Rammerstorfer, F. (2024). Buckling of stretched strips - reconsidered and extended. Computers and Structures, 290, Article 107193. https://doi.org/10.1016/j.compstruc.2023.107193 ( reposiTUm)

Rammerstorfer, F. (2024). A note on structural mode transitions in buckling of radially stretched annular plates. Acta Mechanica, 235(9), 5937–5946. https://doi.org/10.1007/s00707-024-04012-y ( reposiTUm)

Faghfouri, S., & Rammerstorfer, F. (2022). Buckling of stretched disks—With comparisons and extensions to auxetics. International Journal of Mechanical Sciences, 213, 1–9. https://doi.org/10.1016/j.ijmecsci.2021.106876 ( reposiTUm)

Faghfouri, S., & Rammerstorfer, F. G. (2020). Mode transitions in buckling and post-buckling of stretched-twisted strips. International Journal of Non-Linear Mechanics, 127(103609), 103609. https://doi.org/10.1016/j.ijnonlinmec.2020.103609 ( reposiTUm)

Predan, J., Kegl, M., Abart, R., Fischer, F. D., & Rammerstorfer, F. G. (2020). On an alternative approach for simulating chemically induced crack pattern evolutions in a single crystal. International Journal of Solids and Structures, 202, 575–586. https://doi.org/10.1016/j.ijsolstr.2020.06.006 ( reposiTUm)

Gracia, J. B., & Rammerstorfer, F. (2019). Increase in buckling loads of plates by introduction of cutouts. Acta Mechanica, 230, 2873–2889. https://doi.org/10.1007/s00707-019-02435-6 ( reposiTUm)

Rammerstorfer, F. G. (2018). Buckling of elastic structures under tensile loads. Acta Mechanica, 229(2), 881–900. https://doi.org/10.1007/s00707-017-2006-1 ( reposiTUm)

Rammerstorfer, F., Bauer, S., & Scheidl, J. (2018). Analytical modelling of autofrettage processes - Historical approaches and new results. Proceedings in Applied Mathematics and Mechanics, 18(1). https://doi.org/10.1002/pamm.201800119 ( reposiTUm)

Toth, F., Kirchlechner, C., Fischer, F. D., Dehm, G., & Rammerstorfer, F. G. (2017). Compressed Bi-Crystal Micropillars Showing a Sigmoidal Deformation State - A Computational Study. Materials Science and Engineering: A, 700, 168–174. https://doi.org/10.1016/j.msea.2017.05.098 ( reposiTUm)

Kirchlechner, C., Toth, F., Rammerstorfer, F. G., Fischer, F. D., & Dehm, G. (2017). Pre- and Post-Buckling Behavior of Bi-Crystalline Micropillars: Origin and Consequences. Acta Materialia, 124, 195–203. https://doi.org/10.1016/j.actamat.2016.10.075 ( reposiTUm)

Rammerstorfer, F. G., & Daum, B. (2016). The symmetric buckling mode in laminated elastoplastic micro-structures under plane strain. Acta Mechanica, 227, 2843–2859. https://doi.org/10.1007/s00707-016-1645-y ( reposiTUm)

Nyashin, Y., Nyashin, M., Osipenko, M., Lokhov, V., Dubinin, A., Rammerstorfer, F., & Zhurov, A. (2016). Centre of Resistance and Centre of Rotation of a Tooth: Experimental Determination, Computer Simulation and the Effects of Tissue Nonlinearity. Computer Methods in Biomechanics and Biomedical Engineering, 19(3), 229–239. https://doi.org/10.1080/10255842.2015.1007961 ( reposiTUm)

Antretter, T., Fischer, F. D., Rammerstorfer, F. G., & Zickler, G. A. (2016). Free Edges at Bilayered Compounds - A Short Analytical and Numerical Reconsideration. Archive of Applied Mechanics, 86(12), 2053–2061. https://doi.org/10.1007/s00419-016-1171-3 ( reposiTUm)

Bartosik, M., Todt, M., Holec, D., Todt, J., Zhou, L., Riedl, H., Böhm, H. J., Rammerstorfer, F. G., & Mayrhofer, P. H. (2015). Thermal Expansion of Rock-Salt Cubic AlN. Applied Physics Letters, 107(7), 071602. https://doi.org/10.1063/1.4928911 ( reposiTUm)

Marx, V. M., Toth, F., Wiesinger, A., Berger, J., Kirchlechner, C., Cordill, M. J., Fischer, F. D., Rammerstorfer, F. G., & Dehm, G. (2015). The Influence of a Brittle Cr Interlayer on the Deformation Behavior of thin Cu Films on Flexible Substrates: Experiment and Model. Acta Materialia, 89, 278–289. https://doi.org/10.1016/j.actamat.2015.01.047 ( reposiTUm)

Todt, M., Toth, F., Hartmann, M. A., Holec, D., Cordill, M. J., Fischer, F. D., & Rammerstorfer, F. G. (2014). Computational Simulation of Instability Phenomena in Nanoparticles and Nanofilms. Computational Technology Reviews, 10, 89–119. https://doi.org/10.4203/ctr.10.4 ( reposiTUm)

Skrna-Jakl, I. C., Pahr, D. H., Karner, K. H., & Rammerstorfer, F. G. (2014). Homogenization Technique for the Efficient Modeling of Large Scale Corrugated Core Sandwich Structures. International Journal of Applied Physics and Mathematics, 4(1), 62–67. https://doi.org/10.7763/ijapm.2014.v4.256 ( reposiTUm)

Todt, M., Bitsche, R. D., Hartmann, M. A., Fischer, F. D., & Rammerstorfer, F. G. (2014). Growth Limit of Carbon Onions - A Continuum Mechanical Study. International Journal of Solids and Structures, 51(3–4), 706–715. https://doi.org/10.1016/j.ijsolstr.2013.10.038 ( reposiTUm)

Daum, B., Dehm, G., Clemens, H., Rester, M., Fischer, F. D., & Rammerstorfer, F. G. (2013). Elastoplastic Buckling as Source of Misinterpretation of Micropillar Tests. Acta Materialia, 61(13), 4996–5007. https://doi.org/10.1016/j.actamat.2013.04.046 ( reposiTUm)

Toth, F., Rammerstorfer, F. G., Cordill, M. J., & Fischer, F. D. (2013). Detailed Modelling of Delamination Buckling of Thin Films under Global Tension. Acta Materialia, 61(7), 2425–2433. https://doi.org/10.1016/j.actamat.2013.01.014 ( reposiTUm)

Hartmann, M. A., Todt, M., Rammerstorfer, F. G., Fischer, F. D., & Paris, O. (2013). Elastic Properties of Graphene Obtained by Computational Mechanical Tests. EPL, 103(6), 68004. https://doi.org/10.1209/0295-5075/103/68004 ( reposiTUm)

Bilik, C., Pahr, D. H., & Rammerstorfer, F. G. (2012). A Bead Laying Algorithm for Enhancing the Stability and Dynamic Behavior of Thin-Walled Structures. Acta Mechanica, 223(8), 1621–1631. https://doi.org/10.1007/s00707-012-0645-9 ( reposiTUm)

Eberhardsteiner, J., Böhm, H. J., Rammerstorfer, F. G., Mang, H. A., & Pöll, M. (2012). ECCOMAS 2012 - Sixth European Congress on Computational Methods in Applied Sciences and Engineering. Computer Assisted Methods in Engineering and Science, 19, 305–308. http://hdl.handle.net/20.500.12708/164994 ( reposiTUm)

Todt, M., Rammerstorfer, F. G., Fischer, F. D., Mayrhofer, P. H., Holec, D., & Hartmann, M. A. (2011). Continuum Modeling of van der Waals Interactions Between Carbon Onion Layers. Carbon, 49(5), 1620–1627. https://doi.org/10.1016/j.carbon.2010.12.045 ( reposiTUm)

Bilik, C., Rammerstorfer, F., Figala, G., & Buchmayr, B. (2011). Computational modelling of laser treatment of plates for increased buckling loads and natural frequencies. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 225(10), 2385–2398. https://doi.org/10.1177/0954406211411866 ( reposiTUm)

Cordill, M. J., Fischer, F. D., Rammerstorfer, F. G., & Dehm, G. (2010). Adhesion Energies of Cr Thin Films on Polyimide Determined from Buckling: Experiment and Model; Acta Materialia, 58(16), 5520–5531. https://doi.org/10.1016/j.actamat.2010.06.032 ( reposiTUm)

Daxner, T., Fischer, F. D., & Rammerstorfer, F. G. (2010). Stability of Rod-Shaped Nanoparticles Embedded in an Elastic Matrix. Philosophical Magazine, 90(15), 2027–2048. https://doi.org/10.1080/14786430903520740 ( reposiTUm)

Todt, M., Rammerstorfer, F. G., Paris, O., & Fischer, F. D. (2010). Nanomchanical Studies of the Compressive Behavior of Carbon Fibers. Journal of Materials Science, 45(24), 6845–6848. https://doi.org/10.1007/s10853-010-4941-2 ( reposiTUm)

Holec, D., Hartmann, M. A., Fischer, F. D., Rammerstorfer, F. G., Mayrhofer, P. H., & Paris, O. (2010). Curvature-Induced Excess Surface Energy of Fullerenes: Density Functional Theory and Monte Carlo Simulations. Physical Review B, 81(235403). https://doi.org/10.1103/physrevb.81.235403 ( reposiTUm)

Schuller-Götzburg, P., Pleschberger, M., Rammerstorfer, F. G., & Krenkel, C. (2009). 3D-FEM and Histomorphology of Mandibular Reconstruction with the Titanium Functionally Dynamic Bridging Plate. International Journal of Oral and Maxillofacial Surgery, 38(12), 1298–1305. https://doi.org/10.1016/j.ijom.2009.07.060 ( reposiTUm)

Hößl, B., Böhm, H. J., Schaber, C. F., Rammerstorfer, F. G., & Barth, F. G. (2009). Finite Element Modeling of Arachnid Slit Sensilla: II. Actual Lyriform Organs and the Face Deformations of the Individual Slits. Journal of Comparative Physiology A: Neuroethology, Sensory, Neural, and Behavioral Physiology, 195(9), 881–894. https://doi.org/10.1007/s00359-009-0467-y ( reposiTUm)

Bitsche, R. D., Khalil, Z., Noster, U., & Rammerstorfer, F. G. (2008). Simulation von Stahl-Leichtmetall Verbundguss Strukturen - Herstellung und mechanisches Verhalten. Druckguss, 2008(07), 283–288. http://hdl.handle.net/20.500.12708/170630 ( reposiTUm)

Hößl, B., Böhm, H. J., Rammerstorfer, F. G., & Barth, F. G. (2007). Finite Element Modeling of Arachnid Slit Sensilla - I. The Mechanical Significance of Different Slit Arrays. Journal of Comparative Physiology A: Neuroethology, Sensory, Neural, and Behavioral Physiology, 193(4), 445–459. https://doi.org/10.1007/s00359-006-0201-y ( reposiTUm)

Rammerstorfer, F. G., Pahr, D. H., Daxner, T., & Vonach, W. K. (2006). Buckling in Thin Walled Micro and Meso Structures of Lightweight Materials and Material Compounds. Computational Mechanics, 37(6), 470–478. https://doi.org/10.1007/s00466-005-0731-0 ( reposiTUm)

Pahr, D. H., & Rammerstorfer, F. G. (2006). Buckling of Honeycomb Sandwiches: Periodic Finite Element Considerations. Computer Modeling in Engineering & Sciences, 12(3), 229–241. http://hdl.handle.net/20.500.12708/174107 ( reposiTUm)

Fischer, F. D., Rammerstorfer, F. G., & Daxner, T. (2006). Flaring - An Analytical Approach. International Journal of Mechanical Sciences, 48(11), 1246–1255. https://doi.org/10.1016/j.ijmecsci.2006.06.004 ( reposiTUm)

Dechant, H.-E., Hößl, B., Rammerstorfer, F. G., & Barth, F. G. (2006). Arthropod Mechanoreceptive Hairs: Modeling the Directionality of the Joint. Journal of Comparative Physiology A: Neuroethology, Sensory, Neural, and Behavioral Physiology, 192(12), 1271–1278. https://doi.org/10.1007/s00359-006-0155-0 ( reposiTUm)

Hößl, B., Böhm, H. J., Rammerstorfer, F. G., Müllan, R., & Barth, F. G. (2006). Studying the deformation of arachnid slit sensilla by a fracture mechanical approach. Journal of Biomechanics, 39(10), 1761–1768. https://doi.org/10.1016/j.jbiomech.2005.05.031 ( reposiTUm)

Daxner, T., Rammerstorfer, F. G., & Fischer, F. D. (2005). Instability Phenomena During the Conical Expansion of Circular Cylindrical Shells. Computer Methods in Applied Mechanics and Engineering, 194(21–24), 2591–2603. https://doi.org/10.1016/j.cma.2004.07.047 ( reposiTUm)

Daxner, T., Luxner, M. H., & Rammerstorfer, F. G. (2005). Pre-Tensioned Belts Overhanging Elastic Rollers. Proceedings in Applied Mathematics and Mechanics, 5(1), 649–650. https://doi.org/10.1002/pamm.200510301 ( reposiTUm)

Fischer, F. D., Friedl, N., Noé, A., & Rammerstorfer, F. G. (2005). A Study of the Buckling Behaviour of Strips and Plates with Residual Stress. Steel Research International, 76(4), 327–335. https://doi.org/10.1002/srin.200506016 ( reposiTUm)

Eberhardsteiner, J., Mang, H. A., & Rammerstorfer, F. (2004). Special Issue of the Fifth World Congress on Computational Mechanics. International Journal for Numerical Methods in Engineering, 60(1), 1–427. http://hdl.handle.net/20.500.12708/175514 ( reposiTUm)

Dechant, H.-E., Rammerstorfer, F. G., & Barth, F. G. (2001). Arthropod Touch Reception: Stimulus Transformation and Finite Element Model of Spider Tactile Hairs. Journal of Comparative Physiology A: Neuroethology, Sensory, Neural, and Behavioral Physiology, 187(4), 313–322. https://doi.org/10.1007/s003590100203 ( reposiTUm)

Rosenkranz, P., Humer, K., Weber, H. W., Pahr, D. H., & Rammerstorfer, F. G. (2001). Static and Dynamic Scaling Experiments on Double Lap Shear Specimens at Room Temperature and at 77 K. Cryogenics, 41(1), 21–25. https://doi.org/10.1016/s0011-2275(01)00042-x ( reposiTUm)

Rammerstorfer, F. G., Fischer, F. D., & Friedl, N. (2001). Buckling of Free Infinite Strips Under Residual Stresses and Global Tension. Journal of Applied Mechanics, 68(3), 399–404. https://doi.org/10.1115/1.1357519 ( reposiTUm)

Daxner, T., Böhm, H. J., Rammerstorfer, F. G., Denzer, R., & Maier, M. (2000). Simulation des elasto-plastischen Materialverhaltens von Metallschaum mit Hilfe von 2D und 3D Einheitszellen-Modellen. Materials Science & Engineering Technology, 31(6), 447–450. https://doi.org/10.1002/1521-4052(200006)31:6<447::aid-mawe447>3.0.co;2-g ( reposiTUm)

Fischer, F. D., Rammerstorfer, F. G., Friedl, N., & Wieser, W. (2000). Buckling Phenomena Related to Rolling and Levelling of Sheet Metal. International Journal of Mechanical Sciences, 42(10), 1887–1910. https://doi.org/10.1016/s0020-7403(99)00079-x ( reposiTUm)

Chimani, C. M., Rammerstorfer, F. G., & Böhm, H. J. (2000). On fiber curvature effects in the analysis of unidirectionally reinforced composite structures. Computer Methods in Applied Mechanics and Engineering, 185(2–4), 191–201. https://doi.org/10.1016/s0045-7825(99)00259-5 ( reposiTUm)

Buryachenko, V. A., & Rammerstorfer, F. G. (2000). On the thermo-elasto-statics of composites with coated randomly distributed inclusions. International Journal of Solids and Structures, 37(23), 3177–3200. https://doi.org/10.1016/s0020-7683(98)00304-7 ( reposiTUm)

Daxner, T., Rammerstorfer, F. G., & Böhm, H. J. (2000). Adaptation of Density Distributions for Optimising Aluminium Foam Structures. Materials Science and Technology, 16(7–8), 935–939. https://doi.org/10.1179/026708300101508720 ( reposiTUm)

Seitzberger, M., Rammerstorfer, F. G., Gradinger, R., Degischer, H. P., Blaimschein, M., & Walch, C. (2000). Experimental Studies on the Quasi-Static Axial Crushing of Steel Columns Filled with Aluminium Foam. International Journal of Solids and Structures, 37(30), 4125–4147. https://doi.org/10.1016/s0020-7683(99)00136-5 ( reposiTUm)

Vonach, W. K., & Rammerstorfer, F. G. (2000). The Effects of In-Plane Core Stiffness on the Wrinkling Behavior of Thick Sandwiches. Acta Mechanica, 141(1–2), 1–10. https://doi.org/10.1007/bf01176803 ( reposiTUm)

Vonach, W. K., & Rammerstorfer, F. G. (2000). Wrinkling of Thick Orthotropic Sandwich Plates under General Loading Conditions. Archive of Applied Mechanics, 70(5), 338–348. https://doi.org/10.1007/s004199900065 ( reposiTUm)

Friedl, N., Rammerstorfer, F. G., & Fischer, F. D. (2000). Buckling of stretched strips. Computers and Structures, 78(1–3), 185–190. https://doi.org/10.1016/s0045-7949(00)00072-9 ( reposiTUm)

Fischer, F. D., & Rammerstorfer, F. G. (2000). A Note on a Simple Recategorisation of Cracks in Fatigue Analysis. Engineering Fracture Mechanics, 66(1), 41–49. https://doi.org/10.1016/s0013-7944(00)00008-4 ( reposiTUm)

Buryachenko, V. A., & Rammerstorfer, F. G. (1999). On the Thermoelasticity of Random Structure Particulate Composites. Zeitschrift Für Angewandte Mathematik Und Physik, 50(6), 934. https://doi.org/10.1007/s000330050187 ( reposiTUm)

Fischer, F. D., & Rammerstorfer, F. G. (1999). A Refined Analysis of Sloshing Effects in Seismically Excited Tanks. International Journal of Pressure Vessels and Piping, 76(10), 693–709. https://doi.org/10.1016/s0308-0161(99)00047-2 ( reposiTUm)

Gradinger, R., & Rammerstorfer, F. G. (1999). On the Influence of Meso-Inhomogeneities on the Crush-Worthiness of Metal Foams. Acta Materialia, 47(1), 143–148. https://doi.org/10.1016/s1359-6454(98)00332-2 ( reposiTUm)

Rammerstorfer, F. G., Plankensteiner, A. F., Fischer, F. D., & Antretter, T. (1999). Hierarchical Models for Simulating the Mechanical Behavior of Heterogeneous Materials - An Approach to High Speed Tool Steels. Materials Science and Engineering: A, 259(1), 73–84. https://doi.org/10.1016/s0921-5093(98)00869-7 ( reposiTUm)

Pettermann, H. E., Plankensteiner, A. F., Böhm, H. J., & Rammerstorfer, F. G. (1999). A Thermo-Elasto-Plastic Constitutive Law for Inhomogeneous Materials Based on an Incremental Mori-Tanaka Approach. Computers and Structures, 71(2), 197–214. https://doi.org/10.1016/s0045-7949(98)00208-9 ( reposiTUm)

Daxner, T., Böhm, H. J., & Rammerstorfer, F. G. (1999). Mesoscopic Simulation of Inhomogeneous Metallic Foams with Respect to Energy Absorption. Computational Materials Science, 16(1–4), 61–69. https://doi.org/10.1016/s0927-0256(99)00046-4 ( reposiTUm)

Seitzberger, M., & Rammerstorfer, F. G. (1999). Study of Axisymmetric Crushing Mechanisms by Sequential Limit Analysis. International Journal of Crashworthiness, 4(4), 379–394. https://doi.org/10.1533/cras.1999.0113 ( reposiTUm)

Silberschmidt, V. V., Rammerstorfer, F. G., Werner, E. A., Fischer, F. D., & Uggowitzer, P. J. (1999). On Material Immanent Ratchetting of Two-Phase Materials under Purely Thermal Loading. Archive of Applied Mechanics, 69(9–10), 727–750. https://doi.org/10.1007/s004190050253 ( reposiTUm)

Buryachenko, V. A., & Rammerstorfer, F. G. (1998). Thermoelastic Stress Fluctuations in Random-Structure Coated Particulate Composites. European Journal of Mechanics - A/Solids, 17(5), 763–788. https://doi.org/10.1016/s0997-7538(98)80004-1 ( reposiTUm)

Plankensteiner, A. F., Böhm, H. J., Rammerstorfer, F. G., & Pettermann, H. E. (1998). Multiscale Modeling of Highly Heterogeneous Particulate MMCs. Le Journal de Physique IV, 08(PR8), Pr8-308. https://doi.org/10.1051/jp4:1998837 ( reposiTUm)

Stiftinger, M. A., & Rammerstorfer, F. G. (1997). On Face Layer Wrinkling in Sandwich Shells - Theoretical and Experimental Investigations. Thin-Walled Structures, 29(1–4), 113–127. https://doi.org/10.1016/s0263-8231(97)00018-9 ( reposiTUm)

Chimani, C. C., Böhm, H. J., & Rammerstorfer, F. G. (1997). On Stress Singularities at Free Edges of Bimaterial Junctions - A Micromechanical Study. Scripta Materialia, 36(8), 943–947. https://doi.org/10.1016/s1359-6462(96)00461-7 ( reposiTUm)

Plankensteiner, A. F., Böhm, H. J., Rammerstorfer, F. G., Buryachenko, V. A., & Hackl, G. (1997). Modeling of Layer-Structured High Speed Steel. Acta Materialia, 45(5), 1875–1887. https://doi.org/10.1016/s1359-6454(96)00327-8 ( reposiTUm)

Seitzberger, M., Rammerstorfer, F. G., Degischer, H. P., & Gradinger, R. (1997). Crushing of Axially Compressed Steel Tubes Filled with Aluminium Foam. Acta Mechanica, 125(1–4), 93–105. https://doi.org/10.1007/bf01177301 ( reposiTUm)

Pettermann, H. E., Böhm, H. J., & Rammerstorfer, F. G. (1997). Some Direction Dependent Properties of Matrix-Inclusion Type Composites with Given Reinforcement Orientation Distributions. COMPOSITES PART B-ENGINEERING, 28(3), 253–265. https://doi.org/10.1016/s1359-8368(96)00055-8 ( reposiTUm)

Pettermann, H. E., Reiter, T. J., & Rammerstorfer, F. G. (1997). Computational Simulation of Internal Bone Remodeling. Archives of Computational Methods in Engineering, 4(4), 295–323. https://doi.org/10.1007/bf02737117 ( reposiTUm)

Plankensteiner, A. F., Böhm, H. J., Rammerstorfer, F. G., & Buryachenko, V. A. (1996). Hierarchical Modeling of the Mechanical Behavior of High Speed Steels as Layer-Structured Particulate MMCs. Le Journal de Physique IV, 06(C6), C6-402. https://doi.org/10.1051/jp4:1996639 ( reposiTUm)

Buryachenko, V. A., & Rammerstorfer, F. G. (1996). Thinly Coated Inclusion with Stress Free Strains in an Elastic Medium. Mechanics Research Communications, 23(5), 505–509. https://doi.org/10.1016/0093-6413(96)00050-x ( reposiTUm)

Nikitin, L. V., Fischer, F. D., Oberaigner, E. R., Rammerstorfer, F. G., Seitzberger, M., & Mogilevsky, R. I. (1996). On the Frictional Behaviour of Thermally Loaded Beams Resting on a Plane. International Journal of Mechanical Sciences, 38(11), 1219–1229. https://doi.org/10.1016/0020-7403(96)00009-4 ( reposiTUm)

Skrna-Jakl, I. C., Stiftinger, M. A., & Rammerstorfer, F. G. (1996). Numerical Investigations of an Imperfect Stringer-Stiffened Composite Wing Torsion Box - An Analysis Concept. COMPOSITES PART B-ENGINEERING, 27(1), 59–69. https://doi.org/10.1016/1359-8368(95)00007-0 ( reposiTUm)

Wang, X., & Rammerstorfer, F. G. (1996). Determination of Effective Breadth and Effective Width of Stiffened Plates by Finite Strip Analyses. Thin-Walled Structures, 26(4), 261–286. https://doi.org/10.1016/0263-8231(96)00028-6 ( reposiTUm)

Krach, W., Reiter, T. J., & Rammerstorfer, F. G. (1995). Computerunterstützte Vorhersage des Knochenumbaus am Beispiel von Knieendoprothesen. Biomedical Engineering / Biomedizinische Technik, 40(s2), 78–80. https://doi.org/10.1515/bmte.1995.40.s2.78 ( reposiTUm)

PETTERMANN, H. E., REITER, T. J., & RAMMERSTORFER, F. G. (1995). Ein Simulationsalgorithmus der natürlichen Anpassung des orthotropen Knochenmaterials. BIOMEDICAL ENGINEERING-BIOMEDIZINISCHE TECHNIK, 40(s2), 127–129. https://doi.org/10.1515/bmte.1995.40.s2.127 ( reposiTUm)

Stiftinger, M. A., Skrna-Jakl, I. C., & Rammerstorfer, F. G. (1995). Buckling and Postbuckling Investigations of Imperfect Curved Composite Shells, Part B: Computational Investigations. Thin-Walled Structures, 23(1–4), 339–350. https://doi.org/10.1016/0263-8231(95)00021-5 ( reposiTUm)

PLESCHBERGER, M., & RAMMERSTORFER, F. G. (1995). Spannungs- und Deformationsanalyse des zahnlosen menschlichen Unterkiefers mit Hilfe der Methode der finiten Elemente. BIOMEDICAL ENGINEERING-BIOMEDIZINISCHE TECHNIK, 40(s2), 124–126. https://doi.org/10.1515/bmte.1995.40.s2.124 ( reposiTUm)

PRAXMARER, N., RAMMERSTORFER, F. G., IRSIGLER, K., & KÄSTENBAUER, T. (1995). Eine Meßmethode zur Erfassung von Fußsteifigkeiten und ihre Anwendungen. BIOMEDICAL ENGINEERING-BIOMEDIZINISCHE TECHNIK, 40(s2), 90–92. https://doi.org/10.1515/bmte.1995.40.s2.90 ( reposiTUm)

Fischer, F. D., Kolednik, O., Shan, G. X., & Rammerstorfer, F. G. (1995). A Note on Calibration of Ductile Failure Damage Indicators. International Journal of Fracture, 73(4), 345–357. https://doi.org/10.1007/bf00027274 ( reposiTUm)

Weissenbek, E., Böhm, H. J., & Rammerstorfer, F. G. (1994). Micromechanical Investigations of Arrangement Effects in Particle Reinforced Metal Matrix Composites. Computational Materials Science, 3(2), 263–278. https://doi.org/10.1016/0927-0256(94)90141-4 ( reposiTUm)

Fischer, F. D., & Rammerstorfer, F. G. (1994). Mode-I Crack Projection Procedure Using the Strain Energy Density Criterion. Theoretical and Applied Fracture Mechanics, 20(1), 67–74. https://doi.org/10.1016/0167-8442(94)90030-2 ( reposiTUm)

Rammerstorfer, F. G., Starlinger, A., & Dorninger, K. (1994). Combined Micro- and Macromechanical Considerations of Layered Composite Shells. International Journal for Numerical Methods in Engineering, 37(15), 2609–2629. https://doi.org/10.1002/nme.1620371507 ( reposiTUm)

Böhm, H. J., Rammerstorfer, F. G., Fischer, F. D., & Siegmund, T. (1994). Microscale Arrangement Effects on the Thermomechanical Behavior of Advanced Two-Phase Composites. Journal of Engineering Materials and Technology, 116(3), 268–273. https://doi.org/10.1115/1.2904285 ( reposiTUm)

Skrna-Jakl, I., & Rammerstorfer, F. G. (1993). Numerical Investigations of Free Edge Effects in Integrally Stiffened Layered Composite Panels. Computers and Structures, 25(1–4), 129–137. https://doi.org/10.1016/0263-8223(93)90159-n ( reposiTUm)

Weissenbek, E., & Rammerstorfer, F. G. (1993). Influence of the Fiber Arrangement on the Mechanical and Thermo-Mechanical Behavior of Short-Fiber Reinforced MMCs. Acta Metallurgica et Materialia, 41(10), 2833–2843. https://doi.org/10.1016/0956-7151(93)90098-d ( reposiTUm)

Böhm, H. J., Rammerstorfer, F. G., & Weissenbek, E. (1993). Some Simple Models for Micromechanical Investigations of Fiber Arrangement Effects in MMCs. Computational Materials Science, 1(3), 177–194. https://doi.org/10.1016/0927-0256(93)90010-k ( reposiTUm)

Rammerstorfer, F. G., Fischer, F. D., Böhm, H. J., & Daves, W. (1992). Computational Micromechanics of Multiphase Materials. COMPUTERS & STRUCTURES, 44(1–2), 453–458. https://doi.org/10.1016/0045-7949(92)90267-4 ( reposiTUm)

Rammerstorfer, F. G., & Fischer, F. D. (1992). A Method for the Experimental Determination of Residual Stresses in Axisymmetric Composite Cylinders. JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 114(1), 90–96. https://doi.org/10.1115/1.2904148 ( reposiTUm)

Böhm, H. J., & Rammerstorfer, F. G. (1991). Micromechanical Investigation of the Processing and Loading of Fiber Reinforced Metal Matrix Composites. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 135, 185–188. https://doi.org/10.1016/0921-5093(91)90558-5 ( reposiTUm)

Svobodnik, A. J., Böhm, H. J., & Rammerstorfer, F. G. (1991). A 3/D Finite Element Approach for Metal Matrix Composites Based on Micromechanical Models. International Journal of Plasticity, 7(8), 781–802. https://doi.org/10.1016/0749-6419(91)90018-t ( reposiTUm)

Dorninger, K., & Rammerstorfer, F. G. (1990). A Layered Composite Shell Element for Elastic and Thermoelastic Stress and Stability Analysis at Large Deformations. International Journal for Numerical Methods in Engineering, 30(4), 833–858. https://doi.org/10.1002/nme.1620300417 ( reposiTUm)

Rammerstorfer, F. G., Scharf, K., & Fischer, F. D. (1990). Storage Tanks under Earthquake Loading. Applied Mechanics Reviews, 43(11), 261–282. https://doi.org/10.1115/1.3119154 ( reposiTUm)

Fischer, F. D., Rammerstorfer, F. G., & Bauer, F. J. (1990). Fatigue and Fracture of High-Alloyed Steel Specimens Subjected to Purely Thermal Cycling. Metallurgical Transactions A, 21(3), 935–948. https://doi.org/10.1007/bf02656578 ( reposiTUm)

Seeber, R., Fischer, F. D., & Rammerstorfer, F. G. (1990). Analysis of a Three-Dimensional Tank-Liquid-Soil Interaction Problem. JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 112(1), 28–33. https://doi.org/10.1115/1.2928582 ( reposiTUm)

Rammerstorfer, F. G., Dorninger, K., Böhm, H. J., & Zerobin, F. (1989). Analysis of Frictional Contact Problems in High Field Superconducting Magnets for Hadron Collider. Computers and Structures, 32(3–4), 787–795. https://doi.org/10.1016/0045-7949(89)90364-7 ( reposiTUm)

Fischer, F. D., Rammerstorfer, F. G., & Schreiner, W. (1989). The Extensible Uplifting Strip. Acta Mechanica, 80(3–4), 227–257. https://doi.org/10.1007/bf01176162 ( reposiTUm)

Toth, F., Kaltenbacher, M., & Rammerstorfer, F. G. (2015). Modelling of Air Chamber Supported Floating Platforms - Coupling Free Surface Flow, Compressible Air, and Flexible Structures. In B. A. Schrefler, E. Oñate, & M. Papadrakakis (Eds.), Coupled Problems in Science and Engineering (pp. 346–357). CIMNE. http://hdl.handle.net/20.500.12708/67197 ( reposiTUm)

Bartosik, M., Holec, D., Todt, M., Rammerstorfer, F. G., & Mayrhofer, P. H. (2014). Thermal Expansion and Elasticity of Metastable Cubic B1-AlN. In Book of abstracts. 41st International Conference on Metallurgical Coatings and Thin Films (ICMCTF), San Diego, CA, Non-EU. http://hdl.handle.net/20.500.12708/66996 ( reposiTUm)

Rammerstorfer, F. G., Toth, F., & Fischer, F. D. (2014). Loss of Stability of Structures under Global Tension - Modeling and Simulation of Some Typical Examples. In Abstracts of the 11th World Congress on Compuational Mechanics. 11th World Congress on Compuational Mechanics (WCCM XI), Barcelona, EU. CIMNE. http://hdl.handle.net/20.500.12708/67030 ( reposiTUm)

Todt, M., Rammerstorfer, F. G., & Hartmann, M. A. (2013). Continuum Shell Models for Closed Cage Carbon Nanoparticles. In W. Pietraszkiewicz & J. Górski (Eds.), Shell Structures: Theory and Applications (pp. 149–152). CRC Press/Balkema. http://hdl.handle.net/20.500.12708/66851 ( reposiTUm)

Toth, F., Rammerstorfer, F. G., Cordill, M. J., & Fischer, F. D. (2013). Modelling of Thin Film Buckling in Compound Specimens under Uniaxial Stretching. In W. Pietraszkiewicz & J. Górski (Eds.), Shell strucutres: Theory and Applications (Vol.3) (pp. 247–250). CRC Press/Balkema. http://hdl.handle.net/20.500.12708/66850 ( reposiTUm)

Aminbaghai, M., & Mang, H. A. (2012). Characteristics of the Solution of the Consistently Linearized Eigenproblem for Lateral Torsional Buckling. In J. Eberhardsteiner, H. J. Böhm, & F. G. Rammerstorfer (Eds.), CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) (p. 2). Vienna University of Technology. http://hdl.handle.net/20.500.12708/60835 ( reposiTUm)

Bader, T., Wikete, C., & de Borst, K. (2012). Elastic Properties of Hardwood at Different Length Scales Predicted by Means of a Micromechanical Model. In J. Eberhardsteiner, H. J. Böhm, & F. G. Rammerstorfer (Eds.), CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) (p. 2). Vienna University of Technology. http://hdl.handle.net/20.500.12708/60839 ( reposiTUm)

Dorn, M., de Borst, K., Bader, T., & Eberhardsteiner, J. (2012). Numerical Simulations of the Loading Process of Dowel-Type Timber Connections. In J. Eberhardsteiner, H. J. Böhm, & F. G. Rammerstorfer (Eds.), CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) (p. 2). Vienna University of Technology. http://hdl.handle.net/20.500.12708/60838 ( reposiTUm)

Lederer, W., Bader, T., Dorn, M., & Muszynski, L. (2012). Development of Integrated Imaging Methods for Investigation of Micromechanics of Dowel Connections for Engineered Wood Components. In J. Eberhardsteiner, H. J. Böhm, & F. G. Rammerstorfer (Eds.), CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) (p. 2). Vienna University of Technology. http://hdl.handle.net/20.500.12708/60837 ( reposiTUm)

Kober, C., Müller, C., Young, P., Fritsch, A., & Hellmich, C. (2012). A General Concept for Approximation of the Trajectories of Anisotropic Elasticity for Mammalian Bone, Demonstrated for the Human Mandible. In J. Eberhardsteiner, H. J. Böhm, & F. G. Rammerstorfer (Eds.), CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) (p. 7). Vienna University of Technology. http://hdl.handle.net/20.500.12708/60847 ( reposiTUm)

Henits, P., & Hellmich, C. (2012). Determination of Small Angle Scattering Patterns of Bone Tissues Based on Highly Ordered Collagen Scaffold Concept. In J. Eberhardsteiner, H. J. Böhm, & F. G. Rammerstorfer (Eds.), CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) (p. 2). Vienna University of Technology. http://hdl.handle.net/20.500.12708/60846 ( reposiTUm)

Blanchard, R., Dejaco, A., Bongaers, E., & Hellmich, C. (2012). Multiscale Micromechanics-Based Elasticity From Micro-CT Scans of Mouse femur. In J. Eberhardsteiner, H. J. Böhm, & F. G. Rammerstorfer (Eds.), CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) (p. 2). Vienna University of Technology. http://hdl.handle.net/20.500.12708/60841 ( reposiTUm)

Luczynski, K., Dejaco, A., Brynk, T., Jaroszewicz, J., Swieszkowski, W., & Hellmich, C. (2012). FE Model and Quasi-Static Unloading Tests Deliver Consistent Values of Young’s Modulus of Rapid-Prototyped Tissue Engineering Scaffold, Made of PLLA and TCP. In J. Eberhardsteiner, H. J. Böhm, & F. G. Rammerstorfer (Eds.), CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) (p. 2). Vienna University of Technology. http://hdl.handle.net/20.500.12708/60843 ( reposiTUm)

Dejaco, A., Komlev, V., Gurin, A. N., Jaroszewicz, J., Swieszkowski, W., & Hellmich, C. (2012). Micro CT-Based Multiscale Elasticity of Double-Porous (Pre-Cracked) Hydroxyapatite Granules for Regenerative Medicine. In J. Eberhardsteiner, H. J. Böhm, & F. G. Rammerstorfer (Eds.), CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) (p. 2). Vienna University of Technology. http://hdl.handle.net/20.500.12708/60844 ( reposiTUm)

Jia, X., & Mang, H. A. (2012). Influence of the Effects of Tension Stiffening and Tension Softening on the Failure Mode of a RC Hyperbolic Cooling Tower. In J. Eberhardsteiner, H. J. Böhm, & F. G. Rammerstorfer (Eds.), CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) (p. 2). Vienna University of Technology. http://hdl.handle.net/20.500.12708/60845 ( reposiTUm)

Scheiner, S., Pivonka, P., Smith, D., & Dunstan, C. (2012). Simulation of the Pharmaceutical Intervention of Postmenopausal Osteoporosis by Means of a Computational Approach. In J. Eberhardsteiner, H. J. Böhm, & F. G. Rammerstorfer (Eds.), CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) (p. 2). Vienna University of Technology. http://hdl.handle.net/20.500.12708/60850 ( reposiTUm)

Pichler, B., Dormieux, L., & Cariou, S. (2012). Damage of Partially Saturated Sedimentary Rock During Drying. In J. Eberhardsteiner, H. J. Böhm, & F. G. Rammerstorfer (Eds.), CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) (p. 2). Vienna University of Technology. http://hdl.handle.net/20.500.12708/60849 ( reposiTUm)

Pivonka, P., Buenzli, P. R., Scheiner, S., Thomas, C. D. L., & Clement, J. G. (2012). Numerical Simulation of the Spatio-Temporal Evolution of Cortical Porosity in Osteoporosis. In J. Eberhardsteiner, H. J. Böhm, & F. G. Rammerstorfer (Eds.), CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) (p. 2). Vienna University of Technology. http://hdl.handle.net/20.500.12708/60851 ( reposiTUm)

Pistrol, J., Falkner, F.-J., Adam, D., & Adam, C. (2012). Comparison of constitutive soil models for the simulation of dynamic roller compaction. In J. Eberhardsteiner, H. J. Böhm, & F. G. Rammerstorfer (Eds.), CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) (p. 15). ECCOMAS. http://hdl.handle.net/20.500.12708/60856 ( reposiTUm)

Murin, J., Aminbaghai, M., Hrabovsky, J., & Kutis, V. (2012). New FGM Beam Finite Element for Modal Analysis of the 2D Beam Structures. In J. Eberhardsteiner, H. J. Böhm, & F. G. Rammerstorfer (Eds.), CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) (p. 14). Vienna University of Technology. http://hdl.handle.net/20.500.12708/60836 ( reposiTUm)

Wagner, L., Bader, T., & de Borst, K. (2012). Mechanical Properties of Scots Pine (Pinus sylvestris L.) Cell Walls After Fungal Degradation: Multiscale Micromechanical Modeling and Experimental Validation. In J. Eberhardsteiner, H. J. Böhm, & F. G. Rammerstorfer (Eds.), CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) (p. 2). Vienna University of Technology. http://hdl.handle.net/20.500.12708/60840 ( reposiTUm)

Mang, H. A. (2012). Categorization of Buckling by Means of Spherical Geometry. In J. Eberhardsteiner, H. J. Böhm, & F. G. Rammerstorfer (Eds.), CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) (p. 2). Vienna University of Technology. http://hdl.handle.net/20.500.12708/60817 ( reposiTUm)

Dall´Ara, E., Luisier, B., Pretterklieber, M., Kainberger, F., Zysset, P. K., & Pahr, D. H. (2012). A Nonlinear Finite Element Model Validation Study for the Human Femur. In J. Eberhardsteiner, H. J. Böhm, & F. G. Rammerstorfer (Eds.), CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) (p. 2). TU Wien. http://hdl.handle.net/20.500.12708/66580 ( reposiTUm)

Pahr, D. H. (2012). Linear and Nonlinear μFE Models of Human Bones: Revisiting Methods, Simulation Issues, Selected Results. In J. Eberhardsteiner, H. J. Böhm, & F. G. Rammerstorfer (Eds.), CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) (p. 2). TU Wien. http://hdl.handle.net/20.500.12708/66582 ( reposiTUm)

Scheichl, B., & Guerrieri Paleotti, F. S. (2012). Elasto-Hydrodynamic Lubrication of Rough Contacts: On a Rigorous Generalisation of the Homogenisation Approach. In J. Eberhardsteiner, H. J. Böhm, & F. G. Rammerstorfer (Eds.), CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012), September 10-14, 2012, Vienna, Austria (pp. 4807-1-4807–4820). Vienna University of Technology. http://hdl.handle.net/20.500.12708/66547 ( reposiTUm)

Rammerstorfer, F. G., & Bilik, C. (2012). Increase of Buckling Resistance of Thin-Walled Structures Without Changing Mass, Material, Geometry or Boundary Conditions. In J. Eberhardsteiner, H. J. Böhm, & F. G. Rammerstorfer (Eds.), CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) (p. 2). TU Wien. http://hdl.handle.net/20.500.12708/66573 ( reposiTUm)

Skrna-Jakl, I. C., Pahr, D. H., & Rammerstorfer, F. G. (2012). Multiscale Computational Design of Large Scale Corrugated Core Sandwich Structures. In J. Eberhardsteiner, H. J. Böhm, & F. G. Rammerstorfer (Eds.), CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) (p. 2). TU Wien. http://hdl.handle.net/20.500.12708/66574 ( reposiTUm)

Pettermann, H. E., Gager, J., Rama Lista, E., & Flatscher, T. (2012). Elasto-Plasto-Damage Modeling of Laminated Composites. In J. Eberhardsteiner, H. J. Böhm, & F. G. Rammerstorfer (Eds.), CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) (p. 7). TU Wien. http://hdl.handle.net/20.500.12708/66579 ( reposiTUm)

Palau, T., Kuhn, A., Nogales, S., Böhm, H. J., & Rauh, A. (2012). A Neural Network Based Elasto-Plasticity Material Model. In J. Eberhardsteiner, H. J. Böhm, & F. G. Rammerstorfer (Eds.), CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) (p. 10). TU Wien. http://hdl.handle.net/20.500.12708/66578 ( reposiTUm)

Gager, J., & Pettermann, H. E. (2012). Multi-Layered Textile Composites - A Shell Element Based Homogenization Approach. In J. Eberhardsteiner, H. J. Böhm, & F. G. Rammerstorfer (Eds.), CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) (p. 12). TU Wien. http://hdl.handle.net/20.500.12708/66577 ( reposiTUm)

Todt, M., Hartmann, M. A., Paris, O., Fischer, F. D., & Rammerstorfer, F. G. (2012). Computational Treatment of the Stability of Multi-Layered Carbon Nanoparticles. In A. Ibrahimbegovic, S. Dolarevic, M. Hrasnica, M. Madzarevic, & M. Zlatar (Eds.), Proceedings of the 7th International Conference on Computational Mechanics of Spatial Structures (pp. 307–309). Faculty of Civil Engineering Sarajevo. http://hdl.handle.net/20.500.12708/66531 ( reposiTUm)

Hartmann, M. A., Todt, M., Holec, D., Mayrhofer, P. H., Paris, O., Fischer, F. D., & Rammerstorfer, F. G. (2012). Atomistic Modeling of the Mechanical Stability Behavior of Fullerenes. In J. Eberhardsteiner, H. J. Böhm, & F. G. Rammerstorfer (Eds.), CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) (p. 2). TU Wien. http://hdl.handle.net/20.500.12708/66584 ( reposiTUm)

Daum, B., Rammerstorfer, F. G., Fischer, F. D., & Dehm, G. (2012). Buckling Phenomena Associated with Micro-Pillar Testing. In J. Eberhardsteiner, H. J. Böhm, & F. G. Rammerstorfer (Eds.), CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) (p. 2). TU Wien. http://hdl.handle.net/20.500.12708/66581 ( reposiTUm)

Toth, F., Cordill, M. J., Fischer, F. D., & Rammerstorfer, F. G. (2012). Modeling and Simulation of an Experiment for Determining the Interface Strength Parameters of Thin Films on Compliant Substrates. In J. Eberhardsteiner, H. J. Böhm, & F. G. Rammerstorfer (Eds.), CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) (p. 2). TU Wien. http://hdl.handle.net/20.500.12708/66583 ( reposiTUm)

Auricchio, F., Balduzzi, G., & Lovadina, C. (2012). Mixed 3D beam models: Differential equation derivation and finite element solutions. In J. Eberhardsteiner, H. J. Böhm, & F. G. Rammerstorfer (Eds.), ECCOMAS  2012 : European Congress on  Computational Methods in  Applied Sciences and  Engineering : e-book Full Papers. http://hdl.handle.net/20.500.12708/353 ( reposiTUm)

Bilik, C., & Rammerstorfer, F. G. (2011). Computational Design Tools for Increase of Buckling Resistance of Lightweight Structures. In G. Zavarise & S. Reese (Eds.), Trends and Challenges in Computational Mechanics (pp. 139–140). Universita degli Studi di Padova. http://hdl.handle.net/20.500.12708/66468 ( reposiTUm)

Bilik, C., & Rammerstorfer, F. G. (2011). Instabilitäten während des Walzens von Profilen und im Einsatz von gewalzten Profilen. In B. Buchmayr (Ed.), XXX. Verformungskundliches Kolloquium (pp. 93–96). Montanuniversität Leoben. http://hdl.handle.net/20.500.12708/66296 ( reposiTUm)

Todt, M., Rammerstorfer, F. G., Hartmann, M. A., Paris, O., & Fischer, F. D. (2011). Shell-Models for Multi-Layer Carbon Nano-Particles. In H. Altenbach & V. A. Eremeyev (Eds.), Shell-like Structures (pp. 585–602). Springer-Verlag. https://doi.org/10.1007/978-3-642-21855-2_39 ( reposiTUm)

Todt, M., & Rammerstorfer, F. G. (2010). On the van der Waals Interactions Between Carbon Onion Layers. In H. Kaiser & R. Kirner (Eds.), Proceedings of the Junior Scientist Conference 2010 (pp. 215–216). http://hdl.handle.net/20.500.12708/66069 ( reposiTUm)

Bilik, C., Pahr, D. H., & Rammerstorfer, F. G. (2010). A Bead Laying Algorithm for Enhancing the Dynamic and Stability Behaviour of Thin Shell Structures. In 37th SolMech 2010 Book of Abstracts (pp. 302–303). Polish Academy of Science. http://hdl.handle.net/20.500.12708/66123 ( reposiTUm)

Bilik, C., Rammerstorfer, F. G., Figala, G., & Buchmayr, B. (2010). Investigation of the Stability and Dynamic Behaviour of Plates Subjected to Laser Treatment. In H. Kaiser & R. Kirner (Eds.), Proceedings of the Junior Scientist Conference 2010 (pp. 71–72). http://hdl.handle.net/20.500.12708/66066 ( reposiTUm)

Rammerstorfer, F. G. (2009). Status and Trends in Lightweight Materials and Structures. In I. Grubisić (Ed.), Visions of Engineering (pp. 21–32). University of Zagreb. http://hdl.handle.net/20.500.12708/65957 ( reposiTUm)

Bilik, C., Rammerstorfer, F. G., Daxner, T., Figala, G., & Buchmayr, B. (2009). Improving the Dynamic and Stability Behaviour of Plates by Laser Treatment. In I. Smojver & J. Soric (Eds.), Proceedings of the 6th ICCSM (p. 8). http://hdl.handle.net/20.500.12708/65950 ( reposiTUm)

Rammerstorfer, F. G., Fischer, F. D., Daxner, T., & Friedl, N. (2009). On Instabilities Appearing during the Production of Plates and Shells. In J. Ambrosio & M. P. T. Silva (Eds.), Proceedings of the 7th EUROMECH Solid Mechanics Conference (pp. 7–12). Associção Portuguesa de Mecânica Teórica, Aplicada e Computacional. http://hdl.handle.net/20.500.12708/65940 ( reposiTUm)

Bitsche, R. D., Khalil, Z., Noster, U., & Rammerstorfer, F. G. (2008). Simulation von Stahl-Leichtmetall Verbundguss-Strukturen - Herstellung und Mechanisches Verhalten. In U. Noster, F. Riemelmoser, & P. J. Uggowitzer (Eds.), 5. Ranshofener Leichtmetalltage 2008 (pp. 87–98). http://hdl.handle.net/20.500.12708/65737 ( reposiTUm)

Bitsche, R. D., & Rammerstorfer, F. G. (2008). Stress Singularities at Interfaces in Structures - Design Charts. In Y.-B. Yang, L.-J. Leu, C.-S. Chen, & P.-C. Su (Eds.), Proceedings of the 11th East Asia-Pacific Conference on Structural Engineering and Construction (p. 6). National Taiwan University. http://hdl.handle.net/20.500.12708/65791 ( reposiTUm)

Rammerstorfer, F. G., Bitsche, R. D., Daxner, T., Fischer, F. D., Flatscher, T., & Pahr, D. H. (2008). Computational Stability Analysis - Bridging the Length Scales. In Y.-B. Yang (Ed.), Proceedings of the Taiwan-Austria Joint Workshop on Computational Mechanics of Materials and Structures (pp. 28–30). National Taiwan University. http://hdl.handle.net/20.500.12708/65793 ( reposiTUm)

Pahr, D. H., & Rammerstorfer, F. G. (2007). Analytical and Computational Models for Investigations of Local Buckling in Honeycomb Sandwiches. In T. Chandra, K. Tsuzaki, C. Ravindran, & M. Militzer (Eds.), Thermec 2006, Materials Science Forum Vols. 539-543 (pp. 2467–2472). Trans Tech Publications Ltd. http://hdl.handle.net/20.500.12708/65443 ( reposiTUm)

Daxner, T., Flatscher, T., & Rammerstorfer, F. G. (2007). Optimum Design of Corrugated Board under Buckling Constraints. In B. M. Kwak (Ed.), Proceedings of the 7th World Congress on Structural and Multidisciplinary Optimization (p. 10). BMD Co., Seoul. http://hdl.handle.net/20.500.12708/65549 ( reposiTUm)

Bitsche, R. D., Noster, U., Peterlechner, C., & Rammerstorfer, F. G. (2006). Simulation von kraft- und formschlüssigen Hybridguss-Verbindungen als Designgrundlage. In H. Kaufmann, P. J. Uggowitzer, & U. Noster (Eds.), 4. Ranshofener Leichtmetalltage 2006 - Vom Werkstoff zum Bauteilsystem (pp. 275–288). http://hdl.handle.net/20.500.12708/65414 ( reposiTUm)

Hößl, B., Böhm, H. J., Rammerstorfer, F. G., & Barth, F. G. (2005). Mechanoreception in the Exoskeleton of Arachnids: Engineering Meets Biology. In M. Hamza (Ed.), Proceedings of the Third IASTED International Conference on Biomechanics (p. 5). IASTED Acta Press. http://hdl.handle.net/20.500.12708/65242 ( reposiTUm)

Rammerstorfer, F. G., Daxner, T., Pahr, D. H., & Vonach, W. (2005). Shell and Truss Structures on the Micro- and Meso-Level of Lightweight Materials. In E. Ramm, W. A. Wall, K.-U. Bletzinger, & M. Bischoff (Eds.), Extended Abstracts of the 5th International Conference on Computation of Shell and Spatial Structures (p. 4). http://hdl.handle.net/20.500.12708/65220 ( reposiTUm)

Friedl, N., Rammerstorfer, F. G., Fischer, F. D., & Noé, A. (2005). Waviness of Thin Strips - Instabilities during Forming and Heat Treatment Processes. In E. Ramm, W. A. Wall, K.-U. Bletzinger, & M. Bischoff (Eds.), Extended Abstracts of the 5th International Conference on Computation of Shell and Spatial Structures (p. 4). http://hdl.handle.net/20.500.12708/65221 ( reposiTUm)

Schwarz, K., & Blaha, P. (2002). Quantum mechanical computations at the atomic scale for material sciences. In H. A. Mang, F. G. Rammerstorfer, & J. Eberhardsteiner (Eds.), Fifth world congress on computational mechanics. Proceedings. http://hdl.handle.net/20.500.12708/45056 ( reposiTUm)

Pahr, D., Daxner, T., Rammerstorfer, F. G., & Böhm, H. J. (2001). On Micro/Meso/Macro Modeling of Composite Lightweight Materials and Structures. In S. Valliappan & N. Khalili (Eds.), Computational Mechanics–New Frontiers for the New Millennium (pp. 753–762). Elsevier. https://doi.org/10.1016/b978-0-08-043981-5.50114-0 ( reposiTUm)

Böhm, H. J., Chimani, C. M., Pettermann, H. E., Plankensteiner, A. F., & Rammerstorfer, F. G. (1999). Multiscale Treatment of Inhomogeneous Materials by Finite Elements. In H. A. Mang & F. G. Rammerstorfer (Eds.), IUTAM Symposium on Discretization Methods in Structural Mechanics (pp. 257–264). Kluwer Academic Publishers. https://doi.org/10.1007/978-94-011-4589-3_30 ( reposiTUm)

Stewart, R. B., Marketz, F., Lohbeck, W. C. M., Fischer, F. D., Daves, W., Rammerstorfer, F. G., & Böhm, H. J. (1999). Expandable Wellbore Tubulars. In All Days. Society of Petroleum Engineers. https://doi.org/10.2118/60766-ms ( reposiTUm)

Buryachenko, V., Böhm, H., & Rammerstorfer, F. (1996). Modeling of the Overall Elastoplastic Behavior of Multiphase Materials by the Effective Field Method. In A. Pineau & A. Zaoui (Eds.), IUTAM Symposium on Micromechanics of Plasticity and Damage of Multiphase Materials (pp. 35–42). Kluwer Academic Publishers. https://doi.org/10.1007/978-94-009-1756-9_5 ( reposiTUm)

Todt, M., Hartmann, M. A., & Rammerstorfer, F. (2023). Continuum Mechanics Applied for Studying Instabilities in Nanoparticles. In H. Altenbach, H. Irschik, & A. V. Porubov (Eds.), Progress in Continuum Mechanics (Vol. 196, pp. 429–456). Springer. https://doi.org/10.1007/978-3-031-43736-6_25 ( reposiTUm)

Skrna-Jakl, I. C., & Rammerstorfer, F. G. (2019). Macromechanics of Laminates. In H. Altenbach & A. Öchsner (Eds.), Encyclopedia of Continuum Mechanics (pp. 1–10). Springer. https://doi.org/10.1007/978-3-662-53605-6_9-1 ( reposiTUm)

Rammerstorfer, F. G., & Skrna-Jakl, I. C. (2019). Methods of Plasticity Theory in Lightweight Design. In H. Altenbach & A. Öchsner (Eds.), Encyclopedia of Continuum Mechanics (p. 11). Springer. http://hdl.handle.net/20.500.12708/29925 ( reposiTUm)

Rammerstorfer, F. G., & Skrna-Jakl, I. C. (2018). Shear Web Theory. In H. Altenbach & A. Öchsner (Eds.), Encyclopedia of Continuum Mechanics (pp. 1–7). Springer. https://doi.org/10.1007/978-3-662-53605-6_3-1 ( reposiTUm)

Todt, M., & Rammerstorfer, F. G. (2018). Analytical Stability Considerations in Lightweight Design. In H. Altenbach & A. Öchsner (Eds.), Encyclopedia of Continuum Mechanics (pp. 1–12). Springer. https://doi.org/10.1007/978-3-662-53605-6_7-1 ( reposiTUm)

Rammerstorfer, F. G., & Skrna-Jakl, I. C. (2018). Fracture Mechanics in Lightweight Design. In H. Altenbach & A. Öchsner (Eds.), Encyclopedia of Continuum Mechanics (pp. 1–7). Springer. https://doi.org/10.1007/978-3-662-53605-6_5-1 ( reposiTUm)

Reichl, F., Karg, P., Huemer, S., Heimerl, P., & Horvat, M. (2016). Technologietransfer - Verträge und Patente - Spin-Offs - EU-Forschung: Das Außeninstitut und was daraus geworden ist. In F. G. Rammerstorfer (Ed.), Von der Technischen Hochschule zur Forschungsuniversität (pp. 107–114). Böhlau Verlag. http://hdl.handle.net/20.500.12708/29215 ( reposiTUm)

Hartmann, M. A., Todt, M., & Rammerstorfer, F. G. (2016). Atomistic and continuum modelling of graphene and graphene-derived carbon nanostructures. In O. Paris (Ed.), Structure and Multiscale Mechanics of Carbon Nanomaterials (pp. 135–179). Springer-Verlag. https://doi.org/10.1007/978-3-7091-1887-0_6 ( reposiTUm)

Flatscher, T., Daxner, T., Pahr, D. H., & Rammerstorfer, F. G. (2011). Optimization of Corrugated Paperboard under Local and Global Buckling Constraints. In R. de Borst & E. Ramm (Eds.), Multiscale Methods in Computational Mechanics (pp. 329–346). Springer-Verlag. http://hdl.handle.net/20.500.12708/26921 ( reposiTUm)

Rammerstorfer, F. G., & Daxner, T. (2009). Berechnungs- und Design-Konzepte für den Leichtbau. In H.-P. Degischer & S. Lüftl (Eds.), Leichtbau (pp. 14–49). Wiley-VCH. http://hdl.handle.net/20.500.12708/26515 ( reposiTUm)

Daxner, T., Pahr, D. H., & Rammerstorfer, F. G. (2008). Micro- and Meso-Instabilities in Structured Materials and Sandwich Structures. In B. G. Falzon & M. H. Aliabadi (Eds.), Buckling and Postbuckling Structures: Experimental, Analytical and Numerical Studies (pp. 453–495). Imperial College Press. http://hdl.handle.net/20.500.12708/26092 ( reposiTUm)

Rammerstorfer, F. G., Hößl, B., Dechant, H. E., Böhm, H. J., & Barth, F. G. (2008). Computational Biomechanics of Sensory Organs in Spiders. In B. H. V. Topping & M. Papadrakakis (Eds.), Trends in Engineering Computational Technology (pp. 321–334). Saxe-Coburg Publications. http://hdl.handle.net/20.500.12708/26099 ( reposiTUm)

Rammerstorfer, F. G., Fischer, F. D., Friedl, N., & Daxner, T. (2006). Instabilities Resulting from the Production Process of Plates and Shells. In B. H. V. Topping, G. Montero, & R. Montenegro (Eds.), Innovation in Computational Strcutures Technology (pp. 205–223). Saxe-Coburg Publications. http://hdl.handle.net/20.500.12708/26036 ( reposiTUm)

Rammerstorfer, F. G., Skrna-Jakl, I. C., & Todt, M. (Eds.). (2020). Lightweight Structures. Springer. https://doi.org/10.1007/978-3-662-55771-6 ( reposiTUm)

Eberhardsteiner, J., Böhm, H. J., & Rammerstorfer, F. (Eds.). (2012). Book of Abstracts of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012). Vienna University of Technology. http://hdl.handle.net/20.500.12708/23558 ( reposiTUm)

Eberhardsteiner, J., Böhm, H. J., & Rammerstorfer, F. G. (Eds.). (2012). CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012). Vienna University of Technology. http://hdl.handle.net/20.500.12708/23509 ( reposiTUm)

Rammerstorfer, F. (2022, October 7). WRINKLING OF STRETCH-TWISTED STRIPS (consideration of mode transitions) [Conference Presentation]. Colloquium to celebrate  Bernhard A. Schrefler’s 80th birthday, CISM - Udine, Italy. ( reposiTUm)

Rammerstorfer, F. G. (2019). Some oddities in plate and shell buckling. 4th Polish Congress of Mechanics (PCM-CMM 2019), Krakow, Poland. http://hdl.handle.net/20.500.12708/95147 ( reposiTUm)

Rammerstorfer, F. G. (2018). Computational treatment of instabilities of thin-walled structures under tension. Thirteenth International Conference on Computational Structures Technology, Barcelona, Spain. http://hdl.handle.net/20.500.12708/94913 ( reposiTUm)

Todt, M., Schwab, M., Humer, M., Rammerstorfer, F. G., & Pettermann, H. E. (2017). Accounting for Transverse Shear in Shell-Based Ply-Level Models of Layered Composites. 88th Annual Meeting of GAMM, Weimar, Germany. http://hdl.handle.net/20.500.12708/94616 ( reposiTUm)

Todt, M., Schwab, M., Humer, M., Rammerstorfer, F. G., & Pettermann, H. E. (2017). Shell-Based Ply-Level Models of Layered Composites. 88th Annual Meeting of GAMM, Weimar, Germany. http://hdl.handle.net/20.500.12708/94617 ( reposiTUm)

Todt, M., Bartosik, M., Böhm, H. J., Rammerstorfer, F. G., & Mayrhofer, P. H. (2016). Influence of Undulations on the Thermo-Mechanical Behavior of Thin Film-Substrate Systems. Joint Annual Meeting of DMV and GAMM 2016, Braunschweig, Germany. http://hdl.handle.net/20.500.12708/94359 ( reposiTUm)

Rammerstorfer, F. G., & Toth, F. (2016). Cracking and Buckling of Thin Metallic Films on Polymeric Substrate Under Global Tension - A Computational Approach. 2016 EMI International Conference, Metz, France. http://hdl.handle.net/20.500.12708/94440 ( reposiTUm)

Toth, F., Kirchlechner, C., Fischer, F. D., Dehm, G., & Rammerstorfer, F. G. (2016). Influence of imperfections and friction on the deformation shape of #gt compressed bi-crystal crystal micropillars. 2016 EMI International Conference, Metz, France. http://hdl.handle.net/20.500.12708/94481 ( reposiTUm)

Hartmann, M. A., Todt, M., & Rammerstorfer, F. G. (2015). Effective Mechanical Properties of Graphene Obtained by Computational Mechanical Tests. Verhandlungen der Deutschen Physikalischen Gesellschaft 2015, Berlin, Germany. http://hdl.handle.net/20.500.12708/94065 ( reposiTUm)

Rammerstorfer, F. G., & Toth, F. (2015). Simulating the Evolution of Crack Patterns and Buckles in Thin Metallic Films. 8th International Congress of the Croatian Society of Mechanics, Rijeka, Croatia. http://hdl.handle.net/20.500.12708/94146 ( reposiTUm)

Rammerstorfer, F. G. (2015). Instabilities at the Nano and Micro Levels as Source of Macroscopic Material Nonlinearities. Kolloquium über Werkstoffmodellierung, Stuttgart, Germany. http://hdl.handle.net/20.500.12708/94107 ( reposiTUm)

Rammerstorfer, F. G. (2014). Leichtbau heute. Seminar des Christian Doppler Labors für Strukturfestigkeitskontrolle von Leichtbaukonstrukt ionen, Linz, Austria. http://hdl.handle.net/20.500.12708/94057 ( reposiTUm)

Toth, F., Wiesinger, A., Cordill, M. J., Marx, V. M., & Rammerstorfer, F. G. (2014). Computational Simulation of Cracking and Buckling of Thin Metallic Films on Polymer Substrate under Tensile Loading. Flex Workshop “Mechanical Issues for Flexible Electronics,” Leoben, Austria. http://hdl.handle.net/20.500.12708/93825 ( reposiTUm)

Skrna-Jakl, I. C., Pahr, D. H., Karner, K.-H., & Rammerstorfer, F. G. (2014). Homogenization Technique for the Efficient Modeling of Large Scale Corrugated Core Sandwich Structures. 4th International Conference on Applied Physics and Mathematics (ICAPM 2104), Singapore, Non-EU. http://hdl.handle.net/20.500.12708/93820 ( reposiTUm)

Todt, M., Toth, F., Hartmann, M. A., Holec, D., Cordill, M. J., Fischer, F. D., & Rammerstorfer, F. G. (2014). Computational Simulation of Instability Phenomena in Nanoparticles and Nanofilms. 12th International Conference on Computational Structures Technology (CST2014) and 9th International Conference on Engineering Computational Technology (ECT2014), Neapel, Italy. http://hdl.handle.net/20.500.12708/93888 ( reposiTUm)

Toth, F., & Rammerstorfer, F. G. (2013). FSI-Induced Instabilities of Air Chambers in Floating Solar Energy Platforms - Modelling and Experiment. Vth International Conference on Coupled Problems in Science and Engineering, Santa Eulària, Ibiza, EU. http://hdl.handle.net/20.500.12708/93608 ( reposiTUm)

Daum, B., & Rammerstorfer, F. G. (2013). Buckling of Lamellae in an Elastic Plastic Matrix. 4th Canadian Conference on Nonlinear Solid Mechanics (CanCNSM 2013), Montréal, Non-EU. http://hdl.handle.net/20.500.12708/93607 ( reposiTUm)

Skrna-Jakl, I. C., Pahr, D. H., & Rammerstorfer, F. G. (2013). Computational Design of Large Scale Corrugated Core Sandwich Structures Employing a Multiscale Analysis Concept. Seminar des Instituts für Mechanik, TU Berlin, Berlin, EU. http://hdl.handle.net/20.500.12708/93621 ( reposiTUm)

Toth, F., & Rammerstorfer, F. G. (2013). Dynamic Modelling of an Offshore Platform Supported by Flexible Air Cushions. Computational Methods in Marine Engineering MARINE 2013, Hamburg, EU. http://hdl.handle.net/20.500.12708/93594 ( reposiTUm)

Todt, M., Holec, D., & Rammerstorfer, F. G. (2013). Continuum Mechanical Modeling of Interlayer Defects in Multi-Layered Carbon Nanostructures. 84th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM), Novi Sad, Non-EU. http://hdl.handle.net/20.500.12708/93581 ( reposiTUm)

Todt, M., Hartmann, M. A., Holec, D., & Rammerstorfer, F. G. (2012). Accessing the Mechanical Behavior of Carbon Fullerenes by Continuum Shell Models. 10th World Congress on Computational Mechanics (WCCM 2012), São Paulo, Non-EU. http://hdl.handle.net/20.500.12708/93379 ( reposiTUm)

Hartmann, M. A., Todt, M., Holec, D., Mayrhofer, P. H., Paris, O., Fischer, F. D., & Rammerstorfer, F. G. (2012). Mechanical Properties of Carbon Nanostructures Investigated by Monte Carlo Simulations. 62. Jahrestagung der Österreichischen Physikalischen Gesellschaft, Graz, Austria. http://hdl.handle.net/20.500.12708/93923 ( reposiTUm)

Hartmann, M. A., Todt, M., Holec, D., Mayrhofer, P. H., Paris, O., Fischer, F. D., & Rammerstorfer, F. G. (2012). Mechanical Stability Behavior of Fullerenes. 76. Jahrestagung der DPG und DPG-Frühjahrstagung, Berlin, Deutschland, EU. http://hdl.handle.net/20.500.12708/93922 ( reposiTUm)

Hartmann, M. A., Todt, M., Rammerstorfer, F. G., Holec, D., Mayrhofer, P. H., Fischer, F. D., & Paris, O. (2012). Simulation-Based Design of Nanocomposite Metamaterials. 10th World Congress on Computational Mechanics (WCCM 2012), São Paulo, Non-EU. http://hdl.handle.net/20.500.12708/93380 ( reposiTUm)

Rammerstorfer, F. G., & Bilik, C. (2011). Verbesserung des Stabilitätsverhaltens von dünnwandingen Strukturen. Workshop des COMET-K2 Kompetenzzentrums MPPE, Leoben, Austria. http://hdl.handle.net/20.500.12708/93184 ( reposiTUm)

Figala, G., Buchmayr, B., Bilik, C., & Rammerstorfer, F. G. (2011). Verbesserung der statischen und dynamischen Eigenschaften von Platten durch lokale Laserbestrahlung. Schmiedewerkzeuge: Technologien - Entwicklungen - Analysen, Salzburg, Austria. http://hdl.handle.net/20.500.12708/93222 ( reposiTUm)

Hartmann, M. A., Holec, D., Todt, M., Fischer, F. D., Rammerstorfer, F. G., Mayrhofer, P. H., & Paris, O. (2011). A Multi-Scale Approach for Studying Carbon Nanostructures. Joint Annual Meeting of the Swiss Physical Society and the Austrian Physical Society 2011, Lausanne, Non-EU. http://hdl.handle.net/20.500.12708/93313 ( reposiTUm)

Todt, M., Rammerstorfer, F. G., Paris, O., & Fischer, F. D. (2011). Mechanical Behavior of Carbon Crystallites Forming Carbon Fibers. ICCE 19, 19th Annual International Conference on Composites/Nano Engineering, Shanghai, Non-EU. http://hdl.handle.net/20.500.12708/93204 ( reposiTUm)

Todt, M., Rammerstorfer, F. G., Bitsche, R. D., Fischer, F. D., Mayrhofer, P. H., Hartmann, M. A., Holec, D., & Paris, O. (2010). On the Stability of Carbon Onions. GAMM 2010 - 81st Annual Meeting of the International Association of Applied Mathematics and Mechanics, Karlsruhe, EU. http://hdl.handle.net/20.500.12708/92972 ( reposiTUm)

Holec, D., Hartmann, M. A., Rammerstorfer, F. G., Paris, O., Fischer, F. D., & Mayrhofer, P. H. (2010). Surface Energy of Carbon Fullerenes and Nanotubes. 37th International Conference on Metallurgical Coatings and Thin Films, San Diego, CA, Non-EU. http://hdl.handle.net/20.500.12708/92984 ( reposiTUm)

Rammerstorfer, F. G., Daxner, T., Fischer, F. D., Flatscher, T., Pahr, D. H., & Todt, M. (2010). Instabilities in Materials at the Nano, Micro and Meso Scale. ECCM2010, European Conference on Computational Mechanics 2010, Paris, EU. http://hdl.handle.net/20.500.12708/92985 ( reposiTUm)

Flatscher, T., Daxner, T., & Rammerstorfer, F. G. (2009). Optimization of Corrugated Paper under Local and Global Buckling Constraints. Colloquium on Multiscale Methods in Computational Mechanics (MMCM 2009), Rolduc, EU. http://hdl.handle.net/20.500.12708/92748 ( reposiTUm)

Rammerstorfer, F. G. (2009). Leichtbauprinzipien. ASMET Seminar Leichtbau, Wien, Austria. http://hdl.handle.net/20.500.12708/92837 ( reposiTUm)

Rammerstorfer, F. G., Fischer, F. D., Daxner, T., Bilik, C., & Friedl, N. (2009). On Instabilities Appearing during the Production of Plates and Shells. 7th EUROMECH Solid Mechanics Conference - ESMC 2009, Lissabon, EU. http://hdl.handle.net/20.500.12708/92788 ( reposiTUm)

Rammerstorfer, F. G., Daxner, T., & Pahr, D. H. (2008). Zelluläre Strukturen in Natur und Technik. 5. Ranshofener Leichtmetalltage 2008, Geinberg, Austria. http://hdl.handle.net/20.500.12708/92536 ( reposiTUm)

Rammerstorfer, F. G., Hößl, B., Dechant, H. E., Böhm, H. J., & Barth, F. G. (2008). Computational Biomechanics of Sensory Organs in Spiders. Sixth International Conference on Engineering Computational Technology (ECT2008), Athen, EU. http://hdl.handle.net/20.500.12708/92574 ( reposiTUm)

Barth, F. G., Böhm, H. J., Hößl, B., & Rammerstorfer, F. G. (2008). Computational Treatment of Slit Sensilla of Spiders - Biomechanics in Neurobiology. ECCOMAS Multidisciplinary Jubilee Symposium, Wien, Austria. http://hdl.handle.net/20.500.12708/92510 ( reposiTUm)

Bitsche, R. D., & Rammerstorfer, F. G. (2007). Thermischer Kontaktwiderstand an Interfaces von Hybridguss-Verbindungen. Meeting des Projekts “Austrian Light Weight Structures,” Braunau, Austria. http://hdl.handle.net/20.500.12708/92340 ( reposiTUm)

Daxner, T., & Rammerstorfer, F. G. (2007). Leichtbauprinzipien - Zielgrößen, Modellbildung, Berechnungsmethoden, Optimierung. ASMET Seminar Leichtbau, Wien, Austria. http://hdl.handle.net/20.500.12708/92342 ( reposiTUm)

Daxner, T., & Rammerstorfer, F. G. (2007). Leichtbau-Konstruktionsprinzipien. ASMET Forum für Metallurgie und Werkstofftechnik, Montanuniversität Leoben, Austria. http://hdl.handle.net/20.500.12708/92348 ( reposiTUm)

Daxner, T., Flatscher, T., & Rammerstorfer, F. G. (2007). Weight Reduction of Corrugated Board under Preservation of Buckling Strength. 9th US National Congress on Computational Mechanics, San Francisco, CA, Non-EU. http://hdl.handle.net/20.500.12708/92360 ( reposiTUm)

Skrna-Jakl, I. C., & Rammerstorfer, F. G. (2007). Modellierung und numerische Simulation von Leichtbaumaterialien und Leichtbaustrukturen. euroLITE Internationale Fachmesse für Leichtbaukonstruktionen, Salzburg, Austria. http://hdl.handle.net/20.500.12708/92355 ( reposiTUm)

Barth, F. G., Hößl, B., Schaber, C. F., Gorb, S., Böhm, H. J., & Rammerstorfer, F. G. (2007). Arthropod Mechanoreceptors: From Biology to Engineering. Annual Main Meeting of the Society for Experimental Biology, Glasgow, EU. http://hdl.handle.net/20.500.12708/92415 ( reposiTUm)

Pahr, D. H., & Rammerstorfer, F. G. (2006). Analytical and Computational Models for Investigations of Local Buckling in Honeycomb Sandwiches. THERMEC 2006 - International Conference on Processing and Manufacturing of Advanced Materials, Vancouver, BC, Non-EU. http://hdl.handle.net/20.500.12708/92183 ( reposiTUm)

Skrna-Jakl, I. C., Karner, K.-H., Pahr, D. H., & Rammerstorfer, F. G. (2006). Numerical and Experimental Investigations of the Stiffness and Strength Behavior of Corrugated Core Sandwich Panels. 7th World Congress on Computational Mechanics (WCCM-7), Los Angeles, CA, Non-EU. http://hdl.handle.net/20.500.12708/92180 ( reposiTUm)

Hößl, B., Böhm, H. J., Rammerstorfer, F. G., & Barth, F. G. (2006). Arthropod Strain Detectors: I. Modeling the Mechanics of Arachnid Lyriform Organs by Finite Element Models. Fifth Forum of European Neuroscience, Wien, Austria. http://hdl.handle.net/20.500.12708/92177 ( reposiTUm)

Rammerstorfer, F. G., Daxner, T., Pahr, D. H., & Vonach, W. K. (2006). Hierarchical Modelling of Composite Materials and Material Compounds for Aerospace Applications. Special Lecture at the Department of Aeronautics and Astronautics of the University of Tokyo, Tokyo, Non-EU. http://hdl.handle.net/20.500.12708/92225 ( reposiTUm)

Böhm, H. J., Hößl, B., Rammerstorfer, F. G., & Barth, F. G. (2006). Finite Element Modelling of Slit Sensilla of Arachnids. NCBES Seminar, Galway, Irland, EU. http://hdl.handle.net/20.500.12708/92277 ( reposiTUm)

Rammerstorfer, F. G., Pahr, D. H., & Daxner, T. (2006). Micro- and Meso-Instabilities in Structured Composite Materials and Material Compounds. 19th International Workshop “Research in Mechanics of Composites,” Bad Herrenalb, EU. http://hdl.handle.net/20.500.12708/92242 ( reposiTUm)

Rammerstorfer, F. G., Fischer, F. D., Friedl, N., & Daxner, T. (2006). Instabilities Resulting from the Production Process of Plates and Shells. Eighth International Conference on Computational Structures Technology, Las Palmas de Gran Canaria, EU. http://hdl.handle.net/20.500.12708/92199 ( reposiTUm)

Hößl, B., Böhm, H. J., Rammerstorfer, F. G., Müllan, R., & Barth, F. G. (2005). Engineering Meets Biology: Computer Based Modeling of Spider Strain Detectors. 9th Meeting of the Austrian Neuroscience Association, Obergurgl, Austria. http://hdl.handle.net/20.500.12708/92052 ( reposiTUm)

Daxner, T., Luxner, M., & Rammerstorfer, F. G. (2005). Pre-Tensioned Belts Overhanging Elastic Rollers. 76th  Annual Scientific Conference GAMM 2005, Luxembourg, EU. http://hdl.handle.net/20.500.12708/92040 ( reposiTUm)

Fischer, F. D., Rammerstorfer, F. G., & Daxner, T. (2005). An Analytical Approach to Flaring. XXIV. Verformungskundliches Kolloquium, Planneralm, Österreich, Austria. http://hdl.handle.net/20.500.12708/92023 ( reposiTUm)

Barth, F. G., Hößl, B., Böhm, H. J., & Rammerstorfer, F. G. (2004). From technical biology to natural technology? The remarkable refinement of spider mechano-sensors. Insect Sensors and Robotics, Brisbane, Austria. http://hdl.handle.net/20.500.12708/91903 ( reposiTUm)

Pahr, D. H., Marte, C., Rammerstorfer, F. G., & Böhm, H. J. (2004). Hierarchical Modelling of Perforated Woven Fabric Laminates. ECCOMAS 2004 (4th European Congress on Computational Methods in Applied Sciences and Engineering), Jyväskylä, Austria. http://hdl.handle.net/20.500.12708/91879 ( reposiTUm)

Pettermann, H. E., Schuecker, C., Pahr, D. H., & Rammerstorfer, F. G. (2004). Modeling and Simulation of Aircraft Structures - Stiffness, Damage, and Failure Prediction for Laminated Composites. 4th FENet Annual Industry Meeting, Lissabon, Austria. http://hdl.handle.net/20.500.12708/91906 ( reposiTUm)

Rammerstorfer, F. G., Pahr, D. H., Daxner, T., & Friedl, N. (2004). Buckling in Thin Walled Macro and Meso Structures of Lightweight Materials and Material Compounds. WCCM VI, Beijing, Austria. http://hdl.handle.net/20.500.12708/91880 ( reposiTUm)

Rammerstorfer, F. G. (2004). FE-Analyse des Erzherzogs Carl von Österreich. FE im Schnee, Hirschegg, Austria. http://hdl.handle.net/20.500.12708/91719 ( reposiTUm)

Rammerstorfer, F. G. (2004). Was ist Flaring? XXIII. Verformungskundliches Kolloquium, Planneralm, Austria. http://hdl.handle.net/20.500.12708/91808 ( reposiTUm)

Daxner, T., Rammerstorfer, F. G., & Fischer, F. D. (2004). Simulation von Instabilitäten während des Kegelaufweitens von Rohren. FE im Schnee, Hirschegg, Austria. http://hdl.handle.net/20.500.12708/91709 ( reposiTUm)

Daxner, T., Rammerstorfer, F. G., & Fischer, F. D. (2004). Simulation of Material and Structural Instability Phenomena During the Flaring Process of Cylindrical Shells. Materials Processing and Design: Modeling, Simulation and Applications NUMIFORM 2004, Columbus, OH, Austria. http://hdl.handle.net/20.500.12708/91861 ( reposiTUm)

Rammerstorfer, F. G., & Vonach, W. K. (2003). Face Layer Wrinkling in Sandwich-Shells of General Configuration. 2nd MIT Conference on Computational Fluid and Solid Mechanics, Cambridge, MA, USA, Austria. http://hdl.handle.net/20.500.12708/91622 ( reposiTUm)

Pahr, D. H., & Rammerstorfer, F. G. (2003). Experimentelle und numerische Untersuchungen von perforierten Laminaten. 14. DGM Symposium Verbundwerkstoffe und Werkstoffverbunde, Wien, Austria. http://hdl.handle.net/20.500.12708/91628 ( reposiTUm)

Rammerstorfer, F. G. (2003). Multiscale Modelling of Cellular Structures. Met Foam 2003, Berlin, Austria. http://hdl.handle.net/20.500.12708/91624 ( reposiTUm)

Rammerstorfer, F. G. (2003). Instabilitäten beim Erzeugen dünner Bänder. Seminar des Instituts für Werkstoffkunde und Werkstoffmechanik der TU München, München, Austria. http://hdl.handle.net/20.500.12708/91681 ( reposiTUm)

Pahr, D. H., Hampel, S., & Rammerstorfer, F. G. (2003). Extensions and Implementation of Puck’s Uni-Directional Layered Laminate Damge Model in a Finite-Element Program. GAMM Jahreskonferenz 2003, Abano Terme, Italy, Austria. http://hdl.handle.net/20.500.12708/91604 ( reposiTUm)

Rammerstorfer, F. G. (2003). Micro-Meso-Macro Analysis of Composite Materials and Structures. Polnische Akademie der Wissenschaften, Inst. of Fundamental Technology Research, Warschau, Austria. http://hdl.handle.net/20.500.12708/91591 ( reposiTUm)

Ableidinger, A., Daxner, T., Böhm, H. J., & Rammerstorfer, F. G. (2003). Micro/Macro Simulations of Fracture in Open Cell Metallic Foams. 5th Euromech Solid Mechanics Conference ESMC-5, Thessaloniki, Austria. http://hdl.handle.net/20.500.12708/91634 ( reposiTUm)

Rammerstorfer, F. G., Fischer, F. D., & Friedl, N. (2003). Stability Problems Related to Thin Strip Production. 5th Euromech Solid Mechanics Conference ESMC-5, Thessaloniki, Austria. http://hdl.handle.net/20.500.12708/91633 ( reposiTUm)

Pahr, D. H., & Rammerstorfer, F. G. (2002). Multi-Scale Analyses of Perforated Laminates (H. A. Mang, F. G. Rammerstorfer, & J. Eberhardsteiner, Eds.). http://hdl.handle.net/20.500.12708/91446 ( reposiTUm)

Pahr, D. H., & Rammerstorfer, F. G. (2002). Meso-Macro Analyses of Perforated Laminates. International Conference on New Challenges in Mesomechanics, Aalborg, Denmark, Austria. http://hdl.handle.net/20.500.12708/91447 ( reposiTUm)

Rammerstorfer, F. G. (2002). Festigkeitsuntersuchungen am Erzherzog-Karl-Denkmal. Prof. Maurer 75-Jahre-Festkolloquium, Leoben, Austria. http://hdl.handle.net/20.500.12708/91454 ( reposiTUm)

Rammerstorfer, F. (2022). Buckling of Annular Plates under Tensile Loading - Plate to Beam Transitions (ILSB-Report 308). Inst Leichtbau und Struktur-Biomechanik, TU Wien. http://hdl.handle.net/20.500.12708/139131 ( reposiTUm)

Rammerstorfer, F. (2022). Buckling of Annular Plates under Tensile Loading - Plate to Beam Transitions (No. 308). http://hdl.handle.net/20.500.12708/192057 ( reposiTUm)

Wiesinger, A., Toth, F., & Rammerstorfer, F. G. (2014). Simulation of Crack Formation in Thin Copper Films on Polyimide Substrate (ILSB-Report 285). http://hdl.handle.net/20.500.12708/38083 ( reposiTUm)

Fischer, F. D., Oberaigner, E. R., Rammerstorfer, F. G., & Daxner, T. (2004). Flaring of a Tube - Analytical Approach. http://hdl.handle.net/20.500.12708/34466 ( reposiTUm)

Rammerstorfer, F. G., Fischer, F. D., & Friedl, N. (2003). Untersuchungen von eigenspannungsbehafteten Bändern bei Erwärmung und temperaturabhängigen Werkstoffeigenschaften - Sufe 1 im Projekt “Bandplanheit nach dem Durchzugsglühen von Stahlband.” http://hdl.handle.net/20.500.12708/34419 ( reposiTUm)

Pahr, D. H., & Rammerstorfer, F. G. (2002). Numerische Auswertung des Steifigkeits- und Festigkeitsverhaltens gelochter Faserverbundlaminate. http://hdl.handle.net/20.500.12708/34405 ( reposiTUm)

Friedl, N., & Rammerstorfer, F. G. (2002). Spannungsauswertung in eigenspannungsbehafteten Endlosbändern bei Reduktion der Vorspannung im bereits gebeulten Zustand. http://hdl.handle.net/20.500.12708/34352 ( reposiTUm)

Sander, F. G., Rammerstorfer, F. G., Nyashin, Y. I., & Simanovskaja, E. Y. (2002). Development of the Biomechanical Fundamentals of the Human Orthodontic Treatment. http://hdl.handle.net/20.500.12708/34354 ( reposiTUm)

Friedl, N., Fischer, F. D., & Rammerstorfer, F. G. (2002). Ergänzungen zum Bericht: Untersuchung der Welligkeit von dünnen Blechbändern. http://hdl.handle.net/20.500.12708/34351 ( reposiTUm)

Stewart, R. B., Marketz, F., Lohbeck, W. C. M., Fischer, F. D., Daves, W., Rammerstorfer, F. G., & Böhm, H. J. (1999). Expandable Wellbore Tubulars (SIEP 99-5628). http://hdl.handle.net/20.500.12708/36955 ( reposiTUm)