Koch, T., & Seidler, S. (2012). Applications of instrumented indentation testing for the characterization of polypropylene materials. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 226(2), 385–393. https://doi.org/10.1177/0954406211425760 ( reposiTUm)

Sajjad, M., Feichtenschlager, B., Pabisch, S., Svehla, J., Koch, T., Seidler, S., Peterlik, H., & Kickelbick, G. (2012). Study of the effect of the concentration, size and surface chemistry of zirconia and silica nanoparticle fillers within an epoxy resin on the bulk properties of the resulting nanocomposites. Polymer International, 61(2), 274–285. http://hdl.handle.net/20.500.12708/163400 ( reposiTUm)

Koch, T., Salaberger, D., Zankel, A., Reingruber, H., Steiger-Thirsfeld, A., Voronko, Y., & Seidler, S. (2012). Methods for Characterizing the 3-D Morphology of Polymer Composites. Macromolecular Symposia, 315, 115–124. http://hdl.handle.net/20.500.12708/163642 ( reposiTUm)

Archodoulaki, V.-M., Koch, T., Rodriguez, A., & Seidler, S. (2011). Influence of different sterilization procedures on the morphological parameters and mechanical properties of ultra-high-molecular-weight polyethylene. Journal of Applied Polymer Science, 120(4), 1875–1884. http://hdl.handle.net/20.500.12708/162719 ( reposiTUm)

Lüftl, S., Balluch, B., Smetana, W., & Seidler, S. (2011). Kinetic study of the polymeric binder burnout in green low temperture co-fired ceramic tapes. Journal of Thermal Analysis and Calorimetry, 103(1), 157–162. http://hdl.handle.net/20.500.12708/162619 ( reposiTUm)

Bruno, M., Cotella, G., Miras, M., Koch, T., Seidler, S., & Barbero, C. (2010). Characterization of monolithic porous carbon prepared from resorcinol/formaldehyde gels with cationic surfactant. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 358(1–3), 13–20. http://hdl.handle.net/20.500.12708/166731 ( reposiTUm)

Markut-Kohl, R., Archodoulaki, V.-M., Seidler, S., & Skrbensky, G. (2009). PE-UHMW in hip implants: Properties of Conventional and Crosslinked Prosthetic Components. Advanced Engineering Materials, 11(10), B148–B154. https://doi.org/10.1002/adem.200900050 ( reposiTUm)

Smetana, W., Balluch, B., Stangl, G., Lüftl, S., & Seidler, S. (2009). Processing procedures for the realization of fine structured channel arrays and bridging elements by LTCC-Technology. Microelectronics Reliability, 49(6), 592–599. https://doi.org/10.1016/j.microrel.2009.02.023 ( reposiTUm)

Joseph, A., Lüftl, S., Seidler, S., Thomas, S., & Joseph, K. (2009). Nonisothermal thermophysical evaluation of polypropylene/natural rubber based TPEs: Effect of blend ratio and dynamic vulcanization. Polymer Engineering and Science, 49(7), 1332–1339. https://doi.org/10.1002/pen.21219 ( reposiTUm)

Gäbler, S., Stampfl, J., Koch, T., Seidler, S., Schüller, G., Redl, H., Juras, V., Trattnig, S., & Weidisch, R. (2009). Determination of the viscoelastic properties of hydrogels based on polyethylene glycol diacrylate (PEG-DA) and human articular cartilage. International Journal of Materials Engineering Innovation, 1(1), 3–20. http://hdl.handle.net/20.500.12708/165406 ( reposiTUm)

Koch, T., & Seidler, S. (2009). Correlations between indentation hardness and yield stress in thermoplastic polymers. Strain, 45(1), 26–33. http://hdl.handle.net/20.500.12708/165331 ( reposiTUm)

Hollinsky, C., Sandberg, S., Koch, T., & Seidler, S. (2008). Biomechanical properties of lightweight versus heavyweight meshes for laparoscopic inguinal hernia repair and their impact on recurrence rates. Surgical Endoscopy, 22(12), 2679–2685. https://doi.org/10.1007/s00464-008-9936-6 ( reposiTUm)

Lüftl, S., Archodoulaki, V.-M., Koch, T., & Seidler, S. (2008). Effects of the additive package on the thermal properties of a commercial polyoxymethylene homopolymer. Journal of Vinyl and Additive Technology, 14(1), 21–27. https://doi.org/10.1002/vnl.20141 ( reposiTUm)

Joseph, A., Koch, T., Seidler, S., Thomas, S., & Joseph, K. (2008). Crystallization behaviour and spherulite growth rate of isotactic polypropylene in isotactic polypropylene/natural rubber based thermoplastic elastomers. Journal of Applied Polymer Science, 109(3), 1714–1721. https://doi.org/10.1002/app.27815 ( reposiTUm)

Kogler, F. R., Koch, T., Peterlik, H., Seidler, S., & Schubert, U. (2007). Mechanical, thermomechanical, and thermal properties of polystyrene crosslinked with a multifunctional zirconium oxo cluster. Journal of Polymer Science Part B: Polymer Physics, 45(16), 2215–2231. https://doi.org/10.1002/polb.21224 ( reposiTUm)

Koch, T., Kogler, F. R., Schubert, U., & Seidler, S. (2007). Mechanical Properties of Organic-Inorganic Hybrid Materials Determined by Indentation Techniques. Monatshefte Für Chemie - Chemical Monthly, 138(4), 293–299. https://doi.org/10.1007/s00706-007-0612-7 ( reposiTUm)

Archodoulaki, V.-M., Lüftl, S., & Seidler, S. (2007). Stabiliser consumption of polyoxymethylene investigated by means of the pressure oxidative induction time method. Polymer Testing, 27(2), 234–242. https://doi.org/10.1016/j.polymertesting.2007.11.001 ( reposiTUm)

Koch, T., Seidler, S., Halwax, E., & Bernstorff, S. (2007). Microhardness of quenched and annealed isotactic polypropylene. Journal of Materials Science, 42(14), 5318–5326. https://doi.org/10.1007/s10853-006-0960-4 ( reposiTUm)

Archodoulaki, V.-M., Lüftl, S., & Seidler, S. (2007). Degradation Behavior of Polyoxymethylene: Influence of Different Stabilizer Packages. Journal of Applied Polymer Science, 105(6), 3679–3688. https://doi.org/10.1002/app.26524 ( reposiTUm)

Archodoulaki, V.-M., Lüftl, S., Koch, T., & Seidler, S. (2007). Property changes in polyoxymethylene (POM) resulting from processing, ageing and recycling. Polymer Degradation and Stability, 92(12), 2181–2189. https://doi.org/10.1016/j.polymdegradstab.2007.02.024 ( reposiTUm)

Lüftl, S., Archodoulaki, V.-M., Glantschnig, M., & Seidler, S. (2007). Influence of coloration on initial material properties and on thermooxidative ageing of a polyoxymethylene copolymer. Journal of Materials Science, 42(4), 1351–1359. https://doi.org/10.1007/s10853-006-1217-y ( reposiTUm)

Archodoulaki, V.-M., Lüftl, S., & Seidler, S. (2006). Effects of Coloration on the Physical and Mechanical Properties and on the Thermal Stability of Polyoxymethylene. Advances in Polymer Technology, 25(1), 63–72. http://hdl.handle.net/20.500.12708/174110 ( reposiTUm)

Kotter, I., Grellmann, W., Koch, T., & Seidler, S. (2006). Morphology-Toughness Correlation of Polypropylene/Ethylene-Propylene Rubber Blends. Journal of Applied Polymer Science, 100, 3364–3371. http://hdl.handle.net/20.500.12708/174158 ( reposiTUm)

Archodoulaki, V.-M., Lüftl, S., & Seidler, S. (2006). Oxidation induction time studies on the thermal degradation behaviour of polyoxymethylene. Polymer Testing, 25, 83–90. http://hdl.handle.net/20.500.12708/174157 ( reposiTUm)

Lüftl, S., Archodoulaki, V.-M., & Seidler, S. (2006). Thermal-oxidative induced degradation behaviour of polyoxymethylene (POM) copolymer detected by TGA/MS*. Polymer Degradation and Stability, 91, 464–471. http://hdl.handle.net/20.500.12708/174156 ( reposiTUm)

Lach, R., Seidler, S., & Grellmann, W. (2005). Resistance against the Intrinsic Rate of Fracture Mechanics Parameters for Polymeric Materials under Moderate Impact Loading. Mechanics of Time-Dependent Materials, 9(2–3), 103–119. http://hdl.handle.net/20.500.12708/174074 ( reposiTUm)

Fritscher, C., Hüsing, N., Bernstorff, S., Brandhuber, D., Koch, T., Seidler, S., & Lichtenegger, H. C. (2005). In-situ SAXS study on cationic and non-ionic surfactant liquid crystals using synchrotron radiation. Journal of Synchrotron Radiation, 12, 717–720. http://hdl.handle.net/20.500.12708/172948 ( reposiTUm)

Lüftl, S., Archodoulaki, V.-M., Koch, T., & Seidler, S. (2012). Correlation between molar mass and thermal properties of polyoxymethylene (POM) homopolymers. In Abstracts (p. 113). http://hdl.handle.net/20.500.12708/66712 ( reposiTUm)

Salaberger, D., Koch, T., Voronko, Y., Seidler, S., & Kastner, J. (2012). Comparison of particle size distributions derived from 2D and 3D analysis for particle filled polymers. In Book of Abstracts (p. 95). http://hdl.handle.net/20.500.12708/66710 ( reposiTUm)

Markut-Kohl, R., Mosbeck, M., Archodoulaki, V.-M., & Seidler, S. (2011). Charakterisierung des mechanischen Verhaltens von Hüftpfannen aus PE-UHMW. In 13. Problemseminar Deformation und Bruchverhalten von Kunststoffen (p. 6). http://hdl.handle.net/20.500.12708/66325 ( reposiTUm)

Sajjad, M., Seidler, S., Feichtenschlager, B., Pabisch, S., Koch, T., Peterlik, H., & Kickelbick, G. (2011). Thermo-mechanical properties of PMMA nanocomposites using functionalized silica nanoparticles. In 13. Problemseminar Deformation und Bruchverhalten von Kunststoffen (p. 4). http://hdl.handle.net/20.500.12708/66423 ( reposiTUm)

Koch, T., Zankel, A., Reingruber, H., Salaberger, D., Steiger-Thirsfeld, A., Matsko, N., & Seidler, S. (2011). Methods for characterizing the 3D morphology of polymer composites. In Book of Abstracs (p. 115). Nepal Polymer Institute. http://hdl.handle.net/20.500.12708/66428 ( reposiTUm)

Koch, T., Kogler, F. R., Potzmann, R., Schubert, U., Krivec, S., Liska, R., Lichtenegger, H. C., & Seidler, S. (2011). Charakterisierung des mechanischen Verhaltens von organisch-anorganischen Hybridwerkstoffen mittels Eindruckprüfungen. In 13. Problemseminar Deformation und Bruchverhalten von Kunststoffen (p. 5). http://hdl.handle.net/20.500.12708/66422 ( reposiTUm)

Weinwurm, G., Seidler, S., & Neunteufl, B. (2010). Energie und Umwelt in der Forschung. In ÖPG Österr. Physik. Gesellsch. (Ed.), 60th Annual Meeting Austrian Physical Society (pp. 10–11). http://hdl.handle.net/20.500.12708/77804 ( reposiTUm)

Markut-Kohl, R., Schoberleitner, C., Archodoulaki, V.-M., Seidler, S., Reinisch, G., & Kolb, A. (2010). Chemical and morphological parameters in crosslinked PE-UHMW: influence of manufacturing and in vivo use on hip implants. In ASPM2010 Austrian-Slovenian Polymer Meeting, Leoben 2010: Book of Abstracts (pp. 78–79). http://hdl.handle.net/20.500.12708/66122 ( reposiTUm)

Markut-Kohl, R., Schoberleitner, C., Archodoulaki, V.-M., Seidler, S., Reinisch, G., & Kolb, A. (2010). Crosslinked PE-UHMW in hip implants: influence of manufacturing and use on structural parameters. In 14th International Conference Polymeric Materials (p. 45). http://hdl.handle.net/20.500.12708/66126 ( reposiTUm)

Koch, T., & Seidler, S. (2010). Application of instrumented micro and nano indentation testing in the field of polymer research. In IASAME 2010 (pp. 37–38). http://hdl.handle.net/20.500.12708/66227 ( reposiTUm)

Archodoulaki, V.-M., Lüftl, S., Koch, T., Seidler, S., & Stoiber, R. (2010). Correlation between molar mass and thermal/mechanical properties of polyoxymethylene (POM) copolymers. In MoDeSt2010, Athens, Greece, Proceedings (p. 2). MoDeSt Hellenic Organizing Committee. http://hdl.handle.net/20.500.12708/66177 ( reposiTUm)

Markut-Kohl, R., Mosbeck, M., Archodoulaki, V.-M., Koch, T., & Seidler, S. (2010). Hüftpfanneneinsätze aus PE-UHMW: Morphologie und Mechanische Eigenschaften. In Tagungsband - 4. Wiener Biomaterialsymposium (p. 19). http://hdl.handle.net/20.500.12708/66200 ( reposiTUm)

Archodoulaki, V.-M., Markut-Kohl, R., Koch, T., & Seidler, S. (2010). Characterisation of the fracture behaviour and determination of micro-hardness of medical grade ultra high molecular weight polyethylene (PE-UHMW). In MoDeSt2010, Athens, Greece, Proceedings (p. 2). MoDeSt Hellenic Organizing Committee. http://hdl.handle.net/20.500.12708/66178 ( reposiTUm)

Sajjad, M., Feichtenschlager, B., Pabisch, S., Koch, T., Seidler, S., Peterlik, H., & Kickelbick, G. (2010). Effect of surface modification of silica nanoparticles on the thermomechanical properties of epoxy nanocomposites. In Book of Abstracts (p. 30). http://hdl.handle.net/20.500.12708/66228 ( reposiTUm)

Sajjad, M., Feichtenschlager, B., Pabisch, S., Koch, T., Seidler, S., Peterlik, H., & Kickelbick, G. (2010). Properties of Epoxy/SiO2 - and Epoxy/ZrO2 - Nanocomposites. In Proceedings Polymeric Materials 2010 (p. 4). http://hdl.handle.net/20.500.12708/66222 ( reposiTUm)

Sajjad, M., Feichtenschlager, B., Pabisch, S., Koch, T., Seidler, S., Peterlik, H., & Kickelbick, G. (2010). Epoxy nanocomposites with surface functionalized silica nanocomposites. In ASPM2010 Austrian-Solenian Polymer Meeting, Leoben 2010: Book of Abstracts (p. 151). http://hdl.handle.net/20.500.12708/66230 ( reposiTUm)

Koch, T., Steiger-Thirsfeld, A., Zankel, A., Reingruber, H., Salaberger, D., & Seidler, S. (2010). Morphology characterization of particle filled polymers by tomographic methods. In Proceedings Polymeric Materials 2010 (p. 4). http://hdl.handle.net/20.500.12708/66223 ( reposiTUm)

Koch, T., Steiger-Thirsfeld, A., Zankel, A., Reingruber, H., Salaberger, D., & Seidler, S. (2010). Morphology characterization of particle filled polymers by tomographic methods. In Book of Abstracts (p. 133). http://hdl.handle.net/20.500.12708/66229 ( reposiTUm)

Pabisch, S., Feichtenschlager, B., Kickelbick, G., Koch, T., Seidler, S., Peterlik, H., & Sajjad, M. (2009). Structural characterization of surface-functionalized nanoparticles and nanocomposites by SAXS. In Joint Annual Meeting of the Austrian Physical Society (p. 94 (253)). http://hdl.handle.net/20.500.12708/46610 ( reposiTUm)

Sajjad, M., Koch, T., Seidler, S., Feichtenschlager, B., Kickelbick, G., Peterlik, H., & Pabisch, S. (2009). Effects of incorporation of silica and zirconia nanoparticles on the thermal and thermomechanical properties of polymer nanocomposites. In Tagungsband 12. Problemseminar (p. 1). http://hdl.handle.net/20.500.12708/65981 ( reposiTUm)

Koch, T., Lach, R., & Seidler, S. (2009). Möglichkeiten zur Reduzierung der eingesetzten Werkstoffmenge für die EWF-Methode. In Tagungsband 12. Problemseminar (p. 6). http://hdl.handle.net/20.500.12708/65982 ( reposiTUm)

Markut-Kohl, R., Koch, T., Archodoulaki, V.-M., & Seidler, S. (2009). PE-UHMW in hip implants: The influence of crosslinking on structural parameters and micro-mechanical properties. In Cost 533 Training School - Biotribology. Basis And Trends In Medicine And Engineering And Its Societal Impact (p. 1). http://hdl.handle.net/20.500.12708/65930 ( reposiTUm)

Markut-Kohl, R., Archodoulaki, V.-M., & Seidler, S. (2009). PE-UHMW IN IMPLANTS: Influence of processing on the chemical and physical structure. In Biotribology - Bridging Engineering and Medicine (p. 16). http://hdl.handle.net/20.500.12708/65931 ( reposiTUm)

Markut-Kohl, R., Archodoulaki, V.-M., Koch, T., & Seidler, S. (2009). The effect of the consolidation process on structural parameters and micromechanical properties of PE-UHMW. In 4th International Meeting - UHMWPE for arthroplasty: from powder to debris; 4th International Meeting - UHMWPE for arthroplasty: from powder to debris, Torino, Italy, EU. http://hdl.handle.net/20.500.12708/65952 ( reposiTUm)

Markut-Kohl, R., Archodoulaki, V.-M., & Seidler, S. (2009). Eigenschaften vernetzter und konventioneller PE-UHMW Werkstoffe für die orthopädische Anwendung. In tagungsband_12_Problemseminar (p. 8). http://hdl.handle.net/20.500.12708/65932 ( reposiTUm)

Koch, T., Lach, R., & Seidler, S. (2009). About the possibilities to reduce the necessary material mass in Essential Work of Fracture of polymers. In Proceedings (p. 9). http://hdl.handle.net/20.500.12708/65935 ( reposiTUm)

Lach, R., Koch, T., Feichtenschlager, B., Kickelbick, G., Grellmann, W., & Seidler, S. (2009). Application of improved indentation fracture mechanics approaches on in-situ polymerisized organic-inorganic nanocomposites. In 12th International Conference on Fracture - Proceedings (p. 8). http://hdl.handle.net/20.500.12708/65936 ( reposiTUm)

Sajjad, M., Koch, T., Seidler, S., Feichtenschlager, B., Kickelbick, G., Peterlik, H., & Pabisch, S. (2009). Effects of incorporation of silica and zirconia nanoparticles on the thermal and thermomechanical properties of polymer nanocomposites. In EPF 09 - book of abstracts (p. 92). http://hdl.handle.net/20.500.12708/65937 ( reposiTUm)

Markut-Kohl, R., Archodoulaki, V.-M., & Seidler, S. (2009). Influence of the consolidation and crosslinking processes on the properties of orthopaedic grade PE-UHMW. In epf´09 european polymer congress (p. 112). http://hdl.handle.net/20.500.12708/65933 ( reposiTUm)

Koch, T., & Seidler, S. (2008). Influence of crystallization conditions on micro hardness and indentation modulus of PP/PE-HD blends. In Polymeric Materials 2008 (p. A09). http://hdl.handle.net/20.500.12708/65774 ( reposiTUm)

Archodoulaki, V.-M., Koch, T., Lüftl, S., & Seidler, S. (2008). Oxidationsinduktionszeit/-temperatur Versuche an Polyoxymethylen (POM) zur Untersuchung der thermooxidativen Alterung. In Polymeric Materials 2008 (p. C22). http://hdl.handle.net/20.500.12708/65777 ( reposiTUm)

Koch, T., Hollinsky, C., Sandberg, S., Hollinsky, K. H., & Seidler, S. (2008). Mechanisches Verhalten von Netzen für die Hernienchirurgie. In 3. Wiener Biomaterialsymposium, Tagungsband (p. 53). http://hdl.handle.net/20.500.12708/65825 ( reposiTUm)

Gäbler, S., Koch, T., Stampfl, J., Seidler, S., Redl, H., Trattnig, S., & Weidisch, R. (2008). Bestimmung der viskoelastischen Eigenschaften von Hydrogelen basierend auf Polyethylenglykol-Diacrylat und humanem Gelenkknorpel. In 3. Wiener Biomaterialsymposium, Tagungsband (p. 47). http://hdl.handle.net/20.500.12708/65824 ( reposiTUm)

Markut, R., Archodoulaki, V.-M., & Seidler, S. (2008). PE-UHMW in Hip Implants: Non-Crosslinked and Highly Crosslinked Prosthetic Components. In ASPM 2008 - 9th Austrian Polymer Meeting (p. 37). http://hdl.handle.net/20.500.12708/65743 ( reposiTUm)

Lach, R., Koch, T., & Seidler, S. (2008). Influence of the Geometry on the Essential Work of Fracture of Polypropylene Materials. In 17th European Conference on Fracture: Multilevel Approach to Fracture of Materials, Components and Structures (p. 7). European Structural Integrity Society. http://hdl.handle.net/20.500.12708/65760 ( reposiTUm)

Markut, R., Archodoulaki, V.-M., & Seidler, S. (2008). PE-UHMWP in hip implants: The influence of crosslinking on structural parameters and micro-mechanical properties. In Polymeric Materials 2008 (p. PI-18). http://hdl.handle.net/20.500.12708/65795 ( reposiTUm)

Koch, T., Hollinsky, C., Sandberg, S., Hollinsky, K. H., & Seidler, S. (2008). Mechanical behaviour of meshes used in hernia surgery. In ASPM 2008 - 9th Austrian Polymer Meeting (p. 64). http://hdl.handle.net/20.500.12708/65755 ( reposiTUm)

Koch, T., Kogler, F. R., Schubert, U., & Seidler, S. (2008). Mechanical and thermal properties of polystyrene crosslinked with a multifunctional zirkonium oxo cluster. In Chemical Congress 2008 (p. 84). http://hdl.handle.net/20.500.12708/65753 ( reposiTUm)

Koch, T., Lach, R., & Seidler, S. (2008). Influence of the Specimen Geometry on the Essential Work of Fracture of Polypropylene Materials. In 5th Intern. Conf. on Fracture of Polymers, Composites and Adhesives. 5th Intern. Conf. on Fracture of Polymers, Composites and Adhesives, Les Diablerets, Non-EU. European Structural Integrity Society. http://hdl.handle.net/20.500.12708/65769 ( reposiTUm)

Markut-Kohl, R., Archodoulaki, V.-M., Seidler, S., & Skrbensky, G. (2008). PE-UHMW in der Endoprothetik: Eigenschaften vernetzter und nicht vernetzter Implantatteile. In 3. Wiener Biomaterialsymposium, 19.-21.11.2008 (p. 32). http://hdl.handle.net/20.500.12708/65871 ( reposiTUm)

Markut-Kohl, R., Koch, T., Archodoulaki, V.-M., & Seidler, S. (2008). PE-UHMW in hip implants: The influence of crosslinking on structural parameters and mirco-mechanical properties. In Junior Scientist Conference 2008: Proceedings (pp. 209–210). http://hdl.handle.net/20.500.12708/65872 ( reposiTUm)

Balluch, B., Lüftl, S., Seidler, S., & Smetana, W. (2008). Binder Burnout Studies of LTCC Tapes by Means of Thermal Analyses. In Abstracts Proceedings of the XXXII International Conference of IMAPS Poland Chapter (p. 1). http://hdl.handle.net/20.500.12708/70735 ( reposiTUm)

Markut, R., Rodriguez, A., Archodoulaki, V.-M., & Seidler, S. (2007). Werkstoffcharakterisierung und Schadensanalyse von Implantaten aus PE-UHMW. In 11. Problemseminar “Deformation und Bruchverhalten von Kunststoffen” (p. 8). http://hdl.handle.net/20.500.12708/65604 ( reposiTUm)

Koch, T., & Seidler, S. (2007). Härte-Fließspannungs-Zusammenhänge in Kunststoffen. In 11. Problemseminar “Deformation und Bruchverhalten von Kunststoffen” (p. 6). http://hdl.handle.net/20.500.12708/65606 ( reposiTUm)

Pariona Lartiga, J., Koch, T., & Seidler, S. (2007). Einfluss der Prüfkörperdicke auf die mittels EWF-Methode ermittelten Kennwerte. In 11. Problemseminar “Deformation und Bruchverhalten von Kunststoffen” (p. 2). http://hdl.handle.net/20.500.12708/65608 ( reposiTUm)

Koch, T., & Seidler, S. (2007). Correlations of Indentation Hardness and Yield Stress in Polymers. In E. Gdoutos (Ed.), Experimental Analysis of Nano and Engineering Materials and Structures (p. 6). http://hdl.handle.net/20.500.12708/65638 ( reposiTUm)

Archodoulaki, V.-M., Koch, T., Lüftl, S., & Seidler, S. (2007). Auswirkungen von Verarbeitung, Alterung und Rezyklierung auf die Eigenschaften von Polyoxymethylen. In 11. Problemseminar “Deformation und Bruchverhalten von Kunststoffen” (p. 5). http://hdl.handle.net/20.500.12708/65601 ( reposiTUm)

Schubert, U., Kogler, F. R., Gao, Y., Peterlik, H., Koch, T., & Seidler, S. (2007). Inorganic-organic hybrid polymers from metal oxide clusters as nanosized building blocks. In Advancing Materials by Chemical Design (p. 122). http://hdl.handle.net/20.500.12708/65670 ( reposiTUm)

Seidler, S., Koch, T., Kogler, R., & Schubert, U. (2007). Effectiveness of Zr6 clusters as cross-link agents for polystyrene. In Proceedings - Symposium on Functional Polymer Based Materials - April 2007 (pp. 13–15). http://hdl.handle.net/20.500.12708/65705 ( reposiTUm)

Reinisch, G., Markut, R., & Seidler, S. (2007). Tribological Aspects and Nanoindentation Measurements of the “Viennese Cross-Linked Hip Retrievals.” In COST 533 biotribology - Materials for improved wear resistance of total artificial joints (pp. 13–25). Tekniker - research alliance. http://hdl.handle.net/20.500.12708/65742 ( reposiTUm)

Koch, T., Kogler, F. R., Schubert, U., & Seidler, S. (2006). Characterization of Organic-Inorganic Hybrid Materials by Indentation Techniques. In Polymerwerkstoffe 2006 (p. 29). http://hdl.handle.net/20.500.12708/45715 ( reposiTUm)

Koch, T., Kogler, F. R., Schubert, U., & Seidler, S. (2006). Mechanical Properties of Organic-Inorganic Hybrid Materials Determined by Indentation Techniques. In K. Vincze-Minya & A. Schausberger (Eds.), The Chain of Knowlegde - From Catalyst to Application. http://hdl.handle.net/20.500.12708/45714 ( reposiTUm)

Seidler, S. (2006). Macro - Micro - Nano: Scaling Problems in Polymer Characteriszation and Testing. In POLYCHAR - World Forum on Advanced Materials (p. 22). http://hdl.handle.net/20.500.12708/65386 ( reposiTUm)

Fritscher, C., Lichtenegger, H. C., Stampfl, J., Hüsing, N., Liska, R., Inführ, R., Koch, T., & Seidler, S. (2006). Hierarchisch strukturiertes Siliziumdioxid und seine mechanischen Eigenschaften. In 2. Wiener Biomaterialsymposium (p. 9). http://hdl.handle.net/20.500.12708/65512 ( reposiTUm)

Archodoulaki, V.-M., Lüftl, S., & Seidler, S. (2006). Property changes of polyoxymethylene (POM) by means of processing, ageing and recycling. In Fourth International Conference on Polymer Modification, Degradation and Stabilization - Book of Abstracts (p. 93). http://hdl.handle.net/20.500.12708/65494 ( reposiTUm)

Archodoulaki, V.-M., Lüftl, S., & Seidler, S. (2006). Effects of Processing, Ageing and Recycling on the Properties of Polyoxymethylene (POM). In 8th Austrian Polymer Meeting. The Chain of Knowledge - From Catalyst to Application (p. 48). http://hdl.handle.net/20.500.12708/65493 ( reposiTUm)

Fritscher, C., Lichtenegger, H. C., Stampfl, J., Hüsing, N., Liska, R., Inführ, R., Koch, T., & Seidler, S. (2006). 3-Dimensional Mesoporous Silica Monoliths and their Structural and Mechanical Properties. In Polymerwerkstoffe 2006 - Abstracts (p. 34). http://hdl.handle.net/20.500.12708/45536 ( reposiTUm)

Fritscher, C., Lichtenegger, H. C., Stampfl, J., Hüsing, N., Liska, R., & Seidler, S. (2006). Nonostructured silica/polymer-monoliths. In ISOSXIV 3#^{rd} European Organosilicon Days - Abstracts (p. P071). http://hdl.handle.net/20.500.12708/45539 ( reposiTUm)

Koch, T., Seidler, S., Halwax, E., & Bernstorff, S. (2005). Microhardness of quenched iPP. In 10. Problemseminar Deformations- und Bruchverhalten von Kunststoffen (p. 2). http://hdl.handle.net/20.500.12708/65286 ( reposiTUm)

Kotter, I., Grellmann, W., Koch, T., & Seidler, S. (2005). Zähigkeitscharakterisierung von EPR-modifizierten Polypropylenwerkstoffen. In 10. Problemseminar Deformations- und Bruchverhalten von Kunststoffen (p. 6). http://hdl.handle.net/20.500.12708/65285 ( reposiTUm)

Seidler, S. (2005). Thermoanalytische Messmethoden - methodische Aussagefähigkeit und industrielle Aspekte. In W. Grellmann (Ed.), Tagungsband Werkstoffprüfung 2005: Herausforderungen neuer Werkstoffe an die Forschung und Werkstoffprüfung (DVM Bericht 641) (pp. 247–256). DVM. http://hdl.handle.net/20.500.12708/65306 ( reposiTUm)

Koch, T., & Seidler, S. (2005). Korrelationen von Eindringhärte und Fließspannung in Kunststoffen. In W. Grellmann (Ed.), Tagungsband Werkstoffprüfung 2005: Herausforderungen neuer Werkstoffe an die Forschung und Werkstoffprüfung (DVM Bericht 641) (pp. 333–338). DVM. http://hdl.handle.net/20.500.12708/65305 ( reposiTUm)

Lüftl, S., Archodoulaki, V.-M., Seidler, S., & Koch, T. (2005). Effects of the additive package on the thermal properties of a commercial Polyoxymethylene (POM) homopolymer. In 10. Problemseminar Deformations- und Bruchverhalten von Kunststoffen (p. 1). http://hdl.handle.net/20.500.12708/65288 ( reposiTUm)

Lach, R., Seidler, S., & Grellmann, W. (2005). Crack Propagation Kinetics of Polymers under Moderate Impact Loading. In W. Grellmann (Ed.), 10. Problemseminar Deformations- und Bruchverhalten von Kunststoffen (p. 1). http://hdl.handle.net/20.500.12708/65287 ( reposiTUm)

Lüftl, S., Archodoulaki, V.-M., & Seidler, S. (2005). Einfluss der Stabilisierung auf die thermischen eigenschaften von Polyoxymethylen (POM). In W. Grellmann (Ed.), Tagungsband Werkstoffprüfung 2005: Herausforderungen neuer Werkstoffe an die Forschung und Werkstoffprüfung (DVM Bericht 641) (pp. 305–310). DVM. http://hdl.handle.net/20.500.12708/65307 ( reposiTUm)

Seidler, S. (2005). Morphology - Mechanicl Property Correlations in Polymer Blends in Terms of Macromechanical and Micromechanical Testing Methods. In ICBC -2005. International Conference on Advances in Polymer Blends, Composites, IPNs and Gels: Macro to Nano Scales (ICBC-2005), Mahatma Gandhi University, Kottayam (India), Non-EU. http://hdl.handle.net/20.500.12708/65284 ( reposiTUm)

Lach, R., Seidler, S., & Grellmann, W. (2005). Crack propagation kinetics of polymers at quasistatic and moderate impact loading. In 11th International Conference on Fracture (p. 6). http://hdl.handle.net/20.500.12708/65283 ( reposiTUm)

Fritscher, C., Lichtenegger, H. C., Stampfl, J., Hüsing, N., Liska, R., & Seidler, S. (2005). NANOSTRUCTURED SILICA/POLYMER-MONOLITHS. In ISOS XIV, 14th International Symposium on Organosilicon Chemistry (p. 158). http://hdl.handle.net/20.500.12708/65311 ( reposiTUm)

Lüftl, S., Archodoulaki, V.-M., Seidler, S., & Koch, T. (2005). Effects of the additive package on the thermal properties of a commercial Polyoxymethylene (POM) homopolymer. In 7th Austrian Polymer Meeting (p. 53). Institute for Chemistry and Technology of Organic Materials, Graz University of Technology. http://hdl.handle.net/20.500.12708/65302 ( reposiTUm)

Seidler, S. (2005). Materialien von gestern - Werkstoffe von heute: Trends in der Kunststoffentwicklung. In Neu gegen Alt: die richtige Anwendung traditioneller und neuer Werkstoffe. 3. Werkstoffkongress “Neu gegen Alt,” Leoben, Österreich, Austria. http://hdl.handle.net/20.500.12708/65343 ( reposiTUm)

Fritscher, C., Lichtenegger, H. C., Stampfl, J., Hüsing, N., Liska, R., Inführ, R., & Seidler, S. (2005). Templating of organic/inorganic hybrid materials. In European Materials Research Society Spring Meeting E-MRS 2005 - Scienific Programme (pp. I-28/54). http://hdl.handle.net/20.500.12708/45542 ( reposiTUm)

Koch, T., Seidler, S., Halwax, E., & Bernstoff, S. (2004). Microhardness of quenched iPP. In 11th International Conference Polymeric Materials (p. 13). Druck-Zuck. http://hdl.handle.net/20.500.12708/45107 ( reposiTUm)

Fritscher, C., Lichtenegger, H. C., Stampfl, J., Hüsing, N., Liska, R., & Seidler, S. (2004). Fabrication of Bio-inspired Silica Composites. In MRS Fall Meeting 2004 - Program & Exhibit Guide (p. 729). http://hdl.handle.net/20.500.12708/45172 ( reposiTUm)

Fritscher, C., Lichtenegger, H. C., Stampfl, J., Hüsing, N., Liska, R., & Seidler, S. (2004). Fabrication of Bio-inspired Silica Composites. In 2004 MRS Fall Meeting (p. 1). MRS. http://hdl.handle.net/20.500.12708/65188 ( reposiTUm)

Koch, T., Seidler, S., Bernstoff, S., & Halwax, E. (2003). Microhardness of quenched Polypropylene. In 6th Austrian Polymer Meeting. Austrian Polymer Meeting, Wien, Austria. http://hdl.handle.net/20.500.12708/45075 ( reposiTUm)

Seidler, S. (2023). digital human zentral: (K)ein Widerspruch? In G. Krause (Ed.), Die Praxis des Digitalen Humanismus : Welchen Beitrag Unternehmen dazu leisten und wie sie davon profitieren können (pp. 255–268). Springer Vieweg. https://doi.org/10.1007/978-3-658-42946-1_18 ( reposiTUm)

Seidler, S., & Brauner, G. (2014). Energie - Umwelt - Wirtschaft: Gegensätze oder drei Teile eines Ganzen. In energy2121 - Bilder zur Energiezukunft (pp. 170–176). Omninum. http://hdl.handle.net/20.500.12708/28508 ( reposiTUm)

Seidler, S., & Grellmann, W. (2005). Schlagartige Beanspruchung. In W. Grellmann & S. Seidler (Eds.), Kunststoffprüfung (pp. 156–169). Carl Hanser Verlag. http://hdl.handle.net/20.500.12708/26017 ( reposiTUm)

Grellmann, W., & Seidler, S. (2005). Einleitung. In W. Grellmann & S. Seidler (Eds.), Kunststoffprüfung (pp. 1–14). Carl Hanser Verlag. http://hdl.handle.net/20.500.12708/26016 ( reposiTUm)

Seidler, S., & Grellmann, W. (2005). Wärmeformbeständigkeit. In W. Grellmann & S. Seidler (Eds.), Kunststoffprüfung (pp. 591–599). Carl Hanser Verlag. http://hdl.handle.net/20.500.12708/26022 ( reposiTUm)

Seidler, S., & Grellmann, W. (2005). Härteprüfverfahren. In W. Grellmann & S. Seidler (Eds.), Kunststoffprüfung (pp. 192–214). Carl Hanser Verlag. http://hdl.handle.net/20.500.12708/26018 ( reposiTUm)

Grellmann, W., & Seidler, S. (2005). Zähigkeitsbewertung mit bruchmechanischen Methoden. In W. Grellmann & S. Seidler (Eds.), Kunststoffprüfung (pp. 243–298). Carl Hanser Verlag. http://hdl.handle.net/20.500.12708/26019 ( reposiTUm)

Bierögel, C., Seidler, S., & Grellmann, W. (2005). Hybride Verfahren der Kunststoffdiagnostik. In W. Grellmann & S. Seidler (Eds.), Kunststoffprüfung (pp. 521–536). Carl Hanser Verlag. http://hdl.handle.net/20.500.12708/26021 ( reposiTUm)

Seidler, S., & Grellmann, W. (2005). Thermische Eigenschaften. In W. Grellmann & S. Seidler (Eds.), Kunststoffprüfung (pp. 299–317). Carl Hanser Verlag. http://hdl.handle.net/20.500.12708/26020 ( reposiTUm)

Grellmann, W., & Seidler, S. (2014). Polymers: Polymer Solids and Polymer Melts - Mechanical and Thermomechanical Properties of Polymers. In K.-F. Arndt & M. D. Lechner (Eds.), Landolt-Börnstein, Volume 6 Polymers, Subvolume A Polymer Solids and Polymer Melts, Part 3 Mechanical and Thermomechanical Properties of Polymers: Vol. Volume 6, Subvolume A, Part 3. Springer. https://doi.org/10.1007/978-3-642-55166-6 ( reposiTUm)

Grellmann, W., & Seidler, S. (Eds.). (2014). Landolt-Börnstein, Volume 6 Polymers, Subvolume A Polymer Solids and Polymer Melts, Part 3 Mechanical and Thermomechanical Properties of Polymers. Springer. http://hdl.handle.net/20.500.12708/23815 ( reposiTUm)

Grellmann, W., & Seidler, S. (Eds.). (2007). Polymer Testing. Carl Hanser Verlag. http://hdl.handle.net/20.500.12708/22732 ( reposiTUm)

Grellmann, W., & Seidler, S. (Eds.). (2005). Kunststoffprüfung. Carl Hanser Verlag. http://hdl.handle.net/20.500.12708/22677 ( reposiTUm)

Gäbler, S., Koch, T., Stampfl, J., Seidler, S., Heller, C., Baudis, S., Liska, R., & Weidisch, R. (2008). Determination of the Viscoelastic Properties of Hydrogels based on Polyethylene Glycol Diacrylate (PEG-DA). Materials Science and Engineering - MSE 2008, Nürnberg, EU. http://hdl.handle.net/20.500.12708/92552 ( reposiTUm)

Markut-Kohl, R., Seidler, S., Carpentieri, I., & Costa, L. (2008). Oxidation of PE-UHMW investigated with FTIR methods used in current research. COST Action 533 “Materials for Improved Wear Resistance of Total Artificial Joints” , Workshop - 06.-08. Oct, 2008 in Athens, Greece (GR), Athen, EU. http://hdl.handle.net/20.500.12708/92694 ( reposiTUm)

Seidler, S. (2007). Biokompatible Werkstoffe - Möglichkeiten und Grenzen am Beispiel des Kunststoffes Polyethylen. Seminar des Institutes für Allgemeine Physik, TU Wien, Austria. http://hdl.handle.net/20.500.12708/92486 ( reposiTUm)

Markut, R., & Seidler, S. (2007). Nanoindentation of the Second Viennese Cross-Linked Hip Retrieval. Materials for Improved Wear Resistance of Total Artificial Joints, COST Action 533 Biotrobology, 29.-31.10.2007, Eibar/ Spain, EU. http://hdl.handle.net/20.500.12708/92425 ( reposiTUm)

Seidler, S. (2006). Macro - Micro - Nano: Scaling Problems in Mechanical Testing. 1st Central European Workshop on Polymer Science and Technology, Zlin, Czech Republic, EU. http://hdl.handle.net/20.500.12708/92204 ( reposiTUm)

Seidler, S. (2005). Makro - Mikro - Nano: Werkstoffcharakterisierung und Prüfung. Vortragsreihe Know-how der TU Wien für die Wirtschaft: neue Werkstoffe: Entwicklung - Charakterisierung - Anwendung, Wirtschaftskammer Wien, Austria. http://hdl.handle.net/20.500.12708/92133 ( reposiTUm)

Fritscher, C., Lichtenegger, H. C., Stampfl, J., Hüsing, N., Liska, R., & Seidler, S. (2004). Fabrication of bio-inspired ceramic composites. Micro-mechanical properties of biomaterials, ECI-Conference, Tomar, Portugal, Austria. http://hdl.handle.net/20.500.12708/91964 ( reposiTUm)

Haberland, E. J., Koch, T., Burkert, S., Klemenz, A., & Seidler, S. (2004). Pilotstudie zur Nanoindentation an Gehörknöchelchen-Hartschnitten. 3rd Symposium Micro- and Nanostructures of Biological Systems, Halle, Austria. http://hdl.handle.net/20.500.12708/91970 ( reposiTUm)

Koch, T., & Seidler, S. (2004). Einfluss der Zusammensetzung und Abkühlgeschwindigkeit auf die Mikrohärte von PP/HDPE-Blends. Werkstoffwoche 2004, München, Austria. http://hdl.handle.net/20.500.12708/91971 ( reposiTUm)

Seidler, S. (2004). Hierarchisch strukturierte Materialien. 1. Wiener Biomaterialsymposium, Wien, Austria. http://hdl.handle.net/20.500.12708/91982 ( reposiTUm)

Fritscher, C., Lichtenegger, H. C., Stampfl, J., Hüsing, N., Liska, R., & Seidler, S. (2004). Fabrication of bio-inspired ceramic composites. Junior Euromat 2004, Lausanne, Switzerland, Austria. http://hdl.handle.net/20.500.12708/91963 ( reposiTUm)

Fritscher, C., Lichtenegger, H. C., Stampfl, J., Hüsing, N., Liska, R., & Seidler, S. (2004). Fabrication of bio-inspired ceramic composites. Micro-Mechanical Properties of Biomaterials, Tomar, Portugal, Austria. http://hdl.handle.net/20.500.12708/96609 ( reposiTUm)

Lichtenegger, H. C., Stampfl, J., Hüsing, N., Liska, R., & Seidler, S. (2004). Fabrication of bio-inspired ceramic composites. EUROMAT 2004, Lausanne, Schweiz, Austria. http://hdl.handle.net/20.500.12708/96610 ( reposiTUm)

Lichtenegger, H. C., Fritscher, C., Stampfl, J., Seidler, S., Hüsing, N., & Liska, R. (2004). 3-D templating of hierarchical materials. MRS Spring Meeting, San Francisco, United States of America (the). http://hdl.handle.net/20.500.12708/96571 ( reposiTUm)

Stampfl, J., Seidler, S., Wöß, A., & Fratzl, P. (2003). Rapid Protoyping zellularer Materialien. 49. Metallkundekolloquium: Werkstoffe - Einsatz und Entwicklungstendenzen, Leoben, Austria. http://hdl.handle.net/20.500.12708/91615 ( reposiTUm)

Papst, T., & Seidler, S. (2003). Untersuchungen zur Realisierbarkeit eines Aluminium-CFK-Verbundträgers. 14. DGM Symposium Verbundwerkstoffe und Werkstoffverbunde, Wien, Austria. http://hdl.handle.net/20.500.12708/91671 ( reposiTUm)

Seidler, S., & Zaruba, C. (2006). Untersuchung eines gerissenen flexiblen Panzerschlauches. http://hdl.handle.net/20.500.12708/34711 ( reposiTUm)

Seidler, S., & Zaruba, C. (2006). Bruchflächenuntersuchung an Druckfedern aus Hastalloy C4. http://hdl.handle.net/20.500.12708/34713 ( reposiTUm)

Seidler, S., & Zaruba, C. (2006). Zerstörungsfreie metallographische Untersuchung an einem Turm einer Windkraftanlage nach Brandeinwirkung. http://hdl.handle.net/20.500.12708/34715 ( reposiTUm)

Seidler, S., & Zaruba, C. (2006). Bruchflächenuntertsuchung an einem Schrumpfring. http://hdl.handle.net/20.500.12708/34718 ( reposiTUm)

Seidler, S., & Zaruba, C. (2006). Untersuchung an einm Gelenkwagenheber. http://hdl.handle.net/20.500.12708/34721 ( reposiTUm)

Seidler, S., & Zaruba, C. (2005). Untersuchung an Messingventilen als mögliche Ursache des Eintrages von Kupfer in ein Wasserleitungssystem. http://hdl.handle.net/20.500.12708/34638 ( reposiTUm)

Seidler, S., & Stampfl, J. (2005). Materialanalyse und Fraktographie an einem keramischen Insert für die Hüftendoprothese. http://hdl.handle.net/20.500.12708/34643 ( reposiTUm)

Seidler, S. (2002). Anwendung von DOE (Design of Experiments) im Spritzgießprozess von Thermoplasten im Autobil- und Elektroniksektor. http://hdl.handle.net/20.500.12708/34374 ( reposiTUm)

Seidler, S. (2002). Untersuchungen zum Aushärtungsverhalten von UV-härtendem Klebstoff. http://hdl.handle.net/20.500.12708/34399 ( reposiTUm)

Seidler, S. (2002). Materialanalyse von Dichtungsringen mittels Dynamischer Differenzkalorimetrie (DSC). http://hdl.handle.net/20.500.12708/34398 ( reposiTUm)

Seidler, S. (2002). Thermische Analyse (DSC und TGA/MS) zur Ermittlung der Schädigungsursache von O-Ringen aus undichten voreinstellbaren Thermostat Adaptern. http://hdl.handle.net/20.500.12708/34402 ( reposiTUm)

Seidler, S. (2002). Schadensuntersuchung an PP-Rohren. http://hdl.handle.net/20.500.12708/34401 ( reposiTUm)

Seidler, S. (2002). Al-Stahl und Mg-Stahl Verbindungen. http://hdl.handle.net/20.500.12708/34403 ( reposiTUm)

Seidler, S., & Zaruba, C. (2002). Mikroanalyse der metallischen Beschichtung an zwei Kennzeichenhaltern aus Kunststoff. http://hdl.handle.net/20.500.12708/34388 ( reposiTUm)

Seidler, S. (2002). Materialanalyse von Sikaflex 265 mittels Thermogravimetrischer Analyse gekoppelt mit Massenspektrometrie (TGA-MS). http://hdl.handle.net/20.500.12708/34397 ( reposiTUm)

Seidler, S. (2002). Lichtmikroskopische Untersuchungen zur Gefügehomogenität von Cantilevern für Gurtschlösser. http://hdl.handle.net/20.500.12708/34395 ( reposiTUm)

Seidler, S. (2002). Bestimmung der Härte nach Mohs an verkratztem Glas. http://hdl.handle.net/20.500.12708/34396 ( reposiTUm)