Wissenschaftliche Artikel

Ahmadi, M., Ehrmann, K., Göschl, M., Schlossgangl, P., Koch, T., Liska, R., & Stampfl, J. (2025). Photopolymerization‐induced phase separation in (meth)acrylate‐based photopolymers from a characterization point of view. Journal of Applied Polymer Science, Article e57404. https://doi.org/10.1002/app.57404 ( reposiTUm)
Nistler, S., Hofstetter, C., Baudis, S., Schwentenwein, M., & Stampfl, J. (2025). Sinter-joining of two different bioceramic materials. Open Ceramics, 22, Article 100759. https://doi.org/10.1016/j.oceram.2025.100759 ( reposiTUm)
Nistler, S., Hofstetter, C., Baudis, S., Schwentenwein, M., & Stampfl, J. (2025). Sinter-joined bioceramics for hybrid bone implants. Transactions on Additive Manufacturing Meets Medicine, 7(S1), Article 2095. https://doi.org/10.18416/AMMM.2025.25062095 ( reposiTUm)
Ableidinger, K., Laa, D., Chalupa-Gantner, F., Gjata, E., Knaack, P., Ovsianikov, A., Stampfl, J., Slugovc, C., & Liska, R. (2025). Investigation of Lewis photobase-catalysed oxa-Michael addition for hot lithography. MATERIALS HORIZONS. https://doi.org/10.1039/d5mh01050k ( reposiTUm)
Bogdanovic, D., Wolff, R., Mete, Y. D., Koch, T., Stampfl, J., Baudis, S., Ehrmann, K., & Liska, R. (2024). 3D printable aliphatic polycarbonate networks from cationic ring-opening photopolymerization of spiro-orthocarbonates. European Polymer Journal, 208, Article 112876. https://doi.org/10.1016/j.eurpolymj.2024.112876 ( reposiTUm)
Ahmadi, M., Ehrmann, K., Koch, T., Liska, R., & Stampfl, J. (2024). From Unregulated Networks to Designed Microstructures: Introducing Heterogeneity at Different Length Scales in Photopolymers for Additive Manufacturing. Chemical Reviews, 124(7), 3978–4020. https://doi.org/10.1021/acs.chemrev.3c00570 ( reposiTUm)
Stampfl, J., & Danninger, H. (2024). Editorial. BHM Berg- Und Hüttenmännische Monatshefte, 169(1), 1–2. https://doi.org/10.1007/s00501-023-01415-7 ( reposiTUm)
Ecker, J., Liska, R., & Stampfl, J. (2024). Design for disassembly: Using a multi-material approach in 3D printing for easier recycling strategies. Additive Manufacturing, 92, 1–13. https://doi.org/10.1016/j.addma.2024.104394 ( reposiTUm)
Mayer, F., Laa, D., Koch, T., Stampfl, J., Liska, R., & Ehrmann, K. (2024). Rapid 3D printing of unlayered, tough epoxy-alcohol resins with late gel points via dual-color curing technology. MATERIALS HORIZONS. https://doi.org/10.1039/d4mh01261e ( reposiTUm)
Pezzana, L., Wolff, R., Stampfl, J., Liska, R., & Sangermano, M. (2024). High temperature vat photopolymerization 3D printing of fully bio-based composites: Green vegetable oil epoxy matrix & bio-derived filler powder. Additive Manufacturing, 79, Article 103929. https://doi.org/10.1016/j.addma.2023.103929 ( reposiTUm)
Kojic, D., Ehrmann, K., Wolff, R., Mete, Y., Koch, T., Stampfl, J., Baudis, S., & Liska, R. (2023). Stereolithographic 3D printing of pure poly(ether–ester) networks from spirocyclic monomers via cationic ring-opening photopolymerization at high temperatures. Polymer Chemistry, 14(42), 4809–4818. https://doi.org/10.1039/D3PY00787A ( reposiTUm)
Sinawehl, L., Wolff, R., Koch, T., Stampfl, J., Liska, R., & Baudis, S. (2023). Photopolymers based on boronic esters for the enhanced degradation of 3D-printed scaffolds. ACS Applied Polymer Materials, 5(7), 5758–5771. https://doi.org/10.1021/acsapm.3c01000 ( reposiTUm)
Ruppitsch, L. A., Ecker, J., Koch, T., Ehrmann, K., Stampfl, J., & Liska, R. (2023). Dynamic monomers for hot lithography: the UPy motif as a versatile tool towards stress relaxation, reprocessability, and 3D printing. Journal of Polymer Science, 61(13), 1318–1334. https://doi.org/10.1002/pol.20220721 ( reposiTUm)
Wolff, R., Knaack, P., Seidler, K., Gorsche, C., Koch, T., Stampfl, J., & Liska, R. (2023). Additive manufacturing of high-performance polycyanurates via photo-induced catalytic poly-trimerization. Journal of Materials Chemistry A, 11(20), 10545–10550. https://doi.org/10.1039/D3TA01264F ( reposiTUm)
Schandl, S., Koch, T., Stampfl, J., Ehrmann, K., & Liska, R. (2023). Pure aliphatic polycarbonate networks via photoinduced anionic ring-opening polymerization at elevated temperature. Reactive and Functional Polymers, 182, Article 105460. https://doi.org/10.1016/j.reactfunctpolym.2022.105460 ( reposiTUm)
Fantoni, A., Ecker, J., Ahmadi, M., Koch, T., Stampfl, J., Liska, R., & Baudis, S. (2023). Green monomers for 3D printing: epoxy-methacrylate interpenetrating polymer networks as a versatile alternative for toughness enhancement in additive manufacturing. ACS SUSTAINABLE CHEMISTRY & ENGINEERING, 11(32), 12004–12013. https://doi.org/10.1021/acssuschemeng.3c02194 ( reposiTUm)
Taschner, R., Koch, T., Wolff, R., Stampfl, J., Liska, R., & Knaack, P. (2023). Evaluation of sulfonium borate initiators for cationic photopolymerization and their application in hot lithography. ACS Applied Polymer Materials, 5(4), 3023–3033. https://doi.org/10.1021/acsapm.3c00191 ( reposiTUm)
Hobiger, V., Kutsch, A.-L., Stampfl, J., Liska, R., Baudis, S., & Krajnc, P. (2023). Thiol-Acrylate polyHIPEs via Facile Layer-by-Layer Photopolymerization. 3D Printing and Additive Manufacturing. https://doi.org/10.1089/3dp.2022.0289 ( reposiTUm)
Stampfl, J., Schwentenwein, M., Homa, J., & Prinz, F. B. (2023). Lithography-based additive manufacturing of ceramics: Materials, applications and perspectives. MRS Communications, 13(5), 786–794. https://doi.org/10.1557/s43579-023-00444-0 ( reposiTUm)
Marian, M., Zambrano, D., Rothammer, B., Waltenberger, V., Boidi, G., Krapf, A., Merle, B., Stampfl, J., Rosenkranz, A., Gachot, C., & Grützmacher, P. (2023). Combining multi-scale surface texturing and DLC coatings for improved tribological performance of 3D printed polymers. Surface and Coatings Technology, 466, Article 129682. https://doi.org/10.1016/j.surfcoat.2023.129682 ( reposiTUm)
Wolff, R., Ehrmann, K., Knaack, P., Seidler, K., Gorsche, C., Koch, T., Stampfl, J., & Liska, R. (2022). Photo-chemically induced polycondensation of a pure phenolic resin for additive manufacturing. Polymer Chemistry, 13(6), 768–777. https://doi.org/10.1039/D1PY01665B ( reposiTUm)
Kury, M., Ehrmann, K., Gorsche, C., Dorfinger, P., Koch, T., Stampfl, J., & Liska, R. (2022). Regulated acrylate networks as tough photocurable materials for additive manufacturing. Polymer International, 71(7), 897–905. https://doi.org/10.34726/3441 ( reposiTUm)
Stögerer, J., Baumgartner, S., Rath, T., & Stampfl, J. (2022). Analysis of the mechanical anisotropy of stereolithographic 3D printed polymer composites. European Journal of Materials, 2(1), 12–32. https://doi.org/10.1080/26889277.2022.2035196 ( reposiTUm)
Hochwallner, A., & Stampfl, J. (2022). A Martini 3 coarse-grain model for the simulation of the photopolymerizable organic phase in dental composites. RSC Advances, 12, 12053–12059. https://doi.org/10.1039/d2ra00732k ( reposiTUm)
Stevanović, M., Filipovic, N., Kuzmanović, M., Tomić, N., Ušjak, D., Milenković, M., Zheng, K., Juergen Stampfl, & Boccaccini, A. R. (2022). Synthesis and characterization of a collagen-based composite material containing selenium nanoparticles. Journal of Biomaterials Applications, 36(10). https://doi.org/10.1177/08853282211073731 ( reposiTUm)
Pezzana, L., Wolff, R., Melilli, G., Guigo, N., SBIRRAZZUOLI, N., Stampfl, J., Liska, R., & Sangermano, M. (2022). Hot-lithography 3D printing of biobased epoxy resins. Polymer, 254, 125097. https://doi.org/10.1016/j.polymer.2022.125097 ( reposiTUm)
Steindl, J., Ehrmann, K., Gorsche, C., Huang, C.-C., Koch, T., Steinbauer, P., Rohatschek, A., Andriotis, O. G., Thurner, P. J., Prado‐Roller, A., Stampfl, J., & Liska, R. (2022). Maleimide‐styrene‐butadiene terpolymers: acrylonitrile‐butadiene‐styrene inspired photopolymers for additive manufacturing. Polymer International, 71(7), 856–866. https://doi.org/10.1002/pi.6351 ( reposiTUm)
Hartmann, M., Pfaffinger, M., & Stampfl, J. (2021). The role of solvents in Lithography-based Ceramic Manufacturing of lithium disilicate. Materials, 14(4), 1045. https://doi.org/10.3390/ma14041045 ( reposiTUm)
Grunenberg, D., Ehrmann, K., Gorsche, C., Steyrer, B., Koch, T., Stampfl, J., & Liska, R. (2021). Heterotelechelic poly(propylene oxide) as migration-inhibited toughening agent in hot lithography based additive manufacturing. Polymer Chemistry, 12(9), 1260–1272. https://doi.org/10.1039/d0py01746a ( reposiTUm)
Rath, T., Martl, O., Steyrer, B., Seidler, K., Addison, R., Holzhausen, E., & Stampfl, J. (2021). Developing an ivory-like material for stereolithography-based additive manufacturing. Applied Materials Today, 23(101016), 101016. https://doi.org/10.1016/j.apmt.2021.101016 ( reposiTUm)
Baumgartner, S., Gmeiner, R., Schönherr, J. A., & Stampfl, J. (2020). Stereolithography-based additive manufacturing of lithium disilicate glass ceramic for dental applications. Materials Science and Engineering: C, 116(111180), 111180. https://doi.org/10.1016/j.msec.2020.111180 ( reposiTUm)
Stögerer, J., Baumgartner, S., Hochwallner, A., & Stampfl, J. (2020). Bio-inspired toughening of composites in 3D-printing. Materials, 13(21), 4714. https://doi.org/10.3390/ma13214714 ( reposiTUm)
Dall’Argine, C., Hochwallner, A., Klikovits, N., Liska, R., Stampf, J., & Sangermano, M. (2020). Hot‐Lithography SLA‐3D Printing of Epoxy Resin. Macromolecular Materials and Engineering, 305(10), 2000325. https://doi.org/10.1002/mame.202000325 ( reposiTUm)
Klikovits, N., Sinawehl, L., Knaack, P., Koch, T., Stampfl, J., Gorsche, C., & Liska, R. (2020). UV-Induced Cationic Ring-Opening Polymerization of 2-Oxazolines for Hot Lithography. ACS Macro Letters, 9(4), 546–551. https://doi.org/10.1021/acsmacrolett.0c00055 ( reposiTUm)
Hartmann, M., & Stampfl, J. (2019). Additive Fertigung in der digitalen Zahnheilkunde. BHM Berg- und Hüttenmännische Monatshefte, 164, 141–146. https://doi.org/10.1007/s00501-019-0834-0 ( reposiTUm)
Seidler, K., Griesser, M., Kury, M., Reghunathan, H., Dorfinger, P., Koch, T., Svirkova, A., Marchetti-Deschmann, M., Stampfl, J., Moszner, N., Gorsche, C., & Liska, R. (2018). Vinyl Sulfonate Esters: Efficient Chain Transfer Agents for the 3D Printing of Tough Photopolymers without Retardation. Angewandte Chemie International Edition, 57(29), 9165–9169. https://doi.org/10.1002/anie.201803747 ( reposiTUm)
Steyrer, B., Busetti, B., Harakály, G., Liska, R., & Stampfl, J. (2018). Hot Lithography vs. room temperature DLP 3D-printing of a dimethacrylate. Additive Manufacturing, 21, 209–214. https://doi.org/10.1016/j.addma.2018.03.013 ( reposiTUm)
Busetti, B., Steyrer, B., Lutzer, B., Reiter, R., & Stampfl, J. (2018). A hybrid exposure concept for lithography-based additive manufacturing. Additive Manufacturing, 21, 413–421. https://doi.org/10.1016/j.addma.2018.03.024 ( reposiTUm)
Peer, G., Dorfinger, P., Koch, T., Stampfl, J., Gorsche, C., & Liska, R. (2018). Photopolymerization of Cyclopolymerizable Monomers and Their Application in Hot Lithography. Macromolecules, 51(22), 9344–9353. https://doi.org/10.1021/acs.macromol.8b01991 ( reposiTUm)
Hofstetter, C., Orman, S., Baudis, S., & Stampfl, J. (2018). Combining cure depth and cure degree, a new way to fully characterize novel photopolymers. Additive Manufacturing, 24, 166–172. https://doi.org/10.1016/j.addma.2018.09.025 ( reposiTUm)
Wang, J., Stanic, S. D., Altun, A. A., Schwentenwein, M., Dietliker, K., Jin, L., Stampfl, J., Baudis, S., Liska, R., & Grützmacher, H. (2018). A highly efficient waterborne photoinitiator for visible-light-induced three-dimensional printing of hydrogels. Chemical Communications, 54(8), 920–923. https://doi.org/10.1039/c7cc09313f ( reposiTUm)
Pfaffinger, M., Hartmann, M., Schwentenwein, M., & Stampfl, J. (2017). Stabilization of tricalcium phosphate slurries against sedimentation for stereolithographic additive manufacturing and influence on the final mechanical properties. International Journal of Applied Ceramic Technology, 14(4), 499–506. http://hdl.handle.net/20.500.12708/146430 ( reposiTUm)
Ligon, S. C., Liska, R., Stampfl, J., Gurr, M., & Mulhaupt, R. (2017). Polymers for 3D Printing and Customized Additive Manufacturing. Chemical Reviews, 117(15), 10212–10290. https://doi.org/10.1021/acs.chemrev.7b00074 ( reposiTUm)
Steyrer, B., Neubauer, P., Liska, R., & Stampfl, J. (2017). Visible Light Photoinitiator for 3D-Printing of Tough Methacrylate Resins. Materials, 10(12), 1445. https://doi.org/10.3390/ma10121445 ( reposiTUm)
Mautner, A., Steinbauer, B., Russmüller, G., Lieber, R., Koch, T., Stampfl, J., & Liska, R. (2016). Vinyl carbonate photopolymers with improved mechanical properties for biomedical applications. DESIGNED MONOMERS AND POLYMERS, 19(5), 437–444. https://doi.org/10.1080/15685551.2016.1169378 ( reposiTUm)
Mautner, A., Steinbauer, B., Orman, S., Russmüller, G., Macfelda, K., Koch, T., Stampfl, J., & Liska, R. (2016). Tough photopolymers based on vinyl esters for biomedical applications. Journal of Polymer Science Part A: Polymer Chemistry, 54(13), 1987–1997. http://hdl.handle.net/20.500.12708/148648 ( reposiTUm)
Gorsche, C., Seidler, K., Knaack, P., Dorfinger, P., Koch, T., Stampfl, J., Moszner, N., & Liska, R. (2016). Rapid formation of regulated methacrylate networks yielding tough materials for lithography-based 3D printing. Polymer Chemistry. https://doi.org/10.1039/C5PY02009C ( reposiTUm)
de Blas Romero, A., Pfaffinger, M., Mitteramskogler, G., Schwentenwein, M., Jellinek, C., Homa, J., Díaz Lantada, A., & Stampfl, J. (2016). Lithography-based additive manufacture of ceramic biodevices with design-controlled surface topographies. International Journal of Advanced Manufacturing Technology, 88(5–8), 1547–1555. https://doi.org/10.1007/s00170-016-8856-1 ( reposiTUm)
Ligon-Auer, S. C., Schwentenwein, M., Gorsche, C., Stampfl, J., & Liska, R. (2016). Toughening of photo-curable polymer networks: a review. Polymer Chemistry, 7(2), 257–286. https://doi.org/10.1039/c5py01631b ( reposiTUm)
Gmeiner, R., Mitteramskogler, G., Stampfl, J., & Boccaccini, A. (2015). Stereolithographic Ceramic Manufacturing of High Strength Bioactive Glass. International Journal of Applied Ceramic Technology, 12(1), 38–45. http://hdl.handle.net/20.500.12708/150404 ( reposiTUm)
Buchmayr, B., & Stampfl, J. (2015). MAMC 2014: Vienna’s Metal AM Conference reports on progress in a rapidly changing industry. Metal Additive Manufacturing, 1(1), 53–60. http://hdl.handle.net/20.500.12708/151265 ( reposiTUm)
Ajami, A., Gruber, P., Tromayer, M., Husinsky, W., Stampfl, J., Liska, R., & Ovsianikov, A. (2015). Evidence of concentration dependence of the two-photon absorption cross section: Determining the “‘true’” cross section value. Optical Materials, 47, 524–529. https://doi.org/10.1016/j.optmat.2015.06.033 ( reposiTUm)
Gmeiner, R., Deisinger, U., Schönherr, J.-A., Lechner, B., Detsch, R., Boccaccini, A., & Stampfl, J. (2015). Additive Manufacturing of Bioactive Glasses and Silicate Bioceramics. Journal of Ceramic Science and Technology, 6(2), 75–86. https://doi.org/10.4416/JCST2015-00001 ( reposiTUm)
Russmueller, G., Liska, R., Stampfl, J., Heller, C., Mautner, A., Macfelda, K., Kapeller, B., Lieber, R., Haider, A., Mika, K., Schopper, C., Perisanidis, C., Seemann, R., & Moser, D. (2015). 3D Printable Biophotopolymers for in vivo Bone Regeneration. Materials, 8(6), 3685–3700. https://doi.org/10.3390/ma8063685 ( reposiTUm)
Mitteramskogler, G., Gmeiner, R., Felzmann, R., Gruber, S., Hofstetter, C., Stampfl, J., Ebert, J., Wachter, W., & Laubersheimer, J. (2014). Light curing strategies for lithography-based additive manufacturing of customized ceramics. Additive Manufacturing, 1–4, 110–118. https://doi.org/10.1016/j.addma.2014.08.003 ( reposiTUm)
Petrochenko, P., Torgersen, J., Gruber, P., Hicks, L., Zheng, J., Kumar, G., Narayan, R., Goering, P., Liska, R., Stampfl, J., & Ovsianikov, A. (2014). Laser 3D Printing with Sub‐Microscale Resolution of Porous Elastomeric Scaffolds for Supporting Human Bone Stem Cells. Advanced Healthcare Materials, #(#). http://hdl.handle.net/20.500.12708/157469 ( reposiTUm)
Qin, X.-H., Ovsianikov, A., Stampfl, J., & Liska, R. (2014). Additive manufacturing of photosensitive hydrogels for tissue engineering applications. BioNanoMaterials. https://doi.org/10.1515/bnm-2014-0008 ( reposiTUm)
Ovsianikov, A., Mühleder, S., Torgersen, J., Zhiquan, L., Qin, X.-H., Van Vlierberghe, S., Dubruel, P., Holnthoner, W., Redl, H., Liska, R., & Stampfl, J. (2014). Laser Photofabrication of Cell-Containing Hydrogel Constructs. Langmuir, 30(13), 3787–3794. https://doi.org/10.1021/la402346z ( reposiTUm)
Qin, X.-H., Gruber, P., Markovic, M., Plochberger, B., Klotzsch, E., Stampfl, J., Ovsianikov, A., & Liska, R. (2014). Enzymatic synthesis of hyaluronic acid vinyl esters for two-photon microfabrication of biocompatible and biodegradable hydrogel constructs. Polymer Chemistry. https://doi.org/10.1039/c4py00792a ( reposiTUm)
Kupfmüller, J., Li, Z., Satzinger, V., Stampfl, J., & Liska, R. (2013). Two-photon-induced thiol-ene polymerization as a fabrication tool for flexible optical waveguides. Designed Monomers and Polymers, #?, 1–11. http://hdl.handle.net/20.500.12708/155396 ( reposiTUm)
Qin, X., Torgersen, J., Saf, R., Mühleder, S., Pucher, N. U., Ligon, S., Holnthoner, W., Redl, H., Ovsianikov, A., Stampfl, J., & Liska, R. (2013). Three-Dimensional Microfabrication of Protein Hydrogels via Two-Photon-Excited Thiol-Vinyl Ester Photopolymerization. Journal of Polymer Science Part A: Polymer Chemistry, 51, 4799–4810. http://hdl.handle.net/20.500.12708/155393 ( reposiTUm)
Li, Z., Stankevičius, E., Ajami, A., Račiukaitis, G., Husinsky, W., Ovsianikov, A., Stampfl, J., & Liska, R. (2013). 3D alkyne-azide cycloaddition: spatiotemporally controlled by combination of aryl azide photochemistry and two-photon grafting. Chemical Communications, 49(69), 7635. https://doi.org/10.1039/c3cc43533d ( reposiTUm)
Li, Z., Pucher, N., Cicha, K., Torgersen, J., Ligon, S. C., Ajami, A., Husinsky, W., Rosspeintner, A., Vauthey, E., Naumov, S., Scherzer, T., Stampfl, J., & Liska, R. (2013). Straightforward Synthesis and Structure-Activity Relationship of Highly Efficient Initiators for Two-Photon Polymerization. Macromolecules, 46(2), 352–361. https://doi.org/10.1021/ma301770a ( reposiTUm)
Torgersen, J., Qin, X., Li, Z., Ovsianikov, A., Liska, R., & Stampfl, J. (2013). Hydrogels for Two-Photon Polymerization: A Toolbox for Mimicking the Extracellular Matrix. Advanced Functional Materials, 10(6). http://hdl.handle.net/20.500.12708/155051 ( reposiTUm)
Susec, M., Ligon, S., Stampfl, J., Liska, R., & Krajnc, P. (2013). Hierarchically Porous Materials from Layer-by-Layer Photopolymerization of High Internal Phase Emulsions. Macromolecular Rapid Communications, 34, 938–943. http://hdl.handle.net/20.500.12708/155096 ( reposiTUm)
Li, Z., Ajami, A., Stankevicius, E., Husinsky, W., Račiukaitis, G., Stampfl, J., Liska, R., & Ovsianikov, A. (2013). 3D photografting with aromatic azides: A comparison between three-photon and two-photon case. Optical Materials. https://doi.org/10.1016/j.optmat.2013.04.007 ( reposiTUm)
Li, Z., Torgersen, J., Ajami, A., Mühleder, S., Qin, X., Husinsky, W., Holnthoner, W., Ovsianikov, A., Stampfl, J., & Liska, R. (2013). Initiation efficiency and cytotoxicity of novel water-soluble two-photon photoinitiators for direct 3D microfabrication of hydrogels. RSC Advances. https://doi.org/10.1039/c3ra42918k ( reposiTUm)
Ovsianikov, A., Li, Z., Ajami, A., Torgersen, J., Husinsky, W., Stampfl, J., & Liska, R. (2012). 3D grafting via three-photon induced photolysis of aromatic azides. Applied Physics A: Materials Science and Processing, 108(1), 29–34. https://doi.org/10.1007/s00339-012-6964-9 ( reposiTUm)
Ovsianikov, A., Li, Z., Torgersen, J., Stampfl, J., & Liska, R. (2012). Selective Functionalization of 3D Matrices Via Multiphoton Grafting and Subsequent Click Chemsitry. Advanced Functional Materials, 22(16), 3429–3433. https://doi.org/10.1002/adfm.201200419 ( reposiTUm)
Torgersen, J., Ovsianikov, A., Mironov, V., Pucher, N. U., Qin, X., Li, Z., Cicha, K., Machacek, T., Jantsch-Plunger, V., Liska, R., & Stampfl, J. (2012). Photo-sensitive hydrogels for threedimensional laser microfabrication in the presence of whole organisms. Journal of Biomedical Optics, 17(10), 1–10. http://hdl.handle.net/20.500.12708/164046 ( reposiTUm)
Ligon, S., Baudis, S., Nehl, F., Bergmeister, H., Nigisch, A., Stampfl, J., Liska, R., & Husar, B. (2012). Improved elastomeric materials for CAD/CAM generation of vascular structures in soft tissue replacement therapies. Journal of Tissue Engineering and Regenerative Medicine, 6(Supplement 1), 301. http://hdl.handle.net/20.500.12708/165077 ( reposiTUm)
Rezende, R. A., Pereira, F. D. A. S., Kasyanov, V., Ovsianikov, A., Torgersen, J., Gruber, P., Stampfl, J., Brakke, K., Nogueira, J. A., Mironov, V., & da Silva, J. V. L. (2012). Design, physical prototyping and initial characterisation of “lockyballs.” Virtual and Physical Prototyping, 7(4), 287–301. https://doi.org/10.1080/17452759.2012.740877 ( reposiTUm)
Monfared, A., Mitteramskogler, G., Gruber, S., Salisbury, J. K., Stampfl, J., & Blevins, N. H. (2012). High-Fidelity, Inexpensive Surgical Middle Ear Simulator. Otology and Neurotology, 33(9), 1573–1577. https://doi.org/10.1097/mao.0b013e31826dbca5 ( reposiTUm)
Mautner, A., Qin, X., Kapeller, B., Russmüller, G., Koch, T., Stampfl, J., & Liska, R. (2012). Efficient Curing of Vinyl Carbonates by Thiol-Ene Polymerization. Macromolecular Rapid Communications, 33(23), 2046–2052. http://hdl.handle.net/20.500.12708/164671 ( reposiTUm)
Mautner, A., Qin, X., Wutzel, H., Kapeller, B., Moser, D., Russmüller, G., Stampfl, J., & Liska, R. (2012). Thiol-Ene Photopolymerization for Efficient Curing of Vinyl Esters. Journal of Polymer Science Part A: Polymer Chemistry, 51(1), 203–212. http://hdl.handle.net/20.500.12708/164676 ( reposiTUm)
Cicha, K., Koch, T., Torgersen, J., Li, Z., Liska, R., & Stampfl, J. (2012). Young’s modulus measurement of two-photon polymerized micro-cantilevers by using nanoindentation equipment. Journal of Applied Physics, 112(9), 094906. https://doi.org/10.1063/1.4764330 ( reposiTUm)
Tesavibul, P., Felzmann, R., Gruber, S., Liska, R., Thompson, I., Boccaccini, A. R., & Stampfl, J. (2012). Processing of 45S5 Bioglass by lithography-based additive manufacturing. Materials Letters, 74, 81–84. https://doi.org/10.1016/j.matlet.2012.01.019 ( reposiTUm)
Felzmann, R., Gruber, S., Mitteramskogler, G., Tesavibul, P., Boccaccini, A., Liska, R., & Stampfl, J. (2012). Lithography-based Additive Manufacturing of Cellular Ceramic Structures. Advanced Engineering Materials, 14, 1052–1058. http://hdl.handle.net/20.500.12708/165005 ( reposiTUm)
Husar, B., Mautner, A., Heller, C., Schwentenwein, M., Varga, F., Koch, T., Macfelda, K., Russmüller, G., Stampfl, J., & Liska, R. (2012). Utilization of photopolymerization of new low toxic vinyl monomers in bone tissue engineering. Journal of Tissue Engineering and Regenerative Medicine, 6/SUPPLEMENT S1/, 370. http://hdl.handle.net/20.500.12708/164996 ( reposiTUm)
Ovsianikov, A., Mironov, V., Stampfl, J., & Liska, R. (2012). Engineering 3D cell-culture matrices: multiphoton processing technologies for biological and tissue engineering applications. Expert Review of Medical Devices, 9(6), 613–633. https://doi.org/10.1586/erd.12.48 ( reposiTUm)
Heller, C., Schwentenwein, M., Russmüller, G., Koch, T., Moser, D., Schopper, C., Varga, F., Stampfl, J., & Liska, R. (2011). Vinylcarbonates and Vinylcarbamates: Biocompatible Monomers for Radical Photopolymerization. Journal of Polymer Science Part A: Polymer Chemistry, 49(3), 650–661. http://hdl.handle.net/20.500.12708/161763 ( reposiTUm)
Kumpfmüller, J., Stadlmann, K., Satzinger, V., Li, Z., Stampfl, J., & Liska, R. (2011). Two-photon-induced Microfabrication of Flexible Optical Waveguides. Journal of Laser Micro Nanoengineering, 6(3), 195–198. https://doi.org/10.2961/jlmn.2011.03.0004 ( reposiTUm)
Li, Z., Siklos, M. I., Pucher, N. U., Cicha, K., Ajami, A., Husinsky, W., Rosspeintner, A., Vauthey, E., Gscheidt, G., Stampfl, J., & Liska, R. (2011). Synthesis and Structure-Activity Relationship of Several Aromatic Ketone-Based Two-Photon Initiators. Journal of Polymer Science Part A: Polymer Chemistry, 49(17), 3688–3699. https://doi.org/10.1002/pola.24806 ( reposiTUm)
Cicha, K., Li, Z., Stadlmann, K., Ovsianikov, A., Markut-Kohl, R., Liska, R., & Stampfl, J. (2011). Evaluation of 3D structures fabricated with two-photon-photopolymerization by using FTIR spectroscopy. Journal of Applied Physics, 110(6), 064911. https://doi.org/10.1063/1.3639304 ( reposiTUm)
Baudis, S., Nehl, F., Ligon, S. C., Nigisch, A., Bergmeister, H., Bernhard, D., Stampfl, J., & Liska, R. (2011). Elastomeric degradable biomaterials by photopolymerization-based CAD-CAM for vascular tissue engineering. Biomedical Materials, 6(5), 055003. https://doi.org/10.1088/1748-6041/6/5/055003 ( reposiTUm)
Husar, B., Heller, C., Schwentenwein, M., Mautner, A., Varga, F., Koch, T., Stampfl, J., & Liska, R. (2011). Biomaterials Based on Low Cytotoxic Vinyl Esters for Bone Replacement Application. Journal of Polymer Science Part A: Polymer Chemistry, 49, 4927–4934. http://hdl.handle.net/20.500.12708/162494 ( reposiTUm)
Baudis, S., Steyrer, B., Pulka, T., Wilhelm, H., Weigel, G., Bergmeister, H., Stampfl, J., & Liska, R. (2010). Photopolymerizable Elastomers for Vascular Tissue Regeneration. Macromolecular Symposia, 296(1), 121–126. https://doi.org/10.1002/masy.201051018 ( reposiTUm)
Rosenauer, M., Weber, E., Stampfl, J., & Vellekoop, M. J. (2010). Optofluidische Komponenten in der Flüssigkeitssensorik. Technisches Messen, 77(2), 89–94. https://doi.org/10.1524/teme.2010.0019 ( reposiTUm)
Luxner, M. H., Stampfl, J., & Pettermann, H. E. (2009). Nonlinear Simulations on the Interaction of Disorder and Defects in Open Cell Structures. Computational Materials Science, 47(2), 418–428. https://doi.org/10.1016/j.commatsci.2009.09.003 ( reposiTUm)
Pucher, N., Rosspeintner, A., Satzinger, V., Schmidt, V., Gescheidt, G., Stampfl, J., & Liska, R. (2009). Structure-Activity Relationship in D-π-A-π-D-Based Photoinitiators for the Two-Photon-Induced Photopolymerization Process. Macromolecules, 42(17), 6519–6528. https://doi.org/10.1021/ma9007785 ( reposiTUm)
Heller, C., Schwentenwein, M., Russmueller, G., Varga, F., Stampfl, J., & Liska, R. (2009). Vinyl Esters: Low Cytotoxicity Monomers for the Fabrication of Biocompatible 3D Scaffolds by Lithography Based Additive Manufacturing. Journal of Polymer Science Part A: Polymer Chemistry, 47(24), 6941–6954. https://doi.org/10.1002/pola.23734 ( reposiTUm)
Schuster, M., Turecek, C., Weigel, G., Saf, R., Stampfl, J., Varga, F., & Liska, R. (2009). Gelatin-Based Photopolymers for Bone Replacement Materials. Journal of Polymer Science Part A: Polymer Chemistry, 47(24), 7078–7089. https://doi.org/10.1002/pola.23747 ( reposiTUm)
Juras, V., Bittsansky, M., Majdisova, Z., Szomolanyi, P., Sulzbacher, I., Gäbler, S., Stampfl, J., Schüller, G., & Trattnig, S. (2009). In vitro determination of biomechanical properties of human articular cartilage in osteoarthritis using multi-parametric MRI. Journal of Magnetic Resonance, 197(1), 40–47. https://doi.org/10.1016/j.jmr.2008.11.019 ( reposiTUm)
Homa, J., Zellhofer, S., & Stampfl, J. (2009). Solid free form fabrication of silicon carbide cross flow filters. Journal of Ceramic Processing Research, 10(1), 25–32. http://hdl.handle.net/20.500.12708/165482 ( reposiTUm)
Baudis, S., Heller, C., Liska, R., Stampfl, J., Bergmeister, H., & Weigel, G. (2009). (Meth)acrylate-based photoelastomers as tailored biomaterials for artificial vascular grafts. Journal of Polymer Science Part A: Polymer Chemistry, 47(10), 2664–2676. https://doi.org/10.1002/pola.23352 ( reposiTUm)
Gäbler, S., Stampfl, J., Koch, T., Seidler, S., Schüller, G., Redl, H., Juras, V., Trattnig, S., & Weidisch, R. (2009). Determination of the viscoelastic properties of hydrogels based on polyethylene glycol diacrylate (PEG-DA) and human articular cartilage. International Journal of Materials Engineering Innovation, 1(1), 3–20. http://hdl.handle.net/20.500.12708/165406 ( reposiTUm)
LUXNER, M., WOESZ, A., STAMPFL, J., FRATZL, P., & PETTERMANN, H. (2009). A Finite Element Study on the Effects of Disorder in Cellular Structures. Acta Biomaterialia, 5(1), 381–390. https://doi.org/10.1016/j.actbio.2008.07.025 ( reposiTUm)
Jenni, M., Schimmer, L., Zauner, R., Stampfl, J., & Morris, J. (2008). Quantitative study of powder binder separation of feedstocks. Powder Injection Moulding International, 2(4), 50–55. http://hdl.handle.net/20.500.12708/170672 ( reposiTUm)
Stampfl, J., Baudis, S., Heller, C., Liska, R., Neumeister, A., Kling, R., Ostendorf, A., & Spitzbart, M. (2008). Photopolymers with tunable mechanical properties processed by laser based high-resolution stereolithography. Journal of Micromechanics and Microengineering, 18(12), 125014. https://doi.org/10.1088/0960-1317/18/12/125014 ( reposiTUm)
Stampfl, J., Baudis, S., Heller, C., Liska, R., Neumeister, A., KLING, R., Ostendorf, A., & Spitzbart, M. (2008). Photopolymers with tunable mechanical properties processed by laser-based high-resolution stereolithography. Journal of Micromechanics and Microengineering, 18(12), 125014. https://doi.org/10.1088/0960-1317/18/12/125014 ( reposiTUm)
Schuster, M., Turecek, C., Varga, F., Lichtenegger, H., Stampfl, J., & Liska, R. (2007). 3D-shaping of biodegradable photopolymers for hard tissue replacement. Applied Surface Science, 254(4), 1131–1134. https://doi.org/10.1016/j.apsusc.2007.07.182 ( reposiTUm)
Heller, C., Pucher, N., Seidl, B., Kalinyaprak-Icten, K., Ullrich, G., Kuna, L., Satzinger, V., Schmidt, V., Lichtenegger, H. C., Stampfl, J., & Liska, R. (2007). One- and two-photon activity of cross-conjugated photoinitiators with bathochromic shift. Journal of Polymer Science Part A: Polymer Chemistry, 45(15), 3280–3291. https://doi.org/10.1002/pola.22078 ( reposiTUm)
Schuster, M., Turecek, C., Mateos, A., Stampfl, J., Liska, R., & Varga, F. (2007). Evaluation of Biocompatible Photopolymers II: Further Reactive Diluents. Monatshefte Für Chemie - Chemical Monthly, 138(4), 261–268. https://doi.org/10.1007/s00706-007-0609-2 ( reposiTUm)
Schuster, M., Turecek, C., Kaiser, B., Stampfl, J., Liska, R., & Varga, F. (2007). Evaluation of Biocompatible Photopolymers I: Photoreactivity and Mechanical Properties of Reactive Diluents. Journal of Macromolecular Science Part A Pure and Applied Chemistry, 44(5), 547–557. https://doi.org/10.1080/10601320701235958 ( reposiTUm)
Infuehr, R., Pucher, N., Heller, C., Lichtenegger, H., Liska, R., Schmidt, V., Kuna, L., Haase, A., & Stampfl, J. (2007). Functional polymers by two-photon 3D lithography. Applied Surface Science, 254(4), 836–840. https://doi.org/10.1016/j.apsusc.2007.08.011 ( reposiTUm)
Luxner, M. H., Stampfl, J., & Pettermann, H. E. (2007). Numerical simulations of 3D open cell structures - Influence of structural irregularities on elasto-plasticity and deformation localization. International Journal of Solids and Structures, 44(9), 2990–3003. https://doi.org/10.1016/j.ijsolstr.2006.08.039 ( reposiTUm)
Liska, R., Schuster, M., Inführ, R., Turecek, C., Fritscher, C., Seidl, B., Schmidt, V., Kuna, L., Haase, A., Varga, F., Lichtenegger, H. C., & Stampfl, J. (2007). Photopolymers for rapid prototyping. Journal of Coatings Technology and Research, 4(4), 505–510. http://hdl.handle.net/20.500.12708/170095 ( reposiTUm)
Stampfl, J., Luxner, M., & Pettermann, H. E. (2006). Zellulare Werkstoffe mit frei wählbarer Zellgeometrie - Herstellung, Modellierung der mechanischen Eigenschaften und Anwendungen. Lignovisionen, 14, 55–60. http://hdl.handle.net/20.500.12708/174169 ( reposiTUm)
Turecek, C., Schuster, M., Varga, F., Liska, R., Kaiser, B., Stampfl, J., & Klaushofer, K. (2006). Evaluation and influence of photopolymers, capable for rapid prototyping on proliferation and morphologiy of osteoblasts. Calcified Tissue International and Musculoskeletal Research, 78, 71 P127. http://hdl.handle.net/20.500.12708/174159 ( reposiTUm)
Schuster, M., Inführ, R., Turecek, C., Stampfl, J., Varga, A., & Liska, R. (2006). Photopolymers for Rapid Prototyping of Soluble Mold Materials and Molding of Cellular Biomaterials. Monatshefte Für Chemie - Chemical Monthly, 137, 843–853. http://hdl.handle.net/20.500.12708/173146 ( reposiTUm)
Manjubala, I., Woesz, A., Pilz, I., Rumpler, M., Fratzl-Zelman, N., Roschger, P., Stampfl, J., & Fratzl, P. (2005). Biomimetic mineral-organic composite scaffolds with controlled internal architecture. Journal of Materials Science: Materials in Medicine, 16(12), 1111–1119. http://hdl.handle.net/20.500.12708/174070 ( reposiTUm)
Woesz, A., Rumpler, M., Stampfl, J., Varga, F., Fratzl-Zelman, N., Roschger, P., Fratzl, P., & Klaushofer, K. (2005). Towards bone replacement materials from calcium phosphates via rapid prototyping and ceramic gelcasting. Materials Science and Engineering: C, 25, 181–186. http://hdl.handle.net/20.500.12708/174069 ( reposiTUm)
Stampfl, J., & Liska, R. (2005). New materials for rapid prototyping applications. Macromolecular Chemistry and Physics, 206, 1253–1256. http://hdl.handle.net/20.500.12708/174068 ( reposiTUm)
Luxner, M. H., Stampfl, J., & Pettermann, H. E. (2005). Finite Element Modeling Concepts and Linear Analyses of 3D Regular Open Cell Structures. Journal of Materials Science, 40(22), 5859–5866. https://doi.org/10.1007/s10853-005-5020-y ( reposiTUm)
Liska, R., Schwager, F., Cano Vives, R., Maier, C., & Stampfl, J. (2005). Water-soluble photopolymers for rapid prototyping of cellular materials. Journal of Applied Polymer Science, 97, 2286–2298. http://hdl.handle.net/20.500.12708/174067 ( reposiTUm)

Beiträge in Tagungsbänden

Stampfl, J. (2024). 3D-printable Photopolymers: Optimizing Fracture Toughness and Thermomechanical Properties. In MecaNano 2nd General Meeting : Final Program. MecaNano 2nd General Meeting, Wien, Austria. https://doi.org/10.34726/6440 ( reposiTUm)
Fantoni, A., Ecker, J., Ahmadi, M., Koch, T., Stampfl, J., Liska, R., & Baudis, S. (2024). Sustainable Epoxy-methacrylate Interpenetrating Polymer Networks: Broadening the  Scope of High-performance Materials for Stereolithography. In Book of Abstracts ESPS 2024: 8th European Symposium of  Photopolymer Science (pp. 77–77). ( reposiTUm)
Mayer, F., Laa, D., Stampfl, J., Liska, R., & Ehrmann, K. (2024). Interpenetrating Polymer Networks for Hot Lithography 3D printing. In 2nd TCH Science Days: PhD & Postdoc Day: Book of Abstracts (pp. 45–45). ( reposiTUm)
Gurmann, T., Sinawehl, L., Zintl, M., Wolff, R., Koch, T., Stampfl, J., Liska, R., Slezak, P., Redl, H., & Baudis, S. (2024). Designed to Be Broken Down: Boronic Ester Photopolymers for Improved Degradation of 3D-Printed Scaffolds. In Abstract Book Advanced Functional Polymers for Medicine 2024 (pp. 42–42). http://hdl.handle.net/20.500.12708/204667 ( reposiTUm)
Gurmann, T., Sinawehl, L., Zintl, M., Wolff, R., Koch, T., Stampfl, J., Liska, R., Slezak, P., Redl, H., & Baudis, S. (2024). Photopolymers containing boronic esters for improved degradation of 3D-printed scaffolds. In 2nd TCH Science Days: PhD & Postdoc Day: Book of Abstracts (pp. 30–30). http://hdl.handle.net/20.500.12708/204668 ( reposiTUm)
Ehrmann, K., Göschl, M., Laa, D., Stampfl, J., & Liska, R. (2024). 3D printable crystalline photopolymer networks and their applications. In C. Slugovc (Ed.), Young Polymer Researchers Austria: Weiz, September 18-20, 2024: Book of Abstracts (pp. 11–11). https://doi.org/10.3217/r0qzf-8c869 ( reposiTUm)
Kojic, D., Ehrmann, K., Wolff, R., Mete, Y. D., Koch, T., Stampfl, J., Baudis, S., & Liska, R. (2023). 3D-Printing of Degradable Polyether-esters via Cationic Ring-Opening Polymerization of Spirocyclic Compounds. In RadTech Europe 2023 : Abstract Book (pp. 21–21). http://hdl.handle.net/20.500.12708/192340 ( reposiTUm)
Mete, Y. D., Wolff, R., Schandl, S., Kojic, D., Klikovits, N., Koch, T., Ehrmann, K., Knaack, P., Stampfl, J., & Liska, R. (2023). New Polymer Materials by Ionic and Catalytic Photopoly-Merization Using Hot Lithography. In Polymer Meeting 15 : Book of Abstracts (pp. 29–29). Polymer Institute of the Slovak Academy of Sciences. ( reposiTUm)
Ruppitsch, L. A., Egger, J., Ehrmann, K., Koch, T., Stampfl, J., & Liska, R. (2023). Supramolecular Upy-Interactions in Photopolymer Networks for Additive Manufacturing. In EUPOC 2023 - Dynamic Polymer Networks : Booklet of Abstracts (pp. 103–103). ( reposiTUm)
Pieringer, F., Ruppitsch, L. A., Ehrmann, K., Peer, G., Kury, M., Koch, T., Catel, Y., Stampfl, J., Moszner, N., & Liska, R. (2023). Cyclopolimerization as Versatile Tool in Photopolymerization Towards Low Shrinkage Behavior. In Polymer Meeting 15 : Book of Abstracts (pp. 188–188). Polymer Institute of the Slovak Academy of Sciences. http://hdl.handle.net/20.500.12708/192863 ( reposiTUm)
Ehrmann, K., Kojic, D., Schandl, S., Wolff, R., Koch, T., Stampfl, J., Eren Mert, T. N., Feist, F., Barner-Kowollik, C., & Liska, R. (2023). Non-Radical Chemistries for Lithographic 3D Printing. In RadTech Europe Conference and Exhibition 2023 : Abstract Book (pp. 20–20). https://doi.org/10.34726/5488 ( reposiTUm)
Kutsch, A. L., Baumgartner, B., & Stampfl, J. (2022). Lithography-based additive manufacturing of short fiber reinforced alumina. In Ceramics in Europe (pp. 474–474). http://hdl.handle.net/20.500.12708/142050 ( reposiTUm)
Stampfl, J. (2021). Fracture mechanical design of new photopolymers for Additive Manufacturing. In Polymer Meeting 14 (p. 54). Verlag der TU Graz. https://doi.org/10.3217/978-3-85125-844-8 ( reposiTUm)
Steindl, J., Ehrmann, K., Gorsche, C., Huang, C.-C., Koch, T., Steinbauer, P., Rohatschek, A., Andriotis, O. G., Thurner, P. J., Stampfl, J., & Liska, R. (2021). Maleimide-Styrene-Butadiene Terpolymers As Tough Photopolymers For Additive Manufacturing. In vESPS 2021 (p. 92). http://hdl.handle.net/20.500.12708/49586 ( reposiTUm)
Schandl, S., Ehrmann, K., Knaack, P., Stampfl, J., & Liska, R. (2021). Polycarbonates 3D-printed via Hot Lithography. In vESPS 2021 (p. 168). http://hdl.handle.net/20.500.12708/50820 ( reposiTUm)
Kojic, D., Mete, Y., Knaack, P., Ehrmann, K., Stampfl, J., & Liska, R. (2021). Expanding Spirocyclic Monomers For Hot Lithography Technology. In vESPS 2021 (p. 189). http://hdl.handle.net/20.500.12708/50818 ( reposiTUm)
Liska, R., & Stampfl, J. (2021). Hot Lithography: The Bright Fututre of Cationic Photopolymerization. In vESPS 2021 (p. 51). http://hdl.handle.net/20.500.12708/50819 ( reposiTUm)
Berg, A., Koch, B., Hochwallner, A., Stampfl, J., Grasl, C., & Moscato, F. (2021). Magnetic resonance microscopy for the non-destructive analysis of polymer micro structures produced using additive manufacturing. In Microscopy Conference 2021 (pp. 413–414). http://hdl.handle.net/20.500.12708/50816 ( reposiTUm)
Stampfl, J. (2020). Fracture mechanical aspects related to the lithography based additive manufacturing of metals, ceramics and polymers. In Metal Additive Manufacturing Conference. 5th Metal Additive Manufacturing Conference 2020, Leoben, Austria. http://hdl.handle.net/20.500.12708/68178 ( reposiTUm)
Steinbauer, P., Orman, S., Hofstetter, C., Schwentenwein, M., Russmüller, G., Stampfl, J., Liska, R., & Baudis, S. (2020). Patient-specific biocompatible polymer scaffolds for bone tissue regeneration. In 2020 TERMIS EU Abstracts (p. 308). e Cells und Materials. http://hdl.handle.net/20.500.12708/50786 ( reposiTUm)
Steinbauer, P., Orman, S., Hofstetter, C., Schwentenwein, M., Russmüller, G., Stampfl, J., Liska, R., & Baudis, S. (2020). Biocompatible photopolymer scaffolds tailored for patient specific solutions for bone tissue regeneration. In 11th World Biomaterials Congress (p. 1). http://hdl.handle.net/20.500.12708/49621 ( reposiTUm)
Reichsöllner, R., Orman, S., Hofstetter, C., Schwentenwein, M., Russmüller, G., Stampfl, J., Liska, R., & Baudis, S. (2019). 3D-printed, tough and biocompatible photopolymers for in vivo bone tissue regeneration. In Termis EU 2019 (p. 1625). http://hdl.handle.net/20.500.12708/50483 ( reposiTUm)
Kury, M., Peer, G., Seidler, K., Gorsche, C., Gauss, P., Koch, T., Dorfinger, P., Stampfl, J., & Liska, R. (2019). Toughening photoploymers by means of addition-fragmentation chain transfer reagents for 3D printing. In European Polymer Congress 2019 (EPF 2019) (p. 762). http://hdl.handle.net/20.500.12708/50486 ( reposiTUm)
Rath, T., Steyrer, B., Addison, R., Holzhausen, E., & Stampfl, J. (2019). Developing a new Substitute for Ivory using Lithography-based Additive Manufacturing. In H. A. Krebs (Ed.), VSS Vienna young Scientists Symposium (pp. 154–155). http://hdl.handle.net/20.500.12708/68067 ( reposiTUm)
Stampfl, J., Kollmer, J., & Mitteramskogler, G. (2018). Lithographiebasierte Additive Fertigung: Werkstoffe - Anwendungen - Zukunftstrends. In W. Kern (Ed.), Print&Coat: Polymere in Druck- und Beschichtungstechnologien (pp. 13–18). http://hdl.handle.net/20.500.12708/67821 ( reposiTUm)
Baumgartner, S., & Stampfl, J. (2018). Digital Materials: A Hybrid 3d-Printing System. In Proceedings VSS 2018 (pp. 78–79). http://hdl.handle.net/20.500.12708/67807 ( reposiTUm)
Stampfl, J. (2018). Schlagzähe Photopolymere für die lithographiebasierte Additive Fertigung. In B. Langer, P. Michel, & R. Lach (Eds.), Internationale wissenschaftliche Tagung Polymerwerkstoffe (pp. 75–76). Selbstverlag Hochschule Merseburg. http://hdl.handle.net/20.500.12708/67820 ( reposiTUm)
Mete, Y., Grunenberg, D., Steyrer, B., Stampfl, J., Gorsche, C., & Liska, R. (2018). A Heterotelechelic Oligomer for Tough Photopolymersvia Hot Lithography. In 5th European Symposium of Photopolymer Science (p. P26). 5th European Symposium of Photopolymer Science. http://hdl.handle.net/20.500.12708/50287 ( reposiTUm)
Busetti, B., Lutzer, B., & Stampfl, J. (2018). Development of a hybrid exposure system for lithography-based additive manufacturing technologies. In SPIE Proceedings Vol. 10523: Laser 3D Manufacturing V (pp. 1–13). SPIE Digital Library. http://hdl.handle.net/20.500.12708/67788 ( reposiTUm)
Baumgartner, S., Busetti, B., Pfaffinger, M., & Stampfl, J. (2018). Comparison of dynamic mask- and vector-based ceramic stereolithography. In Proceedings of the 41st International Conference on Advanced Ceramics and Composites (p. 9). Ceramic Engineering and Science Proceedings/ Wiley. http://hdl.handle.net/20.500.12708/67700 ( reposiTUm)
Hartmann, M., Pfaffinger, M., & Stampfl, J. (2018). Lithography-Based Ceramic Manufacturing (LCM) for Dental Applications. In Advanced Manufacturing and Materials (pp. 95–103). Scientific.Net. https://doi.org/10.4028/www.scientific.net/msf.939.95 ( reposiTUm)
Stanic, S. D., Altun, A. A., Reicharlzeder, D., Schwentenwein, M., Baudis, S., Stampfl, J., & Liska, R. (2017). Highly Filled Hydrogels as Biocomposites and Ceramic Precursors for 3D Printing Aplications. In Danube Vltava Sava Polymer Meeting 2017 (p. PO-24). Book of Abstracts.com. http://hdl.handle.net/20.500.12708/49897 ( reposiTUm)
Baudis, S., Zerobin, E., Lunzer, M., Tomasikova, Z., Qin, X., Markovic, M., Gruber, P., Stampfl, J., Ovsianikov, A., & Liska, R. (2017). Microfabricated Biocompatible Hydrogels. In VSS 2017 (p. 11). http://hdl.handle.net/20.500.12708/49862 ( reposiTUm)
Liske, O., Dorfinger, P., Gmeiner, R., Baudis, S., Stampfl, J., Liska, R., & Knaus, S. (2017). UV Curable Materials from Tailored Lignin (Meth)Acrylates. In Danube Vltava Sava Polymer Meeting 2017 (p. PO-19). Book of Abstracts.com. http://hdl.handle.net/20.500.12708/49896 ( reposiTUm)
Orman, S., Gorsche, C., Hofstetter, C., Baudis, S., Stampfl, J., & Liska, R. (2017). Photorheometer with RT-FTIR Coupling as Innovativ Tool to Assess Photopolymers for 3D Printing. In Danube Vltava Sava Polymer Meeting 2017 (p. PO 44). Book of Abstracts. http://hdl.handle.net/20.500.12708/49893 ( reposiTUm)
Baudis, S., Ovsianikov, A., Stampfl, J., & Liska, R. (2017). 3D Printed Biocompatible Polymers. In Danube Vltava Sava Polymer Meeting 2017 (p. OP-30). Book of Abstracts.com. http://hdl.handle.net/20.500.12708/49912 ( reposiTUm)
Zerobin, E., Tromayer, M., Gruber, P., Markovic, M., Baudis, S., Stampfl, J., Ovsianikov, A., & Liska, R. (2017). Two-Photon Initiator Development and Hydrogel Networks Based on Hyaluronic Acid. In Danube Vltava Sava Polymer Meeting 2017 (p. OP-32). Book of Abstracts.com. http://hdl.handle.net/20.500.12708/49913 ( reposiTUm)
Kury, M., Seidler, K., Gauss, P., Dorfinger, P., Koch, T., Stampfl, J., Gorsche, C., & Liska, R. (2017). Modification of (Meth)Acrylate-Based Photopolymer Networks Using Addition-Fragmentation Chain Transfer Reagents. In Danube Vltava Sava Polymer Meeting 2017 (p. OP-90). Book of Abstracts.com. http://hdl.handle.net/20.500.12708/49921 ( reposiTUm)
Baudis, S., Zerobin, E., Lunzer, M., Tromayer, M., Markovic, M., Gruber, P., Stampfl, J., Ovsianikov, A., & Liska, R. (2017). Macromolecular Photochemistry: A Toolbox to Control the Micro-Environment of Cells. In 17. Österreichische Chemietage 2017 (p. OP-29). http://hdl.handle.net/20.500.12708/49925 ( reposiTUm)
Steyrer, B., Liska, R., & Stampfl, J. (2017). Thermoplasts as Toughening Agent for 3D-Printable Photopolymers. In Danube Vltava Sava Polymer Meeting 2017 DVSPM (p. OP-4). Book-of-Abstracts.com. http://hdl.handle.net/20.500.12708/67648 ( reposiTUm)
Kollmer, J., Dorfinger, P., Mitteramskogler, G., & Stampfl, J. (2017). Nichtmetallische Hochleistungswerkstoffe für die lithographiebasierte additive Fertigung. In Rapid.Tech - International Trade Show & Conference for Additive Manufacturing (p. 10). http://hdl.handle.net/20.500.12708/67729 ( reposiTUm)
Liske, O., Dorfinger, P., Gmeiner, R., Baudis, S., Stampfl, J., Liska, R., & Knaus, S. (2017). UV curable materials for 3D printing based on renewable resources. In RadTech Europe Conference & Exhibition 2017 (p. 71). http://hdl.handle.net/20.500.12708/49946 ( reposiTUm)
Kury, M., Seidler, K., Dorfinger, P., Koch, T., Stampfl, J., Gorsche, C., & Liska, R. (2017). Toughening of photopolymer Networks using Addition-fragmentation chain transfer Reagents. In Rad Tech Europe Conference & Exhibition 2017 (p. 13). http://hdl.handle.net/20.500.12708/49954 ( reposiTUm)
Zerobin, E., Tromayer, M., Gruber, P., Markovic, M., Baudis, S., Stampfl, J., Ovsianikov, A., & Liska, R. (2017). Newly Developed Hydrogel Precursors and Two-Photon Initiators Based on Hyaluronic Acid. In AMBA 2017, Advanced Materials for Biomedical Applications (p. 62). http://hdl.handle.net/20.500.12708/49908 ( reposiTUm)
Gorsche, C., Seidler, K., Kury, M., Steindl, J., Dorfinger, P., Stampfl, J., Moszner, N., & Liska, R. (2017). The power of chain transfer in the field of photopolymer applications. In Advanced Polymers via Macromolecular Engineering (p. 143). Advanced Polymers via Macromolecular Engineering. http://hdl.handle.net/20.500.12708/49796 ( reposiTUm)
Liske, O., Dorfinger, P., Gmeiner, R., Baudis, S., Stampfl, J., Liska, R., & Knaus, S. (2017). Modification of Wheat Straw Soda Lignin for Light-Induced Radical Polymerization Process. In Bypos Workshop Book 2017 (p. 55). http://hdl.handle.net/20.500.12708/49859 ( reposiTUm)
Baudis, S., Zerobin, E., Lunzer, M., Tromayer, M., Markovic, M., Gruber, P., Stampfl, J., Ovsianikov, A., & Liska, R. (2017). Controlling the Micro-Environment of Cells by Exploitation of Macromolecular Photochemistry. In Advanced Polymers via Macromolecular Engineering (p. 91). http://hdl.handle.net/20.500.12708/49811 ( reposiTUm)
Seidler, K., Gauss, P., Kury, M., Harakaly, G., Griesser, M., Koch, T., Stampfl, J., Gorsche, C., Moszner, N., & Liska, R. (2017). Tough and low shrinkage photopolymers. In European Coatings Journal 04-2017 (p. 96). Vincentz Network GmbH & Co. KG, Hannover (Deutschland). http://hdl.handle.net/20.500.12708/49773 ( reposiTUm)
Orman, S., Gorsche, C., Hofstetter, C., Baudis, S., Stampfl, J., & Liska, R. (2017). Biocompatible Photopolymers with Improved Impact Resistance for Additive Manufacturing. In Bypos Workshop Book 2017 (p. 53). http://hdl.handle.net/20.500.12708/49860 ( reposiTUm)
Zerobin, E., Baudis, S., Tomasikova, Z., Qin, X., Markovic, M., Gruber, P., Stampfl, J., Ovsianikov, A., & Liska, R. (2016). Micro fabrication of hydrogels based on hyaluronic acid. In BYPoS Workshop book (p. 107). book of abstracts. http://hdl.handle.net/20.500.12708/49264 ( reposiTUm)
Harakaly, G., Gorsche, C., Seidler, K., Reghunathan, H., Dorfinger, P., Koch, T., Stampfl, J., Moszner, N., & Liska, R. (2016). Formation of tough photopolymer networks using addition fragmentation chain transfer: A viable concept for lithography based 3D printing. In ESPS 2016 (p. P-55). http://hdl.handle.net/20.500.12708/49358 ( reposiTUm)
Tromayer, M., Markovic, M., Gruber, P., Hölzl, K., Steiger, W., Naumov, S., Scherzer, T., Stampfl, J., Ovsianikov, A., & Liska, R. (2016). Novel Two-Photon Initiators Based on Cleavable Diazosulfones. In ESPS 2016 (p. P-21). http://hdl.handle.net/20.500.12708/49349 ( reposiTUm)
Zerobin, E., Baudis, S., Tomasikova, Z., Qin, X., Markovic, M., Gruber, P., Stampfl, J., Ovsianikov, A., & Liska, R. (2016). High Resolved Biocompatible Hydrogel Constructs based on Hyaluronic Acid. In ESPS 2016 (p. P-34). http://hdl.handle.net/20.500.12708/49356 ( reposiTUm)
Gauss, P., Seidler, K., Reghunathan, H., Kury, M., Svirkova, A., Marchetti-Deschmann, M., Dorfinger, P., Koch, T., Stampfl, J., Moszner, N., Gorsche, C., & Liska, R. (2016). Tailored Photopolymer Networks Using Addition Fragmentation Chain Transfer. In BIMac 2016 Programme Book and Book of Abstracts (p. 12). http://hdl.handle.net/20.500.12708/49377 ( reposiTUm)
Dorfinger, P. (2016). Toughening of Photopolymers with Core-Shell Particles for Stereolithography. In P. Dorfinger, R. Liska, & J. Stampfl (Eds.), 4th European Symposium of Photopolymer Science ESPS 2016 (p. P49). http://hdl.handle.net/20.500.12708/67501 ( reposiTUm)
Baumgartner, S., Pfaffinger, M., & Stampfl, J. (2016). Lithography based additive manufacturing of structural and functional ceramics. In From Lab to Fab - Abstracts Lectures&Posters (p. 49). http://hdl.handle.net/20.500.12708/67480 ( reposiTUm)
Baumgartner, S., Schönherr, J.-A., Schedle, A., & Stampfl, J. (2016). Precision of Stereolithography-based additive manufactured ceramic parts. In 6th International Conference on Additive Technologies iCAT 2016 (pp. 412–414). http://hdl.handle.net/20.500.12708/67479 ( reposiTUm)
Tromayer, M., Markovic, M., Gruber, P., Hölzl, K., Vlierberghe, S. V., Dubruel, P., Stampfl, J., Ovsianikov, A., & Liska, R. (2016). Biocompatible Two-Photon Initiator with Hyaluronan Backbone. In ESPS 2016 (p. P-37). http://hdl.handle.net/20.500.12708/49345 ( reposiTUm)
Gorsche, C., Seidler, K., Reghunathan, H., Gauss, P., Kury, M., Dorfinger, P., Koch, T., Stampfl, J., Moszner, N., & Liska, R. (2016). Addition fragmentation chain transfer: Enriching the field of photopolymer applications. In ESPS 2016 (p. O-7). http://hdl.handle.net/20.500.12708/49366 ( reposiTUm)
Stampfl, J., Dorfinger, P., Gmeiner, R., & Liska, R. (2016). Materials development for lithography-based 3D-printing. In Macromolecular Chemistry and Physics (p. 90). Wiley-VCH. http://hdl.handle.net/20.500.12708/67384 ( reposiTUm)
Baudis, S., Tomasikova, Z., Zerobin, E., Qin, X., Markovic, M., Gruber, P., Stampfl, J., Ovsianikov, A., & Liska, R. (2016). Laser-microfabricated, biocompatible hydrogels based on hyaluronan. In European Cells&Materials Journal (p. 454). European Cells&Materials Journal. http://hdl.handle.net/20.500.12708/49305 ( reposiTUm)
Lunzer, M., Ossipov, D., Hilborn, J., Gruber, P., Hölzl, K., Markovic, M., Tromayer, M., Stampfl, J., Liska, R., & Ovsianikov, A. (2016). Promoted two-photon induced cleavage of o-nitrobenzyl linkages in a hyaluronic acid based hydrogel by a two-photon initiator. In TERMIS-EU 2016 Conference (p. 42). European Cells&Materials Journal. http://hdl.handle.net/20.500.12708/49319 ( reposiTUm)
Tromayer, M., Markovic, M., Gruber, P., Hölzl, K., Vlierberghe, P. V., Dubruel, P., Stampfl, J., Ovsianikov, A., & Liska, R. (2016). Novel biocompatible two-photon initiator based on hyaluronan. In TERMIS-EU 2016 conference (p. 481). European Cells&Materials Journal. http://hdl.handle.net/20.500.12708/49320 ( reposiTUm)
Tromayer, M., Gruber, P., Hölzl, K., Markovic, M., Vlierberghe, S. V., Ovsianikov, A., Dubruel, P., Stampfl, J., & Liska, R. (2016). Hyaluronan-Based Two-Photon Initiator with Enhanced Biocompatibility. In Book of Abstracts (p. 1807). http://hdl.handle.net/20.500.12708/49321 ( reposiTUm)
Lunzer, M., Ossipov, D., Hilborn, J., Gruber, P., Hölzl, K., Markovic, M., Stampfl, J., Liska, R., & Ovsianikov, A. (2016). Two-photon degradation of a hyaluronic acid based hydrogel using a two-photon initiator as photosensitizer. In Frontiers in Bioengineering and Biotechnology. 10th World Biomaterials Congress, Montreal, Canada. Conference Abstract: 10th World Biomaterials Congress/Frontiers. https://doi.org/10.3389/conf.fbioe.2016.01.02498 ( reposiTUm)
Baudis, S., Tomasikova, Z., Zerobin, E., Qin, X., Gruber, P., Markovic, M., Stampfl, J., Ovsianikov, A., & Liska, R. (2016). Additive Manufactured, Biocompatible Hydrogels based on Hyaluronic Acid. In Book of Abstracts (p. 2728). http://hdl.handle.net/20.500.12708/49322 ( reposiTUm)
Baudis, S., Bomze, D., Lunzer, M., Stampfl, J., Ovsianikov, A., & Liska, R. (2016). Poly(vinyl alcohol) based hydrogels for 3D biomaterial constructs. In Book of Abstracts (p. 2693). http://hdl.handle.net/20.500.12708/49323 ( reposiTUm)
Pfaffinger, M., Mitteramskogler, G., Gmeiner, R., & Stampfl, J. (2015). Thermal Debinding of Ceramic-Filled Photopolymers. In C. Edtmaier & G. Requena (Eds.), 20th Symposium on Composites (pp. 75–81). Materials Science Forum. https://doi.org/10.4028/www.scientific.net/msf.825-826.75 ( reposiTUm)
Dorfinger, P., Liska, R., & Stampfl, J. (2015). Toughening of Photopolymers for Stereolithography (SL). In 20th Symposium on Composites (pp. 53–59). Materials Science Forum. https://doi.org/10.4028/www.scientific.net/msf.825-826.53 ( reposiTUm)
Gorsche, C., Ovsianikov, A., Stampfl, J., & Liska, R. (2015). Photopolymerization: providing A triangle for material design, Biomaterials, and 3D printing. In Book of Abstracts (pp. 138–139). Richard Zemann. http://hdl.handle.net/20.500.12708/49033 ( reposiTUm)
Stampfl, J. (2015). 3D-printing of ceramics: Translation to industrial processes. In J. M. Torralba (Ed.), Advances in Material & Processing Technologies (p. 202). http://hdl.handle.net/20.500.12708/67307 ( reposiTUm)
Grunenberg, D., Gorsche, C., Griesser, M., Koch, T., Dorfinger, P., Stampfl, J., Moszner, N., & Liska, R. (2015). Tough Dimethacrylate Networks with Low Shrinkage Stress: Benefiting from β-Allyl Sulfones as Addition-Fragmentation Chain Transfer Agents. In Book of Abstracts. BPS 2015, Bayreuth, Germany. http://hdl.handle.net/20.500.12708/49032 ( reposiTUm)
Harakaly, G., Seidler, K., Griesser, M., Gorsche, C., Stampfl, J., & Liska, R. (2015). α-Sulfonoxy acrylate chain transfer agents for 3D printing of tough photopolymers. In Abstract Book (p. 85). http://hdl.handle.net/20.500.12708/49059 ( reposiTUm)
Gauss, P., Gorsche, C., Griesser, M., Koch, T., Stampfl, J., Moszner, N., & Liska, R. (2015). Basic Investigation of Addition Fragmentation Chain Transfer Agents in Photopolymerization of Methacrylic Monomers. In Abstract Book (p. 16). http://hdl.handle.net/20.500.12708/49064 ( reposiTUm)
Orman, S., Potzmann, P., Samusjew, A., Husar, B., Schwentenwein, M., Koch, T., Stampfl, J., & Liska, R. (2015). Photopolymerization Of Biocompatible Composites. In Abstract USB. Photopolymerization Fundamentals 2015, Boulder, United States of America (the). http://hdl.handle.net/20.500.12708/49036 ( reposiTUm)
Baudis, S., Tomasikova, Z., Knaack, P., Qin, X., Stampfl, J., Ovsianikov, A., & Liska, R. (2015). A Thiol-Ene based Modular Material System with Hyaluronic Acid Building Blocks. In Abstract USB. Photopolymerization Fundamentals 2015, Boulder, United States of America (the). http://hdl.handle.net/20.500.12708/49038 ( reposiTUm)
Gorsche, C., Seidler, K., Gauss, P., Harakaly, G., Griesser, M., Koch, T., Stampfl, J., Moszner, N., & Liska, R. (2015). Tough And Low Shrinkage Photopolymers For 3d-Printing. In Abstract USB. Photopolymerization Fundamentals 2015, Boulder, United States of America (the). http://hdl.handle.net/20.500.12708/49043 ( reposiTUm)
Gorsche, C., Stampfl, J., & Liska, R. (2015). Photopolymerization: A powerful technique for the fabrication and 3D printing of biomaterials. In Abstracts. ISBPPB 2015, Orlando, United States of America (the). http://hdl.handle.net/20.500.12708/49044 ( reposiTUm)
Stampfl, J., Homa, J., & Liska, R. (2015). Lithography based Additive Manufacturing - Materials and Processes. In The 6th International Conference on Nanoscience & Technology (p. 179). http://hdl.handle.net/20.500.12708/67240 ( reposiTUm)
Gmeiner, R., Mitteramskogler, G., Pfaffinger, M., Schönherr, J.-A., Ebert, J., Laubersheimer, J., & Stampfl, J. (2014). Lithography-Based Additive Manufacturing of High Performance Ceramics. In 3rd European Symposium of Photopolymer Science (p. OP-49). Book-of-Abstracts.com. http://hdl.handle.net/20.500.12708/67063 ( reposiTUm)
Gruber, P., Markovic, M., Hölzl, K., Tromayer, M., Van Vlierberghe, S., Dubruel, P., Liska, R., Stampfl, J., & Ovsianikov, A. (2014). Laser Photofabrication of Cell-Containing Hydrogel Constructs. In 3rd European Symposium of Photopolymer Science (p. 167). http://hdl.handle.net/20.500.12708/67062 ( reposiTUm)
Orman, S., Samusjew, A., Husar, B., Koch, T., Stampfl, J., & Liska, R. (2014). Application Of Thiol-Ene Click Chemistry For Potential Bone Replacement Materials. In 3rd European Symposium of Photopolymer Science (p. 196). http://hdl.handle.net/20.500.12708/48665 ( reposiTUm)
Tomasikova, Z., Qin, X., Husar, B., Gruber, P., Plochberger, B., Markovic, M., Ovsianikov, A., Stampfl, J., & Liska, R. (2014). Hyaluronic Acid-Based Hydrogels For Two-Photon Polymerisation Applications. In 3rd European Symposium of Photopolymer Science (p. 219). http://hdl.handle.net/20.500.12708/48668 ( reposiTUm)
Tromayer, M., Gruber, P., Ajami, A., Rosspeintner, A., Naumov, S., Ovsianikov, A., Stampfl, J., & Liska, R. (2014). Synthesis And Characterization Of Aminostyryl-1,3,5-Triazines As Initiators For Two-Photon Induced Polymerization. In 3rd European Symposium of Photopolymer Science (p. 220). http://hdl.handle.net/20.500.12708/48669 ( reposiTUm)
Gorsche, C., Koch, T., Moszner, N., Stampfl, J., & Liska, R. (2014). Allyl Sulfone / Dimethacrylate Networks: Homogeneous And Tough Photopolymer Networks For Biomedical Applications. In 3rd European Symposium of Photopolymer Science (p. 73). http://hdl.handle.net/20.500.12708/48672 ( reposiTUm)
Qin, X., Tomasikova, Z., Gruber, P., Plochberger, B., Markovic, M., Ovsianikov, A., Stampfl, J., & Liska, R. (2014). Two-Photon Microfabrication Of Biomimetic Hydrogel Constructs For Tissue Regeneration. In 3rd European Symposium of Photopolymer Science (p. 129). http://hdl.handle.net/20.500.12708/48677 ( reposiTUm)
Mautner, A., Ligon, S., Husar, B., Koch, T., Stampfl, J., & Liska, R. (2014). Vinyl Esters With Improved Reactivity And Toughness. In A. Mautner, S. Ligon, B. Husar, T. Koch, J. Stampfl, & R. Liska (Eds.), 3rd European Symposium of Photopolymer Science (p. 71). http://hdl.handle.net/20.500.12708/48676 ( reposiTUm)
Gruber, P., Markovic, M., Hölzl, K., Tromayer, M., Van Vlierberghe, S., Dubruel, P., Liska, R., Stampfl, J., & Ovsianikov, A. (2014). Laser photofabrication of 3D cell-containing hydrogel constructs. In 2014 Tissue Engineering and Regenerative Medicine International Society-Asia Pacific Meeting (TERMIS-AP 2014). 2014 Tissue Engineering and Regenerative Medicine International Society-Asia Pacific Meeting (TERMIS-AP 2014), Daegu, Korea (the Republic of). http://hdl.handle.net/20.500.12708/67110 ( reposiTUm)
Dorfinger, P., Stampfl, J., & Liska, R. (2014). Toughening Of Photopolymers For Stereolithography (sl). In 3rd European Symposium of Photopolymer Science (pp. 25–26). ESPS 2014. http://hdl.handle.net/20.500.12708/67056 ( reposiTUm)
Stampfl, J. (2014). Lithography-based Additive Manufacturing of high-performance ceramics. In Meet the future of industrial manufacturing now (p. 22). http://hdl.handle.net/20.500.12708/67059 ( reposiTUm)
Gruber, P., Markovic, M., Hölzl, K., Tromayer, M., Van Vlierberghe, S., Dubruel, P., Liska, R., Stampfl, J., & Ovsianikov, A. (2014). Laser Photofabrication of Cell-Containing Hydrogel Constructs. In LPM 2014 Program & Technical Digest (p. 263). http://hdl.handle.net/20.500.12708/48680 ( reposiTUm)
Tomasikova, Z., Qin, X., Husar, B., Gruber, P., Plochberger, B., Markovic, M., Ovsianikov, A., Stampfl, J., & Liska, R. (2014). Two-photon polymerisation of hyaluronic acid-based hydrogels for tissue engineering. In BYPoS workshop book (p. 91). book of abstracts. http://hdl.handle.net/20.500.12708/48705 ( reposiTUm)
Gruber, P., Markovic, M., Hölzl, K., Tromayer, M., Van Vlierberghe, S., Dubruel, P., Liska, R., Stampfl, J., & Ovsianikov, A. (2014). Laser photofabrication of 3D cell-containing hydrogel constructs. In International Conference on Biofabrication. ICB 2014, Pohang, Korea (the Republic of). http://hdl.handle.net/20.500.12708/67111 ( reposiTUm)
Stampfl, J., & Torgersen, J. (2013). Two Photon Lithography for the Three-dimensional Micro-fabrication of Extracellular Environments. In SME Medical Manufacturing Innovations Eventbrochure (p. 7). http://hdl.handle.net/20.500.12708/66764 ( reposiTUm)
Stampfl, J. (2013). Functional photopolymers for two-photon-lithography. In W. Kautek (Ed.), 5th European Conference on Applications of Femtosecond Lasers in Materials Science (p. 20). http://hdl.handle.net/20.500.12708/66778 ( reposiTUm)
Ovsianikov, A., Haslinger, K., Qin, X., Li, Z., Gruber, P., Torgersen, J., Van Vlierberghe, S., Dubruel, P., Liska, R., & Stampfl, J. (2013). Laser microfabrication of 3D CAD structures from photosensitive hydrogel precursors. In ICMAT 2013 - 7th International Conference on Materials for Advanced Technologies (p. 218). http://hdl.handle.net/20.500.12708/66935 ( reposiTUm)
Tromayer, M., Mautner, A., Husar, B., Heller, C., Varga, F., Koch, T., Macfelda, K., Russmüller, G., Stampfl, J., & Liska, R. (2013). Vinyl carbonates with improved mechanical properties. In Abstract Book (p. 120). http://hdl.handle.net/20.500.12708/48293 ( reposiTUm)
Potzmann, P., Qin, X., Pucher, N. U., Torgersen, J., Mühleder, S., Holnthoner, W., Redl, H., Stampfl, J., Ovsianikov, A., & Liska, R. (2013). Micrometer-scale precise 3D hydrogel scaffolds prepared by two-photon polymerization. In Book of Abstracts. Photopolymerization Fundamentals 2013, Jackson Hole, Non-EU. http://hdl.handle.net/20.500.12708/48300 ( reposiTUm)
Potzmann, P., Qin, X., Pucher, N. U., Torgersen, J., Mühleder, S., Holnthoner, W., Redl, H., Stampfl, J., Ovsianikov, A., & Liska, R. (2013). High-precision manufacturing of 3D hydrogel scaffolds via two-photon polymerization. In Abstract Book (p. 117). http://hdl.handle.net/20.500.12708/48296 ( reposiTUm)
Potzmann, R., Qin, X., Mühleder, S., Holnthoner, W., Redl, H., Stampfl, J., Ovsianikov, A., & Liska, R. (2013). Hyaluron vinyl esters as novel precursors for photocurable hydrogels. In Book of Abstracts. Photopolymerization Fundamentals 2013, Jackson Hole, Non-EU. http://hdl.handle.net/20.500.12708/48301 ( reposiTUm)
Potzmann, P., Qin, X., Mühleder, S., Holnthoner, W., Redl, H., Stampfl, J., Ovsianikov, A., & Liska, R. (2013). Development of a novel photocurable hydrogel precursor. In Abstract Book (p. 121). http://hdl.handle.net/20.500.12708/48297 ( reposiTUm)
Qin, X., Mühleder, S., Torgersen, J., Ovsianikov, A., Redl, H., Stampfl, J., & Liska, R. (2013). 3D construction of artifical ECM hydrogels by two-photon-induced polymerization. In Advances in Tissue Regeneration 2013. Advances in Tissue Regeneration 2013, Lattrop, EU. http://hdl.handle.net/20.500.12708/48371 ( reposiTUm)
Qin, X., Torgersen, J., Mühleder, S., Holnthoner, W., Ovsianikov, A., Stampfl, J., Redl, H., & Liska, R. (2013). Two-photon microfabrication of artificial ECM hydrogel via thiol-ene chemistry. In D. Eglin, M. D´Este, & D. Schraner (Eds.), Program & Abstract (p. 19). http://hdl.handle.net/20.500.12708/48186 ( reposiTUm)
Qin, X., Husar, B., Torgersen, J., Mühleder, S., Holnthoner, W., Redl, H., Stampfl, J., Ovsianikov, A., & Liska, R. (2013). Biodegradable 3D Hydrogels Scaffold by Two-Photon Polymerization. In Book of contributions. 25th European Conference on Biomaterials, Madrid, EU. http://hdl.handle.net/20.500.12708/48188 ( reposiTUm)
Husar, B., Mautner, A., Heller, C., Varga, F., Koch, T., Macfelda, K., Russmüller, G., Stampfl, J., & Liska, R. (2013). Vinyl Carbonates and Vinyl Esters: From Synthesis to In Vivo Testing of Bone Replacement Material. In Book of contributions. 25th European Conference on Biomaterials, Madrid, EU. http://hdl.handle.net/20.500.12708/48187 ( reposiTUm)
Husar, B., Mautner, A., Heller, C., Esfandiari, P., Varga, F., Stampfl, J., & Liska, R. (2013). Low toxic alternatives to (meth)acrylates: Vinyl esters, vinyl carbonates, and vinyl carbamates. In Guide Book. RadTech Asia 2013, Shanghai, Non-EU. http://hdl.handle.net/20.500.12708/48199 ( reposiTUm)
Qin, X., Husar, B., Torgersen, J., Mühleder, S., Holnthoner, W., Redl, H., Stampfl, J., Ovsianikov, A., & Liska, R. (2013). Gelatin/Albumin-Based Hydrogels Scaffolds By Two-Photon Polymerization. In Abstracts (p. 195). http://hdl.handle.net/20.500.12708/48201 ( reposiTUm)
Husar, B., Mautner, A., Heller, C., Varga, F., Koch, T., Macfelda, K., Russmüller, G., Stampfl, J., & Liska, R. (2013). Biodegradable Bone Replacement Material From Low Cytotoxic Monomers. In Abstracts (p. 244). http://hdl.handle.net/20.500.12708/48202 ( reposiTUm)
Potzmann, P., Seidler, K., Ligon, S., Koch, T., Stampfl, J., Messner, B., Grasl, C., Bergmeister, H., Schima, H., & Liska, R. (2013). Thermoplastic polyurethane elastomers derived from new building blocks for vascular tissue engineering. In M. Zigon & T. Rajsp (Eds.), The Proceedings of the Austrian - Slovenian Polymer Meeting - ASPM 2013 (pp. 37–38). http://hdl.handle.net/20.500.12708/48197 ( reposiTUm)
Husar, B., Samusjew, A., Koch, T., Stampfl, J., & Liska, R. (2013). 3D fabrication of scaffolds from low cytotoxic vinylester and thiols. In Meeting Abstracts (p. 447). J Tissue Eng Regen Med. http://hdl.handle.net/20.500.12708/48578 ( reposiTUm)
Qin, X., Li, Z., Torgersen, J., Ovsianikov, A., Mühleder, S., Holnthoner, W., Stampfl, J., & Liska, R. (2012). Development of biocompatible 3D hydrogel scaffolds: From synthesis to two-photon-polymerization. In J. Stampfl (Ed.), Abstracts (p. 65). http://hdl.handle.net/20.500.12708/47528 ( reposiTUm)
Husar, B., Mautner, A., Heller, C., Schwentenwein, M., Varga, F., Koch, T., Macfelda, K., Russmüller, G., Stampfl, J., & Liska, R. (2012). 3D scaffolds from low toxic vinyl carbonates. In J. Stampfl (Ed.), Abstracts (p. 105). http://hdl.handle.net/20.500.12708/47776 ( reposiTUm)
Benedikt, S., Schachner, M., & Dworak, C. (2012). RAFT-generated amphiphilic block copolymers as multifunctional micelles. In J. Stampfl (Ed.), Abstracts (p. 131). http://hdl.handle.net/20.500.12708/47777 ( reposiTUm)
Li, Z., Qin, X., Ovsianikov, A., Torgersen, J., Mühleder, S., Holnthoner, W., Ajami, A., Husinsky, W., Stampfl, J., & Liska, R. (2012). Water Soluble Initiators for Two-photon Polymerization. In European Symposium of Photopolymer Science - Book of Abstracts (p. 26). http://hdl.handle.net/20.500.12708/48036 ( reposiTUm)
Qin, X., Li, Z., Ovsianikov, A., Torgersen, J., Mühleder, S., Holnthoner, W., Stampfl, J., & Liska, R. (2012). Developing biodegradable 3D hydrogel scaffolds: from synthesis to two-photon polymerization. In European Symposium of Photopolymer Science - Book of Abstracts (p. 19). http://hdl.handle.net/20.500.12708/48037 ( reposiTUm)
Wutzel, H., Kumpfmüller, J., Stadlmann, K., Li, Z., Stampfl, J., & Liska, R. (2012). Silicon-based waveguides via two-photon induced thiol-ene polymerization. In European Symposium of Photopolymer Science. European Symposium of Photopolymer Science - ESPS 2012, Torino, EU. http://hdl.handle.net/20.500.12708/48043 ( reposiTUm)
Wutzel, H., Mautner, A., Qin, X., Macfelda, K., Russmüller, G., Stampfl, J., & Liska, R. (2012). New monomers based on vinylcarbonates for biomedical applications. In European Symposium of Photopolymer Science - Book of Abstracts (p. 23). http://hdl.handle.net/20.500.12708/48038 ( reposiTUm)
Susec, M., Ligon, S., Stampfl, J., Liska, R., & Krajnc, P. (2012). Stereolithography with hierarchical polymers based on high internal phase emulsions. In European Symposium of Photopolymer Science - Book of Abstracts (p. 20). http://hdl.handle.net/20.500.12708/48041 ( reposiTUm)
Li, Z., Cicha, K., Ajami, A., Rosspeintner, A., Naumov, S., Scherzer, T., Stampfl, J., & Liska, R. (2012). A Straightforward Synthesis and Structure-Property Relationship of Highly Efficient Two-photon Photoinitiators for 3D microfabrication. In European Symposium of Photopolymer Science - Book of Abstracts (p. 24). http://hdl.handle.net/20.500.12708/48034 ( reposiTUm)
Li, Z., Cicha, K., Ajami, A., Rosspeintner, A., Naumov, S., Scherzer, T., Stampfl, J., & Liska, R. (2012). A facial preparation and structure property relationship of novel photoinitiators for two -photon photopolymerization. In 4#^{th} Bratislava Young Polymer Scientists workshop (p. 83). http://hdl.handle.net/20.500.12708/48032 ( reposiTUm)
Li, Z., Qin, X., Ovsianikov, A., Torgersen, J., Ajami, A., Stampfl, J., & Liska, R. (2012). 3D site-specific functionalization of matrices via multi-photon grafting and subsequent click reaction. In European Symposium of Photopolymer Science - Book of Abstracts (p. 25). http://hdl.handle.net/20.500.12708/48035 ( reposiTUm)
Li, Z., Ovsianikov, A., Torgersen, J., Stampfl, J., & Liska, R. (2012). 3D site-specific functionalization of matrices via multi-photon grafting and subsequent click reaction. In International Symposium on NanoPhotonics 2012. International Symposium on NanoPhotonics 2012, Beijing, Non-EU. http://hdl.handle.net/20.500.12708/48033 ( reposiTUm)
Liska, R., Gorsche, C., Gugg, A., Stampfl, J., & Moszner, N. (2012). Future Perspectives of photopolymerization. In J. Stampfl (Ed.), Abstracts (p. 129). http://hdl.handle.net/20.500.12708/48028 ( reposiTUm)
Susec, M., Liska, R., Ligon, S., & Krajnc, P. (2012). Hierarchically porous polymers from divinyladipate and thiols via emulsion templating. In J. Stampfl (Ed.), Abstracts (p. 83). http://hdl.handle.net/20.500.12708/48029 ( reposiTUm)
Qin, X., Li, Z., Torgersen, J., Ovsianikov, A., Mühleder, S., Holnthoner, W., Stampfl, J., & Liska, R. (2012). Developing Biodegradable 3D Hydrogels Scaffolds: From Synthesis to Two-photon Polymerization. In Journal of Tissue Engineering and Regenerative Medicine 2012 (p. 369). John Wiley & Sons, Ltd. http://hdl.handle.net/20.500.12708/48053 ( reposiTUm)
Qin, X., Li, Z., Ligon, S., Torgersen, J., Ovsianikov, A., Mühleder, S., Holnthoner, W., Stampfl, J., & Liska, R. (2012). Biodegradable 3D Hydrogel Scaffolds: Synthesis and Two-photon Polymerization. In E-Mrs 2012 Fall Meeting. E-MRS 2012 FALL MEETING (European Materials research Society), Warschau, EU. http://hdl.handle.net/20.500.12708/48049 ( reposiTUm)
Gorsche, C., Liska, R., Ligon, S., Husar, B., Mautner, A., Schwentenwein, M., Heller, C., Stampfl, J., & Russmüller, G. (2012). A new Generation of low toxic Monomers for Additive Manufacturing Technology. In E-MRS 2012 Fall Meeting. E-MRS 2012 FALL MEETING (European Materials research Society), Warschau, EU. http://hdl.handle.net/20.500.12708/48047 ( reposiTUm)
Gorsche, C., Mautner, A., Gugg, A., Qin, X., Moszner, N., Stampfl, J., Macfelda, K., Russmüller, G., & Liska, R. (2012). UV-Initiated Frontal Polymerization and Other New Advances in Radical Photopolymerization. In 18#^{th} Fusion UV Seminar 2012 - Proceedings (pp. 2–1). http://hdl.handle.net/20.500.12708/48050 ( reposiTUm)
Qin, X., Torgersen, J., Pucher, N. U., Mautner, A., Li, Z., Ovsianikov, A., & Stampfl, J. (2012). Multiphoton Fabrication of Protein Hydrogels in 3-dimensions via Thiol-ene Photo-click Reactions. In 9#^{th} World Biomaterials Congress (p. 1). http://hdl.handle.net/20.500.12708/48052 ( reposiTUm)
Li, Z., Qin, X., Ovsianikov, A., Torgersen, J., Ajami, A., Husinsky, W., Mühleder, S., Holnthoner, W., Stampfl, J., & Liska, R. (2012). Water Soluble Initiators for Two-photon Polymerization. In Journal of Tissue Engineering and Regenerative Medicine 2012 (p. 369). John Wiley & Sons, Ltd. http://hdl.handle.net/20.500.12708/48055 ( reposiTUm)
Potzmann, P., Seidler, K., Ligon, S., Koch, T., Stampfl, J., & Liska, R. (2012). New building blocks for thermoplastic polyurethane elastomers for soft tissue engineering. In Journal of Tissue Engineering and Regenerative Medicine 2012 (p. 215). John Wiley & Sons, Ltd. http://hdl.handle.net/20.500.12708/48054 ( reposiTUm)
Ligon, S., Husar, B., Mautner, A., Heller, C., Schwentenwein, M., Wilke, A., Russmüller, G., Stampfl, J., & Liska, R. (2012). Biocompatible monomers for photo-based additive manufacturing technologies. In MSE 2012 Darmstadt (p. 380). http://hdl.handle.net/20.500.12708/48058 ( reposiTUm)
Li, Z., Qin, X., Ovsianikov, A., Torgersen, J., Ajami, A., Husinsky, W., Mühleder, S., Holnthoner, W., Stampfl, J., & Liska, R. (2012). Novel water soluble two-photon initiators for 3D scaffold microfabrication. In J. Stampfl (Ed.), 5#^{th} Vienna Biomaterialsymposium 19.11.-21.11.2012 (p. 95). http://hdl.handle.net/20.500.12708/48025 ( reposiTUm)
Höller, F., Ovsianikov, A., Torgersen, J., Koch, T., Dekel, D., Levenberg, S., Nürnberger, S., Redl, H., Liska, R., & Stampfl, J. (2012). Laser microfabrication of elastic 3D scaffolds. In Abstracts 5th Biomaterialsymposium Vienna (pp. 107–108). http://hdl.handle.net/20.500.12708/66679 ( reposiTUm)
Ovsianikov, A., Torgersen, J., Qin, X., Li, Z., Mühleder, S., Holnthoner, W., Liska, R., & Stampfl, J. (2012). Engineering 3D cell-culture matrices with femtosecond laserinduced photochemistry. In Abstracts 5th Biomaterialsymposium Vienna (pp. 15–16). http://hdl.handle.net/20.500.12708/66678 ( reposiTUm)
Ovsianikov, A., Dado-Rosenfeld, D., Nürnberger, S., Levenberg, S., Redl, H., Liska, R., & Stampfl, J. (2012). Laser fabrication of multi-scale elastic 3D scaffolds. In Journal of Tissue Engineering and Regenerative Medicine (p. 366). Wiley. http://hdl.handle.net/20.500.12708/66680 ( reposiTUm)
Torgersen, J., Ovsianikov, A., Mironov, V., Pucher, N. U., Qin, X., Cicha, K., Li, Z., Machacek, T., Jantsch-Plunger, V., Liska, R., & Stampfl, J. (2012). Biocompatible Hydrogels for the Three-dimensional Micro-fabrication of Extracellular Environments. In Bio-inspired Materials International School and Conference on Biological Materials Science (p. 20). DGM Programme. http://hdl.handle.net/20.500.12708/66525 ( reposiTUm)
Gruber, S., Felzmann, R., Mitteramskogler, G., Liska, R., & Stampfl, J. (2012). Generation of ceramic parts via lithography-based AMT. In MSE Programme (p. 37). http://hdl.handle.net/20.500.12708/66592 ( reposiTUm)
Ovsianikov, A., Nürnberger, S., Torgersen, J., Li, Z., Redl, H., Liska, R., & Stampfl, J. (2012). Fabrication of elastic 3D scaffolds by two-photon polymerization. In MSE Programme (p. 37). http://hdl.handle.net/20.500.12708/66590 ( reposiTUm)
Ligon, S., Baudis, S., Nehl, F., Mautner, A., Husar, B., Schwentenwein, M., Wilke, A., Stampfl, J., Russmüller, G., & Liska, R. (2012). Biocompatible monomers for photo-based additive manufacturing technologies. In MSE Programme (p. 62). http://hdl.handle.net/20.500.12708/66593 ( reposiTUm)
Stampfl, J., Torgersen, J., Ovsianikov, A., Qin, X., Li, Z., Mühleder, S., Holnthoner, W., & Liska, R. (2012). Photo-stimulation of low-toxicity biopolymers in additive manufacturing. In MSE Programme (p. 22). http://hdl.handle.net/20.500.12708/66591 ( reposiTUm)
Hatzenbichler, M., Felzmann, R., Gruber, S., Mitteramskogler, G., Tesavibul, P., Stampfl, J., & Liska, R. (2012). Additive Manufacturing of high performance ceramic structures. In H. Noll, N. Adamovic, & S. Dimov (Eds.), Multi-material Micro Manufacture (pp. 16–19). Research Publishing. http://hdl.handle.net/20.500.12708/66656 ( reposiTUm)
Gruber, S., Mitteramskogler, G., Felzmann, R., Tesavibul, P., Liska, R., & Stampfl, J. (2012). Generative Erzeugung von biokeramischen Bauteilen. In Fachmesse und Anwendertagung für Rapid-Technologie (p. 88 (105)). http://hdl.handle.net/20.500.12708/66637 ( reposiTUm)
Gruber, S., Torgersen, J., Neumeister, A., Felzmann, R., Liska, R., & Stampfl, J. (2012). Advanced Photopolymer-based Additive Manufacturing Systems Using High Performance Light Sources. In 7th International Symposium on Emerging and Industrial DLP® Applications. 7th International Symposium on Emerging and Industrial DLP® Applications, Frankfurt, EU. http://hdl.handle.net/20.500.12708/66636 ( reposiTUm)
Felzmann, R., Gruber, S., Mitteramskogler, G., Pastrama, M.-I., Boccaccini, A., & Stampfl, J. (2012). Lithography-Based Additive Manufacturing Of Customized Bioceramic Parts For Medical Applications. In Biomed 2013. Biomed 2013, Innsbruck, Austria. ACTA Press Proceedings. http://hdl.handle.net/20.500.12708/66872 ( reposiTUm)
Hatzenbichler, M., Geppert, M., Gruber, S., Ipp, E., Almedal, R., & Stampfl, J. (2012). DLP based light engines for additive manufacturing of ceramic parts. In M. R. Douglass & P. I. Oden (Eds.), Emerging Digital Micromirror Based Systems and Applications IV. https://doi.org/10.1117/12.907113 ( reposiTUm)
Nehl, F., Wilhelm, H., Bergmeister, H., Stampfl, J., & Liska, R. (2011). Mechanical Characteriszation of Photoelastomers for Vascular Tissue Regeneration. In ESAO-ASAIO Winter School (pp. 56–57). http://hdl.handle.net/20.500.12708/47459 ( reposiTUm)
Liska, R., Schwentenwein, M., Baudis, S., Ligon, S., Mautner, A., Gugg, A., Li, Z., Gorsche, C., Pucher, N. U., Torgersen, J., Nehl, F., Bergmeister, H., Macfelda, K., Koch, T., Russmüller, G., & Stampfl, J. (2011). 3D-Printing of Advanced Biomaterials by Additive Manufacturing Technologies. In IUPAC 9#^{th} International Conference on Advanced Polymers via Macromolecular Engineering (APME 2011) - Program and Abstract Book (p. 101). http://hdl.handle.net/20.500.12708/47670 ( reposiTUm)
Baudis, S., Nehl, F., Ligon, S., Wutzel, H., Nigisch, A., Bergmeister, H., Bernhard, D., Stampfl, J., & Liska, R. (2011). Urethane-based photoelastomers with defined cellular struchture for scaffold-based vascular tissue engineering. In IUPAC 9#^{th} International Conference on Advanced Polymers via Macromolecular Engineering (APME 2011) - Program and Abstract Book (p. 148). http://hdl.handle.net/20.500.12708/47673 ( reposiTUm)
Ligon, S., Kumpfmüller, J., Li, Z., Stadlmann, K., Cicha, K., Ovsianikov, A., Ajami, A., Husinsky, W., Rosspeintner, A., Stampfl, J., & Liska, R. (2011). Real 3D writing by two photon induced polymerization. In RadTech Europe 2011 - Abstract Book (p. 78). http://hdl.handle.net/20.500.12708/47650 ( reposiTUm)
Mautner, A., Qin, X., Macfelda, K., Russmüller, G., Stampfl, J., & Liska, R. (2011). Efficient curing of vinyl esters and vinyl carbonates by thiol-ene polymerization. In RadTech Europe 2011 - Abstract Book. RadTech Europe 2011, Basel, CH, Non-EU. http://hdl.handle.net/20.500.12708/47648 ( reposiTUm)
Schwentenwein, M., Nehl, F., Wilhelm, H., Bergmeister, H., Bernhard, D., Stampfl, J., & Liska, R. (2011). Photoelastomers based on thiol-ene polymerization. In RadTech Europe 2011 - Abstract Book (p. 90). http://hdl.handle.net/20.500.12708/47649 ( reposiTUm)
Schwentenwein, M., Baudis, S., Nehl, F., Ligon, S., Nigisch, A., Bergmeister, H., Blümel, A., Grogger, W., Bernhard, D., Stampfl, J., & Liska, R. (2011). Elastomeric Photopolymers by Thiol-ene Polymerization for Vascular Tissue Engineering. In The International Journal of Artificial Organs (p. 679). Wichtig Editore. http://hdl.handle.net/20.500.12708/47481 ( reposiTUm)
Seidler, K., Ligon, S., Baudis, S., Koch, T., Stampfl, J., & Liska, R. (2011). Biodegradable Thermoplastic Polyurethanes: Synthesis and Characterization of Improved TPUs. In The International Journal of Artificial Organs (p. 692). Wichtig Editore. http://hdl.handle.net/20.500.12708/47478 ( reposiTUm)
Liska, R., Schwentenwein, M., Heller, C., Stampfl, J., & Russmüller, G. (2011). Printing of a New Generation of Low Toxicity Polymers by Additive Manufacturing Technology for Bone Tissue Engineering. In The International Journal of Artificial Organs (p. 634). Wichtig Editore. http://hdl.handle.net/20.500.12708/47480 ( reposiTUm)
Kumpfmüller, J., Stadlmann, K., Li, Z., Schmid, G., Stampfl, J., & Liska, R. (2011). Two-photon-induced microfabrication of flexible optical waveguides. In Program and Technical Digest (LPM2011) (p. 104). http://hdl.handle.net/20.500.12708/47474 ( reposiTUm)
Ligon, S., Dworak, C., Baudis, S., Nehl, F., Wilhelm, H., Bergmeister, H., Bernhard, D., Stampfl, J., & Liska, R. (2011). Tailor-made Biomaterials for Vascular Tissue Regeneration printed by Additive Manufacturing Technologies. In Ninth International Symposium on Frontiers in Biomedical Polymers (pp. 87–88). http://hdl.handle.net/20.500.12708/47469 ( reposiTUm)
Ligon, S., Heller, C., Schwentenwein, M., Stampfl, J., Varga, F., Russmüller, G., & Liska, R. (2011). Rapid Prototyping of Bioabsorbalbe Polyvinylesters for Tissue Engineering. In ESAO-ASAIO Winter School (p. 51). http://hdl.handle.net/20.500.12708/47472 ( reposiTUm)
Liska, R., Schwentenwein, M., Heller, C., Stampfl, J., & Russmüller, G. (2011). Low toxic monomers based on vinylesters and carbonates for additive manufacturing technology. In Ninth International Symposium on Frontiers in Biomedical Polymers (p. 47). http://hdl.handle.net/20.500.12708/47467 ( reposiTUm)
Schwentenwein, M., Stampfl, J., Heller, C., Varga, F., Russmüller, G., & Liska, R. (2011). 3D-Structuring of Poly(vinyl alcohol)-based Photopolymers. In TERMIS EU 2011 Annual Meeting. Termis Eu 2011, Granada, E, EU. http://hdl.handle.net/20.500.12708/47466 ( reposiTUm)
Schwentenwein, M., Heller, C., Stampfl, J., Varga, F., Russmüller, G., & Liska, R. (2011). New Types of Photopolymers for Regenerative Medicine. In ESAO-ASAIO Winter School (p. 66). http://hdl.handle.net/20.500.12708/47471 ( reposiTUm)
Schwentenwein, M., Heller, C., Varga, F., Russmüller, G., Stampfl, J., & Liska, R. (2011). 3d-Fabrication Of Biodegradable Poly(vinyl Alcohol)-Based. In 19#^{th} Annual Meeting of the BioEnvironmental Polymer Society (p. OP-10). http://hdl.handle.net/20.500.12708/48059 ( reposiTUm)
Cicha, K., Li, Z., Mautner, A., Stadlmann, K., Torgersen, J., Pucher, N. U., Markut-Kohl, R., Liska, R., & Stampfl, J. (2011). Fabrication and evaluation of 3D-micro-structures produced using two-photon-induced photopolymerization (TPIP or 2PP) by means of optical assessment and FTIR-spectroscopy. In Conference Proceeding Euromat 2011 (p. 0453). http://hdl.handle.net/20.500.12708/66391 ( reposiTUm)
Stampfl, J., Gruber, S., Felzmann, R., Springer, S., & Liska, R. (2011). Lithographiebasierte Fertigung keramischer Bauteile. In A. Gebhardt (Ed.), Fachmesse und Anwendertagung für Rapid-Technologie (p. 4). http://hdl.handle.net/20.500.12708/66313 ( reposiTUm)
Ovsianikov, A., Torgersen, J., Liska, R., & Stampfl, J. (2011). 3D photofabrication by femtosecond laser pulses and its applications in biomedicine. In 4th European Conference on Applications of Femtosecond Lasers in Materials Science- Femto Mat (p. 4). http://hdl.handle.net/20.500.12708/66412 ( reposiTUm)
Ovsianikov, A., Torgersen, J., Li, Z., & Stampfl, J. (2011). 3D photofabrication by femtosecond laser pulses and its applications in biomedicine. In Tagungsband Laser Precision Microfabrication 2011 (p. 121). http://hdl.handle.net/20.500.12708/66410 ( reposiTUm)
Wilke, A., Baudis, S., Wilhelm, H., Bergmeister, H., Nehl, F., Liska, R., & Stampfl, J. (2011). Additive Manufactured Photoelastomers as Tailor-made Biomaterials for Vascular Tissue Restoration. In Euromat 2011 Montpellier (pp. 0264-1–1). http://hdl.handle.net/20.500.12708/66409 ( reposiTUm)
Stampfl, J., Mitteramskogler, G., Springer, S., Gruber, S., Ovsianikov, A., & Liska, R. (2011). Lithography-based Additive Manufacturing of Cellular Ceramic and Composite Structures. In Euromat 2011 (p. 1). http://hdl.handle.net/20.500.12708/66376 ( reposiTUm)
Ovsianikov, A., Nehl, F., Baudis, S., Steyrer, B., Liska, R., & Stampfl, J. (2011). Microenvironments for the Generation of Bioartificial Tissues. In 24th European Conference on Biomaterials (p. 97). http://hdl.handle.net/20.500.12708/66414 ( reposiTUm)
Torgersen, J., Baudrimont, A., Pucher, N. U., Stadlmann, K., Cicha, K., Heller, C., Liska, R., & Stampfl, J. (2011). In Vivo Scaffold Fabrication. In D. Falkenhagen, E. F. Leonard, & S. Mikhalovsky (Eds.), Advancing Roles: Biomaterials in Artificial Organs and Regenerative Medicine (p. 70). http://hdl.handle.net/20.500.12708/66306 ( reposiTUm)
Torgersen, J., Baudrimont, A., Pucher, N. U., Stadlmann, K., Heller, C., Liska, R., & Stampfl, J. (2011). Biocompatible Materials structured in-vivo using high-resolution AMT. In Euro Biomat - European Symposium on Biomaterials and Related Areas (p. 18). http://hdl.handle.net/20.500.12708/66307 ( reposiTUm)
Li, Z., Siklos, M. I., Pucher, N. U., Cicha, K., Ajami, A., Husinsky, W., Rosspeintner, A., Vauthey, E., Gescheidt, G., Stampfl, J., & Liska, R. (2011). Several novel aromatic ketone-based initiators for two-photon polymerization. In RadTech Europe 2011 - Abstract Book (p. 126). http://hdl.handle.net/20.500.12708/47655 ( reposiTUm)
Husar, B., Schwentenwein, M., Heller, C., Mautner, A., Varga, F., Russmüller, G., Stampfl, J., & Liska, R. (2011). Biocompatible and biodegradable photopolymers from low cytotoxic vinyl esters. In RadTech Europe 2011 - Abstract Book (p. 118). http://hdl.handle.net/20.500.12708/47656 ( reposiTUm)
Kumpfmüller, J., Stadlmann, K., Satzinger, V., Stampfl, J., & Liska, R. (2011). Fabrication of flexible optical waveguides via two-photon induced thiol-ene polymerization. In RadTech Europe 2011 - Abstract Book (p. 124). http://hdl.handle.net/20.500.12708/47654 ( reposiTUm)
Siklos, M. I., Pucher, N. U., Li, Z., Cicha, K., Rosspeintner, A., Ajami, A., Gescheidt, G., Husinsky, W., Stampfl, J., & Liska, R. (2010). Structure optimization of novel initiators for two-photon polymerization (2PP) process. In Book of Abstracts. 11#^{th} International Symposium on Laser Precision Microfabrication, LPM 2010, Stuttgart, D, EU. http://hdl.handle.net/20.500.12708/46850 ( reposiTUm)
Siklos, M. I., Li, Z., Pucher, N. U., Liska, R., & Stampfl, J. (2010). New Initiators for Two-Photon Photopolymerisation. In Proceedings (pp. 211–212). http://hdl.handle.net/20.500.12708/47160 ( reposiTUm)
Zhiquan, L., Siklos, M. I., Pucher, N. U., Cicha, K., Ajami, A., Husinsky, W., Stampfl, J., & Liska, R. (2010). Synthesis and structure-activity relationship of serveral keton-based two-photon initiators. In European Symposium of Photopolymer Science - Abstract Book. European Symposium of Photopolymer Science, Mulhouse, France, EU. http://hdl.handle.net/20.500.12708/47189 ( reposiTUm)
Qin, X., Torgersen, J., Heller, C., Schwentenwein, M., Russmüller, G., Stampfl, J., & Liska, R. (2010). Two-photon induced Polymerization for 3D Microfabrication of Biocompatible and Biodegradable Hydrogels. In European Symposium of Photopolymer Science - Abstract Book. European Symposium of Photopolymer Science, Mulhouse, France, EU. http://hdl.handle.net/20.500.12708/47188 ( reposiTUm)
Husar, B., Schwentenwein, M., Heller, C., Varga, F., Russmüller, G., Stampfl, J., & Liska, R. (2010). Vinyl carbonates as low cytotoxicity monomers for fabrication of biocompatible 3d scaffolds. In European Symposium of Photopolymer Science - Abstract Book. European Symposium of Photopolymer Science, Mulhouse, France, EU. http://hdl.handle.net/20.500.12708/47185 ( reposiTUm)
Schwentenwein, M., Heller, C., Varga, F., Russmüller, G., Stampfl, J., & Liska, R. (2010). 3D fabrication of poly(vinyl alcohol)-based photopolymers for biomedical applications. In European Symposium of Photopolymer Science - Abstract Book. European Symposium of Photopolymer Science, Mulhouse, France, EU. http://hdl.handle.net/20.500.12708/47184 ( reposiTUm)
Baudis, S., Wilhelm, H., Bergmeister, H., Stampfl, J., & Liska, R. (2010). Additive Manufactured Photoelastomers as Tailor-made Biomaterials for Vascular Tissue Restoration. In European Symposium of Photopolymer Science - Abstract Book. European Symposium of Photopolymer Science, Mulhouse, France, EU. http://hdl.handle.net/20.500.12708/47183 ( reposiTUm)
Nehl, F., Baudis, S., Wilhelm, H., Bergmeister, H., Stampfl, J., & Liska, R. (2010). Mechanical Characterisation of Photoelastomers for Vascular Tissue Regeneration. In European Symposium of Photopolymer Science - Abstract Book. European Symposium of Photopolymer Science, Mulhouse, France, EU. http://hdl.handle.net/20.500.12708/47187 ( reposiTUm)
Mautner, A., Stampfl, J., & Liska, R. (2010). Influence of various additives onto the rheological and mechanical behavior of photopolymers. In European Symposium of Photopolymer Science - Abstract Book. European Symposium of Photopolymer Science, Mulhouse, France, EU. http://hdl.handle.net/20.500.12708/47186 ( reposiTUm)
Qin, X., Torgersen, J., Zhiquan, L., Ovsianikov, A., Heller, C., Schwentenwein, M., Russmüller, G., Stampfl, J., & Liska, R. (2010). Two-photon induced polymerization for 3D fabrication of Biocompatible and Biodegradable hydrogels. In Tagungsband (p. 56). http://hdl.handle.net/20.500.12708/47193 ( reposiTUm)
Husar, B., Schwentenwein, M., Heller, C., Varga, F., Russmüller, G., Stampfl, J., & Liska, R. (2010). Biomaterials based on low cytotoxicity vinyl esters for bone replacement application. In Tagungsband (p. 57). http://hdl.handle.net/20.500.12708/47194 ( reposiTUm)
Baudis, S., Grasl, C., Bergmeister, H., Schima, H., Stampfl, J., & Liska, R. (2010). (Bio)abbaubare Urethan-Elastomere für Elektroversponnene Blutgefäßersatzmaterialien. In Tagungsband (p. 7). http://hdl.handle.net/20.500.12708/47191 ( reposiTUm)
Torgersen, J., Baudrimont, A., Pucher, N. U., Stadlmann, K., Cicha, K., Heller, C., Liska, R., & Stampfl, J. (2010). In Vivo Writing using Two-Photon-Polymerization. In K. Sugioka (Ed.), Proceedings of LPM2010. http://hdl.handle.net/20.500.12708/46875 ( reposiTUm)
Stadlmann, K., Cicha, K., Kumpfmüller, J., Schmidt, V., Satzinger, V., Liska, R., & Stampfl, J. (2010). Fabrication of Optical Interconnects with Two Photon Polymerization. In K. Sugioka (Ed.), Proceedings of LPM2010. http://hdl.handle.net/20.500.12708/46876 ( reposiTUm)
Mautner, A., Stampfl, J., & Liska, R. (2010). Rheological and mechanical behavior of photopolymers with different additives. In Book of Abstracts (p. 190). http://hdl.handle.net/20.500.12708/46904 ( reposiTUm)
Heller, C., Qin, X., Schwentenwein, M., Russmüller, G., Varga, F., Liska, R., & Stampfl, J. (2010). 3D-Photopolymere auf Basis vonPolyvinylalkohol: Von der Synthese zur in-vivo-Anwendung. In J. Stampfl (Ed.), Tagungsband (p. 3). http://hdl.handle.net/20.500.12708/66164 ( reposiTUm)
Torgersen, J., Baudrimont, A., Pucher, N. U., Stadlmann, K., Cicha, K., Heller, C., Liska, R., & Stampfl, J. (2010). In Vivo Nanostructuring of Biocompatible Materials. In BioNanoMed 2010 (p. 12). http://hdl.handle.net/20.500.12708/66201 ( reposiTUm)
Torgersen, J., Baudrimont, A., Pucher, N. U., Stadlmann, K., Cicha, K., Heller, C., Liska, R., & Stampfl, J. (2010). In-Vivo-Writing mittels Zweiphotonenlithographie. In Tagungsband- 4. Wiener Biomaterialsymposium (p. 24). http://hdl.handle.net/20.500.12708/66202 ( reposiTUm)
Ovsianikov, A. (2010). Engineered cellular microenvironments by two-photon polymerization technique. In J. Stampfl (Ed.), Tagungsband (p. 5). http://hdl.handle.net/20.500.12708/66263 ( reposiTUm)
Baudis, S., Wilhelm, H., Bergmeister, H., Stampfl, J., & Liska, R. (2010). Generativ gefertigte Photoelastomere als maßgeschneiderte Biomaterialien für vaskuläre Geweberegeneration. In J. Stampfl (Ed.), Tagungsband (p. 6). http://hdl.handle.net/20.500.12708/66268 ( reposiTUm)
Teuschl, A., Hohlrieder, M., Stampfl, J., Cicha, K., Griensven, M., & Redl, H. (2010). Silk scaffolds for the replacement of the anterior cruciate ligament. In J. Stampfl (Ed.), Tagungsband (p. 15). http://hdl.handle.net/20.500.12708/66269 ( reposiTUm)
Russmüller, G., Liska, R., Moser, D., Stampfl, J., Schopper, C., & Ewers, R. (2010). Knochenregeneration mittels Photopolymeren - erste in-vivo-Ergebnisse. In J. Stampfl (Ed.), Tagungsband (p. 16). http://hdl.handle.net/20.500.12708/66270 ( reposiTUm)
Gruber, S., Monfared, A., Blevins, N., Salisbury, K., & Stampfl, J. (2010). Multi-material middle-ear simulator - generative manufacturing technology for medical applications. In J. Stampfl (Ed.), Tagungsband (p. 54). http://hdl.handle.net/20.500.12708/66273 ( reposiTUm)
Tesavibul, P., Patzer, J., Felzmann, R., Liska, R., & Stampfl, J. (2010). Customized ceramic implants made by lithography based additive manufacturing. In J. Stampfl (Ed.), Tagungsband (p. 25). http://hdl.handle.net/20.500.12708/66272 ( reposiTUm)
Ovsianikov, A., Deiwick, A., Van Vlierberghe, S., Dubruel, P., Stampfl, J., & Chichkov, B. (2010). Laser fabrication of 3D CAD scaffolds for applications in tissue engineering. In M. Malatschnig (Ed.), BioNanoMed 2010. http://hdl.handle.net/20.500.12708/66264 ( reposiTUm)
Torgersen, J., Baudrimont, A., Pucher, N. U., Stadlmann, K., Cicha, K., Heller, C., Stampfl, J., & Liska, R. (2010). Poster F5-64 In-Vivo Writing using Two-Photon-Polymerization as Enabling Technology for Making Use of Bio-inspired Structures. In Tagungsband Material science and engineering 2010 (p. 45). http://hdl.handle.net/20.500.12708/66277 ( reposiTUm)
Wild, E., Hohlrieder, M., Redl, H., Teuschl, A., & Stampfl, J. (2010). Fixierungssysteme für ein künstliches vorderes Kreuzband. In J. Stampfl (Ed.), Tagungsband (p. 22). http://hdl.handle.net/20.500.12708/66271 ( reposiTUm)
Stadlmann, K., Cicha, K., Kumpfmüller, J., Liska, R., Stampfl, J., Hinze, U., & Chichkov, B. (2010). Development of a two Photon Polymerization setup for Structuring optical Waveguides with High Throughput. In Tagungsband Material science and engineering 2010 (p. 32). http://hdl.handle.net/20.500.12708/66281 ( reposiTUm)
Li, Z., Siklos, M. I., Cicha, K., Ajami, A., Husinsky, W., Stampfl, J., & Liska, R. (2010). C4-303 Synthesis and Structure-Activity Relationship of Several Novel Two-Photon Initiators based on a D-pi-A-pi-D Chromophor. In Tagungsband Material science and engineering 2010 (p. 40). http://hdl.handle.net/20.500.12708/66284 ( reposiTUm)
Pucher, N. U., Siklos, M. I., Rosspeintner, A., Ajami, A., Cicha, K., Gscheidt, G., Husinsky, W., Stampfl, J., & Liska, R. (2010). Optimization of feature resolution, processing window & structuring time for the two-photon polymerization (2PP) process by the use of novel initiators. In Proceedings of LPM2010 (pp. 1–6). http://hdl.handle.net/20.500.12708/167594 ( reposiTUm)
Rosenauer, M., Stampfl, J., & Vellekoop, M. J. (2009). A novel optofluidic evanescent waveguide sensor system for fluorescence spectroscopy fabricated by micro-stereolithography. In Conference Proceedings Transducers 2009 (pp. 718–721). http://hdl.handle.net/20.500.12708/71068 ( reposiTUm)
Pucher, N. U., Satzinger, V., Rosspeintner, A., Heller, C., Gescheidt, G., Schmidt, V., Stampfl, J., & Liska, R. (2009). Novel Highly Potential Initiators for the Two-Photon-Induced Photopolymerization Process. In Mater. Res. Soc. Symp. Proc. (p. 6). Material Research Society. http://hdl.handle.net/20.500.12708/46522 ( reposiTUm)
Heller, C., Schwentenwein, M., Varga, F., Russmüller, G., Stampfl, J., & Liska, R. (2009). 3D Fabrication of Poly(vinyl alcohol) based monomers. In 13. Österreichische Chemietage. 13. Österreichische Chemietage, Wien, Austria. http://hdl.handle.net/20.500.12708/46745 ( reposiTUm)
Heller, C., Schwentenwein, M., Baudis, S., Thaler, R., Varga, F., Stampfl, J., & Liska, R. (2009). 3D Fabrication of new poly(vinyl alcohol) based Scaffolds for Tissue Engineering. In Radtech Europe 2009, Proceedings (p. 7). http://hdl.handle.net/20.500.12708/46734 ( reposiTUm)
Liska, R., Bergmeister, H., Baudis, S., Dworak, C., Heller, C., Moszner, N., Porodec, M., Pucher, N. U., Russmüller, G., Schmidt, V., Schulz-Siegmund, M., Schwentenwein, M., Stampfl, J., Varga, F., & Weigel, G. (2009). Monomers and Photoinitiators for Biomedical Applications. In Radtech Europe 2009, Proceedings (p. 8). http://hdl.handle.net/20.500.12708/46728 ( reposiTUm)
Pucher, N. U., Rosspeintner, A., Kontur, S., Ajami, A., Husinsky, W., Gescheidt, G., Stampfl, J., & Liska, R. (2009). Photochemistry and Photophysics of Two-Photon Initiators. In Radtech Europe 2009, Proceedings (p. 6). http://hdl.handle.net/20.500.12708/46727 ( reposiTUm)
Liska, R., Pucher, N. U., Heller, C., Schwentenwein, M., Inführ, R., Satzinger, V., Gescheidt, G., Schmidt, V., Varga, F., & Stampfl, J. (2009). Materials for Stereolithography of Optical and Medical Devices. In EPF’09, Book of Abstracts (p. 192). http://hdl.handle.net/20.500.12708/46748 ( reposiTUm)
Kumpfmüller, J., Pucher, N. U., Stadlmann, K., Stampfl, J., & Liska, R. (2009). Photo-induced Waveguide formation in Polysiloxanes. In Radtech Europe 2009, Proceedings (p. 7). http://hdl.handle.net/20.500.12708/46742 ( reposiTUm)
Schwentenwein, M., Heller, C., Stampfl, J., Varga, F., & Liska, R. (2009). Biocompatible and Biodegradable monomers based on Oligoethylene glycols with different polymerizable groups. In Radtech Europe 2009, Proceedings (p. 6). http://hdl.handle.net/20.500.12708/46741 ( reposiTUm)
Kumpfmüller, J., Stadlmann, K., Inführ, R., Pucher, N. U., Stampfl, J., & Liska, R. (2009). Two-Photon-Induced Waveguide Formation In Polysiloxanes. In 13. Österreichische Chemietage (p. 14). http://hdl.handle.net/20.500.12708/47162 ( reposiTUm)
Baudis, S., Schwentenwein, M., Pulka, T., Steyrer, B., Wilhelm, H., Weigel, G., Bergmeister, H., Stampfl, J., & Liska, R. (2009). Studies on the mechanical behaviour of Photoelastomers for Vascular Tissue Regeneration. In Radtech Europe 2009, Proceedings (p. 6). http://hdl.handle.net/20.500.12708/46739 ( reposiTUm)
Pucher, N. U., Rosspeintner, A., Satzinger, V., Schmidt, V., Gescheidt, G., Stampfl, J., & Liska, R. (2009). Evaluation of Triple Bond Containing Photoinitiators for the Two-Photon Induced Photopolymerization Process. In Radtech Europe 2009, Proceedings (p. 6). http://hdl.handle.net/20.500.12708/46738 ( reposiTUm)
Schwentenwein, M., Heller, C., Stampfl, J., & Liska, R. (2009). Rapid Prototyping of Biocompatible and Biodegradable monomers. In Radtech Europe 2009, Proceedings (p. 8). http://hdl.handle.net/20.500.12708/46737 ( reposiTUm)
Heller, C., Schwentenwein, M., Liska, R., Stampfl, J., Varga, F., Porodec, M., Schulz-Siegmund, M., & Russmüller, G. (2009). New 3D-Biophotopolymers with Selective Surface-cell Interactions for Regnerative Medicine. In E-MRS 2008 spring meeting. MRS Fall Meeting 2009, Boston, MA, USA, Non-EU. http://hdl.handle.net/20.500.12708/46731 ( reposiTUm)
Stampfl, J., Heller, C., Schwentenwein, M., Russmüller, G., Varga, F., & Liska, R. (2009). Biophotopolymers for stereolithography and two-photon lithography. In F. Emmrich (Ed.), Regenerative Medicine (pp. S58–S59). Future Medicine. http://hdl.handle.net/20.500.12708/65977 ( reposiTUm)
Inführ, R., Pucher, N. U., Lichtenegger, H. C., Liska, R., Schmidt, V., Satzinger, V., Galler, N., Stadlmann, K., & Stampfl, J. (2009). Refractive Index Patterning of Flexible Waveguide Materials by Means of Two‑Photon 3D Lithography. In W. J. Bartz (Ed.), Nano-Technology (pp. 503–508). http://hdl.handle.net/20.500.12708/65979 ( reposiTUm)
Heller, C., Schwentenwein, M., Varga, F., Liska, R., & Stampfl, J. (2009). Biocompatible and biodegradable photopolymers for microstereolithography. In I. Miyamoto (Ed.), Proceedings of LAMP2009 (p. 5). Japan Laser Processing Society. http://hdl.handle.net/20.500.12708/65953 ( reposiTUm)
Heller, C., Schwentenwein, M., Pucher, N. U., Stadlmann, K., Koch, T., Varga, F., Stampfl, J., & Liska, R. (2009). 3D fabrication of new poly(vinyl alcohol) based Scaffolds for Tissue Engineering. In D. Helsby (Ed.), UV/EB- Sustainable Technology. http://hdl.handle.net/20.500.12708/66047 ( reposiTUm)
Stampfl, J., Heller, C., Schwentenwein, M., Baudis, S., Varga, F., & Liska, R. (2009). Entwicklung nicht-toxischer Biophotopolymere für die generative Fertigung. In W. Grellmann (Ed.), Tagungsband Deformation und Bruch (p. 4). http://hdl.handle.net/20.500.12708/65924 ( reposiTUm)
Stampfl, J., Inführ, R., Stadlmann, K., Pucher, N. U., Lichtenegger, H. C., Schmidt, V., & Liska, R. (2009). Materials for the fabrication of optical waveguides with two photon photopolymerization. In A. Ostendorf (Ed.), Lasers in Manufacturing 2009 (pp. P1–P4). AT Fachverlag GmbH. http://hdl.handle.net/20.500.12708/65919 ( reposiTUm)
Heller, C., Schwentenwein, M., Porodec, M., Schulz-Siegmund, M., Stampfl, J., Varga, F., & Liska, R. (2009). Poly(vinyl alcohol) based monomers for lithography-based 3D fabrication. In O. Dössel & W. Schlegel (Eds.), IFMBE Proceedings (p. 4). http://hdl.handle.net/20.500.12708/65912 ( reposiTUm)
Stampfl, J., Heller, C., Schwentenwein, M., Varga, F., & Liska, R. (2009). Biocompatible and biodegradeable photopolymers for lithography based solid freeform fabrication. In F. Stelzer (Ed.), Book of Abstracts (p. 208). http://hdl.handle.net/20.500.12708/65928 ( reposiTUm)
Hohlrieder, M., Cicha, K., Teuschl, A., van Griensven, M., Redl, H., & Stampfl, J. (2009). Bioreactor and scaffold design for the mechanical stimulation of silk based anterior cruciate ligament grafts. In O. Dössel & W. Schlegel (Eds.), IFMBE Proceedings (p. 3). http://hdl.handle.net/20.500.12708/65913 ( reposiTUm)
Inführ, R., Stampfl, J., Krivec, S., Liska, R., Lichtenegger, H. C., Satzinger, V., Schmidt, V., Matsko, N., & Grogger, W. (2009). 3D-structuring of optical waveguides with two photon polymerization. In S. M. Kuebler & V. T. Milam (Eds.), Material Systems and Processes for Three-Dimensional Micro- and Nanoscale Fabrication and Lithography (p. 7). http://hdl.handle.net/20.500.12708/65938 ( reposiTUm)
Heller, C., Schuster, M., Baudis, S., Turecek, C., Varga, F., Bergmeister, H., Weigel, G., Stampfl, J., & Liska, R. (2008). New Materials for 3D-Scaffolds for Tissue Engineering Applications. In Abstracts from TERMIS-EU 2008 Meeting (p. 761). Tissue Engineering, Part A. http://hdl.handle.net/20.500.12708/46747 ( reposiTUm)
Homa, J., & Stampfl, J. (2008). Fabrication of Ceramic Cross Flow Filters with Solid Freeform Fabrication. In Proceedings of the 2nd International Conference on Additive Technologies (p. 2). DAAM International. http://hdl.handle.net/20.500.12708/65772 ( reposiTUm)
Berg, A., Pfleger, M., Koch, T., & Stampfl, J. (2008). Erfassung mechanischer Eigenschaften von Kunststoff-Materialien für den Medizinischen Einsatz mit Methoden der Magnetresonanzbildgebeung. In 3. Wiener Biomaterialsymposium, Tagungsband (p. 43). http://hdl.handle.net/20.500.12708/65823 ( reposiTUm)
Gäbler, S., Koch, T., Stampfl, J., Seidler, S., Redl, H., Trattnig, S., & Weidisch, R. (2008). Bestimmung der viskoelastischen Eigenschaften von Hydrogelen basierend auf Polyethylenglykol-Diacrylat und humanem Gelenkknorpel. In 3. Wiener Biomaterialsymposium, Tagungsband (p. 47). http://hdl.handle.net/20.500.12708/65824 ( reposiTUm)
Heller, C., Schwentenwein, M., Baudis, S., Turecek, C., Varga, F., Stampfl, J., & Liska, R. (2008). Polyvinylalkohol basierende Photopolymere für die generative Fertigung von Gerüststrukturen für Tissue Engineering. In 3. Wiener Biomaterialsymposium - Tagungsband (p. 3). http://hdl.handle.net/20.500.12708/65826 ( reposiTUm)
Baudis, S., Schuster, M., Heller, C., Turecek, C., Varga, F., Bergmeister, H., Weigel, G., Stampfl, J., & Liska, R. (2008). Photoelastomere als biokompatible Blutgefäßersatzmaterialien. In 3. Wiener Biomaterialsymposium - Tagungsband (p. 41). http://hdl.handle.net/20.500.12708/65827 ( reposiTUm)
Porodec, M., Heller, C., Liska, R., Stampfl, J., Hacker, M., & Schulz-Siegmund, M. (2008). Surface Immobilization of model protein onto new photo cross-linkable materials. In 3. Wiener Biomaterialsymposium - Tagungsband (p. 60). http://hdl.handle.net/20.500.12708/65829 ( reposiTUm)
Hohlrieder, M., & Stampfl, J. (2008). Dauerfestigkeitsversuche mit künstlichen Bandmaterialien. In 3. Wiener Biomaterialsymposium - Tagungsband (p. 51). http://hdl.handle.net/20.500.12708/65828 ( reposiTUm)
Homa, J., Zellhofer, S., Liersch, A., & Stampfl, J. (2008). R-SiC for Novel Gel-cast Cross Flow Filter. In Proceedings of the 32nd International Conference & Exposition on Advanced Ceramics & Composites (p. 13). http://hdl.handle.net/20.500.12708/65830 ( reposiTUm)
Jenni, M., Zauner, R., Stampfl, J., & Morris, J. (2008). Quantitative study of process and material parameters on flow behavior and powder binder separation of feedstocks: Experimental design, 3D simulation model and balance model for separation in suspensions. In Advances in Powder Metallurgy & Particulate Materials (p. 10). http://hdl.handle.net/20.500.12708/65781 ( reposiTUm)
Stampfl, J., Heller, C., Schuster, M., Baudis, S., Homa, J., & Liska, R. (2008). Biofunktionelle Photopolymere für die generative Fertigung. In Tagungsband (p. 4). http://hdl.handle.net/20.500.12708/65745 ( reposiTUm)
Homa, J., Zellhofer, S., Liersch, A., & Stampfl, J. (2008). Solid Freeform Fabrication Of Monolithic Cross Flow Filters For Diesel Particulate Filtration. In 2nd International Congress On Ceramics Global Roadmap for Ceramics ICC2 - Proceedings (p. 6). ISTEC-CNR, Institute of Science and Technology for Ceramics. http://hdl.handle.net/20.500.12708/46091 ( reposiTUm)
Pucher, N. U., Inführ, R., Bashir, S., Satzinger, V., Schmidt, V., Husinsky, W., Lichtenegger, H. C., Stampfl, J., & Liska, R. (2008). Two-Photon Induced Photopolymerization - A Powerful Tool for Precise 3D Submicrofabrication. In 9#^{th} Austrian Polymer Meeting, Book of Abstracts (p. 11). http://hdl.handle.net/20.500.12708/46176 ( reposiTUm)
Heller, C., Schuster, M., Baudis, S., Turecek, C., Varga, F., Bergmeister, H., Weigel, G., Stampfl, J., & Liska, R. (2008). 3d-Fabrication of Photopolymers as Scaffolds for Tissue Engineering using Rapid Prototyping. In 9#^{th} Austrian Polymer Meeting, Book of Abstracts (p. 10). http://hdl.handle.net/20.500.12708/46175 ( reposiTUm)
Liska, R., Heller, C., Baudis, S., Schuster, M., Turecek, C., Bergmeister, H., Weigel, G., Schulz, M., Stampfl, J., & Varga, F. (2008). Biocompatible and biodegradable Photopolymers for Rapid Prototyping. In International Workshop on Biomacromolecules 2008, Book of Abstracts. International Workshop on Biomacromolecules 2008, Stockholm, S, EU. http://hdl.handle.net/20.500.12708/46173 ( reposiTUm)
Baudis, S., Schuster, M., Heller, C., Turecek, C., Varga, F., Bergmeister, H., Weigel, G., Stampfl, J., & Liska, R. (2008). Flexible, Biocompatible Photopolymers as Artificial Vascular Grafts. In 9#^{th} Austrian Polymer Meeting, Book of Abstracts (p. 61). http://hdl.handle.net/20.500.12708/46191 ( reposiTUm)
Liska, R., Schuster, M., Heller, C., Baudis, S., Pucher, N. U., Turecek, C., Schmidt, V., Bergmeister, H., Stampfl, J., Varga, F., & Weigel, G. (2008). New concepts of biocompatible and biodegradable photopolymers. In European Coatings Conference: “MEDICAL COATINGS AND ADHESIVES” Proceedings (pp. 117–127). http://hdl.handle.net/20.500.12708/46160 ( reposiTUm)
Schuster, M., Turecek, C., Varga, F., Weigel, G., Stampfl, J., Inführ, R., Heller, C., Baudis, S., & Liska, R. (2008). Fundamental investigations towards a new bone replacement material containing gelatin photopolymers. In International Workshop on Biomacromolecules 2008, Book of Abstracts. International Workshop on Biomacromolecules 2008, Stockholm, S, EU. http://hdl.handle.net/20.500.12708/46199 ( reposiTUm)
Porodec, M., Heller, C., Liska, R., Stampfl, J., & Hacker, M. (2008). Covalent modification of photo-cross-linkable polymers for bone tissue engineering using a model protein. In International Workshop on Biomacromolecules 2008, Book of Abstracts. International Workshop on Biomacromolecules 2008, Stockholm, S, EU. http://hdl.handle.net/20.500.12708/46198 ( reposiTUm)
Pucher, N. U., Baudis, S., Heller, C., Schuster, M., Satzinger, V., Schmidt, V., Lichtenegger, H. C., Stampfl, J., & Liska, R. (2008). Fabrication of Biocompatible and Cellular Polymers with Sub-Micrometer Feature Resolution by means of Two-Photon Induced Photopolymerization. In International Workshop on Biomacromolecules 2008, Book of Abstracts. International Workshop on Biomacromolecules 2008, Stockholm, S, EU. http://hdl.handle.net/20.500.12708/46196 ( reposiTUm)
Heller, C., Schwentenwein, M., Baudis, S., Turecek, C., Varga, F., Stampfl, J., & Liska, R. (2008). 3D Fabrication of new poly(vinyl alcohol) based scaffolds for Tissue Engineering and Regeneration. In International Workshop on Biomacromolecules 2008, Book of Abstracts. International Workshop on Biomacromolecules 2008, Stockholm, S, EU. http://hdl.handle.net/20.500.12708/46197 ( reposiTUm)
Baudis, S., Schuster, M., Heller, C., Turecek, C., Varga, F., Bergmeister, H., Weigel, G., Stampfl, J., & Liska, R. (2008). Tailored Photoelastomers as Biocompatible Blood Vessel Substitutes. In International Workshop on Biomacromolecules 2008, Book of Abstracts. International Workshop on Biomacromolecules 2008, Stockholm, S, EU. http://hdl.handle.net/20.500.12708/46200 ( reposiTUm)
Ajami, A., Rafique, M. S., Pucher, N. U., Bashir, S., Husinsky, W., Liska, R., Inführ, R., Lichtenegger, H., Stampfl, J., & Lüftenegger, S. (2008). Z-scan measurements of two-photon absorption for ultrashort laser radiation. In T. Dreischuh, E. Taskova, E. Borisova, & A. Serafetinides (Eds.), 15th International School on Quantum Electronics: Laser Physics and Applications (Issue 70271H, pp. 1–8). SPIE. https://doi.org/10.1117/12.822530 ( reposiTUm)
Inführ, R., Pucher, N., Heller, C., Lichtenegger, H. C., Schmidt, V., Satzinger, V., Kuna, L., Haase, A., Stampfl, J., & Liska, R. (2007). Refractive Index Patterning of Polymeric Waveguide Materials. In RadTech Europe 2007 - Conference Proceedings (p. 7). http://hdl.handle.net/20.500.12708/65634 ( reposiTUm)
Stampfl, J., Schuster, M., Heller, C., Liska, R., Turecek, C., & Varga, F. (2007). Entwicklung und mechanische Charakterisierung bioabbaubarer Photopolymere. In Tagungsband (p. 6). http://hdl.handle.net/20.500.12708/65556 ( reposiTUm)
Schuster, M., Turecek, C., Heller, C., Varga, F., Stampfl, J., & Liska, R. (2007). 3D-Structuring of Gelatine based Photopolymers. In RadTech Europe 2007 - Conference Proceedings (p. 6). http://hdl.handle.net/20.500.12708/65636 ( reposiTUm)
Baudis, S., Schuster, M., Heller, C., Turecek, C., Varga, F., Bergmeister, H., Weigel, G., Stampfl, J., & Liska, R. (2007). Flexible, biocompatible Photopolymers as Synthetic Vascular Replacement Materials. In RadTech Europe 2007 - Conference Proceedings (p. 6). http://hdl.handle.net/20.500.12708/65637 ( reposiTUm)
Stampfl, J., Schuster, M., Baudis, S., Lichtenegger, H. C., Liska, R., Turecek, C., & Varga, F. (2007). Biodegradable stereolithography resins with defined mechanical properties. In P. J. Bartolo (Ed.), Virtual and Rapid Manufacturing (pp. 283–288). Taylor and Francis. http://hdl.handle.net/20.500.12708/65585 ( reposiTUm)
Pucher, N., Heller, C., Seidl, B., Inführ, R., Kuna, L., Haase, A., Schmidt, V., Lichtenegger, H. C., Stampfl, J., & Liska, R. (2007). Two Photon Initiated Polymerization by Inones. In RadTech Europe 2007 - Conference Proceedings (p. 7). http://hdl.handle.net/20.500.12708/65635 ( reposiTUm)
Homa, J., Zellhofer, S., & Stampfl, J. (2007). Novel Fabrication Technique for Ceramic Filters. In Proceedings of the 10th International Conference of the European Ceramic Society (p. 6). Göller Verlag GmbH. http://hdl.handle.net/20.500.12708/65729 ( reposiTUm)
Schuster, M., Turecek, C., Stampfl, J., Varga, F., & Liska, R. (2007). Biofunctional Photopolymers for Micro-Stereolithography. In Proceedings of LPM2007 (p. 5). http://hdl.handle.net/20.500.12708/45963 ( reposiTUm)
Turecek, C., Schuster, M., Baudis, S., Liska, R., Stampfl, J., & Varga, F. (2007). Evaluation of biophotopolymers for bone replacement materials capabe for rapid prototyping. In D. Falkenhagen (Ed.), The International Journal of Artificial Organs, Abstracts of the XXXIV ESAO Congress (p. 723). The International Journal of Artificial Organs. http://hdl.handle.net/20.500.12708/46014 ( reposiTUm)
Schuster, M., Turecek, C., Stampfl, J., Varga, F., & Liska, R. (2007). Biophotopolymers for hard tissue replacement. In D. Falkenhagen (Ed.), The International Journal of Artificial Organs, Abstracts of the XXXIV ESAO Congress (p. 705). The International Journal of Artificial Organs. http://hdl.handle.net/20.500.12708/46015 ( reposiTUm)
Baudis, S., Schuster, M., Turecek, C., Bergmeister, H., Weigel, G., Stampfl, J., Varga, F., & Liska, R. (2007). Development of flexible biocompatible photopolymers as artificial vascular replacement materials. In D. Falkenhagen (Ed.), The International Journal of Artificial Organs, Abstracts of the XXXIV ESAO Congress (p. 705). The International Journal of Artificial Organs. http://hdl.handle.net/20.500.12708/46004 ( reposiTUm)
Homa, J., & Stampfl, J. (2006). Fabrication of Cellular Ceramic Structures by Gelcasting and Rapid Prototyping. In Junior Scientist Conference 2006. Proceedings (pp. 129–130). http://hdl.handle.net/20.500.12708/65381 ( reposiTUm)
Inführ, R., Fritscher, C., Schmidt, V., Kuna, L., Liska, R., Lichtenegger, H. C., & Stampfl, J. (2006). Structuring methods capable of building 3D parts with feature resolutions from 50 µm to 100 nm. In Junior Scientist Conference 2006. Proceedings (pp. 131–132). http://hdl.handle.net/20.500.12708/65380 ( reposiTUm)
Fritscher, C., Lichtenegger, H. C., Stampfl, J., Hüsing, N., Liska, R., Inführ, R., Koch, T., & Seidler, S. (2006). Hierarchisch strukturiertes Siliziumdioxid und seine mechanischen Eigenschaften. In 2. Wiener Biomaterialsymposium (p. 9). http://hdl.handle.net/20.500.12708/65512 ( reposiTUm)
Pfleger, M., Berg, A., Koch, T., & Stampfl, J. (2006). Korrelation des MR-Parameters T2* und den mechanischen Messgrößen Eindringhärte und Eindringmodul. In 2. Wiener Biomaterialsymposium (p. 1). http://hdl.handle.net/20.500.12708/65513 ( reposiTUm)
Liska, R., Schuster, M., Seidl, B., Inführ, R., Fritscher, C., Stampfl, J., Lichtenegger, H. C., Turecek, C., Varga, F., Schmidt, V., Kuna, L., & Haase, A. (2006). New Photopolymers for Rapid Prototyping. In Radcure Coatings and Inks: Cost & Performance (pp. 1–8). PRA Coatings Technology Centre. http://hdl.handle.net/20.500.12708/65470 ( reposiTUm)
Pucher, N., Heller, C., Seidl, B., Kuna, L., Haase, A., Schmidt, V., Lichtenegger, H. C., Stampfl, J., & Liska, R. (2006). New Initiators for Two-Photon Photopolymerization. In 8th Austrian Polymer Meeting - The Chain of Knowledge - From Catalyst to Application. 8th Austrian Polymer Meeting, Johannes Kepler University, Linz, Austria. http://hdl.handle.net/20.500.12708/65665 ( reposiTUm)
Stampfl, J., Schuster, M., Inführ, R., Liska, R., Luxner, M., Pettermann, H. E., Varga, F., & Turecek, C. (2006). Rapid Prototyping als Fertigungswerkzeug zur Herstellung zellularer Strukturen. In 52. Metallkunde-Kolloquium: Werkstoffforschung für Wirtschaft und Gesellschaft. 52. Metallkunde Kolloquium, Lech am Arlberg, Austria. http://hdl.handle.net/20.500.12708/65378 ( reposiTUm)
Luxner, M., Stampfl, J., Woesz, A., Fratzl, P., & Pettermann, H. E. (2006). Influence of Structural Disorder on the Performance of 3D Open Cell Structures. In Proceedings of the III European Conference on Computational Solids and Structural Mechanics (p. 15). Associção Portuguesa de Mecânica Teórica, Aplicada e Computacional. http://hdl.handle.net/20.500.12708/65402 ( reposiTUm)
Fritscher, C., Lichtenegger, H. C., Stampfl, J., Hüsing, N., Liska, R., Inführ, R., Koch, T., & Seidler, S. (2006). 3-Dimensional Mesoporous Silica Monoliths and their Structural and Mechanical Properties. In Polymerwerkstoffe 2006 - Abstracts (p. 34). http://hdl.handle.net/20.500.12708/45536 ( reposiTUm)
Stampfl, J., Inführ, R., Seidl, B., Lichtenegger, H. C., Liska, R., Schmidt, V., Kuna, L., & Haase, A. (2006). Two-Photon-3D-lithography of Functional Polymers. In Polymerwerkstoffe 2006 -Abstracts (p. 36). http://hdl.handle.net/20.500.12708/45535 ( reposiTUm)
Fritscher, C., Lichtenegger, H. C., Stampfl, J., Hüsing, N., Liska, R., & Seidler, S. (2006). Nonostructured silica/polymer-monoliths. In ISOSXIV 3#^{rd} European Organosilicon Days - Abstracts (p. P071). http://hdl.handle.net/20.500.12708/45539 ( reposiTUm)
Schuster, M., Turecek, C., Mateos, A., Stampfl, J., Varga, F., & Liska, R. (2006). Evaluation of biocompatible Photopolymers for Rapid Prototyping of Bone Substitutes. In 2#^{nd} Stipomat Workshop - Book of Abstracts (p. P17). http://hdl.handle.net/20.500.12708/45538 ( reposiTUm)
Schuster, M., Turecek, C., Verdianz, T., Stampfl, J., Varga, F., & Liska, R. (2006). Development of Biodegradable Photopolymers. In 2#^{nd} Stipomat Workshop - Book of Abstracts (p. P16). http://hdl.handle.net/20.500.12708/45537 ( reposiTUm)
Schuster, M., Turecek, C., Kaiser, B., Varga, F., Stampfl, J., & Liska, R. (2006). Biophotopolymers for Rapid Prototyping of Cellular Bone Replacement Materials. In Junior Scientist Conference 2006 - Proceedings (pp. 173–174). http://hdl.handle.net/20.500.12708/45469 ( reposiTUm)
Schuster, M., Turecek, C., Varga, F., Lichtenegger, H. C., Stampfl, J., & Liska, R. (2006). Biodegradable photopolymers for bone tissue engeneering. In 8#^{th} Austrian Polymer Meeting - Abstracts. 8#^{th} Austrian Polymer Meeting, Linz, Austria, Austria. http://hdl.handle.net/20.500.12708/45523 ( reposiTUm)
Verdianz, T., Schuster, M., Rumpler, M., Turecek, C., Varga, F., Stampfl, J., & Liska, R. (2005). Biophotopolymers for rapid prototyping of cellular bone replacement materials. In CD European Polymer Congress 2005 (p. 2). http://hdl.handle.net/20.500.12708/45175 ( reposiTUm)
Liska, R., Schuster, M., Inführ, R., Turecek, C., Varga, F., Lichtenegger, H. C., & Stampfl, J. (2005). Photopolymers for Rapid Prototyping of cellular Biomaterials. In 7#^{th} Austrian Polymer Meeting - Final Program (p. 40). http://hdl.handle.net/20.500.12708/45160 ( reposiTUm)
Schuster, M., Turecek, C., Varga, F., Stampfl, J., & Liska, R. (2005). Acrylamide-based Biophotopolymers for Bone Tissue Engineering. In 7#^{th} Austrian Polymer Meeting - Final Program (p. 69). http://hdl.handle.net/20.500.12708/45165 ( reposiTUm)
Schuster, M., Turecek, C., Rumpler, M., Varga, F., Liska, R., & Stampfl, J. (2005). Development of Photopolymerizable Biopolymers for Rapid Prototyping of Cellular Bone Replacement Materials. In Euromat 2005 European Congress on Advanced Materials and Processes http.//www.Euromat2005.fems.org (p. 1). http://hdl.handle.net/20.500.12708/45301 ( reposiTUm)
Inführ, R., Liska, R., Lichtenegger, H. C., Fritscher, C., Stampfl, J., & Hüsing, N. (2005). 3D Lithography of Organo-Soluble Mold Materials for Sol-Gel Nanocomposites. In RadTech Europe 2005 Conference Proceedings Volume II (pp. 487–494). Rad Tech Europe Association. http://hdl.handle.net/20.500.12708/45300 ( reposiTUm)
Inführ, R., Lichtenegger, H. C., Fritscher, C., Stampfl, J., & Liska, R. (2005). 3D Lithography of organo-soluble mold materials. In 7th Austrian Polymer Meeting - Final Program (p. 67). http://hdl.handle.net/20.500.12708/65375 ( reposiTUm)
Stampfl, J., Luxner, M., Pettermann, H. E., Woesz, A., & Fratzl, P. (2005). Rapid Prototyping and Modelling of cellular solids. In Euromat 2005 European Congress on Advanced Materials and Processes (p. 1). DGM. http://hdl.handle.net/20.500.12708/65273 ( reposiTUm)
Inführ, R., Liska, R., Lichtenegger, H. C., Fritscher, C., Stampfl, J., & Hüsing, N. (2005). 3D Lithography of Organo-Soluble Mold Materials for Sol-Gel Nanocomposites. In RadTech Europe 2005 Conference Proceedings Volume II (pp. 487–492). Radtech Europe Association. http://hdl.handle.net/20.500.12708/65278 ( reposiTUm)
Schuster, M., Chen, S. X., Liska, R., Rumpler, M., Turecek, C., Varga, F., & Stampfl, J. (2005). Development of Biodegradable Photopolymers for Bone Tissue Engineering. In RadTech Europe 2005 Conference Proceedings Volume II (pp. 365–372). http://hdl.handle.net/20.500.12708/65308 ( reposiTUm)
Inführ, R., Fritscher, C., Liska, R., Lichtenegger, H. C., Stampfl, J., & Hüsing, N. (2005). Fabrication of Bio-Inspired Ceramic Composites Using Soluble Photopolymers asMmold Materials. In Euromat 2005 European Congress on Advanced Materials and Processes (p. 1). http://hdl.handle.net/20.500.12708/65310 ( reposiTUm)
Fritscher, C., Lichtenegger, H. C., Stampfl, J., Hüsing, N., & Liska, R. (2005). TEMPLATING OF ORGANIC/INORGANIC HYBRID MATERIALS. In E-MRS 2005 Spring Meeting (pp. I-28/54). http://hdl.handle.net/20.500.12708/65312 ( reposiTUm)
Fritscher, C., Lichtenegger, H. C., Stampfl, J., Hüsing, N., Liska, R., & Seidler, S. (2005). NANOSTRUCTURED SILICA/POLYMER-MONOLITHS. In ISOS XIV, 14th International Symposium on Organosilicon Chemistry (p. 158). http://hdl.handle.net/20.500.12708/65311 ( reposiTUm)
Woesz, A., Rumpler, M., Manjubala, I., Pilz, I., Varga, F., Stampfl, J., & Fratzl, P. (2005). The influence of the thermal treatment of hydroxylapatite scaffolds on the physical properties and the bone cell ingrowth behaviour. In P. Fratzl (Ed.), Structure and Mechanical Behavior of Biological Materials (p. L7.9.1). Materials Research Society. http://hdl.handle.net/20.500.12708/65277 ( reposiTUm)
Inführ, R., Lichtenegger, H. C., Stampfl, J., Liska, R., Fritscher, C., & Hüsing, N. (2005). 3D Microstereolithography of soluble mold materials. In 31st International Conference on Micro- and Nano-Engineering 2005 - Abstracts (p. 9D_04). http://hdl.handle.net/20.500.12708/65279 ( reposiTUm)
Schuster, M., Chen, S. X., Liska, R., Turecek, C., Varga, F., & Stampfl, J. (2005). Photopolymerizable Biopolymers for Rapid Prototyping of Cellular Bone Replacement Materials. In RadTech Europe 2005 Conference Proceedings Volume II (pp. 479–486). http://hdl.handle.net/20.500.12708/65333 ( reposiTUm)
Fritscher, C., Lichtenegger, H. C., Stampfl, J., Hüsing, N., Liska, R., Inführ, R., & Seidler, S. (2005). Templating of organic/inorganic hybrid materials. In European Materials Research Society Spring Meeting E-MRS 2005 - Scienific Programme (pp. I-28/54). http://hdl.handle.net/20.500.12708/45542 ( reposiTUm)
Fritscher, C., Lichtenegger, H. C., Stampfl, J., Hüsing, N., Liska, R., & Seidler, S. (2004). Fabrication of Bio-inspired Silica Composites. In MRS Fall Meeting 2004 - Program & Exhibit Guide (p. 729). http://hdl.handle.net/20.500.12708/45172 ( reposiTUm)
Fritscher, C., Lichtenegger, H. C., Stampfl, J., Hüsing, N., Liska, R., & Seidler, S. (2004). Fabrication of Bio-inspired Silica Composites. In 2004 MRS Fall Meeting (p. 1). MRS. http://hdl.handle.net/20.500.12708/65188 ( reposiTUm)

Beiträge in Büchern

Stampfl, J., & Gmeiner, R. (2018). Additive Fertigung in der digitalen Zahnmedizin. In M. Rosentritt (Ed.), Werkstoffkunde in der Zahnmedizin (pp. 448–454). Georg Thieme Verlag KG. http://hdl.handle.net/20.500.12708/29780 ( reposiTUm)
Ligon, S., Kumpfmüller, J., Pucher, N. U., Stampfl, J., & Liska, R. (2016). Fabrication ofWaveguides and Other Optical Elements by Multiphoton Lithography. In Multiphoton Lithography (pp. 267–296). Wiley-VCH. http://hdl.handle.net/20.500.12708/29197 ( reposiTUm)
Husár, B., Hatzenbichler, M., Mironov, V., Liska, R., Stampfl, J., & Ovsianikov, A. (2014). Photopolymerization-based additive manufacturing for the development of 3D porous scaffolds. In Biomaterials for Bone Regeneration (pp. 149–201). Elsevier Science Ltd. https://doi.org/10.1533/9780857098104.2.149 ( reposiTUm)
Stampfl, J., Pettermann, H. E., & Luxner, M. H. (2011). Three-Dimensional Open Cell Structures: Evaluation and Fabrication by Additive Manufacturing. In F. Lasagni & A. Lasagni (Eds.), Fabrication and Characterization in the Micro-Nano Range (pp. 95–117). Springer-Verlag. https://doi.org/10.1007/978-3-642-17782-8_5 ( reposiTUm)
Stampfl, J., Pettermann, H. E., & Liska, R. (2011). Bioinspired Cellular Structures: Additive Manufacturing and Mechanical Properties. In P. Gruber, D. Bruckner, C. Hellmich, H.-B. Schmiedmayer, H. Stachelberger, & I. C. Gebeshuber (Eds.), Biological and Medical Physics, Biomedical Engineering (pp. 105–123). Springer-Verlag. https://doi.org/10.1007/978-3-642-11934-7_6 ( reposiTUm)
Stampfl, J., & Liska, R. (2011). Polymerizable Hydrogels for Rapid Prototyping: Chemistry, Photolithography, and Mechanical Properties. In P. J. Bartolo (Ed.), Stereolithography (pp. 161–182). Springer-Verlag. http://hdl.handle.net/20.500.12708/27189 ( reposiTUm)
Liska, R., & Stampfl, J. (2010). Photopolymers for rapid prototyping. In J. P. Fouassier & X. Allonas (Eds.), Basics and Applications of Photopolymerization Reactions (pp. 147–173). Research Signpost. http://hdl.handle.net/20.500.12708/27049 ( reposiTUm)
Neumeister, A., Passinger, S., Duziak, S., Stampfl, J., & Ostendorf, A. (2010). Micro- and Nanoparts generated by laser-based Solid Freeform Fabrication (SFF) technologies. In J. Lawrence, J. Pou, D. K. Y. Low, & E. Toyserkani (Eds.), Advances in laser materials processing technology: Technology, research and application (pp. 340–389). Woodhead Publishing Limited. http://hdl.handle.net/20.500.12708/26860 ( reposiTUm)

Bücher

Stampfl, J., Liska, R., & Ovsianikov, A. (Eds.). (2016). Multiphoton Lithography: Techniques, Materials and Applications. Wiley-VCH. http://hdl.handle.net/20.500.12708/24156 ( reposiTUm)

Tagungsbände

Berto, F., van Hoorweder, B., Iacoviello, F., Stampfl, J., Susmel, L., & Torgersen, J. (Eds.). (2021). The second European Conference on the Structural Integrity of Additively Manufactured Materials (Vol. 34). Elsevier BV. http://hdl.handle.net/20.500.12708/24903 ( reposiTUm)

Präsentationen

Nistler, S., Wojcik, T., Baudis, S., Schwentenwein, M., & Stampfl, J. (2025, April 24). Electron Backscatter Diffraction (EBSD) Analysis on Hybrid Bioceramic 3D-printed Parts [Conference Presentation]. The young Ceramists Additive Manufacturing Forum (yCAM 2025), Toulouse, France. http://hdl.handle.net/20.500.12708/216907 ( reposiTUm)
Nistler, S., & Stampfl, J. (2025, June 16). 3D-Druck von Biokeramiken in der Medizin: Aktueller Stand, Herausforderungen und Zukunftsperspektiven [Presentation]. Medical.Materials 2025, Linz, Austria. http://hdl.handle.net/20.500.12708/216908 ( reposiTUm)
Nistler, S., Hofstetter, C., Baudis, S., Schwentenwein, M., & Stampfl, J. (2025, May 14). Combining Two Different Bioceramic Materials via Sinter-joining [Conference Presentation]. 8th European Symposium on Biomaterials and Related Areas (BioMAT 2025), Weimar, Germany. http://hdl.handle.net/20.500.12708/216904 ( reposiTUm)
Nistler, S., Hofstetter, C., Baudis, S., Schwentenwein, M., & Stampfl, J. (2025, June 6). Sinter-joined bioceramics for hybrid bone implants [Conference Presentation]. Additive Manufacturing Meets Medicine (AMMM 2025), Lübeck, Germany. http://hdl.handle.net/20.500.12708/217085 ( reposiTUm)
Nistler, S., Hofstetter, C., Baudis, S., Schwentenwein, M., & Stampfl, J. (2025, March 7). Hybrid Bioceramic Implants Using Sinter-Joining [Conference Presentation]. Annual Meeting of the Austrian Cluster for Tissue Regeneration 2025, Wien, Austria. http://hdl.handle.net/20.500.12708/217323 ( reposiTUm)
Nistler, S., & Stampfl, J. (2025, February 19). Applications of 3D Printing in Engineering and Medical Practice [Presentation]. Wissenschaftsfestival Bydgoszcz, Bydgoszcz, Poland. http://hdl.handle.net/20.500.12708/217345 ( reposiTUm)
Nistler, S., & Stampfl, J. (2025, February 18). Applications of 3D Printing in Engineering and Medical Practice [Presentation]. Wissenschaftsfestival Bydgoszcz, Bydgoszcz, Poland. http://hdl.handle.net/20.500.12708/217344 ( reposiTUm)
Nistler, S., Baudis, S., & Stampfl, J. (2024, October 18). 3D-Druck in der Medizintechnik [Presentation]. Österreich liest, Wien, Austria. ( reposiTUm)
Ecker, J., Liska, R., & Stampfl, J. (2024, September 24). Towards Circular Electronics: Design for Disassembly Enabled by Multi-Material 3D Printing [Conference Presentation]. Material Science and Engineering MSE 2024, Darmstadt, Germany. ( reposiTUm)
Ecker, J., Liska, R., & Stampfl, J. (2024, June 18). Design for Disassembly - Using a Multi Material Approach in 3D Printing for Easier Recycling Strategies [Conference Presentation]. 8th European Symposium of Photopolymer Science (ESPS 2024), Stresa, Italy. ( reposiTUm)
Ahmadi, M., Koch, T., & Stampfl, J. (2024, September 26). Correlation between the suggested incompatibilities by Hansen solubility parameters and the optical changes obtained by phase separation in (meth)acrylate-based photopolymers [Conference Presentation]. MSE 2024: International Materials Science and Engineering Congress, Darmstadt, Germany. ( reposiTUm)
Ahmadi, M., Andriotis, O., Thurner, P. J., & Stampfl, J. (2024, February 21). Quantitative Characterization of Photopolymerization Induced Phase Separation By Atomic Force Microscopy [Poster Presentation]. 1st Faculty Science Day of the Faculty of Mechanical and Industrial Engineering, Wien, Austria. ( reposiTUm)
Ahmadi, M., & Stampfl, J. (2024, October 3). Materials and Additive Manufacturing Research Group - TU Wien [Presentation]. European Structural Integrity Society Austria (ESIS Austria), Wien, Austria. ( reposiTUm)
Kojic, D., Ehrmann, K., Stampfl, J., Baudis, S., & Liska, R. (2024). Exploring novel biodegradable biomaterials: Poly(ether)esters and aliphatic polycarbonates derived from spirocyclic compounds [Presentation]. Annual Meeting of the Austrian Cluster for Tissue Regeneration 2024, Krems an der Donau, Austria. http://hdl.handle.net/20.500.12708/208806 ( reposiTUm)
Mayer, F., Laa, D., Stampfl, J., Ehrmann, K., & Liska, R. (2024, June 19). HIGH PERFORMANCE INTERPENETRATING POLYMER NETWORKS FOR HOT LITHOGRAPHY [Conference Presentation]. 8th European Symposium of Photopolymer Science (ESPS 2024), Stresa, Italy. ( reposiTUm)
Ahmadi, M., Geyer, S., Hölzl, C., & Stampfl, J. (2024, June 19). Enhancing Photopolymer Performance: Exploring Phase Separation in (Meth)acrylate Systems for Additive Manufacturing [Conference Presentation]. 8th European Symposium of Photopolymer Science (ESPS 2024), Stresa, Italy. http://hdl.handle.net/20.500.12708/204981 ( reposiTUm)
Nistler, S., Hofstetter, C., Baudis, S., Schwentenwein, M., & Stampfl, J. (2024, May 6). Sinter-joining of Two Different Bioceramic Materials [Conference Presentation]. The young Ceramists Additive Manufacturing Forum (yCAM 2024), Tampere, Finnland, Finland. http://hdl.handle.net/20.500.12708/204673 ( reposiTUm)
Nistler, S., Hofstetter, C., Baudis, S., Schwentenwein, M., & Stampfl, J. (2024, September 25). Sinter-joining of Two Different Bioceramic Materials to Selectively Enhance Bone Implants [Conference Presentation]. Material Science and Engineering MSE 2024, Darmstadt, Germany. http://hdl.handle.net/20.500.12708/204672 ( reposiTUm)
Theuer, T., Baumgartner, S., Koch, B., Liska, R., & Stampfl, J. (2023, September 5). Digital Materials: hybrid printing process for large scale production [Conference Presentation]. FEMS EUROMAT 2023, Frankfurt am Main, Germany. ( reposiTUm)
Theuer, T., Baumgartner, S., Koch, B., Liska, R., & Stampfl, J. (2023, May 4). Digital Materials – Photopolymers with increased toughness [Conference Presentation]. 7th European Symposium on Biomaterials and Related Areas BioMAT 2023, Weimar, Germany. ( reposiTUm)
Ruppitsch, L. A., Ehrmann, K., Peer, G., Kury, M., Koch, T., Catel, Y., Stampfl, J., Moszner, N., & Liska, R. (2023, October 17). Cyclopolymerization - a strategy towards low shrinkage behavior for radical photopolymerization [Conference Presentation]. Radtech 2023, München, Germany. ( reposiTUm)
Ahmadi, M., Göschl, M., Liska, R., & Stampfl, J. (2023, September 6). Structure-property relationship in phase-separated (meth)acrylate photopolymers [Conference Presentation]. Materials Science and Technology in Europe : FEMS EUROMAT 2023, Frankfurt am Main, Germany. ( reposiTUm)
Stampfl, J. (2023, September 28). Additive Manufacturing: Trends, Technologies and To Dos [Keynote Presentation]. AM Ceramics 2023, Wien, Austria. ( reposiTUm)
Ecker, J., Liska, R., & Stampfl, J. (2023, September 5). Design for Disassembly – Using Digital Materials in Additive Manufacturing for Easier Recycling Strategies [Conference Presentation]. FEMS Euromat 23, Frankfurt am Main, Germany. ( reposiTUm)
Nistler, S., Hofstetter, C., Baudis, S., Schwentenwein, M., & Stampfl, J. (2023, September 4). Hydroxyapatite and Tricalcium Phosphate in Combination with Zirconia Manufactured by Digital Light Processing-based Vat Polymerization to Treat Large Bone Defects [Conference Presentation]. FEMS Euromat 23, Frankfurt am Main, Germany. http://hdl.handle.net/20.500.12708/189039 ( reposiTUm)
Nistler, S., Hofstetter, C., Baudis, S., Schwentenwein, M., & Stampfl, J. (2023, July 5). Hydroxyapatite and Tricalcium Phosphate in Combination with Zirconia Manufactured by Digital Light Processing-based Vat Polymerization [Conference Presentation]. Thermec 2023 - International Conference on Processing & Manufacturing of Advanced Materials, TU Wien, Austria. http://hdl.handle.net/20.500.12708/189037 ( reposiTUm)
Nistler, S., Hofstetter, C., Baudis, S., Schwentenwein, M., & Stampfl, J. (2023, August 31). Hydroxyapatite and Tricalcium Phosphate Sinter-Joined with Zirconia to Selectively Enhance Large Bone Implants Manufactured by Digital Light Processing-based Vat Polymerization [Poster Presentation]. yCAM Forum 2023, Leoben, Austria. http://hdl.handle.net/20.500.12708/189038 ( reposiTUm)
Theuer, T., Baumgartner, S., Koch, B., Liska, R., & Stampfl, J. (2023, September 4). Digital Materials – Bioinspired 3D-printing concept for photopolymers with increased toughness [Poster Presentation]. FEMS EUROMAT 2023, Frankfurt am Main, Germany. ( reposiTUm)
Ehrmann, K., Kojic, D., Schandl, S., Wolff, R., Koch, T., Stampfl, J., Gauci, S., Mert, T., Barner-Kowollik, C., & Liska, R. (2023, August). From Free Radical to Radical-Free Lithographic 3D Printing [Conference Presentation]. ACS Fall Meeting 2023, San Francisco, United States of America (the). http://hdl.handle.net/20.500.12708/193402 ( reposiTUm)
Ahmadi, M., Göschl, M., Liska, R., & Stampfl, J. (2022, September 27). A Study on Photopolymerization Kinetic Effects on the Microstructure of Phase separated (Meth)acrylates [Conference Presentation]. MSE 2022, Darmstadt, Germany. ( reposiTUm)
Ecker, J., Ehrmann, K., Stampfl, J., & Liska, R. (2022). Debonding on Demand of Epoxy Resins [Poster Presentation]. EPF European Polymer Congress 2022, Prag, Czechia. ( reposiTUm)
Mete, Y. D., Bomze, D., Klikovits, N., Kojic, D., Schandl, S., Wolff, R., Koch, T., Stampfl, J., & Liska, R. (2022). The bright future of 3D printing: Cationic photopolymerization in Hot Lithography [Conference Presentation]. EPF European Polymer Congress 2022, Prague, Czechia. ( reposiTUm)
Kutsch, A. L., Hofstetter, C., Nistler, S., Baudis, S., Schwentenwein, M., & Stampfl, J. (2022, September 22). Investigations on the Rheology and Deagglomeration of Digital Light Processing Based Vat Polymerisation of Si3N4-Slurries Containing Different Dispersing Additives [Conference Presentation]. Joint KMM-VIN / ViCEM / ESB Cross-disciplinary Workshop on Biomedical and Bioinspired Materials and Structures: A Cross-Disciplinary Approach, TU Wien, Austria. http://hdl.handle.net/20.500.12708/152919 ( reposiTUm)
Stampfl, J. (2022, January 25). 3D-printable Photopolymers:  Getting Ready for Manufacturing [Conference Presentation]. Workshop on Advances in Materials and Manufacturing, Virtuelle Konferenz, United States of America (the). ( reposiTUm)
Ehrmann, K., Tugce N Eren Mert, Mete, Y. D., Bomze, D., Klikovits, N., Kojic, D., Schandl, S., Wolff, R., Koch, T., Stampfl, J., & Liska, R. (2022). Diversifying Processing Parameters and Polymerization Mechanisms for SLA printing [Keynote Presentation]. PPC17 Pacific Polymer Conference, Brisbane, Austria. http://hdl.handle.net/20.500.12708/153666 ( reposiTUm)
Wolff, R., Ehrmann, K., Knaack, P., Seidler, K., Gorsche, C., Koch, T., Stampfl, J., & Liska, R. (2022, June 29). Photo-chemically induced polycondensation of a pure phenolic resin for additive manufacturing [Conference Presentation]. EPF European Polymer Congress 2022, Prag, Czechia. http://hdl.handle.net/20.500.12708/152798 ( reposiTUm)
Kutsch, A. L., Baumgartner, S., & Stampfl, J. (2021). Concepts for toughening 3D-printable polymers and ceramics. THERMEC 2021, Online, Austria. http://hdl.handle.net/20.500.12708/95520 ( reposiTUm)
Kutsch, A. L., Hofstetter, C., Schwentenwein, M., & Stampfl, J. (2021). Lithography-Based Additive Manufacturing Of Alumina. Virtual European Symposium of Photopolymer Sciences 2021, Online, Unknown. http://hdl.handle.net/20.500.12708/95521 ( reposiTUm)
Kutsch, A. L., Hofstetter, C., & Stampfl, J. (2021). Optimization of rheological properties of 3D printable ceramic inks for biomedical applications. Austrian Cluster for Tissue Regeneration Annual Meeting 2021, Vienna, Austria. http://hdl.handle.net/20.500.12708/95522 ( reposiTUm)
Hochwallner, A., & Stampfl, J. (2021). Watching Polymer Networks Form: Molecular Dynamics Simulation of the Chain Growth Polymerization of Photopolymers. EUROMAT 2021, Online, Unknown. http://hdl.handle.net/20.500.12708/95573 ( reposiTUm)
Hochwallner, A., & Stampfl, J. (2021). Molecular Dynamics Simulation of the Mechanical Properties of Photopolymers used in 3D-Printing. ESIAM21 Virtual Conference, Vienna, Austria. http://hdl.handle.net/20.500.12708/95574 ( reposiTUm)
Kutsch, A. L., Schwentenwein, M., Hofstetter, C., & Stampfl, J. (2021). Lithography-based additive manufacturing of alumina. EUROMAT 2021, Online, Unknown. http://hdl.handle.net/20.500.12708/95519 ( reposiTUm)
Hochwallner, A., & Stampfl, J. (2021). Molecular Dynamics Simulation of the Dynamic Mechanical Response of Photopolymerized Methacrylate Networks. Virtual European Symposium of Photopolymer Sciences 2021, Online, Unknown. http://hdl.handle.net/20.500.12708/95575 ( reposiTUm)
Stampfl, J. (2021). 3D-printable photopolymers for applications in electronics, engineering and biomedicine. Virtual European Symposium of Photopolymer Sciences 2021, Online, Unknown. http://hdl.handle.net/20.500.12708/95581 ( reposiTUm)
Stampfl, J. (2021). Key IP issues of spinning out deep-tech SMEs. CIP Forum, Göteborg, Sweden. http://hdl.handle.net/20.500.12708/95582 ( reposiTUm)
Ahmadi, M., Hochwallner, A., Andriotis, O. G., Thurner, P. J., & Stampfl, J. (2021). Characterization of Phase-Separated (Meth)acrylate Photopolymers. EUROMAT 2021, Online, Unknown. http://hdl.handle.net/20.500.12708/95482 ( reposiTUm)
Stögerer, J., Baumgartner, S., & Stampfl, J. (2021). Multi-material Toughening of Composites in Polymer 3D-Printing. EUROMAT 2021, Online, Unknown. http://hdl.handle.net/20.500.12708/95479 ( reposiTUm)
Kutsch, A. L., Hofstetter, C., Baudis, S., Schwentenwein, M., & Stampfl, J. (2021). Investigations on the rheology and deagglomeration of digital light processing based vat polymerisation of Si3N4 slurries containing different dispersing additives. ESIAM 2021, Wien, Austria. http://hdl.handle.net/20.500.12708/95504 ( reposiTUm)
Koch, B., Hochwallner, A., Liska, R., & Stampfl, J. (2021). Ink development for the fabrication of digital materials with increased fracture toughness. ESIAM21, Unknown. http://hdl.handle.net/20.500.12708/101644 ( reposiTUm)
Rath, T., Seidler, K., Addison, R., Holzhausen, E., & Stampfl, J. (2021). An ivory-like material for stereolithography based additive manufacturing. EUROMAT 2021, Online, Unknown. http://hdl.handle.net/20.500.12708/95477 ( reposiTUm)
Kutsch, A. L., Schwentenwein, M., Hofstetter, C., & Stampfl, J. (2020). Lithography-based additive manufacturing advancements of alumina. Young Ceramists Additive Manufacturing Forum, Online, Unknown. http://hdl.handle.net/20.500.12708/95445 ( reposiTUm)
Schönherr, J.-A., & Stampfl, J. (2020). The Additive Manufacturing Teaching Factory: Hands-on Learning Nuggets for Educating a Future Generation of European AM Specialists. Online Educa Berlin, Berlin, online, Germany. http://hdl.handle.net/20.500.12708/95397 ( reposiTUm)
Baumgartner, S., & Stampfl, J. (2020). Digital Toughening: Miming nacre-like structures via 3D-printing. 5th Bioinspired Materials 2020, Irsee/Online, Germany. http://hdl.handle.net/20.500.12708/95390 ( reposiTUm)
Rath, T., Seidler, K., Addison, R., Holzhausen, E., & Stampfl, J. (2020). Substituting Ivory with a 3D-printable Material. 5th Bioinspired Materials 2020, Irsee/Online, Germany. http://hdl.handle.net/20.500.12708/95398 ( reposiTUm)
Ahmadi, M., Andriotis, O. G., Hochwallner, A., Thurner, P. J., & Stampfl, J. (2019). Phase Separation in (Meth)acrylate-based Photopolymers. ESIAM, Trondheim, Norway. http://hdl.handle.net/20.500.12708/95483 ( reposiTUm)
Stögerer, J., Baumgartner, S., Hochwallner, A., & Stampfl, J. (2019). Bio-Inspired Toughening of Composites in 3D-Printing. ESIAM, Trondheim, Norway. http://hdl.handle.net/20.500.12708/95478 ( reposiTUm)
Steinbauer, P., Orman, S., Hofstetter, C., Schwentenwein, M., Russmüller, G., Stampfl, J., Liska, R., & Baudis, S. (2019). Tough photopolymers for bone tissue regeneration. ViCEM - Vienna Center for Engineering in Medicine - Biennial Meeting 2019, Wien, Austria. http://hdl.handle.net/20.500.12708/101424 ( reposiTUm)
Baumgartner, S., Gmeiner, R., & Stampfl, J. (2019). Stereolithography-based Additive Manufacturing of Dental Glass Ceramics. Euromat 2019, Stockholm, Sweden. http://hdl.handle.net/20.500.12708/94832 ( reposiTUm)
Steinbauer, P., Reichsöllner, R., Dellago, B., Ehrmann, K., Stampfl, J., Liska, R., & Baudis, S. (2019). Christian Doppler Laboratory for Advanced Polymers for Biomaterials and 3D Printing. 2nd Vienna Polymer-Group Symposium, Tulln, Austria. http://hdl.handle.net/20.500.12708/101133 ( reposiTUm)
Rath, T., Steyrer, B., Addison, R., Holzhausen, E., & Stampfl, J. (2019). Developing a new substitute for ivory using lithography based additive manufacturing. Euromat 2019, Stockholm, Sweden. http://hdl.handle.net/20.500.12708/95196 ( reposiTUm)
Stögerer, J., Steyrer, B., & Stampfl, J. (2019). Silicone acrylates as toughening agents for 3D-printable photopolymers. 2nd Vienna Polymer-Group Symposium, Tulln, Austria. http://hdl.handle.net/20.500.12708/95197 ( reposiTUm)
Baumgartner, S., & Stampfl, J. (2019). Digital Materials: Selective modification of material properties. Euromat 2019, Stockholm, Sweden. http://hdl.handle.net/20.500.12708/95148 ( reposiTUm)
Baumgartner, S., & Stampfl, J. (2019). Additive Manufacturing of dental glass ceramics. ViCEM - Vienna Center for Engineering in Medicine Biennial Meeting 2019, Wien, Austria. http://hdl.handle.net/20.500.12708/95194 ( reposiTUm)
Stampfl, J., & Schönherr, J.-A. (2019). Analysing the precision of lithography-based additively manufactured glass ceramic parts. Euromat 2019, Stockholm, Sweden. http://hdl.handle.net/20.500.12708/95242 ( reposiTUm)
Stampfl, J. (2019). 3D-printable materials: Design principles for strong and tough polymers, ceramics and metals. MAMC 2019, Örebro, Sweden. http://hdl.handle.net/20.500.12708/95244 ( reposiTUm)
Stampfl, J. (2019). Tough photopolymers for 3D-printing: Design principles and digital materials. ESIAM, Trondheim, Norway. http://hdl.handle.net/20.500.12708/95243 ( reposiTUm)
Steinbauer, P., Orman, S., Hofstetter, C., Schwentenwein, M., Russmüller, G., Stampfl, J., Liska, R., & Baudis, S. (2019). Tough photopolymers as customized biocompatible scaffolds for bone tissue regeneration. New Frontiers in Biofabrication: From Biomolecules to Tissues and Organs, Leuven, Belgium. http://hdl.handle.net/20.500.12708/101171 ( reposiTUm)
Stampfl, J. (2018). Additive Manufacturing for digital dentistry. MAMC, Wien, Austria. http://hdl.handle.net/20.500.12708/94975 ( reposiTUm)
Stampfl, J. (2018). Additive Fertigung: Technologien, Materialien, Märkte. 12. Technologieforum Mostviertel, Waidhofen an der Ybbs, Austria. http://hdl.handle.net/20.500.12708/94976 ( reposiTUm)
Baumgartner, S., & Stampfl, J. (2018). Lithography based additive manufacturing of structural and functional ceramics. 1st Vienna Polymer-Group Symposium, Wien, Austria. http://hdl.handle.net/20.500.12708/94873 ( reposiTUm)
Zerobin, E., Tromayer, M., Markovic, M., Steiger, W., Gruber, P., Stampfl, J., Ovsianikov, A., Baudis, S., & Liska, R. (2018). Hyaluronic acid as a basis for the development of hydrogel networks and Two-Photon Initiators. 1st Vienna Polymer-Group Symposium, Wien, Austria. http://hdl.handle.net/20.500.12708/94940 ( reposiTUm)
Stampfl, J. (2018). Polymere und Keramiken für die Additive Fertigung - Möglichkeiten und Herausforderungen. Production Engineering Graz, Graz, Austria. http://hdl.handle.net/20.500.12708/94896 ( reposiTUm)
Stampfl, J. (2018). 3D-Druck und Medizin: Potenzial & Innovationen bei Kunststoff und Keramik. Innovationstag Medizintechnik - Symbiose aus Simulation, 3D-Druck und Prüftechnik, Krems, Austria. http://hdl.handle.net/20.500.12708/94897 ( reposiTUm)
Baumgartner, S., Schönherr, J.-A., Schedle, A., & Stampfl, J. (2018). Lithography‐based Ceramic Manufacturing in Digital Dentistry. 1st Vienna Polymer-Group Symposium, Wien, Austria. http://hdl.handle.net/20.500.12708/94874 ( reposiTUm)
Busetti, B., Steyrer, B., & Stampfl, J. (2018). Toolless Manufacturing of Complex Structures. Vienna Polymer-Group Symposium, Universität Wien, Austria. http://hdl.handle.net/20.500.12708/94847 ( reposiTUm)
Liske, O., Dorfinger, P., Steyrer, B., Gorsche, C., Gmeiner, R., Stampfl, J., Liska, R., Baudis, S., & Knaus, S. (2018). Tailor-made 3D Manufactured Products from Bio-based Renewable Raw Materials. Blickpunkt Forschung: Materialinnovationen @ TU Wien, Wien, Austria. http://hdl.handle.net/20.500.12708/100833 ( reposiTUm)
Schönherr, J.-A., Baumgartner, S., Hartmann, M., & Stampfl, J. (2018). High-precision Lithography-based Ceramic Manufacturing (LCM). Materials Science and Engineering - MSE 2018, Darmstadt, Germany. http://hdl.handle.net/20.500.12708/94923 ( reposiTUm)
Baumgartner, S., & Stampfl, J. (2018). Nacre-inspired toughening of photopolymers by 3D-printing. Bio-inspired Materials 2018, Potsdam, Germany. http://hdl.handle.net/20.500.12708/94875 ( reposiTUm)
Steyrer, B., Liska, R., & Stampfl, J. (2018). Printing Photopolymers by Hot Lithography. Materials Science and Engineering - MSE 2018, Darmstadt, Germany. http://hdl.handle.net/20.500.12708/94915 ( reposiTUm)
Baudis, S., Orman, S., Mautner, A., Schwentenwein, M., Russmüller, G., Stampfl, J., & Liska, R. (2018). Biocompatible, tough photopolymers as 3D printed constructs for bone regeneration. 1st TERMIS-EU WORKSHOP in collaboration with ISBF “3D Printing in Musculoskeletal Tissue Engineering,” Warschau, Poland. http://hdl.handle.net/20.500.12708/100969 ( reposiTUm)
Stampfl, J. (2018). High Strength and High Quality Ceramic Parts Through Photolithographic Layered Manufacturing. Next Generation Material Design by Layered Manufacturing Technologies, Stanford, United States of America (the). http://hdl.handle.net/20.500.12708/94977 ( reposiTUm)
Baumgartner, S., & Stampfl, J. (2018). Digital Materials: A combination of Inkjet and Stereolithography. TheIJC USA 2018, Chicago, United States of America (the). http://hdl.handle.net/20.500.12708/94876 ( reposiTUm)
Zerobin, E., Baudis, S., Tomasikova, Z., Qin, X., Markovic, M., Gruber, P., Stampfl, J., Ovsianikov, A., & Liska, R. (2017). Two-Photon Structured Hydrogels based on Hyaluronic Acid for Applications in Tissue Engineering. Österreichische Gesellschaft für Biomedizinische Technik-Jahrestagung 2017, Wien, Austria. http://hdl.handle.net/20.500.12708/100384 ( reposiTUm)
Zerobin, E., Tromayer, M., Markovic, M., Gruber, P., Stampfl, J., Ovsianikov, A., Baudis, S., & Liska, R. (2017). Hyaluronic acid as a basis for the development of hydrogel networks and Two-Photon Initiators. ViCEM - Vienna Center for Engineering in Medicine Inaugural Meeting 2017, Wien, Austria. http://hdl.handle.net/20.500.12708/94720 ( reposiTUm)
Busetti, B., Baumgartner, S., Steiger, W., & Stampfl, J. (2017). DLP versus Laser. AM Ceramics, Wien, Austria. http://hdl.handle.net/20.500.12708/94693 ( reposiTUm)
Baumgartner, S., Schönherr, J.-A., Schedle, A., & Stampfl, J. (2017). Lithography-based Ceramic Manufacturing in Digital Dentistry. ViCEM - Vienna Center for Engineering in Medicine Inaugural Meeting 2017, Wien, Austria. http://hdl.handle.net/20.500.12708/94681 ( reposiTUm)
Kollmer, J., Grunenberg, D., Gorsche, C., Liska, R., & Stampfl, J. (2017). Lithographiebasierte GF für die Prozessierung hochviskoser Photopolymere. Internationale Messe & Konferenz für additive Technologien, Erfurt, Germany. http://hdl.handle.net/20.500.12708/100335 ( reposiTUm)
Harakaly, G., Kury, M., Gorsche, C., Seidler, K., Reghunathan, H., Dorfinger, P., Koch, T., Stampfl, J., Moszner, N., & Liska, R. (2017). Addition fragmentation chain transfer agents for formation of tough photopolymer network in 3D printing applications. Workshop Additive manufacturing as a tool to create life in 3D, Brno, Czechia. http://hdl.handle.net/20.500.12708/100346 ( reposiTUm)
Zerobin, E., Baudis, S., Tomasikova, Z., Qin, X., Markovic, M., Gruber, P., Stampfl, J., Ovsianikov, A., & Liska, R. (2017). High Resolved Biocompatible Hydrogel Constructs Based on Hyaluronic Acid. Workshop Additive manufacturing as a tool to create life in 3D, Brno, Czechia. http://hdl.handle.net/20.500.12708/100345 ( reposiTUm)
Schönherr, J.-A., Baumgartner, S., & Stampfl, J. (2017). Lithography-based Additive Manufacturing of high-precision ceramic parts. Jahrestagung der Deutschen Gesellschaft für Biomaterialien, Würzburg, Germany. http://hdl.handle.net/20.500.12708/94743 ( reposiTUm)
Busetti, B., & Stampfl, J. (2017). DLP + Laser: A throughput improved lithography based Additive Manufacturing Technologies (AMT) system with hybrid exposure concept. 12#^{th} International Symposium on Emerging and Industrial Texas Instruments DLP#^{®} Technology Applications, Hanau, Germany. http://hdl.handle.net/20.500.12708/94694 ( reposiTUm)
Busetti, B., & Stampfl, J. (2017). Kalibrierung des Arbeitsfeldes für ein 3D-Drucksystem. Kalibrierung des 2D- und 3D-Arbeitsfeldes von Laser-Scan-Systemen, Nürnberg, Germany. http://hdl.handle.net/20.500.12708/94695 ( reposiTUm)
Baumgartner, S., Grubhofer, M., & Stampfl, J. (2017). Nacre-like toughening of photopolymers. Radtech Europe 2017: Conference and Exhibition, Prag, Czechia. http://hdl.handle.net/20.500.12708/94682 ( reposiTUm)
Stampfl, J. (2016). Factories of the Future: ToMax. A journey into European Factories of the Future, Graz, Austria. http://hdl.handle.net/20.500.12708/94460 ( reposiTUm)
Kollmer, J., Dorfinger, P., Gorsche, C., Liska, R., & Stampfl, J. (2016). Toughening and coloring of photopolymers for lithography-based 3D-printing. 6th International Conference on Additive Technologies iCAT 2016, Nürnberg, Germany. http://hdl.handle.net/20.500.12708/94464 ( reposiTUm)
Pfaffinger, M., & Stampfl, J. (2016). Optimized Tricalcium Phosphate Slurry for Stereolithographic Additive Manufacturing. MSE 2016, Darmstadt, Germany. http://hdl.handle.net/20.500.12708/94463 ( reposiTUm)
Steyrer, B., Gorsche, C., Dorfinger, P., Liska, R., & Stampfl, J. (2016). Toughening of Photopolymers for Lithography-based Additive Manufacturing. MSE 2016, Darmstadt, Germany. http://hdl.handle.net/20.500.12708/94408 ( reposiTUm)
Stampfl, J. (2016). Bioprinter (3D-Drucker für Gewebe und Organe) in der Medizin - aktueller Stand. Symposium Intensivmedizin und Intensivpflege, Bremen, Germany. http://hdl.handle.net/20.500.12708/94354 ( reposiTUm)
Stampfl, J. (2015). 3D Druck mit Licht - Materialien und Anwendungen. Business Treff “ 3D-Druck - Additive Fertigung: Produktion im Wandel,” Wien, Austria. http://hdl.handle.net/20.500.12708/94159 ( reposiTUm)
Baumgartner, S., Ovsianikov, A., Gruber, P., Markovic, M., Oubaha, M., Duffy, B., & Stampfl, J. (2015). High-Resolution Laser-Based 3D Printing of Organic-Inorganic Hybrids. Polymer Processing Society Conference 2015, Graz, Austria. http://hdl.handle.net/20.500.12708/94194 ( reposiTUm)
Schönherr, J.-A., Gmeiner, R., Boccaccini, A., & Stampfl, J. (2015). Stereolithography-based additive manufacturing of high strength bioactive glass scaffolds. Vienna Young Scientists Symposium (VSS) 2015, Wien, Austria. http://hdl.handle.net/20.500.12708/94195 ( reposiTUm)
Dorfinger, P., Liska, R., & Stampfl, J. (2015). Toughening of Photopolymers for Stereolithography (SL). Polymer Processing Society Conference 2015, Graz, Austria. http://hdl.handle.net/20.500.12708/94191 ( reposiTUm)
Stampfl, J. (2015). High performance materials for lithography based additive manufacturing. Add+It, Linz, Austria. http://hdl.handle.net/20.500.12708/94136 ( reposiTUm)
Gmeiner, R., Steyrer, B., Samusjew, A., Mautner, A., Liska, R., & Stampfl, J. (2015). Stereolithographic Manufacturing of Biodegradable Photopolymers. Polymer Processing Society Conference 2015, Graz, Austria. http://hdl.handle.net/20.500.12708/94231 ( reposiTUm)
Baudis, S., Tomasikova, Z., Qin, X., Gruber, P., Markovic, M., Stampfl, J., Ovsianikov, A., & Liska, R. (2015). Cell Encapsulation by Microfabrication with Hyaluronic Acid based Hydrogel Precursors. International Conference on Biofabrication 2015, Utrecht, Netherlands (the). http://hdl.handle.net/20.500.12708/94272 ( reposiTUm)
Pfaffinger, M., Mitteramskogler, G., Kaslioglu, Ö., & Stampfl, J. (2015). Stereolithographic Additive Manufacturing of Tricalcium Phosphate. EURO BioMAT 2015, Weimar, Germany. http://hdl.handle.net/20.500.12708/94160 ( reposiTUm)
Gmeiner, R., Pfaffinger, M., & Stampfl, J. (2015). Dental ceramic restorations fabricated by lithography-based additive manufacturing. 23rd European Dental Materials Conference, Nürnberg, Germany. http://hdl.handle.net/20.500.12708/94230 ( reposiTUm)
Schönherr, J.-A., Gmeiner, R., Boccaccini, A. R., & Stampfl, J. (2015). Lithography-based Additive Manufacturing of High Strength Bioactive Glass and Glass Ceramics for Medical Applications. EURO BioMAT 2015, Weimar, Germany. http://hdl.handle.net/20.500.12708/94190 ( reposiTUm)
Schönherr, J.-A., Pfaffinger, M., Gmeiner, R., Boccaccini, A., & Stampfl, J. (2015). Generative Herstellung hochfester Biogläser und Biokeramiken für medizinische Anwendungen. Medica, Düsseldorf, Germany. http://hdl.handle.net/20.500.12708/94192 ( reposiTUm)
Schönherr, J.-A., Gmeiner, R., Boccaccini, A., & Stampfl, J. (2015). Additive Herstellung hochfester Biogläser und Biokeramiken für medizinische Anwendungen. Rapid.Tech 2015, Erfurt, Germany. http://hdl.handle.net/20.500.12708/94193 ( reposiTUm)
Stampfl, J. (2014). 3D-Druck mit Licht: Verfahren und Werkstoffe. Vorarlberger Techniktag 2014, Dornbirn, Austria. http://hdl.handle.net/20.500.12708/93807 ( reposiTUm)
Stampfl, J. (2014). 3D Druck in der Medizin: Von A(bbaubare Biomaterialien) bis Z(weiphotonenlithographie). Print3DFuture, Wien, Austria. http://hdl.handle.net/20.500.12708/93822 ( reposiTUm)
Gruber, P., Markovic, M., Hölzl, K., Tromayer, M., van Vlierberghe, S., Dubruel, P., Liska, R., Stampfl, J., & Ovsianikov, A. (2014). Laser Photofabrication of Cell-Containing Hydrogel Constructs. 3rd European Symposium of Photopolymer Science 2014, Vienna, Austria. http://hdl.handle.net/20.500.12708/94864 ( reposiTUm)
Bomze, D., Schwarz, V., Husar, B., Qin, X., Gruber, P., Ovsianikov, A., Stampfl, J., & Liska, R. (2014). Novel low-toxic PVA based hydrogel precursors for tissue engineering based on thiol-ene crosslinking. P2M Winter School, Zakopane, Poland. http://hdl.handle.net/20.500.12708/99366 ( reposiTUm)
Stampfl, J. (2014). Lithography-based 3D-structuring of biomaterials. 2nd Erlangen Symposium on Biomaterials, Erlangen, Germany. http://hdl.handle.net/20.500.12708/93920 ( reposiTUm)
Stampfl, J. (2014). Phocam - Impact and exploitation. Impact Workshop - Factory of the Future, Brüssel, Belgium. http://hdl.handle.net/20.500.12708/93823 ( reposiTUm)
Ligon, S., Tromayer, M., Li, Z., Torgersen, J., Ajami, A., Rosspeintner, A., Naumov, S., Scherzer, T., Stampfl, J., & Liska, R. (2014). New Developments in Initiators for Two-Photon Polymerization. RadTech USA 2014, Chicago, United States of America (the). http://hdl.handle.net/20.500.12708/99372 ( reposiTUm)
Husar, B., Mautner, A., Varga, F., Stampfl, J., & Liska, R. (2014). An overview on low cytotoxic alternatives to (meth)acrylates: vinyl esters and vinyl carbonates. RadTech USA 2014, Chicago, United States of America (the). http://hdl.handle.net/20.500.12708/99370 ( reposiTUm)
Gmeiner, R., Panaitescu, I., Mitteramskogler, G., Wojak, J., Stampfl, J., & Boccaccini, A. (2014). Lithography-Based Additive Manufacturing of Bioactive Glass Ceramics. MSE 2014, Darmstadt, Germany. http://hdl.handle.net/20.500.12708/93927 ( reposiTUm)
Qin, X., Husar, B., Torgersen, J., Mühleder, S., Redl, H., Holnthoner, W., Stampfl, J., Ovsianikov, A., & Liska, R. (2013). Two-photon polymerization for biodegradable 3D hydrogels scaffolds. RadTech Asia 2013, Shanghai, Non-EU. http://hdl.handle.net/20.500.12708/99066 ( reposiTUm)
Mitteramskogler, G., Felzmann, R., Gruber, S., Stampfl, J., Ebert, Wachter, W., & Laubersheimer, J. (2013). Light Curing Strategies for Lithography-Based Additive Manufacturing of Customized Ceramics. EUROMAT 2013, Sevilla, EU. http://hdl.handle.net/20.500.12708/93672 ( reposiTUm)
Stampfl, J. (2013). 3D-Druck in der industriellen Anwendung - Herausforderungen an die Materialwissenschaft. 11. Internationaler Leobener Logistik Sommer, Leoben, Austria. http://hdl.handle.net/20.500.12708/93675 ( reposiTUm)
Stampfl, J. (2013). Über Länge mal Breite hinaus - der Weg zum dreidimensionalen Druck. 3D-Druck - Motor für die nächste industrielle Revolution, Linz, Austria. http://hdl.handle.net/20.500.12708/93602 ( reposiTUm)
Stampfl, J. (2013). Photopolymerizable Hydrogels for Lithography-Based Additive Manufacturing. 533. WE-Heraeus-Seminar Advanced Functional Polymers for Medicine, Bad Honnef, EU. http://hdl.handle.net/20.500.12708/93603 ( reposiTUm)
Stampfl, J. (2013). Lithography based additive manufacturing of high-performance ceramic parts. Ajankohtaisseminaari ja 3D-tulostus näyttely, Helsinki, EU. http://hdl.handle.net/20.500.12708/93604 ( reposiTUm)
Stampfl, J. (2013). Lithography based additive manufacturing of ceramic parts. Biobone Workshop, Erlangen, EU. http://hdl.handle.net/20.500.12708/93575 ( reposiTUm)
Gmeiner, R., Fantino, E., Steyrer, B., Samusjew, A., Husar, B., Liska, R., & Stampfl, J. (2013). Additive Manufacturing of Filled and Unfilled Bio-Photopolymers. In BioNanoMaterials. Jahrestagung der Deutschen Gesellschaft für Biomaterialien 2013, Erlangen, EU. Bionanomaterials/de Gruyter. http://hdl.handle.net/20.500.12708/66884 ( reposiTUm)
Husar, B., Mautner, A., Heller, C., Schwentenwein, M., Varga, F., Koch, T., Macfelda, K., Russmüller, G., Stampfl, J., & Liska, R. (2012). Vinyl esters and vinyl carbonates: low cytotoxic alternatives to (meth)acrylates. ESF Research Networking Programme on Precision Polymer Materials (P2M), San Feliu de Guixols, EU. http://hdl.handle.net/20.500.12708/99116 ( reposiTUm)
Ligon, S., Husar, B., Baudis, S., Nehl, F., Nigisch, A., Bergmeister, H., Bernhard, D., Stampfl, J., & Liska, R. (2012). Improved elastomeric materials for CAD/CAM generation of vascular structures in soft tissue replacement therapies. The 3#^{rd} TERMIS World Congress 2012, Vienna, Austria. http://hdl.handle.net/20.500.12708/98919 ( reposiTUm)
Mitteramskogler, G., Gmeiner, R., Pfaffinger, M., & Stampfl, J. (2012). Lithography-based Additive Manufacturing of Parts Made of Zirconia. MSE 2014, Darmstadt, EU. http://hdl.handle.net/20.500.12708/93903 ( reposiTUm)
Husar, B., Mautner, A., Heller, C., Schwentenwein, M., Varga, F., Koch, T., Macfelda, K., Russmüller, G., Stampfl, J., & Liska, R. (2012). Utilization of photopolymerization of new low toxic vinyl monomers in bone tissue engineering. The 3#^{rd} TERMIS World Congress 2012, Vienna, Austria. http://hdl.handle.net/20.500.12708/98926 ( reposiTUm)
Ajami, A., Li, Z., Ovsianikov, A., Torgersen, J., Stampfl, J., & Husinsky, W. (2012). Effect of Concentration of Chromophores on Two-photon Absorption Cross Section. 50 years of nonlinear optics, NLO 50 International Symposium, Barcelona/Spain, EU. http://hdl.handle.net/20.500.12708/130246 ( reposiTUm)
Stampfl, J. (2012). Status und Anwendungsperspektiven für abbaubare Biophotopolymere und Zweiphotonenlithographie. 1. Öffentlicher Workshop des Wachstumskernes BASIS, Erfurt, EU. http://hdl.handle.net/20.500.12708/93325 ( reposiTUm)
Stampfl, J., Torgersen, J., Ovsianikov, A., Qin, X., Zhiquan, L., Mironov, V., & Liska, R. (2012). Photo-sensitive Biocompatible Hydrogels Structuring Extracellular Environments by Two Photon Polymerisation. 2012 MRS Spring Meeting & Exhibit, San Francisco, CA, USA, Non-EU. http://hdl.handle.net/20.500.12708/93440 ( reposiTUm)
Ovsianikov, A., Torgersen, J., Qin, X., Li, Z., Mühleder, S., Holnthoner, W., Redl, H., Liska, R., & Stampfl, J. (2012). Laser fabrication of cell-containing hydrogel constructs. International Conference on Biofabrication 2012, Manchester, United Kingdom of Great Britain and Northern Ireland (the). http://hdl.handle.net/20.500.12708/93495 ( reposiTUm)
Torgersen, J., Ovsianikov, A., Mironov, V., Pucher, N. U., Qin, X., Li, Z., Cicha, K., Machacek, T., Jantsch-Plunger, V., Liska, R., & Stampfl, J. (2012). High Speed 3D laser micro-fabrication of biocompatible hydrogel scaffolds. CAIM III Tercier Congreso Argentino die Engereía Mécanica, Buenos Aires, Non-EU. http://hdl.handle.net/20.500.12708/93392 ( reposiTUm)
Mautner, A., Qin, X., Macfelda, K., Russmüller, G., Stampfl, J., & Liska, R. (2011). Vinyl carbonates, a new generation of low toxic monomers. 1#^{st} P2M Networking Conference, Obernai, F, EU. http://hdl.handle.net/20.500.12708/98698 ( reposiTUm)
Seidler, K., Baudis, S., Ligon, S., Grasl, C., Arras, M., Schima, H., Bergmeister, H., Winter, B., Koch, T., Stampfl, J., & Liska, R. (2011). Biocompatible and biodegradable thermoplastic urethane Elastomers for electrospinning of vascular grafts. 1#^{st} P2M Networking Conference, Obernai, F, EU. http://hdl.handle.net/20.500.12708/98696 ( reposiTUm)
Cicha, K., Li, Z., Stadlmann, K., Torgersen, J., Markut-Kohl, R., Liska, R., & Stampfl, J. (2011). Fabrication and evaluation of 3D-micro-structures produced using two-photon-induced photopolymerization (TPIP or 2PP) by means of optical assessment and FTIR-spectroscopy. 16. Tagung Festkörperanalytik, Wien, Austria. http://hdl.handle.net/20.500.12708/93141 ( reposiTUm)
Stampfl, J. (2011). Mechanische Eigenschaften und Abbauverhalten von Biophotopolymeren für die generative Fertigung. 13. Problemseminar Deformation und Bruchverhalten von Kunststoffen, Halle-Merseburg, EU. http://hdl.handle.net/20.500.12708/93229 ( reposiTUm)
Stampfl, J. (2011). Additive Manufacturing of photopolymer-based scaffolds. Sino-German Symposium “Multifunctional Biomaterials and polymer-based controlled drug-release systems,” Berlin, EU. http://hdl.handle.net/20.500.12708/93225 ( reposiTUm)
Stampfl, J. (2010). Materials for lithography-based additive manufacturing technologies. Erich-Schmid-Kolloquium, Erich Schmid Institut, ÖAW, Leoben, Austria. http://hdl.handle.net/20.500.12708/93135 ( reposiTUm)
Schwentenwein, M., Heller, C., Qin, X., Varga, F., Stampfl, J., & Liska, R. (2010). Additive Manufacturing Technologies for 3D Fabrication of Biocompatible and Biodegradable Photopolymers. Materials Science and Engineering, Nürnberg, Germany. http://hdl.handle.net/20.500.12708/98447 ( reposiTUm)
Kumpfmüller, J., Inführ, R., Stadlmann, K., Cicha, K., Satzinger, V., Stampfl, J., & Liska, R. (2010). Flexible Optical WaveGuides via Two-Photon Polymerization. Materials Science and Engineering, Nürnberg, Germany. http://hdl.handle.net/20.500.12708/98446 ( reposiTUm)
Qin, X., Heller, C., Schwentenwein, M., Varga, F., Russmüller, G., Stampfl, J., & Liska, R. (2010). New Bio-photopolymers with good biocompatibility for Tissue Engineering. Materials Science and Engineering, Nürnberg, Germany. http://hdl.handle.net/20.500.12708/98449 ( reposiTUm)
Li, Z., Siklos, M. I., Pucher, N. U., Cicha, K., Ajami, A., Husinsky, W., Stampfl, J., & Liska, R. (2010). Synthesis and Structure-Activity Relationship of Several Novel Two-Photon Initiators based on a D-pi-A-pi-D Chromophore. Materials Science and Engineering, Nürnberg, Germany. http://hdl.handle.net/20.500.12708/98448 ( reposiTUm)
Baudis, S., Pulka, T., Steyrer, B., Wilhelm, H., Weigel, G., Bergmeister, H., Stampfl, J., & Liska, R. (2009). 3D-printing of Urethane-based Photoelastomers for Vascular Tissue Regeneration. MRS Fall Meeting 2009, Boston, MA, USA, Non-EU. http://hdl.handle.net/20.500.12708/98214 ( reposiTUm)
Heller, C., Schwentenwein, M., Stampfl, J., Varga, F., Liska, R., Porodec, M., Schulz-Siegmund, M., & Russmüller, G. (2009). Additive Manufacturing Technologies for the 3D Fabrication of Biocompatible and Biodegradable Photopolymers. MRS Fall Meeting 2009, Boston, MA, USA, Non-EU. http://hdl.handle.net/20.500.12708/98215 ( reposiTUm)
Stampfl, J. (2009). Generative Fertigung und Werkstoffprüfung von Polymeren und Keramiken für die Biomedizin. 7. Werkstoffkongress, Leoben, Austria. http://hdl.handle.net/20.500.12708/92848 ( reposiTUm)
Stampfl, J. (2009). Generative Fertigung - Entwicklungstrends von A(bbaubaren Werkstoffen für die Medizin) bis Z(weiphotonenlithographie). Rapid Prototyping - Vorsprung durch flexible Produktentwicklung, Hallein, Austria. http://hdl.handle.net/20.500.12708/92751 ( reposiTUm)
Hohlrieder, M., Cicha, K., Stampfl, J., Teuschl, A., & Redl, H. (2009). Bioreactor for the biaxial mechanical stimulation of silk based cruciate ligament grafts. 22nd European Conference on Biomaterials, Lausanne, Schweiz, Non-EU. http://hdl.handle.net/20.500.12708/92787 ( reposiTUm)
Pettermann, H. E., Luxner, M., & Stampfl, J. (2009). Architecture-Property Correlation of Open Cell Materials by Nonlinear FEM Simulations. EUROMAT 2009, Glasgow, EU. http://hdl.handle.net/20.500.12708/92786 ( reposiTUm)
Bashir, S., Ajami, A., Rafique, M. S., Husinsky, W., Pucher, N., Liska, R., Inführ, R., Lichtenegger, H., & Stampfl, J. (2008). Z-scan measurement of two-photon absorption for ultra short laser radiation. 15 Intern. School on Quantum Electronics “Laser Physics and Applications”, Burgas/Bulgarien, EU. http://hdl.handle.net/20.500.12708/127119 ( reposiTUm)
Porodec, M., Heller, C., Liska, R., Stampfl, J., Hacker, M., & Schulz-Siegmund, M. (2008). Covalent Modification of Photo-cross-linkable Polymers for Bone Tissue Engineering Using a Model Protein. International Workshop on Biomacromolecules 2008 - Renewable, Degradable and Biomedical Polymers, Stockholm/ Schweden, EU. http://hdl.handle.net/20.500.12708/92569 ( reposiTUm)
Pettermann, H. E., García Vallejo, D., Stampfl, J., Luxner, M., & Domínguez, J. (2008). Viskoelastische Eigenschaften von zellulären Strukturen. 3. Wiener Biomaterialsymposium, TU Wien, Austria. http://hdl.handle.net/20.500.12708/92603 ( reposiTUm)
Stampfl, J. (2008). Herstellung von optischen Wellenleitern mit 2-Photonenpolymerisation. Euromold 2008 - Forum Werkstoffe, Frankfurt am Main, EU. http://hdl.handle.net/20.500.12708/92631 ( reposiTUm)
Gäbler, S., Koch, T., Stampfl, J., Seidler, S., Heller, C., Baudis, S., Liska, R., & Weidisch, R. (2008). Determination of the Viscoelastic Properties of Hydrogels based on Polyethylene Glycol Diacrylate (PEG-DA). Materials Science and Engineering - MSE 2008, Nürnberg, EU. http://hdl.handle.net/20.500.12708/92552 ( reposiTUm)
Pettermann, H. E., García Vallejo, D., Stampfl, J., Luxner, M., & Domínguez, J. (2008). Viscoelastic Properties of Open Cell Kelvin Foams. Ictam 2008, Adelaide, Non-EU. http://hdl.handle.net/20.500.12708/92572 ( reposiTUm)
Inführ, R., Pucher, N. U., Lichtenegger, H. C., Liska, R., Schmidt, V., Satzinger, V., & Stampfl, J. (2008). Refractive Index Patterning of Flexible Waveguide Materials by Two-Photon Polymerization. Materials Science and Engineering - MSE 2008, Nürnberg, EU. http://hdl.handle.net/20.500.12708/92584 ( reposiTUm)
Homa, J., Zellhofer, S., & Stampfl, J. (2008). Material Properties Of Gel-cast Rsic For Cross Flow Diesel Particulate Filters. Materials Science and Engineering, Nürnberg, Deutschland, EU. http://hdl.handle.net/20.500.12708/92571 ( reposiTUm)
Pucher, N. U., Heller, C., Seidl, B., Inführ, R., Kuna, L., Haase, A., Schmidt, V., Lichtenegger, H. C., Stampfl, J., & Liska, R. (2007). New alkyne-based initiators for single- ad two-photon-induced photopolymerization. 2007 MRS Spring Meeting, San Francisco, Non-EU. http://hdl.handle.net/20.500.12708/92346 ( reposiTUm)
Schuster, M., Turecek, C., Varga, F., Lichtenegger, H. C., Stampfl, J., & Liska, R. (2007). Development of bone replacement materials using stereolithography. MRS Spring Meeting 2009, San Francisco, United States of America (the). http://hdl.handle.net/20.500.12708/92347 ( reposiTUm)
Luxner, M., Stampfl, J., & Pettermann, H. E. (2007). Disordered Open Cell Structures: Elasto-Plastic Behavior and Defect Sensitivity. McMAT 2007 - ASME Applied Mechanics and Materials Conference, Austin, TX, Non-EU. http://hdl.handle.net/20.500.12708/92350 ( reposiTUm)
Stampfl, J. (2007). 3D-Strukturierung biofunktioneller Photopolymere. Kolloquium zur Muskuloskeletalen Regeneration, Berlin, EU. http://hdl.handle.net/20.500.12708/92368 ( reposiTUm)
Schuster, M., Turecek, C., Varga, F., Stampfl, J., & Liska, R. (2007). 3D-shaping of biodegradable photopolymers for hard tissue replacement. EMRS Spring Meeting 2007, Strasbourg, France, EU. http://hdl.handle.net/20.500.12708/97621 ( reposiTUm)
Inführ, R., Pucher, N. U., Heller, C., Lichtenegger, H. C., Liska, R., Schmidt, V., Kuna, L., Haase, A., & Stampfl, J. (2007). Functional Polymers Structured by Two Photon Lithography. EMRS Spring Meeting 2007, Strasbourg, France, EU. http://hdl.handle.net/20.500.12708/97622 ( reposiTUm)
Homa, J., & Stampfl, J. (2007). Direct and Indirect Fabrication of Ceramic Prototypes Using Rapid Prototyping. Euromat 2007, Nürnberg, Deutschland, EU. http://hdl.handle.net/20.500.12708/92372 ( reposiTUm)
Liska, R., Schuster, M., Inführ, R., Turecek, C., Pucher, N. U., Heller, C., Seidl, B., Fritscher, C., Kuna, L., Haase, A., Schmidt, V., Lichtenegger, H. C., Varga, F., & Stampfl, J. (2007). Single- and Two-Photon Initiated Polymerization in Rapid Prototyping. 2007 MRS Spring Meeting, San Francisco, Non-EU. http://hdl.handle.net/20.500.12708/92481 ( reposiTUm)
Inführ, R., Stampfl, J., Pucher, N., Lichtenegger, H. C., Liska, R., Schmidt, V., Kuna, L., & Haase, A. (2007). Functional Polymers Structured by Two Photon Lithography. E-MRS European Materials Research Society - Spring Meeting 2007, Strasbourg/ France, EU. http://hdl.handle.net/20.500.12708/92450 ( reposiTUm)
Stampfl, J. (2007). Biofunktionelle Photopolymere für die Stereolithographie. Werkstoff-Forum der EUROMOLD, Frankfurt, Germany, EU. http://hdl.handle.net/20.500.12708/92473 ( reposiTUm)
Homa, J., & Stampfl, J. (2006). Fabrication of Cellular Ceramics Structures by Gel-Casting and Rapid Prototyping. Junior Euromat 2006, Lausanne, CH, Non-EU. http://hdl.handle.net/20.500.12708/92196 ( reposiTUm)
Luxner, M., Stampfl, J., Woesz, A., Fratzl, P., & Pettermann, H. E. (2006). Influence of Defects and Perturbations on the Performance of 3D Open Cell Structures. 3rd European Conference on Computational Mechanics (ECCM 2006), Lissabon, EU. http://hdl.handle.net/20.500.12708/92173 ( reposiTUm)
Turecek, C., Schuster, M., Varga, F., Liska, R., Kaiser, B., Stampfl, J., & Klaushofer, K. (2006). Evaluation and influence of photopolymers, capable for rapid prototyping, on the adhesion, proliferation and differentiation of osteoblasts. 33rd European Symposium on Calcified Tissues, Prag, EU. http://hdl.handle.net/20.500.12708/92168 ( reposiTUm)
Stampfl, J. (2006). Innovative Materialien für die Stereolithographie. Werkstoff-Forum der EUROMOLD, Frankfurt, Germany, EU. http://hdl.handle.net/20.500.12708/92299 ( reposiTUm)
Inführ, R., Fritscher, C., Schmidt, V., Kuna, L., Liska, R., Lichtenegger, H. C., & Stampfl, J. (2006). Structuring Methods Capable of Building 3D Parts with Feature Resolutions from 50 µm to 100 nm. Junior Euromat 2006, Lausanne, CH, Non-EU. http://hdl.handle.net/20.500.12708/92274 ( reposiTUm)
Pettermann, H. E., Luxner, M., Woesz, A., Fratzl, P., & Stampfl, J. (2006). Modellierung und Simulation offenzelliger biomimetischer Strukturen - Elasto-Plastizität und Kollaps versus Unordnung und Defekte. 2. Wiener Biomaterialsymposium, Wien, Österreich, Austria. http://hdl.handle.net/20.500.12708/92245 ( reposiTUm)
Inführ, R., Fritscher, C., Schmidt, V., Kuna, L., Liska, R., Lichtenegger, H. C., & Stampfl, J. (2006). Structuring Methods Capable of Building 3D Parts with Feature Resolutions from 50 µm to 100 nm. Junior Euromat, Lausanne, Austria. http://hdl.handle.net/20.500.12708/97318 ( reposiTUm)
Schuster, M., Turecek, C., Kaiser, B., Varga, F., Stampfl, J., & Liska, R. (2006). Biophotopolymers for Rapid Prototyping of Cellular Bone Replacement Materials. Junior Scientist Conference, Wien, Austria. http://hdl.handle.net/20.500.12708/97280 ( reposiTUm)
Stampfl, J. (2005). Rapid Prototyping: 3D-Strukturierung multihierarchischer Nano- und Biomaterialien. Seminar “Moderne Analytische Chemie”, Institut für chemische Technologien und Analytik, TU Wien, Austria. http://hdl.handle.net/20.500.12708/91965 ( reposiTUm)
Stampfl, J., Liska, R., Spitzbart, M., Fischer, S., & Noll, H. (2005). 3D-Mikrostrukurerung funktionaler Materialien. Mikrotechniktage Dornbirn 2005, Dornbirn, Austria. http://hdl.handle.net/20.500.12708/92129 ( reposiTUm)
Stampfl, J. (2005). Rapid Prototyping zellularer Materialien. Seminar Institut für Pharmazeutische Technologie, Graz, Austria. http://hdl.handle.net/20.500.12708/92128 ( reposiTUm)
Lichtenegger, H. C., Liska, R., & Stampfl, J. (2005). STRUCMAT- Materialien für die Strukturierung mit 2-Photonenlithographie (TPA). ISOTEC-Kickoff-Meeting, Reinischkogel, Österreich, Austria. http://hdl.handle.net/20.500.12708/92147 ( reposiTUm)
Luxner, M., Stampfl, J., & Pettermann, H. E. (2005). Nonlinear Behavior of Regular and Irregular Open Cell Structures. Euromech Colloquium 466 “Computational and Experimental Mechanics of Advanced Materials,” Loughborough, EU. http://hdl.handle.net/20.500.12708/92066 ( reposiTUm)
Luxner, M., Stampfl, J., & Pettermann, H. E. (2005). Nonlinear Behavior of 3D Regular and Irregular Open Cell Structures. Third M.I.T. Conference on Computational Fluid and Solid Mechanics, Cambridge, MA, Non-EU. http://hdl.handle.net/20.500.12708/92051 ( reposiTUm)
Stampfl, J. (2005). Rapid Prototyping - aktuelle Anwendungen und Trends. Technologie und Gründerforum RIZ Waidhofen, Waidhofen, Austria. http://hdl.handle.net/20.500.12708/92130 ( reposiTUm)
Stampfl, J., Spitzbart, M., Noll, H., & Fischer, S. (2005). Rapid Prototyping - Fertigungsverfahren der Mikrotechnik. Kunststoffcluster Niederösterreich - Mikrosystemtechnik, Wr. Neustadt, Austria. http://hdl.handle.net/20.500.12708/92131 ( reposiTUm)
Inführ, R., Liska, R., Lichtenegger, H. C., Fritscher, C., Stampfl, J., & Hüsing, N. (2005). 3D Lithography of Organo-Soluble Mold Materials for Sol-Gel Nanocomposites. RadTech Europe 2005, Barcelona, Spain, Austria. http://hdl.handle.net/20.500.12708/96933 ( reposiTUm)
Schuster, M., Chen, S.-X., Liska, R., Turecek, C., Varga, F., & Stampfl, J. (2005). Photopolymerizable Biopolymers for Rapid Prototyping of Cellular Bone Repleacement Meterials. RadTech Europe 2005, Barcelona, Spain, Austria. http://hdl.handle.net/20.500.12708/96934 ( reposiTUm)
Schuster, M., Chen, S.-X., Liska, R., Rumpler, M., Turecek, C., Varga, F., & Stampfl, J. (2005). Development of Biodegradable Photopolymers for Bone Tissue Engineering. RadTech Europe 2005, Barcelona, Spain, Austria. http://hdl.handle.net/20.500.12708/96932 ( reposiTUm)
Luxner, M., Stampfl, J., & Pettermann, H. E. (2005). Nichtlineare Simulation dreidimensionaler offenzelliger Strukturen mit regelmäßigen und gestörten Geometrien. Workshop Simulation von Schaumstoffen mit stark nichtlinearem Verhalten, Hohenwart, Deutschland, EU. http://hdl.handle.net/20.500.12708/92070 ( reposiTUm)
Stampfl, J. (2004). Rapid Prototyping von zellulären Biomaterialien. 2. Life Science Meeting “Aktuelle Trend in Forschung, Anwendung und Ausbildung,” Krems, Austria. http://hdl.handle.net/20.500.12708/91892 ( reposiTUm)
Fritscher, C., Lichtenegger, H. C., Stampfl, J., Hüsing, N., Liska, R., & Seidler, S. (2004). Fabrication of bio-inspired ceramic composites. Micro-mechanical properties of biomaterials, ECI-Conference, Tomar, Portugal, Austria. http://hdl.handle.net/20.500.12708/91964 ( reposiTUm)
Stampfl, J. (2004). Rapid Prototyping und Modellierung zellularer Materialien. Seminarvortrag Universität für Bodenkultur, Wien, Austria. http://hdl.handle.net/20.500.12708/91966 ( reposiTUm)
Stampfl, J. (2004). 3D-Techniken in der Materialkunde. Habilitationskolloquium, Wien, Austria. http://hdl.handle.net/20.500.12708/91967 ( reposiTUm)
Stampfl, J. (2004). Rapid Prototyping of Biomaterials. National Taiwan University of Science and Technology, Taipeh, Austria. http://hdl.handle.net/20.500.12708/91968 ( reposiTUm)
Stampfl, J. (2004). Solid freeform fabrication of cellular materials – mechanical properties and new photopolymers. Micro-mechanical properties of biomaterials, ECI-Conference, Tomar, Portugal, Austria. http://hdl.handle.net/20.500.12708/91972 ( reposiTUm)
Fritscher, C., Lichtenegger, H. C., Stampfl, J., Hüsing, N., Liska, R., & Seidler, S. (2004). Fabrication of bio-inspired ceramic composites. Junior Euromat 2004, Lausanne, Switzerland, Austria. http://hdl.handle.net/20.500.12708/91963 ( reposiTUm)
Fritscher, C., Lichtenegger, H. C., Stampfl, J., Hüsing, N., Liska, R., & Seidler, S. (2004). Fabrication of bio-inspired ceramic composites. Micro-Mechanical Properties of Biomaterials, Tomar, Portugal, Austria. http://hdl.handle.net/20.500.12708/96609 ( reposiTUm)
Lichtenegger, H. C., Stampfl, J., Hüsing, N., Liska, R., & Seidler, S. (2004). Fabrication of bio-inspired ceramic composites. EUROMAT 2004, Lausanne, Schweiz, Austria. http://hdl.handle.net/20.500.12708/96610 ( reposiTUm)
Lichtenegger, H. C., Fritscher, C., Stampfl, J., Seidler, S., Hüsing, N., & Liska, R. (2004). 3-D templating of hierarchical materials. MRS Spring Meeting, San Francisco, United States of America (the). http://hdl.handle.net/20.500.12708/96571 ( reposiTUm)
Stampfl, J., Seidler, S., Wöß, A., & Fratzl, P. (2003). Rapid Protoyping zellularer Materialien. 49. Metallkundekolloquium: Werkstoffe - Einsatz und Entwicklungstendenzen, Leoben, Austria. http://hdl.handle.net/20.500.12708/91615 ( reposiTUm)
Stampfl, J. (2003). Rapid Prototyping - Märkte und Zukunftschancen, Impulsveranstaltung “Fertigungs- und Prozessoptimierung.” TZS Gmunden, Gmunden, Austria. http://hdl.handle.net/20.500.12708/91761 ( reposiTUm)
Rumpler, M., Wöß, A., Varga, F., Stampfl, J., Fratzl-Zelman, N., Roschger, P., Fratzl, P., & Klaushofer, K. (2003). Porous hydroxyapatite scaffolds constructed by microstereolithography are suitable substrates for osteoblasts. Progress in Bone and Mineral Reseach 2003, Wien, Austria. http://hdl.handle.net/20.500.12708/91764 ( reposiTUm)
Stampfl, J. (2003). Rapid Prototyping zellularer Materialien. MPI für Grenzflächen- und Kolloidforschung, Potsdam, D, Austria. http://hdl.handle.net/20.500.12708/91762 ( reposiTUm)
Stampfl, J. (2003). Rapid Prototyping of cellular materials. ETH Zürich, Austria. http://hdl.handle.net/20.500.12708/91763 ( reposiTUm)
Stampfl, J. (2003). Neue Werktoffe für Rapid Prototyping. Trends und Innovationen am Rapid Prototyping Sektor, Waidhofen/Ybbs, Austria. http://hdl.handle.net/20.500.12708/91677 ( reposiTUm)
Stampfl, J. (2002). Formgebung metallischer und nichtmetallischer Werkstoffe mit Rapid Prototyping. 5. Materialphysikalisches Symposium, Seggau, Austria. http://hdl.handle.net/20.500.12708/91509 ( reposiTUm)

Berichte

Pfaffinger, M., Dorfinger, P., & Stampfl, J. (2014). Stereolithographic Manufacturing of Ceramics and Metals. http://hdl.handle.net/20.500.12708/38274 ( reposiTUm)
Gruber, S., Stampfl, J., Felzmann, R., Springer, S., & Liska, R. (2011). Lithographiebasierte Fertigung keramischer Bauteile (ISSN: 1614-0923). http://hdl.handle.net/20.500.12708/37037 ( reposiTUm)
Seidler, S., & Stampfl, J. (2005). Materialanalyse und Fraktographie an einem keramischen Insert für die Hüftendoprothese. http://hdl.handle.net/20.500.12708/34643 ( reposiTUm)
Stampfl, J. (2002). Zwischenbericht zur Prüfung der mechanischen Eigenschaften von Mediphorem Knochenmaterial. http://hdl.handle.net/20.500.12708/34400 ( reposiTUm)

Preprints

Göschl, M., Laa, D., Koch, T., Constable, E., Pimenov, A., Stampfl, J., Liska, R., & Ehrmann, K. (2025). Two for one: Semi-crystalline and amorphous materials via multi-temperature 3D printing from one formulation. ChemRxiv. https://doi.org/10.34726/10479 ( reposiTUm)
Ahmadi, M., Ehrmann, K., Göschl, M., Koch, T., Liska, R., & Stampfl, J. (2024). Photopolymerization Induced Phase Separation in (Meth)Acrylate-Based Photopolymers from a Characterization Point of View. ( reposiTUm)
Göschl, M., Laa, D., Ahmadi, M., Koch, T., Stampfl, J., Ehrmann, K., & Liska, R. (2024). Trapping crystallinity in highly crosslinked thermosets by light-based 3D printing from the liquid crystalline phase. ChemRxiv. https://doi.org/10.34726/10499 ( reposiTUm)

Multimedia & Design

Ecker, J., Liska, R., & Stampfl, J. (2024). Design for Disassembly: Using a multi-material approach in 3D printing for easier recycling strategies [Video]. Technische Universität Wien. ( reposiTUm)

Hochschulschriften

Stampfl, J. (2004). 3D-techniques in materials science : Habilitationsschrift [Professorial Dissertation, Technische Universität Wien]. reposiTUm. http://hdl.handle.net/20.500.12708/182593 ( reposiTUm)