Linz, M., Rodríguez Ripoll, M., Pauly, C., Bernardi, J., Steiger-Thirsfeld, A., Franek, F., Mücklich, F., & Gachot, C. (2018). Heterogeneous Strain Distribution and Saturation of Geometrically Necessary Dislocations in a Ferritic-Pearlitic Steel during Lubricated Sliding. Advanced Engineering Materials, 20(4), Article 1700810. https://doi.org/10.1002/adem.201700810 ( reposiTUm)

Linz, M., Rodríguez Ripoll, M., Gachot, C., Pauly, C., Franek, F., & Mücklich, F. (2017). On the competition between plastic deformation and material detachment in ferritic/pearlitic steel under boundary lubrication. Wear, 376–377, 813–821. https://doi.org/10.1016/j.wear.2017.01.095 ( reposiTUm)

Sequard-Base, J., Haas, R., Tomastik, C., Vernes, A., & Franek, F. (2017). Barrel Friction in Sport Rifles. Tribology Letters, 66(3). https://doi.org/10.1007/s11249-017-0951-4 ( reposiTUm)

Bedolla, P. O., Vorlaufer, G., Sequard-Base, P., Vernes, A., & Franek, F. (2017). Altitude dependence of electrohydrodynamic flow in an electrostatic lifter. Journal of Electrostatics, 87, 32–44. https://doi.org/10.1016/j.elstat.2017.03.003 ( reposiTUm)

Neacşu, I. A., Scheichl, B., Vorlaufer, G., Eder, S. J., Franek, F., & Ramonat, L. (2016). Experimental validation of the simulated steady-state behaviour of porous journal bearings. Journal of Tribology, 138(3). https://doi.org/10.1115/1.4032659 ( reposiTUm)

Rodríguez Ripoll, M., Scheichl, B., Bianchi, D., Jakab, B., & Franek, F. (2014). Development of a mechanical model of doctor-blade roll tribosystem with aim to optimise cleaning performance: numerical predictions and first experimental verification. Tribology: Materials, Surfaces & Interfaces, 8(1), 41–47. https://doi.org/10.1179/1751584x14y.0000000062 ( reposiTUm)

Laumann, S., Jisa, R., Deinhofer, G., & Franek, F. (2014). Tribological properties of brass materials and their application for cages in rolling bearings. Tribology: Materials, Surfaces & Interfaces, 8(1), 35–40. https://doi.org/10.1179/1751584x13y.0000000052 ( reposiTUm)

Pirghie, C., Pirghie, A. C., Eder, S., & Franek, F. (2013). PFPE-Z lubricant thin films in molecular dynamics simulations - shear thinning and friction law. Optoelectronics And Advanced Materials - Rapid Communications, VOL.7(No. 5-6), 434–438. http://hdl.handle.net/20.500.12708/156325 ( reposiTUm)

Ilincic, S., Vernes, A., Vorlaufer, G., Hunger, H., Dörr, N., & Franek, F. (2013). Numerical estimation of wear in reciprocating tribological experiments. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 227(5), 510–519. https://doi.org/10.1177/1350650113476606 ( reposiTUm)

Ripoll, M. R., Scheichl, B., Jakab, B., & Franek, F. (2013). Modelling the Doctor Blade-Roller Tribosystem for Improving the Cleaning Performance During Paper Production. Tribology Letters, 51(2), 199–205. https://doi.org/10.1007/s11249-013-0120-3 ( reposiTUm)

Peuker, C., Badisch, E., Franek, F., & Bartz, W. (2012). Einfluss der effektiven Viskosität beim Gewindeformen. Tribologie Und Schmierungstechnik, 1, 17–22. http://hdl.handle.net/20.500.12708/164895 ( reposiTUm)

Corniani, E., Jech, M., Wopelka, T., Ditroi, F., Franek, F., & Pauschitz, A. (2012). High-resolution wear analysis of a ball-on-disc contact using low-activity radioactive isotopes. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 226(2), 319–326. https://doi.org/10.1177/0954406211424865 ( reposiTUm)

Roy, M., Ghodbane, S., Koch, T., Pauschitz, A., Steinmüller-Nethl, D., Tomala, A., Tomastik, C., & Franek, F. (2011). Tribological investigation of nanocrystalline diamond films at low load under different tribosystems. Diamond and Related Materials, 20(4), 573–583. https://doi.org/10.1016/j.diamond.2011.02.012 ( reposiTUm)

Ilincic, S., Tungkunagorn, N., Vernes, A., Vorlaufer, G., Fotiu, P. A., & Franek, F. (2011). Finite and boundary element method contact mechanics on rough, artificial hip joints. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 225(11), 1081–1091. https://doi.org/10.1177/1350650111406776 ( reposiTUm)

Schneider, A., Steinmueller-Nethl, D., Roy, M., & Franek, F. (2010). Enhanced tribological performances of nanocrystalline diamond film. International Journal of Refractory Metals and Hard Materials, 28(1), 40–50. https://doi.org/10.1016/j.ijrmhm.2009.07.010 ( reposiTUm)

Badisch, E., Katsich, C., Winkelmann, H., Franek, F., & Roy, M. (2010). Wear behaviour of hardfaced Fe-Cr-Calloy and austenitic steel under 2-body and 3-body conditions at elevated temperature. Tribology International, 43(7), 1234–1244. https://doi.org/10.1016/j.triboint.2010.01.008 ( reposiTUm)

Schneider, A., Brenner, J., Tomastik, C., & Franek, F. (2010). Capacity of selected ionic liquids as alternative EP/AW additive. Lubrication Science, 22(6–7), 215–223. https://doi.org/10.1002/ls.120 ( reposiTUm)

Dörr, N., Gebeshuber, I. C., Holzer, D., Wanzenböck, H. D., Ecker, A., Pauschitz, A., & Franek, F. (2010). Evaluation of Ionic Liquids as Lubricants. Journal of Microengineering and Nanoelectronics, 1(1), 29–34. http://hdl.handle.net/20.500.12708/167270 ( reposiTUm)

Jisa, R., Ristic, A., Brenner, J., Lebersorger, T., Ilo, S., Neumayer, H., & Franek, F. (2010). Effectiveness of lubricant additives for copper-alloy-steel sliding contacts. Lubrication Science, 22(5), 183–193. https://doi.org/10.1002/ls.118 ( reposiTUm)

Katsich, C., Badisch, E., Roy, M., Heath, G. R., & Franek, F. (2009). Erosive wear of hardfaced Fe-Cr-C alloys at elevated temperature. Wear, 267(11), 1856–1864. https://doi.org/10.1016/j.wear.2009.03.004 ( reposiTUm)

Franek, F., Vorlaufer, G., Edelbauer, W., & Bukovnik, S. (2009). Simulation of Tribosystems and Tribometrology. Tribology in Industry, 29(1 & amp; 2), 3–12. http://hdl.handle.net/20.500.12708/166472 ( reposiTUm)

Schneider, A., Brenner, J., Steinmüller-Nethl, D., Roy, M., & Franek, F. (2009). Tribological properties of lubricated nanocrystalline diamond surfaces for various loads and geometries. Tribology: Materials, Surfaces & Interfaces, 3, 175–181. http://hdl.handle.net/20.500.12708/168042 ( reposiTUm)

Badisch, E., Winkelmann, H., & Franek, F. (2009). High-temperature cyclic impact abrasion testing: wear behaviour of single and multiphase materials up to 750 °C. Estonian Journal of Engineering, 15(4), 359. https://doi.org/10.3176/eng.2009.4.13 ( reposiTUm)

Franek, F., & Pauschitz, A. (2009). Metallische und polymere Gleitelemente am Beispiel ausgewählter tribologischer Untersuchungen. Tribologie Und Schmierungstechnik, 56(5), 5–23. http://hdl.handle.net/20.500.12708/166466 ( reposiTUm)

Matzner, A., Abraham, G., Hornof, M., Klima, T., Lech, M., Novak, G., & Franek, F. (2009). Miniaturisiertes taktiles Tribometer. Tribologie Und Schmierungstechnik, 56(3), 39–43. http://hdl.handle.net/20.500.12708/166467 ( reposiTUm)

Ilincic, S., Vorlaufer, G., Fotiu, P. A., Vernes, A., & Franek, F. (2009). Combined finite element-boundary element method modelling of elastic multi-asperity contacts. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 223(5), 767–776. https://doi.org/10.1243/13506501jet542 ( reposiTUm)

Corniani, E., Jech, M., Ditroi, F., Wopelka, T., & Franek, F. (2009). TLA and wear quantification of an aluminium-silicon-copper alloy for the car industry. Wear, 267(5–8), 828–832. https://doi.org/10.1016/j.wear.2009.02.007 ( reposiTUm)

Franek, F., Vorlaufer, G., Stadler, A., Jech, M., & Wopelka, T. (2009). Modelling and Simulation Assisted Tribometrology. Tribology in Industry, 30(3 & amp; 4), 37–47. http://hdl.handle.net/20.500.12708/166471 ( reposiTUm)

Badisch, E., Kirchgaßner, M., & Franek, F. (2009). Continuous impact/abrasion testing: influence of testing parameters on wear behaviour. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 223(5), 741–750. https://doi.org/10.1243/13506501jet535 ( reposiTUm)

Franek, F., Badisch, E., & Kirchgaßner, M. (2009). Advanced Methods for Characterisation of Abrasion/Erosion Resistance of Wear Protection Materials. FME Transactions, 37(2), 61–70. http://hdl.handle.net/20.500.12708/166457 ( reposiTUm)

Pauschitz, A., Roy, M., & Franek, F. (2008). Mechanisms of sliding wear of metals and alloys at elevated temperatures. Tribology International, 41(7), 584–602. https://doi.org/10.1016/j.triboint.2007.10.003 ( reposiTUm)

Franek, F., Neuhaus, A., Reichart, M., & Schrank, C. (2008). Mechatronical systems and experimental methods for investigations on tribology of electrical contacts. Mechanical Systems and Signal Processing, 22(6), 1345–1355. https://doi.org/10.1016/j.ymssp.2007.11.032 ( reposiTUm)

Pauschitz, A., & Franek, F. (2008). Energie- und Werkstoffeffizienz - Forschungsaktivitäten im Österreichischen Kompetenzzentrum für Tribologie. BHM Berg- Und Hüttenmännische Monatshefte, 153(5), 169–174. https://doi.org/10.1007/s00501-008-0370-9 ( reposiTUm)

Kirchgaßner, M., Badisch, E., & Franek, F. (2008). Behaviour of iron-based hardfacing alloys under abrasion and impact. Wear, 265(5–6), 772–779. https://doi.org/10.1016/j.wear.2008.01.004 ( reposiTUm)

Badisch, E., Kirchgaßner, M., Polak, R., & Franek, F. (2008). The comparison of wear properties of different Fe-based hardfacing alloys in four kinds of testing methods. Tribotest, 14(4), 225–233. https://doi.org/10.1002/tt.61 ( reposiTUm)

Reinisch, G., Franek, F., & Judmann, K. (2006). Differences of the Mechanical Setup of Hip Simulators and Their Consequences on the Outcome of Hip Wear Testing. Journal of ASTM International (JAI), 3(8). http://hdl.handle.net/20.500.12708/171786 ( reposiTUm)

Roy, M., Pauschitz, A., Wernisch, J., & Franek, F. (2004). Effect of mating surface on the high temperature wear of 253 MA alloy. MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 55(4), 259–273. http://hdl.handle.net/20.500.12708/174607 ( reposiTUm)

Roy, M., Pauschitz, A., Wernisch, J., & Franek, F. (2004). The influence of temperature on the wear of Cr₃C₂-25(Ni20Cr) coating - comparison between nanocrystalline grains and conventional grain. Wear, 257, 799–811. http://hdl.handle.net/20.500.12708/174606 ( reposiTUm)

Neacșu, I. A., & Scheichl, B. (2017). Numerical simulation of cavitating flow through porous journal bearings: the case of highly permeable seats. In F. Franek, N. Dörr, A. Pauschitz, & E. Badisch (Eds.), Tribologie in Industrie und Forschung (Neue Aufgaben - Innovative Lösungen) / Tribology in Industry and Research (New tasks - Innovative Solutions) (pp. 261–266). Österreichische Tribologische Gesellschaft (ÖTG). http://hdl.handle.net/20.500.12708/67705 ( reposiTUm)

Trauner, D., Schoosleitner, H., & Scheichl, B. (2017). Interplay between external friction and thermo-fluid dynamics of the polymer melt in the backflow barrier of a scre extruder. In F. Franek, N. Dörr, A. Pauschitz, & E. Badisch (Eds.), Tribologie in Industrie und Forschung (Neue Aufgaben - Innovative Lösungen) / Tribology in Industry and Research (New tasks - Innovative Solutions) (pp. 237–244). Österreichische Tribologische Gesellschaft (ÖTG). http://hdl.handle.net/20.500.12708/67706 ( reposiTUm)

Neacșu, I. A., Vorlaufer, G., Eder, S. J., Scheichl, B., & Franek, F. (2016). On the Steady-State Behaviour of Porous Journal Bearings - Bridging the Gap between Simulation and Experiments. In Book of Abstracts (p. 2). University of Leeds. http://hdl.handle.net/20.500.12708/67395 ( reposiTUm)

Franek, F., Dörr, N., Vernes, A., Katsich, C., & Trausmuth, G. (2014). Some Selected Tribological Basics/Fundamentals for Practical Applications - Characterisation and Simulation of Tribocontacts. In Tribology - Industrial and Automotive Lubrication - Book of Synopses 2014 (pp. 1–8). TAE. http://hdl.handle.net/20.500.12708/74322 ( reposiTUm)

Franek, F. (2013). Some Tribological Aspects In Automotive Engineering And Traffic. In Balttrib’ 2013 - VII International Scientific Conference - PROCEEDINGS (pp. 135–140). http://hdl.handle.net/20.500.12708/73938 ( reposiTUm)

Dörr, N., Novotny-Farkas, F., Novotny-Farkas, N., Franek, F., & Hauptkorn, M. (2013). Automotive Lubricants In Russia - A Promising Field Of Activities? In ÖTG Symposium 2013 - Automotive Tribology (pp. 125–131). Österreichsiche Tribologische Gesellschaft. http://hdl.handle.net/20.500.12708/73941 ( reposiTUm)

Rodríguez Ripoll, M., Scheichl, B., Bianchi, D., Jakab, B., & Franek, F. (2013). Development and experimental verification of a numerical model for optimizing the cleaning performance of the doctor blade - roll tribosystem. In Proceedings of 3rd International Conference on Tribology of IFToMM. 3rd International Conference on Tribology of IFToMM, Luleå University of Technology, Sweden, EU. http://hdl.handle.net/20.500.12708/66757 ( reposiTUm)

Guerrieri Paleotti, F. S., & Scheichl, B. (2013). Elasto-Hydrodynamic Lubrication of Machine Elements: the Benefits of the Homogenisation Technique. In F. Franek & A. Pauschitz (Eds.), Symposium 2013 - Automotive Tribology (pp. 149–156). Österreichische Tribologische Gesellschaft. http://hdl.handle.net/20.500.12708/66863 ( reposiTUm)

Cihak-Bayr, U., Jisa, R., Laumann, S., Eberle, R., Keppeler, M., Hofmann, U., & Franek, F. (2013). Tribological Properties Of Copper Alloys Depending On Their Production Route: Mim Versus Casting And Forming. In ÖTG Symposium 2013 - Automotive Tribology (pp. 211–218). Österreichsiche Tribologische Gesellschaft. http://hdl.handle.net/20.500.12708/73942 ( reposiTUm)

Jisa, R., Laumann, S., Cihak-Bayr, U., Eberle, R., Keppeler, M., Hofmann, U., & Franek, F. (2013). Tribologische Eigenschaften von MIM-gefertigten Kupferlegierungen. In 54. Tribologie-Fachtagung (pp. 53/1-53/11). Gesellschaft für Tribologie e.V. http://hdl.handle.net/20.500.12708/73940 ( reposiTUm)

Laumann, S., Jisa, R., Deinhofer, G., Jech, M., & Franek, F. (2013). Tribologische Eigenschaften von Messinglegierungen und deren Anwendung in Wälzlagerkäfigen. In 54. Tribologie-Fachtagung (pp. 52/1-52/9). Gesellschaft für Tribologie e.V. http://hdl.handle.net/20.500.12708/73939 ( reposiTUm)

Franek, F., Badisch, E., & Merstallinger, A. (2012). Research on Tribology Systems under Special Conditions - Hot and Vacuum Tribology. In Tribology - Industrial and Automotive Lubrication - Book of Synopses 2012 (p. 9). TAE. http://hdl.handle.net/20.500.12708/73340 ( reposiTUm)

Franek, F. (2012). Tribology - A Key Technology For The Mobility Sector. In ÖTG SYMPOSIUM 2012 - TRIBOLOGIE und MOBILITÄT (pp. 3–18). Österreichische Tribologische Gesellschaft. http://hdl.handle.net/20.500.12708/73341 ( reposiTUm)

Rodríguez Ripoll, M., Scheichl, B., Jakab, B., & Franek, F. (2012). Modelling the doctor blade - roller tribosystem for improving the cleaning performance during paper production. In Proc. NORDTRIB 2012 (p. 6). http://hdl.handle.net/20.500.12708/66760 ( reposiTUm)

Rodríguez Ripoll, M., Scheichl, B., Jakab, B., & Franek, F. (2012). Optimization of the Cleaning Performance of the Doctor Blade - Roller Tribosystem During Paper Production. In Conference Proceedings - 2012 STLE Annual Meeting & Exhibition (p. 3). Society of Tribologists & Lubrication Engineers (STLE). http://hdl.handle.net/20.500.12708/66539 ( reposiTUm)

Franek, F. (2011). Tribology Activities In Austria - Update 2011. In ECOTRIB ’11 - 3rd European Conference on Tribology (pp. 945–950). OeTG - Österreichische Tribologische Gesellschaft. http://hdl.handle.net/20.500.12708/72686 ( reposiTUm)

Scheichl, B. (2011). On the Inertial/Turbulent Range in Fully Hydrodynamic Lubrication. In F. Franek, W. J. Bartz, A. Pauschitz, J. Vizintin, E. Ciulli, & R. Crockett (Eds.), 3rd European Conference on Tribology (ECOTRIB 2011) and 4th International Conference on Nano-Technology (Viennano `11) - Proceedings (pp. 353–356). The Austrian Tribology Society. http://hdl.handle.net/20.500.12708/66147 ( reposiTUm)

Neacșu, I. A., Scheichl, B., Eder, S., & Vorlaufer, G. (2011). Cavitation in Porous Journal Bearings Lubricated with Ioniq Liquids. In F. Franek, W. J. Bartz, A. Pauschitz, J. Vizintin, E. Ciulli, & R. Crockett (Eds.), 3rd European Conference on Tribology (ECOTRIB 2011) and 4th International Conference on Nano-Technology (Viennano `11) - Proceedings (pp. 681–686). The Austrian Tribology Society. http://hdl.handle.net/20.500.12708/66148 ( reposiTUm)

Neacșu, I. A., & Scheichl, B. (2011). Hydrodynamic Lubrication in Porous Journal Bearings: Comparison Between Experimental and Simulation Data. In F. Franek & A. Pauschitz (Eds.), Symposium 2011 - Tribologie in Industrie und Forschung (pp. 215–220). Österreichische Tribologische Gesellschaft. http://hdl.handle.net/20.500.12708/66377 ( reposiTUm)

Franek, F., Steinschütz, K., Lenauer, C., Besser, C., Dörr, N., & Jech, M. (2011). Der Einfluss auf das Alterungsverhalten von Motorölen durch die künstliche Alterung mit Ethanol-Verbrennungsprodukten. In Reibung, Schmierung und Verschleiß - Forschung und praktische Anwendungen - Band I + II (pp. 63/1-63/6). Gesellschaft für Tribologie e.V. http://hdl.handle.net/20.500.12708/72683 ( reposiTUm)

Peterko, P., Habersohn, C., Lechner, C., Kaminski, H., Jech, M., & Bleicher, F. (2011). Untersuchung des Einflusses des Schlagverdichtens auf die tribologischen Eigenschaften von Metalloberflächen. In F. Franek (Ed.), Proceedings of the ÖTG Symposium 2011 (pp. 49–56). Österreichische Tribologie Gesellschaft. http://hdl.handle.net/20.500.12708/66484 ( reposiTUm)

Jech, M., Tomastik, C., Vernes, A., Pauschitz, A., & Franek, F. (2011). Analyses And Quantification Of Friction And Wear Processes On The Nanometer Scale. In ECOTRIB ’11 - 3rd European Conference on Tribology (pp. 801–804). OeTG - Österreichische Tribologische Gesellschaft. http://hdl.handle.net/20.500.12708/72687 ( reposiTUm)

Ilincic, S., & Franek, F. (2010). Novel scheme to simulate friction between rough surfaces. In Proceedings of the Junior Scientist Conference 2010 (pp. 89–90). http://hdl.handle.net/20.500.12708/71976 ( reposiTUm)

Franek, F. (2010). Tribologie in Technik, Organisation und Gesellschaft. In Tribologie - unterschiedliche Betrachtungen von Reibung und VerschleiR (pp. 20–21). http://hdl.handle.net/20.500.12708/71978 ( reposiTUm)

Franek, F., Ilo, S., Just, Ch., Krenn, S., & Badisch, E. (2010). Verschleiß und Reibung im feucht-abrasiven System. In Reibung, Schmierung und Verschleiß. 51. Tribologie-Fachtagung, Göttingen, D, EU. Gesellschaft für Tribologie e.V. http://hdl.handle.net/20.500.12708/71979 ( reposiTUm)

Franek, F., Zika, T., & Pauschitz, A. (2010). Analyses of rolling bearing raceways with focus on failures due to electric current. In FAILURES OF ROLLING BEARINGS - Proceedings (pp. 18–21). http://hdl.handle.net/20.500.12708/71980 ( reposiTUm)

Franek, F., Pauschitz, A., & Bartz, W. (2010). Activities of Applied Research at the Austrian Center of Competence for Tribology. In Solving Friction and Wear Problems. 17th International Colloquium Tribology, Ostfildern, Deutschland, EU. Technische Akademie Esslingen, Ostfildern. http://hdl.handle.net/20.500.12708/71982 ( reposiTUm)

Besser, C., Dörr, N., Novotny-Farkas, F., & Franek, F. (2010). Optimierung von Motorölen mit erhöhter Biokraftstoff-Kompatibilität. In 1. GyŐrer Tribologie Tagung (pp. 105–116). UNIVERSITAS-GYŐR Nonprofit Kft. http://hdl.handle.net/20.500.12708/71688 ( reposiTUm)

Franek, F., Ilo, S., & Badisch, E. (2010). Using load and temperature response wear maps in un lubricated sliding of steels. In Tribology for Sustainability - Economic, Environmental and Quality of Life. Leeds-Lyon Symposium 2010, Leeds, EU. http://hdl.handle.net/20.500.12708/71687 ( reposiTUm)

Wopelka, T., Corniani, E., Lenauer, C., Jech, M., & Franek, F. (2010). Continuous Wear Measurement of Bearing Balls. In FAILURES OF ROLLING BEARINGS - Proceedings (pp. 82–85). http://hdl.handle.net/20.500.12708/71984 ( reposiTUm)

Wopelka, T., Jech, M., Lenauer, C., Novotny-Farkas, F., & Franek, F. (2010). Comparison of wear measurements of component and engine bench tests using radioactive isotopes. In Reibung, Schmierung und Verschleiß. 51. Tribologie-Fachtagung, Göttingen, D, EU. Gesellschaft für Tribologie e.V. http://hdl.handle.net/20.500.12708/71985 ( reposiTUm)

Corniani, E., Jech, M., Wopelka, T., Ditroi, F., & Franek, F. (2010). Experimental wear volume analysis through Thin Layer Activation (TLA) on AISI-52100 (100Cr6) ball for ball bearings applications. In Tribology for Sustainability - Economic, Environmental and Quality of Life. Leeds-Lyon Symposium 2010, Leeds, EU. http://hdl.handle.net/20.500.12708/71981 ( reposiTUm)

Wopelka, T., Jech, M., & Franek, F. (2010). Findings and General Achievements of WEMESURF. In Solving Friction and Wear Problems. 17th International Colloquium Tribology, Ostfildern, Deutschland, EU. Technische Akademie Esslingen, Ostfildern. http://hdl.handle.net/20.500.12708/71975 ( reposiTUm)

Corniani, E., Jech, M., Marian, V. G., Wopelka, T., Ditroi, F., Vilhena, L. M., Ripol, M. R., Sedlacek, M., & Franek, F. (2010). Impact of Laser Surface Texturing on AI-Si-Cu Cylinder Liners Evaluated Through TLA and nVCT. In Solving Friction and Wear Problems (p. 207). Technische Akademie Esslingen, Ostfildern. http://hdl.handle.net/20.500.12708/71983 ( reposiTUm)

Jech, M., Lenauer, C., Novotny-Farkas, F., Wopelka, T., Ditroi, F., Geringer, B., & Franek, F. (2010). Wear Measurement with Radioactive Isotopes in Component and Engine Bench Test - Impact of Fuel and Bio-Fuel on Lubricating. In J. Takács (Ed.), FISITA 2010 World Automotive Congress (p. 7). OOK Press Printing House, Veszprém, Hungary. http://hdl.handle.net/20.500.12708/66245 ( reposiTUm)

Jech, M., Lenauer, C., Novotny-Farkas, F., Feitzinger, T., & Franek, F. (2010). Advances in wear measurement - piston rings in component test and engine envirement. In Solving Friction and Wear Problems. 17th International Colloquium Tribology, Ostfildern, Deutschland, EU. TAE. http://hdl.handle.net/20.500.12708/71974 ( reposiTUm)

Peterko, P., Lenauer, C., Jech, M., & Franek, F. (2010). Influence Of The Oilfilter On The Wear Measurement Using Radioactive Particles. In SYMPOSIUM 2010 - WETTBEWERBSVORSPRUNG DURCH TRIBOLOGISCHE INNOVATIONEN - Beherrschung von Reibung und VerschleiB durch Oberflachen- und Schmierstofftechnik (pp. 265–268). österreichische Tribologische Gesellschaft. http://hdl.handle.net/20.500.12708/71987 ( reposiTUm)

Stadler, A., Brenner, J., Hofer, M., Wosik, J., & Franek, F. (2009). Experimental Investigation Of The Influence Of Oil Change In A Wet Clutch System. In Symposium 2009 - Lebensdauer und Energieeffizienz: Herausforderungen im Maschninenbau und in der Schmierungstechnik (pp. 27–38). ÖTG. http://hdl.handle.net/20.500.12708/71253 ( reposiTUm)

Schneider, A., Brenner, J., Tomastik, C., Dörr, N., & Franek, F. (2009). Capacity Of Selected Ionic Liquids As Alternative Ep-Aw Additive. In ECOTRIB ’09 - 2nd European Conference on Tribology (pp. 923–928). University of Pisa. http://hdl.handle.net/20.500.12708/71254 ( reposiTUm)

Schneider, A., Steinmüller-Nethl, D., & Franek, F. (2009). Tribological Properties Of Nanocrystalline Diamond Surfaces. In 3rd Vienna International Conference on NANO-TECHNOLOGY - VIENNANO´09 (pp. 439–444). Österreichische Tribologische Gesellschaft. http://hdl.handle.net/20.500.12708/71252 ( reposiTUm)

Franek, F. (2009). TRIBOLOGY ACTIVITIES IN AUSTRlA. In ECOTRIB ’09 - 2nd European Conference on Tribology (pp. 1065–1070). University of Pisa. http://hdl.handle.net/20.500.12708/71258 ( reposiTUm)

Eder, S., Vorlaufer, G., Franek, F., & Betz, G. (2009). Molecular Dynamics Simulations of the Tribological Performance of Model Lubricant Additives. In World Tribology Kongress 2009 - Proceedings (p. 623). Japanese Society of Tribologists. http://hdl.handle.net/20.500.12708/71193 ( reposiTUm)

Marian, V. G., Scheichl, B., Tungkunagorn, N., Vorlaufer, G., & Franek, F. (2009). Evaluation of Mass Conservative Models for the Tribological Analysis of Porous Bearings. In 11th International Conference on Tribology - SERBIATRIB `09. PROCEEDINGS (pp. 220–223). Serbian Tribology Society and Faculty of Mechanical Engineering. http://hdl.handle.net/20.500.12708/65900 ( reposiTUm)

Jech, M., Wopelka, T., & Franek, F. (2009). Nvct - Wear Measurement At Nanometer Scale. In 3rd Vienna International Conference on NANO-TECHNOLOGY - VIENNANO´09 (pp. 115–119). Österreichische Tribologische Gesellschaft. http://hdl.handle.net/20.500.12708/71249 ( reposiTUm)

Corniani, E., Vilhena, L. M., Marian, V. G., Jech, M., Rodriguez Ripoll, M., Sedlacek, M., Ditroi, F., & Franek, F. (2009). Experimental wear volume analysis on Al-Si-Cu laser textured cylinder liners using thin layer activation technique. In World Tribology Kongress 2009 - Proceedings (p. 131). Japanese Society of Tribologists. http://hdl.handle.net/20.500.12708/71282 ( reposiTUm)

Tomastik, C., Jech, M., Wopelka, T., & Franek, F. (2009). Comparative Nanoindentation Analysis Of Cylinder Liners From Tribological Model Experiments And From Internal Combustion Engines. In 3rd Vienna International Conference on NANO-TECHNOLOGY - VIENNANO´09 (pp. 429–432). Österreichische Tribologische Gesellschaft. http://hdl.handle.net/20.500.12708/71251 ( reposiTUm)

Jisa, R., Ristic, A., Brenner, J., Lebersorger, T., Ilo, S., Neumayer, H., & Franek, F. (2009). Effectiveness Of Lubricant Additives For Copper-Alloy-Steel Sliding Contacts. In ECOTRIB ’09 - 2nd European Conference on Tribology (pp. 941–946). University of Pisa. http://hdl.handle.net/20.500.12708/71255 ( reposiTUm)

Franek, F., Badisch, E., & Kirchgaßner, M. (2009). Advanced Methods for Characterisation of Abrasion/Erosion Resistance of Wear Protection Materials. In 11th International Conference on Tribology - Serbiatrib `09 - Proceedings (pp. 27–36). Serbian Tribology Society and Faculty of Mechanical Engineering. http://hdl.handle.net/20.500.12708/71268 ( reposiTUm)

Roy, M., Pauschitz, A., Polak, R., & Franek, F. (2008). High temperature wear of thermal sprayed CR3C2-25(Ni-20Cr) coating against Fe based and Ni based mating surfaces. In Proceedings (p. 8). TAE. http://hdl.handle.net/20.500.12708/70718 ( reposiTUm)

Franek, F. (2008). Bionik.Aufgaben in der Tribologie. In BIONIK - BiologInnen und TechnikerInnen schauen sich über die Schulter. BIONIK - BiologInnen und TechnikerInnen schauen sich über die Schulter, Wien, Austria. http://hdl.handle.net/20.500.12708/70716 ( reposiTUm)

Zehethofer, G., Franek, F., & Störi, H. (2008). Wear mechanism analysis of a doctor blade sliding against a coated cylinder. In Proceedings (p. 127). http://hdl.handle.net/20.500.12708/70715 ( reposiTUm)

Franek, F. (2008). Bionics Aspects In Tribology - Tribo-Bionics. In Balkantrib ’08 (p. BT-PP6-1-BT-PP6-10). http://hdl.handle.net/20.500.12708/70721 ( reposiTUm)

Franek, F., Vorlaufer, G., Stadler, A., Jech, M., & Wopelka, T. (2008). Modelling And Simulation Assisted Tribometrology. In Balkantrib ’08 (p. BT-094-1-BT-094-10). http://hdl.handle.net/20.500.12708/70722 ( reposiTUm)

Franek, F., Jech, M., & Wopelka, T. (2008). Wirkung und Verschleiß von Werkstoffen bzw. Oberflächen für Zylinderlaufbuchsen im Modelltribometerversuch. In 49. Tribologie Fachtagung (pp. 37/1-37/8). http://hdl.handle.net/20.500.12708/70709 ( reposiTUm)

Wopelka, T., Jech, M., & Franek, F. (2008). Einfluss von Biodiesel auf die Schmierfähigkeit von Motoröl. In Symposium 2008 - Innovationen bei Werk- und Schmierstoffen für moderne, umweltorientierte Tribosysteme (pp. 121–129). ÖTG. http://hdl.handle.net/20.500.12708/70714 ( reposiTUm)

Jech, M., Wopelka, T., Pauschitz, A., & Franek, F. (2008). Performance of bio-based lubricants investigated at nanoscale by means of nVCT. In Proceedings (p. 7). TAE. http://hdl.handle.net/20.500.12708/70717 ( reposiTUm)

Jisa, R., Ristic, A., Franek, F., & Eisenmenger-Stittner, C. (2008). Interactions of lubricant additives with sliding surfaces based on copper alloys. In Abstracts (p. 40). http://hdl.handle.net/20.500.12708/70713 ( reposiTUm)

Franek, F., Vorlaufer, G., Edelbauer, W., & Bukovnik, S. (2007). SIMULATION OF TRIBOSYSTEMS AND TRIBOMETROLOGY. In SERBIATRIB ’07 (pp. 15–24). http://hdl.handle.net/20.500.12708/70106 ( reposiTUm)

Grafl, A., & Franek, F. (2007). ALTERUNGSVERHALTEN VON SCHMIERÖLEN. In RELIABILITY ENGINEERING - Simulation und Monitoring von verschleißgefährdeten Systemen (pp. 163–174). http://hdl.handle.net/20.500.12708/70103 ( reposiTUm)

Vorlaufer, G., Stadler, A., Pauschitz, A., & Franek, F. (2007). Simulationsgestützte Auswertung von tribometrischen Untersuchungen zur Reibzahlcharakterisierung. In RELIABILITY ENGINEERING - Simulation und Monitoring von verschleißgefährdeten Systemen (pp. 35–44). http://hdl.handle.net/20.500.12708/70030 ( reposiTUm)

Dörr, N., Jakoby, B., Riesch, C., Pauschitz, A., & Franek, F. (2007). Microemulsions as lubricating fluids - challenges and possible applications. In Proceedings of the Viennano ’07 (pp. 337–339). http://hdl.handle.net/20.500.12708/70822 ( reposiTUm)

Franek, F. (2007). Tribology Activities in Austria. In ECOTRIB ’07 (pp. 1175–1178). Slovenian Society for Tribology. http://hdl.handle.net/20.500.12708/70020 ( reposiTUm)

Vorlaufer, G., Stadler, A., Pauschitz, A., & Franek, F. (2007). Bestimmung der Reibzahlcharakteristik von Friktionselementen aus Ruckgleit-Experimenten. In Reibung, Schmierung und Verschleiß - Forschung und praktische Anwendungen - Band 1. 48. Tribologie-Fachtagung - GfT, Göttingen, Deutschland, EU. Gesellschaft für Tribologie e.V. http://hdl.handle.net/20.500.12708/70022 ( reposiTUm)

Franek, F., Vorlaufer, G., & Zehethofer, G. (2007). Aufgaben der Simulation in der Tribotechnik. In RELIABILITY ENGINEERING - Simulation und Monitoring von verschleißgefährdeten Systemen (pp. 7–25). http://hdl.handle.net/20.500.12708/70029 ( reposiTUm)

Jech, M., Franek, F., Wopelka, T., Dörr, N., & Pauschitz, A. (2007). Nachweis des Alterungseinflusses auf die Schmierfähigkeit von Motorenölen mit hochauflösender Verschleißmengenmessung (nVCT-Methode). In Reibung, Schmierung und Verschleiß - Forschung und praktische Anwendungen - Band 2. 48. Tribologie-Fachtagung - GfT, Göttingen, Deutschland, EU. Gesellschaft für Tribologie e.V. http://hdl.handle.net/20.500.12708/70023 ( reposiTUm)

Jech, M., Wopelka, T., & Franek, F. (2007). Lubricant peformance characterisation using nanoscale wear volume analysis by coherence technology. In ECOTRIB ’07 (pp. 319–327). Slovenian Society for Tribology. http://hdl.handle.net/20.500.12708/70104 ( reposiTUm)

Jech, M., Wopelka, T., Eder, J., & Franek, F. (2007). Progress and resolution of modern wear measurement systems. In RELIABILITY ENGINEERING - Simulation und Monitoring von verschleißgefährdeten Systemen (pp. 81–92). http://hdl.handle.net/20.500.12708/70031 ( reposiTUm)

Badisch, E., Polak, R., Kirchgaßner, M., & Franek, F. (2007). Multiphase materials: Influence of microstructure and interface properties on wear behaviour. In ECOTRIB ’07 (pp. 585–596). Slovenian Society for Tribology. http://hdl.handle.net/20.500.12708/70021 ( reposiTUm)

Franek, F. (2006). Tribologie. In Professional MBA Industrial Engineering - Modul 9 - Tribologie (p. 80). http://hdl.handle.net/20.500.12708/69533 ( reposiTUm)

Dörr, N., Schneider, A., Sebestyen, T., Franek, F., Merstallinger, A., & Pahl, W. (2006). Ionic liquids in porous metal bearings (Feasibilty study). In Zukunftstrends tribologischer Komponenten in der Antriebstechnik (pp. 65–76). http://hdl.handle.net/20.500.12708/69538 ( reposiTUm)

Franek, F., & Pauschitz, A. (2006). Metallische und polymere Gleitelemente am Beispiel ausgewählter tribologischer Untersuchungen. In Selbstschmierende und wartungsfreie Gleitlager (p. 25). TAE. http://hdl.handle.net/20.500.12708/69534 ( reposiTUm)

Franek, F., Pauschitz, A., Dörr, N., & Polt, G. (2006). Applied Research Activities at the Austrian Center of Competence for Tribology. In 15th international colloquium tribology - Automotive and Industrial Lubrication - Book of Synopses 2006. 15th international colloquium tribology “Automotive and Industrial Lubrication,” Ostfildern, Germany, EU. TAE. http://hdl.handle.net/20.500.12708/69530 ( reposiTUm)

Franek, F., Dörr, N., & Felkel, J. (2006). Analytical Methods for Characterisation of Novel Fuels and Lubricants - a Critical Review. In Tribology of Alternative Fuels and Ecolubricants (pp. 23–24). ÖTG. http://hdl.handle.net/20.500.12708/69541 ( reposiTUm)

Gebeshuber, I. C., Pauschitz, A., & Franek, F. (2006). Biotribological model systems for emerging nanometer scale technologies. In IEEE Conf. on Emerging Technologies - Nanoelectronics (p. 5). http://hdl.handle.net/20.500.12708/44210 ( reposiTUm)

Dörr, N., Ecker, A., Lebersorger, T., Pauschitz, A., & Franek, F. (2006). Tribological Behaviour of Selected Ionic Liquids. In 15th international colloquium tribology - Automotive and Industrial Lubrication - Book of Synopses 2006. 15th international colloquium tribology “Automotive and Industrial Lubrication,” Ostfildern, Germany, EU. TAE. http://hdl.handle.net/20.500.12708/69531 ( reposiTUm)

Franek, F., Neuhaus, A. R., Reichart, M., & Hammerschmid, A. (2006). Mechatronical systems and experimental methods for investigations on tribology of electrical contacts. In 2nd International Conference Mechatronic Systems and Materials - Proceedings. 2nd International Conference Mechatronic Systems and Materials - MSM2006, Cracow, Poland, EU. http://hdl.handle.net/20.500.12708/69535 ( reposiTUm)

Neuhaus, A. R., Franek, F., Pauschitz, A., & Schrank, C. (2006). The influence of load and contact material on the tangential separation force of low current switching contacts. In Zukunftstrends tribologischer Komponenten in der Antriebstechnik (pp. 151–162). ÖTG. http://hdl.handle.net/20.500.12708/69540 ( reposiTUm)

Jech, M., Lebersorger, T., & Franek, F. (2006). Einfluss der Neigung der tribologischen Kontaktfläche auf die Schmierstoffverfügbarkeit bei SRV-Tests. In 15th international colloquium tribology - Automotive and Industrial Lubrication - Book of Synopses 2006. 15th international colloquium tribology “Automotive and Industrial Lubrication,” Ostfildern, Germany, EU. TAE. http://hdl.handle.net/20.500.12708/69532 ( reposiTUm)

Jisa, R., Eisenmenger-Stittner, C., Monetti, C., & Franek, F. (2006). Untersuchungen zum Verschleiß und Schmierungsprozess von selbstschmierenden Gleitelementen. In Zukunftstrends tribologischer Komponenten in der Antriebstechnik (pp. 79–88). ÖTG. http://hdl.handle.net/20.500.12708/69539 ( reposiTUm)

Franek, F., & Pauschitz, A. (2005). F+E Dienstleistungen der AC²T research GmbH. In CD-ROM Vorträge Kooperation Nano 05 (p. 19). http://hdl.handle.net/20.500.12708/68971 ( reposiTUm)

Gebeshuber, I. C., Stachelberger, H., Drack, M., & Franek, F. (2005). Biotribology at the Micro- and Nanoscale as Exemplified by Diatoms. In 1st Vienna International Conference on Micro- and Nano-Technology - Proceedings (pp. 135–140). Österreichische Tribologische Gesellschaft. http://hdl.handle.net/20.500.12708/68795 ( reposiTUm)

Dörr, N., Sebestyen, T., Franek, F., Merstallinger, A., & Pahl, W. (2005). Alternative Lubricating Fluids for Porous Metal Bearings. In Tribosysteme in der Fahrzeugtechnik (pp. 149–156). Österreichische Tribologiscge Gesellschaft. http://hdl.handle.net/20.500.12708/68811 ( reposiTUm)

Lugbauer, M., Kröll, A., Badisch, E., & Franek, F. (2005). Anwendung und Verschleissverhalten Hartstoffverstärkter Schichten in Hochleistungs-Agrarmaschinen. In Tribosysteme in der Fahrzeugtechnik (pp. 179–188). Österreichische Tribiologische Gesellschaft. http://hdl.handle.net/20.500.12708/68812 ( reposiTUm)

Gebeshuber, I. C., Drack, M., Aumayr, F., Winter, H., & Franek, F. (2010). Scanning Probe Microscopy: From Living Cells to the Subatomic Range. In Biosystems Investigated by Scanning Probe Microscopy (pp. 359–385). Springer: New York. http://hdl.handle.net/20.500.12708/27027 ( reposiTUm)

Franek, F., & Pauschitz, A. (2008). Metallische und Polymere Gleitelemente am Beispiel ausgewählter Tribologischer Untersuchungen. In Vortragsunterlagen zum TAE-Lehrgang 32507.00.003 “Selbstschmierende und wartungsfreie Gleitlager.” TAE - Technische Akademie Esslingen. http://hdl.handle.net/20.500.12708/26313 ( reposiTUm)

Gebeshuber, I. C., Drack, M., Aumayr, F., Winter, H., & Franek, F. (2006). Scanning Probe Microscopy: From living cells to the subatomic range. In B. Bhushan (Ed.), Applied Scanning Probe Methods III: Characterization (NanoScience and Technology) (pp. 27–53). Springer-Verlag. http://hdl.handle.net/20.500.12708/25239 ( reposiTUm)

Franek, F., & Pauschitz, A. (Eds.). (2009). Lebensdauer und Energieeffizienz - Herausforderungen im Maschninenbau und in der Schmierungstechnik. Österreichische Tribologische Gesellschaft. http://hdl.handle.net/20.500.12708/23036 ( reposiTUm)

Franek, F., & Pauschitz, A. (Eds.). (2008). Innovationen Bei Werk- und Schmierstoffen für moderne, umweltorientierte Tribosysteme. ÖTG-Symposium 2008. http://hdl.handle.net/20.500.12708/22871 ( reposiTUm)

Franek, F., & Pauschitz, A. (Eds.). (2007). RELIABILITY ENGINEERING - Simulation und Monitoring von verschleißgefährdeten Systemen. Österreichische Tribologische Gesellschaft. http://hdl.handle.net/20.500.12708/22131 ( reposiTUm)

Franek, F., & Pauschitz, A. (Eds.). (2006). Zukunftstrends Tribologischer Komponenten in der Antriebstechnik. Österreichische Tribologische Gesellschaft. http://hdl.handle.net/20.500.12708/22116 ( reposiTUm)

Kajdas, C., & Franek, F. (Eds.). (2006). Tribology of Alternative Fuels and Ecolubricants. Österreichische Tribologische Gesellschaft. http://hdl.handle.net/20.500.12708/22117 ( reposiTUm)

Franek, F., & Pauschitz, A. (Eds.). (2005). Tribosysteme in der Fahrzeugtechnik. Österreichische Tribologische Gesellschaft. http://hdl.handle.net/20.500.12708/22101 ( reposiTUm)

Franek, F., & Pauschitz, A. (Eds.). (2014). SYMPOSIUM 2014 - Tribologie in Industrie und Forschung / Werkstoffe, Konstruktion und Technologie. Österreichische Tribologische Gesellschaft. http://hdl.handle.net/20.500.12708/23895 ( reposiTUm)

Franek, F., & Pauschitz, A. (Eds.). (2013). SYMPOSIUM 2013 - Automotive Tribology. Österreichische Tribologische Gesellschaft. http://hdl.handle.net/20.500.12708/23793 ( reposiTUm)

Pauschitz, A., & Franek, F. (Eds.). (2012). SYMPOSIUM 2012 - Tribologie und Mobilität. Österreichische Tribologische Gesellschaft. http://hdl.handle.net/20.500.12708/23642 ( reposiTUm)

Franek, F., Bartz, W., Pauschitz, A., Vizintin, J., Ciulli, E., & Crockett, R. (Eds.). (2011). 3rd European Conference on Tribology + 4th Vienna International Conference on Nano-Technology - Band I+II. Österreichische Tribologische Gesellschaft. http://hdl.handle.net/20.500.12708/23436 ( reposiTUm)

Franek, F., & Pauschitz, A. (Eds.). (2011). SYMPOSIUM 2011 - TRIBOLOGIE IN INDUSTRIE UND FORSCHUNG - Werkstoff- u. Energieeffizienz - Herausforderung und Lösungsansätze. Österreichische Tribologische Gesellschaft. http://hdl.handle.net/20.500.12708/23435 ( reposiTUm)

Franek, F., & Pauschitz, A. (Eds.). (2010). SYMPOSIUM 2010 - WETTBEWERBSVORSPRUNG DURCH TRIBOLOGISCHE INNOVATIONEN - Beherrschung von Reibung und VerschleiB durch Oberflachen- und Schmierstofftechnik. Österreichische Tribologische Gesellschaft. http://hdl.handle.net/20.500.12708/23256 ( reposiTUm)

Ciulli, E., Piccigallo, B., Bassani, R., Franek, F., Vizintin, J., & Crockett, R. (Eds.). (2009). EC0TRIB 2009 - Procecdings of the European Conference on Tribology 2009. University of Pisa, Engineering Faculty. http://hdl.handle.net/20.500.12708/23037 ( reposiTUm)

Bartz, W., & Franek, F. (Eds.). (2009). 3rd Vienna International Conference on Micro- and Nano-Technology. Österreichische Tribologische Gesellschaft. http://hdl.handle.net/20.500.12708/23035 ( reposiTUm)

Vizintin, J., Podgornik, B., Holmberg, K., Ciulli, E., & Franek, F. (Eds.). (2007). EC0TRIB 2007 - Procecdings of the European Conference on Tribology and Final conference on COST 532 action. Slovenian Society for Tribology. http://hdl.handle.net/20.500.12708/22133 ( reposiTUm)

Bartz, W., & Franek, F. (Eds.). (2007). 2nd Vienna International Conference on Micro- and Nano-Technology. Österreichische Tribologische Gesellschaft. http://hdl.handle.net/20.500.12708/22132 ( reposiTUm)

Bartz, W., & Franek, F. (Eds.). (2005). 1st Vienna International Conference on Micro- and Nano-Technology - CD-ROM. Österreichische Tribologische Gesellschaft. http://hdl.handle.net/20.500.12708/22102 ( reposiTUm)

Jakab, B., Franek, F., Rodríguez Ripoll, M., & Scheichl, B. (2012). Reibleistungsminimierung bei optimaler Reinigungsleistung. ZUKUNFT.FORUM PAPIER - Die Österreichische Papierfachtagung / FUTURE.FORUM PAPER - The Austrian Paper Conference, Messe Congress, Graz, Austria. http://hdl.handle.net/20.500.12708/93342 ( reposiTUm)

Dörr, N., & Franek, F. (2012). Systemische Schienenkopf-Konditionierung durch alternative Konditioniermittel. FFG - Präsentation, Wien, Austria. http://hdl.handle.net/20.500.12708/90086 ( reposiTUm)

Franek, F. (2012). Expert Day “Material Science.” ECO-plus Präsentation, Wiener Neustadt, Austria. http://hdl.handle.net/20.500.12708/90087 ( reposiTUm)

Lenauer, C., Besser, C., Steinschütz, K., Wopelka, T., Jech, M., Novotny-Farkas, F., & Franek, F. (2011). Nanoscopic Wear Tests Using Engine Oil Aged With Ethanol Combustion Products. 3rd European Conference on Tribology, Wien, Austria. http://hdl.handle.net/20.500.12708/93289 ( reposiTUm)

Franek, F., & Vorlaufer, G. (2010). Berechnung, Simulation und Messung von Reibung und Verschleiß an Oberflächen. 4. Tag der Industrie am Technopol Wiener Neustadt “Oberflächen bei Produkten und in Produktionsprozessen,” Wiener Neustadt, NÖ, Austria. http://hdl.handle.net/20.500.12708/89443 ( reposiTUm)

Franek, F. (2010). Tribologie - im Alltag und in der Forschung. Aktion “Science goes School” der NÖ Bildungsgesellschaft m.b.H., Bundesgymnasium und Bundesrealgymnasium Krems, NÖ, Austria. http://hdl.handle.net/20.500.12708/89441 ( reposiTUm)

Franek, F. (2010). Tribologie - im Alltag und in der Forschung. Aktion “Science goes School” der NÖ Bildungsgesellschaft m.b.H., Bundesgymnasium und Bundesrealgymnasium Krems, NÖ, Austria. http://hdl.handle.net/20.500.12708/89442 ( reposiTUm)

Vernes, A., Vorlaufer, G., Ilincic, S., Eder, J., & Franek, F. (2010). Ab initio atomic-scale friction of graphene. Institut d´Etudes Scientifiques de Cargèse, Cargèse, F, EU. http://hdl.handle.net/20.500.12708/89433 ( reposiTUm)

Franek, F., & Pauschitz, A. (2010). Excellence in Tribology. Verein zur Förderung der Fachhochschule St. Pölten, St. Pölten, Austria. http://hdl.handle.net/20.500.12708/89432 ( reposiTUm)

Schneider, A., Brenner, J., Steinmüller-Nethl, D., Roy, M., & Franek, F. (2010). Tribological properties of lubricated nanocrystalline diamond surfaces for various loads and geometries. Carbon Based Coatings, Leoben, Austria. http://hdl.handle.net/20.500.12708/89435 ( reposiTUm)

Franek, F. (2010). Grundlagen der Biomechanik, Testmethoden in der Orthopädie, Testgeräte, Biomechanik in der Implantatentwicklung. Universitätslehrgang “Advanced Orthopedic Surgery - aktuelle Konzepte der Orthopädischen Chirurgie (MSc),” Krems, Austria. http://hdl.handle.net/20.500.12708/89436 ( reposiTUm)

Franek, F. (2010). Zero Friction? - Reibung minimieren, Energieeinsatz senken - Potenziale der “Green Tribology.” TechnoLog 2010, Wels, Austria. http://hdl.handle.net/20.500.12708/89434 ( reposiTUm)

Vernes, A., Vorlaufer, G., & Franek, F. (2010). Ab initio structural (super)lubricity of graphene. yk - 2010, Berlin, D, EU. http://hdl.handle.net/20.500.12708/89438 ( reposiTUm)

Franek, F. (2010). “Research and Industry.” “Industry Day”, RTN MINILUBES - Mechanisms of interactions in nano-scale of novel ionic lubricants with functional surfaces, Wien, Austria. http://hdl.handle.net/20.500.12708/89437 ( reposiTUm)

Franek, F., Badisch, E., & Peuker, C. (2010). Contribution of tribology to industrial processes. Tagung Manumec 2010 “Clean & Intelligent Manufacturing and New Develoments in Mechatronics” (Cooperation Forum - 25 Jahre EUREKA), Linz, Austria. http://hdl.handle.net/20.500.12708/89439 ( reposiTUm)

Franek, F., Badisch, E., & Pauschitz, A. (2010). Verschleißschutzschichten - spezifische Funktionalität und Charakterisierung. Round Table “Verschleißschutzbeschichtungen,” Purgstall, NÖ, Austria. http://hdl.handle.net/20.500.12708/89440 ( reposiTUm)

Franek, F. (2007). Werkstoffe und Verschleißtechnik. Alpbacher Technologiegespräche 2007, Alpbach, Tirol, Austria. http://hdl.handle.net/20.500.12708/88775 ( reposiTUm)

Franek, F., Vorlaufer, G., Edelbauer, W., & Bukovnik, S. (2007). Simulation Tasks in Tribology. AST User Meeting 2007 / AVL - Advanced Simulation Technologies / International User Meeting 2007, Graz, Austria. http://hdl.handle.net/20.500.12708/88776 ( reposiTUm)

Zehethofer, G., Franek, F., & Polak, R. (2005). Beschreibung des Schaber/Walze Kontaktes mit Hilfe der Tribosystem-Analyse. Österreichische Papierfachtagung, Graz, Österreich, Austria. http://hdl.handle.net/20.500.12708/88276 ( reposiTUm)

Takács, J., Tóth, L., Franek, F., Pauschitz, A., & Sebestyen, T. (2003). Friction and Wear Measurments of  Laser Sintered and Coated Parts. 14th International Conference on Wear of Materials, Amsterdam - NL, Austria. http://hdl.handle.net/20.500.12708/88080 ( reposiTUm)

Franek, F., & Pauschitz, A. (2003). “Austrian Center of Competence for Tribology - an Initiative to Boost Industrial R&D in Tribology.” 15th ELGI Annual General Meeting, Wien, Austria. http://hdl.handle.net/20.500.12708/88116 ( reposiTUm)

Pauschitz, A., & Franek, F. (1999). Tribologische Anforderungen an Schichtsysteme. OeGO Früjahrsveranstaltung, Baden, Austria. http://hdl.handle.net/20.500.12708/87480 ( reposiTUm)

Franek, F., & Pauschitz, A. (1998). Tribomechanische Aspekte bei Hart/Hart-Paarungen der Hüftendoprothetik. Symposium “Die Metall/Metall-Kombination,” Nizza, Frankreich, Austria. http://hdl.handle.net/20.500.12708/87479 ( reposiTUm)

Franek, F., & Pauschitz, A. (1997). Schmierwirksamkeit toxikologisch unbedenklicher Schmierstoffe in der Medizintechnik. TAE-Lehrgang "Tribologie und Schmierungstechnik in der Nahrungsmittel-, Getränke- und Genussmit, Ostfildern, D, Austria. http://hdl.handle.net/20.500.12708/87475 ( reposiTUm)

Franek, F. (1997). Metallurgische und tribologische Aspekte der Metall-Metall-Paarung. Symposium "Qualitätssicherung i. d. Hüftendoprothetik - Keramik-Keramik vs. Metall-Metall Gleit, Bad Oynhausen, Austria. http://hdl.handle.net/20.500.12708/87478 ( reposiTUm)

Franek, F. (1997). Combinación Metal/Metal Sikomet Conceptos tribológicos y metalúrgicos. The Metal/Metal Pearing Sikomet Metalurgic and Tribologic Basics.14 years of experience in Spain, Pamplona, Spanien, Austria. http://hdl.handle.net/20.500.12708/87476 ( reposiTUm)

Franek, F. (1997). Tribologische Erkenntnisse der Hüftgelenksendoprothetik bei Hart/Hart-Paarungen. II. Symposium "Die Metall/Metall-Kombination als Artikulation bei der zementfreien Hüftendoprot, Wien, Austria. http://hdl.handle.net/20.500.12708/87477 ( reposiTUm)

Pauschitz, A., & Franek, F. (1997). Tribotechnische Betrachtung zur Endoprothetik des Hüftgelenkes. 2. Seminar Muskelkräfte und Bewegung, Wien, Austria. http://hdl.handle.net/20.500.12708/87748 ( reposiTUm)

Franek, F., Pauschitz, A., Gál, P., Takács, J., & Tóth, L. (1996). Beurteilung tribologischer Eigenschaften von keramischen Schichten bei Hochtemperatur mit dem RRV-Prüfstand. Tribologie Kolloquium 96, Technische Universität Budapest, H, Austria. http://hdl.handle.net/20.500.12708/87474 ( reposiTUm)

Franek, F. (1996). Die Metall/Metall-Paarung - metallurgische Grundlagen. Symposium “Das Zweymüller-System - 15 Jahre Erfahrung,” Göttingen, Austria. http://hdl.handle.net/20.500.12708/87473 ( reposiTUm)