Katalinic, B., Pryanichnikov, V., Ueda, K., Cesarec, P., Kukushkin, I. K., & Kettler, R. (2012). Bionic Assembly System: working modes, control and scheduling. International Journal of Industrial Engineering and Management, VOL 3(3), 121–131. http://hdl.handle.net/20.500.12708/164741 ( reposiTUm)

Ljoljic, B., Katalinic, B., Stuja, K., & Kordic, V. (2002). Simulation of Complex Flexible Assembly System. Acta Mechanica Slovaca, VOL.6(2/2002), 117–122. http://hdl.handle.net/20.500.12708/175164 ( reposiTUm)

Buyuk, U., Akdogan, A., Vanli, A. S., & Durakbasa, N. (2021). Minimizing Coating Process Sourced Hydrogen Embrittlement of Fasteners. In B. Katalinic (Ed.), Proceedings of the 32nd International DAAAM Symposium 2021 (pp. 0508–0513). Proceedings of the 32nd International DAAAM Virtual Symposium / DAAAM International, Vienna, Austria, EU, 2021. https://doi.org/10.2507/32nd.daaam.proceedings.073 ( reposiTUm)

Bodur, O., Stepanek, V., Walcher, E. M., & Durakbasa, N. (2020). Precision in Additive Manufacturing, Optimization and Evaluation of the Accuracy of 3D Printer based on GPS System. In B. Katalinic (Ed.), DAAAM Proceedings (pp. 0963–0972). DAAAM International. https://doi.org/10.2507/31st.daaam.proceedings.134 ( reposiTUm)

Akdogan, A., Vanli, A. S., & Durakbasa, N. (2020). Effect of Gating System Improvements on Product Quality in High Pressure Die Casting. In B. Katalinic (Ed.), DAAAM Proceedings (pp. 0459–0462). DAAAM International. https://doi.org/10.2507/31st.daaam.proceedings.064 ( reposiTUm)

Humenberger, G., Liedl, G., Ferrari, M., & Bammer, F. (2018). Polarisation Measurement of the Emitted Thermal Radiation During Laser Material Processing. In B. Katalinic (Ed.), Proceedings of the 29th International DAAAM Symposium 2018 (pp. 0922–0930). Danube Adria Association for Automation and Manufacturing, DAAAM. https://doi.org/10.2507/29th.daaam.proceedings.133 ( reposiTUm)

Kralik, M., Bachraty, M., Pokusova, M., & Durakbasa, N. (2017). Measuring of Friction Factor of Cutting Environment. In B. Katalinic (Ed.), DAAAM Proceedings (pp. 0118–0123). DAAAM International. https://doi.org/10.2507/28th.daaam.proceedings.015 ( reposiTUm)

Finkeldei, D., & Bleicher, F. (2016). Investigation Of Coolants In Machining Of Titanium Aluminides. In B. Katalinic (Ed.), 26th Daaam International Symposium On Intelligent Manufacturing And Automation (pp. 825–833). http://hdl.handle.net/20.500.12708/67461 ( reposiTUm)

Bas, G., Stoev, L., & Durakbasa, M. N. (2015). Assessment of the Production Quality in Machining by Integrating a System of High Precision Measurement. In B. Katalinic (Ed.), 25th DAAAM International Symposium on Intelligent Manufacturing and Automation, 2014 (pp. 1616–1624). Elsevier BV. https://doi.org/10.1016/j.proeng.2015.01.535 ( reposiTUm)

Tekic, Z., Cosic, I., & Katalinic, B. (2012). The Missing Link - Knowledge Creation and Innovation. In B. Katalinic (Ed.), Annals of DAAAM for 2012 & Proceedings of the 23rd International DAAAM Symposium: “Make Harmony between Technology and Nature, and Your Mind will Fly Free as a Bird” (p. 4). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/66699 ( reposiTUm)

Kukushkin, I. K., Katalinic, B., Cesarec, P., Zdyb, D., & Kettler, R. (2012). Modeling of Mobile Robot Behavior for Line-Less Bionic Assembly System. In B. Katalinic (Ed.), Annals of DAAAM for 2012 & Proceedings of the 23rd International DAAAM Symposium: “Make Harmony between Technology and Nature, and Your Mind will Fly Free as a Bird” (p. 6). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/66702 ( reposiTUm)

Gastermann, B., Luftensteiner, F., Stopper, M., & Katalinic, B. (2012). Multiple Stage Production Planning in Plain Manufacturing Environments. In B. Katalinic (Ed.), Annals of DAAAM for 2012 & Proceedings of the 23rd International DAAAM Symposium: “Make Harmony between Technology and Nature, and Your Mind will Fly Free as a Bird” (p. 4). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/66701 ( reposiTUm)

Katalinic, B. (2012). 20 Basic Characteristics of Doctor of Technical Sciences and Way how to Develop them. In B. Katalinic (Ed.), Annals of DAAAM for 2012 & Proceedings of the 23rd International DAAAM Symposium: “Make Harmony between Technology and Nature, and Your Mind will Fly Free as a Bird” (p. 1). Annals of DAAAM for 2012 & Proceeding of the 23rd International DAAAM Symposium/DAAAM International Vienna. http://hdl.handle.net/20.500.12708/66703 ( reposiTUm)

Jurjevic, M., Krsulja, M., Katalinic, B., Car, Z., & Sikulec, L. (2012). Automatic Measurement of Rotational Speed and Lathe Maintenance. In B. Katalinic (Ed.), Annals of DAAAM for 2012 & Proceedings of the 23rd International DAAAM Symposium: “Make Harmony between Technology and Nature, and Your Mind will Fly Free as a Bird” (p. 4). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/66533 ( reposiTUm)

Adjassoho, B., Kozeschnik, E., Lechner, C., Bleicher, F., Gössinger, S., & Bauer, C. (2012). Induction of residual stresses and increase of surface hardness by Machine Hammer Peening technology. In B. Katalinic (Ed.), Annals of DAAAM for 2012&Proceeding of the 23rd International DAAAM Symposium (pp. 697–702). Annals of DAAAM for 2012 & Proceeding of the 23rd International DAAAM Symposium/DAAAM International Vienna. http://hdl.handle.net/20.500.12708/66640 ( reposiTUm)

Zemann, R., Bleicher, F., Puschitz, F., Zisser-Pfeifer, R., & Habersohn, C. (2011). Electrochemical Micromachining of Tungsten. In B. Katalinic (Ed.), Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: “Power of Knowledge and Creativity” (pp. 0927–0928). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/66388 ( reposiTUm)

Berger, D. (2011). Development of a Discrete Simulation Model for a Light Rail Vehicle Assembly Line. In B. Katalinic (Ed.), Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: “Power of Knowledge and Creativity” (pp. 1423–1424). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/66389 ( reposiTUm)

Katalinic, B. (2011). New Engineers for the Future: Action Balanced between Intelligence, Wisdom and Ethics. In A. Covic (Ed.), 10th Losinj Days of Bioethics (pp. 39–42). http://hdl.handle.net/20.500.12708/66476 ( reposiTUm)

Katalinic, B., Cosic, I., Katic, V., & Tekic, Z. (2011). Engineers for knowledge based Society. In V. Katic (Ed.), Europe 2020: Knowledge based Society (pp. 13–21). http://hdl.handle.net/20.500.12708/66477 ( reposiTUm)

Katalinic, B. (2011). Eröffnungsvortrag - DAAAM International Network: Past - Present - Future. In B. Katalinic (Ed.), Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: “Power of Knowledge and Creativity” (pp. 55–56). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/66487 ( reposiTUm)

Katalinic, B. (2011). Welcome to 22nd DAAAM World Symposium. In B. Katalinic (Ed.), Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: “Power of Knowledge and Creativity” (pp. 3–4). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/66486 ( reposiTUm)

Katalinic, B. (2011). Development Trends in mechanical Robotics. In V. Lopota (Ed.), Mechatronics and Robotics (pp. 5–6). http://hdl.handle.net/20.500.12708/66485 ( reposiTUm)

Berger, D., & Fürbacher, R. (2011). Development of Measurement Technique for Cutting Edge Defects in Fiber Reinforced Plastics. In B. Katalinic (Ed.), Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: “Power of Knowledge and Creativity” (pp. 1421–1422). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/66386 ( reposiTUm)

Tekic, Z., Cosic, I., & Katalinic, B. (2011). Innovation and Knowledge Creation Mechanisms. In B. Katalinic (Ed.), Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: “Power of Knowledge and Creativity” (pp. 0419–0420). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/66385 ( reposiTUm)

Dimitriou, A.-A., Dorn, C., & Bleicher, F. (2011). A Holistic Approach for Energy Efficient Production Facilities. In B. Katalinic (Ed.), Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: “Power of Knowledge and Creativity” (pp. 1437–1438). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/66387 ( reposiTUm)

Bogovic, I.-N., Barisic, B., Katalinic, B., Krsulja, M., & Car, Z. (2011). Digitizing System Atos - Measuring Turbo Compressor Housing. In B. Katalinic (Ed.), Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: “Power of Knowledge and Creativity” (pp. 1367–1368). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/66380 ( reposiTUm)

Hodak, M., Barisic, B., Katalinic, B., Krsulja, M., & Car, Z. (2011). Flatness of mechanical Interface of housing filter: Comparing Methods. In B. Katalinic (Ed.), Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: “Power of Knowledge and Creativity” (pp. 1381–1382). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/66379 ( reposiTUm)

Despot, V., Barisic, B., Katalinic, B., Krsulja, M., & Car, Z. (2011). Radioscopic Measurement on Fuel Filter Support: Inspection for Health of Material. In B. Katalinic (Ed.), Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: “Power of Knowledge and Creativity” (pp. 1359–1360). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/66381 ( reposiTUm)

Jurjevic, M., Barisic, B., Katalinic, B., Krsulja, M., & Car, Z. (2011). Suitable Devices for Measuring Roughness on Oil Filter Housing. In B. Katalinic (Ed.), Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: “Power of Knowledge and Creativity” (pp. 1351–1352). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/66382 ( reposiTUm)

Kukushkin, I. K., Katalinic, B., Cesarec, P., & Kettler, R. (2011). Reconfiguration in Self-Organizing Systems. In B. Katalinic (Ed.), Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: “Power of Knowledge and Creativity” (pp. 0641–0642). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/66383 ( reposiTUm)

Gastermann, B., Stopper, M., & Katalinic, B. (2011). Apects of the Production Control System Conwip in Small and Medium Sized Industrial Companies. In B. Katalinic (Ed.), Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: “Power of Knowledge and Creativity” (pp. 0621–0622). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/66384 ( reposiTUm)

Bleicher, F., Zisser-Pfeifer, R., & Zemann, R. (2010). Electrochemical Milling. In B. Katalinic (Ed.), Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium (pp. 843–844). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/66151 ( reposiTUm)

Gastermann, B., Stopper, M., & Katalinic, B. (2010). Outline of an Autonomous Control Concept for Continuous Flow Production Using RFID and Agend-based Services. In B. Katalinic (Ed.), Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium “Intelligent Manufacturing & Automation: Focus on Interdisciplinary Solutions” (pp. 863–864). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/66171 ( reposiTUm)

Tekic, Z., Cosic, I., & Katalinic, B. (2010). Framing Knowledge in Business Context. In B. Katalinic (Ed.), Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium “Intelligent Manufacturing & Automation: Focus on Interdisciplinary Solutions” (pp. 555–556). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/66170 ( reposiTUm)

Katalinic, B. (2010). The 21st DAAAM World Symposium. In B. Katalinic (Ed.), Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium “Intelligent Manufacturing & Automation: Focus on Interdisciplinary Solutions” (pp. 3–4). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/66174 ( reposiTUm)

Katalinic, B. (2010). Engineers for knowledge based Society. In B. Katalinic (Ed.), Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium “Intelligent Manufacturing & Automation: Focus on Interdisciplinary Solutions” (pp. 1–2). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/66169 ( reposiTUm)

Kittl, B., Weiler, T., & Pfadenhauer, K. (2010). Plant Connectivity: Integration of Machine Tool Control with Manufacturing Operations Management. In B. Katalinic (Ed.), Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium (pp. 405–406). DAAAM International. http://hdl.handle.net/20.500.12708/66168 ( reposiTUm)

Radosevic, M., Katalinic, B., Cesarec, P., Stimac, S., & Barisic, B. (2010). Making Device for Torque Initiation which is applied in Torque Wrench Calibration. In B. Katalinic (Ed.), Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium “Intelligent Manufacturing & Automation: Focus on Interdisciplinary Solutions” (pp. 1521–1522). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/66172 ( reposiTUm)

Stimac, S., Katalinic, B., Cesarec, P., Radosevic, M., & Barisic, B. (2010). Measurement of the Closing Force on the Medical Bottles. In B. Katalinic (Ed.), Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium “Intelligent Manufacturing & Automation: Focus on Interdisciplinary Solutions” (pp. 1523–1524). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/66173 ( reposiTUm)

Bernreiter, J., & Bleicher, F. (2010). Hybrid Machining of SiC. In B. Katalinic (Ed.), Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium “Intelligent Manufacturing & Automation: Focus on Interdisciplinary Solutions.” DAAAM International Vienna. http://hdl.handle.net/20.500.12708/66153 ( reposiTUm)

Bleicher, F., Bernreiter, J., & Lechner, C. (2010). 3D Laser Removal - Optimization for Improving Form Errors. In B. Katalinic (Ed.), Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium “Intelligent Manufacturing & Automation: Focus on Interdisciplinary Solutions” (pp. 845–846). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/66152 ( reposiTUm)

Katalinic, B., Cesarec, P., Stopper, M., & Kettler, R. (2010). Self-Organizing Systems in Nature and Technology. In R. Kyttner (Ed.), Proceedings of the 7th International Conferencf DAAAM Baltic Indsutrial Engineering (pp. 346–351). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/66102 ( reposiTUm)

Bleicher, F., Dorn, C., & Stark, M. (2009). Performance analysis of machine tools. In B. Katalinic (Ed.), Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium “Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education” (pp. 1793–1794). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/176177 ( reposiTUm)

Kettler, R., Cesarec, P., & Katalinic, B. (2009). Cleaning of Metal Wires by using Rotating Thermal Plasma. In B. Katalinic (Ed.), Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium “Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education” (pp. 0025–0026). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/66083 ( reposiTUm)

Katalinic, B. (2009). DAAAM International Network: Background, History, Aims, Structure, Activities & Future. In B. Katalinic (Ed.), Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium “Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education” (pp. 14–48). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/66085 ( reposiTUm)

Katalinic, B. (2009). The 20th DAAAM World Symposium. In B. Katalinic (Ed.), Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium “Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education” (pp. 3–4). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/66084 ( reposiTUm)

Komenda, T. V., Feng, X., & Katalinic, B. (2009). Optimum Drive-Train Design of an Industrial Robot Family. In B. Katalinic (Ed.), Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium “Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education” (pp. 1435–1436). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/66087 ( reposiTUm)

Orsolits, H., Sirkett, D., & Katalinic, B. (2009). New Magnetic Gearbox Concept: Prototype Design and Construction. In B. Katalinic (Ed.), Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium “Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education” (pp. 0457–0458). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/66086 ( reposiTUm)

Puschitz, F., Bleicher, F., Mikats, T., & Nichol, T. (2009). NC-Controller Strategy For The Novel Machine Tool “X-Cut.” In B. Katalinic (Ed.), Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium “Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education” (pp. 1691–1692). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/65976 ( reposiTUm)

Angerer, B., Katalinic, B., & Omicini, A. (2009). A Semantic Escience Portal for International Scientific and Academic Cooperation. In B. Katalinic (Ed.), Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium “Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education” (pp. 1727–1728). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/66088 ( reposiTUm)

Bleicher, F., & Bernreiter, J. (2009). Mechatronic system for the hybrid machining of brittle hard materials. In B. Katalinic (Ed.), Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium “Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education” (pp. 1831–1832). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/65996 ( reposiTUm)

Nichol, T., Puschitz, F., & Bleicher, F. (2009). Piezoelectic Controlled Sub-Micrometer Machining Station. In B. Katalinic (Ed.), Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium “Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education” (pp. 1769–1770). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/65978 ( reposiTUm)

Lewandowski, J., & Kittl, B. (2008). IT Applications for Manufacturing Operations and Control. In B. Katalinic (Ed.), Annals of DAAAM for 2008 & Proceedings of the 19th International DAAAM Symposium “Intelligent Manufacturing & Automation: Focus on Next Generation of Intelligent Systems and Solutions” (pp. 751–752). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/65879 ( reposiTUm)

Bleicher, F., Puschitz, F., & Palatin, T. (2007). High Performance Manufacturing (HPM) a System Adapting Cutting Process. In B. Katalinic (Ed.), DAAAM International Scientific Book 2007. DAAAM International Vienna. http://hdl.handle.net/20.500.12708/65701 ( reposiTUm)

Bleicher, F., Puschitz, F., & Theiner, A. (2006). LASER BASED MEASURMENT SYSTEM FOR CALIBRATING MACHINE TOOLS IN 6 DOF. In B. Katalinic (Ed.), DAAAM International Scientific Book 2006. DAAAM International Vienna. http://hdl.handle.net/20.500.12708/65455 ( reposiTUm)

Lazinica, A., & Katalinic, B. (2005). Reconfiguration of transport mobile robot queues in Bionic Assembly System. In Annals & Proceedings of 16th DAAAM International Symposium (pp. 221–222). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/65318 ( reposiTUm)

Lazinica, A., & Katalinic, B. (2005). Design of Transport Mobile Robot Behavior in Self-Organising Assembly System. In Proceedings of 2005 IEEE/ASME International Conference on Advanced Intelligent Mechatronics - AIM 2005 (pp. 100–105). http://hdl.handle.net/20.500.12708/65320 ( reposiTUm)

Lazinica, A., & Katalinic, B. (2005). Behavior of Transport Mobile Robot in Bionic Assembly System. In Proceedings of IEEE International Conference on Mechatronics - ICM 2005 (pp. 220–225). http://hdl.handle.net/20.500.12708/65319 ( reposiTUm)

Lazinica, A., & Katalinic, B. (2005). Navigation of Transport Mobile Robot in Bionic Assembly System. In Proceedings of 4th Asian Conference on Industrial Automation and Robotics - ACIAR 2005 (pp. 27–31). http://hdl.handle.net/20.500.12708/65324 ( reposiTUm)

Lazinica, A., & Katalinic, B. (2005). Assembly Station Robot In Bionic Assembly System. In Proceedings of 13th International Conference “Industrial Systems” (pp. 273–278). http://hdl.handle.net/20.500.12708/65323 ( reposiTUm)

Majstorovic, V., & Katalinic, B. (2004). Foreward. In V. Majstorovic, B. Katalinic, V. Visekruna, & D. Covic (Eds.), Proceedings of the 3rd International Conference UPS 2004 Business Systems Management (p. 3). DAAAM International Vienna & Universtiy of Mostar. http://hdl.handle.net/20.500.12708/65212 ( reposiTUm)

VEza, I., & Katalinic, B. (2004). Preface. In B. Katalinic, I. VEza, & B. Bilic (Eds.), Proceedings of the 3rd DAAAM International Conference on Advanced Technologies for Developing Countries (p. 3). DAAAM International Vienna & University of Split. http://hdl.handle.net/20.500.12708/65210 ( reposiTUm)

Katalinic, B., & Kordic, V. (2004). Self-Organizing Assembly System. In B. Katalinic, I. VEza, & B. Bilic (Eds.), Proceedings of the 3rd DAAAM International Conference on Advanced Technologies for Developing Countries (pp. 137–145). DAAAM International Vienna & University of Split. http://hdl.handle.net/20.500.12708/65211 ( reposiTUm)

Katalinic, B., & Kordic, V. (2004). Reconfigurable Assembly Systems Based on Reactive Autonomous Robots. In V. Majstorovic, B. Katalinic, D. Covic, & V. Visekruna (Eds.), Proceedings of the 3rd International Conference UPS 2004 Business Systems Management (pp. 99–104). DAAAM International Vienna & Universtiy of Mostar. http://hdl.handle.net/20.500.12708/65213 ( reposiTUm)

Katalinic, B., Jadlovska, A., Hrubina, K., & Wessely, E. (2004). Optimal control of complex processes. In B. Katalinic (Ed.), Annals of DAAAM for 2004 & Proceedings of 15th International DAAAM Symposium (pp. 177–178). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/65191 ( reposiTUm)

Katalinic, B., & Angerer, B. (2004). “Automation transition concerning the virtual organization.” In B. Katalinic (Ed.), Annals of DAAAM for 2004 & Proceedings of 15th International DAAAM Symposium (pp. 013–014). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/65190 ( reposiTUm)

Katalinic, B., & Javorova, A. (2004). Flexible assembly workstation. In B. Katalinic (Ed.), Annals of DAAAM for 2004 & Proceedings of 15th International DAAAM Symposium (pp. 191–192). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/65192 ( reposiTUm)

Malisa, V., & Katalinic, B. (2004). Next Generation of Production Systems: Original Concept of Selforganizing Production Systems. In Eight International Conference on Manufacturing Management Proceedings (pp. 1–14). http://hdl.handle.net/20.500.12708/65203 ( reposiTUm)

Papstel, J., & Katalinic, B. (2004). Preface. In B. Katalinic & J. Papstel (Eds.), Proceedings of the 4th International Conference Industrial Engineering - New Challenges to SME (p. 4). DAAAM International Vienna & DAAAM National Estonia. http://hdl.handle.net/20.500.12708/65202 ( reposiTUm)

Katalinic, B., Kordic, V., & Cosic, I. (2004). Bionic Assembly System. In M. Stojiljkovic (Ed.), 29th Scientific-Expert Conference Proceedings (pp. 35–42). Mechanical Faculty, University of Nis. http://hdl.handle.net/20.500.12708/65161 ( reposiTUm)

Katalinic, B. (2003). DAAAM International Vienna: Background, History, Aims, Structure, Activities & Future. In B. Katalinic (Ed.), Annals of DAAAM for 2003 & Proceedings of the 14th International DAAAM Symposium (pp. 8–26). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/65152 ( reposiTUm)

Katalinic, B., & Tufekcic, D. (2003). Preface. In B. Katalinic, D. Tufekcic, & R. Selo (Eds.), Proceedings of the 2nd DAAAM International Conference on Advanced Technologies for Developing Countries (pp. 3–4). DAAAM International Vienna & University of Tuzla. http://hdl.handle.net/20.500.12708/65153 ( reposiTUm)

Ljoljic, B., Katalinic, B., Stuja, K., & Stopper, M. (2002). Evaluation of Performance of Compley Flexible Assembly System. In B. Katalinic & E. Wessely (Eds.), Proceedings of the 4th Workshop “Human Factor and Environmentalist” (pp. 63–64). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/65143 ( reposiTUm)

Kordic, V., Katalinic, B., & Ljoljic, B. (2002). Agent Based Manufacturing. In B. Katalinic & E. Wessely (Eds.), Proceedings of the 4th Workshop “Human Factor and Environmentalist” (pp. 53–54). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/65142 ( reposiTUm)

Katalinic, B., Visekruna, V., & Kordic, V. (2002). Bionic Assembly System: Design and Scheduling of Next Generation of Self Organising Complex Flexible Assembly System in CIM Environment. In K. I. Lee (Ed.), Proceeding of 35th CIRP International Seminar on Manufacturing Systems - Manufacturing Technology in the Information Age (pp. 155–162). Seoul National University. http://hdl.handle.net/20.500.12708/65145 ( reposiTUm)

Katalinic, B., & Kordic, V. (2002). Bionic Assembly Systems: Autonomous Agents in Self Organising Complex Flexible Assembly System in CIM Environment. In K. Ueda (Ed.), Proceedings of 4th International Workshop on Emergent Synthesis (pp. 3–12). Kobe University. http://hdl.handle.net/20.500.12708/65144 ( reposiTUm)

Katalinic, B. (2002). Technical Product as a Materialisation of Engineers Idea and Design Strategy of Nature. In B. Katalinic & E. Wessely (Eds.), Proceedings of the 4th Workshop “Human Factor and Environmentalist” (pp. 9–12). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/65141 ( reposiTUm)

Kordic, V., Katalinic, B., & Ljoljic, B. (2002). Toward Autonomous Agent Design Concept. In Proceedings of 3rd International Conference Industrial Engineering (pp. 100–103). http://hdl.handle.net/20.500.12708/65146 ( reposiTUm)

Ljoljic, B., Katalinic, B., Stuja, K., Kordic, V., & Stopper, M. (2002). Performance Evaluation of Flexible Assembly System for Electrical Motors. In B. Katalinic (Ed.), Proceeding of 13th DAAAM International Symposium (pp. 317–318). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/65148 ( reposiTUm)

Ljoljic, B., Katalinic, B., Stuja, K., & Kordic, V. (2002). Simulation of Flexible Assembly System for Electrical Motors. In J. Papstel (Ed.), Proceedings of 3rd International Conference: Industrial Engineering - New Challanges to SME (pp. 108–111). http://hdl.handle.net/20.500.12708/65147 ( reposiTUm)

Bodur, O., Çolak, Ü. Ö., Sterca, D.-A., Walcher, E. M., Cristian, L.-N., & Durakbasa, N. (2022). Optimization of the Crankshaft Journal Bearings Efficiency. In B. Katalinic (Ed.), DAAAM International Scientific Book 2022 (Vol. 21, pp. 97–106). https://doi.org/10.2507/daaam.scibook.2022.08 ( reposiTUm)

Demircioglu, P., Bogrekci, I., Gönülcan, S., & Durakbasa, M. N. (2021). Tensıle Test Specımen for Dıfferent Test Specımen Geometrıes. In B. Katalinic (Ed.), DAAAM International Scientific Book (pp. 107–116). DAAAM International. https://doi.org/10.2507/daaam.scibook.2021.09 ( reposiTUm)

Bodur, O., Walcher, E. M., Durakbasa, N., & Sterca, D.-A. (2021). Implementation of an Eco-Design Process to Minimize Negative Environmental Impacts - Case Study. In B. Katalinic (Ed.), DAAAM International Scientific Book (pp. 117–130). DAAAM International. https://doi.org/10.2507/daaam.scibook.2021.10 ( reposiTUm)

Bogrekci, I., Demircioglu, P., Sucuoglu, S., Altun, E., Sakar, B., & Durakbasa, N. (2020). Topology Optimization of a Tensile Test Specimen. In B. Katalinic (Ed.), DAAAM International Scientific Book (pp. 099–112). DAAAM International. https://doi.org/10.2507/daaam.scibook.2020.08 ( reposiTUm)

Bagci, H. B., Sagbas, B., & Durakbasa, N. (2020). Effect of Direct Metal Laser Sintering Process Parameters on Dimensional Accuracy of AlSi10Mg Parts. In B. Katalinic (Ed.), DAAAM International Scientific Book (pp. 171–180). DAAAM International Vienna. https://doi.org/10.2507/daaam.scibook.2020.13 ( reposiTUm)

Yurci, C., Akdogan, A., & Durakbasa, N. (2017). A Case Study – Resistance Spot Welding Distortions According to Several Welding Sequences. In B. Katalinic (Ed.), DAAAM International Scientific Book (pp. 155–172). DAAAM International. https://doi.org/10.2507/daaam.scibook.2017.13 ( reposiTUm)

Sen, K. O., Durakbasa, N., Erdol, H., Berber, T., Bas, G., & Sevik, U. (2017). Implementation of Digitalization In Food Industry. In B. Katalinic (Ed.), DAAAM International Scientific Book (pp. 091–104). DAAAM International Vienna. https://doi.org/10.2507/daaam.scibook.2017.08 ( reposiTUm)

Akhavei, F., & Kreuzer, P. (2016). An Approach to Increase the Agility in Single-Item Production Systems. In B. Katalinic (Ed.), Daaam International Scientific Book 2016 (pp. 77–92). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/29167 ( reposiTUm)

Mansour Fallah, S. (2015). Multi Agent Based Control Architectures. In B. Katalinic (Ed.), Daaam International Scientific Book 2015 (pp. 1166–1170). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/29168 ( reposiTUm)

Katalinic, B., Cesarec, P., & Kettler, R. (2009). Integration of Subordination and self Organisation in working Scenarios of Bionic Assembly System. In Concurrent Product and Technology Development (pp. 305–320). CEEPUS Network CII-HR-0108. http://hdl.handle.net/20.500.12708/26819 ( reposiTUm)

Berger, D., Bleicher, F., Dorn, C., & Puschitz, F. (2008). Optimised Machining of fibre reinforced materials. In B. Katalinic (Ed.), DAAAM International Scientific Book 2008. DAAAM International Vienna. http://hdl.handle.net/20.500.12708/26182 ( reposiTUm)

Katalinic, B., & Lazinica, A. (2005). Autonomous mobile robots in assembly applications. In DAAAM International Scientific Book 2005 (pp. 323–332). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/26023 ( reposiTUm)

Katalinic, B. (2005). Foreword. In DAAAM International Scientific Book 2005 (p. 3). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/26024 ( reposiTUm)

Stopper, M., Katalinic, B., & Stuja, K. (2005). The advanced concept for planning of flexible manufacturing system for motor gears. In DAAAM International Scientific Book 2005 (pp. 627–636). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/26025 ( reposiTUm)

Hrubina, K., Novak-Marcincin, J., Jadlovska, A., & Katalinic, B. (2005). Optimal control of complex processes and vector optimalization. In DAAAM International Scientific Book 2005 (pp. 225–252). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/26026 ( reposiTUm)

Jadlovska, A., Hrubina, K., Novak-Marcincin, J., & Katalinic, B. (2005). Algorithms for optimal decision making and processes control. In DAAAM International Scientific Book 2005 (pp. 253–290). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/26027 ( reposiTUm)

Hrubina, K., Jadlovska, A., Katalinic, B., & Wessely, E. (2004). Optimal Control Problems for Systems Solved by Algorithms of Algebraic Methods. In B. Katalinic (Ed.), DAAAM International Scientific Book 2004 (pp. 283–294). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/25993 ( reposiTUm)

Kremljak, Z., & Katalinic, B. (2004). Preface. In B. Katalinic (Ed.), Decision Making Under Risk (p. 4). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/25997 ( reposiTUm)

Stuja, K., Stopper, M., Bunjaku, A., & Bruqi, M. (2003). A Concept of Scheduling of Flexible Assembly System for Electrical Motors. In B. Katalinic (Ed.), DAAAM International Scientific Book 2003 (pp. 591–598). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/25991 ( reposiTUm)

Kordic, V., Katalinic, B., Ljoljic, B., & Stuja, K. (2002). Toward Autonomous Agent Design Concept. In DAAAM International Scientific Book 2002 (pp. 315–323). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/25988 ( reposiTUm)

Stuja, K., Katalinic, B., Ljoljic, B., & Kordic, V. (2002). Scheduling of Flexible Manufacturing Systems for Rotational Parts in a Case of Limited Production Means. In DAAAM International Scientific Book 2002 (pp. 555–564). DAAAM International. http://hdl.handle.net/20.500.12708/25990 ( reposiTUm)

Ljoljic, B., Katalinic, B., Kordic, V., & Stuja, K. (2002). Strategical Planning for a Manufacturing Company. In B. Katalinic (Ed.), DAAAM International Scientific Book 2002 (pp. 343–349). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/25989 ( reposiTUm)

Katalinic, B. (Ed.). (2011). DAAAM International Scientific Book 2011. DAAAM International Vienna. http://hdl.handle.net/20.500.12708/176071 ( reposiTUm)

Katalinic, B. (Ed.). (2010). DAAAM International Scientific Book 2010. DAAAM International Vienna. http://hdl.handle.net/20.500.12708/176072 ( reposiTUm)

Katalinic, B. (Ed.). (2009). DAAAM International Scientific Book 2009. DAAAM International Vienna. http://hdl.handle.net/20.500.12708/23114 ( reposiTUm)

Katalinic, B. (Ed.). (2005). DAAAM International Scientific Book 2005. DAAAM International Vienna. http://hdl.handle.net/20.500.12708/22679 ( reposiTUm)

Katalinic, B., & Buchmeister, B. (Eds.). (2005). International Journal of Simulation Modelling Volume 4 Number 1. DAAAM International Vienna. http://hdl.handle.net/20.500.12708/22661 ( reposiTUm)

Katalinic, B. (Ed.). (2004). International Journal of Advanced Robotic Systems Volume 1, Number 1. DAAAM International Vienna. http://hdl.handle.net/20.500.12708/22662 ( reposiTUm)

Katalinic, B. (Ed.). (2004). DAAAM International Scientific Book 2004. DAAAM International Vienna. http://hdl.handle.net/20.500.12708/22654 ( reposiTUm)

Velisek, K., & Katalinic, B. (Eds.). (2004). VÝROBNÉ SYSTÉMY I. Slovenská Technická Univerzita v Bratislave. http://hdl.handle.net/20.500.12708/22658 ( reposiTUm)

Katalinic, B. (Ed.). (2004). Decision Making under Risk. DAAAM International Vienna. http://hdl.handle.net/20.500.12708/22657 ( reposiTUm)

Katalinic, B. (Ed.). (2012). Annals of DAAAM for 2012 & Proceedings of the 23rd International DAAAM Symposium “Make Harmony between Technology and Nature, and Your Mind will Fly as a BIrd.” DAAAM International Vienna. http://hdl.handle.net/20.500.12708/23618 ( reposiTUm)

Katalinic, B. (Ed.). (2011). Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium “Intelligent Manufacturing & Automation: Power of Knowledge and Creativity.” DAAAM International Vienna. http://hdl.handle.net/20.500.12708/23353 ( reposiTUm)

Katalinic, B. (Ed.). (2010). Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium “Intelligent Manufacturing & Automation: Focus on Interdisciplinary Solutions”". DAAAM International Vienna. http://hdl.handle.net/20.500.12708/23164 ( reposiTUm)

Katalinic, B. (Ed.). (2009). Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium “Intelligent Manufacturing & Automation: Focus on Theory, practice and Education.” DAAAM International Vienna. http://hdl.handle.net/20.500.12708/23112 ( reposiTUm)

Katalinic, B. (Ed.). (2004). Annals of DAAAM for 2004 & Proceedings of the 15th International Manufacturing & Automation: Globalisation- Technology - Men - Nature. DAAAM International Vienna. http://hdl.handle.net/20.500.12708/22655 ( reposiTUm)

Papstel, J., & Katalinic, B. (Eds.). (2004). Proceedings of the 4th International Conference Industrial Engineering - New Challenges to SME. DAAAM International Vienna & DAAAM National Estonia. http://hdl.handle.net/20.500.12708/22656 ( reposiTUm)

Katalinic, B., VEza, I., & Bilic, B. (Eds.). (2004). Proceedings of the 3rd DAAAM International Conference on Advanced Technologies for Development Countries. DAAAM International Vienna & University of Split. http://hdl.handle.net/20.500.12708/22659 ( reposiTUm)

Majstorovic, V., Katalinic, B., Covic, D., & Visekruna, V. (Eds.). (2004). Proceedings of the 3rd International Conference UPS 2004 Business Systems Management. DAAAM International Vienna & Universtiy of Mostar. http://hdl.handle.net/20.500.12708/22660 ( reposiTUm)

Katalinic, B., Tufekcic, D., & Selo, R. (Eds.). (2003). Proceedings of the 2nd DAAAM Internationa Conference on Advanced Technologies for Developing Countries. DAAAM International Vienna & University of Tuzla. http://hdl.handle.net/20.500.12708/22641 ( reposiTUm)

Katalinic, B. (2011). Robotics in Education. 2nd International Conference on Robotics in Education, Wien, Austria. http://hdl.handle.net/20.500.12708/93291 ( reposiTUm)

Katalinic, B. (2003). Megatrends in the Development of Technology and their Influence on the Relation on Man-Technology-Nature. Dies Academicus - Tallinn Technical University - Doctor honoris causa speech, Tallinn Estonia, Austria. http://hdl.handle.net/20.500.12708/91753 ( reposiTUm)

Katalinic, B. (2003). Advanced Technologies for Developing Countries: Globalisation, Chances and Risks. 2nd DAAAM International Conference Advanced Technologies for Developing Countries, Tuzla, Austria. http://hdl.handle.net/20.500.12708/91754 ( reposiTUm)

Katalinic, B. (2003). Globalisation: New Possibilities and Risk Factors. 1st European-Pacific Congress on Globalisation, Vladivostok, Austria. http://hdl.handle.net/20.500.12708/91752 ( reposiTUm)

Katalinic, B. (2003). Mechatronik / Robotik: Aktuelle Stand und Entwicklungstendenzen. Science Week, Wien, Austria. http://hdl.handle.net/20.500.12708/91755 ( reposiTUm)

Katalinic, B. (2002). Intelligent Manufacturing Systems: Learning from Nature. CEEPUS Project A-104 Intelligent Manufacturing & Automation, Technical University, Cluj-Napoca, Romania, Austria. http://hdl.handle.net/20.500.12708/91600 ( reposiTUm)

Katalinic, B. (2002). Technical Product as Materialisation of Engineers Idea and Design Strategy of Nature - Plenary Session - Key Note Lecture. 12 International DAAAM Symposium, Jena, Germany,  24-27 October 2001, Jena, Austria. http://hdl.handle.net/20.500.12708/91585 ( reposiTUm)

Katalinic, B. (2002). Intelligent Manufacturing Systems: Actuale State and Developing Trends. CEEPUS Project A-104 Intelligent Manufacturing & Automation, Technical University, Cluj-Napoca, Romania, Austria. http://hdl.handle.net/20.500.12708/91598 ( reposiTUm)

Katalinic, B. (2002). Advanced Topics in History and Trends of Technology. CEEPUS Project A-104 Intelligent Manufacturing & Automation, Technical University, Cluj-Napoca, Romania, Austria. http://hdl.handle.net/20.500.12708/91596 ( reposiTUm)

Katalinic, B. (2002). Intelligent Manufacturing and Automation. CEEPUS Project A-104 Intelligent Manufacturing & Automation, Technical University, Cluj-Napoca, Romania, Austria. http://hdl.handle.net/20.500.12708/91599 ( reposiTUm)

Katalinic, B. (2002). Intelligent Manufacturing Systems. CEEPUS Project A-104 Intelligent Manufacturing & Automation, Technical University, Cluj-Napoca, Romania, Austria. http://hdl.handle.net/20.500.12708/91597 ( reposiTUm)

Katalinic, B. (2002). Applied Robotics. CEEPUS Project A-104 Intelligent Manufacturing & Automation, Technical University, Cluj-Napoca, Romania, Austria. http://hdl.handle.net/20.500.12708/91595 ( reposiTUm)

Katalinic, B. (2002). International Scientific and Academic Cooperation in the Framework of DAAAM International: Past - Present - Future, Plenary Section - Key Note Lecture. 13th International DAAAM Symposium “Intelligent Manufacturing & Automation: Learning from Nature,” Vienna, Austria, Austria. http://hdl.handle.net/20.500.12708/91593 ( reposiTUm)

Katalinic, B. (2002). Modelling Simulation and Calcualtion of Industrial Robots. CEEPUS Project A-104 Intelligent Manufacturing & Automation, Technical University, Cluj-Napoca, Romania, Austria. http://hdl.handle.net/20.500.12708/91594 ( reposiTUm)

Katalinic, B. (2002). Bionic Assembly Systems. CEEPUS Project A-104 Intelligent Manufacturing & Automation, Technical University, Cluj-Napoca, Romania, Austria. http://hdl.handle.net/20.500.12708/91603 ( reposiTUm)

Katalinic, B. (2002). Intelligent Automation in the Manufacturing. CEEPUS Project A-104 Intelligent Manufacturing & Automation, Technical University, Cluj-Napoca, Romania, Austria. http://hdl.handle.net/20.500.12708/91601 ( reposiTUm)

Katalinic, B. (2002). Intelligent Manufacturing Systems. CEEPUS Project A-104 Intelligent Manufacturing & Automation, Technical University, Cluj-Napoca, Romania, Austria. http://hdl.handle.net/20.500.12708/91602 ( reposiTUm)