Cong, B., Yoo, H. W., Pechgraber, D., & Schitter, G. (2025). High-Speed and High-Resolution Polygon Mirror-Based Industrial Stereolithography With Advanced Active Error Compensation. IEEE-ASME TRANSACTIONS ON MECHATRONICS, 1–10. https://doi.org/10.1109/TMECH.2025.3527648 ( reposiTUm)

Hackl, T., Poik, M., & Schitter, G. (2024). Single-Harmonic Response Open-Loop Kelvin-Probe Force Microscopy. IEEE Transactions on Instrumentation and Measurement, 73, 1–7. https://doi.org/10.1109/TIM.2024.3366573 ( reposiTUm)

Ojdanic, D., Naverschnigg, C., Sinn, A., Zelinskyi, D., & Schitter, G. (2024). Parallel Architecture for Low Latency UAV Detection and Tracking Using Robotic Telescopes. IEEE Transactions on Aerospace and Electronic Systems. https://doi.org/10.1109/TAES.2024.3396418 ( reposiTUm)

Pechgraber, D., Wiesböck, J., Csencsics, E. K., & Schitter, G. (2024). Switched Amplifier-Driven Nanopositioning: Integrating System Modeling and Control Tuning. IEEE Transactions on Industrial Electronics. https://doi.org/10.1109/TIE.2024.3429628 ( reposiTUm)

Laimer, M., Wertjanz, D., Gsellmann, P., Schitter, G., & Csencsics, E. (2024). High-Precision 3-D Measurements on Moving Objects. IEEE-ASME TRANSACTIONS ON MECHATRONICS. https://doi.org/10.1109/TMECH.2024.3435999 ( reposiTUm)

Kern, T., Laimer, M., Schitter, G., & Csencsics, E. (2024). Laser triangulation measurements on moving samples with reduced lateral feature uncertainty. IEEE Transactions on Instrumentation and Measurement, 1–1. https://doi.org/10.1109/TIM.2024.3480193 ( reposiTUm)

Pechhacker, A., Csencsics, E. K., & Schitter, G. (2024). Decreasing the non-linearity of hybrid reluctance actuators by air gap design. PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 91, 255–262. https://doi.org/10.1016/j.precisioneng.2024.09.018 ( reposiTUm)

Naverschnigg, C., Ojdanic, D., Sinn, A., & Schitter, G. (2024). Analysis and Control of a Robotic Telescope System for High-Speed Small-UAV Tracking. IEEE Aerospace and Electronic Systems Magazine, 1–10. https://doi.org/10.1109/MAES.2024.3515894 ( reposiTUm)

Poik, M., Hackl, T., Di Martino, S., Berger, B. M., Sattler, S. W., & Schitter, G. (2024). A contactless method for measuring amplitude and phase of RF voltages up to 26.5GHz. IEEE Sensors Journal. https://doi.org/10.1109/JSEN.2024.3354322 ( reposiTUm)

Rufin, M., Nalbach, M., Rakuš, M., Fuchs, M., Poik, M., Schitter, G., Thurner, P. J., & Andriotis, O. G. (2024). Methylglyoxal alters collagen fibril nanostiffness and surface potential. Acta Biomaterialia, 189, 208–216. https://doi.org/10.1016/j.actbio.2024.08.039 ( reposiTUm)

Ojdanić, D., Zelinskyi, D., Naverschnigg, C., Sinn, A., & Schitter, G. (2024). High-speed telescope autofocus for UAV detection and tracking. Optics Express, 32(5), 7147–7157. https://doi.org/10.1364/OE.514859 ( reposiTUm)

Nonay, J. R., Rüddenklau, R., Sinn, A., Jakobs, J. P., Berlitz, J., Rödiger, B., & Schitter, G. (2024). Horizontal free-space optical link with CubeISL over 143 km. JOURNAL OF OPTICAL COMMUNICATIONS AND NETWORKING, 16(5), 593–601. https://doi.org/10.1364/JOCN.518271 ( reposiTUm)

Wertjanz, D., Berlakovich, N., Csencsics, E., & Schitter, G. (2023). Range extension for large-scale robotic precision 3-D measurements in vibration-prone environments. IEEE Transactions on Instrumentation and Measurement, 72, 1–7. https://doi.org/10.1109/TIM.2023.3268473 ( reposiTUm)

Pechhacker, A., Wertjanz, D., Csencsics, E. K., & Schitter, G. (2023). Integrated electromagnetic actuator with adaptable zero power gravity compensation. IEEE Transactions on Industrial Electronics, 1–9. https://doi.org/10.1109/TIE.2023.3288176 ( reposiTUm)

Pechgraber, D., Csencsics, E., & Schitter, G. (2023). Resonant Rotational Reluctance Actuator for Large Range Scanning Mirrors. IEEE/ASME Transactions on Mechatronics, 1–10. https://doi.org/10.1109/TMECH.2023.3252940 ( reposiTUm)

Ojdanic, D., Sinn, A., Naverschnigg, C., & Schitter, G. (2023). Feasibility Analysis of Optical UAV Detection Over Long Distances Using Robotic Telescopes. IEEE Transactions on Aerospace and Electronic Systems, 1–10. https://doi.org/10.1109/TAES.2023.3248560 ( reposiTUm)

Berlakovich, N., Csencsics, E., Senoner, D., & Schitter, G. (2023). Reconstructing highly divergent wavefronts from sparse measurements. Applied Optics, 62(36), 9583–9590. https://doi.org/10.1364/AO.502824 ( reposiTUm)

Csencsics, E., Friedl, B., & Schitter, G. (2023). Shaping the Dynamics of a Low-Stiffness Positioning System by Mechatronic Design for Enabling Stable Unity Gain Feedback. Journal of Dynamic Systems, Measurement, and Control, 145(10), Article 101001. https://doi.org/10.1115/1.4063074 ( reposiTUm)

Csencsics, E. K., Schlarp, J., Glaser, T., Wolf, T., & Schitter, G. (2023). Reducing the Speckle-induced Measurement Uncertainty in Laser Triangulation Sensors. IEEE Transactions on Instrumentation and Measurement, 72, Article 7000809. https://doi.org/10.1109/TIM.2022.3230481 ( reposiTUm)

Poik, M., Hackl, T., Di Martino, S., Schober, M., Dang, J., & Schitter, G. (2023). Model-Based RF Sensing for Contactless High-Resolution Voltage Measurements. IEEE Transactions on Instrumentation and Measurement, 72, 1–8. https://doi.org/10.1109/TIM.2023.3317385 ( reposiTUm)

Berlakovich, N., Csencsics, E., Senoner, D., & Schitter, G. (2023). Fast modal reconstruction of large plane wavefronts from sparse measurements using Shack-Hartmann sensors. Applied Optics, 62(26), 6986–6992. https://doi.org/10.1364/AO.493076 ( reposiTUm)

Schwaer, C., Sinn, A., Schröer, L., Wallner, T., & Schitter, G. (2023). Active lateral support system for a thin 1-meter meniscus mirror with virtual fixed points. JOURNAL OF ASTRONOMICAL TELESCOPES INSTRUMENTS AND SYSTEMS, 9(2), Article 029003. https://doi.org/10.1117/1.JATIS.9.2.029003 ( reposiTUm)

Naverschnigg, C., Csencsics, E., & Schitter, G. (2022). Flexible Robot-Based In-Line Measurement System for High-Precision Optical Surface Inspection. IEEE Transactions on Instrumentation and Measurement, 71, 1–9. https://doi.org/10.1109/TIM.2022.3216680 ( reposiTUm)

Haider, C., Fuerst, M. E., Laimer, M., Csencsics, E., & Schitter, G. (2022). Range-extended confocal chromatic sensor system for double-sided measurement of optical components with high lateral resolution. IEEE Transactions on Instrumentation and Measurement, 71. https://doi.org/10.1109/TIM.2022.3216679 ( reposiTUm)

Ojdanić, D., Gräf, B., Sinn, A., Yoo, H. W., & Schitter, G. (2022). Camera-guided real-time laser ranging for multi-UAV distance measurement. Applied Optics, 61(31), 9233–9240. https://doi.org/10.1364/AO.470361 ( reposiTUm)

Csencsics, E., Wolf, T., & Schitter, G. (2022). Efficient framework for the simulation of translational and rotational laser speckle displacement in optical sensor assemblies. Optical Engineering, 61(06), Article 061410. https://doi.org/10.1117/1.OE.61.6.061410 ( reposiTUm)

Hackl, T., Schitter, G., & Mesquida, P. (2022). AC Kelvin Probe Force Microscopy Enables Charge Mapping in Water. ACS Nano. https://doi.org/10.1021/acsnano.2c07121 ( reposiTUm)

Wertjanz, D., Csencsics, E., Kern, T., & Schitter, G. (2022). Bringing the lab to the fab: Robot-based inline measurement system for precise 3D surface inspection in vibrational environments. IEEE Transactions on Industrial Electronics, 69(10), 10666–10673. https://doi.org/10.1109/tie.2022.3151959 ( reposiTUm)

Sinn, A., Prager, P., Schwaer, C., & Schitter, G. (2022). Design and Evaluation of an Active Secondary Mirror Positioning System for a Small Telescope. JOURNAL OF ASTRONOMICAL TELESCOPES INSTRUMENTS AND SYSTEMS, 8(02). https://doi.org/10.1117/1.jatis.8.2.029007 ( reposiTUm)

Berlakovich, N., Fuerst, M., Csencsics, E., & Schitter, G. (2022). Improving the precision of parallel registration by incorporating a priori information. Optics Express, 30(23), 41473–41491. https://doi.org/10.1364/OE.469299 ( reposiTUm)

Hackl, T., Poik, M., & Schitter, G. (2022). Heterodyne AC Kelvin Probe Force Microscopy for Nanoscale Surface Potential Imaging in Liquids. IEEE Transactions on Instrumentation and Measurement, 72, 1–8. https://doi.org/10.1109/TIM.2022.3230477 ( reposiTUm)

Yoo, H. W., Brunner, D., Macho, M., Niedermueller, L., Devesa, A. J., Kormann, L., & Schitter, G. (2022). Evaluation of robustness against external vibrations for long-range MEMS lidar with one-dimensional resonant micromirror. Journal of Optical Microsystems, 2(01). https://doi.org/10.1117/1.jom.2.1.011007 ( reposiTUm)

Motoi, N., Nalbach, M., Ito, S., Thurner, P., & Schitter, G. (2022). Force-Controlled Tensile Test of Collagen Fibril by Using 2-DOF Control System With Modeling Error Compensation. IEEE Open Journal of the Industrial Electronics Society, 3, 366–374. https://doi.org/10.1109/OJIES.2022.3179682 ( reposiTUm)

Galffy, A., Gaggl, R., Mühlbacher, R., Frank, D., Schlarp, J., & Schitter, G. (2021). Turbulence load prediction for manned and unmanned aircraft by means of anticipating differential pressure measurements. CEAS Aeronautical Journal, 12(3), 535–548. https://doi.org/10.1007/s13272-021-00512-y ( reposiTUm)

Yoo, H. W., Riegler, R., Brunner, D., Albert, S., Thurner, T., & Schitter, G. (2021). Experimental Evaluation of Vibration Influence on a Resonant MEMS Scanning System for Automotive Lidars. IEEE Transactions on Industrial Electronics, 69(3), 3099–3108. https://doi.org/10.1109/tie.2021.3065608 ( reposiTUm)

Yoo, H. W., Albert, S., & Schitter, G. (2021). Fourier Series based Analytic Model of a Resonant MEMS Mirror for General Voltage Inputs. Journal of Microelectromechanical Systems, 30(3), 343–359. https://doi.org/10.1109/jmems.2021.3072795 ( reposiTUm)

Berlakovich, N., Fuerst, M., Csencsics, E., & Schitter, G. (2021). Robust wavefront segment registration based on a parallel approach. Applied Optics, 60(6), 1578. https://doi.org/10.1364/ao.413207 ( reposiTUm)

Brunner, D., Albert, S., Hennecke, M., Darrer, F., & Schitter, G. (2021). Self-sensing control of resonant MEMS scanner by comb-drive current feedback. Mechatronics, 78(102631), 102631. https://doi.org/10.1016/j.mechatronics.2021.102631 ( reposiTUm)

Wertjanz, D., Csencsics, E., & Schitter, G. (2021). 3 DoF Vibration Compensation Platform for Robot-Based Precision Inline Measurements on Free-Form Surfaces. IEEE Transactions on Industrial Electronics, 69(1), 613–621. https://doi.org/10.1109/tie.2021.3055132 ( reposiTUm)

Brunner, D., Yoo, H. W., Schroedter, R., & Schitter, G. (2021). Adaptive Lissajous scanning pattern design by phase modulation. Optics Express, 29(18), 27989. https://doi.org/10.1364/oe.430171 ( reposiTUm)

Wertjanz, D., Kern, T., Csencsics, E., Stadler, G., & Schitter, G. (2021). Compact scanning confocal chromatic sensor enabling precision 3-D measurements. Applied Optics, 60(25), 7511. https://doi.org/10.1364/ao.428374 ( reposiTUm)

Schroedter, R., Yoo, H. W., Brunner, D., & Schitter, G. (2021). Charge-Based Capacitive Self-Sensing With Continuous State Observation for Resonant Electrostatic MEMS Mirrors. Journal of Microelectromechanical Systems, 30(6), 897–906. https://doi.org/10.1109/jmems.2021.3107797 ( reposiTUm)

Berlakovich, N., Csencsics, E., Fuerst, M., & Schitter, G. (2021). Iterative parallel registration of strongly misaligned wavefront segments. Optics Express, 29(21), 33281. https://doi.org/10.1364/oe.438350 ( reposiTUm)

Csencsics, E., Thier, M., Ito, S., & Schitter, G. (2021). Supplemental Peak Filters for Advanced Disturbance Rejection on a High Precision Endeffector for Robot-based Inline Metrology. IEEE/ASME Transactions on Mechatronics, 27(4), 2258–2266. https://doi.org/10.1109/tmech.2021.3103040 ( reposiTUm)

Melik-Merkumians, M., Gsellmann, P., & Schitter, G. (2021). Modularisierung von Steuerungssoftware: Effizientes Engineering mit IEC 61131 und IEC 61499. Elektrotechnik und Informationstechnik : e & i, 138(6), 309–314. https://doi.org/10.1007/s00502-021-00918-w ( reposiTUm)

Stadler, G., Csencsics, E., Ito, S., & Schitter, G. (2021). High Precision Hybrid Reluctance Actuator with Integrated Orientation Independent Zero Power Gravity Compensation. IEEE Transactions on Industrial Electronics, 69(12), 13296–13304. https://doi.org/10.1109/tie.2021.3137444 ( reposiTUm)

Brunner, D., Yoo, H. W., & Schitter, G. (2021). Linear Modeling and Control of Comb-Actuated Resonant MEMS Mirror with Nonlinear Dynamics. IEEE Transactions on Industrial Electronics, 68(4), 3315–3323. https://doi.org/10.1109/tie.2020.2982124 ( reposiTUm)

Berlakovich, N., Csencsics, E., Fuerst, M., & Schitter, G. (2021). Fast, precise and shape-flexible registration of wavefronts. Applied Optics, 60(23), 6781. https://doi.org/10.1364/ao.425493 ( reposiTUm)

Ito, S., Pirker, S., & Schitter, G. (2021). Integrating PWM amplifier with the design of mechatronic systems for energy-efficient precision motion. IEEJ Journal of Industry Applications / Institute of Electrical Engineers in Japan, 10(2), 134–141. https://doi.org/10.1541/ieejjia.20004386 ( reposiTUm)

Gsellmann, P., Melik-Merkumians, M., Zoitl, A., & Schitter, G. (2021). A Novel Approach for Integrating IEC 61131-3 Engineering and Execution into IEC 61499. IEEE Transactions on Industrial Informatics, 17(8), 5411–5418. https://doi.org/10.1109/tii.2020.3033330 ( reposiTUm)

Melik-Merkumians, M., Gsellmann, P., & Schitter, G. (2021). Modularisierung von Steuerungssoftware : Effizientes Engineering mit IEC 61131 und IEC 61499. Elektrotechnik und Informationstechnik : e & i, 138(6), 309–314. https://doi.org/10.1007/s00502-021-00918-w ( reposiTUm)

Poik, M., Kohl, D., Mayr, M., Kerschner, C., & Schitter, G. (2020). A Mechatronic Lock-In Amplifier: Integrating Demodulation in Sensor Electronics for Measuring Mechanical Oscillations. IEEE Transactions on Instrumentation and Measurement, 70, 1–8. https://doi.org/10.1109/tim.2020.3047208 ( reposiTUm)

Ruiz‑Ortega, L. I., Mesquida, P., Schitter, G., & Tang, B. (2020). Imaging and tracking an electrostatic charge micro-domain by Kelvin force microscopy as evidence of water adsorption on mica surface. Current Applied Physics, 20(12), 1391–1395. https://doi.org/10.1016/j.cap.2020.09.008 ( reposiTUm)

Schlarp, J., Csencsics, E., & Schitter, G. (2020). Optical scanning of a laser triangulation sensor for 3D imaging. IEEE Transactions on Instrumentation and Measurement, 69(6), 3606–3613. https://doi.org/10.1109/tim.2019.2933343 ( reposiTUm)

Riel, T., Galffy, A., Janisch, G., Wertjanz, D., Sinn, A., Schwaer, C., & Schitter, G. (2020). High performance motion control for optical satellite tracking systems. Advances in Space Research, 65(5), 1333–1343. https://doi.org/10.1016/j.asr.2019.11.039 ( reposiTUm)

Bansode, S., Bashtanova, U., Li, R., Clark, J., Müller, K. H., Puszkarska, A., Goldberga, I., Chetwood, H. H., Reid, D. G., Colwell, L. J., Skepper, J. N., Shanahan, C. M., Schitter, G., Mesquida, P., & Duer, M. J. (2020). Glycation changes molecular organization and charge distribution in type I collagen fibrils. Scientific Reports, 10, Article 3397. https://doi.org/10.1038/s41598-020-60250-9 ( reposiTUm)

Ito, S., Poik, M., Schlarp, J., & Schitter, G. (2020). Atomic Force Microscopy Breaking Through the Vertical Range-Bandwidth Tradeoff. IEEE Transactions on Industrial Electronics, 68(1), 786–795. https://doi.org/10.1109/tie.2020.2982113 ( reposiTUm)

Cigarini, F., Csencsics, E., Schlarp, J., Ito, S., & Schitter, G. (2020). Multiphysics Finite Element Model for the Computation of the Electro-mechanical Dynamics of a Hybrid Reluctance Actuator. Mathematical and Computer Modelling of Dynamical Systems, 26(4), 322–343. https://doi.org/10.1080/13873954.2020.1766509 ( reposiTUm)

Csencsics, E., & Schitter, G. (2020). Exploring the Pareto Fronts of Actuation Technologies for High Performance Mechatronic Systems. IEEE/ASME Transactions on Mechatronics, 26(2), 1053–1063. https://doi.org/10.1109/tmech.2020.3016087 ( reposiTUm)

Schwaer, C., Sinn, A., Keller, P., & Schitter, G. (2020). Design methodology to develop an active optics system for a thin 1-m meniscus mirror. JOURNAL OF ASTRONOMICAL TELESCOPES INSTRUMENTS AND SYSTEMS, 6(04). https://doi.org/10.1117/1.jatis.6.4.049002 ( reposiTUm)

Ito, S., Poik, M., Csencsics, E., Schlarp, J., & Schitter, G. (2020). High-speed scanning chromatic confocal sensor for 3-D imaging with modeling-free learning control. Applied Optics, 59(29), 9234. https://doi.org/10.1364/ao.399760 ( reposiTUm)

Yoo, H. W., Albert, S., & Schitter, G. (2020). Accurate Analytic Model of a Parametrically Driven Resonant MEMS Mirror with a Fourier Series Based Torque Approximation. Journal of Microelectromechanical Systems, 29(6), 1431–1442. https://doi.org/10.1109/jmems.2020.3024752 ( reposiTUm)

Schlarp, J., Csencsics, E., & Schitter, G. (2020). Design and evaluation of an integrated scanning laser triangulation sensor. Mechatronics, 72(102453), 102453. https://doi.org/10.1016/j.mechatronics.2020.102453 ( reposiTUm)

Fuerst, M. E., Csencsics, E., Berlakovich, N., & Schitter, G. (2020). Automated Measurement of Highly Divergent Optical Wavefronts with a Scanning Shack-Hartmann Sensor. IEEE Transactions on Instrumentation and Measurement, 70, 1–9. https://doi.org/10.1109/tim.2020.3038002 ( reposiTUm)

Fuerst, M., Csencsics, E., Haider, C., & Schitter, G. (2020). Confocal chromatic sensor with actively tilted lens for 3D measurement. Journal of the Optical Society of America A, 37(9), B46. https://doi.org/10.1364/josaa.394212 ( reposiTUm)

Brunner, D., Yoo, H. W., & Schitter, G. (2020). Precise phase control of resonant MOEMS mirrors by comb-drive current feedback. Mechatronics, 71(102420), 102420. https://doi.org/10.1016/j.mechatronics.2020.102420 ( reposiTUm)

Csencsics, E., Sitz, B., & Schitter, G. (2020). Integration of Control Design and System Operation of a High Performance Piezo-actuated Fast Steering Mirror. IEEE/ASME Transactions on Mechatronics, 25(1), 239–247. https://doi.org/10.1109/tmech.2019.2959087 ( reposiTUm)

Csencsics, E., Schlarp, J., Schopf, T., & Schitter, G. (2019). Compact High Performance Hybrid Reluctance Actuated Fast Steering Mirror System. Mechatronics, 62(102251), 102251. https://doi.org/10.1016/j.mechatronics.2019.102251 ( reposiTUm)

Riel, T., Sinn, A., Schwaer, C., Ploner, M., & Schitter, G. (2019). Iterative Trajectory Learning for Highly Accurate Optical Satellite Tracking Systems. Acta Astronautica, 164, 121–129. https://doi.org/10.1016/j.actaastro.2019.07.012 ( reposiTUm)

Mesquida, P., Kohl, D., & Schitter, G. (2019). Signal reversal in Kelvin-probe force microscopy. Review of Scientific Instruments, 90(11), 113703. https://doi.org/10.1063/1.5118357 ( reposiTUm)

Bibl, M., Zech, C., & Schitter, G. (2019). Vision-Based Nonlinear Feedback Control of a Ball on Ball System With a Programmable Logic Controller. IEEJ Journal of Industry Applications / Institute of Electrical Engineers in Japan, 8(4), 713–719. https://doi.org/10.1541/ieejjia.8.713 ( reposiTUm)

Ruiz‑Ortega, L. I., Schitter, G., & Mesquida, P. (2019). Electrostatic Read Out for Label‑Free Assays Based on Kelvin Force Principle. Sensing and Imaging, 20, Article 23. https://doi.org/10.1007/s11220-019-0244-0 ( reposiTUm)

Ito, S., Cigarini, F., & Schitter, G. (2019). Flux-controlled Hybrid Reluctance Actuator for High-precision Scanning Motion. IEEE Transactions on Industrial Electronics, 67(11), 9593–9600. https://doi.org/10.1109/tie.2019.2952829 ( reposiTUm)

Csencsics, E., Ito, S., Schlarp, J., & Schitter, G. (2019). System Integration and Control for 3D Scanning Laser Metrology. IEEJ Journal of Industry Applications / Institute of Electrical Engineers in Japan, 8(2), 207–217. https://doi.org/10.1541/ieejjia.8.207 ( reposiTUm)

Cigarini, F., Ito, S., Troppmair, S., & Schitter, G. (2019). Comparative Finite Element Analysis of a Voice Coil Actuator and a Hybrid Reluctance Actuator. IEEJ Journal of Industry Applications / Institute of Electrical Engineers in Japan, 8(2), 192–199. https://doi.org/10.1541/ieejjia.8.192 ( reposiTUm)

Ito, S., Troppmair, S., Cigarini, F., & Schitter, G. (2019). High-speed Scanner with Nanometer Resolution Using a Hybrid Reluctance Force Actuator. IEEJ Journal of Industry Applications / Institute of Electrical Engineers in Japan, 8(2), 170–176. https://doi.org/10.1541/ieejjia.8.170 ( reposiTUm)

Ito, S., Troppmair, S., Lindner, B., Cigarini, F., & Schitter, G. (2019). Long-range Fast Nanopositioner Using Nonlinearities of Hybrid Reluctance Actuator for Energy Efficiency. IEEE Transactions on Industrial Electronics, 66(4), 3051–3059. https://doi.org/10.1109/tie.2018.2842735 ( reposiTUm)

Csencsics, E. K., Ito, S., Schlarp, J., Thier, M., & Schitter, G. (2018). Hochpräzise roboterbasierte 3D-In-Prozess-Messtechnik. Elektrotechnik und Informationstechnik : e & i, 135(6), 382–388. https://doi.org/10.1007/s00502-018-0636-1 ( reposiTUm)

Bibl, M., Stein, R., Döberl, E., & Schitter, G. (2018). Rotierender optischer Positions- und Winkelsensor. Elektrotechnik und Informationstechnik : e & i, 135(6), 396–400. https://doi.org/10.1007/s00502-018-0642-3 ( reposiTUm)

Csencsics, E., Thier, M., Hainisch, R., & Schitter, G. (2018). System and Control Design of a Voice Coil Actuated Mechanically Decoupling Two-body Vibration Isolation System. IEEE/ASME Transactions on Mechatronics, 23(1), 321–330. https://doi.org/10.1109/tmech.2017.2771440 ( reposiTUm)

Ito, S., & Schitter, G. (2018). Atomic Force Microscopy Capable of Vibration Isolation with Low-stiffness Z-axis Actuation. Ultramicroscopy, 186, 9–17. https://doi.org/10.1016/j.ultramic.2017.12.007 ( reposiTUm)

Csencsics, E., Schlarp, J., & Schitter, G. (2018). High Performance Hybrid-Reluctance-Force-based Tip/tilt System: Design, Control and Evaluation. IEEE/ASME Transactions on Mechatronics, 23(5), 2494–2502. https://doi.org/10.1109/tmech.2018.2866272 ( reposiTUm)

Mesquida, P., Kohl, D., Bansode, S., Duer, M., & Schitter, G. (2018). Water desorption in Kelvin-probe force microscopy: a generic model. Nanotechnology, 29(50), 505705. https://doi.org/10.1088/1361-6528/aae413 ( reposiTUm)

Fuerst, M., Unger, S., Ito, S., & Schitter, G. (2018). Wavefront measurement based feedback control for automatic alignment of a high-NA optical system. Journal of Physics: Conference Series, 1065, Article 032001. https://doi.org/10.1088/1742-6596/1065/3/032001 ( reposiTUm)

Schlarp, J., Csencsics, E., & Schitter, G. (2018). Influence of Scheimpflug condition on measurements of a scanning laser line sensor for 3D imaging. Journal of Physics: Conference Series, 1065, 142006. https://doi.org/10.1088/1742-6596/1065/14/142006 ( reposiTUm)

Schlarp, J., Csencsics, E., & Schitter, G. (2018). Optical scanning of laser line sensors for 3D imaging. Applied Optics, 57(18), 5242. https://doi.org/10.1364/ao.57.005242 ( reposiTUm)

Yoo, H. W., Druml, N., Brunner, D., Schwarzl, C., Thurner, T., Hennecke, M., & Schitter, G. (2018). MEMS-based lidar for autonomous driving. Elektrotechnik Und Informationstechnik : E & i. https://doi.org/10.1007/s00502-018-0635-2 ( reposiTUm)

Mesquida, P., Kohl, D., Andriotis, O., Thurner, P., Duer, M. J., Bansode, S., & Schitter, G. (2018). Evaluation of surface charge shift of collagen fibrils exposed to glutaraldehyde. Scientific Reports, 8, 1–7. https://doi.org/10.1038/s41598-018-28293-1 ( reposiTUm)

Kohl, D., Kerschner, C., & Schitter, G. (2017). Active damping by Q-control for fast force-distance curve measurements in atomic force microscopy. Review of Scientific Instruments, 88, 5. http://hdl.handle.net/20.500.12708/147195 ( reposiTUm)

Kohl, D., Mesquida, P., & Schitter, G. (2017). Quantitative AC - Kelvin Probe Force Microscopy. Microelectronic Engineering, 176, 28–32. http://hdl.handle.net/20.500.12708/147196 ( reposiTUm)

Riel, T., Saathof, R., Katalenic, A., Ito, S., & Schitter, G. (2017). Noise analysis and efficiency improvement of a pulse-width modulated permanent magnet synchronous motor by dynamic error budgeting. Mechatronics, 50, 225–233. https://doi.org/10.1016/j.mechatronics.2017.10.006 ( reposiTUm)

Saathof, R., Thier, M., Hainisch, R., & Schitter, G. (2017). Integrated system and control design of a one DoF nano-metrology platform. Mechatronics, 47, 88–96. http://hdl.handle.net/20.500.12708/146830 ( reposiTUm)

Csencsics, E., & Schitter, G. (2017). System Design and Control of a Resonant Fast Steering Mirror for Lissajous-based Scanning. IEEE/ASME Transactions on Mechatronics, 22(5), 1963–1972. https://doi.org/10.1109/tmech.2017.2722578 ( reposiTUm)

Ito, S., Unger, S., & Schitter, G. (2017). Vibration isolator carrying atomic force microscope’s head. Mechatronics, 44, 32–41. http://hdl.handle.net/20.500.12708/146260 ( reposiTUm)

Hofmair, M. W., Melik-Merkumians, M., Böck, M., Merdan, M., Schitter, G., & Kugi, A. (2017). Patching process optimization in an agent-controlled timber mill. Journal of Intelligent Manufacturing, 28(1), 69–84. https://doi.org/10.1007/s10845-014-0962-z ( reposiTUm)

Paris, R., Melik-Merkumians, M., & Schitter, G. (2016). Probabilistic Absolute Position Sensor Based on Objective Laser Speckles. IEEE Transactions on Instrumentation and Measurement, 65(5), 1188–1196. https://doi.org/10.1109/tim.2016.2526741 ( reposiTUm)

Yoo, H. W., Ito, S., & Schitter, G. (2016). High Speed Laser Scanning Microscopy by Iterative Learning Control of a Galvanometer Scanner. Control Engineering Practice, 50, 12–21. https://doi.org/10.1016/j.conengprac.2016.02.007 ( reposiTUm)

Nahar, S. N., Schmets, A. J. M., Schitter, G., & Scarpas, A. (2016). Quantifying the Thermomechanical Response of Bitumen from Microphase Properties. Transportation Research Record, 2574(1), 101–110. https://doi.org/10.3141/2574-11 ( reposiTUm)

Ito, S., & Schitter, G. (2016). Comparison and Classification of High-precision Actuators Based on Stiffness Influencing Vibration Isolation. IEEE/ASME Transactions on Mechatronics, 21(2), 1169–1178. https://doi.org/10.1109/tmech.2015.2478658 ( reposiTUm)

Schitter, G. (2015). Mess-, Automatisierungs- und Robotertechnik. Elektrotechnik Und Informationstechnik, 132(4–5), 189–190. https://doi.org/10.1007/s00502-015-0310-9 ( reposiTUm)

Ito, S., Steininger, J., & Schitter, G. (2015). Low-stiffness Dual Stage Actuator for Long Rage Positioning with Nanometer Resolution. Mechatronics, 29, 46–56. https://doi.org/10.1016/j.mechatronics.2015.05.007 ( reposiTUm)

Thier, M., Saathof, R., Csencsics, E., Hainisch, R., Sinn, A., & Schitter, G. (2015). Entwurf und Regelung eines Positioniersystems für robotergestützte Nanomesstechnik. AT-AUTOMATISIERUNGSTECHNIK, 63, 727–738. http://hdl.handle.net/20.500.12708/151246 ( reposiTUm)

Steininger, J., Bibl, M., Yoo, H. W., & Schitter, G. (2015). High bandwidth deflection readout for atomic force microscopes. Review of Scientific Instruments, 86. http://hdl.handle.net/20.500.12708/151312 ( reposiTUm)

Yoo, H. W., van Royen, M. E., van Cappellen, W. A., Houtsmuller, A. B., Verhaegen, M., & Schitter, G. (2014). Automated Spherical Aberration Correction in Scanning Confocal Microscopy. Review of Scientific Instruments, 85(12), 123706. https://doi.org/10.1063/1.4904370 ( reposiTUm)

Nahar, S., Schmets, A., Scarpas, A., & Schitter, G. (2014). Microstructural changes in bitumen at the onset of crack formation. European Polymer Journal, 56, 17–25. http://hdl.handle.net/20.500.12708/156562 ( reposiTUm)

Nahar, S., Mohajeri, M., Schmets, A., Scarpas, A., Martin, V. de V., & Schitter, G. (2013). First Observation of Blending-Zone Morphology at Interface of Reclaimed Asphalt Binder and Virgin Bitumen. Transportation Research Record, 2370(1), 1–9. https://doi.org/10.3141/2370-01 ( reposiTUm)

Kuiper, S., Van den Hof, P. M. J., & Schitter, G. (2013). Integrated designof the feedback controller and topography estimator for atomic force microscopy. Control Engineering Practice, 21(8), 1110–1120. https://doi.org/10.1016/j.conengprac.2013.03.006 ( reposiTUm)

Thier, M., Paris, R., Thurner, T., & Schitter, G. (2013). Low-Latency Shack Hartmann Wavefront Sensor Based on an Industrial Smart Camera. IEEE Transactions on Instrumentation and Measurement, 62(5), 1241–1249. https://doi.org/10.1109/tim.2012.2223333 ( reposiTUm)

Nahar, S. N., Schmets, A. J. M., Scarpas, A., & Schitter, G. (2013). Temperature and thermal history dependence of the microstructure in bituminous materials. European Polymer Journal, 49(8), 1964–1974. https://doi.org/10.1016/j.eurpolymj.2013.03.027 ( reposiTUm)

Oldenbeuving, R. M., Song, H., Schitter, G., Verhaegen, M., Klein, E. J., Lee, C. J., Offerhaus, H. L., & Boller, K.-J. (2013). High precision wavelength estimation method for integrated optics. Optics Express, 21(14), 11. http://hdl.handle.net/20.500.12708/155637 ( reposiTUm)

Kohl, D., Schitter, G., & Staufer, U. (2012). The potential of magnetic force microscopy for in-situ investigation of nanophase iron in lunar dust. Planetary and Space Science, 74(1), 270–275. https://doi.org/10.1016/j.pss.2012.06.013 ( reposiTUm)

Schitter, G., & Sebastian, A. (2012). Editorial Special issue on “‘Mechatronic systems for micro- and nanoscale applications.’” Mechatronics, 22(3), 239–240. https://doi.org/10.1016/j.mechatronics.2012.02.004 ( reposiTUm)

Schitter, G., Steininger, J., Heuck, F. C. A., & Staufer, U. (2012). Towards fast AFM-based nanometrology and nanomanufacturing. International Journal of Nanomanufacturing, 8(5/6), 392. https://doi.org/10.1504/ijnm.2012.051109 ( reposiTUm)

van Hulzen, J. R., Schitter, G., Van den Hof, P. M. J., & van Eijk, J. (2012). Dynamics, load balancing, and modal control of piezoelectric tube actuators. Mechatronics, 22(3), 282–294. https://doi.org/10.1016/j.mechatronics.2011.10.003 ( reposiTUm)

Kuiper, S., & Schitter, G. (2012). Model-Based Feedback Controller Design for Dual Actuated Atomic Force Microscopy Mechatronics. Mechatronics, 22(3), 327–337. https://doi.org/10.1016/j.mechatronics.2011.08.003 ( reposiTUm)

Steininger, J., Kuiper, S., Ito, S., & Schitter, G. (2012). Schnelle Rasterkraftmikroskopie durch moderne Regelungstechnik und mechatronische Systemintegration. Elektrotechnik Und Informationstechnik : E & i, 129(1), 28–33. https://doi.org/10.1007/s00502-012-0070-8 ( reposiTUm)

Paris, R., Thurner, T., Berndorfer, T., Yoo, H. W., & Schitter, G. (2012). Intelligente Kameras in der Messtechnik. Elektrotechnik Und Informationstechnik, 129(1), 34–41. https://doi.org/10.1007/s00502-012-0069-1 ( reposiTUm)

Jungmann, R., Szabo, M. E., Schitter, G., Tang, R. Y.-S., Vashishth, D., Hansma, P. K., & Thurner, P. J. (2011). Local strain and damage mapping in single trabeculae during three-point bending tests. Journal of the Mechanical Behavior of Biomedical Materials, 4(4), 11. http://hdl.handle.net/20.500.12708/161750 ( reposiTUm)

Song, H., Fraanje, R., Schitter, G., Vdovin, G., & Verhaegen, M. (2011). Controller Design for a High-Sampling-Rate Closed-Loop Adaptive Optics System with Piezo-Driven Deformable Mirror. European Journal of Control, 17(3), 290–301. https://doi.org/10.3166/ejc.17.290-301 ( reposiTUm)

Song, H., Fraanje, R., Schitter, G., Kroese, H., Vdovin, G., & Verhaegen, M. (2011). Model-based aberration correction in a closed-loop wavefront-sensor-less adaptive optics system. Virtual Journal for Biomedical Optics, 6 AUSGABE 1, 15. http://hdl.handle.net/20.500.12708/161761 ( reposiTUm)

Song, H., Fraanje, R., Schitter, G., Kroese, H., Vdovin, G., & Verhaegen, M. (2010). Model-based aberration correction in a closed-loop wavefront-sensor-less adaptive optics system. Optics Express, 18(23). http://hdl.handle.net/20.500.12708/167606 ( reposiTUm)

Kuiper, S., & Schitter, G. (2010). Active damping of a piezoelectric tube scanner using self-sening piezo actuation. Mechatronics, 20, 656–665. http://hdl.handle.net/20.500.12708/167309 ( reposiTUm)

Schitter, G. (2009). Improving the speed of AFM by mechatronic design and modern control methods. Technisches Messen, 76(5), 266–273. http://hdl.handle.net/20.500.12708/168361 ( reposiTUm)

Schitter, G., & Rost, M. J. (2009). Scanning probe microscopy at video-rate. Materials Today, 11(S1), 40–48. http://hdl.handle.net/20.500.12708/168362 ( reposiTUm)

Schitter, G., Thurner, P. J., & Hansma, P. K. (2008). Design and input-shaping control of a novel scanner for high speed atomic force microscopy. Mechatronics, 18, 282–288. http://hdl.handle.net/20.500.12708/171426 ( reposiTUm)

Kindt, J. H., Thurner, P. J., Lauer, M. E., Bosma, B. L., Schitter, G., Fantner, G. E., Izumi, M., Weaver, J., Morse, D. E., & Hansma, P. K. (2007). In situ Observation of Fluoride-ion Induced Apatite-Collagen Detachment on Bone Fracture Surfaces by Atomic Force Microscopy. Nanotechnology, 18(3), 1–8. http://hdl.handle.net/20.500.12708/171427 ( reposiTUm)

Schitter, G., Åström, K. J., DeMartini, B. E., Thurner, P. J., Turner, K. L., & Hansma, P. K. (2007). Design and modeling of a high-speed AFM-scanner. IEEE Transactions on Control Systems Technology, 15(5), 906–915. http://hdl.handle.net/20.500.12708/171428 ( reposiTUm)

Hansma, P. K., Schitter, G., Fantner, G. E., & Prater, C. (2006). High-speed atomic force microscopy. Science, 314, 601–602. http://hdl.handle.net/20.500.12708/174288 ( reposiTUm)

Thurner, P. J., Erickson, B., Schriock, Z., Jungmann, R., Weaver, J., Fantner, G. E., Schitter, G., Morse, D. E., & Hansma, P. K. (2006). High-Speed photography of compressed human trabecular bone correlates whitening to microscopic damage. Engineering Fracture Mechanics, 74(12), 1928–1941. http://hdl.handle.net/20.500.12708/174291 ( reposiTUm)

Fantner, G. E., Rabinovych, O., Schitter, G., Thurner, P. J., Kindt, J. H., Finch, M. M., Weaver, J., Golde, L. S., Morse, D. E., Rangelow, I. W., & Hansma, P. K. (2006). Hierarchical interconnections in the nano-composite material Bone: Fibrilar Cross-Links resist fracture on several length scales. Composites Science and Technology, 66, 1202–1208. http://hdl.handle.net/20.500.12708/174293 ( reposiTUm)

Thurner, P. J., Erickson, B., Schriock, Z., Langan, J., Scott, J. S., Zhao, M., Weaver, J., Schitter, G., Morse, D. E., & Hansma, P. K. (2006). High-Speed photography of the development of microdamage in trabelucar bone during compression. Journal of Materials Research, 21(5), 1093–1100. http://hdl.handle.net/20.500.12708/174290 ( reposiTUm)

Fantner, G. E., Oroudjev, E., Schitter, G., Golde, L. S., Thurner, P. J., Finch, M. M., Turner, P., Morse, D. E., Hansma, H., & Hansma, P. K. (2006). Sacrificial Bonds and Hidden Length: Unraveling Molecular Mesostructures in Tough Materials. Biophysical Journal, 90, 1411–1418. http://hdl.handle.net/20.500.12708/174292 ( reposiTUm)

Fantner, G. E., Schitter, G., Kindt, J. H., Ivanov, T., Ivanova, K., Patel, R., Holten-Andersen, N., Adams, J., Thurner, P. J., Rangelow, I. W., & Hansma, P. K. (2006). Components for high-speed atomic force microscopy. Ultramicroscopy, 106, 881–887. http://hdl.handle.net/20.500.12708/174289 ( reposiTUm)

Fantner, G. E., Hegarty, P., Kindt, J. H., Schitter, G., Cidade, G., & Hansma, P. K. (2005). Data acquisition system for high-speed atomic force microscopy. Review of Scientific Instruments, 76, 1–4. http://hdl.handle.net/20.500.12708/174294 ( reposiTUm)

Schitter, G., Stark, R., & Stemmer, A. (2004). Fast contact-mode atomic force microscopy on biological specimen by model-based control. Ultramicroscopy, 100, 253–257. http://hdl.handle.net/20.500.12708/175536 ( reposiTUm)

Schitter, G., & Stemmer, A. (2004). Identification and open-loop tracking control of a piezoelectric tube scanner for high-speed scanning probe microscopy. IEEE Transactions on Control Systems Technology, 12(3), 449–454. http://hdl.handle.net/20.500.12708/175538 ( reposiTUm)

Stark, R., Schitter, G., & Stemmer, A. (2004). Velocity dependend friction laws in contact mode atomic-force microscopy. Ultramicroscopy, 100, 309–317. http://hdl.handle.net/20.500.12708/175537 ( reposiTUm)

Schitter, G., Scarpas, A., & Allgöwer, F. (2004). Robust two-degree-of-freedom control of an atomic force microscope. Asian Journal of Control, 6(2), 156–163. http://hdl.handle.net/20.500.12708/175535 ( reposiTUm)

Stark, R., Schitter, G., Stark, M., Guckenberger, R., & Stemmer, A. (2004). State space model of freely vibrating and surface-coupled cantilever dynamics in atomic force microscopy. Physical Review B, 69. http://hdl.handle.net/20.500.12708/175539 ( reposiTUm)

Pernstich, K. P., Haas, S., Oberhoff, D., Goldmann, C., Gundlach, D. J., Batlogg, B., Rashid, A. N., & Schitter, G. (2004). Threshold voltage shift in organic FETs by dipole-monolayers on the gate insulator. Journal of Applied Physics, 96(11), 6431–6438. http://hdl.handle.net/20.500.12708/175534 ( reposiTUm)

Schitter, G., Allgöwer, F., & Stemmer, A. (2004). A new control strategy for high-speed atomic force microscopy. Nanotechnology, 15, 108–114. http://hdl.handle.net/20.500.12708/175540 ( reposiTUm)

Schitter, G., & Stemmer, A. (2003). Model-based signal conditioning for high-speed atomic force and friction force microscopy. Microelectronic Engineering, 67–68, 938–944. http://hdl.handle.net/20.500.12708/175542 ( reposiTUm)

Stark, R., Schitter, G., & Stemmer, A. (2003). Tuning the interaction forces in tapping mode atomic-force microscopy. Physical Review B, 68. http://hdl.handle.net/20.500.12708/175541 ( reposiTUm)

Haefliger, D., Muhenchinger, M., Schitter, G., & Stemmer, A. (2003). An integrated piezo-acoustic shear-force distance sensor with nanometer resolution for a micropipette tool. Sensors and Actuators A: Physical, 103, 353–358. http://hdl.handle.net/20.500.12708/175543 ( reposiTUm)

Schitter, G., & Stemmer, A. (2002). Fast closed loop control of piezoelectric transducers. JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B, 20(1), 350–352. http://hdl.handle.net/20.500.12708/175546 ( reposiTUm)

Schitter, G., Stark, R., & Stemmer, A. (2002). Sensors for closed-loop piezo control: strain gauges versus optical sensors. Measurement Science and Technology, 13(4), 47–48. http://hdl.handle.net/20.500.12708/175545 ( reposiTUm)

Schitter, G., & Stemmer, A. (2002). Eliminating mechanical perturbations in scanning probe microscopy. Nanotechnology, 13, 663–665. http://hdl.handle.net/20.500.12708/175544 ( reposiTUm)

Schitter, G., Menold, P.-, Knapp, H., Allgöwer, F., & Stemmer, A. (2001). High performance feedback for fast scanning atomic force microscopes. Review of Scientific Instruments, 72(8), 3320–3327. http://hdl.handle.net/20.500.12708/175547 ( reposiTUm)

Pechhacker, A., Csencsics, E., & Schitter, G. (2025). Enhanced Energy Efficiency of Hybrid Reluctance Actuators by Bias Flux Adaptation. In 2025 IEEE International Conference on Mechatronics (ICM) (pp. 1–6). https://doi.org/10.1109/ICM62621.2025.10934938 ( reposiTUm)

Pechgraber, D., Csencsics, E., & Schitter, G. (2025). Observer-Based Disturbance Suppression in a 3-DoF Positioning System for High-Precision 3D Inline Metrology. In 2025 IEEE International Conference on Mechatronics (ICM) (pp. 1–6). https://doi.org/10.1109/ICM62621.2025.10934889 ( reposiTUm)

Hager, S., Csencsics, E., Yoo, H. W., & Schitter, G. (2024). Reducing the uncertainty of laser straightness measurements via local saturation of imaging sensors. In 2024 IEEE International Conference on Advanced Intelligent Mechatronics (AIM) (pp. 1567–1572). https://doi.org/10.1109/AIM55361.2024.10637144 ( reposiTUm)

Brunner, D., Yoo, H. W., & Schitter, G. (2024). Precise Synchronization Control of Parametrically Driven Resonant MEMS Mirrors for Lissajous Scanning with a Fixed Frequency Ratio. In 2024 IEEE International Conference on Advanced Intelligent Mechatronics (AIM) (pp. 467–473). IEEE. https://doi.org/10.1109/AIM55361.2024.10636949 ( reposiTUm)

Friedl, B., Pechhacker, A., Csencsics, E. K., & Schitter, G. (2024). Design and Control of a Table-top Vibration Isolation System With Zero-power Gravity Compensation. In 2024 IEEE International Conference on Advanced Intelligent Mechatronics (AIM) (pp. 835–840). https://doi.org/10.1109/AIM55361.2024.10637066 ( reposiTUm)

Haider, C., Csencsics, E., & Schitter, G. (2024). Analyzing the dynamic performance of hybrid reluctance actuators for feedback control. In 2024 IEEE International Conference on Advanced Intelligent Mechatronics (AIM) (pp. 657–662). https://doi.org/10.1109/AIM55361.2024.10637221 ( reposiTUm)

Laimer, M., Wertjanz, D., Gsellmann, P., Schitter, G., & Csencsics, E. (2024). Enabling feedback position control of an industrial robot based on external sensor signals for dual-stage actuation. In 2024 IEEE International Conference on Advanced Intelligent Mechatronics (AIM) (pp. 1252–1257). https://doi.org/10.1109/AIM55361.2024.10637010 ( reposiTUm)

Haider, C., Csencsics, E., & Schitter, G. (2024). Frequency-dependency of force dynamics in hybrid reluctance actuators. In 2024 IEEE International Conference on Advanced Intelligent Mechatronics (AIM) (pp. 663–667). https://doi.org/10.1109/AIM55361.2024.10637132 ( reposiTUm)

Cong, B., Yoo, H. W., Pechgraber, D., & Schitter, G. (2024). Cross-scan Error Evaluation of Large Size Polygon Mirror Based Laser Scanning System for Industrial 3D Printing. In 2024 IEEE International Conference on Advanced Intelligent Mechatronics (AIM) (pp. 290–295). https://doi.org/10.1109/AIM55361.2024.10636950 ( reposiTUm)

Reier, F., Yoo, H. W., Brunner, D., & Schitter, G. (2024). Direct Phase Correction in Phase Locked Loop for Robust Lissajous Scanning of Resonant MEMS Mirrors. In 2024 IEEE International Conference on Advanced Intelligent Mechatronics (AIM) (pp. 243–248). https://doi.org/10.1109/AIM55361.2024.10637040 ( reposiTUm)

Poik, M., Hackl, T., Di Martino, S., Dang, J., & Schitter, G. (2024). Identification of Parasitic Capacitances in Integrated Circuits by Contactless RF Voltage Sensing. In 2024 54th European Microwave Conference (EuMC) (pp. 248–251). https://doi.org/10.23919/EuMC61614.2024.10732373 ( reposiTUm)

Nalbach, M., Fuchs, M., Motoi, N., Rufin, M., Andriotis, O., Schitter, G., & Thurner, P. J. (2024). Mechanical behavior of individual collagen fibrils in force-controlled mechanical tests. In EMI 2024 IC - ASCE Engineering Mechanics Institute 2024 International Conference : Program & Book of Abstracts (pp. 88–88). ( reposiTUm)

Pechhacker, A., Csencsics, E., & Schitter, G. (2024). Integrator state correction for improved positioning performance of adaptive zero-power MAGLEV systems. In IECON 2024 - 50th Annual Conference of the IEEE Industrial Electronics Society (pp. 1–6). IEEE. https://doi.org/10.1109/IECON55916.2024.10905586 ( reposiTUm)

Ojdanic, D., Naverschnigg, C., Sinn, A., & Schitter, G. (2024). Algorithm evaluation for parallel detection and tracking of UAVs. In P. Schelkens & T. Kozacki (Eds.), Optics, Photonics, and Digital Technologies for Imaging Applications VIII. https://doi.org/10.1117/12.3017037 ( reposiTUm)

Nalbach, M., Fuchs, M., Motoi, N., Rufin, M., Andriotis, O., Schitter, G., & Thurner, P. (2024). Mechanical behavior of individual collagen fibrils in force-controlled mechanical test. In EMI 2024 IC - ASCE Engineering Mechanics Institute 2024 International Conference : Program & Book of Abstracts (pp. 88–88). http://hdl.handle.net/20.500.12708/215855 ( reposiTUm)

Sinn, A., Kreuzmair, F., Schwaer, C., Prager, P., & Schitter, G. (2024). Characterization of an active secondary mirror positioning system for a small telescope. In R. Navarro & R. Jedamzik (Eds.), Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation VI (p. 175). https://doi.org/10.1117/12.3021247 ( reposiTUm)

Pechgraber, D., Csencsics, E., & Schitter, G. (2024). Reducing the uncertainty in a switched amplifier-driven positioning system to the sub-nanometer level. In 2024 IEEE International Conference on Advanced Intelligent Mechatronics (AIM) (pp. 44–50). https://doi.org/10.1109/AIM55361.2024.10637163 ( reposiTUm)

Ojdanic, D., Paternoster, N., Naverschnigg, C., Sinn, A., & Schitter, G. (2024). Evaluation of the required optical resolution for deep learning-based long-range UAV detection. In Dr. M. Alam & V. Asari (Eds.), Proceedings Volume 13040, Pattern Recognition and Prediction XXXV (p. 14). https://doi.org/10.1117/12.3013251 ( reposiTUm)

Zech, C., Römhild, J., Gsellmann, P., Melik-Merkumians, M., & Schitter, G. (2023). Sensorless External Torque Sensing for Collision Detection in Collaborative Robots. In IECON 2023- 49th Annual Conference of the IEEE Industrial Electronics Society (pp. 1–6). https://doi.org/10.1109/IECON51785.2023.10312606 ( reposiTUm)

Hackl, T., Poik, M., & Schitter, G. (2023). Quantitative Surface Potential Measurements by AC Electrostatic Force Microscopy. In 2023 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) (pp. 1–5). https://doi.org/10.1109/I2MTC53148.2023.10176066 ( reposiTUm)

Wertjanz, D., Kern, T., Csencsics, E. K., & Schitter, G. (2023). Feedforward compensation of scan-induced disturbances for a high-precision robotic 3D measurement system. In 2023 American Control Conference (ACC) (pp. 679–684). https://doi.org/10.23919/ACC55779.2023.10156562 ( reposiTUm)

Buchner, C., Gsellmann, P., Melik-Merkumians, M., & Schitter, G. (2023). Eye-In-Hand Pose Estimation of Industrial Robots. In IECON 2023- 49th Annual Conference of the IEEE Industrial Electronics Society. 49th Annual Conference of the IEEE Industrial Electronics Society (IECON 2023), Singapur, Singapore. https://doi.org/10.1109/IECON51785.2023.10312053 ( reposiTUm)

Wertjanz, D., Kern, T., Csencsics, E. K., & Schitter, G. (2023). Robot-based measurement system for double-sided inspection of optical components. In I2MTC 2023 Conference Proceedings (pp. 1–6). https://doi.org/10.1109/I2MTC53148.2023.10175937 ( reposiTUm)

Pechgraber, D., Csencsics, E. K., Yoo, H. W., & Schitter, G. (2023). Controlling the Amplitude of a Resonant Rotational Reluctance Actuated Scanning Mirror System. In 22nd IFAC World Congress. Yokohama, Japan, July 9-14, 2023. Proceedings (pp. 6043–6049). Elsevier. https://doi.org/10.1016/j.ifacol.2023.10.659 ( reposiTUm)

Pechhacker, A., Wertjanz, D., Csencsics, E., & Schitter, G. (2023). Model-based flux control of an electropermanent magnet for adaptive zero power gravity compensation. In 22nd IFAC World Congress. Yokohama, Japan, July 9-14, 2023. Proceedings (pp. 5352–5357). Elsevier. https://doi.org/10.1016/j.ifacol.2023.10.180 ( reposiTUm)

Hackl, T., Mesquida, P., Poik, M., & Schitter, G. (2023). Ac kelvin probe force microscopy enables nanoscale surface charge mapping in water. In Proceedings of the Microscience Microscopy Congress 2023 incorporating EMAG 2023. Microscience Microscopy Congress 2023, Manchester, United Kingdom of Great Britain and Northern Ireland (the). https://doi.org/10.22443/rms.mmc2023.166 ( reposiTUm)

Gsellmann, P., Buchner, C., Egretzberger, K., Melik-Merkumians, M., & Schitter, G. (2023). Depth-data-based object cluster tracking and velocity estimation in robot workspace. In Proceedings of IECON 2023 – 49th Annual Conference of the IEEE Industrial Electronics Society. IECON 2023 – 49th Annual Conference of the IEEE Industrial Electronics Society, Singapore, Singapore. https://doi.org/10.1109/IECON51785.2023.10312361 ( reposiTUm)

Ojdanic, D., Naverschnigg, C., Sinn, A., & Schitter, G. (2023). Deep learning-based long-distance optical UAV detection: color versus grayscale. In Dr. M. Alam & V. Asari (Eds.), Proceedings Volume 12527, Pattern Recognition and Tracking XXXIV. https://doi.org/10.1117/12.2663318 ( reposiTUm)

Poik, M., Hackl, T., Di Martino, S., Schober, M., Dang, J., & Schitter, G. (2023). Analysis of Cross-Talk Induced Measurement Errors in Model-Based RF Voltage Sensing. In 2023 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) (pp. 1–6). IEEE. https://doi.org/10.1109/I2MTC53148.2023.10175924 ( reposiTUm)

Macho, M., Yoo, H. W., Schroedter, R., & Schitter, G. (2023). Iterative Learning Control for Quasi-Static MEMS Mirror with Switching Operation. In 2023 IEEE 36th International Conference on Micro Electro Mechanical Systems (MEMS) (pp. 538–541). IEEE. https://doi.org/10.1109/MEMS49605.2023.10052637 ( reposiTUm)

Wertjanz, D., Kern, T., Csencsics, E., & Schitter, G. (2023). Residual error correction for reducing the uncertainty of a sample-tracking robotic 3D measurement system. In H. Ishii, Y. Ebihara, J. Imura, & M. Yamakita (Eds.), 22nd IFAC World Congress (pp. 4418–4423). Elsevier. https://doi.org/10.1016/j.ifacol.2023.10.1829 ( reposiTUm)

Csencsics, E. K., Doblinger, G., & Schitter, G. (2023). A novel magnetically levitated tip/tilt motion platform. In H. Ishii, Y. Ebihara, J. Imura, & M. Yamakita (Eds.), 22nd IFAC World Congress (pp. 3379–3385). Elsevier. https://doi.org/10.1016/j.ifacol.2023.10.1485 ( reposiTUm)

Berlakovich, N., Fürst, M. E., Csencsics, E. K., & Schitter, G. (2022). Reconstruction of optical wavefronts with parallel registration algorithms. In Proceedings Volume 12221 - SPIE Optical Manufacturing and Testing XIV. SPIE Optics + Photonics 2022, United States of America (the). SPIE. ( reposiTUm)

Gsellmann, P., Natter, D., & Schitter, G. (2022). Collision Avoidance for a SCARA Robot on Construction Sites. In Proceedings of 2022 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM) (pp. 508–513). Institute of Electrical and Electronic Engineers, Inc (IEEE). https://doi.org/10.34726/3562 ( reposiTUm)

Wertjanz, D., Berlakovich, N., Csencsics, E., & Schitter, G. (2022). Range extension of a scanning confocal chromatic sensor for precise robotic inline 3D measurements. In Proceedings of the IEEE International Instrumentation and Measurement Technology Conference (I2MTC 2020) (pp. 1–6). https://doi.org/10.1109/I2MTC48687.2022.9806615 ( reposiTUm)

Binder, S., Zandrini, T., Yoo, H. W., Schitter, G., & Ovsianikov, A. (2022). Development and characterization of a resonant scanner based 2-photon polymerization printer. In 9th European Conference on Applications of Femtosecond Lasers in Materials Science - FemtoMat 2022 (p. 49). ( reposiTUm)

Wertjanz, D., Kern, T., Pechhacker, A., Csencsics, E., & Schitter, G. (2022). Robotic precision 3D measurements in vibration-prone environments enabled by active six DoF sample-tracking. In Proceedings of 2022 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM) (pp. 1441–1446). https://doi.org/10.1109/AIM52237.2022.9863321 ( reposiTUm)

Hackl, T., Poik, M., & Schitter, G. (2022). DC-Bias-free Surface Potential Measurements by Heterodyne AC Kelvin Probe Force Microscopy. In Proceedings of 2022 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) (pp. 1–5). https://doi.org/10.1109/I2MTC48687.2022.9806676 ( reposiTUm)

Sinn, A., Schachner, S., Riel, T., Schwär, C., & Schitter, G. (2022). Feed-forward vibration compensation for small telescopes. In R. Navarro & R. GEYL (Eds.), Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation V (pp. 12188-123-1-12188-123–127). SPIE. https://doi.org/10.34726/2921 ( reposiTUm)

Poik, M., Mayr, M., Hackl, T., & Schitter, G. (2022). Mechatronic Demodulation of Self-Sensing Cantilever for DC-bias free AFM Imaging in Liquid. In 2022 IEEE 22nd International Conference on Nanotechnology (NANO) (pp. 35–38). https://doi.org/10.1109/NANO54668.2022.9928744 ( reposiTUm)

Cong, B., Schlarp, J., & Schitter, G. (2022). Iterative Learning Control for the Active Error Correction of Polygon Mirror Based Laser Scanning. In Proceedings of 2022 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM) (pp. 522–527). https://doi.org/10.1109/AIM52237.2022.9863305 ( reposiTUm)

Poik, M., Mayr, M., Hackl, T., & Schitter, G. (2022). Mechatronic Demodulation for Dynamic Atomic Force Microscopy Measurement Modes. In I2MTC 2022 conference proceedings : 2022 I2MTC - International Instrumentation and Measurement Technology Conference, (pp. 1–6). https://doi.org/10.1109/I2MTC48687.2022.9806639 ( reposiTUm)

Schlarp, J., Csencsics, E., & Schitter, G. (2022). Analyzing error sources and error propagation in an optical scanning 3D triangulation sensor system. In Proc. SPIE 12222, Optical System Alignment, Tolerancing, and Verification XIV (p. 18). https://doi.org/10.1117/12.2632155 ( reposiTUm)

Schlarp, J., Klemen, L., Csencsics, E., & Schitter, G. (2022). Improving the Repeatability of a Color Sensor by Integrating an FSM for Scanning-based Areal Measurements. In Proceedings 2022 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM). 2022 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM), Japan. https://doi.org/10.1109/AIM52237.2022.9863294 ( reposiTUm)

Hackl, T., Poik, M., & Schitter, G. (2022). Influence of Imaging Parameters on AFM Surface Potential Measurements in Aqueous Solutions. In 2022 IEEE 22nd International Conference on Nanotechnology (NANO) (pp. 39–42). https://doi.org/10.1109/NANO54668.2022.9928605 ( reposiTUm)

Resetarits, M., Melik-Merkumians, M., & Schitter, G. (2022). Controlling concurrent events in IEC 61499 based systems on FPGAs. In 2022 IEEE 27th International Conference on Emerging Technologies and Factory Automation (ETFA 2022). IEEE 27th International Conference on Emerging Technologies and Factory Automation (ETFA), Stuttgart, Germany. Institute of Electrical and Electronic Engineers, Inc (IEEE). https://doi.org/10.34726/3563 ( reposiTUm)

Hackl, T., Poik, M., & Schitter, G. (2022). Electrostatic Actuation of AFM Cantilevers in Aqueous Solutions. In Proceedings of 2022 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM) (pp. 1538–1542). https://doi.org/10.1109/AIM52237.2022.9863317 ( reposiTUm)

Fürst, M. E., Berlakovich, N., Csencsics, E., & Schitter, G. (2022). Scanning Shack-Hartmann sensor for wavefront measurements on freeform optics. In Optical Manufacturing and Testing XIV. SPIE Optical Engineering + Applications, United States of America (the). https://doi.org/10.1117/12.2628328 ( reposiTUm)

Csencsics, E., Schlarp, J., Glaser, T., Wolf, T., & Schitter, G. (2022). Simulation and Reduction of Speckle-induced Uncertainty in Laser Triangulation Sensors. In Proceedings of 2022 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) (pp. 1–6). https://doi.org/10.1109/I2MTC48687.2022.9806610 ( reposiTUm)

Schwaer, C., Sinn, A., & Schitter, G. (2022). Development of active optics for thin meniscus mirrors in 1-meter-class telescopes. In R. Navarro & R. GEYL (Eds.), Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation V. SPIE. https://doi.org/10.1117/12.2625986 ( reposiTUm)

Sinn, A., Schwär, C., Kremsner, P., & Schitter, G. (2022). High-bandwidth tip-tilt compensation for small telescope systems. In L. Schreiber, D. Schmidt, & E. Vernet (Eds.), Adaptive Optics Systems VIII (pp. 1218584-1-1218584–1218587). SPIE. https://doi.org/10.34726/3001 ( reposiTUm)

Schwaer, C., Stefanek, D., Sinn, A., & Schitter, G. (2022). Integrated Force Sensor based on Optical Distance Measurement for a Modular Actuator used in Active Optics. In Proceedings of 2022 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM) (pp. 496–501). https://doi.org/10.1109/AIM52237.2022.9863267 ( reposiTUm)

Csencsics, E., Wolf, T., & Schitter, G. (2021). Speckle simulation tool for the design of laser-based displacement sensors. In Optical Measurement Systems for Industrial Inspection XII. SPIE Optical Metrology Conference 2021, Unknown. SPIE. https://doi.org/10.1117/12.2592596 ( reposiTUm)

Burgstaller, I., Ito, S., Fujimoto, H., & Schitter, G. (2021). Development of Reluctance Actuator for High-Precision Positioning and Scanning Motion. In 2021 IEEE International Conference on Mechatronics (ICM). IEEE International Conference on Mechatronics 2021, Kashiwa, Japan. https://doi.org/10.1109/icm46511.2021.9385649 ( reposiTUm)

Ojdanic, D., Sinn, A., Schwaer, C., & Schitter, G. (2021). UAV Detection and Tracking with a Robotic Telescope System. In Proceedings of the Advanced Intelligent Mechatronics Conference 2020. 2021 IEEE International Conference on Advanced Intelligent Mechatronics (AIM), Unknown. http://hdl.handle.net/20.500.12708/77557 ( reposiTUm)

Merkumians, M. M., Gsellmann, P., & Schitter, G. (2021). Hierarchization and Integration of IEC 61131-3 and IEC 61499 for Enhanced Reusability. In 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA ). 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), Västerås, Sweden, Sweden. Ieee Ies. https://doi.org/10.1109/etfa45728.2021.9613226 ( reposiTUm)

Gsellmann, P., Melik-Merkumians, M., & Schitter, G. (2021). Robot Guidance utilizing 3D Sensor Data. In Proceedings of the Advanced Intelligent Mechatronics Conference 2020. 2021 IEEE International Conference on Advanced Intelligent Mechatronics (AIM), Unknown. http://hdl.handle.net/20.500.12708/77554 ( reposiTUm)

Hackl, T., Poik, M., & Schitter, G. (2021). Automated Probe-Sample Alignment for the Evaluation of Integrated Circuits. In Proceedings of the Advanced Intelligent Mechatronics Conference 2020. 2021 IEEE International Conference on Advanced Intelligent Mechatronics (AIM), Unknown. http://hdl.handle.net/20.500.12708/77555 ( reposiTUm)

Schlarp, J., Scherzer, T., Cong, B., & Schitter, G. (2021). Development of a polygon mirror based SLA 3D-printer. In Proceedings of the Advanced Intelligent Mechatronics Conference 2020. 2021 IEEE International Conference on Advanced Intelligent Mechatronics (AIM), Unknown. http://hdl.handle.net/20.500.12708/77556 ( reposiTUm)

Wertjanz, D., Csencsics, E., Schlarp, J., & Schitter, G. (2020). Design and control of a MAGLEV platform for positioning in arbitrary orientations. In 2020 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM). 2020 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM), Boston, United States of America (the). https://doi.org/10.1109/aim43001.2020.9158898 ( reposiTUm)

Wertjanz, D., Csencsics, E., & Schitter, G. (2020). An efficient control transition scheme between stabilization and tracking task of a MAGLEV platform enabling active vibration compensation. In 2020 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM). 2020 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM), Boston, United States of America (the). https://doi.org/10.1109/aim43001.2020.9158924 ( reposiTUm)

Fuerst, M. E., Berlakovich, N., Csencsics, E., & Schitter, G. (2020). Self-Aligning Scanning Shack-Hartmann Sensor for Automatic Wavefront Measurements of High-NA Optics. In 2020 IEEE International Instrumentation and Measurement Technology Conference (I2MTC). IEEE International Instrumentation and Measurement Technology Conference Proceedings I2MTC (2020), Dubrovnik, Croatia. https://doi.org/10.1109/i2mtc43012.2020.9128499 ( reposiTUm)

Motoi, N., Nalbach, M., Ito, S., Thurner, P. J., & Schitter, G. (2020). Adaptive Control Method Based on Recursive Least Square Method by Piezoelectric Actuator for Pulling Fibril with Parameter Variation. In IECON 2020 The 46th Annual Conference of the IEEE Industrial Electronics Society. 46th Annual Conference of the IEEE Industrial Electronics Society (IECON 2020), Singapore, Singapore. IEEE. https://doi.org/10.1109/iecon43393.2020.9254330 ( reposiTUm)

Poik, M., Kohl, D., Mayr, M., Kerschner, C., & Schitter, G. (2020). Efficient Demodulation for Measuring the Amplitude of Mechanical Oscillations. In 2020 IEEE International Instrumentation and Measurement Technology Conference (I2MTC). IEEE International Instrumentation and Measurement Technology Conference Proceedings I2MTC (2020), Dubrovnik, Croatia. https://doi.org/10.1109/i2mtc43012.2020.9129045 ( reposiTUm)

Ito, S., Woong Yoo, H., & Schitter, G. (2020). Noise Reduction of Learning Control for Periodic Motion of Galvanometer Scanner. In IFAC-PapersOnLine (pp. 8401–8406). https://doi.org/10.1016/j.ifacol.2020.12.1582 ( reposiTUm)

Galffy, A., Schlarp, J., Frank, D., Mühlbacher, R., & Schitter, G. (2020). Turbulence prediction for aircraft by means of high-dynamic differential pressure measurements. In Proceedings of the Aerospace Europe Conference AEC2020. Aerospace Europe Conference AEC2020, Bordeaux, France. http://hdl.handle.net/20.500.12708/77236 ( reposiTUm)

Yoo, H. W., & Schitter, G. (2020). Complex Valued State Space Model for Weakly Nonlinear Duffing Oscillator with Noncollocated External Disturbance. In IFAC-PapersOnLine (pp. 8546–8552). https://doi.org/10.1016/j.ifacol.2020.12.571 ( reposiTUm)

Csencsics, E., & Schitter, G. (2020). Dynamic performance estimation: A design tool for mechatronic scanners. In IFAC-PapersOnLine (pp. 8407–8412). https://doi.org/10.1016/j.ifacol.2020.12.1579 ( reposiTUm)

Schroedter, R., Yoo, H. W., Brunner, D., & Schitter, G. (2020). Capacitive Charge-based Self-Sensing for Resonant Electrostatic MEMS mirrors. In IFAC-PapersOnLine (pp. 8553–8558). https://doi.org/10.1016/j.ifacol.2020.12.568 ( reposiTUm)

Schroedter, R., Csencsics, E., & Schitter, G. (2020). Towards the Analogy of Electrostatic and Electromagnetic Transducers. In IFAC-PapersOnLine (pp. 8941–8946). https://doi.org/10.1016/j.ifacol.2020.12.1423 ( reposiTUm)

Schlarp, J., Csencsics, E., & Schitter, G. (2020). Optically scanned laser line sensor. In 2020 IEEE International Instrumentation and Measurement Technology Conference (I2MTC). IEEE International Instrumentation and Measurement Technology Conference (I2MTC 2020), Dubrovnik, Croatia. https://doi.org/10.1109/i2mtc43012.2020.9129038 ( reposiTUm)

Ito, S., Pirker, S., & Schitter, G. (2020). Integrated PWM-driven motion system for high positioning resolution and low energy dissipation. In Proceedings of the IEEJ International Workshop on Sensing, Actuation, Motion Control and Optimization (SAMCON) (p. 6). http://hdl.handle.net/20.500.12708/77057 ( reposiTUm)

Gsellmann, P., Melik-Merkumians, M., Hurban, M., & Schitter, G. (2020). Heuristic Path Planning Approach for a Granular-fill Insulation Distributing Robot. In IFAC-PapersOnLine (pp. 9956–9961). https://doi.org/10.1016/j.ifacol.2020.12.2711 ( reposiTUm)

Schlarp, J., Csencsics, E., Doblinger, G., & Schitter, G. (2020). Design of a Mechanical Tunable Resonant Fast Steering Mirror. In 2020 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM). 2020 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM), Boston, United States of America (the). https://doi.org/10.1109/aim43001.2020.9159032 ( reposiTUm)

Ito, S., Lindner, B., & Schitter, G. (2019). Sample-tracking Vibration Isolation with Hybrid Reluctance Actuators for Inline Metrology. In IFAC-PapersOnLine (pp. 537–542). IFAC-PapersOnLine/Elsevier. https://doi.org/10.1016/j.ifacol.2019.11.731 ( reposiTUm)

Cigarini, F., Ito, S., Konig, J., Sinn, A., & Schitter, G. (2019). Compensation of Hysteresis in Hybrid Reluctance Actuator for High-Precision Motion. In IFAC-PapersOnLine (pp. 477–482). IFAC-PapersOnLine/Elsevier. https://doi.org/10.1016/j.ifacol.2019.11.721 ( reposiTUm)

Brunner, D., Yoo, H. W., & Schitter, G. (2019). Digital Asynchronous Phase Locked Loop for Precision Control of MOEMS Scanning Mirror. In IFAC-PapersOnLine (pp. 43–48). IFAC-PapersOnLine/Elsevier. https://doi.org/10.1016/j.ifacol.2019.11.647 ( reposiTUm)

Schwaer, C., Sinn, A., & Schitter, G. (2019). Mechatronic Approach towards Lightweight Mirrors with Active Optics for Telescope Systems. In IFAC-PapersOnLine (pp. 7–12). IFAC-PapersOnLine/Elsevier. https://doi.org/10.1016/j.ifacol.2019.11.641 ( reposiTUm)

Fuerst, M. E., & Schitter, G. (2019). Scanning Wavefront Sensor for Measurement of Highly Divergent Wavefronts. In IFAC-PapersOnLine (pp. 25–30). IFAC-PapersOnLine/Elsevier. https://doi.org/10.1016/j.ifacol.2019.11.644 ( reposiTUm)

Schlarp, J., Csencsics, E., & Schitter, G. (2019). Scanning laser triangulation sensor geometry maintaining imaging condition. In IFAC-PapersOnLine (pp. 301–306). IFAC-PapersOnLine/Elsevier. https://doi.org/10.1016/j.ifacol.2019.11.691 ( reposiTUm)

Poik, M., Kohl, D., & Schitter, G. (2019). Similarity-based Feedback Control with Reduced Capacitive Load for Linear Operation of Piezoelectric Actuators. In IFAC-PapersOnLine (pp. 585–590). IFAC-PapersOnLine/Elsevier. https://doi.org/10.1016/j.ifacol.2019.11.739 ( reposiTUm)

Yoo, H. W., Kerschner, C. J., Ito, S., & Schitter, G. (2019). Iterative Learning Control for Laser Scanning based Micro 3D Printing. In IFAC-PapersOnLine (pp. 169–174). IFAC-PapersOnLine/Elsevier. https://doi.org/10.1016/j.ifacol.2019.11.669 ( reposiTUm)

Yoo, H. W., Brunner, D., Thurner, T., & Schitter, G. (2019). MEMS Test Bench and its Uncertainty Analysis for Evaluation of MEMS Mirrors. In IFAC-PapersOnLine (pp. 49–54). IFAC-PapersOnLine/Elsevier. https://doi.org/10.1016/j.ifacol.2019.11.648 ( reposiTUm)

Yoo, H. W., Brunner, D., Thurner, T., & Schitter, G. (2019). Compensation for Temperature Dependency of 1D Position Sensitive Detector. In Advances in Display Technologies IX (p. 10). SPIE. http://hdl.handle.net/20.500.12708/76808 ( reposiTUm)

Hurban, M., Melik-Merkumians, M., Steinegger, T., Bibl, M., Gsellmann, P., & Schitter, G. (2019). Automated Tripod Leveling and Parameter Estimation for a Granular-fill Insulation Distributing Robot. In IFAC-PapersOnLine (pp. 223–228). IFAC-PapersOnLine/Elsevier. https://doi.org/10.1016/j.ifacol.2019.11.678 ( reposiTUm)

Brunner, D., Yoo, H. W., Thurner, T., & Schitter, G. (2019). Data based Modelling and Identification of Nonlinear SDOF MOEMS Mirror. In MOEMS and Miniaturized Systems XVIII (p. 11). SPIE. http://hdl.handle.net/20.500.12708/76760 ( reposiTUm)

Sinn, A., Riel, T., Kremsner, P., & Schitter, G. (2019). Analysis of tip-tilt compensation for reflective free-space optical satellite communication. In Free-Space Laser Communications XXXI (p. 12). SPIE. http://hdl.handle.net/20.500.12708/76763 ( reposiTUm)

Galffy, A., Car, F., & Schitter, G. (2019). Calibration and flight test of a 3D printed 5-hole probe for high-dynamic wind measurements for UAV. In 2019 Workshop on Research, Education and Development of Unmanned Aerial Systems (RED UAS). International Workshop on Research, Education and Development on Unmanned Aerial Systems, Cranfield, United Kingdom of Great Britain and Northern Ireland (the). https://doi.org/10.1109/reduas47371.2019.8999671 ( reposiTUm)

Kohl, D., Kerschner, C., Mesquida, P., & Schitter, G. (2019). Increasing the SNR of Electrical AFM Methods by Active Mechanical Q-control. In IFAC-PapersOnLine (pp. 307–312). IFAC-PapersOnLine/Elsevier. https://doi.org/10.1016/j.ifacol.2019.11.692 ( reposiTUm)

Csencsics, E., Sitz, B., & Schitter, G. (2019). A Fast Piezo Actuated Tip/Tilt Mirror for raster scan applications. In IFAC-PapersOnLine (pp. 289–294). IFAC-PapersOnLine/Elsevier. https://doi.org/10.1016/j.ifacol.2019.11.689 ( reposiTUm)

Sinn, A., Riel, T., Deisl, F., Schachner, S., & Schitter, G. (2019). High-bandwidth tip-tilt vibration compensation in telescope systems. In IFAC-PapersOnLine (pp. 549–554). IFAC-PapersOnLine/Elsevier. https://doi.org/10.1016/j.ifacol.2019.11.733 ( reposiTUm)

Gsellmann, P., Melik-Merkumians, M., & Schitter, G. (2018). Comparison of Code Measures of IEC 61131-3 and 61499 standards for Typical Automation Applications. In Proceedings of the 2018 IEEE 23rd International Conference on Emerging Technologies and Factory Automation (pp. 1047–1050). http://hdl.handle.net/20.500.12708/76304 ( reposiTUm)

Riel, T., Galffy, A., & Schitter, G. (2018). Analysis and Robust Control of an Precision Motion Platform using Disturbance Compensation. In Proceedings of the IEEE Conference on Control Technology and Applications (CCTA) (p. 6). http://hdl.handle.net/20.500.12708/76269 ( reposiTUm)

Schlarp, J., Csencsics, E., & Schitter, G. (2018). Feature detection and scan area selection for 3D laser scanning sensors. In 2018 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM). 2018 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, Auckland, New Zealand. https://doi.org/10.1109/aim.2018.8452235 ( reposiTUm)

Ito, S., Poik, M., Csencsics, E., Schlarp, J., & Schitter, G. (2018). Scanning Chromatic Confocal Sensor for Fast 3D Surface Characterization. In Proceedings of the 2018 Summer Topical Meeting, Advancing Precision in Additive Manufacturing (pp. 226–231). http://hdl.handle.net/20.500.12708/76244 ( reposiTUm)

Schlarp, J., Csencsics, E., Ito, S., & Schitter, G. (2018). Design and Evaluation of a 3D Printed Flexure for a Fast Steering Mirror. In Proceedings of the 2018 Summer Topical Meeting, Advancing Precision in Additive Manufacturing (p. 5). http://hdl.handle.net/20.500.12708/76256 ( reposiTUm)

Csencsics, E., Ito, S., Schlarp, J., & Schitter, G. (2018). System Integration and Control of Mechatronic Imaging Systems. In Proceedings of the IEEJ International Workshop on Sensing, Actuation, Motion Control and Optimization (SAMCON) (p. 8). http://hdl.handle.net/20.500.12708/76361 ( reposiTUm)

Bibl, M., Zech, C., & Schitter, G. (2018). Design and Control of a Ball on Ball System With a Programmable Logic Controller and Vision Feedback. In Proceedings of the IEEJ International Workshop on Sensing, Actuation, Motion Control and Optimization (SAMCON) (p. 6). http://hdl.handle.net/20.500.12708/76149 ( reposiTUm)

Poik, M., Kohl, D., & Schitter, G. (2018). Similarity-based Feedback Control for Linear Operation of Piezoelectric Actuators. In 2018 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (p. 6). http://hdl.handle.net/20.500.12708/76407 ( reposiTUm)

Ito, S., & Schitter, G. (2018). Optimal Fail-Safe Motion Using Dynamic Brake for Lorentz-actuated AFM. In Proceedings of the 2018 15th International Workshop on Advanced Motion Control (AMC) (p. 6). http://hdl.handle.net/20.500.12708/76122 ( reposiTUm)

Cigarini, F., Ito, S., Troppmair, S., & Schitter, G. (2018). Comparison of a Voice Coil and a Hybrid Reluctance Actuator via FEM. In Proceedings of the IEEJ International Workshop on Sensing, Actuation, Motion Control and Optimization (SAMCON) (p. 6). http://hdl.handle.net/20.500.12708/76124 ( reposiTUm)

Ito, S., Troppmair, S., Cigarini, F., & Schitter, G. (2018). Hybrid Reluctance Actuator for High-speed Scanning with Nanometer Resolution. In Proceedings of the IEEJ International Workshop on Sensing, Actuation, Motion Control and Optimization (SAMCON) (p. 6). http://hdl.handle.net/20.500.12708/76123 ( reposiTUm)

Csencsics, E., & Schitter, G. (2017). Design of a phase-locked-loop-based control scheme for Lissajous-trajectory scanning of fast steering mirrors. In Proceedings of the American Control Conference (ACC), 2017 (p. 6). http://hdl.handle.net/20.500.12708/75796 ( reposiTUm)

Csencsics, E., & Schitter, G. (2017). Parametric PID Controller Tuning for a Fast Steering Mirror. In Proceedings of the 1st IEEE Conference on Control Technology and Applications (CCTA (p. 6). http://hdl.handle.net/20.500.12708/75792 ( reposiTUm)

Riel, T., Galffy, A., Sinn, A., & Schitter, G. (2017). Improvement of the angular precision of an optical metrology platform by disturbance compensation. In Proceedings of the 2017 Spring Topical Meeting on Precision Engineering and Optics: What are the Limits of Precision, and How to Characterize Them? (pp. 15–20). http://hdl.handle.net/20.500.12708/75847 ( reposiTUm)

Sinn, A., Riel, T., Deisl, F., & Schitter, G. (2017). Tip-tilt vibration compensation: A system analysis. In Proceedings of 2017 Spring Topical Meeting on Precision Engineering and Optics: What are the Limits of Precision, and How to Characterize Them? (pp. 42–47). http://hdl.handle.net/20.500.12708/75793 ( reposiTUm)

Kohl, D., Kerschner, C., & Schitter, G. (2017). Automatic Fourier Synthesis Based Input-Shaping for Scanning Piezo-Electric Actuators. In Proceedings of the 2017 IEEE International Conference on Advanced Intelligent Mechatronics (AIM2017) (pp. 1083–1088). http://hdl.handle.net/20.500.12708/75909 ( reposiTUm)

Kohl, D., Hoser, S., & Schitter, G. (2017). Budgeting of Systematic Versus Stochastic Errors in Sensor Fusion for Piezo Electric Transducers. In IFAC-PapersOnLine (pp. 7651–7656). https://doi.org/10.1016/j.ifacol.2017.08.1165 ( reposiTUm)

Steinegger, M., Melik-Merkumians, M., & Schitter, G. (2017). Ontology-based framework for the generation of interlock code with redundancy elimination. In 2017 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). 22nd IEEE International Conference on Emerging Technologies And Factory Automation, Limassol, Cyprus. https://doi.org/10.1109/etfa.2017.8247710 ( reposiTUm)

Steinegger, M., Melik-Merkumians, M., Zajc, J., & Schitter, G. (2017). A framework for automatic knowledge-based fault detection in industrial conveyor systems. In 2017 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA). 22nd IEEE International Conference on Emerging Technologies And Factory Automation, Limassol, Cyprus. https://doi.org/10.1109/etfa.2017.8247705 ( reposiTUm)

Csencsics, E., Schlarp, J., & Schitter, G. (2017). Bandwidth extension of hybrid-reluctance-force-based tip/tilt system by reduction of eddy currents. In Proceedings of the 2017 IEEE International Conference on Advanced Intelligent Mechatronics (AIM2017) (pp. 1167–1172). http://hdl.handle.net/20.500.12708/75795 ( reposiTUm)

Csencsics, E., & Schitter, G. (2017). Mechatronisches Design und Regelung eines 2D Kippspiegelsystems. In 51. Regelungstechnisches Kolloquium (p. 2). http://hdl.handle.net/20.500.12708/75797 ( reposiTUm)

Ito, S., Neyer, D., Steininger, J., & Schitter, G. (2017). Dual Actuation of Fast Scanning Axis for High-speed Atomic Force Microscopy. In Proceedings of the IFAC 2017 World Congress (p. 6). http://hdl.handle.net/20.500.12708/75738 ( reposiTUm)

Ito, S., Yoo, H. W., & Schitter, G. (2017). Comparison of Modeling-free Learning Control Algorithms for Galvanometer Scanner’s Periodic Motion. In AIM 2017 Proceedings (p. 6). http://hdl.handle.net/20.500.12708/75734 ( reposiTUm)

Varhegyi, T., Melik-Merkumians, M., Steinegger, M., Halmetschlager, G., & Schitter, G. (2017). A Visual Servoing Approach for a Six Degrees-of-Freedom Industrial Robot by RGB-D Sensing. In P. M. Roth, M. Vincze, W. Kubinger, A. Müller, B. Blaschitz, & S. Stolc (Eds.), Proceedings of the OAGM&ARW Joint Workshop Vision, Automation and Robotics (pp. 81–86). Verlag der Technischen Universität Graz. https://doi.org/10.3217/978-3-85125-524-9-14 ( reposiTUm)

Steinegger, M., Plaschka, N., Melik-Merkumians, M., & Schitter, G. (2016). A framework for modular and distributable control of reconfigurable robotic systems. In 2016 IEEE International Conference on Industrial Technology (ICIT). 2016 IEEE International Conference on Industrial Technology, Taipei, Taiwan, Non-EU. https://doi.org/10.1109/icit.2016.7474862 ( reposiTUm)

Riel, T., Katalenic, A., Saathof, R., & Schitter, G. (2016). Dynamic Error Budgeting for a Friction-afflicted Permanent Magnet Synchronous Motor. In Proceedings ASPE 2016 Spring Topical Meeting - Precision Mechatronic SystemDesign and Control (pp. 74–79). http://hdl.handle.net/20.500.12708/75144 ( reposiTUm)

Nahar, S., Schmets, A., Schitter, G., & Scarpas, A. (2016). Quantifying the Thermo-mechanical Response of Bitumen from Micro-Phase Properties. In TRB 95th Annual Meeting: Compendium of Papers (p. 16). http://hdl.handle.net/20.500.12708/74776 ( reposiTUm)

Kugi, A., & Craig, I. K. (2016). FOREWORD 17th IFAC Symposium on Control, Optimization and Automation in Mining, Mineral and Metal Processing MMM 2016. In G. Schitter (Ed.), IFAC-PapersOnLine (pp. i–vi). IFAC-PapersOnLine/Elsevier. https://doi.org/10.1016/s2405-8963(16)32409-0 ( reposiTUm)

Kohl, D., Mesquida, P., & Schitter, G. (2016). Quantitative DC-free Kelvin Probe Force Microscopy. In Final Program 42nd International Conference on Micro and Nano Engineering (p. 2). http://hdl.handle.net/20.500.12708/75404 ( reposiTUm)

Steinegger, M., Melik-Merkumians, M., Zajc, J., & Schitter, G. (2016). Automatic generation of diagnostic handling code for decentralized PLC-based control architectures. In 2016 IEEE 21st International Conference on Emerging Technologies and Factory Automation (ETFA). 21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016), Berlin, Germany. https://doi.org/10.1109/etfa.2016.7733694 ( reposiTUm)

Saathof, R., & Schitter, G. (2016). Low photon-count tip-tilt sensor. In AS16 Proceedings (p. 8). http://hdl.handle.net/20.500.12708/75435 ( reposiTUm)

Kohl, D., Mick, D., Riel, T., Saathof, R., & Schitter, G. (2016). Extending the Range of Geophones by Negative Impedance Converter. In Proceedings of the 7th IFAC Symposium on Mechatronic Systems (pp. 541–546). IFAC-PapersOnLine/Elsevier. http://hdl.handle.net/20.500.12708/75403 ( reposiTUm)

Melik-Merkumians, M., Baierling, M., & Schitter, G. (2016). A service-oriented domain specific language programming approach for batch processes. In 2016 IEEE 21st International Conference on Emerging Technologies and Factory Automation (ETFA). 21st IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2016), Berlin, Germany. https://doi.org/10.1109/etfa.2016.7733729 ( reposiTUm)

Cigarini, F., Csencsics, E., Saathof, R., & Schitter, G. (2016). Design of Tuneable Damping for Precision Positioning of a Two-Body System. In Proceedings of the 7th IFAC Symposium on Mechatronic Systems (pp. 222–227). IFAC-PapersOnLine/Elsevier. http://hdl.handle.net/20.500.12708/75239 ( reposiTUm)

Riel, T., Saathof, R., Katalenic, A., & Schitter, G. (2016). Noise Analysis and Improvement of a Permanent Magnet Synchronous Motor by Dynamic Error Budgeting. In Proceedings of the 7th IFAC Symposium on Mechatronic Systems (pp. 339–346). http://hdl.handle.net/20.500.12708/75238 ( reposiTUm)

Yoo, H. W., van Royen, M. E., van Cappellen, W. A., Houtsmuller, A. B., Verhaegen, M., & Schitter, G. (2016). Adaptive Optics for Confocal Laser Scanning Microscopy with Adjustable Pinhole. In Proceedings of SPIE Vol. 9887, Biophotonics: Photonic Solutions for Better Health Care V (pp. 1–11). http://hdl.handle.net/20.500.12708/75125 ( reposiTUm)

Thier, M., Saathof, R., Sinn, A., Hainisch, R., & Schitter, G. (2016). Six Degree of Freedom Vibration Isolation Platform for In-Line Nano-Metrology. In Proceedings of the 7th IFAC Symposium on Mechatronic Systems (pp. 149–156). http://hdl.handle.net/20.500.12708/75245 ( reposiTUm)

Unger, S., Ito, S., Kohl, D., & Schitter, G. (2016). Development of a Compact Atomic Force Microscope Based on an Optical Pickup Head. In Proceedings of the 7th IFAC Symposium on Mechatronic Systems (pp. 629–635). http://hdl.handle.net/20.500.12708/75246 ( reposiTUm)

Bibl, M., Robin, M., Steinegger, M., & Schitter, G. (2016). Framework for Implementation of Iterative Learning Control on Programmable Logic Controllers. In Proceedings of 2016 IEEE 21th Conference on Emerging Technologies & Factory Automation (p. 4). http://hdl.handle.net/20.500.12708/75244 ( reposiTUm)

Csencsics, E., Thier, M., Siegl, P., & Schitter, G. (2016). Mechatronic Design of an Active Two-body Vibration Isolation System. In Proceedings of the 7th IFAC Symposium on Mechatronic Systems (pp. 133–140). IFAC-PapersOnLine/Elsevier. http://hdl.handle.net/20.500.12708/75240 ( reposiTUm)

Ito, S., Cigarini, F., Unger, S., & Schitter, G. (2016). Flexure design for precision positioning using low-stiffness actuators. In Proceedings of the 7th IFAC Symposium on Mechatronic Systems (pp. 200–205). http://hdl.handle.net/20.500.12708/75241 ( reposiTUm)

Csencsics, E., Saathof, R., & Schitter, G. (2016). Design of a Dual-Tone Controller for Lissajous-based Scanning of Fast Steering Mirrors. In Proceeding of the 2016 American Control Conference (pp. 461–466). http://hdl.handle.net/20.500.12708/75271 ( reposiTUm)

Sinn, A., Riel, T., Deisl, F., Saathof, R., & Schitter, G. (2016). Low-Power Reflective Optical Communication System for Pico- and Nano-Satellites. In AMOS 2016 Proceedings (pp. 1403–1410). http://hdl.handle.net/20.500.12708/75337 ( reposiTUm)

Riel, T., Saathof, R., Katalenic, A., & Schitter, G. (2016). Tracking Performance Analysis and Control of a Small Robotic Telescope System. In AMOS 2016 Proceedings (p. 8). http://hdl.handle.net/20.500.12708/75340 ( reposiTUm)

Kohl, D., Riel, T., Saathof, R., Steininger, J., & Schitter, G. (2016). Auto-Tuning PI Controller for Surface Tracking in Atomic Force Microscopy - A Practical Approach. In Proceedings of the 2016 American Control Conference (p. 6). http://hdl.handle.net/20.500.12708/75405 ( reposiTUm)

Saathof, R., Riel, T., Bibl, M., Kohl, D., Yoo, H. W., & Schitter, G. (2016). Non-parametric robustness analysis for feedback motion control for a high precision stage with large mass uncertainty. In Proceedings of the 2016 American Control Conference (pp. 2611–2616). http://hdl.handle.net/20.500.12708/75434 ( reposiTUm)

Schitter, G. (2015). Advanced Mechatronics for Precision Engineering and Mechatronic Imaging Systems. In Proceedings of the 8th Vienna International Conference on Mathematical Modelling (MATHMOD) (pp. 942–943). http://hdl.handle.net/20.500.12708/74529 ( reposiTUm)

Thier, M., Saathof, R., Hainisch, R., & Schitter, G. (2015). Vibration Compensation Platform for Robot-based Nanoscale Measurements. In Proceedings of the 15th international conference of the european society for precision engineering and nanotechnology (pp. 211–212). http://hdl.handle.net/20.500.12708/74905 ( reposiTUm)

Paris, R., Melik-Merkumians, M., & Schitter, G. (2015). Vision-based probabilistic absolute position sensor. In 2015 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) Proceedings. IEEE International Instrumentation and Measurement Technology Conference (I2MTC) 2015, Pisa, Italy. https://doi.org/10.1109/i2mtc.2015.7151601 ( reposiTUm)

Nahar, S., Schmets, A., Kasbergen, C., Schitter, G., & Scarpas, A. (2015). Self-Healing of Bituminous Materials by Damage Reversal at the Microstructural Scale. In Annual Meeting Compendium of Papers (p. 15). http://hdl.handle.net/20.500.12708/74218 ( reposiTUm)

Ito, S., Neyer, D., Pirker, S., Steininger, J., & Schitter, G. (2015). Atomic Force Microscopy Using Voice Coil Actuators for Vibration Isolation. In Proceedings of the IEEE/ASME International conference on advanced intelligent mechatronics AIM2015 (p. 6). http://hdl.handle.net/20.500.12708/74552 ( reposiTUm)

Steininger, J., Paris, R., & Schitter, G. (2014). Improving the Deflection Readout Mechanism of an Atomic Force Microscope. In MESS14 Microelectronic Systems Symposium, Band 76 der OVE-Schriftenreihe (p. 22). http://hdl.handle.net/20.500.12708/74047 ( reposiTUm)

Steininger, J., Paris, R., & Schitter, G. (2014). Increasing sensitivity while reducing crosstalk of the force sensor in atomic force microscopes. In Proceedings of the 14th International Conference of the European Society for Precision Engineering and Nanotechnology (pp. 321–324). Euspen. http://hdl.handle.net/20.500.12708/74046 ( reposiTUm)

Nahar, S., Schmets, A., Schitter, G., & Scarpas, A. (2014). Quantitative nanomechanical property mapping of bitumen micro-phases by peak-force Atomic Force Microscopy. In Asphalt Pavements (pp. 1397–1406). Taylor & Francis Group. http://hdl.handle.net/20.500.12708/74106 ( reposiTUm)

Ito, S., Steininger, J., & Schitter, G. (2014). Sliding Mode and PID Control of a Dual Stage Actuator for Precision Positioning. In Proceedings of the 19th World Congress of the International Federation of Automatic Control (pp. 6550–6555). International Federation of Automatic Control. http://hdl.handle.net/20.500.12708/74114 ( reposiTUm)

Nahar, S., Qiu, J., Schmets, A., Schlangen, E., Shirazi, M., Van de Ven, M., Schitter, G., & Scarpas, A. (2014). Turning Back Time: Rheological and Microstructural Assessment of Rejuvenated Bitumen. In Proceedings of the Transportation Research Board 93rd annual meeting 2014 (p. 16). http://hdl.handle.net/20.500.12708/74221 ( reposiTUm)

Steininger, J., & Schitter, G. (2014). Influence of the Photodetector Geometry on the Deflection Measurement in Atomic Force Microscopes. In Proceedings of the ASPE 2014 Annual Meeting (pp. 674–679). http://hdl.handle.net/20.500.12708/74258 ( reposiTUm)

Steinegger, M., Zoitl, A., Fein, M., & Schitter, G. (2013). Design Patterns for Separating Fault Handling from Control Code in Discrete Manufacturing Systems. In Proc. of the 39th Annual Conference of the IEEE Industrial Electronics Society (pp. 4366–4371). http://hdl.handle.net/20.500.12708/73663 ( reposiTUm)

van Loon, A., Keune, K., Dik, J., Kohl, D., Chang, P. I., & Schitter, G. (2013). Analytical Spectroscopy in Art and Archaeology. In Book of Abstracts - Technart 2013. Technart 2013, Amsterdam, Netherlands, EU. http://hdl.handle.net/20.500.12708/73679 ( reposiTUm)

Hametner, R., Schitter, G., Voigt, A., & Zoitl, A. (2013). Implementation Guidelines for Closed Loop Control Algorithms on PLCs. In 2013 IEEE International Conference on Industrial Technology (pp. 1297–1302). http://hdl.handle.net/20.500.12708/73695 ( reposiTUm)

Chang, P. I., Chavan, D., Paris, R., Iannuzzi, D., & Schitter, G. (2013). Towards High Speed Ferrule-Top Atomic Force Microscopy. In Proceedings of 6th IFAC Symposium on Mechatronic Systems (pp. 132–137). http://hdl.handle.net/20.500.12708/73739 ( reposiTUm)

Ito, S., Steininger, J., Chang, P. I., & Schitter, G. (2013). High-precision Positioning System using a Low-stiffness Dual Stage Actuator. In Proceedings of 6th IFAC Symposium on Mechatronic Systems (pp. 20–27). http://hdl.handle.net/20.500.12708/73697 ( reposiTUm)

Paris, R., Thurner, T., & Schitter, G. (2013). Compensation Based Displacement Measurement Using Objective Laser Speckles. In Proceedings of 6th IFAC Symposium on Mechatronic Systems (pp. 264–270). http://hdl.handle.net/20.500.12708/73696 ( reposiTUm)

Prostejovsky, A., Merdan, M., Schitter, G., & Dimeas, A. (2013). Demonstration of a Multi-Agent-Based Control System for Active Electric Power Distribution Grids. In Proceedings of the IEEE International Workshop on Intelligent Energy Systems (IWIES’13) (pp. 76–81). http://hdl.handle.net/20.500.12708/73701 ( reposiTUm)

Lepuschitz, W., Groessing, B., Merdan, M., & Schitter, G. (2013). Evaluation of a Multi-Agent Approach for a Real Transportation System. In 2013 IEEE International Conference on Industrial Technology (pp. 1273–1278). http://hdl.handle.net/20.500.12708/73706 ( reposiTUm)

Ito, S., Steininger, J., & Schitter, G. (2013). Influence of fine actuator stiffness in dual stage actuation on vibration isolation properties. In Proceedings of: Precision Control for Advanced Manufacturing Systems (pp. 126–130). http://hdl.handle.net/20.500.12708/73705 ( reposiTUm)

Yoo, H. W., Ito, S., Verhaegen, M., & Schitter, G. (2013). Transformation-based iterative learning control for non-collocated sensing of a galvanometer scanner. In 2013 European Control Conference (ECC). European Control Conference ECC 2013, Zürich, Non-EU. https://doi.org/10.23919/ecc.2013.6669311 ( reposiTUm)

Nahar, S., Dillingh, B., Erkens, S., Schmets, A., Fischer, H. R., Scarpas, A., & Schitter, G. (2013). Is Atomic Force Microscopy suited as tool for fast screening of bituminous materials? An inter-laboratory comparison study. In TRB 92nd Annual Meeting Compendium of Papers (p. 16). http://hdl.handle.net/20.500.12708/73835 ( reposiTUm)

Nahar, S., Schmets, A., Scarpas, A., & Schitter, G. (2013). Temperature induced healing in strained bituminous materials observed by atomic force microscopy. In Proceedings of the 4th International Conference on Self-Healing Materials (pp. 489–493). http://hdl.handle.net/20.500.12708/73836 ( reposiTUm)

Paris, R., Thier, M., Thurner, T., & Schitter, G. (2012). ’Shack-Hartmann Wavefront Sensor based on an Industrial Smart Camera. In Proceedings on IEEE Instrumentation and Measurement Technology Conference (I2MTC) (pp. 1127–1132). http://hdl.handle.net/20.500.12708/73116 ( reposiTUm)

Kuiper, S., Van den Hof, P. M. J., & Schitter, G. (2012). Trade-off between the control bandwidth and the measurement accuracy in Atomic Force Microscopy. In Proceedings on IEEE Instrumentation and Measurement Technology Conference (I2MTC) (pp. 888–893). http://hdl.handle.net/20.500.12708/73118 ( reposiTUm)

Yoo, H. W., Verhaegen, M., von Royen, M. E., & Schitter, G. (2012). Automated Adjustment of Aberration Correction in Scanning Confocal Microscopy. In Proceedings on IEEE Instrumentation and Measurement Technology Conference (I2MTC) (p. 6). http://hdl.handle.net/20.500.12708/73117 ( reposiTUm)

Yoo, H. W., Ito, S., Verhaegen, M., & Schitter, G. (2012). Iterative Learning Control of a Galvanometer Scanner for Fast and Accurate Scanning Laser Microscopy. In Proceedings on Mechartonics 2012 (pp. 537–543). http://hdl.handle.net/20.500.12708/73119 ( reposiTUm)

Ito, S., Steininger, J., Chang, P. I., & Schitter, G. (2012). Control of a long range high-precision positioning system. In Tagungsband GMA-Fachausschuss 1.30 “Modellbildung, Identifikation und Simualtion in der Automatisierungstechnik” (p. 56). Technische Universität Darmstadt Institut für Automatisierungstechnik und Mechatronik. http://hdl.handle.net/20.500.12708/73018 ( reposiTUm)

Kuiper, S., Van den Hof, P. M. J., & Schitter, G. (2011). Towards Integrated Design of a Robust Feedback Controller and Topography Estimator for Atomic Force Microscopy. In IFAC Proceedings Volumes (pp. 12709–12714). https://doi.org/10.3182/20110828-6-it-1002.01619 ( reposiTUm)

Kuiper, S., Van den Hof, P. M. J., & Schitter, G. (2011). Integrated Design of the Feedback Controller and Topography Estimator in Atomic Force Microscopy. In Book of Abstracts. 30th Benelux Meeting on Systems and Control, Lommel, Belgium, EU. http://hdl.handle.net/20.500.12708/71941 ( reposiTUm)

van Hulzen, J. R., Schitter, G., Van den Hof, P. M. J., & van Eijk, J. (2010). Dynamics and Modal Control of Piezoelectric Tube Actuators. In Proceedings of the 5th IFAC Symposium on Mechatronic Systems (pp. 317–323). http://hdl.handle.net/20.500.12708/71838 ( reposiTUm)

Song, H., Fraanje, R., Schitter, G., Vdovin, G., & Verhaegen, M. (2010). Modeling and Control of a Nonlinear Dynamic Adaptive Optics System. In Proceedings of the 5th IFAC Symposium on Mechatronic Systems (pp. 299–305). http://hdl.handle.net/20.500.12708/71837 ( reposiTUm)

Kuiper, S., Fleming, A. J., & Schitter, G. (2010). Dual Actuation for High Speed Atomic Force Microscopy. In Proceedings of the 5th IFAC Symposium on Mechatronic Systems (pp. 220–226). http://hdl.handle.net/20.500.12708/71839 ( reposiTUm)

van Hulzen, J. R., Schitter, G., van Eijk, J., & Van den Hof, P. M. J. (2010). Modal actuation for high-bandwidth nano-positioning. In 2010 American Control Conference (pp. 6525–6530). http://hdl.handle.net/20.500.12708/76132 ( reposiTUm)

Kuiper, S., & Schitter, G. (2010). Dual actuated nano-positioning for high speed Atomic Force Microscopy. In Proceedings of the 10th International Conference of the European Society of Precision Engineering and Nanotechnology (EUSPEN) (pp. 225–228). http://hdl.handle.net/20.500.12708/76148 ( reposiTUm)

van Hulzen, J. R., Schitter, G., van Eijk, J., & Van den Hof, P. M. J. (2010). Modal actuation for high-bandwidth nano-positioning. In Proceedings of the 10th International Conference of the European Society of Precision Engineering and Nanotechnology (EUSPEN) (pp. 478–481). http://hdl.handle.net/20.500.12708/76147 ( reposiTUm)

Kuiper, S., & Schitter, G. (2009). MIMO self sensing control of a piezoelectric tube scanner. In Proceedings of the ASME 2009 Dynamic Systems and Control Conference (pp. 1–7). http://hdl.handle.net/20.500.12708/76134 ( reposiTUm)

Schitter, G., Rijkée, W. F., & Phan, N. (2008). Dual actuation for high bandwidth nano-positioning. In Proceedings of the 2008 Conference on Decision and Control (pp. 5176–5181). http://hdl.handle.net/20.500.12708/76135 ( reposiTUm)

Schitter, G., & Phan, N. (2008). Field programmable analog array (FPAA) based control of an Atomic Force Microscope. In Proceedings of the 2008 American Control Conference (pp. 2690–2695). http://hdl.handle.net/20.500.12708/76136 ( reposiTUm)

Song, H., Fraanje, R., Vdovin, G., Schitter, G., & Verhaegen, M. (2007). Hysteresis Compensation for a Piezo Deformable Mirror. In Proceedings of the 6th International Workshop on Adaptive Optics for Industry and Medicine (pp. 112–117). http://hdl.handle.net/20.500.12708/76139 ( reposiTUm)

Schitter, G. (2007). Advanced mechanical design and control methods for atomic force microscopy in real-time. In Proceedings of the 2007 American Control Conference (pp. 3503–3508). http://hdl.handle.net/20.500.12708/76138 ( reposiTUm)

Abramovich, D. Y., Andersson, S. B., Pao, L. Y., & Schitter, G. (2007). A Tutorial on the Mechanisms, Dynamics, and Control of Atomic Force Microscopes. In Proceedings of the 2007 American Control Conference (pp. 3488–3502). http://hdl.handle.net/20.500.12708/76137 ( reposiTUm)

Jungmann, R., Schitter, G., Fantner, G. E., Lauer, M. E., Hansma, P. K., & Thurner, P. J. (2007). Real-Time Microdamage and Strain Detection during Micromechanical Testing of Single Trabeculae. In Proceedings of the Annual Meeting of the Society of Experimental Mechanics (p. 11). http://hdl.handle.net/20.500.12708/76133 ( reposiTUm)

Schitter, G., Åström, K. J., DeMartini, B. E., Turner, K. L., Fantner, G. E., Thurner, P. J., & Hansma, P. K. (2006). Design and modeling of a high-speed scanner for atomic force microscopy. In Proceedings of the 2006 American Control Conference (pp. 502–507). http://hdl.handle.net/20.500.12708/76141 ( reposiTUm)

Schitter, G., Fantner, G. E., Thurner, P. J., Adams, J., & Hansma, P. K. (2006). Design and characterization of a novel scanner for high-speed atomic force microscopy. In Proceedings of the 4th IFAC Symposium on Mechatronic Systems (pp. 819–824). http://hdl.handle.net/20.500.12708/76140 ( reposiTUm)

Rieber, J. M., Schitter, G., Stemmer, A., & Allgöwer, F. (2005). Experimental application of l1-optimal control for an atomic force microscope. In Proceedings of the 16th Triennial IFAC World Congress (pp. 664–669). http://hdl.handle.net/20.500.12708/76144 ( reposiTUm)

Thurner, P. J., Müller, R., Kindt, J. H., Schitter, G., Fantner, G. E., Wyss, P., Senhauser, U., & Hansma, P. K. (2005). Novel techniques for high resolution functional imaging of trabecular bone. In SPIE (pp. 515–526). SPIE. http://hdl.handle.net/20.500.12708/76143 ( reposiTUm)

Kindt, J. H., Fantner, G. E., Thurner, P. J., Schitter, G., & Hansma, P. K. (2005). A New Technique for Imaging Mineralized Fibrils on Bovine Trabecular Bone Fracture Surfaces by Atomic Force Microscopy. In Proceedings of the Material Research Society Symposium 2005 (p. 7). http://hdl.handle.net/20.500.12708/76151 ( reposiTUm)

Schitter, G., Fantner, G. E., Kindt, J. H., Thurner, P. J., & Hansma, P. K. (2005). On recent developments for high-speed atomic force microscopy. In Proceedings IEEE/ASME International Conference on Advanced Intelligent Mechatronics AIM2005 (pp. 261–264). http://hdl.handle.net/20.500.12708/76142 ( reposiTUm)

Thurner, P. J., Erickson, B., Schriock, Z., Langan, J., Scott, J. S., Zhao, M., Fantner, G. E., Turner, P., Kindt, J. H., Schitter, G., & Hansma, P. K. (2005). High-Speed Photography of Human Trabecular Bone during Compression. In Structure and Mechanical Behavior of Biological Materials (p. 6). http://hdl.handle.net/20.500.12708/76150 ( reposiTUm)

Schitter, G., Stemmer, A., & Allgöwer, F. (2003). Robust 2DOF-control of a piezoelectric tube scanner for high speed atomic force microscopy. In IEEE Proceedings of the 2003 American Control Conference (pp. 3720–3725). http://hdl.handle.net/20.500.12708/76146 ( reposiTUm)

Stark, R., Schitter, G., Stark, M., Guckenberger, R., & Stemmer, A. (2003). Towards time-resolved dynamic atomic force microscopy: A state space model of the AFM. In Acoustical Imaging (pp. 741–748). Acoustical Imaging. http://hdl.handle.net/20.500.12708/76145 ( reposiTUm)

Wenger, M., Zoitl, A., & Schitter, G. (2016). Automatic Reengineering of IEC 61131-Based Control Applications into IEC 61499. In A. Zoitl & T. Strasser (Eds.), Distributed Control Applications (pp. 97–121). CRC Press, Boca Raton, London, New York (Taylor & Francis Group). http://hdl.handle.net/20.500.12708/29317 ( reposiTUm)

Kuiper, S., & Schitter, G. (2011). Improving the Imaging Speed of AFM with Modern Control Techniques. In E. Eleftheriou & S. O. R. Moheimani (Eds.), Control Technologies for Emerging Micro and Nanoscale Systems (pp. 83–100). Springer-Verlag, Berlin-Heidelberg. https://doi.org/10.1007/978-3-642-22173-6_5 ( reposiTUm)

Thurner, P. J., Oroudjev, E., Jungmann, R., Kreutz, C., Kindt, J. H., Schitter, G., Okouneva, T. O., Lauer, M. E., Fantner, G. E., Hansma, H., & Hansma, P. K. (2007). Imaging of Bone Ultrastructure using Atomic Force Microscopy. In Modern Research and Educational Topics in Microscopy (pp. 37–48). Formatex Microscopy Book Series. http://hdl.handle.net/20.500.12708/29719 ( reposiTUm)

Munnig Schmidt, R., Schitter, G., Rankers, A., & van Eijk, J. (2014). The Design of High Performance Mechatronics: 2nd Edition. High-Tech Functionality by Multidisciplinary System Integration. Delft University Press. http://hdl.handle.net/20.500.12708/23865 ( reposiTUm)

Thurner, P., Nalbach, M., Fuchs, M., Andriotis, O., Carriero, A., & Schitter, G. (2024, March 4). Micro- and Nanomechanics of Collagen-rich Tissues and Individual Fibrils [Keynote Presentation]. TMS 2024 – 153rd Annual Meeting & Exhibition, Orlando, United States of America (the). http://hdl.handle.net/20.500.12708/210356 ( reposiTUm)

Nalbach, M., Sensini, A., Motoi, N., Rufin, M., Focarete, M. L., Andriotis, O., Zucchelli, A., Schitter, G., Cristofolini, L., & Thurner, P. (2023, February 14). Comparative Dynamic Mechanical Analysis of Collagen Fibrils and PLLA Nanofibers [Poster Presentation]. ORS 2023 Annual Meeting, Dallas, Texas, United States of America (the). http://hdl.handle.net/20.500.12708/193533 ( reposiTUm)

Nalbach, M., Sensini, A., Motoi, N., Rufin, M., Andriotis, O., Zucchelli, A., Schitter, G., Cristofolini, L., & Thurner, P. (2022, June 27). DYNAMIC MECHANICAL ANALYSIS OF COLLAGEN FIBRILS AND ELECTROSPUN PLLA NANOFIBERS [Conference Presentation]. 27th Congress of the European Society of Biomechanics, Portugal. http://hdl.handle.net/20.500.12708/153302 ( reposiTUm)

Nalbach, M., Sensini, A., Motoi, N., Rufin, M., Andriotis, O., Zucchelli, A., Schitter, G., Cristofolini, L., & Thurner, P. (2022, June 27). DYNAMIC MECHANICAL ANALYSIS OF COLLAGEN FIBRILS AND ELECTROSPUN PLLA NANOFIBERS [Conference Presentation]. ESB 2022 - 27th Congress of the European Society of Biomechanics, Porto, Portugal. http://hdl.handle.net/20.500.12708/153301 ( reposiTUm)

Nalbach, M., Sensini, A., Motoi, N., Rufin, M., Andriotis, O., Zucchelli, A., Schitter, G., Cristofolini, L., & Thurner, P. (2022, September 22). Time-dependent mechanics of individual collagen fibrils and electrospun fibres [Conference Presentation]. Biomedical and bioinspired materials and structures: a cross-disciplinary approach 2022, Wien, Austria. http://hdl.handle.net/20.500.12708/154318 ( reposiTUm)

Nalbach, M., Motoi, N., Rufin, M., Andriotis, O., Schitter, G., & Thurner, P. (2022, June 27). CREEP BEHAVIOR OF INDIVIDUAL COLLAGEN FIBRILS IN TENSION IS DEPENDENT ON CROSS-LINKING [Conference Presentation]. ESB 2022 - 27th Congress of the European Society of Biomechanics, Porto, Portugal. http://hdl.handle.net/20.500.12708/153308 ( reposiTUm)

Nalbach, M., Motoi, N., Rufin, M., Andriotis, O., Schitter, G., & Thurner, P. (2022, June 26). Creep behavior of individual collagen fibrils in tension is dependenton cross-linking [Conference Presentation]. 27th Congress of the European Society of Biomechanics, Portugal. http://hdl.handle.net/20.500.12708/153853 ( reposiTUm)

Rufin, M., Nalbach, M., Andriotis, O. G., Poik, M., Schitter, G., & Thurner, P. J. (2021). Glycation increases indentation stiffness and decreases surface charge of individual collagen fibrils. 26th Congress of the European Society of Biomechanics - ESBiomech, Mailand, Italy. http://hdl.handle.net/20.500.12708/95531 ( reposiTUm)

Nalbach, M., Motoi, N., Gantner, F., Andriotis, O. G., Battle, L., Docaj, A., Ovsianikov, A., Schitter, G., Carriero, A., & Thurner, P. J. (2021). Osteogenesis Imperfecta: Brittle Bones From Stronger Collagen Fibrils. 26th Congress of the European Society of Biomechanics - ESBiomech, Mailand, Italy. http://hdl.handle.net/20.500.12708/95533 ( reposiTUm)

Rufin, M., Nalbach, M., Andriotis, O. G., Poik, M., Schitter, G., & Thurner, P. J. (2021). Effect of glycation on surface charge and indentation stiffness of individual collagen fibrils. Orthopaedic Research Society Annual Meeting (ORS 2021), Online, Unknown. http://hdl.handle.net/20.500.12708/95542 ( reposiTUm)

Rufin, M., Nalbach, M., Andriotis, O. G., Poik, M., Schitter, G., & Thurner, P. J. (2021). AGE-related changes in indentation stiffness and surface charge of individual collagen fibrils through MGO glycation. 13th European Biophysics Conference (EBSA), Vienna, Austria. http://hdl.handle.net/20.500.12708/95543 ( reposiTUm)

Nalbach, M., Motoi, N., Chalupa-Gantner, F., Andriotis, O. G., Ovsianikov, A., Schitter, G., & Thurner, P. J. (2021). Tensile viscoelasticity of individual collagen fibrils. 2021 NanoScientific Forum Europe (NSFE2021), Freiburg, Germany. http://hdl.handle.net/20.500.12708/95540 ( reposiTUm)

Rufin, M., Nalbach, M., Andriotis, O. G., Poik, M., Schitter, G., & Thurner, P. J. (2021). Effect of glycation on surface charge and indentation stiffness of individual collagen fibrils. Scientific Meeting of the 2021 Austrian Chapter of ESB, Online, Austria. http://hdl.handle.net/20.500.12708/95541 ( reposiTUm)

Nalbach, M., Motoi, N., Gantner, F., Spörl, F. C., Andriotis, O. G., Ovsianikov, A., Schitter, G., & Thurner, P. J. (2020). Novel instrument for rapid and force controlled tensile testing of single collagen fibrils. Scientific Meeting of the Austrian Chapter of ESB, online / Zoom, Austria. http://hdl.handle.net/20.500.12708/95404 ( reposiTUm)

Schitter, G. (2019). Integrated System Design and Control of Mechatronic Imaging Systems. 7th International Conference on Control, Mechatronics and Automation ICCMA, Delft, Netherlands (the). http://hdl.handle.net/20.500.12708/91236 ( reposiTUm)

Schitter, G. (2019). Scientific Instrumentation for Atomic Force Microscopy: Adding Speed and Versatility. Mini-Symposium on Scanning Probe Microscopy, Delft, Netherlands (the). http://hdl.handle.net/20.500.12708/91237 ( reposiTUm)

Schitter, G. (2019). Extending Nano-Mechanical and Electrical Measurement Modes in AFM: A System Integration Approach. Nano and Photonics 2019, Mauterndorf, Austria. http://hdl.handle.net/20.500.12708/91240 ( reposiTUm)

Schitter, G. (2019). Scientific Instrumentation for Imaging at the Nanoscale: Adding Speed and Versatility. Biointerface Doctoral School, TU Wien, Neusiedl am See, Austria. http://hdl.handle.net/20.500.12708/91239 ( reposiTUm)

Schitter, G. (2019). Mechatronic design and control of scanning measurement systems. Infineon Summer School, Villach, Austria. http://hdl.handle.net/20.500.12708/91238 ( reposiTUm)

Thurner, P. J., Desissaire, S., Rohatschek, A., Nalbach, M., Schitter, G., & Andriotis, O. G. (2018). Collagen mechanics at the fibril level and below as a function of hydration, cross-linking, age and tissue function. XX. Linz Winter Workshop, Linz, Austria. http://hdl.handle.net/20.500.12708/90987 ( reposiTUm)

Thurner, P. J., Andriotis, O. G., Desissaire, S., Jones, M. G., Thorpe, C., Spiesz, E., Rohatschek, A., Nalbach, M., Schitter, G., Screen, H. R. C., & Davies, D. E. (2018). Micromechanics of collagen rich-tissues and nanomechanics of individual collagen fibrils as a function of hydration, cross-linking, age and tissue function. 8th World Congress of Biomechanics, WCB 2018, Dublin, Ireland. http://hdl.handle.net/20.500.12708/94908 ( reposiTUm)

Schitter, G. (2018). System Integration and Control of Mechatronic Imaging Systems. FEI Thermo Fisher Scientific, Brno, Czechia. http://hdl.handle.net/20.500.12708/91053 ( reposiTUm)

Kohl, D., Mesquida, P., & Schitter, G. (2017). Multi-frequency Kelvin Probe Force Microscopy Method for Charge Mapping Without DC-Bias. Nano and Photonics & FemtoMat, Mauterndorf, Austria. http://hdl.handle.net/20.500.12708/90936 ( reposiTUm)

Csencsics, E., Ito, S., Fuerst, M., Schlarp, J., Cigarini, F., & Schitter, G. (2017). Christian Doppler Laboratory “Precision Engineering for Automated In-line Metrology.” 1st GMAR workshop, Wien, Austria. http://hdl.handle.net/20.500.12708/90971 ( reposiTUm)

Mesquida, P., Stone, A., Ruiz, L., Kohl, D., Andriotis, O. G., & Schitter, G. (2017). Using Electrostatic Force Microscopy to Map Biophysical and Biochemical Processes at High Resolution. Nano and Photonics & FemtoMat, Mauterndorf, Austria. http://hdl.handle.net/20.500.12708/90986 ( reposiTUm)

Schitter, G. (2017). Scientific instrumentation for atomic force microscopy:adding speed and versatility. Seminar for Physical Chemistry and Materials Chemistry, Wien, Austria. http://hdl.handle.net/20.500.12708/90985 ( reposiTUm)

Schitter, G. (2017). Scientific Instrumentation for Atomic Force Microscopy: Adding Speed and Versatility. Seminar Hybrid Devices Group, Berlin, Germany. http://hdl.handle.net/20.500.12708/90984 ( reposiTUm)

Mesquida, P., Kohl, D., Andriotis, O. G., Thurner, P. J., Duer, M. J., Bansode, S. B., & Schitter, G. (2017). Kelvin-Probe Force Microscopy to Map Glycation of Proteins. AFM BioMed, Krakau, Poland. http://hdl.handle.net/20.500.12708/90974 ( reposiTUm)

Kohl, D., Mesquida, P., & Schitter, G. (2017). Pitfalls of practical KPFM-phase-tuning leading to polarity reversal on biological samples. AFM BioMed, Krakow, Poland. http://hdl.handle.net/20.500.12708/90975 ( reposiTUm)

Thier, M., Saathof, R., Hainisch, R., & Schitter, G. (2016). Metrology Platform to Enable In-Line Nanometrology. Industrial Technologies 2016, Amsterdam, Netherlands (the). http://hdl.handle.net/20.500.12708/90828 ( reposiTUm)

Lieb, A., Howald, L., Fricker, S., Thier, M., & Schitter, G. (2016). Atomic Force Microscope for In-Line Metrology. Industrial Technologies 2016, Amsterdam, Netherlands (the). http://hdl.handle.net/20.500.12708/90829 ( reposiTUm)

Schitter, G. (2015). Nanoscale Imaging Systems in Manufacturing. Nano and Photonics 2015, Mautendorf, Austria. http://hdl.handle.net/20.500.12708/90507 ( reposiTUm)

Schitter, G. (2015). Instrumentierung und Regelung für hochauflösende Positionier und Meßsysteme. 5. nanoNET-meeting, Wien, Austria. http://hdl.handle.net/20.500.12708/90556 ( reposiTUm)

Schitter, G. (2015). Präzises Positionieren und Messen in der Hochtechnologie. OVE Österreichischer Verband für Elektrotechnik, Wien, Austria. http://hdl.handle.net/20.500.12708/90557 ( reposiTUm)

Schitter, G. (2015). Control in Mechatronic Imaging Systems. High-Tech Mechatronics in (e)motion!, Delft, Netherlands (the). http://hdl.handle.net/20.500.12708/90503 ( reposiTUm)

Fraxedas, J., Staufer, U., Munnig Schmidt, R., Spronck, J. W., Trinidad, E. R., Deng, R., Schitter, G., Thier, M., Messineo, S., Ito, S., Hainisch, R., Saathof, R., Perez-Murano, F., Verdaguer, A., Blümel, A., List-Kratochvil, E. J. W., Koops, R., van Veghel, M., Sum, R., … Puigoriol-Forcada, J. M. (2014). Automated inline Metrology for Nanoscale Production - aim4np. European Conference on Surface Science 2014, Antalya, Turkey. http://hdl.handle.net/20.500.12708/90469 ( reposiTUm)

Koops, R., Staufer, U., Munnig Schmidt, R., Spronck, J. W., Trinidad, E. R., Deng, R., Schitter, G., Thier, M., Messineo, S., Ito, S., Hainisch, R., Saathof, R., Fraxedas, J., Perez-Murano, F., Verdaguer, A., Blümel, A., List-Kratochvil, E. J. W., van Veghel, M., Sum, R., … Puigoriol-Forcada, J. M. (2014). Automated in-line Metrology for Nanoscale Production - aim4np. 3rd International Conference on Industrial Technologies Research and Innovation, Athen, Greece. http://hdl.handle.net/20.500.12708/90468 ( reposiTUm)

Steininger, J., Ito, S., & Schitter, G. (2013). Modellbasierte Regelung eines dual aktuierten Nano-Positioniersystems. 47. Regelungstechnisches Kolloquium in Boppard, Boppard, Deutschland, EU. http://hdl.handle.net/20.500.12708/90198 ( reposiTUm)

Schitter, G. (2013). Mechatronics and Instrumentation for High-Speed High-Resolution Imaging Systems. Microscopy at the Frontiers of Science 2013, Tarragona, Spain, EU. http://hdl.handle.net/20.500.12708/90214 ( reposiTUm)

Schitter, G. (2013). Präzisionstechnologie: Positionieren, Abbilden und Messen in der Hochtechnologie. Kolloquium der Fakultät Maschinenbau & Mechatronik, Deggendorf, Deutschland, EU. http://hdl.handle.net/20.500.12708/90216 ( reposiTUm)

Schitter, G. (2013). Precision Engineering for Mechatronic Imaging Systems. Mini-Symposium on Control of Mechatronic Systems, Zürich, Schweiz, Non-EU. http://hdl.handle.net/20.500.12708/90215 ( reposiTUm)

Schitter, G. (2013). Towards Adaptive Optics in Confocal Scanning Laser Microscopy. Nano and Photonics 2013, Mauterndorf, Austria. http://hdl.handle.net/20.500.12708/90203 ( reposiTUm)

Schitter, G. (2013). Precision Engineering for Mechatronic Imaging Systems. BioXneT, South Hampton, EU. http://hdl.handle.net/20.500.12708/90199 ( reposiTUm)

Yoo, H. W., Schitter, G., & Verhaegen, M. (2012). Integrated Smart Microscopy. Smart Optics System 3rd Annual Meeting, Leiden, Netherlands, EU. http://hdl.handle.net/20.500.12708/89900 ( reposiTUm)

Schitter, G. (2012). High-speed AFM by mechatronic system integration. 2nd Workshop on Dynamics and Control of Micro and Nanoscale Systems, Newcastle, Australia, Non-EU. http://hdl.handle.net/20.500.12708/89904 ( reposiTUm)

Nahar, S., Schmets, A., Schitter, G., & Scarpas, A. (2012). Influence of thermal conditioning on microstructures of bituminous materials. International Conference on Scanning Probe Microscopy on Soft and Polymeric Materials, Netherlands, Rolduc, Kerkrade, EU. http://hdl.handle.net/20.500.12708/89905 ( reposiTUm)

Schitter, G. (2012). High-Speed Atomic Force Microscopy and Fast Mapping of Sample Properties at the Nanoscale. Uni Graz / TU Graz Kolloquium, Graz, Austria. http://hdl.handle.net/20.500.12708/90202 ( reposiTUm)

Schitter, G. (2012). Advanced Mechatronics for Precision Motion and Mechatronic Imaging Systems. Minisymposium on Advanced Mechatronic Systems, Zürich, Schweiz, Non-EU. http://hdl.handle.net/20.500.12708/90200 ( reposiTUm)

Schitter, G. (2012). Advanced Mechatronics for Mechatronic Imaging Systems and Precision Motion. Mechatronic Research Division, Veldhoven, Netherlands, EU. http://hdl.handle.net/20.500.12708/90201 ( reposiTUm)

Kohl, D., Schitter, G., & Staufer, U. (2012). The Potential of Magnetic Force Microscopy for Investigating Nano-Phase Iron. Scientific Preparations for Lunar Exploration, Noordwjik, NL, EU. http://hdl.handle.net/20.500.12708/89825 ( reposiTUm)

Nahar, S., Schitter, G., Schmets, A., & Scarpas, A. (2011). Engineering the Intrinsic Self-healing Capacity of Bituminous Materials. 6th IOP Symposium on Self Healing Materials, Gouda, Netherlands, EU. http://hdl.handle.net/20.500.12708/89615 ( reposiTUm)

Schitter, G. (2011). Atomic Force Microscopy in Real-Time. Nano and Photonics 2011, Mauterndorf, Austria. http://hdl.handle.net/20.500.12708/90204 ( reposiTUm)

Song, H., Fraanje, R., Schitter, G., Verhaegen, M., & Vdovin, G. (2009). Hysteresis Compensation in Wavefront-sensor-less Adaptive Optics Systems. 7th Workshop on Adaptive Optics for Industry and Medicine, Russia, Non-EU. http://hdl.handle.net/20.500.12708/91051 ( reposiTUm)

Munnig Schmidt, R., Verhaegen, M., Schitter, G., Doelman, N., Vdovin, G., Boller, K.-J., Bijkerk, F., Steinbuch, M., Rosielle, N., De Smet, M. D., Keller, C., & Stuik, R. (2008). Smart optics: the next step in precision system design. PACT 2008, Hilvarenbeek (the Netherlands), EU. http://hdl.handle.net/20.500.12708/91052 ( reposiTUm)