Deshpande, A., Baumann, C., Patrick Faue, Michael Mayer, Ressel, G., Friedrich Bleicher, & Frank E. Pfefferkorn. (2024). Fully Consolidated Deposits from Oxide Dispersion Strengthened and Silicon Steel Powders via Friction Surfacing. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 146(10), 1–9. https://doi.org/10.1115/1.4066040 ( reposiTUm)

Krall, S., Prießnitz, M., Baumann, C., Brandt, P., & Bleicher, F. (2023). Avoidance of Drill Cap Formation in CFRP-Titanium Stack Materials by Using Vibration Assisted Drilling with Defined Coupling of the Oscillation. Journal of Machine Engineering, 23, 5–27. https://doi.org/10.36897/jme/166274 ( reposiTUm)

Krall, S., Prießnitz, M., Baumann, C., & Bleicher, F. (2023). Non-destructive characterization of strain induced surface hardness increase by measuring magnetic properties of AISI 304. Materials & Design, 226, Article 111627. https://doi.org/10.1016/j.matdes.2023.111627 ( reposiTUm)

Agiwal, H., Baumann, C., Krall, S., Yeom, H., Sridharan, K., Bleicher, F., & Pfefferkorn, F. (2023). Towards Multilayered Coatings of 304L Stainless Steels Using Friction Surfacing. Journal of Manufacturing Science and Engineering, 145(1), Article 011001. https://doi.org/10.1115/1.4055050 ( reposiTUm)

Deshpande, A., Agiwal, H., Baumann, C., Krall, S., Bleicher, F., & Pfefferkorn, F. (2023). Recycling metal cutting chips into a consolidated deposition with friction surfacing. Manufacturing Letters, 35, 743–749. https://doi.org/10.1016/j.mfglet.2023.08.093 ( reposiTUm)

Krall, S., Baumann, C., Agiwal, H., Bleicher, F., & Pfefferkorn, F. (2022). Investigation Of Multilayer Coating Of En Aw 6060 - T66 Using Friction Surfacing. Journal of Machine Engineering. https://doi.org/10.36897/jme/147502 ( reposiTUm)

Bleicher, F., Baumann, C., Krall, S., Mates, S. P., & Herzig, S. (2021). Considering the influence of heating rate, complex hardening and dynamic strain aging in AISI 1045 machining: experiments and simulations. CIRP Annals - Manufacturing Technology, 70(1), 49–52. https://doi.org/10.1016/j.cirp.2021.04.083 ( reposiTUm)

Wiesinger, G., Baumann, C., & Krystian, M. (2017). Impact of Equal Channel Angular Pressing (ECAP) on the machinability of an aluminium alloy (EN AW-6082). Materials Today: Proceedings, 5(13), 26654–26660. http://hdl.handle.net/20.500.12708/148010 ( reposiTUm)

Schwarz, S., & Baumann, C. (2024). Deformation on steel surface due to chipping. In 14th ASEM Workshop on Advanced Electron Microscopy (p. 83). https://doi.org/10.34726/6360 ( reposiTUm)

Schwarz, S., & Baumann, C. (2024). Deformation of steel chips due to machining. In K. Qvortrup & K. Weede Alexander (Eds.), The 17th European Microscopy Congress (EMC 2024). https://doi.org/10.1051/bioconf/202412923040 ( reposiTUm)

Krall, S., Caudr, H., Prießnitz, M., Maier, S., Baumann, C., & Bleicher, F. (2024). Reluctance Based Actuator for Discrete Machine Hammer Peening. In Procedia CIRP (pp. 517–522). https://doi.org/10.1016/j.procir.2024.05.090 ( reposiTUm)

Baumann, C., Mates, S. P., Krall, S., & Bleicher, F. (2023). Introduction of a constitutive material model considering variable carbon content for cutting simulation. In V. Schulze & D. Biermann (Eds.), 19th CIRP Conference on Modeling of Machining Operations (pp. 305–310). Elsevier. https://doi.org/10.1016/j.procir.2023.03.052 ( reposiTUm)

Pfefferkorn, F., Agiwal, H., Krall, S., Baumann, C., & Bleicher, F. (2022). Solid-State Metal Additive Manufacturing. In F. Bleicher (Ed.), Smart and Networked Manufacturing - Wiener Produktionstechnik Kongress 2022 (pp. 118–121). new academic press og. http://hdl.handle.net/20.500.12708/139623 ( reposiTUm)

Bleicher, F., Ramsauer, C. M., Oswald, R., Wiesauer, M., Krall, S., Baumann, C., & Yamazaki, K. (2020). Machine diagnostics by means of a low-cost sensor integrated into the tooling system. In The Proceedings of MTTRF 2020 Meetings (pp. 45–54). http://hdl.handle.net/20.500.12708/68271 ( reposiTUm)

Bleicher, F., Brier, J., Baumann, C., Krall, S., Sacherl, J., & Yamazaki, K. (2020). Design concept of a long-stroke vibration-assisted actuator. In The Proceedings of MTTRF 2020 Meetings (pp. 131–136). http://hdl.handle.net/20.500.12708/68272 ( reposiTUm)

Wiesinger, G., Baumann, C., & Krystian, M. (2017). Impact Of The Ecap Process On The Machinability Of Aluminium (EN AW-6082). In DAS2017. 34th Danubia-Adria Symposium on Advances in Experimental Mechanics, Triest, Italy. http://hdl.handle.net/20.500.12708/67652 ( reposiTUm)

Bermanschläger, S. C., Baumann, C., Brünner, J., Mayrhofer, P. H., & Bleicher, F. (2025, June 25). Neuartige TiN-Schichten zur Reduzierung des Werkzeug-Verschleißes [Presentation]. AFA - Ausschuss für Arbeitstechnik, Österreichische Arbeitsgruppe für Zerspanungstechnik, Nußbach, Austria. ( reposiTUm)

Bermanschläger, S. C., Baumann, C., Brünner, J., Mayrhofer, P. H., & Bleicher, F. (2025, June 16). Comparative study of the performance of TiN, (Ti,Al)N, and (Ti,Al,Ta,Ce)N coatings in dry longitudinal turning experiments on C45 [Conference Presentation]. ÖGV-Seminar 2025, Austria. ( reposiTUm)

Baumann, C., Mates, S. P., & Bleicher, F. (2024, February 21). Cutting simulation with a carbon-dependent material model [Poster Presentation]. 1st Faculty Science Day of the Faculty of Mechanical and Industrial Engineering, Wien, Austria. http://hdl.handle.net/20.500.12708/195024 ( reposiTUm)

Baumann, C., Mates, S. P., Krall, S., Maier, S., & Bleicher, F. (2023, December 5). Investigating the Utility of a Complex Material Model for Simulating Carbon Steel Machining [Conference Presentation]. 16. International Nordmetall Colloquium, Chemnitz, Germany. http://hdl.handle.net/20.500.12708/190412 ( reposiTUm)

Deshpande, A., Agiwal, H., Baumann, C., Krall, S., Bleicher, F., & Pfefferkorn, F. (2023, June 16). Recycling Metal Cutting Chips into a Consolidated Coating Deposition with Friction Surfacing [Conference Presentation]. 51st SME North American Manufacturing Research Conference 2023, New Brunswick, New Jersey, United States of America (the). http://hdl.handle.net/20.500.12708/191040 ( reposiTUm)

Agiwal, H., Baumann, C., Krall, S., Yeom, H., Sridharan, K., Bleicher, F., & Pfefferkorn, F. (2022, July 1). Towards Multilayered Coatings of 304L Stainless Steels Using Friction Surfacing [Conference Presentation]. Manufacturing Science and Engineering Conference (MSEC 2022), United States of America (the). http://hdl.handle.net/20.500.12708/192923 ( reposiTUm)

Krall, S., Baumann, C., Agiwal, H., Bleicher, F., & Pfefferkorn, F. (2022, June 30). Investigation Of Multilayer Coating Of En Aw 6060 - T66 Using Friction Surfacing [Conference Presentation]. XXXIII CIRP Sponsored Conference on Supervising and Diagnostics of Machining Systems, KARPACZ, Poland. http://hdl.handle.net/20.500.12708/153784 ( reposiTUm)

Bleicher, F., Baumann, C., Krall, S., & Pfefferkorn, F. (2022, August 25). Recycling and Upcycling of chips waste material by using friction surfacing [Conference Presentation]. CIRP STC-CWG Industrial Symbiosis 2022, Bilbao, Spain. http://hdl.handle.net/20.500.12708/153367 ( reposiTUm)

Mauthner, G., Christopher Mentrup, Simon Waldl, Einspieler, C., Krall, S., Baumann, C., Bleicher, F., & Trautner, T. F. (2022, November 29). CAD/CAM und Simulation für EinsteigerInnen [Presentation]. EIT Manufacturing Seminar - CAMplus4.0, TEC-Lab Arsenal, Austria. http://hdl.handle.net/20.500.12708/154251 ( reposiTUm)

Baumann, C., Maier, S., & Krall, S. (2021). F&E-Besprechung. Abschlussbericht voestalpine BÖHLER Bleche Tool comparison Walter tools/Six Sigma tools, Mürzzuschlag, Austria. http://hdl.handle.net/20.500.12708/95560 ( reposiTUm)

Baumann, C., Biegl, S., & Krall, S. (2021). Abschlussprojektmeeting, voestalpine BÖHLER Bleche GmbH & Co KG. Abschlussbericht voestalpine BÖHLER Bleche Tool comparison Boehlerit/TCM, Mürzzuschlag, Austria. http://hdl.handle.net/20.500.12708/95559 ( reposiTUm)

Baumann, C., Lamprecht, M., Biegl, S., & Krall, S. (2021). Abschlussbesprechung Fertigungsparameter Leichtbaustahl. Abschlussbericht Rheinmetall Waffe Munition GmbH - Werkstoffqualifizierung eines Leichtbaustahls, Deutschland, Germany. http://hdl.handle.net/20.500.12708/95562 ( reposiTUm)

Baumann, C., Maier, S., & Krall, S. (2021). 6. Quarterly Meeting - MCC. Quarterly Meeting - Abschlussbericht voestalpine BÖHLER Bleche Tool comparison Walter tools/Six Sigma tools, Mürzzuschlag, Austria. http://hdl.handle.net/20.500.12708/95561 ( reposiTUm)

Baumann, C. (2021). 5. Quarterly Meeting - MCC. Quarterly Meeting - MCC voestalpine BÖHLER Bleche Tool comparison Walter tools/Six Sigma tools, Mürzzuschlag, Austria. http://hdl.handle.net/20.500.12708/95563 ( reposiTUm)

Baumann, C. (2020). 4. Quarterly Meeting - MCC. Quarterly Meeting - Abschlussbericht MCC Face milling - Buderus, Österreich, Austria. http://hdl.handle.net/20.500.12708/95564 ( reposiTUm)

Baumann, C. (2020). 3. Quarterly Meeting - MCC. Quarterly Meeting - MCC Face milling - Buderus, Österreich, Austria. http://hdl.handle.net/20.500.12708/95565 ( reposiTUm)

Baumann, C. (2020). 2. Quarterly Meeting - MCC. Quarterly Meeting - MCC Face milling - Buderus, Österreich, Austria. http://hdl.handle.net/20.500.12708/95566 ( reposiTUm)

Baumann, C. (2020). 2D - Modellierung des Orthogonalschnittes u. Vorstellung des Orthogonalschnittversuchs. AfA Jahresabschluss 2020, Webmeeting; Institut für Fertigungstechnik und Photonische Technologien der TU Wien TEC-Lab Labor für Fertigungstechnik, Franz Grill Straße 4, Objekt 221, 1030 Wien, Austria. http://hdl.handle.net/20.500.12708/95389 ( reposiTUm)

Baumann, C. (2019). Quarterly Meeting - MCC Face milling - Buderus. 1. Quarterly Meeting - MCC, TEC-Labor, Franz Grill Straße 4, Obj. OA, 1030 Wien, Austria. http://hdl.handle.net/20.500.12708/95352 ( reposiTUm)

Wiesinger, G., Finkeldei, D., Baumann, C., Petzenhammer, F., & Bleicher, F. (2018). Previous benchmarks at the TU Wien. AfA Jahresabschluss 2018, Institut für Fertigungstechnik und Hochleistungslasertechnik der TU Wien TEC-Lab Labor für Fertigungstechnik, Franz Grill Straße 4, Objekt 221, 1030 Wien, Austria. http://hdl.handle.net/20.500.12708/94962 ( reposiTUm)

Baumann, C. (2018). Vibration-assisted drilling of multilayer CFRP / Ti/ Al stacks. AfA Jahresabschluss 2018, Institut für Fertigungstechnik und Hochleistungslasertechnik der TU Wien TEC-Lab Labor für Fertigungstechnik, Franz Grill Straße 4, Objekt 221, 1030 Wien, Austria. http://hdl.handle.net/20.500.12708/94964 ( reposiTUm)

Bleicher, F., Wiesinger, G., Kumpf, C., Finkeldei, D., Baumann, C., & Lechner, C. (2018). Schwingungsunterstützte Bearbeitung von CFK/Stahl-Hybridwerkstoffen. AfA-Exkursion-Pöttinger, PÖTTINGER Landtechnik GmbH: Industriegelände 1; 4710 Grieskirchen, Austria. http://hdl.handle.net/20.500.12708/94868 ( reposiTUm)

Wiesinger, G., & Baumann, C. (2017). Fibercut Benchmark 2017 / 2018. AfA-Jahresabschluss 2017, Technologiezentrum aspern IQ / Pilotfabrik, Austria. http://hdl.handle.net/20.500.12708/94685 ( reposiTUm)

Baumann, C., & Wiesinger, G. (2017). Ergebnisse der Drehversuche (Titanlegierung + Aluminium). 8. Projektmeeting “inForm” (AIT), Wr. Neustadt, Austria. http://hdl.handle.net/20.500.12708/94647 ( reposiTUm)

Ramsauer, C. M., Greitler, J.-A., Baumann, C., Habersohn, C., & Bleicher, F. (2024). Autonomous process control enabled by smart tool holder and digital interfacing. ( reposiTUm)

Baumann, C., Maier, S., & Bleicher, F. (2024). Friction coefficient appropriate for simulation of cutting processes. ( reposiTUm)

Ramsauer, C. M., Greitler, J.-A., Krause, M. W., Habersohn, C., Baumann, C., & Bleicher, F. (2024). Development and experimental testing of a novel method to sense cutting force in shell mill cutters : MTTRF - Report: NHX6300 from 2021 - 2023. http://hdl.handle.net/20.500.12708/196626 ( reposiTUm)

Brier, J., Baumann, C., & Bleicher, F. (2024). Development of a Long-Stroke Vibration-assisted Actuator. ( reposiTUm)

Baumann, C., Prießnitz, M., Maier, S., Krall, S., Habersohn, C., & Bleicher, F. (2024). Investigation of two MHP process methods and new Actuator design. ( reposiTUm)

Krall, S., & Baumann, C. (2021). Endbericht Prototypenförderung der AWS. ( reposiTUm)

Bleicher, F., Pfefferkorn, F., Schmitz, T., Krall, S., Baumann, C., Ramsauer, C. M., & Leitner, D. (2021). Zwischenbericht FFG Projekt OMAHA-Project (ACAMS) (No. 2). http://hdl.handle.net/20.500.12708/40408 ( reposiTUm)

Prießnitz, M., Baumann, C., & Krall, S. (2021). Zwischenbericht FFG Projekt VIPER (No. 2). http://hdl.handle.net/20.500.12708/40407 ( reposiTUm)

Bleicher, F., Pfefferkorn, F., Schmitz, T., Krall, S., Baumann, C., Ramsauer, C. M., & Leitner, D. (2021). Zwischenbericht Stiftungsprofessur: OMAHA-Project (ACAMS). http://hdl.handle.net/20.500.12708/154411 ( reposiTUm)

Prießnitz, M., Baumann, C., & Krall, S. (2020). Zwischenbericht FFG Projekt VIPER (No. 1). http://hdl.handle.net/20.500.12708/40409 ( reposiTUm)

Bleicher, F., Pfefferkorn, F., Schmitz, T., Krall, S., & Baumann, C. (2020). Zwischenbericht FFG Projekt OMAHA-Project (ACAMS) (No. 1). http://hdl.handle.net/20.500.12708/40410 ( reposiTUm)

Baumann, C. (2017). Einfluss des ECAP-Prozesses auf das Drehen von Titanlegierung und Aluminium [Diploma Thesis, Technische Universität Wien]. reposiTUm. https://doi.org/10.34726/hss.2017.38463 ( reposiTUm)