Klein, M., Staufer, E., Zhang, D., Edtmaier, C., Horky, J., Schmitz-Niederau, M., Qiu, D., Easton, M., & Klein, T. (2025). Phase Evolution and Mechanical Behavior of a Novel Ti–6.3Cu–2.2Fe−2.1Al Alloy Processed by Wire-Arc Directed Energy Deposition. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE. https://doi.org/10.1007/s11661-025-07766-9 ( reposiTUm)

Klein, M., Staufer, E., Edtmaier, C., Horky, J., Schmitz-Niederau, M., Zhang, D., Qiu, D., Easton, M., & Klein, T. (2024). Effects of Heat Treatment and Processing Conditions on the Microstructure and Mechanical Properties of a Novel Ti–6.3Cu–2.2Fe–2.1Al Alloy. Advanced Engineering Materials, Article 2400534. https://doi.org/10.1002/adem.202400534 ( reposiTUm)

Moser, N., Staufer, E., Klein, T., Horky, J., Schmitz-Niederau, M., Neubauer, E., Trunova, L., & Edtmaier, C. (2024). Preparation and characterisation of Ti‐6‐4 and Ti‐8‐1‐1 metal matrix composites with high specific stiffness using powder hot extrusion and arc‐remelting. Advanced Engineering Materials, Article 2400514. https://doi.org/10.1002/adem.202400514 ( reposiTUm)

Pfaffinger, V., Staufer, E., Edtmaier, C., Arnoldt, A., Schmitz-Niederau, M., Horky, J., & Klein, T. (2023). Insights into Phase Evolution and Mechanical Behavior of the Eutectoid Ti‐6.4(wt.%)Ni Alloy Modified with Fe and Cr. Advanced Engineering Materials, Article 2300177. https://doi.org/10.34726/4243 ( reposiTUm)

Klein, T., Zhang, D., Staufer, E., Boll, T., Schneider-Broeskamp, C., Edtmaier, C., Schmitz-Niederau, M., Horky, J., Qiu, D., & Easton, M. (2023). Phase transformation pathways in a Ti-5.9Cu alloy modified with Fe and Al. Journal of Materials Research and Technology, 27, 4978–4985. https://doi.org/10.1016/j.jmrt.2023.11.014 ( reposiTUm)

Wolf, M., Edtmaier, C., & de Oro Calderon, R. (2022). Influence of carbon on the formation of γ/γ′ microstructure and κ-phase in the WC/Co–Ni–Al–W system: ab initio calculations and experimental studies. Journal of Materials Science, 57(28), 13779–13799. https://doi.org/10.1007/s10853-022-07493-1 ( reposiTUm)

Edtmaier, C. (2021). How to Master Interfaces in MMCs with Reactive Constituents. Materials Science Forum, 1016, 94–101. https://doi.org/10.4028/www.scientific.net/msf.1016.94 ( reposiTUm)

Edtmaier, C., Wolf, M., de Oro Calderon, R., & Schubert, W.-D. (2021). Effect of nickel on the formation of γ/γ’ microstructures in WC/Co-Ni-Al-W. International Journal of Refractory Metals and Hard Materials, 100(105652), 105652. https://doi.org/10.1016/j.ijrmhm.2021.105652 ( reposiTUm)

Gorji, M. R., Sanjabi, S., & Edtmaier, C. (2020). Combination of electrophoretic and electroless depositions to fabricate Ni/TiC cladding. Surface Engineering, 36(9), 929–935. https://doi.org/10.1080/02670844.2019.1653010 ( reposiTUm)

Edtmaier, C., Segl, J., Koos, R., Schöbel, M., & Feldbaumer, C. (2020). Characterization of interfacial bonding strength at Al(Si)/diamond interfaces by neutron diffraction: effect of diamond surface termination and processing conditions. Diamond and Related Materials, 106(107842), 107842. https://doi.org/10.1016/j.diamond.2020.107842 ( reposiTUm)

Gorji, M. R., Sanjabi, S., Edtmaier, C., & Katsich, C. (2019). Wear-resistant electrophoretic deposition (EPD) layer of titanium carbide. Journal of Alloys and Compounds, 806, 1323–1338. https://doi.org/10.1016/j.jallcom.2019.07.241 ( reposiTUm)

de Oro Calderon, R., Edtmaier, C., & Schubert, W.-D. (2019). Novel binders for WC-based cemented carbides with high Cr contents. International Journal of Refractory Metals and Hard Materials, 85(105063), 105063. https://doi.org/10.1016/j.ijrmhm.2019.105063 ( reposiTUm)

Edtmaier, C., Segl, J., Koos, R., Schöbel, M., & Feldbaumer, C. (2019). Effect of Processing Conditions on Bonding Strength at Al(Si)/Diamond Interfaces. Key Engineering Materials, 809, 115–120. https://doi.org/10.4028/www.scientific.net/kem.809.115 ( reposiTUm)

Edtmaier, C., Segl, J., Rosenberg, E., Liedl, G., Pospichal, R., & Steiger-Thirsfeld, A. (2018). Microstructural characterization and quantitative analysis of the interfacial carbides in Al(Si)/diamond composites. Journal of Materials Science. https://doi.org/10.1007/s10853-018-2734-1 ( reposiTUm)

Oddone, V., Segl, J., Prakasam, M., Hartmann, M. T., Silvain, J.-F., Edtmaier, C., & Reich, S. (2018). Isotropic thermal expansion in anisotropic thermal management composites filled with carbon fibres and graphite. Journal of Materials Science, 53(15), 10910–10919. https://doi.org/10.1007/s10853-018-2373-6 ( reposiTUm)

Greil, S., Edtmaier, C., Haubner, R., & Lauter, L. (2018). Metallographische Untersuchung an Feingold und einer Gold-Kupferlegierung für die Münzherstellung. Praktische Metallographie, 55(6), 360–369. https://doi.org/10.3139/147.110524 ( reposiTUm)

Greil, S., Edtmaier, C., Haubner, R., & Lauter, L. (2017). Metallographic Investigations of Silver Alloys Used for Minting. Materials Science Forum, 891, 89–94. https://doi.org/10.4028/www.scientific.net/msf.891.89 ( reposiTUm)

Gorji, M. R., Edtmaier, C., & Sanjabi, S. (2017). Synthesis of Ni/TiC composite coating by infiltration sintering of electrophoretic deposited layers. Materials & Design, 125, 167–179. https://doi.org/10.1016/j.matdes.2017.04.002 ( reposiTUm)

Rudianto, H., Edtmaier, C., Dlouhy, I., & Soukal, F. (2017). EFFECT OF ULTRASONICATION DISPERSION TECHNIQUE ON SINTERING PROPERTIES OF CNT  REINFORCED Al-Zn-Mg-Cu POWDER. ARCHIVES OF METALLURGY AND MATERIALS, 62(2), 1131–1135. https://doi.org/10.1515/amm-2017-0165 ( reposiTUm)

Edtmaier, C., Haubner, R., Zeiler, B., Danninger, H., & Ortner, H. (2017). Special Issue devoted to the 65th birthday of a.o.Univ. Prof. Dipl.-Ing. Dr.techn. Wolf-Dieter Schubert, Technische Universität Wien, Austria. International Journal of Refractory Metals and Hard Materials, 62, 85–86. https://doi.org/10.1016/j.ijrmhm.2016.07.018 ( reposiTUm)

Segl, J., Edtmaier, C., & Rosenberg, E.-E. (2016). Influenza dei parametri di processo sulla conducibilità termica in compositi a matrice metallica (MMC) Al-diamante. Diamante Applicazioni & Tecnologia, 87, 41–49. http://hdl.handle.net/20.500.12708/149986 ( reposiTUm)

Edtmaier, C., Bauer, E., Weber, L., Tako, Z. S., Segl, J., & Friedbacher, G. (2015). Temperature dependence of the thermal boundary conductance in Ag-3Si/diamond composites. Diamond and Related Materials, 57, 37–42. https://doi.org/10.1016/j.diamond.2015.01.010 ( reposiTUm)

Edtmaier, C., Bauer, E., Tako, Z. S., & Segl, J. (2015). Thermal Conductivity Behaviour of Al/Diamond and Ag/Diamond Composites in the Temperature Range 4 K #lt T #lt 293 K. Materials Science Forum, 825–826, 197–204. https://doi.org/10.4028/www.scientific.net/msf.825-826.197 ( reposiTUm)

Segl, J., & Edtmaier, C. (2015). Influence of the diamond surface termination on the thermal conductivity of Al/diamond and Ag/diamond MMCs. Materials Science Forum, 825–826, 142–149. https://doi.org/10.4028/www.scientific.net/msf.825-826.142 ( reposiTUm)

Edtmaier, C., & Requena, G. (2015). Preface. Materials Science Forum, 825–826(1), 1. http://hdl.handle.net/20.500.12708/151548 ( reposiTUm)

Edtmaier, C., Steck, T., Hula, R. C., Pambaguian, L., & Hepp, F. (2010). Thermo-physical properties and TEM analysis of silver based MMCs utilizing metallized multiwall-carbon nanotubes. Composites Science and Technology, 70, 783–788. http://hdl.handle.net/20.500.12708/166673 ( reposiTUm)

Edtmaier, C., & Hula, R. C. (2010). Thermo-physical properties of silver/carbon fibre composites. International Journal of Materials Research, 101(9), 1105–1112. http://hdl.handle.net/20.500.12708/166747 ( reposiTUm)

Hula, R. C., Edtmaier, C., Holzweber, M., Hutter, H., & Eisenmenger-Sittner, C. (2010). The wetting behaviour of silver on carbon, pure and carburized nickel, cobalt and molybdenum substrates. Applied Surface Science, 256(14), 4697–4701. http://hdl.handle.net/20.500.12708/166708 ( reposiTUm)

Edtmaier, C., & Keppert, T. (2010). About the effect of Carbon Nanotubes on the overall thermal conductivity in Cu-Ti/CNT composites. Powder Metall. Progress, 10(4), 198–206. http://hdl.handle.net/20.500.12708/168247 ( reposiTUm)

Schroeder, P., Kast, M., Halwax, E., Edtmaier, C., Bethge, O., & Brückl, H. (2009). Morphology alterations during postsynthesis oxidation of Zn nanowires. Journal of Applied Physics, 105, 104307-1-104307–5. http://hdl.handle.net/20.500.12708/165608 ( reposiTUm)

Tischner, A., Köck, A., Maier, T., Edtmaier, C., Gspan, C., & Kothleitner, G. (2009). Tin oxide nanocrystalline films and nanowires for gas sensing applications. Microelectronic Engineering, 86, 1258–1261. http://hdl.handle.net/20.500.12708/165325 ( reposiTUm)

Köck, A., Tischner, A., Maier, T., Kast, M., Edtmaier, C., Gspan, C., & Kothleitner, G. (2009). Atmospheric pressure fabrication of SnO2-nanowires for highly sensitive CO and CH4 detection. Sensors and Actuators B: Chemical, 138(1), 160–167. https://doi.org/10.1016/j.snb.2009.02.055 ( reposiTUm)

Edtmaier, C., Weber, L., & Tavangar, R. (2009). Surface Modification of Diamonds in Diamond/Al-Matrix Composite. Advanced Materials Research, 59, 125–130. http://hdl.handle.net/20.500.12708/165302 ( reposiTUm)

Edtmaier, C., Hula, R. C., Pintsuk, G., & Guarnone, P. (2009). Preparation of Functionally Graded W/Cu Interlayers and Brazing to CuCrZr and CFC for Actively Cooled Flat Tile Divertor Mock-Ups. Advanced Materials Research, 59, 185–191. http://hdl.handle.net/20.500.12708/165303 ( reposiTUm)

Edtmaier, C., Janhsen, T., Hula, R. C., Pambaguian, L., Wulz, H. G., Forero, S., & Hepp, F. (2009). Carbon Nanotubes as Highly Conductive Nano-Fillers in Metallic Matrices. Advanced Materials Research, 59, 131–137. http://hdl.handle.net/20.500.12708/165304 ( reposiTUm)

Hula, R. C., & Edtmaier, C. (2009). Silver coated tungsten carbide powders for composites in electrical contact applications. Powder Metallurgy Progress, 9(1), 34–41. http://hdl.handle.net/20.500.12708/165568 ( reposiTUm)

Köck, A., Tischner, A., Maier, T., Kast, M., Stepper, C., Januschewsky, J., & Edtmaier, C. (2008). Metalloxid-Nanostrukturen für die Gassensorik. LIFIS Online: Internet-Zeitschrift Des Leibniz-Instituts Für Interdisziplinäre Studien e.V., HTTP://WWW.LEIBNIZ-INSTITUT.DE/XCMS/PDF_PUB/KOECK_20_02_08.PDF, 13. http://hdl.handle.net/20.500.12708/169574 ( reposiTUm)

Poletti, C., Balog, M., Schubert, T., Liedtke, V., & Edtmaier, C. (2008). Production of titanium matrix composites reinforced with SiC particles. Composites Science and Technology, 68(9), 2171–2177. https://doi.org/10.1016/j.compscitech.2008.03.018 ( reposiTUm)

Besterci, M., Hvizdos, P., Sülleiova, K., & Edtmaier, C. (2007). Processing, microstructure and creep testing of Pt-Y2O3 composites. Materials & Design, 28, 2540–2543. http://hdl.handle.net/20.500.12708/169358 ( reposiTUm)

Köck, A., Tischner, A., Maier, T., Kast, M., Januschewsky, J., & Edtmaier, C. (2007). Metal Oxide Nanostructures for Gas Sensors. Micromaterials and Nanomaterials, 7, 74–75. http://hdl.handle.net/20.500.12708/169548 ( reposiTUm)

Hvizdos, P., Besterci, M., Slesar, M., & Edtmaier, C. (2005). Compressive creep testing of Pt-Y2O3 composites. High Temperature Materials and Processes, 24(3), 189–192. http://hdl.handle.net/20.500.12708/172901 ( reposiTUm)

Edtmaier, C., Schiesser, R., Meissl, C., Schubert, W.-D., Bock, A., Schön, A., & Zeiler, B. (2005). Selective removal of the cobalt binder in WC/Co based hardmetal scraps by acetic acid leaching. Hydrometallurgy, 76, 63–71. http://hdl.handle.net/20.500.12708/172815 ( reposiTUm)

Edtmaier, C., & Staufer, E. (2025). Effects of heat treatments on the microstructure, phase development and mechanical properties of PMD additively manufactured ternary and quaternary Ti-Cu-based alloys with Fe and Cr additions. In Thermec’2025 - International Conference on PROCESSING & MANUFACTURING OF ADVANCED MATERIALS - Processing, Properties, Fabrication and Applications - ABSTRACT BOOK (pp. 552–552). ( reposiTUm)

Zunghammer, A., Moser, N., Staufer, E., Edtmaier, C., Horky, J., Neubauer, E., Klein, T., Schneider-Broeskamp, C., Trunova, L., & Schmitz-Niederau, M. (2024). Titanium MMCs with enhanced specific Young’s modulus via powder hot extrusion. In M. Jackson (Ed.), Proceedings of the 15th World Conference on Titanium (pp. 29–34). http://hdl.handle.net/20.500.12708/203244 ( reposiTUm)

Staufer, E., Edtmaier, C., Ballok, E., Moser, N., Klein, T., Schneider-Bröskamp, C., Zhang, D., Easton, M., Qiu, D., Schmitz-Niederau, M., Trunova, L., & Horky, J. (2024). Effects on microstructure and mechanical properties of the addition of Co, Cr and Fe to the eutectoid system Ti-6.5Cu. In M. Jackson (Ed.), Proceedings of the 15th World Conference on Titanium (pp. 42–47). http://hdl.handle.net/20.500.12708/202819 ( reposiTUm)

Klein, T., Staufer, E., Boll, T., Arnoldt, A., Zhang, D., Schmitz-Niederau, M., Horky, J., Edtmaier, C., Schneider-Bröskamp, C., Qiu, D., & Easton, M. (2024). Effects of Fe and Al additions on the eutectoid transformation and its transformation products in Ti-5.9Cu (WT.%). In M. Jackson (Ed.), Proceedings of the 15th World Conference on Titanium (pp. 36–41). http://hdl.handle.net/20.500.12708/202818 ( reposiTUm)

Horky, J., Ariza-Galván, E., Zunghammer, A., Moser, N., Edtmaier, C., Klein, T., Schmitz-Niederau, M., & Neubauer, E. (2023). Assessment Of Plasma Metal Deposition (PMD) For The Manufacturing Of Titanium Based Metal Matrix Composites. In Euro PM2023 Proceedings. EURO PM2023, Lisbon, Portugal. EPMA. https://doi.org/10.59499/EP235765700 ( reposiTUm)

de Oro Calderon, R., Steinlechner, R., Lunzer, M., Wodak, I., Edtmaier, C., Linhardt, P., & Schubert, W.-D. (2022). Critical aspects for an efficient assessment of novel materials designs. In Proceedings of the 20th International Conference on Refractory Metals and Hard Materials (p. 15). http://hdl.handle.net/20.500.12708/50859 ( reposiTUm)

Edtmaier, C., Danninger, H., Halvaci, T., Weirather, T., & Granzer, T. (2022). Influence of heat treatment conditions on magnetic, thermal and electrical properties of tungsten heavy alloys. In Proceedings of the 20th International Conference on Refractory Metals and Hard Materials (p. 14). http://hdl.handle.net/20.500.12708/50858 ( reposiTUm)

Edtmaier, C., de Oro Calderon, R., Wolf, M., & Steinlechner, R. (2022). Evolution of a γ/γ′ microstructure and appearance of a κ-phase in the WC/Co-Ni-Al-W system as a function of carbon and nickel. In Proceedings of the 20th International Conference on Refractory Metals and Hard Materials (p. 10). http://hdl.handle.net/20.500.12708/49699 ( reposiTUm)

Haubner, R., Strobl, S., & Edtmaier, C. (2020). Ursachenermittlung für die Delamination von Messing/Nickel/Messing Verbundblechen. In A. Neidel (Ed.), Sonderbände der Praktischen Metallographie zur 54. Metallographie Tagung (pp. 171–176). http://hdl.handle.net/20.500.12708/49594 ( reposiTUm)

de Oro Calderon, R., Schwingenschlögl, M., Edtmaier, C., & Schubert, W.-D. (2019). Challenges in the use of high entropy alloys as alternative binders in cemented carbides. In Proceedings Euro PM2019 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/50569 ( reposiTUm)

de Oro Calderon, R., Schwingenschlögl, M., Mirwald, J., Edtmaier, C., & Schubert, W.-D. (2019). Novel binders for WC-based cemented carbides with high Cr contents. In 11th International Conference on the Science of Hard Materials ICSHM11 (pp. 125–126). CSHM. http://hdl.handle.net/20.500.12708/50408 ( reposiTUm)

Weissensteiner, C., Mühlbauer, G., Qvick, J., Schubert, W.-D., & Edtmaier, C. (2017). Zinc-reclaim of refractory materials: mechanisms and limitations. In Proceedings of the 19th Plansee Seminar (p. 12). Plansee Group, Reutte, Austria. http://hdl.handle.net/20.500.12708/49891 ( reposiTUm)

Greil, S., Edtmaier, C., Haubner, R., & Lauter, L. (2017). Metallographische Untersuchung an Feingold und einer Gold-Kupferlegierung für die Münzherstellung. In G. Petzow (Ed.), Sonderbände der Praktischen Metallographie zur 51. Metallographie Tagung (pp. 155–160). INVENTUM GmbH. http://hdl.handle.net/20.500.12708/49928 ( reposiTUm)

Segl, J., Edtmaier, C., Liedl, G., & Pospichal, R. (2017). Preparation of the diamond-metal interface in Al-diamond MMCs. In International Forum of Young Researchers: Topical Issues of Subsoil Usage (pp. 173–175). St. Petersburg Mining University. http://hdl.handle.net/20.500.12708/49789 ( reposiTUm)

Edtmaier, C., Bauer, E., Segl, J., Foelske-Schmitz, A., & Pambaguian, L. (2016). Thermophysical behavior of diamond composites for diode laser heat sink applications at temperatures between 4 K and ambient. In 46th International Conference on Environmental Systems (p. 14). International Conference on Environmental Systems, Inc. http://hdl.handle.net/20.500.12708/49234 ( reposiTUm)

Greil, S., Edtmaier, C., Haubner, R., & Lauter, L. (2016). Metallographic investigations of silver alloys used for mints. In M. Longauerova & M. Vojtko (Eds.), Abstract Booklet, Metallography´16 (p. 25). http://hdl.handle.net/20.500.12708/49267 ( reposiTUm)

Segl, J., Edtmaier, C., & Rosenberg, E.-E. (2016). Influence of processing parameters on the thermal conductivity behavior in Al-diamond MMCs. In Developing the Powder Metallurgy Future (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/49388 ( reposiTUm)

Edtmaier, C. (2016). Fe-, and Ni-based MMCs with Fused Tungstencarbide Particle Inclusions by Hot Extrusion. In Developing the Powder Metallurgy Future (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/49389 ( reposiTUm)

Zemann, R., Sacherl, J., Hake, W., & Bleicher, F. (2015). Tool Life Experimente and Vibration Assistance in Regard to the Machining of CFRP. In C. Edtmaier & G. Requena (Eds.), 20th Symposium on Composites (pp. 707–708). Trans Tech Publicationa. http://hdl.handle.net/20.500.12708/67455 ( reposiTUm)

Zemann, R. (2015). Practical Results to the Long Term Behavior of Fibre Reinforced Polymers under Constant Load. In C. Edtmaier & G. Requena (Eds.), 20th Symposium on Composites (pp. 952–959). Trans Tech Publicationa. http://hdl.handle.net/20.500.12708/67456 ( reposiTUm)

Archodoulaki, V. M., Merola, M., Kastanis, D., Koch, T., & Carlone, P. (2015). Influence of the Impregnation Velocity on Impregnation Quality and Mechanical Properties of Vacuum Assisted Resin Transfer Moulding (VARTM) Materials. In C. Edtmaier & G. Requena (Eds.), 20th Symposium on Composites (pp. 36–43). Materials Science Forum. https://doi.org/10.4028/www.scientific.net/msf.825-826.36 ( reposiTUm)

Pfaffinger, M., Mitteramskogler, G., Gmeiner, R., & Stampfl, J. (2015). Thermal Debinding of Ceramic-Filled Photopolymers. In C. Edtmaier & G. Requena (Eds.), 20th Symposium on Composites (pp. 75–81). Materials Science Forum. https://doi.org/10.4028/www.scientific.net/msf.825-826.75 ( reposiTUm)

Segl, J., & Edtmaier, C. (2015). Optimization of the silicon content in aluminium-, and silver-based diamond composites for future heat sink applications. In Vienna Young Scientists Symposium (pp. 118–119). Book-of-Abstracts.com, Gumpoldskirchen. http://hdl.handle.net/20.500.12708/48885 ( reposiTUm)

Greil, S., Edtmaier, C., & Haubner, R. (2015). Metallography of mint materials. In Vienna Young Scientists Symposium (pp. 128–129). Book-of-Abstracts.com, Gumpoldskirchen. http://hdl.handle.net/20.500.12708/48886 ( reposiTUm)

Edtmaier, C., Bauer, E., Tako, Z. S., Segl, J., Friedbacher, G., Pambaguian, L., & Wulz, H. G. (2014). Thermal conductivity behavior of Ag-, and Al-diamond composites for heat sink applications in the temperature range 4K#ltT#lt298K. In 13th European Conference on Spacecraft Structures, Materials & Environmental Testing (p. 6). ESA Communications. http://hdl.handle.net/20.500.12708/48492 ( reposiTUm)

Edtmaier, C., Bauer, E., & Weber, L. (2013). Wärmeleitfähigkeit von Ag/Si-Diamant Verbundwerkstoffen im Temperaturbereich 5K#ltT#lt293K. In 19. Symposiums Verbundwerkstoffe und Werkstoffverbunde (pp. 219–229). Karlsruher Institut für Technologie. http://hdl.handle.net/20.500.12708/48134 ( reposiTUm)

Edtmaier, C., Schubert, W.-D., Gierl, C., Pilz, L., Plankensteiner, A., & Huber, K. (2013). Pre-sintering behaviour of Mo-powders. In 18. Plansee-Seminar 2013 (p. 11). Plansee Group, Reutte, Austria. http://hdl.handle.net/20.500.12708/48135 ( reposiTUm)

Edtmaier, C., Schubert, W.-D., Kastner, U., Schön, A., & Bock, A. (2013). Processing of W/Cu valuable scraps by ammoniac dissolution. In EMC2013 Non-Ferrous Metals for Sustainable Development in our World: Using Resources Efficiency, Saving Energy and Protecting the Environment (pp. 1111–1125). GDMB Verlag GmbH. http://hdl.handle.net/20.500.12708/48133 ( reposiTUm)

Steinhauer, S., Brunet, E., Maier, T., Mutinati, G. C., Köck, A., Schubert, W.-D., Edtmaier, C., Gspan, C., & Grogger, W. (2011). Synthesis of high-aspect-ratio CuO nanowires for conductometric gas sensing. In G. Kaltsas & C. Tsamis (Eds.), EurosensorsXXV (pp. 1477–1480). Elsevier BV. https://doi.org/10.1016/j.proeng.2011.12.365 ( reposiTUm)

Huber, S., & Edtmaier, C. (2010). Functionally graded W/Cu interlayers for actively cooled “flat-tile” divertor mock-ups. In H. Kaiser & R. Kirner (Eds.), Proceedings of the Junior Scientist Conference 2010 (pp. 181–182). http://hdl.handle.net/20.500.12708/46775 ( reposiTUm)

Köck, A., Maier, T., Tischner, A., Edtmaier, C., Gspan, C., & Kothleitner, G. (2008). Supersensitive Si-Integrated Tin Oxide Nanowire-Sensors for Gas Detection. In Conference Proceedings ESSDERC 2008, Sensors and MEMS (pp. 298–301). http://hdl.handle.net/20.500.12708/46054 ( reposiTUm)

Edtmaier, C., Janhsen, T., Hula, R. C., Konegger, T., Wulz, H. G., & Simancik, F. (2008). Short and Long Carbon Fiber MMCs Using Pre-Coated Fibers. In 1st ExtreMat conference. 1st International Conference on New Materials for Extreme Environments, San Sebastian, Spain, EU. http://hdl.handle.net/20.500.12708/46072 ( reposiTUm)

Edtmaier, C., Janhsen, T., Hula, R. C., Pambaguian, L., Wulz, H. G., Forero, S., & Hepp, F. (2008). Carbon Nanotubes as highly conductive nano-fillers in metallic matrices. In 1st International Conference on New Materials for Extreme Environments. 1st International Conference on New Materials for Extreme Environments, San Sebastian, Spain, EU. http://hdl.handle.net/20.500.12708/46108 ( reposiTUm)

Edtmaier, C., Weber, L., & Tavangar, R. (2008). Surface Modification of Diamonds in Diamond/Al-matrix composites. In 1st International Conference on New Materials for Extreme Environments. 1st International Conference on New Materials for Extreme Environments, San Sebastian, Spain, EU. http://hdl.handle.net/20.500.12708/46109 ( reposiTUm)

Edtmaier, C., Hula, R. C., Pintsuk, G., & Guarnone, P. (2008). Preparation of functionally graded W/Cu interlayers and brazing to CuCrZr and CFC for actively cooled flat tile divertor mock-ups. In 1st International Conference on New Materials for Extreme Environments. 1st International Conference on New Materials for Extreme Environments, San Sebastian, Spain, EU. http://hdl.handle.net/20.500.12708/46110 ( reposiTUm)

Tischner, A., Köck, A., Maier, T., Edtmaier, C., Gspan, C., & Kothleitner, G. (2008). Supersensitive tin oxide nanosensors for gas detection. In H. Kaiser & R. Kirner (Eds.), Junior Scientists Conference 2008 Proceedings (pp. 145–146). http://hdl.handle.net/20.500.12708/46228 ( reposiTUm)

Hula, R. C., & Edtmaier, C. (2008). Silver plated tungsten carbide powders for electrical contact materials with improved homogeneity. In H. Kaiser & R. Kirner (Eds.), Junior Scientists Conference 2008 Proceedings (pp. 153–154). http://hdl.handle.net/20.500.12708/46227 ( reposiTUm)

Köck, A., Maier, T., Tischner, A., Edtmaier, C., Gspan, C., & Kothleitner, G. (2008). Tin oxide nanowire-sensors for gas detection. In OVE Österreichischer Verband für Elektrotechnik 2008, Schriftenreihe Nr. 50 (pp. 155–159). OVE Österreichischer Verband für Elektrotechnik 2008. http://hdl.handle.net/20.500.12708/46166 ( reposiTUm)

Tischner, A., Köck, A., Maier, T., Edtmaier, C., Gspan, C., & Kothleitner, G. (2008). Tin Oxide Nanocrystalline Films and Nanowires for Gas Sensing Applications. In MEMS III: Sensors-Actuators (pp. 6A – 5). http://hdl.handle.net/20.500.12708/46150 ( reposiTUm)

Pambaguian, L., Edtmaier, C., Janhsen, T., Ferrato, M., Forero, S., Frey, T., Girmscheid, R., Helbig, J., Hepp, F., Laurent, C., Peigney, A., & Wulz, H. G. (2007). NON-ORGANIC MATRIX MATERIALS REINFORCED WITH CARBON NANOTUBES FOR SPACE APPLICATIONS. In 2nd Vienna International Conference, Micro- and Nano-Technology (pp. 31–39). http://hdl.handle.net/20.500.12708/45725 ( reposiTUm)

Edtmaier, C., & Himmler, W. (2005). Sintering behaviour of Copper Coated sub-µm W-Powders. In Powder Metallurgical High Performance Materials (pp. 23–34). Plansee Holding AG. http://hdl.handle.net/20.500.12708/45133 ( reposiTUm)

Edtmaier, C., & Haubner, R. (2005). Copper based carbon nanotube heat-sinks. In High Performance PM Metals (pp. 277–289). Plansee Holding AG, Reutte. http://hdl.handle.net/20.500.12708/45132 ( reposiTUm)

Edtmaier, C. (2005). Metall-Matrix-Verbundwerkstoffe mit Carbon Nanotubes als hochfeste und hochwärmeleitende Einlagerungsphase. In Hochleistungsprodukte der Pulvermetallurgie, Pulvermetallurgie in Wissenschaft und Praxis (pp. 115–142). Fachverband Pulvemetallurgie, ISL-Verlag Hagen. http://hdl.handle.net/20.500.12708/45199 ( reposiTUm)

Veitsch, C., Meissl, C., Edtmaier, C., Schubert, W.-D., Schön, A., Bock, A., & Zeiler, B. (2005). Coating of Tungsten Carbide Powders with Cobalt. In Powder Metallurgical High Performance Materials (pp. 528–539). Plansee Holding AG. http://hdl.handle.net/20.500.12708/45134 ( reposiTUm)

Meissl, C., Edtmaier, C., Schubert, W.-D., Schön, A., Bock, A., & Zeiler, B. (2005). A Novel Route to Ultrafine and Nano-Sized Cobalt Powders. In Powder Metallurgical High Performance Materials (pp. 339–352). Plansee Holding AG. http://hdl.handle.net/20.500.12708/45137 ( reposiTUm)

Meissl, C., Edtmaier, C., Schubert, W.-D., Schön, A., Bock, A., & Zeiler, B. (2005). Sintering of Tungsten Carbide - Cobalt Composite Powders. In Powder Metallurgical High Performance Materials (pp. 631–640). Plansee Holding AG. http://hdl.handle.net/20.500.12708/45135 ( reposiTUm)

Meissl, C., Edtmaier, C., Schubert, W.-D., Schön, A., Bock, A., & Zeiler, B. (2005). Formation of Cr and Cr/V-doped Cobalt Oxide and Cobalt Metal Powder. In Powder Metallurgical High Performance Materials (pp. 540–548). Plansee Holding AG. http://hdl.handle.net/20.500.12708/45136 ( reposiTUm)

Edtmaier, C., Schiesser, R., Meissl, C., Schubert, W.-D., Schön, A., Bock, A., & Zeiler, B. (2005). Selective leaching of the cobalt binder from WC/Co hard scraps. In Perspectives of the non-ferrous metals industry in an era of consolidation (pp. 1713–1724). GDMB. http://hdl.handle.net/20.500.12708/45138 ( reposiTUm)

Edtmaier, C., Schiesser, R., Schubert, W.-D., Schön, A., Bock, A., & Zeiler, B. (2005). Recycling of Hardmetal and Heavy Metal Scraps by Molten Salts. In Perspectives of the non-ferrous metals industry in an era of consolidation (pp. 1826–1827). GDMB. http://hdl.handle.net/20.500.12708/45198 ( reposiTUm)

Edtmaier, C., Haubner, R., Zeiler, B., & Ortner, H. (Eds.). (2017). Hardmetals-Raw Materials. Technologies and Applications. Elsevier. http://hdl.handle.net/20.500.12708/24285 ( reposiTUm)

20th Symposium on Composites. (2015). In C. Edtmaier & G. Requena (Eds.), Materials Science Forum. Trans Tech Publications Ltd. http://hdl.handle.net/20.500.12708/24283 ( reposiTUm)

Bauernfeind, T., & Edtmaier, C. (2024). 3D galvanoformed continuous carbon fiber reinforced MMC components using fiber preforms fabricated by tailored fiber placement [Conference Presentation]. WAMS24 Worldwide Advanced Manufacturing Symposium, Orlando, United States of America (the). ( reposiTUm)

Edtmaier, C., Horky, J., Klein, T., Moser, N., Schmitz-Niederau, M., Staufer, E., Easton, M., Klein, M., & Neubauer, E. (2024). High-strength Titanium Alloys and Titanium Composites with high Specific Stiffness for WA-DED Components with Equiaxed Microstructure [Conference Presentation]. WAMS24 Worldwide Advanced Manufacturing Symposium, Orlando, United States of America (the). http://hdl.handle.net/20.500.12708/197927 ( reposiTUm)

Bauernfeind, T., Edtmaier, C., Metzler, W., Moser, M., Riedmann, M., & Schwarz, D. (2023, March 30). 3D galvanoformed continuous carbon fiber reinforced MMC components using fiber preforms fabricated by tailored fiber placement [Conference Presentation]. 23. Werkstofftechnisches Kolloquium, Chemnitz, Germany. http://hdl.handle.net/20.500.12708/188134 ( reposiTUm)

Edtmaier, C., Zunghammer, A., Moser, N., Staufer, E., Horky, J., Neubauer, E., Klein, T., Schmitz-Niederau, M., Trunova, L., & Schneider-Bröskamp, C. (2023, March 30). Titanium MMCs With Enhanced Specific Young’s Modulus Via Powder Hot Extrusion [Conference Presentation]. 23. Werkstofftechnisches Kolloquium, Chemnitz, Germany. http://hdl.handle.net/20.500.12708/188140 ( reposiTUm)

Staufer, E., Edtmaier, C., Klein, T., Schneider-Bröskamp, C., Zhang, D., Easton, M., Qiu, D., Schmitz-Niederau, M., Horky, J., Moser, N., & Trunova, L. (2023, March 30). Effects on microstructure and mechanical properties of the addition of Co, Cr and Fe to the eutectoid system Ti-6.5Cu [Conference Presentation]. 23. Werkstofftechnisches Kolloquium, Chemnitz, Germany. http://hdl.handle.net/20.500.12708/188136 ( reposiTUm)

Klein, T., Arnoldt, A., Edtmaier, C., Horky, J., Pfaffinger, V., Schmitz-Niederau, M., & Staufer, E. (2023, June 21). Effect of Fe and Cr on a eutectoid Ti-6.4(wt.%)Ni alloy developed for wire-arc additive manufacturing [Conference Presentation]. 5th International Conference on Light Materials – Science and Technology (LightMAT 2023), Trondheim, Norway. http://hdl.handle.net/20.500.12708/191577 ( reposiTUm)

Edtmaier, C., Schubert, W.-D., Weissensteiner, C., Zimmerl, T., Mühlbauer, G., Qvick, J., & Holzner, T. (2022). A Metallurgical Approach to the Zinc-Reclaim of W/Cu Composites. 20. Plansee Seminar 2022, Reutte, Austria. http://hdl.handle.net/20.500.12708/101773 ( reposiTUm)

Bauernfeind, T., Edtmaier, C., Metzler, W., Moser, M., Riedmann, M., & Schwarz, D. (2022). Load path optimized 3D galvanoformed carbon fiber reinforced MMC sheets using embroidery from “tailored fiber placement.” 1st International Conference on Advanced Manufacturing for Air, Space and Transportation, Online, Unknown. http://hdl.handle.net/20.500.12708/101759 ( reposiTUm)

Bauernfeind, T., Edtmaier, C., Metzler, W., Moser, M., Riedmann, M., & Schwarz, D. (2022, July 20). 3D galvano-formed continuous carbon fiber reinforced MMC sheets using fiber preforms fabricated by tailored fiber placement [Conference Presentation]. 23. Symposium Verbundwerkstoffe und Verbunde, Leoben, Austria. http://hdl.handle.net/20.500.12708/144380 ( reposiTUm)

De Oro Calderon, R., Steinlechner, R., Lunzer, M., Wodak, I., Edtmaier, C., & Schubert, W.-D. (2022). Critical aspects for an efficient assessment of novel materials designs [Conference Presentation]. 20. Plansee Seminar 2022, Reutte, Austria. ( reposiTUm)

Edtmaier, C. (2021). How to Master Interfaces in MMCs with Reactive Constituents. THERMEC, Graz, Austria. http://hdl.handle.net/20.500.12708/101579 ( reposiTUm)

Edtmaier, C. (2019). Herausforderungen bei der Entwicklung innovativer Hochleistungswerkstoffe. Alumni meet Industry, Wien, Austria. http://hdl.handle.net/20.500.12708/101204 ( reposiTUm)

Edtmaier, C., Haubner, R., Konegger, T., Weil, M., & Stöger, B. (2019). Materials research at the Institute of Chemical Technologies and Analytics - selected topics for 2020. University of Bordeaux, Bordeaux, France. http://hdl.handle.net/20.500.12708/101168 ( reposiTUm)

Bauernfeind, T., Sebo, A., Schleiffelder, M., & Edtmaier, C. (2019). Base 11 Space Challenge - A Composite Rocket. 22. Symposium Verbundwerkstofffe und Werkstoffverbunde, Kaiserslautern, Germany. http://hdl.handle.net/20.500.12708/101139 ( reposiTUm)

Calderon, R. de O., Edtmaier, C., & Schubert, W.-D. (2019). Phase Formation in Cemented Carbides prepared from WC and Cr-rich Binders - correlation between Experimental Studies and Thermodynamic Calculations. EuroMat 2019, Stockholm, Sweden. http://hdl.handle.net/20.500.12708/101237 ( reposiTUm)

Edtmaier, C., Konegger, T., Haubner, R., & Weil, M. (2018). Materials research at the Institute of Chemical Technologies and Analytics - current topics for 2018. University of Bordeaux, Bordeaux, France. http://hdl.handle.net/20.500.12708/100817 ( reposiTUm)

Edtmaier, C. (2018). E-mobility: prospective impact on the PM raw materials demand and recycling strategies. PM AUTO 2018 - 6th international Conference on Powder Metallurgy for Automotive Parts, Isfahan, Iran (Islamic Republic of). http://hdl.handle.net/20.500.12708/100681 ( reposiTUm)

Edtmaier, C., Konegger, T., & Haubner, R. (2017). Materials research at the Institute of Chemical Technologies and Analytics - current topics for 2017. University of Bordeaux, 2017, Bordeaux, France. http://hdl.handle.net/20.500.12708/100278 ( reposiTUm)

Edtmaier, C., Haubner, R., Konegger, T., & Weil, M. (2017). Materials research at the Institute of Chemical Technologies and Analytics - current topics for 2018. University of Bordeaux, 2017, Bordeaux, France. http://hdl.handle.net/20.500.12708/100396 ( reposiTUm)

Edtmaier, C. (2016). Controlling thermal transport at the metal/diamond interface. Summerev 16-Characterisation of Hardmetals and Superhard Materials, Schaan, Liechtenstein. http://hdl.handle.net/20.500.12708/99940 ( reposiTUm)

Edtmaier, C., & Hofer, M. (2015). Wear behaviour of Fe- and Al-based MMCs with WSC fused tungsten carbide particles. 20. Symposium Verbundwerkstoffe und Werkstoffverbunde, Wien, Austria. http://hdl.handle.net/20.500.12708/99580 ( reposiTUm)

Edtmaier, C., & Haubner, R. (2014). Research on the Institute of Chemical Technologies and Analytics and possibilities for Erasmus internships. University of Bordeaux, 2014, Bordeaux, France. http://hdl.handle.net/20.500.12708/99514 ( reposiTUm)

Edtmaier, C., Bauer, E., & Friedbacher, G. (2014). About the interface between diamond and metal in diamond/metal matrix composites. 25th International Conference on Diamond and Carbon Materials 2014, Madrid, Spain. http://hdl.handle.net/20.500.12708/99357 ( reposiTUm)

Zikin, A., Edtmaier, C., Danninger, H., Badisch, E., & Winkelmann, H. (2012). Deposition of modified WC/W2C hard particles using PTA welding Technology. 20th Congress IFHTSE - Internat. Federation for Heat Treatment and Surface Engineering, Beijing, Non-EU. http://hdl.handle.net/20.500.12708/98840 ( reposiTUm)

Edtmaier, C., Weber, L., Bauer, E., Huemer, M.-C., Vernier, B., & Weissensteiner, C. (2011). Thermal conductivity of Al-, and Ag-diamond composites in the temperature range 4 K #lt T #lt 293 K. EUROMAT 2011, Montpellier, EU. http://hdl.handle.net/20.500.12708/98535 ( reposiTUm)

Edtmaier, C., Januschewsky, J., Bernardi, J., & Köck, A. (2009). Growth mechanism, doping and functionalization of one dimensional oxidic nanobelt and nanowire structures for gas sensors. EUROMAT 2009, Glasgow, EU. http://hdl.handle.net/20.500.12708/98038 ( reposiTUm)

Edtmaier, C., Steck, T., Hula, R. C., Pambaguian, L., Hepp, F., & Wulz, H. G. (2009). MMCs with C-Nanotubes: can we go beyond the thermal conductivity of the matrix? EUROMAT 2009, Glasgow, EU. http://hdl.handle.net/20.500.12708/98039 ( reposiTUm)

Edtmaier, C. (2009). Massgeschneiderte Eigenschaften metallischer Verbundwerkstoffe. Ausschuss für Pulvermetallurgie, Wien, Austria. http://hdl.handle.net/20.500.12708/98016 ( reposiTUm)

Edtmaier, C. (2008). Metallische und keramische Verbundwerkstoffe mit hoch wärmeleitenden Einlagerungsphasen. Seminar des Instituts für Festkörperphysik der TU Wien, Wien, Austria. http://hdl.handle.net/20.500.12708/97713 ( reposiTUm)

Eisenmenger-Sittner, C., & Edtmaier, C. (2008). Coatings technology for brazing and processing of C-reinforced copper and silver MMCs for heat sinks. Hannover Messe 2008, Hannover, EU. http://hdl.handle.net/20.500.12708/97749 ( reposiTUm)

Degischer, H.-P., Schöbel, M., Böhm, H. J., Nogales, S., & Edtmaier, C. (2008). MMC-characterisation and Modelling. Extremat-Meeting, Saclay, EU. http://hdl.handle.net/20.500.12708/92720 ( reposiTUm)

Köck, A., Tischner, A., Maier, T., Kast, M., Januschewsky, J., & Edtmaier, C. (2007). Metalloxid-Nanostrukturen für die Gassensorik. 5th LEIBNIZ CONFERENCE OF ADVANCED SCIENCE, NanoScience 2007, Lichtenwalde, Deutschland, EU. http://hdl.handle.net/20.500.12708/97582 ( reposiTUm)

Edtmaier, C. (2006). Nanotube-verstärkte MMCs. Workshop “Pulver - was ändert sich auf dem Weg zu ‘Nano’?”-Montanuniv. Leoben, Montanuniversität Leoben - Ausseninstitut, Austria. http://hdl.handle.net/20.500.12708/97289 ( reposiTUm)

Edtmaier, C. (2005). Metall-Matrix-Verbundwerkstoffe mit Carbon Nanotubes als hochfeste und hochwärmeleitende Einlagerungsphase. Bereichsseminar Materialforschung, Institut für Plasmaphysik, Garching bei München, Austria. http://hdl.handle.net/20.500.12708/96813 ( reposiTUm)

Edtmaier, C., & Wallnöfer, E. (2004). Kupfer- und Silberbasis-MMCs mit Carbon Nanotubes. Werkstoffwoche 2004, München, Austria. http://hdl.handle.net/20.500.12708/96489 ( reposiTUm)

Haubner, R., & Edtmaier, C. (2004). Carbon-Nanotubes – Herstellung und Weiterverarbeitung zu MMCs. 50. Metallkunde-Kolloquium, Lech am Arlberg, Austria. http://hdl.handle.net/20.500.12708/96508 ( reposiTUm)

Haubner, R., & Edtmaier, C. (2003). Elementarer Kohlenstoff - ein Chameleon. 49. Metallkunde-Kolloqium der Universität Leoben, Lech am Arlberg, Austria. http://hdl.handle.net/20.500.12708/96171 ( reposiTUm)

Edtmaier, C. (2002). Pyrometallurgical Refining of secondary Pt-scrap with multi-component composition. International Congress on European Perspectives in Mining and Metallurgy, Vienna, Austria, Austria. http://hdl.handle.net/20.500.12708/95844 ( reposiTUm)

Edtmaier, C., & Hula, R. C. (2008). Heat sinks with short carbon fibres and W/Cu graded composites, Progress report (Phase 4 / Project month 42) (EXM-SP2-PRE-TUW-0026). http://hdl.handle.net/20.500.12708/34961 ( reposiTUm)

Edtmaier, C., & Hula, R. C. (2008). Heat sinks with short carbon fibres and W/Cu graded composites, Progress report (Phase 4 / Project month 48 (EXM-SP2-PRE-TUW-0029). http://hdl.handle.net/20.500.12708/35063 ( reposiTUm)

Edtmaier, C. (2007). Heat sinks with Carbon fibres, Progress report (Phase 3 / Project month 30) (EXM-SP2-PRE-TUW-0020). http://hdl.handle.net/20.500.12708/34962 ( reposiTUm)

Edtmaier, C. (2007). Heat sinks with short carbon fibres and W/Cu graded composites, Progress report (Phase 3 / Project month 36) (EXM-SP2-PRE-TUW-0023). http://hdl.handle.net/20.500.12708/32650 ( reposiTUm)

Edtmaier, C., & Janhsen, T. (2006). Heat sinks with Carbon Nanotubes-Progress report (Phase3/Month 18), EXM-SP2-PRE-TUW-0014. http://hdl.handle.net/20.500.12708/32536 ( reposiTUm)

Edtmaier, C., & Janhsen, T. (2006). Heat sinks with Cf-Progress report (Phase3/Month 24) (EXM-SP2-PRE-TUW-0017). http://hdl.handle.net/20.500.12708/32582 ( reposiTUm)

Edtmaier, C., & Janhsen, T. (2005). Heat sink with carbon nanotubes-Promising concepts refined plan for Phase2. http://hdl.handle.net/20.500.12708/32498 ( reposiTUm)

Edtmaier, C., & Janhsen, T. (2005). Heat sinks with carbon nanotubes-Alternative concepts report phase2. http://hdl.handle.net/20.500.12708/32497 ( reposiTUm)

Edtmaier, C., & Janhsen, T. (2005). Heat sinks with carbon nanotubes-State of the Art review and SWOT analysis report. http://hdl.handle.net/20.500.12708/32499 ( reposiTUm)

Bauernfeind, T., Edtmaier, C., Metzler, W., Riedmann, M., Moser, M., & Schwarz, D. (2023, July). Carbonfaser-Verbundwerkstoffe durch Galvanoformen. Galvanotechnik, 7, 823–827. http://hdl.handle.net/20.500.12708/187691 ( reposiTUm)

Edtmaier, C. (2016). Tailoring thermo-physical properties of metal matrix composites for thermal management applications [Professorial Dissertation, Technische Universität Wien]. reposiTUm. http://hdl.handle.net/20.500.12708/158914 ( reposiTUm)