Journal Articles

Stampfl, J., & Danninger, H. (2024). Editorial. BHM Berg- Und Hüttenmännische Monatshefte, 169(1), 1–2. https://doi.org/10.1007/s00501-023-01415-7 ( reposiTUm)

Danninger, H. (2024). Gerhard Jangg - obituary. Powder Metallurgy, 67(1), 1–2. https://doi.org/10.1177/00325899231223301 ( reposiTUm)

Geroldinger, S., Hojati, M., De Oro Calderon, R., Gierl-Mayer, C., Danninger, H., & Hellein, R. (2024). Hybrid Alloyed Sinter Hardening Steels Based on Different Prealloyed Powders. HTM - Journal of Heat Treatment and Materials, 79(3), 147–158. https://doi.org/10.1515/htm-2024-0011 ( reposiTUm)

Hojati, M., Gierl-Mayer, C., & Danninger, H. (2024). Impact Fracture Behaviour of Powder Metallurgy Steels Sintered at Different Temperatures. BHM Berg- Und Hüttenmännische Monatshefte, 169(3), 132–139. https://doi.org/10.1007/s00501-024-01428-w ( reposiTUm)

Auinger, M., Büchler, M., Schöneich, H.-G., Gierl-Mayer, C., & Danninger, H. (2023). Hydrogen accumulation and diffusion in cylindrical-shaped pipeline steels with coating defects. International Journal of Hydrogen Energy, 48(88), 34454–34462. https://doi.org/10.1016/j.ijhydene.2023.05.181 ( reposiTUm)

Geroldinger, S., Teissedre, L., de Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2023). Hardenability of PM steel alloyed using tailored master alloys. HTM - Journal of Heat Treatment and Materials, 78(6), 341–351. https://doi.org/10.1515/htm-2023-0028 ( reposiTUm)

Weißgärber, T., & Danninger, H. (2023). On the 100th birthday of Prof. Dr.-Ing. habil. Dr.-Ing. E.h. Werner Schatt. Powder Metallurgy, 66(1), 1–2. https://doi.org/10.1080/00325899.2023.2167630 ( reposiTUm)

Hojati, M., Gierl-Mayer, C., & Danninger, H. (2023). Mechanical properties of sinter hardened sintered steels prepared by hybrid alloying. European Journal of Materials, 3(1), Article 2202714. https://doi.org/10.1080/26889277.2023.2202714 ( reposiTUm)

de Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2023). Microstructural evolution during sintering of Fe-Cr-C steels prepared from admixed elemental powders. Powder Metallurgy, 66(5), 450–460. https://doi.org/10.1080/00325899.2023.2201487 ( reposiTUm)

Stepan, T., Tété, L., Laundry-Mottiar, L., Romanovskaia, E., Hedberg, Y. S., Danninger, H., & Auinger, M. (2022). Effect of nanoparticle size on the near-surface pH-distribution in aqueous and carbonate buffered solutions. Electrochimica Acta, 409(139923), 139923. https://doi.org/10.1016/j.electacta.2022.139923 ( reposiTUm)

Mitterlehner, M., Danninger, H., Gierl-Mayer, C., Frank, J., Tomischko, W., & Gschiel, H. (2022). Novel testing device and routine to characterise the spreadability of powders for powder bed fusion processes – a problem-oriented approach. Powder Metallurgy, 65(4), 318–334. https://doi.org/10.1080/00325899.2021.2023414 ( reposiTUm)

Hojati, M., Danninger, H., & Gierl-Mayer, C. (2022). Mechanical and Physical Properties of Differently Alloyed Sintered Steels as a Function of the Sintering Temperature. Metals, 12(1), 13. https://doi.org/10.3390/met12010013 ( reposiTUm)

De Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2022). Thermoanalytical techniques for characterizing sintering processes in ferrous powder metallurgy. Journal of Thermal Analysis and Calorimetry. https://doi.org/10.1007/s10973-022-11740-7 ( reposiTUm)

Walter, T., Zareghomsheh, M., Khatibi, G., & Danninger, H. (2021). Adhesion properties of thin film multilayers: Comparison of nanoindentation and four-point-bending techniques. Materials Science Forum, 1016, 1561–1568. http://hdl.handle.net/20.500.12708/137219 ( reposiTUm)

Geroldinger, S., de Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2021). Tailored liquid phases for enhanced sintering of advanced PM-steels. Materials Science Forum, 1016, 470–475. http://hdl.handle.net/20.500.12708/137217 ( reposiTUm)

Hojati, M., Gierl-Mayer, C., & Danninger, H. (2021). Iron-carbon masteralloy as sintering activator for low alloy powder metallurgy steels. Materials Science Forum, 1016, 561–567. http://hdl.handle.net/20.500.12708/137218 ( reposiTUm)

Danninger, H., Gierl-Mayer, C., Prokofyev, M., Huemer, M.-C., de Oro Calderon, R., Hellein, R., Müller, A., & Stetina, G. (2021). Manganese - a promising element also in high alloy sintered steels. Powder Metallurgy, 64(2), 115–125. https://doi.org/10.1080/00325899.2021.1886717 ( reposiTUm)

Praig, V. G., Schintlmeister, A., Auinger, M., Danninger, H., & Stöger-Pollach, M. (2021). High-resolution topochemical analysis and thermochemical simulations of oxides and nitrides at grain boundaries and within the grains of a low alloy Mn-Cr hot-rolled steel sheet. Journal of Alloys and Compounds, 876(160069), 160069. https://doi.org/10.1016/j.jallcom.2021.160069 ( reposiTUm)

Geroldinger, S., De Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2021). Sinter Hardening PM Steels Prepared through Hybrid Alloying. HTM - Journal of Heat Treatment and Materials, 76(2), 105–119. https://doi.org/10.1515/htm-2020-0007 ( reposiTUm)

Mitterlehner, M., Danninger, H., Gierl-Mayer, C., & Gschiel, H. (2021). Investigation of the influence of powder moisture on the spreadability using the spreading tester. BHM Berg- Und Hüttenmännische Monatshefte, 166(1), 14–22. https://doi.org/10.1007/s00501-020-01067-x ( reposiTUm)

Höfler, T., Linder, B., Angeli, G., Gierl-Mayer, C., Danninger, H., & Auinger, M. (2021). Internal oxidation and formation of Si/Al-enriched oxide bands in the scale of electrical steel grades. Corrosion Science, 187(109502), 109502. https://doi.org/10.1016/j.corsci.2021.109502 ( reposiTUm)

Danninger, H., de Oro Calderon, R., Geroldinger, S., Gierl-Mayer, C., & Dunkley, J. J. (2021). The masteralloy concept for sintered steels - new impetus for a classical approach. Advanced Engineering Forum, 42, 9–16. https://doi.org/10.4028/www.scientific.net/aef.42.9 ( reposiTUm)

Geroldinger, S., de Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2021). Applying the masteralloy concept for manufacturing of sinter hardening PM steel grades. Advanced Engineering Forum, 42, 17–23. https://doi.org/10.4028/www.scientific.net/aef.42.17 ( reposiTUm)

Danninger, H., de Oro Calderon, R., Geroldinger, S., & Gierl-Mayer, C. (2021). Heat treatment of sintered steels - advances in alloying techniques and systems. International Journal of Powder Metallurgy, 57(2), 49–58. http://hdl.handle.net/20.500.12708/137609 ( reposiTUm)

Geroldinger, S., de Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2021). Transient liquid phase sintering of PM steel - a matter of the heating rate. Metals, 11(10), 1662. https://doi.org/10.3390/met11101662 ( reposiTUm)

Ouda, K., Danninger, H., Gierl-Mayer, C., Hellein, R., & Müller, A. (2021). Ferrothermal reduction of iron(III)phosphate insulating layers in soft magnetic composites. Powder Metallurgy, 64(5), 351–359. https://doi.org/10.1080/00325899.2021.1909211 ( reposiTUm)

Mikl, G., Höfler, T., Gierl-Mayer, C., Danninger, H., Linder, B., & Angeli, G. (2021). Scaling Behaviour of Si-alloyed Steel Slabs under Reheating Conditions. Journal of Casting & Materials Engineering, 5(4), 71–74. https://doi.org/10.7494/jcme.2021.5.4.71 ( reposiTUm)

Mitterlehner, M., Danninger, H., Gierl-Mayer, C., Gschiel, H., & Hatzenbichler, M. (2021). Processability of moist superalloy powder by SLM. BHM Berg- Und Hüttenmännische Monatshefte, 166(1), 23–32. https://doi.org/10.1007/s00501-020-01065-z ( reposiTUm)

Mitterlehner, M., Danninger, H., Gierl-Mayer, C., Gschiel, H., Martinez, C., Tomisser, M., Schatz, M., Senck, S., Auer, J., & Benigni, C. (2021). Comparative Evaluation of Characterization Methods for Powders Used in Additive Manufacturing. Journal of Materials Engineering and Performance, 30(9), 7019–7034. https://doi.org/10.1007/s11665-021-06113-4 ( reposiTUm)

Kalss, G., Gierl-Mayer, C., Danninger, H., & Stetina, G. (2020). Sinter hardening of Cr-Mo pre-alloyed steels as a function of the carbon content. Powder Metallurgy Progress, 20(2), 81–93. https://doi.org/10.2478/pmp-2020-0008 ( reposiTUm)

Konegger, T., Gierl-Mayer, C., Sikora, A., Rojacz, H., Fafilek, G., Danninger, H., & Adam, K. (2020). Powder metallurgy manufacturing of iron aluminides with different aluminium contents and magnesium addition by reactive hot pressing. Powder Metallurgy Progress, 20(1), 41–55. https://doi.org/10.2478/pmp-2020-0005 ( reposiTUm)

Danninger, H. (2020). Powder Metallurgy in Austria. International Journal of Powder Metallurgy, 56(2), 25–29. http://hdl.handle.net/20.500.12708/140434 ( reposiTUm)

Mousapour, M., Azadbeh, M., Mohammadzadeh, A., & Danninger, H. (2020). On the deflection behaviour of prealloyed alpha brass during sintering: in-situ bending technique and modelling. Powder Metallurgy, 63(2), 134–141. https://doi.org/10.1080/00325899.2020.1731122 ( reposiTUm)

Mitterlehner, M., Danninger, H., Gierl-Mayer, C., Frank, J., & Tomischko, W. (2020). Study on The Inﬂuence of the Blade on Powder Layers Built in Powder Bed Fusion Processes for Additive Manufacturing. BHM Berg- Und Hüttenmännische Monatshefte, 165(3), 157–163. https://doi.org/10.1007/s00501-020-00955-6 ( reposiTUm)

Ghasemi, S., Azadbeh, M., Mousapour, M., Mohammadzadeh, A., Danninger, H., & Salimi, N. (2020). The role of pore evolution during supersolidus liquid phase sintering of prealloyed brass powder. Powder Metallurgy, 63(3), 187–196. https://doi.org/10.1080/00325899.2020.1785155 ( reposiTUm)

Gierl-Mayer, C., De Oro Calderon, R., & Danninger, H. (2019). Die Masteralloy-Route als attraktive Legierungsvariante für sinterhärtende Stähle. BHM Berg- und Hüttenmännische Monatshefte. https://doi.org/10.1007/s00501-019-0885-2 ( reposiTUm)

Höfler, T., Danninger, H., & Linder, B. (2019). Examination of Oxide Scales Formed During Hot Rolling of Steels. Praktische Metallographie, 56(7), 449–456. https://doi.org/10.3139/147.110585 ( reposiTUm)

Gierl-Mayer, C., De Oro Calderon, R., & Danninger, H. (2019). Sintering of ferrous metallic compacts: Chemical reactions that involve interstitial elements. Journal of the American Ceramic Society, 102(2), 695–705. https://doi.org/10.1111/jace.16039 ( reposiTUm)

Danninger, H., de Oro Calderon, R., & Gierl-Mayer, C. (2019). Alloy systems for heat treated sintered steels / Legierungssysteme für die Wärmebehandlung von Sinterstählen. HTM - Journal of Heat Treatment and Materials, 74(5), 282–292. https://doi.org/10.3139/105.110394 ( reposiTUm)

Namini, A. S., Azadbeh, M., Mohammadzadeh, A., Danninger, H., & Rezapasand, S. (2019). Relationship between pore coarsening and mass loss during supersolidus liquid phase sintering of alpha brass. Powder Metallurgy, 62(5), 331–339. https://doi.org/10.1080/00325899.2019.1665855 ( reposiTUm)

Danninger, H. (2019). Perspectives of powder metallurgy in the 2020s. Advanced Engineering Forum, 34, 18–27. https://doi.org/10.4028/www.scientific.net/aef.34.18 ( reposiTUm)

Ecker, J. V., Dobrezberger, K., Gonzalez-Gutierrez, J., Spoerk, M., Gierl-Mayer, C., & Danninger, H. (2019). Additive manufacturing of steel and copper using fused layer modelling: Material and process development. Powder Metallurgy Progress, 19(2), 63–81. https://doi.org/10.1515/pmp-2019-0007 ( reposiTUm)

Gierl-Mayer, C., Huemer, M.-C., Danninger, H., Dlapka, M., Stetina, G., & Ratzi, R. (2019). Supersolidus sintering of Cr prealloyed steels by inductive heating. Powder Metallurgy Progress, 19(2), 53–62. https://doi.org/10.1515/pmp-2019-0006 ( reposiTUm)

Gierl-Mayer, C., Stepan, T., Sun, J., & Danninger, H. (2019). Study on sintering of artificially oxidized steel compacts. Powder Metallurgy Progress, 19(1), 12–22. https://doi.org/10.1515/pmp-2019-0002 ( reposiTUm)

Oro, R., Jaliliziyaeian, M., Dunkley, J., Gierl-Mayer, C., & Danninger, H. (2018). New masteralloys for sintered high strength steels - the attractive route between mixing and prealloying. Izvestiya Vysshikh Uchebnykh Zavedenii. Poroshkovaya Metallurgiya i Funktsional’nye Pokrytiya, 4, 15–27. https://doi.org/10.17073/1997-308x-2018-4-15-27 ( reposiTUm)

Danninger, H., de Oro Calderon, R., & Gierl-Mayer, C. (2018). Die Chemie beim Sintern von pulvermetallurgischen Stählen. Giesserei-Praxis, 69(3), 14–20. http://hdl.handle.net/20.500.12708/144534 ( reposiTUm)

Danninger, H., Leitner, G., & Gierl-Mayer, Ch. (2018). STUDYING THE PROGRESS OF SINTERING IN FERROUS POWDER COMPACTS BY IN-SITU MEASURING THE THERMAL CONDUCTIVITY. Powder Metallurgy Progress, 18(2), 80–95. https://doi.org/10.1515/pmp-2018-0009 ( reposiTUm)

de Oro Calderon, R., Jaliliziyaeian, M., Dunkley, J., Gierl-Mayer, C., & Danninger, H. (2018). NEW CHANCES FOR THE MASTERALLOY APPROACH. Powder Metallurgy Progress, 18(2), 121–127. https://doi.org/10.1515/pmp-2018-0014 ( reposiTUm)

Danninger, H. (2018). WHAT WILL BE THE FUTURE OF POWDER METALLURGY? Powder Metallurgy Progress, 18(2), 70–79. https://doi.org/10.1515/pmp-2018-0008 ( reposiTUm)

Marschnigg, S., Gierl-Mayer, C., Danninger, H., Weirather, T., Granzer, T., & Zobl, P. (2018). Non-destructive measurement of the tungsten content in the binder phase of tungsten heavy alloys. International Journal of Refractory Metals and Hard Materials, 73, 215–220. https://doi.org/10.1016/j.ijrmhm.2018.02.005 ( reposiTUm)

Prieto, E., De Oro Calderon, R., Konegger, T., Gordo, E., Gierl-Mayer, C., Sheikh, S., Guo, S., Danninger, H., Milenkovic, S., & Alvaredo, P. (2018). Processing of a new high entropy alloy: AlCrFeMoNiTi. Powder Metallurgy, 61(3), 258–265. https://doi.org/10.1080/00325899.2018.1457862 ( reposiTUm)

Rouzegar, R., Azadbeh, M., & Danninger, H. (2018). High-temperature flow behaviour modelling of stress-strain curves of the sintered Cu-28Zn pre-alloyed powder compacts considering dynamic recrystallisation. Powder Metallurgy, 61(1), 36–42. https://doi.org/10.1080/00325899.2017.1377383 ( reposiTUm)

Ouda, K., Danninger, H., & Gierl-Mayer, C. (2018). Magnetic measurement of retained austenite in sintered steels - benefits and limitations. Powder Metallurgy, 61(5), 358–368. https://doi.org/10.1080/00325899.2018.1530850 ( reposiTUm)

Danninger, H., & Dlapka, M. (2018). Heat Treatment of Sintered Steels - what is different? / Wärmebehandlung von Sinterstahl - was ist anders? HTM - Journal of Heat Treatment and Materials, 73(3), 117–130. https://doi.org/10.3139/105.110353 ( reposiTUm)

Danninger, H., de Oro Calderon, R., & Gierl-Mayer, C. (2018). Chemical reactions during sintering of PM steel compacts as a function of the alloying route. Powder Metallurgy, 61(3), 241–250. https://doi.org/10.1080/00325899.2018.1458489 ( reposiTUm)

Lederer, M., Betzwar Kotas, A., Khatibi, G., & Danninger, H. (2018). Characterization of adhesion properties by delamination of ceramic-metal interfaces in four point bending. Key Engineering Materials, 774, 66–71. https://doi.org/10.4028/www.scientific.net/kem.774.66 ( reposiTUm)

Vassileva, V., Danninger, H., Strobl, S., Gierl-Mayer, C., De Oro Calderon, R., & Hutter, H. (2018). THE ROLE OF THE ATMOSPHERE ON BORON-ACTIVATED SINTERING OF FERROUS POWDER COMPACTS. Powder Metallurgy Progress, 18(1), 6–20. https://doi.org/10.1515/pmp-2018-0002 ( reposiTUm)

Danninger, H. (2018). Obituary – Andrej Šalak. Powder Metallurgy Progress, 18(1), 1–5. https://doi.org/10.1515/pmp-2018-0001 ( reposiTUm)

Mousapour, M., Azadbeh, M., & Danninger, H. (2017). Effect of compacting pressure on shape retention during supersolidus liquid phase sintering of Cu base alloys. Powder Metallurgy, 60(5), 393–403. https://doi.org/10.1080/00325899.2017.1357781 ( reposiTUm)

de Oro Calderon, R., Jaliliziyaeian, M., Gierl-Mayer, C., & Danninger, H. (2017). Effects of H2 Atmospheres on Sintering of Low Alloy Steels Containing Oxygen-Sensitive Masteralloys. JOM Journal of the Minerals, Metals and Materials Society, 69(4), 635–644. https://doi.org/10.1007/s11837-017-2287-9 ( reposiTUm)

Rouzegar, R., Azadbeh, M., & Danninger, H. (2017). Modelling the high temperature flow behaviour of sintered Cu-28Zn pre-alloyed powder compacts considering the effect of strain. Powder Metallurgy, 60(4), 273–279. https://doi.org/10.1080/00325899.2017.1286749 ( reposiTUm)

de Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2017). Effect of H2 atmospheres on sintering of steels containing oxidation-sensitive elements introduced through the master-alloy route. International Journal of Powder Metallurgy, 53(3), 31–40. http://hdl.handle.net/20.500.12708/146781 ( reposiTUm)

de Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2017). Master Alloys in Powder Metallurgy: the Challenge of Exploring New Alloying Compositions. Powder Metallurgy, 60(2), 86–96. https://doi.org/10.1080/00325899.2016.1269430 ( reposiTUm)

Edtmaier, C., Haubner, R., Zeiler, B., Danninger, H., & Ortner, H. (2017). Special Issue devoted to the 65th birthday of a.o.Univ. Prof. Dipl.-Ing. Dr.techn. Wolf-Dieter Schubert, Technische Universität Wien, Austria. International Journal of Refractory Metals and Hard Materials, 62, 85–86. https://doi.org/10.1016/j.ijrmhm.2016.07.018 ( reposiTUm)

Kotas, A. B., Danninger, H., Weiss, B., Mingard, K., Sanchez, J., & Llanes, L. (2017). Fatigue testing and properties of hardmetals in the gigacycle range. International Journal of Refractory Metals and Hard Materials, 62, 183–191. https://doi.org/10.1016/j.ijrmhm.2016.07.004 ( reposiTUm)

Delshadmanesh, M., Khatibi, G., Lederer, M., Zehetbauer, M., & Danninger, H. (2017). Influence of Defects on High Cycle Fatigue Response of Ti45Nb Biocompatible Alloy. Solid State Phenomena, 258, 337–340. https://doi.org/10.4028/www.scientific.net/ssp.258.337 ( reposiTUm)

Danninger, H., Vassileva, V., & Gierl-Mayer, C. (2017). Embrittling components in sintered steels: Comparison of phosphorus and boron. Powder Metallurgy Progress, 17(1), 47–64. https://doi.org/10.1515/pmp-2017-0006 ( reposiTUm)

Delshadmanesh, M., Khatibi, G., Ghomsheh, M. Z., Lederer, M., Zehetbauer, M., & Danninger, H. (2017). Influence of microstructure on fatigue of biocompatible β-phase Ti-45Nb. Materials Science and Engineering: A, 706, 83–94. https://doi.org/10.1016/j.msea.2017.08.098 ( reposiTUm)

De Oro Calderon, R., Bernardo, E., Campos, M., Gierl-Mayer, C., Danninger, H., & Torralba, J. M. (2016). Tailoring master alloys for liquid phase sintering: Effect of introducing oxidation-sensitive elements. Powder Metallurgy, 59(1), 31–40. https://doi.org/10.1080/00325899.2016.1148897 ( reposiTUm)

Danninger, H., Kotas, A. B., & Weiss, B. (2016). Ermüdung von Hartmetallen im Gigacycle-Bereich - Prüftechnik und Werkstoffverhalten. Keramische Zeitschrift, 68(2), 99–109. https://doi.org/10.1007/bf03400246 ( reposiTUm)

de Oro Calderon, R., Bernardo, E., Campos, M., Gierl-Mayer, C., Danninger, H., & Torralba, J. M. (2016). Master Alloys for liquid phase sintering: some key points for the design. Metal Powder Report, 71(3), 184–192. https://doi.org/10.1016/j.mprp.2016.03.004 ( reposiTUm)

Danninger, H., & Üregen, B. (2016). Phosphorus in sintered steels: Interaction of phosphorus with Mo. Powder Metallurgy Progress, 16(1), 14–26. https://doi.org/10.1515/pmp-2016-0002 ( reposiTUm)

Üregen, B., Gierl-Mayer, C., & Danninger, H. (2016). Phosphorus in sintered steels: Effect of phosphorus content and P carrier in sintered steel Fe-C-P. Powder Metallurgy Progress, 16(1), 1–13. https://doi.org/10.1515/pmp-2016-0001 ( reposiTUm)

Dlapka, M., Gierl-Mayer, C., Calderon, R. de O., Danninger, H., Bengtsson, S., & Dudrova, E. (2016). REACTION OF UNALLOYED AND Cr-Mo ALLOYED STEELS WITH NITROGEN FROM THE SINTERING ATMOSPHERE. Powder Metallurgy Progress, 16(2), 86–98. https://doi.org/10.1515/pmp-2016-0007 ( reposiTUm)

Mousapour, M., Azadbeh, M., & Danninger, H. (2016). Feasibility study of “elephant foot” phenomenon during liquid phase sintering of systems with volatile components. Powder Metallurgy, 59(5), 321–328. https://doi.org/10.1080/00325899.2016.1242526 ( reposiTUm)

De Oro Calderon, R., Bernardo, E., Campos, M., Gierl-Mayer, C., Danninger, H., & Torralba, J. M. (2016). Liquid Phases Tailored for Introducing Oxidation-Sensitive Elements through the Master Alloy Route. 粉体および粉末冶金 = Funtai Oyobi Funmatsuyakin = Journal of the Japan Society of Powder and Powder Metallurgy, 63(4), 172–184. https://doi.org/10.2497/jjspm.63.172 ( reposiTUm)

Gierl-Mayer, C., de Oro Calderon, R., & Danninger, H. (2016). The role of oxygen transfer in sintering of low alloy steel powder compacts: a review of the “internal getter” effect. JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 68(3), 920–927. https://doi.org/10.1007/s11837-016-1819-z ( reposiTUm)

de Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2016). Application of thermal analysis techniques to study the oxidation/reduction phenomena during sintering of steels containing oxygen-sensitive alloying elements. Journal of Thermal Analysis and Calorimetry, 217(1), 91–105. https://doi.org/10.1007/s10973-016-5508-5 ( reposiTUm)

Danninger, H. (2016). Obituary - Winfried J. Huppmann. Powder Metallurgy, 59(5), 301–301. https://doi.org/10.1080/00325899.2016.1234155 ( reposiTUm)

Gierl-Mayer, C., & Danninger, H. (2015). Dilatometry coupled with MS as instrument for process control in sintering of powder metallurgy steels. Powder Metall. Progress, 15(1), 3–12. http://hdl.handle.net/20.500.12708/150922 ( reposiTUm)

Vassileva, V., Krecar, D., Tomastik, C., Gierl-Mayer, C., Hutter, H., & Danninger, H. (2015). Phosphorus in sintered steels: Impact fracture behaviour of sintered Fe-P with varying P content. Powder Metall. Progress, 15(1), 36–49. http://hdl.handle.net/20.500.12708/150924 ( reposiTUm)

Azadbeh, M., Danninger, H., & Gierl-Mayer, C. (2015). The influence of first compaction on properties and microstructure of double pressed Cr-Mo prealloyed sintered steel. Powder Metall. Progress, 15(1), 13–22. http://hdl.handle.net/20.500.12708/150923 ( reposiTUm)

Danninger, H., & Hvizdos, P. (2015). Dr. Marcela Selecka retired. Powder Metall. Progress, 15(1), 55. http://hdl.handle.net/20.500.12708/150925 ( reposiTUm)

Gierl-Mayer, C., Danninger, H., de Oro Calderon, R., & Hryha, E. (2015). “Internal gettering” - metallothermic reduction processes in the early stage of sintering. International Journal of Powder Metallurgy, 51(3), 47–53. http://hdl.handle.net/20.500.12708/150999 ( reposiTUm)

Gschiel, H., Gierl-Mayer, C., Danninger, H., Larsson, P.-O., & Vidarsson, H. (2015). Manufacturing and microstructure of porous metal supports for a solid oxide fuel cell. Powder Metallurgy, 58(3), 178–181. http://hdl.handle.net/20.500.12708/150997 ( reposiTUm)

Mohammadzadeh, A., Azadbeh, M., & Danninger, H. (2015). New concept in analysis of supersolidus liquid phase sintering of alpha brass. Powder Metallurgy, 58(2), 123–132. https://doi.org/10.1179/1743290114y.0000000114 ( reposiTUm)

Oro, R., Campos, M., Gierl-Mayer, C., Danninger, H., & Torralba, J. M. (2015). New alloying systems for sintered steels: Critical aspects of sintering behaviour. Metallurgical and Materials Transactions A, 46(3), 1349–1359. https://doi.org/10.1007/s11661-014-2707-1 ( reposiTUm)

Gianessi, A., Gierl-Mayer, C., & Danninger, H. (2015). Bimodal particle reinforcement for wear resistant powder metallurgy steels. Materials Science Forum, 825–826, 1001–1008. https://doi.org/10.4028/www.scientific.net/msf.825-826.1001 ( reposiTUm)

Betzwar Kotas, A., Weiss, B., & Danninger, H. (2015). Gigacycle fatigue behaviour of sintered WC-Co hardmetals investigated by ultrasonic resonance testing. Materials Science Forum, 825–826, 1016–1023. https://doi.org/10.4028/www.scientific.net/msf.825-826.1016 ( reposiTUm)

Azadbeh, M., Mohammadzadeh, A., Danninger, H., & Gierl-Mayer, C. (2015). On the densification and elastic modulus of sintered Cr-Mo steels. Metallurgical and Materials Transactions B, 46(3), 1471–1483. https://doi.org/10.1007/s11663-015-0315-0 ( reposiTUm)

Auinger, M., Praig, V. G., Linder, B., & Danninger, H. (2015). Grain boundary oxidation in iron-based alloys, investigated by 18O enriched water vapour - The effect of mixed oxides in binary and ternary Fe-{Al. Cr, Mn, Si} systems. Corrosion Science, 96, 133–143. https://doi.org/10.1016/j.corsci.2015.04.009 ( reposiTUm)

Azadbeh, M., Danninger, H., Mohammadzadeh, A., & Gierl-Mayer, C. (2015). Macroscopic illustration of Zn evaporation during liquid phase sintering of Cu-28Zn prepared from prealloyed powder. Powder Metallurgy, 58(2), 91–94. https://doi.org/10.1179/0032589914z.000000000208 ( reposiTUm)

Danninger, H., & Torralba, J. M. (2015). Editorial. Powder Metallurgy, 58(1), 1–2. http://hdl.handle.net/20.500.12708/151032 ( reposiTUm)

Mohammadzadeh, A., Azadbeh, M., & Danninger, H. (2015). Microstructural coarsening during supersolidus liquid phase sintering of alpha brass. Powder Metallurgy, 58(4), 300–311. https://doi.org/10.1179/1743290115y.0000000013 ( reposiTUm)

Danninger, H., Weiss, B., Betzwar Kotas, A., Khatibi, G., Sohar, C., Dlapka, M., & Gierl-Mayer, C. (2015). Fatigue response and fractography of sintered materials. Powder Metallurgy Progress, 15(2), 218–233. http://hdl.handle.net/20.500.12708/151375 ( reposiTUm)

Azadbeh, M., Danninger, H., Gierl-Mayer, C., Khatibi, G., & Azadbeh, A. A. (2015). Improving the properties of sintered Al-Zn-Mg-Cu from mixed powder through synchronic effects of sintering and heat treatment. Powder Metallurgy Progress, 15(2), 202–217. http://hdl.handle.net/20.500.12708/151374 ( reposiTUm)

Azadbeh, M., Mohammadzadeh, A., & Danninger, H. (2014). Modeling the response of physical and mechanical properties of Cr-Mo prealloyed sintered steels to key manufacturing parameters. Materials & Design, 55, 633–643. https://doi.org/10.1016/j.matdes.2013.10.032 ( reposiTUm)

Gierl-Mayer, C., Jaliliziyaeian, M., Danninger, H., & Dudrova, E. (2014). Impact behaviour of sintered steels prepared from manganese prealloyed powders. Powder Metall. Progress, 14(2), 73–84. http://hdl.handle.net/20.500.12708/157092 ( reposiTUm)

Campos, M., Sicre-Artalejo, J. A., Torralba, J. M., Zbiral, J., Danninger, H., & Pena, P. (2014). Degradation of alumina refractory bricks by sintering Mn low-alloy steels. Ceramics International, 40(2), 3063–3070. https://doi.org/10.1016/j.ceramint.2013.09.140 ( reposiTUm)

Gierl-Mayer, C., Bauer, V., Limbeck, A., & Danninger, H. (2014). Analysis of PM-steels containing boron with laser ablation-inductively coupled plasma mass spectrometry. Powder Metallurgy Progress, 14(3), 129–136. http://hdl.handle.net/20.500.12708/157091 ( reposiTUm)

Danninger, H., Gierl-Mayer, C., & Jaliliziyaeian, M. (2014). Effect of phosphorus addition on the impact fracture behaviour of Cr-Mo prealloyed sintered steels. Powder Metallurgy Progress, 14(1), 11–23. http://hdl.handle.net/20.500.12708/157090 ( reposiTUm)

Danninger, H. (2014). Powder Metallurgy in Austria. INTERNATIONAL JOURNAL OF POWDER METALLURGY, 50(2), 45–49. http://hdl.handle.net/20.500.12708/156581 ( reposiTUm)

Auinger, M., Vogel, A., Praig, V. G., Danninger, H., & Rohwerder, M. (2014). Thermogravimetry and in-situ mass spectrometry at high temperature compared to thermochemical modelling - The weight loss during selective decarburisation at 800°C. Corrosion Science, 78, 188–192. https://doi.org/10.1016/j.corsci.2013.09.015 ( reposiTUm)

Lederer, M., Khatibi, G., Thuiner, D., & Danninger, H. (2013). Modeling of fatigue crack initiation in wire-bonds using a novel approach of strain gradient theory. Key Engineering Materials, 592–593, 246–249. https://doi.org/10.4028/www.scientific.net/kem.592-593.246 ( reposiTUm)

Hradil, K., Avakemian, A., Dlapka, M., Gierl-Mayer, Ch., & Danninger, H. (2013). Röntgenographische Analyse von Restaustenit-Gehalten an pulvermetallurgisch hergestellten Stählen. HTM Journal of Heat Treatment and Materials, 68(6), 267–273. https://doi.org/10.3139/105.110191 ( reposiTUm)

Dlapka, M., Gierl-Mayer, C., Strobl, S., Huemer, M.-C., & Danninger, H. (2013). Austenitkornstabilität in pulvermetallurgischen Stählen bei hohen Sinter- und Wärmebehandlungstemperaturen. HTM Journal of Heat Treatment and Materials, 68(4), 188–195. https://doi.org/10.3139/105.110193 ( reposiTUm)

Klammer, E., Dlapka, M., Gierl-Mayer, C., & Danninger, H. (2013). Trockenlauf-Gleitverschleiß von sintergehärteten Stählen. HTM Journal of Heat Treatment and Materials, 68(3), 142–149. https://doi.org/10.3139/105.110189 ( reposiTUm)

Dadal, E., Gierl-Mayer, C., Danninger, H., Sencekova, L., Izdinsky, K., & Simancik, F. (2013). Powder metallurgy manufacturing of porous molybdenum preforms for Si infiltration. Powder Metallurgy Progress, 13(3–4), 93–102. http://hdl.handle.net/20.500.12708/156900 ( reposiTUm)

Azadbeh, M., Danninger, H., & Gierl-Mayer, C. (2013). Particle rearrangement during liquid phase sintering of Cu-20Zn and Cu-10Sn-10Pb prepared from prealloyed powder. Powder Metallurgy, 56(5), 342–346. https://doi.org/10.1179/0032589913z.000000000138 ( reposiTUm)

Garcia, L. F., Danninger, H., & Ponemayr, H. (2013). Laser cladding of low alloy steel substrates with carbon-free tool steels Fe-Co-Mo/W. Powder Metallurgy Progress, 13(1), 11–21. http://hdl.handle.net/20.500.12708/155758 ( reposiTUm)

Zikin, A., Badisch, E., Hussainova, I., Tomastik, C., & Danninger, H. (2013). Characterization of TiC-NiMo reinforced Ni-based hardfacing. Surface and Coatings Technology, 236, 36–44. https://doi.org/10.1016/j.surfcoat.2013.02.027 ( reposiTUm)

Danninger, H., Rouzbahani, F., Harold, C., Ponemayr, H., Daxelmüller, M., Simancik, F., & Izdinsky, K. (2013). Powder metallurgy carbon free tool steels Fe-Co-Mo with varying Co and Mo contents. Powder Metallurgy Progress, 13(2), 47–56. http://hdl.handle.net/20.500.12708/156413 ( reposiTUm)

Dlapka, M., Danninger, H., Gierl, C., & Lindqvist, B. (2012). Sinterhärten - eine spezielle Wärmebehandlung für pulvermetallurgische Präzisionsteile. HTM Journal of Heat Treatment and Materials, 67(3), 223–231. https://doi.org/10.3139/105.110147 ( reposiTUm)

Mohsin, I. U., Gierl, C., Danninger, H., & Ata, S. (2012). Thermal debinding study of powder injection moulded Fe + 12%Cu using TG/MS. Powder Metallurgy, 55(2), 118–123. https://doi.org/10.1179/1743290111y.0000000023 ( reposiTUm)

Dlapka, M., Danninger, H., & Gierl, C. (2012). Factors influencing austenite grain size in sinter-hardened low alloy steels. International Journal of Powder Metallurgy, 48(4), 45–54. http://hdl.handle.net/20.500.12708/163778 ( reposiTUm)

Momeni, M., Gierl, C., Danninger, H., Mohsin, I. U., & Arvand, A. (2012). Sintering of Fe-C-BN steel compacts in different atmospheres studied by dilatometry and DTA/TG. Powder Metallurgy, 55(3), 212–221. https://doi.org/10.1179/1743290111y.0000000011 ( reposiTUm)

Mohsin, I. U., Lager, D., Hohenauer, W., Ata, S., Gierl, C., & Danninger, H. (2012). Finite element investigation of backbone binder removal from MIM copper compact. Powder Metallurgy, 55(5), 333–339. https://doi.org/10.1179/1743290112y.0000000009 ( reposiTUm)

Dlapka, M., Danninger, H., Gierl, C., Altena, H., Stetina, G., & Orth, P. (2012). Niederdruckaufkohlung von chromhaltigen Sinterstählen für Zahnräder. HTM Journal of Heat Treatment and Materials, 67(2), 158–165. https://doi.org/10.3139/105.110146 ( reposiTUm)

Dlapka, M., Danninger, H., Gierl, C., Klammer, E., Weiss, B., Khatibi, G., & Betzwar-Kotas, A. (2012). Fatigue behavior and wear resistance of sinter-hardening steels. International Journal of Powder Metallurgy, 48(5), 49–60. http://hdl.handle.net/20.500.12708/163970 ( reposiTUm)

Gierl, C., Danninger, H., Avakemian, A., Synek, J., Sattler, J., Zlatkov, B. S., ter Maat, J., Arzl, A., & Neubing, H. C. (2012). Carbon removal as a crucial parameter in the Powder Injection Moulding of aluminium alloys. Powder Injection Moulding International, 6(4), 65–71. http://hdl.handle.net/20.500.12708/164397 ( reposiTUm)

Momeni, M., Gierl, C., Danninger, H., & Avakemian, A. (2012). Thermoanalytical sintering studies of Fe-C admixed with ferroboron performed in different atmospheres. Powder Metallurgy, 55(1), 54–64. https://doi.org/10.1179/1743290111y.0000000020 ( reposiTUm)

Danninger, H., Xu, C., Gierl, C., Avakemian, A., & Huemer, M.-C. (2012). In-situ characterization of the sintering process through process-temperature control rings. Powder Metallurgy Progress, 12(3), 168–180. http://hdl.handle.net/20.500.12708/165017 ( reposiTUm)

Danninger, H., Xu, C., Khatibi, G., Weiss, B., & Lindqvist, B. (2012). Gigacycle fatigue of ultra high density sintered alloy steels. Powder Metallurgy, 55(5), 378–387. https://doi.org/10.1179/1743290112y.0000000001 ( reposiTUm)

Kuzmanovic, J., Danninger, H., Gierl, C., Zbiral, J., Halwax, E., & Zikin, A. (2012). Preparation and properties of sintered Fe and Ni based MMCs reinforced with fused tungsten carbide particles. Powder Metallurgy Progress, 12(2), 84–97. http://hdl.handle.net/20.500.12708/164422 ( reposiTUm)

Danninger, H., Gelbmann, G., & Straffelini, G. (2012). Impact response of Mo prealloyed sintered steels determined by instrumented testing. Powder Metallurgy Progress, 12(2), 53–70. http://hdl.handle.net/20.500.12708/164421 ( reposiTUm)

Momeni, M., Gierl, C., & Danninger, H. (2011). Study of the oxide reduction and interstitial contents during sintering of different plain carbon steels by in situ mass spectrometry in nitrogen atmosphere. Materials Chemistry and Physics: Including Materials Science Communications, 129(1–2), 209–216. https://doi.org/10.1016/j.matchemphys.2011.03.076 ( reposiTUm)

Montealegre Melendez, I., Neubauer, E., Angerer, P., Danninger, H., & Torralba, J. M. (2011). Influence of nano-reinforcements on the mechanical properties and microstructure of titanium matrix composites. Composites Science and Technology, 71(8), 1154–1162. https://doi.org/10.1016/j.compscitech.2011.04.005 ( reposiTUm)

Mohsin, I. U., Gierl, C., & Danninger, H. (2011). Sintering study of injection molded W-8%Ni-2%Cu compacts from mixed powders by thermoanalytical techniques. International Journal of Refractory Metals and Hard Materials, 29(4), 532–537. https://doi.org/10.1016/j.ijrmhm.2011.03.006 ( reposiTUm)

Danninger, H., Jaliliziyaeian, M., Gierl Mayer, C., & Bengtsson, S. (2011). Chemical reactions during sintering of Mn and Mn-Cr prealloyed steels in inert versus reducing atmospheres. Materials Science Forum, 672, 203–206. https://doi.org/10.4028/www.scientific.net/msf.672.203 ( reposiTUm)

Kahofer, S., Zehetbauer, M., Danninger, H., Schafler, E., Kerber, M., & Horky, J. (2011). Nanocrystallization and dissolution of immiscible powder alloys using high pressure torsion. Materials Science Forum, 667–669, 151–156. https://doi.org/10.4028/www.scientific.net/msf.667-669.151 ( reposiTUm)

Danninger, H., Sohar, C., Gierl Mayer, C., Betzwar-Kotas, A., & Weiss, B. (2011). Gigacycle fatigue response of PM versus ingot metallurgy tool steels. Materials Science Forum, 672, 23–30. https://doi.org/10.4028/www.scientific.net/msf.672.23 ( reposiTUm)

Danninger, H., Gierl, C., Mühlbauer, G., Silva Gonzalez, M., Schmidt, J., & Specht, E. (2011). Thermophysical properties of sintered steels: Effect of porosity. International Journal of Powder Metallurgy, 47(3), 31–42. http://hdl.handle.net/20.500.12708/161909 ( reposiTUm)

Ul Mohsin, I., Lager, D., Gierl, C., Hohenauer, W., & Danninger, H. (2011). Simulation and optimisation for thermal debinding of copper MIM parts using thermokinetic analysis. Powder Metallurgy, 54(1), 30–35. https://doi.org/10.1179/003258910x12740974839620 ( reposiTUm)

Dlapka, M., Danninger, H., Gierl, C., Weiss, B., Khatibi, G., & Betzwar-Kotas, A. (2011). Critical defects in different sinter hardening grade steels tested under gigacycle fatigue loading. Powder Metall. Progress, 11(1–2), 69–77. http://hdl.handle.net/20.500.12708/162438 ( reposiTUm)

Momeni, M., Danninger, H., Gierl, C., Dudrova, E., & Arvand, A. (2011). Relationship bertween tensile toughness and impact energy of Mo prealloyed and Ni-Cu-Mo diffusion bonded sintered steels. Powder Metall. Progress, 11(1–2), 62–68. http://hdl.handle.net/20.500.12708/162437 ( reposiTUm)

Gierl, C., Harrer, B., Danninger, H., Kastner, J., & Schneider, R. (2011). X-ray computed tomography for quantification of secondary pore structures im PM steels. Powder Metall. Progress, 11(1–2), 85–89. http://hdl.handle.net/20.500.12708/162439 ( reposiTUm)

Holzweber, M., Kriegl, M., Schintlmeister, A., Paesold, D., Danninger, H., & Hutter, H. (2011). Oxygen diffusion in grain boundaries: a ToF-SIMS investigation on hot-rolled steel sheets. Analytical and Bioanalytical Chemistry, 400(3), 659–663. https://doi.org/10.1007/s00216-011-4769-x ( reposiTUm)

Danninger, H., Avakemian, A., & Gierl, C. (2011). Fracture morphology of green cracks in sintered PM steels. Powder Metallurgy Progress, 11(1–2), 3–11. http://hdl.handle.net/20.500.12708/162436 ( reposiTUm)

Montealegre Meléndez, I., Neubauer, E., & Danninger, H. (2010). Consolidation of titanium matrix composites to maximum density by different hot pressing techniques. Materials Science and Engineering: A, 527(16–17), 4466–4473. https://doi.org/10.1016/j.msea.2010.03.093 ( reposiTUm)

Mohsin, I. U., Lager, D., Gierl, C., Hohenauer, W., & Danninger, H. (2010). Thermo-kinetics study of MIM thernal de-binding using TGA coupled with FTIR and mass spectrometry. Thermochimica Acta, 503–504, 40–45. https://doi.org/10.1016/j.tca.2010.03.005 ( reposiTUm)

Sohar, C., Betzwar-Kotas, A., Gierl, C., Danninger, H., & Weiss, B. (2010). Gigacycle fatigue response of tool steels produced by powder metallurgy compared to ingot metallurgy tool steels. International Journal of Materials Research, 101(9), 1140–1150. https://doi.org/10.3139/146.110395 ( reposiTUm)

Hryha, E., Gierl, C., Nyborg, L., Danninger, H., & Dudrova, E. (2010). Surface composition of the steel powders pre-alloyed with manganese. Applied Surface Science, 256(12), 3946–3961. https://doi.org/10.1016/j.apsusc.2010.01.055 ( reposiTUm)

Dlapka, M., Strobl, S., Danninger, H., & Gierl, C. (2010). Austenitkorngröße in sintergehärteten pulvermetallurgischen Stählen. Praktische Metallographie, 47(12), 686–699. https://doi.org/10.3139/147.110099 ( reposiTUm)

Dlapka, M., Danninger, H., Gierl, C., & Lindqvist, B. (2010). Sinter hardening Cr-Mo prealloyed steels with sufficient toughness. Powder Metallurgy Progress, 10(1), 20–31. http://hdl.handle.net/20.500.12708/168177 ( reposiTUm)

Zlatkov, B. S., Mitrović, N. S., Nikolić, M. V., Maričić, A. M., Danninger, H., Aleksić, O. S., & Halwax, E. (2010). Properties of MnZn ferrites prepared by powder injection molding technology. MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS, 175(3), 217–222. https://doi.org/10.1016/j.mseb.2010.07.031 ( reposiTUm)

Danninger, H., Harold, C., Gierl, C., Ponemayr, H., Daxelmüller, M., Simancik, F., & Izdinsky, K. (2010). Powder metallurgy manufacturing of carbon-free precipitation-hardened high speed steels. Acta Physica Polonica A, 117(5), 825–830. http://hdl.handle.net/20.500.12708/167105 ( reposiTUm)

Dlapka, M., Danninger, H., Gierl, C., & Lindqvist, B. (2010). Defining the pores in PM components. Metal Powder Report, 65(2), 30–33. http://hdl.handle.net/20.500.12708/166820 ( reposiTUm)

Danninger, H., Garmendia Gutierrez, J. M., Ratzi, R., & Seyrkammer, J. (2010). Reactive sinter brazing of ferrous PM parts using iron-carbon fillers. Powder Metallurgy Progress, 10(3), 121–132. http://hdl.handle.net/20.500.12708/168198 ( reposiTUm)

Montealegre Melendez, I., Neubauer, E., & Danninger, H. (2009). Effect of starting powder grade on sintering and properties of PM titanium metal matrix composites. Powder Metallurgy, 52(4), 322–328. https://doi.org/10.1179/174329009x457117 ( reposiTUm)

Zlatkov, B. S., Bavdek, U., Nikolic, M. V., Aleksic, O. S., Danninger, H., Gierl, C., & Erman, A. (2009). Magnetic properties of alnico8 sintered magnets produced by powder injection moulding. Powder Injection Moulding International, 3(3), 58–63. http://hdl.handle.net/20.500.12708/165760 ( reposiTUm)

Sohar, C., Betzwar-Kotas, A., Gierl, C., Weiss, B., & Danninger, H. (2009). Fatigue behaviour of M2 and M42 high speed steel up to the gigacycle regime. Kovove Materialy - Metallic Materials, 47(3), 147–158. http://hdl.handle.net/20.500.12708/165700 ( reposiTUm)

Zlatkov, B. S., Nikolic, M. V., Aleksic, O., Danninger, H., & Halwax, E. (2009). A study of magneto-crystalline alignment in sintered barium hexaferrite fabricated by powder injection molding. Journal of Magnetism and Magnetic Materials, 321(4), 330–335. https://doi.org/10.1016/j.jmmm.2008.09.014 ( reposiTUm)

Sohar, C., Betzwar-Kotas, A., Gierl, C., Weiss, B., & Danninger, H. (2009). PM tool steels push the edge in fatigue tests. Metal Powder Report, 64(2), 12–17. http://hdl.handle.net/20.500.12708/165277 ( reposiTUm)

Zlatkov, B. S., Nikolic, M. V., Danninger, H., & Aleksic, O. S. (2009). Sintered Ba hexaferrite shaped by powder injection moulding in a DC magnetic field. Powder Injection Moulding International, 3(1), 50–55. http://hdl.handle.net/20.500.12708/165272 ( reposiTUm)

Danninger, H., Harold, C., Rouzbahani, F., Ponemayr, H., Daxelmüller, M., Simancik, F., & Izdinsky, K. (2009). Particle-reinforced carbon-free precipitation-hardening high speed steels. International Journal of Powder Metallurgy, 45(6), 27–35. http://hdl.handle.net/20.500.12708/166240 ( reposiTUm)

Winkelmann, H., Badisch, E., Kirchgaßner, M., & Danninger, H. (2009). Wear mechanisms at high temperatures. Part 1: Wear mechanisms of different Fe-based alloys at elevated temperatures. Tribology Letters, 34(3), 155–166. https://doi.org/10.1007/s11249-009-9421-y ( reposiTUm)

Winkelmann, H., Varga, M., Badisch, E., & Danninger, H. (2009). Wear mechanisms at high temperatures: Part 2: Temperature effect on wear mechanisms in the erosion test. Tribology Letters, 34(3), 167–175. https://doi.org/10.1007/s11249-009-9425-7 ( reposiTUm)

Winkelmann, H., Badisch, E., Roy, M., & Danninger, H. (2009). Corrosion mechanisms in the wood industry, especially caused by tannins. Materials and Corrosion, 60(1), 40–48. https://doi.org/10.1002/maco.200805016 ( reposiTUm)

Dlapka, M., Gierl, C., Danninger, H., Altena, H., Orth, P., & Stetina, G. (2009). Niederdruckaufkohlung von Sinterstahl-Präzisionsteilen mit gradierter Porosität. BHM Berg- Und Hüttenmännische Monatshefte, 154(5), 200–204. http://hdl.handle.net/20.500.12708/165522 ( reposiTUm)

Milos, K., Danninger, H., Jangg, G., & Degischer, H.-P. (2009). Mechanical properties and dry sliding wear behaviour of extruded Al-Al2O3 PM composites. Powder Metallurgy Progress, 9(4), 191–204. http://hdl.handle.net/20.500.12708/167224 ( reposiTUm)

Gierl, C., Jaliliziyaeian, M., Danninger, H., Vasilko, K., & Salak, A. (2009). Comparison of CaS and MnS as machining aids in sintered steels. Powder Metallurgy Progress, 9(2), 67–78. http://hdl.handle.net/20.500.12708/167304 ( reposiTUm)

Danninger, H., Gierl, C., & Salak, A. (2009). Relationship between apparent hardness and tensile strength in PM iron and steels sintered at standard temperatures. Powder Metallurgy Progress, 9(1), 1–13. http://hdl.handle.net/20.500.12708/166336 ( reposiTUm)

Sohar, C., Betzwar-Kotas, A., Gierl, C., Weiss, B., & Danninger, H. (2008). Gigacycle fatigue behaviour of a high chromium alloyed cold work tool steel. International Journal of Fatigue, 30(7), 1137–1149. https://doi.org/10.1016/j.ijfatigue.2007.09.012 ( reposiTUm)

Salak, A., Selecka, M., Vasilko, K., & Danninger, H. (2008). Face turning of PM steels: Effect of porosity and carbon level. International Journal of Powder Metallurgy, 44(2), 49–61. http://hdl.handle.net/20.500.12708/169591 ( reposiTUm)

Danninger, H., & Gierl, C. (2008). New Alloying Systems for Ferrous Powder Metallurgy Precision Parts. Science of Sintering, 40(1), 33–46. https://doi.org/10.2298/sos0801031d ( reposiTUm)

Sohar, C. R., Betzwar-Kotas, A., Gierl, C., Weiss, B., & Danninger, H. (2008). Influence of surface residual stresses on gigacycle fatigue response of high chromium cold work tool steel. Materials Science & Engineering Technology, 39(3), 248–257. https://doi.org/10.1002/mawe.200700216 ( reposiTUm)

Zlatkov, B. S., Griesmayer, E., Loibl, H., Aleksic, O. S., Danninger, H., Gierl, C., & Lukic, L. S. (2008). Recent advances in CIM technology. Science of Sintering, 40(2), 185–195. https://doi.org/10.2298/sos0802185z ( reposiTUm)

Sohar, C., Betzwar-Kotas, A., Gierl, C., Weiss, B., & Danninger, H. (2008). Anisotropy effects on gigagcycle fatigue behaviour of high Cr alloyed cold work tool steel. Kovove Materialy - Metallic Materials, 46, 197–207. http://hdl.handle.net/20.500.12708/170326 ( reposiTUm)

Schubert, W.-D., Lassner, E., & Danninger, H. (2008). Tungsten in Steel. ITIA Newsletter, DECEMBER, 2–11. http://hdl.handle.net/20.500.12708/171199 ( reposiTUm)

Sohar, C., Betzwar-Kotas, A., Gierl, C., Weiss, B., & Danninger, H. (2008). Gigacycle fatigue fractography of cold work tool steels produced by PM compared to ingot metallurgy. Powder Metall. Progress, 8(3), 190–195. http://hdl.handle.net/20.500.12708/171236 ( reposiTUm)

Jaliliziyaeian, M., Gierl, C., Danninger, H., & Dudrova, E. (2008). Fracture surfaces studied on PM steels prepared from prealloyed steel powders and sintered in different atmospheres. Powder Metall. Progress, 8(2), 128–134. http://hdl.handle.net/20.500.12708/171238 ( reposiTUm)

Sicre Artalejo, J. A., Campos Gomez, M., Torralba, J. M., Zbiral, J., Danninger, H., & Pena Castro, P. (2008). Estudio de la degradacion de elementos refractarios de alumina en la sinterizacion de aceros modificados con Mn. Boletin de La Sociedad Espanola de Ceramica y Vidrio, 47(5), 305–310. http://hdl.handle.net/20.500.12708/171358 ( reposiTUm)

Zlatkov, B. S., Griesmayer, E., Loibl, H., Aleksic, O. S., Danninger, H., Gierl, C., & Lukic, L. S. (2008). Recent Advances in PIM Technology I. Science of Sintering, 40(1), 79–88. https://doi.org/10.2298/sos0801077z ( reposiTUm)

Sohar, C., Betzwar-Kotas, A., Gierl, C., Weiss, B., & Danninger, H. (2008). Fractographic evaluation of gigacycle fatigue crack nucleation and propagation of a high Cr alloyed cold work tool steel. International Journal of Fatigue, 30(12), 2191–2199. https://doi.org/10.1016/j.ijfatigue.2008.05.013 ( reposiTUm)

Zlatkov, B. S., Danninger, H., & Aleksic, O. S. (2008). Cooling performance of tube X-COOLER shaped by MIM technology. Powder Injection Moulding International, 2(3), 64–68. http://hdl.handle.net/20.500.12708/170136 ( reposiTUm)

Momeni, M., Gierl, C., & Danninger, H. (2008). Ratio tensile strength - Vickers hardness in sintered steels as a function of the sintering temperatures. Powder Metall. Progress, 8(3), 183–189. http://hdl.handle.net/20.500.12708/171240 ( reposiTUm)

Gierl, C., Ul Mohsin, I., & Danninger, H. (2008). Boron activated sintering of PM steels - alternative boron sources. Powder Metall. Progress, 8(2), 135–141. http://hdl.handle.net/20.500.12708/171237 ( reposiTUm)

Azadbeh, M., Danninger, H., & Gierl, C. (2008). Study on the interparticle bonding of double pressed PM alloy steels. Powder Metallurgy Progress, 8(2), 83–90. http://hdl.handle.net/20.500.12708/171239 ( reposiTUm)

Danninger, H., & Gierl, C. (2007). Powder metallurgy steels for highly loaded precision parts. International Journal of Materials and Product Technology, 28(3/4), 338–360. http://hdl.handle.net/20.500.12708/169301 ( reposiTUm)

Xu, C., Danninger, H., Khatibi, G., & Weiss, B. (2007). Gigacycle fatigue crack initiation in Cr-Mo prealloy sintered steel. Materials Science Forum, 534–536, 685–688. http://hdl.handle.net/20.500.12708/169285 ( reposiTUm)

Danninger, H., Xu, C., & Lindqvist, B. (2007). Oxygen removal during sintering of steels prepared from Cr-Mo and Mo prealloyed powders. Materials Science Forum, 534–536, 577–580. http://hdl.handle.net/20.500.12708/169287 ( reposiTUm)

Shahmohammadi, M., Simchi, A., Danninger, H., & Arvand, A. (2007). An investigation on the sintering behaviour of high strength Al-Zn-Mg-Cu alloy prepared from elemental powders. Materials Science Forum, 534–536, 489–492. http://hdl.handle.net/20.500.12708/169288 ( reposiTUm)

Xu, C., Danninger, H., Khatibi, G., & Weiss, B. (2007). Gigacycle fatigue endurance strength of high density Mo and Cr-Mo prealloyed sintered steels. Materials Science Forum, 534–536, 689–692. http://hdl.handle.net/20.500.12708/169286 ( reposiTUm)

Liersch, A., Danninger, H., Gierl, C., & Ratzi, R. (2007). The role of admixed hexagonal boron nitride in sintered steels: 1. Effect on sintering and microstructure. Powder Metallurgy Progress, 7(1), 1–11. http://hdl.handle.net/20.500.12708/169413 ( reposiTUm)

Azadbeh, M., Danninger, H., & Gierl, C. (2007). As-repressed properties of double compacted Cr-Mo and Mo prealloyed PM steels. Metal Powder Report, 7(3), 128–138. http://hdl.handle.net/20.500.12708/169569 ( reposiTUm)

Liersch, A., Danninger, H., & Ratzi, R. (2007). The role of admixed hexagonal boron nitride in sintered steels: 2. Effect on sliding wear and machinability. Powder Metallurgy Progress, 7(2), 66–79. http://hdl.handle.net/20.500.12708/169558 ( reposiTUm)

Liersch, A., Danninger, H., & Ratzi, R. (2007). The role of admixed hexagonal boron nitride in sintered steels: 3. hBN in differently sintered alloy steels. Powder Metallurgy Progress, 7(3), 149–163. http://hdl.handle.net/20.500.12708/169568 ( reposiTUm)

Salak, A., Vasilko, K., Selecka, M., & Danninger, H. (2006). New short time face turning method for testing the machinability of PM steels. Journal of Materials Processing Technology, 176, 62–69. http://hdl.handle.net/20.500.12708/173137 ( reposiTUm)

Schubert, W.-D., Haubner, R., Danninger, H., Zeiler, B., Lassner, E., & Ortner, H. (2006). Editorial, Special Issue devoted to the 75th birthday of Em.O.Univ. Prof. Dipl.-Ing. Dr.techn. Benno LUX. International Journal of Refractory Metals and Hard Materials, 24, 351–352. http://hdl.handle.net/20.500.12708/173171 ( reposiTUm)

Azadbeh, M., Gierl, C., & Danninger, H. (2006). Elastic properties of Cr-Mo alloyed sintered steels: a comparison of dynamic and static Young’s moduli. Powder Metallurgy Progress, 6(1), 1–10. http://hdl.handle.net/20.500.12708/173202 ( reposiTUm)

Romanov, G. N., Tarasov, P. P., D´yachkovskiy, P. K., Savitskij, A. P., & Danninger, H. (2006). Dilatometric study on liquid phase sintering of Al-Ni powder compacts. Powder Metallurgy Progress, 6(3), 128–136. http://hdl.handle.net/20.500.12708/173302 ( reposiTUm)

Krecar, D., Zwanziger, J., Vassileva, V., Danninger, H., & Hutter, H. (2005). 2D and 3D SIMS investigations on sintered steels. Applied Surface Science, 252(1), 282–285. http://hdl.handle.net/20.500.12708/172888 ( reposiTUm)

Danninger, H., Pöttschacher, R., Bradac, S., Salak, A., & Seyrkammer, J. (2005). Comparison of Mn, Cr and Mo alloyed sintered steels prepared from elemental powders. Powder Metallurgy, 48(1), 23–32. http://hdl.handle.net/20.500.12708/172860 ( reposiTUm)

Danninger, H., Rouzbahani, F., Harold, C., Ponemayr, H., Daxelmüller, M., Simancik, F., & Izdinsky, K. (2005). Heat treatment and properties of precipitation hardened carbon-free PM tool steels. Powder Metall. Progress, 5(2), 92–103. http://hdl.handle.net/20.500.12708/173021 ( reposiTUm)

Altena, H., & Danninger, H. (2005). Wärmebehandlung von Sinterstahl-Präzisionsteilen: II. Prozess- und Anlagentechnik. Berg- Und Hüttenmännische Monatshefte, 150(5), 170–175. http://hdl.handle.net/20.500.12708/172859 ( reposiTUm)

Danninger, H., & Altena, H. (2005). Wärmebehandlung von Sinterstahl-Präzisionsteilen Teil 1: Grundlagen. BHM Berg- Und Hüttenmännische Monatshefte, 150(3), 77–81. http://hdl.handle.net/20.500.12708/172842 ( reposiTUm)

Danninger, H., Wang, Y., Wolfsgruber, E., & Seyrkammer, J. (2005). Reactive sinter brazing of PM aluminium to sintered and wrought steels. 2. Application to Al camshaft belt pulleys. Powder Metallurgy Progress, 5(4), 211–219. http://hdl.handle.net/20.500.12708/173086 ( reposiTUm)

Danninger, H., Wang, Y., Wolfsgruber, E., & Seyrkammer, J. (2005). Reactive sinter brazing of PM aluminium to sintered and wrought steels. 1. Filler selection and processing. Powder Metallurgy Progress, 5(4), 199–210. http://hdl.handle.net/20.500.12708/173085 ( reposiTUm)

Salak, A., Vasilko, K., Selecka, M., Danninger, H., Jakubeczyova, D., & Faberova, M. (2005). Effect of cutting speed and tool grade on machinability of PM steels determined by face turning method. Powder Metall. Progress, 5(2), 104–114. http://hdl.handle.net/20.500.12708/173022 ( reposiTUm)

Simchi, A., & Danninger, H. (2005). Electrical conductivity - a nondestructive tool for assessing the mechanical properties of sintered steels. Powder Metallurgy Progress, 5(2), 115–122. http://hdl.handle.net/20.500.12708/173024 ( reposiTUm)

Liersch, A., Danninger, H., & Ratzi, R. (2004). The influence of admixed inorganic additives on properties and machinability of sintered plain iron and steels. Powder Metall. Progress, 4(4), 192–203. http://hdl.handle.net/20.500.12708/174661 ( reposiTUm)

Danninger, H., & Weiss, B. (2003). The influence of defects on high-cycle fatigue of metallic materials. Journal of Materials Processing Technology, 143–144, 179–184. http://hdl.handle.net/20.500.12708/174649 ( reposiTUm)

Danninger, H. (2003). Asymmetrical ferrite-austenite transformation during vacuum sintering of plain iron compacts. Powder Metall. Progress, 3(2), 75–85. http://hdl.handle.net/20.500.12708/174767 ( reposiTUm)

Danninger, H., Gierl, C., Kremel, S., Leitner, G., Jaenicke-Rößler, K., & Yu, Y. (2002). Degassing and deoxidation processes during sintering of unalloyed and alloyed PM steels. Powder Metall. Progress, 2(3), 125–140. http://hdl.handle.net/20.500.12708/174634 ( reposiTUm)

Wang, J., & Danninger, H. (2001). Factors influencing the wear behaviour of sintered steels. Acta Metallurgica Sinica (English Letters), 14(1), 33–41. http://hdl.handle.net/20.500.12708/175510 ( reposiTUm)

Salak, A., Selecka, M., & Danninger, H. (2001). Pack boriding of sintered steels in presence of manganese in powder mix. International Journal of Powder Metallurgy, 37(4), 53–60. http://hdl.handle.net/20.500.12708/175508 ( reposiTUm)

Danninger, H., & Weiss, B. (2001). Ultra high cycle fatigue properties of sintered steels. Powder Metall. Progress, 1(1), 19–40. http://hdl.handle.net/20.500.12708/175507 ( reposiTUm)

Simchi, A., & Danninger, H. (2000). Electrical conductivity and microstructure of sintered ferrous materials: sintered iron. Powder Metallurgy, 43(3), 209–218. http://hdl.handle.net/20.500.12708/175503 ( reposiTUm)

Slesar, M., Dudrova, E., & Danninger, H. (2000). Fractographically determined microstructural parameters of sintered metallic materials. Kovove Materialy - Metallic Materials, 38(6), 389–399. http://hdl.handle.net/20.500.12708/175506 ( reposiTUm)

Wang, J., & Danninger, H. (1998). Dry sliding wear behaviour of molybdenum alloyed sintered steels. Wear, 222, 49–56. http://hdl.handle.net/20.500.12708/175509 ( reposiTUm)

Danninger, H., Spoljaric, D., & Weiss, B. (1997). Microstructural features limiting the performance of PM structural steels. International Journal of Powder Metallurgy, 33(4), 43–53. http://hdl.handle.net/20.500.12708/175505 ( reposiTUm)

Jangg, G., Danninger, H., Schröder, K., Abhari, K., Seyrkammer, J., & Neubing, H. C. (1996). PM aluminum camshaft belt pulleys for automotive engines. Materials Science & Engineering Technology, 27, 179–189. http://hdl.handle.net/20.500.12708/175504 ( reposiTUm)

Conference Proceedings Contributions

Danninger, H., De Oro Calderon, R., & Gierl-Mayer, C. (2024). Multiple alloying variants – a special feature of powder metallurgy. In Abstract Book : ISNNM-2024: The 18th International Symposium on Novel and Nano Materials (pp. 63–63). ( reposiTUm)

Dvorak, A., Geroldinger, S., Bosters, J., De Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2024). Liquid Phase-Enhance Molybdenum Homogenization during Sintering of PM Steels. In Molybdenum Symposium 2024 : E-Book (pp. 17–20). ( reposiTUm)

Geroldinger, S., Hojati, M., Dvorak, A., De Oro Calderon, R., Gierl-Mayer, C., Danninger, H., & Hellein, R. (2024). Sinter Hardening Hybrid Alloyed PM Steels based on MO Prealloyed Powders. In Molybdenum Symposium 2024 : E-Book (pp. 26–30). http://hdl.handle.net/20.500.12708/210451 ( reposiTUm)

Gierl-Mayer, C., & Danninger, H. (2022). Physical Properties of Sintered Steels: Effect on Young’s Modulus, Damping and Electrical Conductivity. In Proceedings of World PM2022, Congress and Exhibition. World PM2022 Congress and Exhibition, Lyon, France. http://hdl.handle.net/20.500.12708/139442 ( reposiTUm)

Danninger, H., Hojati, M., Tokatligil, D. D., Konegger, T., & Gierl-Mayer, C. (2022). Measurement of the pore diameter in sitnered steels with varying porosity. In Proceedings of World PM2022, Congress and Exhibition (p. 5368092). ( reposiTUm)

Hojati, M., Gierl-Mayer, C., & Danninger, H. (2022). Monotonic And Cyclic Propertie OF Sinter Hardenedf PM Steels Prepared By Hybrid Alloying. In European Powder Metallurgy Association (Ed.), Proceedings World PM2022. ( reposiTUm)

Edtmaier, C., Danninger, H., Halvaci, T., Weirather, T., & Granzer, T. (2022). Influence of heat treatment conditions on magnetic, thermal and electrical properties of tungsten heavy alloys. In Proceedings of the 20th International Conference on Refractory Metals and Hard Materials (p. 14). http://hdl.handle.net/20.500.12708/50858 ( reposiTUm)

Geroldinger, S., De Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2022). Properties Of PM Steel Alloyed Through The Masteralloy Route - A Comparison To Conventional PM Grades. In Proceedings of World PM2022, Congress and Exhibition. World PM2022 Congress And Exhibition, Lyon, France. http://hdl.handle.net/20.500.12708/139441 ( reposiTUm)

Schneider, M., Danninger, H., & Gierl-Mayer, C. (2022). Effect Of Tempering And Nitrogen Content On The Heat-treated Impact Toughness Of Sintered Steels. In Proceedings of World PM2022 Congress and Exhibition. World PM2022 Congress and Exhibition, Lyon, France. http://hdl.handle.net/20.500.12708/139447 ( reposiTUm)

Danninger, H., de Oro Calderon, R., & Gierl-Mayer, C. (2021). The use of transient liquid phases in powder metallurgy. In Materials Science Forum (Vol. 1016, pp. 69–76). Trans Tech Publications. https://doi.org/10.4028/www.scientific.net/MSF.1016.69 ( reposiTUm)

Mitterlehner, M., Gschiel, H., Danninger, H., & Gierl-Mayer, C. (2021). Investigation of the Impact of Powder Shape on Spreading Dense Layers Using the Spreading Tester. In Proceedings of the Metal Additive Manufacturing Conference 2021 (pp. 199–210). ASMET. http://hdl.handle.net/20.500.12708/50822 ( reposiTUm)

Hojati, M., Gierl-Mayer, C., & Danninger, H. (2021). Effect of sintering temperature on microstructure and physical properties of differently compacted carbon and Mo alloyed steels. In Proceedings EuroPM2021 (p. 7). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/50829 ( reposiTUm)

Danninger, H., Prokofyev, M., Gierl-Mayer, C., Hellein, R., & Müller, A. (2021). Sintering of PM Steels with High Mn Content -- Using the Masteralloy Route. In Proceedings EuroPM2021 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/50828 ( reposiTUm)

Gierl-Mayer, C., Stepan, T., Caliskanoglu, O., Weinberger, T., & Danninger, H. (2021). Chromium as alloying element in Mo base material- mechanical behavior at high temperatures. In Proceedings EuroPM2021 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/49659 ( reposiTUm)

Geroldinger, S., de Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2021). Carbon as Key Element for the Behaviour of “Tailored” Liquid Phases During Sintering. In Proceedings EuroPM2021 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/49658 ( reposiTUm)

Hojati, M., Gierl-Mayer, C., & Danninger, H. (2021). Effect of sintering atmosphere on sintering process, microstructure and mechanical properties of compacted plain iron and carbon steel. In Proceedings EuroPM2021 (p. 8). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/49657 ( reposiTUm)

Lederer, M., Kotas, A. B., Khatibi, G., & Danninger, H. (2020). On crack propagation in homogeneous and composite materials under mixed mode loading conditions. In Procedia Structural Integrity (pp. 203–208). Procedia Structural Integrity. https://doi.org/10.1016/j.prostr.2020.01.087 ( reposiTUm)

Mitterlehner, M., Danninger, H., Gierl-Mayer, C., Fürst, M., & Gschiel, H. (2020). Spreading Behaviour and Packing Density of the Powder Bed in L-PBF as a Function of Spreading Strategy and Velocity. In Proceedings EuroPM2020 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/49596 ( reposiTUm)

Danninger, H., Eitenberger, E., Hradil, K., & Dlapka, M. (2020). Study On Strengthening Intermetallic Phases In Carbon-Free PM High Speed Steels. In Proceedings EuroPM2020 (p. 7). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/49595 ( reposiTUm)

Geroldinger, S., de Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2020). Properties And Microstructures Of Sintered Steels Allyed With Cr,Mn And Si By The Masteralloy Route. In Proceedings EuroPM2020 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/49597 ( reposiTUm)

Momeni, M., Danninger, H., & Gierl-Mayer, C. (2020). Electrical Conductivity and Physical Properties Of Sintered Steels Prepared from Different Base Powders. In Proceedings EuroPM2020 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/49598 ( reposiTUm)

Mitterlehner, M., Danninger, H., Gierl-Mayer, C., & Gschiel, H. (2020). Investigation of the Influence of Powder Moisture on the Spreadability Using the Spreading Tester. In Proceedings of the Metal Additive Manufacturing Conference 2020. Online Conference “MAMC-2020 - Metal Additive Manufacturing Conference,” Leoben, Austria. ASMET. http://hdl.handle.net/20.500.12708/50776 ( reposiTUm)

Gierl-Mayer, C., Prokofyev, M., Huemer, M.-C., Hellein, R., Bolitschek, J., Müller, A., & Danninger, H. (2020). Powder Metallurgy Manufacturing Of Hadfield-Type Mn Steels With TRIP Behaviour. In Proceedings EuroPM2020 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/50782 ( reposiTUm)

Gierl-Mayer, C., Matl, G., Bonta, M., Limbeck, A., Dlapka, M., & Danninger, H. (2020). Laser induced breakdown spectroscopy (LIBS) for C-profile measurements. In Proceedings ECHT2020 (p. 8). A3TS and VWT. http://hdl.handle.net/20.500.12708/50791 ( reposiTUm)

Mitterlehner, M., Danninger, H., Gierl-Mayer, C., Gschiel, H., & Hatzenbichler, M. (2020). Processability of Moist Superalloy Powder by SLM. In Proceedings of the Metal Additive Manufacturing Conference 2020 (pp. 111–123). ASMET. http://hdl.handle.net/20.500.12708/50762 ( reposiTUm)

Geroldinger, S., de Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2019). Optimization of Liquid Phases for Enhancing Sintering of PM‐Steels. In Proceedings Euro PM2019 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/50540 ( reposiTUm)

Mitterlehner, M., Danninger, H., & Gierl-Mayer, C. (2019). Study on Segregation Effects in Powder Layers Built in Powder Bed Fusion Processes for Additive Manufacturing. In Proceedings Euro PM2019 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/50542 ( reposiTUm)

Momeni, M., Danninger, H., & Gierl-Mayer, C. (2019). Changes in Pore Connectivity during Sintering of High Density Powder Compacts at Varying Temperatures. In Proceedings Euro PM2019 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/50541 ( reposiTUm)

Azadbeh, M., Milani, S., Danninger, H., & Gierl-Mayer, C. (2019). Influence of Heat Treating on Microstructural Evolution and Mechanical Properties of Spark Plasma Sintered Cu-14Al-4Ni Mixed Powder. In Proceedings Euro PM2019 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/50613 ( reposiTUm)

Gierl-Mayer, C., Salfinger, M., Scherleitner, E., Krautgasser, C., Hellein, R., & Danninger, H. (2019). Determination of Young’s Modulus and Damping Behaviour of PM Structural Steels. In Proceedings Euro PM2019 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/50614 ( reposiTUm)

Gierl-Mayer, C., de Oro Calderon, R., & Danninger, H. (2019). Die Masteralloy-Route als attraktive Legierungsvariante für sinterhärtende Stähle. In Tagungsband ASMET Werkstofftechniktagung nud 31. Härtereitagung (p. 9). ASMET. http://hdl.handle.net/20.500.12708/50428 ( reposiTUm)

Danninger, H., de Oro Calderon, R., & Gierl-Mayer, C. (2019). Legierungssysteme für die Wärmebehandlung von Sinterstählen. In Tagungsband Werkstofftechniktagung & 31. Härtereitagung (p. 9). ASMET. http://hdl.handle.net/20.500.12708/50427 ( reposiTUm)

Pretterhofer, S., Frühwirth, H., Gierl-Mayer, C., & Danninger, H. (2019). Sintering Behavior of Al-B4C Powder Material and its Phase Evolution during Rolling. In Proceedings of the 19#^{th} International Symposium on the Packaging and Transportation of Radioactive Materials PATRAM 2019; August 4-9, 2019, New Orleans, LA, USA (pp. 1–10). http://hdl.handle.net/20.500.12708/50766 ( reposiTUm)

Mitterlehner, M., Danninger, H., Gierl-Mayer, C., Frank, J., & Tomischko, W. (2019). Study On The Influence Of The Blade On The Powder Layers Built In Powder Bed Fusion Processes For Additive Manufacturing. In Proceedings: MAMC 2019 Metal Additive Conference, Industrial Perspectives in Additive Technologies (p. 11). http://hdl.handle.net/20.500.12708/50659 ( reposiTUm)

Höfler, T., Auinger, M., Linder, B., Angeli, G., & Danninger, H. (2019). Analysing and modeling high temperature oxidation of steel slabs during reheating. In Proceedings 11th IRC (p. 12). Associacao Brasileira de Metalurgia, Materiais e Mineracao. http://hdl.handle.net/20.500.12708/50698 ( reposiTUm)

Marschnigg, S., Gierl-Mayer, C., Danninger, H., Weirather, T., Granzer, T., & Zobl, P. (2019). Improving the Characterization of the Binder Phase in W Heavy Alloys by Chemical Pretreatment. In Proceedings Euro PM2019 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/50539 ( reposiTUm)

Mitterlehner, M., Danninger, H., & Gierl-Mayer, C. (2018). A new method for describing the morphology of powder layers in direct laser melting. In Proceedings MAMC-2018 (pp. 31–40). ASMET. http://hdl.handle.net/20.500.12708/50285 ( reposiTUm)

de Oro Calderon, R., Jaliliziyaeian, M., Dunkley, J. J., Gierl-Mayer, C., & Danninger, H. (2018). Enhanced Hardenability of Lean Sintered Steels by the Use of Fine Masteralloy Powders. In Proceedings WorldPM2018 (p. 7). The Chinese Society for Metals. http://hdl.handle.net/20.500.12708/50229 ( reposiTUm)

Mayrhofer, P. H. (2018). Strategien für die Entwicklung harter, zäher und stabiler PVD-Hartstoffschichten für Schneidwerkzeuge. In H. Danninger, L. Sigl, & C. Broeckmann (Eds.), Pulvermetallurgie - Neue Herausforderungen und neue Wege (pp. 157–188). Heimdall Verlag. http://hdl.handle.net/20.500.12708/67957 ( reposiTUm)

Mitterlehner, M., Danninger, H., & Gierl-Mayer, C. (2018). Study on the layer building of powders in powder bed fusion processes for Additive Manufacturing. In Proceedings EuroPM2018 (p. 7). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/50246 ( reposiTUm)

Ouda, K., Danninger, H., & Gierl-Mayer, C. (2018). Magnetic measurements complemented by thermodynamic calculations as tools for characterizing the microstructure of PM steels. In Proceedings EuroPM2018 (p. 7). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/50248 ( reposiTUm)

de Oro Calderon, R., Steinlechner, R., Jaliliziyaeian, M., Dunkley, J. J., Gierl-Mayer, C., & Danninger, H. (2018). Masteralloys: a key to tailor hardenability. In Proceedings EuroPM2018 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/50249 ( reposiTUm)

Gierl-Mayer, C., Jetzinger, M., & Danninger, H. (2018). Thermoanalytical characterization of deoxidation behaviour and carbon dissolution in PM-carbon steels of high density. In Proceedings EuroPM2018 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/50243 ( reposiTUm)

Danninger, H., Gierl-Mayer, C., & Jaliliziyaeian, M. (2018). Combined thermal and chemical analysis for studying the reactions of P carriers in ferrous compacts. In Proceedings EuroPM2018 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/50242 ( reposiTUm)

de Oro Calderon, R., Jaliliziyaeian, M., Dunkley, J. J., Gierl-Mayer, C., & Danninger, H. (2018). The real benefits of high sintering temperatures on the properties of low alloy sintered steels containing masteralloys. In Proceedings EuroPM2018 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/50244 ( reposiTUm)

de Oro Calderon, R., Jaliliziyaeian, M., Gierl-Mayer, C., & Danninger, H. (2018). Adapting sintering processes to successfully sinter “challenging” materials. In Proceedings EuroPM2018 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/50245 ( reposiTUm)

Danninger, H., de Oro Calderon, R., & Gierl-Mayer, C. (2018). Surface Chemistry of Metal Powders and Changes during the Sintering Process. In Proceedings WorldPM2018 (p. 6). The Chinese Society for Metals. http://hdl.handle.net/20.500.12708/50226 ( reposiTUm)

de Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2018). Sintering Enhancement by the Use of Masteralloys: Important Concepts and New Possibilities. In Proceedings WorldPM2018 (p. 11). The Chinese Society for Metals. http://hdl.handle.net/20.500.12708/50227 ( reposiTUm)

de Oro Calderon, R., Jaliliziyaeian, M., Gierl-Mayer, C., & Danninger, H. (2018). Effect of Sintering Conditions on the Properties of Lean PM Steels Produced through the Masteralloy Route. In Proceedings WorldPM2018 (p. 8). The Chinese Society for Metals. http://hdl.handle.net/20.500.12708/50228 ( reposiTUm)

Gierl-Mayer, C., Jetzinger, M., Dunkley, J. J., & Danninger, H. (2018). Sintering of PM-Steels with C-Masteralloy Addition. In Proceedings WorldPM2018 (p. 8). The Chinese Society for Metals. http://hdl.handle.net/20.500.12708/50029 ( reposiTUm)

de Oro Calderon, R., Dunkley, J. J., Gierl-Mayer, C., & Danninger, H. (2017). Mechanical Performance of Sintered Steels Containing Fine Masteralloy Powders Produced with a Novel Atomization Technique: “Ultra High Pressure Water Atomization.” In Proceedings EuroPM 2017 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/49919 ( reposiTUm)

Mitterlehner, M., Danninger, H., Gierl-Mayer, C., Wallner, S., & Leitner, H. (2017). Study on the Flowability of Gas Atomized High Alloy Powders for Additive Manufacturing. In Proceedings EuroPM 2017 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/49935 ( reposiTUm)

Marschnigg, S., Gierl-Mayer, C., Danninger, H., Weirather, T., Granzer, T., & Zobl, P. (2017). Non-destructive measurement of the tungsten content in the binder phase of tungsten heavy alloys. In Proceedings 19. Plansee Seminar 2017 (p. 9). Plansee Group Service GmbH. http://hdl.handle.net/20.500.12708/49926 ( reposiTUm)

Limbeck, A., Bonta, M., Calderon, R. de O., Gierl-Mayer, C., & Danninger, H. (2017). Elemental mapping of PM steels using LA-ICP-MS: laterally resolved analysis of metallic and non-metallic elements. In Book of Abstracts (p. 9). http://hdl.handle.net/20.500.12708/50107 ( reposiTUm)

Gierl-Mayer, C., Jetzinger, M., Jaliliziyaeian, M., Dunkley, J. J., & Danninger, H. (2017). C-Masteralloy: an Innovative Approach to Introduce Carbon in PM-steels. In Proceedings EuroPM 2017 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/49936 ( reposiTUm)

Gierl-Mayer, C., Tükör, Z., & Danninger, H. (2017). Chemically heterogeneous PM steels prepared from base powder. In Proceedings EuroPM 2017 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/49937 ( reposiTUm)

Gierl-Mayer, C., Matl, G., Bonta, M., Limbeck, A., Dlapka, M., & Danninger, H. (2017). C-profile Measurements by Laser Induced Breakdown Spectroscopy (LIBS). In Proceedings EuroPM 2017 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/49940 ( reposiTUm)

Azadbeh, M., Rouzegar, R., & Danninger, H. (2017). Microstructural Evolution of Sintered and Hot Deformed Cu-28Zn Prealloyed Powder Compacts. In Proceedings EuroPM 2017 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/49938 ( reposiTUm)

Azadbeh, M., Mousapour, M., & Danninger, H. (2017). Evolution of Zinc Evaporation During Supersolidus Liquid Phase Sintering of Cu-Zn. In Proceedings EuroPM 2017 (p. 5). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/49939 ( reposiTUm)

Calderon, R. de O., Gierl-Mayer, C., & Danninger, H. (2017). Die Masteralloy-Route für legierte Sinterstähle - neue Konzepte und Perspektiven. In Pulvermetallurgie - Schlüssel zur Mobilität (pp. 159–184). Pulvermetallurgie in Wissenschaft und Praxis. http://hdl.handle.net/20.500.12708/49997 ( reposiTUm)

Prieto Munoz, E. M., de Oro Calderon, R., Konegger, T., Gordo Oderiz, E., Gierl-Mayer, C., Danninger, H., & Alvaredo Olmos, P. (2017). Study of sintering behavior of TiAlCrFeMoNi multiprincipal element alloy. In Proceedings EuroPM 2017 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/49914 ( reposiTUm)

Danninger, H., & Gierl-Mayer, C. (2016). Oxygen transfer in Cr prealloyed PM steels through intermediate anneal before sintering. In Proceedings WorldPM2016 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/49381 ( reposiTUm)

Azadbeh, M., Mousapour, M., Rouzegar, R., & Danninger, H. (2016). In-Situ Bending During Sintering of Compacted Beams from Prealloyed Cu-Sn-Pb: Computer Simulation vs. Experiment. In Proceedings WorldPM2016 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/49383 ( reposiTUm)

Danninger, H., Oro Calderon, R., & Gierl-Mayer, C. (2016). Oxygen Transfer Reactions During Sintering of Ferrous Powder Compacts. In M. Ciobanu, I.-G. Bucse, & C. Nicolicescu (Eds.), ADEM 2016, Conference Book of Abstracts (pp. 1–2). Editura Universitaria. http://hdl.handle.net/20.500.12708/49740 ( reposiTUm)

Momeni, M., Danninger, H., & Gierl-Mayer, C. (2016). Study of the sintering process of two Cr-Mo prealloyed steels by thermal and chemical analysis. In Proceedings WorldPM2016 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/49382 ( reposiTUm)

Huemer, M.-C., Gierl-Mayer, C., Danninger, H., Dlapka, M., Stetina, G., & Ratzi, R. (2016). Supersolidus Sintering of Cr Prealloyed Steels by Conventional and Inductive Heating. In Proceedings WorldPM2016 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/49384 ( reposiTUm)

Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2016). Formation of Carbide Shells and Cavities from Cr Particles During Sintering of Mixed Fe-Cr-C Steels. In Proceedings WorldPM2016 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/49385 ( reposiTUm)

Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2016). Tailored Liquid-Phase Properties through the Use of Master Alloys: Microstructural Homogeneity vs. Dimensional Stability of Sintered Steels. In Advances in Powder Metallurgy & Particulate Materials-2016 (pp. 322–332). Advances in Powder Metallurgy & Particulate Materials-2016. http://hdl.handle.net/20.500.12708/49463 ( reposiTUm)

Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2016). Effects of H2 Atmospheres on Sintering of Steels Containing Oxidation Sensitive Elements Introduced Through the Master Alloy Route. In Advances in Powder Metallurgy & Particulate Materials-2016 (pp. 280–291). Advances in Powder Metallurgy & Particulate Materials-2016. http://hdl.handle.net/20.500.12708/49464 ( reposiTUm)

Oro Calderon, R., Bonta, M., Limbeck, A., Gierl-Mayer, C., & Danninger, H. (2016). Microstructure Development During Liquid Phase Sintering Studied Using Laser Ablation Inductively Coupled Plasma Mass Spectrometry (LA-ICP-MS). In Proceedings WorldPM2016 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/49387 ( reposiTUm)

Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2016). Dimensional Stability of Sintered Steels Containing Low Melting Point Master Alloys. In Proceedings WorldPM2016 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/49386 ( reposiTUm)

Gierl-Mayer, C., Danninger, H., & de Oro Calderon, R. (2016). Methane Formation During Sintering Of PM Steels Alloyed With Chromium And/or Manganese. In Developing the Powder Metallurgy Future (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/49394 ( reposiTUm)

Bonta, M., Oro Calderon, R., Gierl-Mayer, C., Danninger, H., & Limbeck, A. (2016). Laterally resolved analysis of steels using LIBS: Revealing the distribution of metallic and non-metallic additions. In Final Program (p. 54). http://hdl.handle.net/20.500.12708/49519 ( reposiTUm)

Limbeck, A., Bauer, V., Gierl-Mayer, C., & Danninger, H. (2015). Quantitative Analyse von Bor in PM-Stählen mittels LA-ICP-MS. In Kurzfassungen (p. 52). http://hdl.handle.net/20.500.12708/49199 ( reposiTUm)

de Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2015). The Challenge of Sintering Steels with New Alloying Compositions. In R. de Oro Calderon (Ed.), Proceedings Euro PM 2015 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/48969 ( reposiTUm)

de Oro Calderon, R., Bernardo Quejido, E., Campos Gomez, M., Gierl-Mayer, C., Danninger, H., & Torralba, J. M. (2015). Tailoring Master Alloys for Liquid Phase Sintering: Effect of Introducing Oxidation-Sensitive Elements. In Proceedings Euro PM 2015 (p. 12). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/48968 ( reposiTUm)

Mohammadzadeh, A., Azadbeh, M., Danninger, H., & Gierl-Mayer, C. (2015). Effect of Sintering Parameters on Zinc Loss in Prealloyed Alpha Brass Powder Compacts. In Proceedings Euro PM 2015 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/48967 ( reposiTUm)

Azadbeh, M., Danninger, H., & Mousapour, M. (2015). Comparing In-Situ Deflection Behavior during Sintering of Alloyed Powder Compact Beams of Cu28Zn and Cu10Sn10Pb. In Proceedings Euro PM 2015 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/48972 ( reposiTUm)

Danninger, H., Betzwar Kotas, A., & Weiss, B. (2015). Ermüdung von Hartmetallen im Gigacycle-Bereich - Prüftechnik und Werkstoffverhalten. In H. Kolaska, H. Danninger, & T. Gestrich (Eds.), Pulvermetallurgie in Wissenschaft und Praxis Band 31: Pulvermetallurgie: Effiziente Prozesse - besondere Eigenschaften (pp. 123–145). Fachverband Pulvermetallurgie. http://hdl.handle.net/20.500.12708/49076 ( reposiTUm)

Florek, R., Danninger, H., Ponemayr, H., Daxelmüller, M., Simancik, F., & Izdinsky, K. (2015). Metal Cutting Performance of Carbon-Free PM Tool Steels. In Proceedings Euro PM 2015 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/48966 ( reposiTUm)

Kuzmanovic, J., Danninger, H., Gierl-Mayer, C., Nenning, A., & Avakemian, A. (2015). Interstitial Effects during Sintering of Injection Moulded Al Base Alloys. In Proceedings Euro PM 2015 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/48970 ( reposiTUm)

Gierl-Mayer, C., Stepan, T., Sun, J., & Danninger, H. (2015). Reduction of Oxidised Steel Compacts during the Sintering Process. In Proceedings Euro PM 2015 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/48971 ( reposiTUm)

Schubert, W.-D. (2015). Feinst- und Ultrafeinkornhartmetalle: Vom Pulver zum Werkzeug. In H. Kolaska, H. Danninger, & T. Gestrich (Eds.), Pulvermetallurgie: Effiziente Prozesse - besondere Eigenschaften (pp. 3–33). Heimdall Verlag. http://hdl.handle.net/20.500.12708/49158 ( reposiTUm)

Gschiel, H., Gierl-Mayer, C., Danninger, H., Larsson, P.-O., & Vidarsson, H. (2014). Manufacturing and Microstructure of Porous Metal Supports for a Solid Oxide Fuel Cell. In Proceedings Euro PM2014 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/48655 ( reposiTUm)

Danninger, H., Avakemian, A., Gierl-Mayer, C., Dlapka, M., & Grafinger, M. (2014). Methane formation through substrate-atmosphere interaction during sintering of Si containing steels. In Proceedings Euro PM2014 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/48654 ( reposiTUm)

Gierl-Mayer, C., Zbiral, J., Danninger, H., & Ratzi, R. (2014). Enhanced Sintering of PM Steels by Addition of Fe-Ni-B Masteralloy. In Proceedings Euro PM2014 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/48656 ( reposiTUm)

Azadbeh, M., Danninger, H., Mohammadzadeh, A., & Gierl-Mayer, C. (2014). Effect of Green Density on Fragmentation-Rearrangement in Supersolidus Liquid Phase Sintering of Prealloyed Brass Powder. In Proceedings Euro PM2014 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/48657 ( reposiTUm)

Kuzmanovic, J., Danninger, H., Gierl-Mayer, C., & Nenning, A. (2014). Pulverspritzguss von Aluminumlegierungen - die Chemie als entscheidender Faktor. In C. C. Chimani, A. Kraly, & P. J. Uggowitzer (Eds.), Leichtmetalle-Prozesse-Anwendungen: Zukunftstechnologien als Basis für neue Mobilitätskonzepte (pp. 88–100). LKR Leichtmetallkompetenzzentrum Ranshofen GmbH. http://hdl.handle.net/20.500.12708/48689 ( reposiTUm)

Gschiel, H., Gierl-Mayer, C., & Danninger, H. (2014). Production and analysis of porous metal supports for a solid oxide fuel cell. In S. Mayer, M. Panzenböck, & H. Clemens (Eds.), Sonderbände der Praktischen Metallographie 46: Fortschritte in der Metallographie (pp. 157–162). DGM-Inventum. http://hdl.handle.net/20.500.12708/48690 ( reposiTUm)

Huemer, M.-C., Gierl-Mayer, C., & Danninger, H. (2014). Reaction of boron and manganese from compacts with sintering furnace linings through the gas phase. In R. A. Chernenkoff & W. B. James (Eds.), PM2014 Manuscript Preprints (p. 11). Metal Powder Industries Federation. http://hdl.handle.net/20.500.12708/48547 ( reposiTUm)

Danninger, H., Sohar, C., Xu, C., Weiss, B., Betzwar-Kotas, A., & Khatibi, G. (2014). Fatigue behaviour of different types of PM steels in the gigacycle range. In R. A. Chernenkoff & W. B. James (Eds.), Manuscript Preprints PM2014 (p. 17). Metal Powder Industries Federation. http://hdl.handle.net/20.500.12708/48546 ( reposiTUm)

Bonta, M., Gierl-Mayer, C., Danninger, H., & Limbeck, A. (2014). Revealing the distribution of non-mteallic additions in steel samples using LA-ICP-MS. In 2014 Winter Conference Program and Abstracts (p. 140). http://hdl.handle.net/20.500.12708/48712 ( reposiTUm)

Dadal, E., Gierl, C., Danninger, H., Sencekova, L., Izdinsky, K., & Simancik, F. (2013). Manufacturing of Mo preforms with defined porosity for subsequent reactive infiltration. In H. Kestler & L. Sigl (Eds.), Proceedings 18. Plansee Seminar 2013 (p. 10). Plansee SE. http://hdl.handle.net/20.500.12708/48173 ( reposiTUm)

Betzwar-Kotas, A., Weiss, B., Danninger, H., Sanchez Moreno, J. M., & Mingard, K. (2013). Fatigue testing of hardmetals in the gigacycle range. In H. Kestler & L. Sigl (Eds.), Proceedings 18. Plansee Seminar 2013 (p. 11). Plansee SE. http://hdl.handle.net/20.500.12708/48172 ( reposiTUm)

Hradil, K., Avakemian, A., Dlapka, M., Gierl, C., & Danninger, H. (2013). Röntgenographische Analyse von Restaustenit-Gehalten an pulvermetallurgisch hergestellten Stählen. In R. Schneider (Ed.), Tagungsband Härtereitagung 2013 (pp. 68–74). ASMET. http://hdl.handle.net/20.500.12708/48118 ( reposiTUm)

Dlapka, M., Gierl, C., Strobl, S., & Danninger, H. (2013). Austenitkornstabilität in Sinterstählen bei hohen Temperaturen. In R. Schneider (Ed.), Tagungsband Härtereitagung 2013 (pp. 44–49). ASMET. http://hdl.handle.net/20.500.12708/48117 ( reposiTUm)

Klammer, E., Dlapka, M., Gierl, C., & Danninger, H. (2013). Trockenlauf-Gleitverschleiß von sintergehärteten Stählen für Getriebekomponenten. In R. Schneider (Ed.), Tagungsband Härtereitagung 2013 (pp. 75–80). ASMET. http://hdl.handle.net/20.500.12708/48119 ( reposiTUm)

Zikin, A., Yung, D.-L., Hussainova, I., Danninger, H., Pirso, J., & Gavrilovic-Wohlmuther, A. (2013). Deposition and Characterisation of Refractory Cermets Reinforced Ni-Based PTA Hardfacings. In H. Kestler & L. Sigl (Eds.), Proceedings 18. Plansee Seminar 2013 (p. 14). Plansee SE. http://hdl.handle.net/20.500.12708/48180 ( reposiTUm)

Gierl, C., Gschiel, H., Englerth, E., & Danninger, H. (2013). Introduction of carbon into sintered steels through different masteralloy routes. In H. Miura & A. Kawasaki (Eds.), Proceedings of the 2012 Powder Metallurgy World Congress & Exhibition (p. 7). Japan Society of Powder and Powder Metallurgy. http://hdl.handle.net/20.500.12708/46016 ( reposiTUm)

Gierl, C., & Danninger, H. (2013). Reduction effects during sintering of Cr and Mn alloyed steel compacts. In H. Miura & A. Kawasaki (Eds.), Proceedings of the 2012 Powder Metallurgy World Congress & Exhibition (p. 7). Japan Society of Powder and Powder Metallurgy. http://hdl.handle.net/20.500.12708/47994 ( reposiTUm)

Putz, B., Bonta, M., Gierl-Mayer, C., Danninger, H., & Limbeck, A. (2013). LA-ICP-MS imaging of the distribution of non-metallic additives in powder metallurgic steel samples. In Book of Abstracts (p. 1). http://hdl.handle.net/20.500.12708/48380 ( reposiTUm)

Garcia, L. F., Danninger, H., & Ponemayr, H. (2013). Laser deposition of precipitation hardening carbon-free tool steel powder. In Proceedings Euro PM2013 (pp. 67–72). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/48233 ( reposiTUm)

Dadal, E., Gierl-Mayer, C., Danninger, H., Sencekova, L., Izdinsky, K., & Simancik, F. (2013). Manufacturing of Si infiltrable PM molybdenum preforms with varying porosity characteristics. In Proceedings Euro PM2013 (pp. 369–374). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/48234 ( reposiTUm)

Azadbeh, M., Danninger, H., & Gierl-Mayer, C. (2013). Macroscopic illustration of Zn evaporation during liquid phase sintering of Cu-28Zn prepared from prealloyed powder. In Proceedings Euro PM2013 (pp. 381–386). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/48235 ( reposiTUm)

Bernardo Quejido, E., Campos Gomez, M., Torralba, J. M., Gierl-Mayer, C., Danninger, H., & Frykholm, R. (2013). Lean steels modified with a new Cu base master alloy: Influence of process parameters in dimensional and sintering behaviour. In Proceedings Euro PM2013 (pp. 319–324). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/46169 ( reposiTUm)

Gierl-Mayer, C., Momeni, M., Danninger, H., & Iovea, M. (2013). Production of ferrous PM-parts for calibration and demonstration of typical defect detection performance of in-line X-ray digital radiography equipment. In Proceedings Euro PM2013 (pp. 169–174). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/46290 ( reposiTUm)

de Oro Calderon, R., Campos Gomez, M., Gierl-Mayer, C., Danninger, H., & Torralba, J. M. (2013). Introduction of oxidation-sensitive elements in low alloyed steels using the master alloy route: Key aspects for success. In Proceedings Euro PM2013 (pp. 337–342). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/46202 ( reposiTUm)

Gierl-Mayer, C., Klammer, E., Danninger, H., & Dlapka, M. (2013). Wear mechanisms occurring in dry sliding of sinter hardened alloy steels against bearing steel. In Proceedings Euro PM2013 (pp. 397–402). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/46162 ( reposiTUm)

Zikin, A., Hussainova, I., Badisch, E., & Danninger, H. (2012). Characterization of TiC-NiMo reinforced NiCrBSi hardfacing. In Proceedings 20. IFHTSE (pp. 535–540). Chinese Heat Treatment Society. http://hdl.handle.net/20.500.12708/47995 ( reposiTUm)

Kuzmanovic, J., Danninger, H., Gierl, C., Zbiral, J., & Zikin, A. (2012). Sintering of Fe and Ni based MMCs reinforced with fused tungsten carbide particles. In Proceedings Euro PM2012 Vol.2 (pp. 57–62). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/47886 ( reposiTUm)

Azadbeh, M., Danninger, H., & Gierl, C. (2012). Comparing Particle Rearrangement During Liquid Phase Sintering of Cu-20Zn and Cu-10Sn-10Pb Prepared from Prealloyed Powder. In Proceedings Euro PM2012 Vol.1 (pp. 175–180). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/47885 ( reposiTUm)

Larisegger, S., Holzlechner, G., Eitenberger, E., Rogalli, M., Nelhiebel, M., Schulze, H., Kubicek, M., Danninger, H., & Hutter, H. (2012). ToF-SIMS Characterization of Passivation Systems for the Copper Metallization in Semiconductor Devices. In Secondary Ion Mass Spectrometry (p. 63). http://hdl.handle.net/20.500.12708/47865 ( reposiTUm)

Danninger, H., Gierl, C., Gschiel, H., Dlapka, M., & Hemmatpour, Y. (2011). Iron-carbon masteralloy - a promising approach for introducing carbon into high density sintered steels. In I. E. Anderson & T. W. Pelletiers (Eds.), Preprints PowderMet2011 (p. 11). Metal Powder Industries Federation. http://hdl.handle.net/20.500.12708/47359 ( reposiTUm)

Dlapka, M., Danninger, H., & Gierl, C. (2011). Factors influencing the austenite grain size in sinter hardened low Cr-Mo alloyed PM steels. In I. E. Anderson & T. W. Pelletiers (Eds.), Preprints PowderMet2011 (p. 15). Metal Powder Industries Federation. http://hdl.handle.net/20.500.12708/47360 ( reposiTUm)

Dlapka, M., Danninger, H., Gierl, C., Altena, H., Stetina, G., & Orth, P. (2011). Low pressure carburization of chromium containing sintered steels for gear applications. In R. Schneider (Ed.), Proceedings Euro HT 2011 (p. 10). ASMET. http://hdl.handle.net/20.500.12708/47289 ( reposiTUm)

Dlapka, M., Danninger, H., Gierl, C., & Lindqvist, B. (2011). Siner hardening - a special heat treatment for powder metallurgy precision parts. In R. Schneider (Ed.), Proceedings Euro HT 2011 (p. 10). ASMET. http://hdl.handle.net/20.500.12708/47290 ( reposiTUm)

Dlapka, M., Danninger, H., Gierl, C., Weiss, B., Khatibi, G., & Betzwar-Kotas, A. (2011). Gigacycle fatigue of different low alloyed PM steels for sinter hardening. In Proceedings EuroPM2011 Volume 1 (pp. 3–8). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/47434 ( reposiTUm)

Gierl, C., Molnar, W., & Danninger, H. (2011). Correlations between microstructure, mechanical properties and sintering parameters for PM steels. In Proceedings Euro PM2011 Volume 1 (pp. 61–67). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/47436 ( reposiTUm)

Azadbeh, M., Danninger, H., & Gierl, C. (2011). Evolution of properties and graded densification during sintering of Cu-20Zn prepared from prealloyed powder. In Proceedings Euro PM2011 Volume 3 (pp. 99–104). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/47437 ( reposiTUm)

Danninger, H., Gierl, C., & Mitrovic, N. (2011). Magnetic and mechanical properties of sintered Fe-Co-Mo/W precipitation hardened alloys. In Proceedings Euro PM2011 Volume 1 (pp. 279–284). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/47435 ( reposiTUm)

Kuzmanovic, J., Zikin, A., Gierl, C., & Danninger, H. (2011). Verschleißfeste Eisen- und Nickel-Basis-Legierungen verstärkt mit WC-W²C. In Tribologie in Industrie und Forschung, Werkstoff- und Energieeffizienz - Herausforderung und Lösungsansätze (p. 203). http://hdl.handle.net/20.500.12708/48112 ( reposiTUm)

Gierl, C., Danninger, H., & de Oro Calderon, R. (2011). Charakterisierung von Sintervorgängen in Eisenbasis-Pulverpresslingen mittels Prozessanalytik durch thermische Analysenmethoden. In H. Kolaska (Ed.), Pulvermetallurgie in Wissenschaft und Praxis Band 27: Sintern - der zentrale Prozess der Pulvermetallurgie (pp. 215–236). Fachverband Pulvermetallurgie. http://hdl.handle.net/20.500.12708/47527 ( reposiTUm)

Khatibi, G., Lederer, M., Weiss, B., Licht, T., Bernardi, J., & Danninger, H. (2010). Accelerated mechanical fatigue testing and lifetime of interconnects in microelectronics. In P. Lukas (Ed.), Fatigue 2010 (pp. 511–519). Elsevier BV. https://doi.org/10.1016/j.proeng.2010.03.055 ( reposiTUm)

Ul Mohsin, I., Lager, D., Gierl, C., Hohenauer, W., & Danninger, H. (2010). Process optimization for sintering of metal injection molded copper through advanced kinetics analysis. In M. Bulger & B. Stebick (Eds.), Advances in Powder Metallurgy & Particulate Materials - 2010 (p. 9). Metal Powder Industries Federation. http://hdl.handle.net/20.500.12708/47065 ( reposiTUm)

Dlapka, M., Gierl, C., Danninger, H., Bengtsson, S., & Dudrova, E. (2010). Nitrogen pickup during sintering and subsequent cooling of chromium alloyed PM steels. In Proceedings PM2010 Volume 2 (pp. 13–20). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/46936 ( reposiTUm)

Dlapka, M., Gierl, C., Danninger, H., Altena, H., Stetina, G., & Orth, P. (2010). Porosity effects in low pressure carburizing of sintered steels. In Proceedings PM2010 Volume 2 (pp. 459–466). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/46938 ( reposiTUm)

Danninger, H., Jaliliziyaeian, M., Gierl, C., Hryha, E., & Bengtsson, S. (2010). Sintered steels prealloyed with manganese - chances and risks. In Proceedings PM2010 Volume 3 (pp. 3–10). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/46940 ( reposiTUm)

Hryha, E., Nyborg, L., Gierl, C., Danninger, H., & Bengtsson, S. (2010). Surface analysis of prealloyed steel powders: Qualitative and quantitative aspects. In Proceedings PM2010 Volume 1 (pp. 25–32). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/46939 ( reposiTUm)

Danninger, H., Garmendia Gutierrez, J. M., Ratzi, R., & Seyrkammer, J. (2010). Sinter brazing of ferrous parts with disappearing joint. In Proceedings PM2010 Volume 2 (pp. 385–392). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/46935 ( reposiTUm)

Gierl, C., Danninger, H., Silva Gonzalez, M., Schmidt, J., & Specht, E. (2010). Thermophysical properties of sintered steels - effect of porosity and composition. In Proceedings PM2010 Volume 5 (pp. 41–50). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/46955 ( reposiTUm)

Danninger, H., Gierl, C., Silva Gonzalez, M., Schmidt, J., & Specht, E. (2010). Thermal expansion and thermal conductivity of sintered steels - the real effect of the porosity. In Preprints (p. 11). Metal Powder Industries Federation. http://hdl.handle.net/20.500.12708/46956 ( reposiTUm)

Zlatkov, B. S., Nikolic, M. V., Danninger, H., Aleksic, O. S., Halwax, E., & Lukic, L. S. (2010). Sintered strontium hexaferrite shaped by injection moulding in unidirectional magnetic and electromagnetic field. In Proceedings PM2010 Volume 4 (pp. 627–634). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/46942 ( reposiTUm)

Zlatkov, B. S., ter Maat, J., Nikolic, M. V., Bavdek, U., Gierl, C., Danninger, H., & Aleksic, O. S. (2010). Parallel anaylsis of axial pressing, casting and PIM as routes for production of Alnico8. In Proceedings PM2010 Volume 4 (pp. 421–428). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/46941 ( reposiTUm)

Ul Mohsin, I., Lager, D., Hohenauer, W., Gierl, C., & Danninger, H. (2010). Numerical and experimental investigation of backbone binder removal from MIM copper parts. In Proceedings PM2010 Volume 4 (pp. 661–668). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/46943 ( reposiTUm)

de Oro Calderon, R., Campos Gomez, M., Gierl, C., Danninger, H., & Torralba, J. M. (2010). Atmosphere effects on liquid phase sintering of PM steels modified with master alloy additions. In Proceedings PM2010 Volume 2 (pp. 275–282). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/46937 ( reposiTUm)

Danninger, H., Vassileva, V., & Gierl, C. (2009). Atmosphere effects on sintering of carbon-free powder compacts from different ferrous powders. In CD Proceedings (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/46543 ( reposiTUm)

Azadbeh, M., Danninger, H., & Gierl, C. (2009). Correlation between dynamic elastic modulus, electrical conductivity and sintered density of low alloyed Cr-Mo sintered steels. In T. J. Jesberger & S. J. Mashl (Eds.), Advances in Powder Metallurgy & Particulate Materials - 2009 (p. 8). Metal Powder Industries Federation. http://hdl.handle.net/20.500.12708/46486 ( reposiTUm)

Gierl, C., & Danninger, H. (2009). Chemical reactions during sintering of Cr-Mo prealloyed powder compacts in inert and reducing atmospheres. In T. J. Jesberger & S. J. Mashl (Eds.), Advances in Powder Metallurgy & Particulate Materials - 2009 (p. 12). Metal Powder Industries Federation. http://hdl.handle.net/20.500.12708/46485 ( reposiTUm)

Ul Mohsin, I., Lager, D., Danninger, H., Hohenauer, W., & Gierl, C. (2009). Modelling of the thermal debinding behaviour of copper MIM parts using thermo-kinetic analysis. In Euro PM2009 CD Proceedings (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/46544 ( reposiTUm)

Dlapka, M., Danninger, H., Gierl, C., & Lindqvist, B. (2009). Investigation of the transition between open and closed porosity for different iron based PM materials. In Euro PM2009 CD Proceedings (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/46547 ( reposiTUm)

Momeni, M., Gierl, C., & Danninger, H. (2009). Electrical conductivity and microstructural changes of sintered plain carbon steels prepared from different base powders. In Euro PM2009 CD Proceedings (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/46545 ( reposiTUm)

Gierl, C., Jaliliziyaeian, M., Danninger, H., & Bengtsson, S. (2009). Dilatometry of PM carbon steels in different atmospheres - deoxidation effects. In Euro PM2009 CD Proceedings (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/46546 ( reposiTUm)

Sohar, C., Betzwar-Kotas, A., Gierl, C., Weiss, B., & Danninger, H. (2008). Fatigue behaviour of high-chromium alloyed cold work tool steel in the gigacycle fatigue regime. In J. Pokluda, P. Lukas, P. Sandera, & I. Dlouhy (Eds.), ECF17 - 17th European Conference on Fracture - Book of Abstracts & Proceedings on CD-ROM (p. 8). VUTIUM. http://hdl.handle.net/20.500.12708/46289 ( reposiTUm)

Harrer, B., Gierl, C., Danninger, H., Kastner, J., & Schneider, R. (2008). Röntgen-Computertomographie zur Quantifizierung von Porenstrukturen in Sintereisen. In R. Schneider (Ed.), Tagungsband Welser Werkstoffkolloquium 2008 (pp. 27–32). http://hdl.handle.net/20.500.12708/46071 ( reposiTUm)

Danninger, H., Gierl, C., Vassileva, V., Liersch, A., & Kalss, G. (2008). Reaction of nitrogen atmospheres with PM steel compacts during sintering. In R. Lawcock, A. Lawley, & P. J. McGeehan (Eds.), Advances in Powder Metallurgy & Particulate Materials - 2008 (p. 9). Metal Powder Industries Federation. http://hdl.handle.net/20.500.12708/46218 ( reposiTUm)

Jaliliziyaeian, M., Gierl, C., & Danninger, H. (2008). Effect of prealloyed Mn and Cr on chemical reactions during sintering of steel compacts. In R. Lawcock, A. Lawley, & P. J. McGeehan (Eds.), Advances in Powder Metallurgy & Particulate Materials - 2008 (p. 7). Metal Powder Industries Federation. http://hdl.handle.net/20.500.12708/46219 ( reposiTUm)

Dlapka, M., Gierl, C., Danninger, H., Altena, H., & Orth, P. (2008). Studie zur Niederdruckaufkohlung von Sinterformteilen variabler Porosität. In R. Schneider (Ed.), Tagungsunterlagen Härtereitagung 2008 (pp. 3–7). http://hdl.handle.net/20.500.12708/46230 ( reposiTUm)

Danninger, H., Gierl, C., Momeni, M., & Salak, A. (2008). Relationship between tensile strength and hardness in various grades of sintered iron and steels. In Proceedings Vol.3 (pp. 127–132). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/46159 ( reposiTUm)

Jaliliziyaeian, M., Gierl, C., Zbiral, J., & Danninger, H. (2008). Manganese evaporation during sintering of Fe-Mn-Cr compacts from prealloyed iron powders. In Proceedings EuroPM2008 Vol.1 (pp. 115–120). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/46155 ( reposiTUm)

Sohar, C., Betzwar-Kotas, A., Gierl, C., Weiss, B., & Danninger, H. (2008). Fatigue behaviour of PM tool steels in the gigacycle regime. In Proceedings EuroPM2008, Vol.1 (pp. 219–224). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/46156 ( reposiTUm)

Montealegre Melendez, I., Neubauer, E., Angerer, P., & Danninger, H. (2008). Influence of the hot pressing parameters on mechanical and microstructural properties of titanium matrix composites. In Proceedings Vol.2 (pp. 129–134). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/46157 ( reposiTUm)

Gierl, C., Jaliliziyaeian, M., Danninger, H., Vasilko, K., & Salak, A. (2008). Comparison of CaS and MnS as machining aids for PM steels. In Proceedings Vol.3 (pp. 235–241). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/46158 ( reposiTUm)

Sohar, C., Betzwar-Kotas, A., Gierl, C., Weiss, B., & Danninger, H. (2008). Fractographic evaluation of gigacycle fatigue failure of a high Cr alloyed cold work tool steel. In V. Leskovsek, B. Smoljan, H. Jäger, & M. Jenko (Eds.), Materials and Technology - Special Isseu (pp. 104–105). http://hdl.handle.net/20.500.12708/46047 ( reposiTUm)

Gierl, C., Tükör, Z., & Danninger, H. (2008). Sintering of chemically heterogeneous P/M steels prepared from base powder blends. In A. Arvand & H. Danninger (Eds.), Proceedings PM Auto ’08 (p. 8). Mashad Powder Metallurgy Co. http://hdl.handle.net/20.500.12708/46040 ( reposiTUm)

Strobl, S., Wagesreither, J., Gierl, C., Kupkova, M., Kupka, M., & Cerny, M. (2008). Mechanical Properties of PM Copper Alloyed Iron Parts with Microgradient Structure. In A. Arvand & H. Danninger (Eds.), Proceedings PM Auto ’08 (p. 10). Mashad Powder Metallurgy Co. http://hdl.handle.net/20.500.12708/46038 ( reposiTUm)

Sameie, S., Gierl, C., & Danninger, H. (2008). Modification of Catalytically-Debinded Feedstock for Powder Injection Molding. In A. Arvand & H. Danninger (Eds.), Proceedings PM Auto ’08 (p. 11). Mashad Powder Metallurgy Co. http://hdl.handle.net/20.500.12708/46037 ( reposiTUm)

Jaliliziyaeian, M., Gierl, C., & Danninger, H. (2008). Influence of Manganese on the Sintering Behavior of Atomized Iron Powder. In A. Arvand & H. Danninger (Eds.), Proceedings PM Auto ’08 (p. 9). Mashad Powder Metallurgy Co. http://hdl.handle.net/20.500.12708/46036 ( reposiTUm)

Dokhantchi, M., Danninger, H., & Loibnegger, F. (2008). Influence of Temperature on Fracture Toughness of a PM-Steel. In A. Arvand & H. Danninger (Eds.), Proceedings PM Auto ’08 (p. 10). Mashad Powder Metallurgy Co. http://hdl.handle.net/20.500.12708/46039 ( reposiTUm)

Sohar, C., Betzwar-Kotas, A., Gierl, C., Weiss, B., & Danninger, H. (2008). Anisotropy effects on gigacycle fatigue behavior of 12% chromium alloyed cold work tool steel. In V. Leskovsek, B. Smoljan, H. Jäger, & M. Jenko (Eds.), Materials and Technology - Special Issue (pp. 106–107). http://hdl.handle.net/20.500.12708/46046 ( reposiTUm)

Danninger, H., & Gierl, C. (2008). Strategies for manufacturing of highly loaded PM precision parts. In A. Arvand & H. Danninger (Eds.), Proceedings PM Auto ’08 (p. 10). Mashad Powder Metallurgy Co. http://hdl.handle.net/20.500.12708/46035 ( reposiTUm)

Danninger, H., Harold, C., Rouzbahani, F., Simancik, F., Izdinsky, K., Ponemayr, H., & Daxelmüller, M. (2008). Wärmebehandlungsverhalten von kohlenstofffreien PM-Werkzeugstählen auf Basis Fe-Co-(Mo,W). In R. Schneider (Ed.), Tagungsunterlagen Härtereitagung 2008 (pp. 64–68). http://hdl.handle.net/20.500.12708/46231 ( reposiTUm)

Danninger, H., Harold, C., Rouzbahani, F., Ponemayr, H., Daxelmüller, M., Simancik, F., & Izdinsky, K. (2008). Particle reinforced composites based on carbon-free precipitation hardening high speed steels. In R. Lawcock, A. Lawley, & P. J. McGeehan (Eds.), Advances in Powder Metallurgy & Particulate Materials - 2008 (p. 13). Metal Powder Industries Federation. http://hdl.handle.net/20.500.12708/46217 ( reposiTUm)

Gierl, C., Azadbeh, M., & Danninger, H. (2007). Experimental procedures for measuring the static and dynamic Young’s moduli of sintered steels. In Proceedings Euro PM2007 (pp. 149–154). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/45830 ( reposiTUm)

Zendron, M., Molinari, A., Girardini, L., Zbiral, J., & Danninger, H. (2007). Effect of composition and pressure of the backfilling gas on vacuum sintering of manganese alloyed steels. In Proceedings Euro PM2007 (pp. 15–20). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/45832 ( reposiTUm)

Jaliliziyaeian, M., Gierl, C., & Danninger, H. (2007). Effect of sintering atmosphere and alloy elements on the ferrite-austenite transformation of iron compacts. In Proceedings Euro PM2007 (pp. 131–136). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/45831 ( reposiTUm)

Vassileva, V., Danninger, H., Strobl, S., & Gierl, C. (2007). Atmosphere effects on sintering of ferrous powder compacts containing boron. In Proceedings Euro PM2007 (pp. 53–58). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/45829 ( reposiTUm)

Danninger, H., Xu, C., & Gierl, C. (2007). Process-temperature control rings as a tool for characterization of the sintering process. In Proceedings Euro PM2007 (pp. 181–186). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/45828 ( reposiTUm)

Sohar, C., Betzwar-Kotas, A., Gierl, C., Weiss, B., & Danninger, H. (2007). Location of crack initiation in the gigacycle fatigue regime for high chromium alloyed cold work tool steel. In Proceedings (p. 227). Ruhr-Universität. http://hdl.handle.net/20.500.12708/45857 ( reposiTUm)

Betzwar-Kotas, A., Sohar, C., Gierl, C., Weiss, B., & Danninger, H. (2006). Gigacycle fatigue fractography of high Cr alloyed cold work tool steel. In L. Parilak (Ed.), Proceedings Fraktografia / Fractography 2006 (pp. 181–188). Slovak Academy of Sciences. http://hdl.handle.net/20.500.12708/45514 ( reposiTUm)

Sohar, C., Betzwar-Kotas, A., Gierl, C., Weiss, B., & Danninger, H. (2006). Gigacycle fatigue fractography of high Cr alloyed cold work tool steel. In A. Kneissl (Ed.), Fortschritte in der Metallographie (pp. 339–346). Werkstoff-Informationsgesellschaft. http://hdl.handle.net/20.500.12708/45491 ( reposiTUm)

Stetina, G., Kalss, G., Gierl, C., Danninger, H., & Orth, P. (2006). Establishing CCT diagrams for sinter hardening grade Cr-Mo prealloyed steels. In K. Y. Eun & Y.-S. Kim (Eds.), Extended Abstracts of 2006 Powder Metallurgy World Congress (pp. 836–837). Korean Powder Metallurgy Institute. http://hdl.handle.net/20.500.12708/45496 ( reposiTUm)

Kalss, G., Danninger, H., Gierl, C., Stetina, G., & Orth, P. (2006). Quantification of Porosity of a Powder Metallurgical Steel by Image Analysis. In A. Kneissl (Ed.), Fortschritte in der Metallographie (pp. 105–112). Werkstoff-Informationsgesellschaft. http://hdl.handle.net/20.500.12708/45490 ( reposiTUm)

Xu, C., Danninger, H., Khatibi, G., & Weiss, B. (2006). Gigacycle fatigue endurance strength of high density Mo and Cr-Mo prealloyed sintered steel. In K. Y. Eun & Y.-S. Kim (Eds.), Extended Abstracts of 2006 Powder Metallurgy World Congress (pp. 385–386). Korean Powder Metallurgy Institute. http://hdl.handle.net/20.500.12708/45493 ( reposiTUm)

Xu, C., Danninger, H., Khatibi, G., & Weiss, B. (2006). Gigacycle fatigue crack initiation in Cr-Mo prealloy sintered steels. In K. Y. Eun & Y.-S. Kim (Eds.), Extended Abstracts of 2006 Powder Metallurgy World Congress (pp. 136–137). Korean Powder Metallurgy Institute. http://hdl.handle.net/20.500.12708/45494 ( reposiTUm)

Danninger, H., Xu, C., & Lindqvist, B. (2006). Oxygen removal during sintering of steels prepared from Cr-Mo and Mo prealloyed powders. In K. Y. Eun & Y.-S. Kim (Eds.), Extended Abstracts of 2006 Powder Metallurgy World Congress (pp. 814–815). Korean Powder Metallurgy Institute. http://hdl.handle.net/20.500.12708/45492 ( reposiTUm)

Shahmohammadi, M., Simchi, A., Danninger, H., & Arvand, A. (2006). Investigation on the sintering behaviour of P/M Al-Zn-Mg-Cu alloy. In K. Y. Eun & Y.-S. Kim (Eds.), Extended Abstracts of 2006 Powder Metallurgy World Congress (pp. 536–537). Korean Powder Metallurgy Institute. http://hdl.handle.net/20.500.12708/45495 ( reposiTUm)

Danninger, H., & Weiss, B. (2006). Design and Capabilities of PM Components and Materials: Fatigue Behaviour. In Course Figures Vol 1 (pp. 231–254). http://hdl.handle.net/20.500.12708/45465 ( reposiTUm)

Gierl, C., Rouzbahani, F., Harold, C., Danninger, H., Ponemayr, H., & Daxelmüller, M. (2006). Heat treatment and microstructure of carbon-free precipitation hardened PM tool steel Fe-Co-Mo/W. In R. Schneider (Ed.), Proceedings 15th IFHTSE (pp. 106–111). ASMET. http://hdl.handle.net/20.500.12708/45540 ( reposiTUm)

Danninger, H. (2005). The way to high performance PM precision parts. In R. L. Orban (Ed.), Proceedings RoPM2005 (pp. 17–27). Romanian Powder Metallurgy Society. http://hdl.handle.net/20.500.12708/45152 ( reposiTUm)

Danninger, H., Gierl, C., & Vassileva, V. (2005). Asymmetry Effects in Ferrite-Austenite Transformation During Sintering of Carbon-Free Ferrous Alloys. In Proceedings EuroPM2005 (pp. 15–20). EPMA, Shrewsbury UK. http://hdl.handle.net/20.500.12708/45229 ( reposiTUm)

Vassileva, V., Danninger, H., Krecar, D., & Hutter, H. (2005). Effect of Phosphorus Addition on Microstructure and Impact Behavior of Cr-Mo Low Alloyed Steel. In Proceedings EuroPM2005 (pp. 53–58). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/45230 ( reposiTUm)

Gierl, C., & Danninger, H. (2005). Thermal Analysis of Plain Iron - The Effect of “Inert” Atmospheres. In Proceedings EuroPM2005 (pp. 3–8). EPMA, Shrewsbury UK. http://hdl.handle.net/20.500.12708/45231 ( reposiTUm)

Strobl, S., Kabatova, M., & Dudrova, E. (2005). Correlation between microstructure, mechanical properties and fracture of PM steels based on low-alloyed Fe-Cr-Mo powder. In A. Arvand & H. Danninger (Eds.), Proc. “PM Auto’05” (pp. 125–133). Mashad Powder Metallurgy Co. http://hdl.handle.net/20.500.12708/45126 ( reposiTUm)

Gierl, C., & Danninger, H. (2005). Formation of secondary cementite in sintered steels. In L. Parilak & H. Danninger (Eds.), Proceedings DFPM2005 (pp. 44–51). Slovak Academy of Sciences. http://hdl.handle.net/20.500.12708/45203 ( reposiTUm)

Azadbeh, M., Gierl, C., & Danninger, H. (2005). Influence of the Heat Treatment on Microstructure and Bending Strength of Cr Prealloyed PM Steels. In S. Saritas, M. Türker, & H. Arik (Eds.), Proceedings 4th Int. PM Conference (p. 11). Turkish Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/45427 ( reposiTUm)

Altena, H., & Danninger, H. (2005). Thermochemische Behandlung von Sinterstahl-Präzisionsteilen. In H. Kolaska (Ed.), Pulvermetallurgie in Wissenschaft und Praxis Bd. 21 (pp. 83–98). Heimdall-Verlag. http://hdl.handle.net/20.500.12708/45274 ( reposiTUm)

Danninger, H., Rouzbahani, F., Harold, C., Ponemayr, H., Daxelmüller, M., Simancik, F., & Izdinsky, K. (2005). Precipitation hardened carbon-free tool steels with high temper resistance. In G. Kneringer, P. Rödhammer, & H. Wildner (Eds.), Proceedings Vol.1: High Performance PM Materials (pp. 558–570). Plansee Holding AG. http://hdl.handle.net/20.500.12708/45144 ( reposiTUm)

Slesar, M., Dudrova, E., Sülleiova, K., & Danninger, H. (2002). Deformation and fracture processes in Fe-C systems sintered in nitrogen. In Deformation & Fracture in Structural PM Materials (pp. 47–58). Proceedings. http://hdl.handle.net/20.500.12708/45067 ( reposiTUm)

Strobl, S., & Danninger, H. (2002). PM Cellular Materials for Automotive Applications. In PM Auto ´02 (pp. 1–13). Proceedings. http://hdl.handle.net/20.500.12708/45063 ( reposiTUm)

Hemmatpour, Y., & Danninger, H. (2002). New Generation of High Density PM Steels Compared to Powder Forged Steels. In PM Auto ´02 (pp. 1–6). Proceedings. http://hdl.handle.net/20.500.12708/45064 ( reposiTUm)

Danninger, H., & Weiss, B. (2002). High Cycle Fatigue of Powder Metallurgy Materials. In PMS 2002 (pp. 195–204). Proceedings. http://hdl.handle.net/20.500.12708/45066 ( reposiTUm)

Danninger, H., & Leitner, G. (2002). In-situ characterization of sintering in ferrous compacts through thermal diffusivity measurements. In Adv. Powder Metall. & Partic. Mater. (pp. 13-157-13–167). Adv. Powder Metall. & Partic. Mater. http://hdl.handle.net/20.500.12708/45061 ( reposiTUm)

Danninger, H. (2002). Recent Progress in Automotive Powder Metallurgy. In PM Auto 02 (pp. 1–10). Proceedings. http://hdl.handle.net/20.500.12708/45062 ( reposiTUm)

Kremel, S., Danninger, H., & Yu, Y. (2002). Effect of carbothermic reduction of surface oxides on the mechanical behaviour of sintered steels prepared from Cr prealloyed powder. In Deformation & Fracture in Structural PM Materials (pp. 132–142). Proceedings. http://hdl.handle.net/20.500.12708/45068 ( reposiTUm)

Danninger, H., Kremel, S., Altena, H., & Yu, Y. (2002). Sintering and Properties of PM Steels Prepared from Pre-Alloyed Powder Astaloy CrM. In PM Auto 02 (pp. 1–12). Proceedings. http://hdl.handle.net/20.500.12708/45065 ( reposiTUm)

Book Contributions

de Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2021). Fundamentals of Sintering: Liquid Phase Sintering. In Encyclopedia of Materials: Metals and Alloys (pp. 481–492). Elsevier Inc. https://doi.org/10.1016/b978-0-12-819726-4.00127-7 ( reposiTUm)

Danninger, H., Calderon, R. de O., & Gierl-Mayer, C. (2017). Powder Metallurgy and Sintered Materials. In Ullmann’s Encyclopedia of Industrial Chemistry (pp. 1–57). Wiley-VCH. http://hdl.handle.net/20.500.12708/29529 ( reposiTUm)

Herwig, C. (2015). Christain Doppler-Labor für Mechanistische und Physiologische Methoden für leistungsfähigere Bioprozesse. In H. Danninger & P. Weinberger (Eds.), Die Fakultät für Technische Chemie (pp. 75–78). Böhlau Verlag. http://hdl.handle.net/20.500.12708/28809 ( reposiTUm)

Winter, F. (2015). Christain Doppler-Labor für Verfahrenstechnik bei hohen Temperaturen. In H. Danninger & P. Weinberger (Eds.), Die Fakultät für Technische Chemie (pp. 79–81). Böhlau Verlag. http://hdl.handle.net/20.500.12708/28808 ( reposiTUm)

Danninger, H., Gierl-mayer, C., & Strobl, S. (2013). Evolution of microstructure in ferrous and non-ferrous materials. In I. Chang & Y. Zhao (Eds.), Advances in Powder Metallurgy (pp. 308–357). Woodhead Publishing Ltd. https://doi.org/10.1533/9780857098900.2.308 ( reposiTUm)

Danninger, H., & Gierl-Mayer, C. (2013). Advanced powder metallurgy steel alloys. In I. Chang & Y. Zhao (Eds.), Advances in Powder Metallurgy (pp. 149–201). Woodhead Publishing Ltd. https://doi.org/10.1533/9780857098900.2.149 ( reposiTUm)

Gierl, C., & Danninger, H. (2010). Eisenpulvermetallurgie. In J. Kriegesmann (Ed.), Technische Keramische Werkstoffe - 116. Ergänzungslieferung (pp. 1–62). HvB Verlag. http://hdl.handle.net/20.500.12708/26843 ( reposiTUm)

Danninger, H. (2009). Pulvermetallurgische Leichtbauprodukte. In H.-P. Degischer & S. Lüftl (Eds.), Leichtbau: Prinzipien, Werkstoffauswahl und Fertigungsvarianten (pp. 191–214). Wiley-VCH. http://hdl.handle.net/20.500.12708/26614 ( reposiTUm)

Books

Broeckmann, C., Danninger, H., & Weißgärber, T. (Eds.). (2021). Band 36: Pulvermetallurgie - nachhaltige Lösungen und neue Märkte. Heimdall-Verlag. http://hdl.handle.net/20.500.12708/24869 ( reposiTUm)

Danninger, H., Sigl, L., & Schneider, M. (Eds.). (2019). Band 35: Pulvermetallurgie - Schlüsseltechnologie für innovative Systemlösungen. Heimdall-Verlag. http://hdl.handle.net/20.500.12708/24648 ( reposiTUm)

Danninger, H., Sigl, L., & Broeckmann, C. (Eds.). (2018). Band 34: Pulvermetallurgie - Neue Herausforderungen und neue Wege. Heimdall-Verlag. http://hdl.handle.net/20.500.12708/24498 ( reposiTUm)

Kolaska, H., Danninger, H., & Kieback, B. (Eds.). (2017). Band 33: Pulvermetallurgie - Schlüssel zur Mobilität. Heimdall-Verlag. http://hdl.handle.net/20.500.12708/24356 ( reposiTUm)

Kolaska, H., Danninger, H., & Biermann, D. (Eds.). (2016). Band 32: Zerspanung von und mit pulvermetallurgischen Werkstoffen. Heimdall-Verlag. http://hdl.handle.net/20.500.12708/24182 ( reposiTUm)

Gestrich, T., Danninger, H., & Kolaska, H. (Eds.). (2015). Band 31: Pulvermetallurgie: Effiziente Prozesse - besondere Eigenschaften. Heimdall-Verlag. http://hdl.handle.net/20.500.12708/24038 ( reposiTUm)

Danninger, H., & Weinberger, P. (Eds.). (2015). Technik für Menschen. Böhlau Verlag. http://hdl.handle.net/20.500.12708/24099 ( reposiTUm)

Danninger, H., Kestler, H., & Kolaska, H. (Eds.). (2014). Band 30: Neue Horizonte in der Pulvermetallurgie - Werkstoffe, Produkte und Verfahren. Fachverband Pulvermetallurgie. http://hdl.handle.net/20.500.12708/23868 ( reposiTUm)

Salak, A., Selecka, M., & Danninger, H. (2005). Machinability of powder metallurgy steels. Cambridge International Science Publishing. http://hdl.handle.net/20.500.12708/22252 ( reposiTUm)

Conference Proceedings

Broeckmann, C., Danninger, H., & Sigl, L. (Eds.). (2023). Pulvermetallurgie im Wandel, effizient und nachhaltig (Vol. 38). Heimdall Verlag. ( reposiTUm)

Broeckmann, C., Danninger, H., & Kaletsch, A. (Eds.). (2022). Pulvermetallurgie - vielfältige Prozesse und Werkstoffe : Vorträge und Ausstellerbeiträge des Hagener Symposiums am 24. und 25. November 2022 in Hagen (Vol. 37). Heimdall Verlag. http://hdl.handle.net/20.500.12708/152247 ( reposiTUm)

Presentations

Danninger, H. (2024, July 17). Low Alloy Steels [Conference Presentation]. EPMA Powder Metallurgy Summer School 2024, Alessandria, Italy. ( reposiTUm)

De Oro Calderon, R., Ettmayer, P., Kolaska, H., & Danninger, H. (2024, November 29). 100 Jahre Hartmetall – ein Rückblick [Conference Presentation]. Hagener Symposium 2024, Germany. http://hdl.handle.net/20.500.12708/207974 ( reposiTUm)

Hojati, M., Gierl-Mayer, C., & Danninger, H. (2024). Introduction Of Carbon Into Sintered Steels By Combining Graphite And Fe-C Masteral-loys [Conference Presentation]. Euro PM2024 Congress and Exhibition, Malmö, Sweden. https://doi.org/10.59499/EP246206688 ( reposiTUm)

Gierl-Mayer, C., & Danninger, H. (2024, October 2). Chromium And Tungsten Sulfides As Machining Aids In PM Steel [Conference Presentation]. Euro PM2024 Congress and Exhibition, Malmö, Sweden. https://doi.org/10.59499/EP246281579 ( reposiTUm)

Danninger, H. (2024, October 22). 45 Jahre Pulvermetallurgie – die unheilbare Krankheit Sinteritis [Conference Presentation]. XX. Internationales Kolloquium aus Metallographie und Werkstofftechnik – Widmanstätten-Tagung, Austria. ( reposiTUm)

Geroldinger, S., Hellein, R., Hojati, M., De Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2023, December 1). Rohstoffeffiziente Sinterstähle durch Hybrid-Masteralloylegierungstechnik [Conference Presentation]. 41. Hagener Symposium Pulvermetallurgie 2023, Hagen, Germany. ( reposiTUm)

De Oro Calderon, R., Hojati, M., Hellein, R., Geroldinger, S., Gierl-Mayer, C., & Danninger, H. (2023, October 4). Sustainable Hybrid Alloyed PM Steels [Conference Presentation]. EuroPM2023 Congress & Exhibition, Lissabon, Portugal. ( reposiTUm)

Marschnigg, S., Herzig, C., Limbeck, A., Danninger, H., Gierl-Mayer, C., Weirather, T., & Granzer, T. (2023, October 4). Analysis Of The Binder Element Content In The W Phase Of Tungsten Heavy Alloy [Conference Presentation]. EuroPM2023 Congress & Exhibition, Lissabon, Portugal. ( reposiTUm)

Momeni, M., Gimeno-Fabra Lluis, Danninger, H., & Gierl-Mayer, C. (2023, October 4). Ferrous Powders & Sintered Steels: An Overview of Granted Patents at the European Patent Office from 2015 to 202 [Conference Presentation]. EuroPM2023 Congress & Exhibition, Lissabon, Portugal. ( reposiTUm)

Gierl-Mayer, C., Geroldinger, S., De Oro Calderon, R., & Danninger, H. (2023, October 4). Comparison of Low Alloyed Cr-Mo PM Steels by Thermoanalytical Technique [Conference Presentation]. EuroPM2023 Congress & Exhibition, Portugal. ( reposiTUm)

Hojati, M., Gierl-Mayer, C., & Danninger, H. (2023, September 13). Impact fracture behaviour of powder metallurgy steels sintered at different temperatures [Conference Presentation]. 57. Metallographie-Tagung, Leoben, Leoben, Austria. ( reposiTUm)

Danninger, H. (2023, July 20). Low Alloy Steels [Conference Presentation]. EPMA Powder Metallurgy Summer School 2023, Germany. ( reposiTUm)

Danninger, H. (2022). Low Alloy Steels. 20th EPMA Powder Metallurgy Summer School, Ciudad Real, Spain. http://hdl.handle.net/20.500.12708/101776 ( reposiTUm)

Danninger, H. (2022). Plansee Seminars 1952-2022 - A view on a very special congress. 20. Plansee Seminar 2022, Reutte, Austria. http://hdl.handle.net/20.500.12708/101774 ( reposiTUm)

Danninger, H., Hojati, M., & Gierl-Mayer, C. (2022). Development of microstructure and properties in ferrous powder metallurgy compacts through different stages of sintering [Keynote Presentation]. ISNNM-2022 – 17th International Symposium on Novel and Nano Materials, Jeju, Korea (the Republic of). http://hdl.handle.net/20.500.12708/152404 ( reposiTUm)

Geroldinger, S., de Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2021). Enhanced distribution of alloying elements in PM steels by the use of tailored transient liquid phases. Online Conference EUROMAT 2021, Graz, Austria. http://hdl.handle.net/20.500.12708/101609 ( reposiTUm)

Danninger, H., Prokofyev, M., Gierl-Mayer, C., de Oro Calderon, R., Hellein, R., & Müller, A. (2021). TRIP behaviour of Mn alloyed sintered steels as a function of the carbon content. Online Conference EUROMAT 2021, Graz, Austria. http://hdl.handle.net/20.500.12708/101607 ( reposiTUm)

Gierl-Mayer, C., de Oro Calderon, R., & Danninger, H. (2021). Supersolidus sintering of PM carbon and low alloy steels for precision parts. Online Conference EUROMAT 2021, Graz, Austria. http://hdl.handle.net/20.500.12708/101608 ( reposiTUm)

Geroldinger, S., de Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2021). Tailored liquid phases for enhanced sintering of advanced PM-steels. Online Conference THERMEC’2021, Graz, Austria. http://hdl.handle.net/20.500.12708/101590 ( reposiTUm)

Danninger, H., de Oro Calderon, R., & Gierl-Mayer, C. (2021). The use of transient liquid phases in powder metallurgy. Online Conference THERMEC’2021, Graz, Austria. http://hdl.handle.net/20.500.12708/101589 ( reposiTUm)

Danninger, H., de Oro Calderon, R., & Gierl-Mayer, C. (2021). Thermoanalytical techniques for characterizing sintering processes in ferrous powder metallurgy. CEEC-TAC6 & Medicta2021, Split, Croatia. http://hdl.handle.net/20.500.12708/101599 ( reposiTUm)

Mikl, G., Höfler, T., Gierl-Mayer, C., Danninger, H., Linder, B., & Angeli, G. (2021). Scaling behaviour of Si-alloyed steel slabs under reheating conditions. Online Conference EUROMAT 2021, Graz, Austria. http://hdl.handle.net/20.500.12708/101604 ( reposiTUm)

Danninger, H., de Oro Calderon, R., Geroldinger, S., Gierl-Mayer, C., & Dunkley, J. J. (2020). The masteralloy concept for sintered steels - new impetus for a classical approach. Online Conference “ADEM 2020 - Advances in Engineering & Management,” Drobeta-Turnu Severin, Romania. http://hdl.handle.net/20.500.12708/101490 ( reposiTUm)

Geroldinger, S., de Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2020). Applying the masteralloy concept for manufacturing of sinter hardening PM steel grades. Online Conference “ADEM 2020 - Advances in Engineering & Management,” Drobeta-Turnu Severin, Romania. http://hdl.handle.net/20.500.12708/101491 ( reposiTUm)

Danninger, H., Gierl-Mayer, C., Prokofyev, M., de Oro Calderon, R., Geroldinger, S., Hellein, R., & Müller, A. (2020). Manganese - a Special Alloy Element in Sintered Steels. ISNNM2020 16th International Symposium on Novel and Nano Materials, Jeju, Korea (the Republic of). http://hdl.handle.net/20.500.12708/101466 ( reposiTUm)

Danninger, H. (2019). Low Alloy Steels. EPMA Powder Metallurgy Summer School 2019, Trento, Italy. http://hdl.handle.net/20.500.12708/101143 ( reposiTUm)

Danninger, H., de Oro Calderon, R., & Gierl-Mayer, C. (2019). Die Masteralloy-Route als Legierungsvariante für Sinterstähle - Sinterung und Wärmebehandlung. Werkstoffwoche 2019, Dresden, Germany. http://hdl.handle.net/20.500.12708/101167 ( reposiTUm)

Geroldinger, S., Gierl-Mayer, C., Danninger, H., & de Oro Calderon, R. (2019). Cr-Si-Fe-C und Mn-Si-Fe-C Masteralloys für legierte Sinterstähle mit durch Si und C gesteuerten Eigenschaften. Werkstoffwoche 2019, Dresden, Germany. http://hdl.handle.net/20.500.12708/101169 ( reposiTUm)

Mitterlehner, M., Danninger, H., & Gierl-Mayer, C. (2019). A novel method for describing the morphology of spreaded powder layers in direct laser meltig. AAMS2019 - Alloys for Additive Manufacturing Symposium 2019, Gothenburg, Sweden. http://hdl.handle.net/20.500.12708/101172 ( reposiTUm)

Pretterhofer, S., Danninger, H., & Gierl-Mayer, C. (2019). Sinterverhalten und Phasenentwicklung während des Walzens von Al-B4C-Pulvermaterial. Werkstoffwoche 2019, Dresden, Germany. http://hdl.handle.net/20.500.12708/101170 ( reposiTUm)

Calderon, R. de O., Dunkley, J. J., Geroldinger, S., Gierl-Mayer, C., & Danninger, H. (2019). Liquid phase design and novel atomization techniques offer new chances for the “masteralloy” concept. EuroMat 2019, Stockholm, Sweden. http://hdl.handle.net/20.500.12708/101227 ( reposiTUm)

Danninger, H., de Oro Calderon, R., & Gierl-Mayer, C. (2019). The effect of natural surface oxygen on sintering of metallic systems. 2019 Spring Meeting of Korean Powder Metallurgy Institute, Yeosu, Korea (the Republic of). http://hdl.handle.net/20.500.12708/101084 ( reposiTUm)

Gierl-Mayer, C., Jetzinger, M., Dunkley, J. J., & Danninger, H. (2018). C-Masteralloys - Can They Substitute Graphite in PM Steels. PM AUTO 2018 - 6th international Conference on Powder Metallurgy for Automotive Parts, Isfahan, Iran (Islamic Republic of). http://hdl.handle.net/20.500.12708/100682 ( reposiTUm)

Danninger, H. (2018). What will be the future of powder metallurgy? PM AUTO 2018 - 6th international Conference on Powder Metallurgy for Automotive Parts, Isfahan, Iran (Islamic Republic of). http://hdl.handle.net/20.500.12708/100683 ( reposiTUm)

Danninger, H. (2018). Perspectives of powder metallurgy in the 2020s. ADEM 2018 - 5th International Conference on Advances in Engineering and Management, Drobeta Turnu Severin, Romania. http://hdl.handle.net/20.500.12708/100764 ( reposiTUm)

Danninger, H. (2017). Advanced materials - a topic for industry-university cooperation. MIBA Convention 2017, Laakirchen, Austria. http://hdl.handle.net/20.500.12708/100453 ( reposiTUm)

Ouda, K., Danninger, H., & Gierl-Mayer, C. (2017). Magnetic measurement of retained austenite in sintered steels-benefits and limitations. RoPM-AM2017 - 5th Int. Conf. on Powder Metallurgy & Advanced Materials, Cluj-Napoca, Romania. http://hdl.handle.net/20.500.12708/100342 ( reposiTUm)

Danninger, H. (2017). PM Low Alloyed Steels. EPMA Powder Metallurgy Summer School 2017, Grenoble, France. http://hdl.handle.net/20.500.12708/100331 ( reposiTUm)

Danninger, H., de Oro Calderon, R., & Gierl-Mayer, C. (2017). Chemical reactions during sintering of PM steel compacts as a function of the alloying route. RoPM-AM2017 - 5th Int. Conf. on Powder Metallurgy & Advanced Materials, Cluj-Napoca, Romania. http://hdl.handle.net/20.500.12708/100362 ( reposiTUm)

Mitterlehner, M., Gierl-Mayer, C., Danninger, H., Leitner, H., & Wallner, S. (2017). Fließverhalten von inertgasverdüsten Pulvern für das Additive Manufacturing. Werkstoffwoche 2017, Dresden, Germany. http://hdl.handle.net/20.500.12708/100361 ( reposiTUm)

Marschnigg, S., Gierl-Mayer, C., Danninger, H., Weirather, T., Granzer, T., & Zobl, P. (2017). Zerstörungsfreie Qualitätsprüfung von Wolfram-Schwermetallen über die magnetische Sättigung. Werkstoffwoche 2017, Dresden, Germany. http://hdl.handle.net/20.500.12708/100360 ( reposiTUm)

Danninger, H., de Oro Calderon, R., & Gierl-Mayer, C. (2017). Die Chemie beim Sintern von metallischen Mehrkomponentensystemen. Werkstoffwoche 2017, Dresden, Germany. http://hdl.handle.net/20.500.12708/100359 ( reposiTUm)

Danninger, H. (2017). Wohin steuert die Pulvermetallurgie? Werkstoffwoche 2017, Dresden, Germany. http://hdl.handle.net/20.500.12708/100358 ( reposiTUm)

Danninger, H., & Dlapka, M. (2017). Wärmebehandlung von Sinterstahl-Präzisionsteilen - was ist anders? HK 2017 - HärtereiKongress / HeatTreatmentCongress, Köln, Germany. http://hdl.handle.net/20.500.12708/100374 ( reposiTUm)

Gierl-Mayer, C., Ouda, K., & Danninger, H. (2017). Measuring the content of retained austenite in differently alloyed steels through magnetic saturation. DF PM 2017 - Int. Conf. Deformation and Fracture in PM Materials, Stara Lesna, Slovakia. http://hdl.handle.net/20.500.12708/100376 ( reposiTUm)

Danninger, H., Vassileva, V., & Gierl-Mayer, C. (2017). Embrittling components in sintered steels: Comparison of phosphorus and boron. DF PM 2017 - Int. Conf. Deformation and Fracture in PM Materials, Stara Lesna, Slovakia. http://hdl.handle.net/20.500.12708/100375 ( reposiTUm)

Calderon, R. de O., Gierl-Mayer, C., & Danninger, H. (2017). La “química” de la sinterización: reacciones con la atmosfera y mecanismos de transferencia de oxígeno. VI Congreso de Pulvimetalurgia, I Congreso Iberoamericano de Pulvimetalurgia, Ciudad Real, Spain. http://hdl.handle.net/20.500.12708/100419 ( reposiTUm)

Danninger, H., de Oro Calderon, R., & Gierl-Mayer, C. (2017). Reactions during sintering of metallic compacts that involve interstitial elements. “Sintering 2017” International Conference on Sintering, San Diego, United States of America (the). http://hdl.handle.net/20.500.12708/100387 ( reposiTUm)

Calderon, R. de O., Gierl-Mayer, C., & Danninger, H. (2017). Master Alloys for introducing Alloying Elements in Low-Alloy steels: New Concepts and Possibilities. JSPM International Conference on Powder and Powder Metallurgy ~ 60th Anniversary ~ (JSPMIC2017), Kyoto, Japan. http://hdl.handle.net/20.500.12708/100420 ( reposiTUm)

de Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2016). Masteralloys as a route for introducing oxygen-sensitive elements into sintered steels. Sitzung ASMET (The Austrian Sociaety for Metallurgy and Materials) -Fachausschuss Pulvermetallurgie, Plansee SE, Reutte, Austria. http://hdl.handle.net/20.500.12708/100069 ( reposiTUm)

Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2016). Sintering PM-Steels Containing Oxidation-Sensitive Elements: Chances and Challenges of the Master Alloy Approach. PowderMet2016, Boston, United States of America (the). http://hdl.handle.net/20.500.12708/100061 ( reposiTUm)

Danninger, H. (2016). PM low alloyed steels. EPMA Powder Metallurgy Summer School 2016, Valencia, Spain. http://hdl.handle.net/20.500.12708/99979 ( reposiTUm)

Gianessi, A., Gierl-Mayer, C., & Danninger, H. (2015). Bimodal particle reinforcement for wear resistant powder metallurgy steels. 20. Symposium Verbundwerkstoffe und Werkstoffverbunde, Wien, Austria. http://hdl.handle.net/20.500.12708/99656 ( reposiTUm)

Danninger, H., Betzwar Kotas, A., & Weiss, B. (2015). Gigacycle fatigue behaviour of sintered WC-Co hardmetals investigated by ultrasonic resonance testing. 20. Symposium Verbundwerkstoffe und Werkstoffverbunde, Wien, Austria. http://hdl.handle.net/20.500.12708/99658 ( reposiTUm)

Lugbauer, M., Danninger, H., & Zbiral, J. (2015). Der Einfluss von Verunreinigungen auf die Materialqualität von gesinterten Fe-Basis-Verschleißschutzschichten. 20. Symposium Verbundwerkstoffe und Werkstoffverbunde, Wien, Austria. http://hdl.handle.net/20.500.12708/99657 ( reposiTUm)

Gierl-Mayer, C., Bauer, V., Limbeck, A., & Danninger, H. (2015). Chemische Analyse von pulvermetallurgischen Werkstoffen mittels LaserAblation‐ICP‐MS. ASMET-Fachausschuß Pulvermetallurgie - Jahrestreffen 2015, Wien, Austria. http://hdl.handle.net/20.500.12708/99622 ( reposiTUm)

Kuzmanovic, J., Gierl-Mayer, C., & Danninger, H. (2015). Aluminiumpulverspritzguß - Einflüsse der Chemie im Bulk und an der Oberfläche. ASMET-Fachausschuß Pulvermetallurgie - Jahrestreffen 2015, Wien, Austria. http://hdl.handle.net/20.500.12708/99621 ( reposiTUm)

de Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2015). Atmosphere effects on sintering of steels containing oxygen-sensitive alloying elements. CEEC-TAC3, Ljubljana, Slovenia. http://hdl.handle.net/20.500.12708/99827 ( reposiTUm)

de Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2015). Master Alloys in Powder Metallurgy: the Challenge of exploring New Alloying Compositions. AMPT 2015, Madrid, Spain. http://hdl.handle.net/20.500.12708/99828 ( reposiTUm)

Gierl-Mayer, C., & Danninger, H. (2015). “Internes Gettern” beim Sintern von Preßlingen aus vorlegierten Pulvern. Werkstoffwoche 2015, Dresden, Germany. http://hdl.handle.net/20.500.12708/99698 ( reposiTUm)

Danninger, H., Weiss, B., Betzwar Kotas, A., Khatibi, G., Sohar, C., & Dlapka, M. (2015). Fractography of Cyclically Loaded Sintered Materials. Workshop “Fractography of Sintered Materials - Principles and Application,” Kosice, Slovakia. http://hdl.handle.net/20.500.12708/99605 ( reposiTUm)

Danninger, H. (2015). Sinterstahl-Formteile - Eigenschaften und Anwendungen. DGM-Fortbildungsseminar “Pulvermetallurgie” 2015, Dresden, Germany. http://hdl.handle.net/20.500.12708/99620 ( reposiTUm)

Gierl-Mayer, C., Bauer, V., Limbeck, A., & Danninger, H. (2014). Analysis of PM-steels containing boron with laser ablation-inductively coupled plasma mass spectrometry. “DFPM 2014” International Conference on Deformation and Fracture of PM Materials, Stara Lesna, Slovakia. http://hdl.handle.net/20.500.12708/99442 ( reposiTUm)

Danninger, H., & Gierl-Mayer, C. (2014). Chemistry of Sintering - often neglected but decisive. International Conference on Sintering 2014, Dresden, Germany. http://hdl.handle.net/20.500.12708/99395 ( reposiTUm)

Danninger, H. (2014). PM Steels I. EPMA Powder Metallurgy Summer School 2014, Krakau, Poland. http://hdl.handle.net/20.500.12708/99363 ( reposiTUm)

Danninger, H., Gierl-Mayer, C., & Jaliliziyaeian, M. (2014). Effect of phosphorus addition on the impact fracture behaviour of Cr-Mo prealloyed sintered steels. “DFPM 2014” International Conference on Deformation and Fracture of PM Materials, Stara Lesna, Slovakia. http://hdl.handle.net/20.500.12708/99444 ( reposiTUm)

Gierl-Mayer, C., Jaliliziyaeian, M., Danninger, H., & Dudrova, E. (2014). Impact behaviour of sintered steels prepared from manganese prealloyed powders. “DFPM 2014” International Conference on Deformation and Fracture of PM Materials, Stara Lesna, Slovakia. http://hdl.handle.net/20.500.12708/99443 ( reposiTUm)

Danninger, H., Gierl-Mayer, C., de Oro Calderon, R., & Hryha, E. (2014). Oxygen transfer in mixed and prealloyed ferrous powder compacts during sintering. International Conference on Sintering 2014, Dresden, Germany. http://hdl.handle.net/20.500.12708/99396 ( reposiTUm)

Gierl-Mayer, C., & Danninger, H. (2014). Approach to identify the reaction mechanisms of carbothermic surface reduction during sintering of PM steels. International Conference on Sintering 2014, Dresden, Germany. http://hdl.handle.net/20.500.12708/99397 ( reposiTUm)

Danninger, H., & Gierl, C. (2013). Sintering atmospheres. PM Sintering Short Course - Advanced Processes and Materials, Wien, Austria. http://hdl.handle.net/20.500.12708/99028 ( reposiTUm)

Calderon, R. de O., Gierl-Mayer, C., & Danninger, H. (2013). The Challenge of Sintering Steels with New Alloying Compositions. 12. Sitzung des Expertenkreises “Sintern”:Gemeinschaftsausschuss Pulvermetallurgie Expertenkreis “Sintern,” Wien, Austria. http://hdl.handle.net/20.500.12708/100066 ( reposiTUm)

Danninger, H., Xu, C., Sohar, C., Weiss, B., Betzwar-Kotas, A., & Khatibi, G. (2013). Fatigue properties of ferrous PM materials in the gigacycle range. APMA 2013 - 2nd International Conference on Powder Metallurgy in Asia, Xiamen, China. http://hdl.handle.net/20.500.12708/99132 ( reposiTUm)

Danninger, H., & Gierl-Mayer, C. (2013). Sintern - mehr als Festphasendiffusion. Werkstoffsymposium “Pulvermetallurgie in Dresden - gestern, heute, morgen,” Dresden, Germany. http://hdl.handle.net/20.500.12708/99074 ( reposiTUm)

Danninger, H. (2013). PM Steels II. EPMA Powder Metallurgy Summer School 2013, Trento, Italy. http://hdl.handle.net/20.500.12708/99075 ( reposiTUm)

Zikin, A., Edtmaier, C., Danninger, H., Badisch, E., & Winkelmann, H. (2012). Deposition of modified WC/W2C hard particles using PTA welding Technology. 20th Congress IFHTSE - Internat. Federation for Heat Treatment and Surface Engineering, Peking, China. http://hdl.handle.net/20.500.12708/98840 ( reposiTUm)

Auinger, M., Borodin, S., Holzweber, M., Praig, V. G., Danninger, H., & Rohwerder, M. (2012). Experimental Studies and Theoretical Calculations on the Formation of Nitrides and Oxides during Selevtive Oxidation in Binary Iron Alloys. 8th International Symposium on High-Temperature Corrosion and Protection of Materials, France. http://hdl.handle.net/20.500.12708/98996 ( reposiTUm)

Auinger, M., Vogel, A., Vogel, D., Praig, V. G., Danninger, H., & Rohwerder, M. (2012). Decarburisation in Steels at Elevated Temperatures - Experimental Observation by in-situ Mass Spectrometry and Theoretical Calculations. 8th International Symposium on High-Temperature Corrosion and Protection of Materials, France. http://hdl.handle.net/20.500.12708/98997 ( reposiTUm)

Auinger, M., Vogel, A., Vogel, D., Praig, V. G., Holzweber, M., Danninger, H., & Rohwerder, M. (2012). Internal Oxidation In Iron Based Model Alloys and Oxygen Isotope Distribution at High Temperatures. 8th International Symposium on High-Temperature Corrosion and Protection of Materials, France. http://hdl.handle.net/20.500.12708/98998 ( reposiTUm)

Danninger, H., & Gierl, C. (2012). Sinterstahl-Formteile - neue Werkstoffe für eine bewährte Technologie. Werkstoffsymposium “20 Jahre Fraunhofer IFAM Dresden,” Dresden, Germany. http://hdl.handle.net/20.500.12708/98774 ( reposiTUm)

Danninger, H. (2012). PM Steels 1. EPMA Powder Metallurgy Summer School 2012, San Sebastian/Donostia, Spain. http://hdl.handle.net/20.500.12708/98775 ( reposiTUm)

Danninger, H., Gierl, C., Avakemian, A., Synek, J., Zlatkov, B. S., Arzl, A., Ter Maat, J., & Neubing, H. C. (2012). Pulverspritzguss von Aluminiumlegierungen - Einfluss der Interstitials. Expertenkreis Metallpulverspritzguss - Frühjahrssitzung, Furtwangen, Germany. http://hdl.handle.net/20.500.12708/98743 ( reposiTUm)

Gierl, C., Danninger, H., Avakemian, A., Synek, J., Zlatkov, B. S., Arzl, A., Ter Maat, J., & Neubing, H. C. (2011). Pulverspritzguss von Aluminiumlegierungen - Rolle der Interstitials. ASMET-Fachausschuss Pulvermetallurgie - Jahrestreffen 2011, Velden, Austria. http://hdl.handle.net/20.500.12708/98512 ( reposiTUm)

Danninger, H. (2011). PM Low Alloyed Steels 2. EPMA Powder Metallurgy Summer School 2011, Dresden, Germany. http://hdl.handle.net/20.500.12708/98521 ( reposiTUm)

Danninger, H., Gierl, C., Avakemian, A., Synek, J., Zlatkov, B. S., Arzl, A., ter Maat, J., & Neubing, H. C. (2011). Grundlagenuntersuchungen zum Pulverspritzguss von Aluminiumlegierungen. Expertenkreis PM-Aluminium - Jahressitzung 2011, Dresden, Germany. http://hdl.handle.net/20.500.12708/98488 ( reposiTUm)

Danninger, H. (2010). Teaching of materials science and engineering - the chemistry approach. Jornada: 50 anos de docencia de materiales in Andalucia / workshop: 50 teaching years in materials engineering in Andalusia, Sevilla, EU. http://hdl.handle.net/20.500.12708/98454 ( reposiTUm)

Danninger, H. (2010). PM Low Alloyed Steels 2. EPMA Powder Metallurgy Summer School 2010, Madrid-Leganes, EU. http://hdl.handle.net/20.500.12708/98358 ( reposiTUm)

Danninger, H. (2010). Liquid Phase Sintering. EPMA Powder Metallurgy Summer School 2010, Madrid-Leganes, EU. http://hdl.handle.net/20.500.12708/98357 ( reposiTUm)

Ul Mohsin, I., Lager, D., Danninger, H., Hohenauer, W., & Gierl, C. (2009). Thermo-kinetics study of MIM thermal debinding using TGA coupled with FTIR and mass spectrometry. Asianalysis X - 10th Asian Conference on Analytical Sciences, Kuala Lumpur, Malaysia, Non-EU. http://hdl.handle.net/20.500.12708/98064 ( reposiTUm)

Danninger, H. (2009). Sinterstahl-Formteile - der Weg zu höchster Belastbarkeit. FH Wels - Vorlesungsreihe “Neue Trends aus Praxis und Wissenschaft,” Wels, Austria. http://hdl.handle.net/20.500.12708/98001 ( reposiTUm)

Danninger, H., Sohar, C., Gierl, C., Betzwar-Kotas, A., & Weiss, B. (2009). Gigacycle fatigue response of PM versus ingot metallurgy tool steels. RoPM 2009 - 4th International Conference on Powder Metallurgy, Craiova, Romania, EU. http://hdl.handle.net/20.500.12708/98031 ( reposiTUm)

Danninger, H., Jaliliziyaeian, M., Gierl, C., & Bengtsson, S. (2009). Chemical reactions during sintering of Mn and Mn-Cr prealloyed steels in inert versus reducing atmospheres. RoPM 2009 - 4th International Conference on Powder Metallurgy, Craiova, Romania, EU. http://hdl.handle.net/20.500.12708/98030 ( reposiTUm)

Zlatkov, B. S., Loibl, H. M., Danninger, H., Maricic, A., & Mitrovic, N. (2009). The influence of thermal treatments on magnetic properties of MnZn ferrites prepared by PIM technology. YUCOMAT 2009, Herceg Novi, Montenegro, Non-EU. http://hdl.handle.net/20.500.12708/98059 ( reposiTUm)

Danninger, H. (2009). Liquid Phase Sintering. EPMA Powder Metallurgy Summer School, Kosice, Slovakia, EU. http://hdl.handle.net/20.500.12708/98024 ( reposiTUm)

Danninger, H. (2009). PM Low Alloyed Steels II. EPMA Powder Metallurgy Summer School, Kosice, Slovakia, EU. http://hdl.handle.net/20.500.12708/98025 ( reposiTUm)

Danninger, H. (2009). Neuentwicklungen in der Pulvermetallurgie für Formteile und Werkzeuge. CERAMITEC Forum 2009, München, EU. http://hdl.handle.net/20.500.12708/98081 ( reposiTUm)

Danninger, H. (2009). Expertenkreise als Innovationsquelle im Gemeinschaftsausschuss Pulvermetallurgie. CERAMITEC Forum 2009, München, EU. http://hdl.handle.net/20.500.12708/98082 ( reposiTUm)

Danninger, H., Harold, C., Gierl, C., Ponemayr, H., Daxelmüller, M., Simancik, F., & Izdinsky, K. (2009). Powder metallurgy manufacturing of carbon-free precipitation hardened high speed steels. YUCOMAT 2009, Herceg Novi, Montenegro, Non-EU. http://hdl.handle.net/20.500.12708/98058 ( reposiTUm)

Sohar, C., Betzwar-Kotas, A., Gierl, C., Weiss, B., & Danninger, H. (2008). Fractographic evaluation and fracture mechanical considerations for a cold-work tool steel. 19th Colloquium on Fatigue Mechanisms, Dresden, EU. http://hdl.handle.net/20.500.12708/97744 ( reposiTUm)

Danninger, H. (2008). Hochbelastete Sinterstahl-Formteile - Werkstoffe und Verfahren. FH Wels - Vorlesungsreihe “Neue Trends aus Praxis und Wissenschaft,” Wels, Austria. http://hdl.handle.net/20.500.12708/97745 ( reposiTUm)

Sohar, C., Betzwar-Kotas, A., Gierl, C., Weiss, B., & Danninger, H. (2008). Einsatz physikalischer Analysemethoden bei der Untersuchung des Ermüdungsverhaltens von Werkzeugstählen. 4. ASAC JunganalytikerInnen Forum, Wien, Austria. http://hdl.handle.net/20.500.12708/97786 ( reposiTUm)

Sohar, C., Betzwar-Kotas, A., Gierl, C., Weiss, B., & Danninger, H. (2008). Schwingfestigkeit von erschmolzenen und pulvermetallurgischen Werkzeugstählen im Gigacycle-Bereich. Sitzung ASMET-Fachausschuss Pulvermetallurgie, Wien, Austria. http://hdl.handle.net/20.500.12708/97788 ( reposiTUm)

Ul Mohsin, I., Gierl, C., & Danninger, H. (2008). Distortion Investigation during Sintering of Copper PIM Parts. Junior Scientist Conference 2008, Vienna, Austria. http://hdl.handle.net/20.500.12708/97860 ( reposiTUm)

Azadbeh, M., Danninger, H., & Gierl, C. (2008). Study on the interparticle bonding of double pressed PM alloy steels. “DF PM 2008” Int. Conf. Deformation and Fracture in Structural PM Materials, Stara Lesna, Slovakia, EU. http://hdl.handle.net/20.500.12708/97837 ( reposiTUm)

Jaliliziyaeian, M., Gierl, C., Danninger, H., & Dudrova, E. (2008). Fracture surfaces studied on PM steels prepared from prealloyed steel powders sintered in different atmospheres. “DF PM 2008” Int. Conf. Deformation and Fracture in Structural PM Materials, Stara Lesna, Slovakia, EU. http://hdl.handle.net/20.500.12708/97838 ( reposiTUm)

Momeni, M., Gierl, C., & Danninger, H. (2008). Ratio tensile strength - Vickers hardness in sintered steels as a function of the sintering temperature. “DF PM 2008” Int. Conf. Deformation and Fracture in Structural PM Materials, Stara Lesna, Slovakia, EU. http://hdl.handle.net/20.500.12708/97841 ( reposiTUm)

Danninger, H., & Weiss, B. (2008). Design and Capabilities of PM Components and Materials: Fatigue Behaviour. Powder Metallurgy Training Courses 2008, Acqui Terme, Italia, EU. http://hdl.handle.net/20.500.12708/97800 ( reposiTUm)

Danninger, H. (2008). Sintered steels - how to get extra long fatigue life. Höganäs Chair Seminar 2008 “The materials development influence in the PM industry, from end-users to R&D,” Madrid, EU. http://hdl.handle.net/20.500.12708/97814 ( reposiTUm)

Sohar, C., Betzwar-Kotas, A., Gierl, C., Weiss, B., & Danninger, H. (2008). Gigacycle fatigue fractography of cold work tool steel produced by PM compared to ingot metallurgy. “DF PM 2008” Int. Conf. Deformation and Fracture in Structural PM Materials, Stara Lesna, Slovakia, EU. http://hdl.handle.net/20.500.12708/97840 ( reposiTUm)

Gierl, C., Ul Mohsin, I., & Danninger, H. (2008). Boron activated sintering of PM steels - alternative boron sources. “DF PM 2008” Int. Conf. Deformation and Fracture in Structural PM Materials, Stara Lesna, Slovakia, EU. http://hdl.handle.net/20.500.12708/97839 ( reposiTUm)

Danninger, H. (2007). Fatigue properties of sintered steels in the high cycle range. Höganäs Chair Seminar 2007 “A Look at the PM Industry with an End-User Perspective,” Trento, Italia, EU. http://hdl.handle.net/20.500.12708/97482 ( reposiTUm)

Danninger, H. (2007). New Alloying Systems for Sintered Steels. EPMA Powder Metallurgy Training Courses 2007, Kosice, Slovakia, EU. http://hdl.handle.net/20.500.12708/97500 ( reposiTUm)

Danninger, H. (2007). Liquid Phase Sintering. EPMA Powder Metallurgy Training Courses 2007, Kosice, Slovakia, EU. http://hdl.handle.net/20.500.12708/97499 ( reposiTUm)

Zlatkov, B. S., Loibl, H. M., Aleksic, O. S., & Danninger, H. (2007). Recent Advances in PIM Technology. FITEM ’07 - VII Scientific Meeting Physics and Technology of Materials, Cacak, Serbia, Non-EU. http://hdl.handle.net/20.500.12708/97518 ( reposiTUm)

Danninger, H., & Gierl, C. (2007). New Alloying Systems for Ferrous Powder Metallurgy Precision Parts. FITEM ’07 - VII Scientific Meeting Physics and Technology of Materials, Cacak, Serbia, Non-EU. http://hdl.handle.net/20.500.12708/97517 ( reposiTUm)

Danninger, H. (2007). Sinterstahl-Formteile. DGM-Fortbildungsseminar “Pulvermetallurgie,” Dresden, EU. http://hdl.handle.net/20.500.12708/97543 ( reposiTUm)

Sohar, C., Betzwar-Kotas, A., Gierl, C., Weiss, B., & Danninger, H. (2007). Influence of surface residual stresses on gigacycle failure response of cold work tool steel. 18th Colloquium on Fatigue Mechanisms, Poitiers, France, EU. http://hdl.handle.net/20.500.12708/97555 ( reposiTUm)

Danninger, H. (2006). Verbindung von Sinteraluminium und Stahl durch Sinterlöten. 5. Sitzung Deutscher Expertenkreis PM-Aluminium, Dresden, EU. http://hdl.handle.net/20.500.12708/97311 ( reposiTUm)

Altena, H., & Danninger, H. (2006). Improving the wear resistance of sintered steels by adapted thermochemical treatment. Höganäs Chair Seminar 2006 “Wear and Machinability,” Kosice, Slovakia, EU. http://hdl.handle.net/20.500.12708/97265 ( reposiTUm)

Danninger, H., & Gierl, C. (2006). Sintering of low-alloy steels - surface-atmosphere interactions and microstructural homogenization. Primer Congreso Espanol de Pulvimetalurgia, Leganes-Madrid, EU. http://hdl.handle.net/20.500.12708/97279 ( reposiTUm)

Krecar, D., Vassileva, V., Danninger, H., & Hutter, H. (2005). SIMS Investigations on Sintered Steels. 13. Tagung Festkörperanalytik, Chemnitz, Austria. http://hdl.handle.net/20.500.12708/97222 ( reposiTUm)

Danninger, H. (2005). PKW-Zahnriemenräder aus teilchenverstärkten Aluminiumlegierungen. 3. Sitzung Deutscher Expertenkreis PM-Aluminium, Darmstadt, Austria. http://hdl.handle.net/20.500.12708/96909 ( reposiTUm)

Danninger, H. (2005). New sintered steels and compositions. EPMA Powder Metallurgy Summer School 2005, Aachen, Austria. http://hdl.handle.net/20.500.12708/96849 ( reposiTUm)

Danninger, H. (2005). Very high cycle fatigue. EPMA Powder Metallurgy Training Course “Fatigue,” Aachen, Austria. http://hdl.handle.net/20.500.12708/96850 ( reposiTUm)

Danninger, H. (2005). Mn, Cr, and Mo as admixed alloying elements in sintered steels. Höganäs Chair Seminar 2005 “Reserach and Technological Drivers for Future Low-Alloyed PM Steels,” Wien, Austria. http://hdl.handle.net/20.500.12708/96824 ( reposiTUm)

Danninger, H. (2005). High density - impact on microstructure and properties. Höganäs Chair Seminar 2005 “Reserach and Technological Drivers for Future Low-Alloyed PM Steels,” Wien, Austria. http://hdl.handle.net/20.500.12708/96825 ( reposiTUm)

Danninger, H., & Weiss, B. (2004). Ultrasonic High Cycle Fatigue Behaviour of Sintered Iron and Steels. Höganäs Chair Technical Seminar 2004, Mölle (Sweden), Mölle, Austria. http://hdl.handle.net/20.500.12708/96678 ( reposiTUm)

Danninger, H., & Weiss, B. (2004). Fatigue behaviour in high density PM steels. Höganäs Chair Seminar 2004, Leganes-Madrid (Spain), Austria. http://hdl.handle.net/20.500.12708/96680 ( reposiTUm)

Danninger, H. (2004). Sintering behaviour of systems with high green density. Höganäs Chair Seminar 2004, Leganes-Madrid (Spain), Austria. http://hdl.handle.net/20.500.12708/96679 ( reposiTUm)

Krecar, D., Vassileva, V., Danninger, H., & Hutter, H. (2004). Untersuchung von Sinteraktivatoren in PM Stählen mittels SIMS. 50. Metallkunde-Kolloquium, Lech am Arlberg, Austria. http://hdl.handle.net/20.500.12708/96613 ( reposiTUm)

Danninger, H. (2003). Quantitative Fractography as a Tool for Characterization of Sintered Steels. Höganäs Chair Seminar 2003 “High Performance Sintered Steels - Microstructural Impact,” Wien, Austria. http://hdl.handle.net/20.500.12708/96221 ( reposiTUm)

Danninger, H. (2002). Basic Principles of Binders and Lubricants. International Workshop “Understanding Binders and Lubricants in Powder Processing,” Baden, Austria, Austria. http://hdl.handle.net/20.500.12708/95840 ( reposiTUm)

Danninger, H. (2002). Neue Techniken zur Herstellung und Charakterisierung hochfester Sinterformteile. XII. Metallographisches Kolloquium - Widmanstättentagung, Linz, Austria, Austria. http://hdl.handle.net/20.500.12708/95842 ( reposiTUm)

Danninger, H. (2002). Processing and Properties of High Strength Sintered Steels. 2002 EPMA Powder Metallurgy Summer School, Baden, Austria, Austria. http://hdl.handle.net/20.500.12708/95841 ( reposiTUm)

Danninger, H. (2002). Carburizing of Sintered Steels. Höganäs Chair Seminar “Secondary Operations,” Trento / Italy, Austria. http://hdl.handle.net/20.500.12708/95843 ( reposiTUm)

Reports

Dlapka, M., Danninger, H., & Gierl, C. (2010). Sinterhardening grade steels with sufficient toughness for synchronizer hub applications, Part 6 (No. 6). http://hdl.handle.net/20.500.12708/36635 ( reposiTUm)

Dlapka, M., Danninger, H., & Gierl, C. (2010). Sinterhardening grade steels with sufficient toughness for synchronizer hub applications, Part 5 (No. 5). http://hdl.handle.net/20.500.12708/36634 ( reposiTUm)

Jaliliziyaeian, M., Danninger, H., & Gierl, C. (2008). Sintering and properties of compacts prepared from sponge and atomized iron powders and pre-alloy (Fe-1.8%Mn) powder with addition of 0.8%C. http://hdl.handle.net/20.500.12708/32724 ( reposiTUm)

Dlapka, M., Gierl, C., & Danninger, H. (2008). Sinterhardening grade steels with sufficient toughness for synchronizer hub application, Part 1 (Höganäs Chair IV-1). http://hdl.handle.net/20.500.12708/35299 ( reposiTUm)

Jaliliziyaeian, M., Danninger, H., & Gierl, C. (2007). Thermoanalytical study on the sintering of Höganäs powders A - G + 0.8%C. http://hdl.handle.net/20.500.12708/32714 ( reposiTUm)

Special Contributions

Danninger, H. (2021). A “hidden champion” of PM: Celebrating a century of innovation and success at Plansee. Powder Metallurgy Review, 10(3), 69–79. http://hdl.handle.net/20.500.12708/137912 ( reposiTUm)

de Oro Calderon, R., Dunkley, J. J., Gierl-Mayer, C., & Danninger, H. (2019). New opportunities for master alloys: Ultra high pressure water atomized powders. Powder Metallurgy Review, 8(1), 55–66. http://hdl.handle.net/20.500.12708/142709 ( reposiTUm)

de Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2016). The master alloy route: Introducing attractive alloying elements in Powder Metallurgy steels. Powder Metallurgy Review, 5(3), 86–96. http://hdl.handle.net/20.500.12708/149374 ( reposiTUm)