Wissenschaftliche Artikel

Kuloglija, S., Asasian Kolur, N., Kalman, V., Jordan, C., Golda, M., Makaruk, A., Engin, E., Balla, A., & Harasek, M. (2025). Hydrogen purification from underground storage via pressurized adsorption: Impact of adsorbent properties and operating parameters on methane separation. International Journal of Hydrogen Energy, 136, 402–412. https://doi.org/10.1016/j.ijhydene.2025.05.090 ( reposiTUm)

Piotrowska, J. A., Jordan, C., Stagel, K., Annerl, M., Willner, J., Limbeck, A., Harasek, M., & Bica-Schröder, K. (2025). Acid-functionalized PVA composite membranes for pervaporation-assisted esterification. REACTION CHEMISTRY & ENGINEERING. https://doi.org/10.1039/D4RE00388H ( reposiTUm)

Asasian Kolur, N., Sharifian, S., Jordan, C., Aghaei Dinani, R., Wellscheid, B. J., Föttinger, K., & Harasek, M. (2025). Streamlined physical activation of Pistacia terebinthus shells: carbonization and activation kinetic studies. BIOMASS & BIOENERGY, 200, Article 108010. https://doi.org/10.1016/j.biombioe.2025.108010 ( reposiTUm)

Piotrowska, J. A., Jordan, C., Harasek, M., & Bica-Schröder, K. (2024). Development of Hollow Fiber Membranes Functionalized with Ionic Liquids for Enhanced CO₂ Separation. ACS Sustainable Chemistry & Engineering, 12(32), 12236–12248. https://doi.org/10.1021/acssuschemeng.4c04597 ( reposiTUm)

Aziaba, K., Annerl, M., Greilinger, G., Teufner-Kabas, M., Kabas, F., Jordan, C., & Harasek, M. (2024). Dehydration by Pervaporation of an Organic Solution for the Direct Synthesis of Diethyl Carbonate. Separations, 11(10), Article 289. https://doi.org/10.3390/separations11100289 ( reposiTUm)

Ruzova, T., Haddadi Sisakht, B., Jonach, T., Jordan, C., & Harasek, M. (2023). Development of a computer vision-based measuring system for investigating the porous media structure. Materials Characterization, 203, Article 113087. https://doi.org/10.1016/j.matchar.2023.113087 ( reposiTUm)

Ramonet Marques, F., Kovacevic, M., Haddadi Sisakht, B., Jordan, C., & Harasek, M. (2023). Bioreactor mixing: a comparison of computational fluid dynamics and experimental approaches in the pursuit of sustainable bioprocessing for the bioeconomy. Chemical Engineering Transactions, 105(1), 265–270. https://doi.org/10.3303/CET23105045 ( reposiTUm)

Aziaba, K., Mozina, F. M., Teufner-Kabas, M., Kabas, F., Jordan, C., & Harasek, M. (2023). Stability of Diethyl Carbonate in the Presence of Acidic and Basic Solvents. Chemical Engineering Transactions, 105, 163–168. https://doi.org/10.3303/cet23105028 ( reposiTUm)

Imran, F., Lück, R., Jordan, C., Herwig, C., & Harasek, M. (2023). A Perspective on the Role of Digitalization Enablers in Sustainable Pharmaceutical Manufacturing. Chemical Engineering Transactions, 105, 361–366. https://doi.org/10.3303/CET23105061 ( reposiTUm)

Sharifian, S., Asasian Kolur, N., Najafi, H., Haddadi Sisakht, B., Jordan, C., & Harasek, M. (2023). Reusable granulated silica pillared clay for wastewater treatment, selective for adsorption of Ni(II). Cleaner Engineering and Technology, 14, Article 100634. https://doi.org/10.1016/j.clet.2023.100634 ( reposiTUm)

Asasian Kolur, N., Sharifian, S., Haddadi Sisakht, B., Jordan, C., & Harasek, M. (2023). Ordered porous carbon preparation by hard templating approach for hydrogen adsorption application. Biomass Conversion and Biorefinery. https://doi.org/10.1007/s13399-023-04282-x ( reposiTUm)

Jonach, T., Haddadi Sisakht, B., Jordan, C., & Harasek, M. (2023). Dynamic Simulation of a Gas and Oil Separation Plant with Focus on the Water Output Quality. Energies, 16(10), Article 4111. https://doi.org/10.3390/en16104111 ( reposiTUm)

Zarrabi, M., Pourhoseinian, M., Sharifian, S., Asasian Kolur, N., Haddadi, B., Jordan, C., & Harasek, M. (2022). Numerical Analysis of an Air Humidification System Using Computational Fluid Dynamics. Chemical Engineering Transactions, 94, 1231–1236. https://doi.org/10.3303/CET2294205 ( reposiTUm)

Jonach, T., Jordan, C., Haddadi, B., & Harasek, M. (2022). Modelling and Simulation of 3-Phase Separators in the Oil and Gas Industry with Emphasis on Water Quality. Chemical Engineering Transactions, 94, 1009–1014. https://doi.org/10.3303/CET2294168 ( reposiTUm)

Ramonet Marques, F., Jordan, C., Haddadi Sisakht, B., & Harasek, M. (2022). Anaerobic Digestion as a Carbon Capture, Storage, and Utilization Technology. Chemical Engineering Transactions, 96, 49–54. https://doi.org/10.3303/CET2296009 ( reposiTUm)

Ramonet Marques, F., Haddadi Sisakht, B., Jordan, C., & Harasek, M. (2022). Modelling and Design of Optimal Internal Loop Air-Lift Reactor Configurations Through Computational Fluid Dynamics. Chemical Engineering Transactions, 94(1), 817–822. https://doi.org/10.3303/CET2294136 ( reposiTUm)

Aziaba, K., Weiß, B. D., Illyés, V., Jordan, C., Haider, M., & Harasek, M. (2022). High Purity Hydrogen from Liquid NH3 – Proposal and Evaluation of a Process Chain. Chemical Engineering Transactions, 96, 169–174. https://doi.org/10.3303/CET2296029 ( reposiTUm)

Wesenauer, F., Pichler, M., Jordan, C., Harasek, M., & Winter, F. (2022). Numerical and experimental study of heterogeneous reactions involving carbonaceous compounds in clay brick firing. Construction and Building Materials, 327, Article 126744. https://doi.org/10.1016/j.conbuildmat.2022.126744 ( reposiTUm)

Najafi, H., Asasian-Kolur, N., Sharifian, S., Haddadi, B., Jordan, C., & Harasek, M. (2022). Calcium Alginate Encapsulated Pillared Clay Beads for Adsorption of Ni(Ii) from Aqueous Solution. Chemical Engineering Transactions, 94, 1213–1218. https://doi.org/10.3303/CET2294202 ( reposiTUm)

Serna-Loaiza, S., Kornpointner, C., Pazzaglia, A., Jordan, C., Halbwirth, H., & Friedl, A. (2022). Biorefinery concept for the valorization of grapevine shoots: Study case for the Austrian variety Grüner Veltliner. Food and Bioproducts Processing, 136, 154–165. https://doi.org/10.1016/j.fbp.2022.10.001 ( reposiTUm)

Kalman, V., Voigt, J., Jordan, C., & Harasek, M. (2022). Hydrogen Purification by Pressure Swing Adsorption: High-Pressure PSA Performance in Recovery from Seasonal Storage. Sustainability, 14(21), Article 14037. https://doi.org/10.3390/su142114037 ( reposiTUm)

Cabrera Gonzalez, M. M. V., Ahmed, A. E. G., Maamo, K., Salem, M., Jordan, C., & Harasek, M. (2022). Evaluation of Nanofiltration Membranes for Pure Lactic Acid Permeability. Membranes, 12(3), Article 302. https://doi.org/10.3390/membranes12030302 ( reposiTUm)

Aziaba, K., Jordan, C., Haddadi, B., & Harasek, M. (2022). Design of a Gas Permeation and Pervaporation Membrane Model for an Open Source Process Simulation Tool. Membranes, 12(12), Article 1186. https://doi.org/10.3390/membranes12121186 ( reposiTUm)

Mahdavy, S., Norouzi, H. R., Jordan, C., Haddadi, B., & Harasek, M. (2022). Residence Time Distribution of Non-Spherical Particles in a Continuous Rotary Drum. Processes, 10(6), Article 1069. https://doi.org/10.3390/pr10061069 ( reposiTUm)

Mosavi Mirak, S. H., Sharifian, S., Esmaeili Khalil Saraei, F., Asasian Kolur, N., Haddadi, B., Jordan, C., & Harasek, M. (2022). Titanium-Pillared Clay: Preparation Optimization, Characterization, and Artificial Neural Network Modeling. Materials, 15(13), Article 4502. https://doi.org/10.3390/ma15134502 ( reposiTUm)

Pichler, M., Haddadi, B., Jordan, C., Norouzi, H., & Harasek, M. (2021). Effect of particle contact point treatment on the CFD simulation of the heat transfer in packed beds. Chemical Engineering Research and Design, 165, 242–253. https://doi.org/10.1016/j.cherd.2020.11.005 ( reposiTUm)

Pichler, M., Wesenauer, F., Jordan, C., Puskas, S., Streibl, B., Winter, F., & Harasek, M. (2021). Design and simulation of gas burner ejectors. Carbon Resources Conversion, 4, 28–35. https://doi.org/10.1016/j.crcon.2021.01.006 ( reposiTUm)

Pichler, M., Haddadi, B., Jordan, C., Norouzi, H., & Harasek, M. (2021). Influence of particle residence time distribution on the biomass pyrolysis in a rotary kiln. Journal of Analytical and Applied Pyrolysis, 158(105171), 105171. https://doi.org/10.1016/j.jaap.2021.105171 ( reposiTUm)

Pichler, M., Haddadi, B., Jordan, C., & Harasek, M. (2021). Modeling the effective thermal conductivity of hollow bricks at high temperatures. Construction and Building Materials, 309(125066), 125066. https://doi.org/10.1016/j.conbuildmat.2021.125066 ( reposiTUm)

Lukitsch, B., Koller, R., Ecker, P., Elenkov, M., Janeczek, C., Pekovits, M., Haddadi, B., Jordan, C., Gfoehler, M., & Harasek, M. (2021). Water as a Blood Model for Determination of CO₂ Removal Performance of Membrane Oxygenators. Membranes, 11(5), 356. https://doi.org/10.3390/membranes11050356 ( reposiTUm)

Wesenauer, F., Jordan, C., Azam, M., Harasek, M., & Winter, F. (2021). Considerations on Temperature Dependent Effective Diffusion and Permeability of Natural Clays. Materials, 14(17), 4942. https://doi.org/10.3390/ma14174942 ( reposiTUm)

Wesenauer, F., Jordan, C., Pichler, M., Frei, A., Azam, M., Setoodeh Jahromy, S., Harasek, M., & Winter, F. (2021). Correction to An Unreacted Shrinking Core Model Serves for Predicting Combustion Rates of Organic Additives in Clay Bricks. Energy and Fuels, 35(5), 4616–4616. https://doi.org/10.1021/acs.energyfuels.1c00307 ( reposiTUm)

Pichler, M., Haddadi, B., Jordan, C., Norouzi, H., & Harasek, M. (2021). Dataset for the simulated biomass pyrolysis in rotary kilns with varying particle residence time distributions. Data in Brief, 39(107603), 107603. https://doi.org/10.1016/j.dib.2021.107603 ( reposiTUm)

Eilenberger, C., Rothbauer, M., Selinger, F., Gerhartl, A., Jordan, C., Harasek, M., Schädl, B., Grillari, J., Weghuber, J., Neuhaus, W., Küpcü, S., & Ertl, P. (2021). A Microfluidic Multisize Spheroid Array for Multiparametric Screening of Anticancer Drugs and Blood-Brain Barrier Transport Properties. Advanced Science, 8(11), 2004856. https://doi.org/10.1002/advs.202004856 ( reposiTUm)

Ecker, P., Pekovits, M., Yorov, T., Haddadi, B., Lukitsch, B., Elenkov, M., Janeczek, C., Jordan, C., Gfoehler, M., & Harasek, M. (2021). Microstructured Hollow Fiber Membranes: Potential Fiber Shapes for Extracorporeal Membrane Oxygenators. Membranes, 11(5), 374. https://doi.org/10.3390/membranes11050374 ( reposiTUm)

Lukitsch, B., Ecker, P., Elenkov, M., Janeczek, C., Jordan, C., Krenn, C. G., Ullrich, R., Gfoehler, M., & Harasek, M. (2021). Suitable CO₂ Solubility Models for Determination of the CO₂ Removal Performance of Oxygenators. Bioengineering, 8(3), 33. https://doi.org/10.3390/bioengineering8030033 ( reposiTUm)

Setoodeh Jahromy, S., Azam, M., Jordan, C., Harasek, M., & Winter, F. (2021). The Potential Use of Fly Ash from the Pulp and Paper Industry as Thermochemical Energy and CO2 Storage Material. Energies, 14(11), 1–21. https://doi.org/10.3390/en14113348 ( reposiTUm)

Azam, M., Ashraf, A., Setoodeh Jahromy, S., Miran, S., Raza, N., Wesenauer, F., Jordan, C., Harasek, M., & Winter, F. (2021). Co-Combustion Studies of Low-Rank Coal and Refuse-Derived Fuel: Performance and Reaction Kinetics. Energies, 14(13), 1–13. https://doi.org/10.3390/en14133796 ( reposiTUm)

Müller, D., Knoll, C., Gravogl, G., Jordan, C., Eitenberger, E., Friedbacher, G., Artner, W., Welch, J. M., Werner, A., Harasek, M., Miletich, R., & Weinberger, P. (2021). Medium-temperature thermochemical energy storage with transition metal ammoniates – A systematic material comparison. Applied Energy, 285, 1–11. https://doi.org/10.1016/j.apenergy.2021.116470 ( reposiTUm)

Lukitsch, B., Ecker, P., Elenkov, M., Janeczek, C., Jordan, C., Krenn, C. G., Ullrich, R., Gföhler, M., & Harasek, M. (2021). Suitable CO2 Solubility Models for Determination of the CO2 Removal Performance of Oxygenators. Bioengineering, 8(3), 1–25. https://doi.org/10.3390/bioengineering8030033 ( reposiTUm)

Bösenhofer, M., Wartha, E.-M., Jordan, C., Hauzenberger, F., Feilmayr, C., Stocker, H., Rieger, J., König, B., & Harasek, M. (2020). Pulverized Coal Conversion in Blast Furnaces - Analysis of Involved Scales. Iron & Steel Technology, 1, 277–285. http://hdl.handle.net/20.500.12708/140915 ( reposiTUm)

Huber, C., Jahromy, S. S., Birkelbach, F., Weber, J., Jordan, C., Schreiner, M., Harasek, M., & Winter, F. (2020). The multistep decomposition of boric acid. Energy Science and Engineering, 8(5), 1650–1666. https://doi.org/10.1002/ese3.622 ( reposiTUm)

Bösenhofer, M., Wartha, E.-M., Jordan, C., Feilmayr, C., Stocker, H., Hauzenberger, F., Rieger, J., Tjaden, S., Walk, A., & Harasek, M. (2020). Suitability of pulverised coal testing facilities for blast furnace applications. Ironmaking & Steelmaking, 47(5), 574–585. https://doi.org/10.1080/03019233.2019.1565152 ( reposiTUm)

Huber, C., Setoodeh Jahromy, S., Birkelbach, F., Weber, J., Jordan, C., Schreiner, M., Harasek, M., & Winter, F. (2020). The multistep decomposition of boric acid. Energy Science and Engineering, 8(5), 1650–1666. https://doi.org/10.1002/ese3.622 ( reposiTUm)

Lukitsch, B., Ecker, P., Elenkov, M., Janeczek, C., Haddadi Sisakht, B., Jordan, C., Krenn, C., Ullrich, R., Gföhler, M., & Harasek, M. (2020). Computation of Global and Local Mass Transfer in Hollow Fiber Membrane Modules. Sustainability, 12(6), 1–20. https://doi.org/10.3390/su12062207 ( reposiTUm)

Setoodeh Jahromy, S., Jordan, C., Azam, M., Werner, A., Harasek, M., & Winter, F. (2019). Fly Ash from Municipal Solid Waste Incineration as a Potential Thermochemical Energy Storage Material. Energy and Fuels, 33(7), 5810–5819. https://doi.org/10.1021/acs.energyfuels.8b04106 ( reposiTUm)

Rosser, J., Bachmann, B. E.-M., Jordan, C., Ribitsch, I., Haltmayer, E., Gueltekin, S., Junttila, S., Galik, B., Gyenesei, A., Haddadi Sisakht, B., Harasek, M., Egerbacher, M., Ertl, P., & Jenner, F. (2019). Microfluidic Nutrient Gradient-based 3D Chondrocyte Culture-on-a-Chip as in vitro Equine Arthritis Model. Materials Today Bio, 4(100023), 100023. https://doi.org/10.1016/j.mtbio.2019.100023 ( reposiTUm)

Setoodeh Jahromy, S., Azam, M., Huber, F., Jordan, C., Wesenauer, F., Huber, C., Naghdi, S., Schwendtner, K., Neuwirth, E., Laminger, T., Eder, D., Werner, A., Harasek, M., & Winter, F. (2019). Comparing Fly Ash Samples from Different Types of Incinerators for Their Potential as Storage Materials for Thermochemical Energy and CO₂. Materials, 12(20), 3358. https://doi.org/10.3390/ma12203358 ( reposiTUm)

Harasek, M., Lukitsch, B., Ecker, P., Janeczek, C., Elenkov, M., Keck, T., Haddadi, B., Jordan, C., Neudl, S., Krenn, C.-G., Ullrich, R., & Gföhler, M. (2019). Fully Resolved Computational (CFD) and Experimental Analysis of Pressure Drop and Blood Gas Transport in a Hollow Fibre Membrane Oxygenator Module. Chemical Engineering Transactions, 76, 193–198. https://doi.org/10.3303/CET1976033 ( reposiTUm)

Setoodeh Jahromy, S., Birkelbach, F., Jordan, C., Huber, C., Harasek, M., Werner, A., & Winter, F. (2019). Impact of Partial Pressure, Conversion, and Temperature on the Oxidation Reaction Kinetics of Cu2O to CuO in Thermochemical Energy Storage. Energies, 12(3), 1–15. https://doi.org/10.3390/en12030508 ( reposiTUm)

Azam, M., Setoodeh Jahromy, S., Raza, W., Jordan, C., Harasek, M., & Winter, F. (2019). Comparison of the combustion characteristics and kinetic study of coal, municipal solid waste, and refuse‐derived fuel: Model‐fitting methods. Energy Science and Engineering, 7(6), 2646–2657. https://doi.org/10.1002/ese3.450 ( reposiTUm)

Huber, C., Setoodeh Jahromy, S., Jordan, C., Schreiner, M., Harasek, M., Werner, A., & Winter, F. (2019). Boric Acid: A High Potential Candidate for Thermochemical Energy Storage. Energies, 12(6), 1–16. https://doi.org/10.3390/en12061086 ( reposiTUm)

Haddadi, B., Gasser, C., Jordan, C., Harasek, M., & Lendl, B. (2018). Simultaneous Laser Doppler Velocimetry and stand-off Raman spectroscopy as a novel tool to assess flow characteristics of process streams. Chemical Engineering Journal, 334, 123–133. https://doi.org/10.1016/j.cej.2017.10.027 ( reposiTUm)

Haddadi, B., Jordan, C., Miltner, M., & Harasek, M. (2018). Membrane modeling using CFD: Combined evaluation of mass transfer and geometrical influences in 1D and 3D. Journal of Membrane Science, 563, 199–209. https://doi.org/10.1016/j.memsci.2018.05.040 ( reposiTUm)

Bösenhofer, M., Wartha, E.-M., Jordan, C., & Harasek, M. (2018). The Eddy Dissipation Concept—Analysis of Different Fine Structure Treatments for Classical Combustion. Energies, 11(7), 1–21. https://doi.org/10.3390/en11071902 ( reposiTUm)

Zirath, H., Rothbauer, M., Spitz, S., Bachmann, B., Jordan, C., Müller, B., Ehgartner, J., Priglinger, E., Mühleder, S., Redl, H., Holnthoner, W., Harasek, M., Mayr, T., & Ertl, P. (2018). Every Breath You Take: Non-invasive Real-Time Oxygen Biosensing in Two- and Three-Dimensional Microfluidic Cell Models. Frontiers in Physiology. https://doi.org/10.3389/fphys.2018.00815 ( reposiTUm)

Bachmann, B. E. M., Spitz, S., Rothbauer, M., Jordan, C., Purtscher, M., Zirath, H., Schuller, P., Eilenberger, C., Faheem Ali, S., Mühleder, S., Priglinger, E., Harasek, M., Redl, H., Holnthoner, W., & Ertl, P. (2018). Engineering of three-dimensional pre-vascular networks within fibrin hydrogel constructs by microfluidic control over reciprocal cell signaling. Biomicrofluidics. https://doi.org/10.1063/1.5027054 ( reposiTUm)

Harsfalvi, Z., Jordan, C., Haddadi, B., & Harasek, M. (2017). Computational Fluid Dynamic Analysis of Cooling in a Mixed Vessel using a Non-Newtonian Medium. Chemical Engineering Transactions, 61, 565–570. https://doi.org/10.3303/CET1761092 ( reposiTUm)

Haddadi, B., Jordan, C., & Harasek, M. (2017). Cost efficient CFD simulations: Proper selection of domain partitioning strategies. Computer Physics Communications, 219, 121–134. https://doi.org/10.1016/j.cpc.2017.05.014 ( reposiTUm)

Harasek, M., Haddadi Sisakht, B., Jordan, C., Gföhler, M., Janeczek, C., Karabegovic, A., Futter, L. M., Krenn, C.-G., Neudl, S., & Ullrich, R. (2017). Intracorporeal Membrane Catheter for CO₂ Reduction in a Blood-Membrane Contactor. International Journal of Artificial Organs, 40(8), 382–428. https://doi.org/10.5301/ijao.5000629 ( reposiTUm)

Deutsch, M., Müller, D., Aumeyr, C., Jordan, C., Gierl-Mayer, C., Weinberger, P., Winter, F., & Werner, A. (2016). Systematic search algorithm for potential thermochemical energy storage systems. Applied Energy, 183, 113–120. https://doi.org/10.1016/j.apenergy.2016.08.142 ( reposiTUm)

Haddadi, B., Jordan, C., Norouzi, H. R., & Harasek, M. (2016). Investigation of the Pressure Drop of Random Packed Bed Adsorbers. Chemical Engineering Transactions, 52, 439–444. https://doi.org/10.3303/CET1652074 ( reposiTUm)

Jordan, C., & Harasek, M. (2016). Optimierung eines biomassebefeuerten Stirling-Motors. Chemie Ingenieur Technik - CIT, 88(9), 1387–1388. http://hdl.handle.net/20.500.12708/149440 ( reposiTUm)

Harasek, M., Haddadi, B., Miltner, M., Schretter, P., & Jordan, C. (2016). Fully Resolved CFD Simulation of a Hollow Fibre Membrane Module. Chemical Engineering Transactions, 52, 433–438. https://doi.org/10.3303/CET1652073 ( reposiTUm)

Haddadi Sisakht, B., Jordan, C., Schretter, P., Lassmann, T., & Harasek, M. (2016). Designing Better Membrane Modules Using CFD. Chemical Product and Process Modeling, 11(1), 57–66. https://doi.org/10.1515/cppm-2015-0066 ( reposiTUm)

Haddadi, B., Jordan, C., & Harasek, M. (2015). Numerische Simulation des Konzentrations‐ und Strömungsprofiles in einem Festbettadsorber. Chemie Ingenieur Technik - CIT, 87(8), 1040. http://hdl.handle.net/20.500.12708/151327 ( reposiTUm)

Jordan, C., & Harasek, M. (2015). Optimale Lamellenfläche eines Radialwärmetauschers für einen biomassebefeuerten Stirling‐Motor. CHEMIE INGENIEUR TECHNIK, 87(8), 1044. http://hdl.handle.net/20.500.12708/151328 ( reposiTUm)

Miltner, M., Jordan, C., & Harasek, M. (2015). CFD simulation of straight and slightly swirling turbulent free jets using different RANS-turbulence models. Applied Thermal Engineering, 89, 1117–1126. https://doi.org/10.1016/j.applthermaleng.2015.05.048 ( reposiTUm)

Jordan, C., Maier, C., Harsfalvi, Z., Kiss, B., & Harasek, M. (2014). Optical and Numerical Analysis of Droplet Breakup. Chemical Engineering Transactions, 39, 1735–1740. https://doi.org/10.3303/CET1439290 ( reposiTUm)

Miltner, M., Jordan, C., & Harasek, M. (2014). On the Applicability of RANS-Turbulence Models in CFD Simulations for the Description of Turbulent Free Jets During Biomass Combustion. Chemical Engineering Transactions, 39, 913–918. https://doi.org/10.3303/CET1439153 ( reposiTUm)

Jordan, C., Fellner, T., & Aumeyr, C. (2014). Systematische Materialforschung für thermochemische Energiespeicher- SolidHeat Basic. CHEMIE INGENIEUR TECHNIK, 86(9), 1428. http://hdl.handle.net/20.500.12708/157126 ( reposiTUm)

Maier, C., Jordan, C., Harasek, M., Feilmayr, C., & Thaler, C. (2013). Investigation of Alternative Reducing Agent Injection into the Raceway of Blast Furnaces using CFD. Chemical Engineering Transactions, 35, 1345–1350. https://doi.org/10.3303/CET1335224 ( reposiTUm)

Maier, C., Jordan, C., Knepper, M., Babich, A., Senk, D., Feilmayr, C., Thaler, C., & Harasek, M. (2013). Numerical and Experimental Study of Alternative Reductant Injection into the Raceway of the Blast Furnace. BHM Berg- Und Hüttenmännische Monatshefte, 158(11), 453–454. https://doi.org/10.1007/s00501-013-0191-3 ( reposiTUm)

Nagy, J., Horvath, A., Jordan, C., & Harasek, M. (2012). Turbulent Phenomena in the Aerobreakup of Liquid Droplets. CFD Letters, 4(3), 112–126. http://hdl.handle.net/20.500.12708/162183 ( reposiTUm)

Maier, C., Jordan, C., Harasek, M., Feilmayr, C., & Thaler, C. (2012). Implementation and Validation of a Three-Dimensional Multiphase-CFD-Model for Blast Furnace Processes. Chemical Engineering Transactions, 29, 925–930. https://doi.org/10.3303/CET1229155 ( reposiTUm)

Jordan, C., Harasek, M., Zauner, F., Kirchbacher, F., Feilmayr, C., & Schuster, S. (2010). CFD Analysis of Injection of Heavy Fuel Oil and Plastic Particles into a Blast Furnace Raceway - Estimation of Droplet Size Distribution. Chemical Engineering Transactions, 21, 1087–1092. https://doi.org/10.3303/CET1021182 ( reposiTUm)

Jordan, C., & Harasek, M. (2010). Improvement of a Combustion Unit Based on a Grate Furnace for Granular Dry Solid Biofuels Using CFD Methods. Heat Transfer Engineering, 31(9), 774–781. https://doi.org/10.1080/01457630903501062 ( reposiTUm)

Horvath, A., Jordan, C., Lukasser, M., Kuttner, C., Makaruk, A., & Harasek, M. (2009). CFD Simulation of Bubble Columns using the VOF Model : Comparison of commercial and Open Source Solvers with an Experiment. Chemical Engineering Transactions, 18, 605–610. https://doi.org/10.3303/CET0918098 ( reposiTUm)

Horvath, A., Jordan, C., & Harasek, M. (2008). Influence of Vortex-Finder Diameter on Axial Gas Flow in Simple Cyclone. Chemical Product and Process Modeling, 3(1), 26. http://hdl.handle.net/20.500.12708/169561 ( reposiTUm)

Horvath, A., Jordan, C., Forstner, G., Altacher, P., & Harasek, M. (2007). CFD methods for the reduction of reactive gas emission from a paper laminating machine. Journal of Hazardous Materials, 144, 687–691. http://hdl.handle.net/20.500.12708/169332 ( reposiTUm)

Abermann, S., Jordan, C., Harasek, M., & Bertagnolli, E. (2006). Processing and simulation of few nm thick high-k dielectric films. Microelectronic Engineering, 83, 1571–1572. http://hdl.handle.net/20.500.12708/171625 ( reposiTUm)

Beiträge in Tagungsbänden

Janeczek, C., Lukitsch, B., Ecker, P., Elenkov, M., Haddadi, B., Jordan, C., Aloy, A., Harasek, M., & Gföhler, M. (2021). O2-Enrichment Device Based on Membrane Separation for Early Phases of Respiratory Insufficiency. In Proceedings ISB 2021 (p. 171). http://hdl.handle.net/20.500.12708/68254 ( reposiTUm)

Wesenauer, F., Frei, A., Jordan, C., Pichler, M., Harasek, M., & Winter, F. (2021). A three-stage reaction model for the conversion of organic and inorganic carbon in clay brick firing. In Proceedings Volume (pp. 68–73). http://hdl.handle.net/20.500.12708/50827 ( reposiTUm)

Lukitsch, B., Ecker, P., Elenkov, M., Janeczek, C., Haddadi, B., Jordan, C., Krenn, C. G., Ullrich, R., Gföhler, M., & Harasek, M. (2020). Predicting The Total Gas Exchange Of Hollow Fiber Membrane Oxygenators: An Upscaling Method Utilizing Computational Fluid Dynamics (cfd). In Abstracts submitted to ESAO Annual Congress 2020, postponed due to COVID-19 pandemic (p. 529). SAGE. http://hdl.handle.net/20.500.12708/68193 ( reposiTUm)

Bösenhofer, M., & Harasek, M. (2020). Non-Isothermal Effectiveness Factors in Coal Combustion. In C. Jordan (Ed.), Proceedings of the 16. Minisymposium Verfahrenstechnik & 7. Partikelforum (p. 5). http://hdl.handle.net/20.500.12708/49599 ( reposiTUm)

Köck, B., Friedl, A., & Mihalyi, B. (2020). Integrating LCA in process development. In C. Jordan (Ed.), Proceedings of the 16. Minisymposium Verfahrenstechnik & 7. Partikelforum (p. 4). http://hdl.handle.net/20.500.12708/49626 ( reposiTUm)

Köck, B.-M., Friedl, A., & Mihalyi, B. (2020). Integrating LCA in process development. In C. Jordan (Ed.), Proceedings of the 16th Minisymposium Verfahrenstechnik and 7th Partikelforum (TU Wien, Sept. 21/22, 2020) (pp. MoP3-(03) page 1-MoP3-(03) page 4). chemical-engineering.at. https://doi.org/10.34726/564 ( reposiTUm)

Büchele, M., Lutz, H., Knaus, F., & Reichhold, A. (2020). Catalyst Testing in a Continuously Operated Fluid Catalytic Cracking Pilot Plant. In C. Jordan (Ed.), Proceedings of the 16th Minisymposium Verfahrenstechnik and 7th Partikelforum (TU Wien, Sept. 21/22, 2020) (pp. MoP3-(10) page 1-MoP3-(10) page 5). chemical-engineering.at. https://doi.org/10.34726/561 ( reposiTUm)

Stolar, A. (2020). Risky language – or a common language for risk communication and process safety? In C. Jordan (Ed.), Proceedings of the 16th Minisymposium Verfahrenstechnik and 7th Partikelforum (TU Wien, Sept. 21/22, 2020) (pp. DiP3-(01) page 1-DiP3-(01) page 4). chemical-engineering.at. https://doi.org/10.34726/565 ( reposiTUm)

Jordan, C. (2020). Introduction and Foreword, Proceedings of the 16th Minisymposium Verfahrenstechnik and 7th Partikelforum (TU Wien, Sept. 21/22, 2020). In C. Jordan (Ed.), Proceedings of the 16th Minisymposium Verfahrenstechnik and 7th Partikelforum (TU Wien, Sept. 21/22, 2020) (pp. 1–6). chemical-engineering.at. https://doi.org/10.34726/582 ( reposiTUm)

Bösenhofer, M., & Harasek, M. (2020). Non-Isothermal Effectiveness Factors in Coal Combustion. In C. Jordan (Ed.), Proceedings of the 16th Minisymposium Verfahrenstechnik and 7th Partikelforum (TU Wien, Sept. 21/22, 2020) (pp. MoV2-(01) page 1-MoV2-(01) page 5). chemical-engineering.at. https://doi.org/10.34726/543 ( reposiTUm)

Bartik, A., Fuchs, J., Müller, S., & Hofbauer, H. (2020). Development of an internally circulating fluidized bed for catalytic methanation of syngas. In C. Jordan (Ed.), Proceedings of the 16th Minisymposium Verfahrenstechnik and 7th Partikelforum (TU Wien, Sept. 21/22, 2020) (pp. MoV2-(04) page 1-MoV2-(04) page 9). chemical-engineering.at. https://doi.org/10.34726/566 ( reposiTUm)

Teufner-Kabas, M., & Kabas, F. (2020). kleinkraft. In C. Jordan (Ed.), Proceedings of the 16th Minisymposium Verfahrenstechnik and 7th Partikelforum (TU Wien, Sept. 21/22, 2020) (pp. DiV4-(03) page 1-DiV4-(03) page 1). chemical-engineering.at. https://doi.org/10.34726/583 ( reposiTUm)

Haddadi, B., Jordan, C., Ecker, P., & Harasek, M. (2020). Simultaneous Multiphase Flow Characterization and Component Fingerprinting. In Proceedings (p. 6). http://hdl.handle.net/20.500.12708/50788 ( reposiTUm)

Serna-Loaiza, S., & Friedl, A. (2020). Bioactive compounds as main economic drivers for sustainable biorefineries. In C. Jordan (Ed.), Proceedings of the 16. Minisymposium Verfahrenstechnik & 7. Partikelforum (p. 4). http://hdl.handle.net/20.500.12708/50801 ( reposiTUm)

Adamcyk, J., Pably, P., Beisl, S., & Friedl, A. (2020). Identification of key process parameters in a wheat straw-based organosolv biorefinery producing colloidal lignin particles. In C. Jordan (Ed.), Proceedings of the 16. Minisymposium Verfahrenstechnik & 7. Partikelforum (p. 4). http://hdl.handle.net/20.500.12708/50802 ( reposiTUm)

Lanzerstorfer, C. (2020). Wall friction of fine granular plastic powders. In C. Jordan (Ed.), Proceedings of the 16. Minisymposium Verfahrenstechnik & 7. Partikelforum (p. 4). http://hdl.handle.net/20.500.12708/50804 ( reposiTUm)

Stolar, A. (2020). Risky language - or a common language for risk communication and process safety? In C. Jordan (Ed.), Proceedings of the 16. Minisymposium Verfahrenstechnik & 7. Partikelforum (p. 4). http://hdl.handle.net/20.500.12708/50803 ( reposiTUm)

Sulzgruber, V., Walter, H., Unterlass, M. M., Cavalli, T., & Haider, M. (2020). Production of micro encapsulated phase change material. In C. Jordan (Ed.), Proceedings of the 16th Minisymposium Verfahrenstechnik and 7th Partikelforum (TU Wien, Sept. 21/22, 2020) (pp. MoV5-(04) page 1-MoV5-(04) page 2). chemical-engineering.at. https://doi.org/10.34726/567 ( reposiTUm)

Kiss, M., Bösenhofer, M., Schatzl, M., & Harasek, M. (2020). Region Coupling Algorithms in OpenFoam. In C. Jordan (Ed.), Proceedings of the 16th Minisymposium Verfahrenstechnik and 7th Partikelforum (TU Wien, Sept. 21/22, 2020) (pp. DiV2-(01) page 1-DiV2-(01) page 5). chemical-engineering.at. https://doi.org/10.34726/544 ( reposiTUm)

Pichler, M., Wesenauer, F., Jordan, C., Puskas, S., Streibl, B., Winter, F., & Harasek, M. (2020). Considering Reactions in Design and Simulation of Ejectors. In C. Jordan (Ed.), Proceedings of the 16th Minisymposium Verfahrenstechnik and 7th Partikelforum (TU Wien, Sept. 21/22, 2020) (pp. MoV2-(03) page 1-MoV2-(03) page 5). chemical-engineering.at. https://doi.org/10.34726/562 ( reposiTUm)

Serna-Loaiza, S., & Friedl, A. (2020). Bioactive compounds as main economic drivers for sustainable biorefineries. In C. Jordan (Ed.), Proceedings of the 16th Minisymposium Verfahrenstechnik and 7th Partikelforum (TU Wien, Sept. 21/22, 2020) (pp. MoP3-(01) page 1-MoP3-(01) page 4). chemical-engineering.at. https://doi.org/10.34726/563 ( reposiTUm)

Lampl, D., & Lanzerstorfer, C. (2020). Porosity of iron ore sinter. In C. Jordan (Ed.), Proceedings of the 16. Minisymposium Verfahrenstechnik & 7. Partikelforum (p. 4). http://hdl.handle.net/20.500.12708/49628 ( reposiTUm)

Büchele, M., Lutz, H., Knaus, F., & Reichhold, A. (2020). Catalyst Testing in a Continuously Operated Fluid Catalytic Cracking Pilot Plant. In C. Jordan (Ed.), Proceedings of the 16. Minisymposium Verfahrenstechnik & 7. Partikelforum (p. 5). http://hdl.handle.net/20.500.12708/49627 ( reposiTUm)

Kiss, M., Bösenhofer, M., Schatzl, M., & Harasek, M. (2020). Region Coupling Algorithms in OpenFoam. In C. Jordan (Ed.), Proceedings of the 16. Minisymposium Verfahrenstechnik & 7. Partikelforum (p. 5). http://hdl.handle.net/20.500.12708/49625 ( reposiTUm)

Pichler, M., Wesenauer, F., Jordan, C., Puskas, S., Streibl, B., Winter, F., & Harasek, M. (2020). Considering Reactions in Design and Simulation of Ejectors. In C. Jordan (Ed.), Proceedings of the 16. Minisymposium Verfahrenstechnik & 7. Partikelforum (p. 5). http://hdl.handle.net/20.500.12708/49623 ( reposiTUm)

Bartik, A., Fuchs, J., Müller, S., & Hofbauer, H. (2020). Development of an internally circulating fluidized bed for catalytic methanation of syngas. In C. Jordan (Ed.), Proceedings of the 16. Minisymposium Verfahrenstechnik & 7. Partikelforum (p. 9). http://hdl.handle.net/20.500.12708/49624 ( reposiTUm)

Niel, J., Weiss, B., & Wukovits, W. (2020). Influences of Selective Waste Gas Recirculation on the Sinter Plant Process. In C. Jordan (Ed.), Proceedings of the 16. Minisymposium Verfahrenstechnik & 7. Partikelforum (p. 5). http://hdl.handle.net/20.500.12708/49622 ( reposiTUm)

Steiner, T., Schallhart, V., & Moeltner, L. (2020). Lastpunktverschiebung durch Hybridantriebe zur Light-off Unterstützung von Fahrzeugkatalysatoren. In C. Jordan (Ed.), Proceedings of the 16th Minisymposium Verfahrenstechnik and 7th Partikelforum (TU Wien, Sept. 21/22, 2020) (pp. MoV1-(01) page 1-MoV1-(01) page 4). chemical-engineering.at. https://doi.org/10.34726/568 ( reposiTUm)

Berger, M., Pillei, M., Mehrle, A., Recheis, W., Kral, F., Freysinger, W., & Kraxner, M. (2020). Comparison of nasal breathing LB simulation results with rhinomanometry and acoustic rhinometry measurements. In C. Jordan (Ed.), Proceedings of the 16th Minisymposium Verfahrenstechnik and 7th Partikelforum (TU Wien, Sept. 21/22, 2020) (pp. DiV2-(02) page 1-DiV2-(02) page 4). chemical-engineering.at. https://doi.org/10.34726/586 ( reposiTUm)

Kahl, S., Kofler, T., Pillei, M., & Kraxner, M. (2020). Empirical design parameter study of a bidirectional flow cyclone. In C. Jordan (Ed.), Proceedings of the 16th Minisymposium Verfahrenstechnik and 7th Partikelforum (TU Wien, Sept. 21/22, 2020) (pp. DiV5-(01) page 1-DiV5-(01) page 5). chemical-engineering.at. https://doi.org/10.34726/607 ( reposiTUm)

Senfter, T., Stern, B., Pillei, M., Senn, M., Berger, M., Kofler, T., Mayerl, C., Ehrensberger, C., & Kraxner, M. (2020). Feasibility Study for the Separation of Solid Particles from High-Pressure Water Jet Process Water with a Hydrocyclone. In C. Jordan (Ed.), Proceedings of the 16th Minisymposium Verfahrenstechnik and 7th Partikelforum (TU Wien, Sept. 21/22, 2020) (pp. DiP3-(07) page 1-DiP3-(07) page 4). chemical-engineering.at. https://doi.org/10.34726/589 ( reposiTUm)

Fritsch, L., Senfter, T., Berger, M., Kofler, T., Holzer, S., Mayerl, C., Pillei, M., & Kraxner, M. (2020). Thickening of sludges in a wastewater treatment plant with a hydrocyclone. In C. Jordan (Ed.), Proceedings of the 16th Minisymposium Verfahrenstechnik and 7th Partikelforum (TU Wien, Sept. 21/22, 2020) (pp. DiV1-(01) page 1-DiV1-(01) page 4). chemical-engineering.at. https://doi.org/10.34726/610 ( reposiTUm)

Holzer, S., Senfter, T., Kofler, T., Mayerl, C., Pillei, M., & Kraxner, M. (2020). Separation of Solids from Washing Machine Waste Water using a Hydrocyclone. In C. Jordan (Ed.), Proceedings of the 16th Minisymposium Verfahrenstechnik and 7th Partikelforum (TU Wien, Sept. 21/22, 2020) (pp. DiP3-(09) page 1-DiP3-(09) page 4). chemical-engineering.at. https://doi.org/10.34726/611 ( reposiTUm)

Niel, J., Weiß, B., & Wukovits, W. (2020). Influences of Selective Waste Gas Recirculation on the Sinter Plant Process. In C. Jordan (Ed.), Proceedings of the 16th Minisymposium Verfahrenstechnik and 7th Partikelforum (TU Wien, Sept. 21/22, 2020) (pp. MoV2-(02) page 1-MoV2-(02) page 5). chemical-engineering.at. https://doi.org/10.34726/545 ( reposiTUm)

Lanzerstorfer, C. (2020). The Wall friction of fine granular plastic powders. In C. Jordan (Ed.), Proceedings of the 16th Minisymposium Verfahrenstechnik and 7th Partikelforum (TU Wien, Sept. 21/22, 2020) (pp. DiP3-(06) page 1-DiP3-(06) page 4). chemical-engineering.at. https://doi.org/10.34726/588 ( reposiTUm)

Lampl, D., & Lanzerstorfer, C. (2020). The porosity of iron ore sinter. In C. Jordan (Ed.), Proceedings of the 16th Minisymposium Verfahrenstechnik and 7th Partikelforum (TU Wien, Sept. 21/22, 2020) (pp. MoP3-(12) page 1-MoP3-(12) page 4). chemical-engineering.at. https://doi.org/10.34726/591 ( reposiTUm)

Prinz, M., Zollner-Croll, H., & Wölfle, C. (2020). Hygiene Paper Softness - New insight into the manufacturing process with an optimised tissue softness analyser. In C. Jordan (Ed.), Proceedings of the 16th Minisymposium Verfahrenstechnik and 7th Partikelforum (TU Wien, Sept. 21/22, 2020) (pp. DiV5-(03) page 1-DiV5-(03) page 5). chemical-engineering.at. https://doi.org/10.34726/627 ( reposiTUm)

Kaissl, J., Angerbauer, A., Heim, D., & Forsich, C. (2020). Prevention of M-A-P-fouling using DLC in a sewage treatment plant. In C. Jordan (Ed.), Proceedings of the 16th Minisymposium Verfahrenstechnik and 7th Partikelforum (TU Wien, Sept. 21/22, 2020) (pp. DiV1-(03) page 1-DiV1-(03) page 4). chemical-engineering.at. https://doi.org/10.34726/616 ( reposiTUm)

Neuner, T., Meister, M., Koch, M., & Rauch, W. (2020). Ultrasonic flow field measurement in agitated lab-scale reactors for optimization of anaerobic digesters. In C. Jordan (Ed.), Proceedings of the 16th Minisymposium Verfahrenstechnik and 7th Partikelforum (TU Wien, Sept. 21/22, 2020) (pp. MoP3-(02) page 1-MoP3-(02) page 4). chemical-engineering.at. https://doi.org/10.34726/624 ( reposiTUm)

Back, J., Spruck, M., Koch, M., & Penner, S. (2020). Diclofenac Removal and Fouling Behaviour of Multi-Channel Mixed Matrix Membranes (MCMMM) with Activated Carbon. In C. Jordan (Ed.), Proceedings of the 16th Minisymposium Verfahrenstechnik and 7th Partikelforum (TU Wien, Sept. 21/22, 2020) (pp. DiV1-(04) page 1-DiV1-(04) page 7). chemical-engineering.at. https://doi.org/10.34726/626 ( reposiTUm)

Gehringer, S., & Flachberger, H. (2020). Controlled charging of mineral surfaces for a successful separation in the electrostatic field. In C. Jordan (Ed.), Proceedings of the 16th Minisymposium Verfahrenstechnik and 7th Partikelforum (TU Wien, Sept. 21/22, 2020) (pp. DiP3-(10) page 1-DiP3-(10) page 4). chemical-engineering.at. https://doi.org/10.34726/614 ( reposiTUm)

Lechleitner, A., Schubert, T., Lehner, M., & Hofer, W. (2020). Reactor Modeling for Up Scaling a Plastic Pyrolysis Process. In C. Jordan (Ed.), Proceedings of the 16th Minisymposium Verfahrenstechnik and 7th Partikelforum (TU Wien, Sept. 21/22, 2020) (pp. MoP3-(09) page 1-MoP3-(09) page 4). chemical-engineering.at. https://doi.org/10.34726/613 ( reposiTUm)

Windisch-Kern, S., Holzer, A., Nagovnak, P., Ponak, C., & Raupenstrauch, H. (2020). Pyrometallurgical recycling of lithium ion batteries: Preliminary experiments to investigate the behaviour of cathode materials under reducing conditions. In C. Jordan (Ed.), Proceedings of the 16th Minisymposium Verfahrenstechnik and 7th Partikelforum (TU Wien, Sept. 21/22, 2020) (pp. MoV1-(04) page 1-MoV1-(04) page 5). chemical-engineering.at. https://doi.org/10.34726/594 ( reposiTUm)

Schlager, M., Triebl, A., Wolf-Zöllner, V., & Lehner, M. (2020). Towards Tailored Column Packings for Emission Reduction of Marine Ships. In C. Jordan (Ed.), Proceedings of the 16th Minisymposium Verfahrenstechnik and 7th Partikelforum (TU Wien, Sept. 21/22, 2020) (pp. DiP3-(11) page 1-DiP3-(11) page 5). chemical-engineering.at. https://doi.org/10.34726/584 ( reposiTUm)

Braunsperger, T., & Ellersdorfer, M. (2020). Hydrothermal liquefaction of biogenic residues and microalgae. In C. Jordan (Ed.), Proceedings of the 16th Minisymposium Verfahrenstechnik and 7th Partikelforum (TU Wien, Sept. 21/22, 2020) (pp. MoP3-(07) page 1-MoP3-(07) page 4). chemical-engineering.at. https://doi.org/10.34726/623 ( reposiTUm)

Kandlbauer, L., Khodier, K., & Sarc, R. (2020). Investigation of particle descriptors for size characterisation of solid waste particles for treatment process control. In C. Jordan (Ed.), Proceedings of the 16th Minisymposium Verfahrenstechnik and 7th Partikelforum (TU Wien, Sept. 21/22, 2020) (pp. DiV5-(02) page 1-DiV5-(02) page 5). chemical-engineering.at. https://doi.org/10.34726/622 ( reposiTUm)

Swaminathan, S., Spijker, C., Raupenstrauch, H., & Kofler, I. (2020). Performance optimisation approaches for NOx Postprocessor with detailed chemistry model using OpenFOAM. In C. Jordan (Ed.), Proceedings of the 16th Minisymposium Verfahrenstechnik and 7th Partikelforum (TU Wien, Sept. 21/22, 2020) (pp. DiV2-(04) page 1-DiV2-(04) page 4). chemical-engineering.at. https://doi.org/10.34726/597 ( reposiTUm)

Salbrechter, K., & Lehner, M. (2020). Renewable Gasfield – a Biogas to SNG demo plant. In C. Jordan (Ed.), Proceedings of the 16th Minisymposium Verfahrenstechnik and 7th Partikelforum (TU Wien, Sept. 21/22, 2020) (pp. MoP3-(05) page 1-MoP3-(05) page 4). chemical-engineering.at. https://doi.org/10.34726/602 ( reposiTUm)

Rath, A., Spijker, C., & Raupenstrauch, H. (2020). Modelling of an indirect-fired heat treatment line using an implicit multiple one- dimensional approach. In C. Jordan (Ed.), Proceedings of the 16th Minisymposium Verfahrenstechnik and 7th Partikelforum (TU Wien, Sept. 21/22, 2020) (pp. MoV1-(02) page 1-MoV1-(02) page 6). chemical-engineering.at. https://doi.org/10.34726/581 ( reposiTUm)

Khodier, K., Lehner, M., & Sarc, R. (2020). Empirical modeling of compositions in chemical engineering. In C. Jordan (Ed.), Proceedings of the 16th Minisymposium Verfahrenstechnik and 7th Partikelforum (TU Wien, Sept. 21/22, 2020) (pp. DiV4-(01) page 1-DiV4-(01) page 4). chemical-engineering.at. https://doi.org/10.34726/625 ( reposiTUm)

Harter, T., Bernt, I., & Hirn, U. (2020). Dispersibility of hydroentangled wetlaid nonwovens. In C. Jordan (Ed.), Proceedings of the 16th Minisymposium Verfahrenstechnik and 7th Partikelforum (TU Wien, Sept. 21/22, 2020) (pp. DiP3-(08) page 1-DiP3-(08) page 4). chemical-engineering.at. https://doi.org/10.34726/606 ( reposiTUm)

Maitz, S., Lanz, J., Siebenhofer, M., & Kienberger, M. (2020). Hemicellulose degradation upon hydrothermal treatment of black liquor. In C. Jordan (Ed.), Proceedings of the 16th Minisymposium Verfahrenstechnik and 7th Partikelforum (TU Wien, Sept. 21/22, 2020) (pp. MoP3-(08) page 1-MoP3-(08) page 4). chemical-engineering.at. https://doi.org/10.34726/609 ( reposiTUm)

Marius, B., & Hacker, V. (2020). Evaluation of Transient Voltage Behaviour During Load Changes in Automotive PEM Fuel Cells. In C. Jordan (Ed.), Proceedings of the 16th Minisymposium Verfahrenstechnik and 7th Partikelforum (TU Wien, Sept. 21/22, 2020) (pp. DiP3-(04) page 1-DiP3-(04) page 3). chemical-engineering.at. https://doi.org/10.34726/612 ( reposiTUm)

Madlmeir, S., & Radl, S. (2020). Statistical Modeling of the Coating Uniformity in a Wurster Coating Process. In C. Jordan (Ed.), Proceedings of the 16th Minisymposium Verfahrenstechnik and 7th Partikelforum (TU Wien, Sept. 21/22, 2020) (pp. DiV5-(04) page 1-DiV5-(04) page 5). chemical-engineering.at. https://doi.org/10.34726/621 ( reposiTUm)

Simoes, M., Urstöger, G., Schennach, R., & Hirn, U. (2020). Linking Adhesion Force to Area in Molecular Contact measured by FRET spectroscopy. In C. Jordan (Ed.), Proceedings of the 16th Minisymposium Verfahrenstechnik and 7th Partikelforum (TU Wien, Sept. 21/22, 2020) (pp. DiV4-(02) page 1-DiV4-(02) page 5). chemical-engineering.at. https://doi.org/10.34726/608 ( reposiTUm)

Matic, J., & Khinast, J. (2020). Simulation Aided Pharmaceutical Hot Melt Extrusion Process Understanding, Setup and Scale-up. In C. Jordan (Ed.), Proceedings of the 16th Minisymposium Verfahrenstechnik and 7th Partikelforum (TU Wien, Sept. 21/22, 2020) (pp. DiV2-(03) page 1-DiV2-(03) page 5). chemical-engineering.at. https://doi.org/10.34726/596 ( reposiTUm)

Rudelstorfer, G., Grafschafter, A., & Siebenhofer, M. (2020). The Taylor-Couette Disc Contactor, a novel gas-liquid multiphase contactor. In C. Jordan (Ed.), Proceedings of the 16th Minisymposium Verfahrenstechnik and 7th Partikelforum (TU Wien, Sept. 21/22, 2020) (pp. DiV4-(04) page 1-DiV4-(04) page 4). chemical-engineering.at. https://doi.org/10.34726/593 ( reposiTUm)

Wolf, S., Roschger, M., & Hacker, V. (2020). Development and Characterization of Carbon Supported Palladium-based Anode Catalysts for the Alkaline Direct Ethanol Fuel Cell. In C. Jordan (Ed.), Proceedings of the 16th Minisymposium Verfahrenstechnik and 7th Partikelforum (TU Wien, Sept. 21/22, 2020) (pp. DiP3-(02) page 1-DiP3-(02) page 6). chemical-engineering.at. https://doi.org/10.34726/595 ( reposiTUm)

Samsudin, A. M., & Hacker, V. (2020). Preparation and Characterization of Poly(vinyl alcohol)-based Anion Exchange Membranes. In C. Jordan (Ed.), Proceedings of the 16th Minisymposium Verfahrenstechnik and 7th Partikelforum (TU Wien, Sept. 21/22, 2020) (pp. DiP3-(03) page 1-DiP3-(03) page 3). chemical-engineering.at. https://doi.org/10.34726/604 ( reposiTUm)

Loder, A., Lux, S., & Siebenhofer, M. (2020). Iron carbonate ore beneficiation by direct reduction with hydrogen. In C. Jordan (Ed.), Proceedings of the 16th Minisymposium Verfahrenstechnik and 7th Partikelforum (TU Wien, Sept. 21/22, 2020) (pp. MoP3-(11) page 1-MoP3-(11) page 3). chemical-engineering.at. https://doi.org/10.34726/587 ( reposiTUm)

Tausendschön, J., & Radl, S. (2020). Deep Neural Network-based View factor Modelling of Radiative Heat Transfer between Particles. In C. Jordan (Ed.), Proceedings of the 16th Minisymposium Verfahrenstechnik and 7th Partikelforum (TU Wien, Sept. 21/22, 2020) (pp. MoV5-(03) page 1-MoV5-(03) page 3). chemical-engineering.at. https://doi.org/10.34726/601 ( reposiTUm)

Mandlez, D., Zangl-Jagiello, L., Eckhart, R., & Bauer, W. (2020). Improved Breaking Length Development of Unbleached Softwood Kraft Pulp in PFI Refining by Addition of Primary Fines. In C. Jordan (Ed.), Proceedings of the 16th Minisymposium Verfahrenstechnik and 7th Partikelforum (TU Wien, Sept. 21/22, 2020) (pp. MoV4-(02) page 1-MoV4-(02) page 5). chemical-engineering.at. https://doi.org/10.34726/592 ( reposiTUm)

Schmid, T., & Radl, S. (2020). Downsizing and numbering-up of a fiber fractionator. In C. Jordan (Ed.), Proceedings of the 16th Minisymposium Verfahrenstechnik and 7th Partikelforum (TU Wien, Sept. 21/22, 2020) (pp. MoV4-(03) page 1-MoV4-(03) page 4). chemical-engineering.at. https://doi.org/10.34726/585 ( reposiTUm)

Roschger, M., Wolf, S., Garstenauer, D., & Hacker, V. (2020). Development of Palladium and Platinum Based Membrane Electrode Assemblies and Performance Characterization in the Alkaline Direct Ethanol Fuel Cell. In C. Jordan (Ed.), Proceedings of the 16th Minisymposium Verfahrenstechnik and 7th Partikelforum (TU Wien, Sept. 21/22, 2020) (pp. DiP3-(05) page 1-DiP3-(05) page 4). chemical-engineering.at. https://doi.org/10.34726/615 ( reposiTUm)

Kleiber, S., Loder, A., Siebenhofer, M., & Lux, S. (2020). Carbon Dioxide Hydrogenation. In C. Jordan (Ed.), Proceedings of the 16th Minisymposium Verfahrenstechnik and 7th Partikelforum (TU Wien, Sept. 21/22, 2020) (pp. MoP3-(06) page 1-MoP3-(06) page 4). chemical-engineering.at. https://doi.org/10.34726/605 ( reposiTUm)

Schlackl, K., Bischof, R., Fackler, K., & Samhaber, W. (2020). Solute interactions in the nanofiltration of wood hydrolysates. In C. Jordan (Ed.), Proceedings of the 16th Minisymposium Verfahrenstechnik and 7th Partikelforum (TU Wien, Sept. 21/22, 2020) (pp. MoV4-(01) page 1-MoV4-(01) page 4). chemical-engineering.at. https://doi.org/10.34726/590 ( reposiTUm)

Lukitsch, B., Ecker, P., Janeczek, C., Elenkov, M., Keck, T., Neudl, S., Haddadi, B., Jordan, C., Krenn, C.-G., Ullrich, R., Gföhler, M., & Harasek, M. (2019). Fully Resolved CFD Simulation of the CO₂ Transport in a hollow Fiber Membrane Oxygenator Packing. In Hannover 2019 Abstracts from the 46th ESAO Congress (Issue 8). http://hdl.handle.net/20.500.12708/143140 ( reposiTUm)

Wesenauer, F., Jordan, C., Birkelbach, F., Pichler, M., Harasek, M., & Winter, F. (2019). Pore-forming additives in brick production and their behaviour in the burning process - first results of an ongoing investigation. In Conference Proceedings (pp. 56–59). http://hdl.handle.net/20.500.12708/50469 ( reposiTUm)

Pichler, M., Haddadi, B., Jordan, C., Harasek, M., Wesenauer, F., & Winter, F. (2019). A simple calcination model - implementation and validation in OpenFOAM®. In Conference Proceedings (pp. 34–37). http://hdl.handle.net/20.500.12708/50468 ( reposiTUm)

Ecker, P., Lukitsch, B., Janeczek, C., Elenkov, M., Haddadi, B., Jordan, C., Gföhler, M., & Harasek, M. (2019). Prediction of Hemolysis in a Rotary Blood Pump using CFD. In Conference Proceedings (pp. 42–45). http://hdl.handle.net/20.500.12708/50467 ( reposiTUm)

Haddadi, B., Jordan, C., Gößnitzer, C., & Harasek, M. (2019). Development of Computational Fluid Dynamics Multi-Component Adsorption Solver. In Proceedings (pp. 3008–3011). http://hdl.handle.net/20.500.12708/50499 ( reposiTUm)

Jordan, C., Pichler, M., Haddadi, B., Norouzi, H. R., Wesenauer, F., Weber, J., Winter, F., & Harasek, M. (2019). New Method for Numerical Calibration of a Rotary Kiln Model - A Multiscale Approach. In Abstracts (p. 2). http://hdl.handle.net/20.500.12708/50514 ( reposiTUm)

Jordan, C., Pichler, M., Haddadi, B., & Harasek, M. (2019). Fluid flow simulation in packed bed unit operations in chemical engineering. In AHPC19 booklet of abstracts (p. 17). http://hdl.handle.net/20.500.12708/50513 ( reposiTUm)

Haddadi, B., Jordan, C., & Harasek, M. (2019). Increased Modelling Demands by Moving from Resolved to Unresolved Simulation of Heterogeneous Reactive Systems. In Abstracts (p. 2). http://hdl.handle.net/20.500.12708/50515 ( reposiTUm)

Bösenhofer, M., Wartha, E.-M., Jordan, C., Harasek, M., Feilmayr, C., Hauzenberger, F., & König, B. (2019). A Raceway Model Based on Open-Source Software. In Proceedings of the Iron & Steel Technology Conference (p. 12). http://hdl.handle.net/20.500.12708/50458 ( reposiTUm)

Wartha, E.-M., Bösenhofer, M., Jordan, C., & Harasek, M. (2019). Mesh partitioning of reactive flow simulations - Speed-up and other side effects. In Book of Abstracts (p. 6). http://hdl.handle.net/20.500.12708/50440 ( reposiTUm)

Harasek, M., Jordan, C., & Haddadi, B. (2019). Computational Fluid Dynamics in Complex Environments - Combining Device Design and Performance Analysis for Process Intensification. In 18. Österreichische Chemietage (p. 1). http://hdl.handle.net/20.500.12708/50555 ( reposiTUm)

Ecker, P., Janeczek, C., Lukitsch, B., Elenkov, M., Keck, T., Neudl, S., Jordan, C., Haddadi, B., Ullrich, R., Krenn, C.-G., Harasek, M., & Gföhler, M. (2019). Hydraulic Characteristic of a Mixed Flow Blood Pump for an Intracorporeal Membrane Oxygenator. In Hannover 2019 Abstracts from the 46th ESAO Congress (Vols. 42, 8, Issue 8). Sage Publishing. http://hdl.handle.net/20.500.12708/143869 ( reposiTUm)

Bösenhofer, M., Wartha, E.-M., Jordan, C., König, B., & Harasek, M. (2019). Multi-Phase Reactive Systems - Analysis of Involved Time Scales. In Book of Abstracts (p. 6). http://hdl.handle.net/20.500.12708/49701 ( reposiTUm)

Bösenhofer, M., Antunes Paiva, I. I., Tjaden, S., Jordan, C., Harasek, M., Rieger, J., Feilmayr, C., & Hauzenberger, F. (2019). Pulverized Coal Feeding Vessels - Characterization and Optimization. In Proceedings of the Iron & Steel Technology Conference (p. 10). http://hdl.handle.net/20.500.12708/50457 ( reposiTUm)

Bachmann, B., Spitz, S., Rothbauer, M., Jordan, C., Purtscher, M., Mühleder, S., Priglinger, E., Redl, H., Holnthoner, W., & Ertl, P. (2018). Effects of growth factor gradients and indirect flow on vasculature-on-chip. In Abstract Book (p. 96). http://hdl.handle.net/20.500.12708/50331 ( reposiTUm)

Lukitsch, B., Halmschlager, V., Jordan, C., Haddadi, B., & Harasek, M. (2018). Computational development of an intracorporal membrane oxygenator. In Book of Abstracts. 14#^{th} Minisymposium Chemical & Process Engineering, Linz, Austria. http://hdl.handle.net/20.500.12708/50340 ( reposiTUm)

Jordan, C., Haddadi, B., & Harasek, M. (2018). Using CFD approaches for membrane modelling. In Abstracts (p. 33). http://hdl.handle.net/20.500.12708/50402 ( reposiTUm)

Bösenhofer, M., Jordan, C., & Harasek, M. (2018). Radiative Heating of a Single Coal Particle Under Blast Furnace Conditions. In Book of Abstracts. 14#^{th} Minisymposium Chemical & Process Engineering, Linz, Austria. http://hdl.handle.net/20.500.12708/50223 ( reposiTUm)

Janeczek, C., Lukitsch, B., Huber-Dangl, F., Karabegovic, A., Jordan, C., Haddadi, B., Ullrich, R., Krenn, C. G., Gföhler, M., & Harasek, M. (2018). Basic Performance Tests of the MILL Intravascular CO2 Removal Catheter. In Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) (pp. 1506–1509). IEEE. http://hdl.handle.net/20.500.12708/144632 ( reposiTUm)

Harasek, M., Haddadi, B., Jordan, C., & Friedl, A. (2018). CFD modelling of organosolv lignin extraction in packed beds. In A. Friedl, J. J. Klemes, S. Radl, P. S. Varbanov, & T. Wallek (Eds.), Computer Aided Chemical Engineering (pp. 1583–1588). Elsevier B.V. https://doi.org/10.1016/b978-0-444-64235-6.50276-x ( reposiTUm)

Haddadi, B., Gasser, C., Jordan, C., Lendl, B., & Harasek, M. (2018). Process stream characterisation by simultaneous laser doppler velocimetry and stand-off Raman spectroscopy. In Abstracts. APACT 18 - Advances in Progress Analytics and Control Technology 2018 Conference, Newcastle, United Kingdom of Great Britain and Northern Ireland (the). http://hdl.handle.net/20.500.12708/50361 ( reposiTUm)

Bösenhofer, M., Wartha, E.-M., Jordan, C., Harasek, M., Feilmayr, C., & Hauzenberger, F. (2018). Characterization of Gas Phase Reaction Regime in the Raceway Zone. In AISTech 2018 Proceedings (pp. 441–454). http://hdl.handle.net/20.500.12708/50221 ( reposiTUm)

Setoodeh Jahromy, S., Huber, F., Jordan, C., Azam, M., Harasek, M., & Winter, F. (2018). Fly Ash from Municipal Solid Waste Incineration as Potential Thermochemical Energy Storage Material. In Conference Proceedings (p. 22). http://hdl.handle.net/20.500.12708/50403 ( reposiTUm)

Harasek, M., Haddadi, B., Gößnitzer, C., & Jordan, C. (2018). Detailed Analysis of Multicomponent Adsorption Using CFD. In Abstracts (pp. 326–327). http://hdl.handle.net/20.500.12708/50401 ( reposiTUm)

Harasek, M., Pichler, M., Haddadi, B., Norouzi, H. R., & Jordan, C. (2018). Local Contact Point Treatment in Sphere Packings. In Abstracts (pp. 20–21). http://hdl.handle.net/20.500.12708/50400 ( reposiTUm)

Bösenhofer, M., Jordan, C., Harasek, M., Feilmayr, C., Hauzenberger, F., Walk, A., & Tjaden, S. (2018). Pulverized Coal Injection (PCI) Test Facilities and Methods - Overview and Recommendations. In AISTech 2018 Proceedings (pp. 287–295). http://hdl.handle.net/20.500.12708/50222 ( reposiTUm)

Harsfalvi, Z., Jordan, C., Haddadi, B., & Harasek, M. (2017). Computational fluid dynamic analysis of cooling in a mixed vessel using a non-Newtonian medium. In Book of Abstracts (pp. 42–43). http://hdl.handle.net/20.500.12708/50084 ( reposiTUm)

Haddadi, B., Jordan, C., & Harasek, M. (2017). Grid Dependency Study in CFD Computation of Flow Structure in a T-Mixer. In Book of Abstracts. 13. Minisymposium Verfahrenstechnik (13#^{th} Minisymposium Chemical and Process Engineering), Innsbruck, Austria. http://hdl.handle.net/20.500.12708/50081 ( reposiTUm)

Bösenhofer, M., Jordan, C., & Harasek, M. (2017). Difficulties in the characterization of gas phase combustion regimes. In Book of Abstracts. 13. Minisymposium Verfahrenstechnik (13#^{th} Minisymposium Chemical and Process Engineering), Innsbruck, Austria. http://hdl.handle.net/20.500.12708/50082 ( reposiTUm)

Bösenhofer, M., Jordan, C., & Harasek, M. (2017). Towards Generic Reactive Flow Modelling. In Book of Abstracts (pp. 80–81). http://hdl.handle.net/20.500.12708/50083 ( reposiTUm)

Jordan, C., Haddadi, B., & Harasek, M. (2017). Numerical investigation of transitional turbulent mixing. In AHPC 17 (p. 6). http://hdl.handle.net/20.500.12708/50088 ( reposiTUm)

Haddadi, B., Jordan, C., Norouzi, H. R., & Harasek, M. (2017). Numerical Investigation of Particle Types Influence on Packed Bed Adsorber Behaviour. In J. E. Olsen & S. T. Johansen (Eds.), Progress in Applied CFD – CFD2017 (pp. 675–682). SINTEF Academic Press. http://hdl.handle.net/20.500.12708/50079 ( reposiTUm)

Gföhler, M., Janeczek, C., Karabegovic, A., Futter, L., Harasek, M., Haddadi, B., Jordan, C., Krenn, C. G., Neudl, S., & Ullrich, R. (2017). Intracorporeal Membrane Catheter for CO2 Reduction in the Blood - Drive Unit and Control System. In International Journal of Artificial Organs (p. 458). Wichtig Publishing. http://hdl.handle.net/20.500.12708/67770 ( reposiTUm)

Mair, C., Riepl, R., Aigenbauer, S., Höftberger, E., Weissinger, A., Schmidl, C., Haslinger, W., Jordan, C., & Harasek, M. (2017). Experimental study of fouling issues in a biomass pellet driven Stirling engine. In Tagungsband/ Proceedings (p. 206). http://hdl.handle.net/20.500.12708/50099 ( reposiTUm)

Bösenhofer, M., Jordan, C., & Harasek, M. (2017). A Flame D Modelling Study Employing Eddy Dissipation Concept Modifications. In Digital Proceedings (p. 6). http://hdl.handle.net/20.500.12708/50103 ( reposiTUm)

Bösenhofer, M., Harasek, M., Jordan, C., Feilmayr, C., & Hauzenberger, F. (2017). The Relevance of Reaction Mechanisms in the CFD Modelling of Blast Furnaces. In Proceedings (p. 15). http://hdl.handle.net/20.500.12708/50077 ( reposiTUm)

Haddadi, B., Jordan, C., & Harasek, M. (2017). Impact of CFD Partitioning Strategies on Power Efficiency of High Performance Computing. In Proceedings (p. 3). http://hdl.handle.net/20.500.12708/50092 ( reposiTUm)

Haddadi, B., Jordan, C., Norouzi, H. R., & Harasek, M. (2016). Investigation of Pressure Drop of Random Packed Bed Adsorbers. In Abstracts (p. 1). http://hdl.handle.net/20.500.12708/49536 ( reposiTUm)

Bösenhofer, M., Jordan, C., & Harasek, M. (2016). Turbulent Combustion and Developments In OpenFOAM®. In Abstracts (p. 1). http://hdl.handle.net/20.500.12708/49494 ( reposiTUm)

Jordan, C., Haddadi, B., & Harasek, M. (2016). Parallel efficiency of OpenFOAM on VSC-3. In Austrian HPC Meeting 2016 - AHPC16 (p. 18). http://hdl.handle.net/20.500.12708/49403 ( reposiTUm)

Haddadi, B., Jordan, C., Schretter, P., Lassmann, T., & Harasek, M. (2016). Membrane Module Design Optimization Using CFD. In U. Hirn (Ed.), Conference Proceedings - Graz, March 30th and 31st, 2016 (pp. 21–25). Verlag der Technischen Universität Graz. http://hdl.handle.net/20.500.12708/49251 ( reposiTUm)

Jordan, C., & Harasek, M. (2016). Numerical analysis of heat transfer to a biomass fired Stirling engine. In Abstracts (p. 1). http://hdl.handle.net/20.500.12708/49547 ( reposiTUm)

Knoll, C., Müller, D., Deutsch, M., Jordan, C., Harasek, M., Werner, A., & Weinberger, P. (2016). Oxalate and carbonate based thermochemical energy storage materials - reaction kinetics and material optimization. In Book of abstracts (p. 43). http://hdl.handle.net/20.500.12708/49342 ( reposiTUm)

Harasek, M., Maier, C., Jordan, C., Bösenhofer, M., & Feilmayr, C. (2016). Investigation of Alternative Reducing Agent Conversion in the Raceway Cavity of Blast Furnaces by Numerical Simulation. In Proceedings (p. 14). http://hdl.handle.net/20.500.12708/49481 ( reposiTUm)

Haddadi, B., Jordan, C., & Harasek, M. (2015). Numerical Simulation of Adsorption Phenomena Using Multi-Region Approach. In Proceedings (pp. 151–157). http://hdl.handle.net/20.500.12708/48869 ( reposiTUm)

Haddadi, B., Jordan, C., & Harasek, M. (2015). Numerical Simulation of Adsorption Phenomena Using Multi-Region Approach. In VSS VIENNA young SCIENTISTS SYMPOSIUM (pp. 26–27). http://hdl.handle.net/20.500.12708/48931 ( reposiTUm)

Deutsch, M., Fellner, T., Widhalm, J., Aumeyr, C., Jordan, C., Werner, A., Weinberger, P., Gierl-Mayer, C., & Winter, F. (2015). MgO/Mg(OH)2 as a Possible Thermochemical Energy Storage Material. In Proceedings of the 9#^{th} International Conference for Young Researchers and PhD Students (p. 5). http://hdl.handle.net/20.500.12708/48942 ( reposiTUm)

Haddadi, B., Jordan, C., Schretter, P., Lassmann, T., & Harasek, M. (2015). Designing Better Membrane Modules Using CFD. In Proceeding Book (p. 239). http://hdl.handle.net/20.500.12708/49082 ( reposiTUm)

Maier, C., Jordan, C., Feilmayr, C., Thaler, C., & Harasek, M. (2015). Numerical Analysis of Injection of Liquid Hydrocarbons, Processed Waste Plastics and Pulverized Coal Into Blast Furnace Raceways. In AISTech 2015 Proceedings (p. 12). http://hdl.handle.net/20.500.12708/48903 ( reposiTUm)

Jordan, C., Maier, C., Kiss, B., Harsfalvi, Z., & Harasek, M. (2014). Investigation of Liquid Jet Breakup in Blast Furnace Injections. In book of abstracts (p. 21). http://hdl.handle.net/20.500.12708/48504 ( reposiTUm)

Haddadi, B., Martinetz, M., Jordan, C., & Harasek, M. (2014). Numerical Simulation of Adsorption Phenomena. In Proceedings (pp. 78–81). http://hdl.handle.net/20.500.12708/48701 ( reposiTUm)

Maier, C., Jordan, C., Feilmayr, C., Thaler, C., & Harasek, M. (2014). CFD-Modellierung der Eindüsung fester und flüssiger Einsatzstoffe in den Hochofen bei verschiedenen Prozessbedingungen. In www.processnet.org/cfd_mis_rhe2014 (p. 1). http://hdl.handle.net/20.500.12708/46081 ( reposiTUm)

Maier, C., Jordan, C., Feilmayr, C., Thaler, C., & Harasek, M. (2014). Multi-Scale Modeling of Hydrocarbon Injection into the Blast Furnace Raceway. In Proceedings (p. 8). http://hdl.handle.net/20.500.12708/48814 ( reposiTUm)

Maier, C., Jordan, C., Feilmayr, C., Thaler, C., & Harasek, M. (2014). CFD Modeling Study of the Blast Furnace Raceway With Direct Injection of Auxiliary Reducing Agents. In AISTech 2014 Proceedings (p. 10). http://hdl.handle.net/20.500.12708/48777 ( reposiTUm)

Maier, C., Jordan, C., Feilmayr, C., Thaler, C., & Harasek, M. (2013). CFD-Simulation of the Blast Furnace Process: Injection of Heavy Oil and Plastic Particles into the Raceway. In AISTech Proceedings (p. 12). http://hdl.handle.net/20.500.12708/48435 ( reposiTUm)

Maier, C., Jordan, C., Harasek, M., Feilmayr, C., & Thaler, C. (2012). Development and Validation of a CFD-Model for Heterogeneous Transfer Phenomena in Blast Furnace Processes. In 5#^{th} IC-SCCE 2012 (p. 8). http://hdl.handle.net/20.500.12708/47874 ( reposiTUm)

Nagy, J., Jordan, C., & Harasek, M. (2012). Numerical and Experimental Investigation of the Role of Asymmetric Gas Flow in the Breakup of Liquid Droplets. In Proceedings (p. 15). http://hdl.handle.net/20.500.12708/48114 ( reposiTUm)

Maier, C., Jordan, C., Bolhar-Nordenkampf, M., & Harasek, M. (2011). Investigation of Reagent Injection in SNCR Systems of Biomass Fired Combustion Facilities using Computational Fluid Dynamics. In Proceedings of the 9th European Conference on Industrial Furnaces and Boilers (p. 9). http://hdl.handle.net/20.500.12708/47337 ( reposiTUm)

Nagy, J., Jordan, C., & Harasek, M. (2011). Technical Application of a Multiphase Solver in the compressible Flow of a Gaseous and a Liquid Phase. In CFD 2011 (p. 9). http://hdl.handle.net/20.500.12708/47404 ( reposiTUm)

Nagy, J., Horvath, A., Jordan, C., & Harasek, M. (2011). Improvement of an Industrial High Temperature Furnace. In Open Source CFD International Conference Proceedings (p. 14). http://hdl.handle.net/20.500.12708/47458 ( reposiTUm)

Nagy, J., Horvath, A., Jordan, C., & Harasek, M. (2011). CFD Simulation of a High Temperature Furnace. In CFD 2011 (p. 9). http://hdl.handle.net/20.500.12708/47903 ( reposiTUm)

Faschingleitner, J., Höflinger, W., Harasek, M., Jordan, C., Gospodarek, J., Purgar, A., Wolfslehner, J., & Leibrecht, K. (2010). Berechnungsmethoden zum Abscheiden von Staubwolken. In 6.Minisymposium Verfahrenstechnik Tagungsband (pp. 11–21). http://hdl.handle.net/20.500.12708/46840 ( reposiTUm)

Jordan, C., Harasek, M., Zauner, F., Kirchbacher, F., Feilmayr, C., & Schuster, S. (2010). CFD analysis of injection of heavy fuel oil and plastic particles into a blast furnace raceway - Estimation of droplet size distribution. In 6.Minisymposium Verfahrenstechnik Tagungsband (pp. 156–162). http://hdl.handle.net/20.500.12708/46844 ( reposiTUm)

Jordan, C., & Harasek, M. (2010). Infrarot-Thermographie zur Analyse eines neuartigen Tischgrillsystems. In Chemie Ingenieur Technik (pp. 1448–1449). Chemie Ingenieur Technik / Wiley-VCH. http://hdl.handle.net/20.500.12708/46990 ( reposiTUm)

Jordan, C., Harasek, M., Zauner, F., Kirchbacher, F., Feilmayr, C., & Schuster, S. (2010). CFD analysis of injection of heavy fuel oil and plastic particles into a blast furnace raceway - estimation of droplet size distribution. In Summaries 4 - PRES 2010 Conference (pp. 1285–1286). http://hdl.handle.net/20.500.12708/47007 ( reposiTUm)

Jordan, C., Harasek, M., El-Gohary-Ahmed, A., Feilmayr, C., & Schuster, S. (2010). Combined injection of plastic particles and heavy fuel oil into a blast furnace raceway - detailed CFD analysis. In CFD 2010 - Proceedings (p. 9). http://hdl.handle.net/20.500.12708/46863 ( reposiTUm)

Jordan, C., Harasek, M., El-Gohary-Ahmed, A., Feilmayr, C., & Schuster, S. (2010). Combined injection of plastic particles and heavy fuel oil into a blast furnace raceway - detailed CFD analysis. In CFD 2010 - Book of Abstracts Vol.I (p. 184). Eccomas. http://hdl.handle.net/20.500.12708/46860 ( reposiTUm)

Harasek, M., Horvath, A., Jordan, C., & Kuttner, C. (2010). CFD simulation of bubble columns using a VOF model. In CFD 2010 - Proceedings (p. 7). http://hdl.handle.net/20.500.12708/46862 ( reposiTUm)

Harasek, M., Horvath, A., Jordan, C., & Kuttner, C. (2010). CFD simulation of bubble columns using the VOF model. In CFD 2010 - Book of Abstracts Vol.II (p. 475). Eccomas. http://hdl.handle.net/20.500.12708/46861 ( reposiTUm)

Jordan, C., & Harasek, M. (2009). Entwicklung einer Feuerungsanlage für rieselfähige Biomasse. In Chemie Ingenieur Technik (pp. 1134–1135). Wiley-VCH. http://hdl.handle.net/20.500.12708/46601 ( reposiTUm)

Maier, C., Jordan, C., & Harasek, M. (2009). Numerical simulation of the post combustion zone of biomass firing systems. In Proceedings of the European Combustion Meeting 2009 (p. 6). http://hdl.handle.net/20.500.12708/46424 ( reposiTUm)

Maier, C., Jordan, C., & Harasek, M. (2009). Investigation of the Gas-Phase Combustion in the Post Combustion Zone of Fluidized Bed Firing Systems. In 5.Minisymposium Verfahrenstechnik - Tagungsband (pp. 125–131). http://hdl.handle.net/20.500.12708/46432 ( reposiTUm)

Horvath, A., Jordan, C., & Kuttner, C. (2009). CFD Simulation of Bubble Columns using the VOF Model - Comparison of two Solvers with an Experiment. In 5.Minisymposium Verfahrenstechnik - Tagungsband (pp. 91–97). http://hdl.handle.net/20.500.12708/46430 ( reposiTUm)

Horvath, A., Jordan, C., Lukasser, M., Kuttner, C., Makaruk, A., & Harasek, M. (2009). CFD Simulation of Bubble Columns using the VOF Model : Comparison of commercial and Open Source Solvers with an Experiment. In Pres09 (cdr) (p. 6). http://hdl.handle.net/20.500.12708/46412 ( reposiTUm)

Jordan, C., Harasek, M., Maier, C., Winter, F., Aichinger, G., Feilmayr, C., & Schuster, S. (2008). CFD Simulation of Heat Transfer and High Temperature Conversion of Plastic Particles after Injection into Blast Furnace Raceway. In Proceedings of Int.Symposium on Advances in Computational Heat Transfer (p. 13). http://hdl.handle.net/20.500.12708/46117 ( reposiTUm)

Jordan, C., Harasek, M., Maier, C., Winter, F., Aichinger, G., Feilmayr, C., & Schuster, S. (2008). Simulation of Plastic Particles Injection into the Raceway of a Blast Furnace. In Proceedings of AISTech 2008 (p. 10). http://hdl.handle.net/20.500.12708/46121 ( reposiTUm)

Jordan, C., & Harasek, M. (2008). Improvement of a combustion unit based on a grate furnance for granular dry solid biofuels using CFD methods. In PRES 2008 and System Engineering (p. 1). http://hdl.handle.net/20.500.12708/46135 ( reposiTUm)

Harasek, M., Horvath, A., Jordan, C., Kuttner, C., & Lukasser, M. (2008). CFD Simulation einer Blasensäule mit dem VOF Modell - Fluent vs. OpenFOAM vs. Experiment. In Chemie Ingenieur Technik (p. 1291). Wiley-VCH. http://hdl.handle.net/20.500.12708/46237 ( reposiTUm)

Maier, C., Jordan, C., Bolhar-Nordenkampf, M., Kaiser, S., & Harasek, M. (2008). CFD-Simulation of the Gas Phase Combustion in Stationary Fluidized-Bed Firing Systems. In Circulating Fluidized Bed Technology IX. 9#^{th} International Conference on Circulating Fluidized Beds, Hamburg, EU. http://hdl.handle.net/20.500.12708/46043 ( reposiTUm)

Harasek, M., Jordan, C., Winter, F., Aichinger, G., Feilmayr, C., & Schuster, S. (2007). Evaluation of the High Temperature Conversion of Plastic Particles after Injection into Blast Furnace Raceway Using CFD Simulations. In Prc.of AIChE Annual Meeting (p. 8). http://hdl.handle.net/20.500.12708/45933 ( reposiTUm)

Horvath, A., Jordan, C., Forstner, G., Altacher, P., & Harasek, M. (2006). Control of emission of reactive gas from a paper laminating machine by use of CFD. In W. Höflinger (Ed.), Chemical Industry and Environment V (5#^{th} European meeting on Chemical Industry and Environment) (pp. 643–651). Ferdinand Berger & Söhne GmbH. http://hdl.handle.net/20.500.12708/45446 ( reposiTUm)

Horvath, A., Jordan, C., & Harasek, M. (2006). Emissionsreduktion von Reaktivgas aus einer Laminiermaschine mit Hilfe von CFD. In GVC/Dechema-Jahrestagungen 2006 (p. 1259). Chemie Ingenieur Technik/Wiley-VCH Verlag. http://hdl.handle.net/20.500.12708/45510 ( reposiTUm)

Jordan, C., Miltner, M., Potetz, A., & Harasek, M. (2005). Modellierung turbulenter Freistrahlen mit numerischer Strömungssimulation (CFD). In Chemie Ingenieur Technik (pp. 1061–1062). WILEY-VCH. http://hdl.handle.net/20.500.12708/45193 ( reposiTUm)

Maier, C., Jordan, C., Harasek, M., & Varmuza, K. (2005). Predicting the pressure drop of cyclones by combined application of computational fluid dynamics and chemometric methods. In Conferentia Chemometrica 2005, Chemometrics VII (p. P18). http://hdl.handle.net/20.500.12708/45196 ( reposiTUm)

Harasek, M., Jordan, C., & Raubik, G. (2005). Numerische Simulation der Ranque-Hilsch-Vortextube. In Chemie Ingenieur Technik (p. 1063). WILEY-VCH. http://hdl.handle.net/20.500.12708/45194 ( reposiTUm)

Miltner, M., Kerschbaum, A., Jordan, C., Harasek, M., & Friedl, A. (2005). Process Simulation And CFD Calculations For The Development Of An Innovative Baled Biomass-Fired Combustion Chamber. In Chemical Engineering Transactions (pp. 345–350). AIDIC servizi SRL. http://hdl.handle.net/20.500.12708/45129 ( reposiTUm)

Beiträge in Büchern

Setoodeh Jahromy, S., Jordan, C., Harasek, M., & Winter, F. (2019). Flugasche als thermochemischer Energie- und CO2-Speicher. In Mineralische Nebenprodukte und Abfälle (pp. 219–225). Thome-Kozmiensky Verlag GmbH. http://hdl.handle.net/20.500.12708/30087 ( reposiTUm)

Setoodeh Jahromy, S., Jordan, C., Harasek, M., & Winter, F. (2019). Fly Ash as a Material for Thermochemical Energy and C02 Storage. In S. Thiel, E. Thome-Kozmiensky, F. Winter, & D. Juchelkova (Eds.), Waste Management - Waste-to-Energy (pp. 767–774). Thome-Kozmiensky Verlag GmbH. http://hdl.handle.net/20.500.12708/30118 ( reposiTUm)

Bücher

Haddadi Sisakht, B., Jordan, C., & Harasek, M. (Eds.). (2023). OpenFOAM Basic Training (6th ed.). Engineering Fluid Dynamics. https://doi.org/10.34726/5042 ( reposiTUm)

Haddadi Sisakht, B., Jordan, C., & Harasek, M. (Eds.). (2019). OpenFOAM® Basic Training (5th edition). chemical-engineering.at. https://doi.org/10.34726/502 ( reposiTUm)

Tagungsbände

Jordan, C. (Ed.). (2020). Proceedings of the 16th Minisymposium Verfahrenstechnik and 7th Partikelforum. chemical-engineering.at. http://hdl.handle.net/20.500.12708/24795 ( reposiTUm)

Jordan, C. (Ed.). (2020). Proceedings of the 16. Minisymposium Verfahrenstechnik & 7. Partikelforum (TU Wien, Sept. 21/22, 2020). chemical-engineering.at. https://doi.org/10.34726/541 ( reposiTUm)

Jordan, C. (Ed.). (2014). 10. Minisymposium Verfahrenstechnik - Proceedings. Vienna University of Technology (TU Wien), Institute of Chemical Engineering. http://hdl.handle.net/20.500.12708/23837 ( reposiTUm)

Jordan, C. (Ed.). (2009). Minisymposium Verfahrenstechnik (Tagungsband). TU Wien, Inst.für Verfahrenstechnik, Umwelttechnik und Techn.Biowissenschaften. http://hdl.handle.net/20.500.12708/23032 ( reposiTUm)

Präsentationen

Hofbauer, C., Serna Loaiza, S., Harter, T., Zelaya-Lainez, L., Scolari, L., Jordan, C., Hirn, U., Füssl, J., Lukacevic, M., & Harasek, M. (2024, August 28). Tailored holocellulose fibers from spruce wood chips: Influence of temperature in peracetic acid pulping [Poster Presentation]. 17th European Workshop on Lignocellulosics and Pulp, Turku, Finland. https://doi.org/10.34726/7400 ( reposiTUm)

Imran, F., Lück, R., Jordan, C., Herwig, C., & Harasek, M. (2023, October 25). A Mini-Perspective on the Role of Digitalization Enablers in Sustainable Pharmaceutical Manufacturing [Conference Presentation]. 2nd International Conference on Energy, Environment and Digital Transition, Palermo, Italy. ( reposiTUm)

Aziaba, K., Teufner-Kabas, M., Jordan, C., & Harasek, M. (2022, May 0). Simulation of multi-component gas mixture separation with the open-source simulation tool DWSIM [Conference Presentation]. Jahrestreffen der ProcessNet-Fachgruppen Extraktion, Membrantechnik und Phytoextrakte, Frankfurt am Main, Germany. ( reposiTUm)

Aziaba, K., Teufner-Kabas, M., Jordan, C., & Harasek, M. (2022, August 24). Implementation of a pervaporation membrane module in process simulation for the separation of ternary and quaternary mixtures [Conference Presentation]. ACHEMA 22’, Frankfurt am Main, Germany. ( reposiTUm)

Haddadi Sisakht, B., Jordan, C., & Harasek, M. (2022, June 9). Remeshing – CFD simulation of moving objects with overlapping trajectories [Conference Presentation]. ECCOMASS Congress 2022, Oslo, Norway. http://hdl.handle.net/20.500.12708/153170 ( reposiTUm)

Smith, J., Jordan, C., Harasek, M., Werner, A., & Weinberger, P. (2022, September 20). Synthesis and cycle stability of mixed Tutton salts as thermochemical energy storage materialsas materials [Poster Presentation]. Österreichische Chemietage 2022, Wien, Austria. ( reposiTUm)

Ramonet Marques, F., Haddadi Sisakht, B., Jordan, C., & Harasek, M. (2022, September 8). Modelling and Design of Optimal Internal Loop Air-Lift Reactor Configurations Through Computational Fluid Dynamics [Conference Presentation]. 25th Conference on Process Integration for Energy Saving and Pollution Reduction – PRES’22, Bol, Croatia. ( reposiTUm)

Ramonet Marques, F., Jordan, C., Haddadi Sisakht, B., & Harasek, M. (2022, October 23). Anaerobic Digestion as a Carbon Capture, Storage, and Utilization Technology [Conference Presentation]. 1st International Conference on Energy, Environment & Digital Transition - E2DT, Mailand, Italy. http://hdl.handle.net/20.500.12708/152843 ( reposiTUm)

Weiß, B. D., Haddadi Sisakht, B., Jordan, C., Bösenhofer, M., Ladinek, T., & Harasek, M. (2022, October 24). Magnesium bisulfite spent liquor combustion – computational fluid dynamic simulation of liquid fuel spraying [Poster Presentation]. E2DT Conference, Mailand, Italy. http://hdl.handle.net/20.500.12708/152687 ( reposiTUm)

Weiß, B., Pichler, M., Jordan, C., Haddadi, B., & Harasek, M. (2021). Process simulation and upscaling of a homoacetogenesis process using Aspen Plus®. Bio Carboncapture Webinar (Online Conference), Wien, Austria. http://hdl.handle.net/20.500.12708/101595 ( reposiTUm)

Haddadi, B., Jordan, C., & Harasek, M. (2020). Simulation of Roots Pump. Final Report Presentation (Online), Wien, Austria. http://hdl.handle.net/20.500.12708/101514 ( reposiTUm)

Haddadi, B., Jordan, C., & Harasek, M. (2020). Re-meshing: an Approach for Simulation of the Moving Objects with Overlapping. Austrian OpenFOAM Meeting 2020 (Online Konferenz), Linz, Austria. http://hdl.handle.net/20.500.12708/101512 ( reposiTUm)

Lukitsch, B., Ecker, P., Janeczek, C., Elenkov, M., Keck, T., Neudl, S., Haddadi, B., Jordan, C., Krenn, C.-G., Ullrich, R., Gföhler, M., & Harasek, M. (2019). Fully Resolved CFD Simulation of the CO₂ Transport in a hollow Fiber Membrane Oxygenator Packing. XLVI ESAO Congress, Hannover, Germany. http://hdl.handle.net/20.500.12708/101321 ( reposiTUm)

Laminger, T., & Jordan, C. (2019). Mikroplastik: wo es sich versteckt, wie du es meiden kannst. Kinderuni Wien 2019, Wien, Austria. http://hdl.handle.net/20.500.12708/101134 ( reposiTUm)

Harasek, M., Lukitsch, B., Ecker, P., Janeczek, C., Elenkov, M., Keck, T., Haddadi, B., Jordan, C., Neudl, S., Krenn, C.-G., Ullrich, R., & Gföhler, M. (2019). Fully Resolved Computational (CFD) and Experimental Analysis of Pressure Drop and Blood Gas Transport in a Hollow Fibre Membrane Oxygenator Module. PRES’19 - 22#^{nd} Conference on Process Integration for Energy Saving and Pollution Reduction, Agios Nikolaos, Kreta, Greece. http://hdl.handle.net/20.500.12708/101318 ( reposiTUm)

Ecker, P., Janeczek, C., Lukitsch, B., Elenkov, M., Keck, T., Neudl, S., Jordan, C., Haddadi, B., Ullrich, R., Krenn, C.-G., Harasek, M., & Gföhler, M. (2019). Hydraulic Characteristic of a Mixed Flow Blood Pump for an Intracorporeal Membrane Oxygenator. XLVI ESAO Congress, Hannover, Germany. http://hdl.handle.net/20.500.12708/101322 ( reposiTUm)

Setoodeh Jahromy, S., Jordan, C., Harasek, M., & Winter, F. (2019). Flugasche als thermochemischer Energie- und CO₂-Speicher. Berliner Konferenz Mineralische Nebenprodukte und Abfälle 2019, Berlin, Germany. http://hdl.handle.net/20.500.12708/101186 ( reposiTUm)

Reif, D., Jordan, C., Haddadi, B., Harasek, M., Krampe, J., & Kreuzinger, N. (2019). Development of an adsorption-filtration module for CEC removal. 9th IWA Specialized Membrane Technology conference & Exhibition for Water and Wastewater Treatment and Reuse, Toulouse, France. http://hdl.handle.net/20.500.12708/115138 ( reposiTUm)

Harasek, M., Jordan, C., Bösenhofer, M., Wartha, E.-M., & Tjaden, S. (2019). Reliable CFD Models: Development, Calibration, Validation. K1MET Simulation Conference, Linz, Austria. http://hdl.handle.net/20.500.12708/101148 ( reposiTUm)

Setoodeh Jahromy, S., Jordan, C., Harasek, M., & Winter, F. (2018). Advanced Application of Fly Ash. 10. Österreichisches IEA Wirbelschichttreffen, Timelkam, Austria. http://hdl.handle.net/20.500.12708/100935 ( reposiTUm)

Harasek, M., Haddadi, B., Jordan, C., & Friedl, A. (2018). CFD modelling of organosolv lignin extraction in packed beds. Escape28 - 28#^{th} European Symposium on Computer Aided Process Engineering, Graz, Austria. http://hdl.handle.net/20.500.12708/100853 ( reposiTUm)

Harasek, M., Pichler, M., Haddadi, B., Norouzi, H. R., & Jordan, C. (2018). Influence of Local Contact Point Treatment on Porosity and Pressure Drop in Packed Bed Simulations. PFAU, Austrian OpenFOAM User Meeting, Wien, Austria. http://hdl.handle.net/20.500.12708/100977 ( reposiTUm)

Lukitsch, B., Haddadi, B., Ecker, P., Jordan, C., Gföhler, M., Janeczek, C., Neudl, S., Ullrich, R., & Harasek, M. (2018). Challenges in Simulation of Blood Gas Transport in Hollow Fiber Membrane Oxygenators. PFAU 17: Palaver on Foam - Austrian Users “Stammtisch,” Wien, Austria. http://hdl.handle.net/20.500.12708/100828 ( reposiTUm)

Lukitsch, B., Haddadi, B., Jordan, C., Halmschlager, V., Gföhler, M., Janeczek, C., Karabegovic, A., Huber-Dangl, F., Krenn, C.-G., Ullrich, R., & Harasek, M. (2018). Challenges in Simulation of Blood Gas Transport in Hollow Fiber Membrane Oxygenators. PFAU 16: Palaver on Foam - Austrian Users “Stammtisch,” Linz, Austria. http://hdl.handle.net/20.500.12708/100829 ( reposiTUm)

Jordan, C., & Harasek, M. (2018). Einsatz von CFD zur Verfahrensoptimierung. 10. Österreichisches IEA Wirbelschichttreffen, Timelkam, Austria. http://hdl.handle.net/20.500.12708/100891 ( reposiTUm)

Jordan, C., & Laminger, T. (2018). Mikroplastik: wo es sich versteckt, wie du es meiden kannst. Kinderuni 2018, Wien, Austria. http://hdl.handle.net/20.500.12708/100727 ( reposiTUm)

Jordan, C., & Laminger, T. (2018). Mikroplastik: wo es sich versteckt, wie du es meiden kannst. Kinderuni 2018, Wien, Austria. http://hdl.handle.net/20.500.12708/100728 ( reposiTUm)

Bösenhofer, M., Jordan, C., & Harasek, M. (2018). Radiation in particle clouds. First Annual K1-Met Simulation Conference, Wien, Austria. http://hdl.handle.net/20.500.12708/100655 ( reposiTUm)

Harasek, M., Bösenhofer, M., Wartha, E.-M., & Jordan, C. (2018). TUW-IVT and K1-MET - Cooperation Highlights. First Annual K1-Met Simulation Conference, Wien, Austria. http://hdl.handle.net/20.500.12708/100647 ( reposiTUm)

Janeczek, C., Ecker, P., Huber-Dangl, F., Karabegovic, A., Lukitsch, B., Harasek, M., Jordan, C., Ullrich, R., & Gföhler, M. (2018). The Minimally Invasive Liquid Lung Catheter: In-Vitro Results in a Model Environment. ESAO 2018 - 45th Annual Congress of the European Society for Artificial Organs, Madrid, Spain. http://hdl.handle.net/20.500.12708/95040 ( reposiTUm)

Janeczek, C., Lukitsch, B., Huber-Dangl, F., Karabegovic, A., Jordan, C., Haddadi, B., Ullrich, R., Krenn, C. G., Gföhler, M., & Harasek, M. (2018). Basic Performance Tests of the MILL Intravascular CO2 Removal Catheter. 40th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 18, Honolulu, United States of America (the). http://hdl.handle.net/20.500.12708/95039 ( reposiTUm)

Harasek, M., Haddadi, B., Jordan, C., Harsfalvi, Z., Bösenhofer, M., Lukitsch, B., Wartha, E.-M., Ecker, P., & Pichler, M. (2017). CFD @ TU Wien. Science Breakfast, Wien, Austria. http://hdl.handle.net/20.500.12708/100508 ( reposiTUm)

Ecker, P., Haddadi, B., Jordan, C., & Harasek, M. (2017). Feasibility study of the γ-Reθ turbulence model for internal mixing. PFAU 15: Palaver on Foam - Austrian Users “Stammtisch,” Leoben, Austria. http://hdl.handle.net/20.500.12708/100599 ( reposiTUm)

Harasek, M., Haddadi, B., Jordan, C., Halmschlager, V., Gföhler, M., Janeczek, C., Karabegovic, A., Futter, L., Krenn, C.-G., Neudl, S., & Ullrich, R. (2017). Intracorporeal Membrane Catheter for CO₂ Reduction in a Blood-Membrane Contactor. ESAO 2017 - 44#^{th} Annual Congress of the European Society for Artificial Organs, Wien, Austria. http://hdl.handle.net/20.500.12708/100588 ( reposiTUm)

Harsfalvi, Z., Jordan, C., Haddadi, B., & Harasek, M. (2017). Heat transfer in stirred reactors (using Non‐Newtonian Medium). PFAU 14 - OpenFOAM#^{®} User Meeting, Graz, Austria. http://hdl.handle.net/20.500.12708/100603 ( reposiTUm)

Jordan, C., & Harasek, M. (2017). Einsatz von CFD zur Verfahrensoptimierung. 9. Österreichisches IEA Wirbelschichttreffen, Bad Blumau, Austria. http://hdl.handle.net/20.500.12708/100606 ( reposiTUm)

Bösenhofer, M., Jordan, C., & Harasek, M. (2017). Multi-phase Reacting Flows in OpenFOAM®. PFAU 14 - OpenFOAM#^{®} User Meeting, Graz, Austria. http://hdl.handle.net/20.500.12708/100602 ( reposiTUm)

Jordan, C., Haddadi, B., & Harasek, M. (2017). Sensor positions killing your plant performance? EuroPACT 2017 - 4#^{th} European Conference on Process Analytics and Control Technology, Potsdam, Germany. http://hdl.handle.net/20.500.12708/100617 ( reposiTUm)

Harsfalvi, Z., Jordan, C., Haddadi, B., & Harasek, M. (2017). Computational Fluid Dynamic Analysis of Cooling in a Mixed Vessel using a Non-Newtonian Medium. PRES’17, Tianjin, China. http://hdl.handle.net/20.500.12708/100584 ( reposiTUm)

Haddadi, B., Jordan, C., Norouzi, H. R., & Harasek, M. (2016). Investigation of the Pressure Drop of Random Packed Bed Adsorbers. PRES 2016, Prag, Czechia. http://hdl.handle.net/20.500.12708/100081 ( reposiTUm)

Jordan, C., & Harasek, M. (2016). Optimierung eines biomassebefeuerten Stirling-Motors. ProcessNet-Jahrestagung und 32. DECHEMA-Jahrestagung der Biotechnologen 2016, Aachen, Germany. http://hdl.handle.net/20.500.12708/100079 ( reposiTUm)

Harasek, M., Haddadi, B., Miltner, M., Schretter, P., & Jordan, C. (2016). Fully Resolved CFD Simulation of a Hollow Fibre Membrane Module. PRES 2016, Prag, Czechia. http://hdl.handle.net/20.500.12708/100082 ( reposiTUm)

Haddadi, B., Jordan, C., & Harasek, M. (2015). MP2 - WP5 New tools for 3D multi-phase process flows. PAC-School #5 Neue Technologien und Methoden in imPACts, Linz, Austria. http://hdl.handle.net/20.500.12708/99798 ( reposiTUm)

Haddadi, B., Jordan, C., & Harasek, M. (2015). Numerische Simulation des Konzentrationsund Strömungsprofiles in einem Festbettadsorber. Jahrestreffens der ProcessNet Fachgemeinschaft Fluiddynamik, Bamberg, Germany. http://hdl.handle.net/20.500.12708/99753 ( reposiTUm)

Jordan, C., & Harasek, M. (2015). Optimale Lamellenfläche eines Radialwärmetauschers für einen biomassebefeuerten Stirling-Motor. Jahrestreffens der ProcessNet Fachgemeinschaft Fluiddynamik, Bamberg, Germany. http://hdl.handle.net/20.500.12708/99752 ( reposiTUm)

Haddadi, B., Jordan, C., Martinetz, M., & Harasek, M. (2014). Multi-Region Simulation of Adsorption Phenomena. PFAU 9.0 - OpenFOAM® user meeting Austria, Linz, Austria. http://hdl.handle.net/20.500.12708/99330 ( reposiTUm)

Jordan, C., Fellner, T., & Aumeyr, C. (2014). Systematische Materialforschung für thermochemische Energiespeicher- SolidHeat Basic. ProcessNet-Jahrestagung und 31. DECHEMA-Jahrestagung der Biotechnologen 2014, Aachen, Germany. http://hdl.handle.net/20.500.12708/99436 ( reposiTUm)

Jordan, C., Maier, C., Harsfalvi, Z., Kiss, B., & Harasek, M. (2014). Optical and numerical analysis of droplet breakup. PRES 2014 - 17#^{th} Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, Prag, Czechia. http://hdl.handle.net/20.500.12708/99421 ( reposiTUm)

Miltner, M., Jordan, C., & Harasek, M. (2014). On the Applicability of RANS-Turbulence Models in CFD Simulations for the Description of Turbulent Free Jets During Biomass Combustion. PRES 2014 - 17#^{th} Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, Prag, Czechia. http://hdl.handle.net/20.500.12708/99405 ( reposiTUm)

Maier, C., Jordan, C., Harasek, M., Feilmayr, C., & Thaler, C. (2013). Investigation of Alternative Reducing Agent Injection into the Raceway of Blast Furnaces using CFD. PRES 13 - 16#^{th} Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, Rhodos, Greece. http://hdl.handle.net/20.500.12708/99123 ( reposiTUm)

Horvath, A., & Jordan, C. (2012). ofgpu-0.2 : Building, Benchmark, Comparison. PFAU 5.0 Austrian User Meeting, Linz, Austria. http://hdl.handle.net/20.500.12708/98920 ( reposiTUm)

Nagy, J., Jordan, C., & Harasek, M. (2012). Numerical and Experimental Investigation of the Role of Asymmetric Gas Flow in the Breakup of Liquid Droplets. PFAU 5.0 Austrian User Meeting, Linz, Austria. http://hdl.handle.net/20.500.12708/98922 ( reposiTUm)

Maier, C., Jordan, C., Harasek, M., Feilmayr, C., & Thaler, C. (2012). Implementation and Validation of a Three-Dimensional Multiphase-CFD-Model for Blast Furnace Processes. PRES 2012 - 15th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, Prag, Czechia. http://hdl.handle.net/20.500.12708/99010 ( reposiTUm)

Jordan, C., Harasek, M., Maier, C., Feilmayr, C., & Schuster, S. (2011). Injection of heavy fuel oil and other auxiliary reduction agents into a blast furnace raceway. 8#^{th} European Congress of Chemical Engineering, Berlin, Deutschland, EU. http://hdl.handle.net/20.500.12708/98668 ( reposiTUm)

Faschingleitner, J., Höflinger, W., Harasek, M., Jordan, C., Gospodarek, J., Purgar, A., Wolfslehner, J., & Leibrecht, K. (2010). Berechnungsmethoden zum Abscheiden von Staubwolken. 6.Minisymposium Verfahrenstechnik, IFA Tulln, Austria. http://hdl.handle.net/20.500.12708/98294 ( reposiTUm)

Schuster, S., Harasek, M., & Jordan, C. (2009). Kunststoffeindüsung im Hochofenprozess - Simulation unterschiedlicher Betriebszuständen mittels mehrskaligem CFD-Modell. K1-MET -Scientific Exchange Day 2009, Leoben, Austria. http://hdl.handle.net/20.500.12708/98213 ( reposiTUm)

Harasek, M., Jordan, C., Maier, C., Winter, F., Aichinger, G., Feilmayr, C., & Schuster, S. (2008). Strömungssimulation der Injektion von Kunststoff-Partikeln in eine Hochofen-Raceway. Process-Net Fachausschußsitzung CFD, Würzburg,Deutschland, EU. http://hdl.handle.net/20.500.12708/97810 ( reposiTUm)

Harasek, M., Jordan, C., Maier, C., & Winter, F. (2008). Evaluation of the High Temperature Conversion of Plastic Particles after Injection into Blast Furnace Raceway Using CFD Simulations. Austrian-Croatian-Hungarian Combustion Meeting ACH2008, Sopron, EU. http://hdl.handle.net/20.500.12708/97862 ( reposiTUm)

Abermann, S., Jordan, C., Harasek, M., & Bertagnolli, E. (2005). Processing and simulation of few nm thick high-k dielectric films. International Conference on Micro- and Nano-Engineering, Wien, Österreich, Austria. http://hdl.handle.net/20.500.12708/88355 ( reposiTUm)

Harasek, M., Schausberger, P., Jordan, C., & Winter, F. (2001). Exit Geometry Effects on the Fluidization on Fine Particles in a CFB Reactor: Analysis by Semi -Theoretical and CFD Modeling. 3#^{rd} European Conference on Chemical Engineering 2001, Nürnberg, Germany, Austria. http://hdl.handle.net/20.500.12708/96415 ( reposiTUm)

Harasek, M., Paul, G., Jordan, C., & Friedl, A. (2001). CFD-Simulation of Preparative Cromatic Columns: Effect of the Distributer and the Column Design on the Separation Performance. 3#^{rd} European Conference on Chemical Engineering 2001, Nürnberg, Germany, Austria. http://hdl.handle.net/20.500.12708/96432 ( reposiTUm)

Berichte

Jordan, C., Aziaba, K., Teufner-Kabas, M., Kabas, F., Greilinger, G., & Allgäuer, G. (2021). 2. Fortschrittbericht des Projektes DeCO2 - Diethylcarbonat aus CO2 und Ethanol (Zwischenbericht) (No. 2761267). http://hdl.handle.net/20.500.12708/40387 ( reposiTUm)

Jordan, C., Aziaba, K., Teufner-Kabas, M., Kabas, F., Greilinger, G., & Allgäuer, G. (2021). 3. Fortschrittbericht des Projektes DeCO2 - Diethylcarbonat aus CO2 und Ethanol (Zwischenbericht). http://hdl.handle.net/20.500.12708/40389 ( reposiTUm)

Jonach, T., Haddadi, B., & Jordan, C. (2021). Evaporation and fluid transport in porous media. http://hdl.handle.net/20.500.12708/40382 ( reposiTUm)

Tomasich, J., Tomasetig, D., Greilinger, G., Serna-Loaiza, S., Jordan, C., & Friedl, A. (2021). Wissenschaftliche Begleitung und Unterstützung bei der Erarbeitung eines Analytik Konzeptes für den Einsatz im Umfeld der mobilen Extraktionsanlage (TU-ThVT 1662-2021002). http://hdl.handle.net/20.500.12708/40464 ( reposiTUm)

Haddadi, B., Jordan, C., & Harasek, M. (2020). Roots-Final-report. http://hdl.handle.net/20.500.12708/40214 ( reposiTUm)

Puskas, S., Jordan, C., Pichler, M., Wesenauer, F., Streibl, B., Winter, F., & Harasek, M. (2020). Zwischenbericht 1 Projekt TOREtech (1/2019). http://hdl.handle.net/20.500.12708/40172 ( reposiTUm)

Pichler, M., Haddadi, B., Jordan, C., Wesenauer, F., Winter, F., & Harasek, M. (2020). Phase III: CFD Simulation Kalzinator. http://hdl.handle.net/20.500.12708/40171 ( reposiTUm)

Puskas, S., Jordan, C., Pichler, M., Wesenauer, F., Streibl, B., Winter, F., & Harasek, M. (2020). Zwischenbericht 2 Projekt TOREtech (2/2020). http://hdl.handle.net/20.500.12708/40173 ( reposiTUm)

Jordan, C., Setoodeh Jahromy, S., Azam, M., Harasek, M., Winter, F., Vogtenhuber, H., Birkelbach, F., & Werner, A. (2020). Waste2Storage - Potenzial der Flugasche als thermochemischer Energie- & CO2 Speicher. http://hdl.handle.net/20.500.12708/40223 ( reposiTUm)

Haddadi, B., Jordan, C., Wedl, G., Harasek, M., Gasser, C., & Lendl, B. (2020). Endbericht Projekt “LaserEye.” http://hdl.handle.net/20.500.12708/40224 ( reposiTUm)

Harasek, M., Jordan, C., Haddadi, B., & Weiß, B. (2020). PTLiquid Status Report Work package 4. http://hdl.handle.net/20.500.12708/40264 ( reposiTUm)

Haddadi, B., Jordan, C., & Harasek, M. (2018). Ammonia Distribution in Activated Carbon Packed Bed, Final report (TU-ThVT 1662-2018008). http://hdl.handle.net/20.500.12708/39623 ( reposiTUm)

Haddadi, B., Jordan, C., Harsfalvi, Z., & Harasek, M. (2018). CFD Simulation of Agitator Vessel, Project report (TU-ThVT 1662-2018009). http://hdl.handle.net/20.500.12708/39624 ( reposiTUm)

Mach, T., Stuhlbacher, A., Harasek, M., Spitzer, S., Jordan, C., Rupprich, M., Koch, M., Kreuzinger, N., Haslinger, J., Reif, D., Spitzer, H., & Plank, M. (2018). Kurzbericht Pharmaqua. http://hdl.handle.net/20.500.12708/39636 ( reposiTUm)

Mach, T., Stuhlbacher, A., Harasek, M., Spitzer, S., Jordan, C., Rupprich, M., Koch, M., Kreuzinger, N., Haslinger, J., Reif, D., Spitzer, H., & Plank, M. (2018). Endbericht Pharmaqua. http://hdl.handle.net/20.500.12708/39630 ( reposiTUm)

Haddadi, B., Jordan, C., & Harasek, M. (2018). CFD Simulation of Reacting Gas Flow in Packed Beds, Final report (TU-ThVT 1662-2018007). http://hdl.handle.net/20.500.12708/39622 ( reposiTUm)

Harsfalvi, Z., Jordan, C., & Harasek, M. (2018). Summary of the transfer simulation results Gleisdorf - Mitry - China, Final Report (TU-ThVT 1662-2018005). http://hdl.handle.net/20.500.12708/39620 ( reposiTUm)

Haddadi, B., Jordan, C., & Harasek, M. (2018). CFD Simulation of Particle Separator, Final Report (TU-ThVT 1662-2018006). http://hdl.handle.net/20.500.12708/39621 ( reposiTUm)

Tjaden, S., Bösenhofer, M., Jordan, C., & Harasek, M. (2018). K1MET 2015-2019 Project 1.2 Milestone report “Comparison of Blast Furnace Operation with PC Injection” (TU-ThVT 1662-2018010). http://hdl.handle.net/20.500.12708/39625 ( reposiTUm)

Harasek, M., Haddadi, B., & Jordan, C. (2017). CFD contributions to hybrid modelling. http://hdl.handle.net/20.500.12708/39257 ( reposiTUm)

Spitzer, S., Jordan, C., Haddadi, B., & Harasek, M. (2017). Zwischenbericht zum Projekt “Pharmaqua” (TU-ThVT 1662-2017013). http://hdl.handle.net/20.500.12708/39292 ( reposiTUm)

Haddadi, B., Jordan, C., & Harasek, M. (2017). Rheological Behavior of Non-Newtonian Fluids during Pumping. http://hdl.handle.net/20.500.12708/39402 ( reposiTUm)

Haddadi, B., Jordan, C., & Harasek, M. (2017). CFD Simulation of Gas Flow In Packed Beds - Metadynea. http://hdl.handle.net/20.500.12708/39401 ( reposiTUm)

Bösenhofer, M., Jordan, C., Harasek, M., Walk, A., & Tjaden, S. (2017). Comparison of Methods for the Evaluation of PCI Coals for Blast Furnace Injection (Milestone report). http://hdl.handle.net/20.500.12708/39400 ( reposiTUm)

Jordan, C., Haddadi, B., & Harasek, M. (2016). CFD Simulation of Gas Flow in Packed Beds (Endbericht) (TU & #8208;ThVT 1662 & #8208;2016 & #8208;001). http://hdl.handle.net/20.500.12708/38777 ( reposiTUm)

Harasek, M., & Jordan, C. (2016). StirBio: Entwicklung einer Versuchsfeuerung mit optimierten Wärmetauscher zur Integration eines Stirling-Motors (TU-ThVT 1662-2016-014). http://hdl.handle.net/20.500.12708/39055 ( reposiTUm)

Jordan, C., & Harasek, M. (2016). TGA-Untersuchung von beladenen Aktivkohlepellets (März 2016) (TU-ThVT 1662-2016002). http://hdl.handle.net/20.500.12708/39050 ( reposiTUm)

Jordan, C., & Harasek, M. (2016). TGA-Untersuchung von beladenen Aktivkohlepellets (April 2016) (TU-ThVT 1662-2016004). http://hdl.handle.net/20.500.12708/39051 ( reposiTUm)

Maier, C., Jordan, C., & Harasek, M. (2015). New challenges for reducing agents in smelting reduction processes (K1-MET Endbericht) (TU-ThVT 1662-2015004). http://hdl.handle.net/20.500.12708/38488 ( reposiTUm)

Jordan, C., Haddadi, B., & Harasek, M. (2015). CFD Simulation of Gas Flow in Packed Beds (TU-ThVT 1662-2015005). http://hdl.handle.net/20.500.12708/38497 ( reposiTUm)

Jordan, C. (2015). Dynamisches Temperaturverhalten eines gasdurchströmten porösen Mediums in einem doppelwandigem Rohr bei Änderung der Zulauftemperatur des Mantelfluides (Labor-Adsorber) (TU-ThVT 1662-2015001). http://hdl.handle.net/20.500.12708/38712 ( reposiTUm)

Jordan, C. (2015). Messung der Kondensationsrate auf einer ebenen Platte zur Validierung eines CFD-Solvers (TU-ThVT 1662-2015003). http://hdl.handle.net/20.500.12708/38738 ( reposiTUm)

Harasek, M., Maier, C., & Jordan, C. (2015). K1-MET - Competence Center for Excellent Technologies in Advanced Metallurgical and Environmental Process Development (TU-ThVT-1662-2015006). http://hdl.handle.net/20.500.12708/39054 ( reposiTUm)

Konlechner, D., El-Gohary-Ahmed, A., Jordan, C., & Harasek, M. (2013). Trocknung von Heu bei reduziertem Druck (TU-ThVT 1662-2013012). http://hdl.handle.net/20.500.12708/37942 ( reposiTUm)

Jordan, C., Maier, C., & Harasek, M. (2013). CFD Simulation of a Multiphase Transfer Line (OMV/Petrom Petrobrazi) (TU-ThVT 1662-2013010). http://hdl.handle.net/20.500.12708/37943 ( reposiTUm)

Harasek, M., El-Gohary-Ahmed, A., Jordan, C., & Horvath, A. (2011). Untersuchung von Bitumenproben hinsichtlich ihres Brandverhaltens. http://hdl.handle.net/20.500.12708/37171 ( reposiTUm)

Jordan, C., Maier, C., & Harasek, M. (2011). Flexible injection of alternative carbon material into the blast furnace - Work Package 4 / Task 4.2 “Adaption of raceway models for ACM and mixtures of them.” http://hdl.handle.net/20.500.12708/37209 ( reposiTUm)

Pohn, S., Jordan, C., Maier, C., & Harasek, M. (2010). Simulation des Verteilerringes einer Fallfilmströmung (TU-ThVT 1662-2010010). http://hdl.handle.net/20.500.12708/36715 ( reposiTUm)

Harasek, M., Horvath, A., Jordan, C., El-Gohary-Ahmed, A., & Nagy, J. (2010). Efficient Dry and Burn - Zwischenbericht November 2010 (TU-ThVT 1662-2010016). http://hdl.handle.net/20.500.12708/36561 ( reposiTUm)

Harasek, M., Horvath, A., Jordan, C., El-Gohary-Ahmed, A., & Nagy, J. (2010). Efficient Dry and Burn - Zwischenbericht Juli 2010 (TU-ThVT 1662-2010015). http://hdl.handle.net/20.500.12708/36560 ( reposiTUm)

Jordan, C., Maier, C., Zauner, F., Kaltenbacher, F., El-Gohary-Ahmed, A., & Harasek, M. (2009). New Callenges for reducing agents in smelting reduction processes Reductants from secondary sources. http://hdl.handle.net/20.500.12708/35981 ( reposiTUm)

Maier, C., Jordan, C., & Harasek, M. (2009). Strömungssimulation Heißgaskanal WS04. http://hdl.handle.net/20.500.12708/35626 ( reposiTUm)

Horvath, A., Jordan, C., & Harasek, M. (2009). Versuchsbericht - Untersuchung des Einflusses einer Löschmittelflutung auf Serverfestplatten. http://hdl.handle.net/20.500.12708/35770 ( reposiTUm)

Jordan, C., Maier, C., Polster, R., Harasek, M., & Winter, F. (2008). Die Bildung von H2 und CO durch Eindüsung von gasförmigen , flüssigen und festen Einsatzstoffen in den Hochofen ( Endbericht Modul 4 ). http://hdl.handle.net/20.500.12708/35070 ( reposiTUm)

Harasek, M., Maier, C., & Jordan, C. (2008). CFD- Tankflussmodellierung. http://hdl.handle.net/20.500.12708/32778 ( reposiTUm)

Jordan, C., Miltner, M., Makaruk, A., Schlager, R. R., & Harasek, M. (2007). Durchführung von Korrosionsversuchen nach ÖNORM EN 12094 , September 2007. http://hdl.handle.net/20.500.12708/32700 ( reposiTUm)

Jordan, C., Miltner, M., Makaruk, A., Schlager, R. R., & Harasek, M. (2007). Durchführung von Korrosionsversuchen nach ÖNORM EN 12094, Oktober 2007. http://hdl.handle.net/20.500.12708/32701 ( reposiTUm)

Jordan, C., & Harasek, M. (2007). CFD-Modell Kessel/Umlenkung Göpfritz Modifikation Zuleitung. http://hdl.handle.net/20.500.12708/32699 ( reposiTUm)

Jordan, C., Maier, C., Harasek, M., & Winter, F. (2007). Die Bildung von H2 und CO durch Eindüsung von gasförmigen, flüssigen und festen Einsatzstoffen in den Hochofen. http://hdl.handle.net/20.500.12708/32696 ( reposiTUm)

Jordan, C., & Harasek, M. (2007). CFD-Modell Kugelmühle (Labor-und Produktionsanlage). http://hdl.handle.net/20.500.12708/32698 ( reposiTUm)

Jordan, C., & Harasek, M. (2007). CFD-Modell Biomassefeuerung Hirschhofer. http://hdl.handle.net/20.500.12708/32697 ( reposiTUm)

Horvath, A., Jordan, C., & Harasek, M. (2007). Srömungssimulation von Rührern in Biogasfermentern. http://hdl.handle.net/20.500.12708/32637 ( reposiTUm)

Maier, C., Jordan, C., & Harasek, M. (2007). Abschlussbericht: Strömungssimulation Wirbelschichtkessel. http://hdl.handle.net/20.500.12708/32644 ( reposiTUm)

Lukasser, M., Horvath, A., Jordan, C., & Harasek, M. (2007). CFD Simulations of Industrial Bubble Flows using the Euler-Euler Model. http://hdl.handle.net/20.500.12708/32679 ( reposiTUm)

Horvath, A., Jordan, C., & Harasek, M. (2006). Comparison of a Commercial and an Open Source CFD Software Package. http://hdl.handle.net/20.500.12708/32586 ( reposiTUm)

Harasek, M., Horvath, A., & Jordan, C. (2006). CFD-Simulationen. http://hdl.handle.net/20.500.12708/32590 ( reposiTUm)

Harasek, M., Horvath, A., & Jordan, C. (2006). Strömungssimulation für AFK. http://hdl.handle.net/20.500.12708/32589 ( reposiTUm)

Horvath, A., & Jordan, C. (2006). CFD-Berechnung für Rührwerke von Biogasfermentern. http://hdl.handle.net/20.500.12708/32588 ( reposiTUm)

Jordan, C., Maier, C., Horvath, A., Lukasser, M., & Schmied, C. (2006). CFD-Simulation von Blasensäulen. http://hdl.handle.net/20.500.12708/32593 ( reposiTUm)

Maier, C., Jordan, C., & Harasek, M. (2006). Strömungssimulation Wirbelschichtkessel Timelkam. http://hdl.handle.net/20.500.12708/32583 ( reposiTUm)

Maier, C., Jordan, C., & Harasek, M. (2006). Strömungssimulation Wirbelschichtkessel Söderhamn. http://hdl.handle.net/20.500.12708/32628 ( reposiTUm)

Miltner, M., Jordan, C., Potetz, A., & Harasek, M. (2005). Experimentelle und numerische Untersuchungen an turbulenten und drallbehafteten Freistrahlen. http://hdl.handle.net/20.500.12708/32446 ( reposiTUm)

Jordan, C., & Harasek, M. (2005). Optimierung eines CVD-Reaktors. http://hdl.handle.net/20.500.12708/32460 ( reposiTUm)

Horvath, A., Jordan, C., & Harasek, M. (2005). Control of Emission of Reactive Gas from a Paper Laminating Machine by Use of CFD. http://hdl.handle.net/20.500.12708/32516 ( reposiTUm)

Maier, C., Jordan, C., Friedl, A., Varmuza, K., & Harasek, M. (2005). Optimierung von Drallabscheidern mittels Strömungssimulation. http://hdl.handle.net/20.500.12708/32443 ( reposiTUm)

Pazos Costa, A., Jordan, C., Friedl, A., & Harasek, M. (2005). Modeling of Hollow Fiber Transverse Flow Modules using CFD. http://hdl.handle.net/20.500.12708/32444 ( reposiTUm)

Jordan, C., Maier, C., & Harasek, M. (2005). CFD-Simulation stationäre Wirbelschichtfeuerung. http://hdl.handle.net/20.500.12708/32440 ( reposiTUm)

Harasek, M., Horvath, A., & Jordan, C. (2005). CFD-Simulation Laminator 3. http://hdl.handle.net/20.500.12708/32442 ( reposiTUm)

Harasek, M., Horvath, A., & Jordan, C. (2005). Strömungssimulation für AFK. http://hdl.handle.net/20.500.12708/32441 ( reposiTUm)

Jordan, C., & Harasek, M. (2005). CFD-Simulation eines CVD-Reaktors. http://hdl.handle.net/20.500.12708/32438 ( reposiTUm)

Jordan, C. (2005). CFD-Modell einer Kugelmühle. http://hdl.handle.net/20.500.12708/32439 ( reposiTUm)

Miltner, M., Jordan, C., & Harasek, M. (2005). CFD-simulation for the development of an innovative baled biomass-fired combustion chamber. http://hdl.handle.net/20.500.12708/32464 ( reposiTUm)

Jordan, C., Miltner, M., & Harasek, M. (2004). Vergleich von Turbulenzmodellen bei der Simulation von Freistrahlen mittels CFD. http://hdl.handle.net/20.500.12708/32240 ( reposiTUm)

Harasek, M., & Jordan, C. (2004). Simulation des Gasaustausches in einem Kugelgasbehälter. http://hdl.handle.net/20.500.12708/32390 ( reposiTUm)

Wukovits, W., Jordan, C., & Harasek, M. (2004). REC-TAR - Recycling of Asphalt Containing Tar from Road and Highway Construction by Using Environmentally Friendly Methods. http://hdl.handle.net/20.500.12708/32527 ( reposiTUm)

Harasek, M., Horvath, A., & Jordan, C. (2004). Investigation of dependence of gas flow on the geometry of cyclonic separators by CFD simulation. http://hdl.handle.net/20.500.12708/32515 ( reposiTUm)

Harasek, M., Jordan, C., & Friedl, A. (2004). Simulation der Ozonbegasung in einem Karton-Laminator. http://hdl.handle.net/20.500.12708/32392 ( reposiTUm)

Harasek, M., Horvath, A., & Jordan, C. (2004). Geometrieimplementierung für CFD-Simulation. http://hdl.handle.net/20.500.12708/32393 ( reposiTUm)

Harasek, M., Horvath, A., & Jordan, C. (2004). Strömungssimulation Laminator (2). http://hdl.handle.net/20.500.12708/32395 ( reposiTUm)

Harasek, M., Horvath, A., & Jordan, C. (2004). Strömungssimulation Laminator (1). http://hdl.handle.net/20.500.12708/32394 ( reposiTUm)

Friedl, A., Harasek, M., Beckmann, G., Kerschbaum, A., Pfeffer, M., Jordan, C., & Miltner, M. (2004). NESSIE - New Small Scale Innovative Energy Biomass Combustor, Full-year report 2003. http://hdl.handle.net/20.500.12708/32502 ( reposiTUm)

Wukovits, W., Jordan, C., & Harasek, M. (2004). Recycling of Asphalt Containing Tar from Road and Highway Construction by Using Environmentally Friendly Methods. http://hdl.handle.net/20.500.12708/32517 ( reposiTUm)

Harasek, M., & Jordan, C. (2004). Strömungssimulation Gaswäscher/Tropfenabscheider Modifikation Einlaufquerschnitt. http://hdl.handle.net/20.500.12708/32521 ( reposiTUm)

Harasek, M., & Jordan, C. (2004). Strömungssimulation Gaswäscher/Tropfenabscheider Geometrie-Optimierung. http://hdl.handle.net/20.500.12708/32523 ( reposiTUm)

Harasek, M., & Jordan, C. (2004). Strömungssimulation Gaswäscher/Tropfenabscheider Geometrie-Optimierung. http://hdl.handle.net/20.500.12708/32525 ( reposiTUm)

Harasek, M., & Jordan, C. (2004). Strömungssimulation Gaswäscher/Tropfenabscheider. http://hdl.handle.net/20.500.12708/32520 ( reposiTUm)

Harasek, M., & Jordan, C. (2004). Strömungssimulation Verdampferrohrbündel MED (Projekt Oswal). http://hdl.handle.net/20.500.12708/32522 ( reposiTUm)

Harasek, M., & Jordan, C. (2004). Strömungssimulation Verdampferrohrbündel MED (Projekt Oswal). http://hdl.handle.net/20.500.12708/32524 ( reposiTUm)

Harasek, M., & Jordan, C. (2004). Strömungssimulation Pulsationsdämpfer. http://hdl.handle.net/20.500.12708/32518 ( reposiTUm)

Harasek, M., & Jordan, C. (2004). Strömungssimulation Pulsationsdämpfer. http://hdl.handle.net/20.500.12708/32519 ( reposiTUm)

Wukovits, W., Jordan, C., & Harasek, M. (2003). Scientific Progress Report: REC-TAR, Recycling of Asphalt Containing Tar from Road and Highway Construction by Using Environmentally Friendly Methods. http://hdl.handle.net/20.500.12708/32231 ( reposiTUm)

Friedl, A., Harasek, M., Beckmann, G., Kerschbaum, A., Pfeffer, M., Jordan, C., & Miltner, M. (2003). NESSIE - New Small Scale Innovative Energy Biomass Combustor, Half-year report 2003. http://hdl.handle.net/20.500.12708/32230 ( reposiTUm)

Jordan, C., Horvath, A., Friedl, A., & Harasek, M. (2003). Behandlung von Zyklonströmungen mittels CFD. http://hdl.handle.net/20.500.12708/32239 ( reposiTUm)

Harasek, M., & Jordan, C. (2003). NESSIE - Strömungssimulation Biomasseverbrennung Kurzbericht 02/03. http://hdl.handle.net/20.500.12708/32238 ( reposiTUm)

Harasek, M., & Jordan, C. (2003). Strömungssimulation Wärmetauschereintritt, Geometriemodifikation 2. http://hdl.handle.net/20.500.12708/32237 ( reposiTUm)

Harasek, M., & Jordan, C. (2003). Strömungssimulation Wärmetauschereintritt, Geometriemodifikation 1. http://hdl.handle.net/20.500.12708/32236 ( reposiTUm)

Wukovits, W., Jordan, C., & Harasek, M. (2003). Work Report: REC-TAR, Recycling of Asphalt Containing Tar from Road and Highway Construction by Using Environmentally Friendly Methods. http://hdl.handle.net/20.500.12708/32232 ( reposiTUm)

Harasek, M., & Jordan, C. (2003). Strömungssimulation Kugeltank - Endbericht Oktober 2003. http://hdl.handle.net/20.500.12708/32234 ( reposiTUm)

Harasek, M., & Jordan, C. (2003). Strömungssimulation Wärmetauschereintritt. http://hdl.handle.net/20.500.12708/32235 ( reposiTUm)

Preprints

Spitz, S., Bolognin, S., Brandauer, K., Füßl, J., Schuller, P., Schobesberger, S., Jordan, C., Schädl, B., Grillari, J., Wanzenboeck, H. D., Mayr, T., Harasek, M., Schwamborn, J. C., & Ertl, P. (2022). Development of a multi-sensor integrated midbrain organoid-on-a-chip platform for studying Parkinson’s disease. bioRxiv. https://doi.org/10.1101/2022.08.19.504522 ( reposiTUm)

Bachmann, B., Spitz, S., Jordan, C., Schuller, P., Wanzenböck, H. D., Haddadi, B., Harasek, M., Redl, H., Holnthoner, W., & Ertl, P. (2021). Microvasculature-on-a-Chip: Bridging the interstitial blood-lymph interface via mechanobiological stimuli (p. 28). bioRxiv. https://doi.org/10.1101/2021.04.08.438936 ( reposiTUm)

Spitz, S., Zanetti, C., Bolognin, S., Muwanigwa, M. N., Smits, L., Berger, E., Jordan, C., Harasek, M., Schwamborn, J. C., & Ertl, P. (2019). Cultivation and characterization of human midbrain organoids in sensor integrated microfluidic chips (p. 15). bioRxiv. https://doi.org/10.1101/869701 ( reposiTUm)

Hochschulschriften

Jordan, C. (2019). Numerische Untersuchung von reaktiven Strömungen bei erhöhten Temperaturen [Dissertation, Technische Universität Wien]. reposiTUm. http://hdl.handle.net/20.500.12708/79418 ( reposiTUm)

Jordan, C. (2000). Fluiddynamische Aspekte eines Flugstromreaktors [Diploma Thesis, Technische Universität Wien]. reposiTUm. http://hdl.handle.net/20.500.12708/179606 ( reposiTUm)