Wissenschaftliche Artikel

Reisinger, A., Bittner-Frank, M., Thurner, P. J., & Pahr, D. H. (2024). The 2-layer elasto-visco-plastic rheological model for the material parameter identification of bone tissue extended by a damage law. Journal of the Mechanical Behavior of Biomedical Materials, 150, Article 106259. https://doi.org/10.1016/j.jmbbm.2023.106259 ( reposiTUm)
Lukova, A., Dunmore, C. J., Bachmann, S., Synek, A., Pahr, D., Kivell, T. L., & Skinner, M. M. (2024). Trabecular architecture of the distal femur in extant hominids. Journal of Anatomy. https://doi.org/10.1111/joa.14026 ( reposiTUm)
Stefanek, P., Synek, A., Dall’Ara, E., & Pahr, D. H. (2023). Comparison of linear and nonlinear stepwise μFE displacement predictions to digital volume correlation measurements of trabecular bone biopsies. Journal of the Mechanical Behavior of Biomedical Materials, 138, Article 105631. https://doi.org/10.1016/j.jmbbm.2022.105631 ( reposiTUm)
Jaksa, L., Aryeetey, O. J., Hatamikia, S., Nägl, K., Buschmann, M., Pahr, D. H., Kronreif, G., & Lorenz, A. (2023). 3D-Printed multi-material liver model with simultaneous mechanical and radiological tissue-mimicking features for improved realism. International Journal of Bioprinting, 9(4). https://doi.org/10.18063/ijb.721 ( reposiTUm)
Synek, A., Ortner, L., & Pahr, D. H. (2023). Accuracy of osseointegrated screw-bone construct stiffness and peri-implant loading predicted by homogenized FE models relative to micro-FE models. Journal of the Mechanical Behavior of Biomedical Materials, 140, Article 105740. https://doi.org/10.1016/j.jmbbm.2023.105740 ( reposiTUm)
Nia, A., Jeremic, N., Popp, D., Schmoelz, L., Patsch, J., Döring, K., Weber, M., Synek, A., Pahr, D. H., & Aldrian, S. (2023). Feasibility of aluminum phantom radiography for osteoporosis detection in postmenopausal women with a fragility fracture of the distal radius compared to DXA and HR-pQCT. Journal of Orthopaedic Research, 41(8), 1774–1780. https://doi.org/10.1002/jor.25523 ( reposiTUm)
Bachmann, S., Pahr, D. H., & Synek, A. (2023). A Density-Dependent Target Stimulus for Inverse Bone (Re)modeling with Homogenized Finite Element Models. Annals of Biomedical Engineering, 51, 925–937. https://doi.org/10.1007/s10439-022-03104-x ( reposiTUm)
Bachmann, S., Pahr, D. H., & Synek, A. (2023). Hip joint load prediction using inverse bone remodeling with homogenized FE models: Comparison to micro-FE and influence of material modeling strategy. Computer Methods and Programs in Biomedicine, 236, Article 107549. https://doi.org/10.1016/j.cmpb.2023.107549 ( reposiTUm)
Amini, M., Reisinger, A., Synek, A., Hirtler, L., & Pahr, D. (2023). The predictive ability of a QCT-FE model of the proximal femoral stiffness under multiple load cases is strongly influenced by experimental uncertainties. Journal of the Mechanical Behavior of Biomedical Materials, 139, Article 105664. https://doi.org/10.1016/j.jmbbm.2023.105664 ( reposiTUm)
Dunmore, C. J., Bachmann, S., Synek, A., Pahr, D. H., Skinner, M., & Kivell, T. L. (2023). The deep trabecular structure of first metacarpals in extant hominids. AMERICAN JOURNAL OF BIOLOGICAL ANTHROPOLOGY. https://doi.org/10.1002/ajpa.24695 ( reposiTUm)
Warnung, L., Sattler, S., Haiden, E., Schober, S., Pahr, D. H., & Reisinger, A. (2023). A mechanically validated open-source silicone model for the training of gastric perforation sewing. BMC Medical Education, 23, Article 261. https://doi.org/10.1186/s12909-023-04174-8 ( reposiTUm)
Streicher, J., Reisinger, A., Warnung, L., & Pahr, D. (2022). 3D‐Printing Offers Dry Replication and New Insight into Unique Museum Specimens. FASEB Journal, 36(S1). https://doi.org/10.1096/fasebj.2022.36.S1.R2197 ( reposiTUm)
Aryeetey, O. J., Frank, M., Lorenz, A., & Pahr, D. (2022). Fracture toughness determination of porcine muscle tissue based on AQLV model derived viscous dissipated energy. Journal of the Mechanical Behavior of Biomedical Materials, 135, Article 105429. https://doi.org/10.1016/j.jmbbm.2022.105429 ( reposiTUm)
Estermann, S.-J., Pahr, D. H., & Reisinger, A. (2022). Material design of soft biological tissue replicas using viscoelastic micromechanical modelling. Journal of the Mechanical Behavior of Biomedical Materials, 125(104875), 104875. https://doi.org/10.1016/j.jmbbm.2021.104875 ( reposiTUm)
Zupancic Cepic, L., Frank, M., Reisinger, A. G., Sagl, B., Pahr, D. H., Zechner, W., & Schedle, A. (2022). Experimental validation of a micro-CT finite element model of a human cadaveric mandible rehabilitated with short-implant-supported partial dentures. Journal of the Mechanical Behavior of Biomedical Materials, 126(105033), 105033. https://doi.org/10.1016/j.jmbbm.2021.105033 ( reposiTUm)
Voumard Benjamin, Stefanek, P., Pretterklieber, M., Pahr, D., & Zysset, P. (2022). Influence of aging on mechanical properties of the femoral neck using an inverse method. Bone Reports, 17, Article 101638. https://doi.org/10.1016/j.bonr.2022.101638 ( reposiTUm)
Nägl, K., Reisinger, A., & Pahr, D. (2022). The biomechanical behavior of 3D printed human femoral bones based on generic and patient-specific geometries. 3D Printing in Medicine, 8, Article 35. https://doi.org/10.1186/s41205-022-00162-8 ( reposiTUm)
Berger, L., Pahr, D. H., & Synek, A. (2022). Articular contact vs. embedding: Effect of simplified boundary conditions on the stress distribution in the distal radius and volar plate implant loading. Journal of Biomechanics, 143, Article 111279. https://doi.org/10.34726/3544 ( reposiTUm)
Silva-Henao, J. D., Synek, A., Pahr, D., & Reisinger, A. (2022). Selection of animal bone surrogate samples for orthopaedic screw testing based on human radius CT-derived bone morphology. Medical Engineering and Physics, 103, Article 103786. https://doi.org/10.1016/j.medengphy.2022.103786 ( reposiTUm)
Zupancic Cepic, L., Frank, M., Reisinger, A., Pahr, D., Zechner, W., & Schedle, A. (2022). Biomechanical finite element analysis of short-implant-supported, 3-unit, fixed CAD/CAM prostheses in the posterior mandible. International Journal of Implant Dentistry, 8(1), Article 8. https://doi.org/10.1186/s40729-022-00404-8 ( reposiTUm)
Sinzinger, F., van Kerkvoorde Jelle, Pahr, D. H., & Moreno, R. (2022). Predicting the trabecular bone apparent stiffness tensor with spherical convolutional neural networks. Bone Reports, 16, Article 101179. https://doi.org/10.1016/j.bonr.2022.101179 ( reposiTUm)
Aryeetey, O. J., Frank, M., Lorenz, A., Estermann, S.-J., Reisinger, A., & Pahr, D. H. (2022). A parameter reduced adaptive quasi-linear viscoelastic model for soft biological tissue in uniaxial tension. Journal of the Mechanical Behavior of Biomedical Materials, 126, Article 104999. https://doi.org/10.1016/j.jmbbm.2021.104999 ( reposiTUm)
Bachmann, S., Dunmore, C., Skinner, M., Pahr, D. H., & Synek, A. (2022). A computational framework for canonical holistic morphometric analysis of trabecular bone. Scientific Reports, 12, Article 5187. https://doi.org/10.1038/s41598-022-09063-6 ( reposiTUm)
Jaksa, L., Pahr, D., Kronreif, G., & Lorenz, A. (2022). Calibration Dependencies and Accuracy Assessment of a Silicone Rubber 3D Printer. Inventions, 7(2), Article 35. https://doi.org/10.3390/inventions7020035 ( reposiTUm)
Steiner, L., Synek, A., & Pahr, D. H. (2022). Femoral Bone Strength Prediction Using Isotopological B-Spline-Transformed Meshes. Biomechanics, 2(1), 125–137. https://doi.org/10.3390/biomechanics2010012 ( reposiTUm)
Steiner, L., Synek, A., & Pahr, D. H. (2021). Femoral strength can be predicted from 2D projections using a 3D statistical deformation and texture model with finite element analysis. Medical Engineering and Physics, 93, 72–82. https://doi.org/10.1016/j.medengphy.2021.05.012 ( reposiTUm)
Synek, A., Baumbach, S. F., & Pahr, D. H. (2021). Towards optimization of volar plate fixations of distal radius fractures: Using finite element analyses to reduce the number of screws. Clinical Biomechanics, 82(105272), 105272. https://doi.org/10.1016/j.clinbiomech.2021.105272 ( reposiTUm)
Jeyakumar, V., Amraish, N., Niculescu-Morzsa, E.-P., Bauer, C., Pahr, D. H., & Nehrer, S. (2021). Decellularized Cartilage Extracellular Matrix Incorporated Silk Fibroin Hybrid Scaffolds for Endochondral Ossification Mediated Bone Regeneration. International Journal of Molecular Sciences, 22(8), 4055. https://doi.org/10.3390/ijms22084055 ( reposiTUm)
Amraish, N., Reisinger, A., & Pahr, D. (2021). A novel specimen shape for measurement of linear strain fields by means of digital image correlation. Scientific Reports, 11(17515). https://doi.org/10.1038/s41598-021-97085-x ( reposiTUm)
Amini, M., Reisinger, A., Hirtler, L., & Pahr, D. (2021). Which experimental procedures influence the apparent proximal femoral stiffness? A parametric study. BMC Musculoskeletal Disorders, 22(815). https://doi.org/10.1186/s12891-021-04656-0 ( reposiTUm)
Frank, M., Grabos, A., Reisinger, A. G., Burr, D. B., Pahr, D. H., Allen, M. R., & Thurner, P. J. (2021). Effects of anti-resorptive treatment on the material properties of individual canine trabeculae in cyclic tensile tests. Bone, 150(115995), 115995. https://doi.org/10.1016/j.bone.2021.115995 ( reposiTUm)
Frank, M., Reisinger, A. G., Pahr, D. H., & Thurner, P. J. (2021). Effects of Osteoporosis on Bone Morphometry and Material Properties of Individual Human Trabeculae in the Femoral Head. JBMR Plus, 5(6). https://doi.org/10.1002/jbm4.10503 ( reposiTUm)
Stipsitz, M., Zysset, P. K., & Pahr, D. H. (2021). Prediction of the Inelastic Behaviour of Radius Segments: Damage-based Nonlinear Micro Finite Element Simulation vs Pistoia Criterion. Journal of Biomechanics, 116(110205), 110205. https://doi.org/10.1016/j.jbiomech.2020.110205 ( reposiTUm)
Estermann, S.-J., Förster-Streffleur, S., Hirtler, L., Streicher, J., Pahr, D. H., & Reisinger, A. (2021). Comparison of Thiel preserved, fresh human, and animal liver tissue in terms of mechanical properties. Annals of Anatomy, 236(151717), 151717. https://doi.org/10.1016/j.aanat.2021.151717 ( reposiTUm)
Jaksa, L., Pahr, D., Kronreif, G., & Lorenz, A. (2021). Development of a Multi-Material 3D Printer for Functional Anatomic Models. International Journal of Bioprinting, 7(4), 145–155. https://doi.org/10.18063/ijb.v7i4.420 ( reposiTUm)
Amraish, N., Reisinger, A., & Pahr, D. H. (2021). A novel specimen shape for measurement of linear strain fields by means of digital image correlation. Scientific Reports, 11, 1–13. https://doi.org/10.1038/s41598-021-97085-x ( reposiTUm)
Synek, A., Lu, S.-C., Nauwelaerts, S., Pahr, D. H., & Kivell, T. L. (2020). Metacarpophalangeal joint loads during bonobo locomotion: model predictions versus proxies. Journal of the Royal Society. Interface, 17(164), 20200032. https://doi.org/10.1098/rsif.2020.0032 ( reposiTUm)
Benca, E., Amini, M., & Pahr, D. H. (2020). Effect of CT imaging on the accuracy of the finite element modelling in bone. European Radiology Experimental, 4(51), Article 51. https://doi.org/10.1186/s41747-020-00180-3 ( reposiTUm)
Steiner, L., Synek, A., & Pahr, D. H. (2020). Comparison of different microCT-based morphology assessment tools using human trabecular bone. Bone Reports, 12(100261), 100261. https://doi.org/10.1016/j.bonr.2020.100261 ( reposiTUm)
Dunmore, C. J., Skinner, M. M., Bardo, A., Berger, L. R., Hublin, J.-J., Pahr, D. H., Rosas, A., Stephens, N. B., & Kivell, T. L. (2020). The position of Australopithecus sediba within fossil hominin hand use diversity. Nature Ecology and Evolution, 4(7), 911–918. https://doi.org/10.1038/s41559-020-1207-5 ( reposiTUm)
Iori, G., Schneider, J., Reisinger, A., Heyer, F., Peralta, L., Wyers, C., Glüer, C. C., van den Bergh, J. P., Pahr, D., & Raum, K. (2020). Cortical thinning and accumulation of large cortical pores in the tibia reflect local structural deterioration of the femoral neck. Bone, 137(115446), 115446. https://doi.org/10.1016/j.bone.2020.115446 ( reposiTUm)
Iori, G., Peralta, L., Reisinger, A., Heyer, F., Wyers, C., van den Bergh, J., Pahr, D., & Raum, K. (2020). Femur strength predictions by nonlinear homogenized voxel finite element models reflect the microarchitecture of the femoral neck. Medical Engineering and Physics, 79, 60–66. https://doi.org/10.1016/j.medengphy.2020.03.005 ( reposiTUm)
Estermann, S.-J., Pahr, D. H., & Reisinger, A. (2020). Quantifying tactile properties of liver tissue, silicone elastomers, and a 3D printed polymer for manufacturing realistic organ models. Journal of the Mechanical Behavior of Biomedical Materials, 104(103630), 103630. https://doi.org/10.1016/j.jmbbm.2020.103630 ( reposiTUm)
Pahr, D. H., & Reisinger, A. G. (2020). A Review on Recent Advances in the Constitutive Modeling of Bone Tissue. Current Osteoporosis Reports, 18(6), 696–704. https://doi.org/10.1007/s11914-020-00631-1 ( reposiTUm)
Reisinger, A. G., Frank, M., Thurner, P. J., & Pahr, D. H. (2020). A two-layer elasto-visco-plastic rheological model for the material parameter identification of bone tissue. Biomechanics and Modeling in Mechanobiology, 19(6), 2149–2162. https://doi.org/10.1007/s10237-020-01329-0 ( reposiTUm)
Estermann, S.-J., Pahr, D. H., & Reisinger, A. (2020). Hyperelastic and viscoelastic characterization of hepatic tissue under uniaxial tension in time and frequency domain. Journal of the Mechanical Behavior of Biomedical Materials, 112(104038), 104038. https://doi.org/10.1016/j.jmbbm.2020.104038 ( reposiTUm)
Amraish, N., Reisinger, A., & Pahr, D. H. (2020). Robust Filtering Options for Higher-Order Strain Fields Generated by Digital Image Correlation. Applied Mechanics, 1(4), 174–192. https://doi.org/10.3390/applmech1040012 ( reposiTUm)
Amini, M., Reisinger, A., & Pahr, D. H. (2020). Influence of processing parameters on mechanical properties of a 3D‐printed trabecular bone microstructure. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 108(1), 38–47. https://doi.org/10.1002/jbm.b.34363 ( reposiTUm)
Georgiou, L., Dunmore, C. J., Bardo, A., Buck, L. T., Hublin, J.-J., Pahr, D. H., Stratford, D., Synek, A., Kivell, T. L., & Skinner, M. M. (2020). Evidence for habitual climbing in a Pleistocene hominin in South Africa. Proceedings of the National Academy of Sciences, 117(15), 8416–8423. https://doi.org/10.1073/pnas.1914481117 ( reposiTUm)
Skinner, M. M., Georgiou, L., Stratford, D., Dunmore, C. J., Bardo, A., Buck, L. T., Hublin, J.-J., Pahr, D. H., Synek, A., & Kivell, T. L. (2020). Reply to Haeusler et al.: Internal structure of the femur provides robust evidence for locomotor and taxonomic diversity at Sterkfontein. Proceedings of the National Academy of Sciences, 117(46), 28570–28571. https://doi.org/10.1073/pnas.2016647117 ( reposiTUm)
Stipsitz, M., Zysset, P. K., & Pahr, D. H. (2020). Efficient materially nonlinear 𝜇FE solver for simulations of trabecular bone failure. Biomechanics and Modeling in Mechanobiology, 19(3), 861–874. https://doi.org/10.1007/s10237-019-01254-x ( reposiTUm)
Benca, E., Synek, A., Amini, M., Kainberger, F., Hirtler, L., Windhager, R., Mayr, W., & Pahr, D. H. (2019). QCT-based finite element prediction of pathologic fractures in proximal femora with metastatic lesions. Scientific Reports, 9(10305). https://doi.org/10.1038/s41598-019-46739-y ( reposiTUm)
Kluess, D., Soodmand, E., Lorenz, A., Pahr, D., Schwarze, M., Cichon, R., Varady, P. A., Herrmann, S., Buchmeier, B., Schröder, C., Lehner, S., & Kebbach, M. (2019). A round-robin finite element analysis of human femur mechanics between seven participating laboratories with experimental validation. Computer Methods in Biomechanics and Biomedical Engineering, 22(12), 1020–1031. https://doi.org/10.1080/10255842.2019.1615481 ( reposiTUm)
Synek, A., Lu, S.-C., Vereecke, E. E., Nauwelaerts, S., Kivell, T. L., & Pahr, D. H. (2019). Musculoskeletal models of a human and bonobo finger: parameter identification and comparison to in vitro experiments. PeerJ – the Journal of Life & Environmental Sciences, 7(e7470), e7470. https://doi.org/10.7717/peerj.7470 ( reposiTUm)
Synek, A., Dunmore, C. J., Kivell, T. L., Skinner, M. M., & Pahr, D. H. (2019). Inverse remodelling algorithm identifies habitual manual activities of primates based on metacarpal bone architecture. Biomechanics and Modeling in Mechanobiology. https://doi.org/10.1007/s10237-018-1091-y ( reposiTUm)
Iori, G., Schneider, J., Reisinger, A., Heyer, F., Peralta, L., Wyers, C., Gräsel, M., Barkmann, R., Glüer, C. C., van den Bergh, J. P., Pahr, D., & Raum, K. (2019). Large cortical bone pores in the tibia are associated with proximal femur strength. PLoS ONE, 14(4), e0215405. https://doi.org/10.1371/journal.pone.0215405 ( reposiTUm)
Georgiou, L., Kivell, T. L., Pahr, D. H., Buck, L. T., & Skinner, M. M. (2019). Trabecular architecture of the great ape and human femoral head. Journal of Anatomy, 234(5), 679–693. https://doi.org/10.1111/joa.12957 ( reposiTUm)
Soodmand, E., Kluess, D., Varady, P. A., Cichon, R., Schwarze, M., Gehweiler, D., Niemeyer, F., Pahr, D., & Woiczinski, M. (2018). Interlaboratory comparison of femur surface reconstruction from CT data compared to reference optical 3D scan. BioMedical Engineering OnLine, 17(29). https://doi.org/10.1186/s12938-018-0461-0 ( reposiTUm)
Klintström, E., Klintström, B., Pahr, D., Brismar, T. B., Smedby, Ö., & Moreno, R. (2018). Direct Estimation of Human Trabecular Bone Stiffness Using Cone Beam Computed Tomography. Oral Surgery, Oral Medicine, Oral Pathology and Oral Radiology, 126(1), 72–82. https://doi.org/10.1016/j.oooo.2018.03.014 ( reposiTUm)
Frank, M., Marx, D., Nedelkovski, V., Fischer, J.-T., Pahr, D. H., & Thurner, P. J. (2018). Dehydration of individual bovine trabeculae causes transition from ductile to quasi-brittle failure mode. Journal of the Mechanical Behavior of Biomedical Materials, 87, 296–305. https://doi.org/10.1016/j.jmbbm.2018.07.039 ( reposiTUm)
Lu, S.-C., Vereecke, E. E., Synek, A., Pahr, D. H., & Kivell, T. L. (2018). A novel experimental design for the measurement of metacarpal bone loading and deformation and fingertip force. PeerJ – the Journal of Life & Environmental Sciences, 6(e5480), e5480. https://doi.org/10.7717/peerj.5480 ( reposiTUm)
Synek, A., & Pahr, D. H. (2018). Plausibility and parameter sensitivity of micro-finite element-based joint load prediction at the proximal femur. Biomechanics and Modeling in Mechanobiology. https://doi.org/10.1007/s10237-017-0996-1 ( reposiTUm)
Tsegai, Z. J., Skinner, M. M., Pahr, D. H., Hublin, J.-J., & Kivell, T. L. (2018). Systemic patterns of trabecular bone across the human and chimpanzee skeleton. Journal of Anatomy, 232(4), 641–656. https://doi.org/10.1111/joa.12776 ( reposiTUm)
Tsegai, Z. J., Skinner, M. M., Gee, A. H., Pahr, D. H., Treece, G. M., Hublin, J.-J., & Kivell, T. L. (2017). Trabecular and Cortical Bone Structure of the Talus and Distal Tibia in Pan and Homo. American Journal of Physical Anthropology, 163(4), 784–805. http://hdl.handle.net/20.500.12708/146722 ( reposiTUm)
Benca, E., Reisinger, A. G., Patsch, J., Hirtler, L., Synek, A., Stenicka, S., Windhager, R., Mayr, W., & Pahr, D. H. (2017). Effect of Simulated Metastatic Lesions on the Biomechanical Behavior on the Proximal Femur. Journal of Orthopaedic Research, 35(11), 2407–2414. http://hdl.handle.net/20.500.12708/147020 ( reposiTUm)
Hosseini, H. S., Dünki, A., Fabech, J., Stauber, M., Vilayphiou, N., Pahr, D., Pretterklieber, M., Wandel, J., Rietbergen, B. van, & Zysset, P. K. (2017). Fast Estimation of Colles’ Fracture Load of the Distal Section of the Radius by Homogenized Finite Element Analysis Based on HR-pQCT. Bone, 97, 65–75. https://doi.org/10.1016/j.bone.2017.01.003 ( reposiTUm)
Benca, E., Patsch, J. M., Mayr, W., Pahr, D. H., & Windhager, R. (2016). The Insufficiencies of Risk Analysis of Impending Pathological Fractures in Patients with Femoral Metastases: A Literature Review. Bone Reports, 5, 51–56. https://doi.org/10.1016/j.bonr.2016.02.003 ( reposiTUm)
Synek, A., & Pahr, D. H. (2016). The Effect of the Extensor Mechanism on Maximum Isometric Fingertip Forces: A Numerical Study on the Index Finger. Journal of Biomechanics, 49(14), 3423–3429. https://doi.org/10.1016/j.jbiomech.2016.09.004 ( reposiTUm)
Dall’Ara, E., Eastell, R., Viceconti, M., Pahr, D., & Yang, L. (2016). Experimental Validation of DXA-Based Finite Element Models for Prediction of Femoral Strengt. Journal of the Mechanical Behavior of Biomedical Materials, 63, 17–25. https://doi.org/10.1016/j.jmbbm.2016.06.004 ( reposiTUm)
Moreno, R., Smedby, Ö., & Pahr, D. H. (2016). Prediction of Apparent Trabecular Bone Stiffness Through Fourth-Order Fabric Tensors. Biomechanics and Modeling in Mechanobiology, 15(4), 831–844. https://doi.org/10.1007/s10237-015-0726-5 ( reposiTUm)
Klintström, E., Klintström, B., Moreno, R., Brismar, T. B., Pahr, D. H., & Smedby, Ö. (2016). Predicting Trabecular Bone Stiffness from Clinical Cone-Beam CT and HR-pQCT Data; an In Vitro Study Using Finite Element Analysis. PLoS ONE, 11(8), e0161101. https://doi.org/10.1371/journal.pone.0161101 ( reposiTUm)
Jurkowitsch, J., Dall’Ara, E., Quadlbauer, S., Pezzei, Ch., Jung, I., Pahr, D., & Leixnering, M. (2016). Rotational Stability in Screw-Fixed Scaphoid Fractures Compared to Plate-Fixed Scaphoid Fractures. Archives of Orthopaedic and Trauma Surgery, 136(11), 1623–1628. https://doi.org/10.1007/s00402-016-2556-z ( reposiTUm)
Stephens, N. B., Kivell, T. L., Gross, T., Pahr, D. H., Hublin, J.-J., Hershkovitz, I., & Skinner, M. M. (2016). Trabecular Architecture in the Thumb of Pan and Homo: Implications for Investigating Hand Use, Loading, and Hand Preference in the Fossil Record. American Journal of Physical Anthropology, 161, 603–619. http://hdl.handle.net/20.500.12708/150065 ( reposiTUm)
Cejka, D., Parada-Rodriguez, D., Pichler, S., Marculescu, R., Kramer, I., Kneissel, M., Gross, T., Reisinger, A. G., Pahr, D. H., Monier-Faugere, M.-C., Haas, M., & Malluche, H. H. (2016). Only minor differences in renal osteodystrophy features between wild-type and sclerostin knockout mice with chronic kidney disease. Kidney International, 90(4), 828–834. https://doi.org/10.1016/j.kint.2016.06.019 ( reposiTUm)
Synek, A., Chevalier, Y., Schröder, C., Pahr, D. H., & Baumbach, S. F. (2016). Biomechanical Testing of Distal Radius Fracture Treatments: Boundary Conditions Significantly Affect the Outcome of In Vitro Experiments. Journal of Applied Biomechanics, 32(2), 210–214. https://doi.org/10.1123/jab.2015-0117 ( reposiTUm)
Pahr, D. H., & Zysset, P. K. (2016). Finite Element-Based Mechanical Assessment of Bone Quality on the Basis of In Vivo Images. Current Osteoporosis Reports, 14(6), 374–385. https://doi.org/10.1007/s11914-016-0335-y ( reposiTUm)
Panyasantisuk, J., Pahr, D. H., & Zysset, P. K. (2016). Effect of Boundary Conditions on Yield Properties of Human Femoral Trabecular Bone. Biomechanics and Modeling in Mechanobiology, 15(5), 1043–1053. https://doi.org/10.1007/s10237-015-0741-6 ( reposiTUm)
Schwiedrzik, J. J., Gross, T., Bina, M., Pretterklieber, M., Zysset, P. K., & Pahr, D. H. (2016). Experimental Validation of a Nonlinear μFE Model Based on Cohesive-Frictional Plasticity for Trabecular Bone. International Journal for Numerical Methods in Biomedical Engineering, 32(4). http://hdl.handle.net/20.500.12708/148660 ( reposiTUm)
Latypova, A., Maquer, G., Elankumaran, K., Pahr, D., Zysset, P. K., Pioletti, D. P., & Terrier, A. (2016). Identification of Elastic Properties of Human Patellae Using Micro-Finite Element Analysis. Journal of Biomechanics, 49(13), 3111–3115. https://doi.org/10.1016/j.jbiomech.2016.07.031 ( reposiTUm)
Skinner, M. M., Stephens, N. B., Tsegai, Z. J., Foote, A. C., Nguyen, H. N., Gross, T., Pahr, D. H., Hublin, J.-J., & Kivell, T. L. (2015). Human-Like Hand Use in Australopithecus Africanus. Science, 23(347), 395–399. http://hdl.handle.net/20.500.12708/150529 ( reposiTUm)
Muschitz, C., Kocijan, R., Pahr, D., Patsch, J. M., Amrein, K., Misof, B. M., Kaider, A., Resch, H., & Pietschmann, P. (2015). Ibandronate Increases Sclerostin Levels and Bone Strength in Male Patiens with Idiopathic Osteoporosis. Calcified Tissue International and Musculoskeletal Research, 96(6), 477–489. https://doi.org/10.1007/s00223-015-0003-8 ( reposiTUm)
Muschitz, C., Kocijan, R., Haschka, J., Pahr, D., Kaider, A., Pietschmann, P., Hans, D., Muschitz, G. K., Fahrleitner-Pammer, A., & Resch, H. (2015). TBS Reflects Trabecular Microarchitecture in Premenopausal Women and Men with Idiopathic Osteoporosis and Low-Traumatic Fractures. Bone, 79, 259–266. https://doi.org/10.1016/j.bone.2015.06.007 ( reposiTUm)
Baumbach, S. F., Synek, A., Traxler, H., Mutschler, W., Pahr, D., & Chevalier, Y. (2015). The Influence of Distal Screw Length on the Primary Stability of Volar Plate Osteosynthesis - A Biomechanical Study. Journal of Orthopaedic Surgery and Research, 10(139). https://doi.org/10.1186/s13018-015-0283-8 ( reposiTUm)
Synek, A., Chevalier, Y., Baumbach, S. F., & Pahr, D. H. (2015). The Influence of Bone Density and Anisotropy in Finite Element Models of Distal Radius Fracture Osteosynthesis: Evaluations and Comparison to Experiments. Journal of Biomechanics, 48(15), 4116–4123. https://doi.org/10.1016/j.jbiomech.2015.10.012 ( reposiTUm)
Zysset, P., Pahr, D., Engelke, K., Genant, H. K., McClung, M. R., Kendler, D. L., Recknor, C., Kinzl, M., Schwiedrzik, J., Museyko, O., Wang, A., & Libanati, C. (2015). Comparison of Proximal Femur and Vertebral Body Strength Improvements in the FREEDOM Trial Using an Alternative Finite Element Methodology. Bone, 81, 122–130. https://doi.org/10.1016/j.bone.2015.06.025 ( reposiTUm)
Panyasantisuk, J., Pahr, D. H., Gross, T., & Zysset, P. K. (2015). Comparison of Mixed and Kinematic Uniform Boundary Conditions in Homogenized Elasticity of Femoral Trabecular Bone Using Microfinite Element Analyses. Journal of Biomechanical Engineering, 137(1). https://doi.org/10.1115/1.4028968 ( reposiTUm)
Varga, P., Hesse, B., Langer, M., Schrof, S., Männike, N., Suhonen, H., Pacareanu, A., Pahr, D. H., Peyrin, F., & Raum, K. (2015). Synchrotron X-Ray Phase Nano-Tomography-Based Analysis of the Lacunar-Canaliicular Network Morphology and its Relation to the Strains Experienced by Osteocytes in Situ as Predicted by Case-Specific Finite Element Analysis. Biomechanics and Modeling in Mechanobiology, 14(2), 267–282. https://doi.org/10.1007/s10237-014-0601-9 ( reposiTUm)
Huynh Nguyen, N., Pahr, D. H., Gross, T., Skinner, M. M., & Kivell, T. L. (2014). Micro-Finite Element (μFE) Modeling of the Siamang (Symphalangus syndactylus) Third Proximal Phalanx: The Functional Role of Curvature and the Flexor Sheath Ridge. Journal of Human Evolution, 67, 60–75. https://doi.org/10.1016/j.jhevol.2013.12.008 ( reposiTUm)
Gross, T., Kivell, T. L., Skinner, M. M., Nguyen, H. N., & Pahr, D. H. (2014). A CT-Image-Based Framework for the Holistic Analysis of Cortical and Trabecular Bone Morphology. Palaeontologia Electronica, 17(3), 13. http://hdl.handle.net/20.500.12708/156979 ( reposiTUm)
Luisier, B., Dall’Ara, E., & Pahr, D. H. (2014). Orthotropic HR-pQCT-Based FE Models Improve Strength Predictions for Stance but not for Side-Way Fall Loading Compared to Isotropic QCT-Based FE Models of Human Femurs. Journal of the Mechanical Behavior of Biomedical Materials, 32, 287–299. https://doi.org/10.1016/j.jmbbm.2014.01.006 ( reposiTUm)
Skrna-Jakl, I. C., Pahr, D. H., Karner, K. H., & Rammerstorfer, F. G. (2014). Homogenization Technique for the Efficient Modeling of Large Scale Corrugated Core Sandwich Structures. International Journal of Applied Physics and Mathematics, 4(1), 62–67. https://doi.org/10.7763/ijapm.2014.v4.256 ( reposiTUm)
Pahr, D. H., Schwiedrzik, J., Dall’Ara, E., & Zysset, P. K. (2014). Clinical vs. Pre-Clinical FE Models for Vertebral Body Strength Predictions. Journal of the Mechanical Behavior of Biomedical Materials, 33, 76–83. https://doi.org/10.1016/j.jmbbm.2012.11.018 ( reposiTUm)
Larsson, D., Luisier, B., Kersh, M. E., Dall’Ara, E., Zysset, P. K., Pandy, M. G., & Pahr, D. H. (2014). Assessment of Transverse Isotropy in Clinical-Level CT Images of Trabecular Bone Using the Gradient Structure Tensor. Annals of Biomedical Engineering, 42(5), 950–959. https://doi.org/10.1007/s10439-014-0983-y ( reposiTUm)
Tsegai, Z. J., Kivell, T. L., Gross, T., Nguyen, N. H., Pahr, D. H., Smaers, J. B., & Skinner, M. M. (2013). Trabecular Bone Structure Correlates with Hand Posture and Use in Hominoids. PLoS ONE, 8(11), e78781. https://doi.org/10.1371/journal.pone.0078781 ( reposiTUm)
Kinzl, M., Wolfram, U., & Pahr, D. H. (2013). Identification of a Crushable Foam Material Model and Application to Strength and Damage Prediction of Human Femur and Vertebral Body. Biomedical Materials, 26, 136–147. https://doi.org/10.1016/j.jmbbm.2013.04.026 ( reposiTUm)
Kersh, M. E., Zysset, P. K., Pahr, D. H., Wolfram, U., Larsson, D., & Pandy, M. G. (2013). Measurement of Structrual Anisotropy in Femoral Trabecular Bone Using Clinical-Resolution CT Images. Journal of Biomechanics, 46(15), 2659–2666. https://doi.org/10.1016/j.jbiomech.2013.07.047 ( reposiTUm)
Dall´Ara, E., Luisier, B., Schmidt, R., Pretterklieber, M., Kainberger, F., Zysset, P., & Pahr, D. (2013). DXA predictions of human femoral mechanical properties depend on the load configuration. Medical Engineering and Physics, 35(11), 1564–1572. https://doi.org/10.1016/j.medengphy.2013.04.008 ( reposiTUm)
Pahr, D. H., & Zysset, P. K. (2013). FE-Simulation in der klinischen Osteoporoseforschung. Osteologie, 22(1), 7–12. http://hdl.handle.net/20.500.12708/154809 ( reposiTUm)
Gross, T., Pahr, D. H., & Zysset, P. K. (2013). Morphology-Elasticity Relationships Using Decreasing Fabric Information of Human Trabecular Bone from Three Major Anatomical Locations. Biomechanics and Modeling in Mechanobiology, 12(4), 793–800. https://doi.org/10.1007/s10237-012-0443-2 ( reposiTUm)
Spiesz, E. M., Reisinger, A. G., Kaminsky, W., Roschger, P., Pahr, D. H., & Zysset, P. K. (2013). Computational and Experimental Methodology for Site-Matched Investigations of the Influence of Mineral mass Fraction and Collagen Orientation on the Axial Indentation Modulus of Lamellar Bone. Journal of the Mechanical Behavior of Biomedical Materials, 28, 195–205. https://doi.org/10.1016/j.jmbbm.2013.07.004 ( reposiTUm)
Pahr, D. H., & Zysset, P. K. (2013). FE-Simulation in der klinischen Osteoporoseforschung: Möglichkeiten und Trends. Journal Für Mineralstoffwechsel, 20(3), 95–100. http://hdl.handle.net/20.500.12708/155290 ( reposiTUm)
Dall’Ara, E., Luisier, B., Schmidt, R., Kainberger, F., Zysset, P., & Pahr, D. (2013). A Nonlinear QCT-Based Finite Element Model Validation Study for the Human Femur Tested in Two Configurations in Vitro. Bone, 52(1), 27–38. https://doi.org/10.1016/j.bone.2012.09.006 ( reposiTUm)
Dall’Ara, E., Karl, C., Mazza, G., Franzoso, G., Vena, P., Pretterklieber, M., Pahr, D., & Zysset, P. (2013). Tissue Properties of the Human Vertebral Body Sub-Structures Evaluated by Means of Microindentation. Journal of the Mechanical Behavior of Biomedical Materials, 25, 23–32. https://doi.org/10.1016/j.jmbbm.2013.04.020 ( reposiTUm)
Kinzl, M., Schwiedrzik, J., Zysset, P. K., & Pahr, D. H. (2013). An Experimentally Validated Finite Element Method for Augmented Vertebral Bodies. Clinical Biomechanics, 28(1), 15–22. https://doi.org/10.1016/j.clinbiomech.2012.09.008 ( reposiTUm)
Zysset, P. K., Dall’Ara, E., Varga, P., & Pahr, D. H. (2013). Finite Element Analysis for Prediction of Bone Strength. BoneKEy Reports, 2. https://doi.org/10.1038/bonekey.2013.120 ( reposiTUm)
Bilik, C., Pahr, D. H., & Rammerstorfer, F. G. (2012). A Bead Laying Algorithm for Enhancing the Stability and Dynamic Behavior of Thin-Walled Structures. Acta Mechanica, 223(8), 1621–1631. https://doi.org/10.1007/s00707-012-0645-9 ( reposiTUm)
Kinzl, M., Boger, A., Zysset, P. K., & Pahr, D. H. (2012). The Mechanical Behavior of PMMA/Bone Specimens Extracted from Augmented Vertebrae: A Numerical Study of Interface Properties, PMMA Shrinkage and Trabecular Bone Damage. Journal of Biomechanics, 45(8), 1478–1484. https://doi.org/10.1016/j.jbiomech.2012.02.012 ( reposiTUm)
Kinzl, M., Benneker, L. M., Boger, A., Zysset, P. K., & Pahr, D. H. (2012). The Effect of Standard and Low-Modulus Cement Augmentation on the Stiffness, Strength, and Endplate Pressure Distribution in Vertebroplasty. European Spine Journal, 21(5), 920–929. https://doi.org/10.1007/s00586-011-2119-5 ( reposiTUm)
Dall’Ara, E., Pahr, D., Varga, P., Kainberger, F., & Zysset, P. (2012). QCT-Based Finite Element Models Predict Human Vertebral Strength in Vitro Significantly Better than Simulated DEXA. Osteoporosis International, 23(2), 563–572. https://doi.org/10.1007/s00198-011-1568-3 ( reposiTUm)
Hosseini, H. S., Pahr, D. H., & Zysset, P. K. (2012). Modeling and Experimental Validation of Trabecular Bone Damage, Softening and Densification under Large Compressive Strains. Journal of the Mechanical Behavior of Biomedical Materials, 15, 93–102. https://doi.org/10.1016/j.jmbbm.2012.06.005 ( reposiTUm)
Gross, T., Pahr, D. H., Peyrin, F., & Zysset, P. K. (2012). Mineral Heterogeneity has a Minor Influence on the Apparent Elastic Properties of Human Cancellous Bone: A SRμCT-Based Finite Element Study. Computer Methods in Biomechanics and Biomedical Engineering, 15(11), 1137–1144. https://doi.org/10.1080/10255842.2011.581236 ( reposiTUm)
Wolfram, U., Gross, T., Pahr, D. H., Schwiedrzik, J., Wilke, H.-J., & Zysset, P. K. (2012). Fabric-Based Tsai-Wu Yield Criteria for Vertebral Trabecular Bone in Stress and Strain Space. Journal of the Mechanical Behavior of Biomedical Materials, 15, 218–228. https://doi.org/10.1016/j.jmbbm.2012.07.005 ( reposiTUm)
Pahr, D. H., Dall’Ara, E., Varga, P., & Zysset, P. K. (2012). HR-pQCT-Based Homogenised Finite Element Models Provide Quantitative Predictions of Experimental Vertebral Body Stiffness and Strength with the Same Accuracy as μFE Models. Computer Methods in Biomechanics and Biomedical Engineering, 15(7), 711–720. https://doi.org/10.1080/10255842.2011.556627 ( reposiTUm)
Reisinger, A. G., Pahr, D. H., & Zysset, P. K. (2011). Principal Stiffness Orientation and Degree of Anisotropy of Human Osteons Based on Nanoindentation in Three Distinct Planes. Journal of the Mechanical Behavior of Biomedical Materials, 4(8), 2113–2127. https://doi.org/10.1016/j.jmbbm.2011.07.010 ( reposiTUm)
Reisinger, A. G., Pahr, D. H., & Zysset, P. K. (2011). Elastic Anisotropy of Bone Lamellae as a Function of Fibril Orientation Pattern. Biomechanics and Modeling in Mechanobiology, 10(1), 67–77. https://doi.org/10.1007/s10237-010-0218-6 ( reposiTUm)
Varga, P., Dall’Ara, E., Pahr, D. H., Pretterklieber, M., & Zysset, P. K. (2011). Validation of an HR-pQCT-Based Homogenized Finite Element Approach Using Mechanical Testing of Ultra-Distal Radius Sections. Biomechanics and Modeling in Mechanobiology, 10(4), 431–444. https://doi.org/10.1007/s10237-010-0245-3 ( reposiTUm)
Kinzl, M., Boger, A., Zysset, P. K., & Pahr, D. H. (2011). The Effects of bone and Pore Volume Fraction on the Mechanical Properties of PMMA/Bone Biopsies Extracted from Augmented Vertebrae. Journal of Biomechanics, 44(15), 2732–2736. https://doi.org/10.1016/j.jbiomech.2011.07.028 ( reposiTUm)
Dall´Ara, E., Varga, P., Pahr, D. H., & Zysset, P. K. (2011). A Calibration Methodology of QCT BMD for Human Vertebral Body with Registered Micro-CT Images. Medical Physics, 38(5), 2602–2608. http://hdl.handle.net/20.500.12708/161966 ( reposiTUm)
Reisinger, A. G., Pahr, D. H., & Zysset, P. K. (2010). Sensitivity Analysis and Parametric Study of Elastic Properties of an Unidirectional Mineralized Bone Fibril-Array Using Mean Field Methods. Biomechanics and Modeling in Mechanobiology, 9(5), 499–510. https://doi.org/10.1007/s10237-010-0190-1 ( reposiTUm)
Dall’Ara, E., Schmidt, R., Pahr, D., Varga, P., Chevalier, Y., Patsch, J., Kainberger, F., & Zysset, P. (2010). A Nonlinear Finite Element Model Validation Study Based on a Novel Experimental Technique for Inducing Anterior Wedge-Shape Fractures in Human Vertebral Bodies. Journal of Biomechanics, 43(12), 2374–2380. https://doi.org/10.1016/j.jbiomech.2010.04.023 ( reposiTUm)
Varga, P., Pahr, D. H., Baumbach, S., & Zysset, P. K. (2010). HR-pQCT Based FE Analysis of the Most Distal Radius Section Provides an Improved Prediction of Colles’ Fracture Load in Vitro. Bone, 47(5), 982–988. https://doi.org/10.1016/j.bone.2010.08.002 ( reposiTUm)
Ucsnik, S., Scheerer, M., Zaremba, S., & Pahr, D. H. (2010). Experimental Investigation of a Novel Hybrid Metal-Composite Joining Technology. Composites Part A: Applied Science and Manufacturing, 41(3), 369–374. https://doi.org/10.1016/j.compositesa.2009.11.003 ( reposiTUm)
Chevalier, Y., Pahr, D., & Zysset, P. K. (2009). The Role of Cortical Shell and Trabecular Fabric in Finite Element Analysis of the Human Vertebral Body. Journal of Biomechanical Engineering, 131(11). https://doi.org/10.1115/1.3212097 ( reposiTUm)
Pahr, D. H., & Zysset, P. K. (2009). A Comparison of Enhanced Continuum FE with Micro FE Models of Human Vertebral Bodies. Journal of Biomechanics, 42(4), 455–462. https://doi.org/10.1016/j.jbiomech.2008.11.028 ( reposiTUm)
Pahr, D. H., & Zysset, P. K. (2009). From High-Resolution CT Data to Finite Element Models: Development of an Integrated Modular Framework. Computer Methods in Biomechanics and Biomedical Engineering, 12(1), 45–57. https://doi.org/10.1080/10255840802144105 ( reposiTUm)
Graeff, C., Chevalier, Y., Charlebois, M., Varga, P., Pahr, D., Nickelsen, T. N., Morlock, M. M., Glüer, C. C., & Zysset, P. K. (2009). Improvements in Vertebral Body Strength Under Teriparatide Treatment Assessed In Vivo by Finite Element Analysis: Results From the EUROFORS Study. Journal of Bone and Mineral Research, 24(10), 1672–1680. https://doi.org/10.1359/jbmr.090416 ( reposiTUm)
Haïat, G., Padilla, F., Svrcekova, M., Chevalier, Y., Pahr, D., Peyrin, F., Laugier, P., & Zysset, P. (2009). Relationship between Ultrasonic Parameters and Apparent Trabecular Bone Elastic Modulus: A Numerical Approach. Journal of Biomechanics, 42(13), 2033–2039. https://doi.org/10.1016/j.jbiomech.2009.06.008 ( reposiTUm)
Varga, P., Baumbach, S., Pahr, D., & Zysset, P. K. (2009). Validation of an Anatomy Specific Finite Element Model of Colles’ Fracture. Journal of Biomechanics, 42(11), 1726–1731. https://doi.org/10.1016/j.jbiomech.2009.04.017 ( reposiTUm)
Chevalier, Y., Charlebois, M., Pahr, D., Varga, P., Heini, P., Schneider, E., & Zysset, P. K. (2008). A Patient-specific finite element methodology to predict damage accumulation in vertebral bodies under axial compression, sagittal flexion and combined loads. Computer Methods in Biomechanics and Biomedical Engineering, 11(5), 477–487. https://doi.org/10.1080/10255840802078022 ( reposiTUm)
Chevalier, Y., Pahr, D., Charlebois, M., Heini, P., Schneider, E., & Zysset, P. (2008). Cement Distribution, Volume and Compliance in Vertebroplasty: Some Answers from an Anatomy-Based Nonlinear Finite Element Study. Spine, 33(16), 1722–1730. https://doi.org/10.1097/brs.0b013e31817c750b ( reposiTUm)
Pahr, D. H., & Zysset, P. K. (2008). Influence of Boundary Conditions on Computed Apparent Elastic Properties of Cancellous Bone. Biomechanics and Modeling in Mechanobiology, 7(6), 463–476. https://doi.org/10.1007/s10237-007-0109-7 ( reposiTUm)
Pahr, D. H., & Böhm, H. J. (2008). Assessment of Mixed Uniform Boundary Conditions for Predicting the Mechanical Behavior of Elastic and Inelastic Discontinuously Reinforced Composites. Computer Modeling in Engineering & Sciences, 34(2), 117–136. https://doi.org/10.3970/cmes.2008.034.117 ( reposiTUm)
Chevalier, Y., Pahr, D., Allmer, H., Charlebois, M., & Zysset, P. (2007). Validation of a Voxel-Based FE Method for Prediction of the Uniaxial Apparent Modulus of Human Trabecular Bone Using Macroscopic Mechanical Tests and Indentation. Journal of Biomechanics, 40(15), 3333–3340. https://doi.org/10.1016/j.jbiomech.2007.05.004 ( reposiTUm)
Rammerstorfer, F. G., Pahr, D. H., Daxner, T., & Vonach, W. K. (2006). Buckling in Thin Walled Micro and Meso Structures of Lightweight Materials and Material Compounds. Computational Mechanics, 37(6), 470–478. https://doi.org/10.1007/s00466-005-0731-0 ( reposiTUm)
Pahr, D. H., & Rammerstorfer, F. G. (2006). Buckling of Honeycomb Sandwiches: Periodic Finite Element Considerations. Computer Modeling in Engineering & Sciences, 12(3), 229–241. http://hdl.handle.net/20.500.12708/174107 ( reposiTUm)
Schuecker, C., Pahr, D. H., & Pettermann, H. E. (2006). Accounting for Residual Stresses in FEM Analyses of Laminated Structures Using the Puck Criterion for Three-Axial Stress States. Composites Science and Technology, 66(13), 2054–2062. https://doi.org/10.1016/j.compscitech.2005.12.024 ( reposiTUm)
Pahr, D. H., Böhm, H. J., Humer, K., & Weber, H. W. (2005). Analytical and finite element investigations of shear/compression test fixtures. Cryogenics, 45(9), 606–616. https://doi.org/10.1016/j.cryogenics.2004.12.002 ( reposiTUm)
Rosenkranz, P., Humer, K., Weber, H. W., Pahr, D. H., & Rammerstorfer, F. G. (2001). Static and Dynamic Scaling Experiments on Double Lap Shear Specimens at Room Temperature and at 77 K. Cryogenics, 41(1), 21–25. https://doi.org/10.1016/s0011-2275(01)00042-x ( reposiTUm)

Beiträge in Tagungsbänden

Bachmann, S., Pahr, D., & Synek, A. (2023). Homogenized FE Models Can Predict Hip Joint Loading Using Inverse Bone Remodeling at the Femoral Head. In ESB 2023 : 28th Congress of the European Society of Biomechanics : Book of Abstracts (pp. 65–65). European Society of Biomechanics. ( reposiTUm)
Pahr, D., Bachmann, S., & Synek, A. (2023). Mixed uniform boundary conditions improve homogenized FE models of bone-screws and inverse remodelling. In ESB 2023 : 28th Congress of the European Society of Biomechanics : Abstracts. 28th Congress of the European Society of Biomechanics (ESB2023), Maastricht, Netherlands (the). European Society of Biomechanics. ( reposiTUm)
Synek, A., Schwarz, G., Reisinger, A., Huber, S., Nürnberger, S., Hirtler, L., Hofstätter, J., & Pahr, D. (2023). Predicting femoral bone strength after cephalomedullary nail removal with FE models using pre-operative CT scans. In X International Conference on Computational Bioengineering (ICCB 2023) : Programme & Book of Abstracts (pp. 33–33). ( reposiTUm)
Synek, A., Ortner, L. U., & Pahr, D. (2023). Towards unbiased and accurate simulations of screw-bone constructs with homogenized FE models. In ESB 2023 : 28th Congress of the European Society of Biomechanics : Abstracts. 28th Congress of the European Society of Biomechanics, Maastricht, Netherlands (the). European Society of Biomechanics. ( reposiTUm)
Stefanek, P., Pahr, D., & Synek, A. (2023). Simplified screw-bone interface models for computationally efficient µFE simulations. In ESB 2023 : 28th Congress of the European Society of Biomechanics : Abstracts. 28th Congress of the European Society of Biomechanics (ESB2023), Maastricht, Netherlands (the). European Society of Biomechanics. ( reposiTUm)
Iori, G., Schneider, J., Heyer, F., Wyers, C., Glüer, C. C., van den Bergh, J., Pahr, D., & Raum, K. (2019). Cortical Bone Thinning at the Tibia Reflects Femoral Neck Structural Deterioration. In Book of Abstracts of the 25th Congress of the European Society of Biomechanics (p. 274). TU Verlag. http://hdl.handle.net/20.500.12708/67998 ( reposiTUm)
Synek, A., Lu, S.-C., Kivell, T. L., Nauwelaerts, S., & Pahr, D. H. (2019). Metacarpophalangeal Joint Loads of Bonobos During Different Locomotor Modes: Proxies vs. Model Predictions. In Book of Abstracts of the 25th Congress of the European Society of Biomechanics (p. 25). TU Verlag. http://hdl.handle.net/20.500.12708/67990 ( reposiTUm)
Sinzinger, F., Pahr, D. H., & Moreno, R. (2019). Predicting the Trabecular Bone Stiffness Tensor with Spherical Convolutional Neural Networks. In Book of Abstracts of the 25th Congress of the European Society of Biomechanics (p. 164). TU Verlag. http://hdl.handle.net/20.500.12708/67992 ( reposiTUm)
Synek, A., Lu, S.-C., Vereecke, E. E., Kivell, T. L., & Pahr, D. H. (2019). Identifying Optimal Tendon Path Parameters Of A Musculoskeletal Human Finger Model. In Book of Abstracts of the 25th Congress of the European Society of Biomechanics (p. 447). TU Verlag. http://hdl.handle.net/20.500.12708/68004 ( reposiTUm)
Steiner, L., & Pahr, D. H. (2019). Statistical Deformation Model Based Estimation of 3D Models from 2D Projections Can Be Used to Predict Human Femoral Strength. In Book of Abstracts of the 25th Congress of the European Society of Biomechanics (p. 634). TU Verlag. http://hdl.handle.net/20.500.12708/68005 ( reposiTUm)
Reisinger, A. G., Frank, M., Thurner, P. J., & Pahr, D. (2019). Elasto-Visco-Plastic Material Parameters of Single Trabeculae Identified by Rheological Modelling. In Book of Abstracts of the 25th Congress of the European Society of Biomechanics (p. 182). TU Verlag. http://hdl.handle.net/20.500.12708/67994 ( reposiTUm)
Amini, M., Reisinger, A. G., & Pahr, D. (2019). Effect of Selected Scan Parameters on QCT-Based BMD Estimations of a Femur. In Book of Abstracts of the 25th Congress of the European Society of Biomechanics (p. 314). TU Verlag. http://hdl.handle.net/20.500.12708/68000 ( reposiTUm)
Frank, M., Reisinger, A. G., Pahr, D. H., & Thurner, P. J. (2019). Tensile Mechanical Properties of Human Individual Trabeculae of Non- and Osteopororotic Fracture Donors. In Book of Abstracts of the 25th Congress of the European Society of Biomechanics (p. 685). TU Verlag. http://hdl.handle.net/20.500.12708/68006 ( reposiTUm)
Estermann, S.-J., Müller-Guttenbrunn, C., Pahr, D. H., & Reisinger, A. G. (2019). Macroindentation of Liver Tissue and 3D Printing Materials for Comparison of Tactile Properties. In Book of Abstracts of the 25th Congress of the European Society of Biomechanics (p. 230). TU Verlag. http://hdl.handle.net/20.500.12708/67996 ( reposiTUm)
Amraish, N., Reisinger, A. G., & Pahr, D. H. (2019). Accuracy And Precision of Full-Field Surface Strain Measurements. In Book of Abstracts of the 25th Congress of the European Society of Biomechanics (p. 223). TU Verlag. http://hdl.handle.net/20.500.12708/67995 ( reposiTUm)
Stipsitz, M., Zysset, P. K., & Pahr, D. (2019). Failure Behavior of Trabecular Bone Based on Materially Nonlinear Micro FE Simulations. In Book of Abstracts of the 25th Congress of the European Society of Biomechanics (p. 270). TU Verlag. http://hdl.handle.net/20.500.12708/67997 ( reposiTUm)
Lorenz, A., Steiner, L., Freidhager, C., Leichtle, U. G., & Pahr, D. (2019). Comparison of Different Methods for Automatic Landmark Detection From 2D Images, 3D Images or 3D Surface Meshes. In Book of Abstracts of the 25th Congress of the European Society of Biomechanics (p. 165). TU Verlag. http://hdl.handle.net/20.500.12708/67993 ( reposiTUm)
Frank, M., Marx, D., Pahr, D. H., & Thurner, P. J. (2017). Mechanical Properties of Individual Trabeculae in a Physiological Environment. In R. Kiss & P. J. Thurner (Eds.), Proceedings of the IASTED International Conference Biomedical Engineering (BioMed2017) (pp. 141–146). ACTA Press, Calgary, AB. http://hdl.handle.net/20.500.12708/67612 ( reposiTUm)
Pahr, D. H., Wolfram, U., & Kinzl, M. (2014). A Crushable Foam Material Model for Strength Predictions of Human Bone. In Abstracts of the 11th World Congress on Compuational Mechanics. 11th World Congress on Compuational Mechanics (WCCM XI), Barcelona, EU. CIMNE. http://hdl.handle.net/20.500.12708/67029 ( reposiTUm)
Dall´Ara, E., Zysset, P. K., & Pahr, D. H. (2014). Prediction of Spine and Hip Strength with BMD and FE Models: Influence of Gender. In Abstracts of the 11th World Congress on Compuational Mechanics. 11th World Congress on Compuational Mechanics (WCCM XI), Barcelona, EU. CIMNE. http://hdl.handle.net/20.500.12708/67027 ( reposiTUm)
Gross, T., Gusenbauer, C., Synek, A., & Pahr, D. H. (2014). CT Image Acquisition for Implant Modeling in Bone Biomechanics. In Conference on Industrial Computed Tomography (pp. 319–320). Shaker Verlag. http://hdl.handle.net/20.500.12708/66986 ( reposiTUm)
Gross, T., & Pahr, D. H. (2013). Influence of Mesh Size and Element Type on Apparent Yield Properties of microCT Based Finite Element Models of Human Trabecular Bone. In J. M. R. S. Tavares & R. M. Natal Jorge (Eds.), Computational Vision and Medical Image Processing VIPimage 2013 (pp. 415–417). CRC Press/Balkema. http://hdl.handle.net/20.500.12708/66849 ( reposiTUm)
Skrna-Jakl, I. C., Pahr, D. H., & Rammerstorfer, F. G. (2012). Multiscale Computational Design of Large Scale Corrugated Core Sandwich Structures. In J. Eberhardsteiner, H. J. Böhm, & F. G. Rammerstorfer (Eds.), CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) (p. 2). TU Wien. http://hdl.handle.net/20.500.12708/66574 ( reposiTUm)
Pahr, D. H. (2012). Linear and Nonlinear μFE Models of Human Bones: Revisiting Methods, Simulation Issues, Selected Results. In J. Eberhardsteiner, H. J. Böhm, & F. G. Rammerstorfer (Eds.), CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) (p. 2). TU Wien. http://hdl.handle.net/20.500.12708/66582 ( reposiTUm)
Reiter, M., Truong, H.-L., Dustdar, S., Karastoyanova, D., Krause, R., Leymann, F., & Pahr, D. (2012). On Analyzing Quality of Data Influences on Performance of Finite Elements Driven Computational Simulations. In C. Kaklamanis, T. Papatheodorou, & P. G. Spirakis (Eds.), Euro-Par 2012 Parallel Processing (pp. 793–804). Springer. https://doi.org/10.1007/978-3-642-32820-6_79 ( reposiTUm)
Dall´Ara, E., Luisier, B., Pretterklieber, M., Kainberger, F., Zysset, P. K., & Pahr, D. H. (2012). A Nonlinear Finite Element Model Validation Study for the Human Femur. In J. Eberhardsteiner, H. J. Böhm, & F. G. Rammerstorfer (Eds.), CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) (p. 2). TU Wien. http://hdl.handle.net/20.500.12708/66580 ( reposiTUm)
Bilik, C., Pahr, D. H., & Rammerstorfer, F. G. (2010). A Bead Laying Algorithm for Enhancing the Dynamic and Stability Behaviour of Thin Shell Structures. In 37th SolMech 2010 Book of Abstracts (pp. 302–303). Polish Academy of Science. http://hdl.handle.net/20.500.12708/66123 ( reposiTUm)
Kinzl, M., Benneker, L., Boger, A., & Pahr, D. H. (2010). The Effect of Material Behavior and Placement of Bone Cement on the Stiffness, Strength and Endplate Load Transfer in Vertebroplasty. In 44. DGBMT Jahrestagung (p. 4). Biomed.Tech. http://hdl.handle.net/20.500.12708/66140 ( reposiTUm)
Kinzl, M., Benneker, L., & Pahr, D. H. (2010). The Effect of Material Behavior and Placement of Bone Cement on the Mechanical Behavior and Load Transfer of Augmented Vertebral Bodies. In H. Kaiser & R. Kirner (Eds.), Proceedings of the Junior Scientist Conference 2010 (pp. 263–264). http://hdl.handle.net/20.500.12708/66070 ( reposiTUm)
Reisinger, A. G., Pahr, D. H., & Zysset, P. K. (2010). Anisotropy of Bone Lamellae. In H. Kaiser & R. Kirner (Eds.), Proceedings of the Junior Scientist Conference 2010 (pp. 155–156). http://hdl.handle.net/20.500.12708/66068 ( reposiTUm)
Reisinger, A. G., Pahr, D. H., & Zysset, P. K. (2010). The Anisotropy of Bone Lamellae as a Function of Diverse Fibril Orientation Patterns. In C. T. Lim & J. C. H. Goh (Eds.), 6th World Congress of Biomechanics (WCB 2010) (pp. 1667–1670). Springer-Verlag. http://hdl.handle.net/20.500.12708/66120 ( reposiTUm)
Böhm, H. J., Pahr, D. H., Nogales, S., & Gándara, M. B. (2008). Comparison of Unit Cell and Windowing Methods for Obtaining Estimates on Macroscopic Elasticity Tensors of Inhomogeneous Materials. In Y.-B. Yang, L.-J. Leu, C.-S. Chen, & P.-C. Su (Eds.), Proceedings of the 11th East Asia-Pacific Conference on Structural Engineering and Construction (p. 5). National Taiwan University. http://hdl.handle.net/20.500.12708/65792 ( reposiTUm)
Rammerstorfer, F. G., Bitsche, R. D., Daxner, T., Fischer, F. D., Flatscher, T., & Pahr, D. H. (2008). Computational Stability Analysis - Bridging the Length Scales. In Y.-B. Yang (Ed.), Proceedings of the Taiwan-Austria Joint Workshop on Computational Mechanics of Materials and Structures (pp. 28–30). National Taiwan University. http://hdl.handle.net/20.500.12708/65793 ( reposiTUm)
Pahr, D. H., & Böhm, H. J. (2008). Assessment of Mixed Uniform Boundary Conditions for Predicting the Macroscopic Mechanical Behavior of Composite Materials. In Proceedings of ECCM 13 (p. 10). http://hdl.handle.net/20.500.12708/65746 ( reposiTUm)
Ucsnik, S., Gradinger, R., Noster, U., & Pahr, D. H. (2008). Finite-Element-Methods Based Optimization of a Novel Composite-Metal Joint. In Proceedings of the 1st EUCOMAS (pp. 371–379). VDI-Verlag. http://hdl.handle.net/20.500.12708/65736 ( reposiTUm)
Pahr, D. H., & Rammerstorfer, F. G. (2007). Analytical and Computational Models for Investigations of Local Buckling in Honeycomb Sandwiches. In T. Chandra, K. Tsuzaki, C. Ravindran, & M. Militzer (Eds.), Thermec 2006, Materials Science Forum Vols. 539-543 (pp. 2467–2472). Trans Tech Publications Ltd. http://hdl.handle.net/20.500.12708/65443 ( reposiTUm)
Pahr, D. H. (2006). Hierarchical Modeling of Composite Aeroplane Structures. In K. Kemmochi, M. Hojo, & H. Tsuda (Eds.), Proceedings of Nano-Macro Interactive Solution and Hybrid Technology for Practical Application, Advanced Fiber Science and Textile Technology (pp. 91–94). http://hdl.handle.net/20.500.12708/65408 ( reposiTUm)
Pahr, D. H., & Böhm, H. J. (2005). Modelling Residual Stresses of Perforated Woven Laminates Using FEM. In F. Ziegler, R. Heuer, & C. Adam (Eds.), Proceedings of the Sixth International Congress on Thermal Stresses (pp. 787–790). http://hdl.handle.net/20.500.12708/65219 ( reposiTUm)
Rammerstorfer, F. G., Daxner, T., Pahr, D. H., & Vonach, W. (2005). Shell and Truss Structures on the Micro- and Meso-Level of Lightweight Materials. In E. Ramm, W. A. Wall, K.-U. Bletzinger, & M. Bischoff (Eds.), Extended Abstracts of the 5th International Conference on Computation of Shell and Spatial Structures (p. 4). http://hdl.handle.net/20.500.12708/65220 ( reposiTUm)
Pahr, D., Daxner, T., Rammerstorfer, F. G., & Böhm, H. J. (2001). On Micro/Meso/Macro Modeling of Composite Lightweight Materials and Structures. In S. Valliappan & N. Khalili (Eds.), Computational Mechanics–New Frontiers for the New Millennium (pp. 753–762). Elsevier. https://doi.org/10.1016/b978-0-08-043981-5.50114-0 ( reposiTUm)

Beiträge in Büchern

Rodríguez, J., Weinbub, J., Pahr, D., Rupp, K., & Selberherr, S. (2013). Distributed High-Performance Parallel Mesh Generation with ViennaMesh. In P. Manninen & P. Öster (Eds.), Applied Parallel and Scientific Computing (pp. 548–552). Springer Berlin Heidelberg. https://doi.org/10.1007/978-3-642-36803-5_44 ( reposiTUm)
Flatscher, T., Daxner, T., Pahr, D. H., & Rammerstorfer, F. G. (2011). Optimization of Corrugated Paperboard under Local and Global Buckling Constraints. In R. de Borst & E. Ramm (Eds.), Multiscale Methods in Computational Mechanics (pp. 329–346). Springer-Verlag. http://hdl.handle.net/20.500.12708/26921 ( reposiTUm)
Böhm, H. J., Pahr, D. H., & Daxner, T. (2009). Analytical and Numerical Methods for Modeling the Thermomechanical and Thermophysical Behavior of Microstructured Materials. In V. V. Silberschmidt (Ed.), Computational and Experimental Mechanics of Advanced Materials (pp. 167–223). Springer-Verlag. https://doi.org/10.1007/978-3-211-99685-0_5 ( reposiTUm)
Daxner, T., Pahr, D. H., & Rammerstorfer, F. G. (2008). Micro- and Meso-Instabilities in Structured Materials and Sandwich Structures. In B. G. Falzon & M. H. Aliabadi (Eds.), Buckling and Postbuckling Structures: Experimental, Analytical and Numerical Studies (pp. 453–495). Imperial College Press. http://hdl.handle.net/20.500.12708/26092 ( reposiTUm)

Bücher

Thurner, P. J., Pahr, D., & Hellmich, C. (Eds.). (2019). Book of Abstracts of the 25th Congress of the European Society of Biomechanics (ESB 2019). TU Verlag. http://hdl.handle.net/20.500.12708/24614 ( reposiTUm)

Präsentationen

Bachmann, S., Pahr, D., & Synek, A. (2024, February 21). Inverse Bone (Re)modelling:  A tool to acquire physiological loading conditions of bones in vivo [Conference Presentation]. 1st Faculty Science Day of the Faculty of Mechanical and Industrial Engineering, Wien, Austria. ( reposiTUm)
Reisinger, A., Pichler, M., & Pahr, D. (2023, May 23). Viscoelasticity of menisci measured by relaxation [Conference Presentation]. Network meeting of the ESB Austrian Chapter 2023, Salzburg, Austria. ( reposiTUm)
Bachmann, S., Pahr, D., & Synek, A. (2023, December 12). Inverse Bone Remodelling: Towards Predicting the Hip Joint Pressure Distribution [Poster Presentation]. Biannual ViCEM Meeting, Wien, Austria. ( reposiTUm)
Rathgeb, J., Synek, A., Schmölz, L., Popp, D., Pahr, D., & Nia, A. (2023, May 23). Bone adaptation at the distal radius after volar plate removal: a pilot study using HR-pQCT scans [Conference Presentation]. Scientific Meeting of the 2023 Austrian Chapter of ESB, Salzburg, Austria. ( reposiTUm)
Haslinger, K., Bittner-Frank, M., Pahr, D., & Thurner, P. (2023, July 11). Mechanical Properties of Individual Osteoporotic and Control Trabeculae in Compression [Conference Presentation]. 28th Congress of the European Society of Biomechanics, Maastricht, Netherlands (the). http://hdl.handle.net/20.500.12708/193364 ( reposiTUm)
Bachmann, S., Pahr, D., & Synek, A. (2022, June 29). Homogenized-FE-based Inverse Bone Remodeling: Modified Optimization Criterion and Evaluation on the Distal Radius [Conference Presentation]. ESB 2022 - 27th Congress of the European Society of Biomechanics, Porto, Portugal. ( reposiTUm)
Haslinger, K., Thurner, P., Pahr, D., & Frank, M. (2022, September 28). A new compression test set-up for measuring visco-elastic material properties of individual trabeculae in physiological conditions [Conference Presentation]. Joint Annual Conference of the Austrian (ÖGBMT), German (VDE DGBMT) and Swiss (SSBE) Societies for Biomedical Engineering, Austria. http://hdl.handle.net/20.500.12708/152569 ( reposiTUm)
Bachmann, S., Pahr, D., & Synek, A. (2022, September). Inverse bone remodeling allows for prediction of physiological peak joint loads using clinically feasible homogenized finite element models [Presentation]. Joint KMM-VIN / ViCEM / ESB Cross-disciplinary Workshop on Biomedical and Bioinspired Materials and Structures: A Cross-Disciplinary Approach, Austria. ( reposiTUm)
Berger, L., Pahr, D., & Synek, A. (2022, June 27). Articular contact vs. embedding: the effect of boundary conditions on volar plate fixation at the distal radius [Conference Presentation]. ESB 2022 - 27th Congress of the European Society of Biomechanics, Porto, Portugal. http://hdl.handle.net/20.500.12708/152325 ( reposiTUm)
Stefanek, P., Synek, A., Dall´Ara, E., & Pahr, D. (2022, June). Validation of linear and materially nonlinear μFE predicted displacement fields of bone biopsies using DVC [Conference Presentation]. ESB 2022 - 27th Congress of the European Society of Biomechanics, Porto, Portugal. ( reposiTUm)
Aryeetey, O. J., Frank, M., Lorenz, A., & Pahr, D. (2022, June). Fracture toughness determination of muscle tissue based on AQLV model derived viscous dissipated energy [Conference Presentation]. ESB 2022 - 27th Congress of the European Society of Biomechanics, Porto, Portugal. ( reposiTUm)
Amraish, N., & Pahr, D. (2022, June). New insights into high-resolution strain fields of trabecular bone using digital image correlation [Conference Presentation]. ESB 2022 - 27th Congress of the European Society of Biomechanics, Porto, Portugal. ( reposiTUm)
Haslinger, K., Frank, M., Pahr, D., & Thurner, P. (2022, July). Novel method to obtain mechanical properties of isolated trabeculae under compression in wet condition [Conference Presentation]. ESB 2022 - 27th Congress of the European Society of Biomechanics, Porto, Portugal. ( reposiTUm)
Reisinger, A. G., Frank, M., Thurner, P., & Pahr, D. (2022, June 28). Damage in single trabeculae under tension identified by inverse rheological modelling [Conference Presentation]. ESB 2022 - 27th Congress of the European Society of Biomechanics, Porto, Portugal. http://hdl.handle.net/20.500.12708/152390 ( reposiTUm)
Nägl Katharina, Reisinger, A. G., & Pahr, D. (2022, June). Biomechanical failure behaviour of 3D printed femoral bones compared to artificial and human bones [Conference Presentation]. ESB 2022 - 27th Congress of the European Society of Biomechanics, Porto, Portugal. http://hdl.handle.net/20.500.12708/152377 ( reposiTUm)
Voumard Benjamin, Stefanek, P., Pretterklieber, M. L., Pahr, D., & Zysset, P. (2022, June). Influence of ageing on micromechanical properties of the femoral neck using the inverse method [Conference Presentation]. ESB 2022 - 27th Congress of the European Society of Biomechanics, Porto, Portugal. http://hdl.handle.net/20.500.12708/152638 ( reposiTUm)
Frank, M., Aryeetey, O. J., Estermann, S.-J., & Pahr, D. (2022, June 27). Adaptive quasi-linear model – universal material parameters of liver tissue for different load cases? [Poster Presentation]. ESB 2022 - 27th Congress of the European Society of Biomechanics, Porto, Portugal. http://hdl.handle.net/20.500.12708/152303 ( reposiTUm)
Bachmann, S., Synek, A., & Pahr, D. H. (2021). A novel method for quantitative and statistical comparison of local differences in bone morphometry. 17th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering (CMBBE 2021), Bonn, EU. http://hdl.handle.net/20.500.12708/95552 ( reposiTUm)
Synek, A., Baumbach, S. F., & Pahr, D. H. (2021). Towards optimization of volar plate fixations of distal radius fractures: using finite element analyses to reduce the number of screws. 29th Annual Meeting of the EUROPEAN ORTHOPAEDIC RESEARCH SOCIETY, Rome, EU. http://hdl.handle.net/20.500.12708/95555 ( reposiTUm)
Pahr, D. H., Zysset, P. K., & Stipsitz, M. (2021). Efficient non-linear micro FE: results from trabecular biopsies and human radius sections. 17th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering (CMBBE 2021), Bonn, EU. http://hdl.handle.net/20.500.12708/95551 ( reposiTUm)
Estermann, S.-J., Förster-Streffleur, S., Hirtler, L., Streicher, J., Pahr, D. H., & Reisinger, A. G. (2021). Viscoelastic properties of human liver: influence of Thiel preservation and comparison with animal tissue. 26th Congress of the European Society of Biomechanics - ESBiomech, Mailand, Italy. http://hdl.handle.net/20.500.12708/95527 ( reposiTUm)
Amraish, N., Reisinger, A. G., & Pahr, D. H. (2021). Measurement Of Linear Strain Fields By Means Of Digital Image Correlation. 26th Congress of the European Society of Biomechanics - ESBiomech, Mailand, Italy. http://hdl.handle.net/20.500.12708/95526 ( reposiTUm)
Stipsitz, M., Zysset, P. K., & Pahr, D. H. (2021). Influence of Stress Redistributions in μFEA on the Predicted Failure Load of Radius Segments. 26th Congress of the European Society of Biomechanics - ESBiomech, Mailand, Italy. http://hdl.handle.net/20.500.12708/95529 ( reposiTUm)
Aryeetey, O. J., Frank, M., & Pahr, D. H. (2021). Reduced Parameter Adaptive Quasi-Linear Viscoelastic (AQLV) Model of Soft Biological Tissue. 26th Congress of the European Society of Biomechanics - ESBiomech, Mailand, Italy. http://hdl.handle.net/20.500.12708/95530 ( reposiTUm)
Synek, A., Baumbach, S. F., & Pahr, D. H. (2021). Towards optimization of plate fracture fixations at the distal radius: Using FEA to reduce the number of screws. 26th Congress of the European Society of Biomechanics - ESBiomech, Mailand, Italy. http://hdl.handle.net/20.500.12708/95528 ( reposiTUm)
Frank, M., Aryeetey, O. J., & Pahr, D. H. (2021). Usage of the Abaqus ‐ adaptive quasi‐ linear viscoelastic model for arbitrary load prediction. 26th Congress of the European Society of Biomechanics - ESBiomech, Mailand, Italy. http://hdl.handle.net/20.500.12708/95568 ( reposiTUm)
Silva-Henao, J. D., Pahr, D. H., & Reisinger, A. G. (2021). Bone sample selection for screw mechanical testing based on peri-implant CT morphometry. 26th Congress of the European Society of Biomechanics - ESBiomech, Mailand, Italy. http://hdl.handle.net/20.500.12708/95571 ( reposiTUm)
Stipsitz, M., Synek, A., Stefanek, P., & Pahr, D. (2020). Non-linear micro FE in bone biomechanics. Scientific Meeting of the Austrian Chapter of ESB, online / Zoom, Austria. http://hdl.handle.net/20.500.12708/95405 ( reposiTUm)
Skrna-Jakl, I. C., & Pahr, D. H. (2019). Influence of specific core reinforcement designs on the stiffness behaviour of hybrid core sandwich panels. 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2019), Vienna, Austria. http://hdl.handle.net/20.500.12708/95101 ( reposiTUm)
Stipsitz, M., & Pahr, D. H. (2019). An efficient solver for CT based nonlinear microFE simulations of trabecular structures. 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2019), Vienna, Austria. http://hdl.handle.net/20.500.12708/95102 ( reposiTUm)
Kivell, T. L., Dunmore, C. J., Lu, S.-C., Synek, A., Bardo, A., Bird, E., Deckers, K., Key, A., Pahr, D. H., & Skinner, M. M. (2019). Signals of Locomotion and Manipulation in the Internal Trabecular Bone Structure of Extant Hominoids and Fossil Hominins. International Congress of Vertebrate Morphology (ICVM), Prague, Czechia. http://hdl.handle.net/20.500.12708/95128 ( reposiTUm)
Estermann, S.-J., Müller-Guttenbrunn, C., Pahr, D., & Reisinger, A. G. (2019). Comparison of tactile properties of liver tissue and potential 3D printing materials via macroindentation. 11. Kongress der Deutschen Gesellschaft für Biomechanik (DGfB 2019), Berlin, Germany. http://hdl.handle.net/20.500.12708/95113 ( reposiTUm)
Lorenz, A., Freidhager, C., Leichtle, U. G., & Pahr, D. (2019). Krümmungsbasierte Detektion anatomischer Landmarken und Achsen am menschlichen Kniegelenk. 11. Kongress der Deutschen Gesellschaft für Biomechanik (DGfB 2019), Berlin, Germany. http://hdl.handle.net/20.500.12708/95114 ( reposiTUm)
Pahr, D., Synek, A., Stipsitz, M., & Steiner, L. (2019). Micro FE in bone biomechanics - Recent advances. 11. Kongress der Deutschen Gesellschaft für Biomechanik (DGfB 2019), Berlin, Germany. http://hdl.handle.net/20.500.12708/95112 ( reposiTUm)
Klüß, D., Soodmand, E., Lorenz, A., Pahr, D., Schwarze, M., Cichon, R., Varady, P., Herrmann, S., Buchmeier, B., Schröder, C., Lehner, S., & Kebbach, M. (2019). Ein Finite-Elemente-Ringversuch zur Biomechanik des humanen Femur zwischen sieben teilnehmenden Laboren mit experimenteller Validierung. 11. Kongress der Deutschen Gesellschaft für Biomechanik (DGfB 2019), Berlin, Germany. http://hdl.handle.net/20.500.12708/95115 ( reposiTUm)
Synek, A., Lu, S.-C., Vereecke, E. E., Kivell, T. L., & Pahr, D. (2019). Identifikation optimaler Parameter eines muskuloskelettalen Fingermodells. Deutscher Kongress für Orthopädie und Unfallchirurgie 2019, Berlin, Germany. http://hdl.handle.net/20.500.12708/95184 ( reposiTUm)
Amini, M., & Pahr, D. (2018). Influence of size-scaling on the mechanical behavior of printed bone microstructure. The First International Conference on Materials, Mimicking, Manufacturing from and for Bio Application, Milan, Italy, EU. http://hdl.handle.net/20.500.12708/94880 ( reposiTUm)
Pahr, D. (2018). Comparison of morphological analysis software systems. ECTS 2018, Valencia, EU. http://hdl.handle.net/20.500.12708/94877 ( reposiTUm)
Pahr, D. (2018). A Simple Multi-Material Domain Iso-surface Mesher for Medical Images. 8th World Congress of Biomechanics, WCB 2018, Dublin, EU. http://hdl.handle.net/20.500.12708/94899 ( reposiTUm)
Synek, A., Dunmore, C. J., Kivell, T. L., Skinner, M. M., & Pahr, D. (2018). Using an inverse bone remodelling approach to predict joint loads: Sensitive enough to detect different habitual activities? 8th World Congress of Biomechanics, WCB 2018, Dublin, EU. http://hdl.handle.net/20.500.12708/94901 ( reposiTUm)
Pahr, D. H. (2018). Bone density frequency models - new insights into age, sex and treatment related changes. Austrian Bone Conference 2018, Wien, Austria. http://hdl.handle.net/20.500.12708/94985 ( reposiTUm)
Pahr, D. H. (2018). Image processing, modeling, and simulation. Additive Manufacturing in Medicine - 1st Symposium, Wien, Austria. http://hdl.handle.net/20.500.12708/94986 ( reposiTUm)
Skrna-Jakl, I. C., & Pahr, D. H. (2018). Numerical Investigations of the Out-of-plane Stiffness Behavior of Hybrid Core Sandwich Panels. 13th World Congress on Computational Mechanics (WCCM2018), New York, Non-EU. http://hdl.handle.net/20.500.12708/94902 ( reposiTUm)
Tsegai, Z. J., Skinner, M. M., Pahr, D. H., Hublin, J.-J., & Kivell, T. L. (2018). Trabecular bone ontogeny in the forelimb and hindlimb of chimpanzees. 8th Annual Meeting of the European Society for the study of Human Evolution (ESHE), Faro, Portugal, EU. http://hdl.handle.net/20.500.12708/94983 ( reposiTUm)
Reisinger, A. G., & Pahr, D. (2018). Visco-Plastic Mechanical Properties of Implanted Bone Screws Identified by Rheological Modeling. 8th World Congress of Biomechanics, WCB 2018, Dublin, EU. http://hdl.handle.net/20.500.12708/94900 ( reposiTUm)
Amini, M., Reisinger, A. G., & Pahr, D. (2018). An enhanced biomechanical femoral test setup to study multiple loading configurations in stance and sideways fall orientations on the same specimen. 8th World Congress of Biomechanics, WCB 2018, Dublin, EU. http://hdl.handle.net/20.500.12708/94898 ( reposiTUm)
Pahr, D. H., Amini, M., & Reisinger, A. G. (2018). Biomechanical measurement of the fracture risk of a human femur in multiple load directions based on DIC. The First International Conference on Materials, Mimicking, Manufacturing from and for Bio Application, Milan, Italy, EU. http://hdl.handle.net/20.500.12708/94879 ( reposiTUm)
Stipsitz, M., Zysset, P. K., & Pahr, D. H. (2018). An efficient solver for large-scale simulations of voxel-based structures using a nonlinear damage material model. 6th European Conference on Computational Mechanics (Solids, Structures and Coupled Problems) (ECCM 6), Glasgow, UK, EU. http://hdl.handle.net/20.500.12708/94878 ( reposiTUm)
Pahr, D. H. (2017). Creating FE Models from CT Data. 21st International Bone Densitometry Workshop & 7th European Symposium on Ultrasonic Characterization of Bone, Kloster Banz, EU. http://hdl.handle.net/20.500.12708/94841 ( reposiTUm)
Stephens, N. B., Kivell, T. L., Pahr, D. H., Hublin, J.-J., & Skinner, M. M. (2017). Trabecular Bone Patterning across the Human Hand: Implications for Reconstructing Behaviour and Manipulation in Past Populations. 7th Annual Meeting of the European Society for the study of Human Evolution, Leiden, EU. http://hdl.handle.net/20.500.12708/94843 ( reposiTUm)
Dunmore, C. J., Kivell, T. L., Pahr, D. H., & Skinner, M. M. (2017). Trabecular Morphology Across the Hominoid Metacarpus Reflects Distinct Locomotor Strategies. 7th Annual Meeting of the European Society for the study of Human Evolution, Leiden, EU. http://hdl.handle.net/20.500.12708/94842 ( reposiTUm)
Lu, S.-C., Vereeke, E., Synek, A., Pahr, D. H., & Kivell, T. L. (2017). Reconstructing Hand Use in Fossil Hominins: Validating Musculoskeletal and Finite Element Models of the Third Digit for Precision Grasping and Locomotion. 7th Annual Meeting of the European Society for the study of Human Evolution, Leiden, EU. http://hdl.handle.net/20.500.12708/94756 ( reposiTUm)
Amini, M., & Pahr, D. H. (2017). Parameters Affecting 3D Printing of Bone Structures. 23rd Congress of the European Society of Biomechanics, Sevilla, EU. http://hdl.handle.net/20.500.12708/94674 ( reposiTUm)
Pahr, D. H. (2017). Computational Bone Biomechanics - Is this an Innovation we Need to Manage Osteoporosis in Future? 23rd Congress of the European Society of Biomechanics, Sevilla, EU. http://hdl.handle.net/20.500.12708/94676 ( reposiTUm)
Iori, G., Reisinger, A. G., Peralta, L., Raum, K., & Pahr, D. H. (2017). Stiffness Coefficients of Compressive and Bending Nature During Quasi-Static Mechanical Tests of the Hip. 23rd Congress of the European Society of Biomechanics, Sevilla, EU. http://hdl.handle.net/20.500.12708/94675 ( reposiTUm)
Soodmand, E., Kluess, D., Varady, P., Cichon, R., Schwarze, M., Gehweiler, D., Pahr, D. H., & Woiczinski, M. (2017). Benchmark Accuracy Assessment of CT Image-Based Reconstructed Human Femur Using 3D Optical Scan. 23rd Congress of the European Society of Biomechanics, Sevilla, EU. http://hdl.handle.net/20.500.12708/94672 ( reposiTUm)
Steiner, L., & Pahr, D. H. (2017). Creation of Smooth Meshes with Homologous Regions based on Free-Form B-Spline Registration. 23rd Congress of the European Society of Biomechanics, Sevilla, EU. http://hdl.handle.net/20.500.12708/94671 ( reposiTUm)
Frank, M., Marx, D., Pahr, D. H., & Thurner, P. J. (2017). Tissue Mechanical Properties of Bovine Trabeculae in Tension ar Different in a Dry or Wet Environment. 23rd Congress of the European Society of Biomechanics, Sevilla, EU. http://hdl.handle.net/20.500.12708/94669 ( reposiTUm)
Synek, A., & Pahr, D. H. (2017). Parameter Sensitivity and Plausibility of Micro FE Based Joint Load Prediction at the Proximal Femur. 23rd Congress of the European Society of Biomechanics, Sevilla, EU. http://hdl.handle.net/20.500.12708/94668 ( reposiTUm)
Benca, E., Synek, A., Amini, M., Kainberger, F., Windhager, R., Mayr, W., & Pahr, D. H. (2017). Prediction of Pathologic Fractures in Femora with Metastatic Lesions Using QCT-Based Finite Element Analysis. 23rd Congress of the European Society of Biomechanics, Sevilla, EU. http://hdl.handle.net/20.500.12708/94673 ( reposiTUm)
Benca, E., Reisinger, A. G., Patsch, J., Hirtler, L., Synek, A., Stenicka, S., Kainberger, F., Mayr, W., Windhager, R., & Pahr, D. (2017). Fracture Prediction in Patients with Metastatic Lesions in the Femur Using QCT-based Finite Element Analysis. 19th ISOLS General Meeting, Kanazawa, Japan, Non-EU. http://hdl.handle.net/20.500.12708/94854 ( reposiTUm)
Stipsitz, M., Zysset, P. K., & Pahr, D. H. (2017). Simplified Model for Efficient Nonlinear Material Finite Element Simulations of Trabecular Bone. 23rd Congress of the European Society of Biomechanics, Sevilla, EU. http://hdl.handle.net/20.500.12708/94670 ( reposiTUm)
Pahr, D. H. (2016). Biomechanische Simulation und Osteoporose. Osteologie 2016, Essen, EU. http://hdl.handle.net/20.500.12708/94357 ( reposiTUm)
Stephens, N. B., Kivell, T. L., Pahr, D. H., Gee, A. H., Treece, G. M., & Hublin, J.-J. (2016). Signals of Loading and Function in the Human Hand: A Multi-Method Analysis of the External Cortical and Internal Trabecular Bone of the Metacarpals. 85th Annual Meeting of the American Association of Physical Anthropologists, Atlanta, GA, Non-EU. http://hdl.handle.net/20.500.12708/94374 ( reposiTUm)
Pahr, D. H. (2016). Biomechanik der Gelenke. Fachtag Arthrose, Rheuma und Osteoporose 2016, Wien, Austria. http://hdl.handle.net/20.500.12708/94367 ( reposiTUm)
Synek, A., & Pahr, D. H. (2016). The Effect of the Extensor Mechanism for the Force Producing Capabilities of a Human Finger. 22nd Congress of the European Society of Biomechanics (ESB 2016), Lyon, EU. http://hdl.handle.net/20.500.12708/94412 ( reposiTUm)
Pahr, D. H., & Steiner, L. (2016). A Critical Comparison of Micro FE based Bone Remodeling Algorithms. 22nd Congress of the European Society of Biomechanics (ESB 2016), Lyon, EU. http://hdl.handle.net/20.500.12708/94413 ( reposiTUm)
Frank, M., Marx, D., Pahr, D. H., & Thurner, P. J. (2016). Measurement of the Mechanical Tissue Parameters of Individual Trabeculae in a Physiologic Environment. 22nd Congress of the European Society of Biomechanics (ESB 2016), Lyon, EU. http://hdl.handle.net/20.500.12708/94415 ( reposiTUm)
Benca, E., Reisinger, A. G., Patsch, J., Hirtler, L., Synek, A., Stenicka, S., Kainberger, F., Windhager, R., Mayr, W., & Pahr, D. H. (2016). The Effect of Metastatic Lesions on the Biomechanical Behavior of the Femur. 22nd Congress of the European Society of Biomechanics (ESB 2016), Lyon, EU. http://hdl.handle.net/20.500.12708/94414 ( reposiTUm)
Panyasantisuk, J., Dall´Ara, E., Pahr, D. H., & Zysset, P. K. (2016). Mapping of Trabecular Anisotropy Improves QCT-Based Finite Element Estation of Hip Strength in Pooled Stance and Side-Fall Load Configurations. ASBMR 2016 Annual Meeting, Denver, CO, Non-EU. http://hdl.handle.net/20.500.12708/94597 ( reposiTUm)
Baumbach, S. F., Synek, A., Traxler, H., Mutschler, W., Pahr, D. H., & Chevalier, Y. (2015). Biomechanical Evaluation of the Distal Screw Length in Volar Plate Osteosynthesis for the Treatment of Distal Radius Fractures. V. Münchner Symposion für Experimentelle Orthopädie, Unfallchirurgie und Muskuloskelettale Forschung, München, EU. http://hdl.handle.net/20.500.12708/94095 ( reposiTUm)
Tsegai, Z. J., Skinner, M. M., Pahr, D. H., Hublin, J.-J., & Kivell, T. L. (2015). Trabecular Bone Architecture and Distribution in the Talus and Distal Tibia of Homo and Pan. 5th Annual ESHE Meeting, London, EU. http://hdl.handle.net/20.500.12708/94145 ( reposiTUm)
Synek, A., Baumbach, S., & Pahr, D. H. (2015). CT-Based Finite Element Modelling of Plated Distal Radius Fracture Osteosynthesis: Evaluation against Experimental Measurements. 21st Congress of the European Society of Biomechanics, Prag, EU. http://hdl.handle.net/20.500.12708/94125 ( reposiTUm)
Synek, A., Baumbach, S., & Pahr, D. H. (2015). CT-Based Finite Element Models of Locking Plate Fracture Fixations for the Prediction of Stiffness and Screw Loads. 21st Congress of the European Society of Biomechanics, Prag, EU. http://hdl.handle.net/20.500.12708/94126 ( reposiTUm)
Muschitz, C., Kocijan, R., Haschka, J., Pahr, D. H., Kaider, A., Hans, D., & Fahrleitner-Pammer, A. (2015). TBS Reflects Trabecular Microarchitecture in Premenopausal Women adn Similarly Agend Men with Low Traumatic Fractures. ASBMR 2015 Annual Meeting, Seattle, WA, Non-EU. http://hdl.handle.net/20.500.12708/94596 ( reposiTUm)
Synek, A., Chevalier, Y., Binder, J., Baumbach, S. F., & Pahr, D. H. (2015). The Influence of Different Bone Material Modelling Strategies on Finite Element Models of Distal Radius Fracture Osteosynthesis. 9. Jahrestagung der Deutschen Gesellschaft für Biomechanik, Bonn, EU. http://hdl.handle.net/20.500.12708/94091 ( reposiTUm)
Synek, A., Chevalier, Y., Binder, J., Baumbach, S. F., & Pahr, D. H. (2015). The Influence of Bone Density and Orientation on Stiffness Predictions of Distal Radius Fracture Osteosynthesis Using the Finite Element Method. V. Münchner Symposion für Experimentelle Orthopädie, Unfallchirurgie und Muskuloskelettale Forschung, München, EU. http://hdl.handle.net/20.500.12708/94092 ( reposiTUm)
Synek, A., Chevalier, Y., Binder, J., Pahr, D. H., & Baumbach, S. F. (2015). Validierung von Finite Elemente Modellen distaler Radiusfraktur-Osteosynthese: Relevanz der lokalen Knochendichte und -orientierung. Deutscher Kongress für Orthopädie und Unfallchirurgie, Berlin, EU. http://hdl.handle.net/20.500.12708/94166 ( reposiTUm)
Panyasantisuk, J., Pahr, D. H., & Zysset, P. K. (2015). Effect of Micro-FE Boundary Conditions on Quadric Yield Criteria of Human Trabecular Bone. 21st Congress of the European Society of Biomechanics, Prag, EU. http://hdl.handle.net/20.500.12708/94124 ( reposiTUm)
Pahr, D. H. (2014). Patient-Specific Finite Element Modeling of Bone: Validation, Multi-Scale Models, Automatization, and Selected Examples. 7th World Congress of Biomechanics (WCB2014), Boston, MA, Non-EU. http://hdl.handle.net/20.500.12708/93846 ( reposiTUm)
Pahr, D. H. (2014). CT-Based FE Simulations of Composite Materials: Possibilities, Trends, and Applications. 27th International Workshop Research in Mechanics of Composites, Bad Herrenalb, EU. http://hdl.handle.net/20.500.12708/93946 ( reposiTUm)
Pahr, D. H. (2014). Computational Biomechanics at TU-Vienna - Today and Tomorrow. Seminar der AO-Foundation, Davos, Non-EU. http://hdl.handle.net/20.500.12708/93902 ( reposiTUm)
Pahr, D. H. (2014). Bone Imaging - Blick über den Tellerrand. 22. Osteoproseforum der ÖGKM, St. Wolfgang, Austria. http://hdl.handle.net/20.500.12708/93829 ( reposiTUm)
Kivell, T. L., Nguyen, H. N., Tsegai, Z. J., Gross, T., Hublin, J.-J., Pahr, D. H., & Skinner, M. M. (2014). Fossils, Trabeculae and Finite Element Modelling: A Holistic Approach to Reconstructing Behavior in the Past. 83rd Annual Meeting of the American Association of Physical Anthropologists, Calgary, AB, Non-EU. http://hdl.handle.net/20.500.12708/93826 ( reposiTUm)
Synek, A., Chevalier, Y., Schröder, Y., Pahr, D. H., & Baumbach, S. F. (2014). Einfluss der Randbedingungen in biomechanischen Experimenten distaler Radiusfrakturen: Eine biomechanische Studie. 55. Kongress der Deutschen Gesellschaft für Handchirurgie, Baden-Baden, EU. http://hdl.handle.net/20.500.12708/94093 ( reposiTUm)
Baumbach, S. F., Synek, A., Traxler, H., Mutschler, W., Pahr, D. H., & Chevalier, Y. (2014). Biomechanical Evaluation of Distal Volar-Dorsal Screw Length in Colle’s Fractures. 55. Kongress der Deutschen Gesellschaft für Handchirurgie, Baden-Baden, EU. http://hdl.handle.net/20.500.12708/94094 ( reposiTUm)
Skrna-Jakl, I. C., Pahr, D. H., Karner, K.-H., & Rammerstorfer, F. G. (2014). Homogenization Technique for the Efficient Modeling of Large Scale Corrugated Core Sandwich Structures. 4th International Conference on Applied Physics and Mathematics (ICAPM 2104), Singapore, Non-EU. http://hdl.handle.net/20.500.12708/93820 ( reposiTUm)
Gross, T., Bina, M., Schwiedrzik, J. J., Zysset, P. K., & Pahr, D. H. (2014). Non-Linear Micro FE Simulations Based on the ParFEAP Framework. 12th International Symposium on Comupter Methods in Biomechanics and Biomedical Engineering, CMBBE 2014, Amsterdam, EU. http://hdl.handle.net/20.500.12708/93901 ( reposiTUm)
Zysset, P. K., Reisinger, A. G., Spiesz, E., Pahr, D. H., & Schwiedrzik, J. J. (2014). Modeling Scale Transition of Anisotropic Elasticity and Damage in Lamellar Bone. 7th World Congress of Biomechanics (WCB2014), Boston, MA, Non-EU. http://hdl.handle.net/20.500.12708/93850 ( reposiTUm)
Wolfram, U., Schwiedrzik, J. J., Gross, T., Pahr, D. H., Wilke, H.-J., & Zysset, P. K. (2014). A Multiscale Mechanical Approach to Identify Yield Surfaces and Irreversible Properties of Trabecular Bone. 7th World Congress of Biomechanics (WCB2014), Boston, MA, Non-EU. http://hdl.handle.net/20.500.12708/93849 ( reposiTUm)
Pahr, D. H., & Kinzl, M. (2014). An Experimentally Validated Finite Element Method for Augmented Vertebral Bodies. 7th World Congress of Biomechanics (WCB2014), Boston, MA, Non-EU. http://hdl.handle.net/20.500.12708/93847 ( reposiTUm)
Zysset, P. K., Dall´Ara, E., Varga, P., & Pahr, D. H. (2014). QCT-based Finite Element Analysis Provides the Best Surrogate of In Vitro Bone Strength at the Three Major Osteoporotic Fracture Site. 7th World Congress of Biomechanics (WCB2014), Boston, MA, Non-EU. http://hdl.handle.net/20.500.12708/93848 ( reposiTUm)
Stevens, N. H., Kivell, T. L., Nguyen, H. N., Pahr, D. H., Gross, T., Hublin, J.-J., & Skinner, M. M. (2013). Trabecular Bone Architecture in the Thumb of Recent Homo sapiens, Pan, and Late Pleistocene Homo: Taxonomic Differences and Evidence for Handedness. 82ndAnnual Meeting of the American Association of Physical Anthropologists, Knoxville, TN, Non-EU. http://hdl.handle.net/20.500.12708/91441 ( reposiTUm)
Tsegai, Z. J., Kivell, T. L., Gross, T., Nguyen, H. N., Pahr, D. H., & Skinner, M. M. (2013). Identifying Behavioural Signals in Trabecular Bone Structure of the Hominoid Third Metacarpal. European Federation for Primatology Meeting 2013, Antwerpen, EU. http://hdl.handle.net/20.500.12708/91440 ( reposiTUm)
Gross, T., & Pahr, D. H. (2013). CT Based microFE Analysis of Orthopaedic Screw Stability: Real vs. Virtual Implantation. Scanco Medical User Meeting 2013, Appenzell, Non-EU. http://hdl.handle.net/20.500.12708/93660 ( reposiTUm)
Pahr, D. H. (2013). Finite Elemente in der Biomechanik und Orthopädie. Klinikfortbildung der Universitätsklinik für Orthopädie der MedUni Wien, Wien, Austria. http://hdl.handle.net/20.500.12708/93663 ( reposiTUm)
Stevens, N. H., Kivell, T. L., Nguyen, H. N., Gross, T., Pahr, D. H., Hublin, J.-J., & Skinner, M. M. (2013). Trabecular Bone Architecture in the Thumb of Homo and Pan: Handedness and Evidence for Taxonomical Differences. 3rd Meeting of the European Society for the Study of Human Evolution, Wien, Austria. http://hdl.handle.net/20.500.12708/93624 ( reposiTUm)
Nguyen, H. N., Pahr, D. H., Gross, T., Skinner, M. M., & Kivell, T. L. (2013). The Biomechanical Role of Trabecular Bone in the Siamang (Symphalangus syndactylus) Manual Proximal Phalanx. 3rd Meeting of the European Society for the Study of Human Evolution, Wien, Austria. http://hdl.handle.net/20.500.12708/93623 ( reposiTUm)
Tsegai, Z. J., Kivell, T. L., Gross, T., Nguyen, H. N., Pahr, D. H., & Skinner, M. M. (2013). Trabecular Bone Distribution in the Hominoid Third Metacarpal Head Reflects Predicted Loaded Joint Position. 3rd Meeting of the European Society for the Study of Human Evolution, Wien, Austria. http://hdl.handle.net/20.500.12708/93622 ( reposiTUm)
Skrna-Jakl, I. C., Pahr, D. H., & Rammerstorfer, F. G. (2013). Computational Design of Large Scale Corrugated Core Sandwich Structures Employing a Multiscale Analysis Concept. Seminar des Instituts für Mechanik, TU Berlin, Berlin, EU. http://hdl.handle.net/20.500.12708/93621 ( reposiTUm)
Muschitz, C., Pahr, D. H., Kinzl, M., Luisier, B., Zendeli, A., Kocijan, R., Haschka, J., Schima, W., & Resch, H. (2013). Intravenous Ibandronate Increases Femoral and Vertebral Strength Measured by Finite Element Analysis in Male Patients with Idiopathic Osteoporosis and Fragility Fractures. ASMBR 2013 Annual Meeting, Baltimore, MD, Non-EU. http://hdl.handle.net/20.500.12708/93627 ( reposiTUm)
Kinzl, M., Wolfram, U., & Pahr, D. H. (2013). Identification of a Crushable Foam Material Model and Application to Strength and Damage Prediction of Human Femur and Vertebral Body. 8. Jahrestagung der Deutschen Gesellschaft für Biomechanik, Neu-Ulm, EU. http://hdl.handle.net/20.500.12708/93592 ( reposiTUm)
Luisier, B., Dall´Ara, E., & Pahr, D. H. (2013). A Non-Linear HR-pQCT-Based hFE Model Validation Study for the Human Femur Tested in Fall and Stance Configurations. 8. Jahrestagung der Deutschen Gesellschaft für Biomechanik, Neu-Ulm, EU. http://hdl.handle.net/20.500.12708/93593 ( reposiTUm)
Pahr, D. H., Kinzl, M., Dall´Ara, E., Museyko, O., Engelke, K., Panyasantisuk, J., & Zysset, P. K. (2013). Femoral strength Computed from QCT-Based Finite Element Analyses is not Influenced by Voxel or Smooth Mesh Type. ASMBR 2013 Annual Meeting, Baltimore, MD, Non-EU. http://hdl.handle.net/20.500.12708/93626 ( reposiTUm)
Dall´Ara, E., Karl, C., Mazza, G., Franzoso, G., Vena, P., Pretterklieber, M., Pahr, D. H., & Zysset, P. K. (2013). Anisotropy of the Human Vertical Body Sub-Structures Evaluated with Micro-Indentation. 19th Congresss of the European Society of Biomechanics (ESB 2013), Patras, EU. http://hdl.handle.net/20.500.12708/93613 ( reposiTUm)
Dall´Ara, E., Zysset, P. K., & Pahr, D. H. (2013). QCT-Based Homogenized Voxel FE Models Predict Vertebral and Femoral Fracture Load Better than Areal BMD. 19th Congresss of the European Society of Biomechanics (ESB 2013), Patras, EU. http://hdl.handle.net/20.500.12708/93611 ( reposiTUm)
Larsson, D., Luisier, B., Kersh, M. E., Dall´Ara, E., Zysset, P. K., Pandy, M., & Pahr, D. H. (2013). Estimation of Femoral Trabecuar Bone Fabric from QCT Images Depends on the Size of the Region of Interest. 19th Congresss of the European Society of Biomechanics (ESB 2013), Patras, EU. http://hdl.handle.net/20.500.12708/93612 ( reposiTUm)
Pahr, D. H., & Peyker, L. (2012). Micro FE Modelling and Experimental Comparisons of a Bone-Screw used in Volar Plate Osteosynthesis. 10th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Berlin, EU. http://hdl.handle.net/20.500.12708/93326 ( reposiTUm)
Pahr, D. H. (2012). Biomechanics Meets Anthropology. MPI-EVA Workshop on Trabecular Bone, Leipzig, EU. http://hdl.handle.net/20.500.12708/93324 ( reposiTUm)
Pahr, D. H. (2012). FE-Simulation in der klinischen Osteoporoseforschung: Möglichkeiten und Trends. 20. Osteoporoseforum der ÖGKM, St. Wolfgang, Austria. http://hdl.handle.net/20.500.12708/93335 ( reposiTUm)
Dall´Ara, E., Luisier, B., Pretterklieber, M., Kainberger, F., Zysset, P. K., & Pahr, D. H. (2012). Non-Linear QCT-Based FE Models Predict in Vitro Femoral Strength Better than DXA. 2° Meeting del Capitolo Italiano della European Society of Biomechanics, Rom, EU. http://hdl.handle.net/20.500.12708/93361 ( reposiTUm)
Wolfram, U., Gross, T., Wilke, H.-J., Zysset, P. K., & Pahr, D. H. (2012). A Fabric Dependent Tsai-Wu Yield Criterion for Vertebral Trabecular Bone in Strain Space. 18th Congress of the European Society of Biomechanics (ESB2012), Lissabon, EU. http://hdl.handle.net/20.500.12708/93362 ( reposiTUm)
Gross, T., Pahr, D. H., Müller, R., Rubin, M., Bilezikian, J., & Zysset, P. K. (2012). Morphology-Elasticity Relationships in Iliac Crest Biopsies are not Affected by Hyperparathyroidism. 18th Congress of the European Society of Biomechanics (ESB2012), Lissabon, EU. http://hdl.handle.net/20.500.12708/93359 ( reposiTUm)
Pahr, D. H., Schwiedrzik, J. J., & Zysset, P. K. (2012). Clinical Versus Pre-Clinical Finite Element Models for Vertebral Body Strength Prediction. 18th Congress of the European Society of Biomechanics (ESB2012), Lissabon, EU. http://hdl.handle.net/20.500.12708/93357 ( reposiTUm)
Gross, T., Pahr, D. H., & Zysset, P. K. (2012). Morphology-Elasticity Relationships of Human Trabecular Bone in Three Major Anatomical Locations. 2012 ORS Annual Meeting, San Francisco, CA, Non-EU. http://hdl.handle.net/20.500.12708/93337 ( reposiTUm)
Dall´Ara, E., Pahr, D. H., & Zysset, P. K. (2012). QCT-BMD to MicroCT-BV/TV Calibration Relationships are Similar for Human Vertebra and Femur. 18th Congress of the European Society of Biomechanics (ESB2012), Lissabon, EU. http://hdl.handle.net/20.500.12708/93358 ( reposiTUm)
Dall´Ara, E., Schmidt, R., Zysset, P. K., & Pahr, D. H. (2012). Tissue Level Mechanical Properties of Damaged and Intact Human Vertebral Bone Measured by Means of Microindentation. 5. Wiener Biomaterialsymposium, Wien, Austria. http://hdl.handle.net/20.500.12708/93415 ( reposiTUm)
Pahr, D. H. (2011). Nanoindentation und FE-Analyse. Wissenschaftliche Herbsttagung der ÖGKM 2011, Wien, Austria. http://hdl.handle.net/20.500.12708/93226 ( reposiTUm)
Kinzl, M., Boger, A., Zysset, P. K., & Pahr, D. H. (2011). Influences of Pore and Bone Volume Fraction on the Mechanical Properties of Standard and Low-Modulus PMMA/Bone Biopsies Extracted from Augmented Vertebral Bodies. GRIBOI 2011 - The 21st Interdisciplinary Research Conference on Injectable Osteoarticular Biomaterials and Bone Augmentation, Boston, MA, Non-EU. http://hdl.handle.net/20.500.12708/93157 ( reposiTUm)
Pahr, D. H., Dall´Ara, E., & Zysset, P. K. (2011). Validation of a Novel Homogenized Finite Element and µFE Model by Using Experiments on Vertebral Body Slices. CBU 2011, Symposium on Computational Biomechanics in Ulm, Ulm, EU. http://hdl.handle.net/20.500.12708/93202 ( reposiTUm)
Pahr, D. H., & Zysset, P. K. (2011). Voxel-Based Simulations of Human Bones. GAMM - 82nd Annual Meeting, Graz, Austria. http://hdl.handle.net/20.500.12708/93159 ( reposiTUm)
Reisinger, A. G., Pahr, D. H., & Zysset, P. K. (2011). Micromechanics of Lamellar Bone. Dreiländertagung 2011 der ÖGMP, DGMP und SGSMP, Wien, Austria. http://hdl.handle.net/20.500.12708/93209 ( reposiTUm)
Gross, T., Pahr, D. H., Peyrin, F., & Zysset, P. K. (2011). The Influence of Mineral Heterogeneity on the Apparent Elastic Properties of Human Cancellous Bone: A SRµCT Based Finite Element Study. 2011 ORS Annual Meeting, Long Beach, CA, Non-EU. http://hdl.handle.net/20.500.12708/93142 ( reposiTUm)
Pahr, D. H., Dall´Ara, E., Varga, P., & Zysset, P. K. (2011). Stiffness and Strength of Human Vertebrae Predicted by Novel Homogenized and Micro Finite Element Models. ISB 2011 (23rd Congress of the International Society of Biomechanics), Brüssel, EU. http://hdl.handle.net/20.500.12708/93197 ( reposiTUm)
Dall´Ara, E., Pahr, D. H., Varga, P., Kainberger, F., & Zysset, P. K. (2011). Vertebral Strength Prediction With An Increased QCT Resolution: Densitometry Versus FE. 3rd Joint Meeting of ECTS and IBMS, Athen, EU. http://hdl.handle.net/20.500.12708/93182 ( reposiTUm)
Kinzl, M., & Pahr, D. H. (2010). The Effect of Cement Material Properties and Filling Patterns on the Stiffness, Strength and Endplate Load Transfer in Vertebroplasty. Wissenschaftliche Herbsttagung der ÖGKM 2010, Wien, Austria. http://hdl.handle.net/20.500.12708/93034 ( reposiTUm)
Pahr, D. H. (2010). Virtuelle Diagnose - Computersimulation von menschlichen Knochen. HPC-Workshop, Wien, Austria. http://hdl.handle.net/20.500.12708/92967 ( reposiTUm)
Rammerstorfer, F. G., Daxner, T., Fischer, F. D., Flatscher, T., Pahr, D. H., & Todt, M. (2010). Instabilities in Materials at the Nano, Micro and Meso Scale. ECCM2010, European Conference on Computational Mechanics 2010, Paris, EU. http://hdl.handle.net/20.500.12708/92985 ( reposiTUm)
Kinzl, M., Boger, A., Benneker, L., & Pahr, D. H. (2010). Patientenspezifische homogenisierte kontinuumsmechanische und mikromechanische Finite Elemente Methoden zur Prädiktion der Steifigkeit und Festigkeit von mit PMMA Knochenzement augmentierten Wirbelkörpern. 4. Wiener Biomaterialsymposium, Wien, Austria. http://hdl.handle.net/20.500.12708/93027 ( reposiTUm)
Pahr, D. H., & Kinzl, M. (2010). Vertebroplasty: Standard or Low Modulus Cement? 4. Wiener Biomaterialsymposium, Wien, Austria. http://hdl.handle.net/20.500.12708/93028 ( reposiTUm)
Pahr, D. H., & Zysset, P. K. (2010). A Modular Framework for CT-Based Fintite Element Analysis of Human Bones. Virtual Anthropology Meets Biomechanics, Wien, Austria. http://hdl.handle.net/20.500.12708/93016 ( reposiTUm)
Pahr, D. H., Dall´Ara, E., Varga, P., & Zysset, P. K. (2010). Homogenized Continuum-Level Finite Element Models Predict Experimental Vertebral Stiffness and Strength with the Same Accuracy as µFE Models. ESB2010: 17th Congress of the European Society of Biomechanics, Edinburgh, EU. http://hdl.handle.net/20.500.12708/92999 ( reposiTUm)
Pahr, D. H., & Zysset, P. K. (2010). Virtual Diagnosis - Voxel-based Simulations of Human Bones. PMAA’10, 6th International Workshop on Parallel Matrix Algorithms and Applications, Basel, Non-EU. http://hdl.handle.net/20.500.12708/92998 ( reposiTUm)
Varga, P., Pahr, D. H., Dall´Ara, E., Baumbach, S., Pretterklieber, M., & Zysset, P. K. (2010). Calibrated HR-pQCT-Based microFE Models of Ultra-Distal Radius Sections Provide Outstanding Prediction of Experimental Colles’ Fracture Load. ESB2010: 17th Congress of the European Society of Biomechanics, Edinburgh, EU. http://hdl.handle.net/20.500.12708/93000 ( reposiTUm)
Gross, T., Pahr, D. H., Peyrin, F., & Zysset, P. K. (2010). Mineral Heterogeneity has a Minor Influence on the Apparent Elastic Properties of Human Cancellous Bone. Wissenschaftliche Herbsttagung der ÖGKM 2010, Wien, Austria. http://hdl.handle.net/20.500.12708/93033 ( reposiTUm)
Zysset, P. K., Varga, P., Dall´Ara, E., Gross, T., & Pahr, D. H. (2010). A Continuum Finite Element Approach to Predict Stiffness and Strength of Human Bones. 3rd GAMM Seminar on Continuum Biomechanics, Freudenstadt-Lauterbad, EU. http://hdl.handle.net/20.500.12708/93032 ( reposiTUm)
Dall´Ara, E., Pahr, D. H., Varga, P., Kainberger, F., & Zysset, P. K. (2010). Comparison between Clinical Diagnostic Tools and QCT-Based Finite Element Models for Predicting Human Vertebral Apparent Strength in Vitro. 32nd ASMBR Annual Meeting, Toronto, Non-EU. http://hdl.handle.net/20.500.12708/93021 ( reposiTUm)
Dall´Ara, E., Varga, P., Pahr, D. H., & Zysset, P. K. (2010). Local BMD Calibration of Human Vertebrae QCT Using Registered Micro-CT Images. 37th European Symposium on Calcified Tissues, Glasgow, EU. http://hdl.handle.net/20.500.12708/93054 ( reposiTUm)
Kinzl, M., & Pahr, D. H. (2009). The Effect of Cement Material Properties and Filling Patterns on the Stiffness, Strength and Endplate Load Transfer in Vertebroplasty. EuroSpine 2010, Wien, Austria. http://hdl.handle.net/20.500.12708/93003 ( reposiTUm)
Pahr, D. H. (2009). Micro FE of Human Bone. 1st Computational Science and Engineering Workshop, Rust, Austria. http://hdl.handle.net/20.500.12708/92669 ( reposiTUm)
Reisinger, A. G., Pahr, D. H., & Zysset, P. K. (2009). Sensitivitätsanalyse der Steifigkeiten des unidirektionalen Fibrillenverbunds in lamellarem Knochen. Wissenschaftliche Herbsttagung 2009 der Österreichischen Gesellschaft zur Erforschung des Knochens und des Mineralstoffwechsels, Wien, Austria. http://hdl.handle.net/20.500.12708/92860 ( reposiTUm)
Varga, P., Dall´Ara, E., Pahr, D. H., Pretterklieber, M., & Zysset, P. K. (2009). Validation of HR-PQCT Based Finite Element Method on Mechanical Tests of Distal Radius Slices. XXII Congress of the International Society of Biomechanics, Cape Town, Non-EU. http://hdl.handle.net/20.500.12708/92776 ( reposiTUm)
Varga, P., Pahr, D. H., Baumbach, S., & Zysset, P. K. (2009). Colle’s Fracture Load can be Accurately Predicted by Finite Element Models of Ultradistal Sections of the Radius. Wissenschaftliche Herbsttagung 2009 der Österreichischen Gesellschaft zur Erforschung des Knochens und des Mineralstoffwechsels, Wien, Austria. http://hdl.handle.net/20.500.12708/92859 ( reposiTUm)
Haïat, G., Padilla, F., Svrcekova, M., Chevalier, Y., Pahr, D. H., Laugier, P., & Zysset, P. K. (2009). Relation between the Apparent Modulus of Human Trabecular Bone Assessed by Micro Finite Element Analysis and the Ultrasonic Parameter. 2009 International Congress on Ultrasonics, Santiago de Chile, Non-EU. http://hdl.handle.net/20.500.12708/92823 ( reposiTUm)
Chevalier, Y., Pahr, D. H., & Zysset, P. K. (2009). How Cement Modulus and Distribution Change Damage Accumulation after Vertebroplasty: A Nonlinear Finite Element Study Accounting for Cortex and Trabecular Fabric. 55th Annual Meeting of the Orthopaedic Research Society, Las Vegas, NV, Non-EU. http://hdl.handle.net/20.500.12708/92745 ( reposiTUm)
Chevalier, Y., Pahr, D. H., & Zysset, P. K. (2009). Smoothed Voxel-Based Mesh for Patient-Specific Finite Element Models of Human Vertebral Bodies. 17th Annual Symposium on Compuational Methods in Orthopaedic Biomechanics, Las Vegas, NV, Non-EU. http://hdl.handle.net/20.500.12708/92744 ( reposiTUm)
Dall´Ara, E., Schmidt, R., Pahr, D. H., Varga, P., Patsch, J., Chevalier, Y., Kainberger, F., & Zysset, P. K. (2009). An Improved Technique for Inducing Compression Fractures of Vertebral Bodies in Vitro. 36th European Symposium on Calcified Tissues, Wien, Austria. http://hdl.handle.net/20.500.12708/92771 ( reposiTUm)
Varga, P., Baumbach, S., Pahr, D. H., & Zysset, P. K. (2009). Finite Element Models of Human Radius Slices can Accurately Predict Colles’ Fracture Load. 36th European Symposium on Calcified Tissues, Wien, Austria. http://hdl.handle.net/20.500.12708/92770 ( reposiTUm)
Reisinger, A. G., Pahr, D. H., & Zysset, P. K. (2009). Sensitivity Study of Mineralized Bone Fibril-Array Stiffness. 6. Jahrestagung der Deutschen Gesellschaft für Biomechanik, Münster, EU. http://hdl.handle.net/20.500.12708/92762 ( reposiTUm)
Dall´Ara, E., Schmidt, R., Pahr, D. H., Varga, P., Patsch, J., Kainberger, F., & Zysset, P. K. (2009). An Improved Technique for Inducing Compression Fractures of Vertebral Bodies in Vitro. Wissenschaftliche Herbsttagung 2009 der Österreichischen Gesellschaft zur Erforschung des Knochens und des Mineralstoffwechsels, Wien, Austria. http://hdl.handle.net/20.500.12708/92858 ( reposiTUm)
Böhm, H. J., & Pahr, D. H. (2008). On Modeling the Behavior of Non-Periodic Inhomogeneous Volume Elements. 21. Workshop Composite-Forschung in der Mechanik, Bad Herrenalb, EU. http://hdl.handle.net/20.500.12708/92628 ( reposiTUm)
Böhm, H. J., Pahr, D. H., & Daxner, T. (2008). Analytical and Numerical Methods for Modeling the Thermomechanical and Thermophysical Behavior of Microstructured Materials. CISM Course “Computational and Experimental Mechanics of Advanced Materials,” Udine, EU. http://hdl.handle.net/20.500.12708/92575 ( reposiTUm)
Rammerstorfer, F. G., Daxner, T., & Pahr, D. H. (2008). Zelluläre Strukturen in Natur und Technik. 5. Ranshofener Leichtmetalltage 2008, Geinberg, Austria. http://hdl.handle.net/20.500.12708/92536 ( reposiTUm)
Chevalier, Y., Pahr, D. H., & Zysset, P. K. (2008). Anatomy- and Morphology-Based Smooth Finite Element Models of the Vertebral Body. 16th Congress of the European Society of Biomechanics, Luzern, Non-EU. http://hdl.handle.net/20.500.12708/92566 ( reposiTUm)
Varga, P., Baumbach, S., Pahr, D. H., & Zysset, P. K. (2008). Validation of an Anatomy-Specific Finite Element Model of Colle’s Fracture. 16th Congress of the European Society of Biomechanics, Luzern, Non-EU. http://hdl.handle.net/20.500.12708/92567 ( reposiTUm)
Pahr, D. H., & Zysset, P. K. (2008). Comparison of Voxel-Based Micro FE and Different Surface-Based Homogenized FE Models of Human Vertebral Bodies. 8th World Congress on Computational Mechanics (WCCM8) and 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008), Venice, Italy, EU. http://hdl.handle.net/20.500.12708/92558 ( reposiTUm)
Chevalier, Y., Pahr, D. H., & Zysset, P. K. (2008). Comparison of Voxel-Based and Smooth Finite Element Models to Predict Damage Accumulation in Vertebral Bodies. 30th Annual Meeting of the American Society of Bone and Mineral Research, Montréal, Non-EU. http://hdl.handle.net/20.500.12708/92581 ( reposiTUm)
Varga, P., Baumbach, S., Pahr, D. H., & Zysset, P. K. (2008). Anatomy-Specific Finite Element Model of Colle’s Fracture. Wissenschaftliche Herbsstagung der ÖGEKM, Wien, Austria. http://hdl.handle.net/20.500.12708/92609 ( reposiTUm)
Pahr, D. H., Chevalier, Y., Varga, P., & Zysset, P. K. (2008). Modellierungsmöglichkeiten von menschlichen Knochen. 3. Wiener Biomaterialsymposium, TU Wien, Austria. http://hdl.handle.net/20.500.12708/92604 ( reposiTUm)
Graeff, C., Chevalier, Y., Charlebois, M., Varga, P., Pahr, D. H., Nickelsen, T. N., Glüer, C. C., & Zysset, P. K. (2008). Teriparatide Reduces the Size of Regions at High Risk of Failure as Assessed by Non-Linear FE Analysis In Vivo. 18th International Bone Densitometry Workshop, Pugnochiuso, EU. http://hdl.handle.net/20.500.12708/92753 ( reposiTUm)
Haïat, G., Padilla, F., Svrcekova, M., Chevalier, Y., Pahr, D. H., Laugier, P., & Zysset, P. K. (2008). Relation Between the Ultrasonic Parameters and Strength of Human Cancellous Bone: A Numerical Study. 18th International Bone Densitometry Workshop, Pugnochiuso, EU. http://hdl.handle.net/20.500.12708/92752 ( reposiTUm)
Chevalier, Y., Pahr, D. H., & Zysset, P. K. (2008). Anatomy and Morphology-Based Smooth Finite Element Models of Human Vertebral Bodies. 16th Annual Symposium on Computational Methods in Orthopaedic Biomechanics, San Francisco, CA, Non-EU. http://hdl.handle.net/20.500.12708/92520 ( reposiTUm)
Pahr, D. H., & Ucsnik, S. (2008). Investigation of Novel Composite-Metal-Joints. 11th Euro-Japanese Symposium on Multi-Materials Solutions for Industrial Applications, Porto, EU. http://hdl.handle.net/20.500.12708/92578 ( reposiTUm)
Pahr, D. H., & Zysset, P. K. (2007). Influence of Boundary Conditions on Simulated Overall Effective Properties of Cancellous Bone. MHM 2007: Modelling of Heterogeneous Materials, Prag, EU. http://hdl.handle.net/20.500.12708/92356 ( reposiTUm)
Pahr, D. H., & Zysset, P. K. (2007). Elastic Response of Fabric-Based Femoral and Vertebral Bone Models. 14th Workshop “The Finite Element Method in Biomedical Engineering, Biomechanics and Related Fields,” Ulm, EU. http://hdl.handle.net/20.500.12708/92359 ( reposiTUm)
Chevalier, Y., Charlebois, M., Varga, P., Pahr, D. H., & Zysset, P. K. (2007). A Novel Patient Specific Finite Element Model to Predict Damage Accumulation in Vertebral Bodies under Axial Compression. ASBMR 29th Annual Meeting, Honolulu, HI, Non-EU. http://hdl.handle.net/20.500.12708/92388 ( reposiTUm)
Graeff, C., Glüer, C. C., Borggrefe, J., Charlebois, M., Chevalier, Y., Varga, P., Pahr, D. H., Nickelsen, T. N., Marin, F., Farrerons, J., & Zysset, P. K. (2007). Effects of 2 Years Teriparatide Treatment on Bone Strength Assessed by High Resolution CT Based Finite Element Analysis of Human Vertebrae in vivo: Results form the Eurofors Study. ASBMR 29th Annual Meeting, Honolulu, HI, Non-EU. http://hdl.handle.net/20.500.12708/92385 ( reposiTUm)
Charlebois, M., Chevalier, Y., Varga, P., Pahr, D. H., & Zysset, P. K. (2007). A Combined Axial Compression and Flexion Loading Mode to Evaluate Strength of Vertebral Bodies Using a Voxel-Based Finite Element Method. ASBMR 29th Annual Meeting, Honolulu, HI, Non-EU. http://hdl.handle.net/20.500.12708/92387 ( reposiTUm)
Pahr, D. H. (2006). Vergleich unterschiedlicher Spongiosa/Kortikalis Modellierungen bei humanem Knochen. 2. Wiener Biomaterialsymposium, Wien, Österreich, Austria. http://hdl.handle.net/20.500.12708/92244 ( reposiTUm)
Rammerstorfer, F. G., Daxner, T., Pahr, D. H., & Vonach, W. K. (2006). Hierarchical Modelling of Composite Materials and Material Compounds for Aerospace Applications. Special Lecture at the Department of Aeronautics and Astronautics of the University of Tokyo, Tokyo, Non-EU. http://hdl.handle.net/20.500.12708/92225 ( reposiTUm)
Pahr, D. H. (2006). Hierarchical Modelling of Composite Aircraft Components. Aeronautics Days 2006, Wien, Austria. http://hdl.handle.net/20.500.12708/92175 ( reposiTUm)
Pahr, D. H., & Rammerstorfer, F. G. (2006). Analytical and Computational Models for Investigations of Local Buckling in Honeycomb Sandwiches. THERMEC 2006 - International Conference on Processing and Manufacturing of Advanced Materials, Vancouver, BC, Non-EU. http://hdl.handle.net/20.500.12708/92183 ( reposiTUm)
Pahr, D. H. (2006). Hierarchical Modeling of Bone. Workshop on Mechanics of Heterogeneous Materials, Prag, EU. http://hdl.handle.net/20.500.12708/92221 ( reposiTUm)
Rammerstorfer, F. G., Pahr, D. H., & Daxner, T. (2006). Micro- and Meso-Instabilities in Structured Composite Materials and Material Compounds. 19th International Workshop “Research in Mechanics of Composites,” Bad Herrenalb, EU. http://hdl.handle.net/20.500.12708/92242 ( reposiTUm)
Skrna-Jakl, I. C., Karner, K.-H., Pahr, D. H., & Rammerstorfer, F. G. (2006). Numerical and Experimental Investigations of the Stiffness and Strength Behavior of Corrugated Core Sandwich Panels. 7th World Congress on Computational Mechanics (WCCM-7), Los Angeles, CA, Non-EU. http://hdl.handle.net/20.500.12708/92180 ( reposiTUm)
Chevalier, Y., Pahr, D. H., Heini, P., Schneider, E., & Zysset, P. K. (2006). Biomechanical Analysis of Vertebroplasty Using Anatomy-Based Finite ElementModels. Gemeinsame Jahrestagung der Deutschen, Österreichischen und Schweizerischen Gesellschaft für Biomedizinische Technik 2006, Zürich, Non-EU. http://hdl.handle.net/20.500.12708/92198 ( reposiTUm)
Zysset, P. K., & Pahr, D. H. (2006). Fabric-Based Computational Mechanics of Trabecular Bone. 2nd GAMM Seminar on Continuum Biomechanics, Freudenstadt-Lauterbad, EU. http://hdl.handle.net/20.500.12708/92243 ( reposiTUm)
Chevalier, Y., Varga, P., Pahr, D. H., & Zysset, P. K. (2006). A patient-based finite element approach to estimate vertebral bone strength. International Conference on Progress in Bone and Mineral Research, Wien, Austria. http://hdl.handle.net/20.500.12708/92239 ( reposiTUm)
Graeff, C., Glüer, C. C., Chevalier, Y., Varga, P., Pahr, D. H., Nickelsen, T. N., Marin, F., & Zysset, P. K. (2006). Increases in Stiffness After Two Years of Teriparatide Treatment Assessed by High Resolution CT Based Finite Element Analysis of Human Vertebrae in Vivo. 28th Annual Meeting of the American Society of Bone and Mineral Research, Philadelphia, PA, Non-EU. http://hdl.handle.net/20.500.12708/92200 ( reposiTUm)
Chevalier, Y., Varga, P., Pahr, D. H., Schneider, E., & Zysset, P. K. (2006). Calibrated Finite Element Voxel Models Based on High-Resolution CT Predict in vitro Vertebral Strength Better than DEXA. 28th Annual Meeting of the American Society of Bone and Mineral Research, Philadelphia, PA, Non-EU. http://hdl.handle.net/20.500.12708/92201 ( reposiTUm)
Chevalier, Y., Allmer, H., Pahr, D. H., Charlebois, M., & Zysset, P. K. (2006). Validation of a Voxel-Based FE Method for Prediction of the Uniaxial Stiffness of Human Trabecular Bone Using Macroscopic Mechanical Tests and Nanoindentation. 5th World Congress of Biomechanics, München, EU. http://hdl.handle.net/20.500.12708/92187 ( reposiTUm)
Pahr, D. H., Charlebois, M., Chevalier, Y., Allmer, H., Krach, W., & Zysset, P. K. (2006). A Fast Framework for Modelling the Effective Orthotropic Elastic Properties of Cancellous Bone. 5th World Congress of Biomechanics, München, EU. http://hdl.handle.net/20.500.12708/92184 ( reposiTUm)
Pahr, D. H. (2005). Einführung in die Finite Elemente Methode. Altair Engineering Seminar, Böblingen, Austria. http://hdl.handle.net/20.500.12708/91909 ( reposiTUm)
Pahr, D. H. (2005). Einführung in die Finite Elemente Methode. Altair Engineering Seminar, Böblingen, Austria. http://hdl.handle.net/20.500.12708/92069 ( reposiTUm)
Pahr, D. H., & Zysset, P. K. (2005). Linear and Non-Linear Finite Element Modeling of Trabecular Bone using Voxel and Smooth Surface Unit Cell Models. DGfB biomechanica 2005, Hamburg, EU. http://hdl.handle.net/20.500.12708/92038 ( reposiTUm)
Pahr, D. H., Luxner, M., Kaudela, K., & Zysset, P. K. (2005). Finite-Elemente Studie einer neuartigen dynamischen Hüft-Prothese. jahrestagung 2005 der Österreichischen Gesellschaft für Biomedizinische Technik, Hall, Austria. http://hdl.handle.net/20.500.12708/92082 ( reposiTUm)
Rammerstorfer, F. G., Pahr, D. H., Daxner, T., & Friedl, N. (2004). Buckling in Thin Walled Macro and Meso Structures of Lightweight Materials and Material Compounds. WCCM VI, Beijing, Austria. http://hdl.handle.net/20.500.12708/91880 ( reposiTUm)
Pahr, D. H. (2004). Grundlagen der Berechnung und Möglichkeiten der Optimierung von Faserverbundstrukturen. Altair Engineering Seminar, Böblingen, Austria. http://hdl.handle.net/20.500.12708/91890 ( reposiTUm)
Pettermann, H. E., Schuecker, C., Pahr, D. H., & Rammerstorfer, F. G. (2004). Modeling and Simulation of Aircraft Structures - Stiffness, Damage, and Failure Prediction for Laminated Composites. 4th FENet Annual Industry Meeting, Lissabon, Austria. http://hdl.handle.net/20.500.12708/91906 ( reposiTUm)
Pahr, D. H. (2004). Grundlagen der Berechnung und Möglichkeiten der Optimierung von Faserverbundstrukturen. Altair Engineering Seminar, Böblingen, Austria. http://hdl.handle.net/20.500.12708/91877 ( reposiTUm)
Schuecker, C., Pahr, D. H., & Pettermann, H. E. (2004). Numerical Simulation of Composite Structures - First Ply Failure under Non-Proportional Loading. 6th International Conference for Mesomechanics, Patras, Austria. http://hdl.handle.net/20.500.12708/91856 ( reposiTUm)
Pahr, D. H., Marte, C., Rammerstorfer, F. G., & Böhm, H. J. (2004). Hierarchical Modelling of Perforated Woven Fabric Laminates. ECCOMAS 2004 (4th European Congress on Computational Methods in Applied Sciences and Engineering), Jyväskylä, Austria. http://hdl.handle.net/20.500.12708/91879 ( reposiTUm)
Pahr, D. H., & Rammerstorfer, F. G. (2003). Experimentelle und numerische Untersuchungen von perforierten Laminaten. 14. DGM Symposium Verbundwerkstoffe und Werkstoffverbunde, Wien, Austria. http://hdl.handle.net/20.500.12708/91628 ( reposiTUm)
Pettermann, H. E., Schuecker, C., & Pahr, D. H. (2003). Simulation und Modellierung mechanischer Eigenschaften von Laminaten. Wissenschaftliches Evaluierungsseminar des Austrian Aeronautics Research Network, Wien, Austria. http://hdl.handle.net/20.500.12708/91666 ( reposiTUm)
Schuecker, C., Pahr, D. H., & Pettermann, H. E. (2003). Numerical Simulation of Failure in Layered Fiber Reinforced Composites in the Presence of Residual Stresses. 5th Euromech Solid Mechanics Conference ESMC-5, Thessaloniki, Austria. http://hdl.handle.net/20.500.12708/91635 ( reposiTUm)
Pahr, D. H. (2003). Gelochte Laminate im Flugzeugbau. Forum für Metallurgie und Werkstofftechnik 2003, Leoben, Austria. http://hdl.handle.net/20.500.12708/91619 ( reposiTUm)
Pahr, D. H., Hampel, S., & Rammerstorfer, F. G. (2003). Extensions and Implementation of Puck’s Uni-Directional Layered Laminate Damge Model in a Finite-Element Program. GAMM Jahreskonferenz 2003, Abano Terme, Italy, Austria. http://hdl.handle.net/20.500.12708/91604 ( reposiTUm)
Pahr, D. H., & Rammerstorfer, F. G. (2002). Multi-Scale Analyses of Perforated Laminates (H. A. Mang, F. G. Rammerstorfer, & J. Eberhardsteiner, Eds.). http://hdl.handle.net/20.500.12708/91446 ( reposiTUm)
Pahr, D. H., & Rammerstorfer, F. G. (2002). Meso-Macro Analyses of Perforated Laminates. International Conference on New Challenges in Mesomechanics, Aalborg, Denmark, Austria. http://hdl.handle.net/20.500.12708/91447 ( reposiTUm)

Berichte

Pahr, D. H. (2004). Linear and Non-linear Homogenization using FEM. http://hdl.handle.net/20.500.12708/34593 ( reposiTUm)
Pahr, D. H., & Rammerstorfer, F. G. (2002). Numerische Auswertung des Steifigkeits- und Festigkeitsverhaltens gelochter Faserverbundlaminate. http://hdl.handle.net/20.500.12708/34405 ( reposiTUm)
Pahr, D. H. (2002). Numerische Auswertung des Steifigkeits- und Festigkeitsverhaltens gelochtert Faserverbundlaminate. http://hdl.handle.net/20.500.12708/34353 ( reposiTUm)
Pahr, D. H., & Arnold, S. M. (2001). The Applicability of the Generalized Method of Cells for Analyzing Discontinuously Reinforced Composites, NASA/TM-2001-211165. http://hdl.handle.net/20.500.12708/34667 ( reposiTUm)

Hochschulschriften

Pahr, D. H. (2008). Computational multi-scale modelling of synthetic and natural composites [Professorial Dissertation, Technische Universität Wien]. reposiTUm. http://hdl.handle.net/20.500.12708/179752 ( reposiTUm)