Fürbacher, R., Liedl, G., Grünsteidl, G., & Otto, A. (2024). Icing wind tunnel and erosion field tests of superhydrophobic surfaces caused by femtosecond laser processing. Wind, 4(2), 155–171. https://doi.org/10.3390/wind4020008 ( reposiTUm)

Fürbacher, R., Grünsteidl, G., Otto, A., & Liedl, G. (2024). Chemical and UV durability of hydrophobic and icephobic surface layers on femtosecond laser structured stainless steel. Coatings, 14(8), Article 924. https://doi.org/10.3390/coatings14080924 ( reposiTUm)

Zenz, C., Buttazzoni, M., Florian, T., Crespo Armijos, K. E., Gomez Vazquez, R., Liedl, G., & Otto, A. (2024). A compressible multiphase Mass-of-Fluid model for the simulation of laser-based manufacturing processes. Computers and Fluids, 268, Article 106109. https://doi.org/10.1016/j.compfluid.2023.106109 ( reposiTUm)

Lasemi, N., Liedl, G., & Rupprechter, G. (2023). Formation of Periodic Surface Structures by Multipulse Femtosecond Laser Processing of Au-Coated Ni in Various Fluids. ACS Applied Engineering Materials, 1(4), 1263–1276. https://doi.org/10.1021/acsaenm.3c00070 ( reposiTUm)

Kumar, D., Liedl, G., Otto, A., & Artner, W. (2022). Insights into the Correlation between Residual Stresses, Phase Transformation, and Wettability of Femtosecond Laser-Irradiated Ductile Iron. Nanomaterials, 12(8), 1271. https://doi.org/10.3390/nano12081271 ( reposiTUm)

Kumar, D., Sauer, M., Kroechert Ching, K., Kalss, G., Catarina V.D. dos Santos, A., Ramer, G., Foelske, A., Lendl, B., Liedl, G., & Otto, A. (2021). Wettability transition of femtosecond laser patterned nodular cast iron (NCI) substrate. Applied Surface Science, 559(149897), 149897. https://doi.org/10.1016/j.apsusc.2021.149897 ( reposiTUm)

Fuerbacher, R., Liedl, G., & Murzin, S. P. (2021). Experimental study of spatial frequency transition of laser induced periodic surface structures. Journal of Physics: Conference Series, 1745(1), 012017. https://doi.org/10.1088/1742-6596/1745/1/012017 ( reposiTUm)

Buttazzoni, M., Zenz, C., Otto, A., Gómez Vázquez, R., Liedl, G., & Arias, J. L. (2021). A Numerical Investigation of Laser Beam Welding of Stainless Steel Sheets with a Gap. Applied Sciences, 11(6), 2549. https://doi.org/10.3390/app11062549 ( reposiTUm)

Lasemi, N., Rupprechter, G., Liedl, G., & Eder, D. (2021). Near-Infrared Femtosecond Laser Ablation of Au-Coated Ni: Effect of Organic Fluids andWater on Crater Morphology, Ablation Efficiency and Hydrodynamic Properties of NiAu Nanoparticles. Materials, 14(19), 5544. https://doi.org/10.3390/ma14195544 ( reposiTUm)

Murzin, S. P., Balyakin, V. B., Liedl, G., Melnikov, A. A., & Fürbacher, R. (2020). Improving Tribological Properties of Stainless Steel Surfaces by Femtosecond Laser Irradiation. Coatings, 10(7), 606. https://doi.org/10.3390/coatings10070606 ( reposiTUm)

Kumar, D., Liedl, G., & Gururaja, S. (2020). Formation of sub-wavelength laser induced periodic surface structure and wettability transformation of CFRP laminates using ultra-fast laser. Materials Letters, 276(128282), 128282. https://doi.org/10.1016/j.matlet.2020.128282 ( reposiTUm)

Lasemi, N., Rentenberger, C., Liedl, G., & Eder, D. (2020). The influence of fluid nature on femtosecond laser ablation properties of SiO2/Si target and synthesis of ultrafine-grained Si nanoparticles. Nanoscale Advances, 2(9), 3991–4002. https://doi.org/10.1039/d0na00317d ( reposiTUm)

Lasemi, N., Rentenberger, C., Pospichal, R., Cherevan, A. S., Pfaffeneder-Kmen, M., Liedl, G., & Eder, D. (2019). Femtosecond laser-assisted synthesis of Ni/Au BONs in various alcoholic solvents. Applied Physics A: Materials Science and Processing, 125(544). https://doi.org/10.1007/s00339-019-2826-z ( reposiTUm)

Murzin, S. P., Liedl, G., & Pospichal, R. (2019). Coloration of a copper surface by nanostructuring with femtosecond laser pulses. Optics and Laser Technology, 119(105574), 105574. https://doi.org/10.1016/j.optlastec.2019.105574 ( reposiTUm)

Edtmaier, C., Segl, J., Rosenberg, E., Liedl, G., Pospichal, R., & Steiger-Thirsfeld, A. (2018). Microstructural characterization and quantitative analysis of the interfacial carbides in Al(Si)/diamond composites. Journal of Materials Science. https://doi.org/10.1007/s10853-018-2734-1 ( reposiTUm)

Liedl, G., Vázquez, R. G., & Murzin, S. P. (2017). Joining of aluminium alloy and steel by laser assisted reactive wetting. Lasers in Manufacturing and Materials Processing, 5(1), 1–15. https://doi.org/10.1007/s40516-017-0049-8 ( reposiTUm)

Liedl, G., Pospichal, R., & Murzin, S. P. (2017). Features of Changes in the Nanostructure and Colorizing of Copper during Scanning with a Femtosecond Laser Beam. Journal of Computer Optics, 41(4), 504–509. http://hdl.handle.net/20.500.12708/146813 ( reposiTUm)

Murzin, S., & Liedl, G. (2017). Laser welding of dissimilar metallic materials with use of diffractive optical elements. Computer Optics, 41(6), 848–855. https://doi.org/10.18287/2412-6179-2017-41-6-848-855 ( reposiTUm)

Murzin, S., Bielak, R., & Liedl, G. (2016). Algorithm for calculation of the power density distribution of the laser beam to create a desired thermal effect on technological objects. Computer Optics, 40(5), 679–684. https://doi.org/10.18287/2412-6179-2016-40-5-679-684 ( reposiTUm)

Pospichal, R., & Liedl, G. (2014). Laser ablation of polyethylene terephthalate non-woven fabrics. Annals Of Faculty Engineering Hunedoara - International Journal Of Engineering, 1(12), 63–68. http://hdl.handle.net/20.500.12708/156375 ( reposiTUm)

Gumpinger, J., Felber, S., & Liedl, G. (2013). Mechanisch-technologische Eigenschaften der Titanlegierung Ti-6Al-4V hergestellt mit Selective Laser Melting (SLM). Schweiss-&Prüftechnik, 11/12, 184–190. http://hdl.handle.net/20.500.12708/155376 ( reposiTUm)

Pospichal, R., & Liedl, G. (2013). Simulation of periodic nanostructures fabricated by multi-beam interference of an ultra-short pulse laser. TEHNICKI VJESNIK-TECHNICAL GAZETTE, 20(1), 131–136. http://hdl.handle.net/20.500.12708/154812 ( reposiTUm)

Pospichal, R., Bielak, R., & Liedl, G. (2012). SCWTEX - Simultaneous Cutting And Welding Of Textiles. ACTA TECHNICA CORVINIENSIS - Bulletin of Engineering, 1, 117–121. http://hdl.handle.net/20.500.12708/163404 ( reposiTUm)

Pospichal, R., & Liedl, G. (2012). Simulation Of The Resulting Intensity Distribution By Multi‐beam Interference Of An Ultra‐short Pulse Laser. ACTA TECHNICA CORVINIENSIS - Bulletin of Engineering, 5(4), 85–90. http://hdl.handle.net/20.500.12708/163402 ( reposiTUm)

Liedl, G., & Bielak, R. (2011). Joining of Aluminum and Steel in Car Body Manufacturing. Physics Procedia, 12, 150–156. https://doi.org/10.1016/j.phpro.2011.03.019 ( reposiTUm)

Muhic, T., Kosec, L., & Liedl, G. (2011). Assessment of the Effect of Nd:YAG Laser Pulse Operating Parameters on the Metallurgical Characteristics of Different Tool Steels using DOE Software. METALURGIJA, 50(2), 101–105. http://hdl.handle.net/20.500.12708/161738 ( reposiTUm)

Pasic, H., Pudar, M., Enzinger, N., Ivanova, J., Bruckner, J., Hampel, S., Liedl, G., Karner, W., Figner, G., Weirather, T., & Leitner, A. (2009). Einsatz unterschiedlicher Schweißverfahren zum Verbinden von Stahl mit Aluminium im Karosseriebau. Schweiss-&Prüftechnik, SONDERBAND, 25–27. http://hdl.handle.net/20.500.12708/165932 ( reposiTUm)

Wichart, K., Ivanova, J., Bruckner, J., Enzinger, N., Figner, G., Liedl, G., Basalka, H., & Leitner, A. (2009). Einsatz von Bimetallen für Hybridverbindungen. Schweiss-&Prüftechnik, SONDERBAND, 28–31. http://hdl.handle.net/20.500.12708/165933 ( reposiTUm)

Barbatti, C., Garcia, J., Liedl, G., & Pyzalla, A. R. (2007). Joining of cemented carbides to steel by laser beam welding. Materials Science & Engineering Technology, 38(11), 908–914. http://hdl.handle.net/20.500.12708/170675 ( reposiTUm)

Kirnbauer, A., Peck, E., Hajas, B., Kreuziger, L., Pflaum, C., Liedl, G., & Mayrhofer, P. H. (2024). Production and Characterization of Coating-Substrate Combinations for Sustainable Ceramic Data Storage Media. In Program Book: 100th IUVSTA Workshop (pp. 28–28). http://hdl.handle.net/20.500.12708/212751 ( reposiTUm)

Fürbacher, R., Liedl, G., & Otto, A. (2022). Fast transition from hydrophilic to superhydrophobic, icephobic properties of stainless steel samples after femtosecond laser processing and exposure to hydrocarbons. In 12th CIRP Conference on Photonic Technologies [LANE 2022] (pp. 643–647). Elsevier. https://doi.org/10.34726/3381 ( reposiTUm)

Fürbacher, R., & Liedl, G. (2021). Investigations on the wetting and deicing behavior of laser treated hydrophobic steel surfaces. In Laser-based Micro- and Nanoprocessing XV (Vol. 11674). SPIE. https://doi.org/10.1117/12.2578138 ( reposiTUm)

Kumar, D., Kroechert Ching, K., Kalss, G., & Liedl, G. (2021). Femtosecond laser structuring of nodular cast iron for anticorrosion and thermally stable superhydrophobic surface. In Lasers in Manufacturing Conference (p. 6). WLT - Wissenschaftliche Gesellschaft Lasertechnik e.V. http://hdl.handle.net/20.500.12708/68242 ( reposiTUm)

Murzin, S., Kazanskiy, N., Liedl, G., Bielak, R., Melnikov, A., & Osipov, S. (2020). Study of structure of dual phase steel after laser heat treatment using moving distributed surface heat sources. In 2020 International Conference on Information Technology and Nanotechnology (ITNT). 2020 International Conference on Information Technology and Nanotechnology (ITNT), Samara, Russian Federation (the). IEEE. https://doi.org/10.1109/itnt49337.2020.9253361 ( reposiTUm)

Bielak, R., Murzin, S. P., Liedl, G., & Otto, A. (2020). Modelling of temperature fields in DP1000 steel during laser treatment using diffractive optical elements. In Journal of Physics: Conference Series (p. 012016). IOP. https://doi.org/10.1088/1742-6596/1745/1/012016 ( reposiTUm)

Murzin, S. P., Kazanskiy, N. L., Liedl, G., & Humenberger, G. (2019). Testing of diffractive optical element as part of specific CO₂ laser equipment for metallic materials modification. In Journal of Physics: Conference Series (p. 022025). IOP Publishing. https://doi.org/10.1088/1742-6596/1368/2/022025 ( reposiTUm)

Murzin, S. P., Liedl, G., & Pospichal, R. (2019). Colorization of copper surfaces by nanostructure modifications with ultrashort laser pulses. In Journal of Physics: Conference Series (p. 022063). IOP Publishing. https://doi.org/10.1088/1742-6596/1368/2/022063 ( reposiTUm)

Murzin, S. P., Liedl, G., Bielak, R., & Melnikov, A. A. (2019). Conditions improving of laser heating for forming of materials with a ferritic-martensitic structure. In Journal of Physics: Conference Series (p. 022023). IOP Publishing. https://doi.org/10.1088/1742-6596/1368/2/022023 ( reposiTUm)

Humenberger, G., Liedl, G., Ferrari, M., & Bammer, F. (2018). Polarisation Measurement of the Emitted Thermal Radiation During Laser Material Processing. In B. Katalinic (Ed.), Proceedings of the 29th International DAAAM Symposium 2018 (pp. 0922–0930). Danube Adria Association for Automation and Manufacturing, DAAAM. https://doi.org/10.2507/29th.daaam.proceedings.133 ( reposiTUm)

Murzin, S. P., Liedl, G., Pospichal, R., & Melnikov, A. A. (2018). Study of the action of a femtosecond laser beam on samples of a Cu-Zn alloy. In Journal of Physics: Conference Series (p. 012138). Journal of Physics: Conference Series IOP. https://doi.org/10.1088/1742-6596/1096/1/012138 ( reposiTUm)

Murzin, S. P., Liedl, G., & Bielak, R. (2017). Redistribution of the laser beam power using diffractive optical elements. In V. A. Andreev, A. V. Bourdine, V. A. Burdin, O. G. Morozov, & A. H. Sultanov (Eds.), Proceedings of SPIE - Optical Technologies for Telecommunications, vol. 10342 (pp. 45–52). SPIE. http://hdl.handle.net/20.500.12708/67626 ( reposiTUm)

Segl, J., Edtmaier, C., Liedl, G., & Pospichal, R. (2017). Preparation of the diamond-metal interface in Al-diamond MMCs. In International Forum of Young Researchers: Topical Issues of Subsoil Usage (pp. 173–175). St. Petersburg Mining University. http://hdl.handle.net/20.500.12708/49789 ( reposiTUm)

Murzin, S. P., Kazanskiy, N. L., Liedl, G., Otto, A., & Bielak, R. (2017). Laser beam shaping for modification of materials with ferritic-martensitic structure. In Procedia Engineering (pp. 164–168). Elsevier. https://doi.org/10.1016/j.proeng.2017.09.592 ( reposiTUm)

Gómez Vázquez, R., Otto, A., Liedl, G., Feichtenschlager, R., & Stiglbrunner, C. (2016). Simulation of laser welding aluminum-to-steel. In Mathematical Modelling of Weld Phenomena 11 (pp. 99–108). Verlag der Technischen Universität Graz. http://hdl.handle.net/20.500.12708/67260 ( reposiTUm)

Pospichal, R., Liedl, G., Kremser, J., & Bonilla, A. (2015). Possibilities And Limitations Of Weld Seam Tracking In Laser Welding. In Conference Proceedings - 7th International Scientific Conference Management of Technology - Step to Sustainable Production (p. 9). Croatian Association for PLM. http://hdl.handle.net/20.500.12708/67245 ( reposiTUm)

Gómez Vázquez, R., Otto, A., Liedl, G., & Feichtenschlager, R. (2015). Simulation of Laser Welding of Dissimilar Metals. In Lasers in Manufacturing 2015 (p. 8). http://hdl.handle.net/20.500.12708/67224 ( reposiTUm)

Humenberger, G., Liedl, G., & Heidlmayr, S. (2014). Measurement of the Emitted Thermal Radiation During CO2-Laser Cutting. In MOTSP 2014 Conference Proceedings (p. 8). Croatian Association for PLM. http://hdl.handle.net/20.500.12708/67004 ( reposiTUm)

Liedl, G., Koch, H., & Otto, A. (2013). Fügen mit Laserstrahlung. In N. Enzinger (Ed.), Fügetechnik in Österreich (pp. 36–40). Schweiss- und Prüftechnik. http://hdl.handle.net/20.500.12708/66765 ( reposiTUm)

Pospichal, R., & Liedl, G. (2013). Laser Processing Of Non-Woven Fabrics. In MOTSP 2013 - Conference Proceedings (p. 8). Croatian Association for PLM. http://hdl.handle.net/20.500.12708/66855 ( reposiTUm)

Liedl, G., & Pospichal, R. (2012). FE-simulation of laser assisted joining of aluminum-steel. In K. R. Allakhverdiev (Ed.), XIX International Symposium on High-Power Laser Systems and Applications 2012. SPIE. http://hdl.handle.net/20.500.12708/66628 ( reposiTUm)

Liedl, G., & Pospichal, R. (2012). Simulation of laser multi-beam interference patterns for nanostructuring of materials. In COMEC VII Conferencia Internacional de Ingenieria Mechánica (p. 10). http://hdl.handle.net/20.500.12708/66629 ( reposiTUm)

Pospichal, R., & Liedl, G. (2012). Fabrication of Periodic Nanostructures by Multi-Beam Interference Using an Ultra-Short Pulse Laser. In MOTSP 2012 - Proceedings of the 4th International Scientific Conference Management of Technology Step to Sustainable Production (pp. 328–335). Croatian Association for PLM. http://hdl.handle.net/20.500.12708/66550 ( reposiTUm)

Bielak, R., Liedl, G., & Pospichal, R. (2011). FEM simulation of technical textiles laser cuting. In Technology 2011 (pp. 371–376). Slovak University of Technology. http://hdl.handle.net/20.500.12708/66364 ( reposiTUm)

Liedl, G. (2011). Laser Assisted Joining of Dissimilar Materials. In A.-M. El-Batahgy & M. Waly (Eds.), Proceedings IQCMEA-ICF - Processing, Performance and Failure Analysis of Engineering Materials (pp. 22–31). http://hdl.handle.net/20.500.12708/66407 ( reposiTUm)

Bielak, R., & Liedl, G. (2011). FEM analysis of debonding problems during bi-metal wire joining of aluminum and steel sheets. In Internetový časopis MATERIALS SCIENCE AND TECHNOLOGY (pp. 83–88). Materials Science and Technology. http://hdl.handle.net/20.500.12708/66324 ( reposiTUm)

Pospichal, R., Bielak, R., & Liedl, G. (2011). SCWTEX - Simultaneous Cutting and Welding of Textiles. In Proceedings of the 3rd International Scientific Conference Management of Technology Step to Sustainable Production (pp. 368–374). http://hdl.handle.net/20.500.12708/66365 ( reposiTUm)

Bielak, R., Liedl, G., & Behúlová, M. (2010). Contribution to the lightweight alloy warm tube hydroforming. In COMEC 2010. Comec 2010 : VI Conferencia Cientifica Internacional de Ingeniería Mecánica, Villa Clara, Cuba, Non-EU. http://hdl.handle.net/20.500.12708/66188 ( reposiTUm)

Bammer, F., Petkovsek, R., Dominguez, H., & Liedl, G. (2010). Nd:YAG-Laser-Q-switching with a Photo-Elastic Modulator and Applications. In Proceedings of SPIE, Solid State Lasers and Amüplifiers IV, and High-Power Lasers (pp. 77210Y-1-77210Y – 6). SPIE Proceedings. http://hdl.handle.net/20.500.12708/66215 ( reposiTUm)

Kratky, A., Schuöcker, D., & Liedl, G. (2008). Processing with kW fibre lasers - advantages and limits. In Proceedings (pp. 1–11). SPIE. http://hdl.handle.net/20.500.12708/65778 ( reposiTUm)

Liedl, G., & Schuöcker, D. (2007). Dieless wire drawing with lasers. In Proceedings SPIE (pp. 444–450). SPIE. http://hdl.handle.net/20.500.12708/66517 ( reposiTUm)

Lackner, M., Schwarzott, M., & Liedl, G. (2007). Heat transfer to a single plastic resin particle - Experimental investigations by flames and laer pulses. In 3rd European Combustion Meeting ECM 2007 (p. 6). European Combustion Meeting 2007. http://hdl.handle.net/20.500.12708/66516 ( reposiTUm)

Lackner, M., Schwarzott, M., & Liedl, G. (2007). Heat transfer to a single plastic resin particle - Experimental investigations by flames and laser pulses. In Proceedings ECM2007. 3rd European Combustion Meeting ECM 2007, Chania, Crete, EU. http://hdl.handle.net/20.500.12708/65540 ( reposiTUm)

Liedl, G., Schuöcker, D., Geringer, B., & Graf, J. (2006). Laser induced ignition. In Proceedings SPIE (pp. 1–6). SPIE. http://hdl.handle.net/20.500.12708/65435 ( reposiTUm)

Liedl, G., & Schuöcker, D. (2004). Laser induced ignition of gasoline direct injection engines. In Proceedings SPIE (pp. 955–960). SPIE. http://hdl.handle.net/20.500.12708/65175 ( reposiTUm)

Kratky, A., Liedl, G., & Bielak, R. (2004). LADD - Laser assisted deep drawing. In Proceedings of the 4th LANE (pp. 1125–1134). Meisenbach Bamberg. http://hdl.handle.net/20.500.12708/65176 ( reposiTUm)

Kaltenbrunner, M., Liedl, G., Kratky, A., & Bielak, R. (2004). LAWD - Laser assisted wire drawing. In Proceedings of the 4th LANE (pp. 1175–1181). Meisenbach Bamberg. http://hdl.handle.net/20.500.12708/65177 ( reposiTUm)

Bielak, R., Bammer, F., Schuöcker, G., Liedl, G., & Kratky, A. (2004). Virtual age in education and training. In Proceedings of the 4th LANE (pp. 1221–1226). Meisenbach Bamberg. http://hdl.handle.net/20.500.12708/65205 ( reposiTUm)

Schuöcker, D., Kratky, A., Bammer, F., Liedl, G., & Holzinger, B. (2003). New and Forthcoming Application of High Power Lasers: LASER ASSISTED FORMING. In Laser Technology and Laser Applications. LTLA - Int. Conf. Laser Technology and Laser Application, St. Petersburg, Austria. http://hdl.handle.net/20.500.12708/65154 ( reposiTUm)

Schuöcker, D., Liedl, G., & Kratky, A. (2003). Laser assisted forming - a promising new application of high power lasers. In Proc. of the 16th neeting on modelling - simulation virtuality in high power laser technology. Proceedings M4PL16, Igls/Austria, Austria. http://hdl.handle.net/20.500.12708/65156 ( reposiTUm)

Schuöcker, D., Kratky, A., Bammer, F., Liedl, G., & Holzinger, B. (2003). Laser Assisted Forming. In Proceedings. ICALEO 2003 - Int. Congress on Applications of Lasers & Electro-Optics, Jacksonville, Austria. http://hdl.handle.net/20.500.12708/65155 ( reposiTUm)

Liedl, G., Kratky, A., & Schuöcker, D. (2002). Laser assisted shaping of metallic sheets and wires - a promising new application of high power lasers. In High Power Laser Ablation IV Vol. 4760 (pp. 633–644). http://hdl.handle.net/20.500.12708/65139 ( reposiTUm)

Liedl, G., Schuöcker, D., & Kny, E. (2002). Rapid Prototyping with Lasers using Metal Powder Jets. In Laser Processing of Advanced Materials and Laser Microtechnologies (pp. 399–405). SPIE. https://doi.org/10.1117/12.515632 ( reposiTUm)

Liedl, G. (2008). Laser Micromachining. In M. Lackner (Ed.), Lasers in Chemistry (pp. 923–941). Wiley-VCH. http://hdl.handle.net/20.500.12708/26126 ( reposiTUm)

Peck, E., Hajas, B., Kirnbauer, A., Kreuziger Lukas, Liedl, G., Pflaum Christian, & Mayrhofer, P. H. (2024, September 3). Production and characterization of coating-substrate combinations for ceramic data storage media [Poster Presentation]. International Conference on Plasma Surface Engineering 2024, Erfurt, Germany. http://hdl.handle.net/20.500.12708/206146 ( reposiTUm)

Peck, E., Hajas, B., Kirnbauer, A., Kreuziger, L., Pflaum, C., Liedl, G., & Mayrhofer, P. H. (2024, May 20). Production and Characterization of Coating-Substrate Combinations for Ceramic Data Storage Media [Conference Presentation]. International Conference on Metallurgical Coatings and Thin Films, San Diego, United States of America (the). http://hdl.handle.net/20.500.12708/206145 ( reposiTUm)

Liedl, G. (2023, March 17). Laser-Assisted Joining of Dissimilar Materials for Lightweight Components [Conference Presentation]. Welding and Allied Processes - Blue Print Africa, Cairo, Egypt. http://hdl.handle.net/20.500.12708/176055 ( reposiTUm)

Lasemi, N., Liedl, G., & Rupprechter, G. (2022, October 25). Multi-pulse femtosecond laser ablation of Au-coated Ni foil in various fluids: A way to produce hierarchical periodic surface structures and nanomaterials [Keynote Presentation]. Functional Materials 2022, Bratislava, Slovakia. ( reposiTUm)

Lasemi, N., Rupprechter, G., Liedl, G., & Eder, D. (2021). Ultrashort laser ablation of Au-coated Ni foil and SiO2/Si targets in liquids: analysis of synthesized nanoparticles and ablation craters. International Online Conference on Functional Materials, Online, Unknown. http://hdl.handle.net/20.500.12708/101601 ( reposiTUm)

Gebeshuber, I. C., Dorninger, C., Liedl, G., Kaspar, A., & Myerscough, T. (2018). HTL Spengergasse - Quo vadis (Podiumsdiskussion). Festakt 260 Jahre Spengergasse, Wirtschaftskammer Wien, Austria. http://hdl.handle.net/20.500.12708/133895 ( reposiTUm)

Liedl, G., Mayr, M. M., & Whitmore, K. (2018). Laser assisted joining of aluminum-copper. International Conference on Photonics Research (Interphotonics 2018), Antalya, Turkey. http://hdl.handle.net/20.500.12708/94938 ( reposiTUm)

Liedl, G., & Humenberger, G. (2018). Usage of emitted thermal radiation during laser processing of materials for quality control. Welding and Failure Analysis of Engineering Materials - WAFA 2018, Aswan, Egypt. http://hdl.handle.net/20.500.12708/94937 ( reposiTUm)

Gómez Vázquez, R., Otto, A., Liedl, G., Feichtenschlager, R., Stiglbrunner, C., & Tatra, S. (2016). Simulation of the Dissimilar Joining Process of Aluminum and Steel by Laser Assisted Wetting. 12th International Conference on Numerical Methods in Industrial Forming Processes NUMIFORM 2016, Troyes, France. http://hdl.handle.net/20.500.12708/94587 ( reposiTUm)

Liedl, G., & Bielak, R. (2011). Joining of Aluminum and Steel in Car Body Manufacturing. 6th International WLT Conference on Lasers in Manufacturing, München, EU. http://hdl.handle.net/20.500.12708/93233 ( reposiTUm)

Liedl, G., Bruckner, J., Enzinger, N., Ivanova, J., & Pudar, M. (2009). Laserschweißen von Stahl und Aluminium. Hochleistungslaser-Forum, Gmunden, Austria. http://hdl.handle.net/20.500.12708/92849 ( reposiTUm)

Barbatti, C., Garcia, J., Liedl, G., Pinto, H., & Pyzalla, A. R. (2007). Joining of Hardmetal to Steel by Laser Beam Welding. 16. DGM-Symposium Verbundwerkstoffe und Werkstoffverbunde, Bremen/ Germany, EU. http://hdl.handle.net/20.500.12708/92634 ( reposiTUm)

Liedl, G. (2004). Laserzündung von direkteinspritzenden Ottomotoren. Anwendertreffen Laserverbund Berlin-Brandenburg, Wien/Austria, Austria. http://hdl.handle.net/20.500.12708/92033 ( reposiTUm)

Liedl, G. (2004). Laseranwendungen in Wissenschaft und Technik. HSC-Net, Wien/Austria, Austria. http://hdl.handle.net/20.500.12708/92034 ( reposiTUm)

Liedl, G. (2004). Laserzündung von Motoren. Argelas Generalversammlung, Wien, Austria. http://hdl.handle.net/20.500.12708/91809 ( reposiTUm)

Liedl, G. (2003). Laser Ignition. Laser Seminar/Mauterndorf, Mauterndorf/Austria, Austria. http://hdl.handle.net/20.500.12708/91751 ( reposiTUm)

Liedl, G. (2003). European System of Vocational Training in Laser Technology. 8th International Conference Technology 2003, Bratislava, Austria. http://hdl.handle.net/20.500.12708/91750 ( reposiTUm)

Schulmeister, K., Schmitzer, C., Duftschmid, K., Liedl, G., & Schröder, K. (1996). Secondary optical radiation og high power laser beam welding. Proceedings IRPA, Wien/Austria, Austria. http://hdl.handle.net/20.500.12708/91805 ( reposiTUm)

Liedl, G., Stiglbrunner, C., Budde, B., Rhomberg, W., & Wepner, B. (2014). Potenzialerhebung Lasertechnik. http://hdl.handle.net/20.500.12708/38378 ( reposiTUm)

Bielak, R., & Liedl, G. (2011). Modulation and Simulation of Effects during Laser Material Processing - Proposal of Simplified 2D and 3D Simulation Models. http://hdl.handle.net/20.500.12708/36744 ( reposiTUm)

Schumi, T., & Liedl, G. (2011). Laser-Lichtspur für einspurige Fahrzeuge. http://hdl.handle.net/20.500.12708/37138 ( reposiTUm)

Liedl, G., Bielak, R., Bammer, F., Kratky, A., Ebner, W., & Gómez Vázquez, R. (2009). Abgasreinigung durch Laserstrahlung. http://hdl.handle.net/20.500.12708/35693 ( reposiTUm)

Liedl, G. (2008). Laserhärten von Blechen. http://hdl.handle.net/20.500.12708/34891 ( reposiTUm)

Liedl, G. (2008). Anhang zum Bericht Laserhärten von Blechen. http://hdl.handle.net/20.500.12708/34892 ( reposiTUm)

Bammer, F., Kratky, A., Liedl, G., & Schuöcker, D. (2008). Bericht zur Subvention für das Jahr 2007 “KOMPETENZ FASERLASER.” http://hdl.handle.net/20.500.12708/35324 ( reposiTUm)

Liedl, G. (2007). Laserhärten von Blechen. http://hdl.handle.net/20.500.12708/34893 ( reposiTUm)

Liedl, G., & Bielak, R. (2007). Simulation der Krafteinwirkung auf ein Bimetallband. http://hdl.handle.net/20.500.12708/34894 ( reposiTUm)

Liedl, G., & Bielak, R. (2006). Simulation der Krafteinwirkung auf ein Bimetallband. http://hdl.handle.net/20.500.12708/34704 ( reposiTUm)

Liedl, G. (2006). Temperaturmessung beim Laserschweißen. http://hdl.handle.net/20.500.12708/34705 ( reposiTUm)

Kratky, A., Liedl, G., Bielak, R., Holzinger, B., Humenberger, G., Ebner, W., Schulmeister, K., Schuöcker, D., & Kaltenbrunner, M. (2006). Tätigkeitsbericht für die Basissubvention 2005 (GZ. BMVIT-612.005/0001-III/I1/2005). http://hdl.handle.net/20.500.12708/34688 ( reposiTUm)

Liedl, G. (2005). Laserhärten von Blechen. http://hdl.handle.net/20.500.12708/34675 ( reposiTUm)

Liedl, G. (2004). Studie über miniaturisierte Festkörperlaser. http://hdl.handle.net/20.500.12708/34555 ( reposiTUm)

Liedl, G. (2004). Laserglühen. http://hdl.handle.net/20.500.12708/34556 ( reposiTUm)

Kratky, A., Liedl, G., & Humenberger, G. (2004). Machbarkeitsstudie eines IHU Endbeschnitts. http://hdl.handle.net/20.500.12708/34561 ( reposiTUm)

Kratky, A., Liedl, G., & Schuöcker, D. (2004). Laserunterstütztes Tiefziehen mit einem Diodenlaser. http://hdl.handle.net/20.500.12708/34557 ( reposiTUm)

Liedl, G. (2003). Studie zum Zünden von Holzpellets mit Hilfe eines Lasers. http://hdl.handle.net/20.500.12708/34464 ( reposiTUm)

Liedl, G. (2003). Laserschneiden von Verbandsstoffen. http://hdl.handle.net/20.500.12708/34418 ( reposiTUm)

Liedl, G. (2002). Zünden von Verbrennungsmotoren mittels kurzer Laserpulse. http://hdl.handle.net/20.500.12708/34416 ( reposiTUm)

Liedl, G. (2002). Laserzündung. http://hdl.handle.net/20.500.12708/34417 ( reposiTUm)

Liedl, G., & Schuöcker, D. (2001). Marktübersicht Hochleistungdioden- und Festkörperlaser. http://hdl.handle.net/20.500.12708/34676 ( reposiTUm)

Liedl, G. (2001). Untersuchungen beim Laserschweissen von Directorblechen. http://hdl.handle.net/20.500.12708/34465 ( reposiTUm)

Liedl, G. (2000). Mikromaterialbearbeitung mit einem Excimerlaser : Industrielle Anwendungen eines Excimerlasers [Dissertation, Technische Universität Wien]. reposiTUm. http://hdl.handle.net/20.500.12708/182359 ( reposiTUm)