Rauchenwald, K., Shirvani, R., Edtmaier, T., Steiger, M., & Konegger, T. (2025). Freeze-cast SiOC ceramics supporting the growth of industrially relevant microorganisms. PLoS ONE, 20(6), e0325311. https://doi.org/10.1371/journal.pone.0325311 ( reposiTUm)

Miksovsky, P., Rauchenwald, K., Naghdi, S., Rabl, H., Eder, D., Konegger, T., & Schröder, K. (2024). Silicon Oxycarbide (SiOC)-Supported Ionic Liquids: Heterogeneous Catalysts for Cyclic Carbonate Formation. ACS Sustainable Chemistry & Engineering, 12(4), 1455–1467. https://doi.org/10.1021/acssuschemeng.3c05569 ( reposiTUm)

Rakngam, I., Andrade Silva Alves, G., Osakoo, N., Wittayakun, J., Konegger, T., & Föttinger, K. (2024). Correction: Hydrothermal synthesis of ZnZrOₓ catalysts for CO₂ hydrogenation to methanol: the effect of pH on structure and activity. RSC Sustainability, 2(12), 4061–4061. https://doi.org/10.1039/d4su90059f ( reposiTUm)

Rakngam, I., Andrade Silva Alves, G., Osakoo, N., Wittayakun, J., Konegger, T., & Föttinger, K. (2024). Hydrothermal synthesis of ZnZrOₓ catalysts for CO₂ hydrogenation to methanol: the effect of pH on structure and activity. RSC Sustainability, 2(12), 3798–3805. https://doi.org/10.1039/d4su00522h ( reposiTUm)

Cassetta, M., Peterlik, H., Konegger, T., Daldosso, N., Sorarù, G. D., & Biesuz, M. (2024). Microporosity evolution in polymer‐derived SiOC glasses pyrolyzed in different atmospheres. Journal of the American Ceramic Society. https://doi.org/10.1111/jace.19816 ( reposiTUm)

Szoldatits, E. M., Eßmeister, J. G., Schachtner, L., Konegger, T., & Föttinger, K. (2023). Polymer-derived SiOC as support material for Ni-based catalysts: CO2 methanation performance and effect of support modification with La2O3. Frontiers in Chemistry, 11, Article 1163503. https://doi.org/10.3389/fchem.2023.1163503 ( reposiTUm)

Essmeister, J., Fuchsberger, A., Steiner, D., Schwarz, S., Schachinger, T., Lale, A., Schwentenwein, M., Föttinger, K., & Konegger, T. (2023). Hierarchically Porous Ceramic and Metal‐Ceramic Hybrid Materials Structured by Vat Photopolymerization‐Induced Phase Separation. Advanced Materials Technologies, 9(1), Article 2301400. https://doi.org/10.1002/admt.202301400 ( reposiTUm)

Essmeister, J., Schachtner, L., Szoldatits, E. M., Schwarz, S., Lichtenegger, A., Baumann, B., Föttinger, K., & Konegger, T. (2023). Polymer-derived Ni/SiOC materials structured by vat-based photopolymerization with catalytic activity in CO₂ methanation. Open Ceramics, 14, Article 100350. https://doi.org/10.1016/j.oceram.2023.100350 ( reposiTUm)

Rauchenecker, J., Schwarz, S., Artner, W., & Konegger, T. (2022). Atmosphere control and secondary phase migration during moderate-temperature sintering of aluminum nitride. Ceramics International, 48(11), 16425–16431. https://doi.org/10.1016/j.ceramint.2022.02.194 ( reposiTUm)

Li, C., Cao, S., Lutzki, J., Yang, J., Konegger, T., Kleitz, F., & Thomas, A. (2022). A Covalent Organic Framework/Graphene Dual-Region Hydrogel for Enhanced Solar-Driven Water Generation. Journal of the American Chemical Society, 144(7), 3083–3090. https://doi.org/10.1021/jacs.1c11689 ( reposiTUm)

Konegger, T., Prochaska, T., & Brouczek, D. (2022). Porosity control in silicon nitride-based support materials towards enhanced gas permeability. International Journal of Applied Ceramic Technology, 19(1), 165–173. https://doi.org/10.1111/ijac.13803 ( reposiTUm)

Rauchenecker, J., Rabitsch, J., Schwentenwein, M., & Konegger, T. (2022). Additive manufacturing of aluminum nitride ceramics with high thermal conductivity via digital light processing. Open Ceramics, 9(100215), 100215. https://doi.org/10.1016/j.oceram.2021.100215 ( reposiTUm)

Eßmeister, J. G., Altun, A. A., Staudacher, M., Lube, T., Schwentenwein, M., & Konegger, T. (2022). Stereolithography-based additive manufacturing of polymer-derived SiOC/SiC ceramic composites. Journal of the European Ceramic Society, 42(13), 5343–5354. https://doi.org/10.1016/j.jeurceramsoc.2022.06.021 ( reposiTUm)

Buchner, T., Kiefer, T., Zelaya-Lainez, L., Gaggl, W., Konegger, T., & Füssl, J. (2021). A Multitechnique, Quantitative Characterization of the Pore Space of Fired Bricks Made of Five Clayey Raw Materials Used in European Brick Industry. Applied Clay Science, 200(105884), 105884. https://doi.org/10.1016/j.clay.2020.105884 ( reposiTUm)

Eßmeister, J., Taublaender, M. J., Koch, T., Cerron Infantes, D. A., Unterlass, M. M., & Konegger, T. (2021). High modulus polyimide particle-reinforcement of epoxy composites. Materials Advances, 2(7), 2278–2288. https://doi.org/10.1039/d0ma00980f ( reposiTUm)

Hudelja, H., Konegger, T., Wicklein, B., Čretnik, J., Akhtar, F., & Kocjan, A. (2021). Freeze-casting of highly porous cellulose-nanofiber-reinforced γ-Al₂O₃ monoliths. Open Ceramics, 5(100069), 100069. https://doi.org/10.1016/j.oceram.2021.100069 ( reposiTUm)

Lahnsteiner, M., Caldera, M., Moura, H. M., Cerron Infantes, D. A., Roeser, J., Konegger, T., Thomas, A., Menche, J., & Unterlass, M. M. (2021). Hydrothermal polymerization of porous aromatic polyimide networks and machine learning-assisted computational morphology evolution interpretation. Journal of Materials Chemistry A: Materials for Energy and Sustainability, 9(35), 19754–19769. https://doi.org/10.1039/d1ta01253c ( reposiTUm)

Konegger, T., Drechsel, C., & Peterlik, H. (2021). in-situ Small Angle X-ray Scattering (SAXS) - a versatile tool for clarifying the evolution of microporosity in polymer-derived ceramics. Microporous and Mesoporous Materials, 324(111268), 111268. https://doi.org/10.1016/j.micromeso.2021.111268 ( reposiTUm)

Hajian, A., Konegger, T., Bielecki, T., Mieller, B., Rabe, T., Schwarz, S., Zellner, C., & Schmid, U. (2021). Wet chemical porosification with phosphate buffer solutions for permittivity reduction of LTCC substrates. Journal of Alloys and Compounds, 863(158059), 158059. https://doi.org/10.1016/j.jallcom.2020.158059 ( reposiTUm)

Drechsel, C., Peterlik, H., Gierl-Mayer, C., Stöger-Pollach, M., & Konegger, T. (2021). Influence of DVB as linker molecule on the micropore formation in polymer-derived SiCN ceramics. Journal of the European Ceramic Society, 41(6), 3292–3302. https://doi.org/10.1016/j.jeurceramsoc.2021.01.051 ( reposiTUm)

Konegger, T., Gierl-Mayer, C., Sikora, A., Rojacz, H., Fafilek, G., Danninger, H., & Adam, K. (2020). Powder metallurgy manufacturing of iron aluminides with different aluminium contents and magnesium addition by reactive hot pressing. Powder Metallurgy Progress, 20(1), 41–55. https://doi.org/10.2478/pmp-2020-0005 ( reposiTUm)

Altun, A. A., Prochaska, T., Konegger, T., & Schwentenwein, M. (2020). Dense, Strong, and Precise Silicon Nitride-Based Ceramic Parts by Lithography-Based Ceramic Manufacturing. Applied Sciences, 10(3), 996. https://doi.org/10.3390/app10030996 ( reposiTUm)

Mikl, G., Obmann, R., Schörpf, S., Liska, R., & Konegger, T. (2019). Pore Morphology Tailoring in Polymer-derived Ceramics generated through Photopolymerization-assisted Solidification Templating. Advanced Engineering Materials, 21(6), 1900052. https://doi.org/10.1002/adem.201900052 ( reposiTUm)

Hajian, A., Brehl, M., Koch, T., Zellner, C., Schwarz, S., Konegger, T., de Ligny, D., & Schmid, U. (2019). Wet-chemical porosification of LTCC substrates: Dissolution mechanism and mechanical properties. Microporous and Mesoporous Materials, 288(109593), 109593. https://doi.org/10.1016/j.micromeso.2019.109593 ( reposiTUm)

Hajian, A., Smetaczek, S., Zellner, C., Stöger-Pollach, M., Konegger, T., Limbeck, A., & Schmid, U. (2019). Tailored and deep porosification of LTCC substrates with phosphoric acid. Journal of the European Ceramic Society, 39(10), 3112–3119. https://doi.org/10.1016/j.jeurceramsoc.2019.04.026 ( reposiTUm)

Hajian, A., Müftüoglu, D., Konegger, T., Schneider, M., & Schmid, U. (2019). On the porosification of LTCC substrates with sodium hydroxide. Composites Part B: Engineering, 157, 14–23. https://doi.org/10.1016/j.compositesb.2018.08.071 ( reposiTUm)

Harper, D. J., Konegger, T., Augustin, M., Schützenberger, K., Eugui, P., Lichtenegger, A., Merkle, C. W., Hitzenberger, C. K., Glösmann, M., & Baumann, B. (2019). Hyperspectral optical coherence tomography for in vivo visualization of melanin in the retinal pigment epithelium. Journal of Biophotonics, 12(12). https://doi.org/10.1002/jbio.201900153 ( reposiTUm)

Obmann, R., Schörpf, S., Gorsche, C., Liska, R., Fey, T., & Konegger, T. (2019). Porous polysilazane-derived ceramic structures generated through photopolymerization-assisted solidification templating. Journal of the European Ceramic Society, 39(4), 838–845. https://doi.org/10.1016/j.jeurceramsoc.2018.11.045 ( reposiTUm)

Konegger, T. (2018). Poröse und zellulare Keramiken auf Basis präkeramischer Polymere. DGM-DIALOG - Materialwissenschaft Und Werkstofftechnik, 2/2018, 104–109. http://hdl.handle.net/20.500.12708/144489 ( reposiTUm)

Eugui, P., Lichtenegger, A., Augustin, M., Harper, D. J., Muck, M., Roetzer, T., Wartak, A., Konegger, T., Widhalm, G., Hitzenberger, C. K., Woehrer, A., & Baumann, B. (2018). Beyond backscattering: optical neuroimaging by BRAD. Biomedical Optics Express, 9(6), 2476. https://doi.org/10.1364/boe.9.002476 ( reposiTUm)

Prieto, E., De Oro Calderon, R., Konegger, T., Gordo, E., Gierl-Mayer, C., Sheikh, S., Guo, S., Danninger, H., Milenkovic, S., & Alvaredo, P. (2018). Processing of a new high entropy alloy: AlCrFeMoNiTi. Powder Metallurgy, 61(3), 258–265. https://doi.org/10.1080/00325899.2018.1457862 ( reposiTUm)

Kocjan, A., Konegger, T., & Dakskobler, A. (2017). Hierarchical macroporous-mesoporous γ-alumina monolithic green bodies with high strength. Journal of Materials Science, 52(19), 11168–11178. https://doi.org/10.1007/s10853-017-0894-z ( reposiTUm)

Leimhofer, L., Baumgartner, B., Puchberger, M., Prochaska, T., Konegger, T., & Unterlass, M. M. (2017). Green one-pot synthesis and processing of polyimide-silica hybrid materials. Journal of Materials Chemistry A: Materials for Energy and Sustainability, 5(31), 16326–16335. https://doi.org/10.1039/c7ta02498c ( reposiTUm)

Konegger, T., Peterlik, H., & Bordia, R. K. (2017). Micro-/Mesoporous Polymer-Derived Ceramic Structures Using Molecular Porogens. Key Engineering Materials, 742, 310–316. https://doi.org/10.4028/www.scientific.net/kem.742.310 ( reposiTUm)

Brouzcek, D., & Konegger, T. (2017). Open-Porous Silicon Nitride-Based Ceramics in Tubular Geometry Obtained by Slip-Casting and Gelcasting. Advanced Engineering Materials, 19(10), 1–15. https://doi.org/10.34726/1041 ( reposiTUm)

Ofner, J., Brenner, F., Wieland, K., Eitenberger, E., Kirschner, J., Eisenmenger-Sittner, C., Török, S., Döme, B., Konegger, T., Kasper-Giebl, A., Hutter, H., Friedbacher, G., Lendl, B., & Lohninger, H. (2017). Image-based chemical structure determination. Scientific Reports, 7, Article 6832. https://doi.org/10.1038/s41598-017-07041-x ( reposiTUm)

Konegger, T., Tsai, C.-C., Peterlik, H., Creager, S. E., & Bordia, R. K. (2016). Asymmetric Polysilazane-derived Ceramic Structures with Multiscalar Porosity for Membrane Applications. Microporous and Mesoporous Materials, 232, 196–204. https://doi.org/10.1016/j.micromeso.2016.06.027 ( reposiTUm)

KONEGGER, T., PROCHASKA, T., & OBMANN, R. (2016). Tubular ceramic structures from polymer precursors with controlled porosity, strength, and permeability characteristics. Journal of the Ceramic Society of Japan, 124(10), 1030–1034. https://doi.org/10.2109/jcersj2.16103 ( reposiTUm)

Schneider, P., & Konegger, T. (2016). Statistische Versuchsplanung bei der Konsolidierung SiC-gefüllter Precursorkeramiken. Keramische Zeitschrift, 68(6), 308–313. http://hdl.handle.net/20.500.12708/149137 ( reposiTUm)

Konegger, T., Felzmann, R., Achleitner, B., & Brouczek, D. (2015). Mullite-based cellular ceramics obtained by a combination of direct foaming and reaction bonding. Ceramics International, 41(7), 8630–8636. https://doi.org/10.1016/j.ceramint.2015.03.073 ( reposiTUm)

Konegger, T., Patidar, R., & Bordia, R. K. (2015). A novel processing approach for free-standing porous non-oxide ceramic supports from polycarbosilane and polysilazane precursors. Journal of the European Ceramic Society, 35(9), 2679–2683. https://doi.org/10.1016/j.jeurceramsoc.2015.03.009 ( reposiTUm)

Konegger, T., Williams, L. F., & Bordia, R. K. (2015). Planar, polysilazane-derived porous ceramic supports for membrane and catalysis applications. Journal of the American Ceramic Society, 98(10), 3047–3053. http://hdl.handle.net/20.500.12708/150801 ( reposiTUm)

Konegger, T., Tsai, C. C., & Bordia, R. K. (2015). Preparation of polymer-derived ceramic coatings by dip-coating. Materials Science Forum, 825–826, 645–652. https://doi.org/10.4028/www.scientific.net/msf.825-826.645 ( reposiTUm)

Ziebell, A., Schöppl, O., Haubner, R., & Konegger, T. (2015). Identification of bearing defects in hybrid thrust ball bearings by vibration analysis. Materials Science Forum, 825–826, 844–851. https://doi.org/10.4028/www.scientific.net/msf.825-826.844 ( reposiTUm)

Konegger, T., Schneider, P., Bauer, V., Amsüss, A., & Liersch, A. (2013). Structure and performance of polymer-derived bulk ceramics determined by method of filler incorporation. IOP Conference Series: Materials Science and Engineering, 47, 012054. https://doi.org/10.1088/1757-899x/47/1/012054 ( reposiTUm)

Konegger, T. (2013). Image-analytical evaluation of the spatial distribution of particulate fillers in ceramic composites prepared via the polymer-derived ceramics route. Materials Characterization, 86, 9–20. https://doi.org/10.1016/j.matchar.2013.09.003 ( reposiTUm)

Konegger, T., Liersch, A., Gierl, C., & Scheffler, M. (2013). Bulk Ceramic Composites Derived from a Preceramic Polysilazane with Alumina and Zirconia Fillers. Advanced Engineering Materials, 15(5), 394–406. http://hdl.handle.net/20.500.12708/154746 ( reposiTUm)

Baumann, B., Baumann, S. O., Konegger, T., Pircher, M., Götzinger, E., Schlanitz, F., Schütze, C., Sattmann, H., Litschauer, M., Schmidt-Erfurth, U., & Hitzenberger, C. K. (2012). Polarization sensitive optical coherence tomography of melanin provides intrinsic contrast based on depolarization. Biomedical Optics Express, 3(7), 1670. https://doi.org/10.1364/boe.3.001670 ( reposiTUm)

Muhammad, A., Sato Turtelli, R., Kriegisch, M., Grössinger, R., Kubel, F., & Konegger, T. (2012). Large enhancement of magnetostriction due to compaction hydrostatic pressure and magnetic annealing in CoFe₂O₄. Journal of Applied Physics, 111(1), 013918. https://doi.org/10.1063/1.3675489 ( reposiTUm)

Konegger, T., & Liersch, A. (2011). Current Developments and Challenges in the Field of Polymer-Derived Ceramics. Interceram, 60(3–4), 226–229. http://hdl.handle.net/20.500.12708/162213 ( reposiTUm)

Konegger, T., Potzmann, R., Puchberger, M., & Liersch, A. (2011). Matrix-filler interactions in polysilazane-derived ceramics with Al₂O₃ and ZrO₂ fillers. Journal of the European Ceramic Society, 31(15), 3021–3031. https://doi.org/10.1016/j.jeurceramsoc.2011.07.015 ( reposiTUm)

Strobl, S., Gierl, C., Konegger, T., Kupkova, M., & Kabatova, M. (2006). Formation of structures with a microgradient in sintered iron-based powders by copper-coating. Powder Metallurgy Progress, 6(4), 149–155. http://hdl.handle.net/20.500.12708/173306 ( reposiTUm)

Konegger, T., Eßmeister, J. G., Schachtner, L., & Rauchenwald, K. (2024). Light as a processing tool for complex-structured polymer-derived ceramic materials. In 48th International Conference & Exposition on Advanced Ceramics and Composites - ABSTRACT BOOK (pp. 77–77). ( reposiTUm)

Konegger, T., Eßmeister, J. G., Fuchsberger, A.-M., Steiner, D., Schwarz, S., Schachinger, T., Lale, A., Schwentenwein, M., & Föttinger, K. (2024). Hierarchical structuring of ceramic and ceramic-metal hybrid materials via vat photopolymerization of preceramic polymer resins. In 48th International Conference & Exposition on Advanced Ceramics and Composites - ABSTRACT BOOK (pp. 149–150). http://hdl.handle.net/20.500.12708/194184 ( reposiTUm)

Rauchenwald, K., Miksovsky, P., Naghdi, S., Rabl, H., Eder, D., Bica-Schröder, K., & Konegger, T. (2024). Polymer-derived silicon oxycarbide as support material for ionic liquids for heterogeneous catalysis. In Book of Abstracts (pp. 481–481). Akadémiai Kiadó. ( reposiTUm)

Konegger, T., & Eßmeister, J. (2024). Preceramic polymers as precursors to advanced ceramic and ceramic/metal hybrid materials for chemical conversion processes. In ISNNM-2024 Abstract Book (pp. 69–69). The Korean Powder Metallurgy & Materials Institute. ( reposiTUm)

Strutz, P., Demel-Eckhart, S., & Konegger, T. (2024). Recycling of YSZ Dental Blanks. In Keramik 2024 - Book of Abstracts (pp. 96–96). Deutsche Keramische Gesellschaft e. V. http://hdl.handle.net/20.500.12708/208911 ( reposiTUm)

Konegger, T., Eßmeister, J., Fuchsberger, A., Steiner, D., Schwarz, S., Schachinger, T., Lale, A., Schwentenwein, M., & Föttinger, K. (2024). Hierarchically porous ceramic materials via vat photopolymerization-induced phase-separation as catalysts for CO₂ methanation. In Book of Abstracts CMCEE14 (pp. 476–477). Akadémiai Kiadó. http://hdl.handle.net/20.500.12708/210504 ( reposiTUm)

Danninger, H., Hojati, M., Tokatligil, D. D., Konegger, T., & Gierl-Mayer, C. (2022). Measurement of the pore diameter in sitnered steels with varying porosity. In Proceedings of World PM2022, Congress and Exhibition (p. 5368092). ( reposiTUm)

Szoldatits, E. M., Eßmeister, J. G., Schachtner, L., Konegger, T., & Föttinger, K. (2022). Catalytic performance of Ni-SiOC in CO2 methanation. In 15th Pannonian International Symposium on Catalysis: Program and Abstracts. 15th Pannonian International Symposium on Catalysis, Jastrzębia Góra, Poland. ( reposiTUm)

Harper, D. J., Konegger, T., Schützenberger, K., Augustin, M., Lichtenegger, A., Eugui, P., Hitzenberger, C. K., & Baumann, B. (2019). Hyperspectral optical coherence tomography: a tool for in vivo visualization of melanin in the retinal pigment epithelium. In Optical Coherence Imaging Techniques and Imaging in Scattering Media III. SPIE, Austria. Proc. SPIE. https://doi.org/10.1117/12.2526059 ( reposiTUm)

Nebel, M., Drechsel, C., & Konegger, T. (2018). Modification of preceramic polymers and investigation of their porosity development. In VSS 2018 (pp. 86–87). Book-of-Abstracts.com. http://hdl.handle.net/20.500.12708/50153 ( reposiTUm)

Rauchenecker, J., & Konegger, T. (2018). Coating of tubular silicon nitride support structures with polymer derived ceramic membrane layers. In VSS 2018 (pp. 88–89). Book-of-Abstracts.com. http://hdl.handle.net/20.500.12708/50154 ( reposiTUm)

Obmann, R., & Konegger, T. (2018). Porous polymer derived SiCN-ceramic with directional pore structure obtained by freeze casting. In VSS 2018 (pp. 76–77). Book-of-Abstracts.com. http://hdl.handle.net/20.500.12708/50152 ( reposiTUm)

Drechsel, C., Haubner, R., & Konegger, T. (2017). A processing routine for layered Si3N4/SiCN structures with graded multiscalar porosity. In VSS - Vienna Young Scientists Symposium (pp. 84–85). http://hdl.handle.net/20.500.12708/49803 ( reposiTUm)

Prochaska, T., Haubner, R., & Konegger, T. (2017). Porous Si3N4-based support materials with tailored gas permeability. In VSS - Vienna Young Scientists Symposium (pp. 72–73). http://hdl.handle.net/20.500.12708/49804 ( reposiTUm)

Prieto Munoz, E. M., de Oro Calderon, R., Konegger, T., Gordo Oderiz, E., Gierl-Mayer, C., Danninger, H., & Alvaredo Olmos, P. (2017). Study of sintering behavior of TiAlCrFeMoNi multiprincipal element alloy. In Proceedings EuroPM 2017 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/49914 ( reposiTUm)

Drechsel, C., Haubner, R., & Konegger, T. (2017). Porous silicon (carbo)nitride layer structures for separation applications. In International Forum of Young Researchers “Topical Issues of Subsoil Usage” (pp. 44–46). http://hdl.handle.net/20.500.12708/49784 ( reposiTUm)

Ziebell, A., Ofner, J., Lendl, B., & Konegger, T. (2015). Localization of phase transformation processes in zirconia-based ceramics by topography-based confocal Raman imaging. In Abstracts Poster (pp. 636–637). http://hdl.handle.net/20.500.12708/48920 ( reposiTUm)

Ziebell, A., Schöppl, O., Haubner, R., & Konegger, T. (2015). Test rig trials of Si3N4 balls in thrust ball bearings. In Vienna Young Scientists Symposium (pp. 154–155). Book-of-Abstracts.com, Gumpoldskirchen. http://hdl.handle.net/20.500.12708/48890 ( reposiTUm)

Konegger, T., Halwax, E., Zbiral, J., Limbeck, A., & Liersch, A. (2011). Blue-coloured polymer-derived ceramics? An investigation. In ECerS XII (p. 1). European Ceramic Society. http://hdl.handle.net/20.500.12708/47372 ( reposiTUm)

Konegger, T., Litschauer, M., & Liersch, A. (2011). Influence of filler pre-treatment on processing and properties of polysilazane-based PDCs. In ECerS XII (p. 1). European Ceramic Society. http://hdl.handle.net/20.500.12708/47371 ( reposiTUm)

Kütäubel, S., Konegger, T., & Haubner, R. (2010). Optimization of the slip-casting process for the fabrication of polymer-derived ceramic microparts. In Proceedings of the Junior Scientist Conference 2010 (pp. 219–220). Vienna University of Technology. http://hdl.handle.net/20.500.12708/46774 ( reposiTUm)

Baumann, B., Baumann, S. O., Konegger, T., Pircher, M., Götzinger, E., Sattmann, H., Litschauer, M., & Hitzenberger, C. K. (2010). Polarization sensitive optical coherence tomography of melanin provides tissue inherent contrast based on depolarization. In Progress in Biomedical Optics and Imaging - Proceedings of SPIE Vol. 7554 (p. 6). International Society for Optical Engineering. http://hdl.handle.net/20.500.12708/46810 ( reposiTUm)

Konegger, T., Liersch, A., & Felzmann, R. (2008). Influence Of Oxide Ceramic Fillers On Mechanical Characteristics Of Polysilazane-derived Ceramic Materials. In 2nd International Congress On Ceramics Global Roadmap for Ceramics ICC2 - Proceedings (p. 6). ISTEC-CNR. http://hdl.handle.net/20.500.12708/46089 ( reposiTUm)

Edtmaier, C., Janhsen, T., Hula, R. C., Konegger, T., Wulz, H. G., & Simancik, F. (2008). Short and Long Carbon Fiber MMCs Using Pre-Coated Fibers. In 1st ExtreMat conference. 1st International Conference on New Materials for Extreme Environments, San Sebastian, Spain, EU. http://hdl.handle.net/20.500.12708/46072 ( reposiTUm)

Konegger, T., & Liersch, A. (2008). Investigation of mechanical properties of polymer-derived Si-C-N/Al2O3-composites with low shrinkage. In Junior Scientist Conference 2008 Proceedings (pp. 155–156). http://hdl.handle.net/20.500.12708/46229 ( reposiTUm)

Strobl, S., Gierl, C., Konegger, T., Kupkova, M., & Kabatova, M. (2006). Microgradient structures of copper-coated and sintered Fe and Cr-Mo-steel powders. In L. Parilak (Ed.), Proceedings Fraktografia / Fractography 2006 (pp. 460–464). Slovak Academy of Sciences. http://hdl.handle.net/20.500.12708/45515 ( reposiTUm)

Vincze, M. (2000). Comparison of Prediction Methods for Vision-based Control of Motion. In T. Konegger (Ed.), SYROCO ’00 - Reprints Volume II (pp. 693–698). http://hdl.handle.net/20.500.12708/68360 ( reposiTUm)

Konegger, T., Torrey, J., Flores, O., Fey, T., Ceron-Nicolat, B., Motz, G., Scheffler, F., Scheffler, M., Greil, P., & Bordia, R. K. (2014). Ceramics for Sustainable Energy Technologies with a Focus on Polymer-Derived Ceramics. In Novel Combustion Concepts for Sustainable Energy Development (pp. 501–533). Springer. https://doi.org/10.1007/978-81-322-2211-8_22 ( reposiTUm)

Rauchenwald, K., Miksovsky, P., Schröder, K., Edtmaier, T., Shirvani, R., Steiger, M., Föttinger, K., & Konegger, T. (2025, April 3). Freeze-casting of polysiloxane-derived ceramics for CO2 utilization [Conference Presentation]. AuCerS 2025 - Workshop “Keramik in Österreich” und 13. Mitgliederversammlung, Wien, Austria. http://hdl.handle.net/20.500.12708/219186 ( reposiTUm)

Felsberger, T., Ivekovic, A., Vuksic, M., Stöger-Pollach, M., & Konegger, T. (2025, August 31). In-situ formation of magnetic nanoparticles in polymer-derived ceramics [Poster Presentation]. XIXth Conference of the European Ceramic Society (ECerS XIX 2025), Dresden, Germany. ( reposiTUm)

Rauchenwald, K., Miksovsky, P., Schröder, K., Edtmaier, T., Shirvani, R., Steiger, M., Föttinger, K., & Konegger, T. (2025, August 31). Freeze-casting of polysiloxane-derived ceramics for CO2 utilization [Conference Presentation]. XIXth Conference of the European Ceramic Society (ECerS XIX 2025), Dresden, Germany. ( reposiTUm)

Konegger, T., Rauchenwald, K., Eßmeister, J., Schwentenwein, M., & Föttinger, K. (2025, August 31). Hybrid processing of preceramic polymers for the development of hierarchically porous ceramics applicable in chemical conversion applications [Conference Presentation]. XIXth Conference of the European Ceramic Society (ECerS XIX 2025), Dresden, Germany. ( reposiTUm)

Shah, M., Edtmaier, T., Bauer, F., Ivekovic, A., Kracalik, M., & Konegger, T. (2025, August 31). Cross-linking strategies to improve structural integrity of polymer-derived ceramics for extrusion-based AM [Poster Presentation]. XIXth Conference of the European Ceramic Society (ECerS XIX 2025), Dresden, Germany. ( reposiTUm)

Rauchenwald, K., Miksovsky, P., Schröder, K., Föttinger, K., & Konegger, T. (2024, April 29). Freeze-casting of poylmer-derived ceramics for CO2 utilization [Presentation]. 5th FemChem Scientific Workshop, Wien, Austria. ( reposiTUm)

Konegger, T. (2024, April 9). Innovative processing strategies for the porosification of polymer-derived ceramics [Presentation]. Seminar at Institute of Materials Science, Brno University of Technology, Brno, Czechia. ( reposiTUm)

Rauchenwald, K., Föttinger, K., & Konegger, T. (2024, September 27). Photopolymerization-assisted solidification templating of polysiloxane-derived ceramics as a versatile shaping concept towards novel catalyst reactors [Conference Presentation]. Shaping 9, Warschau, Poland. http://hdl.handle.net/20.500.12708/208490 ( reposiTUm)

Rauchenwald, K., Miksovsky, P., Bica-Schröder, K., Föttinger, K., & Konegger, T. (2024, November 27). Freeze-casting of polysiloxane-derived ceramics to support heterogeneous catalysis [Conference Presentation]. 8th International Conference on Cellular Materials (CellMAT 2024), Magdeburg, Germany. http://hdl.handle.net/20.500.12708/208493 ( reposiTUm)

Konegger, T., Eßmeister, J., Fuchsberger, A., & Rauchenwald, K. (2024, November 28). Photopolymerization-assisted structuring of porous polymer-derived ceramics for chemical conversion processes [Conference Presentation]. 8th International Conference on Cellular Materials (CellMAT 2024), Magdeburg, Germany. http://hdl.handle.net/20.500.12708/208494 ( reposiTUm)

Felsberger, T., Eßmeister, J., Fuchsberger, A., & Konegger, T. (2024, November 27). Surface functionalization of hierarchically porous ceramics structured by vat photopolymerization [Poster Presentation]. 8th International Conference on Cellular Materials (CellMAT 2024), Magdeburg, Germany. http://hdl.handle.net/20.500.12708/208354 ( reposiTUm)

Konegger, T., Eßmeister, J., Fuchsberger, A., & Schachtner, L. (2024, May 22). Polymerabgeleitete Keramiken und Keramik/Metall-Hybridwerkstoffe mit hierarchischer Porenstruktur [Presentation]. DGM-Fachausschusssitzung “Zellulare Werkstoffe,” Erlangen, Germany. http://hdl.handle.net/20.500.12708/208365 ( reposiTUm)

Lebhard, A., Schwentenwein, M., & Konegger, T. (2024, September 26). 3D printing of high strength zirconia-based materials by Lithography-based Ceramic Manufacturing (LCM) [Conference Presentation]. Shaping 9, Warschau, Poland. http://hdl.handle.net/20.500.12708/208470 ( reposiTUm)

Lebhard, A., Schwentenwein, M., & Konegger, T. (2024, May 6). Additive manufacturing of zirconia-based materials by lithography-based ceramic manufacturing for high strength and reliability [Conference Presentation]. The young Ceramists Additive Manufacturing Forum (yCAM 2024), Tampere, Finland. http://hdl.handle.net/20.500.12708/208363 ( reposiTUm)

Konegger, T., Eßmeister, J., Schachtner, L., Fuchsberger, A., & Rauchenwald, K. (2024, April 4). Designing new materials for chemical conversion processes via polymer-derived ceramics technology [Conference Presentation]. AuCerS 2024 – Workshop ‚Keramik in Österreich‘ und 12. Mitgliederversammlung, Graz, Austria. http://hdl.handle.net/20.500.12708/208360 ( reposiTUm)

Rauchenwald, K., Miksovsky, P., Shirvani, R., Edtmaier, T., Schröder, K., Föttinger, K., Steiger, M., & Konegger, T. (2024, May 29). Freeze-casting of polysiloxane-derived ceramics for CO2 utilization [Poster Presentation]. 2nd TCH Science Days: PhD & Postdoc Day 2024, Wien, Austria. http://hdl.handle.net/20.500.12708/208356 ( reposiTUm)

Eßmeister, J. G., Schachtner, L., Szoldatits, E. M., Föttinger, K., Altun, A. A., Schwentenwein, M., & Konegger, T. (2023, April 13). Stereolithography-based additive manufacturing of polymer-derived ceramics for catalysis applications [Conference Presentation]. Präsentationswettbewerb und 11. Mitgliederversammlung der Österreichischen Keramischen Gesellschaft, Leoben, Austria. http://hdl.handle.net/20.500.12708/189030 ( reposiTUm)

Konegger, T., Drechsel, C., & Peterlik, H. (2023, January). Strategies for macro- and microporosification of polymer-derived ceramics [Conference Presentation]. 47th International Conference and Expo on Advanced Ceramics and Composites (ICACC2023), Daytona Beach, United States of America (the). http://hdl.handle.net/20.500.12708/189027 ( reposiTUm)

Rauchenwald, K., & Konegger, T. (2023, April 13). Multimodal macropore-tailoring of freeze-cast SiOC utilizing binary structure-directing agents [Conference Presentation]. Präsentationswettbewerb und 11. Mitgliederversammlung der Österreichischen Keramischen Gesellschaft, Leoben, Austria. ( reposiTUm)

Rauchenwald, K., & Konegger, T. (2023, July). Multimodal macropore-tailoring of freeze-cast SiOC utilizing binary structure-directing agents [Conference Presentation]. XVIIIth Conference of the European Ceramic Society (ECerS 2023), Lyon, France. ( reposiTUm)

Konegger, T., Eßmeister, J. G., Schachtner, L., Szoldatits, E. M., Lichtenegger, A., Baumann, B., & Föttinger, K. (2023, July). Vat photopolymerization of metal-functionalized polymer-derived ceramics as catalysts for CO2 methanation [Conference Presentation]. XVIIIth Conference of the European Ceramic Society (ECerS 2023), Lyon, France. http://hdl.handle.net/20.500.12708/188965 ( reposiTUm)

Miksovsky, P., Rauchenwald, K., Horn, E. N., Naghdi, S., Eder, D., Konegger, T., Schnürch, M., & Schröder, K. (2023, April 25). Continuous Formation of Bioderived Carbonates in Supercritical Carbon Dioxide Catalyzed by Supported Ionic Liquids [Poster Presentation]. COIL9. Congress on Ionic Liquids, Lyon, France. http://hdl.handle.net/20.500.12708/187158 ( reposiTUm)

Eßmeister, J. G., Schachtner, L., Fuchsberger, A., Szoldatits, E. M., Föttinger, K., Altun, A. A., Lale, A., Schwentenwein, M., & Konegger, T. (2023, January). Stereolithography-based additive manufacturing of polymer-derived structures exhibiting catalytic activity [Conference Presentation]. 47th International Conference and Exposition on Advanced Ceramics and Composites (ICACC2023), Daytona Beach, United States of America (the). http://hdl.handle.net/20.500.12708/189029 ( reposiTUm)

Konegger, T., Drechsel, C., Stöger-Pollach, M., & Peterlik, H. (2022). In-situ monitoring of the micropore evolution during the pyrolytic conversion of preceramic polymers. 46th International Congress and Expo on Advanced Ceramics and Composites (ICACC 2022), Daytona Beach, United States of America (the). http://hdl.handle.net/20.500.12708/101733 ( reposiTUm)

Eßmeister, J. G., Schachtner, L., Szoldatits, E. M., Föttinger, K., & Konegger, T. (2022, June 23). Metal-modified polymer-derived ceramics for stereolithography-based fabrication of catalyst carrier structures [Conference Presentation]. CIMTEC 2022, Perugia, Italy. ( reposiTUm)

Hajian, A., Liu Zhifu, Smetaczek, S., Konegger, T., Zellner, C., Limbeck, A., & Schmid, U. (2022). Wet Chemical Etching of CaO-SiO₂-B₂O₃ Ternary System as Crystallizing Glass in an LTCC System [Conference Presentation]. CICMT 2022 - Ceramic Interconnect and Ceramic Microsystems Technologies, Wien, Austria. ( reposiTUm)

Rauchenecker, J., Rabitsch, J., Schwentenwein, M., & Konegger, T. (2022, July 11). Additive manufacturing of aluminum nitride ceramics with high thermal conductivity via lithography-based ceramic manufacturing [Conference Presentation]. Ceramics in Europe 2022, Krakow, Poland. http://hdl.handle.net/20.500.12708/137056 ( reposiTUm)

Eßmeister, J. G., Schachtner, L., Altun, A. A., Schwentenwein, M., Szoldatits, E. M., Föttinger, K., & Konegger, T. (2022, October 13). Stereolithography-based additive manufacturing of polymer-derived catalyst carrier structures [Conference Presentation]. CellMAT 2022, Dresden, Germany. http://hdl.handle.net/20.500.12708/137060 ( reposiTUm)

Konegger, T., Drechsel, C., & Peterlik, H. (2022, June 22). Evolution of transient microporosity in polymer-derived ceramics: in-situ monitoring and tailoring strategies [Conference Presentation]. CIMTEC 2022, Perugia, Italy. http://hdl.handle.net/20.500.12708/137057 ( reposiTUm)

Eßmeister, J. G., Altun, A. A., Staudacher, M., Lube, T., Schwentenwein, M., & Konegger, T. (2022, July 13). Lithography-based additive manufacturing of polymer-derived SiOC/SiC composites [Conference Presentation]. Ceramics in Europe 2022, Krakow, Poland. http://hdl.handle.net/20.500.12708/137062 ( reposiTUm)

Rauchenwald, K., Eßmeister, J. G., Bartsch, V., Mayr, M., & Konegger, T. (2022, October 12). Photopolymerization-assisted solidification templating of porous polysiloxane-derived ceramics with tailored pore morphology [Poster Presentation]. CellMAT 2022, Dresden, Germany. http://hdl.handle.net/20.500.12708/137061 ( reposiTUm)

Eßmeister, J., Altun, A. A., Schwentenwein, M., & Konegger, T. (2021). Stereolithography-based additive manufacturing of SiC-filled polymer-derived ceramics. AuCerS - Präsentationswettbewerb und 9. Mitgliederversammlung, Graz, Austria. http://hdl.handle.net/20.500.12708/101585 ( reposiTUm)

Rauchenecker, J., Rabitsch, J., Schwentenwein, M., & Konegger, T. (2021). 3D-printable AlN powder systems with high thermal conductivity. AuCerS - Präsentationswettbewerb und 9. Mitgliederversammlung, Graz, Austria. http://hdl.handle.net/20.500.12708/101586 ( reposiTUm)

Rauchenecker, J., Rabitsch, J., Schwentenwein, M., & Konegger, T. (2021). Development of AlN powder systems for additive manufacturing by vat photopolymerization. 96. DKG-Jahrestagung / 96th DKG Annual Meeting, Jülich, online, Germany. http://hdl.handle.net/20.500.12708/101588 ( reposiTUm)

Rauchenecker, J., Rabitsch, J., Schwentenwein, M., & Konegger, T. (2021). Aluminum nitride systems suitable for lithography-based additive manufacturing. 45th International Conference and Expo on Advanced Ceramics and Composites (ICACC 2021), Daytona Beach, United States of America (the). http://hdl.handle.net/20.500.12708/101587 ( reposiTUm)

Eßmeister, J., Altun, A. A., Schwentenwein, M., & Konegger, T. (2021). Stereolithography-based additive manufacturing of SiC-filled polymer-derived ceramics. Online Conference EUROMAT 2021, Graz, Austria. http://hdl.handle.net/20.500.12708/101606 ( reposiTUm)

Konegger, T., Rauchenecker, J., Rabitsch, J., & Schwentenwein, M. (2021). Lithography-based Ceramic Manufacturing of Aluminum Nitride: Materials System Development. Online Conference EUROMAT 2021, Graz, Austria. http://hdl.handle.net/20.500.12708/101605 ( reposiTUm)

Konegger, T., Obmann, R., Mikl, G., Schörpf, S., & Liska, R. (2020). Freeze casting of porous polysilazane-derived ceramics. 44th International Conference and Expo on Advanced Ceramics and Composites (ICACC 2020), Daytona Beach, United States of America (the). http://hdl.handle.net/20.500.12708/101426 ( reposiTUm)

Konegger, T., Drechsel, C., & Peterlik, H. (2020). Porosity evolution during the pyrolytic conversion of preceramic polysilazane materials. 44th International Conference and Expo on Advanced Ceramics and Composites (ICACC 2020), Daytona Beach, United States of America (the). http://hdl.handle.net/20.500.12708/101427 ( reposiTUm)

Rauchenecker, J., Hofer, A.-K., Brouczek, D., Schwentenwein, M., & Konegger, T. (2020). Aluminum nitride ceramic systems suitable for additive manufacturing: Influence of sintering parameters and sintering environments. AuCerS Workshop “Keramik in Österreich,” Graz, Austria. http://hdl.handle.net/20.500.12708/101428 ( reposiTUm)

Rauchenecker, J., Hofer, A.-K., Rabitsch, J., Schwentenwein, M., & Konegger, T. (2020). Additive manufacturing of aluminum nitride ceramics. AM Ceramics 2020 (Online Conference), Dresden, Germany. http://hdl.handle.net/20.500.12708/101451 ( reposiTUm)

Rauchenecker, J., & Konegger, T. (2019). Investigation of sintering parameters for consolidating aluminum nitride ceramics. XVI ECerS Conference 2019, Torino, Italy. http://hdl.handle.net/20.500.12708/101122 ( reposiTUm)

Drechsel, C., Peterlik, H., Gierl-Mayer, C., & Konegger, T. (2019). Influence of divinylbenzene on the pore size of polymer-derived SiCN ceramics. XVI ECerS Conference 2019, Torino, Italy. http://hdl.handle.net/20.500.12708/101121 ( reposiTUm)

Edtmaier, C., Haubner, R., Konegger, T., Weil, M., & Stöger, B. (2019). Materials research at the Institute of Chemical Technologies and Analytics - selected topics for 2020. University of Bordeaux, Bordeaux, France. http://hdl.handle.net/20.500.12708/101168 ( reposiTUm)

Drechsel, C., Peterlik, H., Gierl-Mayer, C., & Konegger, T. (2019). Tailoring of the microporosity of polymer-derived SiCN ceramics using linker molecules. 7. Jahrestagung der Österreichischen Keramischen Gesellschaft (AuCerS) mit Vortragswettbewerb, Leoben, Austria. http://hdl.handle.net/20.500.12708/101097 ( reposiTUm)

Mikl, G., Obmann, R., Schörpf, S., Liska, R., & Konegger, T. (2019). Pore Morphology Tailoring in Polymer-derived Ceramics generated through Photopolymerization-assisted Solidification Templating. 7. Jahrestagung der Österreichischen Keramischen Gesellschaft (AuCerS) mit Vortragswettbewerb, Leoben, Austria. http://hdl.handle.net/20.500.12708/101098 ( reposiTUm)

Konegger, T., Mikl, G., & Obmann, R. (2019). Pore tailoring in polymer-derived ceramics prepared by photopolymerization-assisted solidification templating. 94th DKG Annual Meeting and Symposium on High Performance Ceramics, Leoben, Austria. http://hdl.handle.net/20.500.12708/101099 ( reposiTUm)

Konegger, T., Brouczek, D., Prochaska, T., & Obmann, R. (2018). Strategien zur Kontrolle von Makroporosität in konventionellen und polymerabgeleiteten Keramiken. DGM-Fachausschusssitzung “Zellulare Werkstoffe,” Wien, Austria. http://hdl.handle.net/20.500.12708/100686 ( reposiTUm)

Edtmaier, C., Konegger, T., Haubner, R., & Weil, M. (2018). Materials research at the Institute of Chemical Technologies and Analytics - current topics for 2018. University of Bordeaux, Bordeaux, France. http://hdl.handle.net/20.500.12708/100817 ( reposiTUm)

Drechsel, C., Nebel, M., & Konegger, T. (2018). Generation and Control of Microporosity in Polymer-derived SiCN Ceramics. CIMTEC 2018 - 14th International Ceramics Congress, Perugia, Italy. http://hdl.handle.net/20.500.12708/100699 ( reposiTUm)

Konegger, T., Brouczek, D., & Prochaska, T. (2018). Pore structure control in silicon nitride membrane supports. 93. DKG-Jahrestagung und Symposium Hochleistungskeramik 2018, München, Germany. http://hdl.handle.net/20.500.12708/100678 ( reposiTUm)

Drechsel, C., Nebel, M., & Konegger, T. (2018). Influence of the precursor structure on the microporosity of SiCN ceramics. 13th Annual Materials and Optics Poster Competition, Clemson, United States of America (the). http://hdl.handle.net/20.500.12708/100694 ( reposiTUm)

Konegger, T., Drechsel, C., Prochaska, T., & Nebel, M. (2018). Micro- and macropore tailoring strategies in polysilazane-derived ceramic materials. ICC7 - 7th International Congress on Ceramics, Foz do Iguacu, Brazil. http://hdl.handle.net/20.500.12708/100707 ( reposiTUm)

Konegger, T., Obmann, R., & Mikl, G. (2018). Solidification templating of cellular polymer-derived ceramics employing photo-induced click chemistry. CellMAT 2018, Bad Staffelstein, Germany. http://hdl.handle.net/20.500.12708/100768 ( reposiTUm)

Konegger, T. (2018). Pore tailoring strategies for conventional and polymer-derived ceramic materials. Seminar, Department of Materials Science and Engineering, Clemson University, Clemson, United States of America (the). http://hdl.handle.net/20.500.12708/100667 ( reposiTUm)

Konegger, T., & Obmann, R. (2018). Solidification Templating of Porous Polysilazane-derived Ceramics. CIMTEC 2018 - 14th International Ceramics Congress, Perugia, Italy. http://hdl.handle.net/20.500.12708/100698 ( reposiTUm)

Drechsel, C., & Konegger, T. (2017). Fabrication of Si₃N₄/SiCN layer structures with graded multiscalar porosity. Mitgliederversammlung der Österreichischen Keramischen Gesellschaft 2017, Graz, Austria. http://hdl.handle.net/20.500.12708/100292 ( reposiTUm)

Brouczek, D., & Konegger, T. (2017). Casting of tubular open-porous ceramic structures based on Si₃N₄. Mitgliederversammlung der Österreichischen Keramischen Gesellschaft 2017, Graz, Austria. http://hdl.handle.net/20.500.12708/100293 ( reposiTUm)

Edtmaier, C., Konegger, T., & Haubner, R. (2017). Materials research at the Institute of Chemical Technologies and Analytics - current topics for 2017. University of Bordeaux, 2017, Bordeaux, France. http://hdl.handle.net/20.500.12708/100278 ( reposiTUm)

Konegger, T., Drechsel, C., & Bordia, R. K. (2017). Micro- and mesopore structure control in silicon carbonitride-based ceramics using molecular porogens. ECerS 2017 - 15th Conference & Exhibition of the European Ceramic Society, Budapest, Hungary. http://hdl.handle.net/20.500.12708/100328 ( reposiTUm)

Konegger, T., Bordia, R. K., & Peterlik, H. (2017). Mikroporöse keramische Strukturen aus Polymerpräkursoren mit molekularen Porogenen. 21. Symposium Verbundwerkstoffe und Werkstoffverbunde, Bremen, Germany. http://hdl.handle.net/20.500.12708/100330 ( reposiTUm)

Drechsel, C., & Konegger, T. (2017). Fabrication of Si₃N₄/SiCN layer structures with graded multiscalar porosity. ECerS 2017 - 15th Conference & Exhibition of the European Ceramic Society, Budapest, Hungary. http://hdl.handle.net/20.500.12708/100329 ( reposiTUm)

Edtmaier, C., Haubner, R., Konegger, T., & Weil, M. (2017). Materials research at the Institute of Chemical Technologies and Analytics - current topics for 2018. University of Bordeaux, 2017, Bordeaux, France. http://hdl.handle.net/20.500.12708/100396 ( reposiTUm)

Haubner, R., Lessiak, M., & Konegger, T. (2017). Improving CVD diamond deposition on carbon fibre composites by a surface treatment with polysilazane. 11th International Conference on New Diamond and Nano Carbons 2017 (NDNC 2017), Cairns, Australia. http://hdl.handle.net/20.500.12708/100320 ( reposiTUm)

Konegger, T., & Bordia, R. K. (2016). Keramiken mit multiskalarer Porosität über die Polymer-Precursor-Route. 62. Metallkunde-Kolloquium, Lech am Arlberg, Austria. http://hdl.handle.net/20.500.12708/99938 ( reposiTUm)

Brouczek, D., & Konegger, T. (2016). Tubular open-porous Si3N4-based ceramics obtained by casting methods with defined gas permeability. CellMAT 2016, Dresden, Germany. http://hdl.handle.net/20.500.12708/100060 ( reposiTUm)

Konegger, T., & Drechsel, C. (2016). Polymer-derived ceramic layer structures with graded multiscalar porosity. CellMAT 2016, Dresden, Germany. http://hdl.handle.net/20.500.12708/100059 ( reposiTUm)

Konegger, T., Prochaska, T., Obmann, R., & Bordia, R. K. (2016). Hollow tube shaped polymer-derived ceramic structures with tailored open-cell porosity. 91. DKG Jahrestagung & Symposium Hochleistungskeramik 2016, Freiberg, Germany. http://hdl.handle.net/20.500.12708/99919 ( reposiTUm)

Konegger, T., & Drechsel, C. (2016). Polymer-precursor-based processing approaches towards layered and bulk ceramic composites. 9th International Conference on High Temperature Ceramic Matrix Composites (HTCMC-9) & Global Forum on Advanced Materials and Technologies for Sustainable Development (GFMAT 2016), Toronto, Canada. http://hdl.handle.net/20.500.12708/99964 ( reposiTUm)

Konegger, T. (2016). Advanced Ceramics, MMCs, and Hard Coatings. Sino-Austrian Advanced Materials Conference, Shanghai, China. http://hdl.handle.net/20.500.12708/99911 ( reposiTUm)

Konegger, T., Prochaska, T., & Obmann, R. (2016). Tubular open-porous polymer-derived ceramic structures with tailored permeability. 9th International Conference on High Temperature Ceramic Matrix Composites (HTCMC-9) & Global Forum on Advanced Materials and Technologies for Sustainable Development (GFMAT 2016), Toronto, Canada. http://hdl.handle.net/20.500.12708/99965 ( reposiTUm)

Konegger, T. (2015). Polymerabgeleitete Keramiken - Neue Ansätze zur Generierung angepasster Porenstrukturen. 3. Mitgliederversammlung der Österreichischen Keramischen Gesellschaft, Wien, Austria. http://hdl.handle.net/20.500.12708/99587 ( reposiTUm)

Konegger, T., Tsai, C.-C., & Bordia, R. K. (2015). Polymerabgeleitete keramische Schichtwerkstoffe mit gradierter Porenstruktur für Gastrennanwendungen. 20. Symposium Verbundwerkstoffe und Werkstoffverbunde, Wien, Austria. http://hdl.handle.net/20.500.12708/99659 ( reposiTUm)

Ziebell, A., Schöppl, O., Haubner, R., & Konegger, T. (2015). Messtechnische Identifizierung von Versagensmechanismen in Prüfstandsversuchen von Hybrid-Wälzlagern. 20. Symposium Verbundwerkstoffe und Werkstoffverbunde, Wien, Austria. http://hdl.handle.net/20.500.12708/99660 ( reposiTUm)

Ziebell, A., Schöppl, O., Haubner, R., & Konegger, T. (2015). Failure prediction in hybrid ball bearings by FFT analysis of vibration data. 3. Mitgliederversammlung der Österreichischen Keramischen Gesellschaft, Wien, Austria. http://hdl.handle.net/20.500.12708/99588 ( reposiTUm)

Konegger, T., Tsai, C.-C., Peterlik, H., Creager, S., & Bordia, R. K. (2015). Asymmetric porous gas-separation membranes based on polymer-derived silicon carbonitride. 14th International Conference of the European Ceramic Society, Toledo, Spain. http://hdl.handle.net/20.500.12708/99654 ( reposiTUm)

Konegger, T., & Bordia, R. K. (2015). Poröse, polymerabgeleitete keramische Membranmaterialien mit multiskalarer Porosität für Gastrennanwendungen. 9. Sitzung DGM-Fachausschuss Zellulare Werkstoffe, Bremen, Germany. http://hdl.handle.net/20.500.12708/99709 ( reposiTUm)

Konegger, T., Williams, L. F., Ziebell, A., & Bordia, R. K. (2015). Planar and tubular porous ceramic support structures derived from preceramic polymers. 11th Pacific Rim Conference of Ceramic Societies, Jeju, Korea (the Republic of). http://hdl.handle.net/20.500.12708/99691 ( reposiTUm)

Konegger, T. (2015). Evaluation of the spatial distribution of the reinforcing phase in particle-reinforced CMCs by a versatile image analysis approach. 11th Pacific Rim Conference of Ceramic Societies, Jeju, Korea (the Republic of). http://hdl.handle.net/20.500.12708/99692 ( reposiTUm)

Konegger, T., & Bordia, R. K. (2014). Polymer-derived Ceramic Membranes for Gas Separation Applications. Clemson PostDoc Appreciation Week 2014, Clemson, United States of America (the). http://hdl.handle.net/20.500.12708/99420 ( reposiTUm)

Konegger, T., & Bordia, R. K. (2014). Polymer-derived Ceramics with Multiscale Porosity for Gas Separation Applications. CCOMC Fall Meeting 2014, Anderson, United States of America (the). http://hdl.handle.net/20.500.12708/99419 ( reposiTUm)

Konegger, T., Peterlik, H., & Bordia, R. K. (2014). Micro-, meso-, and macropore tailoring of polysilazane-derived silicon carbonitride ceramics. MS&T14 Conference, Pittsburgh, United States of America (the). http://hdl.handle.net/20.500.12708/99418 ( reposiTUm)

Konegger, T., Patidar, R., Tsai, C.-C., & Bordia, R. K. (2014). Polymer-derived ceramic support structures for membrane and catalyst applications. MS&T14 Conference, Pittsburgh, United States of America (the). http://hdl.handle.net/20.500.12708/99417 ( reposiTUm)

Konegger, T. (2013). Polymerabgeleitete Keramiken: Neue Prozessierungsansätze und potentielle Anwendungen. 11. Sitzung des Expertenkreises “Sintern”, Gemeinschaftsausschuss Pulvermetallurgie, Wien, Austria. http://hdl.handle.net/20.500.12708/99039 ( reposiTUm)

Konegger, T. (2013). A versatile image analysis routine for the evaluation of the particulate filler distribution in polymer-derived ceramic matrices. ECERS XIII - 13th Conference of the European Ceramic Society, Limoges, France, EU. http://hdl.handle.net/20.500.12708/99059 ( reposiTUm)

Konegger, T., Achleitner, B., Kohlhauser, B., & Brouczek, D. (2013). Mullite-based cellular ceramics obtained from preceramic polymers. ECERS XIII - 13th Conference of the European Ceramic Society, Limoges, France, EU. http://hdl.handle.net/20.500.12708/99060 ( reposiTUm)

Schneider, P., & Konegger, T. (2013). Process parameter optimization and filler surface modification of SiC-filled polysiloxane-derived ceramics. 1. Mitgliederversammlung der Österreichischen Keramischen Gesellschaft, Leoben, Austria. http://hdl.handle.net/20.500.12708/98999 ( reposiTUm)

Ludwig, E., Schneider, P., & Konegger, T. (2013). Titanium silicide-filled polysilazane-derived ceramic composites. International Forum - Competition “Topical Issues of Rational Use of Natural Resources,” St. Petersburg, Russian Federation (the). http://hdl.handle.net/20.500.12708/99058 ( reposiTUm)

Bauer, V., & Konegger, T. (2013). The impact of compounding methods on the properties of polymer-derived ceramic/filler composites. International Forum - Competition “Topical Issues of Rational Use of Natural Resources,” St. Petersburg, Russian Federation (the). http://hdl.handle.net/20.500.12708/99057 ( reposiTUm)

Konegger, T., Kohlhauser, B., Gierl, C., & Halwax, E. (2012). Mullitschaumherstellung durch Reaktionspyrolyse präkeramischer Polymere. DKG-Jahrestagung 2012, Nürnberg, EU. http://hdl.handle.net/20.500.12708/98736 ( reposiTUm)

Konegger, T., Schneider, P., Bauer, V., Amsüss, A., & Liersch, A. (2012). Structure and performance of polymer-derived bulk ceramics determined by method of filler incorporation. 2nd International Conference on Competitive Materials and Technology Processes (ic-cmtp2), Miskolc-Lillafüred, EU. http://hdl.handle.net/20.500.12708/98801 ( reposiTUm)

Konegger, T., Kütäubel, S., & Haubner, R. (2011). Herstellung mikrostrukturierter keramischer Bauteile auf Polysilazan-Basis über die Soft-Lithography-Technik. DKG-Jahrestagung 2011, Saarbrücken, EU. http://hdl.handle.net/20.500.12708/98483 ( reposiTUm)

Konegger, T., Kappa, M., Liersch, A., & Scheffler, M. (2009). Computer-tomographical assessment of the pore evolution in PDCs. 8th Pacific Rim Conference on Ceramic and Glass Technology, Vancouver, Kanada, Non-EU. http://hdl.handle.net/20.500.12708/98017 ( reposiTUm)

Konegger, T., & Liersch, A. (2008). Entwicklung ZrO₂-verstärkter Verbundkeramik mit Polysilazan-abgeleiteter Matrix. Symposium Hochleistungskeramik 2008, Keramik in Wissenschaft und Praxis, Hamburg, EU. http://hdl.handle.net/20.500.12708/97752 ( reposiTUm)

Konegger, T., & Liersch, A. (2008). Untersuchung der mechanischen Eigenschaften Polysilazan-abgeleiteter Keramiken mit oxidkeramischen Füllstoffen. Seminar Anorganische Funktionsmaterialien, Brandenburgische Technische Universität Cottbus, Lehrstuhl Leichtbaukeramik, EU. http://hdl.handle.net/20.500.12708/97856 ( reposiTUm)

Konegger, T. (2021). Micropore evolution in polymer-derived ceramics (Project P29058) - Final Report. http://hdl.handle.net/20.500.12708/40314 ( reposiTUm)

Konegger, T. (2015). Asymmetric polymer-derived ceramic membranes (Project J3422-N28) - Final Report. http://hdl.handle.net/20.500.12708/39127 ( reposiTUm)

Konegger, T. (2015). Offenporige keramische Gerüststrukturen auf Basis präkeramischer Polymere für Membran- und Katalyseanwendungen (Projekt H-287943/2014) - Abschlussbericht. http://hdl.handle.net/20.500.12708/39126 ( reposiTUm)

Konegger, T. (2021). Pores with a purpose: pore tailoring strategies in polymer-derived ceramic materials [Professorial Dissertation, Technische Universität Wien]. reposiTUm. http://hdl.handle.net/20.500.12708/158929 ( reposiTUm)

Konegger, T. (2010). Polysilazan-abgeleitete Keramiken mit oxidkeramischen Füllstoffen [Dissertation, Technische Universität Wien]. reposiTUm. http://hdl.handle.net/20.500.12708/160263 ( reposiTUm)