., Schuschnigg, S., & Kukla, C. (2019). Fused-filament printing of hardmetals and cermets with feedstock from RTP powders. In Proc. EuroPM2019 (p. 7). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/50562 ( reposiTUm)

Lengauer, W., Duretek, I., Schwarz, V., Kukla, C., Kitzmantel, M., Neubauer, E., Lieberwirth, C., & Morrison, V. (2018). Preparation and properties of extrusion-based 3D-printed hardmetal and cermet parts. In Proc. Euro PM 2018 (p. 8). Proc. Euro PM 2018. http://hdl.handle.net/20.500.12708/50260 ( reposiTUm)

Kitzmantel, M., Lengauer, W., Duretek, I., Schwarz, V., Kukla, C., Lieberwirth, C., Morrison, V., Wilfinger, T., & Neubauer, E. (2018). Potential of Extrusion Based 3D-printed Hardmetal and Cermet Parts. In Proc. World PM 2018 (pp. 938–945). Proceedings World PM 2018. http://hdl.handle.net/20.500.12708/50261 ( reposiTUm)

Lengauer, W., Schwarz, V., & Scagnetto, F. (2018). Interdependency of hard phase and binder phase composition in Ti(C,N)-based cermets. In #gtProc. World PM 2018 (pp. 817–825). Proceedings World PM 2018. http://hdl.handle.net/20.500.12708/50258 ( reposiTUm)

Schwarz, V., Scagnetto, F., & Lengauer, W. (2018). Mass-spectrometric investigation of outgasing of Ti(C,N)-WC/Mo2C-(Ta,Nb)C-Co/Ni cermets. In Proc. Euro PM 2018 (p. 8). Proc. Euro PM 2018. http://hdl.handle.net/20.500.12708/50262 ( reposiTUm)

Shi, K., Schwarz, V., & Lengauer, W. (2017). Preparation and properties of (W,Mo)C powders and (W,Mo)C-Co cemented carbides. In Proc. 19th Plansee Seminar (pp. 12–17). http://hdl.handle.net/20.500.12708/49944 ( reposiTUm)

Hochenauer, R., & Lengauer, W. (2017). Structure and Properties of WC-MC-Co hardmetals and of their MC and M(C,N) phases. In Proc. EuroPM 2017 (p. 8). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/49945 ( reposiTUm)

Schwarz, V., Zivadinovic, I., Lisnard, B., Traxler, F., Viala, R., & Lengauer, W. (2016). Optimised properties of Ti(C,N)-based cermets by variation of the W/Mo ratio. In Proc. World PM 2016. WorldPM2016 Congress and Exhibition, Hamburg, Germany. European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/49452 ( reposiTUm)

Schwarz, V., Shi, K., & Lengauer, W. (2016). Metallurgy and Properties of Mo-doped WC-Co and (W,Mo)C-Co hardmetals. In Proc. World PM 2016. WorldPM2016 Congress and Exhibition, Hamburg, Germany. European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/49451 ( reposiTUm)

Wawrzik, S., Buchegger, C., Lengauer, W., van den Berg, H., Rödiger, K., Wolf, M., Helldörfer, A., Bernardi, J., & Gruber, J. (2015). Precipitation of intermetallic phases in coarse-grained hardmetals by low-temperature annealing. In Proceedings EuroPM 2015 (p. 7). EPMA. http://hdl.handle.net/20.500.12708/49161 ( reposiTUm)

Wawrzik, S., Buchegger, C., Wetzel, M., & Lengauer, W. (2013). Rim-Nitrided WC Powder: Preparation, Properties and Use for Hardmetals. In Proceedings (p. 10). http://hdl.handle.net/20.500.12708/48458 ( reposiTUm)

Buchegger, C., Koos, R., Lengauer, W., Rödiger, K., & van den Berg, H. (2013). Hardmetals with alternative Fe/Co/Ni and Fe/Ni binders - a study on Mo doping, mechanical properties and creep behaviour. In Proceedings Euro PM2013 (pp. 1–9). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/48462 ( reposiTUm)

Wawrzik, S., de Barros, T., & Lengauer, W. (2013). Surface- and Interface-Zone Evolution of Cermets and Cermet/Hardmetal Laminates. In Proceedings (pp. 1–13). http://hdl.handle.net/20.500.12708/48459 ( reposiTUm)

Buchegger, C., & Lengauer, W. (2013). Creep Behaviour of Hardmetals with Alternative Binder Alloys at Elevated Temperatures. In Proceedings (pp. 1–9). http://hdl.handle.net/20.500.12708/48461 ( reposiTUm)

Buchegger, C., Langlade, J., & Lengauer, W. (2013). Interdependencies of Grain-Growth Inhibitor Diffusion in WC-Co Hardmetals. In Proceedings (pp. 1–11). http://hdl.handle.net/20.500.12708/48460 ( reposiTUm)

Wetzel, M., Wawrzik, S., Buchegger, C., Gierl, C., & Lengauer, W. (2012). Interaction of nitrogen with WC and nitrogen-assisted sintering of hardmetals. In Proceedings Euro PM2012 (Issue Session 3). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/164846 ( reposiTUm)

Wawrzik, S., Demoly, A., Veitsch, C., & Lengauer, W. (2011). Ti(C,N)-based cermets: evolution and stability of microstructure within sintering and high-temperature/high-pressure annealing. In Euro PM2011 Proceedings: PM Tool Materials (Issue Vol.1). http://hdl.handle.net/20.500.12708/164849 ( reposiTUm)

Brieseck, M., Hünsche, I., Caspers, B., Gille, G., Bohn, M., & Lengauer, W. (2011). Diffusion Behaviour of the Grain-Growth Inhibitor VC in Hardmetals. In DIMAT 8 (pp. 1–10). DIMAT 8. http://hdl.handle.net/20.500.12708/48065 ( reposiTUm)

Lengauer, W., Bohn, M., Hochenauer, R., & Lauter, L. (2010). Binder Phase Analysis for Property Improvement of WC-Co and WC-TiC-(Ta,Nb)C-Co Hardmetals. In Proceedings PM2010 Volume 3 (p. 8). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/47038 ( reposiTUm)

Demoly, A., Veitsch, C., Lengauer, W., & Rabitsch, K. (2010). Effect of Submicron Ti(C,N) on the Microstructure and the Mechanical Properties of Ti(C,N)-Based Cermets. In Proceedings PM2010 (p. 8). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/47033 ( reposiTUm)

Brieseck, M., Hünsche, I., Caspers, B., Szesny, B., & Lengauer, W. (2009). Optimised Sintering and Grain-Growth Inhibition of Ultrafine and Near-Nano Hardmetals. In Euro PM2009. “Euro PM2009” International Powder Metallurgy Congress & Exhibition, Copenhagen, EU. European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/46917 ( reposiTUm)

Janisch, D. S., Lengauer, W., Rödiger, K., Dreyer, K., & van den Berg, H. (2009). Novel Fine-Grained Hardmetals by Use of Multiphase Powder Precursors and Reactive Nitrogen Sintering. In L. Sigl, P. Rödhammer, & H. Wildner (Eds.), Proceedings of International Conference on High Performance P/M Materials (p. HM9/1-HM9/11). Plansee Group. http://hdl.handle.net/20.500.12708/46666 ( reposiTUm)

Janisch, D. S., Lengauer, W., Rödiger, K., Dreyer, K., & van den Berg, H. (2009). In-Situ Bulk Nitridation of Hardmetal for Gradient Sintering. In L. Sigl, P. Rödhammer, & H. Wildner (Eds.), Proceedings of International Conference on High Performance P/M Materials (p. HM49/1-HM49/12). Plansee Group. http://hdl.handle.net/20.500.12708/46668 ( reposiTUm)

Reichel, B., Wagner, K., Janisch, D. S., & Lengauer, W. (2009). On the Use of Alloyed W-Co-C-Phases as a Simultaneous W and Co Source in WC-Co and WC-TiC-(Ta,Nb)C-Co Hardmetals. In L. Sigl, P. Rödhammer, & H. Wildner (Eds.), Proceedings of International Conference on High Performance P/M Materials (p. HM46/1-HM46/13). Plansee Group. http://hdl.handle.net/20.500.12708/46673 ( reposiTUm)

Brieseck, M., Bohn, M., & Lengauer, W. (2009). Diffusion and Solubility of Cr in WC. In L. Sigl, P. Rödhammer, & H. Wildner (Eds.), Proceedings of International Conference on High Performance P/M Materials (p. HM45/1-HM45/11). Plansee Group. http://hdl.handle.net/20.500.12708/46674 ( reposiTUm)

Janisch, D. S., Lengauer, W., Rödiger, K., Dreyer, K., & van den Berg, H. (2009). Cobalt Capping: Why Sintered Hardmetal is Sometimes Covered with Binder. In L. Sigl, P. Rödhammer, & H. Wildner (Eds.), Proceedings of International Conference on High Performance P/M Materials (p. HM52/1-HM52/9). Plansee Group. http://hdl.handle.net/20.500.12708/46671 ( reposiTUm)

Dopita, M., Rafaja, D., Seifert, H. J., Janisch, D. S., & Lengauer, W. (2009). Capability of the Combination of Electron Backscatter Diffraction and X-ray Diffraction for the Structural Investigation of Hardmetals. In L. Sigl, P. Rödhammer, & H. Wildner (Eds.), Proceedings of International Conference on High Performance P/M Materials (p. AT4/1-AT4/13). Plansee Group. http://hdl.handle.net/20.500.12708/46676 ( reposiTUm)

Brieseck, M., Gneiß, B., Wagner, K., Wagner, S., & Lengauer, W. (2009). A Straightforward Method for Analysing the Grain-Size Distribution in WC-Co Hardmetals. In L. Sigl, P. Rödhammer, & H. Wildner (Eds.), Proceedings of International Conference on High Performance P/M Materials (p. AT13/1-AT13/10). Plansee Group. http://hdl.handle.net/20.500.12708/46675 ( reposiTUm)

Useldinger, R., Böhlke, W., & Lengauer, W. (2009). Sintering Phenomena of Titanium Carbonitride Cermet Alloys. In L. Sigl, P. Rödhammer, & H. Wildner (Eds.), Proceedings of International Conference on High Performance P/M Materials (p. HM24/1-HM24/12). Plansee Group. http://hdl.handle.net/20.500.12708/46677 ( reposiTUm)

Lengauer, W., Wagner, S., & Wawrzik, S. (2009). Angewandte Materialforschung und Werkstoffentwicklung. In H. Kolaska (Ed.), Energie- und Ressourceneffizienz durch Pulvermetallurgie (pp. 361–362). Heimdall-Verlag. http://hdl.handle.net/20.500.12708/46680 ( reposiTUm)

Franzkowiak, A., Liersch, A., Lengauer, W., & Schöppl, O. (2009). Manufacturing strategies for silicon nitride rolling elements regarding product quality, sustainability and cost efficiency. In W. J. Bartz (Ed.), Nano Technology (pp. 459–463). Österreichische Tribologische Gesellschaft. http://hdl.handle.net/20.500.12708/46391 ( reposiTUm)

Schädl, K., Janisch, D. S., & Lengauer, W. (2008). On the use of oxides for establishing cubic carbides in P-type hardmetals. In Proceedings Euro PM2008 (pp. 193–198). European Powder Metallurgy Association EPMA, Shrewsbury UK,. http://hdl.handle.net/20.500.12708/46364 ( reposiTUm)

Janisch, D. S., Dreyer, K., Rödiger, K., van den Berg, H., & Lengauer, W. (2008). Can we influence hardmetal properties by sintering in carbon monoxide? In Proceedings (pp. 225–230). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/46365 ( reposiTUm)

Steinkellner, P., Etschmaier, A., Rabitsch, K., & Lengauer, W. (2008). Carbothermal Synthesis of TiC and Ti(C,N) powders in a lab-scale reactor. In Proc. ICC 2, 2nd Int. Congress on Ceramics 2008 (CD edition) (pp. 1–6). ISTEC-CNR, Institute of Science and Technology for Ceramics-National Research Council. http://hdl.handle.net/20.500.12708/46359 ( reposiTUm)

Schädl, K., Etschmaier, A., & Lengauer, W. (2007). Reactively sintered hardmetals from alloyed W-Co-C phases. In Euro PM 2007 Proceedings (pp. 249–255). European Powder Metallurgy Association, Shrewsbury (UK). http://hdl.handle.net/20.500.12708/45990 ( reposiTUm)

Janisch, D. S., Garel, M., Lengauer, W., Dreyer, K., & van den Berg, H. (2006). Controlling the Microstructure Evolution of Hardmetals via the Sintering Atmosphere. In Euro PM 2006 Proceedings (pp. 3–8). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/45541 ( reposiTUm)

Dreyer, K., van den Berg, H., Eder, A., Janisch, D. S., & Lengauer, W. (2006). Microstruture evolution in sintering of Functional Gradient Hardmetals upon various gas-phase treatment conditions. In E. Kwang Yong & Y.-S. Kim (Eds.), Extended Abstracts of 2006 Powder Metallurgy World Congress (p. 893). Korean Powder Metallurgy Institute. http://hdl.handle.net/20.500.12708/45558 ( reposiTUm)

Useldinger, R., Steinkellner, P., Wendt, N., Böhlke, W., & Lengauer, W. (2006). Commercial aspects, Sintering and Structure of Ti(C,N)-based Cermets. In E. Kwang Yong & Y.-S. Kim (Eds.), Extended Abstracts of 2006 Powder Metallurgy World Congress (p. 106). Korean Powder Metallurgy Institute. http://hdl.handle.net/20.500.12708/45556 ( reposiTUm)

Lengauer, W., & Hochenauer, R. (2006). Hartmetall: Stand heute und morgen. In H. Kolaska (Ed.), Pulvermetallurgie in Wissenschaft und Praxis (pp. 297–334). http://hdl.handle.net/20.500.12708/45559 ( reposiTUm)

Lengauer, W. (2005). Diffusional control of the near-surface microstructure in functional gradient hardmetals. In Proceedings 1st International Conference on Diffusion in Solids and Liquids (pp. 460–466). Materials Science and Engineering/Wiley-VCH. http://hdl.handle.net/20.500.12708/45418 ( reposiTUm)

Eder, A., Lengauer, W., Dreyer, K., van den Berg, H., Daub, H.-W., & Kassel, D. (2005). Phase formation during sintering of functionally graded hardmetals. In G. Kneringer (Ed.), Proceedings 16th Plansee Seminar (pp. 81–94). http://hdl.handle.net/20.500.12708/45419 ( reposiTUm)

Eder, A., Lengauer, W., Dreyer, K., van den Berg, H., Daub, H.-W., & Kassel, D. (2005). Gradient microstructure engineering in hardmetals. In G. Kneringer (Ed.), Proceedings 16th Interantional Plansee Seminar (pp. 120–135). http://hdl.handle.net/20.500.12708/45421 ( reposiTUm)

Dybkov, V., Lengauer, W., & Barmak, K. (2005). Abrasive Wear Resistance of Pack-Borided Iron-Chromium Alloys. In G. Kneringer (Ed.), Proceedings 16th International Plansee Seminar (pp. 999–1009). http://hdl.handle.net/20.500.12708/45420 ( reposiTUm)

Ucakar, V., Königshofer, R., Lengauer, W., Dreyer, K., Kassel, D., Daub, H.-W., & van den Berg, H. (2002). High-Pressure Nitrogen Modified Functional Gradient Hardmetals: Preparation, Characterisation and Cutting-Performance. In Proc. EURO PM2002 (pp. 136–141). Proceedings. http://hdl.handle.net/20.500.12708/45057 ( reposiTUm)

Lengauer, W., Lovonyak, M., Dreyer, K., & Rödiger, K. (2002). New W-Fe/Ni/Cr-B-Based Cermets for Cutting Operations. In Proc. EURO PM2002 (pp. 174–180). Proceedings. http://hdl.handle.net/20.500.12708/45059 ( reposiTUm)

Lengauer, W. (2015). Nitrides: Transition Metal Solid-State Chemistry. In Encyclopedia of Inorganic and Bioinorganic Chemistry (pp. 1–24). John Wiley & Sons. http://hdl.handle.net/20.500.12708/28937 ( reposiTUm)

Ettmayer, P., & Lengauer, W. (2012). Nitrides. In Ullmann’s Encyclopedia of Industrial Chemistry (pp. 227–249). Verlag Chemie, Weinheim. http://hdl.handle.net/20.500.12708/30346 ( reposiTUm)

Lengauer, W. (2012). Carbides: Transition Metal Solid-state Chemistry. In Encyclopedia of Inorganic and Bioinorganic Chemistry (pp. 1–10). John Wiley & Sons. http://hdl.handle.net/20.500.12708/27836 ( reposiTUm)

Lengauer, W., & Eder, A. (2005). Nitrides: Transition Metal Solid-state Chemistry. In R. B. King (Ed.), Encyclopedia of Inorganic Chemistry (pp. 3515–3531). John Wiley & Sons. http://hdl.handle.net/20.500.12708/25292 ( reposiTUm)

Lengauer, W., & Eder, A. (2005). Carbides: Transition Metal Solid-state Chemistry. In R. B. King (Ed.), Encyclopedia of Inorganic Chemistry (pp. 674–690). John Wiley & Sons. http://hdl.handle.net/20.500.12708/25291 ( reposiTUm)

Lengauer, W. (2000). Transition Metal Carbides, Nitrides and Carbonitrides. In Handbook of Ceramic Hard Materials (pp. 202–252). Wiley-VCH. http://hdl.handle.net/20.500.12708/30345 ( reposiTUm)

Lengauer, W. (Ed.). (2018). Solid-State Properties of Nitrides, Carbonitrides and Carbonitride-Based Cermets. Trans Tech Publications Inc. http://hdl.handle.net/20.500.12708/24472 ( reposiTUm)

Scagnetto, F., & Lengauer, W. (2022, October 9). Ti(C,N)-based Cermets for Sawblades: Preparation, Properties, Testing and Upscaling [Conference Presentation]. WorldPM2022, Lyon, France. ( reposiTUm)

Wagner, S., Buchegger, C., Bohn, M., & Lengauer, W. (2022, May 29). Solubility of V and Cr in Fe-Co-Ni binders and properties of corresponding hardmetals [Poster Presentation]. 20th Plansee Seminar 2022, Reutte, Austria. ( reposiTUm)

Wagner, S., & Lengauer, W. (2022, October 9). Properties of hardmetals with different Fe-Co-Ni binder [Conference Presentation]. WorldPM2022, France. ( reposiTUm)

Lengauer, W., Fürst, M., & Hatzl, G. (2022, May 29). Cemented carbides with (W,Mo)C hard phase and Ni-based binder alloys [Conference Presentation]. 20th Plansee Seminar 2022, Reutte, Austria. ( reposiTUm)

Kukla, C., Duretek, I., & Lengauer, W. (2022, November 24). Filamentbasierter 3D-Druck für Metalle, Hartmetalle und Cermets [Conference Presentation]. Hagener Symposium Pulvermetallurgie, Hagen, Germany. ( reposiTUm)

Lengauer, W. (2020). Microstructure and properties of Ti(C,N)-based cermets. Online Conference “EuroPM2020 Virtual Congress,” Chantilly, France. http://hdl.handle.net/20.500.12708/101460 ( reposiTUm)

Duretek, I., Fürst, M., Gonzalez-Gutierrez, J., Schuschnigg, S., Kukla, C., & Lengauer, W. (2019). 3D printing of titanium carbonitride cermets. 10th International Symposion on Nitrides 2019, Barcelona, Spain. http://hdl.handle.net/20.500.12708/101203 ( reposiTUm)

Lengauer, W. (2018). Preparation and properties of extrusion-based 3D-printed hardmetal and cermet parts. EuroPM2018 Congress & Exhibition, Bilbao, Spain. http://hdl.handle.net/20.500.12708/100760 ( reposiTUm)

Lengauer, W. (2018). Interdependency of hard phase and binder phase composition in Ti(C,N)-based cermets. WorldPM2018 - 2018 World Congress on Powder Metallurgy, Beijing, China. http://hdl.handle.net/20.500.12708/100762 ( reposiTUm)

Lengauer, W. (2017). Recent Work on Ti(C,N)-Based Cermets. Workshop ISNT 2017, Noboribetsu, Japan. http://hdl.handle.net/20.500.12708/100371 ( reposiTUm)

Lengauer, W. (2016). Overview on recent and future developments in hardmetal research (metallurgy). EHMG Open Meeting, Hamburg, Germany. http://hdl.handle.net/20.500.12708/100055 ( reposiTUm)

Lengauer, W. (2016). Hardmetal and Cermet Tools: Industrial Grades and Applications. ASMET Meeting, Prag, Czechia. http://hdl.handle.net/20.500.12708/100054 ( reposiTUm)

Findenig, G., Buchegger, C., Lengauer, W., Veitsch, C., & Demoly, A. (2015). Investigation of the main influencing parameters on the degassing behaviour of titanium carbonitrides using mass spectrometry. AMPT 2015, Madrid, Spain. http://hdl.handle.net/20.500.12708/99843 ( reposiTUm)

Lengauer, W. (2015). Ti(C,N)-based Cermets: Past, Present and Future. AMPT 2015, Madrid, Spain. http://hdl.handle.net/20.500.12708/99842 ( reposiTUm)

Buchegger, C., Lengauer, W., Bernardi, J., Gruber, J., Ntaflos, T., Kiraly, F., & Langlade, J. (2014). Diffusion parameters of grain-growth inhibitors in WC based hardmetals with Co, Fe/Ni and Fe/Co/Ni binder alloys. Int. Conf. on the Science of Hard Materials, ICSHM10, Cancun, Mexiko, Non-EU. http://hdl.handle.net/20.500.12708/99583 ( reposiTUm)

Lengauer, W., & Buchegger, C. (2013). Hardmetals with alternative binders: general properties and high-temperature creep. Winterev 2013, Barcelona, EU. http://hdl.handle.net/20.500.12708/99245 ( reposiTUm)

Lengauer, W., Rödiger, K., & van den Berg, H. (2012). Nitrogen-assisted sintering for improvement of hardmetals and cermets. 7. Int. Symposium on Nitrides, St. Malo, EU. http://hdl.handle.net/20.500.12708/98936 ( reposiTUm)

Wetzel, M., Wawrzik, S., Buchegger, C., Gierl, C., & Lengauer, W. (2012). Interaction of nitrogen with WC and nitrogen-assisted sintering of hardmetals. EuroPM 2012, Basel, Non-EU. http://hdl.handle.net/20.500.12708/98939 ( reposiTUm)

Wawrzik, S., de Barros, T., & Lengauer, W. (2012). Near-Surface and Inferface Microstructures in (Ti,W)(C,N)-Co,Ni Cermets and (Ti,W)(C,N)-Co, Ni-WC/Co Laminates. WorldPM 2012, Yokohama, Non-EU. http://hdl.handle.net/20.500.12708/98941 ( reposiTUm)

Lengauer, W., Bohn, M., & Bauer, J. (2012). Thermochemistry of the preparation of well-defined nitride reference materials for EPMA. 7. Int. Symposium on Nitrides, St. Malo, EU. http://hdl.handle.net/20.500.12708/98942 ( reposiTUm)

Lengauer, W., & Bohn, M. (2011). Thermo-chemical basis of the preparation of well-defined boride, carbide and nitride standards for EMPA. EMAS 12, Angers, EU. http://hdl.handle.net/20.500.12708/98943 ( reposiTUm)

Wawrzik, S., Demoly, A., Veitsch, C., & Lengauer, W. (2011). Ti(C,N)-based cermets: evolution and stability of microstructure within sintering and high-temperature/high pressure annealing. EuroPM 2011, Barcelona, EU. http://hdl.handle.net/20.500.12708/98944 ( reposiTUm)

Lengauer, W. (2011). Functional gradient hardmetals: from research to application. New Materials & Materials Technolgies, B2B/B2R&D Meeting, Bratislava, EU. http://hdl.handle.net/20.500.12708/98945 ( reposiTUm)

Brieseck, M., Hünsche, I., Caspers, B., Gille, G., Bohn, M., & Lengauer, W. (2011). Diffusion Behaviour of Grain-Growth Inhibitors in Hardmetals. DIMAT 8 2011, Dijon, France. http://hdl.handle.net/20.500.12708/98946 ( reposiTUm)

Lengauer, W., Koos, R., & Wagner, S. (2010). Alternative Binder Phase Materials for Hardmetals. PM 2010 Powder Metallurgy World Congress & Exhibition - Special Interest Seminar, Florence, EU. http://hdl.handle.net/20.500.12708/98382 ( reposiTUm)

Janisch, D. S., Lengauer, W., Dreyer, K., Rödiger, K., & van den Berg, H. (2008). Welchen Einfluss haben Kohlenmonoxid-Stickstoff Sinteratmosphären auf die Eigenschaften von Hartmetall? 54. Metallkunde-Kolloquium, Lech am Arlberg, Austria. http://hdl.handle.net/20.500.12708/97792 ( reposiTUm)

Schädl, K., Veitsch, C., & Lengauer, W. (2008). Hardmetals with Increased Fracture Toughness Prepared by Reactive Sintering. Junior EUROMAT 2008, Lausanne (CH), Non-EU. http://hdl.handle.net/20.500.12708/97947 ( reposiTUm)

Lengauer, W. (2008). Challenges in the Property Improvement of Hardmetals and Cermets. 4th Int. Conf. on Diffusion in Solids and Liquids - DSL 2008, Barcelona (E), EU. http://hdl.handle.net/20.500.12708/97951 ( reposiTUm)

Lengauer, W. (2008). Novel Concepts of Microstructure Refinement for Property Enhancement of Hardmetals. Advanced Processes for Novel Functional Materials APNFM 2008, Dresden, EU. http://hdl.handle.net/20.500.12708/97950 ( reposiTUm)

Lengauer, W. (2006). Diffusional phenomena in microstructure engineering of hardmetals and cermets. CIMTEC 2006 and 4th Forum on New Materials, Acireale (I), EU. http://hdl.handle.net/20.500.12708/97327 ( reposiTUm)

Ruess, G., Schöppl, O., Liersch, A., Lengauer, W., & Köttritsch, H. (2004). Nitridierungsexperimente an Polymer/Silizid-Compositen. 50. Metallkunde-Kolloquium, Lech am Arlberg, Austria. http://hdl.handle.net/20.500.12708/97299 ( reposiTUm)

Lengauer, W., & Bohn, M. (2003). Transition Metal Carbides and Nitrides As Standard Materials: Diffusional Preparation And Suitability For EPMA. EMAS 2003, 8th Meeting of the European Microbeam Analysis Society, Cadiz (E), Austria. http://hdl.handle.net/20.500.12708/96616 ( reposiTUm)

Rödiger, K., Dreyer, K., Lengauer, W., Klocke, F., Gerschwiler, K., & Langenbach, P.-H. (2002). Development of New Hardmetals and Coatings for the Turning of Austenitic Stainless Steels. Materials Week 2002, Munich (D), Austria. http://hdl.handle.net/20.500.12708/95830 ( reposiTUm)

Lengauer, W. (2002). Carbide und Nitride der Übergangsmetalle. DGM-Seminar “Hartstoffe,” TU Darmstadt, Austria. http://hdl.handle.net/20.500.12708/95826 ( reposiTUm)

Ucakar, V., Lengauer, W., Dreyer, K., Daub, H.-W., Kassel, D., & van den Berg, H. (2002). Herstellung und Eigenschaften druckstickstoff-beaufschlagter Hartmetalle. 48. Metallkunde-Kolloquium der Universität Leoben, Lech am Arlberg, Austria. http://hdl.handle.net/20.500.12708/95827 ( reposiTUm)

Lengauer, W. (2002). Reaction Diffusion in Transition Metal Carbides, Nitrides and Carbonitrides. CIMTEC 2002 and 3rd Forum on New Materials, Firenze (I), Austria. http://hdl.handle.net/20.500.12708/95828 ( reposiTUm)

Dreyer, K., Rödiger, K., Westphal, H., Lengauer, W., & Lovonyak, M. (2002). Entwicklung neuer Hartmetalle und Hartstoffschichten für die Bearbeitung austenitischer Stahlwerkstoffe. 1.WING-Konferenz Werkstoffinnovation in Industrie und Gesellschaft, Weimar, Austria. http://hdl.handle.net/20.500.12708/96617 ( reposiTUm)