Wissenschaftliche Artikel

Fitzka, M., Simon, Z., Marischler, M., Koch, T., Klitni, V., Fröhlich, A., Plengorth, A., Girolamo, D., Rohr, T., Scheerer, M., Liska, R., & Knaack, P. (2026). Rapid, Energy-Efficient CFRP manufacturing via filament winding of frontal polymerization resins. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 203, Article 109577. https://doi.org/10.1016/j.compositesa.2026.109577 ( reposiTUm)

Pieringer, F., Catel, Y., Liska, R., & Knaack, P. (2025). Insights into the bulk kinetics of a 2K radical polymerization system based on the copper catalyzed cleavage of diboranes and its perspectives. Polymer Chemistry. https://doi.org/10.1039/D4PY01102C ( reposiTUm)

Ahmadi, M., Ehrmann, K., Göschl, M., Schlossgangl, P., Koch, T., Liska, R., & Stampfl, J. (2025). Photopolymerization‐induced phase separation in (meth)acrylate‐based photopolymers from a characterization point of view. Journal of Applied Polymer Science, Article e57404. https://doi.org/10.1002/app.57404 ( reposiTUm)

Fantoni, A., Salvadori, A., Ovsianikov, A., Liska, R., & Baudis, S. (2025). Highlighting the Influence between Physical and Chemical Cross-Linking in Dynamic Hydrogels for Two-Photon Micropatterning. Biomacromolecules, 26(7), 4084–4094. https://doi.org/10.1021/acs.biomac.5c00062 ( reposiTUm)

Ableidinger, K., Laa, D., Chalupa-Gantner, F., Gjata, E., Knaack, P., Ovsianikov, A., Stampfl, J., Slugovc, C., & Liska, R. (2025). Investigation of Lewis photobase-catalysed oxa-Michael addition for hot lithography. MATERIALS HORIZONS. https://doi.org/10.1039/d5mh01050k ( reposiTUm)

Fantoni, A., Krauß, J., Ammann, T., Melchior, P., Nees, D., Frauenlob, M., Liska, R., & Baudis, S. (2025). Bridging the gap between performance and biocompatibility: non-toxic, multifunctional aliphatic photoinitiators based on α-ketoesters for lithography-based manufacturing applications. Materials Advances. https://doi.org/10.1039/D5MA00926J ( reposiTUm)

Gurmann, T., Krauß, J., Ammann, T., Koch, T., Frauenlob, M., Liska, R., & Baudis, S. (2025). Cleavable silyl ether monomers with elevated thermomechanical properties for bone regeneration. ACS Applied Bio Materials, 8(11), 9840–9853. https://doi.org/10.1021/acsabm.5c01174 ( reposiTUm)

Helfert, S., Zandrini, T., Rohatschek, A., Rufin, M., Machata, P., Zahoranová, A., Andriotis, O., Thurner, P., Ovsianikov, A., Liska, R., & Baudis, S. (2025). Micropatterning of confined surfaces with polymer brushes by two-photon-initiated reversible addition–fragmentation chain-transfer polymerization. Small Science, 5(1), Article 2400263. https://doi.org/10.1002/smsc.202400263 ( reposiTUm)

Musil, V., Laa, D., Ahmadi, M., Stampfl, J., Liska, R., Merna, J., & Ehrmann, K. (2025). Thermoplastic-like mechanical performance of heterogeneous photopolymers for additive manufacturing with tailored hyperbranched rubbers. RSC Applied Polymers, 3(5), 1165–1176. https://doi.org/10.1039/D5LP00138B ( reposiTUm)

Mayer, F., Laa, D., Koch, T., Stampfl, J., Liska, R., & Ehrmann, K. (2025). Trioxanes as photodegradable motifs for additive manufacturing. Polymer Chemistry, 16(32), 3597–3607. https://doi.org/10.1039/D5PY00545K ( reposiTUm)

Musil, V., Laa, D., Sokolohorskyj, A., Liska, R., Ehrmann, K., & Merna, J. (2025). Epoxide-functionalized hyperbranched polyethylene and its applications in functional polymer synthesis and hot lithography photopolymer toughening. REACTIVE & FUNCTIONAL POLYMERS, 216, Article 106425. https://doi.org/10.1016/j.reactfunctpolym.2025.106425 ( reposiTUm)

Gjata, E., Ableidinger, K., Liska, R., & Knaack, P. (2025). Photoinduced liberation of a phosphazene superbase as an initiator for oxa-Michael addition reactions. MONATSHEFTE FUR CHEMIE. https://doi.org/10.1007/s00706-025-03378-6 ( reposiTUm)

Bassenheim, D., Knaipp, K., Schmallegger, M., Gescheidt, G., Rist, K., Moszner, N., Catel, Y., Liska, R., & Knaack, P. (2025). Substituent Effects in Monoacylphosphine Oxide Photoinitiators: Efficiency and Performance. Journal of Polymer Science, 63(10), 2167–2173. https://doi.org/10.1002/pol.20250212 ( reposiTUm)

Raffael Wolff, Robert Liska, & Patrick Knaack. (2024). Photo‐induced catalytic poly‐trimerization of polyisocyanurates. Journal of Polymer Science. https://doi.org/10.1002/pol.20230884 ( reposiTUm)

Bogdanovic, D., Wolff, R., Mete, Y. D., Koch, T., Stampfl, J., Baudis, S., Ehrmann, K., & Liska, R. (2024). 3D printable aliphatic polycarbonate networks from cationic ring-opening photopolymerization of spiro-orthocarbonates. European Polymer Journal, 208, Article 112876. https://doi.org/10.1016/j.eurpolymj.2024.112876 ( reposiTUm)

Elgoyhen, J., Le, C. M. Q., Ricke, A., Liska, R., Baudis, S., Chemtob, abraham, & Tomovska, R. (2024). Implementing miniemulsion photopolymerization for synthesis of waterborne biobased poly(thioethers) coatings. Progress in Organic Coatings, 187, Article 108156. https://doi.org/10.1016/j.porgcoat.2023.108156 ( reposiTUm)

Ahmadi, M., Ehrmann, K., Koch, T., Liska, R., & Stampfl, J. (2024). From Unregulated Networks to Designed Microstructures: Introducing Heterogeneity at Different Length Scales in Photopolymers for Additive Manufacturing. Chemical Reviews, 124(7), 3978–4020. https://doi.org/10.1021/acs.chemrev.3c00570 ( reposiTUm)

Bassenheim, D., Mitterbauer, M., Liska, R., & Knaack, P. (2024). Novel thermal initiator systems for radical induced cationic frontal polymerization. Polymer Chemistry, 15, 2229–2234. https://doi.org/10.1039/D4PY00343H ( reposiTUm)

Pieringer, F., Knaipp, K., Liska, R., Moszner, N., Catel, Y., Gescheidt, G., & Knaack, P. (2024). Boron–boron bonds: boldly breaking boundaries towards amine- and peroxide-free 2K radical polymerization. Polymer Chemistry, 15(31), 3127–3138. https://doi.org/10.1039/D4PY00445K ( reposiTUm)

Ajami, A., Ovsianikov, A., Liska, R., & Baudis, S. (2024). Z-scan technique: a review from conventional Z-scan to white light Z-scan. APPLIED PHYSICS B-LASERS AND OPTICS, 130, Article 138. https://doi.org/10.1007/s00340-024-08262-5 ( reposiTUm)

Ricke, A., Berk, O., Koch, T., Liska, R., & Baudis, S. (2024). Cyclic acetals as expanding monomers to reduce shrinkage. Angewandte Chemie, Article e202414938. https://doi.org/10.34726/6999 ( reposiTUm)

Fantoni, A., Koch, T., Liska, R., & Baudis, S. (2024). A Systematic Study on Biobased Epoxy-Alcohol Networks: Highlighting the Advantage of Step-Growth Polyaddition over Chain-Growth Cationic Photopolymerization. Macromolecular Rapid Communications, e2400323. https://doi.org/10.1002/marc.202400323 ( reposiTUm)

Schwarzl, P., Koch, T., Liska, R., & Baudis, S. (2024). Macromolecular metamorphosis of thermoplastic poly(thio)urethanes containing boronic acid esters. Journal of Applied Polymer Science. https://doi.org/10.1002/app.56429 ( reposiTUm)

Mayer, F., Laa, D., Koch, T., Stampfl, J., Liska, R., & Ehrmann, K. (2024). Rapid 3D printing of unlayered, tough epoxy-alcohol resins with late gel points via dual-color curing technology. MATERIALS HORIZONS. https://doi.org/10.1039/d4mh01261e ( reposiTUm)

Pezzana, L., Wolff, R., Stampfl, J., Liska, R., & Sangermano, M. (2024). High temperature vat photopolymerization 3D printing of fully bio-based composites: Green vegetable oil epoxy matrix & bio-derived filler powder. Additive Manufacturing, 79, Article 103929. https://doi.org/10.1016/j.addma.2023.103929 ( reposiTUm)

Specht, S. J., Rohringer, S., Hager, P., Grasl, C., Schmitt, A., Pach, V. J. C., Ehrmann, K., Baudis, S., Liska, R., Kiss, H., Schneider, K. H., Podesser, B. K., & Bergmeister, H. (2024). Decellularized Extracellular Matrix and Polyurethane Vascular Grafts Have Positive Effects on the Inflammatory and Pro‐Thrombotic State of Aged Endothelial Cells. Journal of Biomedical Materials Research Part A. https://doi.org/10.1002/jbm.a.37830 ( reposiTUm)

Bassenheim, D., Rist, K., Moszner, N., Catel, Y., Liska, R., & Knaack, P. (2024). Color-Stable Formulations for 3D-Photoprintable Dental Materials. Polymers, 16(16), Article 2323. https://doi.org/10.3390/polym16162323 ( reposiTUm)

Ecker, J., Liska, R., & Stampfl, J. (2024). Design for disassembly: Using a multi-material approach in 3D printing for easier recycling strategies. Additive Manufacturing, 92, 1–13. https://doi.org/10.1016/j.addma.2024.104394 ( reposiTUm)

Kojic, D., Ehrmann, K., Wolff, R., Mete, Y., Koch, T., Stampfl, J., Baudis, S., & Liska, R. (2023). Stereolithographic 3D printing of pure poly(ether–ester) networks from spirocyclic monomers via cationic ring-opening photopolymerization at high temperatures. Polymer Chemistry, 14(42), 4809–4818. https://doi.org/10.1039/D3PY00787A ( reposiTUm)

Sinawehl, L., Wolff, R., Koch, T., Stampfl, J., Liska, R., & Baudis, S. (2023). Photopolymers based on boronic esters for the enhanced degradation of 3D-printed scaffolds. ACS Applied Polymer Materials, 5(7), 5758–5771. https://doi.org/10.1021/acsapm.3c01000 ( reposiTUm)

Ruppitsch, L. A., Ecker, J., Koch, T., Ehrmann, K., Stampfl, J., & Liska, R. (2023). Dynamic monomers for hot lithography: the UPy motif as a versatile tool towards stress relaxation, reprocessability, and 3D printing. Journal of Polymer Science, 61(13), 1318–1334. https://doi.org/10.1002/pol.20220721 ( reposiTUm)

Wolff, R., Knaack, P., Seidler, K., Gorsche, C., Koch, T., Stampfl, J., & Liska, R. (2023). Additive manufacturing of high-performance polycyanurates via photo-induced catalytic poly-trimerization. Journal of Materials Chemistry A, 11(20), 10545–10550. https://doi.org/10.1039/D3TA01264F ( reposiTUm)

Fantoni, A., Koch, T., Baudis, S., & Liska, R. (2023). Synthesis and Characterization of Homogeneous Epoxy Networks: Development of a Sustainable Material Platform Using Epoxy-Alcohol Polyaddition. ACS Applied Polymer Materials, 5(1), 731–742. https://doi.org/10.1021/acsapm.2c01728 ( reposiTUm)

Schandl, S., Koch, T., Stampfl, J., Ehrmann, K., & Liska, R. (2023). Pure aliphatic polycarbonate networks via photoinduced anionic ring-opening polymerization at elevated temperature. Reactive and Functional Polymers, 182, Article 105460. https://doi.org/10.1016/j.reactfunctpolym.2022.105460 ( reposiTUm)

Fantoni, A., Ecker, J., Ahmadi, M., Koch, T., Stampfl, J., Liska, R., & Baudis, S. (2023). Green monomers for 3D printing: epoxy-methacrylate interpenetrating polymer networks as a versatile alternative for toughness enhancement in additive manufacturing. ACS SUSTAINABLE CHEMISTRY & ENGINEERING, 11(32), 12004–12013. https://doi.org/10.1021/acssuschemeng.3c02194 ( reposiTUm)

Taschner, R., Koch, T., Wolff, R., Stampfl, J., Liska, R., & Knaack, P. (2023). Evaluation of sulfonium borate initiators for cationic photopolymerization and their application in hot lithography. ACS Applied Polymer Materials, 5(4), 3023–3033. https://doi.org/10.1021/acsapm.3c00191 ( reposiTUm)

Zain, G., Ruppitsch, L. A., Koch, T., Svajdlenkova, H., Liska, R., & Mosnáček, J. (2023). Investigation of polymer networks for dental fillings formed by photochemically induced atom transfer radical polymerization of bifunctional methacrylates. ACS Applied Polymer Materials, 5(12), 10158–10169. https://doi.org/10.1021/acsapm.3c01973 ( reposiTUm)

Pieringer, F., Catel, Y., Liska, R., Moszner, N., & Knaack, P. (2023). Group transfer polymerization in bulk methacrylates. Journal of Polymer Science, 61(22), 2922–2931. https://doi.org/10.1002/pol.20230132 ( reposiTUm)

Hobiger, V., Kutsch, A.-L., Stampfl, J., Liska, R., Baudis, S., & Krajnc, P. (2023). Thiol-Acrylate polyHIPEs via Facile Layer-by-Layer Photopolymerization. 3D Printing and Additive Manufacturing. https://doi.org/10.1089/3dp.2022.0289 ( reposiTUm)

Staubmann, L., Mistlberger-Reiner, A., Raoui, E. M., Brunner, G., Sinawehl, L., Winter, M., Liska, R., & Pignitter, M. (2023). Combinations of hydrocolloids show enhanced stabilizing effects on cloudy orange juice ready-to-drink beverages. Food Hydrocolloids, 138, Article 108436. https://doi.org/10.1016/j.foodhyd.2022.108436 ( reposiTUm)

Rohringer, S., Grasl, C., Ehrmann, K., Hager, P., Hahn, C., Specht, S. J., Walter, I., Schneider, K. H., Zopf, L. M., Baudis, S., Liska, R., Schima, H., Podesser, B., & Bergmeister, H. (2023). Biodegradable, Self-Reinforcing Vascular Grafts for In Situ Tissue Engineering Approaches. Advanced Healthcare Materials, Article 2300520. https://doi.org/10.1002/adhm.202300520 ( reposiTUm)

Dellago, B., Altun, A. A., Liska, R., & Baudis, S. (2022). Exploring the limits of toughness enhancers for 3D printed photopolymers as bone replacement materials. Journal of Polymer Science. https://doi.org/10.1002/pol.20220378 ( reposiTUm)

Wolff, R., Ehrmann, K., Knaack, P., Seidler, K., Gorsche, C., Koch, T., Stampfl, J., & Liska, R. (2022). Photo-chemically induced polycondensation of a pure phenolic resin for additive manufacturing. Polymer Chemistry, 13(6), 768–777. https://doi.org/10.1039/D1PY01665B ( reposiTUm)

Kury, M., Ehrmann, K., Gorsche, C., Dorfinger, P., Koch, T., Stampfl, J., & Liska, R. (2022). Regulated acrylate networks as tough photocurable materials for additive manufacturing. Polymer International, 71(7), 897–905. https://doi.org/10.34726/3441 ( reposiTUm)

Taschner, R., Liska, R., & Knaack, P. (2022). Iodonium Borate Initiators for Cationic Photopolymerization and Their Application in Radical-Induced Cationic Frontal Polymerization. ACS Applied Polymer Materials, 4(10), 7878–7890. https://doi.org/10.1021/acsapm.2c01465 ( reposiTUm)

Lunzer, M., Beckwith, J. S., Chalupa-Gantner, F., Rosspeintner, A., Licari, G., Steiger, W., Hametner, C., Liska, R., Fröhlich, J., Vauthey, E., Ovsianikov, A., & Holzer, B. (2022). Beyond the Threshold: A Study of Chalcogenophene-Based Two-Photon Initiators. Chemistry of Materials, 34(7), 3042–3052. https://doi.org/10.1021/acs.chemmater.1c04002 ( reposiTUm)

Steinbauer, P., Liska, R., & Baudis, S. (2022). Approaching new biomaterials: copolymerization characteristics of vinyl esters with norbornenes, allyl esters and allyl ethers. Polymer International, 1–7. https://doi.org/10.1002/pi.6313 ( reposiTUm)

Mete, Y., Seidler, K., Gorsche, C., Koch, T., Knaack, P., & Liska, R. (2022). Cationic photopolymerization of cyclic esters at elevated temperatures and their application in hot lithography. Polymer International, 71(9), 1062–1071. https://doi.org/10.1002/pi.6430 ( reposiTUm)

Mete, Y. D., Knaack, P., & Liska, R. (2022). A systematic study of temperature-dependent cationic photopolymerization of cyclic esters. Polymer International, 71(7), 797–803. https://doi.org/10.1002/pi.6326 ( reposiTUm)

Taschner, R., Liska, R., & Knaack, P. (2022). Evaluation of suitable onium tetrafluoroborates for cationic polymerization of epoxides. Polymer International, 71(7), 804–816. https://doi.org/10.1002/pi.6330 ( reposiTUm)

Grob, B., Frieser, B., Liska, R., & Catel, Y. (2022). Evaluation of allyl sulfides bearing methacrylate groups as addition-fragmentation chain transfer agents for low shrinkage dental composites. European Polymer Journal, 181, Article 111699. https://doi.org/10.1016/j.eurpolymj.2022.111699 ( reposiTUm)

Lunzer, M., Maryasin, B., Zandrini, T., Baudis, S., Ovsianikov, A., & Liska, R. (2022). A disulfide-based linker for thiol-norbornene conjugation: formation and cleavage of hydrogels by the use of light. Polymer Chemistry, 13(9), 1158–1168. https://doi.org/10.1039/d1py00914a ( reposiTUm)

Dietliker, K., Liska, R., & Sangermano, M. (2022). Introduction to the themed collection on photopolymer science dedicated to Ewa Andrezejewska. Polymer Chemistry, 13(9), 1151–1151. https://doi.org/10.1039/D2PY90020C ( reposiTUm)

Pezzana, L., Wolff, R., Melilli, G., Guigo, N., SBIRRAZZUOLI, N., Stampfl, J., Liska, R., & Sangermano, M. (2022). Hot-lithography 3D printing of biobased epoxy resins. Polymer, 254, 125097. https://doi.org/10.1016/j.polymer.2022.125097 ( reposiTUm)

Steindl, J., Ehrmann, K., Gorsche, C., Huang, C.-C., Koch, T., Steinbauer, P., Rohatschek, A., Andriotis, O. G., Thurner, P. J., Prado‐Roller, A., Stampfl, J., & Liska, R. (2022). Maleimide‐styrene‐butadiene terpolymers: acrylonitrile‐butadiene‐styrene inspired photopolymers for additive manufacturing. Polymer International, 71(7), 856–866. https://doi.org/10.1002/pi.6351 ( reposiTUm)

Haslinger, C., Leutgeb, L. P., Haas, M., Baudis, S., & Liska, R. (2022). Synthesis and Photochemical Investigation of Tetraacylgermanes. ChemPhotoChem. https://doi.org/10.1002/cptc.202200108 ( reposiTUm)

Gallas, K., Wohlmuth, D., Li, Z., Ajami, A., Ovsianikov, A., Liska, R., & Slugovc, C. (2022). Dye-labeled aromatic azides for multi-photon grafting. Monatshefte Für Chemie - Chemical Monthly. https://doi.org/10.1007/s00706-022-03022-7 ( reposiTUm)

Ruppitsch, L. A., Peer, G., Ehrmann, K., Koch, T., & Liska, R. (2021). Photopolymerization of difunctional cyclopolymerizable monomers with low shrinkage behavior. Journal of Polymer Science, 59(6), 519–531. https://doi.org/10.1002/pol.20200863 ( reposiTUm)

Grunenberg, D., Ehrmann, K., Gorsche, C., Steyrer, B., Koch, T., Stampfl, J., & Liska, R. (2021). Heterotelechelic poly(propylene oxide) as migration-inhibited toughening agent in hot lithography based additive manufacturing. Polymer Chemistry, 12(9), 1260–1272. https://doi.org/10.1039/d0py01746a ( reposiTUm)

Tran, A. D., Koch, T., Liska, R., & Knaack, P. (2021). Radical-induced cationic frontal polymerisation for prepreg technology. Monatshefte Für Chemie - Chemical Monthly, 152(1), 151–165. https://doi.org/10.1007/s00706-020-02726-y ( reposiTUm)

Taschner, R., Knaack, P., & Liska, R. (2021). Bismuthonium- and pyrylium-based radical induced cationic frontal polymerization of epoxides. Journal of Polymer Science, Part A: Polymer Chemistry, 59(16), 1841–1854. https://doi.org/10.1002/pol.20210196 ( reposiTUm)

Heinze, M., Horn, C., Pospiech, D., Boldt, R., Kobsch, O., Eckstein, K., Jehnichen, D., Voit, B., Baudis, S., Liska, R., Naumova, A., Saalwächter, K., Lendenmann, U., & Moszner, N. (2021). Polymer Networks for Enrichment of Calcium Ions. Polymers, 13(20), 3506. https://doi.org/10.3390/polym13203506 ( reposiTUm)

Kury, M., Ehrmann, K., Harakály, G. A., Gorsche, C., & Liska, R. (2021). Low volatile monofunctional reactive diluents for radiation curable formulations. Journal of Polymer Science, Part A: Polymer Chemistry, 59(19), 2154–2169. https://doi.org/10.1002/pol.20210171 ( reposiTUm)

Lamparth, I., Wottawa, D., Angermann, J., Fässler, P., Liska, R., & Catel, Y. (2021). Synthesis of allyl sulfones bearing urethane groups as efficient addition-fragmentation chain transfer agents for the development of low-shrinkage composites. European Polymer Journal, 158(110672), 110672. https://doi.org/10.1016/j.eurpolymj.2021.110672 ( reposiTUm)

Dellago, B., Ricke, A., Geyer, T., Liska, R., & Baudis, S. (2021). Photopolymerizable precursors for degradable biomaterials based on acetal moieties. European Polymer Journal, 154, Article 110536. https://doi.org/10.1016/j.eurpolymj.2021.110536 ( reposiTUm)

Steinbauer, P., Rohatschek, A., Andriotis, O., Bouropoulos, N., Liska, R., Thurner, P. J., & Baudis, S. (2021). Biomimetic adhesion motifs based on RAFT polymers with phosphonate groups. European Polymer Journal, 143, Article 110188. https://doi.org/10.1016/j.eurpolymj.2020.110188 ( reposiTUm)

Hobiger, V., Zahoranova, A., Baudis, S., Liska, R., & Krajnc, P. (2021). Thiol-Ene Cross-linking of Poly(ethylene glycol) within High Internal Phase Emulsions: Degradable Hydrophilic PolyHIPEs for Controlled Drug Release. Macromolecules, 54(22), 10370–10380. https://doi.org/10.1021/acs.macromol.1c01240 ( reposiTUm)

Aramesh, M., Mergenthal, S., Issler, M., Plochberger, B., Weber, F., Qin, X.-H., Liska, R., Duda, G. N., Huppa, J. B., Ries, J., Schütz, G. J., & Klotzsch, E. (2020). Functionalized Bead Assay to Measure Three-dimensional Traction Forces during T‑cell Activation. Nano Letters, 21(1), 507–514. https://doi.org/10.1021/acs.nanolett.0c03964 ( reposiTUm)

Peer, G., Kury, M., Gorsche, C., Catel, Y., Frühwirt, P., Gescheidt, G., Moszner, N., & Liska, R. (2020). Revival of Cyclopolymerizable Monomers as Low-Shrinkage Cross-Linkers. Macromolecules, 53(19), 8374–8381. https://doi.org/10.1021/acs.macromol.0c01551 ( reposiTUm)

Hofecker, A., Knaack, P., Steinbauer, P., Markovic, M., Ovsianikov, A., & Liska, R. (2020). Novel synthesis routes for the preparation of low toxic vinyl ester and vinyl carbonate monomers. Synthetic Communications, 50(23), 3629–3641. https://doi.org/10.1080/00397911.2020.1808995 ( reposiTUm)

Prina, E., Amer, M. H., Sidney, L., Tromayer, M., Moore, J., Liska, R., Bertolin, M., Ferrari, S., Hopkinson, A., Dua, H., Yang, J., Wildman, R., & Rose, F. R. A. J. (2020). Bioinspired Precision Engineering of Three‐Dimensional Epithelial Stem Cell Microniches. ADVANCED BIOSYSTEMS, 4(6), 2000016. https://doi.org/10.1002/adbi.202000016 ( reposiTUm)

Taschner, R., Gauss, P., Knaack, P., & Liska, R. (2020). Biocompatible photoinitiators based on poly‐α‐ketoesters. Journal of Polymer Science, 58(2), 242–253. https://doi.org/10.1002/pol.20199929 ( reposiTUm)

Tran, A. D., Koch, T., Knaack, P., & Liska, R. (2020). Radical induced cationic frontal polymerization for preparation of epoxy composites. Composites Part A: Applied Science and Manufacturing, 132(105855), 105855. https://doi.org/10.1016/j.compositesa.2020.105855 ( reposiTUm)

Dereka, B., Svechkarev, D., Rosspeintner, A., Aster, A., Lunzer, M., Liska, R., Mohs, A. M., & Vauthey, E. (2020). Solvent tuning of photochemistry upon excited-state symmetry breaking. Nature Communications, 11(1925). https://doi.org/10.1038/s41467-020-15681-3 ( reposiTUm)

Enayati, M., Puchhammer, S., Iturri, J., Grasl, C., Kaun, C., Baudis, S., Walter, I., Schima, H., Liska, R., Wojta, J., Toca-Herrera, J. L., Podesser, B. K., & Bergmeister, H. (2020). Assessment of a long-term in vitro model to characterize the mechanical behavior and macrophage-mediated degradation of a novel, degradable, electrospun poly-urethane vascular graft. Journal of the Mechanical Behavior of Biomedical Materials, 112(104077), 104077. https://doi.org/10.1016/j.jmbbm.2020.104077 ( reposiTUm)

Zerobin, E., Markovic, M., Tomášiková, Z., Qin, X.-H., Ret, D., Steinbauer, P., Kitzmüller, J., Steiger, W., Gruber, P., Ovsianikov, A., Liska, R., & Baudis, S. (2020). Hyaluronic acid vinyl esters: A toolbox toward controlling mechanical properties of hydrogels for 3D microfabrication. Journal of Polymer Science, 58(9), 1288–1298. https://doi.org/10.1002/pol.20200073 ( reposiTUm)

Dall’Argine, C., Hochwallner, A., Klikovits, N., Liska, R., Stampf, J., & Sangermano, M. (2020). Hot‐Lithography SLA‐3D Printing of Epoxy Resin. Macromolecular Materials and Engineering, 305(10), 2000325. https://doi.org/10.1002/mame.202000325 ( reposiTUm)

Klikovits, N., Sinawehl, L., Knaack, P., Koch, T., Stampfl, J., Gorsche, C., & Liska, R. (2020). UV-Induced Cationic Ring-Opening Polymerization of 2-Oxazolines for Hot Lithography. ACS Macro Letters, 9(4), 546–551. https://doi.org/10.1021/acsmacrolett.0c00055 ( reposiTUm)

Ehrmann, K., Potzmann, P., Dworak, C. L., Bergmeister, H., Eilenberg, M., Grasl, C., Koch, T., Schima, H., Liska, R., & Baudis, S. (2020). Hard Block Degradable Polycarbonate Urethanes: Promising Biomaterials for Electrospun Vascular Prostheses. Biomacromolecules, 21(2), 376–387. https://doi.org/10.1021/acs.biomac.9b01255 ( reposiTUm)

Steinbauer, P., Rohatschek, A., Andriotis, O., Bouropoulos, N., Liska, R., Thurner, P. J., & Baudis, S. (2020). Single-Molecule Force Spectroscopy Reveals Adhesion-by-Demand in Statherin at the Protein-Hydroxyapatite Interface. Langmuir, 36(44), 13292–13300. https://doi.org/10.1021/acs.langmuir.0c02325 ( reposiTUm)

Holzer, B., Lunzer, M., Rosspeintner, A., Licari, G., Tromayer, M., Naumov, S., Lumpi, D., Horkel, E., Hametner, C., Ovsianikov, A., Liska, R., Vauthey, E., & Fröhlich, J. (2019). Towards efficient initiators for two-photon induced polymerization: fine tuning of the donor/acceptor properties. Molecular Systems Design & Engineering, 4(2), 437–448. https://doi.org/10.1039/c8me00101d ( reposiTUm)

Peer, G., Eibel, A., Gorsche, C., Catel, Y., Gescheidt, G., Moszner, N., & Liska, R. (2019). Ester-Activated Vinyl Ethers as Chain Transfer Agents in Radical Photopolymerization of Methacrylates. Macromolecules, 52(7), 2691–2700. https://doi.org/10.1021/acs.macromol.9b00085 ( reposiTUm)

Sari, E., Mitterbauer, M., Liska, R., & Yagci, Y. (2019). Visible light induced free radical promoted cationic polymerization using acylsilanes. Progress in Organic Coatings, 132, 139–143. https://doi.org/10.1016/j.porgcoat.2019.02.045 ( reposiTUm)

Mikl, G., Obmann, R., Schörpf, S., Liska, R., & Konegger, T. (2019). Pore Morphology Tailoring in Polymer-derived Ceramics generated through Photopolymerization-assisted Solidification Templating. Advanced Engineering Materials, 21(6), 1900052. https://doi.org/10.1002/adem.201900052 ( reposiTUm)

Schoerpf, S., Catel, Y., Moszner, N., Gorsche, C., & Liska, R. (2019). Enhanced reduction of polymerization-induced shrinkage stress via combination of radical ring opening and addition fragmentation chain transfer. Polymer Chemistry, 10(11), 1357–1366. https://doi.org/10.1039/c8py01540f ( reposiTUm)

Qiu, W., Hu, P., Zhu, J., Liu, R., Zhiquan, L., Hu, Z., Chen, Q., Dietliker, K., & Liska, R. (2019). Cleavable Unimolecular Photoinitiators Based on Oxime‐Ester Chemistry for Two‐Photon Three‐Dimensional Printing. ChemPhotoChem, 3(11), 1090–1094. https://doi.org/10.1002/cptc.201900164 ( reposiTUm)

Gauss, P., Griesser, M., Markovic, M., Ovsianikov, A., Gescheidt, G., Knaack, P., & Liska, R. (2019). α-Ketoesters as Nonaromatic Photoinitiators for Radical Polymerization of (Meth)acrylates. Macromolecules, 52(7), 2814–2821. https://doi.org/10.1021/acs.macromol.8b02640 ( reposiTUm)

Knaack, P., Klikovits, N., Tran, A. D., Bomze, D., & Liska, R. (2019). Radical induced cationic frontal polymerization in thin layers. Journal of Polymer Science, Part A: Polymer Chemistry, 57(11), 1155–1159. https://doi.org/10.1002/pola.29375 ( reposiTUm)

Obmann, R., Schörpf, S., Gorsche, C., Liska, R., Fey, T., & Konegger, T. (2019). Porous polysilazane-derived ceramic structures generated through photopolymerization-assisted solidification templating. Journal of the European Ceramic Society, 39(4), 838–845. https://doi.org/10.1016/j.jeurceramsoc.2018.11.045 ( reposiTUm)

Sticker, D., Rothbauer, M., Ehgartner, J., Steininger, C., Liske, O., Liska, R., Neuhaus, W., Mayr, T., Haraldsson, T., Kutter, J., & Ertl, P. (2019). Oxygen Management at the Microscale: A Functional Biochip Material with Long-Lasting and Tunable Oxygen Scavenging Properties for Cell Culture Applications. ACS Applied Materials and Interfaces, 11(10), 9730–9739. https://doi.org/10.1021/acsami.8b19641 ( reposiTUm)

Seidler, K., Griesser, M., Kury, M., Reghunathan, H., Dorfinger, P., Koch, T., Svirkova, A., Marchetti-Deschmann, M., Stampfl, J., Moszner, N., Gorsche, C., & Liska, R. (2018). Vinyl Sulfonate Esters: Efficient Chain Transfer Agents for the 3D Printing of Tough Photopolymers without Retardation. Angewandte Chemie International Edition, 57(29), 9165–9169. https://doi.org/10.1002/anie.201803747 ( reposiTUm)

Sangermano, M., D’Anna, A., Marro, C., Klikovits, N., & Liska, R. (2018). UV-activated frontal polymerization of glass fibre reinforced epoxy composites. COMPOSITES PART B-ENGINEERING, 143, 168–171. https://doi.org/10.1016/j.compositesb.2018.02.014 ( reposiTUm)

Gorsche, C., Schnoell, C., Koch, T., Moszner, N., & Liska, R. (2018). Debonding on Demand with Highly Cross-Linked Photopolymers: A Combination of Network Regulation and Thermally Induced Gas Formation. Macromolecules, 51(3), 660–669. https://doi.org/10.1021/acs.macromol.7b02321 ( reposiTUm)

Tromayer, M., Dobos, A., Gruber, P., Ajami, A., Dedic, R., Ovsianikov, A., & Liska, R. (2018). A biocompatible diazosulfonate initiator for direct encapsulation of human stem cells via two-photon polymerization. Polymer Chemistry, 9(22), 3108–3117. https://doi.org/10.1039/c8py00278a ( reposiTUm)

Steyrer, B., Busetti, B., Harakály, G., Liska, R., & Stampfl, J. (2018). Hot Lithography vs. room temperature DLP 3D-printing of a dimethacrylate. Additive Manufacturing, 21, 209–214. https://doi.org/10.1016/j.addma.2018.03.013 ( reposiTUm)

Gorsche, C., Seidler, K., Reghunathan, H., Kury, M., Koch, T., Moszner, N., & Liska, R. (2018). Difunctional vinyl sulfonate esters for the fabrication of tough methacrylate-based photopolymer networks. Polymer, 158, 149–157. https://doi.org/10.1016/j.polymer.2018.10.024 ( reposiTUm)

Peer, G., Dorfinger, P., Koch, T., Stampfl, J., Gorsche, C., & Liska, R. (2018). Photopolymerization of Cyclopolymerizable Monomers and Their Application in Hot Lithography. Macromolecules, 51(22), 9344–9353. https://doi.org/10.1021/acs.macromol.8b01991 ( reposiTUm)

Ajami, A., Husinsky, W., Ovsianikov, A., & Liska, R. (2018). Dispersive white light continuum single Z-scan for rapid determination of degenerate two-photon absorption spectra. Applied Physics B: Lasers and Optics, 124, Article 142. https://doi.org/10.1007/s00340-018-7011-0 ( reposiTUm)

Mitterbauer, M., Knaack, P., Naumov, S., Markovic, M., Ovsianikov, A., Moszner, N., & Liska, R. (2018). Acylstannane: Spaltbare und hochreaktive Photoinitiatoren für radikalische Photopolymerisationen bei Wellenlängen über 500 nm mit exzellentem Photobleaching. Angewandte Chemie, 130(37), 12323–12327. https://doi.org/10.1002/ange.201804094 ( reposiTUm)

Mitterbauer, M., Knaack, P., Naumov, S., Markovic, M., Ovsianikov, A., Moszner, N., & Liska, R. (2018). Acylstannanes: Cleavable and Highly Reactive Photoinitiators for Radical Photopolymerization at Wavelengths above 500 nm with Excellent Photobleaching Behavior. Angewandte Chemie International Edition, 57(37), 12146–12150. https://doi.org/10.1002/anie.201804094 ( reposiTUm)

Lunzer, M., Shi, L., Andriotis, O. G., Gruber, P., Markovic, M., Thurner, P. J., Ossipov, D., Liska, R., & Ovsianikov, A. (2018). A Modular Approach to Sensitized Two-Photon Patterning of Photodegradable Hydrogels. Angewandte Chemie, 130(46), 15342–15347. https://doi.org/10.1002/ange.201808908 ( reposiTUm)

Tromayer, M., Gruber, P., Rosspeintner, A., Ajami, A., Husinsky, W., Plasser, F., González, L., Vauthey, E., Ovsianikov, A., & Liska, R. (2018). Wavelength-optimized Two-Photon Polymerization Using Initiators Based on Multipolar Aminostyryl-1,3,5-triazines. Scientific Reports, 8(17273). https://doi.org/10.1038/s41598-018-35301-x ( reposiTUm)

Lunzer, M., Shi, L., Andriotis, O. G., Gruber, P., Markovic, M., Thurner, P. J., Ossipov, D., Liska, R., & Ovsianikov, A. (2018). A Modular Approach to Sensitized Two-Photon Patterning of Photodegradable Hydrogels. Angewandte Chemie International Edition, 57(46), 15122–15127. https://doi.org/10.1002/anie.201808908 ( reposiTUm)

Wang, J., Stanic, S. D., Altun, A. A., Schwentenwein, M., Dietliker, K., Jin, L., Stampfl, J., Baudis, S., Liska, R., & Grützmacher, H. (2018). A highly efficient waterborne photoinitiator for visible-light-induced three-dimensional printing of hydrogels. Chemical Communications, 54(8), 920–923. https://doi.org/10.1039/c7cc09313f ( reposiTUm)

Orman, S., Hofstetter, C., Aksu, A., Reinauer, F., Liska, R., & Baudis, S. (2018). Toughness enhancers for bone scaffold materials based on biocompatible photopolymers. Journal of Polymer Science, 57(2), 110–119. https://doi.org/10.1002/pola.29273 ( reposiTUm)

Seidler, K., Ehrmann, K., Steinbauer, P., Rohatschek, A., Andriotis, O., Dworak, C., Koch, T., Bergmeister, H., Grasl, C., Schima, H., Thurner, P., Liska, R., & Baudis, S. (2018). A structural reconsideration: Linear aliphatic or alicyclic hard segments for biodegradable thermoplastic polyurethanes? Journal of Polymer Science, 56(19), 2214–2224. https://doi.org/10.1002/pola.29190 ( reposiTUm)

Catel, Y., Fässler, P., Fischer, U., Gorsche, C., Liska, R., Schörpf, S., Tauscher, S., & Moszner, N. (2018). Synthesis and polymerization of vinylcyclopropanes bearing urethane groups for the development of low-shrinkage composites. European Polymer Journal, 98, 439–447. https://doi.org/10.1016/j.eurpolymj.2017.11.042 ( reposiTUm)

Mandt, D., Gruber, P., Markovic, M., Tromayer, M., Rothbauer, M., Kratz, S. R. A., Faheem Ali, S., Van Hoorick, J., Holnthoner, W., Mühleder, S., Dubruel, P., Van Vlierberghe, S., Ertl, P., Liska, R., & Ovsianikov, A. (2018). Fabrication of biomimetic placental barrier structures within a microfluidic device utilizing two-photon polymerization. INTERNATIONAL JOURNAL OF BIOPRINTING. https://doi.org/10.18063/IJB.v4i2.144 ( reposiTUm)

Theis, S., Iturmendi, A., Gorsche, C., Orthofer, M., Lunzer, M., Baudis, S., Ovsianikov, A., Liska, R., Monkowius, U., & Teasdale, I. (2017). Durch sichtbares Licht und Nahinfrarotstrahlung abbaubare supramolekulare Metallo-Gele. Angewandte Chemie, 129(50), 16071–16075. http://hdl.handle.net/20.500.12708/147215 ( reposiTUm)

Dereka, B., Svechkarev, D., Rosspeintner, A., Tromayer, M., Liska, R., Mohs, A. M., & Vauthey, E. (2017). Direct Observation of a Photochemical Alkyne-Allene Reaction and of a Twisted and Rehybridized Intramolecular Charge-Transfer State in a Donor-Acceptor Dyad. Journal of the American Chemical Society, 139(46), 16885–16893. https://doi.org/10.1021/jacs.7b09591 ( reposiTUm)

Theis, S., Iturmendi, A., Gorsche, C., Orthofer, M., Lunzer, M., Baudis, S., Ovsianikov, A., Liska, R., Monkowius, U., & Teasdale, I. (2017). Metallo-Supramolecular Photocleavable Gels Sensitive to Visible and Near Infrared Irradiation. Angewandte Chemie International Edition, 56(50), 15857–15860. http://hdl.handle.net/20.500.12708/146897 ( reposiTUm)

Brigo, L., Urciuolo, A., Giulitti, S., Della Giustina, G., Tromayer, M., Liska, R., Elvassore, N., & Brusatin, G. (2017). 3D high-resolution two-photon crosslinked hydrogel structures for biological studies. Acta Biomaterialia, 55, 373–384. https://doi.org/10.1016/j.actbio.2017.03.036 ( reposiTUm)

Klikovits, N., Knaack, P., Bomze, D., Krossing, I., & Liska, R. (2017). Novel photoacid generators for cationic photopolymerization. Polymer Chemistry, 8(30), 4414–4421. https://doi.org/10.1039/c7py00855d ( reposiTUm)

Gorsche, C., Reghunathan, H., Baudis, S., Knaack, P., Husar, B., Laeuger, J., Hoffmann, H., & Liska, R. (2017). Real Time-NIR/MIR-Photorheology: A Versatile Tool for the in Situ Characterization of Photopolymerization Reactions. Analytical Chemistry, 89(9), 4958–4968. https://doi.org/10.1021/acs.analchem.7b00272 ( reposiTUm)

Della Giustina, G., Giulitti, S., Brigo, L., Zanatta, M., Tromayer, M., Liska, R., Elvassore, N., & Brusatin, G. (2017). Hydrogel with Orthogonal Reactive Units: 2D and 3D Cross-Linking Modulation. Macromolecular Rapid Communications, 38(1), 1600570. http://hdl.handle.net/20.500.12708/146421 ( reposiTUm)

Tromayer, M., Gruber, P., Markovic, M., Rosspeintner, A., Vauthey, E., Redl, H., Ovsianikov, A., & Liska, R. (2017). A biocompatible macromolecular two-photon initiator based on hyaluronan. Polymer Chemistry, 8(2), 451–460. https://doi.org/10.1039/c6py01787h ( reposiTUm)

Radebner, J., Eibel, A., Leypold, M., Gorsche, C., Schuh, L., Fischer, R., Torvisco, A., Neshchadin, D., Geier, R., Moszner, N., Liska, R., Gescheidt, G., Haas, M., & Stüger, H. (2017). Tetraacylgermanes: Highly Efficient Photoinitiators for Visible-Light-Induced Free-Radical Polymerization. Angewandte Chemie International Edition, 56(11), 3103–3107. http://hdl.handle.net/20.500.12708/146429 ( reposiTUm)

Van Hoorick, J., Gruber, P., Markovic, M., Tromayer, M., Van Erps, J., Thienpont, H., Liska, R., Ovsianikov, A., Dubruel, P., & Van Vlierberghe, S. (2017). Cross-Linkable Gelatins with Superior Mechanical Properties Through Carboxylic Acid Modification: Increasing the Two-Photon Polymerization Potential Quick View Other Sources. Biomacromolecules, 18(10), 3260–3272. https://doi.org/10.1021/acs.biomac.7b00905 ( reposiTUm)

Klikovits, N., Liska, R., D´Anna, A., & Sangermano, M. (2017). Successful UV-Induced RICFP of Epoxy-Composites. Macromolecular Chemistry and Physics, 218(18), 1700313–1700316. http://hdl.handle.net/20.500.12708/146884 ( reposiTUm)

Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mulhaupt, R. (2017). Polymers for 3D Printing and Customized Additive Manufacturing. Chemical Reviews, 117(15), 10212–10290. https://doi.org/10.1021/acs.chemrev.7b00074 ( reposiTUm)

Ajami, A., Husinsky, W., Tromayer, M., Gruber, P., Liska, R., & Ovsianikov, A. (2017). Measurement of degenerate two-photon absorption spectra of a series of developed two-photon initiators using a dispersive white light continuum Z-scan. Applied Physics Letters, 111, 0719011–0719014. http://hdl.handle.net/20.500.12708/146840 ( reposiTUm)

Mitterbauer, M., Haas, M., Stüger, H., Moszner, N., & Liska, R. (2017). Tetrakis(2,4,6-Trimethylbenzoyl)Silane-A Novel Photoinitiator for Visible Light Curing. Macromolecular Materials and Engineering, 302(5), 1600536. https://doi.org/10.1002/mame.201600536 ( reposiTUm)

Steyrer, B., Neubauer, P., Liska, R., & Stampfl, J. (2017). Visible Light Photoinitiator for 3D-Printing of Tough Methacrylate Resins. Materials, 10(12), 1445. https://doi.org/10.3390/ma10121445 ( reposiTUm)

Catel, Y., Fässler, P., Fischer, U. K., Gorsche, C., Schörpf, S., Tauscher, S., Liska, R., & Moszner, N. (2017). Evaluation of Difunctional Vinylcyclopropanes as Reactive Diluents for the Development of Low-Shrinkage Composites. Macromolecular Materials and Engineering, 302(4), 1700021–1700031. http://hdl.handle.net/20.500.12708/146531 ( reposiTUm)

Dereka, B., Rosspeintner, A., Li, Z., Liska, R., & Vauthey, E. (2016). Direct Visualization of Excited-State Symmetry Breaking Using Ultrafast Time-Resolved Infrared Spectroscopy. Journal of the American Chemical Society, 138(13), 4643–4649. https://doi.org/10.1021/jacs.6b01362 ( reposiTUm)

Leitgeb, M., Nees, D., Ruttloff, S., Palfinger, U., Götz, J., Liska, R., Belegratis, M. R., & Stadlober, B. (2016). Multilength Scale Patterning of Functional Layers by Roll-to-Roll Ultraviolet-Light-Assisted Nanoimprint Lithography. ACS Nano, 10(5), 4926–4941. https://doi.org/10.1021/acsnano.5b07411 ( reposiTUm)

Mautner, A., Steinbauer, B., Russmüller, G., Lieber, R., Koch, T., Stampfl, J., & Liska, R. (2016). Vinyl carbonate photopolymers with improved mechanical properties for biomedical applications. DESIGNED MONOMERS AND POLYMERS, 19(5), 437–444. https://doi.org/10.1080/15685551.2016.1169378 ( reposiTUm)

Baudis, S., Bomze, D., Markovic, M., Gruber, P., Ovsianikov, A., & Liska, R. (2016). Modular Material System for the Microfabrication of Biocompatible Hydrogels Based on Thiol-Ene-Modified Poly(vinyl alcohol). Journal of Polymer Science Part A: Polymer Chemistry, 54(13), 2060–2070. http://hdl.handle.net/20.500.12708/148654 ( reposiTUm)

Mautner, A., Steinbauer, B., Orman, S., Russmüller, G., Macfelda, K., Koch, T., Stampfl, J., & Liska, R. (2016). Tough photopolymers based on vinyl esters for biomedical applications. Journal of Polymer Science Part A: Polymer Chemistry, 54(13), 1987–1997. http://hdl.handle.net/20.500.12708/148648 ( reposiTUm)

Oesterreicher, A., Gorsche, C., Ayalur-Karunakaran, S., Moser, A., Edler, M., Pinter, G., Schlögl, S., Liska, R., & Griesser, T. (2016). Exploring Network Formation of Tough and Biocompatible Thiol-yne Based Photopolymers. Macromolecular Rapid Communications, 37(20), 1701–1706. http://hdl.handle.net/20.500.12708/148980 ( reposiTUm)

Bomze, D., Knaack, P., Koch, T., Jin, H., & Liska, R. (2016). Radical induced cationic frontal polymerization as a versatile tool for epoxy curing and composite production. Journal of Polymer Science Part A: Polymer Chemistry, 54(23), 3751–3759. http://hdl.handle.net/20.500.12708/148978 ( reposiTUm)

Enayati, M., Eilenberg, M., Grasl, C., Riedl, P., Kaun, C., Messner, B., Walter, I., Liska, R., Schima, H., Wojta, J., Podesser, B. K., & Bergmeister, H. (2016). Biocompatibility Assessment of a New Biodegradable Vascular Graft via In Vitro Co-culture Approaches and In Vivo Model. Annals of Biomedical Engineering, 44(11), 3319–3334. https://doi.org/10.1007/s10439-016-1601-y ( reposiTUm)

Gorsche, C., Seidler, K., Knaack, P., Dorfinger, P., Koch, T., Stampfl, J., Moszner, N., & Liska, R. (2016). Rapid formation of regulated methacrylate networks yielding tough materials for lithography-based 3D printing. Polymer Chemistry. https://doi.org/10.1039/C5PY02009C ( reposiTUm)

Ligon-Auer, S. C., Schwentenwein, M., Gorsche, C., Stampfl, J., & Liska, R. (2016). Toughening of photo-curable polymer networks: a review. Polymer Chemistry, 7(2), 257–286. https://doi.org/10.1039/c5py01631b ( reposiTUm)

Ligon, S., Seidler, K., Gorsche, C., Griesser, M., Moszner, N., & Liska, R. (2016). Allyl sulfides and α-substituted acrylates as addition-fragmentation chain transfer agents for methacrylate polymer networks. Journal of Polymer Science Part A: Polymer Chemistry, 53(3), 394–406. http://hdl.handle.net/20.500.12708/148267 ( reposiTUm)

Turnšek, M., Krajnc, P., Liska, R., & Koch, T. (2016). Macroporous alumina with cellular interconnected morphology from emulsion templated polymer composite precursors. Journal of the European Ceramic Society, 36(4), 1045–1051. https://doi.org/10.1016/j.jeurceramsoc.2015.11.036 ( reposiTUm)

Gauss, P., Ligon, S., Griesser, M., Gorsche, C., Svajdlenková, H., Koch, T., Moszner, N., & Liska, R. (2016). The influence of vinyl activating groups on β-allyl sulfone based chain transfer agents for tough methacrylate networks. Journal of Polymer Science Part A: Polymer Chemistry, 54(10), 1417–1427. http://hdl.handle.net/20.500.12708/148358 ( reposiTUm)

Tauscher, S., Catel, Y., Liska, R., & Moszner, N. (2016). New Radiopaque Bromine-Containing Monomers for Dental Restorative Materials. Macromolecular Materials and Engineering, 301(6), 733–742. http://hdl.handle.net/20.500.12708/148686 ( reposiTUm)

Bergmeister, H., Seyidova, N., Schreiber, C., Strobl, M., Grasl, C., Walter, I., Messner, B., Baudis, S., Fröhlich, S., Marchetti-Deschmann, M., Griesser, M., di Franco, M., Krssak, M., Liska, R., & Schima, H. (2015). Biodegradable, thermoplastic polyurethane grafts for small diameter vascular replacements. Acta Biomaterialia, 11, 104–113. https://doi.org/10.1016/j.actbio.2014.09.003 ( reposiTUm)

Gorsche, C., Koch, T., Moszner, N., & Liska, R. (2015). Exploring the benefits of β-allyl sulfones for more homogeneous dimethacrylate photopolymer networks. Polymer Chemistry, 6(11), 2038–2047. https://doi.org/10.1039/c4py01582g ( reposiTUm)

Kreutzer, J., Qin, X.-H., Gorsche, C., Peterlik, H., Liska, R., & Schubert, U. (2015). Variation of the crosslinking density in cluster-reinforced polymers. Materials Today Communications, 5, 10–17. https://doi.org/10.1016/j.mtcomm.2015.09.001 ( reposiTUm)

Dworak, C., Ligon, S. C., Tiefenthaller, R., Lagref, J. J., Frantz, R., Cherkaoui, Z. M., & Liska, R. (2015). Imidazole-based ionic liquids for free radical photopolymerization. DESIGNED MONOMERS AND POLYMERS, 18(3), 262–270. https://doi.org/10.1080/15685551.2014.999466 ( reposiTUm)

Qin, X., Labuda, K., Chen, J., Hruschka, V., Khadem, A., Liska, R., Redl, H., & Slezak, P. (2015). Development of Synthetic Platelet-Activating Hydrogel Matrices to Induce Local Hemostasis. Advanced Functional Materials, 25, 6606–6617. http://hdl.handle.net/20.500.12708/151301 ( reposiTUm)

Benedikt, S., Wang, J., Markovic, M., Moszner, N., Dietliker, K., Ovsianikov, A., Grützmacher, H., & Liska, R. (2015). Highly efficient water-soluble visible light photoinitiators. Journal of Polymer Science Part A: Polymer Chemistry, 53(24). http://hdl.handle.net/20.500.12708/151302 ( reposiTUm)

Fröhlich, S. M., Eilenberg, M., Svirkova, A., Grasl, C., Liska, R., Bergmeister, H., & Marchetti-Deschmann, M. (2015). Mass spectrometric imaging of in vivo protein and lipid adsorption on biodegradable vascular replacement systems. Analyst, 140(17), 6089–6099. https://doi.org/10.1039/c5an00921a ( reposiTUm)

Potzmann, P. M., Lopez Villanueva, F. J., & Liska, R. (2015). UV-Initiated Bubble-Free Frontal Polymerization in Aqueous Conditions. Macromolecules, 48(24), 8738–8745. https://doi.org/10.1021/acs.macromol.5b02348 ( reposiTUm)

Markovic, M., Van Hoorick, J., Hölzl, K., Tromayer, M., Gruber, P., Nürnberger, S., Dubruel, P., Van Vlierberghe, S., Liska, R., & Ovsianikov, A. (2015). Hybrid Tissue Engineering Scaffolds by Combination of Three-Dimensional Printing and Cell Photoencapsulation. Journal of Nanotechnology in Engineering and Medicine, 6(2). https://doi.org/10.1115/1.4031466 ( reposiTUm)

Ajami, A., Gruber, P., Tromayer, M., Husinsky, W., Stampfl, J., Liska, R., & Ovsianikov, A. (2015). Evidence of concentration dependence of the two-photon absorption cross section: Determining the “‘true’” cross section value. Optical Materials, 47, 524–529. https://doi.org/10.1016/j.optmat.2015.06.033 ( reposiTUm)

Bomze, D., Knaack, P., & Liska, R. (2015). Successful radical induced cationic frontal polymerization of epoxy-based monomers by C-C labile compounds. Polymer Chemistry, 6(47), 8161–8167. https://doi.org/10.1039/c5py01451d ( reposiTUm)

Russmueller, G., Liska, R., Stampfl, J., Heller, C., Mautner, A., Macfelda, K., Kapeller, B., Lieber, R., Haider, A., Mika, K., Schopper, C., Perisanidis, C., Seemann, R., & Moser, D. (2015). 3D Printable Biophotopolymers for in vivo Bone Regeneration. Materials, 8(6), 3685–3700. https://doi.org/10.3390/ma8063685 ( reposiTUm)

Franz, A., Spinell, T., Graf, A., Wutzel, H., Liska, R., Watts, D. C., Moritz, A., & Schedle, A. (2014). Cytotoxicity of post and core composites as a function of environmental conditions. Dental Materials, 30(10), 1179–1186. https://doi.org/10.1016/j.dental.2014.07.011 ( reposiTUm)

Gorsche, C., Griesser, M., Hametner, C., Ganster, B., Moszner, N., Neshchadin, D., Rosspeintner, A., Gescheidt, G., Saf, R., & Liska, R. (2014). New Generation of Highly Efficient, Long-Wavelength Photoinitiators for Dental Restoratives: From Research to Application. RadTech Report, 4, 12–18. http://hdl.handle.net/20.500.12708/157957 ( reposiTUm)

Gorsche, C., Griesser, M., Gescheidt, G., Moszner, N., & Liska, R. (2014). β‑Allyl Sulfones as Addition−Fragmentation Chain Transfer Reagents: A Tool for Adjusting Thermal and Mechanical Properties of Dimethacrylate Networks. Macromolecules, 47(21), 7327–7336. https://doi.org/10.1021/ma501550b ( reposiTUm)

Rothemund, S., Aigner, T., Iturmendi, A., Rigau, M., Husar, B., Hildner, F., Oberbauer, E., Prambauer, M., Olawale, G., Forstner, R., Liska, R., Schröder, K., Brüggemann, O., & Teasdale, I. (2014). Degradable Glycine-Based Photo- Polymerizable Polyphosphazenes for Use as Scaffolds for Tissue Regeneration. Macromolecular Bioscience, #?, 1–13. http://hdl.handle.net/20.500.12708/157626 ( reposiTUm)

Susec, M., Liska, R., Russmüller, G., Kotek, J., & Krajnc, P. (2014). Microcellular Open Porous Monoliths for Cell Growth by Thiol-Ene Polymerization of Low-Toxicity Monomers in High Internal Phase Emulsions. Macromolecular Bioscience, #?, 1–9. http://hdl.handle.net/20.500.12708/157622 ( reposiTUm)

Petrochenko, P., Torgersen, J., Gruber, P., Hicks, L., Zheng, J., Kumar, G., Narayan, R., Goering, P., Liska, R., Stampfl, J., & Ovsianikov, A. (2014). Laser 3D Printing with Sub‐Microscale Resolution of Porous Elastomeric Scaffolds for Supporting Human Bone Stem Cells. Advanced Healthcare Materials, #(#). http://hdl.handle.net/20.500.12708/157469 ( reposiTUm)

Woods, R., Feldbacher, S., Zidar, D., Langer, G., Satzinger, V., Schmidt, V., Pucher, N., Liska, R., & Kern, W. (2014). 3D optical waveguides produced by two photon photopolymerisation of a flexible silanol terminated polysiloxane containing acrylate functional groupsfunctional groups. Optical Materials Express, 4(3), 486. https://doi.org/10.1364/ome.4.000486 ( reposiTUm)

Husár, B., Ligon, S. C., Wutzel, H., Hoffmann, H., & Liska, R. (2014). The formulator’s guide to anti-oxygen inhibition additives. Progress in Organic Coatings, 77(11), 1789–1798. https://doi.org/10.1016/j.porgcoat.2014.06.005 ( reposiTUm)

Benedikt, S., Moszner, N., & Liska, R. (2014). Benzoyl Phenyltelluride as Highly Reactive Visible-Light TERP-Reagent for Controlled Radical Polymerization. Macromolecules, 47(16), 5526–5531. https://doi.org/10.1021/ma5011588 ( reposiTUm)

Ligon, S. C., Husár, B., Wutzel, H., Holman, R., & Liska, R. (2014). Strategies to Reduce Oxygen Inhibition in Photoinduced Polymerization. Chemical Reviews, 114(1), 557–589. https://doi.org/10.1021/cr3005197 ( reposiTUm)

Ovsianikov, A., Mühleder, S., Torgersen, J., Zhiquan, L., Qin, X.-H., Van Vlierberghe, S., Dubruel, P., Holnthoner, W., Redl, H., Liska, R., & Stampfl, J. (2014). Laser Photofabrication of Cell-Containing Hydrogel Constructs. Langmuir, 30(13), 3787–3794. https://doi.org/10.1021/la402346z ( reposiTUm)

Qin, X.-H., Gruber, P., Markovic, M., Plochberger, B., Klotzsch, E., Stampfl, J., Ovsianikov, A., & Liska, R. (2014). Enzymatic synthesis of hyaluronic acid vinyl esters for two-photon microfabrication of biocompatible and biodegradable hydrogel constructs. Polymer Chemistry. https://doi.org/10.1039/c4py00792a ( reposiTUm)

Qin, X.-H., Ovsianikov, A., Stampfl, J., & Liska, R. (2014). Additive manufacturing of photosensitive hydrogels for tissue engineering applications. BioNanoMaterials. https://doi.org/10.1515/bnm-2014-0008 ( reposiTUm)

Kupfmüller, J., Li, Z., Satzinger, V., Stampfl, J., & Liska, R. (2013). Two-photon-induced thiol-ene polymerization as a fabrication tool for flexible optical waveguides. Designed Monomers and Polymers, #?, 1–11. http://hdl.handle.net/20.500.12708/155396 ( reposiTUm)

Qin, X., Torgersen, J., Saf, R., Mühleder, S., Pucher, N. U., Ligon, S., Holnthoner, W., Redl, H., Ovsianikov, A., Stampfl, J., & Liska, R. (2013). Three-Dimensional Microfabrication of Protein Hydrogels via Two-Photon-Excited Thiol-Vinyl Ester Photopolymerization. Journal of Polymer Science Part A: Polymer Chemistry, 51, 4799–4810. http://hdl.handle.net/20.500.12708/155393 ( reposiTUm)

Esfandiari, P., Ligon, S., Lagref, J. J., Frantz, R., Cherkaoui, Z. M., & Liska, R. (2013). Efficient Stabilization of Thiol-ene Formulations in Radical Photopolymerization. Journal of Polymer Science Part A: Polymer Chemistry, 51, 4261–4266. http://hdl.handle.net/20.500.12708/155395 ( reposiTUm)

Neshchadin, D., Rosspeintner, A., Griesser, M., Lang, B., Mosquera-Vazquez, S., Vauthey, E., Gorelik, V., Liska, R., Hametner, C., Ganster, B., Saf, R., Moszner, N., & Gescheidt, G. (2013). Acylgermanes: Photoinitiators and Sources for Ge-Centered Radicals. Insights into their Reactivity. Journal of the American Chemical Society, 135(46), 17314–17321. https://doi.org/10.1021/ja404433u ( reposiTUm)

Li, Z., Stankevičius, E., Ajami, A., Račiukaitis, G., Husinsky, W., Ovsianikov, A., Stampfl, J., & Liska, R. (2013). 3D alkyne-azide cycloaddition: spatiotemporally controlled by combination of aryl azide photochemistry and two-photon grafting. Chemical Communications, 49(69), 7635. https://doi.org/10.1039/c3cc43533d ( reposiTUm)

Li, Z., Pucher, N., Cicha, K., Torgersen, J., Ligon, S. C., Ajami, A., Husinsky, W., Rosspeintner, A., Vauthey, E., Naumov, S., Scherzer, T., Stampfl, J., & Liska, R. (2013). Straightforward Synthesis and Structure-Activity Relationship of Highly Efficient Initiators for Two-Photon Polymerization. Macromolecules, 46(2), 352–361. https://doi.org/10.1021/ma301770a ( reposiTUm)

Torgersen, J., Qin, X., Li, Z., Ovsianikov, A., Liska, R., & Stampfl, J. (2013). Hydrogels for Two-Photon Polymerization: A Toolbox for Mimicking the Extracellular Matrix. Advanced Functional Materials, 10(6). http://hdl.handle.net/20.500.12708/155051 ( reposiTUm)

Susec, M., Ligon, S., Stampfl, J., Liska, R., & Krajnc, P. (2013). Hierarchically Porous Materials from Layer-by-Layer Photopolymerization of High Internal Phase Emulsions. Macromolecular Rapid Communications, 34, 938–943. http://hdl.handle.net/20.500.12708/155096 ( reposiTUm)

Kellner, M., Radovanovic, P., Matovic, J., & Liska, R. (2013). Novel cross-linkers for asymmetric poly-AMPS-based proton exchange membranes for fuel cells. DESIGNED MONOMERS AND POLYMERS, #?, 1–8. http://hdl.handle.net/20.500.12708/155394 ( reposiTUm)

Li, Z., Ajami, A., Stankevicius, E., Husinsky, W., Račiukaitis, G., Stampfl, J., Liska, R., & Ovsianikov, A. (2013). 3D photografting with aromatic azides: A comparison between three-photon and two-photon case. Optical Materials. https://doi.org/10.1016/j.optmat.2013.04.007 ( reposiTUm)

Li, Z., Torgersen, J., Ajami, A., Mühleder, S., Qin, X., Husinsky, W., Holnthoner, W., Ovsianikov, A., Stampfl, J., & Liska, R. (2013). Initiation efficiency and cytotoxicity of novel water-soluble two-photon photoinitiators for direct 3D microfabrication of hydrogels. RSC Advances. https://doi.org/10.1039/c3ra42918k ( reposiTUm)

Bergmeister, H., Strobl, M., Grasl, C., Liska, R., & Schima, H. (2013). Tissue engineering of vascular grafts. European Surgery, 45(4), 187–193. https://doi.org/10.1007/s10353-013-0224-x ( reposiTUm)

Ovsianikov, A., Li, Z., Ajami, A., Torgersen, J., Husinsky, W., Stampfl, J., & Liska, R. (2012). 3D grafting via three-photon induced photolysis of aromatic azides. Applied Physics A: Materials Science and Processing, 108(1), 29–34. https://doi.org/10.1007/s00339-012-6964-9 ( reposiTUm)

Ovsianikov, A., Li, Z., Torgersen, J., Stampfl, J., & Liska, R. (2012). Selective Functionalization of 3D Matrices Via Multiphoton Grafting and Subsequent Click Chemsitry. Advanced Functional Materials, 22(16), 3429–3433. https://doi.org/10.1002/adfm.201200419 ( reposiTUm)

Torgersen, J., Ovsianikov, A., Mironov, V., Pucher, N. U., Qin, X., Li, Z., Cicha, K., Machacek, T., Jantsch-Plunger, V., Liska, R., & Stampfl, J. (2012). Photo-sensitive hydrogels for threedimensional laser microfabrication in the presence of whole organisms. Journal of Biomedical Optics, 17(10), 1–10. http://hdl.handle.net/20.500.12708/164046 ( reposiTUm)

Husár, B., & Liska, R. (2012). Vinyl carbonates, vinyl carbamates, and related monomers: synthesis, polymerization, and application. Chemical Society Reviews, 41(6), 2395–2405. https://doi.org/10.1039/c1cs15232g ( reposiTUm)

Ligon, S., Baudis, S., Nehl, F., Bergmeister, H., Nigisch, A., Stampfl, J., Liska, R., & Husar, B. (2012). Improved elastomeric materials for CAD/CAM generation of vascular structures in soft tissue replacement therapies. Journal of Tissue Engineering and Regenerative Medicine, 6(Supplement 1), 301. http://hdl.handle.net/20.500.12708/165077 ( reposiTUm)

Griesser, M., Dworak, C., Jauk, S., Höfer, M., Rosspeintner, A., Grabner, G., Liska, R., & Gescheidt, G. (2012). Photoinitiators with β-Phenylogous Cleavage: An Evaluation of Reaction Mechanisms and Performance. Macromolecules, 45(4), 1737–1745. https://doi.org/10.1021/ma3000225 ( reposiTUm)

Mautner, A., Qin, X., Kapeller, B., Russmüller, G., Koch, T., Stampfl, J., & Liska, R. (2012). Efficient Curing of Vinyl Carbonates by Thiol-Ene Polymerization. Macromolecular Rapid Communications, 33(23), 2046–2052. http://hdl.handle.net/20.500.12708/164671 ( reposiTUm)

Griesser, M., Rosspeintner, A., Dworak, C., Höfer, M., Grabner, G., Liska, R., & Gescheidt, G. (2012). Initiators Based on Benzaldoximes: Bimolecular and Covalently Bound Systems. Macromolecules, 45(21), 8648–8657. https://doi.org/10.1021/ma301959n ( reposiTUm)

Mautner, A., Qin, X., Wutzel, H., Kapeller, B., Moser, D., Russmüller, G., Stampfl, J., & Liska, R. (2012). Thiol-Ene Photopolymerization for Efficient Curing of Vinyl Esters. Journal of Polymer Science Part A: Polymer Chemistry, 51(1), 203–212. http://hdl.handle.net/20.500.12708/164676 ( reposiTUm)

Baudis, S., Ligon, S., Seidler, K., Weigel, G., Grasl, C., Bergmeister, H., Schima, H., & Liska, R. (2012). Hard-Block Degradable Thermoplastic Urethane-Elastomers for Electrospun Vascular Prostheses. Journal of Polymer Science Part A: Polymer Chemistry, 50(7), 1272–1280. http://hdl.handle.net/20.500.12708/164664 ( reposiTUm)

Schreiber, C., Seyidova, N., Baudis, S., Grasl, C., Walter, I., Bernhard, D., Liska, R., Schima, H., & Bergmeister, H. (2012). Long term evaluation of a new synthetic degradable small diameter vascular graft. European Surgery, 44(Supplement 245/12), 16. http://hdl.handle.net/20.500.12708/164908 ( reposiTUm)

Bergmeister, H., Grasl, C., Stoiber, M., Schreiber, C., Seyidova, N., Walter, I., Bernhard, D., Ligon, S., Liska, R., & Schima, H. (2012). Healing characteristics of nanostructured, bioresorbable vascular substitutes. Journal of Tissue Engineering and Regenerative Medicine, 6(Supplement 1), 148. http://hdl.handle.net/20.500.12708/164907 ( reposiTUm)

Schreiber, C., Seyidova, N., Baudis, S., Grasl, C., Stoiber, M., Liska, R., Schima, H., & Bergmeister, H. (2012). Long-term performance of small diameter vessel grafts. European Surgery, 44(Supplement 244/12), 7. http://hdl.handle.net/20.500.12708/164906 ( reposiTUm)

Cicha, K., Koch, T., Torgersen, J., Li, Z., Liska, R., & Stampfl, J. (2012). Young’s modulus measurement of two-photon polymerized micro-cantilevers by using nanoindentation equipment. Journal of Applied Physics, 112(9), 094906. https://doi.org/10.1063/1.4764330 ( reposiTUm)

Tesavibul, P., Felzmann, R., Gruber, S., Liska, R., Thompson, I., Boccaccini, A. R., & Stampfl, J. (2012). Processing of 45S5 Bioglass by lithography-based additive manufacturing. Materials Letters, 74, 81–84. https://doi.org/10.1016/j.matlet.2012.01.019 ( reposiTUm)

Felzmann, R., Gruber, S., Mitteramskogler, G., Tesavibul, P., Boccaccini, A., Liska, R., & Stampfl, J. (2012). Lithography-based Additive Manufacturing of Cellular Ceramic Structures. Advanced Engineering Materials, 14, 1052–1058. http://hdl.handle.net/20.500.12708/165005 ( reposiTUm)

Husar, B., Mautner, A., Heller, C., Schwentenwein, M., Varga, F., Koch, T., Macfelda, K., Russmüller, G., Stampfl, J., & Liska, R. (2012). Utilization of photopolymerization of new low toxic vinyl monomers in bone tissue engineering. Journal of Tissue Engineering and Regenerative Medicine, 6/SUPPLEMENT S1/, 370. http://hdl.handle.net/20.500.12708/164996 ( reposiTUm)

Radovanovic, P., Kellner, M., Matovic, J., Liska, R., & Koch, T. (2012). Asymmetric membranes with interpenetrating proton-conducting morphology made by a combination of immersion precipitation and photopolymerization. Journal of Membrane Science, 401–402, 254–261. https://doi.org/10.1016/j.memsci.2012.02.012 ( reposiTUm)

Ovsianikov, A., Mironov, V., Stampfl, J., & Liska, R. (2012). Engineering 3D cell-culture matrices: multiphoton processing technologies for biological and tissue engineering applications. Expert Review of Medical Devices, 9(6), 613–633. https://doi.org/10.1586/erd.12.48 ( reposiTUm)

Heller, C., Schwentenwein, M., Russmüller, G., Koch, T., Moser, D., Schopper, C., Varga, F., Stampfl, J., & Liska, R. (2011). Vinylcarbonates and Vinylcarbamates: Biocompatible Monomers for Radical Photopolymerization. Journal of Polymer Science Part A: Polymer Chemistry, 49(3), 650–661. http://hdl.handle.net/20.500.12708/161763 ( reposiTUm)

Kumpfmüller, J., Stadlmann, K., Satzinger, V., Li, Z., Stampfl, J., & Liska, R. (2011). Two-photon-induced Microfabrication of Flexible Optical Waveguides. Journal of Laser Micro Nanoengineering, 6(3), 195–198. https://doi.org/10.2961/jlmn.2011.03.0004 ( reposiTUm)

Schreiber, C., Baudis, S., Grasl, C., Stoiber, M., Walter, I., Plasenzotti, R., Bernhard, D., Liska, R., Schima, H., & Bergmeister, H. (2011). In-vivo evaluation of biodegradable and non-degradable elastomeric vascular grafts. European Surgery, 43(Supplement 243/11), 23. http://hdl.handle.net/20.500.12708/164905 ( reposiTUm)

Li, Z., Siklos, M. I., Pucher, N. U., Cicha, K., Ajami, A., Husinsky, W., Rosspeintner, A., Vauthey, E., Gscheidt, G., Stampfl, J., & Liska, R. (2011). Synthesis and Structure-Activity Relationship of Several Aromatic Ketone-Based Two-Photon Initiators. Journal of Polymer Science Part A: Polymer Chemistry, 49(17), 3688–3699. https://doi.org/10.1002/pola.24806 ( reposiTUm)

Cicha, K., Li, Z., Stadlmann, K., Ovsianikov, A., Markut-Kohl, R., Liska, R., & Stampfl, J. (2011). Evaluation of 3D structures fabricated with two-photon-photopolymerization by using FTIR spectroscopy. Journal of Applied Physics, 110(6), 064911. https://doi.org/10.1063/1.3639304 ( reposiTUm)

Baudis, S., Nehl, F., Ligon, S. C., Nigisch, A., Bergmeister, H., Bernhard, D., Stampfl, J., & Liska, R. (2011). Elastomeric degradable biomaterials by photopolymerization-based CAD-CAM for vascular tissue engineering. Biomedical Materials, 6(5), 055003. https://doi.org/10.1088/1748-6041/6/5/055003 ( reposiTUm)

Liska, R. (2011). Book Review: “Industrial Photoinitiators: A Technical Guide.” ChemPhysChem, 6, 1389. http://hdl.handle.net/20.500.12708/162492 ( reposiTUm)

Husar, B., Heller, C., Schwentenwein, M., Mautner, A., Varga, F., Koch, T., Stampfl, J., & Liska, R. (2011). Biomaterials Based on Low Cytotoxic Vinyl Esters for Bone Replacement Application. Journal of Polymer Science Part A: Polymer Chemistry, 49, 4927–4934. http://hdl.handle.net/20.500.12708/162494 ( reposiTUm)

Gugg, A., Gorsche, C., Moszner, N., & Liska, R. (2011). Frontal Polymerization: Polymerization Induced Destabilization of Peracrylates. Macromolecular Rapid Communications, 32, 1096–1100. http://hdl.handle.net/20.500.12708/162493 ( reposiTUm)

Bergmeister, H., Baudis, S., Grasl, C., Stoiber, M., Schreiber, C., Walter, I., Plasenzotti, R., Liska, R., & Schima, H. (2011). In vivo evaluation of electrospun, biodegradable and non-degradable elastomeric vascular grafts. International Journal of Artificial Organs, 34(8), 641. http://hdl.handle.net/20.500.12708/164903 ( reposiTUm)

Karasu, F., Balta, D. K., Liska, R., & Arsu, N. (2010). Photoinitiated polymerization of β-cyclodextrin/methyl methacrylate host/guest complex in the presence of water soluble photoinitiator, thioxanthone-catechol-O,O’-diacetic acid. JOURNAL OF INCLUSION PHENOMENA AND MACROCYCLIC CHEMISTRY, 68(1–2), 147–153. https://doi.org/10.1007/s10847-010-9760-1 ( reposiTUm)

Baudis, S., Steyrer, B., Pulka, T., Wilhelm, H., Weigel, G., Bergmeister, H., Stampfl, J., & Liska, R. (2010). Photopolymerizable Elastomers for Vascular Tissue Regeneration. Macromolecular Symposia, 296(1), 121–126. https://doi.org/10.1002/masy.201051018 ( reposiTUm)

Dworak, C., & Liska, R. (2010). Alternative Initiators for Bimolecular Photoinitiating Systems. Journal of Polymer Science Part A: Polymer Chemistry, 48(24), 5865–5871. https://doi.org/10.1002/pola.24396 ( reposiTUm)

Dworak, C., Koch, T., Varga, F., & Liska, R. (2010). Photopolymerization of biocompatible Phosphorus-containing Vinyl esters and Vinyl carbamates. Journal of Polymer Science Part A: Polymer Chemistry, 13(48), 2916–2924. http://hdl.handle.net/20.500.12708/167150 ( reposiTUm)

Ajami, A., Husinsky, W., Liska, R., & Pucher, N. (2010). Two-photon absorption cross section measurements of various two-photon initiators for ultrashort laser radiation applying the Z-scan technique. J. Opt. Soc. Am. B: Opt. Phys., 27(11), 2290–2297. http://hdl.handle.net/20.500.12708/167581 ( reposiTUm)

Moszner, N., Lamparth, I., Angermann, J., Fischer, U. K., Zeuner, F., Bock, T., Liska, R., & Rheinberger, V. (2010). Synthesis of bis(3-{[2-(allyloxy)ethoxy]methyl}-2,4,6-trimethylbenzoyl)(phenyl)phosphine oxide - a tailor-made photoinitiator for dental adhesives. Beilstein Journal of Organic Chemistry, 6. https://doi.org/10.3762/bjoc.6.26 ( reposiTUm)

Krivec, S., Matsko, N., Satzinger, V., Pucher, N., Galler, N., Koch, T., Schmidt, V., Grogger, W., Liska, R., & Lichtenegger, H. C. (2010). Silica-Based, Organically Modified Host Material for Waveguide Structuring by Two-Photon-Induced Photopolymerization. Advanced Functional Materials, 20(5), 811–819. https://doi.org/10.1002/adfm.200901790 ( reposiTUm)

Pucher, N., Rosspeintner, A., Satzinger, V., Schmidt, V., Gescheidt, G., Stampfl, J., & Liska, R. (2009). Structure-Activity Relationship in D-π-A-π-D-Based Photoinitiators for the Two-Photon-Induced Photopolymerization Process. Macromolecules, 42(17), 6519–6528. https://doi.org/10.1021/ma9007785 ( reposiTUm)

Heller, C., Schwentenwein, M., Russmueller, G., Varga, F., Stampfl, J., & Liska, R. (2009). Vinyl Esters: Low Cytotoxicity Monomers for the Fabrication of Biocompatible 3D Scaffolds by Lithography Based Additive Manufacturing. Journal of Polymer Science Part A: Polymer Chemistry, 47(24), 6941–6954. https://doi.org/10.1002/pola.23734 ( reposiTUm)

Schuster, M., Turecek, C., Weigel, G., Saf, R., Stampfl, J., Varga, F., & Liska, R. (2009). Gelatin-Based Photopolymers for Bone Replacement Materials. Journal of Polymer Science Part A: Polymer Chemistry, 47(24), 7078–7089. https://doi.org/10.1002/pola.23747 ( reposiTUm)

Rosspeintner, A., Griesser, M., Pucher, N. U., Iskra, K., Liska, R., & Gescheidt, G. (2009). Toward the Photoinduced Reactivity of 1,5-Diphenylpenta-1,4-diyn-3-one (DPD): Real-Time Investigations by Magnetic Resonance. Macromolecules, 42, 8034–8038. http://hdl.handle.net/20.500.12708/166674 ( reposiTUm)

Griesser, M., Neshchadin, D., Dietliker, K., Moszner, N., & Liska, R. (2009). Decisive Reaction Steps at Initial Stages of Photoinitiated Radical Polymerizations. Angewandte Chemie International Edition, 48, 9359–9361. http://hdl.handle.net/20.500.12708/166675 ( reposiTUm)

Baudis, S., Heller, C., Liska, R., Stampfl, J., Bergmeister, H., & Weigel, G. (2009). (Meth)acrylate-based photoelastomers as tailored biomaterials for artificial vascular grafts. Journal of Polymer Science Part A: Polymer Chemistry, 47(10), 2664–2676. https://doi.org/10.1002/pola.23352 ( reposiTUm)

Dworak, C., Kopeinig, S., Hoffmann, H., & Liska, R. (2009). Photoinitiating monomers based on di- and triacryloylated hydroxylamine derivatives. Journal of Polymer Science Part A: Polymer Chemistry, 47(2), 392–403. https://doi.org/10.1002/pola.23156 ( reposiTUm)

Höfer, M., Moszner, N., & Liska, R. (2008). Oxygen scavengers and sensitizers for reduced oxygen inhibition in radical photopolymerization. Journal of Polymer Science Part A: Polymer Chemistry, 46(20), 6916–6927. https://doi.org/10.1002/pola.23001 ( reposiTUm)

Karasu, F., Dworak, C., Kopeinig, S., Hummer, E., Arsu, N., & Liska, R. (2008). Photoinitiating Monomers Based on Diacrylamides. Macromolecules, 41(21), 7953–7958. https://doi.org/10.1021/ma8017537 ( reposiTUm)

Ganster, B., Fischer, U. K., Moszner, N., & Liska, R. (2008). New Photocleavable Structures. V. Diacylgermane Based Photoinitiators for Visible Light Curing. Macromolecules, 41(7), 2394–2400. https://doi.org/10.1021/ma702418q ( reposiTUm)

Moszner, N., Fischer, U. K., Ganster, B., Liska, R., & Rheinberger, V. (2008). Benzoyl germanium derivatives as novel visible light photoinitiators for dental materials. Dental Materials, 24(7), 901–907. https://doi.org/10.1016/j.dental.2007.11.004 ( reposiTUm)

Stampfl, J., Baudis, S., Heller, C., Liska, R., Neumeister, A., Kling, R., Ostendorf, A., & Spitzbart, M. (2008). Photopolymers with tunable mechanical properties processed by laser based high-resolution stereolithography. Journal of Micromechanics and Microengineering, 18(12), 125014. https://doi.org/10.1088/0960-1317/18/12/125014 ( reposiTUm)

Seidl, B., Kalinyaprak-Icten, K., Fuß, N., Hoefer, M., & Liska, R. (2008). Photoinitiators with Double and Triple Bonds. Journal of Polymer Science Part A: Polymer Chemistry, 46(1), 289–301. https://doi.org/10.1002/pola.22380 ( reposiTUm)

Höfer, M., & Liska, R. (2008). Photochemistry and Initiation Behavior of Phenylethynyl Onium Salts as Cationic Photoinitiators. Journal of Polymer Science Part A: Polymer Chemistry, 47(13), 3419–3430. https://doi.org/10.1002/pola.23423 ( reposiTUm)

Sandholzer, M., Schuster, M., Varga, F., Liska, R., & Slugovc, C. (2008). ROMP based photoinitiator-coinitiator systems with improved migration sta. Journal of Polymer Science Part A: Polymer Chemistry, 46(11), 3648–3661. https://doi.org/10.1002/pola.22705 ( reposiTUm)

Stampfl, J., Baudis, S., Heller, C., Liska, R., Neumeister, A., KLING, R., Ostendorf, A., & Spitzbart, M. (2008). Photopolymers with tunable mechanical properties processed by laser-based high-resolution stereolithography. Journal of Micromechanics and Microengineering, 18(12), 125014. https://doi.org/10.1088/0960-1317/18/12/125014 ( reposiTUm)

Schuster, M., Turecek, C., Varga, F., Lichtenegger, H., Stampfl, J., & Liska, R. (2007). 3D-shaping of biodegradable photopolymers for hard tissue replacement. Applied Surface Science, 254(4), 1131–1134. https://doi.org/10.1016/j.apsusc.2007.07.182 ( reposiTUm)

Ganster, B., Fischer, U. K., Moszner, N., & Liska, R. (2007). New Photocleavable Structures, 4. Macromolecular Rapid Communications, 29(1), 57–62. https://doi.org/10.1002/marc.200700620 ( reposiTUm)

Heller, C., Pucher, N., Seidl, B., Kalinyaprak-Icten, K., Ullrich, G., Kuna, L., Satzinger, V., Schmidt, V., Lichtenegger, H. C., Stampfl, J., & Liska, R. (2007). One- and two-photon activity of cross-conjugated photoinitiators with bathochromic shift. Journal of Polymer Science Part A: Polymer Chemistry, 45(15), 3280–3291. https://doi.org/10.1002/pola.22078 ( reposiTUm)

Schuster, M., Turecek, C., Mateos, A., Stampfl, J., Liska, R., & Varga, F. (2007). Evaluation of Biocompatible Photopolymers II: Further Reactive Diluents. Monatshefte Für Chemie - Chemical Monthly, 138(4), 261–268. https://doi.org/10.1007/s00706-007-0609-2 ( reposiTUm)

Seidl, B., & Liska, R. (2007). Mechanistic investigations on a diynone type photoinitiator. Macromolecular Chemistry and Physics, 208(1), 44–54. https://doi.org/10.1002/macp.200600432 ( reposiTUm)

Schuster, M., Turecek, C., Kaiser, B., Stampfl, J., Liska, R., & Varga, F. (2007). Evaluation of Biocompatible Photopolymers I: Photoreactivity and Mechanical Properties of Reactive Diluents. Journal of Macromolecular Science Part A Pure and Applied Chemistry, 44(5), 547–557. https://doi.org/10.1080/10601320701235958 ( reposiTUm)

Infuehr, R., Pucher, N., Heller, C., Lichtenegger, H., Liska, R., Schmidt, V., Kuna, L., Haase, A., & Stampfl, J. (2007). Functional polymers by two-photon 3D lithography. Applied Surface Science, 254(4), 836–840. https://doi.org/10.1016/j.apsusc.2007.08.011 ( reposiTUm)

Liska, R., Schuster, M., Inführ, R., Turecek, C., Fritscher, C., Seidl, B., Schmidt, V., Kuna, L., Haase, A., Varga, F., Lichtenegger, H. C., & Stampfl, J. (2007). Photopolymers for rapid prototyping. Journal of Coatings Technology and Research, 4(4), 505–510. http://hdl.handle.net/20.500.12708/170095 ( reposiTUm)

Sandholzer, M., Schuster, M., Liska, R., Turecek, C., Varga, F., Stelzer, F., & Slugovc, C. (2007). Ring opening metathesis polymers as macroinitiator-coinitiator systems for the photopolymerization of acrylates. Polymer Preprints, 48, 925–926. http://hdl.handle.net/20.500.12708/169433 ( reposiTUm)

Turecek, C., Schuster, M., Varga, F., Liska, R., Kaiser, B., Stampfl, J., & Klaushofer, K. (2006). Evaluation and influence of photopolymers, capable for rapid prototyping on proliferation and morphologiy of osteoblasts. Calcified Tissue International and Musculoskeletal Research, 78, 71 P127. http://hdl.handle.net/20.500.12708/174159 ( reposiTUm)

Ullrich, G., Burtscher, P., Salz, U., Moszner, N., & Liska, R. (2006). Phenylglycine Derivatives as Coinitiators for the Radical Photopolymerization of Acidic Aqueous Formulations. Journal of Polymer Science Part A: Polymer Chemistry, 44, 115–125. http://hdl.handle.net/20.500.12708/172947 ( reposiTUm)

Ullrich, G., Ganster, B., Salz, U., Moszner, N., & Liska, R. (2006). Photoinitiators With Functional Groups. IX. Hydrophylic Bisacylphosphine Oxides for Acidic Aqueous Formulations. Journal of Polymer Science Part A: Polymer Chemistry, 44, 1686–1700. http://hdl.handle.net/20.500.12708/173104 ( reposiTUm)

Verdianz, T., Simbürger, H., & Liska, R. (2006). Surface modification of imide containing polymers II: Co-rective groups. European Polymer Journal, 42, 869–882. http://hdl.handle.net/20.500.12708/173106 ( reposiTUm)

Verdianz, T., Simbürger, H., & Liska, R. (2006). Surface modification of imide containing polymers I: Catalytic groups. European Polymer Journal, 42, 638–654. http://hdl.handle.net/20.500.12708/173105 ( reposiTUm)

Schuster, M., Inführ, R., Turecek, C., Stampfl, J., Varga, A., & Liska, R. (2006). Photopolymers for Rapid Prototyping of Soluble Mold Materials and Molding of Cellular Biomaterials. Monatshefte Für Chemie - Chemical Monthly, 137, 843–853. http://hdl.handle.net/20.500.12708/173146 ( reposiTUm)

Seidl, B., Liska, R., & Grabner, G. (2006). New photocleavable structures III. Photochemistry and photophysics of pyridinol and benzoyl-based photoinitiators. Journal of Photochemistry and Photobiology B: Biology, 180, 109–117. http://hdl.handle.net/20.500.12708/173147 ( reposiTUm)

Stampfl, J., & Liska, R. (2005). New materials for rapid prototyping applications. Macromolecular Chemistry and Physics, 206, 1253–1256. http://hdl.handle.net/20.500.12708/174068 ( reposiTUm)

Knaus, S., Spoljaric-Lukacic, L., Liska, R., & Saf, R. (2005). Peroxide-initiated grafting of maleimides onto hydrocarbon substrates. European Polymer Journal, 41, 2240–2254. http://hdl.handle.net/20.500.12708/172879 ( reposiTUm)

Jauk, S., & Liska, R. (2005). Photoinitiators with Functional Groups, 8^a - Benzophenone with Covalently Bound Phenylglycine. Macromolecular Rapid Communications, 26, 1687–1692. http://hdl.handle.net/20.500.12708/172949 ( reposiTUm)

Liska, R., & Seidl, B. (2005). 1,5-Diphenyl-1,4-diyn-3-one: A Highly Efficient Photoinitiator. Journal of Polymer Science Part A: Polymer Chemistry, 43, 101–111. http://hdl.handle.net/20.500.12708/172825 ( reposiTUm)

Liska, R., Schwager, F., Cano Vives, R., Maier, C., & Stampfl, J. (2005). Water-soluble photopolymers for rapid prototyping of cellular materials. Journal of Applied Polymer Science, 97, 2286–2298. http://hdl.handle.net/20.500.12708/174067 ( reposiTUm)

Beiträge in Tagungsbänden

Fantoni, A., Salvadori, A., Ovsianikov, A., Liska, R., & Baudis, S. (2025). Exploring Photo-Induced Polymerization and Localized Degradation in Dynamic Disulfide-Containing Hydrogels. In 15th Advanced Polymers via Macromolecular Engineering Conference (APME2025) - Book of Abstracts (pp. 349–349). http://hdl.handle.net/20.500.12708/217348 ( reposiTUm)

Ammann, T., Ehrmann, K., & Liska, R. (2025). Degradable Polyesters - A Novel Photopolymeriztation Approach Using Ring-Opening Copolymerization. In 15th Advanced Polymers via Macromolecular Engineering Conference (APME2025) : Book of Abstracts (pp. 71–71). ( reposiTUm)

Bingel, S., Musil, V., Merna, J., Ehrmann, K., & Liska, R. (2025). 3D Printing Of Star-Shaped Polyetylene Macromonomers. In BYPOS 2025 Book of Abstracts (pp. 66–66). ( reposiTUm)

Schmidt, T., Chalupa-Gantner, F., Markovic, M., Baudis, S., Liska, R., & Ovsianikov, A. (2025). Investigation of the Cytocompatibility of different Diazosulfonate-based and Water-soluble Photoinitiators for two-photon Polymerization. In International Conference on Engineering for Life Sciences : ENROL 2025 : Book of Abstracts (pp. 52–52). ( reposiTUm)

Fantoni, A., Krauß, J. E. M., Frauenlob, M., Ammann, T., Liska, R., & Baudis, S. (2025). Combining reactivity with biocompatibility: using aliphatic alpha-ketoesters as photoinitiators for the radical photopolymerization in (meth)acrylate resins. In RadTech Europe 2025 - Abstract Book (pp. 25–25). ( reposiTUm)

Schmidt, T., Chalupa-Gantner, F., Markovic, M., Baudis, S., Liska, R., & Ovsianikov, A. (2025). Development of Diazosulfonate-Based Two-Photon Photoinitiators Under the Aspect of Biofabrication. In Advanced Functional Polymers for Medicine (AFPM 2025) : Book of Abstracts (pp. 65–65). ( reposiTUm)

Schmidt, T., Markovic, M., Chalupa-Gantner, F., Baudis, S., Liska, R., & Ovsianikov, A. (2025). Advancing Two-Photon Polymerization For Biofabrication By Employing Diazosulfonate Functionalized Dyes And Their Derivatives As Photoinitiator. In 12th Belgian Symposium on Tissue Engineering (BSTE) : Bridging Science and Medicine: Tissue Engineering for Clinical Impact (pp. 59–59). ( reposiTUm)

Schmidt, T., Chalupa-Gantner, F., Markovic, M., Baudis, S., Liska, R., & Ovsianikov, A. (2025). Development of novel water-soluble, dye-based photoinitiators applicable in 2PP for biofabrication. In Alpine Winter School for Biofabrication 2025 : Book of Abstracts (pp. 14–14). ( reposiTUm)

Schmidt, T., Markovic, M., Chalupa-Gantner, F., Baudis, S., Liska, R., & Ovsianikov, A. (2025). Colorful playground: Functionalized dyes and their derivatives as photoinitiators for two-photon polymerization. In Science Days TCH 2025 : Book of Abstracts. TCH Science Days 2025 – Faculty of Technical Chemistry, Wien, Austria. ( reposiTUm)

Göschl, M., Taschner, R., Koch, T., Wolff, R., Liska, R., & Knaack, P. (2024). Sulfonium Borate Photoinitiators for high performance and low discoloration in Hot Lithography of Epoxy Resins. In IUPAC Macro 2024 - 50th World Polymer Conference Abstract Book (pp. 123–123). ( reposiTUm)

Fantoni, A., Ecker, J., Ahmadi, M., Koch, T., Stampfl, J., Liska, R., & Baudis, S. (2024). Sustainable Epoxy-methacrylate Interpenetrating Polymer Networks: Broadening the Scope of High-performance Materials for Stereolithography. In Book of Abstracts ESPS 2024: 8th European Symposium of Photopolymer Science (pp. 77–77). ( reposiTUm)

Ammann, T., Ehrmann, K., & Liska, R. (2024). Ring-opening copolymerization of epoxides and cyclic anhydrides in a novel photopolymerization approach. In Young Polymer Researchers Austria: Weiz, September 18-20, 2024: Book of Abstracts (pp. 13–13). ( reposiTUm)

Fantoni, A., Salvadori, A., Baudis, S., Ovsianikov, A., & Liska, R. (2024). Two-in-one biomaterials: exploring photo-induced polymerization and photodegradation of disulfide-based hydrogels. In 2nd TCH Science Days: PhD & Postdoc Day: Book of Abstracts (pp. 27–27). ( reposiTUm)

Ammann, T., Ehrmann, K., & Liska, R. (2024). Tackling recyclability in stereolithographic 3D printing via ring-opening photo-copolymerization. In FemChem Scientific Workshop : Book of Abstracts (pp. 5–5). ( reposiTUm)

Fantoni, A., Liska, R., & Baudis, S. (2024). Expanding the limits of aliphatic photoinitiators based on α-ketoesters for free radical photopolymerization. In Book of Abstracts ESPS 2024: 8th European Symposium of Photopolymer Science (pp. 74–74). http://hdl.handle.net/20.500.12708/202809 ( reposiTUm)

Haslinger, C., Ableidinger, K., & Liska, R. (2024). The Possibilities and Challenges of Photobase Generators for Oxa-Michael Reactions. In Book of Abstracts ESPS 2024: 8th European Symposium of Photopolymer Science. 8th European Symposium of Photopolymer Science (ESPS 2024), Stresa, Italy. ( reposiTUm)

Mayer, F., Laa, D., Stampfl, J., Liska, R., & Ehrmann, K. (2024). Interpenetrating Polymer Networks for Hot Lithography 3D printing. In 2nd TCH Science Days: PhD & Postdoc Day: Book of Abstracts (pp. 45–45). ( reposiTUm)

Haslinger, C., Liska, R., & Baudis, S. (2024). Revolutionary Sn-based photoinitiators: how to combine long wavelengths with reactivity and stability. In 2nd TCH Science Days: PhD & Postdoc Day: Book of Abstracts (pp. 31–31). https://doi.org/10.34726/8581 ( reposiTUm)

Gurmann, T., Sinawehl, L., Zintl, M., Wolff, R., Koch, T., Stampfl, J., Liska, R., Slezak, P., Redl, H., & Baudis, S. (2024). Designed to Be Broken Down: Boronic Ester Photopolymers for Improved Degradation of 3D-Printed Scaffolds. In Abstract Book Advanced Functional Polymers for Medicine 2024 (pp. 42–42). http://hdl.handle.net/20.500.12708/204667 ( reposiTUm)

Gurmann, T., Sinawehl, L., Zintl, M., Wolff, R., Koch, T., Stampfl, J., Liska, R., Slezak, P., Redl, H., & Baudis, S. (2024). Photopolymers containing boronic esters for improved degradation of 3D-printed scaffolds. In 2nd TCH Science Days: PhD & Postdoc Day: Book of Abstracts (pp. 30–30). http://hdl.handle.net/20.500.12708/204668 ( reposiTUm)

Nikolic, J., Knaack, P., & Liska, R. (2024). Synthesis and evaluation of novel MAPO-based photoinitiators. In C. Slugovc (Ed.), Young Polymer Researchers Austria: Weiz, September 18-20, 2024: Book of Abstracts (pp. 7–7). http://hdl.handle.net/20.500.12708/201807 ( reposiTUm)

Gjata, E., Liska, R., & Knaack, P. (2024). High-performance photo base generators for visible light initiation of oxa-ene Michael addition reactions. In C. Slugovc (Ed.), Young Polymer Researchers Austria: Weiz, September 18-20, 2024: Book of Abstracts (pp. 17–17). https://doi.org/10.3217/r0qzf-8c869 ( reposiTUm)

Ehrmann, K., Göschl, M., Laa, D., Stampfl, J., & Liska, R. (2024). 3D printable crystalline photopolymer networks and their applications. In C. Slugovc (Ed.), Young Polymer Researchers Austria: Weiz, September 18-20, 2024: Book of Abstracts (pp. 11–11). https://doi.org/10.3217/r0qzf-8c869 ( reposiTUm)

Haslinger, C., Liska, R., & Baudis, S. (2024). Investigation of Novel Long Wavelength Photoinitiators for Radical Polymerization. In Book of Abstracts ESPS 2024: 8th European Symposium of Photopolymer Science (pp. 115–115). AIDIC. https://doi.org/10.34726/8532 ( reposiTUm)

Fantoni, A., Koch, T., Liska, R., & Baudis, S. (2023). Synthesis and Characterization of Homogeneous Epoxy Networks: Development of a Sustainable Material Platform Using Epoxy-Alcohol Polyaddition. In Polymer Meeting 15 Book of Abstracts (pp. 131–131). ( reposiTUm)

Mayer, F., Ehrmann, K., & Liska, R. (2023). Interpenetrating polymer networks with increased strenght and toughness for Hot Lithography. In RadTech Europe Conference and Exhibition 2023 : Abstract Book. RadTech Europe 2023 Conference & Exhibition, München, Germany. http://hdl.handle.net/20.500.12708/193230 ( reposiTUm)

Haslinger, C., Leutgeb, L. P., Mitterbauer, M., Baudis, S., & Liska, R. (2023). Recent Developments of long Wavelength Photoinitiators for Radical Polymerization. In RadTech Europe 2023 : Abstract Book (pp. 92–92). http://hdl.handle.net/20.500.12708/192904 ( reposiTUm)

Diendorfer, S., Wolff, R., Knaack, P., Ehrmann, K., & Liska, R. (2023). Photo-induced catalytic curing of isocyanates. In Polymer Meeting 15 : Book of Abstracts (pp. 200–200). Polymer Institute of the Slovak Academy of Sciences. ( reposiTUm)

Ableidinger, K., Ehrmann, K., Fitzka, M., Baudis, S., & Liska, R. (2023). Dynamic Thermoplastic Polyurethane Ureas as Self-Reinforcing and Biodegradable Materials. In Polymer Meeting 15 : Book of Abstracts (pp. 107–107). Polymer Institute of the Slovak Academy of Sciences. ( reposiTUm)

Kojic, D., Ehrmann, K., Wolff, R., Mete, Y. D., Koch, T., Stampfl, J., Baudis, S., & Liska, R. (2023). 3D-Printing of Degradable Polyether-esters via Cationic Ring-Opening Polymerization of Spirocyclic Compounds. In RadTech Europe 2023 : Abstract Book (pp. 21–21). http://hdl.handle.net/20.500.12708/192340 ( reposiTUm)

Ehrmann, K., Fitzka, M., Ableidinger, K., Berk, O., Baudis, S., & Liska, R. (2023). Self reinforcing yet biodegradable materials for highly porous prostheses. In IUPAC-Chains 23: Book of abstracts (pp. 99–99). http://hdl.handle.net/20.500.12708/193603 ( reposiTUm)

Fitzka, M., Berk, O., Liska, R., & Baudis, S. (2023). Development of photopolymerizable precursors for self-reinforcing networks for 3D printing. In Polymer Meeting 15 : Book of Abstracts (pp. 104–104). Polymer Institute of the Slovak Academy of Sciences. ( reposiTUm)

Petrovic, M., Dobos, A., Tromayer, M., Lunzer, M., Sayer, S., Markovic, M., Liska, R., & Ovsianikov, A. (2023). Photoresponsive hydrogels for multiphoton biofabrication. In ESB2023 Conference Abstracts (pp. 156–156). ARI Abstracts Periodical. ( reposiTUm)

Mayer, F., Ehrmann, K., & Liska, R. (2023). Interpenetrating Polymer Networks for Hot Litography with High Strentgh and High Toughness. In Polymer Meeting 15 : Book of Abstracts (pp. 71–71). Polymer Institute of the Slovak Academy of Sciences. ( reposiTUm)

Fantoni, A., Lunzer, M., Baudis, S., Ovsianikov, A., & Liska, R. (2023). STIMULI-RESPONSIVE BIOMATERIALS: ENABLING THE SPATIOTEMPORAL MICROPATTERNING OF PHOTORESPONSIVE HYDROGELS VIA DISULFIDE-BASED LINKERS. In Polymer Meeting 15 Book of Abstracts. Polymer Meeting 15, Bratislava, Slovakia. ( reposiTUm)

Mete, Y. D., Wolff, R., Schandl, S., Kojic, D., Klikovits, N., Koch, T., Ehrmann, K., Knaack, P., Stampfl, J., & Liska, R. (2023). New Polymer Materials by Ionic and Catalytic Photopoly-Merization Using Hot Lithography. In Polymer Meeting 15 : Book of Abstracts (pp. 29–29). Polymer Institute of the Slovak Academy of Sciences. ( reposiTUm)

Ruppitsch, L. A., Egger, J., Ehrmann, K., Koch, T., Stampfl, J., & Liska, R. (2023). Supramolecular Upy-Interactions in Photopolymer Networks for Additive Manufacturing. In EUPOC 2023 - Dynamic Polymer Networks : Booklet of Abstracts (pp. 103–103). ( reposiTUm)

Ableidinger, K., & Liska, R. (2023). New Initiation Systems for Step-Growth Photopolymerization. In RadTech Europe Conference and Exhibition 2023 : Abstract Book (pp. 58–58). https://doi.org/10.34726/5487 ( reposiTUm)

Göschl, M., Taschner, R., Koch, T., Wolff, R., Liska, R., & Knaack, P. (2023). High-performance Sulfonium Borate Initiators for Hot Lithography. In RadTech Europe Conference and Exhibition 2023 : Abstract Book (pp. 32–32). http://hdl.handle.net/20.500.12708/192739 ( reposiTUm)

Ableidinger, K., & Liska, R. (2023). Novel Photoinitiator Systems for Step-Growth Polymerization. In Polymer Meeting 15 : Book of Abstracts (pp. 186–186). Polymer Institute of the Slovak Academy of Sciences. ( reposiTUm)

Knaack, P., Koch, T., Wolff, R., & Liska, R. (2023). Hot Lithography of flame-retardant high-performance Polymers. In RadTech Europe Conference and Exhibition 2023 : Abstract Book. RadTech Europe 2023 Conference & Exhibition, München, Germany. http://hdl.handle.net/20.500.12708/193229 ( reposiTUm)

Fantoni, A., Koch, T., Liska, R., & Baudis, S. (2023). Towards High-Performance Thermosets from Renewable Resources: Development of a Sustainable Material Platform using Epoxy-Alcohol Polyaddition. In RadTech Europe Conference and Exhibition 2023 : Abstract Book (pp. 75–75). ( reposiTUm)

Fitzka, M., Simon, Z., Marischler, M., Scheerer, M., Rohr, T., Girolamo, D., Liska, R., & Knaack, P. (2023). Cationic Frontal Polymerization - Fit for Industrial Applications? In RadTech Europe Conference and Exhibition 2023 : Abstract Book (pp. 60–60). http://hdl.handle.net/20.500.12708/193403 ( reposiTUm)

Pieringer, F., Ruppitsch, L. A., Ehrmann, K., Peer, G., Kury, M., Koch, T., Catel, Y., Stampfl, J., Moszner, N., & Liska, R. (2023). Cyclopolimerization as Versatile Tool in Photopolymerization Towards Low Shrinkage Behavior. In Polymer Meeting 15 : Book of Abstracts (pp. 188–188). Polymer Institute of the Slovak Academy of Sciences. http://hdl.handle.net/20.500.12708/192863 ( reposiTUm)

Pieringer, F., Catel, Y., Liska, R., Moszner, N., & Knaack, P. (2023). Group Transfer Polymerization in Bulk Methacrylates. In Polymer Meeting 15 : Book of Abstracts (pp. 98–98). Polymer Institute of the Slovak Academy of Sciences. http://hdl.handle.net/20.500.12708/192898 ( reposiTUm)

Ehrmann, K., Kojic, D., Schandl, S., Wolff, R., Koch, T., Stampfl, J., Eren Mert, T. N., Feist, F., Barner-Kowollik, C., & Liska, R. (2023). Non-Radical Chemistries for Lithographic 3D Printing. In RadTech Europe Conference and Exhibition 2023 : Abstract Book (pp. 20–20). https://doi.org/10.34726/5488 ( reposiTUm)

Mayer, F., Haslinger, C., Leutgeb, L. P., Haas, M., Baudis, S., & Liska, R. (2023). Novel Radical Photoinitiators Based on Germanium with Long Wavelength Absorption for High Curing Depth. In Polymer Meeting 15 : Book of Abstracts (pp. 185–185). Polymer Institute of the Slovak Academy of Sciences. http://hdl.handle.net/20.500.12708/192902 ( reposiTUm)

Ehrmann, K., Fitzka, M., Ableidinger, K., Bergmeister, H., Baudis, S., & Liska, R. (2023). Self-strengthening thermoplastic polyurethanes for highly porous biodegradable small-diameter vascular grafts. In EUPOC 2023 - Dynamic Polymer Networks : Booklet of Abstracts (pp. 58–58). http://hdl.handle.net/20.500.12708/193604 ( reposiTUm)

Steindl, J., Ehrmann, K., Gorsche, C., Huang, C.-C., Koch, T., Steinbauer, P., Rohatschek, A., Andriotis, O. G., Thurner, P. J., Stampfl, J., & Liska, R. (2021). Maleimide-Styrene-Butadiene Terpolymers As Tough Photopolymers For Additive Manufacturing. In vESPS 2021 (p. 92). http://hdl.handle.net/20.500.12708/49586 ( reposiTUm)

Taschner, R., Knaack, P., & Liska, R. (2021). Radical Induced Cationic Frontal Polymerization Of Epoxides Using Bismuthonium-And Pyrylium-Salts. In vESPS 2021 (p. 116). http://hdl.handle.net/20.500.12708/49585 ( reposiTUm)

Ruppitsch, L. A., Peer, G., Ehrmann, K., Koch, B., & Liska, R. (2021). Difunctional Cyclopolymerizable Monomers For Reduced Shrinkage Of Photopolymerizable Networks. In vESPS 2021 (p. 142). http://hdl.handle.net/20.500.12708/49590 ( reposiTUm)

Haslinger, C., Zahoranova, A., Liska, R., & Baudis, S. (2021). Photocrosslinking Of Coumarin-Modified Poly(2-Oxazoline)s. In vESPS 2021 (p. 197). http://hdl.handle.net/20.500.12708/49602 ( reposiTUm)

Göschl, M., Steindl, J., Ehrmann, K., & Liska, R. (2021). Blocked Isocyanate Containing Monomers For Tough Photopolymers. In vESPS 2021 (p. 223). http://hdl.handle.net/20.500.12708/49603 ( reposiTUm)

Wolff, R., Knaack, P., Ehrmann, K., & Liska, R. (2021). 3d Printing Of Pure Phenolic Resins By Hot Lithography. In vESPS 2021 (p. 97). http://hdl.handle.net/20.500.12708/49562 ( reposiTUm)

Steinbauer, P., Sinawehl, L., Liska, R., & Baudis, S. (2021). Photopolymerizable Adhesives For Bone Fracture Fixation. In vESPS 2021 (p. 126). http://hdl.handle.net/20.500.12708/49565 ( reposiTUm)

Schandl, S., Ehrmann, K., Knaack, P., Stampfl, J., & Liska, R. (2021). Polycarbonates 3D-printed via Hot Lithography. In vESPS 2021 (p. 168). http://hdl.handle.net/20.500.12708/50820 ( reposiTUm)

Knaack, P., Taschner, R., Tran, A. D., & Liska, R. (2021). Frontal Polymerization An ongoing trend in cationic polymerization. In vESPS 2021 (p. 81). http://hdl.handle.net/20.500.12708/50814 ( reposiTUm)

Kojic, D., Mete, Y., Knaack, P., Ehrmann, K., Stampfl, J., & Liska, R. (2021). Expanding Spirocyclic Monomers For Hot Lithography Technology. In vESPS 2021 (p. 189). http://hdl.handle.net/20.500.12708/50818 ( reposiTUm)

Ecker, J., Ehrmann, K., & Liska, R. (2021). Debonding On Demand For 3d Printing: A (retro) Diels Alder Reaction For Moderate Crosslinked Photopolymers. In vESPS 2021 (p. 186). http://hdl.handle.net/20.500.12708/50817 ( reposiTUm)

Liska, R., & Stampfl, J. (2021). Hot Lithography: The Bright Fututre of Cationic Photopolymerization. In vESPS 2021 (p. 51). http://hdl.handle.net/20.500.12708/50819 ( reposiTUm)

Steinbauer, P., Kotmel, J., Rohatschek, A., Andriotis, O. G., Liska, R., Thurner, P. J., & Baudis, S. (2021). Single-Molecule Force Spectroscopy Measurement of natural and biomimetic Adhesion Motifs. In 4th International Conference on Biological and Biomimetic Adhesives (p. 66). http://hdl.handle.net/20.500.12708/49635 ( reposiTUm)

Schwarzl, P., Ehrmann, K., Grasl, C., Bergmeister, H., Schima, H., Podesser, B. K., Liska, R., & Baudis, S. (2021). Enhanced Mechanical Properties of Hard-Block Degradable Thermoplastic Polyurethanes for Vascular Tissue Regeneration. In Book of Abstract. TERMIS 6th World Congress, Unknown. http://hdl.handle.net/20.500.12708/49669 ( reposiTUm)

Wottawa, D., Mitterbauer, M., Knaack, P., & Liska, R. (2021). Thermal initiators for cationic frontal polymerization. In vESPS 2021 (p. 117). http://hdl.handle.net/20.500.12708/49640 ( reposiTUm)

Ricke, A., Dellago, B., Ehrmann, K., Liska, R., & Baudis, S. (2021). Photopolymerizable And Degradable Biomaterials Based On Acetal Moieties. In vESPS 2021 (p. 151). http://hdl.handle.net/20.500.12708/49641 ( reposiTUm)

Dellago, B., Orman, S., Liska, R., & Baudis, S. (2021). Toughness- and Degradability Enhancers for Photopolymers as Bone Replacement Materials. In vESPS 2021 (p. 119). http://hdl.handle.net/20.500.12708/49639 ( reposiTUm)

Knaack, P., Taschner, R., & Liska, R. (2021). Cationic Frontalpolymerization. In Polymer Meeting 14 Book of Abstracts (p. 26). Verlag der Technischen Universität Graz. http://hdl.handle.net/20.500.12708/49646 ( reposiTUm)

Taschner, R., Knaack, P., & Liska, R. (2021). Bismuth- and pyrylium-based onium salts as initiators for radical induced cationic frontal polymerization. In C. Slugovc & G. Trimmel (Eds.), Polymer Meeting 14 Book of Abstracts (p. 82). Verlag der Technischen Universität Graz. http://hdl.handle.net/20.500.12708/49649 ( reposiTUm)

Ruppitsch, L. A., Peer, G., Ehrmann, K., Koch, T., & Liska, R. (2021). Difunctional Low Shrinkage Monomers performing Light-Induced Cyclopolymerization. In C. Slugovc & G. Trimmel (Eds.), Polymer Meeting 14 Book of Abstracts (p. 62). Verlag der Technischen Universität Graz. http://hdl.handle.net/20.500.12708/49647 ( reposiTUm)

Steinbauer, P., Sinawehl, L., Liska, R., & Baudis, S. (2021). High-performance photocurable adhesives for bone repair. In C. Slugovc & G. Trimmel (Eds.), Polymer Meeting 14 Book of Abstracts (p. 57). Verlag der Technischen Universität Graz. http://hdl.handle.net/20.500.12708/49650 ( reposiTUm)

Wolff, R., Knaack, P., Ehrmann, K., & Liska, R. (2021). 3D printing of pure phenolic resins by hot lithography. In C. Slugovc & G. Trimmel (Eds.), Polymer Meeting 14 Book of Abstracts (p. 72). Verlag der Technischen Universität Graz. http://hdl.handle.net/20.500.12708/49648 ( reposiTUm)

Steinbauer, P., Orman, S., Hofstetter, C., Schwentenwein, M., Russmüller, G., Stampfl, J., Liska, R., & Baudis, S. (2020). Patient-specific biocompatible polymer scaffolds for bone tissue regeneration. In 2020 TERMIS EU Abstracts (p. 308). e Cells und Materials. http://hdl.handle.net/20.500.12708/50786 ( reposiTUm)

Ehrmann, K., Grasl, C., Bergmeister, H., Schima, H., Podesser, B. K., Liska, R., & Baudis, S. (2020). Reconciling Contradicting Properties: Strong Biodegradable Thermoplastic Polyurethanes for Electrospun Small-Diameter Vascular Grafts. In 11th World Biomaterials Congress (p. 1). 11th World Biomaterials Congress. http://hdl.handle.net/20.500.12708/50807 ( reposiTUm)

Ehrmann, K., Grasl, C., Schima, H., Baudis, S., Liska, R., Podesser, B. K., & Bergmeister, H. (2020). Bottom-up design of materials boosts long term performance of small-diameter biodegradable vascular prostheses: an in-vivo proof. In ESSR 2020 (p. 1). http://hdl.handle.net/20.500.12708/49633 ( reposiTUm)

Steinbauer, P., Orman, S., Hofstetter, C., Schwentenwein, M., Russmüller, G., Stampfl, J., Liska, R., & Baudis, S. (2020). Biocompatible photopolymer scaffolds tailored for patient specific solutions for bone tissue regeneration. In 11th World Biomaterials Congress (p. 1). http://hdl.handle.net/20.500.12708/49621 ( reposiTUm)

Reichsöllner, R., Orman, S., Hofstetter, C., Schwentenwein, M., Russmüller, G., Stampfl, J., Liska, R., & Baudis, S. (2019). 3D-printed, tough and biocompatible photopolymers for in vivo bone tissue regeneration. In Termis EU 2019 (p. 1625). http://hdl.handle.net/20.500.12708/50483 ( reposiTUm)

Tran, A. D., Knaack, P., Klikovits, N., & Liska, R. (2019). Radical induced cationic frontal polymerizationfor epoxy-composites. In ICCST 12th International Conference on Composite Science and Technology (p. 53). http://hdl.handle.net/20.500.12708/50482 ( reposiTUm)

Kury, M., Peer, G., Seidler, K., Gorsche, C., Gauss, P., Koch, T., Dorfinger, P., Stampfl, J., & Liska, R. (2019). Toughening photoploymers by means of addition-fragmentation chain transfer reagents for 3D printing. In European Polymer Congress 2019 (EPF 2019) (p. 762). http://hdl.handle.net/20.500.12708/50486 ( reposiTUm)

Svajdlenková, H., Sausa, O., Peer, G., Gorsche, C., & Liska, R. (2019). Insight into microstructure of photopolymers by means of positron annihilation lifetime spectroscopy (PALS). In European Polymer Congress 2019 (EPF 2019) (p. 405). http://hdl.handle.net/20.500.12708/50487 ( reposiTUm)

Taschner, R., Gauss, P., Knaack, P., & Liska, R. (2019). α-Ketoesters as non-aromatic photoinitiators for radical polymerization of (meth)acrylates. In European Polymer Congress 2019 (EPF 2019) (p. 468). http://hdl.handle.net/20.500.12708/50489 ( reposiTUm)

Steinbauer, P., Rohatschek, A., Andriotis, O. G., Thurner, P. J., Liska, R., & Baudis, S. (2019). Adhesion Forces of selected Bone-binding Motifs determined via Single Molecule Force Spectroscopy. In Termis Eu 2019 (p. 1248). http://hdl.handle.net/20.500.12708/50495 ( reposiTUm)

Helfert, S., Hellmeier, J., Sevcsik, E., Liska, R., & Baudis, S. (2019). Tailor-made biointerfaces on oxidic substrates via polymer brushes. In Termis EU 2019 (p. 1338). http://hdl.handle.net/20.500.12708/50496 ( reposiTUm)

Schörpf, S., Catel, Y., Moszner, N., Gorsche, C., & Liska, R. (2019). Shrinkage stress reduction of polymerizing networksvia combination of vinylcyclopropanes withaddition fragmentation chain transfer. In RadTech Europe 2019 (p. 70). http://hdl.handle.net/20.500.12708/50534 ( reposiTUm)

Hofecker, A., Orman, S., Knaack, P., Baudis, S., & Liska, R. (2019). Low toxic monomers for 3D printing photopolymer-based bone substitutes. In European Polymer Congress 2019 (EPF 2019) (p. 848). http://hdl.handle.net/20.500.12708/50492 ( reposiTUm)

Mete, Y., Tran, A. D., Klikovits, N., Bomze, D., Knaack, P., & Liska, R. (2019). Cationic Photopolymerization - Innovative Photoinitiators and their application for Bio-based Monomers and Frontal Polymerization. In European Polymer Congress 2019 (EPF 2019) (p. 114). http://hdl.handle.net/20.500.12708/50491 ( reposiTUm)

Ehrmann, K., Grasl, C., Bergmeister, H., Schima, H., Podesser, B. K., Liska, R., & Baudis, S. (2019). Modular Design Principle for Personalized Artificial Vascular Grafts with Tunable Mechanical Properties and Degradation Speeds. In Termis EU 2019 (p. 1112). http://hdl.handle.net/20.500.12708/50494 ( reposiTUm)

Mete, Y., Tran, A. D., Klikovits, N., Knaack, P., & Liska, R. (2019). UV-Induced Bulk Curing of Epoxy Composites. In RadTech Europe 2019 (p. 11). http://hdl.handle.net/20.500.12708/50543 ( reposiTUm)

Peer, G., Eibel, A., Gorsche, C., Catel, Y., Gescheidt, G., Moszner, N., & Liska, R. (2019). Network regulation of dimethacrylates via ester-activated vinyl ethers. In Radtech Europe 2019 (p. 68). http://hdl.handle.net/20.500.12708/50544 ( reposiTUm)

Taschner, R., Gauss, P., Knaack, P., & Liska, R. (2019). α-Ketoesters as non-aromatic photoinitiators for radical polymerization of (meth)acrylates. In RadTech Europe 2019 (p. 62). http://hdl.handle.net/20.500.12708/50546 ( reposiTUm)

Knaack, P., Bomze, D., Gauss, P., Mitterbauer, M., & Liska, R. (2019). Latest Photoinitiator Developments. In European Coatings Show Journal 2019 (p. 90). European Coatings Journal 2019. http://hdl.handle.net/20.500.12708/50445 ( reposiTUm)

Klikovits, N., Knaack, P., & Liska, R. (2019). Novel photopolymers by UV-induced Cationic Ring Opening Polymerization. In RadTech Europe 2019 (p. 51). http://hdl.handle.net/20.500.12708/50547 ( reposiTUm)

Tran, A. D., Knaack, P., Klikovits, N., & Liska, R. (2019). Radical Induced Cationic Frontal Polymerization of Epoxy System. In Tagungsband_VSS2019_1906042202 (pp. 202–203). http://hdl.handle.net/20.500.12708/50714 ( reposiTUm)

Dellago, B., Liska, R., & Baudis, S. (2019). Acetal Moieties as Biodegradable Functionality in Photopolymers for Bone Regeneration. In Tagungsband_VSS2019_1906042202 (pp. 120–121). http://hdl.handle.net/20.500.12708/50713 ( reposiTUm)

Lunzer, M., Shi, L., Andriotis, O. G., Gruber, P., Markovic, M., Thurner, P. J., Ossipov, D., Liska, R., & Ovsianikov, A. (2019). Micromechanical Analysis Of Photolabile Hydrogels Micropatterned By Multiphoton Lithography. In Book of Abstracts of the 25th Congress of the European Society of Biomechanics (p. 32). TU Verlag. http://hdl.handle.net/20.500.12708/68087 ( reposiTUm)

Ovsianikov, A., Tromayer, M., Dobos, A., Gruber, P., Markovic, M., Rosspeintner, A., Vauthey, E., Redl, H., & Liska, R. (2019). Micropattering of Hydrogels by Means of Multiphoton Lithography. In International Symposium on SSS Laser Processing. International Symposium on SSS Laser Processing (3S-LP), Keio University, Yokohama, Japan. Abstract book. http://hdl.handle.net/20.500.12708/68058 ( reposiTUm)

Steinbauer, P., Rohatschek, A., Andriotis, O. G., Liska, R., Thurner, P. J., & Baudis, S. (2018). Adhesion motifs for bone glue applications. In Austrian Bone Conference - ABC 2018 (p. 454). Wiener Medizinische Wochenschrift; Springer-Verlag Austria. http://hdl.handle.net/20.500.12708/49568 ( reposiTUm)

Ehrmann, K., Seidler, K., Potzmann, P., Dworak, C., Koch, T., Bergmeister, H., Grasl, C., Schima, H., Liska, R., Podesser, B. K., & Baudis, S. (2018). Thermopastic Polyurethanes and their Application as Electrospun Biodegradable Soft Tissue Medical Prosthesis. In VSS 2018 (pp. 110–111). Book-of-Abstracts.com. http://hdl.handle.net/20.500.12708/50178 ( reposiTUm)

Zerobin, E., Steiger, W., Markovic, M., Baudis, S., Ovsianikov, A., & Liska, R. (2018). Molecular Design Towards Novel Photo-Initiators with Increased Two-Photon Absorption Cross Section. In VSS 2018 (pp. 106–107). Book-of-Abstracts.com. http://hdl.handle.net/20.500.12708/50177 ( reposiTUm)

Steinbauer, P., Rohatschek, A., Andriotis, O. G., Baudis, S., Thurner, P. J., & Liska, R. (2018). Raft Polymers as Adhesion Motifs for Bone Glue Applications. In VSS 2018 (pp. 108–109). Book-of-Abstracts.com. http://hdl.handle.net/20.500.12708/50175 ( reposiTUm)

Helfert, S., Hellmeier, J., Sevcsik, E., Liska, R., & Baudis, S. (2018). Tailor-made Polymer Interfaces - Surfaces on Demand. In VSS 2018 (pp. 84–85). Book-of-Abstracts.com. http://hdl.handle.net/20.500.12708/50176 ( reposiTUm)

Orman, S., Hofstetter, C., Reinauer, F., Aksu, A., Liska, R., & Baudis, S. (2018). PCL based toughness enhancers for photopolymer based bone substitutes. In 5th European Symposium of Photopolymer Science (p. 10). 5th European Symposium of Photopolymer Science. http://hdl.handle.net/20.500.12708/50273 ( reposiTUm)

Klikovits, N., Tran, A. D., Knaack, P., & Liska, R. (2018). Advances in cationic photopolymerization based on alkoxyaluminate photoacid generators. In 5th European Symposium of Photopolymer Science (p. PO16). 5th European Symposium of Photopolymer Science. http://hdl.handle.net/20.500.12708/50303 ( reposiTUm)

Schörpf, S., Catel, Y., Moszner, N., Gorsche, C., & Liska, R. (2018). Reduction of polymerization-induced shrinkage stress via combination of radical ring opening and addition fragmentation chain transfer. In 5th European Symposium of Photopolymer Science (p. 13). 5th European Symposium of Photopolymer Science. http://hdl.handle.net/20.500.12708/50274 ( reposiTUm)

Peer, G., Koch, T., Gorsche, C., & Liska, R. (2018). New monomers for photopolymerization based on radical cyclopolymerization. In 5th European Symposium of Photopolymer Science (p. 13). 5th European Symposium of Photopolymer Science. http://hdl.handle.net/20.500.12708/50275 ( reposiTUm)

Knaack, P., Tran, A. D., Klikovits, N., & Liska, R. (2018). Frontal polymerization. In 5th European Symposium of Photopolymer Science (p. P17). 5th European Symposium of Photopolymer Science. http://hdl.handle.net/20.500.12708/50281 ( reposiTUm)

Lamparth, I., Fischer, U. K., Radebner, J., Haas, M., Mitterbauer, M., Liska, R., Stüger, H., & Moszner, N. (2018). Photoinitiating Efficiency of Visible Light Initiators Based on Tetraacyl Derivatives of Germanium and Tin. In 5th European Symposium of Photopolymer Science (p. PO21). 5th European Symposium of Photopolymer Science. http://hdl.handle.net/20.500.12708/50337 ( reposiTUm)

Lunzer, M., Shi, L., Andriotis, O. G., Gruber, P., Markovic, M., Thurner, P. J., Ossipov, D., Liska, R., & Ovsianikov, A. (2018). Two-Photon Micropatterning of a Photolabile Hydrogel Using a Two-Photon Sensitizer. In BSTE 2018: Next Generation Tissue Engineering (p. PO18). http://hdl.handle.net/20.500.12708/50324 ( reposiTUm)

Zerobin, E., Tromayer, M., Dobos, A., Steiger, W., Markovic, M., Baudis, S., Ovsianikov, A., & Liska, R. (2018). Promoting Initiation-Efficiency and Biocompatibility of Two-Photon Initiators by the Introduction of Photolabile Moieties. In BSTE 2018: Next Generation Tissue Engineering (p. PO43). http://hdl.handle.net/20.500.12708/50323 ( reposiTUm)

Lunzer, M., Shi, L., Gruber, P., Markovic, M., Ossipov, D., Liska, R., & Ovsianikov, A. (2018). A Modular Approach to Sensitized Two-Photon Micropatterning of Photolabile Hydrogels. In Micro- and Nanostructured Biointerfaces (p. PO17). http://hdl.handle.net/20.500.12708/50322 ( reposiTUm)

Mete, Y., Grunenberg, D., Steyrer, B., Stampfl, J., Gorsche, C., & Liska, R. (2018). A Heterotelechelic Oligomer for Tough Photopolymersvia Hot Lithography. In 5th European Symposium of Photopolymer Science (p. P26). 5th European Symposium of Photopolymer Science. http://hdl.handle.net/20.500.12708/50287 ( reposiTUm)

Gauss, P., Knaack, P., & Liska, R. (2018). Replacing aromatic type II photoinitiators with aliphatic compounds. In 5th European Symposium of Photopolymer Science (p. P9). 5th European Symposium of Photopolymer Science. http://hdl.handle.net/20.500.12708/50318 ( reposiTUm)

Zerobin, E., Tromayer, M., Dobos, A., Steiger, W., Markovic, M., Baudis, S., Ovsianikov, A., & Liska, R. (2018). Molecular Design towards Two-Photon Initiators with Reduced Phototoxicity. In 5th European Symposium of Photopolymer Science (p. P50). 5th European Symposium of Photopolymer Science. http://hdl.handle.net/20.500.12708/50316 ( reposiTUm)

Mitterbauer, M., Knaack, P., Naumov, S., Markovic, M., Ovsianikov, A., Moszner, N., & Liska, R. (2018). A novel highly reactive Sn-based Type I photoinitiator with excellent photobleaching behavior for long wavelength curing applications. In 5th European Symposium of Photopolymer Science (p. P28). 5th European Symposium of Photopolymer Science. http://hdl.handle.net/20.500.12708/50317 ( reposiTUm)

Tran, A. D., Klikovits, N., Knaack, P., & Liska, R. (2018). Radical induced cationic frontal polymerization for epoxy-composites. In 5th European Symposium of Photopolymer Science (p. PO47). 5th European Symposium of Photopolymer Science. http://hdl.handle.net/20.500.12708/50302 ( reposiTUm)

Hofecker, A., Knaack, P., Markovic, M., Koch, T., Ovsianikov, A., & Liska, R. (2018). New Approaches for the Synthesis of low toxic Monomers. In 5th European Symposium of Photopolymer Science (p. PO12). 5th European Symposium of Photopolymer Science. http://hdl.handle.net/20.500.12708/50295 ( reposiTUm)

Schnöll, C., Gorsche, C., Koch, T., Moszner, N., & Liska, R. (2018). Introducing Debonding on Demand within highly Cross-Linked Photopolymers. In 5th European Symposium of Photopolymer Science (p. PO42). 5th European Symposium of Photopolymer Science. http://hdl.handle.net/20.500.12708/50294 ( reposiTUm)

Lunzer, M., Shi, L., Gruber, P., Markovic, M., Ossipov, D., Ovsianikov, A., & Liska, R. (2018). Promoted two-photon micropatterning of biocompatible material. In 5th European Symposium of Photopolymer Science (p. P23). 5th European Symposium of Photopolymer Science. http://hdl.handle.net/20.500.12708/50282 ( reposiTUm)

Kury, M., Koch, T., Gorsche, C., & Liska, R. (2018). Investigation of diacrylate-based cyclopolymerizable monomers in photopolymerization. In 5th ESPS 2018 (p. P19). 5th European Symposium of Photopolymer Science. http://hdl.handle.net/20.500.12708/50286 ( reposiTUm)

Lunzer, M., Shi, L., Gruber, P., Markovic, M., Ossipov, D., Liska, R., & Ovsianikov, A. (2018). Sensitized Two-Photon Micropatterning in Presence of Cells. In International Conference of Biofabricaton 2018 Würzburg (p. 42). http://hdl.handle.net/20.500.12708/50267 ( reposiTUm)

Liska, R. (2018). Advanced photoinitiators for coatings, biomaterials and 3D printing. In 5th European Symposium of Photopolymer Science (p. 9). 5th European Symposium of Photopolymer Science. http://hdl.handle.net/20.500.12708/50269 ( reposiTUm)

Steiger, W., Gruber, P., Tromayer, M., Dobos, A., Lunzer, M., Liska, R., & Ovsianikov, A. (2018). Fully automated z-scan setup based on a tunable fs-oscillator. In Proceedings of SPIE Vol. 10492. SPIE Photonics West 2018, San Francisco, United States of America (the). SPI Digital Library. http://hdl.handle.net/20.500.12708/67862 ( reposiTUm)

Dobos, A., Gruber, P., Tromayer, M., Steiger, W., Van Hoorick, J., van Vlierberghe, S., Liska, R., & Ovsianikov, A. (2018). Laser-based 3D printing of hydrogels: a versatille appoach for accurate 3D cellular modles. In Abstract Book (p. 261). http://hdl.handle.net/20.500.12708/67842 ( reposiTUm)

Mitterbauer, M., Bomze, D., Klikovits, N., Tran, A. D., Knaack, P., & Liska, R. (2018). A novel cationic photoinitiator and its application in frontal polymerization. In ISPS 2018 (p. 18). International Symposium of Photopolymer Science. http://hdl.handle.net/20.500.12708/50151 ( reposiTUm)

Sangermano, M., Liska, R., & Klikovits, N. (2018). Successful UV-Curing of epoxy composites. In 255th ACS National Meeting & Exposition (p. POLY-40). American Chemical Society Washington, D. C. http://hdl.handle.net/20.500.12708/50148 ( reposiTUm)

Stanic, S. D., Altun, A. A., Reicharlzeder, D., Schwentenwein, M., Baudis, S., Stampfl, J., & Liska, R. (2017). Highly Filled Hydrogels as Biocomposites and Ceramic Precursors for 3D Printing Aplications. In Danube Vltava Sava Polymer Meeting 2017 (p. PO-24). Book of Abstracts.com. http://hdl.handle.net/20.500.12708/49897 ( reposiTUm)

Vojtova, L., Habankova, E., Michlovska, L., Liska, R., Jancar, J., & Baudis, S. (2017). Hybrid Hydrogel’s Network Formed by Photogelation of Thermosensitive Macromonomer in Aquateous Environment. In Danube Vltava Sava Polymer Meeting 2017 (p. PO-28). Book of Abstracts.com. http://hdl.handle.net/20.500.12708/49899 ( reposiTUm)

Steinbauer, P., Dworak, C., Thurner, P. J., Andriotis, O. G., & Liska, R. (2017). Phosporus-Based Raft Polymers for Bio Adhesion. In Danube Vltava Sava Polymer Meeting 2017 (p. PO-25). Book of Abstracts.com. http://hdl.handle.net/20.500.12708/49898 ( reposiTUm)

Heinze, M., Pospiech, D., Voit, B., Baudis, S., Liska, R., Naumova, A., & Saalwächter, K. (2017). Influence of Preparation Conditions on the Structure of Photocrosslinked Solvogels. In Danube Vltava Sava Polymer Meeting 2017 (p. PO-36). Book of Abstracts.com. http://hdl.handle.net/20.500.12708/49900 ( reposiTUm)

Knaack, P., Bomze, D., Kern, W., & Liska, R. (2017). Radical Induced Cationic Frontal Polymerization of Epoxy Resins. In Danube Vltava Sava Polymer Meeting 2017 (p. OP-86). Book of Abstracts.com. http://hdl.handle.net/20.500.12708/49918 ( reposiTUm)

Svajdlenková, H., Sausa, O., Selvek, M., Koch, T., Gorsche, C., & Liska, R. (2017). Free Volume Study of Dimethacrylates by PALS. In Danube Vltava Sava Polymer Meeting 2017 (p. OP-73). Book of Abstracts.com. http://hdl.handle.net/20.500.12708/49917 ( reposiTUm)

Reichsöllner, R., Qin, X., Labuda, K., Chen, J., Hruschka, V., Khadem, A., Baudis, S., Liska, R., Redl, H., & Slezak, P. (2017). Novel, Bio-Compatible Peptide-Conjugates for Hemostasis. In Danube Vltava Sava Polymer Meeting 2017 (p. PO-89). Book of Abstracts.com. http://hdl.handle.net/20.500.12708/49906 ( reposiTUm)

Gauss, P., Knaack, P., & Liska, R. (2017). Silycyclohexadiens as Anti Oxygen Inhibition and Chain Transfer Reagents. In Danube Vltava Sava Polymer Meeting 2017 (p. PO-79). Book of Abstracts.com. http://hdl.handle.net/20.500.12708/49905 ( reposiTUm)

Schnöll, C., Gorsche, C., Koch, T., Moszner, N., & Liska, R. (2017). Introducing Highly Crosslinked Photopolymers with Debonding on Demand Properties. In Danube Vltava Sava Polymer Meeting 2017 (p. OP-6). Book of Abstracts.com. http://hdl.handle.net/20.500.12708/49910 ( reposiTUm)

Helfert, S., Dworak, C., Sevcsik, E., Peterlik, H., Sauer, M., Ret, D., & Liska, R. (2017). Design and Synthesis of Tailor-made Nanostructured Polymer Biointerfaces. In Danube Vltava Sava Polymer Meeting 2017 (p. OP-11). Book of Abstracts.com. http://hdl.handle.net/20.500.12708/49911 ( reposiTUm)

Baudis, S., Zerobin, E., Lunzer, M., Tomasikova, Z., Qin, X., Markovic, M., Gruber, P., Stampfl, J., Ovsianikov, A., & Liska, R. (2017). Microfabricated Biocompatible Hydrogels. In VSS 2017 (p. 11). http://hdl.handle.net/20.500.12708/49862 ( reposiTUm)

Liske, O., Dorfinger, P., Gmeiner, R., Baudis, S., Stampfl, J., Liska, R., & Knaus, S. (2017). UV Curable Materials from Tailored Lignin (Meth)Acrylates. In Danube Vltava Sava Polymer Meeting 2017 (p. PO-19). Book of Abstracts.com. http://hdl.handle.net/20.500.12708/49896 ( reposiTUm)

Lunzer, M., Ossipov, D., Gruber, P., Hölzl, K., Markovic, M., Ovsianikov, A., & Liska, R. (2017). Micropatterning of Hydrogels by Sensitized Two-Photon Cleavage of o-Nitrobenzyl Crosslinkages. In Danube Vltava Sava Polymer Meeting 2017 (p. OP-33). Book of Abstracts.com. http://hdl.handle.net/20.500.12708/49915 ( reposiTUm)

Gorsche, C., Reghunathan, H., Baudis, S., Knaack, P., Husar, B., Laeuger, J., Hoffmann, H., & Liska, R. (2017). Real Time Monitoring of Photopolymerization Reactions via NIR/MIR-Photorheology. In Danube Vltava Sava Polymer Meeting 2017 (p. OP-72). Book of Abstracts.com. http://hdl.handle.net/20.500.12708/49916 ( reposiTUm)

Orman, S., Gorsche, C., Hofstetter, C., Baudis, S., Stampfl, J., & Liska, R. (2017). Photorheometer with RT-FTIR Coupling as Innovativ Tool to Assess Photopolymers for 3D Printing. In Danube Vltava Sava Polymer Meeting 2017 (p. PO 44). Book of Abstracts. http://hdl.handle.net/20.500.12708/49893 ( reposiTUm)

Baudis, S., Bergmeister, H., Ehrmann, K., Dworak, C., Grasl, C., & Liska, R. (2017). Enhancement of Mechanical Properties of Biogradable Thermoplastic Polyurethane Polymers for Their Application as Artificial Blood Vessel. In Danube Vltava Sava Polymer Meeting 2017 (p. PO-7). Book of Abstracts.com. http://hdl.handle.net/20.500.12708/49894 ( reposiTUm)

Baudis, S., Ovsianikov, A., Stampfl, J., & Liska, R. (2017). 3D Printed Biocompatible Polymers. In Danube Vltava Sava Polymer Meeting 2017 (p. OP-30). Book of Abstracts.com. http://hdl.handle.net/20.500.12708/49912 ( reposiTUm)

Zerobin, E., Tromayer, M., Gruber, P., Markovic, M., Baudis, S., Stampfl, J., Ovsianikov, A., & Liska, R. (2017). Two-Photon Initiator Development and Hydrogel Networks Based on Hyaluronic Acid. In Danube Vltava Sava Polymer Meeting 2017 (p. OP-32). Book of Abstracts.com. http://hdl.handle.net/20.500.12708/49913 ( reposiTUm)

Mitterbauer, M., Knaack, P., Haas, M., Stüger, H., Moszner, N., & Liska, R. (2017). Tetrakis(2,4,6-trimethylbenzoyl)silane as photoinitiator in visible light dental curing. In Danube Vltava Sava Polymer Meeting 2017 (p. PO-76). Book of Abstracts.com. http://hdl.handle.net/20.500.12708/49904 ( reposiTUm)

Mete, Y., Knaack, P., Schwentenwein, M., Strehmel, B., & Liska, R. (2017). NIR-initiated photopolymerization for lithography-based ceramic manufacturing. In Danube Vltava Sava Polymer Meeting 2017 (p. PO-75). Book of Abstracts.com. http://hdl.handle.net/20.500.12708/49903 ( reposiTUm)

Kury, M., Seidler, K., Gauss, P., Dorfinger, P., Koch, T., Stampfl, J., Gorsche, C., & Liska, R. (2017). Modification of (Meth)Acrylate-Based Photopolymer Networks Using Addition-Fragmentation Chain Transfer Reagents. In Danube Vltava Sava Polymer Meeting 2017 (p. OP-90). Book of Abstracts.com. http://hdl.handle.net/20.500.12708/49921 ( reposiTUm)

Grunenberg, D., Gorsche, C., & Liska, R. (2017). Toughening Photopolymers: The Concept of Hybrid Oligomers. In Danube Vltava Sava Polymer Meeting 2017 (p. OP-91). Book of Abstracts.com. http://hdl.handle.net/20.500.12708/49924 ( reposiTUm)

Baudis, S., Zerobin, E., Lunzer, M., Tromayer, M., Markovic, M., Gruber, P., Stampfl, J., Ovsianikov, A., & Liska, R. (2017). Macromolecular Photochemistry: A Toolbox to Control the Micro-Environment of Cells. In 17. Österreichische Chemietage 2017 (p. OP-29). http://hdl.handle.net/20.500.12708/49925 ( reposiTUm)

Klikovits, N., Knaack, P., Bomze, D., Krossing, I., & Liska, R. (2017). Novel photoacid generator for cationic photopolymerization. In Danube Vltava Sava Polymer Meeting 2017 (p. OP-87). Book of Abstracts.com. http://hdl.handle.net/20.500.12708/49929 ( reposiTUm)

Schörpf, S., Gorsche, C., Catel, Y., Moszner, N., & Liska, R. (2017). Urethane-based vinylcyclopropanes (VCPs) for low shrinkage dental composites. In DVSPM 2017 (p. PO66). http://hdl.handle.net/20.500.12708/50015 ( reposiTUm)

Gruber, P., Markovic, M., Kain, L., Andriotis, O. G., Tromayer, M., Dubruel, P., van Vlierberghe, S., Thurner, P. J., Liska, R., & Ovsianikov, A. (2017). Stiffness Guided Cell Migration in 3D Hydrogels via Multiphoton Grafting. In Donau Vltava Sava Polymer Meeting 2017 (p. PO-8). Book of Abstract. http://hdl.handle.net/20.500.12708/67682 ( reposiTUm)

Dobos, A., Tromayer, M., Gruber, P., Van Hoorick, J., van Vlierberghe, S., Dubruel, P., Liska, R., & Ovsianikov, A. (2017). Comparason of the effect of photoinitiator P2CK and AS7 on the Viablitiy of Encapsulated Human Adipose-Derivet Stem Cells via Two-Photon Polymerization. In Donau Vltava Sava Polymer Meeting 2017 (p. PO-5). Book of Abstract. http://hdl.handle.net/20.500.12708/67681 ( reposiTUm)

Steiger, W., Gruber, P., Tromayer, M., Lunzer, M., Ajami, A., Husinsky, W., Liska, R., & Ovsianikov, A. (2017). Fully Automated Z-scan Setup Based on a Tunable FS-Oscillator. In Danube Vltava Sava Polymer Meeting (p. OP-102). http://hdl.handle.net/20.500.12708/67680 ( reposiTUm)

Markovic, M., Van Hoorick, J., Hölzl, K., Tromayer, M., van Vlierberghe, S., Dubruel, P., Liska, R., & Ovsianikov, A. (2017). Encapsulation oh Human Adipose-Derived Stem Cells in Gelatin-Methacrylate Based Hydrogel for Tissue Engineering Applications. In M. Markovic, J. Van Hoorick, K. Hölzl, M. Tromayer, S. Van Vlierberghe, P. Dubruel, R. Liska, & A. Ovsianikov (Eds.), Donau Vltava Sava Polymer Meeting 2017 (p. PO-21). Book of Abstract. http://hdl.handle.net/20.500.12708/67685 ( reposiTUm)

Mandt, D., Gruber, P., Markovic, M., Tromayer, M., Rothbauer, M., Kratz, S., Van Hoorick, J., Dubruel, P., van Vlierberghe, S., Ertl, P., Liska, R., & Ovsianikov, A. (2017). 3D Printed Hydrogels for microfluidici Barrier Models. In Donau Vltava Sava Polymer Meeting 2017 (p. PO-20). Book of Abstract. http://hdl.handle.net/20.500.12708/67684 ( reposiTUm)

Hölzl, K., Van Hoorick, J., van Vlierberghe, S., Dubruel, P., Liska, R., Redl, H., Nürnberger, S., & Ovsianikov, A. (2017). Photosensitive Gelatin-Methacrylamide in 3D cell culture. In Donau Vltava Sava Polymer Meeting 2017 (p. PO-13). Book of Abstract. http://hdl.handle.net/20.500.12708/67683 ( reposiTUm)

Steyrer, B., Liska, R., & Stampfl, J. (2017). Thermoplasts as Toughening Agent for 3D-Printable Photopolymers. In Danube Vltava Sava Polymer Meeting 2017 DVSPM (p. OP-4). Book-of-Abstracts.com. http://hdl.handle.net/20.500.12708/67648 ( reposiTUm)

Lunzer, M., Gruber, P., Hölzl, K., Tromayer, M., Markovic, M., Ossipov, D., Ovsianikov, A., & Liska, R. (2017). Advances in Two-Photon Initiation Based 3D Printing for Biological Applications. In RadTech EuropeConference & Exhibition 2017 (p. 40). http://hdl.handle.net/20.500.12708/49947 ( reposiTUm)

Liske, O., Dorfinger, P., Gmeiner, R., Baudis, S., Stampfl, J., Liska, R., & Knaus, S. (2017). UV curable materials for 3D printing based on renewable resources. In RadTech Europe Conference & Exhibition 2017 (p. 71). http://hdl.handle.net/20.500.12708/49946 ( reposiTUm)

Gorsche, C., Reghunathan, H., Baudis, S., Knaack, P., Husar, B., Laeuger, J., Hoffmann, H., & Liska, R. (2017). In situ investigation of photopolymerization reactions via real time-NIR/MIR-photorheology. In RadTech Europe Conference & Exhibition 2017 (p. 11). http://hdl.handle.net/20.500.12708/49948 ( reposiTUm)

Knaack, P., Bomze, D., Klikovits, N., Krossing, I., & Liska, R. (2017). New cationic Initiators and Frontal Polymerization. In RadTech Europe Conference & Exhibition 2017 (p. 41). http://hdl.handle.net/20.500.12708/49953 ( reposiTUm)

Grunenberg, D., Gorsche, C., & Liska, R. (2017). Tough Hyperbranched Polymers via Photopolymerization of Hybrid Oligomers. In RadTech Europe Conference & Exhibition 2017 (p. 86). http://hdl.handle.net/20.500.12708/49952 ( reposiTUm)

Klikovits, N., Knaack, P., Bomze, D., Krossing, I., & Liska, R. (2017). Novel Alkoxyaluminate-based Cationic Photoinitiators. In RadTech Europe Conference & Exhibition 2017 (p. 89). http://hdl.handle.net/20.500.12708/49958 ( reposiTUm)

Kury, M., Seidler, K., Dorfinger, P., Koch, T., Stampfl, J., Gorsche, C., & Liska, R. (2017). Toughening of photopolymer Networks using Addition-fragmentation chain transfer Reagents. In Rad Tech Europe Conference & Exhibition 2017 (p. 13). http://hdl.handle.net/20.500.12708/49954 ( reposiTUm)

Schnöll, C., Gorsche, C., Koch, T., Moszner, N., & Liska, R. (2017). Debonding on demand: irreversible approach via thermally induced gas formation & network regulation. In RadTech Europe Conference & Exhibition 2017 (p. 51). http://hdl.handle.net/20.500.12708/49956 ( reposiTUm)

Gauss, P., Knaack, P., & Liska, R. (2017). Substituted Cyclohexadienes as Hydrogen Donor in Radical Photopolymerization. In RadTech Europe Conference & Exhibition 2017 (p. 87). http://hdl.handle.net/20.500.12708/49957 ( reposiTUm)

Zerobin, E., Tromayer, M., Gruber, P., Markovic, M., Baudis, S., Stampfl, J., Ovsianikov, A., & Liska, R. (2017). Newly Developed Hydrogel Precursors and Two-Photon Initiators Based on Hyaluronic Acid. In AMBA 2017, Advanced Materials for Biomedical Applications (p. 62). http://hdl.handle.net/20.500.12708/49908 ( reposiTUm)

Stanic, S. D., Baudis, S., Schwentenwein, M., & Liska, R. (2017). 3D printing of filled hydrogels as ceramic precursors and biocomposites. In Bypos Workshop Book 2017 (p. 31). http://hdl.handle.net/20.500.12708/49880 ( reposiTUm)

Gorsche, C., Seidler, K., Kury, M., Steindl, J., Dorfinger, P., Stampfl, J., Moszner, N., & Liska, R. (2017). The power of chain transfer in the field of photopolymer applications. In Advanced Polymers via Macromolecular Engineering (p. 143). Advanced Polymers via Macromolecular Engineering. http://hdl.handle.net/20.500.12708/49796 ( reposiTUm)

Liske, O., Dorfinger, P., Gmeiner, R., Baudis, S., Stampfl, J., Liska, R., & Knaus, S. (2017). Modification of Wheat Straw Soda Lignin for Light-Induced Radical Polymerization Process. In Bypos Workshop Book 2017 (p. 55). http://hdl.handle.net/20.500.12708/49859 ( reposiTUm)

Baudis, S., Zerobin, E., Lunzer, M., Tromayer, M., Markovic, M., Gruber, P., Stampfl, J., Ovsianikov, A., & Liska, R. (2017). Controlling the Micro-Environment of Cells by Exploitation of Macromolecular Photochemistry. In Advanced Polymers via Macromolecular Engineering (p. 91). http://hdl.handle.net/20.500.12708/49811 ( reposiTUm)

Helfert, S., Dworak, C., Sevcsik, E., Peterlik, H., Sauer, M., Ret, D., & Liska, R. (2017). Synthesis and Characterization of Polymer Linker systems for T-cell activation. In Advanced Polymers via Macromolecular Engineering (p. 133). http://hdl.handle.net/20.500.12708/49801 ( reposiTUm)

Knaack, P., Bomze, D., Krossing, I., & Liska, R. (2017). Progress in Cationic Photopolymerization. In European Coatings Journal 04-2017 (p. 102). Vincentz Network GmbH & Co. KG, Hannover (Deutschland). http://hdl.handle.net/20.500.12708/49774 ( reposiTUm)

Seidler, K., Gauss, P., Kury, M., Harakaly, G., Griesser, M., Koch, T., Stampfl, J., Gorsche, C., Moszner, N., & Liska, R. (2017). Tough and low shrinkage photopolymers. In European Coatings Journal 04-2017 (p. 96). Vincentz Network GmbH & Co. KG, Hannover (Deutschland). http://hdl.handle.net/20.500.12708/49773 ( reposiTUm)

Helfert, S., Dworak, C., Sevcsik, E., Peterlik, H., Ret, D., Sauer, M., & Liska, R. (2017). Synthesis and Characterization of Polymer Linker Systems for Cell Studies. In Bypos Workshop Book 2017 (p. 29). http://hdl.handle.net/20.500.12708/49861 ( reposiTUm)

Orman, S., Gorsche, C., Hofstetter, C., Baudis, S., Stampfl, J., & Liska, R. (2017). Biocompatible Photopolymers with Improved Impact Resistance for Additive Manufacturing. In Bypos Workshop Book 2017 (p. 53). http://hdl.handle.net/20.500.12708/49860 ( reposiTUm)

Mete, Y., Knaack, P., Schwentenwein, M., Strehmel, B., & Liska, R. (2017). NIR-Initiated Photopolymerisation in Filled Systems. In Bypos Workshop Book 2017 (p. 57). book of abstracts. http://hdl.handle.net/20.500.12708/49857 ( reposiTUm)

Mete, Y., Knaack, P., Schwentenwein, M., Strehmel, B., & Liska, R. (2017). NIR-initiated photopolymerization for lithography-based ceramic manufacturing. In RadTech Europe Conference & Exhibition 2017 (p. 88). http://hdl.handle.net/20.500.12708/49847 ( reposiTUm)

Catel, Y., Fässler, P., Fischer, U. K., Gorsche, C., Schörpf, S., Tauscher, S., Liska, R., & Moszner, N. (2017). Evaluation of Difunctional Vinylcyclopropanes as Reactive Diluents for the Development of Low-Shrinkage Composites. In 16th EPF European Polymer Congress (p. 57). http://hdl.handle.net/20.500.12708/49858 ( reposiTUm)

Brkic, S., Bovo, E., Gruber, P., Markovic, M., Doriana, O., Flora, T., Asthana, M., Roberto, G.-B., Abhay, P., Rodriguez-Cabello, J. C., Liska, R., Ovsianikov, A., & Banfi, A. (2017). Photo-grafting of VEGF protein gradients into elastin-like polymer hydrogels for improved vascularization. In eCM Meeting Abstracts 2017, Collection 2; TERMIS-EU 2017 Conference (p. 1). eCM Conferences Open Access online periodical. http://hdl.handle.net/20.500.12708/67676 ( reposiTUm)

Hölzl, K., Markovic, M., Gruber, P., Van Hoorick, J., Van Vlierberghe, S., Dubruel, P., Liska, R., & Ovsianikov, A. (2016). Photosensitive gelatine-methacrylamide as engineered extracellular matrix for three-dimensional cell culture. In Towards Future Regenerative Therapies (p. 215). European Cells and Materials Journal. http://hdl.handle.net/20.500.12708/67450 ( reposiTUm)

Gruber, P., Markovic, M., Tromayer, M., Mühleder, S., Van Hoorick, J., Hölzl, K., Holnthoner, W., Redl, H., Dubruel, P., Liska, R., Van Vlierberghe, S., & Ovsianikov, A. (2016). Laser photofabrication of 3D hydrogel structures within microfluidic channels. In Biofabrication 2016 (p. OP-16). elsevier. http://hdl.handle.net/20.500.12708/67478 ( reposiTUm)

Orman, S., Mautner, A., Baudis, S., Russmüller, G., Schwentenwein, M., & Liska, R. (2016). Additive Manufactured Vinyl Ester-based Photopolymers with Improved Impact Resistance. In ESPS 2016 (p. P-42). http://hdl.handle.net/20.500.12708/49336 ( reposiTUm)

Kury, M., Gorsche, C., Seidler, K., Gauss, P., Koch, T., & Liska, R. (2016). Addition-fragmentation chain transfer reagents in photopolymerisation of methacrylic monomers. In BYPoS Workshop book (p. 95). book of abstracts. http://hdl.handle.net/20.500.12708/49266 ( reposiTUm)

Zerobin, E., Baudis, S., Tomasikova, Z., Qin, X., Markovic, M., Gruber, P., Stampfl, J., Ovsianikov, A., & Liska, R. (2016). Micro fabrication of hydrogels based on hyaluronic acid. In BYPoS Workshop book (p. 107). book of abstracts. http://hdl.handle.net/20.500.12708/49264 ( reposiTUm)

Mitterbauer, M., Moszner, N., & Liska, R. (2016). Synthesis of novel si-based long wavelength photoinitiators for dental applications. In BYPoS Workshop book (p. 71). book of abstracts. http://hdl.handle.net/20.500.12708/49265 ( reposiTUm)

Schnöll, C., Gorsche, C., Moszner, N., & Liska, R. (2016). Debonding on Demand (DoD) via thermally induced gas formation using blocked isocyanates. In ESPS 2016 (p. P-43). http://hdl.handle.net/20.500.12708/49331 ( reposiTUm)

Kury, M., Seidler, K., Svirkova, A., Marchetti-Deschmann, M., Koch, T., Gorsche, C., & Liska, R. (2016). Addition-Fragmentation Chain Transfer Reagents in Photopolymerization of Acrylates. In ESPS 2016 (p. P-57). http://hdl.handle.net/20.500.12708/49344 ( reposiTUm)

Hofecker, A., Knaack, P., & Liska, R. (2016). New Approaches for the Synthesis of low toxic Vinyl ester-based Monomers. In ESPS 2016 (p. P-51). http://hdl.handle.net/20.500.12708/49346 ( reposiTUm)

Harakaly, G., Gorsche, C., Seidler, K., Reghunathan, H., Dorfinger, P., Koch, T., Stampfl, J., Moszner, N., & Liska, R. (2016). Formation of tough photopolymer networks using addition fragmentation chain transfer: A viable concept for lithography based 3D printing. In ESPS 2016 (p. P-55). http://hdl.handle.net/20.500.12708/49358 ( reposiTUm)

Tromayer, M., Markovic, M., Gruber, P., Hölzl, K., Steiger, W., Naumov, S., Scherzer, T., Stampfl, J., Ovsianikov, A., & Liska, R. (2016). Novel Two-Photon Initiators Based on Cleavable Diazosulfones. In ESPS 2016 (p. P-21). http://hdl.handle.net/20.500.12708/49349 ( reposiTUm)

Mitterbauer, M., Haas, M., Stüger, H., Moszner, N., & Liska, R. (2016). Visible light photoinitiators based on silicon for the curing of dental formulations. In ESPS 2016 (p. P-14). http://hdl.handle.net/20.500.12708/49348 ( reposiTUm)

Zerobin, E., Baudis, S., Tomasikova, Z., Qin, X., Markovic, M., Gruber, P., Stampfl, J., Ovsianikov, A., & Liska, R. (2016). High Resolved Biocompatible Hydrogel Constructs based on Hyaluronic Acid. In ESPS 2016 (p. P-34). http://hdl.handle.net/20.500.12708/49356 ( reposiTUm)

Knaack, P., Bomze, D., Krossing, I., & Liska, R. (2016). Advances in Cationic Photopolymerization. In ESPS 2016 (p. O-9). http://hdl.handle.net/20.500.12708/49368 ( reposiTUm)

Gauss, P., Seidler, K., Reghunathan, H., Kury, M., Svirkova, A., Marchetti-Deschmann, M., Dorfinger, P., Koch, T., Stampfl, J., Moszner, N., Gorsche, C., & Liska, R. (2016). Tailored Photopolymer Networks Using Addition Fragmentation Chain Transfer. In BIMac 2016 Programme Book and Book of Abstracts (p. 12). http://hdl.handle.net/20.500.12708/49377 ( reposiTUm)

Dorfinger, P. (2016). Toughening of Photopolymers with Core-Shell Particles for Stereolithography. In P. Dorfinger, R. Liska, & J. Stampfl (Eds.), 4th European Symposium of Photopolymer Science ESPS 2016 (p. P49). http://hdl.handle.net/20.500.12708/67501 ( reposiTUm)

Tromayer, M., Markovic, M., Gruber, P., Hölzl, K., Vlierberghe, S. V., Dubruel, P., Stampfl, J., Ovsianikov, A., & Liska, R. (2016). Biocompatible Two-Photon Initiator with Hyaluronan Backbone. In ESPS 2016 (p. P-37). http://hdl.handle.net/20.500.12708/49345 ( reposiTUm)

Liska, R. (2016). Advanced techniques for Photocuring of Hydrogels. In ESPS 2016 (pp. IL–3). http://hdl.handle.net/20.500.12708/49365 ( reposiTUm)

Gorsche, C., Seidler, K., Reghunathan, H., Gauss, P., Kury, M., Dorfinger, P., Koch, T., Stampfl, J., Moszner, N., & Liska, R. (2016). Addition fragmentation chain transfer: Enriching the field of photopolymer applications. In ESPS 2016 (p. O-7). http://hdl.handle.net/20.500.12708/49366 ( reposiTUm)

Stampfl, J., Dorfinger, P., Gmeiner, R., & Liska, R. (2016). Materials development for lithography-based 3D-printing. In Macromolecular Chemistry and Physics (p. 90). Wiley-VCH. http://hdl.handle.net/20.500.12708/67384 ( reposiTUm)

Baudis, S., Tomasikova, Z., Zerobin, E., Qin, X., Markovic, M., Gruber, P., Stampfl, J., Ovsianikov, A., & Liska, R. (2016). Laser-microfabricated, biocompatible hydrogels based on hyaluronan. In European Cells&Materials Journal (p. 454). European Cells&Materials Journal. http://hdl.handle.net/20.500.12708/49305 ( reposiTUm)

Gorsche, C., Knaack, P., Bomze, D., Seidler, K., Gauss, P., Griesser, M., Krossing, I., Koch, T., Moszner, N., & Liska, R. (2016). Toughening of Radical Photopolymer Networks and Advances in Cationic Photopolymerization. In 21st Noblelight UV Technical Seminar (p. 05). 21st Noblelight UV Technical Seminar-proceedings. http://hdl.handle.net/20.500.12708/49310 ( reposiTUm)

Lunzer, M., Ossipov, D., Hilborn, J., Gruber, P., Hölzl, K., Markovic, M., Tromayer, M., Stampfl, J., Liska, R., & Ovsianikov, A. (2016). Promoted two-photon induced cleavage of o-nitrobenzyl linkages in a hyaluronic acid based hydrogel by a two-photon initiator. In TERMIS-EU 2016 Conference (p. 42). European Cells&Materials Journal. http://hdl.handle.net/20.500.12708/49319 ( reposiTUm)

Tromayer, M., Markovic, M., Gruber, P., Hölzl, K., Vlierberghe, P. V., Dubruel, P., Stampfl, J., Ovsianikov, A., & Liska, R. (2016). Novel biocompatible two-photon initiator based on hyaluronan. In TERMIS-EU 2016 conference (p. 481). European Cells&Materials Journal. http://hdl.handle.net/20.500.12708/49320 ( reposiTUm)

Tromayer, M., Gruber, P., Hölzl, K., Markovic, M., Vlierberghe, S. V., Ovsianikov, A., Dubruel, P., Stampfl, J., & Liska, R. (2016). Hyaluronan-Based Two-Photon Initiator with Enhanced Biocompatibility. In Book of Abstracts (p. 1807). http://hdl.handle.net/20.500.12708/49321 ( reposiTUm)

Lunzer, M., Ossipov, D., Hilborn, J., Gruber, P., Hölzl, K., Markovic, M., Stampfl, J., Liska, R., & Ovsianikov, A. (2016). Two-photon degradation of a hyaluronic acid based hydrogel using a two-photon initiator as photosensitizer. In Frontiers in Bioengineering and Biotechnology. 10th World Biomaterials Congress, Montreal, Canada. Conference Abstract: 10th World Biomaterials Congress/Frontiers. https://doi.org/10.3389/conf.fbioe.2016.01.02498 ( reposiTUm)

Baudis, S., Tomasikova, Z., Zerobin, E., Qin, X., Gruber, P., Markovic, M., Stampfl, J., Ovsianikov, A., & Liska, R. (2016). Additive Manufactured, Biocompatible Hydrogels based on Hyaluronic Acid. In Book of Abstracts (p. 2728). http://hdl.handle.net/20.500.12708/49322 ( reposiTUm)

Baudis, S., Bomze, D., Lunzer, M., Stampfl, J., Ovsianikov, A., & Liska, R. (2016). Poly(vinyl alcohol) based hydrogels for 3D biomaterial constructs. In Book of Abstracts (p. 2693). http://hdl.handle.net/20.500.12708/49323 ( reposiTUm)

Dorfinger, P., Liska, R., & Stampfl, J. (2015). Toughening of Photopolymers for Stereolithography (SL). In 20th Symposium on Composites (pp. 53–59). Materials Science Forum. https://doi.org/10.4028/www.scientific.net/msf.825-826.53 ( reposiTUm)

Tomasikova, Z., Husar, B., Qin, X., Gruber, P., Markovic, M., Ovsianikov, A., & Liska, R. (2015). Hyaluronic acid based hydrogels for two photon lithography. In Proceedings of a Conference on Polymer Science (p. 59). http://hdl.handle.net/20.500.12708/49056 ( reposiTUm)

Seidler, K., Gorsche, C., Koch, T., Moszner, N., & Liska, R. (2015). The influence of addition-fragmentation-chain-transfer on mechanical properties of methacrylate networks. In Proceedings of a Conference on Polymer Science (p. 65). http://hdl.handle.net/20.500.12708/49054 ( reposiTUm)

Orman, S., Husar, B., Schwentenwein, M., & Liska, R. (2015). Biocompativle photopolymer composites for potential bon replacements. In Proceedings of a Conference on Polymer Science (p. 22). http://hdl.handle.net/20.500.12708/49052 ( reposiTUm)

Svajdlenková, H., Sausa, O., Gorsche, C., & Liska, R. (2015). Micro structural pals study of dimethacrylate networks. In Proceedings of a Conference on Polymer Science (p. 75). http://hdl.handle.net/20.500.12708/49055 ( reposiTUm)

Gorsche, C., Ovsianikov, A., Stampfl, J., & Liska, R. (2015). Photopolymerization: providing A triangle for material design, Biomaterials, and 3D printing. In Book of Abstracts (pp. 138–139). Richard Zemann. http://hdl.handle.net/20.500.12708/49033 ( reposiTUm)

Benedikt, S., Gugg, A., Fischer, U. K., Ganster, B., Gorsche, C., Moszner, N., & Liska, R. (2015). New Photopolymers in digital and restorative dentistry. In Book of Abstracts (pp. 122–123). Richard Zemann. http://hdl.handle.net/20.500.12708/49034 ( reposiTUm)

Gauss, P., Gorsche, C., Griesser, M., Moszner, N., & Liska, R. (2015). Tuning β-allyl sulfones as chan transfer agents in dimethacrylic photopolymers. In Proceedings of a Conference on Polymer Science (p. 69). http://hdl.handle.net/20.500.12708/49049 ( reposiTUm)

Benedikt, S., Moszner, N., & Liska, R. (2015). Benzoyl pheyltelluride as highly reactive terp-reagent for visible light induced controlled radical polymerization. In Proceedings of a Conference on Polymer Science (p. 127). http://hdl.handle.net/20.500.12708/49045 ( reposiTUm)

Benedikt, S., Moszner, N., & Liska, R. (2015). Water soluble visible light photoinitiators: li-tpo as highly reactive and soluble compound with extraordinary stability. In Proceedings of a Conference on Polymer Science (p. 127). http://hdl.handle.net/20.500.12708/49046 ( reposiTUm)

Bomze, D., Knaack, P., Kern, W., & Liska, R. (2015). Cationic frontal polymerization for the production of electrical insulating materials. In Proceedings of a Conference on Polymer Science (p. 62). http://hdl.handle.net/20.500.12708/49047 ( reposiTUm)

Gauss, P., Gorsche, C., Moszner, N., & Liska, R. (2015). β-Allyl sulfones with different activating groups as chain transfer agents in methacrylate photopolymerization. In Book of Abstracts. P2M Lacanau, Lacanau, France. http://hdl.handle.net/20.500.12708/49031 ( reposiTUm)

Potzmann, P., Baudis, S., Dworak, C., Bergmeister, H., Schima, H., & Liska, R. (2015). Thermoplastic Polyurethane Elastomers. In 79th Prague Meeting on Macromolecules. 79PMM, Prague, Czechia. http://hdl.handle.net/20.500.12708/49030 ( reposiTUm)

Tomasikova, Z., Qin, X., Gauss, P., & Liska, R. (2015). 3D Printing of biocompatible hydrogels. In 79th Prague Meeting on Macromolecules. 79PMM, Prague, Czechia. http://hdl.handle.net/20.500.12708/49029 ( reposiTUm)

Grunenberg, D., Gorsche, C., Griesser, M., Koch, T., Dorfinger, P., Stampfl, J., Moszner, N., & Liska, R. (2015). Tough Dimethacrylate Networks with Low Shrinkage Stress: Benefiting from β-Allyl Sulfones as Addition-Fragmentation Chain Transfer Agents. In Book of Abstracts. BPS 2015, Bayreuth, Germany. http://hdl.handle.net/20.500.12708/49032 ( reposiTUm)

Harakaly, G., Seidler, K., Griesser, M., Gorsche, C., Stampfl, J., & Liska, R. (2015). α-Sulfonoxy acrylate chain transfer agents for 3D printing of tough photopolymers. In Abstract Book (p. 85). http://hdl.handle.net/20.500.12708/49059 ( reposiTUm)

Grunenberg, D., Gorsche, C., Griesser, M., Gescheidt, G., Moszner, N., & Liska, R. (2015). Dimethacrylate Networks with Tunable Properties: The High Effectiveness of β-Allyl Sulfone Chain Transfer Agents. In Abstract Book (p. 83). http://hdl.handle.net/20.500.12708/49058 ( reposiTUm)

Lunzer, M., Rosspeintner, A., Holzer, B., Lumpi, D., Tromayer, M., Gruber, P., Horkel, E., Ovsianikov, A., Vauthey, E., Liska, R., & Fröhlich, J. (2015). Triarylamine based Materials as Two Photon Absorption Photoinitiators - Adjustment of Molecular Properties. In Abstract Book (p. 84). http://hdl.handle.net/20.500.12708/49060 ( reposiTUm)

Benedikt, S., Wang, J., Markovic, M., Moszner, N., Dietliker, K., Ovsianikov, A., Grützmacher, H., Hölzl, K., & Liska, R. (2015). Highly Efficient Cleavable Photoinitiators for Visible Light curing of Aqueous Formulations. In Abstract Book (p. 18). http://hdl.handle.net/20.500.12708/49062 ( reposiTUm)

Gauss, P., Gorsche, C., Griesser, M., Koch, T., Stampfl, J., Moszner, N., & Liska, R. (2015). Basic Investigation of Addition Fragmentation Chain Transfer Agents in Photopolymerization of Methacrylic Monomers. In Abstract Book (p. 16). http://hdl.handle.net/20.500.12708/49064 ( reposiTUm)

Bomze, D., Knaack, P., & Liska, R. (2015). Cationic Frontal Polymerization for curing of epoxide resins. In Abstract Book (p. 38). http://hdl.handle.net/20.500.12708/49063 ( reposiTUm)

Seidler, K., Gorsche, C., Kury, M., Reghunathan, H., Koch, T., Moszner, N., & Liska, R. (2015). Toughening of Methacrylate Networks through Addition-Fragmentation Chain Transfer. In Abstract Book (p. 17). http://hdl.handle.net/20.500.12708/49067 ( reposiTUm)

Potzmann, P., Lopez Villanueva, F. J., & Liska, R. (2015). UV Initiated Bubble Free Frontal Polymerization in Aqueos Conditions. In Abstract Book (p. 36). http://hdl.handle.net/20.500.12708/49066 ( reposiTUm)

Knaack, P., Bomze, D., Krossing, I., & Liska, R. (2015). New photoacid generator for cationic photopolymerisation. In Abstract Book (p. 63). http://hdl.handle.net/20.500.12708/49065 ( reposiTUm)

Gorsche, C., Seidler, K., Gauss, P., Griesser, M., Koch, T., Gescheidt, G., Moszner, N., & Liska, R. (2015). Efficient tuning of (meth)acrylate polymer network architecture for 3D Printing. In Abstracts. P2M Lacanau, Lacanau, France. http://hdl.handle.net/20.500.12708/49070 ( reposiTUm)

Orman, S., Potzmann, P., Samusjew, A., Husar, B., Schwentenwein, M., Koch, T., Stampfl, J., & Liska, R. (2015). Photopolymerization Of Biocompatible Composites. In Abstract USB. Photopolymerization Fundamentals 2015, Boulder, United States of America (the). http://hdl.handle.net/20.500.12708/49036 ( reposiTUm)

Potzmann, P., Lopez Villanueva, F. J., & Liska, R. (2015). Investigation Of Bubble Free, UV Initiated Frontal Polymerization In Aqueous Conditions. In Abstract USB. Photopolymerization Fundamentals 2015, Boulder, United States of America (the). http://hdl.handle.net/20.500.12708/49035 ( reposiTUm)

Knaack, P., Bomze, D., Krossing, I., & Liska, R. (2015). Novel Initiator For Photoinduced Cationic Polymerisation. In Abstract USB. Photopolymerization Fundamentals 2015, Boulder, United States of America (the). http://hdl.handle.net/20.500.12708/49037 ( reposiTUm)

Bomze, D., Husar, B., Gruber, P., Markovic, M., Ovsianikov, A., & Liska, R. (2015). Modified Poly(Vinyl Alcohol) based Hydrogels for Tissue Engineering via Thiol-Ene-Crosslinking. In Abstract USB. Photopolymerization Fundamentals 2015, Boulder, United States of America (the). http://hdl.handle.net/20.500.12708/49039 ( reposiTUm)

Gorsche, C., Seidler, K., Griesser, M., Koch, T., Moszner, N., & Liska, R. (2015). Using Addition Fragmentation Chain Transfer For Tough Methacrylate-Based Networks With Low Shrinkage Stress. In Abstract USB. Photopolymerization Fundamentals 2015, Boulder, United States of America (the). http://hdl.handle.net/20.500.12708/49041 ( reposiTUm)

Baudis, S., Tomasikova, Z., Knaack, P., Qin, X., Stampfl, J., Ovsianikov, A., & Liska, R. (2015). A Thiol-Ene based Modular Material System with Hyaluronic Acid Building Blocks. In Abstract USB. Photopolymerization Fundamentals 2015, Boulder, United States of America (the). http://hdl.handle.net/20.500.12708/49038 ( reposiTUm)

Bomze, D., Knaack, P., & Liska, R. (2015). Radical Induced Cationic Frontal Polymerization. In Abstract USB. Photopolymerization Fundamentals 2015, Boulder, United States of America (the). http://hdl.handle.net/20.500.12708/49040 ( reposiTUm)

Gorsche, C., Seidler, K., Gauss, P., Griesser, M., Koch, T., Moszner, N., & Liska, R. (2015). Addition Fragmentation Chain Transfer Reagents With Various Activating And Leaving Groups And Their Potential As Network Modifiers. In Abstract USB. Photopolymerization Fundamentals 2015, Boulder, United States of America (the). http://hdl.handle.net/20.500.12708/49042 ( reposiTUm)

Gorsche, C., Seidler, K., Gauss, P., Harakaly, G., Griesser, M., Koch, T., Stampfl, J., Moszner, N., & Liska, R. (2015). Tough And Low Shrinkage Photopolymers For 3d-Printing. In Abstract USB. Photopolymerization Fundamentals 2015, Boulder, United States of America (the). http://hdl.handle.net/20.500.12708/49043 ( reposiTUm)

Gorsche, C., Stampfl, J., & Liska, R. (2015). Photopolymerization: A powerful technique for the fabrication and 3D printing of biomaterials. In Abstracts. ISBPPB 2015, Orlando, United States of America (the). http://hdl.handle.net/20.500.12708/49044 ( reposiTUm)

Stampfl, J., Homa, J., & Liska, R. (2015). Lithography based Additive Manufacturing - Materials and Processes. In The 6th International Conference on Nanoscience & Technology (p. 179). http://hdl.handle.net/20.500.12708/67240 ( reposiTUm)

Gruber, P., Markovic, M., Hölzl, K., Tromayer, M., Van Vlierberghe, S., Dubruel, P., Liska, R., Stampfl, J., & Ovsianikov, A. (2014). Laser Photofabrication of Cell-Containing Hydrogel Constructs. In 3rd European Symposium of Photopolymer Science (p. 167). http://hdl.handle.net/20.500.12708/67062 ( reposiTUm)

Lunzer, M., Holzer, B., Tromayer, M., Lumpi, D., Horkel, E., Liska, R., & Fröhlich, J. (2014). Synthesis And Characterization Of Novel Cap-Linker-Cap Type Structures As Two-Photon Absorption Photoinitiators. In 3#^{rd} European Symposium of Photopolymer Science - Abstract Book (p. PO-55). http://hdl.handle.net/20.500.12708/49537 ( reposiTUm)

Holzer, B., Lumpi, D., Tromayer, M., Gruber, P., Horkel, E., Ovsianikov, A., Liska, R., & Fröhlich, J. (2014). Initiators For Two Photon Induced Polymerization Based On A Novel Cap-Linker-Cap System. In European Symposium of Photopolymer Science - Abstract Book (p. PO-37). http://hdl.handle.net/20.500.12708/49534 ( reposiTUm)

Horkel, E., Holzer, B., Lunzer, M., Lumpi, D., Tromayer, M., Gruber, P., Ovsianikov, A., Liska, R., & Fröhlich, J. (2014). Cap-Linker-Cap Systems As Initiators For Two-Photon Induced Polymerization: A Theoretical Approach. In 3#^{rd} European Symposium of Photopolymer Science - Abstract Book (p. PO-38). http://hdl.handle.net/20.500.12708/49535 ( reposiTUm)

Bomze, D., Husar, B., Gruber, P., Markovic, M., Ovsianikov, A., & Liska, R. (2014). Norbornen Modified Poly(vinyl Alcohol) Based Hydrogels For Tissue Engineering Via Thiol-Ene Crosslinking. In 3rd European Symposium of Photopolymer Science (p. 147). http://hdl.handle.net/20.500.12708/48662 ( reposiTUm)

Griesser, M., Husar, B., Sehnal, P., Harper, K., Rose, A. T., Anderson, D. G., & Liska, R. (2014). A New Variant Of Phosphine Oxide Photoinitiators. In 3rd European Symposium of Photopolymer Science (p. 166). http://hdl.handle.net/20.500.12708/48664 ( reposiTUm)

Orman, S., Samusjew, A., Husar, B., Koch, T., Stampfl, J., & Liska, R. (2014). Application Of Thiol-Ene Click Chemistry For Potential Bone Replacement Materials. In 3rd European Symposium of Photopolymer Science (p. 196). http://hdl.handle.net/20.500.12708/48665 ( reposiTUm)

Gauss, P., Moszner, N., & Liska, R. (2014). Beta-Allyl Sulfones As Transfer Agents In Methacrylic Photopolymers. In 3rd European Symposium of Photopolymer Science (p. 164). http://hdl.handle.net/20.500.12708/48663 ( reposiTUm)

Qin, X., Labuda, K., Bomze, D., Khadem, A., Slezak, P., Liska, R., & Redl, H. (2014). ENGINEERED PHOTOCURABLE BIOMATERIALS TO HALT BLEEDINGApplication Of Thiol-Ene Click Chemistry For Potential Bone Replacement Materials. In 3rd European Symposium of Photopolymer Science (p. 188). http://hdl.handle.net/20.500.12708/48666 ( reposiTUm)

Husar, B., Gorsche, C., Qin, X., Hoffmann, H., & Liska, R. (2014). Real Time FTIR - Photorheology: A Powerful Tool for Monitoring Changes in Chemical and Viscoelastic Properties During UV-Curing. In Program & Poster Abstracts. IRDG Spring Meeting Vienna, Wien, Austria. http://hdl.handle.net/20.500.12708/48579 ( reposiTUm)

Fröhlich, S., Strobl, M., Bergmeister, H., Liska, R., & Marchetti-Deschmann, M. (2014). In vivo protein and lipid adsorption on vascular replacement systems studied by mass spectrometry imaging. In M. Marchetti-Deschmann & G. Allmaier (Eds.), Abstractbook. http://hdl.handle.net/20.500.12708/48612 ( reposiTUm)

Seidler, K., Gorsche, C., Moszner, N., & Liska, R. (2014). The Effect Of Leaving Groups Of Chain Transfer Agents. In 3rd European Symposium of Photopolymer Science (p. 211). http://hdl.handle.net/20.500.12708/48667 ( reposiTUm)

Tomasikova, Z., Qin, X., Husar, B., Gruber, P., Plochberger, B., Markovic, M., Ovsianikov, A., Stampfl, J., & Liska, R. (2014). Hyaluronic Acid-Based Hydrogels For Two-Photon Polymerisation Applications. In 3rd European Symposium of Photopolymer Science (p. 219). http://hdl.handle.net/20.500.12708/48668 ( reposiTUm)

Tromayer, M., Gruber, P., Ajami, A., Rosspeintner, A., Naumov, S., Ovsianikov, A., Stampfl, J., & Liska, R. (2014). Synthesis And Characterization Of Aminostyryl-1,3,5-Triazines As Initiators For Two-Photon Induced Polymerization. In 3rd European Symposium of Photopolymer Science (p. 220). http://hdl.handle.net/20.500.12708/48669 ( reposiTUm)

Benedikt, S., Moszner, N., & Liska, R. (2014). New And Highly Reactive Visible Light Photoiniferter: Benzoyl Phenyltelluride. In 3rd European Symposium of Photopolymer Science (p. 76). http://hdl.handle.net/20.500.12708/48670 ( reposiTUm)

Bomze, D., Husar, B., Markovic, M., Ovsianikov, A., & Liska, R. (2014). Novel Low-Toxic Poly(vinyl Alcohol) Based Hydrogels For Tissue Engineering Via Thiol-Ene Crosslinking. In 3rd European Symposium of Photopolymer Science (p. 132). http://hdl.handle.net/20.500.12708/48671 ( reposiTUm)

Gorsche, C., Koch, T., Moszner, N., Stampfl, J., & Liska, R. (2014). Allyl Sulfone / Dimethacrylate Networks: Homogeneous And Tough Photopolymer Networks For Biomedical Applications. In 3rd European Symposium of Photopolymer Science (p. 73). http://hdl.handle.net/20.500.12708/48672 ( reposiTUm)

Griesser, M., Gorsche, C., Moszner, N., & Liska, R. (2014). Mechanistic Investigations Of Chain Transfer Reagents. In 3rd European Symposium of Photopolymer Science (p. 112). http://hdl.handle.net/20.500.12708/48673 ( reposiTUm)

Qin, X., Tomasikova, Z., Gruber, P., Plochberger, B., Markovic, M., Ovsianikov, A., Stampfl, J., & Liska, R. (2014). Two-Photon Microfabrication Of Biomimetic Hydrogel Constructs For Tissue Regeneration. In 3rd European Symposium of Photopolymer Science (p. 129). http://hdl.handle.net/20.500.12708/48677 ( reposiTUm)

Mautner, A., Ligon, S., Husar, B., Koch, T., Stampfl, J., & Liska, R. (2014). Vinyl Esters With Improved Reactivity And Toughness. In A. Mautner, S. Ligon, B. Husar, T. Koch, J. Stampfl, & R. Liska (Eds.), 3rd European Symposium of Photopolymer Science (p. 71). http://hdl.handle.net/20.500.12708/48676 ( reposiTUm)

Husar, B., Gorsche, C., Qin, X., Hoffmann, H., & Liska, R. (2014). Monitoring Of Uv-Curing By Real Time Ftir - Photorheology. In 3rd European Symposium of Photopolymer Science (p. 108). http://hdl.handle.net/20.500.12708/48675 ( reposiTUm)

Gruber, P., Markovic, M., Hölzl, K., Tromayer, M., Van Vlierberghe, S., Dubruel, P., Liska, R., Stampfl, J., & Ovsianikov, A. (2014). Laser photofabrication of 3D cell-containing hydrogel constructs. In 2014 Tissue Engineering and Regenerative Medicine International Society-Asia Pacific Meeting (TERMIS-AP 2014). 2014 Tissue Engineering and Regenerative Medicine International Society-Asia Pacific Meeting (TERMIS-AP 2014), Daegu, Korea (the Republic of). http://hdl.handle.net/20.500.12708/67110 ( reposiTUm)

Dorfinger, P., Stampfl, J., & Liska, R. (2014). Toughening Of Photopolymers For Stereolithography (sl). In 3rd European Symposium of Photopolymer Science (pp. 25–26). ESPS 2014. http://hdl.handle.net/20.500.12708/67056 ( reposiTUm)

Holzer, B., Tromayer, M., Lumpi, D., Ajami, A., Horkel, E., Husinsky, W., Ovsianikov, A., Liska, R., & Fröhlich, J. (2014). Cap-Linker-Cap Systems as Initiators for Two-Photon Induced-Polymerization. In LPM 2014 Program & Technical Digest (p. 260). http://hdl.handle.net/20.500.12708/48678 ( reposiTUm)

Gruber, P., Markovic, M., Hölzl, K., Tromayer, M., Van Vlierberghe, S., Dubruel, P., Liska, R., Stampfl, J., & Ovsianikov, A. (2014). Laser Photofabrication of Cell-Containing Hydrogel Constructs. In LPM 2014 Program & Technical Digest (p. 263). http://hdl.handle.net/20.500.12708/48680 ( reposiTUm)

Bomze, D., Husar, B., Markovic, M., Ovsianikov, A., & Liska, R. (2014). Novel low-toxic poly(vinyl alcohol) based hydrogels for tissue engineering via thiol-ene crosslinking. In BYPoS workshop book (p. 57). book of abstracts. http://hdl.handle.net/20.500.12708/48704 ( reposiTUm)

Tomasikova, Z., Qin, X., Husar, B., Gruber, P., Plochberger, B., Markovic, M., Ovsianikov, A., Stampfl, J., & Liska, R. (2014). Two-photon polymerisation of hyaluronic acid-based hydrogels for tissue engineering. In BYPoS workshop book (p. 91). book of abstracts. http://hdl.handle.net/20.500.12708/48705 ( reposiTUm)

Zwirchmayr, N. S., Potzmann, P., Grasl, C., Koch, T., Bergmeister, H., & Liska, R. (2014). Segmented linear thermoplastic urethane elastomers with novel building blocks for electrospinning of vascular grafts. In BYPoS workshop book (p. 93). book of abstracts. http://hdl.handle.net/20.500.12708/48706 ( reposiTUm)

Liska, R. (2014). Advanced Applications of Photopolymerization: 3D Printing of Biomaterials. In 24. Lecture Conference of Photochemistry (p. 50). http://hdl.handle.net/20.500.12708/48813 ( reposiTUm)

Gruber, P., Markovic, M., Hölzl, K., Tromayer, M., Van Vlierberghe, S., Dubruel, P., Liska, R., Stampfl, J., & Ovsianikov, A. (2014). Laser photofabrication of 3D cell-containing hydrogel constructs. In International Conference on Biofabrication. ICB 2014, Pohang, Korea (the Republic of). http://hdl.handle.net/20.500.12708/67111 ( reposiTUm)

Fröhlich, S., Bergmeister, H., Liska, R., & Marchetti-Deschmann, M. (2014). Protein and lipid adsorption on vascular replacement systems studied by mass spectrometry imaging. In Abstract Book (p. 55). http://hdl.handle.net/20.500.12708/48722 ( reposiTUm)

Potzmann, P., Qin, X., Pucher, N. U., Torgersen, J., Mühleder, S., Holnthoner, W., Redl, H., Stampfl, J., Ovsianikov, A., & Liska, R. (2013). High-precision manufacturing of 3D hydrogel scaffolds via two-photon polymerization. In Abstract Book (p. 117). http://hdl.handle.net/20.500.12708/48296 ( reposiTUm)

Husar, B., Mautner, A., Heller, C., Esfandiari, P., Varga, F., Stampfl, J., & Liska, R. (2013). Low toxic alternatives to (meth)acrylates: Vinyl esters, vinyl carbonates, and vinyl carbamates. In Guide Book. RadTech Asia 2013, Shanghai, Non-EU. http://hdl.handle.net/20.500.12708/48199 ( reposiTUm)

Husar, B., Samusjew, A., Koch, T., Stampfl, J., & Liska, R. (2013). 3D fabrication of scaffolds from low cytotoxic vinylester and thiols. In Meeting Abstracts (p. 447). J Tissue Eng Regen Med. http://hdl.handle.net/20.500.12708/48578 ( reposiTUm)

Qin, X., Esfandiari, P., Ligon, S., Ovsianikov, A., & Liska, R. (2013). Storage Stable Thiol-Ene Formulations and advances applications thereof. In Abstract Book (p. 14). http://hdl.handle.net/20.500.12708/48289 ( reposiTUm)

Griesser, M., Gescheidt, G., & Liska, R. (2013). Elucidating Reaction Mechanisms of Photoinitiators by Magnetic Resonance. In Abstract Book (p. 36). http://hdl.handle.net/20.500.12708/48290 ( reposiTUm)

Gorsche, C., Tromayer, M., Li, Z., Torgersen, J., Ajami, A., Rosspeintner, A., Naumov, S., Scherzer, T., Ovsianikov, A., & Liska, R. (2013). Efficent synthesis of two-photon initiators via one step aldol condensation. In Book of Abstracts. Photopolymerization Fundamentals 2013, Jackson Hole, United States of America (the). http://hdl.handle.net/20.500.12708/48298 ( reposiTUm)

Gorsche, C., Griesser, M., Neshchadin, D., Rosspeintner, A., Gorelik, V., Ganster, B., Saf, R., Gescheidt, G., Moszner, N., & Liska, R. (2013). Investigating the mechanism and photoreactivity of germanium based long wavelength photoinitiators for dental materials. In Book of Abstracts. Photopolymerization Fundamentals 2013, Jackson Hole, United States of America (the). http://hdl.handle.net/20.500.12708/48299 ( reposiTUm)

Potzmann, P., Qin, X., Mühleder, S., Holnthoner, W., Redl, H., Stampfl, J., Ovsianikov, A., & Liska, R. (2013). Development of a novel photocurable hydrogel precursor. In Abstract Book (p. 121). http://hdl.handle.net/20.500.12708/48297 ( reposiTUm)

Ligon, S., Husar, B., Wutzel, H., Torgersen, J., & Liska, R. (2013). Developing anti-oxygen inhibition strategies for LED-based wood coatings. In Abstract Book (p. 118). http://hdl.handle.net/20.500.12708/48295 ( reposiTUm)

Potzmann, P., Qin, X., Pucher, N. U., Torgersen, J., Mühleder, S., Holnthoner, W., Redl, H., Stampfl, J., Ovsianikov, A., & Liska, R. (2013). Micrometer-scale precise 3D hydrogel scaffolds prepared by two-photon polymerization. In Book of Abstracts. Photopolymerization Fundamentals 2013, Jackson Hole, United States of America (the). http://hdl.handle.net/20.500.12708/48300 ( reposiTUm)

Potzmann, R., Qin, X., Mühleder, S., Holnthoner, W., Redl, H., Stampfl, J., Ovsianikov, A., & Liska, R. (2013). Hyaluron vinyl esters as novel precursors for photocurable hydrogels. In Book of Abstracts. Photopolymerization Fundamentals 2013, Jackson Hole, United States of America (the). http://hdl.handle.net/20.500.12708/48301 ( reposiTUm)

Liska, R. (2013). Advanced Applications of Storage Stable Thiol-Ene Formulations. In Book of Abstracts. Photopolymerization Fundamentals 2013, Jackson Hole, United States of America (the). http://hdl.handle.net/20.500.12708/48302 ( reposiTUm)

Qin, X., Husar, B., Torgersen, J., Mühleder, S., Holnthoner, W., Redl, H., Stampfl, J., Ovsianikov, A., & Liska, R. (2013). Gelatin/Albumin-Based Hydrogels Scaffolds By Two-Photon Polymerization. In Abstracts (p. 195). http://hdl.handle.net/20.500.12708/48201 ( reposiTUm)

Ligon, S., Husar, B., Wutzel, H., Hoffmann, H., Torgersen, J., & Liska, R. (2013). An overview of anti-oxygen inhibition strategies for LED-based wood coatings. In Guide Book. RadTech Asia 2013, Shanghai, China. http://hdl.handle.net/20.500.12708/48200 ( reposiTUm)

Husar, B., Mautner, A., Heller, C., Varga, F., Koch, T., Macfelda, K., Russmüller, G., Stampfl, J., & Liska, R. (2013). Biodegradable Bone Replacement Material From Low Cytotoxic Monomers. In Abstracts (p. 244). http://hdl.handle.net/20.500.12708/48202 ( reposiTUm)

Griesser, M., Gescheidt, G., & Liska, R. (2013). Insights into the Reactivity of Photoinitiators by Magnetic Resonance. In 6th Pacific Symposium on Radical Chemistry - Programme. 6th-Pacific Symposium on Radical Chemistry (6th-PSRC), Vancouver, United States of America (the). http://hdl.handle.net/20.500.12708/48198 ( reposiTUm)

Tromayer, M., Li, Z., Torgersen, J., Ajami, A., Rosspeintner, A., Naumov, S., Scherzer, T., Ovsianikov, A., & Liska, R. (2013). Novel Highly Efficient Initiators For Two-Photon Induced Photopolimerization. In Abstract Book (p. 40). http://hdl.handle.net/20.500.12708/48292 ( reposiTUm)

Tromayer, M., Mautner, A., Husar, B., Heller, C., Varga, F., Koch, T., Macfelda, K., Russmüller, G., Stampfl, J., & Liska, R. (2013). Vinyl carbonates with improved mechanical properties. In Abstract Book (p. 120). http://hdl.handle.net/20.500.12708/48293 ( reposiTUm)

Ligon, S., Kellner, M., Radovanovic, P., Matovic, J., & Liska, R. (2013). Photocurable Poly-AMPS-Based Proton Exchange Membranes For Fuel Cells. In Abstract Book (p. 88). http://hdl.handle.net/20.500.12708/48294 ( reposiTUm)

Griesser, M., Rosspeintner, A., Dworak, C., Gescheidt, G., & Liska, R. (2013). Insights into the Reactivity of Benzaldoxime Esters as Photoinitiators. In Abstract Book (p. 119). http://hdl.handle.net/20.500.12708/48291 ( reposiTUm)

Ovsianikov, A., Haslinger, K., Qin, X., Li, Z., Gruber, P., Torgersen, J., Van Vlierberghe, S., Dubruel, P., Liska, R., & Stampfl, J. (2013). Laser microfabrication of 3D CAD structures from photosensitive hydrogel precursors. In ICMAT 2013 - 7th International Conference on Materials for Advanced Technologies (p. 218). http://hdl.handle.net/20.500.12708/66935 ( reposiTUm)

Lunzer, M., Holzer, B., Lumpi, D., Horkel, E., Liska, R., & Fröhlich, J. (2013). Synthesis of Novel Cap-Linker-Cap Structures as Potential Initiators For Two-Photon-Induced Polymerization. In Book of Abstracts (p. P45). http://hdl.handle.net/20.500.12708/48449 ( reposiTUm)

Qin, X., Mühleder, S., Gruber, P., Ovsianikov, A., Redl, H., & Liska, R. (2013). Design and Synthesis of a Novel Hydrogel Precursor: hyaluronate vinyl esters. In Advances in Tissue Regeneration 2013. Advances in Tissue Regeneration 2013, Lattrop, Netherlands (the). http://hdl.handle.net/20.500.12708/48372 ( reposiTUm)

Qin, X., Mühleder, S., Torgersen, J., Ovsianikov, A., Redl, H., Stampfl, J., & Liska, R. (2013). 3D construction of artifical ECM hydrogels by two-photon-induced polymerization. In Advances in Tissue Regeneration 2013. Advances in Tissue Regeneration 2013, Lattrop, Netherlands (the). http://hdl.handle.net/20.500.12708/48371 ( reposiTUm)

Susec, M., Ligon, S., Liska, R., & Krajnc, P. (2013). Acrylate and thiol based highly porous polymers by emulsion templating : lecture at Third International Symposium Frontiers polymer science in association with the journal polymer. In Programme Booklet. Third International Symposium Frontiers polymer science in association with the journal polymer, Sitges, Spain. http://hdl.handle.net/20.500.12708/48308 ( reposiTUm)

Potzmann, P., Seidler, K., Ligon, S., Koch, T., Stampfl, J., Messner, B., Grasl, C., Bergmeister, H., Schima, H., & Liska, R. (2013). Thermoplastic polyurethane elastomers derived from new building blocks for vascular tissue engineering. In M. Zigon & T. Rajsp (Eds.), The Proceedings of the Austrian - Slovenian Polymer Meeting - ASPM 2013 (pp. 37–38). http://hdl.handle.net/20.500.12708/48197 ( reposiTUm)

Liska, R. (2013). Thiol-ene polymerization of biocompatible monomers in additive manufactoring technology. In M. Zigon & T. Rajsp (Eds.), The Proceedings of the Austrian - Slovenian Polymer Meeting - ASPM 2013 (pp. 7–8). http://hdl.handle.net/20.500.12708/48192 ( reposiTUm)

Tromayer, M., Li, Z., Torgersen, J., Ajami, A., Rosspeintner, A., Naumov, S., & Liska, R. (2013). Preparation and characterization of novel type I/ type II photoinitiators for two-photon submicro-stereolithography. In M. Zigon & T. Rajsp (Eds.), The Proceedings of the Austrian - Slovenian Polymer Meeting - ASPM 2013 (p. 307). http://hdl.handle.net/20.500.12708/48191 ( reposiTUm)

Qin, X., Husar, B., Torgersen, J., Mühleder, S., Holnthoner, W., Redl, H., Stampfl, J., Ovsianikov, A., & Liska, R. (2013). Biodegradable 3D Hydrogels Scaffold by Two-Photon Polymerization. In Book of contributions. 25th European Conference on Biomaterials, Madrid, Spain. http://hdl.handle.net/20.500.12708/48188 ( reposiTUm)

Qin, X., Ovsianikov, A., Redl, H., & Liska, R. (2013). Development of a novel cytocompatible and photopolymerizable hydrogel precursor: hyaluronate vinyl ester. In D. Eglin, M. D´Este, & D. Schraner (Eds.), Program & Abstract (p. 19). http://hdl.handle.net/20.500.12708/48189 ( reposiTUm)

Qin, X., Torgersen, J., Mühleder, S., Holnthoner, W., Ovsianikov, A., Stampfl, J., Redl, H., & Liska, R. (2013). Two-photon microfabrication of artificial ECM hydrogel via thiol-ene chemistry. In D. Eglin, M. D´Este, & D. Schraner (Eds.), Program & Abstract (p. 19). http://hdl.handle.net/20.500.12708/48186 ( reposiTUm)

Husar, B., Mautner, A., Heller, C., Varga, F., Koch, T., Macfelda, K., Russmüller, G., Stampfl, J., & Liska, R. (2013). Vinyl Carbonates and Vinyl Esters: From Synthesis to In Vivo Testing of Bone Replacement Material. In Book of contributions. 25th European Conference on Biomaterials, Madrid, Spain. http://hdl.handle.net/20.500.12708/48187 ( reposiTUm)

Susec, M., Liska, R., & Krajnc, P. (2013). Thiol-ene chemistry and emulsion templating for microcellular open porous polymer preparation. In M. Zigon & T. Rajsp (Eds.), The Proceedings of the Austrian - Slovenian Polymer Meeting - ASPM 2013 (p. 307). http://hdl.handle.net/20.500.12708/48184 ( reposiTUm)

Qin, X., Li, Z., Torgersen, J., Ovsianikov, A., Mühleder, S., Holnthoner, W., Stampfl, J., & Liska, R. (2012). Development of biocompatible 3D hydrogel scaffolds: From synthesis to two-photon-polymerization. In J. Stampfl (Ed.), Abstracts (p. 65). http://hdl.handle.net/20.500.12708/47528 ( reposiTUm)

Husar, B., Mautner, A., Heller, C., Schwentenwein, M., Varga, F., Koch, T., Macfelda, K., Russmüller, G., Stampfl, J., & Liska, R. (2012). 3D scaffolds from low toxic vinyl carbonates. In J. Stampfl (Ed.), Abstracts (p. 105). http://hdl.handle.net/20.500.12708/47776 ( reposiTUm)

Liska, R., Gorsche, C., Gugg, A., Stampfl, J., & Moszner, N. (2012). Future Perspectives of photopolymerization. In J. Stampfl (Ed.), Abstracts (p. 129). http://hdl.handle.net/20.500.12708/48028 ( reposiTUm)

Susec, M., Liska, R., Ligon, S., & Krajnc, P. (2012). Hierarchically porous polymers from divinyladipate and thiols via emulsion templating. In J. Stampfl (Ed.), Abstracts (p. 83). http://hdl.handle.net/20.500.12708/48029 ( reposiTUm)

Qin, X., Li, Z., Torgersen, J., Ovsianikov, A., Mühleder, S., Holnthoner, W., Stampfl, J., & Liska, R. (2012). Developing Biodegradable 3D Hydrogels Scaffolds: From Synthesis to Two-photon Polymerization. In Journal of Tissue Engineering and Regenerative Medicine 2012 (p. 369). John Wiley & Sons, Ltd. http://hdl.handle.net/20.500.12708/48053 ( reposiTUm)

Kellner, M., Radovanovic, P., Liska, R., & Matovic, J. (2012). Novel Crosslinker for Photopolymerization of Proton Conducting Fuel Cell Membranes. In Proceedings of the 9th International Conference on Multi-Material Micro Manufacture. 9#^{th} International Conference on Multi-Material Micro Manufacture - 4M 2012, Wien, Austria. https://doi.org/10.3850/978-981-07-3353-7_303 ( reposiTUm)

Li, Z., Qin, X., Ovsianikov, A., Torgersen, J., Ajami, A., Husinsky, W., Mühleder, S., Holnthoner, W., Stampfl, J., & Liska, R. (2012). Water Soluble Initiators for Two-photon Polymerization. In Journal of Tissue Engineering and Regenerative Medicine 2012 (p. 369). John Wiley & Sons, Ltd. http://hdl.handle.net/20.500.12708/48055 ( reposiTUm)

Potzmann, P., Seidler, K., Ligon, S., Koch, T., Stampfl, J., & Liska, R. (2012). New building blocks for thermoplastic polyurethane elastomers for soft tissue engineering. In Journal of Tissue Engineering and Regenerative Medicine 2012 (p. 215). John Wiley & Sons, Ltd. http://hdl.handle.net/20.500.12708/48054 ( reposiTUm)

Ligon, S., Husar, B., Baudis, S., Seidler, K., Weigel, G., Grasl, C., Bergmeister, H., & Liska, R. (2012). Ester based thermoplastic polyurethanes for electrospun vascular prostheses. In Journal of Tissue Engineering and Regenerative Medicine 2012 (p. 146). John Wiley & Sons, Ltd. http://hdl.handle.net/20.500.12708/48056 ( reposiTUm)

Li, Z., Qin, X., Ovsianikov, A., Torgersen, J., Ajami, A., Husinsky, W., Mühleder, S., Holnthoner, W., Stampfl, J., & Liska, R. (2012). Novel water soluble two-photon initiators for 3D scaffold microfabrication. In J. Stampfl (Ed.), 5#^{th} Vienna Biomaterialsymposium 19.11.-21.11.2012 (p. 95). http://hdl.handle.net/20.500.12708/48025 ( reposiTUm)

Höller, F., Ovsianikov, A., Torgersen, J., Koch, T., Dekel, D., Levenberg, S., Nürnberger, S., Redl, H., Liska, R., & Stampfl, J. (2012). Laser microfabrication of elastic 3D scaffolds. In Abstracts 5th Biomaterialsymposium Vienna (pp. 107–108). http://hdl.handle.net/20.500.12708/66679 ( reposiTUm)

Ovsianikov, A., Torgersen, J., Qin, X., Li, Z., Mühleder, S., Holnthoner, W., Liska, R., & Stampfl, J. (2012). Engineering 3D cell-culture matrices with femtosecond laserinduced photochemistry. In Abstracts 5th Biomaterialsymposium Vienna (pp. 15–16). http://hdl.handle.net/20.500.12708/66678 ( reposiTUm)

Ovsianikov, A., Dado-Rosenfeld, D., Nürnberger, S., Levenberg, S., Redl, H., Liska, R., & Stampfl, J. (2012). Laser fabrication of multi-scale elastic 3D scaffolds. In Journal of Tissue Engineering and Regenerative Medicine (p. 366). Wiley. http://hdl.handle.net/20.500.12708/66680 ( reposiTUm)

Hatzenbichler, M., Felzmann, R., Gruber, S., Mitteramskogler, G., Tesavibul, P., Stampfl, J., & Liska, R. (2012). Additive Manufacturing of high performance ceramic structures. In H. Noll, N. Adamovic, & S. Dimov (Eds.), Multi-material Micro Manufacture (pp. 16–19). Research Publishing. http://hdl.handle.net/20.500.12708/66656 ( reposiTUm)

Seyidova, N., Grasl, C., Stoiber, M., Schreiber, C., Walter, I., Seidler, K., Ligon, S., Baudis, S., Liska, R., Bernhard, D., Schima, H., & Bergmeister, H. (2012). Elastomeric, nanostructured, biodegradable vascular grafts for small-diamter vascular replacement. In BioNanoMed 2012. BioNanoMed 2012, Krems, Austria. http://hdl.handle.net/20.500.12708/48073 ( reposiTUm)

Bergmeister, H., Grasl, C., Stoiber, M., Schreiber, C., Seyidova, N., Kapeller, B., Walter, I., Seidler, K., Ligon, S., Baudis, S., Liska, R., & Schima, H. (2012). Nanostructured, bioresorbable vascular substitutes. In Abstracts. 5#^{th} Biomaterialsymposium, Vienna, Austria. http://hdl.handle.net/20.500.12708/48074 ( reposiTUm)

Gruber, S., Mitteramskogler, G., Felzmann, R., Tesavibul, P., Liska, R., & Stampfl, J. (2012). Generative Erzeugung von biokeramischen Bauteilen. In Fachmesse und Anwendertagung für Rapid-Technologie (p. 88 (105)). http://hdl.handle.net/20.500.12708/66637 ( reposiTUm)

Ligon, S., Baudis, S., Nehl, F., Mautner, A., Husar, B., Schwentenwein, M., Wilke, A., Stampfl, J., Russmüller, G., & Liska, R. (2012). Biocompatible monomers for photo-based additive manufacturing technologies. In MSE Programme (p. 62). http://hdl.handle.net/20.500.12708/66593 ( reposiTUm)

Torgersen, J., Ovsianikov, A., Mironov, V., Pucher, N. U., Qin, X., Cicha, K., Li, Z., Machacek, T., Jantsch-Plunger, V., Liska, R., & Stampfl, J. (2012). Biocompatible Hydrogels for the Three-dimensional Micro-fabrication of Extracellular Environments. In Bio-inspired Materials International School and Conference on Biological Materials Science (p. 20). DGM Programme. http://hdl.handle.net/20.500.12708/66525 ( reposiTUm)

Gruber, S., Felzmann, R., Mitteramskogler, G., Liska, R., & Stampfl, J. (2012). Generation of ceramic parts via lithography-based AMT. In MSE Programme (p. 37). http://hdl.handle.net/20.500.12708/66592 ( reposiTUm)

Stampfl, J., Torgersen, J., Ovsianikov, A., Qin, X., Li, Z., Mühleder, S., Holnthoner, W., & Liska, R. (2012). Photo-stimulation of low-toxicity biopolymers in additive manufacturing. In MSE Programme (p. 22). http://hdl.handle.net/20.500.12708/66591 ( reposiTUm)

Ovsianikov, A., Nürnberger, S., Torgersen, J., Li, Z., Redl, H., Liska, R., & Stampfl, J. (2012). Fabrication of elastic 3D scaffolds by two-photon polymerization. In MSE Programme (p. 37). http://hdl.handle.net/20.500.12708/66590 ( reposiTUm)

Gruber, S., Torgersen, J., Neumeister, A., Felzmann, R., Liska, R., & Stampfl, J. (2012). Advanced Photopolymer-based Additive Manufacturing Systems Using High Performance Light Sources. In 7th International Symposium on Emerging and Industrial DLP® Applications. 7th International Symposium on Emerging and Industrial DLP® Applications, Frankfurt, Germany. http://hdl.handle.net/20.500.12708/66636 ( reposiTUm)

Li, Z., Cicha, K., Ajami, A., Rosspeintner, A., Naumov, S., Scherzer, T., Stampfl, J., & Liska, R. (2012). A facial preparation and structure property relationship of novel photoinitiators for two -photon photopolymerization. In 4#^{th} Bratislava Young Polymer Scientists workshop (p. 83). http://hdl.handle.net/20.500.12708/48032 ( reposiTUm)

Li, Z., Ovsianikov, A., Torgersen, J., Stampfl, J., & Liska, R. (2012). 3D site-specific functionalization of matrices via multi-photon grafting and subsequent click reaction. In International Symposium on NanoPhotonics 2012. International Symposium on NanoPhotonics 2012, Beijing, China. http://hdl.handle.net/20.500.12708/48033 ( reposiTUm)

Wutzel, H., Dworak, C., Tiefenthaler, R., Lagref, J. J., Frantz, R., Cherkaoui, Z. M., & Liska, R. (2012). Ionic liquids for radical photopolymerization. In European Symposium of Photopolymer Science - Book of Abstracts (p. 22). http://hdl.handle.net/20.500.12708/48039 ( reposiTUm)

Kellner, M., Radovanovic, P., Matovic, J., & Liska, R. (2012). Proton conducting fluorinated polymer nanomembrane for fuel cell applications. In European Symposium of Photopolymer Science - Book of Abstracts (p. 21). http://hdl.handle.net/20.500.12708/48040 ( reposiTUm)

Gorsche, C., Liska, R., Ligon, S., Husar, B., Mautner, A., Schwentenwein, M., Heller, C., Stampfl, J., & Russmüller, G. (2012). A new Generation of low toxic Monomers for Additive Manufacturing Technology. In E-MRS 2012 Fall Meeting. E-MRS 2012 FALL MEETING (European Materials research Society), Warschau, Poland. http://hdl.handle.net/20.500.12708/48047 ( reposiTUm)

Kellner, M., Radovanovic, P., Matovic, J., & Liska, R. (2012). Novel crosslinkers for high performance poly-AMPS-based proton exchange membranes for fuel cells. In European Symposium of Photopolymer Science - Book of Abstracts. European Symposium of Photopolymer Science - ESPS 2012, Torino, Italy. http://hdl.handle.net/20.500.12708/48045 ( reposiTUm)

Gorsche, C., Gugg, A., Moszner, N., & Liska, R. (2012). UV-Initiated Frontal Polymerization for Dental Composites. In E-Mrs 2012 Fall Meeting. E-MRS 2012 FALL MEETING (European Materials research Society), Warschau, Poland. http://hdl.handle.net/20.500.12708/48046 ( reposiTUm)

Ligon, S., Husar, B., Mautner, A., Heller, C., Schwentenwein, M., Wilke, A., Russmüller, G., Stampfl, J., & Liska, R. (2012). Biocompatible monomers for photo-based additive manufacturing technologies. In MSE 2012 Darmstadt (p. 380). http://hdl.handle.net/20.500.12708/48058 ( reposiTUm)

Susec, M., Ligon, S., Liska, R., & Krajnc, P. (2012). Photostructured Microcellular Polyesters from High Internal Phase Emulsions. In EUPOC 2012 - Porous PolymerBased Systems: From Design to Application (p. 9). http://hdl.handle.net/20.500.12708/48057 ( reposiTUm)

Liska, R. (2012). Photopolymerization and additive manufacturing technologies. In 4#^{th} Bratislava Young Polymer Scientists workshop (p. 25). http://hdl.handle.net/20.500.12708/48030 ( reposiTUm)

Li, Z., Cicha, K., Ajami, A., Rosspeintner, A., Naumov, S., Scherzer, T., Stampfl, J., & Liska, R. (2012). A Straightforward Synthesis and Structure-Property Relationship of Highly Efficient Two-photon Photoinitiators for 3D microfabrication. In European Symposium of Photopolymer Science - Book of Abstracts (p. 24). http://hdl.handle.net/20.500.12708/48034 ( reposiTUm)

Li, Z., Qin, X., Ovsianikov, A., Torgersen, J., Ajami, A., Stampfl, J., & Liska, R. (2012). 3D site-specific functionalization of matrices via multi-photon grafting and subsequent click reaction. In European Symposium of Photopolymer Science - Book of Abstracts (p. 25). http://hdl.handle.net/20.500.12708/48035 ( reposiTUm)

Qin, X., Li, Z., Ovsianikov, A., Torgersen, J., Mühleder, S., Holnthoner, W., Stampfl, J., & Liska, R. (2012). Developing biodegradable 3D hydrogel scaffolds: from synthesis to two-photon polymerization. In European Symposium of Photopolymer Science - Book of Abstracts (p. 19). http://hdl.handle.net/20.500.12708/48037 ( reposiTUm)

Wutzel, H., Mautner, A., Qin, X., Macfelda, K., Russmüller, G., Stampfl, J., & Liska, R. (2012). New monomers based on vinylcarbonates for biomedical applications. In European Symposium of Photopolymer Science - Book of Abstracts (p. 23). http://hdl.handle.net/20.500.12708/48038 ( reposiTUm)

Li, Z., Qin, X., Ovsianikov, A., Torgersen, J., Mühleder, S., Holnthoner, W., Ajami, A., Husinsky, W., Stampfl, J., & Liska, R. (2012). Water Soluble Initiators for Two-photon Polymerization. In European Symposium of Photopolymer Science - Book of Abstracts (p. 26). http://hdl.handle.net/20.500.12708/48036 ( reposiTUm)

Liska, R. (2012). Thiol-ene polymerization of biocompatible photopolymers. In European Symposium of Photopolymer Science - Book of Abstracts. European Symposium of Photopolymer Science - ESPS 2012, Turin, Italy. http://hdl.handle.net/20.500.12708/48044 ( reposiTUm)

Ligon, S., Husar, B., Wutzel, H., Hoffmann, H., Torgersen, J., & Liska, R. (2012). Assessing anti-oxygen inhibition strategies for LED-based wood coatings by FTIR. In European Symposium of Photopolymer Science - Book of Abstracts. European Symposium of Photopolymer Science - ESPS 2012, Turin, Italy. http://hdl.handle.net/20.500.12708/48042 ( reposiTUm)

Wutzel, H., Kumpfmüller, J., Stadlmann, K., Li, Z., Stampfl, J., & Liska, R. (2012). Silicon-based waveguides via two-photon induced thiol-ene polymerization. In European Symposium of Photopolymer Science. European Symposium of Photopolymer Science - ESPS 2012, Turin, Italy. http://hdl.handle.net/20.500.12708/48043 ( reposiTUm)

Susec, M., Ligon, S., Stampfl, J., Liska, R., & Krajnc, P. (2012). Stereolithography with hierarchical polymers based on high internal phase emulsions. In European Symposium of Photopolymer Science - Book of Abstracts (p. 20). http://hdl.handle.net/20.500.12708/48041 ( reposiTUm)

Ligon, S., Baudis, S., Seidler, K., Grasl, C., Schima, H., Bergmeister, H., & Liska, R. (2012). Mechanically flexible and controllably degradable electrospun thermoplastic polyurethanes for vascular prostheses. In E-Mrs 2012 Fall Meeting. E-MRS 2012 FALL MEETING (European Materials research Society), Warschau, Poland. http://hdl.handle.net/20.500.12708/48048 ( reposiTUm)

Qin, X., Li, Z., Ligon, S., Torgersen, J., Ovsianikov, A., Mühleder, S., Holnthoner, W., Stampfl, J., & Liska, R. (2012). Biodegradable 3D Hydrogel Scaffolds: Synthesis and Two-photon Polymerization. In E-Mrs 2012 Fall Meeting. E-MRS 2012 FALL MEETING (European Materials research Society), Warschau, Poland. http://hdl.handle.net/20.500.12708/48049 ( reposiTUm)

Gorsche, C., Mautner, A., Gugg, A., Qin, X., Moszner, N., Stampfl, J., Macfelda, K., Russmüller, G., & Liska, R. (2012). UV-Initiated Frontal Polymerization and Other New Advances in Radical Photopolymerization. In 18#^{th} Fusion UV Seminar 2012 - Proceedings (pp. 2–1). http://hdl.handle.net/20.500.12708/48050 ( reposiTUm)

Seyidova, N., Grasl, C., Stoiber, M., Schreiber, C., Walter, I., Seidler, K., Ligon, S., Baudis, S., Liska, R., Bernhard, D., Schima, H., & Bergmeister, H. (2012). Biocompatibility evaluation of bioresorbable substitutes. In ISACB´S Biennal Meeting 2012 - Programm (p. 49). http://hdl.handle.net/20.500.12708/48068 ( reposiTUm)

Kellner, M., Radovanovic, F., Matovic, J., & Liska, R. (2012). High Performance Proton Conducting Membranes for Fuel Cells made by Photopolymerization of Hydrolytically Stable Monomers. In Proceedings (pp. 492–494). http://hdl.handle.net/20.500.12708/48090 ( reposiTUm)

Susec, M., Liska, R., Pulko, I., & Krajnc, P. (2012). Tiol-en klik polimerizacije v makro emulzijah. In Z. Kravanja, D. Brodnjak-Voncina, & M. Bogataj (Eds.), Slovenski kemijski dnevi 2012. http://hdl.handle.net/20.500.12708/48185 ( reposiTUm)

Susec, M., Ligon, S., Liska, R., & Krajnc, P. (2012). Photopolymerised microcellular polyesters from high internal phase emulsions. In Extended Abstracts. Iupac Macro 2012, Blacksburg, United States of America (the). http://hdl.handle.net/20.500.12708/48305 ( reposiTUm)

Husar, B., Hoffmann, H., Ligon, S., Liska, R., & Wutzel, H. (2012). Assessment of effectiveness of various antioxygen inhibition strategies in LED curing. In Congress Papers. PRA´s 8th International Woodcoatings Congress, Amsterdam, Netherlands (the). PRA Coatings Technology Centre. http://hdl.handle.net/20.500.12708/48369 ( reposiTUm)

Nehl, F., Wilhelm, H., Bergmeister, H., Stampfl, J., & Liska, R. (2011). Mechanical Characteriszation of Photoelastomers for Vascular Tissue Regeneration. In ESAO-ASAIO Winter School (pp. 56–57). http://hdl.handle.net/20.500.12708/47459 ( reposiTUm)

Liska, R., Schwentenwein, M., Baudis, S., Ligon, S., Mautner, A., Gugg, A., Li, Z., Gorsche, C., Pucher, N. U., Torgersen, J., Nehl, F., Bergmeister, H., Macfelda, K., Koch, T., Russmüller, G., & Stampfl, J. (2011). 3D-Printing of Advanced Biomaterials by Additive Manufacturing Technologies. In IUPAC 9#^{th} International Conference on Advanced Polymers via Macromolecular Engineering (APME 2011) - Program and Abstract Book (p. 101). http://hdl.handle.net/20.500.12708/47670 ( reposiTUm)

Baudis, S., Nehl, F., Ligon, S., Wutzel, H., Nigisch, A., Bergmeister, H., Bernhard, D., Stampfl, J., & Liska, R. (2011). Urethane-based photoelastomers with defined cellular struchture for scaffold-based vascular tissue engineering. In IUPAC 9#^{th} International Conference on Advanced Polymers via Macromolecular Engineering (APME 2011) - Program and Abstract Book (p. 148). http://hdl.handle.net/20.500.12708/47673 ( reposiTUm)

Wutzel, H., Ligon, S., Husar, B., Dworak, C., Hoffmann, H., & Liska, R. (2011). Comparison of different chemical strategies to overcome oxygen-inhibition in LED-curing of thin films assessed by IR-spectroscopy. In IUPAC 9#^{th} International Conference on Advanced Polymers via Macromolecular Engineering (APME 2011) - Program and Abstract Book (p. 257). http://hdl.handle.net/20.500.12708/47672 ( reposiTUm)

Wutzel, H., Gugg, A., Moszner, N., & Liska, R. (2011). Chain transfer reagents for molecular weight control in radical photo-polymerization. In IUPAC 9#^{th} International Conference on Advanced Polymers via Macromolecular Engineering (APME 2011) - Program and Abstract Book (p. 260). http://hdl.handle.net/20.500.12708/47675 ( reposiTUm)

Ligon, S., Kumpfmüller, J., Li, Z., Stadlmann, K., Cicha, K., Ovsianikov, A., Ajami, A., Husinsky, W., Rosspeintner, A., Stampfl, J., & Liska, R. (2011). Real 3D writing by two photon induced polymerization. In RadTech Europe 2011 - Abstract Book (p. 78). http://hdl.handle.net/20.500.12708/47650 ( reposiTUm)

Mautner, A., Qin, X., Macfelda, K., Russmüller, G., Stampfl, J., & Liska, R. (2011). Efficient curing of vinyl esters and vinyl carbonates by thiol-ene polymerization. In RadTech Europe 2011 - Abstract Book. RadTech Europe 2011, Basel, CH, Non-EU. http://hdl.handle.net/20.500.12708/47648 ( reposiTUm)

Schwentenwein, M., Nehl, F., Wilhelm, H., Bergmeister, H., Bernhard, D., Stampfl, J., & Liska, R. (2011). Photoelastomers based on thiol-ene polymerization. In RadTech Europe 2011 - Abstract Book (p. 90). http://hdl.handle.net/20.500.12708/47649 ( reposiTUm)

Kellner, M., Radovanovic, P., Matovic, J., & Liska, R. (2011). Photopolymerization of crosslinked proton conducting membranes. In RadTech Europe 2011 - Abstract Book (p. 123). http://hdl.handle.net/20.500.12708/47652 ( reposiTUm)

Gorsche, C., Gugg, A., Moszner, N., & Liska, R. (2011). UV-initiated frontal polymerization with peracrylates. In RadTech Europe 2011 - Abstract Book. RadTech Europe 2011, Basel, CH, Non-EU. http://hdl.handle.net/20.500.12708/47647 ( reposiTUm)

Gugg, A., Wutzel, H., Moszner, N., & Liska, R. (2011). Controlled photopolymerization by addition fragmentation chain transfer agents. In RadTech Europe 2011 - Abstract Book (p. 134). http://hdl.handle.net/20.500.12708/47651 ( reposiTUm)

Schwentenwein, M., Baudis, S., Nehl, F., Ligon, S., Nigisch, A., Bergmeister, H., Blümel, A., Grogger, W., Bernhard, D., Stampfl, J., & Liska, R. (2011). Elastomeric Photopolymers by Thiol-ene Polymerization for Vascular Tissue Engineering. In The International Journal of Artificial Organs (p. 679). Wichtig Editore. http://hdl.handle.net/20.500.12708/47481 ( reposiTUm)

Seidler, K., Ligon, S., Baudis, S., Koch, T., Stampfl, J., & Liska, R. (2011). Biodegradable Thermoplastic Polyurethanes: Synthesis and Characterization of Improved TPUs. In The International Journal of Artificial Organs (p. 692). Wichtig Editore. http://hdl.handle.net/20.500.12708/47478 ( reposiTUm)

Liska, R., Schwentenwein, M., Heller, C., Stampfl, J., & Russmüller, G. (2011). Printing of a New Generation of Low Toxicity Polymers by Additive Manufacturing Technology for Bone Tissue Engineering. In The International Journal of Artificial Organs (p. 634). Wichtig Editore. http://hdl.handle.net/20.500.12708/47480 ( reposiTUm)

Kumpfmüller, J., Stadlmann, K., Li, Z., Schmid, G., Stampfl, J., & Liska, R. (2011). Two-photon-induced microfabrication of flexible optical waveguides. In Program and Technical Digest (LPM2011) (p. 104). http://hdl.handle.net/20.500.12708/47474 ( reposiTUm)

Baudis, S., Grasl, C., Bergmeister, H., Arras, M., Winter, B., Schima, H., & Liska, R. (2011). Desing of(Bio)degradable Thermoplastic Urethane-Elastomers for Electrospun Vascular Grafts. In ESAO-ASAIO Winter School (p. 33). http://hdl.handle.net/20.500.12708/47473 ( reposiTUm)

Radovanovic, P., Kellner, M., Matovic, J., & Liska, R. (2011). Novel asymmetric interpenetrating proton-conducting membrane. In ICOM 2011 (p. 642). http://hdl.handle.net/20.500.12708/47476 ( reposiTUm)

Kellner, M., Radovanovic, P., Matovic, J., & Liska, R. (2011). Proton conducting membranes based on photopolymerizable monomers. In ICOM 2011 (p. 667). http://hdl.handle.net/20.500.12708/47475 ( reposiTUm)

Ligon, S., Baudis, S., Seidler, K., Grasl, C., Schima, H., Bergmeister, H., Weigel, G., Bernhard, D., & Liska, R. (2011). Assessment of Aliphatic Thermoplastic Polyurethanes for Narrow Diameter Vascular Grafts. In The International Journal of Artificial Organs (p. 645). Wichtig Editore. http://hdl.handle.net/20.500.12708/47482 ( reposiTUm)

Ligon, S., Dworak, C., Baudis, S., Nehl, F., Wilhelm, H., Bergmeister, H., Bernhard, D., Stampfl, J., & Liska, R. (2011). Tailor-made Biomaterials for Vascular Tissue Regeneration printed by Additive Manufacturing Technologies. In Ninth International Symposium on Frontiers in Biomedical Polymers (pp. 87–88). http://hdl.handle.net/20.500.12708/47469 ( reposiTUm)

Ligon, S., Heller, C., Schwentenwein, M., Stampfl, J., Varga, F., Russmüller, G., & Liska, R. (2011). Rapid Prototyping of Bioabsorbalbe Polyvinylesters for Tissue Engineering. In ESAO-ASAIO Winter School (p. 51). http://hdl.handle.net/20.500.12708/47472 ( reposiTUm)

Liska, R., Schwentenwein, M., Heller, C., Stampfl, J., & Russmüller, G. (2011). Low toxic monomers based on vinylesters and carbonates for additive manufacturing technology. In Ninth International Symposium on Frontiers in Biomedical Polymers (p. 47). http://hdl.handle.net/20.500.12708/47467 ( reposiTUm)

Schwentenwein, M., Stampfl, J., Heller, C., Varga, F., Russmüller, G., & Liska, R. (2011). 3D-Structuring of Poly(vinyl alcohol)-based Photopolymers. In TERMIS EU 2011 Annual Meeting. Termis Eu 2011, Granada, E, EU. http://hdl.handle.net/20.500.12708/47466 ( reposiTUm)

Ligon, S., Dworak, C., Koch, T., Varga, F., & Liska, R. (2011). Photopolymerizable biocompatible polymers based on phosphorous containing vinyl esters and vinyl carbamates. In Ninth International Symposium on Frontiers in Biomedical Polymers (p. 63). http://hdl.handle.net/20.500.12708/47468 ( reposiTUm)

Schwentenwein, M., Heller, C., Stampfl, J., Varga, F., Russmüller, G., & Liska, R. (2011). New Types of Photopolymers for Regenerative Medicine. In ESAO-ASAIO Winter School (p. 66). http://hdl.handle.net/20.500.12708/47471 ( reposiTUm)

Schwentenwein, M., Heller, C., Varga, F., Russmüller, G., Stampfl, J., & Liska, R. (2011). 3d-Fabrication Of Biodegradable Poly(vinyl Alcohol)-Based. In 19#^{th} Annual Meeting of the BioEnvironmental Polymer Society (p. OP-10). http://hdl.handle.net/20.500.12708/48059 ( reposiTUm)

Radovanovic, P., Kellner, M., Matovic, J., & Liska, R. (2011). Asymmetric Sol-gel Proton-conducting Membrane. In 4M 2011 - Proceedings of the 8th International Conference on Multi-Material Micro Manufacture (pp. 230–233). Research Publishing. http://hdl.handle.net/20.500.12708/72642 ( reposiTUm)

Cicha, K., Li, Z., Mautner, A., Stadlmann, K., Torgersen, J., Pucher, N. U., Markut-Kohl, R., Liska, R., & Stampfl, J. (2011). Fabrication and evaluation of 3D-micro-structures produced using two-photon-induced photopolymerization (TPIP or 2PP) by means of optical assessment and FTIR-spectroscopy. In Conference Proceeding Euromat 2011 (p. 0453). http://hdl.handle.net/20.500.12708/66391 ( reposiTUm)

Stampfl, J., Gruber, S., Felzmann, R., Springer, S., & Liska, R. (2011). Lithographiebasierte Fertigung keramischer Bauteile. In A. Gebhardt (Ed.), Fachmesse und Anwendertagung für Rapid-Technologie (p. 4). http://hdl.handle.net/20.500.12708/66313 ( reposiTUm)

Ovsianikov, A., Torgersen, J., Liska, R., & Stampfl, J. (2011). 3D photofabrication by femtosecond laser pulses and its applications in biomedicine. In 4th European Conference on Applications of Femtosecond Lasers in Materials Science- Femto Mat (p. 4). http://hdl.handle.net/20.500.12708/66412 ( reposiTUm)

Wilke, A., Baudis, S., Wilhelm, H., Bergmeister, H., Nehl, F., Liska, R., & Stampfl, J. (2011). Additive Manufactured Photoelastomers as Tailor-made Biomaterials for Vascular Tissue Restoration. In Euromat 2011 Montpellier (pp. 0264-1–1). http://hdl.handle.net/20.500.12708/66409 ( reposiTUm)

Stampfl, J., Mitteramskogler, G., Springer, S., Gruber, S., Ovsianikov, A., & Liska, R. (2011). Lithography-based Additive Manufacturing of Cellular Ceramic and Composite Structures. In Euromat 2011 (p. 1). http://hdl.handle.net/20.500.12708/66376 ( reposiTUm)

Ovsianikov, A., Nehl, F., Baudis, S., Steyrer, B., Liska, R., & Stampfl, J. (2011). Microenvironments for the Generation of Bioartificial Tissues. In 24th European Conference on Biomaterials (p. 97). http://hdl.handle.net/20.500.12708/66414 ( reposiTUm)

Torgersen, J., Baudrimont, A., Pucher, N. U., Stadlmann, K., Cicha, K., Heller, C., Liska, R., & Stampfl, J. (2011). In Vivo Scaffold Fabrication. In D. Falkenhagen, E. F. Leonard, & S. Mikhalovsky (Eds.), Advancing Roles: Biomaterials in Artificial Organs and Regenerative Medicine (p. 70). http://hdl.handle.net/20.500.12708/66306 ( reposiTUm)

Torgersen, J., Baudrimont, A., Pucher, N. U., Stadlmann, K., Heller, C., Liska, R., & Stampfl, J. (2011). Biocompatible Materials structured in-vivo using high-resolution AMT. In Euro Biomat - European Symposium on Biomaterials and Related Areas (p. 18). http://hdl.handle.net/20.500.12708/66307 ( reposiTUm)

Kellner, M., Radovanovic, P., Matovic, J., & Liska, R. (2011). Photopolymerizable Monomer Formulations for Nanoporous Proton Conducting Membranes. In 4M 2011 - Proceedings of the 8th International Conference on Multi-Material Micro Manufacture (pp. 242–244). Research Publishing. http://hdl.handle.net/20.500.12708/72641 ( reposiTUm)

Susec, M., Ligon, S., Liska, R., & Krajnc, P. (2011). Influence of initiator and solvent on porous structure of biocompatible polymers. In M. Leitgeb & M. Primozic (Eds.), Book of Abstracts. http://hdl.handle.net/20.500.12708/48303 ( reposiTUm)

Susec, M., Liska, R., & Krajnc, P. (2011). Priprava biozdruzljivih poroznih polimerov iz multifunkcionalnih akrilatov = Preparation of biocompatible porous polymers from multifunctional acrylates. In Abstracts. Slovenski kemijski dnevi 2011, Portoroz, EU. http://hdl.handle.net/20.500.12708/48304 ( reposiTUm)

Susec, M., Ligon, S., Liska, R., & Krajnc, P. (2011). Preparation of biocompatible porous polymers from multifunctional acrylates. In Contributions to the working session with the international scientific council (pp. 45–47). http://hdl.handle.net/20.500.12708/48306 ( reposiTUm)

Krajnc, P., Susec, M., Pulko, I., & Liska, R. (2011). Towards biocompatible and biodegradable polyHIPEs. In Biobased polymers and related biomaterials : abstract booklet. EUPOC 2011, Gargnano, EU. http://hdl.handle.net/20.500.12708/48307 ( reposiTUm)

Li, Z., Siklos, M. I., Pucher, N. U., Cicha, K., Ajami, A., Husinsky, W., Rosspeintner, A., Vauthey, E., Gescheidt, G., Stampfl, J., & Liska, R. (2011). Several novel aromatic ketone-based initiators for two-photon polymerization. In RadTech Europe 2011 - Abstract Book (p. 126). http://hdl.handle.net/20.500.12708/47655 ( reposiTUm)

Husar, B., Schwentenwein, M., Heller, C., Mautner, A., Varga, F., Russmüller, G., Stampfl, J., & Liska, R. (2011). Biocompatible and biodegradable photopolymers from low cytotoxic vinyl esters. In RadTech Europe 2011 - Abstract Book (p. 118). http://hdl.handle.net/20.500.12708/47656 ( reposiTUm)

Kumpfmüller, J., Stadlmann, K., Satzinger, V., Stampfl, J., & Liska, R. (2011). Fabrication of flexible optical waveguides via two-photon induced thiol-ene polymerization. In RadTech Europe 2011 - Abstract Book (p. 124). http://hdl.handle.net/20.500.12708/47654 ( reposiTUm)

Radovanovic, P., Kellner, M., Matovic, J., & Liska, R. (2011). Asymmetric proton-conducting membrane made by photopolymerization. In RadTech Europe 2011 - Abstract Book (p. 129). http://hdl.handle.net/20.500.12708/47653 ( reposiTUm)

Koch, T., Kogler, F. R., Potzmann, R., Schubert, U., Krivec, S., Liska, R., Lichtenegger, H. C., & Seidler, S. (2011). Charakterisierung des mechanischen Verhaltens von organisch-anorganischen Hybridwerkstoffen mittels Eindruckprüfungen. In 13. Problemseminar Deformation und Bruchverhalten von Kunststoffen (p. 5). http://hdl.handle.net/20.500.12708/66422 ( reposiTUm)

Kellner, M., Radovanovic, P., Matovic, J., & Liska, R. (2010). Photopolymerisation of proton conducting biomimetic membranes. In European Symposium of Photopolymer Science. European Symposium of Photopolymer Science, Mulhouse, France, EU. http://hdl.handle.net/20.500.12708/71968 ( reposiTUm)

Siklos, M. I., Pucher, N. U., Li, Z., Cicha, K., Rosspeintner, A., Ajami, A., Gescheidt, G., Husinsky, W., Stampfl, J., & Liska, R. (2010). Structure optimization of novel initiators for two-photon polymerization (2PP) process. In Book of Abstracts. 11#^{th} International Symposium on Laser Precision Microfabrication, LPM 2010, Stuttgart, D, EU. http://hdl.handle.net/20.500.12708/46850 ( reposiTUm)

Siklos, M. I., Li, Z., Pucher, N. U., Liska, R., & Stampfl, J. (2010). New Initiators for Two-Photon Photopolymerisation. In Proceedings (pp. 211–212). http://hdl.handle.net/20.500.12708/47160 ( reposiTUm)

Kumpfmüller, J., & Liska, R. (2010). Structuring of polysiloxane-based waveguides via two-photon induced polymerization. In Proceedings (pp. 245–246). http://hdl.handle.net/20.500.12708/47158 ( reposiTUm)

Dworak, C., Griessner, M., Gescheidt, G., Grabner, G., Höfer, M., & Liska, R. (2010). Benzaldoxime esters as alternative Coinitiators for Radical Photopolymerization. In European Symposium of Photopolymer Science - Abstract Book. European Symposium of Photopolymer Science, Mulhouse, France, EU. http://hdl.handle.net/20.500.12708/47180 ( reposiTUm)

Liska, R. (2010). Photopolymerization goes 3D. In European Symposium of Photopolymer Science - Abstract Book (p. 13). http://hdl.handle.net/20.500.12708/47179 ( reposiTUm)

Zhiquan, L., Siklos, M. I., Pucher, N. U., Cicha, K., Ajami, A., Husinsky, W., Stampfl, J., & Liska, R. (2010). Synthesis and structure-activity relationship of serveral keton-based two-photon initiators. In European Symposium of Photopolymer Science - Abstract Book. European Symposium of Photopolymer Science, Mulhouse, France, EU. http://hdl.handle.net/20.500.12708/47189 ( reposiTUm)

Qin, X., Torgersen, J., Heller, C., Schwentenwein, M., Russmüller, G., Stampfl, J., & Liska, R. (2010). Two-photon induced Polymerization for 3D Microfabrication of Biocompatible and Biodegradable Hydrogels. In European Symposium of Photopolymer Science - Abstract Book. European Symposium of Photopolymer Science, Mulhouse, France, EU. http://hdl.handle.net/20.500.12708/47188 ( reposiTUm)

Husar, B., Schwentenwein, M., Heller, C., Varga, F., Russmüller, G., Stampfl, J., & Liska, R. (2010). Vinyl carbonates as low cytotoxicity monomers for fabrication of biocompatible 3d scaffolds. In European Symposium of Photopolymer Science - Abstract Book. European Symposium of Photopolymer Science, Mulhouse, France, EU. http://hdl.handle.net/20.500.12708/47185 ( reposiTUm)

Schwentenwein, M., Heller, C., Varga, F., Russmüller, G., Stampfl, J., & Liska, R. (2010). 3D fabrication of poly(vinyl alcohol)-based photopolymers for biomedical applications. In European Symposium of Photopolymer Science - Abstract Book. European Symposium of Photopolymer Science, Mulhouse, France, EU. http://hdl.handle.net/20.500.12708/47184 ( reposiTUm)

Dworak, C., Griessner, M., Gescheidt, G., Grabner, G., Jauk, S., Höfer, M., & Liska, R. (2010). Covalently linked Benzophenone-Amine Photoinitiators with a beta-phenylogous cleavage. In European Symposium of Photopolymer Science - Abstract Book. European Symposium of Photopolymer Science, Mulhouse, France, EU. http://hdl.handle.net/20.500.12708/47182 ( reposiTUm)

Baudis, S., Wilhelm, H., Bergmeister, H., Stampfl, J., & Liska, R. (2010). Additive Manufactured Photoelastomers as Tailor-made Biomaterials for Vascular Tissue Restoration. In European Symposium of Photopolymer Science - Abstract Book. European Symposium of Photopolymer Science, Mulhouse, France, EU. http://hdl.handle.net/20.500.12708/47183 ( reposiTUm)

Nehl, F., Baudis, S., Wilhelm, H., Bergmeister, H., Stampfl, J., & Liska, R. (2010). Mechanical Characterisation of Photoelastomers for Vascular Tissue Regeneration. In European Symposium of Photopolymer Science - Abstract Book. European Symposium of Photopolymer Science, Mulhouse, France, EU. http://hdl.handle.net/20.500.12708/47187 ( reposiTUm)

Dworak, C., Koch, T., Varga, F., & Liska, R. (2010). Biocompatible phosphorus-containing Polymers for Radical Photopolymerization. In European Symposium of Photopolymer Science - Abstract Book. European Symposium of Photopolymer Science, Mulhouse, France, EU. http://hdl.handle.net/20.500.12708/47181 ( reposiTUm)

Mautner, A., Stampfl, J., & Liska, R. (2010). Influence of various additives onto the rheological and mechanical behavior of photopolymers. In European Symposium of Photopolymer Science - Abstract Book. European Symposium of Photopolymer Science, Mulhouse, France, EU. http://hdl.handle.net/20.500.12708/47186 ( reposiTUm)

Qin, X., Torgersen, J., Zhiquan, L., Ovsianikov, A., Heller, C., Schwentenwein, M., Russmüller, G., Stampfl, J., & Liska, R. (2010). Two-photon induced polymerization for 3D fabrication of Biocompatible and Biodegradable hydrogels. In Tagungsband (p. 56). http://hdl.handle.net/20.500.12708/47193 ( reposiTUm)

Husar, B., Schwentenwein, M., Heller, C., Varga, F., Russmüller, G., Stampfl, J., & Liska, R. (2010). Biomaterials based on low cytotoxicity vinyl esters for bone replacement application. In Tagungsband (p. 57). http://hdl.handle.net/20.500.12708/47194 ( reposiTUm)

Baudis, S., Grasl, C., Bergmeister, H., Schima, H., Stampfl, J., & Liska, R. (2010). (Bio)abbaubare Urethan-Elastomere für Elektroversponnene Blutgefäßersatzmaterialien. In Tagungsband (p. 7). http://hdl.handle.net/20.500.12708/47191 ( reposiTUm)

Liska, R. (2010). Photopolymerization in Biomedical Applications. In Tagungsband (p. 53). http://hdl.handle.net/20.500.12708/47192 ( reposiTUm)

Torgersen, J., Baudrimont, A., Pucher, N. U., Stadlmann, K., Cicha, K., Heller, C., Liska, R., & Stampfl, J. (2010). In Vivo Writing using Two-Photon-Polymerization. In K. Sugioka (Ed.), Proceedings of LPM2010. http://hdl.handle.net/20.500.12708/46875 ( reposiTUm)

Stadlmann, K., Cicha, K., Kumpfmüller, J., Schmidt, V., Satzinger, V., Liska, R., & Stampfl, J. (2010). Fabrication of Optical Interconnects with Two Photon Polymerization. In K. Sugioka (Ed.), Proceedings of LPM2010. http://hdl.handle.net/20.500.12708/46876 ( reposiTUm)

Dworak, C., Koch, T., Varga, F., & Liska, R. (2010). Biocompatible phosphorus-containing Polymers for Radical Photopolymerization. In Book of Abstracts (pp. 76–77). http://hdl.handle.net/20.500.12708/46900 ( reposiTUm)

Mautner, A., Stampfl, J., & Liska, R. (2010). Rheological and mechanical behavior of photopolymers with different additives. In Book of Abstracts (p. 190). http://hdl.handle.net/20.500.12708/46904 ( reposiTUm)

Dworak, C., Griesser, M., Gescheidt, G., & Liska, R. (2010). Oxime esters as potential Coinitiators for Radical Photopolymerization. In Book of Abstracts (pp. 196–197). http://hdl.handle.net/20.500.12708/46901 ( reposiTUm)

Gugg, A., Moszner, N., & Liska, R. (2010). Chain Transfer Reagents in Radical Photopolymerization. In Book of Abstracts (pp. 194–195). http://hdl.handle.net/20.500.12708/46903 ( reposiTUm)

Kellner, M., Radovanovic, P., Matovic, J., & Liska, R. (2010). Proton conducting biomimetic membranes based on sulfonic polymeres. In Book of Abstracts (pp. 120–121). http://hdl.handle.net/20.500.12708/46893 ( reposiTUm)

Liska, R. (2010). 3D Photopolymerization. In Book of Abstracts (p. 28). http://hdl.handle.net/20.500.12708/46891 ( reposiTUm)

Baudis, S., Grasl, C., Bergmeister, H., Arras, M., Winter, B., Schima, H., & Liska, R. (2010). (bio)degradable Urethane-Elastomers For Electrospun Vascular Grafts. In The International Journal of Artificial Organs Vol. 33/No. 7 (2010 July), Abstracts from the XXXVII ESAO Congress (p. 467). Wichtig Editore. http://hdl.handle.net/20.500.12708/46906 ( reposiTUm)

Baudis, S., & Liska, R. (2010). Two Approaches for the Development of Materials for Vascular Tissue Regeneration. In Proceedings (pp. 271–272). http://hdl.handle.net/20.500.12708/46793 ( reposiTUm)

Heller, C., Qin, X., Schwentenwein, M., Russmüller, G., Varga, F., Liska, R., & Stampfl, J. (2010). 3D-Photopolymere auf Basis vonPolyvinylalkohol: Von der Synthese zur in-vivo-Anwendung. In J. Stampfl (Ed.), Tagungsband (p. 3). http://hdl.handle.net/20.500.12708/66164 ( reposiTUm)

Torgersen, J., Baudrimont, A., Pucher, N. U., Stadlmann, K., Cicha, K., Heller, C., Liska, R., & Stampfl, J. (2010). In Vivo Nanostructuring of Biocompatible Materials. In BioNanoMed 2010 (p. 12). http://hdl.handle.net/20.500.12708/66201 ( reposiTUm)

Torgersen, J., Baudrimont, A., Pucher, N. U., Stadlmann, K., Cicha, K., Heller, C., Liska, R., & Stampfl, J. (2010). In-Vivo-Writing mittels Zweiphotonenlithographie. In Tagungsband- 4. Wiener Biomaterialsymposium (p. 24). http://hdl.handle.net/20.500.12708/66202 ( reposiTUm)

Baudis, S., Wilhelm, H., Bergmeister, H., Stampfl, J., & Liska, R. (2010). Generativ gefertigte Photoelastomere als maßgeschneiderte Biomaterialien für vaskuläre Geweberegeneration. In J. Stampfl (Ed.), Tagungsband (p. 6). http://hdl.handle.net/20.500.12708/66268 ( reposiTUm)

Russmüller, G., Liska, R., Moser, D., Stampfl, J., Schopper, C., & Ewers, R. (2010). Knochenregeneration mittels Photopolymeren - erste in-vivo-Ergebnisse. In J. Stampfl (Ed.), Tagungsband (p. 16). http://hdl.handle.net/20.500.12708/66270 ( reposiTUm)

Tesavibul, P., Patzer, J., Felzmann, R., Liska, R., & Stampfl, J. (2010). Customized ceramic implants made by lithography based additive manufacturing. In J. Stampfl (Ed.), Tagungsband (p. 25). http://hdl.handle.net/20.500.12708/66272 ( reposiTUm)

Torgersen, J., Baudrimont, A., Pucher, N. U., Stadlmann, K., Cicha, K., Heller, C., Stampfl, J., & Liska, R. (2010). Poster F5-64 In-Vivo Writing using Two-Photon-Polymerization as Enabling Technology for Making Use of Bio-inspired Structures. In Tagungsband Material science and engineering 2010 (p. 45). http://hdl.handle.net/20.500.12708/66277 ( reposiTUm)

Stadlmann, K., Cicha, K., Kumpfmüller, J., Liska, R., Stampfl, J., Hinze, U., & Chichkov, B. (2010). Development of a two Photon Polymerization setup for Structuring optical Waveguides with High Throughput. In Tagungsband Material science and engineering 2010 (p. 32). http://hdl.handle.net/20.500.12708/66281 ( reposiTUm)

Li, Z., Siklos, M. I., Cicha, K., Ajami, A., Husinsky, W., Stampfl, J., & Liska, R. (2010). C4-303 Synthesis and Structure-Activity Relationship of Several Novel Two-Photon Initiators based on a D-pi-A-pi-D Chromophor. In Tagungsband Material science and engineering 2010 (p. 40). http://hdl.handle.net/20.500.12708/66284 ( reposiTUm)

Pucher, N. U., Siklos, M. I., Rosspeintner, A., Ajami, A., Cicha, K., Gscheidt, G., Husinsky, W., Stampfl, J., & Liska, R. (2010). Optimization of feature resolution, processing window & structuring time for the two-photon polymerization (2PP) process by the use of novel initiators. In Proceedings of LPM2010 (pp. 1–6). http://hdl.handle.net/20.500.12708/167594 ( reposiTUm)

Pucher, N. U., Satzinger, V., Rosspeintner, A., Heller, C., Gescheidt, G., Schmidt, V., Stampfl, J., & Liska, R. (2009). Novel Highly Potential Initiators for the Two-Photon-Induced Photopolymerization Process. In Mater. Res. Soc. Symp. Proc. (p. 6). Material Research Society. http://hdl.handle.net/20.500.12708/46522 ( reposiTUm)

Heller, C., Schwentenwein, M., Varga, F., Russmüller, G., Stampfl, J., & Liska, R. (2009). 3D Fabrication of Poly(vinyl alcohol) based monomers. In 13. Österreichische Chemietage. 13. Österreichische Chemietage, Wien, Austria. http://hdl.handle.net/20.500.12708/46745 ( reposiTUm)

Gugg, A., Ganster, B., Moszner, N., & Liska, R. (2009). New Visible Light Photoinitiators for Dental Composites. In 13. Österreichische Chemietage. 13. Österreichische Chemietage, Wien, Austria. http://hdl.handle.net/20.500.12708/46746 ( reposiTUm)

Heller, C., Schwentenwein, M., Baudis, S., Thaler, R., Varga, F., Stampfl, J., & Liska, R. (2009). 3D Fabrication of new poly(vinyl alcohol) based Scaffolds for Tissue Engineering. In Radtech Europe 2009, Proceedings (p. 7). http://hdl.handle.net/20.500.12708/46734 ( reposiTUm)

Dworak, C., Kopeinig, S., Hoffmann, H., & Liska, R. (2009). Hydroxylamine-based monomers. In Radtech Europe 2009, Proceedings (p. 8). http://hdl.handle.net/20.500.12708/46735 ( reposiTUm)

Liska, R., Bergmeister, H., Baudis, S., Dworak, C., Heller, C., Moszner, N., Porodec, M., Pucher, N. U., Russmüller, G., Schmidt, V., Schulz-Siegmund, M., Schwentenwein, M., Stampfl, J., Varga, F., & Weigel, G. (2009). Monomers and Photoinitiators for Biomedical Applications. In Radtech Europe 2009, Proceedings (p. 8). http://hdl.handle.net/20.500.12708/46728 ( reposiTUm)

Pucher, N. U., Rosspeintner, A., Kontur, S., Ajami, A., Husinsky, W., Gescheidt, G., Stampfl, J., & Liska, R. (2009). Photochemistry and Photophysics of Two-Photon Initiators. In Radtech Europe 2009, Proceedings (p. 6). http://hdl.handle.net/20.500.12708/46727 ( reposiTUm)

Gugg, A., Ganster, B., Neshchadin, D., Griesser, M., Hametner, C., Saf, R., Moszner, N., Gescheidt, G., & Liska, R. (2009). Mechanistic Investigations on Germanium-based Photoinitiators. In Radtech Europe 2009, Proceedings (p. 9). http://hdl.handle.net/20.500.12708/46726 ( reposiTUm)

Liska, R., Pucher, N. U., Heller, C., Schwentenwein, M., Inführ, R., Satzinger, V., Gescheidt, G., Schmidt, V., Varga, F., & Stampfl, J. (2009). Materials for Stereolithography of Optical and Medical Devices. In EPF’09, Book of Abstracts (p. 192). http://hdl.handle.net/20.500.12708/46748 ( reposiTUm)

Dworak, C., Karasu, F., & Liska, R. (2009). Self-initiating Monomers. In EPF’09, Book of Abstracts (p. 227). http://hdl.handle.net/20.500.12708/46749 ( reposiTUm)

Kumpfmüller, J., Pucher, N. U., Stadlmann, K., Stampfl, J., & Liska, R. (2009). Photo-induced Waveguide formation in Polysiloxanes. In Radtech Europe 2009, Proceedings (p. 7). http://hdl.handle.net/20.500.12708/46742 ( reposiTUm)

Schwentenwein, M., Heller, C., Stampfl, J., Varga, F., & Liska, R. (2009). Biocompatible and Biodegradable monomers based on Oligoethylene glycols with different polymerizable groups. In Radtech Europe 2009, Proceedings (p. 6). http://hdl.handle.net/20.500.12708/46741 ( reposiTUm)

Rosspeintner, A., Pucher, N. U., Griesser, M., Liska, R., & Gescheidt, G. (2009). Mechanistic Investigation on Novel Two-Photon Absorbing Photoinitiators. In Book of Abstracts (p. 483). http://hdl.handle.net/20.500.12708/46743 ( reposiTUm)

Kumpfmüller, J., Stadlmann, K., Inführ, R., Pucher, N. U., Stampfl, J., & Liska, R. (2009). Two-Photon-Induced Waveguide Formation In Polysiloxanes. In 13. Österreichische Chemietage (p. 14). http://hdl.handle.net/20.500.12708/47162 ( reposiTUm)

Baudis, S., Schwentenwein, M., Pulka, T., Steyrer, B., Wilhelm, H., Weigel, G., Bergmeister, H., Stampfl, J., & Liska, R. (2009). Studies on the mechanical behaviour of Photoelastomers for Vascular Tissue Regeneration. In Radtech Europe 2009, Proceedings (p. 6). http://hdl.handle.net/20.500.12708/46739 ( reposiTUm)

Pucher, N. U., Rosspeintner, A., Satzinger, V., Schmidt, V., Gescheidt, G., Stampfl, J., & Liska, R. (2009). Evaluation of Triple Bond Containing Photoinitiators for the Two-Photon Induced Photopolymerization Process. In Radtech Europe 2009, Proceedings (p. 6). http://hdl.handle.net/20.500.12708/46738 ( reposiTUm)

Schwentenwein, M., Heller, C., Stampfl, J., & Liska, R. (2009). Rapid Prototyping of Biocompatible and Biodegradable monomers. In Radtech Europe 2009, Proceedings (p. 8). http://hdl.handle.net/20.500.12708/46737 ( reposiTUm)

Dworak, C., Varga, F., & Liska, R. (2009). Phosphorus-based Monomers for radical polymerization. In Radtech Europe 2009, Proceedings (p. 8). http://hdl.handle.net/20.500.12708/46740 ( reposiTUm)

Höfer, M., Landertshamer, S., & Liska, R. (2009). Cationic Photoinitiators based on Phenylethynyl onium salts. In Radtech Europe 2009, Proceedings (p. 9). http://hdl.handle.net/20.500.12708/46730 ( reposiTUm)

Gugg, A., Ganster, B., Moszner, N., & Liska, R. (2009). Investigations on Acylsilanes as Photoinitiator for Radical Polymerization. In Radtech Europe 2009, Proceedings (p. 8). http://hdl.handle.net/20.500.12708/46732 ( reposiTUm)

Heller, C., Schwentenwein, M., Liska, R., Stampfl, J., Varga, F., Porodec, M., Schulz-Siegmund, M., & Russmüller, G. (2009). New 3D-Biophotopolymers with Selective Surface-cell Interactions for Regnerative Medicine. In E-MRS 2008 spring meeting. MRS Fall Meeting 2009, Boston, MA, USA, Non-EU. http://hdl.handle.net/20.500.12708/46731 ( reposiTUm)

Dworak, C., Jauk, S., Liska, R., Neshchadin, D., Rosspeintner, A., & Gescheidt, G. (2009). Photoinitiators with β-phenylogous cleavage. In Radtech Europe 2009, Proceedings (p. 7). http://hdl.handle.net/20.500.12708/46733 ( reposiTUm)

Dworak, C., Kopeinig, S., Karasu, F., Hummer-Koppendorfer, E., & Liska, R. (2009). Self-Initiating Monomers based on Acrylamides. In Radtech Europe 2009, Proceedings (p. 7). http://hdl.handle.net/20.500.12708/46729 ( reposiTUm)

Stampfl, J., Heller, C., Schwentenwein, M., Russmüller, G., Varga, F., & Liska, R. (2009). Biophotopolymers for stereolithography and two-photon lithography. In F. Emmrich (Ed.), Regenerative Medicine (pp. S58–S59). Future Medicine. http://hdl.handle.net/20.500.12708/65977 ( reposiTUm)

Inführ, R., Pucher, N. U., Lichtenegger, H. C., Liska, R., Schmidt, V., Satzinger, V., Galler, N., Stadlmann, K., & Stampfl, J. (2009). Refractive Index Patterning of Flexible Waveguide Materials by Means of Two‑Photon 3D Lithography. In W. J. Bartz (Ed.), Nano-Technology (pp. 503–508). http://hdl.handle.net/20.500.12708/65979 ( reposiTUm)

Heller, C., Schwentenwein, M., Varga, F., Liska, R., & Stampfl, J. (2009). Biocompatible and biodegradable photopolymers for microstereolithography. In I. Miyamoto (Ed.), Proceedings of LAMP2009 (p. 5). Japan Laser Processing Society. http://hdl.handle.net/20.500.12708/65953 ( reposiTUm)

Heller, C., Schwentenwein, M., Pucher, N. U., Stadlmann, K., Koch, T., Varga, F., Stampfl, J., & Liska, R. (2009). 3D fabrication of new poly(vinyl alcohol) based Scaffolds for Tissue Engineering. In D. Helsby (Ed.), UV/EB- Sustainable Technology. http://hdl.handle.net/20.500.12708/66047 ( reposiTUm)

Stampfl, J., Heller, C., Schwentenwein, M., Baudis, S., Varga, F., & Liska, R. (2009). Entwicklung nicht-toxischer Biophotopolymere für die generative Fertigung. In W. Grellmann (Ed.), Tagungsband Deformation und Bruch (p. 4). http://hdl.handle.net/20.500.12708/65924 ( reposiTUm)

Stampfl, J., Inführ, R., Stadlmann, K., Pucher, N. U., Lichtenegger, H. C., Schmidt, V., & Liska, R. (2009). Materials for the fabrication of optical waveguides with two photon photopolymerization. In A. Ostendorf (Ed.), Lasers in Manufacturing 2009 (pp. P1–P4). AT Fachverlag GmbH. http://hdl.handle.net/20.500.12708/65919 ( reposiTUm)

Heller, C., Schwentenwein, M., Porodec, M., Schulz-Siegmund, M., Stampfl, J., Varga, F., & Liska, R. (2009). Poly(vinyl alcohol) based monomers for lithography-based 3D fabrication. In O. Dössel & W. Schlegel (Eds.), IFMBE Proceedings (p. 4). http://hdl.handle.net/20.500.12708/65912 ( reposiTUm)

Stampfl, J., Heller, C., Schwentenwein, M., Varga, F., & Liska, R. (2009). Biocompatible and biodegradeable photopolymers for lithography based solid freeform fabrication. In F. Stelzer (Ed.), Book of Abstracts (p. 208). http://hdl.handle.net/20.500.12708/65928 ( reposiTUm)

Inführ, R., Stampfl, J., Krivec, S., Liska, R., Lichtenegger, H. C., Satzinger, V., Schmidt, V., Matsko, N., & Grogger, W. (2009). 3D-structuring of optical waveguides with two photon polymerization. In S. M. Kuebler & V. T. Milam (Eds.), Material Systems and Processes for Three-Dimensional Micro- and Nanoscale Fabrication and Lithography (p. 7). http://hdl.handle.net/20.500.12708/65938 ( reposiTUm)

Pucher, N. U., Krivec, S., Matsko, N., Galler, N., Koch, T., Satzinger, V., Schmidt, V., Grogger, W., Lichtenegger, H. C., & Liska, R. (2009). Photopolymerizable Waveguides in Flexible Sol-Gel Cladding Materials. In Radtech Europe 2009, Proceedings (p. 6). http://hdl.handle.net/20.500.12708/46736 ( reposiTUm)

Heller, C., Schuster, M., Baudis, S., Turecek, C., Varga, F., Bergmeister, H., Weigel, G., Stampfl, J., & Liska, R. (2008). New Materials for 3D-Scaffolds for Tissue Engineering Applications. In Abstracts from TERMIS-EU 2008 Meeting (p. 761). Tissue Engineering, Part A. http://hdl.handle.net/20.500.12708/46747 ( reposiTUm)

Heller, C., Schwentenwein, M., Baudis, S., Turecek, C., Varga, F., Stampfl, J., & Liska, R. (2008). Polyvinylalkohol basierende Photopolymere für die generative Fertigung von Gerüststrukturen für Tissue Engineering. In 3. Wiener Biomaterialsymposium - Tagungsband (p. 3). http://hdl.handle.net/20.500.12708/65826 ( reposiTUm)

Baudis, S., Schuster, M., Heller, C., Turecek, C., Varga, F., Bergmeister, H., Weigel, G., Stampfl, J., & Liska, R. (2008). Photoelastomere als biokompatible Blutgefäßersatzmaterialien. In 3. Wiener Biomaterialsymposium - Tagungsband (p. 41). http://hdl.handle.net/20.500.12708/65827 ( reposiTUm)

Porodec, M., Heller, C., Liska, R., Stampfl, J., Hacker, M., & Schulz-Siegmund, M. (2008). Surface Immobilization of model protein onto new photo cross-linkable materials. In 3. Wiener Biomaterialsymposium - Tagungsband (p. 60). http://hdl.handle.net/20.500.12708/65829 ( reposiTUm)

Stampfl, J., Heller, C., Schuster, M., Baudis, S., Homa, J., & Liska, R. (2008). Biofunktionelle Photopolymere für die generative Fertigung. In Tagungsband (p. 4). http://hdl.handle.net/20.500.12708/65745 ( reposiTUm)

Pucher, N. U., Inführ, R., Bashir, S., Satzinger, V., Schmidt, V., Husinsky, W., Lichtenegger, H. C., Stampfl, J., & Liska, R. (2008). Two-Photon Induced Photopolymerization - A Powerful Tool for Precise 3D Submicrofabrication. In 9#^{th} Austrian Polymer Meeting, Book of Abstracts (p. 11). http://hdl.handle.net/20.500.12708/46176 ( reposiTUm)

Heller, C., Schuster, M., Baudis, S., Turecek, C., Varga, F., Bergmeister, H., Weigel, G., Stampfl, J., & Liska, R. (2008). 3d-Fabrication of Photopolymers as Scaffolds for Tissue Engineering using Rapid Prototyping. In 9#^{th} Austrian Polymer Meeting, Book of Abstracts (p. 10). http://hdl.handle.net/20.500.12708/46175 ( reposiTUm)

Liska, R., Heller, C., Baudis, S., Schuster, M., Turecek, C., Bergmeister, H., Weigel, G., Schulz, M., Stampfl, J., & Varga, F. (2008). Biocompatible and biodegradable Photopolymers for Rapid Prototyping. In International Workshop on Biomacromolecules 2008, Book of Abstracts. International Workshop on Biomacromolecules 2008, Stockholm, S, EU. http://hdl.handle.net/20.500.12708/46173 ( reposiTUm)

Gescheidt, G., Neshchadin, D., Griesser, M., & Liska, R. (2008). Insights Into Early Stages of Radical Polymerization by NMR The CIDNP Effect as a Mechanistic Tool. In 9#^{th} Austrian Polymer Meeting, Book of Abstracts (p. 29). http://hdl.handle.net/20.500.12708/46177 ( reposiTUm)

Dworak, C., Kopeinig, S., Hoffmann, H., & Liska, R. (2008). Photoinitiating Monomers based on Di- and Trifunctional Acrylates. In 9#^{th} Austrian Polymer Meeting, Book of Abstracts (p. 76). http://hdl.handle.net/20.500.12708/46189 ( reposiTUm)

Baudis, S., Schuster, M., Heller, C., Turecek, C., Varga, F., Bergmeister, H., Weigel, G., Stampfl, J., & Liska, R. (2008). Flexible, Biocompatible Photopolymers as Artificial Vascular Grafts. In 9#^{th} Austrian Polymer Meeting, Book of Abstracts (p. 61). http://hdl.handle.net/20.500.12708/46191 ( reposiTUm)

Höfer, M., & Liska, R. (2008). Red-shifted Cationic Photoinitiators with selective Cleavage Mechanism. In 9#^{th} Austrian Polymer Meeting, Book of Abstracts (p. 74). http://hdl.handle.net/20.500.12708/46190 ( reposiTUm)

Karasu, F., Balta, D. K., Liska, R., & Arsu, N. (2008). Photoinitiated polymerization of β-Cyclodextrin/ Methyl Methacrylate Host / Guest complex in the Presence of Water Soluble Photoinitiator. In 9#^{th} Austrian Polymer Meeting, Book of Abstracts (p. 103). http://hdl.handle.net/20.500.12708/46184 ( reposiTUm)

Karasu, F., Dworak, C., Kopeinig, S., Hummer-Koppendorfer, E., Arsu, N., & Liska, R. (2008). Photoinitiating Monomers based on Diacrylamides. In 9#^{th} Austrian Polymer Meeting, Book of Abstracts (p. 107). http://hdl.handle.net/20.500.12708/46182 ( reposiTUm)

Gugg, A., Ganster, B., Fischer, U. K., Moszner, N., & Liska, R. (2008). Acylgermanium Derivatives as New Visible Light Photoinitiators for Dental Materials. In 9#^{th} Austrian Polymer Meeting, Book of Abstracts (p. 99). http://hdl.handle.net/20.500.12708/46185 ( reposiTUm)

Liska, R., Schuster, M., Heller, C., Baudis, S., Pucher, N. U., Turecek, C., Schmidt, V., Bergmeister, H., Stampfl, J., Varga, F., & Weigel, G. (2008). New concepts of biocompatible and biodegradable photopolymers. In European Coatings Conference: “MEDICAL COATINGS AND ADHESIVES” Proceedings (pp. 117–127). http://hdl.handle.net/20.500.12708/46160 ( reposiTUm)

Satzinger, V., Schmidt, V., Kuna, L., Inführ, R., Liska, R., & Krenn, J. R. (2008). Rapid prototyping of micro-optics on organic light emitting diodes and organic photo cells by means of two-photon 3D lithography and nano-imprint lithography. In Proceedings of SPIE. SPIE Photonics Europe 2008, Strasbourg, F, EU. http://hdl.handle.net/20.500.12708/46193 ( reposiTUm)

Schuster, M., Turecek, C., Varga, F., Weigel, G., Stampfl, J., Inführ, R., Heller, C., Baudis, S., & Liska, R. (2008). Fundamental investigations towards a new bone replacement material containing gelatin photopolymers. In International Workshop on Biomacromolecules 2008, Book of Abstracts. International Workshop on Biomacromolecules 2008, Stockholm, S, EU. http://hdl.handle.net/20.500.12708/46199 ( reposiTUm)

Porodec, M., Heller, C., Liska, R., Stampfl, J., & Hacker, M. (2008). Covalent modification of photo-cross-linkable polymers for bone tissue engineering using a model protein. In International Workshop on Biomacromolecules 2008, Book of Abstracts. International Workshop on Biomacromolecules 2008, Stockholm, S, EU. http://hdl.handle.net/20.500.12708/46198 ( reposiTUm)

Pucher, N. U., Baudis, S., Heller, C., Schuster, M., Satzinger, V., Schmidt, V., Lichtenegger, H. C., Stampfl, J., & Liska, R. (2008). Fabrication of Biocompatible and Cellular Polymers with Sub-Micrometer Feature Resolution by means of Two-Photon Induced Photopolymerization. In International Workshop on Biomacromolecules 2008, Book of Abstracts. International Workshop on Biomacromolecules 2008, Stockholm, S, EU. http://hdl.handle.net/20.500.12708/46196 ( reposiTUm)

Heller, C., Schwentenwein, M., Baudis, S., Turecek, C., Varga, F., Stampfl, J., & Liska, R. (2008). 3D Fabrication of new poly(vinyl alcohol) based scaffolds for Tissue Engineering and Regeneration. In International Workshop on Biomacromolecules 2008, Book of Abstracts. International Workshop on Biomacromolecules 2008, Stockholm, S, EU. http://hdl.handle.net/20.500.12708/46197 ( reposiTUm)

Baudis, S., Schuster, M., Heller, C., Turecek, C., Varga, F., Bergmeister, H., Weigel, G., Stampfl, J., & Liska, R. (2008). Tailored Photoelastomers as Biocompatible Blood Vessel Substitutes. In International Workshop on Biomacromolecules 2008, Book of Abstracts. International Workshop on Biomacromolecules 2008, Stockholm, S, EU. http://hdl.handle.net/20.500.12708/46200 ( reposiTUm)

Sandholzer, M., Schuster, M., Liska, R., Turecek, C., Varga, F., & Slugovc, C. (2008). ROMP Based Macroinitiator-Coinitiator Systems With Improved Migration Stability. In 9#^{th} Austrian Polymer Meeting, Book of Abstracts (p. 106). http://hdl.handle.net/20.500.12708/46183 ( reposiTUm)

Slugovc, C., Sandholzer, M., Schuster, M., Varga, F., & Liska, R. (2008). A Romp-based photoinitiator-coinitiator system with improved migration stability. In International Workshop on Biomacromolecules 2008, Book of Abstracts. International Workshop on Biomacromolecules 2008, Stockholm, S, EU. http://hdl.handle.net/20.500.12708/46201 ( reposiTUm)

Ajami, A., Rafique, M. S., Pucher, N. U., Bashir, S., Husinsky, W., Liska, R., Inführ, R., Lichtenegger, H., Stampfl, J., & Lüftenegger, S. (2008). Z-scan measurements of two-photon absorption for ultrashort laser radiation. In T. Dreischuh, E. Taskova, E. Borisova, & A. Serafetinides (Eds.), 15th International School on Quantum Electronics: Laser Physics and Applications (Issue 70271H, pp. 1–8). SPIE. https://doi.org/10.1117/12.822530 ( reposiTUm)

Krivec, S., Liska, R., & Lichtenegger, H. C. (2008). Sol-Gel Materials as Carrier for Polymeric Waveguides. In 9#^{th} Austrian Polymer Meeting, Book of Abstracts (p. 83). http://hdl.handle.net/20.500.12708/46187 ( reposiTUm)

Inführ, R., Pucher, N., Heller, C., Lichtenegger, H. C., Schmidt, V., Satzinger, V., Kuna, L., Haase, A., Stampfl, J., & Liska, R. (2007). Refractive Index Patterning of Polymeric Waveguide Materials. In RadTech Europe 2007 - Conference Proceedings (p. 7). http://hdl.handle.net/20.500.12708/65634 ( reposiTUm)

Stampfl, J., Schuster, M., Heller, C., Liska, R., Turecek, C., & Varga, F. (2007). Entwicklung und mechanische Charakterisierung bioabbaubarer Photopolymere. In Tagungsband (p. 6). http://hdl.handle.net/20.500.12708/65556 ( reposiTUm)

Schuster, M., Turecek, C., Heller, C., Varga, F., Stampfl, J., & Liska, R. (2007). 3D-Structuring of Gelatine based Photopolymers. In RadTech Europe 2007 - Conference Proceedings (p. 6). http://hdl.handle.net/20.500.12708/65636 ( reposiTUm)

Baudis, S., Schuster, M., Heller, C., Turecek, C., Varga, F., Bergmeister, H., Weigel, G., Stampfl, J., & Liska, R. (2007). Flexible, biocompatible Photopolymers as Synthetic Vascular Replacement Materials. In RadTech Europe 2007 - Conference Proceedings (p. 6). http://hdl.handle.net/20.500.12708/65637 ( reposiTUm)

Stampfl, J., Schuster, M., Baudis, S., Lichtenegger, H. C., Liska, R., Turecek, C., & Varga, F. (2007). Biodegradable stereolithography resins with defined mechanical properties. In P. J. Bartolo (Ed.), Virtual and Rapid Manufacturing (pp. 283–288). Taylor and Francis. http://hdl.handle.net/20.500.12708/65585 ( reposiTUm)

Pucher, N., Heller, C., Seidl, B., Inführ, R., Kuna, L., Haase, A., Schmidt, V., Lichtenegger, H. C., Stampfl, J., & Liska, R. (2007). Two Photon Initiated Polymerization by Inones. In RadTech Europe 2007 - Conference Proceedings (p. 7). http://hdl.handle.net/20.500.12708/65635 ( reposiTUm)

Schuster, M., Turecek, C., Stampfl, J., Varga, F., & Liska, R. (2007). Biofunctional Photopolymers for Micro-Stereolithography. In Proceedings of LPM2007 (p. 5). http://hdl.handle.net/20.500.12708/45963 ( reposiTUm)

Ganster, B., Fischer, U. K., Rheinberger, V., Moszner, N., & Liska, R. (2007). New visible light PIs for Dental Materials. In RadTech Europe 2007 Conference Proceedings (p. 8). http://hdl.handle.net/20.500.12708/46008 ( reposiTUm)

Liska, R., Ganster, B., Höfer, M., Heller, C., Kopeinig, S., Hummer-Koppendorfer, E., & Moszner, N. (2007). Photoinitiators with bathochromic shift. In RadTech Europe 2007 Conference Proceedings (p. 7). http://hdl.handle.net/20.500.12708/46005 ( reposiTUm)

Höfer, M., Moszner, N., & Liska, R. (2007). Singlet Oxygen Reactive Components for Radiation Curable Formulations. In RadTech Europe 2007 Conference Proceedings (p. 7). http://hdl.handle.net/20.500.12708/46006 ( reposiTUm)

Ganster, B., Ullrich, G., Salz, U., Moszner, N., & Liska, R. (2007). Water-Soluble Bisacylphosphin oxides for the Photopolymerization of acidic aqueous Dental Formulations. In RadTech Europe 2007 Conference Proceedings (p. 7). http://hdl.handle.net/20.500.12708/46009 ( reposiTUm)

Höfer, M., Heller, C., & Liska, R. (2007). New Sulfonium Salt based Photoinitiators for Cationic Photopolymerization. In RadTech Europe 2007 Conference Proceedings (p. 7). http://hdl.handle.net/20.500.12708/46010 ( reposiTUm)

Kopeinig, S., Gruber, H., Hummer-Koppendorfer, E., & Liska, R. (2007). New Monomers for radiation curable formulations. In RadTech Europe 2007 Conference Proceedings (p. 7). http://hdl.handle.net/20.500.12708/46012 ( reposiTUm)

Jauk, S., & Liska, R. (2007). New Derivatives of Covalently linked Benzophenone-Amine based Photoinitiato. In RadTech Europe 2007 Conference Proceedings (p. 7). http://hdl.handle.net/20.500.12708/46011 ( reposiTUm)

Turecek, C., Schuster, M., Baudis, S., Liska, R., Stampfl, J., & Varga, F. (2007). Evaluation of biophotopolymers for bone replacement materials capabe for rapid prototyping. In D. Falkenhagen (Ed.), The International Journal of Artificial Organs, Abstracts of the XXXIV ESAO Congress (p. 723). The International Journal of Artificial Organs. http://hdl.handle.net/20.500.12708/46014 ( reposiTUm)

Kopeinig, S., Gruber, H., Hummer-Koppendorfer, E., & Liska, R. (2007). Photopolymerization of Silicone Acrylamides and Acrylates. In RadTech Europe 2007 Conference Proceedings (p. 7). http://hdl.handle.net/20.500.12708/46013 ( reposiTUm)

Schuster, M., Turecek, C., Stampfl, J., Varga, F., & Liska, R. (2007). Biophotopolymers for hard tissue replacement. In D. Falkenhagen (Ed.), The International Journal of Artificial Organs, Abstracts of the XXXIV ESAO Congress (p. 705). The International Journal of Artificial Organs. http://hdl.handle.net/20.500.12708/46015 ( reposiTUm)

Baudis, S., Schuster, M., Turecek, C., Bergmeister, H., Weigel, G., Stampfl, J., Varga, F., & Liska, R. (2007). Development of flexible biocompatible photopolymers as artificial vascular replacement materials. In D. Falkenhagen (Ed.), The International Journal of Artificial Organs, Abstracts of the XXXIV ESAO Congress (p. 705). The International Journal of Artificial Organs. http://hdl.handle.net/20.500.12708/46004 ( reposiTUm)

Sandholzer, M., Schuster, M., Liska, R., Turecek, C., Varga, F., Stelzer, F., & Slugovc, C. (2007). Ring opening metathesis polymers as macroinitiator-coinitiator systems for the photopolymerization of acrylates. In Abstracts of Papers (p. 2). http://hdl.handle.net/20.500.12708/45962 ( reposiTUm)

Schuster, M., Sandholzer, M., Turecek, C., Varga, F., Slugovc, C., & Liska, R. (2007). Synthesis and Evaluation of Eosin-based Photoinitiators with Improved Migration Stability. In RadTech Europe 2007 Conference Proceedings (p. 7). http://hdl.handle.net/20.500.12708/46007 ( reposiTUm)

Inführ, R., Fritscher, C., Schmidt, V., Kuna, L., Liska, R., Lichtenegger, H. C., & Stampfl, J. (2006). Structuring methods capable of building 3D parts with feature resolutions from 50 µm to 100 nm. In Junior Scientist Conference 2006. Proceedings (pp. 131–132). http://hdl.handle.net/20.500.12708/65380 ( reposiTUm)

Fritscher, C., Lichtenegger, H. C., Stampfl, J., Hüsing, N., Liska, R., Inführ, R., Koch, T., & Seidler, S. (2006). Hierarchisch strukturiertes Siliziumdioxid und seine mechanischen Eigenschaften. In 2. Wiener Biomaterialsymposium (p. 9). http://hdl.handle.net/20.500.12708/65512 ( reposiTUm)

Liska, R., Schuster, M., Seidl, B., Inführ, R., Fritscher, C., Stampfl, J., Lichtenegger, H. C., Turecek, C., Varga, F., Schmidt, V., Kuna, L., & Haase, A. (2006). New Photopolymers for Rapid Prototyping. In Radcure Coatings and Inks: Cost & Performance (pp. 1–8). PRA Coatings Technology Centre. http://hdl.handle.net/20.500.12708/65470 ( reposiTUm)

Pucher, N., Heller, C., Seidl, B., Kuna, L., Haase, A., Schmidt, V., Lichtenegger, H. C., Stampfl, J., & Liska, R. (2006). New Initiators for Two-Photon Photopolymerization. In 8th Austrian Polymer Meeting - The Chain of Knowledge - From Catalyst to Application. 8th Austrian Polymer Meeting, Johannes Kepler University, Linz, Austria. http://hdl.handle.net/20.500.12708/65665 ( reposiTUm)

Stampfl, J., Schuster, M., Inführ, R., Liska, R., Luxner, M., Pettermann, H. E., Varga, F., & Turecek, C. (2006). Rapid Prototyping als Fertigungswerkzeug zur Herstellung zellularer Strukturen. In 52. Metallkunde-Kolloquium: Werkstoffforschung für Wirtschaft und Gesellschaft. 52. Metallkunde Kolloquium, Lech am Arlberg, Austria. http://hdl.handle.net/20.500.12708/65378 ( reposiTUm)

Fritscher, C., Lichtenegger, H. C., Stampfl, J., Hüsing, N., Liska, R., Inführ, R., Koch, T., & Seidler, S. (2006). 3-Dimensional Mesoporous Silica Monoliths and their Structural and Mechanical Properties. In Polymerwerkstoffe 2006 - Abstracts (p. 34). http://hdl.handle.net/20.500.12708/45536 ( reposiTUm)

Stampfl, J., Inführ, R., Seidl, B., Lichtenegger, H. C., Liska, R., Schmidt, V., Kuna, L., & Haase, A. (2006). Two-Photon-3D-lithography of Functional Polymers. In Polymerwerkstoffe 2006 -Abstracts (p. 36). http://hdl.handle.net/20.500.12708/45535 ( reposiTUm)

Fritscher, C., Lichtenegger, H. C., Stampfl, J., Hüsing, N., Liska, R., & Seidler, S. (2006). Nonostructured silica/polymer-monoliths. In ISOSXIV 3#^{rd} European Organosilicon Days - Abstracts (p. P071). http://hdl.handle.net/20.500.12708/45539 ( reposiTUm)

Schuster, M., Turecek, C., Mateos, A., Stampfl, J., Varga, F., & Liska, R. (2006). Evaluation of biocompatible Photopolymers for Rapid Prototyping of Bone Substitutes. In 2#^{nd} Stipomat Workshop - Book of Abstracts (p. P17). http://hdl.handle.net/20.500.12708/45538 ( reposiTUm)

Schuster, M., Turecek, C., Verdianz, T., Stampfl, J., Varga, F., & Liska, R. (2006). Development of Biodegradable Photopolymers. In 2#^{nd} Stipomat Workshop - Book of Abstracts (p. P16). http://hdl.handle.net/20.500.12708/45537 ( reposiTUm)

Schuster, M., Liska, R., Varga, F., & Turecek, C. (2006). Gelatin-based Biophotopolymers. In 2. Wiener Biomaterialsymposium (p. 7). http://hdl.handle.net/20.500.12708/45596 ( reposiTUm)

Schuster, M., Turecek, C., Kaiser, B., Varga, F., Stampfl, J., & Liska, R. (2006). Biophotopolymers for Rapid Prototyping of Cellular Bone Replacement Materials. In Junior Scientist Conference 2006 - Proceedings (pp. 173–174). http://hdl.handle.net/20.500.12708/45469 ( reposiTUm)

Schuster, M., Turecek, C., Varga, F., Lichtenegger, H. C., Stampfl, J., & Liska, R. (2006). Biodegradable photopolymers for bone tissue engeneering. In 8#^{th} Austrian Polymer Meeting - Abstracts. 8#^{th} Austrian Polymer Meeting, Linz, Austria, Austria. http://hdl.handle.net/20.500.12708/45523 ( reposiTUm)

Ganster, B., Ullrich, G., Moszner, N., Salz, U., & Liska, R. (2006). Hydrophilic photoinitiators for acidic aqueous dental formulations. In 8#^{th} Austrian Polymer Meeting - Abstracts. 8#^{th} Austrian Polymer Meeting, Linz, Austria, Austria. http://hdl.handle.net/20.500.12708/45522 ( reposiTUm)

Heller, C., Pucher, N. U., Seidl, B., & Liska, R. (2006). New cross-conjugated photoinitiators. In 8#^{th} Austrian Polymer Meeting - Abstracts (p. 32). http://hdl.handle.net/20.500.12708/45529 ( reposiTUm)

Verdianz, T., Schuster, M., Rumpler, M., Turecek, C., Varga, F., Stampfl, J., & Liska, R. (2005). Biophotopolymers for rapid prototyping of cellular bone replacement materials. In CD European Polymer Congress 2005 (p. 2). http://hdl.handle.net/20.500.12708/45175 ( reposiTUm)

Spoljaric-Lukacic, L., Saf, R., Liska, R., & Knaus, S. (2005). Peroxide-initiated grafting of maleimides onto hydrocarbon substrates. In CD European Polymer Congress 2005 (p. 3). http://hdl.handle.net/20.500.12708/45173 ( reposiTUm)

Verdianz, T., Simbürger, H., Gruber, H., & Liska, R. (2005). Surface modification of polyimides with co-reactive and catalytic groups. In CD European Polymer Congress 2005 (p. 2). http://hdl.handle.net/20.500.12708/45176 ( reposiTUm)

Liska, R., Schuster, M., Inführ, R., Turecek, C., Varga, F., Lichtenegger, H. C., & Stampfl, J. (2005). Photopolymers for Rapid Prototyping of cellular Biomaterials. In 7#^{th} Austrian Polymer Meeting - Final Program (p. 40). http://hdl.handle.net/20.500.12708/45160 ( reposiTUm)

Jauk, S., Ullrich, G., Burtscher, P., Moszner, N., & Liska, R. (2005). New Concepts for Type II Photoinitiators. In 7#^{th} Austrian Polymer Meeting - Final Program (p. 41). http://hdl.handle.net/20.500.12708/45161 ( reposiTUm)

Schuster, M., Turecek, C., Varga, F., Stampfl, J., & Liska, R. (2005). Acrylamide-based Biophotopolymers for Bone Tissue Engineering. In 7#^{th} Austrian Polymer Meeting - Final Program (p. 69). http://hdl.handle.net/20.500.12708/45165 ( reposiTUm)

Liska, R., Kalinyaprak-Icten, K., & Seidl, B. (2005). New insights into the photochemistry of cross-conjugates photoinitiators. In 7#^{th} Austrian Polymer Meeting - Final Program (p. 71). http://hdl.handle.net/20.500.12708/45167 ( reposiTUm)

Kopeinig, S., & Liska, R. (2005). Benzophenone as covalently bound sensitizer for α-cleavable Photoinitiatiators. In 7#^{th} Austrian Polymer Meeting - Final Program (p. 70). http://hdl.handle.net/20.500.12708/45166 ( reposiTUm)

Schuster, M., Turecek, C., Rumpler, M., Varga, F., Liska, R., & Stampfl, J. (2005). Development of Photopolymerizable Biopolymers for Rapid Prototyping of Cellular Bone Replacement Materials. In Euromat 2005 European Congress on Advanced Materials and Processes http.//www.Euromat2005.fems.org (p. 1). http://hdl.handle.net/20.500.12708/45301 ( reposiTUm)

Inführ, R., Liska, R., Lichtenegger, H. C., Fritscher, C., Stampfl, J., & Hüsing, N. (2005). 3D Lithography of Organo-Soluble Mold Materials for Sol-Gel Nanocomposites. In RadTech Europe 2005 Conference Proceedings Volume II (pp. 487–494). Rad Tech Europe Association. http://hdl.handle.net/20.500.12708/45300 ( reposiTUm)

Ullrich, G., Liska, R., Burtscher, P., Salz, U., & Moszner, N. (2005). Investigation of Phenylglycine Derivatives as Coinitiators. In RadTech Europe 2005 Conference Proceedings Volume II (pp. 415–422). Rad Tech Europe Association. http://hdl.handle.net/20.500.12708/45297 ( reposiTUm)

Seidl, B., & Liska, R. (2005). 2-tert-Butylacrylonitrile, a Non-Polymerizable Monomere for the Investigation of Initiation Mechanism. In RadTech Europe 2005 Conference Proceedings Volume II (pp. 391–398). Rad Tech Europe Association. http://hdl.handle.net/20.500.12708/45299 ( reposiTUm)

Seidl, B., Kalinyaprak-Icten, K., Ullrich, G., & Liska, R. (2005). New Cross-Conjugated Photoinitiators. In RadTech Europe 2005 Conference Proceedings Volume II (pp. 399–406). Rad Tech Europe Association. http://hdl.handle.net/20.500.12708/45296 ( reposiTUm)

Seidl, B., Kalinyaprak-Icten, K., & Liska, R. (2005). New Insights into 1,5-Diphenyl 1,4-Diynone as Photoinitiator. In RadTech Europe 2005 Conference Proceedings Volume II (pp. 57–65). Rad Tech Europe Association. http://hdl.handle.net/20.500.12708/45294 ( reposiTUm)

Ullrich, G., Jauk, S., & Liska, R. (2005). How to Avoid the Back Electron Transfer in Type II Photoinitiators. In RadTech Europe 2005 Conference Proceedings Volume II (pp. 407–414). Rad Tech Europe Association. http://hdl.handle.net/20.500.12708/45295 ( reposiTUm)

Kopeinig, S., & Liska, R. (2005). Further Covalently Bonded Photoinitiators. In RadTech Europe 2005 Conference Proceedings Volume II (pp. 373–381). Rad Tech Europe Association. http://hdl.handle.net/20.500.12708/45298 ( reposiTUm)

Inführ, R., Lichtenegger, H. C., Fritscher, C., Stampfl, J., & Liska, R. (2005). 3D Lithography of organo-soluble mold materials. In 7th Austrian Polymer Meeting - Final Program (p. 67). http://hdl.handle.net/20.500.12708/65375 ( reposiTUm)

Inführ, R., Liska, R., Lichtenegger, H. C., Fritscher, C., Stampfl, J., & Hüsing, N. (2005). 3D Lithography of Organo-Soluble Mold Materials for Sol-Gel Nanocomposites. In RadTech Europe 2005 Conference Proceedings Volume II (pp. 487–492). Radtech Europe Association. http://hdl.handle.net/20.500.12708/65278 ( reposiTUm)

Schuster, M., Chen, S. X., Liska, R., Rumpler, M., Turecek, C., Varga, F., & Stampfl, J. (2005). Development of Biodegradable Photopolymers for Bone Tissue Engineering. In RadTech Europe 2005 Conference Proceedings Volume II (pp. 365–372). http://hdl.handle.net/20.500.12708/65308 ( reposiTUm)

Inführ, R., Fritscher, C., Liska, R., Lichtenegger, H. C., Stampfl, J., & Hüsing, N. (2005). Fabrication of Bio-Inspired Ceramic Composites Using Soluble Photopolymers asMmold Materials. In Euromat 2005 European Congress on Advanced Materials and Processes (p. 1). http://hdl.handle.net/20.500.12708/65310 ( reposiTUm)

Fritscher, C., Lichtenegger, H. C., Stampfl, J., Hüsing, N., & Liska, R. (2005). TEMPLATING OF ORGANIC/INORGANIC HYBRID MATERIALS. In E-MRS 2005 Spring Meeting (pp. I-28/54). http://hdl.handle.net/20.500.12708/65312 ( reposiTUm)

Fritscher, C., Lichtenegger, H. C., Stampfl, J., Hüsing, N., Liska, R., & Seidler, S. (2005). NANOSTRUCTURED SILICA/POLYMER-MONOLITHS. In ISOS XIV, 14th International Symposium on Organosilicon Chemistry (p. 158). http://hdl.handle.net/20.500.12708/65311 ( reposiTUm)

Inführ, R., Lichtenegger, H. C., Stampfl, J., Liska, R., Fritscher, C., & Hüsing, N. (2005). 3D Microstereolithography of soluble mold materials. In 31st International Conference on Micro- and Nano-Engineering 2005 - Abstracts (p. 9D_04). http://hdl.handle.net/20.500.12708/65279 ( reposiTUm)

Schuster, M., Chen, S. X., Liska, R., Turecek, C., Varga, F., & Stampfl, J. (2005). Photopolymerizable Biopolymers for Rapid Prototyping of Cellular Bone Replacement Materials. In RadTech Europe 2005 Conference Proceedings Volume II (pp. 479–486). http://hdl.handle.net/20.500.12708/65333 ( reposiTUm)

Fritscher, C., Lichtenegger, H. C., Stampfl, J., Hüsing, N., Liska, R., Inführ, R., & Seidler, S. (2005). Templating of organic/inorganic hybrid materials. In European Materials Research Society Spring Meeting E-MRS 2005 - Scienific Programme (pp. I-28/54). http://hdl.handle.net/20.500.12708/45542 ( reposiTUm)

Fritscher, C., Lichtenegger, H. C., Stampfl, J., Hüsing, N., Liska, R., & Seidler, S. (2004). Fabrication of Bio-inspired Silica Composites. In MRS Fall Meeting 2004 - Program & Exhibit Guide (p. 729). http://hdl.handle.net/20.500.12708/45172 ( reposiTUm)

Fritscher, C., Lichtenegger, H. C., Stampfl, J., Hüsing, N., Liska, R., & Seidler, S. (2004). Fabrication of Bio-inspired Silica Composites. In 2004 MRS Fall Meeting (p. 1). MRS. http://hdl.handle.net/20.500.12708/65188 ( reposiTUm)

Beiträge in Büchern

Tytgat, L., Baudis, S., Ottevaere, H., Liska, R., Thienpont, H., Dubruel, P., & Van Vlierberghe, S. (2018). Photopolymerizable Materials for Cell Encapsulation. In 3D Printing and Biofabrication (pp. 353–396). Springer Nature Switzerland AG. Part of Springer Nature. https://doi.org/10.1007/978-3-319-45444-3_15 ( reposiTUm)

Ligon, S., Kumpfmüller, J., Pucher, N. U., Stampfl, J., & Liska, R. (2016). Fabrication ofWaveguides and Other Optical Elements by Multiphoton Lithography. In Multiphoton Lithography (pp. 267–296). Wiley-VCH. http://hdl.handle.net/20.500.12708/29197 ( reposiTUm)

Husár, B., Hatzenbichler, M., Mironov, V., Liska, R., Stampfl, J., & Ovsianikov, A. (2014). Photopolymerization-based additive manufacturing for the development of 3D porous scaffolds. In Biomaterials for Bone Regeneration (pp. 149–201). Elsevier Science Ltd. https://doi.org/10.1533/9780857098104.2.149 ( reposiTUm)

Stampfl, J., Pettermann, H. E., & Liska, R. (2011). Bioinspired Cellular Structures: Additive Manufacturing and Mechanical Properties. In P. Gruber, D. Bruckner, C. Hellmich, H.-B. Schmiedmayer, H. Stachelberger, & I. C. Gebeshuber (Eds.), Biological and Medical Physics, Biomedical Engineering (pp. 105–123). Springer-Verlag. https://doi.org/10.1007/978-3-642-11934-7_6 ( reposiTUm)

Stampfl, J., & Liska, R. (2011). Polymerizable Hydrogels for Rapid Prototyping: Chemistry, Photolithography, and Mechanical Properties. In P. J. Bartolo (Ed.), Stereolithography (pp. 161–182). Springer-Verlag. http://hdl.handle.net/20.500.12708/27189 ( reposiTUm)

Liska, R., & Schuster, M. (2010). Biocompatible Photopolymers. In J. P. Fouassier & X. Allonas (Eds.), Basics and Applications of Photopolymerization Reactions (pp. 77–91). Research Signpost. http://hdl.handle.net/20.500.12708/27048 ( reposiTUm)

Liska, R., & Stampfl, J. (2010). Photopolymers for rapid prototyping. In J. P. Fouassier & X. Allonas (Eds.), Basics and Applications of Photopolymerization Reactions (pp. 147–173). Research Signpost. http://hdl.handle.net/20.500.12708/27049 ( reposiTUm)

Moszner, N., & Liska, R. (2010). Photoinitiators for direct adhesive restorative materials. In J. P. Fouassier & X. Allonas (Eds.), Basics and Applications of Photopolymerization Reactions (pp. 91–112). Research Signpost. http://hdl.handle.net/20.500.12708/27050 ( reposiTUm)

Liska, R. (2006). New chromophores for photoinitiators. In Photochemistry and UV Curing: New Trends (pp. 55–67). Research Signpost. http://hdl.handle.net/20.500.12708/25296 ( reposiTUm)

Bücher

Stampfl, J., Liska, R., & Ovsianikov, A. (Eds.). (2016). Multiphoton Lithography: Techniques, Materials and Applications. Wiley-VCH. http://hdl.handle.net/20.500.12708/24156 ( reposiTUm)

Präsentationen

Fantoni, A., Krauß, J. E. M., Ammann, T., Liska, R., & Baudis, S. (2025, March 6). Novel aliphatic photoinitiators: Bridging the gap between performance and biocompatibility for tissue engineering applications [Conference Presentation]. Annual Meeting of the Austrian Cluster for Tissue Regeneration 2025, Wien, Austria. ( reposiTUm)

Liepert, K. S., Ret, D., Liska, R., & Knaack, P. (2025, June 25). The Sonorheometer: A New Setup for Rheological Analysis upon Ultrasonication [Poster Presentation]. EPF 2025, Groningen, Netherlands (the). http://hdl.handle.net/20.500.12708/216682 ( reposiTUm)

Krebs, H., Schallar, B., Liska, R., & Limbeck, A. (2025, July 2). Digital ink in examinations (and onboarding) [Conference Presentation]. 11th European Variety in University Chemistry Education Conference, Krakau, Poland. http://hdl.handle.net/20.500.12708/217193 ( reposiTUm)

Schmidt, T., Chalupa-Gantner, F., Markovic, M., Liska, R., Ovsianikov, A., & Baudis, S. (2025, October 29). Development and application of dye-based diazosulfonates as water-soluble two-photon photoinitiators under the aspect of biofabrication [Conference Presentation]. RTE Conference & Exhibition 2025, Warsaw, Poland. ( reposiTUm)

Baltzaki, M. C. I., Helfert, S., Zandrini, T., Rohatschek, A., Rufin, M., Machata, P., Zahoranová, A., Andriotis, O., Thurner, P., Ovsianikov, A., Liska, R., & Baudis, S. (2025, June 23). Micropatterning polymer brushes on confined surfaces using two-photon-initiated RAFT polymerisation [Poster Presentation]. EPF European Polymer Congress 2025, Groningen, Netherlands (the). ( reposiTUm)

Ammann, T., Ehrmann, K., & Liska, R. (2025, November 14). Rheological tools to illuminate photopolymerization of polyesters via ring-opening copolymerization [Poster Presentation]. 2025 4th annual meeting of the Austrian society for rheology (ÖGR), Austria. http://hdl.handle.net/20.500.12708/221512 ( reposiTUm)

Pieringer, F., Catel, Y., Liska, R., Moszner, N., Knaipp, K., Gescheidt, G., & Knaack, P. (2025, June 24). Boron-Boron Bonds: Boldly Breaking Boundaries towards Amine- and Peroxide-Free 2K Radical Polymerization [Conference Presentation]. EPF European Polymer Congress 2025, Groningen, Netherlands (the). ( reposiTUm)

Schneider, B., Ableidinger, K., Ammann, T., Knaack, P., & Liska, R. (2025, October 29). Recent Advances in Photobase Generator Applications [Conference Presentation]. RTE Conference & Exhibition 2025, Warsaw, Poland. http://hdl.handle.net/20.500.12708/224258 ( reposiTUm)

Baudis, S., Helfert, S., Zandrini, T., Rohatschek, A., Rufin, M., Machata, P., Zahoranova, A., Andriotis, O., Thurner, P., Ovsianikov, A., & Liska, R. (2025, March 6). 2PRAFT: Micropatterning of confined surfaces with polymer brushes [Conference Presentation]. Annual Meeting of the Austrian Cluster for Tissue Regeneration 2025, Wien, Austria. http://hdl.handle.net/20.500.12708/221438 ( reposiTUm)

Nikolic, J., Rist, K., Catel, Y., Bassenheim, D., Liska, R., & Knaack, P. (2025, October 29). Novel Monoacylphosphine Oxide [Conference Presentation]. RTE Conference & Exhibition 2025: Connected by Design - Ideas, Innovation, Sustainability, Warsaw, Poland. http://hdl.handle.net/20.500.12708/223129 ( reposiTUm)

Schneider, B., Ableidinger, K., Knaack, P., & Liska, R. (2025, June). From Darkness to Base: The Breakthrough of Photobase Generators [Poster Presentation]. TCH Science Days 2025 – Faculty of Technical Chemistry, Wien, Austria. http://hdl.handle.net/20.500.12708/224257 ( reposiTUm)

Ecker, J., Koch, T., Liska, R., & Stampfl, J. (2025, September 24). Impact of layer adhesion on the (thermo)mechanical properties of 3D printed multi-material parts for easily disassemblable compounds [Conference Presentation]. NextGen Materials 2025: The Convergence of Living Essence and Engineered Innovation, Hamburg, Germany. http://hdl.handle.net/20.500.12708/223296 ( reposiTUm)

Ecker, J., Stampfl, J., & Liska, R. (2025, June 24). Investigating the impact of layer adhesion on the (thermo)mechanical properties of 3D-printed multi-material compounds [Conference Presentation]. EPF European Polymer Congress 2025, Groningen, Netherlands (the). http://hdl.handle.net/20.500.12708/223306 ( reposiTUm)

Liepert, K., Baudis, S., Ret, D., Liska, R., & Knaack, P. (2025, November 14). The Sonorheometer : Real-Time Rheology under Sonication [Poster Presentation]. 4th annual meeting of the Austrian society for rheology (ÖGR), Austria. ( reposiTUm)

Baltzaki, C. I. M., Helfert, S., Zandrini, T., Rohatschek, A., Rufin, M., Machata, P., Zahoranová, A., Andriotis, O. G., Thurner, P. J., Ovsianikov, A., Liska, R., & Baudis, S. (2025, June). Micropatterning Confined Surfaces with Polymer Brushes via Two-Photon-Initiated RAFT Polymerization [Poster Presentation]. TCH Science Days 2025 – Faculty of Technical Chemistry, Wien, Austria. http://hdl.handle.net/20.500.12708/224957 ( reposiTUm)

Gjata, E., Ableidinger, K., Liska, R., & Knaack, P. (2025, June). Photobase generators for the light induced initiation of oxa-Michael addition reactions [Conference Presentation]. EPF European Polymer Congress 2025, Groningen, Netherlands (the). ( reposiTUm)

Gjata, E., Ableidinger, K., Haslinger, C., Liska, R., & Knaack, P. (2025). Shedding light on the photobase mediated oxa-Michael polyaddition [Presentation]. EPF European Polymer Congress, Netherlands (the). ( reposiTUm)

Petkovic, M., Gurmann, T., Sinawehl, L., Ammann, T., Wolff, R., Koch, T., Liska, R., & Baudis, S. (2025, June 17). Gone but not forgotten: Monomers for 3D printing of biodegradable bone scaffolds [Poster Presentation]. TCH Science Days 2025 – Faculty of Technical Chemistry, Wien, Austria. http://hdl.handle.net/20.500.12708/225849 ( reposiTUm)

Petkovic, M., Gurmann, T., Sinawehl, L., Ammann, T., Wolff, R., Koch, T., Liska, R., & Baudis, S. (2025, April 1). Biodegradable bone substitute materials for bone regeneration [Presentation]. 6th FemChem Scientific Workshop 2025, Austria. http://hdl.handle.net/20.500.12708/225847 ( reposiTUm)

Ableidinger, K., & Liska, R. (2024, July 1). From thiol-ene to oxa-ene [Conference Presentation]. IUPAC Macro 2024, United Kingdom of Great Britain and Northern Ireland (the). ( reposiTUm)

Fitzka, M., Scheerer, M., Simon, Z., Marischler, M., Rohr, T., Girolamo, D., Liska, R., & Knaack, P. (2024, June 17). Frontal Polymerization as energy-efficient way towards composites [Conference Presentation]. 8th European Symposium of Photopolymer Science, Stresa, Italy. http://hdl.handle.net/20.500.12708/201948 ( reposiTUm)

Ecker, J., Liska, R., & Stampfl, J. (2024, September 24). Towards Circular Electronics: Design for Disassembly Enabled by Multi-Material 3D Printing [Conference Presentation]. Material Science and Engineering MSE 2024, Darmstadt, Germany. ( reposiTUm)

Ecker, J., Liska, R., & Stampfl, J. (2024, June 18). Design for Disassembly - Using a Multi Material Approach in 3D Printing for Easier Recycling Strategies [Conference Presentation]. 8th European Symposium of Photopolymer Science (ESPS 2024), Stresa, Italy. ( reposiTUm)

Haslinger, C., Liska, R., & Baudis, S. (2024, May). The Future of 3D Printing: Investigation of a Novel Sn-based Photoinitiator with High Stability [Poster Presentation]. Exner Lectures 2024, Wien, Austria. http://hdl.handle.net/20.500.12708/208426 ( reposiTUm)

Kojic, D., Ehrmann, K., Stampfl, J., Baudis, S., & Liska, R. (2024). Exploring novel biodegradable biomaterials: Poly(ether)esters and aliphatic polycarbonates derived from spirocyclic compounds [Presentation]. Annual Meeting of the Austrian Cluster for Tissue Regeneration 2024, Krems an der Donau, Austria. http://hdl.handle.net/20.500.12708/208806 ( reposiTUm)

Mayer, F., Laa, D., Stampfl, J., Ehrmann, K., & Liska, R. (2024, June 19). HIGH PERFORMANCE INTERPENETRATING POLYMER NETWORKS FOR HOT LITHOGRAPHY [Conference Presentation]. 8th European Symposium of Photopolymer Science (ESPS 2024), Stresa, Italy. ( reposiTUm)

Ehrmann, K., Bogdanovic, D., Schandl, S., Wolff, R., Stampfl, J., & Liska, R. (2024). Direct 3D printing of polyester and polycarbonate networks [Conference Presentation]. 8th European Symposium of Photopolymer Science (ESPS 2024), Stresa, Italy. http://hdl.handle.net/20.500.12708/224037 ( reposiTUm)

Fantoni, A., Liska, R., & Baudis, S. (2023, May 3). Photoerosion of Hydrogels: An Innovative Method for Tuning the Local Properties of Semi-Interpenetrating Polymer Networks [Conference Presentation]. Annual Conference of the Austrian Cluster for Tissue Regeneration 2023, Linz, Austria. ( reposiTUm)

Theuer, T., Baumgartner, S., Koch, B., Liska, R., & Stampfl, J. (2023, September 5). Digital Materials: hybrid printing process for large scale production [Conference Presentation]. FEMS EUROMAT 2023, Frankfurt am Main, Germany. ( reposiTUm)

Theuer, T., Baumgartner, S., Koch, B., Liska, R., & Stampfl, J. (2023, May 4). Digital Materials – Photopolymers with increased toughness [Conference Presentation]. 7th European Symposium on Biomaterials and Related Areas BioMAT 2023, Weimar, Germany. ( reposiTUm)

Ruppitsch, L. A., Ehrmann, K., Peer, G., Kury, M., Koch, T., Catel, Y., Stampfl, J., Moszner, N., & Liska, R. (2023, October 17). Cyclopolymerization - a strategy towards low shrinkage behavior for radical photopolymerization [Conference Presentation]. Radtech 2023, München, Germany. ( reposiTUm)

Ahmadi, M., Göschl, M., Liska, R., & Stampfl, J. (2023, September 6). Structure-property relationship in phase-separated (meth)acrylate photopolymers [Conference Presentation]. Materials Science and Technology in Europe : FEMS EUROMAT 2023, Frankfurt am Main, Germany. ( reposiTUm)

Ehrmann, K., Fitzka, M., Ableidinger, K., Berk, O., Baudis, S., & Liska, R. (2023, August). Functional group metamorphosis in the condensed state: A self-reinforcing mechanism to increase mechanical performance of thermoplastic polyurethane materials on demand [Conference Presentation]. ACS Fall 2023, San Francisco, United States of America (the). http://hdl.handle.net/20.500.12708/193677 ( reposiTUm)

Dellago, B., Gurmann, T., Altun, A. A., Liska, R., & Baudis, S. (2023). 3D printed bone grafts: Toughness enhancement utilizing PCL-based additives [Poster Presentation]. Tissue Engineering and Regenerative Medicine International Society European Chapter Conference 2023 (TERMIS- EU 2023, Manchester UK), Manchester, United Kingdom of Great Britain and Northern Ireland (the). https://doi.org/10.34726/5183 ( reposiTUm)

Ecker, J., Liska, R., & Stampfl, J. (2023, September 5). Design for Disassembly – Using Digital Materials in Additive Manufacturing for Easier Recycling Strategies [Conference Presentation]. FEMS Euromat 23, Frankfurt am Main, Germany. ( reposiTUm)

Ehrmann, K., Fitzka, M., Berk, O., Liska, R., & Baudis, S. (2023). Self-Reinforcing Polymers – A New Type Of Biomaterials [Poster Presentation]. Tissue Engineering and Regenerative Medicine International Society European Chapter Conference 2023 (TERMIS- EU 2023, Manchester UK), Manchester, United Kingdom of Great Britain and Northern Ireland (the). https://doi.org/10.34726/5225 ( reposiTUm)

Theuer, T., Baumgartner, S., Koch, B., Liska, R., & Stampfl, J. (2023, September 4). Digital Materials – Bioinspired 3D-printing concept for photopolymers with increased toughness [Poster Presentation]. FEMS EUROMAT 2023, Frankfurt am Main, Germany. ( reposiTUm)

Gurmann, T., Dellago, B., Sinawehl, L., Liska, R., & Baudis, S. (2023, May 2). Polymeric matrices for 3D-printable and biodegradable bone scaffold materials [Conference Presentation]. Austrian Cluster for Tissue Regeneration Annual Conference 2023, Linz, Austria. http://hdl.handle.net/20.500.12708/193952 ( reposiTUm)

Ehrmann, K., Kojic, D., Schandl, S., Wolff, R., Koch, T., Stampfl, J., Gauci, S., Mert, T., Barner-Kowollik, C., & Liska, R. (2023, August). From Free Radical to Radical-Free Lithographic 3D Printing [Conference Presentation]. ACS Fall Meeting 2023, San Francisco, United States of America (the). http://hdl.handle.net/20.500.12708/193402 ( reposiTUm)

Fantoni, A., Schoup, J. C., Koch, T., Baudis, S., & Liska, R. (2022). Sustainable Interpenetrating Polymer Networks for lithography-based 3D-printing [Poster Presentation]. Österreichische Chemietage 2022, TU Wien, Austria. http://hdl.handle.net/20.500.12708/91434 ( reposiTUm)

Dellago, B., Liska, R., & Baudis, S. (2022). End-group modified toughness enhancers for bone replacement materials [Poster Presentation]. EPF European Polymer Congress 2022, Czechia. ( reposiTUm)

Taschner, R., Knaack, P., & Liska, R. (2022, June 27). New Onium Salts as Initiators for Cationic Polymerization, especially Radical Induced Cationic Frontal Polymerization [Conference Presentation]. EPF European Polymer Congress 2022, Prag, Czechia. http://hdl.handle.net/20.500.12708/152737 ( reposiTUm)

Dellago, B., Berk, O., Liska, R., & Baudis, S. (2022). Toughness Enhancers with End-Group Modifications for Photopolymerizable Bone Replacement Materials [Poster Presentation]. Österreichische Chemietage 2022, Wien, Austria. http://hdl.handle.net/20.500.12708/154386 ( reposiTUm)

Steinbauer, P., Sinawehl, L., Liska, R., & Baudis, S. (2022, June 28). One-Step Photopolymerizable Adhesives for Bone Fracture Fixation [Poster Presentation]. EPF European Polymer Congress 2022, Prag, Czechia. http://hdl.handle.net/20.500.12708/152785 ( reposiTUm)

Ahmadi, M., Göschl, M., Liska, R., & Stampfl, J. (2022, September 27). A Study on Photopolymerization Kinetic Effects on the Microstructure of Phase separated (Meth)acrylates [Conference Presentation]. MSE 2022, Darmstadt, Germany. ( reposiTUm)

Pieringer, F., Catel, Y., Liska, R., Moszner, N., & Knaack, P. (2022). Group Transfer Polymerization (GTP) for Use in Dental Applications [Poster Presentation]. EPF European Polymer Conference, Prag, Czechia. ( reposiTUm)

Kojic, D., Steinbauer, P., Baudis, S., & Liska, R. (2022). Ternary thiol-ene systems as one step light curable bone adhesives [Conference Presentation]. EPF European Polymer Congress 2022, Prag, Czechia. ( reposiTUm)

Ehrmann, K., Fitzka, M., Berk, O., Liska, R., & Baudis, S. (2022). In situ reinforcing polymers as high performance biomaterials [Conference Presentation]. EPF European Polymer Congress, Prague, Czechia. http://hdl.handle.net/20.500.12708/152678 ( reposiTUm)

Ecker, J., Ehrmann, K., Stampfl, J., & Liska, R. (2022). Debonding on Demand of Epoxy Resins [Poster Presentation]. EPF European Polymer Congress 2022, Prag, Czechia. ( reposiTUm)

Ricke, A., Dellago, B., Ehrmann, K., Liska, R., & Baudis, S. (2022, June 28). Cyclic acetals as photopolymerizable precursors for degradable biomaterials [Conference Presentation]. EPF European Polymer Congress 2022, Prag, Czechia. http://hdl.handle.net/20.500.12708/152389 ( reposiTUm)

Mete, Y. D., Bomze, D., Klikovits, N., Kojic, D., Schandl, S., Wolff, R., Koch, T., Stampfl, J., & Liska, R. (2022). The bright future of 3D printing: Cationic photopolymerization in Hot Lithography [Conference Presentation]. EPF European Polymer Congress 2022, Prague, Czechia. ( reposiTUm)

Mayer, F., Kury, M., Liska, R., Ehrmann, K., Harakály, G. A., & Gorsche, C. (2022). Salicylic acid based monofunctional reactive diluents with low volatility for radiation curable formulations [Poster Presentation]. EPF European Polymer Congress 2022, Prag, Czechia. ( reposiTUm)

Steinbauer, P., Sinawehl, L., Baudis, S., & Liska, R. (2022). High-Performance Photopolymerizable Adhesives for Bone Repair [Poster Presentation]. 9th TERMIS Winterschool, Radstadt, Austria. ( reposiTUm)

Wottawa, D., Mitterbauer, M., Knaack, P., & Liska, R. (2022). Storage stable formulations for radical induced cationic frontal polymerization [Poster Presentation]. EPF European Polymer Congress 2022, Prag, Czechia. ( reposiTUm)

Knaack, P., Taschner, R., & Liska, R. (2022). Radical Induced Cationic Frontal Polymerization [Conference Presentation]. EPF European Polymer Congress 2022, Prague, Czechia. http://hdl.handle.net/20.500.12708/154294 ( reposiTUm)

Steinbauer, P., Sinawehl, L., Baudis, S., & Liska, R. (2022). High-Performance Adhesives for Fracture Treatment [Poster Presentation]. Österreichische Chemietage 2022, Wien, Austria. ( reposiTUm)

Fitzka, M., Ehrmann, K., Baudis, S., & Liska, R. (2022). Self-reinforcing urethane/urea elastomers as dynamic biomaterials for vascular tissue engineering [Poster Presentation]. EPF European Polymer Congress 2022, Prag, Czechia. ( reposiTUm)

Gorsche, C., Reghunathan, H., Baudis, S., Knaack, P., Husar, B., Läuger, J., Hoffmann, H., & Liska, R. (2022, November 18). Photorheology: A Versatile Tool to Unravel Photopolymerization Processes [Conference Presentation]. Annual Meeting of the Austrian Society for Rheology, Austria. ( reposiTUm)

Schwarzl, P., Ehrmann, K., Liska, R., & Baudis, S. (2022). Improving the Mechanical Properties of Hard-Block Degradable Thermoplastic Polyurethanes for Vascular Tissue Engineering [Poster Presentation]. Österreichische Chemietage 2022, Wien, Austria. ( reposiTUm)

Dellago, B., Ricke, A., Geyer, T., Liska, R., & Baudis, S. (2022). Degradability Enhancers Based on Photopolymerizable Acetal Building Blocks for Artificial Bone Grafts [Poster Presentation]. 9th TERMIS Winterschool, Radstadt, Austria. http://hdl.handle.net/20.500.12708/152601 ( reposiTUm)

Sinawehl, L., Baudis, S., & Liska, R. (2022). Novel bone replacement materials with improved degradation behavior [Conference Presentation]. Austrian Cluster for Tissue Regeneration 2022, Wien, Austria. ( reposiTUm)

Ruppitsch, L. A., Peer, G., Ehrmann, K., Koch, T., & Liska, R. (2022, June 29). Low Shrinkage Networks of Difunctional Cyclopolymerizable Monomers via photo-induced Radical Polymerization [Conference Presentation]. EPF European Polymer Congress 2022, Prag, Czechia. http://hdl.handle.net/20.500.12708/152670 ( reposiTUm)

Ehrmann, K., Tugce N Eren Mert, Mete, Y. D., Bomze, D., Klikovits, N., Kojic, D., Schandl, S., Wolff, R., Koch, T., Stampfl, J., & Liska, R. (2022). Diversifying Processing Parameters and Polymerization Mechanisms for SLA printing [Keynote Presentation]. PPC17 Pacific Polymer Conference, Brisbane, Austria. http://hdl.handle.net/20.500.12708/153666 ( reposiTUm)

Wolff, R., Ehrmann, K., Knaack, P., Seidler, K., Gorsche, C., Koch, T., Stampfl, J., & Liska, R. (2022, June 29). Photo-chemically induced polycondensation of a pure phenolic resin for additive manufacturing [Conference Presentation]. EPF European Polymer Congress 2022, Prag, Czechia. http://hdl.handle.net/20.500.12708/152798 ( reposiTUm)

Haslinger, C., Leutgeb, L. P., Haas, M., Baudis, S., & Liska, R. (2022). Synthesis and Characterization of Novel Photoinitiators based on Tetraacylgermanes [Poster Presentation]. Österreichische Chemietage 2022, Wien, Austria. http://hdl.handle.net/20.500.12708/114876 ( reposiTUm)

Koch, B., Hochwallner, A., Liska, R., & Stampfl, J. (2021). Ink development for the fabrication of digital materials with increased fracture toughness. ESIAM21, Unknown. http://hdl.handle.net/20.500.12708/101644 ( reposiTUm)

Konegger, T., Obmann, R., Mikl, G., Schörpf, S., & Liska, R. (2020). Freeze casting of porous polysilazane-derived ceramics. 44th International Conference and Expo on Advanced Ceramics and Composites (ICACC 2020), Daytona Beach, United States of America (the). http://hdl.handle.net/20.500.12708/101426 ( reposiTUm)

Steinbauer, P., Rohatschek, A., Thurner, P. J., Orestis, A., Liska, R., & Baudis, S. (2019). Adhesion measurement of binding motifs for bone glue applications. 2nd INTERREG - 7th TERMIS Winterschool 2019 “Musculoskeletal Tissue Regeneration: From Mechanobiology to in Vitro/in Vivo Models and Advanced Imaging,” Radstadt, Austria. http://hdl.handle.net/20.500.12708/101088 ( reposiTUm)

Steinbauer, P., Orman, S., Hofstetter, C., Schwentenwein, M., Russmüller, G., Stampfl, J., Liska, R., & Baudis, S. (2019). Tough photopolymers for bone tissue regeneration. ViCEM - Vienna Center for Engineering in Medicine - Biennial Meeting 2019, Wien, Austria. http://hdl.handle.net/20.500.12708/101424 ( reposiTUm)

Steinbauer, P., Reichsöllner, R., Dellago, B., Ehrmann, K., Stampfl, J., Liska, R., & Baudis, S. (2019). Christian Doppler Laboratory for Advanced Polymers for Biomaterials and 3D Printing. 2nd Vienna Polymer-Group Symposium, Tulln, Austria. http://hdl.handle.net/20.500.12708/101133 ( reposiTUm)

Schörpf, S., Catel, Y., Moszner, N., Gorsche, C., & Liska, R. (2019). Reduction of Polymerization-Induced Shrinkage Stress via Combination of Radical Ring Opening and Addition Fragmentation Chain Transfer. RadTech USA 2019, Monterey - CA, United States of America (the). http://hdl.handle.net/20.500.12708/101194 ( reposiTUm)

Steinbauer, P., Orman, S., Hofstetter, C., Schwentenwein, M., Russmüller, G., Stampfl, J., Liska, R., & Baudis, S. (2019). Tough photopolymers as customized biocompatible scaffolds for bone tissue regeneration. New Frontiers in Biofabrication: From Biomolecules to Tissues and Organs, Leuven, Belgium. http://hdl.handle.net/20.500.12708/101171 ( reposiTUm)

Schörpf, S., Taschner, R., Gauss, P., Knaack, P., & Liska, R. (2019). Replacing Aromatic Type II Photoinitiators with α-Ketoesters for Radical Polymerization. RadTech USA 2019, Monterey - CA, United States of America (the). http://hdl.handle.net/20.500.12708/101193 ( reposiTUm)

Ehrmann, K., Grasl, C., Eilenberg, M., Rohringer, S., Bergmeister, H., Podesser, B. K., Schima, H., Liska, R., Baudis, S., & Schwarzl, P. (2019). Development of Thermoplastic Elastomers for Vascular Tissue Regeneration. ViCEM - Vienna Center for Engineering in Medicine - Biennial Meeting 2019, Wien, Austria. http://hdl.handle.net/20.500.12708/101229 ( reposiTUm)

Peer, G., Mitterbauer, M., Knaack, P., Naumov, S., Markovic, M., Ovsianikov, A., Moszner, N., & Liska, R. (2019). Tetraacylstannnane as Highly Reactive Type I Photoinitiators for Long Wavelength Curing Applications. RadTech USA 2019, Monterey - CA, United States of America (the). http://hdl.handle.net/20.500.12708/101195 ( reposiTUm)

Peer, G., Eibel, A., Gorsche, C., Catel, Y., Gescheidt, G., Moszner, N., & Liska, R. (2019). Regulation of Methacrylate Networks via Ester-Activated Vinyl Ethers as ChainTransfer Agents. RadTech USA 2019, Monterey - CA, United States of America (the). http://hdl.handle.net/20.500.12708/101196 ( reposiTUm)

Dellago, B., Geyer, T., Liska, R., & Baudis, S. (2019). Biodegradable photopolymers based on acetal building blocks as artificial bone grafts. ViCEM - Vienna Center for Engineering in Medicine - Biennial Meeting 2019, Wien, Austria. http://hdl.handle.net/20.500.12708/101228 ( reposiTUm)

Ehrmann, K., Grasl, C., Bergmeister, H., Schima, H., Podesser, B. K., Liska, R., & Baudis, S. (2019). From Building Blocks to a Biodegradable & Stable Vascular Graft. 43. Seminar der Österreichischen Gesellschaft für Chirurgische Forschung, Wien, Austria. http://hdl.handle.net/20.500.12708/101224 ( reposiTUm)

Liska, R. (2019). Future Technologies of Polymer Processing: The Chemistry of 3D Printing and Frontal Polymerization. Slovak Academy of Sciences, Polymer Institute SAS, Polymer Institute SAS, Slovakia. http://hdl.handle.net/20.500.12708/101090 ( reposiTUm)

Mikl, G., Obmann, R., Schörpf, S., Liska, R., & Konegger, T. (2019). Pore Morphology Tailoring in Polymer-derived Ceramics generated through Photopolymerization-assisted Solidification Templating. 7. Jahrestagung der Österreichischen Keramischen Gesellschaft (AuCerS) mit Vortragswettbewerb, Leoben, Austria. http://hdl.handle.net/20.500.12708/101098 ( reposiTUm)

Mandt, D., Gruber, P., Markovic, M., Tromayer, M., Rothbauer, M., Kratz, S., Van Hoorick, J., Dubruel, P., van Vlierberghe, S., Ertl, P., Liska, R., & Ovsianikov, A. (2018). Laser-based 3D Printing of Hydrogel Barrier Models for Microfluidic Applications. 1st Vienna Polymer-Group Symposium, Wien, Austria. http://hdl.handle.net/20.500.12708/94939 ( reposiTUm)

Lunzer, M., Ossipov, D., Gruber, P., Hölzl, K., Markovic, M., Liska, R., & Ovsianikov, A. (2018). Biocompatible Micropatterning of o-Nitrobenzyl Crosslinked Hydrogels by Sensitized Two- Photon Cleavage. 1st Vienna Polymer-Group Symposium, Wien, Austria. http://hdl.handle.net/20.500.12708/94941 ( reposiTUm)

Steiger, W., Gruber, P., Dobos, A., Tromayer, M., Lunzer, M., Liska, R., & Ovsianikov, A. (2018). Fully Automated Z-Scan Setup based on an tunable FS-Oscillator. 1st Vienna Polymer-Group Symposium, Wien, Austria. http://hdl.handle.net/20.500.12708/94942 ( reposiTUm)

Zerobin, E., Tromayer, M., Markovic, M., Steiger, W., Gruber, P., Stampfl, J., Ovsianikov, A., Baudis, S., & Liska, R. (2018). Hyaluronic acid as a basis for the development of hydrogel networks and Two-Photon Initiators. 1st Vienna Polymer-Group Symposium, Wien, Austria. http://hdl.handle.net/20.500.12708/94940 ( reposiTUm)

Liska, R. (2018). Photopolymerization: From Biomaterials to 3D Printing. GDCH Vortrag - Uni Stuttgart 2018, Stuttgart, Germany. http://hdl.handle.net/20.500.12708/100684 ( reposiTUm)

Liske, O., Dorfinger, P., Steyrer, B., Gorsche, C., Gmeiner, R., Stampfl, J., Liska, R., Baudis, S., & Knaus, S. (2018). Tailor-made 3D Manufactured Products from Bio-based Renewable Raw Materials. Blickpunkt Forschung: Materialinnovationen @ TU Wien, Wien, Austria. http://hdl.handle.net/20.500.12708/100833 ( reposiTUm)

Steinbauer, P., Dworak, C., Baudis, S., Thurner, P. J., Andriotis, O. G., & Liska, R. (2018). Phosphorus-based RAFT Polymers for Bio-Adhesion. 1st Vienna Polymer-Group Symposium, Wien, Austria. http://hdl.handle.net/20.500.12708/100861 ( reposiTUm)

Ehrmann, K., Dworak, C., Seidler, K., Potzmann, P., Grasl, C., Bergmeister, H., Baudis, S., Podesser, B. K., & Liska, R. (2018). Biodegradable Thermoplastic Polyurethane Polymers for their Application as Electrospun Artificial Blood Vessels. 1st Vienna Polymer-Group Symposium, Wien, Austria. http://hdl.handle.net/20.500.12708/100836 ( reposiTUm)

Liska, R. (2018). Neue Polymere für die licht-basierte Generative Fertigung. Additive Fertigung an der TU Wien-Pilotfabrik Industrie 4.0, Wien, Austria. http://hdl.handle.net/20.500.12708/100825 ( reposiTUm)

Steyrer, B., Liska, R., & Stampfl, J. (2018). Printing Photopolymers by Hot Lithography. Materials Science and Engineering - MSE 2018, Darmstadt, Germany. http://hdl.handle.net/20.500.12708/94915 ( reposiTUm)

Baudis, S., Orman, S., Mautner, A., Schwentenwein, M., Russmüller, G., Stampfl, J., & Liska, R. (2018). Biocompatible, tough photopolymers as 3D printed constructs for bone regeneration. 1st TERMIS-EU WORKSHOP in collaboration with ISBF “3D Printing in Musculoskeletal Tissue Engineering,” Warschau, Poland. http://hdl.handle.net/20.500.12708/100969 ( reposiTUm)

Liska, R. (2018). Thiol-ene photopolymerization. 1rst consortium meeting of our ITN project PHOTO-EMULSION, Mulhouse, France. http://hdl.handle.net/20.500.12708/100826 ( reposiTUm)

Liska, R. (2018). Photopolymerization: From Biomaterials to 3D Printing. 7th Meeting on Chemistry and Life 2018, Brünn, Czechia. http://hdl.handle.net/20.500.12708/100668 ( reposiTUm)

Zerobin, E., Baudis, S., Tomasikova, Z., Qin, X., Markovic, M., Gruber, P., Stampfl, J., Ovsianikov, A., & Liska, R. (2017). Two-Photon Structured Hydrogels based on Hyaluronic Acid for Applications in Tissue Engineering. Österreichische Gesellschaft für Biomedizinische Technik-Jahrestagung 2017, Wien, Austria. http://hdl.handle.net/20.500.12708/100384 ( reposiTUm)

Zerobin, E., Tromayer, M., Markovic, M., Gruber, P., Stampfl, J., Ovsianikov, A., Baudis, S., & Liska, R. (2017). Hyaluronic acid as a basis for the development of hydrogel networks and Two-Photon Initiators. ViCEM - Vienna Center for Engineering in Medicine Inaugural Meeting 2017, Wien, Austria. http://hdl.handle.net/20.500.12708/94720 ( reposiTUm)

Knaack, P., Bomze, D., Klikovits, N., Krossing, I., & Liska, R. (2017). Radical Induced Cationic Frontal Polymerization. 3rd International PaCE Christmas Symposium, University of Vienna, Austria. http://hdl.handle.net/20.500.12708/100522 ( reposiTUm)

Mandt, D., Gruber, P., Markovic, M., Tromayer, M., Rothbauer, M., Kratz, S., Van Hoorick, J., Dubruel, P., Van Vlierberghe, S., Ertl, P., Liska, R., & Ovsianikov, A. (2017). Laser-Based 3d Printing Of Hydrogel Barrier Models For Microfluidic Applications. Biofabrication for Hierarchical in vitro Tissue Models, Herstein, Austria. http://hdl.handle.net/20.500.12708/94649 ( reposiTUm)

Lunzer, M., Ossipov, D., Hölzl, K., Markovic, M., Liska, R., & Ovsianikov, A. (2017). Photo-grafting of VEGF protein gradients into elastin-like polymer hydrogels for improved vascularization. ViCEM - Vienna Center for Engineering in Medicine Inaugural Meeting 2017, Wien, Austria. http://hdl.handle.net/20.500.12708/94656 ( reposiTUm)

Steiger, W., Gruber, P., Dobos, A., Tromayer, M., Lunzer, M., Liska, R., & Ovsianikov, A. (2017). Spectral optimization of multiphoton polymerisation for tissue engineering. ViCEM - Vienna Center for Engineering in Medicine Inaugural Meeting 2017, Wien, Austria. http://hdl.handle.net/20.500.12708/94654 ( reposiTUm)

Mandt, D., Gruber, P., Markovic, M., Tromayer, M., Rothbauer, M., Kratz, S., Van Hoorick, J., Dubruel, P., van Vlierberghe, S., Ertl, P., Liska, R., & Ovsianikov, A. (2017). Laser Based 3D Printing of Hydrogel Barrier Models for Microfluidic Applications. ViCEM - Vienna Center for Engineering in Medicine Inaugural Meeting 2017, Wien, Austria. http://hdl.handle.net/20.500.12708/94655 ( reposiTUm)

Helfert, S., Dworak, C., Sevcsik, E., Peterlik, H., Sauer, M., Ret, D., & Liska, R. (2017). Synthesis and Characterization of Polymer Linker Systems for T-cell Investigations. Workshop Additive manufacturing as a tool to create life in 3D, Brno, Czechia. http://hdl.handle.net/20.500.12708/100341 ( reposiTUm)

Lunzer, M., Ossipov, D., Gruber, P., Hölzl, K., Markovic, M., Liska, R., & Ovsianikov, A. (2017). Biocompatible Micropatterning of o-Nitrobenzyl Crosslinked Hydrogels by Sensitised Two-Photon Cleavage. Workshop Additive manufacturing as a tool to create life in 3D, Brno, Czechia. http://hdl.handle.net/20.500.12708/100344 ( reposiTUm)

Kollmer, J., Grunenberg, D., Gorsche, C., Liska, R., & Stampfl, J. (2017). Lithographiebasierte GF für die Prozessierung hochviskoser Photopolymere. Internationale Messe & Konferenz für additive Technologien, Erfurt, Germany. http://hdl.handle.net/20.500.12708/100335 ( reposiTUm)

Harakaly, G., Kury, M., Gorsche, C., Seidler, K., Reghunathan, H., Dorfinger, P., Koch, T., Stampfl, J., Moszner, N., & Liska, R. (2017). Addition fragmentation chain transfer agents for formation of tough photopolymer network in 3D printing applications. Workshop Additive manufacturing as a tool to create life in 3D, Brno, Czechia. http://hdl.handle.net/20.500.12708/100346 ( reposiTUm)

Zerobin, E., Baudis, S., Tomasikova, Z., Qin, X., Markovic, M., Gruber, P., Stampfl, J., Ovsianikov, A., & Liska, R. (2017). High Resolved Biocompatible Hydrogel Constructs Based on Hyaluronic Acid. Workshop Additive manufacturing as a tool to create life in 3D, Brno, Czechia. http://hdl.handle.net/20.500.12708/100345 ( reposiTUm)

Liska, R. (2017). Smart Photopolymers: from 3D printing to biomaterials. Seminar Series 2017, CEITEC Brünn, Czechia. http://hdl.handle.net/20.500.12708/100347 ( reposiTUm)

Steiger, W., Gruber, P., Dobos, A., Tromayer, M., Lunzer, M., Liska, R., & Ovsianikov, A. (2017). Fully Automated Z-scan Setup Based on a Tunable FS-Oscillator. AMBA 2017, Ghent, Belgium. http://hdl.handle.net/20.500.12708/94662 ( reposiTUm)

Liska, R. (2016). Advanced Applications of Photopolymerization in the Field of Biomaterials and 3D Printing. GÖCH Öberösterreich (eingeladen), Johannes Kepler Universität Linz, Austria. http://hdl.handle.net/20.500.12708/99959 ( reposiTUm)

Kollmer, J., Dorfinger, P., Gorsche, C., Liska, R., & Stampfl, J. (2016). Toughening and coloring of photopolymers for lithography-based 3D-printing. 6th International Conference on Additive Technologies iCAT 2016, Nürnberg, Germany. http://hdl.handle.net/20.500.12708/94464 ( reposiTUm)

Steyrer, B., Gorsche, C., Dorfinger, P., Liska, R., & Stampfl, J. (2016). Toughening of Photopolymers for Lithography-based Additive Manufacturing. MSE 2016, Darmstadt, Germany. http://hdl.handle.net/20.500.12708/94408 ( reposiTUm)

Dorfinger, P., Liska, R., & Stampfl, J. (2015). Toughening of Photopolymers for Stereolithography (SL). Polymer Processing Society Conference 2015, Graz, Austria. http://hdl.handle.net/20.500.12708/94191 ( reposiTUm)

Gmeiner, R., Steyrer, B., Samusjew, A., Mautner, A., Liska, R., & Stampfl, J. (2015). Stereolithographic Manufacturing of Biodegradable Photopolymers. Polymer Processing Society Conference 2015, Graz, Austria. http://hdl.handle.net/20.500.12708/94231 ( reposiTUm)

Baudis, S., & Liska, R. (2015). Advanced Photopolymers for High Resolution Addtive Manufacturing. ADD+IT 2015, Linz, Austria. http://hdl.handle.net/20.500.12708/99837 ( reposiTUm)

Liska, R. (2015). Advanced Photopolymers for Tissue Engineering. SummerSchool 2015, Bad Herrenalb, Germany. http://hdl.handle.net/20.500.12708/99763 ( reposiTUm)

Liska, R. (2015). Biocompatible Photopolymers for 3D printing. GDCh Vortrag Hochschule Niederrhein, Niederrhein, Germany. http://hdl.handle.net/20.500.12708/99765 ( reposiTUm)

Gorsche, C., Griesser, M., Koch, T., Moszner, N., & Liska, R. (2015). The potential of β-allyl sulfone-based dimethacrylate networks. ESF Research Networking Programme on Precision Polymer Materials (P2M), Lacanau, Lacanau, France. http://hdl.handle.net/20.500.12708/99632 ( reposiTUm)

Baudis, S., Tomasikova, Z., Qin, X., Gruber, P., Markovic, M., Stampfl, J., Ovsianikov, A., & Liska, R. (2015). Cell Encapsulation by Microfabrication with Hyaluronic Acid based Hydrogel Precursors. International Conference on Biofabrication 2015, Utrecht, Netherlands (the). http://hdl.handle.net/20.500.12708/94272 ( reposiTUm)

Benedikt, S., Dietliker, K., Grützmacher, H., Markovic, M., Moszner, N., Ovsianikov, A., & Liska, R. (2015). Characterization and Comparison of Next Generation Water-Soluble Photoinitiators. International Conference on Biofabrication 2015, Utrecht, Netherlands (the). http://hdl.handle.net/20.500.12708/94271 ( reposiTUm)

Liska, R. (2015). 3D Printing of a New Generation of Biocompatible and Biodegradable Photopolymers. Makromolekulares Kolloquium, Freiburg, Germany. http://hdl.handle.net/20.500.12708/99764 ( reposiTUm)

Liska, R. (2014). Photopolymers in digital and restorative dentistry. Christian Doppler Forum, Bad Blumau, Austria. http://hdl.handle.net/20.500.12708/99521 ( reposiTUm)

Liska, R. (2014). Biokompatible Polymere für den 3D‐Druck. 8. Forschungs‐ & Technologieforum Mostviertel, Amstetten, Austria. http://hdl.handle.net/20.500.12708/99523 ( reposiTUm)

Liska, R. (2014). Fundamentals of Frontal (Photo)polymerization. PolyComp Annual Meeting 2014, Leoben, Austria. http://hdl.handle.net/20.500.12708/99524 ( reposiTUm)

Gruber, P., Markovic, M., Hölzl, K., Tromayer, M., van Vlierberghe, S., Dubruel, P., Liska, R., Stampfl, J., & Ovsianikov, A. (2014). Laser Photofabrication of Cell-Containing Hydrogel Constructs. 3rd European Symposium of Photopolymer Science 2014, Vienna, Austria. http://hdl.handle.net/20.500.12708/94864 ( reposiTUm)

Liska, R. (2014). Photopolymerization: A long known technique in a modern environment - 3D printing of biomaterials. Steinhofer-Vorlesung, Freiburg, Germany. http://hdl.handle.net/20.500.12708/99374 ( reposiTUm)

Liska, R. (2014). Biofunctional Photopolymers. 1. Meeting des erweiterten Clusters für Geweberegeneration 2014, Wien, Austria. http://hdl.handle.net/20.500.12708/99375 ( reposiTUm)

Liska, R. (2014). Biocompatible polymers in tissue engineering. Seminar-SoftMatterScience, Freiburg, Germany. http://hdl.handle.net/20.500.12708/99373 ( reposiTUm)

Bomze, D., Schwarz, V., Husar, B., Qin, X., Gruber, P., Ovsianikov, A., Stampfl, J., & Liska, R. (2014). Novel low-toxic PVA based hydrogel precursors for tissue engineering based on thiol-ene crosslinking. P2M Winter School, Zakopane, Poland. http://hdl.handle.net/20.500.12708/99366 ( reposiTUm)

Ligon, S., Tromayer, M., Li, Z., Torgersen, J., Ajami, A., Rosspeintner, A., Naumov, S., Scherzer, T., Stampfl, J., & Liska, R. (2014). New Developments in Initiators for Two-Photon Polymerization. RadTech USA 2014, Chicago, United States of America (the). http://hdl.handle.net/20.500.12708/99372 ( reposiTUm)

Ligon, S., Qin, X., Esfandiari, P., Tomasikova, Z., Gruber, P., Ovsianikov, A., & Liska, R. (2014). Advanced Applications of Thiol-Ene Formulations. RadTech USA 2014, Chicago, United States of America (the). http://hdl.handle.net/20.500.12708/99371 ( reposiTUm)

Sehnal, P., Harper, K., Rose, A. T., Anderson, D. G., Green, A. W., Husar, B., Griesser, M., & Liska, R. (2014). Novel Phosphine Oxide Photoinitiators. RadTech USA 2014, Chicago, United States of America (the). http://hdl.handle.net/20.500.12708/99376 ( reposiTUm)

Gorsche, C., Griesser, M., Hametner, C., Ganster, B., Moszner, N., Neshchadin, D., Rosspeintner, A., Gescheidt, G., Saf, R., & Liska, R. (2014). New generation of highly efficient long-wavelength photoinitiators for dental restoratives: From research to application. RadTech USA 2014, Chicago, United States of America (the). http://hdl.handle.net/20.500.12708/99368 ( reposiTUm)

Husar, B., Mautner, A., Varga, F., Stampfl, J., & Liska, R. (2014). An overview on low cytotoxic alternatives to (meth)acrylates: vinyl esters and vinyl carbonates. RadTech USA 2014, Chicago, United States of America (the). http://hdl.handle.net/20.500.12708/99370 ( reposiTUm)

Husar, B., Ligon, S., Wutzel, H., Hoffmann, H., & Liska, R. (2014). Experimental Comparison of Various Anti-Oxygen Inhibition Strategies in LED Curing. RadTech USA 2014, Chicago, United States of America (the). http://hdl.handle.net/20.500.12708/99369 ( reposiTUm)

Liska, R. (2013). Photopolymerization: A long known technique in a modern environment - 3D printing of biomaterials. 27. Internationales H.F. Mark-Symposium 2013, Wien, Austria. http://hdl.handle.net/20.500.12708/99131 ( reposiTUm)

Liska, R. (2013). Rapid Prototyping von biokompatiblen und bioabbaubaren Kunststoffen für die Geweberegeneration. VSVA-Symposium, Wien, Austria. http://hdl.handle.net/20.500.12708/99130 ( reposiTUm)

Ligon, S., Griesser, M., Neshchadin, D., Rosspeintner, A., Gorelik, V., Ganster, B., Saf, R., Gescheidt, G., Moszner, N., & Liska, R. (2013). Advances in long wavelength initiators for photocurable dental adhesives and restoratives. RadTech Asia 2013, Shanghai, China. http://hdl.handle.net/20.500.12708/99067 ( reposiTUm)

Qin, X., Husar, B., Torgersen, J., Mühleder, S., Redl, H., Holnthoner, W., Stampfl, J., Ovsianikov, A., & Liska, R. (2013). Two-photon polymerization for biodegradable 3D hydrogels scaffolds. RadTech Asia 2013, Shanghai, China. http://hdl.handle.net/20.500.12708/99066 ( reposiTUm)

Liska, R. (2013). Two Photon induced Polymerization: An excellent tool for precise sub- micrometer fabrication of biocompatible photopolymers. Summer school P2M, Ghent, Belgium. http://hdl.handle.net/20.500.12708/99115 ( reposiTUm)

Liska, R. (2013). Photopolymerization and 3D printing. Slovak Academy of Sciences, Bratislava, Slovakia. http://hdl.handle.net/20.500.12708/99071 ( reposiTUm)

Gmeiner, R., Fantino, E., Steyrer, B., Samusjew, A., Husar, B., Liska, R., & Stampfl, J. (2013). Additive Manufacturing of Filled and Unfilled Bio-Photopolymers. In BioNanoMaterials. Jahrestagung der Deutschen Gesellschaft für Biomaterialien 2013, Erlangen, Germany. Bionanomaterials/de Gruyter. http://hdl.handle.net/20.500.12708/66884 ( reposiTUm)

Ligon, S., Husar, B., Baudis, S., Nehl, F., Nigisch, A., Bergmeister, H., Bernhard, D., Stampfl, J., & Liska, R. (2012). Improved elastomeric materials for CAD/CAM generation of vascular structures in soft tissue replacement therapies. The 3#^{rd} TERMIS World Congress 2012, Vienna, Austria. http://hdl.handle.net/20.500.12708/98919 ( reposiTUm)

Husar, B., Mautner, A., Heller, C., Schwentenwein, M., Varga, F., Koch, T., Macfelda, K., Russmüller, G., Stampfl, J., & Liska, R. (2012). Utilization of photopolymerization of new low toxic vinyl monomers in bone tissue engineering. The 3#^{rd} TERMIS World Congress 2012, Vienna, Austria. http://hdl.handle.net/20.500.12708/98926 ( reposiTUm)

Ovsianikov, A., Torgersen, J., Qin, X., Li, Z., Mühleder, S., Holnthoner, W., Redl, H., Liska, R., & Stampfl, J. (2012). Laser fabrication of cell-containing hydrogel constructs. International Conference on Biofabrication 2012, Manchester, United Kingdom of Great Britain and Northern Ireland (the). http://hdl.handle.net/20.500.12708/93495 ( reposiTUm)

Liska, R. (2012). Photopolymerization and 3D lithography. ESF Research Networking Programme on Precision Polymer Materials (P2M), San Feliu de Guixols, Spain. http://hdl.handle.net/20.500.12708/98929 ( reposiTUm)

Liska, R. (2012). Frontal Polymerization and other new concepts in Radical Polymerization. BASF, Ludwigshafen, Germany. http://hdl.handle.net/20.500.12708/98892 ( reposiTUm)

Liska, R. (2012). Advanced Monomers and Initiators for radical Photopolymerization. Institut für Oberflächenmodifizierung, Leipzig, Germany. http://hdl.handle.net/20.500.12708/98938 ( reposiTUm)

Liska, R. (2012). Biocompatible Photopolymers: From Synthesis to in Vivo Studies. University of Maribor, Maribor, Slovenia. http://hdl.handle.net/20.500.12708/98940 ( reposiTUm)

Liska, R. (2012). Frontal Polymerization and other new concepts in Radical Polymerization. Cytec, Brüssel, Belgium. http://hdl.handle.net/20.500.12708/98937 ( reposiTUm)

Gugg, A., Gorsche, C., Moszner, N., & Liska, R. (2012). Addition fragmentation chain transfer agents for controlled radical photopolymerization. ESF Research Networking Programme on Precision Polymer Materials (P2M), San Feliu de Guixols, Spain. http://hdl.handle.net/20.500.12708/99584 ( reposiTUm)

Husar, B., Mautner, A., Heller, C., Schwentenwein, M., Varga, F., Koch, T., Macfelda, K., Russmüller, G., Stampfl, J., & Liska, R. (2012). Vinyl esters and vinyl carbonates: low cytotoxic alternatives to (meth)acrylates. ESF Research Networking Programme on Precision Polymer Materials (P2M), San Feliu de Guixols, Spain. http://hdl.handle.net/20.500.12708/99116 ( reposiTUm)

Ligon, S., Husar, B., Baudis, S., Seidler, K., Weigel, G., Grasl, C., Bergmeister, H., & Liska, R. (2012). Electrospun thermoplastic polyurethane vascular grafts with controllable degradation. ESF Research Networking Programme on Precision Polymer Materials (P2M), San Feliu de Guixols, Spain. http://hdl.handle.net/20.500.12708/99117 ( reposiTUm)

Torgersen, J., Ovsianikov, A., Mironov, V., Pucher, N. U., Qin, X., Li, Z., Cicha, K., Machacek, T., Jantsch-Plunger, V., Liska, R., & Stampfl, J. (2012). High Speed 3D laser micro-fabrication of biocompatible hydrogel scaffolds. CAIM III Tercier Congreso Argentino die Engereía Mécanica, Buenos Aires, Argentina. http://hdl.handle.net/20.500.12708/93392 ( reposiTUm)

Stampfl, J., Torgersen, J., Ovsianikov, A., Qin, X., Zhiquan, L., Mironov, V., & Liska, R. (2012). Photo-sensitive Biocompatible Hydrogels Structuring Extracellular Environments by Two Photon Polymerisation. 2012 MRS Spring Meeting & Exhibit, San Francisco, United States of America (the). http://hdl.handle.net/20.500.12708/93440 ( reposiTUm)

Schreiber, C., Baudis, S., Grasl, C., Stoiber, M., Walter, I., Plasenzotti, R., Bernhard, D., & Liska, R. (2011). In-vivo evaluation of new synthetic degradable and non-degradable small diameter vascular grafts. Vfwf-Universitätsvorlesung, Vienna, Austria. http://hdl.handle.net/20.500.12708/98955 ( reposiTUm)

Liska, R. (2011). Photopolymers and Rapid Prototyping. Beijing University of Technology, Beijing, CN, Non-EU. http://hdl.handle.net/20.500.12708/98687 ( reposiTUm)

Liska, R. (2011). New Monomers and Photoinitiators. Beijing University of Technology, Beijing, CN, Non-EU. http://hdl.handle.net/20.500.12708/98688 ( reposiTUm)

Liska, R. (2011). Photopolymers for biomedical applications. Beijing University of Technology, Beijing, CN, Non-EU. http://hdl.handle.net/20.500.12708/98686 ( reposiTUm)

Liska, R. (2011). Fundamentals in Photopolymerization. Firma Objet, Rehovot, IL, Non-EU. http://hdl.handle.net/20.500.12708/98684 ( reposiTUm)

Liska, R. (2011). Photopolymerization goes 3D. FoE Advanced Material Science, Graz, Austria. http://hdl.handle.net/20.500.12708/98583 ( reposiTUm)

Cicha, K., Li, Z., Stadlmann, K., Torgersen, J., Markut-Kohl, R., Liska, R., & Stampfl, J. (2011). Fabrication and evaluation of 3D-micro-structures produced using two-photon-induced photopolymerization (TPIP or 2PP) by means of optical assessment and FTIR-spectroscopy. 16. Tagung Festkörperanalytik, Wien, Austria. http://hdl.handle.net/20.500.12708/93141 ( reposiTUm)

Liska, R. (2011). New Concepts in Radical Photopolymerization. BASF, Ludwigshafen, Germany. http://hdl.handle.net/20.500.12708/98683 ( reposiTUm)

Seidler, K., Baudis, S., Ligon, S., Grasl, C., Arras, M., Schima, H., Bergmeister, H., Winter, B., Koch, T., Stampfl, J., & Liska, R. (2011). Biocompatible and biodegradable thermoplastic urethane Elastomers for electrospinning of vascular grafts. 1#^{st} P2M Networking Conference, Obernai, France. http://hdl.handle.net/20.500.12708/98696 ( reposiTUm)

Mautner, A., Qin, X., Macfelda, K., Russmüller, G., Stampfl, J., & Liska, R. (2011). Vinyl carbonates, a new generation of low toxic monomers. 1#^{st} P2M Networking Conference, Obernai, France. http://hdl.handle.net/20.500.12708/98698 ( reposiTUm)

Liska, R. (2011). Advanced Biomaterials for 3D-Photopolymerization. 1#^{st} P2M Networking Conference, Obernai, France. http://hdl.handle.net/20.500.12708/98697 ( reposiTUm)

Liska, R. (2010). Photopolymerisation of Biocompatible Materials. Firma Beiersdorf, Hamburg, D, EU. http://hdl.handle.net/20.500.12708/98296 ( reposiTUm)

Liska, R. (2010). Biocompatible Photopolymers. Firma Objet, Rehovot, IL, Non-EU. http://hdl.handle.net/20.500.12708/98298 ( reposiTUm)

Liska, R. (2010). New Monomers and Initiators for Photopolymerisation. Firma Durst, Lienz in Osttirol, A, Austria. http://hdl.handle.net/20.500.12708/98297 ( reposiTUm)

Liska, R. (2010). Further Projects in the field of Photopolymerization. Firma Objet, Rehovot, IL, Non-EU. http://hdl.handle.net/20.500.12708/98299 ( reposiTUm)

Ajami, A., Husinsky, W., Pucher, N., & Liska, R. (2010). Two-photon absorption cross section measurement of a series of two-photon induced photo-initiators using Z-scan technique for ultrashort laser radiation. Junior Scientist Conference 2010, Wien, Austria. http://hdl.handle.net/20.500.12708/127992 ( reposiTUm)

Schwentenwein, M., Heller, C., Qin, X., Varga, F., Stampfl, J., & Liska, R. (2010). Additive Manufacturing Technologies for 3D Fabrication of Biocompatible and Biodegradable Photopolymers. Materials Science and Engineering, Nürnberg, Germany. http://hdl.handle.net/20.500.12708/98447 ( reposiTUm)

Kumpfmüller, J., Inführ, R., Stadlmann, K., Cicha, K., Satzinger, V., Stampfl, J., & Liska, R. (2010). Flexible Optical WaveGuides via Two-Photon Polymerization. Materials Science and Engineering, Nürnberg, Germany. http://hdl.handle.net/20.500.12708/98446 ( reposiTUm)

Qin, X., Heller, C., Schwentenwein, M., Varga, F., Russmüller, G., Stampfl, J., & Liska, R. (2010). New Bio-photopolymers with good biocompatibility for Tissue Engineering. Materials Science and Engineering, Nürnberg, Germany. http://hdl.handle.net/20.500.12708/98449 ( reposiTUm)

Li, Z., Siklos, M. I., Pucher, N. U., Cicha, K., Ajami, A., Husinsky, W., Stampfl, J., & Liska, R. (2010). Synthesis and Structure-Activity Relationship of Several Novel Two-Photon Initiators based on a D-pi-A-pi-D Chromophore. Materials Science and Engineering, Nürnberg, Germany. http://hdl.handle.net/20.500.12708/98448 ( reposiTUm)

Gugg, A., Ganster, B., Moszner, N., & Liska, R. (2009). Dental Composite Materials Based on Visible Light Photopolymerization. MRS Fall Meeting 2009, Boston, MA, USA, Non-EU. http://hdl.handle.net/20.500.12708/98216 ( reposiTUm)

Heller, C., Dworak, C., Liska, R., & Varga, F. (2009). Biocompatible Phorphorus-based Monomers for Radical Polymerization. MRS Fall Meeting 2009, Boston, MA, USA, Non-EU. http://hdl.handle.net/20.500.12708/98218 ( reposiTUm)

Liska, R. (2009). Robert Liska, Photoinitiators and Monomers for Medical Applications. Photopolymerization Fundamentals 2009, Breckenridge, CO, USA, Non-EU. http://hdl.handle.net/20.500.12708/98219 ( reposiTUm)

Baudis, S., Pulka, T., Steyrer, B., Wilhelm, H., Weigel, G., Bergmeister, H., Stampfl, J., & Liska, R. (2009). 3D-printing of Urethane-based Photoelastomers for Vascular Tissue Regeneration. MRS Fall Meeting 2009, Boston, MA, USA, Non-EU. http://hdl.handle.net/20.500.12708/98214 ( reposiTUm)

Heller, C., Schwentenwein, M., Stampfl, J., Varga, F., Liska, R., Porodec, M., Schulz-Siegmund, M., & Russmüller, G. (2009). Additive Manufacturing Technologies for the 3D Fabrication of Biocompatible and Biodegradable Photopolymers. MRS Fall Meeting 2009, Boston, MA, USA, Non-EU. http://hdl.handle.net/20.500.12708/98215 ( reposiTUm)

Liska, R. (2009). Recent Advances in Photopolymerisation. Firma Huntsman, Basel, CH, Non-EU. http://hdl.handle.net/20.500.12708/98295 ( reposiTUm)

Bashir, S., Ajami, A., Rafique, M. S., Husinsky, W., Pucher, N., Liska, R., Inführ, R., Lichtenegger, H., & Stampfl, J. (2008). Z-scan measurement of two-photon absorption for ultra short laser radiation. 15 Intern. School on Quantum Electronics “Laser Physics and Applications”, Burgas/Bulgarien, EU. http://hdl.handle.net/20.500.12708/127119 ( reposiTUm)

Porodec, M., Heller, C., Liska, R., Stampfl, J., Hacker, M., & Schulz-Siegmund, M. (2008). Covalent Modification of Photo-cross-linkable Polymers for Bone Tissue Engineering Using a Model Protein. International Workshop on Biomacromolecules 2008 - Renewable, Degradable and Biomedical Polymers, Stockholm/ Schweden, EU. http://hdl.handle.net/20.500.12708/92569 ( reposiTUm)

Gäbler, S., Koch, T., Stampfl, J., Seidler, S., Heller, C., Baudis, S., Liska, R., & Weidisch, R. (2008). Determination of the Viscoelastic Properties of Hydrogels based on Polyethylene Glycol Diacrylate (PEG-DA). Materials Science and Engineering - MSE 2008, Nürnberg, EU. http://hdl.handle.net/20.500.12708/92552 ( reposiTUm)

Inführ, R., Pucher, N. U., Lichtenegger, H. C., Liska, R., Schmidt, V., Satzinger, V., & Stampfl, J. (2008). Refractive Index Patterning of Flexible Waveguide Materials by Two-Photon Polymerization. Materials Science and Engineering - MSE 2008, Nürnberg, EU. http://hdl.handle.net/20.500.12708/92584 ( reposiTUm)

Liska, R. (2007). Photopolymere - Neue Dentalmaterialien und bioresorbierbarer Knochenersatz. Informationsveranstaltung: Innovationen für die Medizintechnik, Tu-Wien, A, Austria. http://hdl.handle.net/20.500.12708/97844 ( reposiTUm)

Pucher, N. U., Heller, C., Seidl, B., Inführ, R., Kuna, L., Haase, A., Schmidt, V., Lichtenegger, H. C., Stampfl, J., & Liska, R. (2007). New alkyne-based initiators for single- ad two-photon-induced photopolymerization. 2007 MRS Spring Meeting, San Francisco, Non-EU. http://hdl.handle.net/20.500.12708/92346 ( reposiTUm)

Liska, R. (2007). Photopolymerisation mittels Ein- und Zwei Photonen. Projektmeeting Fa. ISOTEC, Reinischkogel, Steiermark, Austria. http://hdl.handle.net/20.500.12708/97606 ( reposiTUm)

Schuster, M., Turecek, C., Varga, F., Stampfl, J., & Liska, R. (2007). 3D-shaping of biodegradable photopolymers for hard tissue replacement. EMRS Spring Meeting 2007, Strasbourg, France, EU. http://hdl.handle.net/20.500.12708/97621 ( reposiTUm)

Inführ, R., Pucher, N. U., Heller, C., Lichtenegger, H. C., Liska, R., Schmidt, V., Kuna, L., Haase, A., & Stampfl, J. (2007). Functional Polymers Structured by Two Photon Lithography. EMRS Spring Meeting 2007, Strasbourg, France, EU. http://hdl.handle.net/20.500.12708/97622 ( reposiTUm)

Liska, R., Schuster, M., Inführ, R., Turecek, C., Pucher, N. U., Heller, C., Seidl, B., Fritscher, C., Kuna, L., Haase, A., Schmidt, V., Lichtenegger, H. C., Varga, F., & Stampfl, J. (2007). Single- and Two-Photon Initiated Polymerization in Rapid Prototyping. 2007 MRS Spring Meeting, San Francisco, Non-EU. http://hdl.handle.net/20.500.12708/92481 ( reposiTUm)

Inführ, R., Stampfl, J., Pucher, N., Lichtenegger, H. C., Liska, R., Schmidt, V., Kuna, L., & Haase, A. (2007). Functional Polymers Structured by Two Photon Lithography. E-MRS European Materials Research Society - Spring Meeting 2007, Strasbourg/ France, EU. http://hdl.handle.net/20.500.12708/92450 ( reposiTUm)

Schuster, M., Turecek, C., Varga, F., Lichtenegger, H. C., Stampfl, J., & Liska, R. (2007). Development of bone replacement materials using stereolithography. MRS Spring Meeting, San Francisco, United States of America (the). http://hdl.handle.net/20.500.12708/92347 ( reposiTUm)

Turecek, C., Schuster, M., Varga, F., Liska, R., Kaiser, B., Stampfl, J., & Klaushofer, K. (2006). Evaluation and influence of photopolymers, capable for rapid prototyping, on the adhesion, proliferation and differentiation of osteoblasts. 33rd European Symposium on Calcified Tissues, Prag, EU. http://hdl.handle.net/20.500.12708/92168 ( reposiTUm)

Inführ, R., Fritscher, C., Schmidt, V., Kuna, L., Liska, R., Lichtenegger, H. C., & Stampfl, J. (2006). Structuring Methods Capable of Building 3D Parts with Feature Resolutions from 50 µm to 100 nm. Junior Euromat 2006, Lausanne, CH, Non-EU. http://hdl.handle.net/20.500.12708/92274 ( reposiTUm)

Schuster, M., Turecek, C., Kaiser, B., Varga, F., Stampfl, J., & Liska, R. (2006). Biophotopolymers for Rapid Prototyping of Cellular Bone Replacement Materials. Junior Scientist Conference, Wien, Austria. http://hdl.handle.net/20.500.12708/97280 ( reposiTUm)

Liska, R., & Pucher, N. U. (2006). Materials for Two Photon Absorption Photopolymerization. Projektmeeting Fa. ISOTEC, Reinischkogel, Steiermark, Austria. http://hdl.handle.net/20.500.12708/97281 ( reposiTUm)

Liska, R. (2006). Recent developments in photoinitiators and photopolymerization. Universität Mulhouse, F-68093 Mulhouse, EU. http://hdl.handle.net/20.500.12708/97250 ( reposiTUm)

Liska, R. (2006). Konzepte und Modifikationen in Typ I und Typ II Photoinitiatoren. CIBA, Basel, Non-EU. http://hdl.handle.net/20.500.12708/97249 ( reposiTUm)

Liska, R. (2006). Photoinitiatoren mit funktionellen Gruppen. EMS Chemie, CH-7013 Domat/Ems, Non-EU. http://hdl.handle.net/20.500.12708/97248 ( reposiTUm)

Inführ, R., Fritscher, C., Schmidt, V., Kuna, L., Liska, R., Lichtenegger, H. C., & Stampfl, J. (2006). Structuring Methods Capable of Building 3D Parts with Feature Resolutions from 50 µm to 100 nm. Junior Euromat, Lausanne, Switzerland. http://hdl.handle.net/20.500.12708/97318 ( reposiTUm)

Stampfl, J., Liska, R., Spitzbart, M., Fischer, S., & Noll, H. (2005). 3D-Mikrostrukurerung funktionaler Materialien. Mikrotechniktage Dornbirn 2005, Dornbirn, Austria. http://hdl.handle.net/20.500.12708/92129 ( reposiTUm)

Lichtenegger, H. C., Liska, R., & Stampfl, J. (2005). STRUCMAT- Materialien für die Strukturierung mit 2-Photonenlithographie (TPA). ISOTEC-Kickoff-Meeting, Reinischkogel, Österreich, Austria. http://hdl.handle.net/20.500.12708/92147 ( reposiTUm)

Liska, R., & Haderer, C. (2005). Immobilisierte Fluoreszenzsensoren für die extrakorporale Blutreinigung. Seminar Fa. Ivoclar, Liechtenstein, Austria. http://hdl.handle.net/20.500.12708/96918 ( reposiTUm)

Liska, R., & Pich, C. (2005). Additionsreaktionen an funktionellen Polysiloxanen. Seminar Fa. NBG Coatings, Wien, Austria. http://hdl.handle.net/20.500.12708/96920 ( reposiTUm)

Liska, R., & Kopeinig, S. (2005). Neue Photoreaktive Gruppen. Seminar Fa. NBG Coatings, Wien, Austria. http://hdl.handle.net/20.500.12708/96919 ( reposiTUm)

Seidl, B., & Liska, R. (2005). 2-tert-Butylacrylonitrile, a Non-Polymerizable Monomer for the Investigation of Initiation Mechanism. RadTech Europe 2005, Barcelona, Spain, Austria. http://hdl.handle.net/20.500.12708/96931 ( reposiTUm)

Ullrich, G., Liska, R., Burtscher, P., Salz, U., & Moszner, N. (2005). Investigation of Phenylglycine Derivatives as Coinitiators. RadTech Europe 2005, Barcelona, Spain, Austria. http://hdl.handle.net/20.500.12708/96929 ( reposiTUm)

Kopeinig, S., & Liska, R. (2005). Further Covalently Bonded Photoinitiators. RadTech Europe 2005, Barcelona, Spain, Austria. http://hdl.handle.net/20.500.12708/96930 ( reposiTUm)

Inführ, R., Liska, R., Lichtenegger, H. C., Fritscher, C., Stampfl, J., & Hüsing, N. (2005). 3D Lithography of Organo-Soluble Mold Materials for Sol-Gel Nanocomposites. RadTech Europe 2005, Barcelona, Spain, Austria. http://hdl.handle.net/20.500.12708/96933 ( reposiTUm)

Schuster, M., Chen, S.-X., Liska, R., Turecek, C., Varga, F., & Stampfl, J. (2005). Photopolymerizable Biopolymers for Rapid Prototyping of Cellular Bone Repleacement Meterials. RadTech Europe 2005, Barcelona, Spain, Austria. http://hdl.handle.net/20.500.12708/96934 ( reposiTUm)

Liska, R. (2005). Biophotopolymere für Rapid Prototyping. Projektmeeting Fa. ISOTEC, Reinischkogel, Steiermark, Austria. http://hdl.handle.net/20.500.12708/96921 ( reposiTUm)

Schuster, M., Chen, S.-X., Liska, R., Rumpler, M., Turecek, C., Varga, F., & Stampfl, J. (2005). Development of Biodegradable Photopolymers for Bone Tissue Engineering. RadTech Europe 2005, Barcelona, Spain, Austria. http://hdl.handle.net/20.500.12708/96932 ( reposiTUm)

Liska, R., & Ganster, B. (2005). Neue Konzepte für bathochrom verschobene Photoinitiatoren. Seminar Fa. Ivoclar, Liechtenstein, Austria. http://hdl.handle.net/20.500.12708/96917 ( reposiTUm)

Liska, R., & Höfer, M. (2005). Reaktionen mit singulett Sauerstoff. Seminar Fa. Ivoclar, Liechtenstein, Austria. http://hdl.handle.net/20.500.12708/96916 ( reposiTUm)

Seidl, B., Kalinyaprak-Icten, K., & Liska, R. (2005). New Insights into 1,5-Diphenyl 1,4-Diynone as Ohotoinitiator. RadTech Europe 2005, Barcelona, Spain, Austria. http://hdl.handle.net/20.500.12708/96926 ( reposiTUm)

Ullrich, G., Jauk, S., Liska, R., Burtscher, P., & Moszner, N. (2005). How to Avoid the Back Electron Transfer in Type II Photoinitiators. RadTech Europe 2005, Barcelona, Spain, Austria. http://hdl.handle.net/20.500.12708/96927 ( reposiTUm)

Seidl, B., Kalinyaprak-Icten, K., Ullrich, G., & Liska, R. (2005). New Cross-Conjugated Photoinitiators. RadTech Europe 2005, Barcelona, Spain, Austria. http://hdl.handle.net/20.500.12708/96928 ( reposiTUm)

Liska, R. (2005). Photopolymere und ihre Anwendungen. Technische Universität Graz, Austria. http://hdl.handle.net/20.500.12708/96790 ( reposiTUm)

Fritscher, C., Lichtenegger, H. C., Stampfl, J., Hüsing, N., Liska, R., & Seidler, S. (2004). Fabrication of bio-inspired ceramic composites. Micro-mechanical properties of biomaterials, ECI-Conference, Tomar, Portugal, Austria. http://hdl.handle.net/20.500.12708/91964 ( reposiTUm)

Fritscher, C., Lichtenegger, H. C., Stampfl, J., Hüsing, N., Liska, R., & Seidler, S. (2004). Fabrication of bio-inspired ceramic composites. Junior Euromat 2004, Lausanne, Switzerland, Austria. http://hdl.handle.net/20.500.12708/91963 ( reposiTUm)

Spoljaric-Lukacic, L., Saf, R., Liska, R., & Knaus, S. (2004). Free Radical Grafting of Maleimides onto Polifines: Studie on Model Compounds. World Polymer Congress MACRO 2004, Paris, France, Austria. http://hdl.handle.net/20.500.12708/96600 ( reposiTUm)

Liska, R. (2004). Neue Photopolymere für Rapid Prototyping von zellularen Materialien. 1. Wiener Biomaterialsymposium, Wien, Austria. http://hdl.handle.net/20.500.12708/96598 ( reposiTUm)

Fritscher, C., Lichtenegger, H. C., Stampfl, J., Hüsing, N., Liska, R., & Seidler, S. (2004). Fabrication of bio-inspired ceramic composites. Micro-Mechanical Properties of Biomaterials, Tomar, Portugal, Austria. http://hdl.handle.net/20.500.12708/96609 ( reposiTUm)

Lichtenegger, H. C., Stampfl, J., Hüsing, N., Liska, R., & Seidler, S. (2004). Fabrication of bio-inspired ceramic composites. EUROMAT 2004, Lausanne, Schweiz, Austria. http://hdl.handle.net/20.500.12708/96610 ( reposiTUm)

Lichtenegger, H. C., Fritscher, C., Stampfl, J., Seidler, S., Hüsing, N., & Liska, R. (2004). 3-D templating of hierarchical materials. MRS Spring Meeting, San Francisco, United States of America (the). http://hdl.handle.net/20.500.12708/96571 ( reposiTUm)

Liska, R. (2003). Struktur und Reaktivität von Photoinitiatoren mit neuen Chromophoren. Institut für Nanostrukturierte Materialien und Photonik, Joanneum Research, Weiz, Österreich, Austria. http://hdl.handle.net/20.500.12708/96117 ( reposiTUm)

Liska, R. (2003). Wasserlösliche Polymere für den Einsatz in Rapid Prototyping. Technische Universität Wien - Institut für Werkstoffkunde und Materialprüfung, Wien, Austria. http://hdl.handle.net/20.500.12708/96107 ( reposiTUm)

Verdianz, T., & Liska, R. (2003). Grundlegende Untersuchungen zur Oberflächenmodifizierung von Polyimiden. VA TECH, Weiz, Austria. http://hdl.handle.net/20.500.12708/96599 ( reposiTUm)

Herzog, D., & Liska, R. (2001). New concepts for Type I Photoinitiators in Free Radical Polymerization. 5. Österreichische Polymertage, Leoben, Austria. http://hdl.handle.net/20.500.12708/95977 ( reposiTUm)

Fuß, N., & Liska, R. (2001). New Enon- and Inon-besed Type I Photoinitiators. 5. Österreichische Polymertage, Leoben, Austria. http://hdl.handle.net/20.500.12708/95978 ( reposiTUm)

Herzog, D., & Liska, R. (2001). Electron poor heterocyclic type I photoinitiators. RadTech Europe 2001, Basel, Schweiz, Austria. http://hdl.handle.net/20.500.12708/95969 ( reposiTUm)

Fuß, N., & Liska, R. (2001). New type I photoinitiators based on ynone derivatives. RadTech Europe 2001, Basel, Schweiz, Austria. http://hdl.handle.net/20.500.12708/95972 ( reposiTUm)

Müller, P., Pantschov, S., Liska, R., & Knaus, S. (2001). Synthesis and Grafting of Novel Hindered Amine Light Stabilizers onto Polypropylene. 5. Österreichische Polymertage, Leoben, Austria. http://hdl.handle.net/20.500.12708/95980 ( reposiTUm)

Lisak, K., Liska, R., & Knaus, S. (2001). Photochemical Immobilization of Aryl Azides onto Polypropylene Surfaces. 5. Österreichische Polymertage, Leoben, Austria. http://hdl.handle.net/20.500.12708/95979 ( reposiTUm)

Berichte

Qin, X.-H., Chen, J., Labuda, K., Hruschka, V., Liska, R., Redl, H., & Slezak, P. (2022). Molecularly Engineered PEG-TRAP Conjugates for Platelet Activation and Accelerated Hemostasis. https://doi.org/10.34726/4362 ( reposiTUm)

Gruber, S., Stampfl, J., Felzmann, R., Springer, S., & Liska, R. (2011). Lithographiebasierte Fertigung keramischer Bauteile (ISSN: 1614-0923). http://hdl.handle.net/20.500.12708/37037 ( reposiTUm)

Mautner, A., & Liska, R. (2010). Mechanische Eigenschaften. http://hdl.handle.net/20.500.12708/36279 ( reposiTUm)

Esfandiari, P., & Liska, R. (2010). Synthesis of new components I. http://hdl.handle.net/20.500.12708/36274 ( reposiTUm)

Esfandiari, P., & Liska, R. (2010). Synthesis of new components II. http://hdl.handle.net/20.500.12708/36275 ( reposiTUm)

Gugg, A., & Liska, R. (2010). Reaktivitäten spezieller Formulierungen. http://hdl.handle.net/20.500.12708/36276 ( reposiTUm)

Mautner, A., & Liska, R. (2010). Herstellung von Probekörpern. http://hdl.handle.net/20.500.12708/36278 ( reposiTUm)

Gugg, A., & Liska, R. (2009). Synthese neuer Monomere für Dentale Füllmaterialien. http://hdl.handle.net/20.500.12708/36167 ( reposiTUm)

Esfandiari, P., & Liska, R. (2009). Interaction of Additives in Photopolymerizable Formulations. http://hdl.handle.net/20.500.12708/36173 ( reposiTUm)

Esfandiari, P., & Liska, R. (2009). Photo-DSC of new Formulations. http://hdl.handle.net/20.500.12708/36171 ( reposiTUm)

Esfandiari, P., & Liska, R. (2009). Molecular Weight distribution in Photopolymerizable Formulations. http://hdl.handle.net/20.500.12708/36174 ( reposiTUm)

Esfandiari, P., & Liska, R. (2009). Rheological Investigations of new Formulations. http://hdl.handle.net/20.500.12708/36172 ( reposiTUm)

Gugg, A., & Liska, R. (2009). Reaktivitätsmessungen spezieller Formulierungen. http://hdl.handle.net/20.500.12708/36273 ( reposiTUm)

Mautner, A., & Liska, R. (2009). Evaluierung unterschiedlicher Polymere. http://hdl.handle.net/20.500.12708/36277 ( reposiTUm)

Gugg, A., & Liska, R. (2009). Molekulargewichtsbestimmung. http://hdl.handle.net/20.500.12708/36168 ( reposiTUm)

Gugg, A., & Liska, R. (2009). Lagerstabilitätsuntersuchungen für Dentale Füllmaterialien. http://hdl.handle.net/20.500.12708/36169 ( reposiTUm)

Landertshamer, S., & Liska, R. (2008). Hydrophobe Komponenten für die Kationische Photopolymerisation von Siliconen. http://hdl.handle.net/20.500.12708/35003 ( reposiTUm)

Gugg, A., & Liska, R. (2008). Acylgermaniumverbindungen. http://hdl.handle.net/20.500.12708/35004 ( reposiTUm)

Liska, R. (2008). Photoinitiatoren mit ß-phenyloger Spaltung - P19769-N14. http://hdl.handle.net/20.500.12708/35010 ( reposiTUm)

Liska, R. (2008). Bericht für FWF: Photoinitiatoren mit kreuz-konjugiertem System - P18623-N17. http://hdl.handle.net/20.500.12708/35011 ( reposiTUm)

Landertshamer, S., & Liska, R. (2008). Photoinitiatoren für die Kationische Photopolymerisation von Siliconen. http://hdl.handle.net/20.500.12708/35002 ( reposiTUm)

Esfandiari, P., & Liska, R. (2008). State of the art in Rapid prototyping formulations. http://hdl.handle.net/20.500.12708/35006 ( reposiTUm)

Esfandiari, P., & Liska, R. (2008). Screening of additives for RP. http://hdl.handle.net/20.500.12708/35007 ( reposiTUm)

Gugg, A., & Liska, R. (2008). Acylgermaniumverbindungen II. http://hdl.handle.net/20.500.12708/35005 ( reposiTUm)

Esfandiari, P., & Liska, R. (2008). Synthesis of new monomers. http://hdl.handle.net/20.500.12708/35009 ( reposiTUm)

Esfandiari, P., & Liska, R. (2008). Development of monomer formulation for RP. http://hdl.handle.net/20.500.12708/35008 ( reposiTUm)

Esfandiari, P., & Liska, R. (2008). Evaluation of new Formulations. http://hdl.handle.net/20.500.12708/36170 ( reposiTUm)

Gugg, A., & Liska, R. (2008). Neue Konzepte für Dentale Füllmaterialien. http://hdl.handle.net/20.500.12708/36166 ( reposiTUm)

Liska, R., & Ganster, B. (2007). Photoprodukte aus bathochrom verschobenen Photoinitiatoren. http://hdl.handle.net/20.500.12708/32719 ( reposiTUm)

Liska, R. (2007). Photochemie von Diynonen - Zwischenbericht (FWF (Projekt P18623-N17)). http://hdl.handle.net/20.500.12708/32721 ( reposiTUm)

Liska, R. (2007). Cross-conjugated Photoinitiators (FWF (P18623-N17)). http://hdl.handle.net/20.500.12708/32720 ( reposiTUm)

Liska, R., & Ganster, B. (2007). Photochemie bathochrom verschobener Photoinitiatoren. http://hdl.handle.net/20.500.12708/32715 ( reposiTUm)

Liska, R., Ganster, B., & Gugg, A. (2007). Photoinitiatoren auf Basis von Acylgermaniumverbindungen. http://hdl.handle.net/20.500.12708/32716 ( reposiTUm)

Liska, R., & Landertshamer, S. (2007). Synthese neuer Sensitizer für die kationische Polymerisation. http://hdl.handle.net/20.500.12708/32717 ( reposiTUm)

Liska, R., & Ganster, B. (2007). Photolysestudien an bathochrom verschobenen Photoinitiatoren. http://hdl.handle.net/20.500.12708/32718 ( reposiTUm)

Liska, R., & Ganster, B. (2006). Photoinitiatoren mit Absorption im Vis-Bereich. http://hdl.handle.net/20.500.12708/32549 ( reposiTUm)

Liska, R., & Kopeinig, S. (2006). Evaluierung neuer photoreaktiver Gruppen für Siliconharze. http://hdl.handle.net/20.500.12708/32545 ( reposiTUm)

Liska, R., & Kopeinig, S. (2006). Equilibrierungsreaktionen in Siliconharzen. http://hdl.handle.net/20.500.12708/32548 ( reposiTUm)

Haderer, C., Liska, R., Knaus, S., & Gruber, H. (2006). Immobilisierte Fluoreszenssensoren für die extrakorporale Blutreinigung. http://hdl.handle.net/20.500.12708/32550 ( reposiTUm)

Liska, R., & Ganster, B. (2006). Synthese bathochrom verschobener Photoinitiatoren. http://hdl.handle.net/20.500.12708/32529 ( reposiTUm)

Liska, R., & Höfer, M. (2006). Endoperoxide mit singulett Sauerstoff. http://hdl.handle.net/20.500.12708/32531 ( reposiTUm)

Liska, R., & Kopeinig, S. (2006). Modellverbindungen für Polysiloxane. http://hdl.handle.net/20.500.12708/32528 ( reposiTUm)

Liska, R., & Haderer, C. (2006). Synthese von Fluoreszenzsensoren. http://hdl.handle.net/20.500.12708/32530 ( reposiTUm)

Liska, R., & Ullrich, G. (2005). Prüfung der Lagerstabilität neuer Typ I Initiatoren für die Photopolymerisation. http://hdl.handle.net/20.500.12708/32343 ( reposiTUm)

Liska, R., & Ganster, B. (2005). Lagerstabilitäts- und Reaktivitätsuntersuchungen neuer Typ I Photoinitiatoren. http://hdl.handle.net/20.500.12708/32345 ( reposiTUm)

Liska, R., & Kopeinig, S. (2005). Synthese modifizierter Polysiloxane. http://hdl.handle.net/20.500.12708/32400 ( reposiTUm)

Liska, R., & Pich, C. (2005). Photoreaktivität von Silkonacrylaten. http://hdl.handle.net/20.500.12708/32401 ( reposiTUm)

Liska, R., Knaus, S., & Gruber, H. (2005). Viscosity Measurements. http://hdl.handle.net/20.500.12708/32432 ( reposiTUm)

Liska, R., Knaus, S., & Gruber, H. (2005). Functionalization of PTHF. http://hdl.handle.net/20.500.12708/32431 ( reposiTUm)

Liska, R., & Haderer, C. (2005). Immobilisierte Fluoreszenzsensoren für die extrakorporale Blutreinigung. http://hdl.handle.net/20.500.12708/32420 ( reposiTUm)

Liska, R., & Ganster, B. (2005). Neue Konzepte für bathochrom verschobene Photoinitiatoren. http://hdl.handle.net/20.500.12708/32419 ( reposiTUm)

Liska, R., & Höfer, M. (2005). Reaktionen mit singulett Sauerstoff. http://hdl.handle.net/20.500.12708/32418 ( reposiTUm)

Liska, R., & Pich, C. (2005). Additionsreaktionen an funktionellen Polysiloxanen. http://hdl.handle.net/20.500.12708/32422 ( reposiTUm)

Liska, R., & Kopeinig, S. (2005). Neue Photoreaktive Gruppen. http://hdl.handle.net/20.500.12708/32421 ( reposiTUm)

Liska, R. (2005). Biophotopolymere für Rapid Prototyping. http://hdl.handle.net/20.500.12708/32423 ( reposiTUm)

Liska, R., & Ullrich, G. (2005). Evaluierung von Photoinitiatoren in wässrigen Primerformulierungen. http://hdl.handle.net/20.500.12708/32397 ( reposiTUm)

Liska, R., & Ganster, B. (2005). Photoinitiatoren mit hydrophilen Gruppen. http://hdl.handle.net/20.500.12708/32396 ( reposiTUm)

Liska, R., & Kopeinig, S. (2005). Äqulibrierung von Polysiloxanen. http://hdl.handle.net/20.500.12708/32398 ( reposiTUm)

Liska, R., & Pich, C. (2005). Neue Photoinitiatoren für Silkonacrylate. http://hdl.handle.net/20.500.12708/32399 ( reposiTUm)

Liska, R., & Ganster, B. (2004). Synthese neuer Typ I Initiatoren für die Photopolymerisation im sichtbaren Lichtbereich. http://hdl.handle.net/20.500.12708/32344 ( reposiTUm)

Liska, R., & Ullrich, G. (2004). Synthese und Prüfung neuer Diinone als Photoinitiatoren. http://hdl.handle.net/20.500.12708/32340 ( reposiTUm)

Liska, R., & Ullrich, G. (2004). Synthese alpha-spaltender Photoinitiatoren. http://hdl.handle.net/20.500.12708/32342 ( reposiTUm)

Liska, R., & Ullrich, G. (2004). Thiouroniumverbindungen für die Photopolymerisation. http://hdl.handle.net/20.500.12708/32341 ( reposiTUm)

Liska, R., & Kopeinig, S. (2004). Evaluierung neuer photoreaktiver Gruppen für Siliconharze. http://hdl.handle.net/20.500.12708/32348 ( reposiTUm)

Liska, R., & Pich, C. (2004). Reduktion der Sauerstoffinhibierung in Siliconacrylaten. http://hdl.handle.net/20.500.12708/32347 ( reposiTUm)

Liska, R., & Pich, C. (2004). Analyse von Siliconacrylaten. http://hdl.handle.net/20.500.12708/32346 ( reposiTUm)

Liska, R., & Ullrich, G. (2003). Synthese und Prüfung modifizierter N-Phenylglycinderivate für die Photopolymerisation. http://hdl.handle.net/20.500.12708/32338 ( reposiTUm)

Liska, R., & Ullrich, G. (2003). Aromatische Amine und Phenylglycinderivate als Coinitiatoren für Campherchinon. http://hdl.handle.net/20.500.12708/32337 ( reposiTUm)

Liska, R., & Ullrich, G. (2003). Photochemisch spaltbare Schutzgruppen für N-Phenylglycine. http://hdl.handle.net/20.500.12708/32339 ( reposiTUm)

Verdianz, T., & Liska, R. (2003). Grundlegende Untersuchungen zur Oberflächenmodifizierung von Polyimiden. http://hdl.handle.net/20.500.12708/32354 ( reposiTUm)

Liska, R., & Ullrich, G. (2003). Evaluierung verschiedener Coinitiatoren für Campherchinon in der Photopolymerisation. http://hdl.handle.net/20.500.12708/32336 ( reposiTUm)

Ullrich, G., & Liska, R. (2002). Struktur/Reaktivitätsuntersuchungen an Photoinitiatoren in der Dentaltechnik. http://hdl.handle.net/20.500.12708/32152 ( reposiTUm)

Verdianz, T., & Liska, R. (2002). Oberflächenmodifizierung von lackierten Kupferdrähten für verbesserte Härtungs- und Haftungseigenschaften mit der umgebenden Harzmatrix. http://hdl.handle.net/20.500.12708/32150 ( reposiTUm)

Herzog, D., & Liska, R. (2002). Synthese und Prüfung funktioneller Campherchinone. http://hdl.handle.net/20.500.12708/32151 ( reposiTUm)

Schwager, F., & Liska, R. (2002). Wasserlösliche Polymere für Rapid Prototyping biometrischer Werkstoffe. http://hdl.handle.net/20.500.12708/32149 ( reposiTUm)

Preprints

Göschl, M., Laa, D., Koch, T., Constable, E., Pimenov, A., Stampfl, J., Liska, R., & Ehrmann, K. (2025). Two for one: Semi-crystalline and amorphous materials via multi-temperature 3D printing from one formulation. ChemRxiv. https://doi.org/10.34726/10479 ( reposiTUm)

Ahmadi, M., Ehrmann, K., Göschl, M., Koch, T., Liska, R., & Stampfl, J. (2024). Photopolymerization Induced Phase Separation in (Meth)Acrylate-Based Photopolymers from a Characterization Point of View. ( reposiTUm)

Göschl, M., Laa, D., Ahmadi, M., Koch, T., Stampfl, J., Ehrmann, K., & Liska, R. (2024). Trapping crystallinity in highly crosslinked thermosets by light-based 3D printing from the liquid crystalline phase. ChemRxiv. https://doi.org/10.34726/10499 ( reposiTUm)

Mayer, F., Laa, D., Koch, T., Stampfl, J., Liska, R., & Ehrmann, K. (2024). Rapid 3D printing of unlayered, tough epoxy-alcohol resins with late gel points via dual-color curing technology. ChemRxiv. https://doi.org/10.26434/chemrxiv-2024-9k7q2 ( reposiTUm)

Multimedia & Design

Ecker, J., Liska, R., & Stampfl, J. (2024). Design for Disassembly: Using a multi-material approach in 3D printing for easier recycling strategies [Video]. Technische Universität Wien. ( reposiTUm)

Hochschulschriften

Liska, R. (2006). New concepts in photopolymerization [Professorial Dissertation, Technische Universität Wien]. reposiTUm. http://hdl.handle.net/20.500.12708/185110 ( reposiTUm)