Lederer, M., Gökdeniz, Z., Khatibi, G., & Nicolics, J. (2021). Constitutive equations for strain rate and temperature dependent mechanical behaviour of porous Ag-sintered joints in electronic packages. Microelectronics Reliability, 126(114209), 114209. https://doi.org/10.1016/j.microrel.2021.114209 ( reposiTUm)

Lederer, M., Gökdeniz, Z. G., Khatibi Damavandi, G., & Nicolics, J. (2021). Constitutive equations for strain rate and temperature dependent mechanical behaviour of porous Ag-sintered joints in electronic packages. Microelectronics Reliability, 126, 1–7. https://doi.org/10.1016/j.microrel.2021.114209 ( reposiTUm)

Nicolics, J., Fulmek, P. L., Nemitz, W., & Wenzl, F.-P. (2018). Analysis of the local temperature distribution in color conversion Analysis of the local temperature distribution in color conversion. International Journal of Heat and Mass Transfer, 116, 1076–1107. https://doi.org/10.1016/j.ijheatmasstransfer.2017.09.088 ( reposiTUm)

Suhir, E., Ghaffarian, R., Yi, S., & Nicolics, J. (2017). Assessed interfacial strength and elastic moduli of the bonding material from shear-off test data. Journal of Materials Science: Materials in Electronics, 28(9), 6794–6799. https://doi.org/10.1007/s10854-017-6376-x ( reposiTUm)

Mazloum Nejadari, A., Khatibi, G., Czerny, B., Lederer, M., Nicolics, J., & Weiss, L. (2017). Reliability of Cu wire bonds in microelectronic packages. Microelectronics Reliability, 74(1), 147–154. http://hdl.handle.net/20.500.12708/147408 ( reposiTUm)

Fulmek, P. L., Haumer, P., Wenzl, F. P., Nemitz, W., & Nicolics, J. (2017). Time dependent and temperature dependent properties of the forward voltage characteristic of InGaN high power LEDs. AIP Advances, 7(3), 035206. https://doi.org/10.1063/1.4978265 ( reposiTUm)

Nemitz, W., Fulmek, P., Nicolics, J., Reil, F., & Wenzl, F. P. (2017). On the determination of the temperature distribution within the color conversion elements of phosphor converted LEDs. Scientific Reports, 7(9964). https://doi.org/10.1038/s41598-017-10114-6 ( reposiTUm)

Fulmek, P. L., Nicolics, J., Nemitz, W., & Wenzl, F.-P. (2017). On the impact of the temperature dependency of the phosphor quantum efficiency on correlated color temperature stability in phosphor converted LEDs. Materials Chemistry and Physics: Including Materials Science Communications, 196, 82–91. http://hdl.handle.net/20.500.12708/147441 ( reposiTUm)

Artner, G., Gentner, P. K., Nicolics, J., & Mecklenbräuker, C. (2017). Carbon Fiber Reinforced Polymer with Shredded Fibers: Quasi-Isotropic Material Properties and Antenna Performance. International Journal of Antennas and Propagation, 2017, 1–11. https://doi.org/10.1155/2017/6152651 ( reposiTUm)

Miskovic, G., Aleksic, O. S., Nikolic, M. V., Nicolics, J., Radosavljevic, G., Vasiljevic, Z. Z., Lukovic, M. D., & Smetana, W. (2016). Nanostructured SnO2 thick films for gas sensor application: analysis of structural and electronic properties. IOP Conference Series: Materials Science and Engineering, 108, 012003. https://doi.org/10.1088/1757-899x/108/1/012003 ( reposiTUm)

Suhir, E., Yi, S., Nicolics, J., Khatibi, G., & Lederer, M. (2016). Semiconductor film grown on a circular substrate: predictive modeling of lattice-misfit stresses. Journal of Materials Science: Materials in Electronics, 27(9), 9356–9362. https://doi.org/10.1007/s10854-016-4976-5 ( reposiTUm)

Suhir, E., Ghaffarian, R., & Nicolics, J. (2016). Could thermal stresses in a BGA/CGA-system be evaluated from a model intended for a homogeneously bonded assembly? Journal of Materials Science: Materials in Electronics, 27(1), 570–579. https://doi.org/10.1007/s10854-015-3790-9 ( reposiTUm)

Suhir, E., Ghaffarian, R., & Nicolics, J. (2016). Predicted stresses in ball-grid-array (BGA) and column-grid-array (CGA) interconnections in a mirror-like package design. Journal of Materials Science: Materials in Electronics, 27(3), 2430–2441. https://doi.org/10.1007/s10854-015-4042-8 ( reposiTUm)

Suhir, E., & Nicolics, J. (2016). Power Core (PC) Embedding a Plurality of IC Devices and Sandwiched Between Two Dissimilar Insulated Metal Substrates (IMS’): Predicted Thermal Stresses. Journal of Materials Science: Materials in Electronics, 27(7), 7646–7656. https://doi.org/10.1007/s10854-016-4749-1 ( reposiTUm)

Suhir, E., Ghaffarian, R., & Nicolics, J. (2016). Expected stress relief in a bi-material inhomogeneously bonded assembly with a low-modulus-and/or-low-fabrication-temperature bonding material at the ends. Journal of Materials Science: Materials in Electronics, 27(6), 5563–5574. http://hdl.handle.net/20.500.12708/149967 ( reposiTUm)

Fulmek, P. L., Nicolics, J., Nemitz, W., Schweitzer, S., Sommer, C., Hartmann, P., Schrank, F., & Wenzl, F.-P. (2016). The impact of the thermal conductivities of the color conversion elements of phosphor converted LEDs under different current driving schemes. Journal of Luminescence, 169, 559–568. https://doi.org/10.1016/j.jlumin.2015.04.003 ( reposiTUm)

Nemitz, W., Wenzl, F.-P., Schweitzer, S., Sommer, C., Hartmann, P., Fulmek, P. L., & Nicolics, J. (2015). Iterative Optical and Thermal Simulation Method for Proper Simulation of PC LEDs. LED Professional Review, 52, 48–53. http://hdl.handle.net/20.500.12708/151474 ( reposiTUm)

Suhir, E., Bensoussan, A., & Nicolics, J. (2015). Predicted Device-Degradation Failure-Rate. SAE Technical Paper Series, 1, 10. http://hdl.handle.net/20.500.12708/151821 ( reposiTUm)

Suhir, E., Ghaffarian, R., & Nicolics, J. (2015). Could application of column-grid-array (CGA) technology result in inelastic-strain-free state-of-stress in solder material? Journal of Materials Science: Materials in Electronics, 26(12), 10062–10067. https://doi.org/10.1007/s10854-015-3688-6 ( reposiTUm)

Suhir, E., Bensoussan, A., & Nicolics, J. (2014). Predicted elastic stability of a dual-coated fiber-optic connector. Microelectronics Reliability, 1, 13. http://hdl.handle.net/20.500.12708/156034 ( reposiTUm)

Suhir, E., & Nicolics, J. (2014). Analysis of a Bow-Free Prestressed Test Specimen. Journal of Biomechanical Engineering, 81(11), 1145021–1145024. http://hdl.handle.net/20.500.12708/156035 ( reposiTUm)

Wenzl, F.-P., Fulmek, P. L., Sommer, C., Schweitzer, S., Nemitz, W., Hartmann, P., Pachler, P., Hoschopf, H., Schrank, F., Langer, G., & Nicolics, J. (2014). Impact of extinction coefficient of phosphor on thermal load of color conversion elements of phosphor converted LEDs. Journal of Rare Earths, 32(3), 201–206. http://hdl.handle.net/20.500.12708/157577 ( reposiTUm)

Schweitzer, S., Sommer, C., Hartmann, P., Fulmek, P., Nicolics, J., Pachler, P., Hoschopf, H., Schrank, F., Langer, G., & Wenzl, F. P. (2014). A comprehensive discussion on colour conversion element design of phosphor converted LEDs. Journal of Solid State Lighting, 1(18). https://doi.org/10.1186/s40539-014-0018-1 ( reposiTUm)

Nemitz, W., Wenzl, F.-P., Schweitzer, S., Sommer, C., Hartmann, P., Fulmek, P. L., & Nicolics, J. (2014). Self-Compensation Approach for Maintaining the Chromaticity Coordinates of Phosphor Converted LEDs Upon Temperature Variations. LED Professional Review, 1, 54–60. http://hdl.handle.net/20.500.12708/158021 ( reposiTUm)

Langer, G., Leitgeb, M., Nicolics, J., Unger, M., Hoschopf, H., & Wenzl, F. P. (2014). Advanced Thermal Management Solutions on PCBs for High-Power Applications. Journal of Microelectronics and Electronic Packaging, 11(3), 104–114. https://doi.org/10.4071/imaps.422 ( reposiTUm)

Suhir, E., Kang, S., Nicolics, J., Gu, C., Bensoussan, A., & Bechou, L. (2013). Predicted thermal stresses in a cylindrical tri-material body, with application to optical fibers embedded into silicon. Journal of Electrical and Control Engineering (JECE), 3(6), 9–14. http://hdl.handle.net/20.500.12708/155974 ( reposiTUm)

Wenzl, F. P., Sommer, C., Hartmann, P., Pachler, P., Hoschopf, H., Langer, G., Fulmek, P., & Nicolics, J. (2013). The impact of the non-linearity of the radiant flux on the thermal load of the color conversion elements in phosphor converted LEDs under different current driving schemes. Optics Express, 21(S3), A439. https://doi.org/10.1364/oe.21.00a439 ( reposiTUm)

Fulmek, P. L., Sommer, C., Hartmann, P., Pachler, P., Hoschopf, H., Langer, G., Nicolics, J., & Wenzl, F.-P. (2013). On the Thermal Load of the Color-Conversion Elements in Phosphor-Based White Light-Emitting Diodes. Advanced Optical Materials, 1(10), 753–762. http://hdl.handle.net/20.500.12708/155972 ( reposiTUm)

Cerimovic, S., Talic, A., Beigelbeck, R., Antlinger, H., Sauter, T., Nicolics, J., Jakoby, B., & Keplinger, F. (2013). Bidirectional micromachined flow sensor featuring a hot film made of amorphous germanium. Measurement Science and Technology, 24(8), 084002. https://doi.org/10.1088/0957-0233/24/8/084002 ( reposiTUm)

Suhir, E., & Nicolics, J. (2012). Bending of a bi-material cantilever beam, with consideration of the role of the interfacial shearing stress. Zeitschrift Für Angewandte Mathematik Und Mechanik, 92(7), 573–582. http://hdl.handle.net/20.500.12708/164434 ( reposiTUm)

Suhir, E., Gschohsmann, W., & Nicolics, J. (2012). Analysis of a bi-material strip. Zeitschrift Für Angewandte Mathematik Und Mechanik, 92(4), 320–328. http://hdl.handle.net/20.500.12708/164435 ( reposiTUm)

Fulmek, P., Sommer, C., Hartmann, P., Wenzl, F. P., Pachler, P., Hoschopf, H., Langer, G., & Nicolics, J. (2012). Color temperature constancy of phosphor converted LED modules: a combined thermal and optical simulation study on the materials requirements. Elektrotechnik Und Informationstechnik. https://doi.org/10.1007/s00502-012-0107-z ( reposiTUm)

Gschohsmann, W., Nicolics, J., & Suhir, E. (2011). Deformations in stretched surface mounted ceramic strips for sensor applications. Microelectronics International, 28(3), 19–23. https://doi.org/10.1108/13565361111162585 ( reposiTUm)

Suhir, E., Gschohsmann, W., & Nicolics, J. (2011). Analysis of an elongated stretched strip, with application to a strain-gage electrical sensor design. Zeitschrift Für Angewandte Mathematik Und Mechanik, 91(4), 330–338. http://hdl.handle.net/20.500.12708/162508 ( reposiTUm)

Unger, M., Smetana, W., & Nicolics, J. (2011). Analyses of Fluid Temperature Profile in a Continuous-Flow Heater for Lab-In-Module Application. Berichte Aus Der Elektrotechnik: Proceedings E!4570 IPCTECH. New Generation of 3-D Integrated Passive Components & Microsystems in LTCC-Technology, 1, 92–107. http://hdl.handle.net/20.500.12708/161762 ( reposiTUm)

Fulmek, P. L., Atassi, I., Radosavljevic, G., Maric, A., Nicolics, J., & Smetana, W. (2011). Temperature Dependence of the Quasi-Static Properties of LTCC-Ferrites - First Results. Berichte Aus Der Elektrotechnik: Proceedings E!4570 IPCTECH. New Generation of 3-D Integrated Passive Components & Microsystems in LTCC-Technology, 1, 65–71. http://hdl.handle.net/20.500.12708/161759 ( reposiTUm)

Weilguni, M., Smetana, W., Nicolics, J., Kausel, W., & Goebl, W. (2011). Influence of lamination parameters on mechanical properties of low temperature co-fired ceramic tapes. Microelectronics Reliability, 51(7), 1253–1256. https://doi.org/10.1016/j.microrel.2011.03.002 ( reposiTUm)

Gschohsmann, W., Nicolics, J., & Suhir, E. (2010). Elastizitätsmodell eines keramischen Sensorstreifens bei longitudinaler Verformung. Elektrotechnik Und Informationstechnik, 127(10), 279–284. http://hdl.handle.net/20.500.12708/168059 ( reposiTUm)

Suhir, E., Gschohsmann, W., & Nicolics, J. (2010). Analysis of an elongated stretched strip, with application to a strain-gage electrical sensor design. Zeitschrift Für Angewandte Mathematik Und Mechanik, 91(4), 330–338. https://doi.org/10.1002/zamm.201000100 ( reposiTUm)

Weichslberger, G., & Nicolics, J. (2009). Entwärmung durch innovative Leiterplattentechnologie am Beispiel eines Operationsscheinwerfers auf LED-Basis. Plus, 11(1), 155–166. http://hdl.handle.net/20.500.12708/166420 ( reposiTUm)

Nicolics, J. (2009). Thermal Management. Plus, 11(1), 1. http://hdl.handle.net/20.500.12708/166418 ( reposiTUm)

Fasching, M., & Nicolics, J. (2009). Thermische Analyse des Pulslastverhaltens von Drahtwiderständen. Plus, 11(1), 179–184. http://hdl.handle.net/20.500.12708/166419 ( reposiTUm)

Atassi, I., Atzlesberger, C., Fulmek, P. L., Nicolics, J., & Smetana, W. (2009). Ferrofluid-Piston Based Micropump and Electromagnetic Actuation in LTCC Technology. Journal of Microelectronics and Electronic Packaging, 6(4), 228–239. http://hdl.handle.net/20.500.12708/168108 ( reposiTUm)

Brandl, M., Grabner, J., Kellner, K.-H., Seifert, F., Nicolics, J., Grabner, S., & Grabner, G. (2009). A Low-Cost Wireless Sensor System and its Application in Dental Retainers. IEEE Sensors Journal, 9(3), 255–262. http://hdl.handle.net/20.500.12708/165513 ( reposiTUm)

Mündlein, M., Valentin, B., Chabicovsky, R., Nicolics, J., Weremczuk, J., Tarapata, G., & Jachowicz, R. (2008). Comparison of transepidermal water loss (TEWL) measurements with two novel sensors based on different sensing principles. Sensors and Actuators A: Physical, 142, 67–72. http://hdl.handle.net/20.500.12708/168629 ( reposiTUm)

Nicolics, J. (2007). Multifunktionale Leiterplatte. Produktion von Leiterplatten Und Systemen, 9(11), 2049. http://hdl.handle.net/20.500.12708/168600 ( reposiTUm)

Hauser, H., Giouroudi, I., Steurer, J., Musiejovsky, L., & Nicolics, J. (2007). Magnetic Hysteresis Modeling of Thin Film Giant Magnetoimpedance Sensors. Sensor Letters, 5(1), 133–137. http://hdl.handle.net/20.500.12708/168599 ( reposiTUm)

Langer, G., & Nicolics, J. (2007). Thermische Analysen von Multilayer-Leiterplatten mit integrierten optischen Verbindungen. Produktion von Leiterplatten Und Systemen, 9(11), 2243–2250. http://hdl.handle.net/20.500.12708/168598 ( reposiTUm)

Nicolics, J., Musiejovsky, L., Steurer, J., Giouroudi, I., Hauser, H., Mündlein, M., Zoppel, S., & Zehetner, J. (2007). Laser Welding Process Optimization for the Production of Giant Magnetoimpedance Magnetic Field Sensors. Sensor Letters, 5(1), 204–207. http://hdl.handle.net/20.500.12708/168630 ( reposiTUm)

Hauser, H., Steurer, J., Nicolics, J., & Giouroudi, I. (2006). Wireless Magnetic Field Sensor. Journal of Electrical Engineering, 57(12), 9–14. http://hdl.handle.net/20.500.12708/171826 ( reposiTUm)

Valentin, B., Mündlein, M., Chabicovsky, R., & Nicolics, J. (2006). A Novel Transepidermal Water Loss Sensor. IEEE Sensors Journal, 6(4), 1022–1026. http://hdl.handle.net/20.500.12708/171818 ( reposiTUm)

Mündlein, M., & Nicolics, J. (2005). Modeling of Particle Arrangement in an Isotropically Conductive Adhesive Joint. IEEE Transactions on Components and Packaging Technologies, 28(4), 765–770. http://hdl.handle.net/20.500.12708/171827 ( reposiTUm)

Hanreich, G., Mayer, M., Mündlein, M., & Nicolics, J. (2004). Thermal investigation of GaAs microwave power transistors. Journal of Microelectronics and Electronic Packaging, VOL. 1, 1–8. http://hdl.handle.net/20.500.12708/174454 ( reposiTUm)

Lederer, M., Gökdeniz, Z. G., Khatibi Damavandi, G., & Nicolics, J. (2022). Temperaturabhängigkeit mechanischer Eigenschaften von Niedertemperatur-Silber-Sinterschichten und deren Modellierung für die Nutzung in FiniteElemente-Simulationen. In EBL DVS Berichtband 375 (pp. 244–251). ( reposiTUm)

Goekdeniz, Z., Lederer, M., Khatibi, G., & Nicolics, J. (2021). Temperature Dependent Relaxation Behavior of Pressureless and Pressure Assisted Sintered Silver. In 2021 44th International Spring Seminar on Electronics Technology (ISSE). ieee, Austria. IEEE Conference Publications. https://doi.org/10.1109/isse51996.2021.9467547 ( reposiTUm)

Goekdeniz, Z., Lederer, M., Khatibi, G., & Nicolics, J. (2021). Temperature Dependent Relaxation Behavior of Ag-Sintered Copper Joints. In 2021 23rd European Microelectronics and Packaging Conference & Exhibition (EMPC). 2021 23rd European Microelectronics and Packaging Conference & Exhibition (EMPC), Gothenburg, Sweden, Sweden. https://doi.org/10.23919/empc53418.2021.9585013 ( reposiTUm)

Gökdeniz, Z. G., Mündlein, M., Khatibi, G., Steiger-Thirsfeld, A., & Nicolics, J. (2020). Ermüdungsverhalten hoch-belasteter Ag-Sinterverbindungen. In EBL 2020 - Elektronische Baugruppen und Leiterplatten (pp. 204–209). VDE. http://hdl.handle.net/20.500.12708/77305 ( reposiTUm)

Franz, M., Kupka, T., Schmid, G., & Nicolics, J. (2019). Greenhouse Gas Emissions of Printed Circuit Board Manufacturing of Different Technologies. In 42nd International Spring Seminar on Electronics Technology (pp. 151–152). http://hdl.handle.net/20.500.12708/77036 ( reposiTUm)

Geokdeniz, Z., Khatibi, G., Nicolics, J., & Steiger-Thirsfeld, A. (2019). Behaviour of Silver-Sintered Joints by Cyclic Mechanical Loading and Influence of Temperature. In 2019 22nd European Microelectronics and Packaging Conference & Exhibition (EMPC). EMPC, 22nd Microelectronics an Packaging Conference (EMPC) & Exhibition, Pisa, Italy. IEEE. https://doi.org/10.23919/empc44848.2019.8951762 ( reposiTUm)

Mazloum-Nejadari, A., Lederer, M., Khatibi, G., Czerny, B., Weiss, L., & Nicolics, J. (2018). Investigation on the Lifetime of Copper Wire Bonds in Electronic Packages under Thermal and Mechanical Cyclic Loading. In Proceedings ESTC 2018 (p. 7). http://hdl.handle.net/20.500.12708/76561 ( reposiTUm)

Franz, M., Unger, M., Schmid, G., & Nicolics, J. (2018). Environmental Assessment of a New Developed Camera System for Automotive Application. In 2018 41st International Spring Seminar on Electronics Technology (ISSE). IEEE Xplore. https://doi.org/10.1109/isse.2018.8443694 ( reposiTUm)

Unger, M., & Nicolics, J. (2018). Discretisation and Data Reduction Algorithm for FE Modelling of Complex Multilayer PCBs with Embedded Components. In Book of Abstracts (pp. 122–123). http://hdl.handle.net/20.500.12708/76378 ( reposiTUm)

Liedtke, M., Khatibi, G., Czerny, B., & Nicolics, J. (2018). Thermomechanical Reliability Investigation of Insulated Gate Bipolar Transistor Module. In 2018 41st International Spring Seminar on Electronics Technology (ISSE). 41st International Spring Seminar on Electronics Technology (ISSE), Zlatibor, EU. IEEE. https://doi.org/10.1109/isse.2018.8443619 ( reposiTUm)

Gökdeniz, Z. G., Khatibi, G., Walter, T., & Nicolics, J. (2018). Temperature Dependent Mechanical Properties of Sintered Silver-Copper Joints. In 2018 41st International Spring Seminar on Electronics Technology (ISSE). 41st International Spring Seminar on Electronics Technology (ISSE), Zlatibor, EU. IEEE. https://doi.org/10.1109/isse.2018.8443659 ( reposiTUm)

Silvano de Sousa, J., Liebfahrt, S., Reitmaier, B., Prutti, M., Schuscha, B., Qi, T., Nicolics, J., Unger, M., & Fulmek, P. L. (2018). Heat Capacitive PCB. In Proceedings ESTC 2018 (p. 6). http://hdl.handle.net/20.500.12708/76056 ( reposiTUm)

Silvano de Sousa, J., Fulmek, P. L., Unger, M., Haumer, P., & Nicolics, J. (2017). Embedded Heat Pipes as Thermal Solution for PCBs. In Proceedings ICEP 2017 (pp. 394–398). http://hdl.handle.net/20.500.12708/75985 ( reposiTUm)

Silvano de Sousa, J., Fulmek, P. L., Unger, M., Haumer, P., Nicolics, J., Abo Ras, M., & May, D. (2017). Enhanced In-Plane Heat Transport in Embedded Mini Heat Pipes PCB. In Proceedings IMAPS 2017 (p. 5). http://hdl.handle.net/20.500.12708/75989 ( reposiTUm)

Groß, S., Grübl, W., Schuch, B., Stahr, H., Morianz, M., Böttcher, L., Manessis, D., Nicolics, J., & Unger, M. (2017). EmPower - Embedded power components for electric vehicle applications. In Proceedings APE 2017 (p. 7). http://hdl.handle.net/20.500.12708/75990 ( reposiTUm)

Miskovic, G., Nikolic, M. V., Lukovic, M. D., Vasiljevic, Z. Z., Nicolics, J., & Aleksic, O. S. (2017). Pseudobrookite thick films for potential application as low-temperature sensitive material in NO gas sensors. In IEEE Proc. of ISSE 2017 (p. 6). http://hdl.handle.net/20.500.12708/75982 ( reposiTUm)

Silvano de Sousa, J., Unger, M., Fulmek, P. L., Haumer, P., & Nicolics, J. (2017). Embedded Mini Heat Pipes asThermal Solution for PCBs. In Proceedings of the European Microelectronics and Packaging Conference EMPC (p. 2). http://hdl.handle.net/20.500.12708/75983 ( reposiTUm)

Mazloum Nejadari, A., Lederer, M., Khatibi, G., & Nicolics, J. (2017). Crystal plasticity modeling of the heat affected zone of copper micro-wires. In Proceedings of the European Microelectronics and Packaging Conference EMPC (p. 6). http://hdl.handle.net/20.500.12708/75984 ( reposiTUm)

Nicolics, J., Unger, M., Morianz, M., Stahr, H., & Groß, S. (2017). Thermal Characterization of a Pedelec 500W Motor Driver Module with Embedded Power Devices. In IEEE Proc. of ISSE 2017 (p. 6). http://hdl.handle.net/20.500.12708/75980 ( reposiTUm)

Miskovic, G., Lukovic, M. D., Nikolic, M. V., Vasiljevic, Z. Z., Nicolics, J., & Aleksic, O. S. (2017). Possible Nitrogen Oxide and Carbon Monoxide Gas Sensing Using Pseudobrookite Thick Films. In IEEE Proc. of ISSE 2017 (p. 2). http://hdl.handle.net/20.500.12708/75981 ( reposiTUm)

Franz, M., Unger, M., Stahr, H., Morianz, M., Kollmann, R., & Nicolics, J. (2017). Environmental aspects of new embedded power modules with 500 W and 50 kW. In IEEE 2017 40th International Spring Seminar on Electronics Technology (ISSE) (pp. 1–6). IEEE Xplore. http://hdl.handle.net/20.500.12708/76098 ( reposiTUm)

Fulmek, P. L., Haumer, P., Wenzl, F.-P., Nemitz, W., Beigelbeck, R., & Nicolics, J. (2017). D5.3 - An Advanced Parametric Thermal Model for High Power LED Modules. In Proceedings Sensor 2017. AMA Conferences 2017 - SENSOR 2017 and IRS² 201, Nürnberg, D, EU. https://doi.org/10.5162/sensor2017/d5.3 ( reposiTUm)

Silvano de Sousa, J., Fulmek, P. L., Unger, M., Haumer, P., & Nicolics, J. (2017). Enhanced Heat Transport in Printed Circuit Boards via Passive Components Embedding. In Conference Proceedings (p. 6). http://hdl.handle.net/20.500.12708/75988 ( reposiTUm)

Nemitz, W., Fulmek, P. L., Nicolics, J., & Wenzl, F.-P. (2016). Determining the thermal load of phosphor converted LEDs by an iterative optical and thermal simulation procedure. In Proceedings (pp. 99530C – 1). http://hdl.handle.net/20.500.12708/74918 ( reposiTUm)

Groß, S., Beart, K., Schmidt, T., Schuch, B., Stahr, H., Morianz, M., Nicolics, J., & Unger, M. (2016). EmPower - Integrierte Leistungskomponenten für Elektrofahrzeuge. In Tagungsband EBL 2016 (p. 6). http://hdl.handle.net/20.500.12708/75363 ( reposiTUm)

Stahr, H., Unger, M., Nicolics, J., Morianz, M., Gross, S., & Böttcher, L. (2016). Thermal benchmark of a classic and novel embedded high-power 3-phase Inverter bridge. In Proceedings ESTC 2016 (p. 6). http://hdl.handle.net/20.500.12708/75594 ( reposiTUm)

Miskovic, G., Lukovic, M. D., Nikolic, M. V., Vasiljevic, Z. Z., Nicolics, J., & Aleksic, O. S. (2016). Analysis of electronic properties of pseudobrookite thick films with possible application for gas sensors. In Proceedings ISSE 2016 (pp. 386–391). http://hdl.handle.net/20.500.12708/75585 ( reposiTUm)

Unger, M., Nicolics, J., Stahr, H., Morianz, M., & Dosseul, F. (2016). Thermal Performance of Novel Diode Packages. In Extended Abstracts ISSE 2016 (pp. 65–66). http://hdl.handle.net/20.500.12708/75586 ( reposiTUm)

Suhir, E., Nicolics, J., & Bechou, L. (2016). Predicted Thermal Stresses in a Bow-Free Electronic Assembly for Automotive and Potential Aerospace Applications. In Conference Proceedings (p. 10). http://hdl.handle.net/20.500.12708/75582 ( reposiTUm)

Suhir, E., Ghaffarian, R., Bechou, L., & Nicolics, J. (2016). Column-Grid-Array (CGA) Technology Could Lead to a Highly Reliable Package Design. In Conference Proceedings (p. 8). http://hdl.handle.net/20.500.12708/75583 ( reposiTUm)

Unger, M., Stahr, H., Morianz, M., Nicolics, J., & Dosseul, F. (2016). Miniaturized Power-Diode Package with Superior Thermal Performance using Embedding Technology. In Proceedings ISSE 2016 (pp. 97–105). http://hdl.handle.net/20.500.12708/75584 ( reposiTUm)

Suhir, E., & Nicolics, J. (2016). Power Core (PC) Embedding a Plurality of IC Devices and Sandwiched Between Two Dissimilar Insulated Metal Substrates (IMS’): Predicted Thermal Stresses. In Proceedings EuroSimE 2016 (p. 9). http://hdl.handle.net/20.500.12708/75588 ( reposiTUm)

Suhir, E., & Nicolics, J. (2016). Aerospace electronics-and-photonics (AEP) reliability has to be quantified to be assured. In Proceedings AIAA ScieTech 2016 (pp. 167901–167927). http://hdl.handle.net/20.500.12708/75587 ( reposiTUm)

Stahr, H., Morianz, M., Gross, S., Unger, M., Nicolics, J., & Böttcher, L. (2016). Investigation of a power module with double sided cooling using a new concept for chip embedding. In Proceedings of CIPS 2016 (p. 10). VDE Verlag GmbH Berlin. http://hdl.handle.net/20.500.12708/75581 ( reposiTUm)

Khatibi, G., Czerny, B., Lassnig, A., Lederer, M., Magnien, J., Nicolics, J., & Suhir, E. (2016). A novel approach for evaluation of material interfaces in electronics. In 2016 IEEE Aerospace Conference. 2016 IEEE Aerospace Conference, USA, Non-EU. IEEE. https://doi.org/10.1109/aero.2016.7500758 ( reposiTUm)

Mazloum Nejadari, A., Khatibi, G., Lederer, M., Czerny, B., Nicolics, J., & Weiss, L. (2016). Reliability analysis of Cu wire bonds in microelectronic packages. In 2016 17th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE). 17th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems, EuroSimE 2016, Deutschland, EU. IEEE. https://doi.org/10.1109/eurosime.2016.7463363 ( reposiTUm)

Suhir, E., Nicolics, J., Khatibi, G., & Lederer, M. (2016). Semiconductor Film Grown on a Circular Substrate: Predictive Modeling of Lattice-Misfit Stresses. In IOP Conference Series: Materials Science and Engineering (p. 012029). IOP Conf. Series: Materials Science and Engineering. https://doi.org/10.1088/1757-899x/119/1/012029 ( reposiTUm)

Nemitz, W., Wenzl, F.-P., Schweitzer, S., Sommer, C., Hartmann, P., Fulmek, P. L., & Nicolics, J. (2015). A self-compensation approach for chromaticity coordinate maintenance of phosphor converted LEDs upon temperature variations. In Book of Abstracts (pp. 98–99). Budapest University of Technology and Economics. http://hdl.handle.net/20.500.12708/74937 ( reposiTUm)

Fulmek, P. L., Nicolics, J., Wenzl, F.-P., Nemitz, W., Schweitzer, S., & Schweitzer, P. (2015). Influence of Electrode Structure on Thermal Performance of High Power LED. In Book of Abstracts (pp. 96–97). Budapest University of Technology and Economics. http://hdl.handle.net/20.500.12708/74938 ( reposiTUm)

Nemitz, W., Sommer, C., Schweitzer, S., Hartmann, P., Fulmek, P. L., Nicolics, J., & Wenzl, F.-P. (2015). Chromaticity coordinate maintenance of phosphor converted LEDs by a self-compensation approach. In Proceedings (pp. 183–187). Budapest University of Technology and Economics. http://hdl.handle.net/20.500.12708/74935 ( reposiTUm)

Fulmek, P. L., Nemitz, W., Wenzl, F.-P., Schweitzer, S., Hartmann, P., & Nicolics, J. (2015). Simulation Based Experimental Study of the Temperature and Power Density Distribution in a High-Power LED. In Proceedings (pp. 179–182). Budapest University of Technology and Economics. http://hdl.handle.net/20.500.12708/74936 ( reposiTUm)

Suhir, E., Bensoussan, A., & Nicolics, J. (2015). Bow-Free Tri-Component Mechanically Pre-Stressed Failure-Oriented-Accelerated-Test (FOAT) Specimen. In Proceedings (p. 9). http://hdl.handle.net/20.500.12708/74934 ( reposiTUm)

Unger, M., Nicolics, J., Morianz, M., Stahr, H., Dosseul, F., & Manessis, D. (2015). Thermomechanical comparison of novel embedded high-power packages using FEM-simulations. In Proceedings of IMAPS Nordic Conference 2015 (pp. 126–133). http://hdl.handle.net/20.500.12708/74945 ( reposiTUm)

Suhir, E., Bechou, L., & Nicolics, J. (2015). Bow-free tri-component assembly for aerospace optoelectronics applications: Predicted thermal stresses. In 2015 IEEE Aerospace Conference. IEEE Aerospace Conference 2015, Big Sky, Montana, USA, Non-EU. https://doi.org/10.1109/aero.2015.7119192 ( reposiTUm)

Franz, M., & Nicolics, J. (2015). Environmental aspects of white LED lighting systems: Energy statistics, study parameters, rare earths. In 2015 38th International Spring Seminar on Electronics Technology (ISSE). IEEE Xplore. https://doi.org/10.1109/isse.2015.7248029 ( reposiTUm)

Suhir, E., Bensoussan, A., Khatibi, G., & Nicolics, J. (2015). Probabilistic design for reliability in electronics and photonics: Role, significance, attributes, challenges. In 2015 IEEE International Reliability Physics Symposium. Reliability Physics Symposium (IRPS), 2015 IEEE International, Ca, USA, Non-EU. IEEE. https://doi.org/10.1109/irps.2015.7112749 ( reposiTUm)

Artner, G., Gentner, P. K., Nicolics, J., & Mecklenbräuker, C. (2015). Material Characterisation of Carbon-Fiber Compounds with the NRW Method. In Cost IC1004: 12th MC & Scientific Meeting (pp. 1–6). http://hdl.handle.net/20.500.12708/74785 ( reposiTUm)

Schweitzer, S., Nemitz, W., Sommer, C., Hartmann, P., Fulmek, P. L., Nicolics, J., Pachler, P., Hoschopf, H., Schrank, F., Langer, G., & Wenzl, F.-P. (2014). The impact of individual materials parameters on color temperature reproducibility among phosphor converted LED sources. In Proceedings of SPIE 2014 (p. 1). http://hdl.handle.net/20.500.12708/74949 ( reposiTUm)

Wenzl, F.-P., Nemitz, W., Kuna, L., Sommer, C., Fulmek, P. L., Nicolics, J., Pachler, P., Hoschopf, H., Schrank, F., Langer, G., & Hartmann, P. (2014). Foil based optical elements for beam shaping and color homogenization of phosphor converted white LED sources. In Proceedings of SPIE 2014 (p. 1). http://hdl.handle.net/20.500.12708/74950 ( reposiTUm)

Suhir, E., Bensoussan, A., Khatibi, G., & Nicolics, J. (2014). Probabilistic Design for Reliability in Electronics and Photonics: Role, Significance, Attributes, Challenges. In Proceedings of IRPS 2014 (p. 13). http://hdl.handle.net/20.500.12708/74946 ( reposiTUm)

Nemitz, W., Wenzl, F.-P., Schweitzer, S., Sommer, C., Hartmann, P., Fulmek, P. L., & Nicolics, J. (2014). A self-compensation approach for maintaining the chromaticity coordinates of phosphor converted LEDs upon temperature variations. In Proceedings of LED professional Symposium +Expo (pp. 66–73). http://hdl.handle.net/20.500.12708/74947 ( reposiTUm)

Fulmek, P. L., Wenzl, F.-P., Nemitz, W., Schweitzer, S., Hoschopf, H., Langer, G., & Nicolics, J. (2014). Innovative Junction Temperature Measurement Method Applied on High-Power LED Arrays. In Proceedings of the 37th ISSE (pp. 36–37). http://hdl.handle.net/20.500.12708/74401 ( reposiTUm)

Fulmek, P. L., Langer, G., Wenzl, F.-P., Nemitz, W., Schweitzer, S., Hoschopf, H., & Nicolics, J. (2014). Direct Junction Temperature Measurement in High-Power LEDs. In Proceedings 37th Int. Spring Seminar on Electronics Technology (p. 6). IEEE Computer Society. http://hdl.handle.net/20.500.12708/74332 ( reposiTUm)

Suhir, E., Nicolics, J., & Bechou, L. (2014). Aerospace Electronic and Photonic Packaging: Predicted Thermal Stresses in Bi- and Tri-Material Assemblies. In IEEE Proceedings (p. 12). http://hdl.handle.net/20.500.12708/74337 ( reposiTUm)

Unger, M., Nicolics, J., Langer, G., Wenzl, F.-P., Nemitz, W., Fulmek, P. L., & Schweitzer, S. (2014). Thermal Performance Study of Direct Attached High-Power LEDs using an Innovative Submount Technique. In Proceedings of the 37th ISSE (p. 6). http://hdl.handle.net/20.500.12708/74378 ( reposiTUm)

Unger, M., Nicolics, J., Langer, G., Wenzl, F.-P., Nemitz, W., Fulmek, P. L., & Schweitzer, S. (2014). Thermal Performance Study of Direct Attached High-Power LEDs using an Innovative Submount Technique. In Proceedings ESTC 2014 (pp. 171–176). http://hdl.handle.net/20.500.12708/74338 ( reposiTUm)

Khatibi, G., Czerny, B., Magnien, J., Lederer, M., Suhir, E., & Nicolics, J. (2014). Towards Adequate Qualification Testing of Electronic Products: Review and Extension. In 2014 IEEE 16th Electronics Packaging Technology Conference (EPTC 2014) (pp. 1–6). IEEE. http://hdl.handle.net/20.500.12708/48699 ( reposiTUm)

Langer, G., Leitgeb, M., Nicolics, J., Unger, M., Hoschopf, H., & Wenzl, F.-P. (2014). Advanced Thermal Management Solutions on PCBs for High Power Applications - Best Paper Award. In Proceedings (p. 15). http://hdl.handle.net/20.500.12708/74336 ( reposiTUm)

Wenzl, F.-P., Fulmek, P. L., Sommer, C., Hartmann, P., Pachler, P., Hoschopf, H., Schrank, F., Langer, G., & Nicolics, J. (2013). The impact of the color conversion element configuration on its thermal response in phosphor converted LEDs. In Proc. of SPIE Vol. 8835 (pp. 1–8). http://hdl.handle.net/20.500.12708/73862 ( reposiTUm)

Sommer, C., Fulmek, P. L., Nicolics, J., Schweitzer, S., Nemitz, W., Pachler, P., Hoschopf, H., Schrank, F., Langer, G., & Wenzl, F.-P. (2013). Thermal and Optical Aspects of Glob-Top Design for Phosphor Converted White LED Light Sources. In Proc. of SPIE Vol. 8835 (pp. 1–8). http://hdl.handle.net/20.500.12708/73863 ( reposiTUm)

Suhir, E., Bechoub, L., Bensoussan, A., & Nicolics, J. (2013). Photovoltaic Reliability Engineering: Qualification Testing and Probabilistic-Design-for-Reliability Concept. In Proc. SPIE 8825 (pp. 1–14). http://hdl.handle.net/20.500.12708/73864 ( reposiTUm)

Mashkov, P., Gyoch, B., Penchev, S., Beloev, H., & Nicolics, J. (2013). Method for In-Situ Thermal Load Testing of High-Brightness LED Arrays. In Proceedings of the 2013 36th International Spring Seminar on Electronics Technology (pp. 41–46). IEEE Xplore. http://hdl.handle.net/20.500.12708/73509 ( reposiTUm)

Nagl, B., Czerny, B., Lederer, M., Khatibi, G., Thoben, M., & Nicolics, J. (2013). Experimental investigation of transient electrical, thermal and mechanical behavior of IGBT inverter modules during operation. In 2013 25th International Symposium on Power Semiconductor Devices & IC’s (ISPSD). ISPSD 2013 - 25th International Symposium on Power Semiconductor Devices & ICs, Kanazawa, Japan, Non-EU. https://doi.org/10.1109/ispsd.2013.6694467 ( reposiTUm)

Wenzl, F.-P., Sommer, C., Hartmann, P., Pachler, P., Hoschopf, H., Langer, G., Fulmek, P. L., & Nicolics, J. (2012). White light quality of phosphor converted light‐emitting diodes from a materials perspective of view. In Conference Proceedings (p. 1). http://hdl.handle.net/20.500.12708/73233 ( reposiTUm)

Weilguni, M., Smetana, W., Radosavljevic, G., Nicolics, J., Goebl, W., & Hofmann, A. (2012). Low Temperature Co-fired Ceramics Processing Parameters Governing the Performance of Miniaturized Force Sensor. In Proc. of 8th Conf. and Exhibition on Ceramic Interconnect and Ceramic Microsystems Technology (CICMT) (pp. 411–416). http://hdl.handle.net/20.500.12708/73200 ( reposiTUm)

Atassi, I., Bauer, E., & Nicolics, J. (2012). Review of Current Thermoelectric Materials and an Evaluation of a Cascading Approach. In Book of Abstracts (pp. 34–35). http://hdl.handle.net/20.500.12708/73155 ( reposiTUm)

Wenzl, F.-P., Sommer, C., Hartmann, P., Pachler, P., Hoschopf, H., Langer, G., Fulmek, P. L., & Nicolics, J. (2012). White light quality of phosphor converted leds from a phosphor materials perspective of view: an Evaluation based on combined thermal and optical simulations. In Proceedings of SPIE 8484. Twelfth International Conference on Solid State Lighting and Fourth International Conference on White LEDs and Solid State Lighting, an Diego, California, USA, Non-EU. http://hdl.handle.net/20.500.12708/74380 ( reposiTUm)

Schweitzer, S., Sommer, C., Hartmann, P., Nemitz, W., Pachler, P., Hoschopf, H., Langer, G., Fulmek, P. L., Nicolics, J., & Wenzl, F.-P. (2012). The Impact Of The Silicone Encapsulation Layers On The White Light Quality Of Phosphor Converted Leds. In Proceedings of SPIE 8484 (p. 8). http://hdl.handle.net/20.500.12708/74381 ( reposiTUm)

Atassi, I., Bauer, E., Nicolics, J., Dangl, B., Spendlhofer, L., Knospe, D., & Faistauer, F. (2012). Current Thermoelectric Materials and an Evaluation of Thermoelectric Material Contacting Approaches. In Conference Proceedings of the 2012 35th International Spring Seminar on Electronics Technology (pp. 70–75). IEEE Xplore. http://hdl.handle.net/20.500.12708/73157 ( reposiTUm)

Krivic, P., Wenzl, F.-P., Sommer, C., Langer, G., Pachler, P., Hoschopf, H., Fulmek, P. L., & Nicolics, J. (2012). Investigation of Thermal Properties of Power LED Illumination Assemblies. In Conference Proceedings of the 2012 35th International Spring Seminar on Electronics Technology (pp. 76–83). IEEE Xplore. http://hdl.handle.net/20.500.12708/73159 ( reposiTUm)

Krivic, P., Wenzl, F.-P., & Nicolics, J. (2012). Investigation of Thermal Properties of Power LED Illumination Assemblies. In Book of Abstracts (pp. 36–37). http://hdl.handle.net/20.500.12708/73158 ( reposiTUm)

Glatz, R., Fulmek, P. L., Skerlan, S., Siegele, M., Radosavljevic, G., & Nicolics, J. (2012). Thermal Study of a ZrO2-Based Heater Element by Thermography at Different Spectral Sensitivities. In Book of Abstracts (pp. 46–47). http://hdl.handle.net/20.500.12708/73160 ( reposiTUm)

Glatz, R., Fulmek, P. L., Nicolics, J., Skerlan, S., Siegele, M., & Radosavljevic, G. (2012). Comparison of Two High-End Infrared Thermography Systems with Different Spectral Sensitivity for Thermal Investigations of Sensor Heater Elements. In Conference Proceedings of the 2012 35th International Spring Seminar on Electronics Technology (pp. 107–113). IEEE Xplore. http://hdl.handle.net/20.500.12708/73161 ( reposiTUm)

Weilguni, M., Smetana, W., Hofmann, A., Radosavljevic, G., Goebl, W., & Nicolics, J. (2012). A ring-shaped LTCC/HTCC sensor for detection of finger forces in clarinet playing. In Conference Proceedings (pp. 1116–1119). http://hdl.handle.net/20.500.12708/73183 ( reposiTUm)

Nicolics, J., Krivic, P., Fulmek, P. L., Wenzl, F.-P., Sommer, C., Hartmann, P., Pachler, P., Hoschopf, H., & Langer, G. (2012). Thermal Issues of Phosphor Converted LEDs. In LED Lighting Technologies, International Winning Approaches (pp. 22–27). http://hdl.handle.net/20.500.12708/73219 ( reposiTUm)

Fulmek, P. L., Nicolics, J., Glatz, R., Skerlan, S., & Siegele, M. (2012). Thermal Investigation of a Gas Sensor Heater Element using High-Resolution Thermography. In Conference Proceedings (pp. 366–372). http://hdl.handle.net/20.500.12708/73220 ( reposiTUm)

Nagl, B., Nicolics, J., Suhir, E., & Gschohsmann, W. (2012). Thermomechanical Consideration of Stress and Strain of a Thick-Wire Bond During Short-Circuit Load. In Book of Abstracts (pp. 116–117). http://hdl.handle.net/20.500.12708/73167 ( reposiTUm)

Nagl, B., Suhir, E., Gschohsmann, W., & Nicolics, J. (2012). Transient Thermomechanical Study of a Thick-Wire Bond With Particular Attention to the Interfacial Shearing Stress. In Conference Proceedings of the 2012 35th International Spring Seminar on Electronics Technology (pp. 339–344). IEEE Xplore. http://hdl.handle.net/20.500.12708/73168 ( reposiTUm)

Nagl, B., Czerny, B., Lederer, M., Khatibi, G., Thoben, M., & Nicolics, J. (2012). Electro-Thermal Analysis of In Situ Vibration Measurements on IGBT Modules under Operation Conditions. In Conference Proceedings (pp. 1–6). http://hdl.handle.net/20.500.12708/73232 ( reposiTUm)

Fulmek, P. L., Haumer, P., Weilguni, M., & Nicolics, J. (2011). High-Resolution Thermography for High-Power LED Quality Control. In Abstracts Proceedings (pp. 222–223). 34th International Spring Seminar on Electronics Technology. http://hdl.handle.net/20.500.12708/72423 ( reposiTUm)

Maric, A., Atassi, I., Blaz, N., Radosavljevic, G., Zivanov, L., Homolka, H., Smetana, W., & Nicolics, J. (2011). Influence of sintering temperature on complex permeability of ferritic LTCC in wide frequency range. In Proceedings of the 2011 34th International Spring Seminar on Electronics Technology (ISSE). ISSE 2011, Tatranska Lomnica, Slovakia, EU. IEEE Xplore. https://doi.org/10.1109/isse.2011.6053884 ( reposiTUm)

Maric, A., Atassi, I., Blaz, N. V., Radosavljevic, G., Zivanov, Lj., Homolka, H., Smetana, W., & Nicolics, J. (2011). Complex Permeability Variation of Ferritic LTCC in Dependence on Firing Temperature. In Abstracts Proceedings (pp. 204–205). 34th International Spring Seminar on Electronics Technology. http://hdl.handle.net/20.500.12708/72422 ( reposiTUm)

Recheis, M., Nicolics, J., Wegleiter, H., Schweighofer, B., & Fulmek, P. L. (2011). Inductive Displacement Measurement for a Basic Active Magnetic Bearing Test Rig. In Abstracts Proceedings (pp. 120–121). 34th International Spring Seminar on Electronics Technology. http://hdl.handle.net/20.500.12708/72431 ( reposiTUm)

Weilguni, M., Atassi, I., Gschohsmann, W., Smetana, W., Nicolics, J., & Goebl, W. (2011). An analytical model for a two-layer LTCC beam. In Proceedings of the 2011 34th International Spring Seminar on Electronics Technology (ISSE). ISSE 2011, Tatranska Lomnica, Slovakia, EU. IEEE Xplore. https://doi.org/10.1109/isse.2011.6053925 ( reposiTUm)

Recheis, M., Nicolics, J., Wegleiter, H., Schweighofer, B., & Fulmek, P. (2011). Evaluation of inductive displacement sensors for a basic active magnetic bearing test rig. In Proceedings of the 2011 34th International Spring Seminar on Electronics Technology (ISSE). ISSE 2011, Tatranska Lomnica, Slovakia, EU. IEEE Xplore. https://doi.org/10.1109/isse.2011.6053964 ( reposiTUm)

Weilguni, M., Gschohsmann, W., Smetana, W., Nicolics, J., & Goebl, W. (2011). An Analytical Model for a Multilayer Low Temperature Co-Fired Ceramics Laminate. In Abstracts Proceedings (pp. 194–195). 34th International Spring Seminar on Electronics Technology. http://hdl.handle.net/20.500.12708/72429 ( reposiTUm)

Gschohsmann, W., & Nicolics, J. (2010). A model to specify the deformations in ceramic sensor strips subjected to surface displacements in the contact area. In Proceedings of the 34th International Microelectronics and Packaging IMAPS-CPMT Poland Conference, Wroclaw; 22.09.2010 - 25.09.2010. Wroclaw University of Technology. http://hdl.handle.net/20.500.12708/71996 ( reposiTUm)

Nicolics, J., Langer, G., Lutschounig, F., Lang, K.-J., & Huber, R. (2010). Impact of Printed Circuit Board Technology on Thermal Performance of High-Power LED Assembly - Experimental Results. In Book of Abstracts. 3rd Electronics System Integration Technology Conference, ESTC 2010, Berlin, Berlin, EU. http://hdl.handle.net/20.500.12708/71997 ( reposiTUm)

Nicolics, J., Langer, G., Lutschounig, F., Lang, K.-J., & Huber, R. (2010). Impact of printed circuit board technology on thermal performance of high-power LED assembly - experimental results. In 3rd Electronics System Integration Technology Conference ESTC. 3rd Electronics System Integration Technology Conference, ESTC 2010, Berlin. https://doi.org/10.1109/estc.2010.5642914 ( reposiTUm)

Weilguni, M., Nicolics, J., Medek, R., Franz, M., Langer, G., & Lutschounig, F. (2010). Characterization of the thermal impedance of high–power LED assembly based on innovative printed circuit board technology. In 33rd International Spring Seminar on Electronics Technology, ISSE 2010. IEEE, Austria. IEEE Xplore. https://doi.org/10.1109/isse.2010.5547295 ( reposiTUm)

Nicolics, J., Weilguni, M., Medek, R., Langer, G., & Lutschounig, F. (2010). Thermal Impedance Study of High-Power LED Flashlight Assembly. In Book of Abstracts (pp. 49–50). http://hdl.handle.net/20.500.12708/71932 ( reposiTUm)

Gschohsmann, W., & Nicolics, J. (2010). A model to specify the deformations in ceramic sensor strips subjected to surface displacements in the contact area. In Book of Abstracts (p. 178). http://hdl.handle.net/20.500.12708/71992 ( reposiTUm)

Nagl, B., & Nicolics, J. (2010). Analyses of thermo mechanically related failures of traction IGBT power modules at short circuit switching. In Book of Abstracts. 3rd Electronics System Integration Technology Conference, ESTC 2010, Berlin, Berlin, EU. http://hdl.handle.net/20.500.12708/71999 ( reposiTUm)

Nagl, B., Nicolics, J., & Gschohsmann, W. (2010). Analysis of thermomechanically related failures of traction IGBT power modules at short circuit switching. In 3rd Electronics System Integration Technology Conference ESTC. 3rd Electronics System Integration Technology Conference, ESTC 2010, Berlin. https://doi.org/10.1109/estc.2010.5642915 ( reposiTUm)

Fasching, M., & Nicolics, J. (2009). Investigation of Pulse Load Behavior of Power Wire-Wound Resistors. In ISSE 2009 Conference Proceedings (pp. 184–185). http://hdl.handle.net/20.500.12708/71175 ( reposiTUm)

Nicolics, J., Franz, M., Deepak, V. L., & Weichslberger, G. (2009). Innovative Printed Circuit Board Technology for Heat Removal with Application to Power LED based Operating Room Lamps. In ISSE 2009 Conference Proceedings (pp. 13–17). http://hdl.handle.net/20.500.12708/71215 ( reposiTUm)

Nicolics, J., Franz, M., Deepak, V. L., & Weichslberger, G. (2009). Influence of the Printed Circuit Board on the Assembly’s Thermal Performance by the Example of Power LED based Lamp Prototypes. In ISSE 2009 Conference Proceedings (pp. 62–63). http://hdl.handle.net/20.500.12708/71171 ( reposiTUm)

Wissenwasser, J., Vellekoop, M. J., & Nicolics, J. (2009). Silicone-based Encapsulation of a Cell Culture Measurement Device under Physiological Conditions. In ISSE 2009 Conference Proceedings (pp. 126–127). http://hdl.handle.net/20.500.12708/71174 ( reposiTUm)

Smetana, W., Balluch, B., Atassi, I., Nicolics, J., Gaubitzer, E., Köhler, G., & Edetsberger, M. (2008). Herstellung eines Monitoring-Moduls für Bio-Reaktionen in LTCC-Technologie. In Tagungsband zur Informationstagung Mikroelektronik 08 (pp. 78–81). http://hdl.handle.net/20.500.12708/70419 ( reposiTUm)

Fulmek, P. L., Nicolics, J., & Reider, G. (2008). Demagnetizing Experiments of Yttrium Orthoferrites for Large Aperture Magnetooptical Switch. In ISSE 2008 Conference Proceedings (pp. 251–256). http://hdl.handle.net/20.500.12708/70747 ( reposiTUm)

Atassi, I., Gaubitzer, E., Köhler, G., Edetsberger, M., Smetana, W., & Nicolics, J. (2008). Characterization of a Reactor Module by Means of 3 - Dimensional Finite Element - Analyses. In ISSE 2008 Conference Proceedings (pp. 658–663). http://hdl.handle.net/20.500.12708/70740 ( reposiTUm)

Medek, R., Nicolics, J., & Fulmek, P. L. (2008). Aperture Magnetooptical Switch - First Results with Labor Prototype. In Abstract Proceedings - Reliability and Life-time Prediction (pp. 132–133). http://hdl.handle.net/20.500.12708/70179 ( reposiTUm)

Nicolics, J., Smetana, W., & Fasching, M. (2008). Reliability aspects in solder joints of sealed casings for power applications. In Abstract Proceedings - Reliability and Life-time Predition (pp. 50–51). http://hdl.handle.net/20.500.12708/70180 ( reposiTUm)

Atassi, I., Smetana, W., Gaubitzer, E., Edetsberger, M., Köhler, G., & Nicolics, J. (2008). Performance Optimization of a Reactor Module by Means of 3-Dimensional Finite Element-Analyses. In Abstract Proceedings - Reliability and Life-time Prediction (pp. 304–305). http://hdl.handle.net/20.500.12708/70176 ( reposiTUm)

Hauser, H., Giouroudi, I., Nicolics, J., Rieger, G., Wecker, J., & Daalmans, G. (2007). MI Effect in Amorphous CoFe Thin film Trilayers and Demonstrator Packaging. In Proc. of 30th Int. Spring Seminar on Electronics Technology (pp. 281–286). http://hdl.handle.net/20.500.12708/70064 ( reposiTUm)

Nicolics, J., Mündlein, M., Hanreich, G., Zluc, A., Stahr, H., & Franz, M. (2007). Thermal Analysis of Multilayer Printed Circuit Boards with Embedded Carbon Black-Polymer Resistors. In Proc. of 30th Int. Spring Seminar on Electronics Technology (pp. 46–52). http://hdl.handle.net/20.500.12708/70065 ( reposiTUm)

Medek, R., Hauser, H., & Nicolics, J. (2007). Development of a Miniaturized Orthoferrite Based Optical Switch with Improved Electromagnetic Compatibility - First Results. In Book of Abstracts of 30th Int. Spring Seminar on Electronics Technology (pp. 180–181). http://hdl.handle.net/20.500.12708/70066 ( reposiTUm)

Hauser, H., Giouroudi, I., Nicolics, J., Ludwig, K., Rieder, G., Wecker, J., & Daalmans, G. (2007). Magnetoimpedance effect in amorphous thin film trilayers. In Book of Abstracts of 30th Int. Spring Seminar on Electronics Technology (pp. 140–141). http://hdl.handle.net/20.500.12708/70067 ( reposiTUm)

Medek, R., Nicolics, J., & Hauser, H. (2007). Recent Progresses on the Development of an Yttrium Orthoferrite Based Optical Switch. In IEEE Proc. of 30th Int. Spring Seminar on Electronics Technology (pp. 361–366). http://hdl.handle.net/20.500.12708/70063 ( reposiTUm)

Nicolics, J., Mündlein, M., Hanreich, G., Franz, M., Zluc, A., & Stahr, H. (2007). Thermal Analysis of Embedded Carbon-Polymer Resistors in Multilayer Printed Circuit Boards. In Book of Abstracts of 30th Int. Spring Seminar on Electronics Technology (pp. 50–51). http://hdl.handle.net/20.500.12708/70068 ( reposiTUm)

Fasching, M., Nicolics, J., & Mündlein, M. (2006). Minimierung des thermischen Widerstands von SMT-Leistungsbauelementen auf Leiterplatten für Hochtemperaturanwendungen. In GMM-Fachbericht No. 50 (pp. 189–194). http://hdl.handle.net/20.500.12708/70071 ( reposiTUm)

Giouroudi, I., Hauser, H., Nicolics, J., & Musiejovsky, L. (2006). GMI Effect in Laser Micromachined Wire-Sensors. In Magnetic Measurements ’06 - The Book of Abstracts (pp. 95–96). Slovak University of Technology. http://hdl.handle.net/20.500.12708/69459 ( reposiTUm)

Andrijasevic, D., Brenner, W., & Nicolics, J. (2006). Multilayer Adhesive Bonding Under Hot Air Stream. In Junior Scientist Conference 2006 - Proceedings (pp. 89–90). http://hdl.handle.net/20.500.12708/69522 ( reposiTUm)

Zoppel, S., Zehetner, J., Musiejovsky, L., Hauser, H., & Nicolics, J. (2006). Laser Micromachining for GMI-Sensors. In Book of Abstracts (p. 147). http://hdl.handle.net/20.500.12708/69510 ( reposiTUm)

Mündlein, M., Fasching, M., & Nicolics, J. (2006). Optimization of Thermal Performance of D2PAK-SMD Assemblies for High-Temperature Applications. In Dornbirner Mikrotechniktage 2006 - Technologie, Verfahren und Anwendungen der Mikrotechnik (pp. 1–3). http://hdl.handle.net/20.500.12708/69134 ( reposiTUm)

Mündlein, M., Valentin, B., Chabicovsky, R., Nicolics, J., Weremczuk, J., Tarapata, G., & Jachowicz, R. (2006). Transepidermal Water Loss (TEWL) Measurements with Two Novel Sensors Based on Different Sensing Priciples. In Proceedings EUROSENSORS 2006 (pp. 348–349). http://hdl.handle.net/20.500.12708/69209 ( reposiTUm)

Nicolics, J., Musiejovsky, L., Mündlein, M., Hauser, H., & Zehetner, J. (2006). Laser Welding Process Optimization for the Production of Magnetic Field Sensors. In Conference Program and Abstracts (pp. 214–215). http://hdl.handle.net/20.500.12708/69517 ( reposiTUm)

Zoppel, S., Partl, S., Nicolics, J., Reider, G., & Zehetner, J. (2006). Laserablation und ihre Anwendung in der Mikrotechnik. In Dornbirner Mikrotage 2006 - Technologie, Verfahren und Anwendungen der Mikrotechnik (pp. 20–24). http://hdl.handle.net/20.500.12708/70069 ( reposiTUm)

Nicolics, J., Musiejovsky, L., Mündlein, M., Zehetner, J., Steurer, J., Giouroudi, I., & Hauser, H. (2006). Laser Welding Process and Packaging for Magnetic Field Sensors. In Proc. of. 29th Int. Spring Seminar on Electronics Technology (pp. 469–474). http://hdl.handle.net/20.500.12708/70070 ( reposiTUm)

Hauser, H., Steurer, J., Mündlein, M., Giouroudi, I., Musiejovsky, L., Zehetner, J., & Nicolics, J. (2006). Laser Welding of GMI-Wire for Magnetic Field Sensors. In Tagungsband Informationstagung Mikroelektronik 06 (pp. 86–92). http://hdl.handle.net/20.500.12708/69512 ( reposiTUm)

Mündlein, M., & Nicolics, J. (2005). Simulating the Contact Formation in Isotropically conductive Adhesives. In Book of Abstracts - 28th ISSE 2005 (pp. 100–101). http://hdl.handle.net/20.500.12708/68810 ( reposiTUm)

Didosyan, Y. S., Hauser, H., Reider, G., & Nicolics, J. (2005). Synchronization Measurement of a Polarization Independent Magneto-Optical Switch. In Proceedings of the 28th ISSE (pp. 69–71). IEEE Press. http://hdl.handle.net/20.500.12708/68617 ( reposiTUm)

Brandl, M., Kellner, K.-H., Mündlein, M., & Nicolics, J. (2005). Low-Cost Wireless Transponder System for Industrial and Biomedical Applications. In Proceedings ICICS 2005 (pp. 1444–1447). http://hdl.handle.net/20.500.12708/70072 ( reposiTUm)

Mündlein, M., & Nicolics, J. (2005). Electrical Resistance Modeling of Isotropically Conductive Adhesive Joints. In Proc. of. 28th Int. Spring Seminar on Electronics Technology (pp. 144–149). http://hdl.handle.net/20.500.12708/70073 ( reposiTUm)

Mündlein, M., Chabicovsky, R., Nicolics, J., Valentin, B., Svasek, P., Svasek, E., Komeda, T., Funakubo, H., Nagashima, T., & Ito, M. (2005). Microsensor for the Measurement of the Transepidermal Water Loss of Human Skin. In K. Riedling (Ed.), Proceedings of the Seminar GMe Forum 2005 (p. 4). http://hdl.handle.net/20.500.12708/68536 ( reposiTUm)

Valentin, B., Mündlein, M., Chabicovsky, R., & Nicolics, J. (2005). Novel Microsensor for the Measurement of the Transepidermal Water Loss of Human Skin. In Proceedings Volume I (pp. 173–178). http://hdl.handle.net/20.500.12708/68531 ( reposiTUm)

Valentin, B., Mündlein, M., Chabicovsky, R., & Nicolics, J. (2005). Thin Film Sensor for Transepidermal Water Loss Measurement - Calibration Method and Application to Human Skin. In Proceedings of 28th ISSE 2005 (pp. 64–68). http://hdl.handle.net/20.500.12708/68555 ( reposiTUm)

Valentin, B., Mündlein, M., Nicolics, J., & Chabicovsky, R. (2005). Calibration of a Thin Film Sensor for Transepidermal Water Loss Measurement. In Book of Abstracts - 28th ISSE 2005 (pp. 84–85). http://hdl.handle.net/20.500.12708/68554 ( reposiTUm)

Hanreich, G., Bychikhin, S., Pogany, D., Marso, M., Kordos, P., & Nicolics, J. (2005). Thermal Simulation and Charakterization of AlGaN/GaN/Si High Electron Mobility Transistors. In ISSE 2005 - 28th International Spring Seminar on Electronics Technology (pp. 106–107). Österreichischer Verband für Elektrotechnik, Wien. http://hdl.handle.net/20.500.12708/68806 ( reposiTUm)

Nicolics, J., & Walla, T. (2019). Embedded Components. In Handbuch der Leiterplattentechnik (pp. 1–91). Leuze Verlag. http://hdl.handle.net/20.500.12708/30208 ( reposiTUm)

Nicolics, J., & Mündlein, M. (2007). Electrically Conductive Adhesives. In Micro- and Opto-Eletronic Materials and Structures: Physics, Mechanics, Design, Reliability, Packaking, Volume 2 (pp. 571–610). Springer-Verlag. http://hdl.handle.net/20.500.12708/25048 ( reposiTUm)

Pietrikova, A., Wohlrabe, H., Nicolics, J., & Unger, M. (Eds.). (2020). 43rd International Spring Seminar on Electronics Technology: “Trends in Microelectronics Packaging and Interconnection Technology” - Book of Extended Abstracts. IEEE. http://hdl.handle.net/20.500.12708/24786 ( reposiTUm)

Malecha, K., Rac-Rumijowska, O., Markowski, P., Wohlrabe, H., Nicolics, J., & Unger, M. (Eds.). (2019). 42th International Spring Seminar on Electronics Technology - ISSE 2019. Oficyna Wydawnicza Politechniki Wrocławskiej. http://hdl.handle.net/20.500.12708/24680 ( reposiTUm)

Harsanyi, G., Wohlrabe, H., Franz, M., Krammer, O., Geczy, A., Balazs, I., & Nicolics, J. (Eds.). (2015). 38th International Spring Seminar on Electronics Technology, Book of Abstracts. Budapest University of Technology and Economics. http://hdl.handle.net/20.500.12708/24045 ( reposiTUm)

Franz, M., Krammer, O., Nicolics, J., & Wohlrabe, H. (Eds.). (2015). Proceedings of the 38th International Spring Seminar on Electronics Technology. IEEE - Institute of Electrical and Electronics Engineers, Inc. http://hdl.handle.net/20.500.12708/24046 ( reposiTUm)

Franz, M., Nicolics, J., & Wohlrabe, H. (Eds.). (2014). Proceedings of the 2014 37th International Spring Seminar on Electronics Technology. IEEE Xplore. http://hdl.handle.net/20.500.12708/23869 ( reposiTUm)

Wohlrabe, H., Franz, M., & Nicolics, J. (Eds.). (2014). 37th International Spring Seminar on Electronics Technology: Book of Abstracts. Verlag Dr. Markus A. Detert. http://hdl.handle.net/20.500.12708/23900 ( reposiTUm)

Ceuca, E., Franz, M., & Nicolics, J. (Eds.). (2013). Book of Abstracts - 36th International Spring Seminar on Electronics Technology - ISSE. ″1 Decembrie 1918″ University, Alba Iulia, Romania. http://hdl.handle.net/20.500.12708/23684 ( reposiTUm)

Franz, M., Nicolics, J., & Ceuca, E. (Eds.). (2013). Proceedings of the 2013 36th International Spring Seminar on Electronics Technology. IEEE - Institute of Electrical and Electronics Engineers, Inc. http://hdl.handle.net/20.500.12708/23685 ( reposiTUm)

Franz, M., & Nicolics, J. (Eds.). (2012). 35th International Spring Seminar on Electronics Technology (ISSE 2012). Book of Abstracts. Institut für Sensor- und Aktuatorsysteme, Technische Universität Wien. http://hdl.handle.net/20.500.12708/23584 ( reposiTUm)

Franz, M., & Nicolics, J. (Eds.). (2012). Proceedings of the 2012 35th International Spring Seminar on Electronics Technology - Power Electronics. IEEE - Institute of Electrical and Electronics Engineers, Inc. http://hdl.handle.net/20.500.12708/23585 ( reposiTUm)

Pietrikova, A., Franz, M., & Nicolics, J. (Eds.). (2011). Abstracs Proceedings:34th International Spring Seminar on Electronics Technology - New Trends in Micro/Nanotechnology. ISSE 2011. http://hdl.handle.net/20.500.12708/23346 ( reposiTUm)

Franz, M., & Nicolics, J. (Eds.). (2011). Conference Proceedings: 34th International Spring Seminar on Electronics Technology-New Trends in Micro/Nanotechnology. Institute of Electrical and Electronics Engineers, Inc. http://hdl.handle.net/20.500.12708/23347 ( reposiTUm)

Nicolics, J. (Ed.). (2010). 2010 33rd International Spring Seminar on Electronics Technology. Polymer Electronics and Nanotechnologies: Towards System Integration. Conference Proceedings. IEEE Press. http://hdl.handle.net/20.500.12708/23246 ( reposiTUm)

Nicolics, J., & Hauser, H. (Eds.). (2005). 28th International Spring Seminar on Electronics Technology. ÖVE. http://hdl.handle.net/20.500.12708/22100 ( reposiTUm)

Goekdeniz, Z., Khatibi, G., & Nicolics, J. (2019). Fatigue behavior of Ag-sintered joints. 29th Colloquium on Fatigue Mechanisms, Brno, Czechia. http://hdl.handle.net/20.500.12708/101268 ( reposiTUm)

Goekdeniz, Z., Khatibi, G., & Nicolics, J. (2019). Fatigue Behavior of Sintered Cu-Ag-Cu Lap-joints. Infineon InnoWeek 2019 Regensburg, Regensburg, Germany. http://hdl.handle.net/20.500.12708/101269 ( reposiTUm)

Goekdeniz, Z., Khatibi, G., & Nicolics, J. (2019). Influence of Temperature on Mechanical Fatigue of Sintered Cu-Ag-Cu Joints. Infineon InnoWeek Campeon München, München, Germany. http://hdl.handle.net/20.500.12708/101270 ( reposiTUm)

Miskovic, G., Aleksic, O. S., Nikolic, M., Nicolics, J., Radosavljevic, G., Vasiljevic, Z. Z., & Lukovic, M. D. (2015). Nanostructured SnO2 thick films for gas sensor application: analysis of structural and electronic properties. 5th International Conference on Materials and Applications for Sensors and Transducers (IC-MAST 2015), Mykonos Island, Greece, EU. http://hdl.handle.net/20.500.12708/90634 ( reposiTUm)

Nicolics, J. (2012). Gegenüberstellung von Messungen mit zwei High-End-Thermographie-Systemen mit unterschiedlicher spektraler Sensitivität am Beispiel der thermischen Untersuchung von Sensor-Heizelementen. Thermografie-Forum, Eugendorf, Austria. http://hdl.handle.net/20.500.12708/89981 ( reposiTUm)

Nicolics, J. (2011). Thermisches Management in der Elektronik. 14. Europäisches Elektroniktechnologie-Kolleg, Colonia de Sant Jordi, Mallorca, EU. http://hdl.handle.net/20.500.12708/89589 ( reposiTUm)

Nicolics, J. (2010). LTCC technology, electronic packaging, thermal managment. Eureka IPCTECH Kick-off Meeting, Vienna, Austria, Austria. http://hdl.handle.net/20.500.12708/89423 ( reposiTUm)

Nicolics, J. (2010). Thermal Management - Messung und Simulationsmethoden - und Anwendung auf PCBs mit embedded High-Power-LEDs. Joanneum Research, Weiz, Austria. http://hdl.handle.net/20.500.12708/89480 ( reposiTUm)

Nicolics, J. (2010). Overview of the department’s activities and proposed contributions to thermal management for Board-on-Board Technology. Partner-Evaluierung von Thales, Colombes, Frankreich für die Aufnahme in ein Partnerkonsortium eines Forschungsprojekts mit Eureka-Label, Vienna, Austria. http://hdl.handle.net/20.500.12708/89479 ( reposiTUm)

Nicolics, J. (2010). Board on Board Technology EURIPIDES Project BoB EUR-10-101. Forschungskooperations-Meeting Thales, Colombes, Frankreich, EU. http://hdl.handle.net/20.500.12708/89481 ( reposiTUm)

Nicolics, J. (2010). Thermographie zur Qualitätssicherung bei der LED-Fertigung und Messung der Wärmeleitfähigkeit von Kunststoff-Folien. Forschungskooperations-Meeting Tridonic GmbH, Jennersdorf, Austria, Austria. http://hdl.handle.net/20.500.12708/89478 ( reposiTUm)

Nicolics, J. (2010). Advanced LED Modules and Light Engines for Professional Lighting. Joanneum Research, Weiz, Austria. http://hdl.handle.net/20.500.12708/89482 ( reposiTUm)

Nicolics, J. (2009). Thermal Management with Application to High Power LED Lamps. 4M Workshop “Devices for Harsh Environmental Applications,” Vienna, Austria. http://hdl.handle.net/20.500.12708/89177 ( reposiTUm)

Nicolics, J. (2009). Power-LED-basierte Operationsleuchten - Thermal Management. AT&S-Klagenfurt, Klagenfurt, Austria. http://hdl.handle.net/20.500.12708/89179 ( reposiTUm)

Nicolics, J. (2009). hermisch-optimiertes PCB-Design für neue LED Packages, Vorstellung erster Simulationsergebnisse, Vorstellung der Forschungsergebnisse von TU Wien. OSRAM Workshop, Regensburg, D, EU. http://hdl.handle.net/20.500.12708/89178 ( reposiTUm)

Nicolics, J. (2009). hermal Management - Solutions for Power LEDs by Cooperative Research. AT&S-Klagenfurt, Klagenfurt, Austria. http://hdl.handle.net/20.500.12708/89180 ( reposiTUm)

Nicolics, J. (2009). Entwärmung durch innovative Leiterplattentechnologie am Beispiel eines Operations-scheinwerfers auf LED-Basis. 6. AT&S-Technologieforum, Leoben-Hinterberg, Austria. http://hdl.handle.net/20.500.12708/89070 ( reposiTUm)

Hanreich, G., & Nicolics, J. (2001). Laserentlöten von Leadless Packages. Elektroniktechnologie-Kolloquium, Wien, Ö, Austria. http://hdl.handle.net/20.500.12708/87751 ( reposiTUm)

Illyefalvi-Vitez, Z., Golonka, L., Mach, P., Nicolics, J., & Svasta, P. (2000). Networking the Electronics Packaging Education. 50th Electronic Components and Technology Conf. ECTE, Las Vegas, Austria. http://hdl.handle.net/20.500.12708/87367 ( reposiTUm)

Sekiguchi, N., Komeda, T., Funakubo, H., Chabicovsky, R., Nicolics, J., & Stangl, G. (2000). Microsensor for the Measurement of Water Content in the Human Skin. 14th European Conference on Solid-State Transducers (Eurosensors 2000), Copenhagen, Denmark, Austria. http://hdl.handle.net/20.500.12708/87885 ( reposiTUm)

Nicolics, J. (1998). A New Method for Measuring the Dynamic Wettability under Dip and Wave Soldering Conditions. Technisches Know-how für die Wiener Wirtschaft, WIFI Wien, Austria. http://hdl.handle.net/20.500.12708/87355 ( reposiTUm)

Nicolics, J. (1998). Packaging. Technisches Know-how für die Wiener Wirtschaft, WIFI Wien, Austria. http://hdl.handle.net/20.500.12708/87354 ( reposiTUm)

Nicolics, J. (1997). Comparison of the Thermal Performance of Plastic and Ceramic Packages. Int. Workshop on Components off the Shelf (COTS), Arcachon, Austria. http://hdl.handle.net/20.500.12708/87352 ( reposiTUm)

Chabicovsky, R., & Nicolics, J. (1997). Dünnschicht-Thermoelemente aus W-NiCr für die thermische Analyse eines Laser-Lötprozesses. Fachtagung Miniaturisierung durch Mikrosystemtechnik (Sensorik, Aktorik, Mikromechanik), Wien, Austria, Austria. http://hdl.handle.net/20.500.12708/87332 ( reposiTUm)

Nicolics, J., & Chabicovsky, R. (1997). Einsatz des Lasers für die Montage von Sensoren. Graduierten Kolleg Sensorik, Dresden, Germany, Austria. http://hdl.handle.net/20.500.12708/87331 ( reposiTUm)

Nicolics, J. (1997). Über den dynamischen Benetzungsprozeß und seine Nutzung zur Qualitätssicherung beim Laserlöten. Habilitationskolloquium, TU-Wien, TU-Wien, Austria. http://hdl.handle.net/20.500.12708/87347 ( reposiTUm)

Nicolics, J. (1997). Simulation des thermischen Verhaltens integrierter Halbleiterbauelemente. Fachvortrag zur Anbahnung einer Kooperation, AMS, Schloß Premstätten, Austria. http://hdl.handle.net/20.500.12708/87348 ( reposiTUm)

Chabicovsky, R., & Nicolics, J. (1997). Interconnection of Thin-Film Sensors with Laser. Wifi und FFF-Fachtagung für Mikrosystemtechnik, Wien, Austria. http://hdl.handle.net/20.500.12708/87350 ( reposiTUm)

Nicolics, J. (1997). Laserlöten. Zentrum für mikrotechnische Produktion, TU-Dresden, Austria. http://hdl.handle.net/20.500.12708/87349 ( reposiTUm)

Nicolics, J. (1997). Interconnection Techniques for Sensors - A Review of Research Activities and Industry Cooperations. International Spring Seminar on Electronics Technology (ISSE), Wr. Neustadt, Austria, Austria. http://hdl.handle.net/20.500.12708/87351 ( reposiTUm)

Homolka, H., Nicolics, J., & Radosavljevic, G. (2011). Analysis Report on Failure Cause of a Backlight - Converter - Unit. http://hdl.handle.net/20.500.12708/36992 ( reposiTUm)

Nicolics, J. (2011). Experimentelle Studie des Kontaktwiderstandes von passivierten Aluminiumteilen. http://hdl.handle.net/20.500.12708/36980 ( reposiTUm)

Atassi, I., & Nicolics, J. (2011). Report - Vorstudie zur Anbindung thermoelektrischer Generatoren (TEG) auf gewölbten Flächen. http://hdl.handle.net/20.500.12708/37099 ( reposiTUm)

Medek, R., & Nicolics, J. (2011). Studie über Akkutechnologien für einspurige Elektro-Kraftfahrzeuge. http://hdl.handle.net/20.500.12708/37160 ( reposiTUm)

Medek, R., & Nicolics, J. (2011). Untersuchung der Feuchtediffunsion in miniaturisierten Temperaturloggern für medizinische Anwendungen und Lebensdaueruntersuchungen an Lithiumbatterien. http://hdl.handle.net/20.500.12708/37161 ( reposiTUm)

Nicolics, J. (2010). Bericht über die Messung der Wärmeleitfähigkeit von Phosphoren-dotierten Polymeren für High-Power-LEDs. http://hdl.handle.net/20.500.12708/36748 ( reposiTUm)

Nicolics, J. (2010). Vergleichende Untersuchung der thermischen Performance von High-Power-LED-Baugruppen. http://hdl.handle.net/20.500.12708/36755 ( reposiTUm)

Nicolics, J. (2010). Untersuchung von thermischen Farbindikatoren für Power-LED-Anwendungen. http://hdl.handle.net/20.500.12708/36756 ( reposiTUm)

Nicolics, J. (2010). Untersuchung der packaging-bedingten Dehnung eines Temperatursensors. http://hdl.handle.net/20.500.12708/36758 ( reposiTUm)

Nicolics, J. (2010). Thermographische Bestimmung des Emissionsgrades von metallisierten Kunststoff-Folien. http://hdl.handle.net/20.500.12708/36757 ( reposiTUm)

Nicolics, J. (2009). Messung des Kontaktwiderstandes von passivierten Aluminiumteilen. http://hdl.handle.net/20.500.12708/36021 ( reposiTUm)

Nicolics, J. (2007). Bestimmung des dielektrischen Verhaltens von Lackisolationen auf Flach-Kupferdrähten. http://hdl.handle.net/20.500.12708/31406 ( reposiTUm)

Nicolics, J. (2007). Untersuchungen zur Zuverlässigkeit der Kontaktierung von Flüssigkristallanzeigen von Pedometer. http://hdl.handle.net/20.500.12708/31404 ( reposiTUm)

Nicolics, J. (2007). Untersuchung zur Sicherstellung der Langzeitzuverlässigkeit von Kontakten in Mikrofonkapseln. http://hdl.handle.net/20.500.12708/31405 ( reposiTUm)

Nicolics, J. (2007). Joining Techniques and Application. http://hdl.handle.net/20.500.12708/31383 ( reposiTUm)

Nicolics, J. (2007). Overview of Circuit Manufacturing: Printed Circuit-, Thin Film-, and Thick Film Technology. http://hdl.handle.net/20.500.12708/31382 ( reposiTUm)

Nicolics, J. (2007). Thermal Management. http://hdl.handle.net/20.500.12708/31384 ( reposiTUm)

Nicolics, J. (2006). Metallographische Untersuchung von Lötverbindungen an AlSiC-Modulen. http://hdl.handle.net/20.500.12708/31408 ( reposiTUm)

Nicolics, J. (2006). Voruntersuchungen zum Bestücken einer Powermatrix - Teil I: Laserlöten. http://hdl.handle.net/20.500.12708/31407 ( reposiTUm)

Nicolics, J. (2006). Umsetzung eines biokompatiblen Packaging-Konzepts für ein in Zahnspangen integrierbares Temperaturmesssystem - Zusammenfassender Abschlussbericht. http://hdl.handle.net/20.500.12708/31409 ( reposiTUm)

Nicolics, J. (2005). Simulation des thermischen Verhaltens von Multilayern mit integrierten optischen Bauelementen. http://hdl.handle.net/20.500.12708/31410 ( reposiTUm)

Nicolics, J. (2005). Thermische Charakterisierung von Multilayern mit integrierten Wärmequellen - Projektstufe II. http://hdl.handle.net/20.500.12708/31412 ( reposiTUm)

Nicolics, J. (2005). Temperature dependent Misalignment of Optical Axis in Orthoferrite Crystals and Temperature Compensation. http://hdl.handle.net/20.500.12708/31413 ( reposiTUm)

Nicolics, J. (2005). Verhalten von Heizbändern, eingesetzt in Kochmulden. http://hdl.handle.net/20.500.12708/31414 ( reposiTUm)

Hauser, H., & Nicolics, J. (1997). Fertigungsmöglichkeiten von Magneto-Impedanz-Sensoren für die Sicherheitstechnik. http://hdl.handle.net/20.500.12708/30922 ( reposiTUm)

Hauser, H., & Nicolics, J. (1997). Möglichkeiten zum Lesen von magnetischem Bar-Code mittels Magneto-Impedanz-Effekt. http://hdl.handle.net/20.500.12708/30921 ( reposiTUm)

Nicolics, J. (1996). Basisuntersuchungen für die Einsetzbarkeit anorganischer ätzmedien zum ätzen dicker AlSiMn-Schichten. http://hdl.handle.net/20.500.12708/30929 ( reposiTUm)

Nicolics, J. (1996). Untersuchung der Nutzbarkeit der Infrarotstrahlungsemission während des Laserlötens von Fine-Pitch-Bauelementen. http://hdl.handle.net/20.500.12708/30930 ( reposiTUm)

Nicolics, J. (1996). Charakterisierung, Herstellung und Trennung anisotrop leitfähiger Klebeverbindungen an Flüssigkristallbildschirmen. http://hdl.handle.net/20.500.12708/30928 ( reposiTUm)

Nicolics, J. (2018). Editorial - Thermal Management. PLUS - Produktion von Leiterplatten Und Systemen, 1, 1. http://hdl.handle.net/20.500.12708/144651 ( reposiTUm)

Silvano de Sousa, J., Unger, M., Fulmek, P. L., Haumer, P., & Nicolics, J. (2018). Erhöhtes Wärmespreiz-vermögen von Leiterplatten durch eingebettete Heat-Pipes. PLUS - Produktion von Leiterplatten Und Systemen, 2, 290–299. http://hdl.handle.net/20.500.12708/144650 ( reposiTUm)

Nicolics, J. (2012). Thermal Management. PLUS - Produktion von Leiterplatten Und Systemen, 14(10), 2089. http://hdl.handle.net/20.500.12708/164447 ( reposiTUm)

Mashkov, P., Gyoch, B., Penchev, S., Beloev, H., & Nicolics, J. (2012). Equipment and Method for Power LEDs’ Thermal Loading Testing During Operation. PLUS - Produktion von Leiterplatten Und Systemen, 14(12), 2738–2742. http://hdl.handle.net/20.500.12708/164956 ( reposiTUm)