Tschegg, E., Merta, I., Fitsch, U., Lewis, G., & Kühn, K.-D. (2017). Influence of Powder Sterilization Method on Properties of PMMA Bone Cement Using Novel Wedge-splitting Test Compact Tension Method. Current Applied Polymer Science, 1(2). https://doi.org/10.2174/2452271601666170815123947 ( reposiTUm)

Merta, I., Berger, L., Heidfogel, G., Kuhn, K.-D., Lewis, G., & Tschegg, E. (2017). Size and boundary effects on notch tensile strength and fracture properties of PMMA bone cement. Polymer Testing, 59, 441–448. http://hdl.handle.net/20.500.12708/146503 ( reposiTUm)

Tschegg, E. K., Schneemayer, A., Merta, I., & Rieder, K. A. (2015). Energy dissipation capacity of fibre reinforced concrete under biaxial tension-compression load. Part II: Determination of the fracture process zone with the acoustic emission technique. Cement and Concrete Composites, 62, 187–194. https://doi.org/10.1016/j.cemconcomp.2015.07.003 ( reposiTUm)

Tschegg, E. K., Schneemayer, A., Merta, I., & Rieder, K. A. (2015). Energy dissipation capacity of fibre reinforced concrete under biaxial tension-compression load. Part I: Test equipment and work of fracture. Cement and Concrete Composites, 62, 195–203. https://doi.org/10.1016/j.cemconcomp.2015.07.002 ( reposiTUm)

Celarek, A., Fischerauer, S. F., Weinberg, A. M., & Tschegg, E. (2014). Fracture patterns of the growth plate and surrounding bone in the ovine knee joint at different ages. Journal of the Mechanical Behavior of Biomedical Materials, 29, 286–294. http://hdl.handle.net/20.500.12708/156006 ( reposiTUm)

Berger, L., Fischerauer, S. F., Weiß, B., Celarek, A., Castellani, C., Weinberg, A.-M., & Tschegg, E. (2014). Unlocked and locked elastic stable intramedullary nailing in an ovine tibia fracture model: A biomechanical study. Materials Science and Engineering: C, 40, 267–274. http://hdl.handle.net/20.500.12708/156548 ( reposiTUm)

Schneemayer, A., Schranz, C., Tschegg, E., & Kolbitsch, A. (2014). Ein- und zweiaxiales Bruchverhalten von Mauermörtel in Ziegelmauerwerk. Mauerwerk, 18, 90–97. http://hdl.handle.net/20.500.12708/156503 ( reposiTUm)

Schneemayer, A., Schranz, C., Kolbitsch, A., & Tschegg, E. K. (2014). Fracture-Mechanical Properties of Mortar-to-Brick Interfaces. Journal of Materials in Civil Engineering, 26(9). https://doi.org/10.1061/(asce)mt.1943-5533.0000955 ( reposiTUm)

Schneemayer, A., Schranz, C., Tschegg, E., & Kolbitsch, A. (2014). Entwicklung der Resttragfähigkeit von Mauerwerk unter zyklischen horizontalen Lasten. Bauingenieur, 89, 4–8. http://hdl.handle.net/20.500.12708/156502 ( reposiTUm)

Gräf, V., Jamek, M., Rohatsch, A., & Tschegg, E. (2013). Effects of thermal-heating cycle treatment on thermal expansion behavior of different building stones. International Journal of Rock Mechanics and Mining Sciences, 64, 228–235. https://doi.org/10.1016/j.ijrmms.2013.08.007 ( reposiTUm)

Merta, I., & Tschegg, E. K. (2013). Fracture energy of natural fibre reinforced concrete. Construction and Building Materials, 40, 991–997. https://doi.org/10.1016/j.conbuildmat.2012.11.060 ( reposiTUm)

Tschegg, E., Celarek, A., Fischerauer, S. F., Stanzl-Tschegg, S., & Weinberg, A. M. (2012). Fracture properties of growth plate cartilage compared to cortical and trabecular bone in ovine femora. Journal of the Mechanical Behavior of Biomedical Materials, 14(14), 119–129. http://hdl.handle.net/20.500.12708/164620 ( reposiTUm)

Celarek, A., Kraus, T., Tschegg, E. K., Fischerauer, S. F., Stanzl-Tschegg, S., Uggowitzer, P. J., & Weinberg, A. M. (2012). PHB, crystalline and amorphous magnesium alloys: Promising candidates for bioresorbable osteosynthesis implants? Materials Science and Engineering: C, 32(6), 1503–1510. https://doi.org/10.1016/j.msec.2012.04.032 ( reposiTUm)

Jamek, M., Tschegg, E., & Lugmayr, R. (2012). Mechanical and fracture-mechanical properties of geosynthetic reinforced asphalt systems. Fatigue and Fracture of Engineering Materials and Structures, 21.3.2012, 1–10. http://hdl.handle.net/20.500.12708/163476 ( reposiTUm)

Tschegg, E. K., Jamek, M., & Lugmayr, R. (2012). Crack growth behaviour in geosynthetic asphalt interlayer systems. Road Materials and Pavement Design, 13(1), 156–170. https://doi.org/10.1080/14680629.2011.644414 ( reposiTUm)

Tschegg, E. K., Jamek, M., & Lugmayr, R. (2011). Fatigue crack growth in asphalt and asphalt-interfaces. Engineering Fracture Mechanics, 78(6), 1044–1054. https://doi.org/10.1016/j.engfracmech.2011.02.007 ( reposiTUm)

Castellani, C., Lindtner, R. A., Hausbrandt, P., Tschegg, E., Stanzl-Tschegg, S. E., Zanoni, G., Beck, S., & Weinberg, A.-M. (2011). Bone-implant interface strength and osseointegration: Biodegradable magnesium alloy versus standard titanium control. Acta Biomaterialia, 7(1), 432–440. https://doi.org/10.1016/j.actbio.2010.08.020 ( reposiTUm)

Tschegg, E., Lindtner, R. A., Doblhoff-Dier, V., Stanzl-Tschegg, S. E., Holzlechner, G., Castellani, C., Imwinkelried, T., & Weinberg, A. (2011). Characterization methods of bone-implant-interfaces of bioresorbable and titanium implants by fracture mechanical means. Journal of the Mechanical Behavior of Biomedical Materials, 4(5), 766–775. https://doi.org/10.1016/j.jmbbm.2010.08.004 ( reposiTUm)

Stanzl-Tschegg, S., Eichinger, K., Weidner, A., Tschegg, E., Bernardi, J., & Schönbauer, B. (2011). Role of impurities and PSBs on microcracking of polycrystalline copper at very high numbers of cycles. Key Engineering Materials, 465, 29–34. https://doi.org/10.4028/www.scientific.net/kem.465.29 ( reposiTUm)

Tschegg, E. K., Bohner, E., Tritthart, J., & Müller, H. S. (2011). Investigations into fracture of carbonated concrete. Magazine of Concrete Research, 63(1), 21–30. https://doi.org/10.1680/macr.2011.63.1.21 ( reposiTUm)

Jamek, M., Tschegg, E., & Stamminger, O. (2011). Fracture-Mechanical Characterization of Parquet-Adhesive-Screed Systems. Journal of Testing and Evaluation, 39(3), 1–6. http://hdl.handle.net/20.500.12708/161950 ( reposiTUm)

Stanzl-Tschegg, S. E., Keunecke, D., & Tschegg, E. K. (2011). Fracture tolerance of reaction wood (yew and spruce wood in the TR crack propagation system. Journal of the Mechanical Behavior of Biomedical Materials, 4(5), 688–698. https://doi.org/10.1016/j.jmbbm.2010.11.010 ( reposiTUm)

Tschegg, E., Fendt, K. T., Manhart, Ch., & Harmuth, H. (2010). Fracture Properties of Refractory Materials under Uniaxial and Biaxial Loading. ASTIN Bulletin: The Journal of the IAA, 1(1), 40–47. http://hdl.handle.net/20.500.12708/167537 ( reposiTUm)

Tschegg, E., & Krec, K. (2010). Nondeformability of Ventelated and Mortar-Embedded Marble Façade Panels. Journal of Performance of Constructed Facilities, JANUARY/FEBRUARY 2010(1), 19–30. http://hdl.handle.net/20.500.12708/167535 ( reposiTUm)

Kyun Lirn, W., KiI Jeong, W., & Tschegg, E. (2010). Failure of fibrous anisotropic materials under combined loading. COMPOSITES PART B-ENGINEERING, PART B 41 (2010)(41), 94–97. http://hdl.handle.net/20.500.12708/167534 ( reposiTUm)

Schüller, M., Herndler, S., Weninger, P., Jamek, M., Redl, H., & Tschegg, E. (2008). Stiffness and permanent deformation of extra-articular distal tibia fractures treated with unreamed small diameter intramedullary nailing. Materials Science and Engineering: C, 28(8), 1209–1217. http://hdl.handle.net/20.500.12708/170881 ( reposiTUm)

Tschegg, E., Herndler, S., Weninger, P., Jamek, M., Stanzl-Tschegg, S., & Redl, H. (2008). Stiffness analysis of tibia-implant system under cyclic loading. Materials Science and Engineering: C, 28(8), 1203–1208. http://hdl.handle.net/20.500.12708/170891 ( reposiTUm)

Tschegg, E., Macht, J., Jamek, M., & Steigenberger, J. (2007). Mechanical and Fracture-Mechanical Properties of Asphalt-Concrete Interfaces. ACI Materials Journal, VOL. 104(No. 5), 474–480. http://hdl.handle.net/20.500.12708/169148 ( reposiTUm)

Merta, I., Schneemayer, A., Rieder, K. A., & Tschegg, E. (2016). Correlation between the energy dissipation capacity and the extend of the fracture process zone of fibre reinforced concrete. In FRC: The Modern Landscape (pp. 367–375). RILEM Publications S.A.R.L. http://hdl.handle.net/20.500.12708/61969 ( reposiTUm)

Merta, I., & Tschegg, E. (2013). Uniaxial Fracture Energy of Waste Tyre Rubber Concrete. In J. G. M. van Mier, C. Andrade, G. Ruiz, R. C. Yu, & X. Zhang (Eds.), Fracture Mechanics of Concrete and Concrete Structures. http://hdl.handle.net/20.500.12708/61025 ( reposiTUm)

Schneemayer, A., Tschegg, E., & Kolbitsch, A. (2012). Bruchmechanische Werte für Mörtel-Ziegel-Verbunde (Interfaces). In Ibausil (pp. 1010–1017). http://hdl.handle.net/20.500.12708/60938 ( reposiTUm)

Höflinger, M., Tschegg, E., Rohatsch, A., & Kolbitsch, A. (2012). Risswiderstand an geklebten Gesteinsstücken von eingespannten (auskragenden) Naturstein-Keilstufen. In IBAUSIL 2012 (pp. 2-0912-2–0919). http://hdl.handle.net/20.500.12708/60953 ( reposiTUm)

Merta, I., Kopecsko, K., & Tschegg, E. (2012). Durability of hemp fibers in the alkaline environment of cement matrix. In J. Barros, J. Sena-Cruz, R. Ferreira, I. Valente, M. Azenha, & S. Dias (Eds.), Fibre Reinforced Concrete: challenges and opportunities (pp. 1–8). RILEM Publications S.A.R.L. http://hdl.handle.net/20.500.12708/60748 ( reposiTUm)

Merta, I., & Tschegg, E. (2012). Uniaxial Fracture Energy of Natural Fibre Concrete. In D. H. Bager & J. Silfwerbrand (Eds.), Concrete Structures for Sustainable Community (pp. 491–494). http://hdl.handle.net/20.500.12708/60749 ( reposiTUm)

Merta, I., Tschegg, E., Tschegg, S., & Kolbitsch, A. (2011). Fracture Machanics Of Concrete Reinforced With Hemp, Straw And Elephant Grass Fibres. In Composite Materials: Key to the Future. The 18th International Conference on Composite Materials, Jeju Island, Korea, Non-EU. http://hdl.handle.net/20.500.12708/60664 ( reposiTUm)

Tschegg, S., Eichinger, K., Weidner, A., Tschegg, E., Bernardi, J., & Schönbauer, B. (2011). Role of Impurities and PSBs on Microcracking of Polycrystalline Copper at Very High Numbers of Cycles. In Materials Structure & Micromechanics of Fracture IV (pp. 29–34). Trans Tech Publications. https://doi.org/10.4028/www.scientific.net/KEM.465.29 ( reposiTUm)

Merta, I., Tschegg, E., & Kolbitsch, A. (2010). Fracture Mechanical Properties of Concrete Reinforced with Straw Fibres. In S. Tschegg & R. Seidel (Eds.), Principles and Development of Bio-Inspired Materials (pp. 145–146). http://hdl.handle.net/20.500.12708/60433 ( reposiTUm)

Lugmayr, R., & Tschegg, E. (2009). Mechanism of fatigue crack growth and fracture behavior in bituminous roads. In Advanced Testing and Characterisation of Bituminous Materials. 7th International Rilem Symposium ATCBM09 on Acvanced Testind and Characterization of Bituminous Materials, Rhodes, Greece, EU. CRC Press; Taylor and Francis Group. http://hdl.handle.net/20.500.12708/60040 ( reposiTUm)

Lugmayr, R., Jamek, M., & Tschegg, E. (2009). Mechanical and fracture mechanical properties of asphalt geosynthetic interlayer systems. In Proceedings of the Sixt International Conference on Maintenance and Rehabilitation of Pavements and Technological Control. Sixt International Conference on Maintenance and Rehabilitation of Pavements and Technological Control MAIREPAV6, Torino, Italy, EU. http://hdl.handle.net/20.500.12708/60041 ( reposiTUm)

Macht, J., Tschegg, E., Jamek, M., & Steigenberger, J. (2006). White Topping - Assessment of Asphalt Concrete Interfaces. In A century of experience “The way ahead is concrete” (pp. 1–5). http://hdl.handle.net/20.500.12708/44271 ( reposiTUm)

Tschegg, E., Jamek, M., Seebach, G., & Aufhauser, F. (2006). Bruchmechanische Eigenschaften von Marmor-Mörtel-Verbundsysteme. In ibausil (pp. 1–18). http://hdl.handle.net/20.500.12708/44270 ( reposiTUm)

Loidl, D., Tschegg, E., & Stanzl-Tschegg, S. E. (2006). Fracturing of wood under Torsional Loading Fracture Mechanismus and Mechanics. In E. E. Gdoutos (Ed.), Fracture of Nano and Engineering Materials and Structures (pp. 1–8). http://hdl.handle.net/20.500.12708/44268 ( reposiTUm)

Tschegg, E., Denk, F., & Eppensteiner, W. (2006). Laboruntersuchungen über AAR im Beton mit verschiedenen Gesteinskörnungen aus dem Osten von Österreich. In ibausil (pp. 1–16). http://hdl.handle.net/20.500.12708/44269 ( reposiTUm)

Eichler, J., Berger, L., Fischerauer, S. F., Weiß, B., Celarek, A., Castellani, C., Weinberg, A. M., & Tschegg, E. (2014). Biomechanical Comparison Of Fatigue And Load-Bearing Performance Of Locked And Unlocked Elastic Stable Intramedullary Nailing. 33 Annual Meeting European Paedriatic Orthopaedic Society, Brügge, Belgium. http://hdl.handle.net/20.500.12708/113014 ( reposiTUm)

Meischel, M., Celarek, A., Berger, L., Tschegg, E., Weinberg, A. M., & Tschegg, S. (2013). Biocompatibility and Degradation of Implants. Project Laura Bassi BRIC Hearing, Wien, Austria. http://hdl.handle.net/20.500.12708/113198 ( reposiTUm)

Meischel, M., Tschegg, S., Berger, L., Tschegg, E., Fischer, L., Prohaska, T., Martinelli, E., & Weinberg, A. (2013). Measurment of Mechanical Properties and Cossosion Products of Magnesium Alloy WZ21. Jahrestag der Deutschen Gesellschaft für Biomaterialien 2013, Erlangen, Germany. http://hdl.handle.net/20.500.12708/112732 ( reposiTUm)

Castellani, C., Berger, L., Fischerauer, S. F., Celarek, A., Tschegg, E., & Weinberg, A. (2013). Stability of Esin Interlocking Systems. 14th Congress of the European Paediatric Surgeons’ Association, Leipzig, Germany. http://hdl.handle.net/20.500.12708/112734 ( reposiTUm)

Weiß, B., Berger, L., Fischerauer, S. F., Weinberg, A.-M., & Tschegg, E. (2013). Esin In Ovine Tibia - A Biomechanical Analysis Under Axial Load And Torsion. ESB Congress 2013, Patras, Greece. http://hdl.handle.net/20.500.12708/112716 ( reposiTUm)

Berger, L., Fischerauer, S. F., Castellani, C., Weinberg, A., & Tschegg, E. (2013). Mechanical strength of ESIN interlocking systems treating paediatric femur fractures. 5th International Conference on Mechanics of Biomaterials and Tissues, Sitges, Spain. http://hdl.handle.net/20.500.12708/112878 ( reposiTUm)

Harmuth, H., & Tschegg, E. (2012). Fractographic and Fracture Mechanical Investigations of refractories under different loading conditions. The 6th Intern. Symposium on Refrectories, Zhengzhou, China, Non-EU. http://hdl.handle.net/20.500.12708/112544 ( reposiTUm)

Tschegg, E., Celarek, A., Fischerauer, S. F., Stanzl-Tschegg, S. E., & Weinberg, A.-M. (2012). Fracture properties of growth plate and bone. ICEFA V - Fifth International Conference on Engineering Failure Analysis, Hague, Netherlands, EU. http://hdl.handle.net/20.500.12708/112499 ( reposiTUm)

Berger, L., Weiß, B., Fischerauer, S. F., Castellani, C., Weinberg, A., & Tschegg, E. (2012). Mechanical properties of Elastic Stable Intramedullary Nailing in Ovine Tibia. 5th Vienna Biomaterials Symposium, Wien, Austria. http://hdl.handle.net/20.500.12708/112550 ( reposiTUm)

Tschegg, S., Schänbauer, B., & Tschegg, E. (2012). Corrosion-Fatigue Damage and Life Prediction for Steam Turbine Blades. Electric Power Research Institute, Boston, United States of America (the). http://hdl.handle.net/20.500.12708/112543 ( reposiTUm)

Tschegg, E., & Tschegg, S. (2012). Fracture Properties of Growth Plate and Bone. Seminar of Institute Mechanical Engineering, Fukuaka University, Japan. http://hdl.handle.net/20.500.12708/112542 ( reposiTUm)

Tschegg, S., & Tschegg, E. (2012). Ultrasonic Fatigue Testing Technique. Seminar of Institute Mechanical Engineering, Fukuaka University, Japan, Japan. http://hdl.handle.net/20.500.12708/112540 ( reposiTUm)

Tschegg, E., & Tschegg, S. (2012). Bio-Resorbable Bone Implants. Seminar of Institute Mechanical Engineering, Fukuaka University, Japan. http://hdl.handle.net/20.500.12708/112541 ( reposiTUm)

Schneemayer, A., Posler, H. P., Peyerl, M., & Tschegg, E. (2011). Oberflächenrauheit an Baustoffen mittels stereoskopischem Verfahren. Kolloquium 2011 - Forschung & Entwicklung für Zement und Beton, Wien, Austria. http://hdl.handle.net/20.500.12708/112051 ( reposiTUm)

Tschegg, E., Stanzl-Tschegg, S. E., Weinberg, A., Hausbrandt, P., & Lindtner, R. (2010). Vergleichende biomechanische und mikro-computertomographische Untersuchung des Einheilverhaltens bioresorbierbarer Magnesium-Pins und konventioneller Titan-Implantate im transkortikalen Rattenmodell. Deutscher Kongress für Orthopädie und Unfallchirurgie, Berlin, Germany. http://hdl.handle.net/20.500.12708/111719 ( reposiTUm)

Tschegg, E. (2006). Ursachen mangelnder Formbeständigkeit von Marmorplatten. Alpina, Adelboden, Schweiz, Non-EU. http://hdl.handle.net/20.500.12708/126077 ( reposiTUm)

Tschegg, E. (2006). Bruchmechanische Eigenschaften von Marmor-Mörtel-Verbundsysteme, Fall Otto Wagner Kirche, Steinhof. Tagung: Kristalliner Marmor - Herkunft, Verwendung und Restaurierung, Bundesdenmalamt, Arsenal Wien, Austria. http://hdl.handle.net/20.500.12708/126080 ( reposiTUm)

Krassnitzer, T., & Tschegg, E. (2006). Bruchmechanische Untersuchungen an Verklebharzen. 30. Symposium für Segelflugzeugentwicklung, TU Darmstadt, Gebäude S03 05, Frauenhoferstr. 6, Darmstadt, Deutschland, EU. http://hdl.handle.net/20.500.12708/126079 ( reposiTUm)

Tschegg, E. (2006). Bioaxiales Bruchverhalten von stahlfaserverstärktem Beton. Kolloquium Forschung & entwicklung für Zement und Beton, VÖZ Wien, Reiserstr. 37, Austria. http://hdl.handle.net/20.500.12708/126078 ( reposiTUm)

Stanzl-Tschegg, S. E., Frühmann, K., & Tschegg, E. (2005). Fracture and Microstructure of Wood. 11th Intern. Conference on Fracture (ICF-11), Turin, EU. http://hdl.handle.net/20.500.12708/125877 ( reposiTUm)

Tschegg, E. (2005). Keilspaltmethode - Können bruchmechanische Werte bei Rissbildung und Abplatzungen gewonnen werden? DFG-Forschergruppentreffen, Karlsruhe/ Deutschland, EU. http://hdl.handle.net/20.500.12708/125874 ( reposiTUm)

Tschegg, E. (2005). Dämpfung an wasserstoffversprödeten Stahlnägel. Werstoffseminar im Forschungszentrum der Firma HILTI, Schaan/ Lichtenstein, Non-EU. http://hdl.handle.net/20.500.12708/125873 ( reposiTUm)

Tschegg, E., & Frühmann, K. (2004). Mode I, II, III fracture in wood: principle and experimental technique. COST Action E35, Workshop WG1 & WG2, Vila Real, Portugal, Austria. http://hdl.handle.net/20.500.12708/125092 ( reposiTUm)

Tschegg, E. (2004). Wedge splitting technique in mechanical and hydraulic testing machines and in situ tests in ESEM. COST Action E35, Workshop WG1 & WG2, Vila Real, Portugal, Austria. http://hdl.handle.net/20.500.12708/125093 ( reposiTUm)

Tschegg, E. (2004). Wasserversprödung an Stahlnägeln im Bauwesen. Werkstoffseminar im Forschungszentrum der Firma HILTI, Schaan, Liechtenstein, Austria. http://hdl.handle.net/20.500.12708/125094 ( reposiTUm)

Stanzl-Tschegg, S. E., & Tschegg, E. (2002). Frequency effects on Fatigue Cracks Growth in the very High Cycle Regime. ECF-14 Fracture Mechanics Beyond 2000, Cracow, Poland, Austria. http://hdl.handle.net/20.500.12708/123630 ( reposiTUm)

Stanzl-Tschegg, S. E., & Tschegg, E. (2002). Fracture mechanics and micro mechanics of wood and wood compounds with regard to wood modelling. COST TC meeting, Helsinki, Austria. http://hdl.handle.net/20.500.12708/123631 ( reposiTUm)

Sommer, H., Hartl, G., & Tschegg, E. (2002). Überarbeitung der RVS 8.05.13 “Zementstabilisierte Tragschichten.” http://hdl.handle.net/20.500.12708/31879 ( reposiTUm)

Tschegg, E., Jamek, M., & Stanzl-Tschegg, S. E. (2002). Bruch- und Selbstheilungsverhalten von Asphalt und Asphaltverbunden. http://hdl.handle.net/20.500.12708/31878 ( reposiTUm)