Wissenschaftliche Artikel

Aydin, R., Akdogan, A., Durakbasa, M. N., & Vanli, S. (2022). Castability Of Steering Knuckle From Aluminium Alloy By Low Pressure Die Casting Replacing Sand Casting Of Cast Iron. Acta Technica Napocensis. Series Applied Mathematics, Mechanics, and Engineering, 64(4s), 579–589. http://hdl.handle.net/20.500.12708/136591 ( reposiTUm)

Stojadinovic, S. M., Zivanovic, S., Slavkovic, N., & Durakbasa, N. M. (2021). Digital measurement twin for CMM inspection based on step-NC. International Journal of Computer Integrated Manufacturing, 34(12), 1327–1347. https://doi.org/10.1080/0951192x.2021.1972460 ( reposiTUm)

Stojadinovic, S. M., Majstorovic, V. D., Gąska, A., Sładek, J., & Durakbasa, N. M. (2021). Development of a Coordinate Measuring Machine-Based Inspection Planning System for Industry 4.0. Applied Sciences, 11(18), 8411. https://doi.org/10.3390/app11188411 ( reposiTUm)

Adamczak, S., Wrzochal, M., & Durakbasa, N. (2020). Evaluation of a Non-Contact Method for Measuring Vibration of Rolling Bearings in Industrial Conditions. Mechanik, 93(2), 8–11. https://doi.org/10.17814/mechanik.2020.2.5 ( reposiTUm)

Stojadinovic, S. M., Majstorovic, V. D., & Durakbasa, N. M. (2020). Toward a cyber-physical manufacturing metrology model for industry 4.0. Artificial Intelligence for Engineering Design, Analysis and Manufacturing, 35(1), 20–36. https://doi.org/10.1017/s0890060420000347 ( reposiTUm)

Stojadinović, S., Durakbasa, N., & Živanović, S. (2020). An Optimized and Virtual on-Machine Measurement Planning Model. FME Transactions, 48(4), 745–752. https://doi.org/10.5937/fme2004745s ( reposiTUm)

Vanli, A. S., Akdogan, A., & Durakbasa, M. N. (2018). Process Optimization and Surface Modification of Die Casting AZ91 Magnesium Alloy Products. Acta Physica Polonica A, 134(1), 32–36. https://doi.org/10.12693/aphyspola.134.32 ( reposiTUm)

Cavusoglu, I., Durakbasa, M. N., & Cakir, M. (2018). The Effects of Drilling Operation on the Surface Roughness of Modified GFRP Composites. Acta Physica Polonica A, 134(1), 339–341. https://doi.org/10.12693/aphyspola.134.339 ( reposiTUm)

Bulutsuz, A. G., Yurci, M. E., & Durakbaşa, N. (2018). Optimization Process Parameters of Equal Angular Channel Pressing According to the Measurement Results of Microstructural Homogeneity. Materials Research, 21(6). https://doi.org/10.1590/1980-5373-mr-2018-0270 ( reposiTUm)

Adamczak, S., Świderski, J., Dobrowolski, T., & Durakbasa, N. (2018). Application of MSA analysis for the evaluation of instruments for measuring the surface texture. Mechanik, 91(5–6), 434–436. https://doi.org/10.17814/mechanik.2018.5-6.54 ( reposiTUm)

Vanli, S., Akdogan, A., Kerber, K., Özbek, S., & Durakbasa, M. N. (2018). Smart Die Casting Foundry According To Industrial Revolution 4.0. Acta Technica Napocensis. Series Applied Mathematics, Mechanics, and Engineering, 1(Vol. 61,IV), 787–792. http://hdl.handle.net/20.500.12708/145966 ( reposiTUm)

Pop, G. M., Crisan, L., Tripa, M., & Durakbasa, M. N. (2018). Iso Checker, An Android Application For Fit Calculation According To The Latest Iso Gps Standards. Acta Technica Napocensis. Series Applied Mathematics, Mechanics, and Engineering, 1(Vol. 61,IV), 781–786. http://hdl.handle.net/20.500.12708/145967 ( reposiTUm)

Vrabel, M., Durakbasa, M. N., Kovac, P., & Mankova, I. (2017). Contribution to the FEM simulation of Ti6Al4V Machining. Acta Mechanica Slovaca, 1(Volume 21 No.1/2017), 54–60. http://hdl.handle.net/20.500.12708/146982 ( reposiTUm)

Durakbasa, M. N. (2017). Advanced Metrology and Intelligent Quality Automation for Industry 4.0-Based Precision Manufacturing Systems. Solid State Phenomena, 261, 432–439. https://doi.org/10.4028/www.scientific.net/ssp.261.432 ( reposiTUm)

Vrabel’, M., Maňková, I., & Durakbasa, N. M. (2017). Effect of Honing Parameters on Generated Surface Quality of Cylinder Liner within Automotive Engine Production. Solid State Phenomena, 261, 189–194. https://doi.org/10.4028/www.scientific.net/ssp.261.189 ( reposiTUm)

Cavusoglu, I., Durakbasa, M. N., & Cakir, M. (2017). Analysis of Surface Modification of GFRP and Influence on the Drilled Part Delamination. Acta Physica Polonica A, 131(3), 423–427. https://doi.org/10.12693/aphyspola.131.423 ( reposiTUm)

Marek, M., Novak, M., Rytina, T., & Durakbasa, M. N. (2017). Process and Equipment Improvement for Nickel Brush Plating Applications. Manufacturing Technology, 1(Vol. 17, No.4), 503–507. http://hdl.handle.net/20.500.12708/147527 ( reposiTUm)

Marek, M., Novak, M., Holesovský, F., Durakbasa, M. N., & Walcher, E. M. (2017). The Effect of Changes to Nickel Coating Machine on Surface Integrity and Microstructure after Grinding. Manufacturing Technology, 1(Vol. 17, No. 6), 906–912. http://hdl.handle.net/20.500.12708/147802 ( reposiTUm)

Majstorovic, V., & Durakbasa, N. M. (2016). Guest editorial. TQM Journal, 28(5). https://doi.org/10.1108/tqm-05-2016-0046 ( reposiTUm)

Balta, B., Solak, A., Erk, O., & Durakbasa, M. N. (2016). A response surface approach to heavy duty truck rear underrun protection device beam optimisation. International Journal of Vehicle Design, 1(Volume 71,1), 3–30. http://hdl.handle.net/20.500.12708/148928 ( reposiTUm)

Durakbasa, N. M. (2016). Micro- and nano-scale manufacturing development through precision metrology. The TQM Journal, 28(5), 685–703. https://doi.org/10.1108/tqm-11-2015-0135 ( reposiTUm)

Stojadinovic, S. M., Majstorovic, V. D., Durakbasa, N. M., & Sibalija, T. V. (2016). Towards an Intelligent Approach for CMM Inspection Planning of Prismatic Parts. Measurement, 92, 326–339. https://doi.org/10.1016/j.measurement.2016.06.037 ( reposiTUm)

Sagbas, B., & Durakbasa, M. N. (2016). Third-Body Wear Behavior of Orthopedic Biopolymers. International Journal of Mining, Materials and Metallurgical Engineering (IJMMME), 1(Volume 2), 1–7. http://hdl.handle.net/20.500.12708/149947 ( reposiTUm)

Stojadinovic, S., Majstorovic, V. D., Durakbasa, M. N., & Sibalija, T. (2016). Ants Colony Optimisation Of A Measuring Path Of Prismatic Parts On A Cmm. Metrology And Measurement Systems, 23(1), 119–132. http://hdl.handle.net/20.500.12708/148458 ( reposiTUm)

Majstorovic, V., Stojadinovic, S., & Durakbasa, M. N. (2016). Path Planning For Inspection Prismatic Parts On Cmm As A Part Of Cyber - Physical Manufacturing Metrology Model. Journal Proceedings in Manufacturing Systems [Proc in MS], 1(Volume 111), 3–8. http://hdl.handle.net/20.500.12708/148542 ( reposiTUm)

Durakbasa, N. M., Bauer, J. M., Bas, G., & Kräuter, L. (2016). Novel Trends in the Development of Autonomation and Robotics in Metrology for Production in the Future. IFAC-PapersOnLine, 49(29), 6–11. https://doi.org/10.1016/j.ifacol.2016.11.057 ( reposiTUm)

Durakbasa, M. N., Bauer, J. M., Alcoberro, R., & Capuano, E. (2016). A Computer-Simulated Environment for Modeling and Dynamic- Behavior-Analysis of Special Brushless Motors for Mechatronic Mobile Robotics Systems. IFAC-PapersOnLine, 49(29), 12–17. https://doi.org/10.1016/j.ifacol.2016.11.060 ( reposiTUm)

Yurci, C., Akdogan, A., & Durakbasa, M. N. (2016). Investigation of Effects (Welding Sequence, Fixturing, Welding Points) on Distortions after Spot Welding for Determining Individual and Cumulative Tolerances. IFAC-PapersOnLine, 49(29), 30–35. https://doi.org/10.1016/j.ifacol.2016.11.066 ( reposiTUm)

Cakmakci, M., Durakbasa, M. N., Karasu, M. K., Bas, G., & Gurel, U. (2015). The importance of quality control within the relationship between the quality engineering and Taguchi methodology. Key Engineering Materials, 637, 27–35. https://doi.org/10.4028/www.scientific.net/kem.637.27 ( reposiTUm)

Durakbasa, M. N., Akdogan, A., Vanli, A. S., & Bulutsuz, A. G. (2015). Optimization of end milling parameters and determination of the effects of edge profile for high surface quality of AISI H13 steel by using precise and fast measurements. Measurement, 68, 92–99. https://doi.org/10.1016/j.measurement.2015.02.042 ( reposiTUm)

Durakbasa, M. N., Bas, G., Bauer, J. M., & Kräuter, L. (2015). Ein intelligentes, vernetztes präzisionsmesstechnisches Konzept als strategischer Ansatz im Forschungs- und Industriebereich. Technisches Messen, 82(1), 7–15. https://doi.org/10.1515/teme-2014-0019 ( reposiTUm)

Durakbasa, M. N., Bas, G., Bauer, J. M., & Riepl, D. (2015). A Model of Global Cooperation to Enable Intelligent Metrology Applications by Means of an Integrated Teleoperation System. International Journal of Online and Biomedical Engineering (IJOE), 11(3), 14. https://doi.org/10.3991/ijoe.v11i3.4545 ( reposiTUm)

Günay Bulutsuz, A., Yetilmezsoy, K., & Durakbasa, M. N. (2015). Application of fuzzy logic methodology for predicting dynamic measurement errors related to process parameters of coordinate measuring machines. Journal of Intelligent & Fuzzy Systems, 1(Preprint), 1–15. http://hdl.handle.net/20.500.12708/151116 ( reposiTUm)

Durakbasa, M. N. (2015). Development Of Improved Techniques For New Levels Of Manufacturing Precision With The Micro- And Nano-Components. International Journal Advanced Quality, VOL. 43(1), 1–4. http://hdl.handle.net/20.500.12708/151794 ( reposiTUm)

Bauer, J. M., Durakbasa, M. N., Bas, G., Güclü, E., & Kopacek, P. (2015). Telepresence in Education. IFAC-PapersOnLine, 48(24), 178–182. https://doi.org/10.1016/j.ifacol.2015.12.079 ( reposiTUm)

Bauer, J. M., Bas, G., Durakbasa, N. M., & Kopacek, P. (2015). Development Trends in Automation and Metrology. IFAC-PapersOnLine, 48(24), 168–172. https://doi.org/10.1016/j.ifacol.2015.12.077 ( reposiTUm)

Günay Bulutsuz, A., Demircioglu, P., Bogrekci, I., Durakbasa, M. N., & Katipoglu, B. A. (2015). Measurement and image processing evaluation of surface modifications of dental implants G4 pure titanium created by different techniques. AIP Conference Proceedings. https://doi.org/10.1063/1.4914215 ( reposiTUm)

Davutoglu, C., Durakbasa, M. N., Bas, G., & Güclü, E. (2014). Improved Quality and Reliability in Telecommunication Network Testing by means of a Remote Online Test System. International Journal of Online and Biomedical Engineering (IJOE), 10(4), 66. https://doi.org/10.3991/ijoe.v10i4.3830 ( reposiTUm)

Durakbasa, M. N., Akdogan, A., Vanli, A. S., & Günay, A. (2014). Surface Roughness Modeling with Edge Radius and End Milling Parameters on Al 7075 Alloy Using Taguchi and Regression Methods. ACTA IMEKO, 3(4), 46. https://doi.org/10.21014/acta_imeko.v3i4.148 ( reposiTUm)

Vanli, S., Günay, A., Akdogan, A., & Durakbasa, M. N. (2014). Optimum Process Parameters During End Milling Operation Of Aisi H13 Steel For High Surface Quality. Academic Journal of Science, 03(02), 233–240. http://hdl.handle.net/20.500.12708/157944 ( reposiTUm)

Balta, B., Erk, O., Solak, H. A., & Durakbasa, N. (2014). Pareto Optimization of Heavy Duty Truck Rear Underrun Protection Design for Regulative Load Cases. SAE International Journal of Commercial Vehicles, 7(2014-01–9027), 726–735. https://doi.org/10.4271/2014-01-9027 ( reposiTUm)

Durakbasa, M. N., Bas, G., Bauer, J. M., & Poszvek, G. (2014). Trends In Precision Manufacturing Based On Intelligent Design And Advanced Metrology. Key Engineering Materials, 581, 417–422. https://doi.org/10.4028/www.scientific.net/kem.581.417 ( reposiTUm)

Kandrac, L., Mankova, I., Vrabel, M., Beno, J., Stahovec, J., Durakbasa, M. N., & Bas, G. (2014). Statistical Analysis of Cutting Force, Temperature and Power of FEM Modeling when Machining Titanium Alloy. Applied Mechanics and Materials, 693, 358–363. https://doi.org/10.4028/www.scientific.net/amm.693.358 ( reposiTUm)

Durakbasa, M. N., & Bas, G. (2014). Key Metrology Roadmap in Advanced Manufacturing Technology of Micro-components and Nano-structures. International Journal of Mechanical Engineering and Automation, 1(6), 347–353. http://hdl.handle.net/20.500.12708/157468 ( reposiTUm)

Sagbas, B., & Durakbasa, M. N. (2014). Modelling and optimization of biotribological testing parameters on frictional heating of vitamin E blended UHMWPE with the help of statistical techniques. Measurement, 54, 249–255. https://doi.org/10.1016/j.measurement.2014.01.022 ( reposiTUm)

Sagbas, B., & Durakbasa, M. N. (2014). Surface Texturing of Vitamin E Blended UHMWPE for Reduction of Wear. Acta Physica Polonica A, 125(2), 481–483. https://doi.org/10.12693/aphyspola.125.481 ( reposiTUm)

Gunay, A., Sagbas, B., & Durakbasa, M. N. (2014). Importance of Measurement Parameters for the Dental Implant Surface Characterization. Acta Physica Polonica A, 125(2), 484–487. https://doi.org/10.12693/aphyspola.125.484 ( reposiTUm)

Hornikova, A., & Durakbasa, M. N. (2013). Industrial Engineering and Technology Development Supported by Statistical Methods. Economics and Informatics, 1(XI), 32–46. http://hdl.handle.net/20.500.12708/155996 ( reposiTUm)

Durakbasa, M. N., Bas, G., Bauer, J. M., & Poszvek, G. (2013). Intelligent Design and Advanced Metrology as Strategic Approaches to Efficiency and Quality Improvement in Smart Manufacturing. International Journal of Advanced Quality, VOL.41(1), 17–22. http://hdl.handle.net/20.500.12708/155248 ( reposiTUm)

Gunay, A., Fank, S., Gulmez, T., & Durakbasa, N. M. (2013). Calculation of measurement uncertainty for plastic (ABS) material in flexural testing. International Journal of Metrology and Quality Engineering, 4(1), 29–33. https://doi.org/10.1051/ijmqe/2012034 ( reposiTUm)

Sagbas, B., & Durakbasa, M. N. (2013). Effect of surface patterning on frictional heating of vitamin E blended UHMWPE. Wear, 303(1–2), 313–320. https://doi.org/10.1016/j.wear.2013.03.023 ( reposiTUm)

Demircioglu, P., Bogrekci, I., & Durakbasa, N. M. (2013). Micro scale surface texture characterization of technical structures by computer vision. Measurement, 46(6), 2022–2028. https://doi.org/10.1016/j.measurement.2013.02.012 ( reposiTUm)

Bogrekci, I., Durakbasa, M. N., & Demircioglu, P. (2013). Comparison between 3D Digital and Optical Microscopes for the Surface Measurement by Computer Vision. AT-AUTOMATISIERUNGSTECHNIK, 61(3), 195–202. https://doi.org/10.1524/auto.2013.0024 ( reposiTUm)

Sagbas, B., & Durakbasa, M. N. (2013). Evaluating Frictional Temperature Rise in Sliding Surface of Artificial Hip Joint Materials with Different Loading Conditions. Acta Physica Polonica A, 123(2), 453–455. https://doi.org/10.12693/aphyspola.123.453 ( reposiTUm)

Ates, S. A., & Durakbasa, N. M. (2012). Evaluation of corporate energy management practices of energy intensive industries in Turkey. Energy, 45(1), 81–91. https://doi.org/10.1016/j.energy.2012.03.032 ( reposiTUm)

Durakbasa, M. N., Bogrekci, I., Demircioglu, P., Bas, G., & Günay, A. (2012). Surface characterization by accurate measurement and image processing systems on machined surfaces of precision cutting tools. JAMRIS - Journal of Automation, Mobile Robotics & Intelligent Systems, 6(03), 51–56. http://hdl.handle.net/20.500.12708/164047 ( reposiTUm)

Durakbasa, M. N., Demircioglu, P., Bogrekci, I., Bas, G., & Gunay, A. (2012). Assessment of machining with uncoated and coated end mills and determining surface topography using 2D fast Fourier transform. International Journal of Nanomanufacturing, 8(5/6), 493. https://doi.org/10.1504/ijnm.2012.051108 ( reposiTUm)

Yurci, C., Gunay Bulutsuz, A., & Durakbasa, M. N. (2012). Performance Determination and Calibration of CMMs on the Basis of GPS Standards. Quality-Access to Success, VOL.13, S5, NOVEMBER 2012, 291–298. http://hdl.handle.net/20.500.12708/164798 ( reposiTUm)

Demircioglu, P., Durakbasa, M. N., & Tan, O. (2012). A Comparison Between Contact Type Profilometer and Different D Optical Techniques: A Case Study in Characterization of Machined Surface Structures. Quality-Access to Success, VOL.13, S5, NOVEMBER 2012, 117–122. http://hdl.handle.net/20.500.12708/164779 ( reposiTUm)

Bauer, J. M., Durakbasa, M. N., & Bas, G. (2012). Multi Functional Intelligent Measurement Robot, As a Part of a Global Quality Management System for Collaboration Between Small, Medium and Large Scale Enterprises. Quality-Access to Success, VOL.13, S5, NOVEMBER 2012(ISSN: 1582-2559), 67–72. http://hdl.handle.net/20.500.12708/164764 ( reposiTUm)

Durakbasa, M. N., Osanna, P. H., & Bas, G. (2012). Intelligent Design and Advanced Metrology to Support and Improve Integrated Management Systems for Quality, Environment and Energy in Production Engineering. Quality-Access to Success, VOL.13, S5, NOVEMBER 2012, 17–22. http://hdl.handle.net/20.500.12708/164774 ( reposiTUm)

Durakbasa, M. N., Bauer, J. M., Bas, G., & Riepl, D. (2012). Telepresence and Teleoperation in Work Concept of Multifunctional Intelligent Factories: Experience of Telepresence in the Micro and Nano Metrology Laboratory AuM-TU-Wien. Quality-Access to Success, VOL.13, S5, NOVEMBER 2012, 131–136. http://hdl.handle.net/20.500.12708/164776 ( reposiTUm)

Durakbasa, M. N., Yurci, M. E., Akdogan, A., & Yildirim, S. B. (2012). Surface Roughness Measurement Uncertainties Both in Tactile and Optical Instruments. Quality-Access to Success, VOL.13, S5, NOVEMBER 2012, 137–140. http://hdl.handle.net/20.500.12708/164783 ( reposiTUm)

Koyun, A., Yurci, M. E., Sagbas, B., & Durakbasa, M. N. (2012). Evaluation of temperature rise within articulating surfaces of artificial hip joint materials. Quality-Access to Success, VOL.13, S5, NOVEMBER 2012, 379–384. http://hdl.handle.net/20.500.12708/164902 ( reposiTUm)

Coskun, D., Demircioglu, P., Bogrekci, I., & Durakbasa, M. N. (2012). Electrodynamical considerations in r-t measurements of high Tc bulk superconductivity: an inexpensive set up design. Quality-Access to Success, VOL.13, S5, NOVEMBER 2012, 325–332. http://hdl.handle.net/20.500.12708/164901 ( reposiTUm)

Durakbasa, M. N., Osanna, P. H., Bas, G., Demircioglu, P., Cakmakci, M., & Hornikova, A. (2012). Novel Developments in Dimensional Nanometrology in the Context of Geometrical Product Specifications and Verification (GPS). JAMRIS - Journal of Automation, Mobile Robotics & Intelligent Systems, 6(02), 22–25. http://hdl.handle.net/20.500.12708/163555 ( reposiTUm)

Durakbasa, M. N., Osanna, P. H., & Bas, G. (2012). Advanced Management Systems for Quality, Energy and Environment for Efficiency Enhancement of Modern Manufacturing Industries. International Journal Advanced Quality, VOL.40/2/BELGRADE(UDC 658.5), 11–19. http://hdl.handle.net/20.500.12708/163619 ( reposiTUm)

Cakmakci, M., Ortabas-Demirel, N., Durakbasa, M. N., Bas, G., & Hornikova, A. (2012). Interaction Between Capability Indices and Skewness of Non-Normal Processes Using Quantile Based Estimation and Johnson Transformation. Quality-Access to Success, VOL. 13, S5, NOVEMBER 2012, 79–86. http://hdl.handle.net/20.500.12708/164155 ( reposiTUm)

Durakbasa, M. N., Osanna, P. H., Bauer, J. M., & Bas, G. (2012). Innovation In Production Metrology For Precision Engineering And To Support Sustainability And Improvement Of Process And Product Quality In Modern Manufacturing Industry. Management of Sustainable Development Journal, 4(1), 5–11. http://hdl.handle.net/20.500.12708/164286 ( reposiTUm)

Sagbas, B., & Durakbasa, M. N. (2012). Measurement of Wear in Orthopedic Prosthesis. Acta Physica Polonica A, 1(Vol. 121, No. 1), 4. http://hdl.handle.net/20.500.12708/163222 ( reposiTUm)

Durakbasa, M. N., Bas, G., Osanna, P. H., & Bauer, J. M. (2011). Sustainable Management Systems of Quality, Energy and Environment in Industry / Sisteme durabile de management al calitãtii, energiei si mediului în industrie. Quality - Access to Success, ANUL 12(4), 21–25. http://hdl.handle.net/20.500.12708/161702 ( reposiTUm)

Durakbasa, M. N., & Osanna, P. H. (2011). Intelligent Tolerancing And Advanced Metrology To Support Total Quality Management And Modern Industrial Fabrication. International Journal "Total Quality Management & Excellence", 1, VOL.39(UDK 658.5), 27–31. http://hdl.handle.net/20.500.12708/162296 ( reposiTUm)

Durakbasa, M. N., Osanna, P. H., & Demircioglu, P. (2011). The Factors Affecting Surface Roughness Measurements of the Machined Flat and Spherical Surface Structures - The Geometry and the Precision of the Surface. Measurement, 44(10), 1986–1999. https://doi.org/10.1016/j.measurement.2011.08.020 ( reposiTUm)

Durakbasa, N., Bauer, J., Verrastro, C., Riepl, D., & Ferradás, E. (2011). Robot Autónomo Especial MFI-MR, en el Marco de Sistemas Globales de Gestión de la Calidad y Entornos de de Colaboración entre Pequeñas y Medianas Empresas. Iberoamerican Journal of Industrial Engineering, 3(6), 154–172. https://doi.org/10.13084/2175-8018.v03n06a10 ( reposiTUm)

Ates, S., & Durakbasa, M. N. (2011). Advanced Quality Approach For Energy Management. Research Journal of Economics, Business and ICT, RESEARCH JOURNAL OF ECONOMICS, BUSINESS AND ICT(Volume 4). http://hdl.handle.net/20.500.12708/163463 ( reposiTUm)

Durakbasa, M. N., Bas, G., & Özkan, Z. (2011). A New Strategy for Energy - A Proposal of an Energy Management Implementation Model for Productivity Enhancement within the Integrated Management Systems. Journal of the Institute of Management Services, 1(Volume 552), 28–30. http://hdl.handle.net/20.500.12708/163006 ( reposiTUm)

Durakbasa, M. N., & Osanna, P. H. (2011). Intelligent Design and Metrology for Higher Quality, Accuracy and Improving Production Efficiency. Acta Mechanica Slovaca, 15(1/2011), 6–10. http://hdl.handle.net/20.500.12708/163374 ( reposiTUm)

Demircioglu, P., & Durakbasa, M. N. (2011). Investigations on machined metal surfaces through the stylus type and optical 3D instruments and their mathematical modeling with the help of statistical techniques. Measurement, 44(4), 611–619. https://doi.org/10.1016/j.measurement.2010.12.001 ( reposiTUm)

Stout, K. J., Durakbasa, M. N., & Osanna, P. H. (2009). Quality assurance - Have we specified it the wrong way around? Wear, 266(5–6), 511–514. https://doi.org/10.1016/j.wear.2008.04.054 ( reposiTUm)

Osanna, P. H., Durakbasa, M. N., & Kräuter, L. (2009). Industrial Metrology of the Viewpoint of Nanotechnology and Nanometrology. Tehnika, 3(Vol.9), 9–16. http://hdl.handle.net/20.500.12708/165985 ( reposiTUm)

Osanna, P. H., Durakbasa, M. N., Crisan, L., & Bauer, J. M. (2009). The Management And Exchange Of Knowledge And Innovation In Environments Of Collaborating Small And Medium Sized Enterprises. Communications of the IBIMA (CIBIMA), Official Journal of the International Business Information Management Association, I(Vol.7), 130–136. http://hdl.handle.net/20.500.12708/166254 ( reposiTUm)

Akdogan, A. N., & Durakbasa, M. N. (2008). Thermal Cycling Experiments for Glass Moulds Surface Texture Lifetime Prediction - Evaluation with the Help of Statistical Techniques. Measurement, 41(6), 697–703. https://doi.org/10.1016/j.measurement.2007.10.006 ( reposiTUm)

Osanna, P. H., Durakbasa, M. N., & Kräuter, L. (2008). Industrial Metrology and Interchangeable Manufacturing under the Viewpoint of Nanotechnology and Nanometrology. Problems of Engineering Cybernetics and Robotics, I(59), 60–73. http://hdl.handle.net/20.500.12708/170498 ( reposiTUm)

Durakbasa, M. N., Osanna, P. H., Crisan, L., & Kräuter, L. (2008). The Analytic Description and Design of Workpiece Geometry for Mechanical Engineering. Journal for Technology of Plasticity, 33(UDK 621.7), 13–21. http://hdl.handle.net/20.500.12708/171169 ( reposiTUm)

Osanna, P. H., Durakbasa, M. N., & Kräuter, L. (2008). Modern Industrial Fabrication and Manufacturing on Basis of Computer Aided Economic Design, Construction, Production, Metrology and Quality Management. Academic Journal of Manufacturing Engineering, 6(4/2008), 97–101. http://hdl.handle.net/20.500.12708/171143 ( reposiTUm)

Lackner, F., Riegler, W., Osanna, P. H., & Durakbasa, M. N. (2008). High Precision Strain Gauge Based Sensor for Monitoring Suspension Forces at CERN. Measurement Science Review, 8(2), 46–49. http://hdl.handle.net/20.500.12708/171142 ( reposiTUm)

Durakbasa, M. N., Stout, K. J., Osanna, P. H., & Yurci, M. E. (2007). Function Dependent Quality Assurance in Modern Production Engineering. Manufactoring Engineering, VI(4), 88–90. http://hdl.handle.net/20.500.12708/170096 ( reposiTUm)

Afjehi-Sadat, A., Durakbasa, M. N., Osanna, P. H., Samarawickrama, D., & Stout, K. J. (2005). Quality Control in bio-medicine and bio-engineering through application of sophisticated production metrology. Elektronika, I(10), 46–50. http://hdl.handle.net/20.500.12708/174263 ( reposiTUm)

Durakbasa, M. N., Osanna, P. H., Afjehi-Sadat, A., Samarawickrama, D., & Krsek, A. (2005). Application of Sophisticated Production Metrology Nanometrology for Quality Control in Bio-Engineering. Measurement Science Review, SECTION 2(Volume 5), 1–10. http://hdl.handle.net/20.500.12708/174278 ( reposiTUm)

Osanna, P. H., Durakbasa, M. N., & Afjehi-Sadat, A. (2004). LIFE CYCLE ASSESSMENT AND MODERN METROLOGY FOR QUALITY MANAGEMENT SYSTEMS IN INDUSTRY. International Journal of Production Engineering and Computers, 6(7), 29–38. http://hdl.handle.net/20.500.12708/175195 ( reposiTUm)

Osanna, P. H., Durakbasa, M. N., & Afjehi-Sadat, A. (2004). Structure Measurement of Workpiece Surfaces at High Precision Machining. Manufacturing Technology, IV(IV), 68–74. http://hdl.handle.net/20.500.12708/175194 ( reposiTUm)

Durakbasa, M. N., & Osanna, P. H. (2003). Utilization of Co-ordinate Measurement Technique in Biomedicine to Evaluate the Shape of Non-Technical Structures. Measurement, 33(N.2), 157–161. http://hdl.handle.net/20.500.12708/175180 ( reposiTUm)

Durakbasa, M. N., & Osanna, P. H. (2003). Micro and Nano Metrology to Support Developmentsin Technology, Sustainability and Biomedicine. Academic Journal of Manufacturing Engineering, 1(2), 6–12. http://hdl.handle.net/20.500.12708/175177 ( reposiTUm)

Osanna, P. H., Slanar, G., & Durakbasa, N. M. (2003). Messtechnik als Grundlage für die Steigerung der Qualität und Umweltverträglichkeit technischer Produkte und Anlagen. Elektrotechnik Und Informationstechnik : E & i, 120(5), 143–148. https://doi.org/10.1007/bf03053932 ( reposiTUm)

Osanna, P. H., & Durakbasa, M. N. (2002). Trends in Metrology. Problems of Engineering Cybernetics and Robotics, 1(53), 15–24. http://hdl.handle.net/20.500.12708/175181 ( reposiTUm)

Durakbasa, M. N., Osanna, P. H., & Afjehi-Sadat, A. (2001). A general approach to workpiece characterization in the frame of GPS (Geometrical Product Specification and Verification. International Journal of Machine Tools and Manufacture, 41, 2147–2151. http://hdl.handle.net/20.500.12708/175197 ( reposiTUm)

Durakbasa, N. M. (2000). Koordinatenmesstechnik für biomedizinische Anwendungen. Elektrotechnik Und Informationstechnik : E & i, 117(4), 269–272. https://doi.org/10.1007/bf03158629 ( reposiTUm)

Durakbasa, M. N., & Osanna, P. H. (1998). Prüfmittelüberwachung und -verwaltung im Qualitäitsmanagement- leistungsfähig und flexibel durch Rechnereinsatz. Elektrotechnik Und Informationstechnik : E & i, 1(Heft 4), 207–212. http://hdl.handle.net/20.500.12708/175519 ( reposiTUm)

Durakbasa, M. N. (1997). Produktdatenaustausch mit Koordinatenmeßgeräten in der intelligenten Fertigungsumgebung. Elektrotechnik Und Informationstechnik : E & i, 114(4), 200–202. https://doi.org/10.1007/bf03158662 ( reposiTUm)

Durakbasa, M. N. (1995). Total Quality Management (TQM) und Meßtechnik in der rechnerintegrierten Produktion. Elektrotechnik Und Informationstechnik : E & i, 112. JG.(H. 4), 180–182. http://hdl.handle.net/20.500.12708/175521 ( reposiTUm)

Osanna, P. H., Rezaie, K., Durakbasa, N. M., & Heiss, C. P. (1995). Form measurements - A bridge between production metrology and biomechanics. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 35(2), 165–168. https://doi.org/10.1016/0890-6955(94)p2368-p ( reposiTUm)

Osanna, P. H., Durakbasa, N. M., & Vagszegi, I. G. (1988). Laser optical roughness measurement. Measurement, 6(1), 33–36. https://doi.org/10.1016/0263-2241(88)90036-x ( reposiTUm)

Beiträge in Tagungsbänden

Tica, D., Cosma, C., Bodur, O., Durakbasa, N. M., Grozav, S. D., Ceclan, V., Rehor, J., Sterca, D. A., & Walcher, E. M. (2023). Effects of Drag Finishing on a SLM-Manufactured Titanium Reconstruction Plate. In N. M. Durakbasa & G. M. Gencyilmaz (Eds.), Towards Industry 5.0 Selected Papers from ISPR2022, October 6–8, 2022, Antalya (pp. 462–472). Springer. https://doi.org/10.1007/978-3-031-24457-5_37 ( reposiTUm)

Cristian, L.-N., Bodur, O., Walcher, E. M., Grozav, S. D., Ceclan, V., Durakbasa, N. M., & Sterca, D.-A. (2023). Study of Improving Spur Gears with the Generative Design Method. In Towards Industry 5.0 Selected Papers from ISPR2022, October 6–8, 2022, Antalya (pp. 473–485). Springer. https://doi.org/10.1007/978-3-031-24457-5_38 ( reposiTUm)

Bodur, O., Walcher, E. M., Sterca, A., Sulz, C., Calin, R.-A., Durakbasa, N. M., & Bleicher, F. (2023). Porosity Examination of Additive Manufactured Parts and Effects of Infill Parameters. In R. Teti & D. M. D’Addona (Eds.), 16th CIRP Conference on Intelligent Computation in Manufacturing Engineering (pp. 643–648). Elsevier. https://doi.org/10.1016/j.procir.2023.06.110 ( reposiTUm)

Kovacs, M., Pacurar, R.-I., Grozav, S., Durakbasa, N. M., Bodur, O., Rehor, J., & Marik, T. (2023). Research on Mechanical Characteristics of Parts Made of 316L Stainless Steel (Material) by Using Selective Laser Melting Technology. In N. M. Durakbasa & M. G. Gençyılmaz (Eds.), Towards Industry 5.0: Selected Papers from ISPR2022, October 6–8, 2022, Antalya (pp. 176–187). Springer. https://doi.org/10.1007/978-3-031-24457-5_15 ( reposiTUm)

Buyuk, U., Akdogan, A., Vanli, A. S., & Durakbasa, N. (2021). Minimizing Coating Process Sourced Hydrogen Embrittlement of Fasteners. In B. Katalinic (Ed.), Proceedings of the 32nd International DAAAM Symposium 2021 (pp. 0508–0513). Proceedings of the 32nd International DAAAM Virtual Symposium / DAAAM International, Vienna, Austria, EU, 2021. https://doi.org/10.2507/32nd.daaam.proceedings.073 ( reposiTUm)

Alcoberro, R., Durakbasa, N., Bauer, J., & Kopacek, P. (2021). A low-cost integrated concept for the hybridisation and electric conversion of cars and other mechatronic vehicles. In 20th IFAC Conference on Technology, Culture, and International Stability TECIS 2021 (Vols. 54, 13, Issue 13, pp. 511–516). https://doi.org/10.1016/j.ifacol.2021.10.500 ( reposiTUm)

Bodur, O., Stepanek, V., Walcher, E. M., & Durakbasa, N. (2020). Precision in Additive Manufacturing, Optimization and Evaluation of the Accuracy of 3D Printer based on GPS System. In B. Katalinic (Ed.), DAAAM Proceedings (pp. 0963–0972). DAAAM International. https://doi.org/10.2507/31st.daaam.proceedings.134 ( reposiTUm)

Akdogan, A., Vanli, A. S., & Durakbasa, N. (2020). Effect of Gating System Improvements on Product Quality in High Pressure Die Casting. In B. Katalinic (Ed.), DAAAM Proceedings (pp. 0459–0462). DAAAM International. https://doi.org/10.2507/31st.daaam.proceedings.064 ( reposiTUm)

Kopacek, P., & Doyle Kent, M. (2020). Do We Need Synchronization of the Human and Robotics to Make Industry 5.0 a Success Story? In M. N. Durakbasa (Ed.), Digital Conversion on the Way to Industry 4.0 (pp. 302–311). Springer Nature Switzerland AG. https://doi.org/10.1007/978-3-030-62784-3_25 ( reposiTUm)

Yurci, C., & Durakbasa, M. N. (2020). The Importance of CT in Industry 4.0 by Supplying Quality and GPS Standards for Several Production Methods Such as Additive Manufacturing. In Proceedings of 5th International Conference on the Industry 4.0 Model for Advanced Manufacturing (pp. 80–91). Springer Nature Switzerland AG. https://doi.org/10.1007/978-3-030-46212-3_5 ( reposiTUm)

Schumacher, A., Schumacher, C., & Sihn, W. (2020). Industry 4.0 Operationalization based on an Integrated Framework of Industrial Digitalization and Automation. In N. M. Durakbasa & M. G. Gençyılmaz (Eds.), Proceedings of the International Symposium for Production Research 2019 (pp. 301–310). Springer Nature Switzerland AG. https://doi.org/10.1007/978-3-030-31343-2_26 ( reposiTUm)

Drégelyi-Kiss, Á., & Durakbasa, M. N. (2019). Measurement Error on the Reconstruction Step in Case of Industrial Computed Tomograph. In M. N. Durakbasa & G. Gencyilmaz (Eds.), Proceedings of the International Symposium for Production Research 2018 (pp. 309–323). Springer International Publishing AG. http://hdl.handle.net/20.500.12708/176331 ( reposiTUm)

Folkvord, F., Peschke, L., Bas, G., Vitiello, S., & Spunda, N. (2019). Peer Learning Methodology for Sustainable Energy Usage. In M. N. Durakbasa & G. Gencyilmaz (Eds.), Proceedings of the International Symposium for Production Research 2019, Lecture Notes in Mechanical Engineering book series (LNME) (pp. 62–76). Springer Nature Switzerland AG. http://hdl.handle.net/20.500.12708/176355 ( reposiTUm)

Sagbas, B., Boyaci, T. H., & Durakbasa, M. N. (2019). Precision Metrology for Additive Manufacturing. In N. M. Durakbasa & M. G. Gençyılmaz (Eds.), Proceedings of the International Symposium for Production Research 2018 (pp. 309–323). Springer Nature Switzerland AG. https://doi.org/10.1007/978-3-319-92267-6_27 ( reposiTUm)

Demircioglu, P., Bogrekci, I., Durakbasa, M. N., Demir, N., & Kose, U. (2019). Surface Topological Investigation of Seal Bushing by Using Chromium PlatingProcess. In V. D. Majstorovic & N. M. Durakbasa (Eds.), Proceedings of the 12th International Conference on Measurement and Quality Control - Cyber Physical Issue, IMEKO TC 14 2019 (pp. 98–106). Springer Nature Switzerland AG. https://doi.org/10.1007/978-3-030-18177-2_10 ( reposiTUm)

Yurci, C., Akdogan, A., & Durakbasa, M. N. (2019). Determination of Resistance Spot Welding Parameters to Guarantee Certain Strength Values Including Regression Analysis. In V. D. Majstorovic & N. M. Durakbasa (Eds.), Proceedings of the 12th International Conference on Measurement and Quality Control - Cyber Physical Issue, IMEKO TC 14 2019 (pp. 62–73). Springer Nature Switzerland AG. https://doi.org/10.1007/978-3-030-18177-2_6 ( reposiTUm)

Durakbasa, M. N. (2019). Industrie 4.0: Integrated Solutions using Advanced Production and Metrology Technologies. In 39. Operations Research / Industrial Engineering National Congress - Operations Research and Industrial Engineering in Healthcare Systems (pp. 7–8). http://hdl.handle.net/20.500.12708/68130 ( reposiTUm)

Durakbasa, M. N., & Bas, G. (2019). From Nano- to Pico- to Femto-: Future Challenges for Cost-Oriented Manufacturing. In 19th IFAC Conference on Technology, Culture and International Stability TECIS 2019 (Vols. 52, 25, Issue 25, pp. 382–386). https://doi.org/10.1016/j.ifacol.2019.12.557 ( reposiTUm)

Şen, K. Ö., Durakbasa, M. N., Baş, G., Şen, G., & Akçatepe, O. (2019). An Implementation of Cloud Based Simulation in Production. In N. M. Durakbasa & M. G. Gençyılmaz (Eds.), Proceedings of the International Symposium for Production Research 2019 (pp. 519–524). Springer Nature Switzerland AG. https://doi.org/10.1007/978-3-030-31343-2_45 ( reposiTUm)

Vanli, S., Nomak Akdogan, A., & Durakbasa, M. N. (2019). Tools of Industry 4.0 on Die Casting Production Systems. In N. M. Durakbasa & M. G. Gençyılmaz (Eds.), Proceedings of the International Symposium for Production Research 2019 (pp. 328–334). Springer Nature Switzerland AG. https://doi.org/10.1007/978-3-030-31343-2_29 ( reposiTUm)

Pucher, E., Gruber, A., Eidmann, A., & Spitzwieser, C. (2019). Periodical Technical Emission Control by Using an IoT Universal Short-Test Procedure. In N. M. Durakbasa & M. G. Gençyılmaz (Eds.), Proceedings of the International Symposium for Production Research 2019 (pp. 157–168). Springer Nature Switzerland AG. https://doi.org/10.1007/978-3-030-31343-2_14 ( reposiTUm)

Durakbasa, M. N., Bauer, J. M., Capuano, E., Acosta, J. M., & Diaz, J. C. (2019). The New Paradigm in the Task of Direction-Coordination of Innovative Technological Projects in the Environment of INDUSTRY 4.0. In N. M. Durakbasa & M. G. Gençyılmaz (Eds.), Proceedings of the International Symposium for Production Research 2019 (pp. 311–318). Springer Nature Switzerland AG. https://doi.org/10.1007/978-3-030-31343-2_27 ( reposiTUm)

Bögrekci, I., Demircioglu, P., Sucuoglu, H. S., Guven, E., Demir, N., & Durakbasa, M. N. (2019). Structural and Modal Analyses of Naca 66-206 Aircraft Wing Model. In N. M. Durakbasa & M. G. Gençyılmaz (Eds.), Proceedings of the International Symposium for Production Research 2019 (pp. 182–191). Springer Nature Switzerland AG. https://doi.org/10.1007/978-3-030-31343-2_16 ( reposiTUm)

Sagbas, B., & Durakbasa, M. N. (2019). Industrial Computed Tomography for Nondestructive Inspection of Additive Manufactured Parts. In N. M. Durakbasa & M. G. Gençyılmaz (Eds.), Proceedings of the International Symposium for Production Research 2019 (pp. 481–490). Springer Nature Switzerland AG. https://doi.org/10.1007/978-3-030-31343-2_42 ( reposiTUm)

Kopacek, P., & Doyle-Kent, M. (2019). Industry 5.0: Is the Manufacturing Industry on the Cusp of a New Revolution? In N. M. Durakbasa & M. G. Gençyılmaz (Eds.), Proceedings of the International Symposium for Production Research 2019 (pp. 432–441). Springer Nature Switzerland AG. https://doi.org/10.1007/978-3-030-31343-2_38 ( reposiTUm)

Ugur Tuncer, G., Davutoglu, C., & Durakbasa, M. N. (2019). Automated Quality Assurance Applications in the Rise of IoT. In N. M. Durakbasa & M. G. Gençyılmaz (Eds.), Proceedings of the International Symposium for Production Research 2019 (pp. 361–368). Springer Nature Switzerland AG. https://doi.org/10.1007/978-3-030-31343-2_32 ( reposiTUm)

Akdogan, A., VANLI, A. S., & Durakbasa, M. N. (2019). Re-engineering of Manufacturing Parts by Computed Tomography Data. In V. Majstorovic & M. N. Durakbasa (Eds.), Proceedings of the 12th International Conference on Measurement and Quality Control - Cyber Physical Issue (pp. 114–121). Springer International Publishing AG. https://doi.org/10.1007/978-3-030-18177-2_12 ( reposiTUm)

Durakbasa, M. N., Demircioglu, P., Bauer, J. M., Bögrekci, I., Bas, G., Bodur, O., & Poszvek, G. (2019). Additive Miniaturized-Manufactured Gear Parts Validated by Various Measuring Methods. In V. Majstorovic & N. M. Durakbasa (Eds.), Proceedings of the 12th International Conference on Measurement and Quality Control - Cyber Physical Issue (pp. 276–290). Springer International Publishing AG. https://doi.org/10.1007/978-3-030-18177-2_25 ( reposiTUm)

Sagbas, B., & Durakbasa, N. M. (2019). Profile and Areal Surface Characterization of Additive Manufacturing Polymer and Metal Parts. In V. Majstorovic & N. M. Durakbasa (Eds.), Proceedings of the 12th International Conference on Measurement and Quality Control - Cyber Physical Issue (pp. 240–246). Springer International Publishing. https://doi.org/10.1007/978-3-030-18177-2_22 ( reposiTUm)

Majstorovic, V., Durakbasa, M. N., Takaya, Y., & Stojadinovic, S. (2019). Advanced Manufacturing Metrology in Context of Industry 4.0 Model. In V. Majstorovic & M. N. Durakbasa (Eds.), Proceedings of the 12th International Conference on Measurement and Quality Control - Cyber Physical Issue (pp. 1–11). Springer International Publishing AG. https://doi.org/10.1007/978-3-030-18177-2_1 ( reposiTUm)

Durakbasa, M. N., Bauer, J. M., Bodur, O., & Poszvek, G. (2019). Challenges of Miniaturizing a Precision Gear. In N. M. Durakbasa & M. G. Gençyılmaz (Eds.), Proceedings of the International Symposium for Production Research 2018 (pp. 239–253). Springer Nature Switzerland AG. https://doi.org/10.1007/978-3-319-92267-6_21 ( reposiTUm)

Sokac, M., Santosi, Z., Vukelic, D., Katic, M., Durakbasa, M. N., & Budak, I. (2019). Enhancement of Images from Industrial X-Ray Computed Tomography Systems by Hybrid Approach. In N. M. Durakbasa & M. G. Gençyılmaz (Eds.), Proceedings of the International Symposium for Production Research 2019 (pp. 138–146). Springer Nature Switzerland AG. https://doi.org/10.1007/978-3-030-31343-2_12 ( reposiTUm)

Nausch, M., Schumacher, A., & Sihn, W. (2019). Assessment of Organizational Capability for Data Utilization - A Readiness Model in the Context of Industry 4.0. In N. M. Durakbasa & M. G. Gençyılmaz (Eds.), Proceedings of the International Symposium for Production Research 2019 (pp. 243–252). Springer Nature Switzerland AG. https://doi.org/10.1007/978-3-030-31343-2_21 ( reposiTUm)

Pucher, E., Gruber, A., Innerkofler, M., & Buhmann, M. (2018). Performance Analysis of Vehicle-Specific Methods and Sensors for Autonomous Vehicles. In N. M. Durakbasa & M. G. Gençyılmaz (Eds.), Proceedings of the International Symposium for Production Research 2018 (pp. 451–463). Springer Nature Switzerland AG. https://doi.org/10.1007/978-3-319-92267-6_39 ( reposiTUm)

Blecha, P., Durakbasa, M. N., & Holub, M. (2018). Digitized Production - Its Potentials and Hazards. In N. M. Durakbasa & M. G. Gençyılmaz (Eds.), Proceedings of the International Symposium for Production Research 2018 (pp. 402–411). Springer Nature Switzerland AG. https://doi.org/10.1007/978-3-319-92267-6_35 ( reposiTUm)

Durakbasa, M. N. (2018). Geometrical Product Specification. In Proceedings of the 12th International Conference on Measurement and Quality Control - Cyber Physical Issue, IMEKO TC 14 2019 - Lecture Notes in Mechanical Engineering (LNME) (pp. 10–20). Springer International Publishing AG. http://hdl.handle.net/20.500.12708/176343 ( reposiTUm)

Durakbasa, N. M., Bauer, J. M., Bas, G., & Kräuter, L. (2018). Towards a sophisticated approach to cost oriented automation and intelligent metrology in the advanced manufacturing. In 18th IFAC Conference on Technology, Culture and International Stability TECIS 2018 (Vols. 51, 30, Issue 30, pp. 54–59). https://doi.org/10.1016/j.ifacol.2018.11.245 ( reposiTUm)

Durakbasa, N., Bas, G., & Bauer, J. (2018). Implementing Education Vision in the Context of Industry 4.0. In XXIII International Conference on Manufacturing (Manufacturing 2018)7–8 June 2018, Kecskemét, Hungary (Vol. 448). https://doi.org/10.1088/1757-899x/448/1/012045 ( reposiTUm)

Sen, Ö., Durakbasa, M. N., Baysal, M. V., Sen, G., & Bas, G. (2018). Smart Factories: A Review of Situation, and Recommendations to Accelerate the Evolution Process. In N. M. Durakbasa & M. G. Gençyılmaz (Eds.), Proceedings of the International Symposium for Production Research 2018 (pp. 464–479). Springer Nature Switzerland AG. https://doi.org/10.1007/978-3-319-92267-6_40 ( reposiTUm)

Bauer, A., Bas, G., Durakbasa, M. N., Kräuter, L., & Ugur-Tüncer, G. (2018). Measurement Technology & Quality & Justicia in Industry 4.0. In N. M. Durakbasa & M. G. Gençyılmaz (Eds.), Proceedings of the International Symposium for Production Research 2018 (pp. 438–450). Springer Nature Switzerland AG. https://doi.org/10.1007/978-3-319-92267-6_38 ( reposiTUm)

Bas, G., Pirker, W., Kräuter, L., Güclü, E., & Durakbasa, L. (2018). Developments in Biomedical Techniques Through Digital Transformation of Industry 4.0 - Applications in Tissue and Dental Implants. In N. M. Durakbasa & M. G. Gençyılmaz (Eds.), Proceedings of the International Symposium for Production Research 2018 (pp. 391–401). Springer Nature Switzerland AG. https://doi.org/10.1007/978-3-319-92267-6_34 ( reposiTUm)

Durakbasa, M. N., Bauer, J. M., Kräuter, L., Bas, G., & Poszvek, G. (2018). Intelligent Integrated Management and Advanced Metrology for Quality Toward the Factory of the Future. In J. Ni, V. Majstorovic, & D. Djurdjanovic (Eds.), Proceedings of 3rd International Conference on the Industry 4.0 Model for Advanced Manufacturing (pp. 98–108). Springer. https://doi.org/10.1007/978-3-319-89563-5_7 ( reposiTUm)

Kralik, M., Bachraty, M., Pokusova, M., & Durakbasa, N. (2017). Measuring of Friction Factor of Cutting Environment. In B. Katalinic (Ed.), DAAAM Proceedings (pp. 0118–0123). DAAAM International. https://doi.org/10.2507/28th.daaam.proceedings.015 ( reposiTUm)

Cavusoglu, I., Poszvek, G., & Durakbasa, M. N. (2017). "Integration of Manufacturing Processes of New Generation Materials into Industrie 4.0. In INTERNATIONAL SYMPOSIUM FOR PRODUCTION RESEARCH 2017 “Transition to Industry 4.” (pp. 129–138). Caglayan Kitabevi ve Egitim Cozumleri Ticaret A.S. http://hdl.handle.net/20.500.12708/67662 ( reposiTUm)

Stojadinovic, S., Majstorovic, V., & Durakbasa, M. N. (2017). An Advanced CAI Model for Inspection Planning on CMM. In V. Majstorovic & Z. Jakovljevic (Eds.), Proceedings of 5th International Conference on Advanced Manufacturing Engineering and Technologies (pp. 57–65). Springer International Publishing AG. https://doi.org/10.1007/978-3-319-56430-2_5 ( reposiTUm)

Cavusoglu, I., Cakir, M., Durakbasa, M. N., & Walcher, E. M. (2016). The Optimization Of Drilling Parameters Of Glass Fiber Reinforced Plastics Via Taguchi Method. In MultiScience - XXX. microCAD International Multidisciplinary Scientific Conference (p. 9). Miskolci Egyetem. http://hdl.handle.net/20.500.12708/67397 ( reposiTUm)

Durakbasa, M. N., Bauer, J. M., Kräuter, L., & Bas, G. (2016). Novel Developments In Advanced Manufacturing And Multi Functional Intelligent Factories (mfif) Towards Production In The Future - Challenges Of Autonomation In Industry 4.0. In D. Popescu (Ed.), PROCEEDINGS Capturing Dynamics of Production Networks: Combining Agility, Innovation and Quality (pp. 388–394). Technical University Of Cluj-Napoca. http://hdl.handle.net/20.500.12708/67429 ( reposiTUm)

Vanli, S., Akdogan, A., & Durakbasa, M. N. (2016). Integrated Die Casting Manufacturing System For Sustainable High Quality Of Magnesium Alloy Products. In D. Popescu (Ed.), PROCEEDINGS Capturing Dynamics of Production Networks: Combining Agility, Innovation and Quality (pp. 43–46). Technical University Of Cluj-Napoca. http://hdl.handle.net/20.500.12708/67430 ( reposiTUm)

Demircioglu, P., Bogrekci, I., & Durakbasa, M. N. (2016). Image Processing Techniques for Surface Engineering. In D. Popescu (Ed.), PROCEEDINGS Capturing Dynamics of Production Networks: Combining Agility, Innovation and Quality (pp. 399–402). UTPRES. http://hdl.handle.net/20.500.12708/67578 ( reposiTUm)

Bas, G., Stoev, L., & Durakbasa, M. N. (2015). Assessment of the Production Quality in Machining by Integrating a System of High Precision Measurement. In B. Katalinic (Ed.), 25th DAAAM International Symposium on Intelligent Manufacturing and Automation, 2014 (pp. 1616–1624). Elsevier BV. https://doi.org/10.1016/j.proeng.2015.01.535 ( reposiTUm)

Durakbasa, M. N., Bauer, J. M., Bas, G., & Poszvek, G. (2015). Novel Trends In The Development Of Micro- And Nano- Manufacturing Based On Integrated Management Systems. In V. Nikolic & D. Milcic (Eds.), Mechanical Engineering in XXI Century (pp. 327–330). Unigraf. http://hdl.handle.net/20.500.12708/67321 ( reposiTUm)

Stojadinovic, S., Majstorovic, V. D., & Durakbasa, M. N. (2015). A Feature - Based Path Planning for Inspection Prismatic Parts on CMM. In XXI Imeko World Congress - Full Papers (p. 6). http://hdl.handle.net/20.500.12708/67336 ( reposiTUm)

Sagbas, B., & Durakbasa, M. N. (2015). Third - Body Wear Behavior of Orthop a edic Biopolymers. In Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering (p. 8). http://hdl.handle.net/20.500.12708/67347 ( reposiTUm)

Plancak, M., Movrin, D., Kacmarcik, I., Ivanisevic, A., Tolnay, M., & Durakbasa, M. N. (2015). Manufacturing Of Vital Parts By Rotary Forging. In Proceedings - Zbornik New Technologies “NT-2015” (pp. 104–108). Society for Robotics of Bosnia and Herzegovina. http://hdl.handle.net/20.500.12708/67382 ( reposiTUm)

Cavusoglu, I., & Durakbasa, M. N. (2015). Internal Customer Satisfaction Via Precaution of Occupational Health and Safety Being Accurately Accomplished While Manufacturing End Product Made of Glass Fiber Reinforced Polymer by Means of Integrated Management. In ICPR23 Full Paper (p. 7). http://hdl.handle.net/20.500.12708/67345 ( reposiTUm)

Sagbas, B., & Durakbasa, M. N. (2015). Polimer Esasli Kalça Protezlerinin Yüzeylerinde Sürtünmeye Baglı Olusan Sıcaklık Artışının Belirlenmesi - DETERMINING FRICTIONAL TEMPERATURE RISE ON POLYMER BASED HIP PROSTHESIS SURFACES. In 1. Ulusal Plastik Teknolojilerİ Sempozyumu - Upts 2015 (pp. 189–198). YTÜ. http://hdl.handle.net/20.500.12708/67381 ( reposiTUm)

Durakbasa, M. N., Weckenmann, A., & Bas, G. (2015). An Integrated and Systematic Method of Metrology for Efficiency, Quality and Functionality Improvement in Precision Manufacturing. In M. Akkök, E. Budak, M. Firat, & B. Kaftanoglu (Eds.), Diemold 2015 (p. 8). Mechanical Design and Production Society (MATIM). http://hdl.handle.net/20.500.12708/67320 ( reposiTUm)

Yaghmaei, K., Bas, G., & Durakbasa, M. N. (2015). Computational Modeling Of Mechanical Properties Carbon Nanotubereinforced Hydroxyapatite Nanocomposite By Means Of Mechanical Nanometrology. In XXI IMEKO World Congress - Full Papers (p. 5). http://hdl.handle.net/20.500.12708/67331 ( reposiTUm)

Durakbasa, M. N., Poszvek, G., Bas, G., & Bauer, J. M. (2015). Developments In Precision Engineering: High Precision Metrology Applications To Improve Efficiency And Quality. In XXI IMEKOO World Congress - Full Papers (p. 4). http://hdl.handle.net/20.500.12708/67332 ( reposiTUm)

Durakbasa, M. N., Bas, G., Riepl, D., & Bauer, J. M. (2015). An innovative educational concept of teleworking in the high precision metrology laboratory to develop a model of implementation in the advanced manufacturing industry. In Proceedings of 2015 12th International Conference on Remote Engineering and Virtual Instrumentation (REV). 2015 12th International Conference on Remote Engineering and Virtual Instrumentation (REV), Bangkok, Thailand, Non-EU. IEEE. https://doi.org/10.1109/rev.2015.7087288 ( reposiTUm)

Durakbasa, M. N., & Bas, G. (2015). An Analysis Of The Metrology Techniques To Improve Quality And Accuracy. In MultiScience - XXIX. microCAD International Multidisciplinary Scientific Conference (p. 7). ITTC Innovation and Technology Transfer Centre. http://hdl.handle.net/20.500.12708/67194 ( reposiTUm)

Günay Bulutsuz, A., Yurci, M. E., & Durakbasa, M. N. (2015). Investigation Cmm Measurement Parameters Effect To The Measurement Error. In XXI Imeko World Congress - Full Papers (p. 5). http://hdl.handle.net/20.500.12708/67239 ( reposiTUm)

Durakbasa, M. N., & Beken, E. (2014). A Proposed Implementation Process For Total-Quality-Management With Integration Of Sustainability Elements Of The International Standards Iso 14001 And Iso 50001. In 2014 INTERNATIONAL CONFERENCE ON PRODUCTION RESEARCH - REGIONAL CONFERENCE AFRICA, EUROPE AND THE MIDDLE EAST and 3rd INTERNATIONAL CONFERENCE ON QUALITY AND INNOVATION IN ENGINEERING AND MANAGEMENT (p. 6). http://hdl.handle.net/20.500.12708/67101 ( reposiTUm)

Cavusoglu, I., & Durakbasa, M. N. (2014). The Quality Improvement Process Through Application Of Multi-Vari Chart In An Automotive Supplier. In 2014 INTERNATIONAL CONFERENCE ON PRODUCTION RESEARCH - REGIONAL CONFERENCE AFRICA, EUROPE AND THE MIDDLE EAST and 3rd INTERNATIONAL CONFERENCE ON QUALITY AND INNOVATION IN ENGINEERING AND MANAGEMENT (p. 4). http://hdl.handle.net/20.500.12708/67102 ( reposiTUm)

Durakbasa, M. N., Bas, G., Bauer, J. M., & Kräuter, L. (2014). Development Of An Advanced Metrology And Intelligent Quality Management As A Strategic Approach In Manufacturing Industry. In 11th IMEKO TC14 Symposium on Laser Metrology for Precision Measurement and Inspection in Industry (pp. 223–226). Curran Associates, Inc. e-media. http://hdl.handle.net/20.500.12708/67188 ( reposiTUm)

Durakbasa, M. N., Bas, G., Güclü, E., & Pirker, W. (2014). An Innovative Technique for Succesful Clinical Dental Implementation by Means of Quality Control and Surface Characterization Analyse. In The Publications of the MultiScience - XXVIII. microCAD International Multidisciplinary Scientific Conference (p. 7). University of Miskolc. http://hdl.handle.net/20.500.12708/67060 ( reposiTUm)

Yigit, R., Birlik, I., Ak Azem, N. F., Bardakcioglu, O., Durakbasa, M. N., & Celik, E. (2014). Investigation Of The Minimum Quantity Lubrication Grinding Using Nanofluids. In 2014 INTERNATIONAL CONFERENCE ON PRODUCTION RESEARCH - REGIONAL CONFERENCE AFRICA, EUROPE AND THE MIDDLE EAST and 3rd INTERNATIONAL CONFERENCE ON QUALITY AND INNOVATION IN ENGINEERING AND MANAGEMENT (p. 4). http://hdl.handle.net/20.500.12708/67034 ( reposiTUm)

Durakbasa, M. N., Bauer, J. M., & Bas, G. (2014). A Sophisticated Approach to Advanced Production Engineering - Integrated Management for Sustainable Development. In 2014 INTERNATIONAL CONFERENCE ON PRODUCTION RESEARCH - REGIONAL CONFERENCE AFRICA, EUROPE AND THE MIDDLE EAST and 3rd INTERNATIONAL CONFERENCE ON QUALITY AND INNOVATION IN ENGINEERING AND MANAGEMENT (p. 5). http://hdl.handle.net/20.500.12708/67033 ( reposiTUm)

Cakmakci, M., Durakbasa, M. N., Karasu, M. K., & Bas, G. (2013). The relationship between the quality engineering and Taguchi methodology. In Proceedings of the 11th International Symposium on Measurement and Quality Control (p. 4). Osaka University. http://hdl.handle.net/20.500.12708/66803 ( reposiTUm)

Durakbasa, M. N., Bas, G., Bauer, J. M., & Poszvek, G. (2013). Intelligent Design and Advanced Metrology as Strategic Approaches to Efficiency and Quality Improvement in Smart Manufacturing. In The 7th International Working Conference “Total Quality Management - Advanced and Intelligent Approaches” (p. 6). http://hdl.handle.net/20.500.12708/66804 ( reposiTUm)

Durakbasa, M. N., Akdogan, A., Vanli, S., & Günay, A. (2013). Determination of Cutting Tool Geometries with High Precise Measurement Techniques and Investigation of Their Effects on Workpiece Surface Properties. In New Perspectives in Measurements, Tools and Techniques for Industrial Applications (pp. 106–111). IMEKO - International Measurement Confederation, University of Florence. http://hdl.handle.net/20.500.12708/66860 ( reposiTUm)

Bas, G., Durakbasa, M. N., Mankova, I., & Beno, J. (2013). Application of Nanometrology for Assessing the Machining Tool Geometry and Analysis of the Micro/Nano Structure of the End Milling Tool Surfaces. In J. Manka, M. Tysler, V. Witkowsky, & I. Frollo (Eds.), Proceedings of the 9th International Conference on Measurement (pp. 223–226). VEDA Publishing House of the Slovak Academy of Sciences. http://hdl.handle.net/20.500.12708/66808 ( reposiTUm)

Durakbasa, M. N., Mukhametzianova, L., Bas, G., & Güclü, E. (2013). The Role of MMS in an Integrated Management for Improving Production Efficiency and Quality. M.N. Durakbasa. In Vision 2020: Innovation, Development Sustainability, and Economic Growth, Proceedings of the 21st International Business Information Management Association Conference (IBIMA) (p. 9). http://hdl.handle.net/20.500.12708/66807 ( reposiTUm)

Durakbasa, M. N., & Bas, G. (2013). Surface Roughness Investigation of the Cutting Edge Of The High Precision Cutting Tools Enabled By Micro and Nanometrological Measurements. In Proceedings of the XXVII. microCAD International Scientific Conference (p. 5). http://hdl.handle.net/20.500.12708/66809 ( reposiTUm)

Durakbasa, M. N., Bas, G., & Bauer, J. M. (2013). A Holistic And Integrated Strategy To Improve Energy Efficiency In Industry By Target-Setting Modeling. In Proceedings of the ELAEE 2013 Conference, 4th Latin American Meeting on Energy Economics (p. 5). http://hdl.handle.net/20.500.12708/66810 ( reposiTUm)

Cerci, Y., Demircioglu, P., Bogrekci, I., Deniz, C., & Durakbasa, M. N. (2013). Case study in thermal and wear analyses for cutting tools. In Proceedings of the 11th International Symposium on Measurement and Quality Control (p. 4). Osaka University. http://hdl.handle.net/20.500.12708/66800 ( reposiTUm)

Durakbasa, M. N., Bas, G., Bauer, J. M., & Kräuter, L. (2013). Development of an advanced metrology and intelligent quality management as a strategic approach in manufacturing industry. In Proceedings of the 11th International Symposium on Measurement and Quality Control (p. 4). Osaka University. http://hdl.handle.net/20.500.12708/66799 ( reposiTUm)

Bogrekci, I., Demircioglu, P., Cerci, Y., Deniz, C., & Durakbasa, M. N. (2013). Roughness measurement verification of the surface structures produced by different manufacturing techniques by wavelet transform. In Proceedings of the 11th International Symposium on Measurement and Quality Control. ISMQC - International Symposium on Measurement and Quality Control, Osaka - Japan, Non-EU. Osaka University. http://hdl.handle.net/20.500.12708/66801 ( reposiTUm)

Demircioglu, P., Bogrekci, I., Cerci, Y., Deniz, C., Bas, G., & Durakbasa, M. N. (2013). Assessment of cylinder liners using computer vision andnumerical thermal analyses. In Proceedings of he 11th International Symposium on Measurement and Quality Control. ISMQC - International Symposium on Measurement and Quality Control, Osaka - Japan, Non-EU. Osaka University. http://hdl.handle.net/20.500.12708/66802 ( reposiTUm)

Durakbasa, M. N., Bas, G., Kräuter, L., & Poszvek, G. (2013). The Assessment of Industrial Manufacturing Systems Towards Advanced Operations by Means of Integrated Modeling Approach. In Vision 2020: Innovation, Development Sustainability, and Economic Growth, Proceedings of the 21st International Business Information Management Association Conference (IBIMA (p. 9). http://hdl.handle.net/20.500.12708/66805 ( reposiTUm)

Plancak, M., Movrin, D., Car, Z., Durakbasa, M. N., & Vilotic, D. (2013). Orbital Forging of Cross Joint Component. In Z. Car, J. Kudlacek, & T. Szalay (Eds.), IN-TECH2013 (pp. 265–268). Tiskara Susak d.o.o. http://hdl.handle.net/20.500.12708/66899 ( reposiTUm)

Demircioglu, P., Gunay Bulutsuz, A., Sagbas, B., Bogrekci, I., & Durakbasa, M. N. (2013). Surface Topographical Investigations of the Machining Effects on Turning with Coated lnserts for Different Materials. In M. Akkök, E. Budak, M. Firat, & B. Kaftanoglu (Eds.), Design and Production of Machines and Dies/Molds (pp. 285–288). Atilim University Publications. http://hdl.handle.net/20.500.12708/66862 ( reposiTUm)

Sagbas, B., & Durakbasa, M. N. (2013). Optimization of Frictional Heating Parameters of Artificial Joint Materials by Taguchi Approach. In New Perspectives in Measurements, Tools and Techniques for Industrial Applications (pp. 96–101). IMEKO - International Measurement Confederation, University of Florence. http://hdl.handle.net/20.500.12708/66861 ( reposiTUm)

Coskun, D., Demircioglu, P., Bogrekci, I., & Durakbasa, M. N. (2012). Electrodynamical considerations in r-t measurements of high Tc bulk superconductivity: an inexpensive set up design. In Quality Access to Success - QIEM 2nd International Conference on Quality and Innovation in Engineering and Management (p. 8). Quality-Access to Success. http://hdl.handle.net/20.500.12708/66735 ( reposiTUm)

Erol, M., Yurddaskal, M., Yildirim, S., Mermer, O., Bas, G., Cakmakci, M., Durakbasa, M. N., & Celik, E. (2012). Nanometric measurement of the pre nano scale tio2 powders via flame spray pyrolysis: synthesis, properties and photocatalytical decomposition of methylen blue. In IMEKO XX World Congress International Measurement Confederatio (p. 6). http://hdl.handle.net/20.500.12708/66737 ( reposiTUm)

Bas, G., Demircioglu, P., Durakbasa, M. N., & Osanna, P. H. (2012). A nanometrological management approach to assess the profile and the surface characteristics of the end milling tools by multi-measurement analysis. In Proceedings of XX IMEKO World Congress International Measurement Confederation (p. 6). http://hdl.handle.net/20.500.12708/66736 ( reposiTUm)

Cakmakci, M., Ortabas-Demirel, N., Durakbasa, M. N., Bas, G., & Hornikova, A. (2012). Interaction Between Capability Indices and Skewness of Non-Normal Processes Using Quantile Based Estimation and Johnson Transformation. In Quality Access to Success - QIEM 2nd International Conference on Quality and Innovation in Engineering and Management (p. 8). Quality-Access to Success. http://hdl.handle.net/20.500.12708/66700 ( reposiTUm)

Demircioglu, P., Durakbasa, M. N., & Tan, O. (2012). A Comparison Between Contact Type Profilometer and Different D Optical Techniques: A Case Study in Characterization of Machined Surface Structures. In Quality Access to Success - QIEM 2nd International Conference on Quality and Innovation in Engineering and Management (p. 117). Quality-Access to Success. http://hdl.handle.net/20.500.12708/66704 ( reposiTUm)

Durakbasa, M. N., Bas, G., & Demircioglu, P. (2012). A nanometrological process management model to assess the end milling tools in the machining industry. In Proceedings of the 13th International Conference on Tools ICT 2012 (pp. 271–276). http://hdl.handle.net/20.500.12708/66747 ( reposiTUm)

Sagbas, B., & Durakbasa, M. N. (2012). Determining frictional behavior of vitamin e blended Uhmwpe. In Proceedings of XX IMEKO World Congress International Measurement Confederation (p. 6). http://hdl.handle.net/20.500.12708/66746 ( reposiTUm)

Durakbasa, M. N., Demircioglu, P., Bas, G., & Pirker, W. (2012). Micro-examination of Dental Samples to Enable the Quality Characteristics Required by the Clinical Experience using Biomedical Metrology. In The Publications of the XXVI. microCAD (p. 7). http://hdl.handle.net/20.500.12708/66527 ( reposiTUm)

Durakbasa, M. N., Demircioglu, P., & Bas, G. (2012). High-Accuracy Measurement And Evaluation Of The Surface Structures Machined In Micro/nano Scale By Tactile And 3d Optical Systems. In 10th International Scientific Conference “Coordinate Measuring Technique CMT” (p. 12). Bielsko Biala. http://hdl.handle.net/20.500.12708/66534 ( reposiTUm)

Durakbasa, M. N., Osanna, P. H., & Bas, G. (2012). Advanced Management Systems for Quality, Energy and Environment for Efficiency Enhancement of Modern Manufacturing Industries. In V. D. Majstorovic (Ed.), International Convention On Quality 2012 (p. 8). UASQ United Association of Serbia for Quality. http://hdl.handle.net/20.500.12708/66548 ( reposiTUm)

Durakbasa, M. N., Bauer, J. M., & Bas, G. (2012). Developments in High Precision Metrology for Advanced Manufacturing. In S. Hloch (Ed.), Proceedings of 2nd International Conference on MANUFACTURING ENGINEERING & MANAGEMENT 2012 (pp. 210–215). FVT TU in Kosice with a seat in Presov, STEVEPRESS, Ltd. http://hdl.handle.net/20.500.12708/66641 ( reposiTUm)

Gunay Bulutsuz, A., Fank, S., Gulmez, T., & Durakbasa, M. N. (2012). Calculation of measurement uncertainty for plastic (abs) material in flexural testing. In Proceedings of XX IMEKO World Congress International Measurement Confederation (p. 4). http://hdl.handle.net/20.500.12708/65964 ( reposiTUm)

Durakbasa, M. N., & Osanna, P. H. (2011). Intelligent Tolerancing And Advanced Metrology To Support Total Quality Management And Modern Industrial Fabrication. In V. D. Majstorovic (Ed.), Total Quality Management - Advanced and Intelligent Approaches (pp. 29–33). COBISS.SR-ID 183755276. http://hdl.handle.net/20.500.12708/65134 ( reposiTUm)

Durakbasa, M. N., Osanna, P. H., Hornikova, A., Cakmakci, M., Bas, G., & Demircioglu, P. (2011). Production Engineering On The Basis Of Precision Metrology And Intelligent Tolerancing. In Metrology in Production Engineering (pp. 46–51). http://hdl.handle.net/20.500.12708/66185 ( reposiTUm)

Durakbasa, M. N., Bogrekci, I., Demircioglu, P., Bas, G., & Günay, A. (2011). Characterization Of The Surface Roughness By Precision Measurements And Image Processing On Machined Metal Surfaces Of Milling Cutters. In Metrology in Production Engineering (pp. 52–57). http://hdl.handle.net/20.500.12708/66193 ( reposiTUm)

Durakbasa, M. N., & Bas, G. (2011). The Integration Of Energy And Environmental Management System To A Model Of Industrial Plant. In XXV, microCAD International Scientific Conference (pp. 27–32). ITTC Innovation and Technology Transfer Centre. http://hdl.handle.net/20.500.12708/66470 ( reposiTUm)

Durakbasa, M. N., & Bas, G. (2011). Modeling Efficiency Improvement in Industry Through Implementation of Energy Management Systems. In Proceedings of the 6th Conference (pp. 1–7). http://hdl.handle.net/20.500.12708/66500 ( reposiTUm)

Hornikova, A., Durakbasa, M. N., & Osanna, P. H. (2011). Biomedical Application of Form Measurement and Coordinate Metrology. In 2011 IEEE International Symposium on Medical Measurements and Applications (pp. 381–385). IEEE. https://doi.org/10.1109/MeMeA.2011.5966659 ( reposiTUm)

Hornikova, A., Bas, G., Sagbas, B., & Durakbasa, M. N. (2011). Contributing With Design Of Experiment Theory To Quality. In S. Popescu, S. Brad, & D. Popescu (Eds.), QIEM (pp. 95–100). U.T. Press. http://hdl.handle.net/20.500.12708/66353 ( reposiTUm)

Demircioglu, P., Durakbasa, M. N., Osanna, P. H., & Bogrekci, I. (2011). Surface roughness assessment of machined metal surfaces using image processing techniques. In ISMTII 2011 (pp. 1–4). http://hdl.handle.net/20.500.12708/66352 ( reposiTUm)

Durakbasa, M. N., Osanna, P. H., Demircioglu, P., & Bogrekci, I. (2011). Parameters and measurands in precision nanometrology. In ISMTII 2011 (pp. 1–6). http://hdl.handle.net/20.500.12708/66351 ( reposiTUm)

Durakbasa, M. N., Pirker, W., Osanna, P. H., Demircioglu, P., Bas, G., & Gültekin, B. (2011). Application Of Advanced Production Metrology For Quality Improvements In Biomedical Engineering - Analysis And Evaluation Of Surface Structures Of Dental Implants. In Intelligent Quality Measurements - Theory, Education and Training (p. 5). http://hdl.handle.net/20.500.12708/66344 ( reposiTUm)

Durakbasa, M. N., Bas, G., Osanna, P. H., & Bauer, J. M. (2011). Sustainable Management Systems of Quality, Energy and Environment in Industry. In QIEM (pp. 67–70). U.T. Press. http://hdl.handle.net/20.500.12708/66454 ( reposiTUm)

Durakbasa, M. N. (2011). A Modern Scheme for Education, Training and Certification of Quality Personnel and Persons Working in Metrology and Engineering. In UMYOS’2011 (p. 8). http://hdl.handle.net/20.500.12708/66455 ( reposiTUm)

Durakbasa, M. N., Osanna, P. H., Sagbas, B., & Hornikova, A. (2011). High Precision Production Metrology for Quality Improvement in Biomedical Applications. In Measurement 2011 (pp. 135–140). VEDA. http://hdl.handle.net/20.500.12708/66304 ( reposiTUm)

Hornikova, A., Durakbasa, M. N., Güclü, E., & Bas, G. (2011). Data Mining - Novel Statistical Method. In Measurement 2011 (pp. 12–15). VEDA. http://hdl.handle.net/20.500.12708/66305 ( reposiTUm)

Durakbasa, M. N. (2011). Nanometrologia a nanotechnologie v strojarstve. In Metrologicke Listy (pp. 46–54). http://hdl.handle.net/20.500.12708/66463 ( reposiTUm)

Durakbasa, M. N. (2011). Advanced Industrial Manufacturing Systems on Basis of Intelligent Precision Metrology. In TOK 2011 (pp. xxiii–xxx). http://hdl.handle.net/20.500.12708/65970 ( reposiTUm)

Neamtu, C., Crisan, L., Popescu, D., & Durakbasa, M. N. (2010). Modern Instruments for Teaching Coordinate Metrology. In Advances in Coordinate Metrology (pp. 349–358). Wydawnictwo Akademii Techniczno-Humanistycznej W Bielsku-Bialej. http://hdl.handle.net/20.500.12708/66074 ( reposiTUm)

Hornikova, A., Durakbasa, M. N., & Bleicher, F. (2010). Re-Calibration Evaluation Utilizing Data Mining Methods. In ISMQC. Osaka University. http://hdl.handle.net/20.500.12708/66121 ( reposiTUm)

Durakbasa, M. N., Osanna, P. H., Demircioglu, P., & Crisan, L. (2010). Surface Measurement And Evaluation Methods Of High Precision Technical Structures. In microCAD (pp. 193–198). ITTC Innovation and Technology Transfer Centre. http://hdl.handle.net/20.500.12708/66073 ( reposiTUm)

Durakbasa, M. N., Bas, G., & Özkan, Z. (2010). A Proposal Of Methodology For The Strategy And Implementation Of Energy Management Within The Integrated Management Systems. In 16th World Productivity Congress and European Productivity Conference (p. 5). MPM National Productivity Centre of Türkiye - WCPS World Confederation of Productivity Science. http://hdl.handle.net/20.500.12708/66167 ( reposiTUm)

Durakbasa, M. N., Osanna, P. H., & Demircioglu, P. (2010). The Factors Affecting Surface Roughness Measurements of the Machined Flat and Spherical Surface Structures - The Geometry and the Precision of the Surface. In ISMQC 2010 (pp. 1–4). Osaka University. http://hdl.handle.net/20.500.12708/66203 ( reposiTUm)

Durakbasa, M. N., Demircioglu, P., Cakmakci, M., & Hornikova, A. (2010). Nanometrology, Evaluation Techniques and Quality Control for High Accuracy Surface Measurement. In Nano Tr - Vi (p. 154). Izmir Institute of Technology - IZTECH. http://hdl.handle.net/20.500.12708/66233 ( reposiTUm)

Durakbasa, M. N., Osanna, P. H., & Kräuter, L. (2010). Development Tendencies in Precision Engineering and Industrial Nanometrology. In V. D. Majstorovic (Ed.), Total Quality Management & Excellence (pp. 7–12). UASQ - United Association of Serbia for Quality. http://hdl.handle.net/20.500.12708/66098 ( reposiTUm)

Hornikova, A., & Durakbasa, M. N. (2010). Monograph about Data Mining/ Monograph d’Exploration de données. In CAFMET 2010 (p. 8). CAFMET. http://hdl.handle.net/20.500.12708/66077 ( reposiTUm)

Durakbasa, M. N., Osanna, P. H., & Kräuter, L. (2009). Research and Education in Engineering and Business with Special Consideration on Geometrical Product Specifications and Verification - GPS. In C. Oprean, N. Grünwald, & C. Kifor (Eds.), Balkan Region Conference on Engineering and Business Education & International Conference on Engineering and Business Education (pp. 14–18). Lucian Blaga University of Sibiu. http://hdl.handle.net/20.500.12708/65956 ( reposiTUm)

Durakbasa, M. N., Osanna, P. H., Aksoy, P., & Kräuter, L. (2009). Contact and Non-contact Measurement and Analysis of the Surface of High Precision Workpieces. In P. Pawlus (Ed.), Metrology and Properties of Engineering Surfaces (pp. 111–116). Rzeszow University of Technology. http://hdl.handle.net/20.500.12708/65959 ( reposiTUm)

Durakbasa, M. N., Osanna, P. H., Yurci, M. E., & Aksoy, P. (2009). Contact And Contactless Investigations Of Manufactured High-Precise Surface Structures. In Fundamental and Applied Metrology (p. 4). http://hdl.handle.net/20.500.12708/65971 ( reposiTUm)

Durakbasa, M. N., Osanna, P. H., Crisan, L., & Kräuter, L. (2009). Competetive Global And Accurate Economic Industrial Production On Basis Of Intelligent Tolerancing And Coordinate Metrology. In Production Engineering and Manufacturing Systems (pp. 263–268). ITTC Innovation and Technology Transfer Centre. http://hdl.handle.net/20.500.12708/65961 ( reposiTUm)

Osanna, P. H., Durakbasa, M. N., Yaghmaei, K., & Kräuter, L. (2009). Quality Control And Nanometrology For Micro/nano Surface Modification Of Orthopaedic/dental Implants. In M. Tysler (Ed.), MEASUREMENT 2009 (pp. 167–172). Komprint s.r.o. http://hdl.handle.net/20.500.12708/65986 ( reposiTUm)

Kräuter, L., Durakbasa, M. N., & Osanna, P. H. (2009). Metrology and Nanotechnology in Interrelation with Intellectual Property Rights. In M. Tysler (Ed.), MEASUREMENT 2009 (pp. 173–177). Institute of Measurement Science, SAS. http://hdl.handle.net/20.500.12708/65987 ( reposiTUm)

Kräuter, L., Durakbasa, M. N., & Osanna, P. H. (2009). Interrelation of Metrology and Nanotechnology with intellectual Property Rights. In Proceedings of ISMTII-2009 (pp. 167–171). D.S. Rozhdestvensky Optical Society. http://hdl.handle.net/20.500.12708/65993 ( reposiTUm)

Osanna, P. H., & Durakbasa, M. N. (2008). Geometrical Product Specification and Verification (GPS) for the Analytical Description and Evaluation of Technical Structures of any Kind. In H. Wiesner (Ed.), Rolling bearings TC 4 meets GPS TC 213 (pp. 49–55). Austrian Standards plus Publishing ON-V. http://hdl.handle.net/20.500.12708/65786 ( reposiTUm)

Durakbasa, M. N., Osanna, P. H., & Kräuter, L. (2008). Modern Industrial Manufacturing And Fabrication To Achieve High Accuracy And High Economy. In Proceedings 32. Conference on Production Engineering of Serbia with International Participants (pp. 591–594). Faculty of Technical Sciences. http://hdl.handle.net/20.500.12708/65787 ( reposiTUm)

Durakbasa, M. N., Osanna, P. H., Aksoy, P., Bauer, A. J., & Kräuter, L. (2008). Comparision of Contact and Optical Non-Contact Methods for the Analysis and Characterization of Surfaces of Precise Workpieces. In Coordinate Measuring Technique Problems and Implementations (pp. 303–314). http://hdl.handle.net/20.500.12708/65788 ( reposiTUm)

Durakbasa, M. N., Osanna, P. H., & Kräuter, L. (2008). The Fundamental Influence of Education, Training and Certification of Persons Working in Metrology for Research and in Industry. In I. Horvath & Z. Rusak (Eds.), Proceedings of the 7th International Symposium on Tools and Methods of Competitive Engineering (pp. 1409–1410). Faculty of Industrial Design Engineering, Delft University of Technology. http://hdl.handle.net/20.500.12708/65882 ( reposiTUm)

Durakbasa, M. N., Osanna, P. H., Kräuter, L., & Bauer, J. M. (2008). The Improvement of Product and Process Quality in the Industry of the 21st Century, by Application of Nanotechnology for Every-Day-Life and for Bio-Medicine. In Metrologia 2008. 7mo. Simposio INTERNACIONAL, La Habana, Cuba, Non-EU. http://hdl.handle.net/20.500.12708/65883 ( reposiTUm)

Osanna, P. H., Durakbasa, M. N., & Kräuter, L. (2008). Quality and Quality Assurance in European Higher Education. In I. Gh. Rosca, A. Weckenmann, P. H. Osanna, S. Popescu, M. Olaru, & C. Paunescu (Eds.), QIEI 2008. http://hdl.handle.net/20.500.12708/65884 ( reposiTUm)

Osanna, P. H., Durakbasa, M. N., & Kräuter, L. (2007). Produktionsmesstechnik und Qualitätsmanagement - Messung der Qualität - Qualität der Messung. In MERICI TECHNIKA PRO KONTROLU JAKOSTI (pp. 139–144). Technicky Tydenik. http://hdl.handle.net/20.500.12708/65566 ( reposiTUm)

Osanna, P. H., Durakbasa, M. N., Nomak Akdogan, A., Bauer, A. J., & Kräuter, L. (2007). Intelligent Metrology and total Quality Management for the Realisation of Advanced Flexible Disassembly and Recyling of Used Goods for Everyday Life. In TOP 2007 - ENGINEERING OF ENVIRONMENT PROTECTION (pp. 257–262). Publishing House of Slovak University of Technology. http://hdl.handle.net/20.500.12708/65567 ( reposiTUm)

Durakbasa, M. N., Osanna, P. H., & Stout, K. J. (2007). Alternative Ideas for Quality Assurance Based on Function Dependence. In G. Gencyilmaz (Ed.), 4th Congress of the SMEs and Efficiencies - 4. KOBI’ler ve Verimlilik Kongresi (pp. 623–629). Golden Media. http://hdl.handle.net/20.500.12708/65700 ( reposiTUm)

Durakbasa, M. N., Stout, K. J., Osanna, P. H., & Yurci, M. E. (2007). Function Dependent Quality Assurance in Modern Production Engineering. In S. Hloch, Z. Urbanova, J. Dobransky, & I. Orlovsky (Eds.), TSO Technology System Opretaion 2007 (pp. 7–10). FVT TU. http://hdl.handle.net/20.500.12708/65681 ( reposiTUm)

Durakbasa, M. N., Osanna, P. H., Yurci, M. E., & Nomak Akdogan, A. (2007). High Precision Measurement and Evaluation of the Fine Mould Surface Structures. In ISMTII 2007 (pp. 371–374). TOHOKU UNIV SENDAI. http://hdl.handle.net/20.500.12708/65682 ( reposiTUm)

Kahsay, G., Osanna, P. H., & Durakbasa, M. N. (2007). Six Sigma: A Virtually Defect Free Quality Initiative. In TOP 2007 (pp. 143–152). STU - Publishing House of Slvak University of Technology. http://hdl.handle.net/20.500.12708/65683 ( reposiTUm)

Osanna, P. H., & Durakbasa, M. N. (2007). Improvements of Process and Product Quality in Modern Industry, for Every-Day-Life and Bio-Medicine on Basisi of Nanometrology and Nanotechnology. In S. Adamczak (Ed.), ICPM 2007 (pp. 13–21). Kielce University of Technology. http://hdl.handle.net/20.500.12708/65684 ( reposiTUm)

Durakbasa, M. N., Kahsay, G., & Osanna, P. H. (2007). Analysis of Conventionally Machined Surfaces Using Contact Stylus and Optical Measurement Systems. In S. Adamczak (Ed.), ICPM 2007 (pp. 119–123). Kielce University of Technology. http://hdl.handle.net/20.500.12708/65685 ( reposiTUm)

Durakbasa, M. N., Osanna, P. H., Nomak Akdogan, A., Bauer, J. M., & Kräuter, L. (2007). The Influence of Ecology and TQM in European Industrial Production under the Pre-supposition of Intelligent flexible Dissassembly and Recycling of Used Products. In G. M. Dimirovski (Ed.), A Proceedings Volume from the 5th IFAC Workshop DECOM-TT 2007 (pp. 257–260). DEU Press and TOK. http://hdl.handle.net/20.500.12708/65689 ( reposiTUm)

Osanna, P. H., Durakbasa, M. N., Bauer, J. M., & Kräuter, L. (2007). Global International Cooperation of Collaborating Small and Medium Sized Enterprises to Achieve Total Quality Management. In V. D. Majstorovic (Ed.), Total Quality Management - Advanced and Intelligent Approaches (pp. 1–6). http://hdl.handle.net/20.500.12708/65696 ( reposiTUm)

Kräuter, L., Osanna, P. H., & Durakbasa, M. N. (2007). Quality Assurance and Metrology for Change Management Process under Socio-Economic Human Aspects - Investigation and Results. In I. Frollo (Ed.), Proceedings Measurement 2007 (pp. 371–375). Institute of Measurement Science, SAS. http://hdl.handle.net/20.500.12708/65694 ( reposiTUm)

Lackner, F., Riegler, R., Osanna, P. H., & Durakbasa, M. N. (2007). High Precision Strain Gage Based Sensor for Monitoring Suspension Forces at CERN. In I. Frollo (Ed.), Measurement 2007 (pp. 366–370). Institute of Measurement Science, SAS. http://hdl.handle.net/20.500.12708/65695 ( reposiTUm)

Osanna, P. H., Durakbasa, M. N., Kräuter, L., & Güclü, E. (2007). A Modern Scheme for Education, Training and Certification. In MEASUREMENT SCIENCE REVIEW 2007 (pp. 3–9). http://hdl.handle.net/20.500.12708/65693 ( reposiTUm)

Durakbasa, M. N., Yurci, M. E., Osanna, P. H., & Nomak Akdogan, A. (2007). The Structure of Fine Mould Surfaces and Their Accurate Mesurement and Evaluation. In C. Gyenge (Ed.), MTeM 2007 (pp. 481–483). http://hdl.handle.net/20.500.12708/65688 ( reposiTUm)

Stout, K. J., Durakbasa, M. N., & Osanna, P. H. (2007). Quality Assurance - Have We Specified it the Wrong Way Round? In L. Blunt, B. G. Rosen, T. Thomas, & D. Whitehouse (Eds.), Metrology & Properties of Engineering Surfaces. The University of Huddersfield. http://hdl.handle.net/20.500.12708/65698 ( reposiTUm)

Durakbasa, M. N., & Aksoy, P. (2007). Characterization and Analysis of High-Precise Surface Structures by Contact and Non-Contact Methods. In ERIN 2007 PROCEEDINGS (p. 61). http://hdl.handle.net/20.500.12708/65699 ( reposiTUm)

Durakbasa, M. N., Afjehi-Sadat, A., & Osanna, P. H. (2006). Metrology of the Structure of High Precision Machined Workpiece Surfaces. In MicroCAD 2006 (pp. 193–202). http://hdl.handle.net/20.500.12708/65374 ( reposiTUm)

Durakbasa, M. N., & Osanna, P. H. (2006). Intelligent supervision of coordinate measuring machines and the estimation of the uncertainty of measurements with CMMS on the basis of ISO standards. In E. Tokarz (Ed.), COORDINATE MEASURING TECHNIQUE (pp. 45–54). Prasa Beskidzka. http://hdl.handle.net/20.500.12708/65449 ( reposiTUm)

Osanna, P. H., Durakbasa, M. N., & Kräuter, L. (2006). PRODUKTIONSMESSTECHNIK VOM BLICKPUNKT DER INTERNATIONALEN QUALITÄTSMANAGEMENTNORMEN EN/ISO 9000:2000 AUS GESEHEN. In Proceedings (pp. 7–22). http://hdl.handle.net/20.500.12708/65450 ( reposiTUm)

Osanna, P. H., Durakbasa, M. N., & Blaim, M. (2006). Quality Management at the University. In QUALITY MANAGEMENT IN HIGHER EDUCATION (pp. 135–140). Performantica 2006. http://hdl.handle.net/20.500.12708/65438 ( reposiTUm)

Osanna, P. H., Durakbasa, M. N., & Kräuter, L. (2006). Education of Metrologists as Qualified Personnel in Austria. In Sammelwerk der XXV. Tagung für Metrologie (pp. 39–45). http://hdl.handle.net/20.500.12708/65452 ( reposiTUm)

Osanna, P. H., Durakbasa, M. N., & Kräuter, L. (2006). VZDELAVANIE METROLOGOV AKO KVALIFIKOV ANEHO PERSONALU RAKUSKU. In ZBORNIK PREDNASOK ZO SEMINARA (pp. 46–52). http://hdl.handle.net/20.500.12708/65453 ( reposiTUm)

Nomak Akdogan, A., Durakbasa, M. N., Osanna, P. H., & Yurci, M. E. (2006). HIGH PRECISION DETERMINATION AND STATISTICAL EVALUATION OF SURFACE ROUGHNESS ALTERATIONS OF SELECTED MATERIALS. In METROLOGY FOR A SUSTAINABLE DEVELOPMENT. IMEKO XVIII World Congress, Rio de Janeiro, Non-EU. LETRA CAPITAL EDITORA. http://hdl.handle.net/20.500.12708/65458 ( reposiTUm)

Osanna, P. H., Durakbasa, M. N., & Kräuter, L. (2006). Developments in Technology, Sustainability and Medical Engineering on the Basis of Precision and Nano Metrology. In Automation and Mechatronics (pp. 111–152). http://hdl.handle.net/20.500.12708/65468 ( reposiTUm)

Cavusoglu, I., Durakbasa, M. N., & Osanna, P. H. (2006). PROCESS PERFORMANCE EVALUATION AND IMPROVEMENT FOR THE QUALITY PROGRESS IN THE INDUSTRIAL MANUFACTURING SYSTEMS. In METROLOGY FOR A SUSTAINABLE DEVELOPMENT. IMEKO XVIII World Congress, Rio de Janeiro, Non-EU. LETRA CAPITAL EDITORA. http://hdl.handle.net/20.500.12708/65460 ( reposiTUm)

Weckenmann, A., Durakbasa, M. N., & Osanna, P. H. (2005). Ausbildung in der Koordinatenmesstechnik. In Kvalita a GPS 2005 (pp. 35–40). http://hdl.handle.net/20.500.12708/65362 ( reposiTUm)

Osanna, P. H., Durakbasa, M. N., Nomak Akdogan, A., & Tahirova, H. (2005). Artificial Intelligence Based Supervision and Confirmation of Complex Measurement Systems and Interaction to the Hierarchical Metrological Structure. In Metrology in Production Engineering (pp. 25–30). XI Krajowa, II Miedzynarodowa Konferencja Naukowo-Techniczna “METROLOGY IN PRODUCTION ENGINEERING.” http://hdl.handle.net/20.500.12708/65365 ( reposiTUm)

Cavusoglu, I., & Durakbasa, M. N. (2005). TOTAL QUALITY MANAGEMENT (TQM) AND PROCESS IMPROVEMENT METHODS IN THE MODERN MANUFACTURING SYSTEMS. In A. Afjehi-Sadat, M. N. Durakbasa, & P. H. Osanna (Eds.), III. INTERNATIONAL CONGRESS OF PRECISION MACHINING (pp. 89–94). http://hdl.handle.net/20.500.12708/65359 ( reposiTUm)

Durakbasa, M. N. (2005). Fertigungsmesstechnik aus der Sicht der Internationalen Normung. In Kvalita a GPS 2005 (pp. 41–48). http://hdl.handle.net/20.500.12708/65361 ( reposiTUm)

Durakbasa, M. N., & Cavusoglu, I. (2005). Product and Process Improvement for Automative Suppliers in the Modern Quality Management Systems. In Proceedings 11th International Symposium on Quality Function Deployment (pp. 129–139). http://hdl.handle.net/20.500.12708/65360 ( reposiTUm)

Osanna, P. H., Weseslindtner, H., Durakbasa, M. N., & Afjehi-Sadat, A. (2005). Intelligent Metrology, Quality Assurance and Quality Management as Basis for Technical Diagnostics in Global Competitive Production. In 10th IMEKO TC10 International Conference on Technical Diagnostics (pp. 81–86). http://hdl.handle.net/20.500.12708/65224 ( reposiTUm)

Osanna, P. H., Durakbasa, M. N., & Tahirova, H. (2005). INTELLIGENT FLEXIBLE DISASSEMBLY AND RECYCLING OF USED PRODUCTS TO SUPPORT TOTAL QUALITY MANAGEMENT AND SUSTAIABILITY IN EUROPEAN INDUSTRY. In Proceedings of Third International Working Conference (pp. 1–4). International Working Conference Total Quality Management - Advanced and Intelligent Approaches. http://hdl.handle.net/20.500.12708/65225 ( reposiTUm)

Osanna, P. H., Durakbasa, M. N., & Afjehi-Sadat, A. (2005). Measurement Evaluation of Non-Technical Structures Based on Sophisticated Metrology and Modern Information Technology. In Metrology and Properties of Enginieering Surfaces (pp. 183–190). Publications de I’Universite de Saint-Etienne. http://hdl.handle.net/20.500.12708/65226 ( reposiTUm)

Osanna, P. H., Weseslindtner, H., Durakbasa, M. N., Tahirova, H., & Afjehi-Sadat, A. (2005). TQM, LCA and Sustainability in European Industry Supported by Intelligent Flexible Disassembly and Recycling of Used Products. In Innovation-Technics-Education (pp. 312–318). BUDAPEST TECH. http://hdl.handle.net/20.500.12708/65238 ( reposiTUm)

Nomak Akdogan, A., Durakbasa, M. N., Osanna, P. H., & Yurci, M. E. (2005). Identifying Mould Surface Texture Parameters Experimentally with the Help of Precision Measurement Techniques. In A. Afjehi-Sadat, M. N. Durakbasa, & P. H. Osanna (Eds.), III. INTERNATIONAL CONGRESS OF PRECISION MACHINING (pp. 49–55). http://hdl.handle.net/20.500.12708/65357 ( reposiTUm)

Osanna, P. H., Durakbasa, M. N., & Tahirova, H. (2005). TQM and Environmental Management Supported by Semi Automated Disassembly. In ANNALS OF MTeM FOR 2005 & PROCEEDINGS (pp. 313–316). http://hdl.handle.net/20.500.12708/65356 ( reposiTUm)

Osanna, P. H., Durakbasa, M. N., Tahirova, H., & Cavusoglu, I. (2005). END OF LIFE MANAGEMENT AND RECYCLING IOF USED PRODUCTS IN THE EUROPEAN INDUSTRIES. In TOP 2005 (pp. II-1-II–7). http://hdl.handle.net/20.500.12708/65355 ( reposiTUm)

Osanna, P. H., Durakbasa, M. N., Tahirova, H., & Afjehi-Sadat, A. (2005). Implementation of Life-Cycle Assessment (LCA) for better waste management in countries of Europe, Caucasus and central Asia. In ICPM 2005 Proceedings (pp. 257–264). Abteilung für Austauschbau und Messtechnik, TU Wien. http://hdl.handle.net/20.500.12708/65352 ( reposiTUm)

Osanna, P. H., Durakbasa, M. N., Kahsay, G., & Afjehi-Sadat, A. (2005). Quality Management Practices and Challenges of Manufacturing Industries of Least Developing Countries. In ICPM 2005 Proceedings (pp. 251–256). Abteilung für Austauschbau und Messtechnik, TU Wien. http://hdl.handle.net/20.500.12708/65351 ( reposiTUm)

Durakbasa, M. N., Osanna, P. H., & Afjehi-Sadat, A. (2004). Surface Assessment Related to Biomedicine - Possibilities, Opportunities and Future Developments. In Metrology and Properties of Engineering Surfaces (p. 271). Halmstad University. http://hdl.handle.net/20.500.12708/65168 ( reposiTUm)

Osanna, P. H., & Durakbasa, M. N. (2004). Evaluation and Virtual Realisation of Non-technical Structures using by Co-ordinate Metrology. In COORDINATE MEASURING TECHNIQUE (pp. 203–212). Tagungsband. http://hdl.handle.net/20.500.12708/65163 ( reposiTUm)

Osanna, P. H., Durakbasa, M. N., & Afjehi-Sadat, A. (2004). Metrology in Micro- and Nanotechnology. In Proceedings Kongres Metrologii, KM 2004 (p. 9). Politechnika Wroclawska. http://hdl.handle.net/20.500.12708/65172 ( reposiTUm)

Osanna, P. H., Durakbasa, M. N., & Afjehi-Sadat, A. (2003). Modern Production Metrology as Basis of Quality Control and Quality Assurance for the Industry of the 21st Century. In Metrology in Production Engineering (pp. 457–474). http://hdl.handle.net/20.500.12708/65204 ( reposiTUm)

Osanna, P. H., Durakbasa, M. N., & Afjehi-Sadat, A. (2003). Structure Measurement of Workpiece Surfaces at High Precision Machining. In 2nd International Congres of Precision Machining (pp. 50–59). CVUT. http://hdl.handle.net/20.500.12708/65166 ( reposiTUm)

Osanna, P. H., & Durakbasa, M. N. (2003). Fertigungsmesstechnik aus Sicht der ISO Normen. In Messtechnik für die Qualitätskontrolle (pp. 158–168). Tagungsband. http://hdl.handle.net/20.500.12708/65165 ( reposiTUm)

Durakbasa, M. N., & Osanna, P. H. (2003). Development and State of the Art of Production Metrology for the 21st Century - From Micrometrology to Nanometrology and Picometrology. In Modern Technologies in Manufacturing (pp. 464–474). Proceedings of the 6th International Conference MTeM. http://hdl.handle.net/20.500.12708/65157 ( reposiTUm)

Osanna, P. H., Durakbasa, M. N., & Afjehi-Sadat, A. (2003). Nanotechnologie und Nanometrologie in Maschinenbau und Biomedizin. In BEITRÄGE DER INFORMATIONSTAGUNG MIKROELEKTRONIK 2003 (pp. 19–27). Eigenverlag des Österreichischen Verbandes für Elektrotechnik. http://hdl.handle.net/20.500.12708/65206 ( reposiTUm)

Durakbasa, M. N., Osanna, P. H., & Nomak Akdogan, A. (2003). Supervision And Confirmation Of Complex Measurement Systems By Using Of Intelligent Technologies. In Metrology in the 3rd Millennium (p. 4). http://hdl.handle.net/20.500.12708/65992 ( reposiTUm)

Osanna, P. H., Durakbasa, N. M., Afjehi-Sadat, A., & Bauer, J. M. (2002). Artificial intelligence and information technology to support measurement technique in modern production plants. In Proceedings First International IEEE Symposium Intelligent Systems. First International IEEE Symposium, Varna, EU. IEEE. https://doi.org/10.1109/is.2002.1044222 ( reposiTUm)

Osanna, P. H., & Durakbasa, M. N. (2002). Concept for Computer Aided Non-contact Laser Roughness Evaluation of Engineering Surfaces. In Laser Metrology Applied to Science, Industry and Everyday Life - LM-2002 (pp. 708–714). SPIE Proceedings, Volume 4900. http://hdl.handle.net/20.500.12708/65167 ( reposiTUm)

Durakbasa, M. N., & Osanna, P. H. (2002). The Role of Co-ordinate Metrology in the Hierarchical Structure of Metrology and the System for Measurement Instruments Confirmation. In COORDINATE MEASURING TECHNIQUE (pp. 55–62). Tagung. http://hdl.handle.net/20.500.12708/65162 ( reposiTUm)

Durakbasa, M. N. (2002). Artificial Intelligence Based Measurement System Supervision. In Intelligent Systems (pp. 298–301). IEEE. http://hdl.handle.net/20.500.12708/65164 ( reposiTUm)

Osanna, P. H., & Durakbasa, M. N. (2001). Teaching in Quality Science and High Quality Teaching Processes for Higher Education. In Metrological Aspects of the Quality Assurance - Accreditation and Certification in New Millenium (pp. 117–121). http://hdl.handle.net/20.500.12708/65207 ( reposiTUm)

Durakbasa, M. N., & Osanna, P. H. (2001). Surface Measurement and Evaluation of Non Technical Structures by Co-ordinate Metrology. In HMD 18th Metrology Symposium (p. 4). Symposium Digest. http://hdl.handle.net/20.500.12708/65208 ( reposiTUm)

Osanna, P. H., & Durakbasa, M. N. (2001). Artificial Intelligence based Measurement Systems Monitoring and Supervision. In HMD 18th Metrology Symposium (p. 4). http://hdl.handle.net/20.500.12708/65209 ( reposiTUm)

Durakbasa, M. N. (1996). Rechnerunterstützte Prüfmittelüberwachung in der modernen Produktionstechnik. In Proceedings 13th Conference BIAM ’96 (p. D-26-D-31). KoREMA. http://hdl.handle.net/20.500.12708/68135 ( reposiTUm)

Beiträge in Büchern

Bodur, O., Çolak, Ü. Ö., Sterca, D.-A., Walcher, E. M., Cristian, L.-N., & Durakbasa, N. (2022). Optimization of the Crankshaft Journal Bearings Efficiency. In B. Katalinic (Ed.), DAAAM International Scientific Book 2022 (Vol. 21, pp. 97–106). https://doi.org/10.2507/daaam.scibook.2022.08 ( reposiTUm)

Sen, G., Medeni, I. T., Sen, K. Ö., Durakbasa, M. N., & Medeni, T. D. (2022). Sensor Based Intelligent Measurement and Blockchain in Food Quality Management. In M. N. Durakbasa & G. Gencyilmaz (Eds.), Digitizing Production Systems (pp. 323–334). Springer Nature Switzerland AG. https://doi.org/10.1007/978-3-030-90421-0_27 ( reposiTUm)

Sokac, M., Santosi, Z., Vukelic, D., Katic, M., Durakbasa, M. N., & Budak, I. (2021). Geometric Tolerancing Analysis of Multi-material Components (MMCs) Obtained by Industrial X-Ray Computed Tomography. In Digital Conversion on the Way to Industry 4.0 - Selected Papers from ISPR2020, Lecture Notes in Mechanical Engineering (pp. 607–613). Springer Nature Switzerland AG. http://hdl.handle.net/20.500.12708/30404 ( reposiTUm)

Özcan, A. M., Akdogan, A., & Durakbasa, M. N. (2021). Improvements in Manufacturing Processes by Measurement and Evaluation Studies According to the Quality Management System Standard in Automotive Industry. In N. M. Durakbasa & G. Gencyilmaz (Eds.), Digital Conversion on the Way to Industry 4.0 (pp. 483–492). Springer Nature Switzerland AG. https://doi.org/10.1007/978-3-030-62784-3_41 ( reposiTUm)

Sterca, D.-A., Roxana-Anamaria Calin, Lucian Cristian, Walcher, E. M., Bodur, O., Vasile Ceclan, Sorin Dumitru Grozav, & Durakbasa, N. M. (2021). Evaluation of Fused Deposition Modeling Process Parameters Influence on 3D Printed Components by High Precision Metrology. In N. M. Durakbasa & G. Gencyilmaz (Eds.), Digitizing Production Systems (pp. 281–295). https://doi.org/10.1007/978-3-030-90421-0_24 ( reposiTUm)

Demircioglu, P., Bogrekci, I., Gönülcan, S., & Durakbasa, M. N. (2021). Tensıle Test Specımen for Dıfferent Test Specımen Geometrıes. In B. Katalinic (Ed.), DAAAM International Scientific Book (pp. 107–116). DAAAM International. https://doi.org/10.2507/daaam.scibook.2021.09 ( reposiTUm)

Bodur, O., Walcher, E. M., Durakbasa, N., & Sterca, D.-A. (2021). Implementation of an Eco-Design Process to Minimize Negative Environmental Impacts - Case Study. In B. Katalinic (Ed.), DAAAM International Scientific Book (pp. 117–130). DAAAM International. https://doi.org/10.2507/daaam.scibook.2021.10 ( reposiTUm)

Demircioglu, P., Bögrekci, I., Sevinc, B., & Durakbasa, M. N. (2021). Improving Manufacturing Process of Mobile Recorder. In N. M. Durakbasa & M. G. Gençyılmaz (Eds.), Digital Conversion on the Way to Industry 4.0 (pp. 504–512). Springer Nature Switzerland AG. https://doi.org/10.1007/978-3-030-62784-3_43 ( reposiTUm)

Yurci, C., & Durakbasa, M. N. (2021). A Brief General Industrial Virtual Reality Applications Overview Including a Simple Factory VR Simulation. In N. M. Durakbasa & M. G. Gençyılmaz (Eds.), Digital Conversion on the Way to Industry 4.0 (pp. 723–735). Springer Nature Switzerland AG. https://doi.org/10.1007/978-3-030-62784-3_61 ( reposiTUm)

Ugur Tuncer, G., Davutoglu, C., & Durakbasa, M. N. (2021). Intelligent Test Automation for Improved Software Quality Assurance. In N. M. Durakbasa & M. G. Gençyılmaz (Eds.), Digital Conversion on the Way to Industry 4.0 (pp. 614–624). Springer Nature Switzerland AG. https://doi.org/10.1007/978-3-030-62784-3_53 ( reposiTUm)

Dönmezer, S. (2021). Measurements of a Finished Garment Using 3D Laser Image Processing. In M. N. Durakbasa & G. Gencyilmaz (Eds.), Digital Conversion on the Way to Industry 4.0 (pp. 162–174). Springer Nature Switzerland AG. https://doi.org/10.1007/978-3-030-62784-3_14 ( reposiTUm)

Dönmezer, S., Durakbasa, N. M., Bas, G., Bodur, O., Walcher, E. M., & Güclü, E. (2021). Digital-Body (Avatar) Library for Textile Industry. In N. M. Durakbasa & M. G. Gençyılmaz (Eds.), Digitizing Production Systems (pp. 24–38). https://doi.org/10.1007/978-3-030-90421-0_3 ( reposiTUm)

Bodur, O., Poszvek, G., Walcher, E. M., Durakbasa, N. M., & Bauer, J. M. (2020). Intelligent Design and Advanced Precision Metrology on the Geometrical Structure of Medical Needles Based on GPS and ISO Standards. In M. N. Durakbasa & G. Gencyilmaz (Eds.), Digital Conversion on the Way to Industry 4.0 (pp. 346–362). Springer Nature Switzerland AG. https://doi.org/10.1007/978-3-030-62784-3_29 ( reposiTUm)

Bogrekci, I., Demircioglu, P., Sucuoglu, S., Altun, E., Sakar, B., & Durakbasa, N. (2020). Topology Optimization of a Tensile Test Specimen. In B. Katalinic (Ed.), DAAAM International Scientific Book (pp. 099–112). DAAAM International. https://doi.org/10.2507/daaam.scibook.2020.08 ( reposiTUm)

Bagci, H. B., Sagbas, B., & Durakbasa, N. (2020). Effect of Direct Metal Laser Sintering Process Parameters on Dimensional Accuracy of AlSi10Mg Parts. In B. Katalinic (Ed.), DAAAM International Scientific Book (pp. 171–180). DAAAM International Vienna. https://doi.org/10.2507/daaam.scibook.2020.13 ( reposiTUm)

Kahraman, Y. E., Madan, M., Sagbas, B., & Durakbasa, M. N. (2020). Parametric Design and Modeling of 3D Printed Prosthetic Finger. In M. N. Durakbasa & G. Gencyilmaz (Eds.), Digital Conversion on the Way to Industry 4.0 (pp. 80–90). Springer Nature Switzerland AG. https://doi.org/10.1007/978-3-030-62784-3_7 ( reposiTUm)

Hasan, M. S., Svorcan, J., Tanovic, D., Bas, G., & Durakbasa, M. N. (2020). Conceptual Design and Fluid Structure Interaction Analysis of a Solar Powered High-Altitude Pseudo-Satellite (HAPS) UAV Wing Model. In N. M. Durakbasa & M. G. Gençyılmaz (Eds.), Digital Conversion on the Way to Industry 4.0 (pp. 93–105). Springer Nature Switzerland AG. https://doi.org/10.1007/978-3-030-62784-3_8 ( reposiTUm)

Poszvek, G., Wiedermann, C., Markl, E., Bauer, J. M., Seemann, R., Durakbasa, M. N., & Lackner, M. (2020). Fused Filament Fabrication of Ceramic Components for Home Use. In N. M. Durakbasa & M. G. Gençyılmaz (Eds.), Digital Conversion on the Way to Industry 4.0 (pp. 121–139). Springer Nature Switzerland AG. https://doi.org/10.1007/978-3-030-62784-3_11 ( reposiTUm)

Pucher, E., Gruber, A. F., & Spitzwieser, C. (2020). IoT Based Real-World Emission Analysis of Motorcycles. In N. M. Durakbasa & M. G. Gençyılmaz (Eds.), Digital Conversion on the Way to Industry 4.0 (pp. 14–23). Springer Nature Switzerland AG. https://doi.org/10.1007/978-3-030-62784-3_2 ( reposiTUm)

Durakbasa, N. M., Demircioglu, P., Bauer, J. M., BOGREKCI, I., Bas, G., Bodur, O., & Poszvek, G. (2019). Additive Miniaturized-Manufactured Gear Parts Validated by Various Measuring Methods. In D. Majstorović & N. M. Durakbasa (Eds.), Proceedings of the 12th International Conference on Measurement and Quality Control - Cyber Physical Issue (pp. 276–290). Springer Cham. https://doi.org/10.1007/978-3-030-18177-2_25 ( reposiTUm)

Erbul, A., Vanli, A. S., Akdogan, A., & Durakbasa, N. (2017). Gating System Design and Optımızatıon in Sand Mold Casting of Cast Irons. In DAAAM International Scientific Book (pp. 173–190). DAAAM International. https://doi.org/10.2507/daaam.scibook.2017.14 ( reposiTUm)

Yurci, C., Akdogan, A., & Durakbasa, N. (2017). A Case Study – Resistance Spot Welding Distortions According to Several Welding Sequences. In B. Katalinic (Ed.), DAAAM International Scientific Book (pp. 155–172). DAAAM International. https://doi.org/10.2507/daaam.scibook.2017.13 ( reposiTUm)

Sen, K. O., Durakbasa, N., Erdol, H., Berber, T., Bas, G., & Sevik, U. (2017). Implementation of Digitalization In Food Industry. In B. Katalinic (Ed.), DAAAM International Scientific Book (pp. 091–104). DAAAM International Vienna. https://doi.org/10.2507/daaam.scibook.2017.08 ( reposiTUm)

Durakbasa, M. N. (2016). Prüfmittelmanagement und Messtechnik. In F. Brunner & K. Wagner (Eds.), Qualitätsmanagement (pp. 241–269). Carl Hanser Verlag. https://doi.org/10.3139/9783446448407.010 ( reposiTUm)

Durakbasa, M. N., Bas, G., & Bauer, J. M. (2016). Developments in Advanced Production Engineering Enabled By High Precision Metrology. In Development In Machining Technology (pp. 144–154). Cracow University of Technology. http://hdl.handle.net/20.500.12708/29319 ( reposiTUm)

Cavusoglu, I., Walcher, E. M., Ugur Tuncer, G., & Durakbasa, M. N. (2016). Effects of the Fiber Percentage Rate of the GFPR Composites. In DAAAM Scientific Book 2016 (pp. 335–342). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/29183 ( reposiTUm)

Kandrac, L., Mankova, I., Vrabel, M., Beno, J., Stahovec, J., Durakbasa, M. N., & Bas, G. (2014). Application of FEM Analysis to Predict the Effect of Cutting Conditions and Tool Geometry on Temperature and Cutting Forces During Orthogonal Cutting of Ti-6Al-4V. In Scientific Research Reports “Development in Machining Technology” (pp. 52–74). Development in Machining Technology. http://hdl.handle.net/20.500.12708/28320 ( reposiTUm)

Kandrac, L., Mankova, I., Vrabel, M., Beno, J., Durakbasa, M. N., & Bas, G. (2013). Outline Of Cutting Edge Preparation And Model Proposal For Nanometrological Process Management. In W. Zebala & I. Mankova (Eds.), Scientific Research Reports “Development in Machining Technology” (pp. 62–81). Development in Machining Technology. http://hdl.handle.net/20.500.12708/27987 ( reposiTUm)

Durakbasa, M. N., Demircioglu, P., & Bas, G. (2012). Metrological Evaluations at Micro- and Nanoscaled Surface Characteristics via Process Management Approach. In Development of Surface Metrology, Pawel Pawlus (ed.) et al. (pp. 45–56). Development of Surface Metrology, Pawel Pawlus (ed.) et al. http://hdl.handle.net/20.500.12708/27988 ( reposiTUm)

Bogrekci, I., Demircioglu, P., & Durakbasa, M. N. (2011). Comparison between 3D Digital and Optical Microscopes for the Surface Measurement using Image Processing Techniques. In Laser Metrology for Precision Measurement and Inspection in Industry (LMPMI) 2011 (pp. 39–47). VDI Verlag GmbH. http://hdl.handle.net/20.500.12708/27291 ( reposiTUm)

Osanna, P. H., Durakbasa, M. N., Yurci, M. E., & Bauer, J. M. (2009). Enterprise Information Systems for Business Integration in Global International Cooperations of Collaborating Small and Medium Sized Organisations. In M. M. Cruz-Cunha (Ed.), Enterprise Information Systems for Business Integration in SMEs Technological, Organizational and Social Dimensions (pp. 175–186). Business Science Reference - IGI Global. http://hdl.handle.net/20.500.12708/26486 ( reposiTUm)

Durakbasa, M. N., Osanna, P. H., Yurci, M. E., & Nomak Akdogan, A. (2008). High Precision Measurement and Evaluation of the Fine Mould Surface Structures, in Measurement Technology and Intelligent Instruments. In E. Armanios, Y.-W. Mai, F. H. Wöhlbier, & M. N. Golam (Eds.), Measurement Technology and Intelligent Instruments VIII (pp. 221–224). Trans Tech Publications Ltd. http://hdl.handle.net/20.500.12708/26314 ( reposiTUm)

Osanna, P. H., Durakbasa, M. N., Slanar, G., & Kräuter, L. (2008). Erhöhung der Qualität und Umwelt-Verträglichkeit von Prozessen und Anlagen in modernen Industrie-Betrieben. In S. Adamczak & P. H. Osanna (Eds.), Science Report (pp. 21–28). Wydawnictwo Politechniki Swietokrzyskiej. http://hdl.handle.net/20.500.12708/26364 ( reposiTUm)

Durakbasa, M. N., Osanna, P. H., Crisan, L., & Kräuter, L. (2008). Metrologie und Technologie im Nanometer- und Picometer-Bereich. In S. Adamczak & P. H. Osanna (Eds.), Science Report (pp. 9–19). Wydawnictwo Politechniki Swietokrzyskiej. http://hdl.handle.net/20.500.12708/26577 ( reposiTUm)

Osanna, P. H., Durakbasa, M. N., & Kräuter, L. (2007). Accurate Workpiece Measurement Technique Develops from Precision Metrology to Nanometrology and Femtometrology. In I. Mankova, W. Zebala, & J. Beno (Eds.), Production Process in Mechanical Engineering (pp. 31–42). Cracow University of Technology - Technical University of Kosice. http://hdl.handle.net/20.500.12708/26052 ( reposiTUm)

Osanna, P. H., Durakbasa, M. N., Bauer, J. M., Tahirova, H., & Kräuter, L. (2007). Intelligent flexible disassembly and recycling of used products to support sustainability and total quality management in modern manufacturing industry. In C. Brebbia, M. E. Conti, & E. Tiezzi (Eds.), Management of Natural Resources, Sustainable Development and Ecological Hazards (pp. 209–215). Wessex Institute of Technology. http://hdl.handle.net/20.500.12708/26042 ( reposiTUm)

Osanna, P. H., Durakbasa, M. N., & Kräuter, L. (2006). Moderne Metrologie in Qualitätsmanagementsystemen. In S. Adamczak & P. H. Osanna (Eds.), SCIENCE REPORT PROJECT PL-0007 Modern Metrology in Quality Management Systems (pp. 11–27). Science Report. http://hdl.handle.net/20.500.12708/26053 ( reposiTUm)

Osanna, P. H., Durakbasa, M. N., & Afjehi-Sadat, A. (2006). Nano-Metrologie als wissenschaftliche Disziplin in der praktischen Anwendung und im Blickpunkt der europäischen internationalen Standardisierung. In Messtechnik für Mikro- und Nano-Engineering (p. 12). VDI Verlag GmbH. http://hdl.handle.net/20.500.12708/26040 ( reposiTUm)

Osanna, P. H., Durakbasa, M. N., & Afjehi-Sadat, A. (2006). EVALUATION OF NON-TECHNICAL STRUCTURES ON THE BASIS OF SOPHISTICATED PRODUCTION METROLOGY AND INFORMATION TECHNOLOGY. In W. Zebala & J. Beno (Eds.), Production Process in Mechanical Engineering (pp. 153–160). Cracow University of Technology - Technical University of Kosice. http://hdl.handle.net/20.500.12708/26039 ( reposiTUm)

Afjehi-Sadat, A., Durakbasa, M. N., & Osanna, P. H. (2005). Design and manufacture of measuring instruments (chapter 6). In Measurement in Technology - Volume I (pp. 153–167). TU Wien. http://hdl.handle.net/20.500.12708/26030 ( reposiTUm)

Durakbasa, M. N., Afjehi-Sadat, A., & Osanna, P. H. (2005). Measurement of length, position, dimension (chapter 12). In Measurement in Technology - Volume II (pp. 354–381). TU Wien. http://hdl.handle.net/20.500.12708/26031 ( reposiTUm)

Afjehi-Sadat, A., Durakbasa, M. N., Stout, K. J., Osanna, P. H., & Ruiz, J.-M. (2005). Measurement of surface roughness, waviness and the primary profile (chapter 13). In Measurement in Technology - Volume II (pp. 382–403). TU Wien. http://hdl.handle.net/20.500.12708/26032 ( reposiTUm)

Osanna, P. H., Durakbasa, M. N., & Afjehi-Sadat, A. (2005). Measurement of geometrical properties (chapter 14). In Measurement in Technology - Volume II (pp. 404–422). TU Wien. http://hdl.handle.net/20.500.12708/26033 ( reposiTUm)

Durakbasa, M. N., Afjehi-Sadat, A., & Osanna, P. H. (2005). Uncertainty of measurement (chapter 27). In Measurement in Technology - Volume II (pp. 641–662). TU Wien. http://hdl.handle.net/20.500.12708/26035 ( reposiTUm)

Osanna, P. H., Durakbasa, M. N., & Afjehi-Sadat, A. (2004). Production Metrology for Quality Control in Biomedical Application - Opportunities, Trends and Future Developments. In Measurement and Quality Control in Production (VDI-Bericht 1680) (pp. 291–296). VDI Verlag GmbH. http://hdl.handle.net/20.500.12708/25992 ( reposiTUm)

Osanna, P. H., & Durakbasa, M. N. (2004). Prüfmittelmanagement und Messtechnik. In Taschenbuch Qualitätsmanagement (pp. 200–224). Hanser. http://hdl.handle.net/20.500.12708/25994 ( reposiTUm)

Osanna, P. H., Durakbasa, M. N., & Slanar, G. (2003). Entwicklungsstand der Messtechnik am Beginn des 21sten Jahrhunderts. In S. Adamczak & P. H. Osanna (Eds.), Computer-Aided Systems for Manufacture and Measurement of Machine Elements (pp. 11–22). Wydawnictwo. http://hdl.handle.net/20.500.12708/25995 ( reposiTUm)

Durakbasa, M. N. (2003). RECHNERUNTERSTÜTZTE INTELLIGENTE PRÜFMITTELVERWALTUNG UND -ÜBERWACHUNG FÜR GEOMETRISCHE GRÖSSEN. In Computer-Aided Systems for Manufacture and Measurement of Machine Elements (pp. 91–98). Wydawnictwo. http://hdl.handle.net/20.500.12708/25996 ( reposiTUm)

Durakbasa, M. N., & Osanna, P. H. (2002). Developments of Surface Measurement and Evaluation of Biomedical Structures. In F. Trebuna (Ed.), Acta Mechanica Slovaca (pp. 25–29). Faculty of Mechanical Engineering, Technical University in Kosice. http://hdl.handle.net/20.500.12708/26043 ( reposiTUm)

Osanna, P. H., Sarigül, E., Durakbasa, M. N., & Osanna, A. (1994). The Role of Databanks for Artificial Intelligence Based Measurement and Control in Computer Integrated Production. In R. A. Adey, G. Rzevski, & D. W. Russel (Eds.), Applications of Artificial Intelligence in Engineering IX (p. 8). WIT Press. http://hdl.handle.net/20.500.12708/27265 ( reposiTUm)

Durakbasa, M. N., Osanna, P. H., Oberländer, R., & Kappis, G. (1989). The Utilization of CMM’s for the Comprehensive Analysis of Macro- and - and Micro-Geometry of Workpieces. In T. Pfeifer (Ed.), Dimensional Metrology in Production and Quality Control (pp. 119–124). VDI Verlag GmbH. http://hdl.handle.net/20.500.12708/28228 ( reposiTUm)

Bücher

Durakbasa, N. M., & Gençyılmaz, M. G. (Eds.). (2023). Towards Industry 5.0 (1st ed.). Springer Nature Switzerland AG. https://doi.org/10.1007/978-3-031-24457-5 ( reposiTUm)

Durakbasa, M. N., & Gencyilmaz, G. (Eds.). (2022). Digitizing Production Systems - Selected Papers from ISPR2021, October 07-09, 2021. Springer Nature Switzerland AG. https://doi.org/10.1007/978-3-030-90421-0 ( reposiTUm)

Durakbasa, N. M., & Gençyılmaz, M. G. (Eds.). (2021). Digital Conversion on the Way to Industry 4.0. Springer International Publishing. https://doi.org/10.1007/978-3-030-62784-3 ( reposiTUm)

Crisan, L., Durakbasa, M. N., Tripa, M., & Pop, G. M. (Eds.). (2019). SpecificaŢii Geometrice Ale Produselor -Geometrical Product Specifications-. U.T. Press. http://hdl.handle.net/20.500.12708/24725 ( reposiTUm)

Budak, I., Hodolic, J., Besic, I., Vukelic, D., Osanna, P. H., & Durakbasa, M. N. (Eds.). (2009). Coordinate Measuring Machines And Cad-Inspection - Koordinatne Merne Masine I Cad Inspekcia. Fakultet tehnickih nauka. http://hdl.handle.net/20.500.12708/23009 ( reposiTUm)

Tagungsbände

Durakbasa, M. N., & Gencyilmaz, G. (Eds.). (2019). Proceedings of the International Symposium for Production Research 2018. Springer International Publishing AG. https://doi.org/10.1007/978-3-319-92267-6 ( reposiTUm)

Durakbasa, M. N., & Gençyılmaz, M. G. (Eds.). (2019). Proceedings of the International Symposium for Production Research 2019. Springer Nature Switzerland AG. https://doi.org/10.1007/978-3-030-31343-2 ( reposiTUm)

Proceedings of the 12th International Conference on Measurement and Quality Control - Cyber Physical Issue. (2019). In V. D. Majstorovic & M. N. Durakbasa (Eds.), Lecture Notes in Mechanical Engineering. Springer International Publishing. https://doi.org/10.1007/978-3-030-18177-2 ( reposiTUm)

Afjehi-Sadat, A., Durakbasa, M. N., & Osanna, P. H. (Eds.). (2005). Proceedings of III. International Congress of Precision Machining - ICPM 2005. Abteilung für Austauschbau und Messtechnik, TU Wien. http://hdl.handle.net/20.500.12708/22680 ( reposiTUm)

Durakbasa, M. N., Osanna, P. H., Wehrmann, W., & Afjehi-Sadat, A. (Eds.). (2000). XVI IMEKO WORLD CONGRESS IMEKO 2000 PROCEEDINGS VOLUME IV Topic 4 - Measurement of Electrical Quantities. Abteilung für Austauschbau und Messtechnik, TU Wien. http://hdl.handle.net/20.500.12708/24108 ( reposiTUm)

Durakbasa, M. N., Osanna, P. H., & Afjehi-Sadat, A. (Eds.). (2000). XVI IMEKO WORLD CONGRESS IMEKO 2000 PROCEEDINGS VOLUME I Abstracts and Plenary Papers. Abteilung Austauschbau und Messtechnik. http://hdl.handle.net/20.500.12708/24107 ( reposiTUm)

Präsentationen

Durakbasa, M. N. (2021). Advanced production and measurement technologies for quality based on integrated management systems on the way to the factory of the future. QIEM-ICNcT 2021 Joint conference “Quality and Innovation & Nonconventional Technologies in the post-pandemic world,” Online, Unknown. http://hdl.handle.net/20.500.12708/95584 ( reposiTUm)

Weckenmann, A., & Durakbasa, M. N. (2018). Testing for Industrie 4.0: Extended Specification, Advanced Measurement and Enriched Evaluation for Virtual Prediction of Functional Capability. Icpr-Aem & Qiem 2018, Cluj Napoca, Romania. http://hdl.handle.net/20.500.12708/95058 ( reposiTUm)

Durakbasa, M. N. (2017). Novel Trends in Advanced Production Systems and Multi Functional Intelligent Factories of the Future. MultiScience - XXXI. microCAD International Multidisciplinary Scientific Conference, Miskolc, Hungary. http://hdl.handle.net/20.500.12708/94625 ( reposiTUm)

Durakbasa, M. N. (2016). Micro - Nano Manufacturing Metrology As A Part Of Advanced Manufacturing. International Conference Advanced Manufacturing as the Foundation for a Successful Society - Challenges and Opportunities for Advanced-industrialization of Serbia / Horizon 2020/2030 INDUSTRY 4.0.0 Serbian Program, Belgrad, SERBIA, Non-EU. http://hdl.handle.net/20.500.12708/94378 ( reposiTUm)

Durakbasa, M. N. (2016). Advanced Integrated Systems In The Product Life Cycle For The Next Generation Of Factories In The Age Of Industry 4.0. 14th Internationale Logistics and Supply Chain Congress, Izmir / TR, Non-EU. http://hdl.handle.net/20.500.12708/94524 ( reposiTUm)

Durakbasa, M. N. (2014). Advanced 3D Metrology of microcomponents and nano-structures - challenges in the nextgeneration manufacturing industry. XIth International Scientific Conference “Coordinate Measuring Technique CMT,” Bielsko Biala, EU. http://hdl.handle.net/20.500.12708/93831 ( reposiTUm)

Davutoglu, C., Durakbasa, M. N., Güclü, E., & Bas, G. (2014). Improved Quality and Reliability in Telecommunication Network Testing by means of a Remote Online Test System. 11th International Conference on Remote Engineering and Virtual Instrumentation REV2014, Porto, Portugal, EU. http://hdl.handle.net/20.500.12708/93886 ( reposiTUm)

Durakbasa, M. N., Bauer, J. M., Bas, G., & Riepl, D. (2014). Micro And Nanometrology Laboratory Applications In Industry And Education By Telepresence And Teleoperation Remotely In The Global Village. 11th International Conference on Remote Engineering and Virtual Instrumentation REV2014, Porto, Portugal, EU. http://hdl.handle.net/20.500.12708/93887 ( reposiTUm)

Durakbasa, M. N. (2013). Innovation and Sophisticated Metrology for Advanced Production Engineering - Integrated Management for Sustainabie Development. International Business Information Management Association Conference (IBIMA), Wien, Österreich, EU. http://hdl.handle.net/20.500.12708/93682 ( reposiTUm)

Durakbasa, M. N., & Bauer, J. M. (2012). Developments in Sophisticated Precision Metrology and the Importance of Nanotechnology for Advanced Industrial and Manufacturing Systems. Iii Caim 2012 Tercer Congreso Argentino De Ingenieria Mecanica, Buenos Aires - Argentinien, Non-EU. http://hdl.handle.net/20.500.12708/93418 ( reposiTUm)

Bauer, J. M., Durakbasa, M. N., & Bas, G. (2012). Multi Functional Intelligent Measurement Robot, As a Part of a Global Quality Management System for Collaboration Between Small, Medium and Large Scale Enterprises. QIEM 2nd International Conference on Quality and Innovation in Engineering and Management, Cluj-Napoca, RO, EU. http://hdl.handle.net/20.500.12708/93532 ( reposiTUm)

Durakbasa, M. N., Yurci, M. E., Akdogan, A., & Yildirim, S. B. (2012). Surface Roughness Measurement Uncertainties Both in Tactile and Optical Instruments. QIEM 2nd International Conference on Quality and Innovation in Engineering and Management, Cluj-Napoca, RO, EU. http://hdl.handle.net/20.500.12708/93531 ( reposiTUm)

Durakbasa, M. N., Bauer, J. M., Bas, G., & Riepl, D. (2012). Telepresence and Teleoperation in Work Concept of Multifunctional Intelligent Factories: Experience of Telepresence in the Micro and Nano Metrology Laboratory AuM-TU-Wien. QIEM 2nd International Conference on Quality and Innovation in Engineering and Management, Cluj-Napoca, RO, EU. http://hdl.handle.net/20.500.12708/93533 ( reposiTUm)

Yurci, C., Gunay Bulutsuz, A., & Durakbasa, M. N. (2012). Performance Determination and Calibration of CMMs on the Basis of GPS Standards. QIEM 2nd International Conference on Quality and Innovation in Engineering and Management, Cluj-Napoca, RO, EU. http://hdl.handle.net/20.500.12708/93535 ( reposiTUm)

Koyun, A., Yurci, M. E., Sagbas, B., & Durakbasa, M. N. (2012). Evaluation of temperature rise within articulating surfaces of artificial hip joint materials. QIEM 2nd International Conference on Quality and Innovation in Engineering and Management, Cluj-Napoca, RO, EU. http://hdl.handle.net/20.500.12708/93560 ( reposiTUm)

Durakbasa, M. N., Osanna, P. H., & Bas, G. (2012). Intelligent Design and Advanced Metrology to Support and Improve Integrated Management Systems for Quality, Environment and Energy in Production Engineering. QIEM 2nd International Conference on Quality and Innovation in Engineering and Management, Cluj-Napoca, RO, EU. http://hdl.handle.net/20.500.12708/93414 ( reposiTUm)

Durakbasa, M. N. (2012). Developments in Precision and Nano Metrology to Support and Improve Integrated Management Systems for Quality, Environment and Energy. CEO/CTO/NGO - PNU Pusan National University, School of Mechanical Engineering and the LINC, Busan - Südkorea, Non-EU. http://hdl.handle.net/20.500.12708/93396 ( reposiTUm)

Durakbasa, M. N. (2011). Nano Teknolojİ Ve Nano Metrolojİ - Modern Hassas İmalat MühendİslİĞİnde İlerİ Teknolojİler. I Ulusal Kompozit Malzemeler Sempozyumu, Izmir, Non-EU. http://hdl.handle.net/20.500.12708/93311 ( reposiTUm)

Osanna, P. H., & Durakbasa, M. N. (2011). Innovation in Production Metrology for Precision Engineering and to Support Sustainability and Improvement of Process and Product Quality in Modern Manufacturing Industry. 1st International Conference on Quality and Innovation in Engineering and Management QIEM 2011, Cluj-Napoca, RO, EU. http://hdl.handle.net/20.500.12708/93308 ( reposiTUm)

Durakbasa, M. N. (2008). End-of-Life Management für die Nachhaltigkeit moderner Fertigungsprozesse. Info-Veranstaltung: Innovationen für die “Fabrik der Zukunft,” Wien, Austria. http://hdl.handle.net/20.500.12708/92592 ( reposiTUm)

Durakbasa, M. N., Osanna, P. H., Yurci, M. E., & Bauer, J. M. (2008). The Achievement Of Total Quality Management With Global International Cooperation Of Collaborating Small And Medium Sized Companies. 2nd INTERNATIONAL CONGRESS ON ENTREPRENEURSHIP, Bishkek, Non-EU. http://hdl.handle.net/20.500.12708/92733 ( reposiTUm)

Hochschulschriften

Durakbasa, N. M. (2003). Geometrical product specifications and verification for the analytical description of technical and non-technical structures [Professorial Dissertation, Technische Universität Wien]. reposiTUm. http://hdl.handle.net/20.500.12708/178690 ( reposiTUm)