Wimmer, L., Bienert Christian, Schiftner Robert, & Eisenmenger-Sittner, C. (2024). Effects of non-isothermal annealing on the microstructure of pure and potassium-doped tungsten sheets. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 122, Article 106714. https://doi.org/10.1016/j.ijrmhm.2024.106714 ( reposiTUm)

Riss, A., Garmroudi, F., Parzer, M., Eisenmenger-Sittner, C., Pustogow, A., Mori, T., & Bauer, E. (2024). Material-efficient preparation and thermoelectric properties of metallic NiₓAu₁₋ₓ films with large power factor. Physical Review Materials, 8(9), Article 095403. https://doi.org/10.1103/PhysRevMaterials.8.095403 ( reposiTUm)

Riss, A., Lasisch, E., Podbelsek, S., Schäfer, K., Parzer, M., Garmroudi, F., Eisenmenger-Sittner, C., Mori, T., & Bauer, E. (2024). Iterative composition optimization in Fe₂VA1–based thin-film thermoelectrics using single-target sputtering. Physical Review Materials, 8(9), Article 095402. https://doi.org/10.1103/PhysRevMaterials.8.095402 ( reposiTUm)

Kurinjimala, R., Böhm, D., Pessenhofer, W., & Eisenmenger-Sittner, C. (2023). Physical vapor deposited coatings on high Ni content NMC811 Li-ion battery cathode powder. Surface and Coatings Technology, 462, Article 129472. https://doi.org/10.1016/j.surfcoat.2023.129472 ( reposiTUm)

Böhm, D., Kusztrich, M., Kurinjimala, R., Eder, A., & Eisenmenger-Sittner, C. (2023). Analysis of electrical resistance measurements as a potential determination method for coating thickness on powders. Surface and Coatings Technology, 473, Article 129931. https://doi.org/10.1016/j.surfcoat.2023.129931 ( reposiTUm)

Cupak, C., Brandstätter, F., Cserveny, R., Troneberger, F., Biber, H. A., Fellinger, M., Redl, A., Moro, M. V., Böhm, D., Eisenmenger-Sittner, C., Mutzke, A., Primetzhofer, D., & Aumayr, F. (2023). Absence of synergistic effects in quasi-simultaneous sputtering of tungsten by Ar and D ions. Nuclear Materials and Energy, 35, Article 101435. https://doi.org/10.1016/j.nme.2023.101435 ( reposiTUm)

Werner, W. S. M., Helmberger, F., Schürrer, M., Eisenmenger-Sittner, C., & Ridzel, O. Y. (2022). Measurement of the surface excitation parameter of Kapton, polyethylene (PE), polymethyl methacrylate (PMMA), polystyrene (PS) and polytetrafluoroethylene (PTFE). Surface and Interface Analysis, 54(7), 681–687. https://doi.org/10.1002/sia.7080 ( reposiTUm)

Kirschner, J., Mayr-Schmölzer, W., Bernardi, J., Gaschl, R., Schwarz, S., Simson, C., Vonbun-Feldbauer, G. B., & Eisenmenger-Sittner, C. (2022). Characterization of an Al-Cu-Mg-Zn multi principal element alloy by experimental and computational screening methods. Acta Materialia, 224(117510), 117510. https://doi.org/10.1016/j.actamat.2021.117510 ( reposiTUm)

Unnikrishnan, R., Gardy, D. J., Spencer, B., Kurinjimala, R., Dey, A., Nekouie, V., Irukuvarghula, S., Hassanpour, A., Eisenmenger-Sittner, C., Francis, J. A., & Preuss, M. (2022). Functionalization of metallic powder for performance enhancement. Materials & Design, 221, Article 110900. https://doi.org/10.1016/j.matdes.2022.110900 ( reposiTUm)

Werner, W., Helmberger, F., Schürrer, M., Ridzel, O., Stöger-Pollach, M., & Eisenmenger-Sittner, C. (2022). Electron inelastic mean free path (IMFP) values of Kapton, polyethylene (PE), polymethylmethacrylate (PMMA), polystyrene (PS) and polytetrafluoroethylene (PTFE) measured with elastic peak electron spectroscopy (EPES). Surface and Interface Analysis, 54(8), 855–863. https://doi.org/10.1002/sia.7098 ( reposiTUm)

Kirschner, J., Eisenmenger-Sittner, C., Bernardi, J., Großalber, A., Frank, S., & Simson, C. (2021). Structural Changes in Multi Principal Element Alloys in Dependence on the Aluminium Content. Materials Science Forum, 1016, 691–696. https://doi.org/10.4028/www.scientific.net/msf.1016.691 ( reposiTUm)

Hinterleitner, B., Knapp, I., Poneder, M., Shi, Y., Müller, H., Eguchi, G., Eisenmenger-Sittner, C., Stöger-Pollach, M., Kakefuda, Y., Kawamoto, N., Guo, Q., Baba, T., Mori, T., Ullah, S., Chen, X.-Q., & Bauer, E. (2019). Thermoelectric performance of a metastable thin-film Heusler alloy. Nature, 576(7785), 85–90. https://doi.org/10.1038/s41586-019-1751-9 ( reposiTUm)

Arif, M., Sauer, M., Foelske-Schmitz, A., & Eisenmenger-Sittner, C. (2017). Characterization of aluminum and titanium nitride films prepared by reactive sputtering under different poisoning conditions of target. Journal of Vacuum Science and Technology A, 35(6), 061507. https://doi.org/10.1116/1.4993082 ( reposiTUm)

Ofner, J., Kirschner, J., Eitenberger, E., Friedbacher, G., Kasper-Giebl, A., Lohninger, J., Eisenmenger-Sittner, C., & Lendl, B. (2017). A Novel Substrate for Multisensor Hyperspectral Imaging. Journal of Microscopy, 265(3), 341–348. http://hdl.handle.net/20.500.12708/146312 ( reposiTUm)

Reither, S., Artner, W., Eder, A., Larisegger, S., Nelhiebel, M., Eisenmenger-Sittner, C., & Fafilek, G. (2017). On the In-Situ Grazing Incidence X-Ray Diffraction of Electrochemically Formed Thin Films. Journal of The Electrochemical Society, 80(10), 1231–1238. https://doi.org/10.1149/08010.1231ecst ( reposiTUm)

Ofner, J., Brenner, F., Wieland, K., Eitenberger, E., Kirschner, J., Eisenmenger-Sittner, C., Török, S., Döme, B., Konegger, T., Kasper-Giebl, A., Hutter, H., Friedbacher, G., Lendl, B., & Lohninger, H. (2017). Image-based chemical structure determination. Scientific Reports, 7, Article 6832. https://doi.org/10.1038/s41598-017-07041-x ( reposiTUm)

Paschinger, W., Rogl, G., Grytsiv, A., Michor, H., Heinrich, P., Müller, H., Puchegger, S., Klobes, B., Hermann, R. P., Reinecker, M., Eisenmenger-Sittner, C., Broz, P., Bauer, E., Giester, G., Zehetbauer, M., & Rogl, P. F. (2016). Ba-filled Ni–Sb–Sn based skutterudites with anomalously high lattice thermal conductivity. Dalton Transactions, 45(27), 11071–11100. https://doi.org/10.1039/c6dt01298a ( reposiTUm)

Berger, B. M., Stadlmayr, R., Meisl, G., Čekada, M., Eisenmenger-Sittner, C., Schwarz-Selinger, T., & Aumayr, F. (2016). Transient effects during erosion of WN by deuterium ions studied with the quartz crystal microbalance technique. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 382, 82–85. https://doi.org/10.1016/j.nimb.2016.04.060 ( reposiTUm)

Schmid, G., Bauer, J., Eder, A., & Eisenmenger-Sittner, C. (2016). A hybrid hydrolytic hydrogen storage system based on catalyst-coated hollow glass microspheres. International Journal of Energy Research, 3659, 18. http://hdl.handle.net/20.500.12708/149163 ( reposiTUm)

Eder, A., Schmid, G. H. S., Mahr, H., & Eisenmenger-Sittner, C. (2016). Aspects of thin film deposition on granulates by physical vapor deposition. The European Physical Journal D. https://doi.org/10.1140/epjd/e2016-70435-7 ( reposiTUm)

Radić, N., Eisenmenger-Sittner, C., Erdélyi, Z., & Panjan, P. (2015). Selected papers from 16th International Conference on Thin Films, October 13 - 16, 2014, Dubrovnik, Croatia. Thin Solid Films, 591, 157–158. https://doi.org/10.1016/j.tsf.2015.06.040 ( reposiTUm)

Pelzl, J., Kijamnajsuk, P., Chirtoc, M., Horny, N., & Eisenmenger-Sittner, C. (2015). Correlation Between Thermal Interface Conductance and Mechanical Adhesion Strength in Cu-Coated Glassy Carbon. International Journal of Thermophysics, 36(9), 2475–2485. https://doi.org/10.1007/s10765-015-1879-2 ( reposiTUm)

Stelmachowski, J., Rymuza, Z., & Eisenmenger-Sittner, C. (2014). Surface properties of AlCuFeB coatings with focus on resolving tribological issues of nanoimprint lithography. RSC Advances, 4(56), 29474–29478. https://doi.org/10.1039/c4ra01888e ( reposiTUm)

Mayrhofer, P. M., Eisenmenger-Sittner, C., Stöger-Pollach, M., Euchner, H., Bittner, A., & Schmid, U. (2014). The impact of argon admixture on the c-axis oriented growth of direct current magnetron sputtered ScxAl1xN thin films. Journal of Applied Physics, 115(19), 193505. https://doi.org/10.1063/1.4876260 ( reposiTUm)

Schmid, G., & Eisenmenger-Sittner, C. (2013). A method for uniformly coating powdery substrates by magnetron sputtering. Surface and Coatings Technology, 236, 353–360. https://doi.org/10.1016/j.surfcoat.2013.10.012 ( reposiTUm)

Mayrhofer, P. M., Eisenmenger-Sittner, C., Euchner, H., Bittner, A., & Schmid, U. (2013). Influence of c-axis orientation and scandium concentration on infrared active modes of magnetron sputtered ScxAl1-xN thin films. Applied Physics Letters, 103(25), 251903. https://doi.org/10.1063/1.4850735 ( reposiTUm)

Malik, Z., Grytsiv, A., Michor, H., Rogl, G., Puchegger, S., Müller, H., Kriegisch, M., Bauer, E., Eisenmenger-Sittner, C., & Rogl, P. (2013). Physical Properties of the Ternary Borides Ni21Zn2B20 and Ni3ZnB2. Journal of Alloys and Compounds, 550, 302–307. https://doi.org/10.1016/j.jallcom.2012.09.122 ( reposiTUm)

Vollnhofer, W., Eisenmenger-Sittner, C., Mozdzen, G., & Neubauer, E. (2012). Deposition of coatings containing quasicrystalline AlCuFeB and β phase by magnetron sputtering. Surface and Coatings Technology, 211, 122–126. https://doi.org/10.1016/j.surfcoat.2011.07.040 ( reposiTUm)

Hell, J., Chirtoc, M., Eisenmenger-Sittner, C., Hutter, H., Kornfeind, N., Kijamnajsuk, P., Kitzmantel, M., Neubauer, E., & Zellhofer, K. (2012). Characterisation of sputter deposited niobium and boron interlayer in the copper-diamond system. Surface and Coatings Technology, 208, 24–31. https://doi.org/10.1016/j.surfcoat.2012.07.068 ( reposiTUm)

Kijamnajsuk, P., Pelzl, J., Chirtoc, M., Horny, N., Schäfer, D., & Eisenmenger-Sittner, C. (2012). Photothermal Evidence of Laterally Inhomogeneous Interfacial Thermal Resistance in Copper-Coated Carbon Samples. International Journal of Thermophysics, 33(10–11), 2132–2138. https://doi.org/10.1007/s10765-012-1277-y ( reposiTUm)

Dobes, K., Naderer, P., Lachaud, N., Eisenmenger-Sittner, C., & Aumayr, F. (2011). Sputtering of tungsten by N⁺ and N₂⁺ ions: investigations of molecular effects. Physica Scripta, T145, 014017. https://doi.org/10.1088/0031-8949/2011/t145/014017 ( reposiTUm)

Schäfer, D., Eisenmenger-Sittner, C., Chirtoc, M., Kijamnajsuk, P., Kornfeind, N., Hutter, H., Neubauer, E., & Kitzmantel, M. (2011). Characterization of the mechanical and thermal interface of copper films on carbon substrates modified by boron based interlayers. Surface and Coatings Technology, 205(12), 3729–3735. https://doi.org/10.1016/j.surfcoat.2011.01.039 ( reposiTUm)

Werner, W. S. M., Smekal, W., Salvat-Pujol, F., Halavani, Z., Pfleger, S., Rastl, J., & Eisenmenger-Sittner, C. (2011). Angular dependence of electron induced surface plasmon excitation. Applied Physics Letters, 98(19), 193111. https://doi.org/10.1063/1.3587749 ( reposiTUm)

Hunger, H., Litzow, U., Genze, S., Dörr, N., Karner, D., & Eisenmenger-Sittner, C. (2010). Tribological characterisation and surface analysis of diesel lubricated sliding contacts. Tribologie + Schmierungstechnik, 57(6), 6–13. http://hdl.handle.net/20.500.12708/168212 ( reposiTUm)

Hula, R. C., Edtmaier, C., Holzweber, M., Hutter, H., & Eisenmenger-Sittner, C. (2010). The wetting behaviour of silver on carbon, pure and carburized nickel, cobalt and molybdenum substrates. Applied Surface Science, 256(14), 4697–4701. http://hdl.handle.net/20.500.12708/166708 ( reposiTUm)

Horkel, M., Van Aeken, K., Eisenmenger-Sittner, C., Depla, D., Mahieu, S., & Leroy, W. P. (2010). Experimental determination and simulation of the angular distribution of the metal flux during magnetron sputter deposition. Journal of Physics D: Applied Physics, 43(7), 075302. https://doi.org/10.1088/0022-3727/43/7/075302 ( reposiTUm)

Hell, J., Horkel, M., Neubauer, E., & Eisenmenger-Sittner, C. (2010). Construction and characterization of a sputter deposition system for coating granular materials. Vacuum, 84(4), 453–457. https://doi.org/10.1016/j.vacuum.2009.09.007 ( reposiTUm)

Schmid, G., Eisenmenger-Sittner, C., Hell, J., Horkel, M., Keding, M., & Mahr, H. (2010). Optimization of a container design for depositing uniform metal coatings on glass microspheres by magnetron sputtering. Surface and Coatings Technology, 205(7), 1929–1936. https://doi.org/10.1016/j.surfcoat.2010.08.076 ( reposiTUm)

Biamino, S., Antonini, A., Eisenmenger-Sittner, C., Fuso, L., Pavese, M., Fino, P., Bauer, E., & Badini, C. (2010). Multilayer SiC for thermal protection system of space vehicles with decreased thermal conductivity through the thickness. Journal of the European Ceramic Society, 30(8), 1833–1840. https://doi.org/10.1016/j.jeurceramsoc.2010.01.040 ( reposiTUm)

Horkel, M., Mahr, H., Hell, J., Eisenmenger-Sittner, C., & Neubauer, E. (2009). Determination of the thickness of metal coatings on granular diamond materials by spatially resolved optical methods. Vacuum, 84(1), 57–60. https://doi.org/10.1016/j.vacuum.2009.04.010 ( reposiTUm)

Schäfer, D., Hell, J., Eisenmenger-Sittner, C., Neubauer, E., Hutter, H., & Kornfeind, N. (2009). Suppression of de-wetting of copper coatings on carbon substrates by metal (Cr, Mo, Ti) doped boron interlayers. Vacuum, 84(1), 202–204. https://doi.org/10.1016/j.vacuum.2009.04.017 ( reposiTUm)

Steiner, H., Eisenmenger-Sittner, C., & Schwarz, B. (2008). Temperature induced recrystallization of copper coatings deposited on adhesion promoting molybdenum interlayers. Journal of Physics: Conference Series, 100(8), 082032. https://doi.org/10.1088/1742-6596/100/8/082032 ( reposiTUm)

Sato Turtelli, R., Pascarelli, S., Ruffoni, M., Grössinger, R., & Eisenmenger-Sittner, C. (2008). Extended X-ray absorption fine structure (EXAFS) and X-ray absorption near-edge structure (XANES) study of melt-spun Fe₈₅Ga₁₅ ribbons. Journal of Magnetism and Magnetic Materials, 320(20), e578–e582. https://doi.org/10.1016/j.jmmm.2008.04.036 ( reposiTUm)

Schwarz, B., Worbs, P., & Eisenmenger-Sittner, C. (2008). Applications of a high temperature sessile drop device. Journal of Physics: Conference Series, 100(8), 082044. https://doi.org/10.1088/1742-6596/100/8/082044 ( reposiTUm)

Schwarz, B., Eisenmenger-Sittner, C., & Steiner, H. (2008). Construction of a high-temperature sessile drop device. Vacuum, 82(2), 186–188. https://doi.org/10.1016/j.vacuum.2007.07.033 ( reposiTUm)

Vollnhofer, W., Eisenmenger-Sittner, C., Hell, J., Kiniger, M., Schwarz, B., Steiner, H., & Tomastik, C. (2008). The influence of temperature treatment and carbon addition on the surface morphology and the surface energy of molybdenum layers on carbon substrates. Surface and Interface Analysis, 40(3–4), 526–528. https://doi.org/10.1002/sia.2613 ( reposiTUm)

Kiniger, M., Eisenmenger-Sittner, C., Hell, J., Schwarz, B., Hutter, H., & Puchner, S. (2008). Carbide formation upon heat treatment of molybdenum layers deposited on carbon substrates: comparison of experimental data with a cellular automaton model. Surface and Interface Analysis, 40(3–4), 786–789. https://doi.org/10.1002/sia.2740 ( reposiTUm)

Schwarz, B., Eisenmenger-Sittner, C., Klein, E., Tomastik, C., Mayerhofer, K. E., Barna, P. B., & Kovács, A. (2006). Passivation of Al surfaces against oxidation by monoatomic Sn wetting layers. Surface and Coatings Technology, 200(22–23), 6484–6489. http://hdl.handle.net/20.500.12708/172638 ( reposiTUm)

Eisenmenger-Sittner, C., Schwarz, B., Tomastik, C., Barna, P. B., & Kovács, A. (2006). Experimental studies of solid state surface wetting of tin (Sn) on aluminium (Al). Applied Surface Science, 252(15), 5466–5469. http://hdl.handle.net/20.500.12708/172635 ( reposiTUm)

Kvasnica, S., Schalko, J., Eisenmenger-Sittner, C., Bernardi, J., Vorlaufer, G., Pauschitz, A., & Roy, M. (2006). Nanotribological study of PECVD DLC and reactively sputtered Ti containing carbon films. Diamond and Related Materials, 15(10), 1743–1752. https://doi.org/10.1016/j.diamond.2006.03.005 ( reposiTUm)

Schwarz, B., Schrank, C., Eisenmenger-Sittner, C., Stöger-Pollach, M., Rosner, M., & Neubauer, E. (2006). Molybdenum interlayers as adhesion promotors for thin copper films on plasma treated glassy carbon. Surface and Coatings Technology, 200(16–17), 4891–4896. http://hdl.handle.net/20.500.12708/172570 ( reposiTUm)

Eisenmenger-Sittner, C., Schrank, C., Neubauer, E., Eiper, E., & Keckes, J. (2006). Modification of wetting of copper (Cu) on carbon (C) by plasma treatment and molybdenum (Mo) interlayers. Applied Surface Science, 252(15), 5343–5346. http://hdl.handle.net/20.500.12708/172637 ( reposiTUm)

Neubauer, E., Chotikaprakhan, S., Dietzel, D., Bein, B. K., Pelzl, J., Eisenmenger-Sittner, C., Schrank, C., & Korb, G. (2006). Loss of adhesion strength of PVD Cu films on carbon substrates after heat treatment and correlated effects on the thermal interface properties. Applied Surface Science, 252(15), 5432–5436. http://hdl.handle.net/20.500.12708/172636 ( reposiTUm)

Klein, E., Schwarz, B., Eisenmenger-Sittner, C., Tomastik, C., Barna, P. B., & Kovács, A. (2005). The initial states of wetting and spreading of Sn and Al surface. Vacuum, 80(1–3), 74–80. http://hdl.handle.net/20.500.12708/172431 ( reposiTUm)

Armelao, L., Eisenmenger-Sittner, C., Groenewolt, M., Gross, S., Sada, C., Schubert, U., Tondello, E., & Zattin, A. (2005). Zirconium and hafnium oxoclusters as molecular building blocks for highly dispersed ZrO₂ or HfO₂ nanoparticles in silica thin films. Journal of Materials Chemistry, 15(18), 1838–1848. http://hdl.handle.net/20.500.12708/172875 ( reposiTUm)

Schrank, C., Schwarz, B., Eisenmenger-Sittner, C., Mayerhofer, K. E., & Neubauer, E. (2005). Influence of thermal treatment on the adhesion of copper coatings on carbon substrates. Vacuum, 80(1–3), 122–127. http://hdl.handle.net/20.500.12708/172432 ( reposiTUm)

Mayerhofer, K. E., Schrank, C., Eisenmenger-Sittner, C., & Hutter, H. (2005). Characterisation of molybdenum intermediate layers in Cu-C system with SIMS method. Applied Surface Science, 252(1), 266–270. http://hdl.handle.net/20.500.12708/172433 ( reposiTUm)

Eisenmenger-Sittner, C., Bangert, H., Joo, H. Y., Barna, P. B., & Kovács, A. (2005). Lamellar growth in sputter-deposited aluminum-tin-aluminum sandwich layers. Thin Solid Films, 473(1), 9–15. http://hdl.handle.net/20.500.12708/172434 ( reposiTUm)

Wimmer, L., Bienert, C., Schiftner, R., & Eisenmenger-Sittner, C. (2024). Correlation of laser-reflection and thermionic emission of thermally loaded coatings under UHV conditions. In ICMCTF2024 Abstract Book (pp. 2–2). http://hdl.handle.net/20.500.12708/210527 ( reposiTUm)

Niggas, A., Thima Daniel, Vukovic, F., Vojtech, V., Werl, M., Buck, J., Eisenmenger-Sittner, C., Aumayr, F., Lemell, C., Rossnagel, K., & Wilhelm, R. A. (2024). Angle- and Energy-Resolved Spectroscopy of Electrons Emitted from Surfaces by Impact of Slow Highly Charged Ions. In 21st Highly Charged Ions Conference: Book of Abstracts. 21st International Highly Charged Ions Conference (HCI-21), Egmond aan Zee, Netherlands (the). http://hdl.handle.net/20.500.12708/200408 ( reposiTUm)

Schachinger, T., Löffler, S., Steiger-Thirsfeld, A., Stöger-Pollach, M., Tavabi, A. H., Venturi, F., Grillo, V., Horák, M., Eisenmenger-Sittner, C., Dunin-Borkowski, R., & Schattschneider, P. (2019). Progress in vortex filter EMCD: Experimental evidence and sub-nanometre resolution. In MC2019 Abstracts (pp. 616–617). http://hdl.handle.net/20.500.12708/77952 ( reposiTUm)

Schachinger, T., Löffler, S., Steiger-Thirsfeld, A., Stöger-Pollach, M., Stöger-Pollach, M., Tavabi, A. H., Venturi, F., Grillo, V., Horák, M., Eisenmenger-Sittner, C., Dunin-Borkowski, R., & Schattschneider, P. (2019). Vortex filter EMCD: Experimental evidence for sub-nanometre resolution. In Q-SORT (pp. 96–98). http://hdl.handle.net/20.500.12708/77949 ( reposiTUm)

Hébert, C., Satz, A., Kothleitner, G., Eisenmenger-Sittner, C., & Schattschneider, P. (2006). Lifetime of hot electrons in Au and Cu retrieved from low loss EELS. In ACMM (19) - Program & Abstracts (p. 1). http://hdl.handle.net/20.500.12708/44288 ( reposiTUm)

Hébert, C., Satz, A., Kothleitner, G., Eisenmenger-Sittner, C., & Schattschneider, P. (2006). Lifetime of hot electronics in gold retrieved from loss EELS. In J. Luitz (Ed.), AK EELS-EFTEM; 5. Workshop on Electron Loss Spectrometry and Engergy Filtering (p. 1). Editio Amici - Physicae et chimicae solidorum amici. http://hdl.handle.net/20.500.12708/44307 ( reposiTUm)

Hébert, C., Satz, A., Kothleitner, G., Eisenmenger-Sittner, C., & Schattschneider, P. (2006). Lifetime of hot electrons in metals retrived from low loss EELS. In Microscopy and Microanalysis (pp. 1168 CD-1169 CD). http://hdl.handle.net/20.500.12708/44303 ( reposiTUm)

Wimmer, L., Bienert Christian, Schiftner Robert, & Eisenmenger-Sittner, C. (2024, September 26). Influencing the microstructure of rolled K-doped tungsten sheets to improve high temperature mechanical behavior [Conference Presentation]. MSE 2024: International Materials Science and Engineering Congress, Darmstadt, Germany. http://hdl.handle.net/20.500.12708/208606 ( reposiTUm)

Böhm, D., Schrefl, T., Eder, A., & Eisenmenger-Sittner, C. (2023, May 22). Structure and crystallographic properties of multi-material coatings deposited in a combinatorial sputter plant compared to simulations from the machine level to microstructure [Conference Presentation]. 49th International Conference on Metallurgical Coatings and Thin Films (ICMCTF 2023), San Diego, United States of America (the). http://hdl.handle.net/20.500.12708/190727 ( reposiTUm)

Eisenmenger-Sittner, C., & Thajer, L. (2022, November 9). Laser reflection as an in-situ tool to monitor the condition of surfaces during vacuum-based cleaning or coating processes [Conference Presentation]. 22nd International Vacuum Congress (IVC 22), Sapporo, Japan. ( reposiTUm)

Eisenmenger-Sittner, C., Thajer, L., & Wimmer, L. (2022, July 11). Laser reflection: an in-situ tool to monitor the condition of surfaces during vacuum-based cleaning, coating or annealing [Conference Presentation]. Seminar der Österreichischen Gesellschaft für Vakuumtechnik 2022, Leoben, Austria. ( reposiTUm)

Böhm, D., Schrefl, T., Eder, A., & Eisenmenger-Sittner, C. (2021). Prediction of composition and structural properties of sputtered multi-component coatings by a Virtual Machine. ÖGV-Seminar 2021, Seminar der Österreichischen Gesellschaft für Vakuumtechnik 2021, Wien, Austria. http://hdl.handle.net/20.500.12708/135582 ( reposiTUm)

Böhm, D., Schrefl, T., Eder, A., & Eisenmenger-Sittner, C. (2021). Prediction of composition, crystalline structure and microstructure of sputtered multi-component coatings by a Virtual Machine. ICMCTF 2021, San Diego/USA, United States of America (the). http://hdl.handle.net/20.500.12708/135579 ( reposiTUm)

Cupak, C., Troneberger, F., Biber, H., Szabo, P., Wilhelm, R., Böhm, D., Eisenmenger-Sittner, C., Moro, M. V., Primetzhofer, D., & Aumayr, F. (2021). Synergistic sputtering effects during quasi-concurrent Ar and D2 ion beam irradiation of tungsten films. 18th International Conference on Plasma-Facing Materials and Components for Fusion Applications (PFMC-18), Jülich, virtuel, Germany. http://hdl.handle.net/20.500.12708/135412 ( reposiTUm)

Kirschner, J., Gaschl, R., Eisenmenger-Sittner, C., Bernardi, J., & Simson, C. (2021). Investigation of the Elemental Correlation in AlCuMgZn Multi Principal Element Alloys. ÖGV-Seminar 2021, Seminar der Österreichischen Gesellschaft für Vakuumtechnik 2021, Wien, Austria. http://hdl.handle.net/20.500.12708/135581 ( reposiTUm)

Kirschner, J., Eisenmenger-Sittner, C., Rasinger, G., Gaschl, R., Bernardi, J., Großalber, A., Frank, S., & Simson, C. (2021). Stoichometry-driven Crystallographic Phase Transitions of AlCuMgZn Alloys. THERMEC 2021, Online, Austria. http://hdl.handle.net/20.500.12708/135580 ( reposiTUm)

Kirschner, J., Gaschl, R., Eisenmenger-Sittner, C., Bernardi, J., & Simson, C. (2021). Systematic Investigation of the Impact of Pure Metal Addition on AlCuMgZn Multi Principal Element Alloys. ICMCTF 2021, San Diego/USA, United States of America (the). http://hdl.handle.net/20.500.12708/135578 ( reposiTUm)

Böhm, D., Schrefl, T., Eder, A., & Eisenmenger-Sittner, C. (2020). Prediction of composition and crystalline structure of sputtered multi-component coatings by a Virtual Machine. 18th International Conference on Thin Films/18th Joint Vacuum Conference (ICTF18/JVC-18), Budapest, Hungary. http://hdl.handle.net/20.500.12708/135324 ( reposiTUm)

Eisenmenger-Sittner, C., Böhm, D., & Kirschner, J. (2020). High rate magnetron sputtering and computer supported modelling as a tool to create complex materials. 18th International Conference on Thin Films/18th Joint Vacuum Conference (ICTF18/JVC-18), Budapest, Hungary. http://hdl.handle.net/20.500.12708/135322 ( reposiTUm)

Kirschner, J., Rasinger, G., Eisenmenger-Sittner, C., Bernardi, J., & Simson, C. (2020). Effect of the relative Al to Cu Content in AlCuMgZn Multi-Principal Element Alloys. 18th International Conference on Thin Films/18th Joint Vacuum Conference (ICTF18/JVC-18), Budapest, Hungary. http://hdl.handle.net/20.500.12708/135323 ( reposiTUm)

Reither, S., Artner, W., Eder, A., Larisegger, S., Nelhiebel, M., Eisenmenger-Sittner, C., & Fafilek, G. (2019). A Novel in-situ Grazing-Incidence-XRD Electrochemical Cell for the Characterisation of Electrodes. International Workshop IRP 3.3 Electrochemical Power Sources, Brno, Czechia. http://hdl.handle.net/20.500.12708/101218 ( reposiTUm)

Reither, S., Artner, W., Eder, A., Larisegger, S., Nelhiebel, M., Eisenmenger-Sittner, C., & Fafilek, G. (2017). In-Situ Gracing Incidence X-Ray Diffraction Cell for Electrochemically Formed Thin Films. 232nd ECS Meeting, National Harbor, United States of America (the). http://hdl.handle.net/20.500.12708/100480 ( reposiTUm)

Eder, A., Schmid, G., Stöttinger, L., Mahr, H., & Eisenmenger-Sittner, C. (2016). PVD coatings on arbitrary shaped granular materials, prediction and measurement of film properties. 16th Joint Vacuum Conference (JVC-16), Portoroz, Slovenien, EU. http://hdl.handle.net/20.500.12708/132989 ( reposiTUm)

Muhammad, A., & Eisenmenger-Sittner, C. (2016). Investigation of Target Poisoning in Reactive Sputtering by Optical Reflectometry. 20th International Vacuum Congress (IVC-20), Busan/Korea, Non-EU. http://hdl.handle.net/20.500.12708/132991 ( reposiTUm)

Muhammad, A., & Eisenmenger-Sittner, C. (2016). An in situ Assessment of the Roughness of a Uniformly Eroded Cylindrical Magnetron Target. 16th Joint Vacuum Conference (JVC-16), Portoroz, Slovenien, EU. http://hdl.handle.net/20.500.12708/132990 ( reposiTUm)

Stöttinger, L., Eder, A., Schmid, G., & Eisenmenger-Sittner, C. (2016). Deposition of metallic coatings on transparent, non conductive granulates: a comparative study of the performance of two different coating mechanisms. 20th International Vacuum Congress (IVC-20), Busan/Korea, Non-EU. http://hdl.handle.net/20.500.12708/132992 ( reposiTUm)

Muhammad, A., & Eisenmenger-Sittner, C. (2016). In Situ Assessment Of Target Poisoning Evolution In Magnetron Sputtering. 15th International Conference on Reactive Sputter Deposition 2016 (RSD-2016), Belgium, Gent, EU. http://hdl.handle.net/20.500.12708/132993 ( reposiTUm)

Eder, A., Schmid, G., Stöttinger, L., & Eisenmenger-Sittner, C. (2015). Beschichtung granularer Materialien in großem Maßstab mittels Kathodenzerstäubung. 20. Symposium Verbundwerkstoffe und Werkstoffverbunde, Wien, Austria. http://hdl.handle.net/20.500.12708/132308 ( reposiTUm)

Eisenmenger-Sittner, C. (2015). Highlights and Challenges in Thin Film Deposition. AVS 62nd International Symposium & Exhibition (AVS-62)/IUVSTA Highlight Seminar, San Jose, CA, USA, Non-EU. http://hdl.handle.net/20.500.12708/132309 ( reposiTUm)

Schmid, G., Bauer, J. F., & Eisenmenger-Sittner, C. (2015). Magnetron sputtered catalytic coatings on hollow glass microspheres for a H2-storage system. Int. Conf. for Metallurgical Coatings and Thin Films, San Diego, Austria. http://hdl.handle.net/20.500.12708/132305 ( reposiTUm)

Eisenmenger-Sittner, C., Eder, A., & Schmid, G. (2015). Deposition, Characterization And Applications Of Thin Films On Granular Substrates. 9th Symposium on Vacuum based Science and Technology, Kolobrzeg, Polen, EU. http://hdl.handle.net/20.500.12708/132315 ( reposiTUm)

Eisenmenger-Sittner, C., Eder, A., Mahr, H., & Schmid, G. (2015). PVD-Beschichtung fragiler, transparenter Granulate. 20. Symposium Verbundwerkstoffe und Werkstoffverbunde, Wien, Austria. http://hdl.handle.net/20.500.12708/132307 ( reposiTUm)

Eder, A., Schmid, G., Mahr, H., & Eisenmenger-Sittner, C. (2015). Construction and characterisation of a device to coat large quantities of granular materials by magnetron aputtering. Int. Conf. for Metallurgical Coatings and Thin Films, San Diego, Austria. http://hdl.handle.net/20.500.12708/132306 ( reposiTUm)

Bachofner, R., Schmid, G., Stöttinger, L., & Eisenmenger-Sittner, C. (2014). Design, optimization and experimental evaluation of a device to measure hydrogen release from coated hollow glass microspheres. 15th Joint Vacuum Conference (JVC15), Hotel Kaiserwasser, Wien, Austria. http://hdl.handle.net/20.500.12708/131511 ( reposiTUm)

Eder, A., Stöttinger, L., Schmid, G., & Eisenmenger-Sittner, C. (2014). Feasibility assessment and construction of a device to coat large quantities of granular materials by magnetron sputtering. 15th Joint Vacuum Conference (JVC15), Hotel Kaiserwasser, Wien, Austria. http://hdl.handle.net/20.500.12708/131384 ( reposiTUm)

Eder, A., Schmid, G., & Eisenmenger-Sittner, C. (2014). Construction and characterisation of a device to coat large quantities of granular materials by magnetron sputtering. 16th International Conference on Thin Films, Dubrovnik, Kroatien, EU. http://hdl.handle.net/20.500.12708/131385 ( reposiTUm)

Schmid, G., Bachofner, R., Stöttinger, L., & Eisenmenger-Sittner, C. (2014). Hydrolysis of NaBH4 on catalyst coated glass micro spheres. 15th Joint Vacuum Conference (JVC15), Hotel Kaiserwasser, Wien, Austria. http://hdl.handle.net/20.500.12708/131386 ( reposiTUm)

Schmid, G., Bauer, J., & Eisenmenger-Sittner, C. (2014). Catalytical thin films on hollow glass microspheres for NaBH4 hydrolysis. 16th International Conference on Thin Films, Dubrovnik, Kroatien, EU. http://hdl.handle.net/20.500.12708/131387 ( reposiTUm)

Paschinger, W., Rogl, G., Grytsiv, A., Rogl, P. F., Bauer, E., Michor, H., Eisenmenger-Sittner, C., Royanian, E., Heinrich, P., Zehetbauer, M., Horky, J., Puchegger, S., Reinecker, M., Giester, G., Broz, P., & Bismarck, A. (2014). Novel Thermoelectric Skutterudites in the system Ni-Sb-Sn. 16th Annual Conference YUCOMAT 2014, Herceg Novi, Montenegro. http://hdl.handle.net/20.500.12708/131645 ( reposiTUm)

Smolle, M. T., Bachofner, R., Mahr, H., Schmid, G., & Eisenmenger-Sittner, C. (2014). Determination of the thickness uniformity on coated hollow glass microspheres. 15th Joint Vacuum Conference (JVC15), Hotel Kaiserwasser, Wien, Austria. http://hdl.handle.net/20.500.12708/131512 ( reposiTUm)

Schmid, G., & Eisenmenger-Sittner, C. (2013). Coating of granulates and powders by magnetron sputtering. Invited talk, 19th International Vacuum Congress (IVC-19), Paris/France, EU. http://hdl.handle.net/20.500.12708/130562 ( reposiTUm)

Ocypa, Ł., Rymuza, Z., Vollnhofer, W., Eisenmenger-Sittner, C., & Stelmachowski, J. (2013). Ultrathin quasicrystal films deposited on silicon for controlling friction and adhesion. 12th International Conference on Quasicrystals (ICQ 12), Krakau, Polen, EU. http://hdl.handle.net/20.500.12708/130564 ( reposiTUm)

Mahr, H., Smolle, M. T., & Eisenmenger-Sittner, C. (2013). Film thickness measurement with high spatial resolution on granular materials via optical methods. Invited talk, 19th International Vacuum Congress (IVC-19), Paris/France, EU. http://hdl.handle.net/20.500.12708/130563 ( reposiTUm)

Feiertag, D., Eisenmenger-Sittner, C., & Mahr, H. (2012). Fast Determination Of The Optical Properties Of Metallic And Dielectric Thin Films. Joint Vacuum Conference 14 (JVC-14), Dubrovnik, Kroatien, Non-EU. http://hdl.handle.net/20.500.12708/130054 ( reposiTUm)

Eisenmenger-Sittner, C., Vollnhofer, W., Ocypa, Ł., Piwko, M., & Rymuza, Z. (2012). Nanotribological Behaviour Of Quasicrystalline Ultrathin Films Pvd Deposited On Silicon. 6th International Colloquium MICRO TRIBOLOGY 2012, Osiek-Warsaw, EU. http://hdl.handle.net/20.500.12708/130053 ( reposiTUm)

Schmid, G., Quirchmair, M., & Eisenmenger-Sittner, C. (2012). TiO2 FILMS DEPOSITED ON PLANAR AND GRANAULAR SUBSTRATES BY PULSED DC MAGNETRON SPUTTERING. Joint Vacuum Conference 14 (JVC-14), Dubrovnik, Kroatien, Non-EU. http://hdl.handle.net/20.500.12708/130056 ( reposiTUm)

Eisenmenger-Sittner, C. (2012). Thin Film Deposition on Uncommon Substrates: Deposition and Possible Application of PVD Coatings on Granulates. 6th Vacuum and Surface Sciences Conference of Asia and Australia (VASSCAA-6), Pak-China Friendship Center, Islamabad/Pakistan, Non-EU. http://hdl.handle.net/20.500.12708/130057 ( reposiTUm)

Mahr, H., Feiertag, D., & Eisenmenger-Sittner, C. (2012). Automated Determination Of The Thickness Of Transparent Films On Granular Substrates. Joint Vacuum Conference 14 (JVC-14), Dubrovnik, Kroatien, Non-EU. http://hdl.handle.net/20.500.12708/130055 ( reposiTUm)

Vollnhofer, W., Eisenmenger-Sittner, C., Mozden, G., & Neubauer, E. (2011). Deposition of coatings containing quasicrystalline AlCuFeB and approximants by magnetron sputtering. E-MRS Spring Meeting 2011, Nizza, Frankreich, EU. http://hdl.handle.net/20.500.12708/129224 ( reposiTUm)

Vollnhofer, W., Zawrel, R., & Eisenmenger-Sittner, C. (2011). Bestimmung der Korngrößen von polykristallinen Metalllegierungen mittels elektrischer Widerstandsmessung. 16. Tagung Festkörperanalytik, Wien, Austria. http://hdl.handle.net/20.500.12708/129225 ( reposiTUm)

Vollnhofer, W., Zawrel, R., & Eisenmenger-Sittner, C. (2011). Four-Point Probe Resistivity Measurements on Polycrystalline Thin Films and Complex Metallic Alloy Coatings. E-MRS Spring Meeting 2011, Nizza, Frankreich, EU. http://hdl.handle.net/20.500.12708/129223 ( reposiTUm)

Hell, J., Chirtoc, M., Eisenmenger-Sittner, C., Kijamnajsuk, P., Kitzmantel, M., Neubauer, E., & Zellhofer, K. (2011). Interface modifications in the Cu-Diamond system. 15th International Conference on Thin Films (ICTF 15), Kyoto, Non-EU. http://hdl.handle.net/20.500.12708/129226 ( reposiTUm)

Eisenmenger-Sittner, C., Hell, J., Keding, M., & Schmid, G. (2011). Assessment of the requirements for PVD systems for coating granular materials. 15th International Conference on Thin Films (ICTF 15), Kyoto, Non-EU. http://hdl.handle.net/20.500.12708/129227 ( reposiTUm)

Kijamnajsuk, P., Chirtoc, M., Horny, N., Pelzl, J., Schäfer, D., & Eisenmenger-Sittner, C. (2011). Experimental Evidence Of Laterally Inhomogeneous Thermal Interface Resistance In Copper Coated Carbon Samples. 16th International Conference on Photoacoustic and Photothermal Phenomena (16th ICPPP), Merida, Mexico, Non-EU. http://hdl.handle.net/20.500.12708/129228 ( reposiTUm)

Kijamnajsuk, P., Chirtoc, M., Möller, M., Schäfer, D., Eisenmenger-Sittner, C., Spoddig, D., Meckenstock, R., & Pelzl, J. (2011). Thermal interface resistance of metal films on insulator and semi-conductor substrates measured by thermal wave techniques. DPG Frühjahrstagung 2011, Dresden, EU. http://hdl.handle.net/20.500.12708/129222 ( reposiTUm)

Horkel, M., Eisenmenger-Sittner, C., Quirchmair, M., VanAeken, K., Depla, D., Mahieu, S., & Leroy, W. P. (2010). Determination of the nascent angular distribution of sputtered particles during reactive and non-reactive magnetron sputtering. 18th International Vacuum Congress (IVC-18), Beijing/China, Non-EU. http://hdl.handle.net/20.500.12708/128379 ( reposiTUm)

Zellhofer, K., Hell, J., Schäfer, D., Eisenmenger-Sittner, C., Neubauer, E., Puchner, S., & Hutter, H. (2010). PULL-OFF TEST-, SEM-, AFM-, SIMS- AND HEAT-STAGE ESEM INVESTIGATION OF SPUTTER DEPOSITED BORON- AND METAL DOPED BORON INTERLAYER IN THE Cu-C SYSTEM. 13th Joint Vacuum Conference, Strbske Pleso/Slovakia, EU. http://hdl.handle.net/20.500.12708/128378 ( reposiTUm)

Eisenmenger-Sittner, C., Hell, J., Zellhofer, K., Neubauer, E., & Kitzmantel, M. (2010). Grenzflächenmodifikation in Kupfer-Diamant Kompositen als Mittel zur Beeinflussung der mechanischen und thermischen Eigenschaften (The effect of interface modification on the mechanical and thermal properties of Copper Diamond composites). 1st Austrian Symposium on Carbon Based Coatings, Leoben, Österreich, Austria. http://hdl.handle.net/20.500.12708/128384 ( reposiTUm)

Horkel, M., Eisenmenger-Sittner, C., Mathé, J., Eder, A., Beniaminov, R., & Zawrel, R. (2010). Determination of the thickness and the refraction index of dielectric thin films with spatial resolution using optical consumer electronic components. 18th International Vacuum Congress (IVC-18), Beijing/China, Non-EU. http://hdl.handle.net/20.500.12708/128383 ( reposiTUm)

Eisenmenger-Sittner, C., Horkel, M., VanAeken, K., Mahieu, S., Leroy, E., & Depla, D. (2009). Experimental and theoretical determination of the particle flux for magnetron sputtering. IUVSTA Highlight Seminar, Urbana, Illinois, USA, Non-EU. http://hdl.handle.net/20.500.12708/127574 ( reposiTUm)

Eisenmenger-Sittner, C., & Edtmaier, C. (2008). Coatings technology for brazing and processing of C-reinforced copper and silver MMCs for heat sinks. Hannover Messe 2008, Hannover, EU. http://hdl.handle.net/20.500.12708/97749 ( reposiTUm)

VanAeken, K., Mahieu, S., Horkel, M., Aranda-Gonzalvo, Y., Depla, D., & Eisenmenger-Sittner, C. (2008). MC-simulation of the metallic flux during magnetron sputtering. 11th International Conference on Plasma Surface Engineering (PSE), Garmisch-Partenkirchen/D, EU. http://hdl.handle.net/20.500.12708/127357 ( reposiTUm)

Eisenmenger-Sittner, C., Horkel, M., VanAeken, K., Mahieu, S., & Depla, D. (2008). Angular Resolved Determination Of The Particle Flux Towards A Substrate For Magnetron Sputteruing. 14th International Conference on Thin Films & Reactive Sputter Deposition, Ghent, Belgien, EU. http://hdl.handle.net/20.500.12708/127355 ( reposiTUm)

Horkel, M., Mahr, H., Hell, J., Eisenmenger-Sittner, C., & Neubauer, E. (2008). Determination Of The Thickness Of Metal Coatings On Granular Diamond Materials By Spatially Resolved Optical Methods. 12 th Joint Vacuum Conference, 10 th European Vacuum Conference, 7 th Annual Meeting of the German Vacuum Society, Balatonalmadi/Ungarn, EU. http://hdl.handle.net/20.500.12708/127165 ( reposiTUm)

Schäfer, D., Hell, J., Eisenmenger-Sittner, C., & Neubauer, E. (2008). SUPPRESSION OF DE-WETTING OF COPPER COATINGS ON CARBON SUBSTRATES BY METAL (Cr, Mo, Ti) DOPED BORON INTERLAYERS. 12 th Joint Vacuum Conference, 10 th European Vacuum Conference, 7 th Annual Meeting of the German Vacuum Society, Balatonalmadi/Ungarn, EU. http://hdl.handle.net/20.500.12708/127164 ( reposiTUm)

Steiner, H., Eisenmenger-Sittner, C., & Schwarz, B. (2007). Temperature Induced Recrystallization of Copper Coatings Deposited on Adhesion Promoting Molybdenum Interlayers. International Vacuum Congress 16, IVC-17, Stockholm, Schweden, EU. http://hdl.handle.net/20.500.12708/126553 ( reposiTUm)

Schwarz, B., Worbs, P., & Eisenmenger-Sittner, C. (2007). Applications of a High Temperature Sessile Drop Device. International Vacuum Congress 16, IVC-17, Stockholm, Schweden, EU. http://hdl.handle.net/20.500.12708/126552 ( reposiTUm)

Puchner, S., Hutter, H., & Eisenmenger-Sittner, C. (2007). TOF-SIMS Investigations on thermal treated CuMo-Surfaces on a C-Substrate. 14. Tagung Festkörperanalytik (FKA 14), Wien, Austria. http://hdl.handle.net/20.500.12708/97704 ( reposiTUm)

Eisenmenger-Sittner, C., & Böhm, H. J. (2007). Contributions to Process Development, Modelling and Testing of ExtreMaterials. 2nd KMM-NoE Integration Conference, Wien, Austria. http://hdl.handle.net/20.500.12708/92404 ( reposiTUm)

Kiniger, M., Eisenmenger-Sittner, C., Hell, J., Schwarz, B., Hutter, H., & Puchner, S. (2007). Carbide Formation upon Heat Treatment of Molybdenum Layers Deposited on Carbon Substrates: Comparison of Experimental Data with a Cellular Automaton Model. 12th European Conference on Applications of Surface and Interface Analysis, ECASIA 07, Stockholm, Schweden, EU. http://hdl.handle.net/20.500.12708/126556 ( reposiTUm)

Vollnhofer, W., Eisenmenger-Sittner, C., Hell, J., Kiniger, M., Schwarz, B., Steiner, H., & Tomastik, C. (2007). The Influence of Temperature Treatment and Carbon Addition on the Surface Morphology and the Surface Energy of Molybdenum Layers on Carbon Substrates. 12th European Conference on Applications of Surface and Interface Analysis, ECASIA 07, Stockholm, Schweden, EU. http://hdl.handle.net/20.500.12708/126554 ( reposiTUm)

Mayerhofer, K. E., Schwarz, B., Eisenmenger-Sittner, C., & Hutter, H. (2006). Influence of Sn wetting layers on the oxidation behavior of Al sputter deposits. 13. Tagung Festkörperanalytik, Chemnitz, Austria. http://hdl.handle.net/20.500.12708/97223 ( reposiTUm)

Eisenmenger-Sittner, C., Schwarz, B., Neubauer, E., Eiper, E., & Keckes, J. (2006). ADHESION IMPROVEMENT OF COPPER (Cu) ON CARBON (C) BY PLASMA TREATMENT AND MOLYBDENUM (Mo) INTERLAYERS. International Conference Metallurgical Coatings and Thin Films 2006 - ICMCTF’06, San Diego / Californien, Non-EU. http://hdl.handle.net/20.500.12708/126013 ( reposiTUm)

Hell, J., Neubauer, E., & Eisenmenger-Sittner, C. (2006). Construction, setup and characterisation of a sputterdeposition-system for granular material. 11th Joint Vacuum Conference (JVC 11), Prag/CZ, EU. http://hdl.handle.net/20.500.12708/126014 ( reposiTUm)

Schwarz, B., Eisenmenger-Sittner, C., & Steiner, H. (2006). CONSTRUCTION OF A HIGH TEMPERATURE SESSILE DROP DEVICE. 11th Joint Vacuum Conference (JVC 11), Prag/CZ, EU. http://hdl.handle.net/20.500.12708/126015 ( reposiTUm)

Eisenmenger-Sittner, C., Schwarz, B., Hell, J., & Neubauer, E. (2006). Application of Vacuum Based Processes for the Production of Metal Matrix Composites. IUVSTA SPECIAL SYMPOSIUM, Seoul / Südkorea, Non-EU. http://hdl.handle.net/20.500.12708/126016 ( reposiTUm)

Eisenmenger-Sittner, C., Neubauer, E., Schrank, C., & Schwarz, B. (2006). PVD FILM GROWTH, WETTING AND ADHESION ON DISORDERED SURFACES AND COMPLEXLY SHAPED BODIES. Workshop on Reactive Sputter Deposition, Ghent, Belgien, EU. http://hdl.handle.net/20.500.12708/126208 ( reposiTUm)

Eisenmenger-Sittner, C. (2005). Vakuumbasierte Verfahren als Hilfsmittel zur Herstellung von Kompositmaterialien. Seminar Institut für Allgemeine Physik (IAP), TU Wien, Austria. http://hdl.handle.net/20.500.12708/125289 ( reposiTUm)

Schwarz, B., Eisenmenger-Sittner, C., Klein, C., Tomastik, C., Mayerhofer, K. E., Barna, P. B., & Kovac, A. (2005). Passivation of Al-surfaces against oxidation by monoatomic Sn wetting layers. European Materials Research Society Spring Meeting 2005, E-MRS 2005 Spring Meeting, Strassburg/ Frankreich, Non-EU. http://hdl.handle.net/20.500.12708/125695 ( reposiTUm)

Eisenmenger-Sittner, C., Schwarz, B., Tomastik, C., Barna, P. B., & Kovács, A. (2005). Experimental studies of solid state surface wetting of tin (Sn) on aluminium (Al). International Conference on Thin Films 13, ICTF-13, Stockholm/ Schweden, EU. http://hdl.handle.net/20.500.12708/125690 ( reposiTUm)

Eisenmenger-Sittner, C. (2005). Beschichtung von neuen und Alternativen Werkstoffen. Arbeitskreis Oberflächentechnologie/ Informationsbörse, Bundesministerium für Wirtschaft und Arbeit, Austria. http://hdl.handle.net/20.500.12708/125691 ( reposiTUm)

Eisenmenger-Sittner, C. (2005). Vakuumbasierte Verfahren als Hilfsmittel zur Herstellung von Kompositmaterialien. Seminar Institut für Allgemeine Physik, TU Wien, Institut für Allgemeine Physik, Austria. http://hdl.handle.net/20.500.12708/125677 ( reposiTUm)

Neubauer, E., Eisenmenger-Sittner, C., Schrank, C., Bangert, H., & Korb, G. (2005). The influence of argon and nitrogen RF plasma pre-treatment on the adhesion strength of PVD copper coatings. European Materials Research Society Spring Meeting 2005, E-MRS 2005 Spring Meeting, Strassburg/ Frankreich, Non-EU. http://hdl.handle.net/20.500.12708/125694 ( reposiTUm)

Eisenmenger-Sittner, C., Schrank, C., Neubauer, E., Eiper, E., & Keckes, J. (2005). Modification of wetting of Copper (Cu) on Carbon (C) by plasma treatment and Molybdenum (Mo) interlayers. International Conference on Thin Films 13, ICTF-13, Stockholm/ Schweden, EU. http://hdl.handle.net/20.500.12708/125692 ( reposiTUm)

Satz, A., Hébert, C., Eisenmenger-Sittner, C., & Schattschneider, P. (2005). P-FKP41: Lifetime of Hot Electrons in Palladium. 55. Jahrestagung der Österreichischen Physikalischen Gesellschaft, Wien, Austria. http://hdl.handle.net/20.500.12708/125653 ( reposiTUm)

Stöger-Pollach, M., Schattschneider, P., Eyidi, D., Walter, T., Galek, T., Winkelmann, H., & Eisenmenger-Sittner, C. (2005). METEOR WP5 - Materials characterization: latest results. Final METEOR meeting, Leuven/ Belgien, EU. http://hdl.handle.net/20.500.12708/125774 ( reposiTUm)

Jäger, A., Lackner, R., Eisenmenger-Sittner, C., & Blab, R. (2004). Identification of Microstructural Components of Bitumen by Means of Atomic Force Microscopy (AFM). Tagung der Gesellschaft für Angewandte Mathematik und Mechanik, GAMM2004, Dresden, Deutschland, Austria. http://hdl.handle.net/20.500.12708/125229 ( reposiTUm)

Eisenmenger-Sittner, C., Klein, E., Schwarz, B., Tomastik, C., Barna, P. B., & Kovács, A. (2004). SOLID STATE SURFACE WETTING OF TIN ON ALUMINIUM UNDER UHV CONDITIONS. Joint Vacuum Conference 10, JVC-10, Portoroz, Slovenien, Austria. http://hdl.handle.net/20.500.12708/125099 ( reposiTUm)

Klein, E., Schwarz, B., Eisenmenger-Sittner, C., & Tomastik, C. (2004). THE INITIAL STATES OF WETTING AND SPREADING OF SN ON. Joint Vacuum Conference 10, JVC-10, Portoroz, Slovenien, Austria. http://hdl.handle.net/20.500.12708/125102 ( reposiTUm)

Klein, E., Schwarz, B., Eisenmenger-Sittner, C., Tomastik, C., & Kovács, A. (2004). PASSIVATION OF ALUMINIUM (Al) SURFACES AGAINST OXIDATION BY A MONOATOMIC TIN (Sn) WETTING LAYER. International Vacuum Congress 16, IVC-16, Venedig, Italien, Austria. http://hdl.handle.net/20.500.12708/125096 ( reposiTUm)

Eisenmenger-Sittner, C., Klein, E., Schwarz, B., Tomastik, C., & Misjak, F. (2004). MECHANISMS OF SOLID STATE SURFACE WETTING OF TIN (Sn) ON ALUMINIUM (Al) UNDER UHV CONDITIONS. International Vacuum Congress 16, IVC-16, Venedig, Italien, Austria. http://hdl.handle.net/20.500.12708/125095 ( reposiTUm)

Armelao, L., Eisenmenger-Sittner, C., Gross, S., Ravazzolo, A., Sada, C., Schubert, U., Tondello, E., & Zattin, A. (2004). Zirconium and hafnium oxodusters as molecular building blocks for highly dispersed Zr02 or HfO2 nanoparticles in silica matrix. 7th Int. Conference on Nanostructured Materials, Wiesbaden, Austria. http://hdl.handle.net/20.500.12708/96477 ( reposiTUm)

Schwarz, B., Schrank, C., Eisenmenger-Sittner, C., Stöger-Pollach, M., Rosner, M., & Neubauer, E. (2004). Molybdenum interlayers as adhesion promotors for thin copper films on plasma treated glassy carbon. Joint Vacuum Conference 10, JVC-10, Portoroz, Slovenien, Austria. http://hdl.handle.net/20.500.12708/125100 ( reposiTUm)

Schrank, C., Schwarz, B., Eisenmenger-Sittner, C., & Neubauer, E. (2004). RECRYSTALLIZATION INDUCED DE-WETTING OF COPPER-COATINGS FROM CARBON SURFACES STUDIED BY AFM AND TEM. International Vacuum Congress 16, IVC-16, Venedig, Italien, Austria. http://hdl.handle.net/20.500.12708/125097 ( reposiTUm)

Schrank, C., Schwarz, B., Eisenmenger-Sittner, C., Mayerhofer, K. E., & Neubauer, E. (2004). INFLUENCE OF THERMAL TREATMENT ON THE ADHESION OF COPPER COATINGS ON CARBON SUBSTRATES. Joint Vacuum Conference 10, JVC-10, Portoroz, Slovenien, Austria. http://hdl.handle.net/20.500.12708/125101 ( reposiTUm)

Schwarz, B., Schrank, C., Eisenmenger-Sittner, C., Stöger-Pollach, M., Rosner, M., & Neubauer, E. (2004). ADHESION PROMOTION OF COPPER-COATINGS TO CARBON SURFACES BY PLASMA PRE TREATMENT AND MOLYBDENUM INTERLAYERS. International Vacuum Congress 16, IVC-16, Venedig, Italien, Austria. http://hdl.handle.net/20.500.12708/125098 ( reposiTUm)

Werner, W. S. M., Eisenmenger-Sittner, C., Zemek, J., & Jiricek, P. (2003). Scattering angle dependence of the surface excitation probability in reflection electron energy loss spectra. Int. Conf. on Electron Spectroscopy and Structure (ICESS-9), Uppsala/Schweden, Austria. http://hdl.handle.net/20.500.12708/124418 ( reposiTUm)

Neubauer, E., Smid, I., Kladler, G., Korb, G., Eisenmenger-Sittner, C., & Bangert, H. (2003). The Influence of Alloying Elements (Cr and Ti) on the Thermal and Mechanical Characteristics of Copper-Carbon Composites based on Coated Carbon Fibers. PM2TEC 2003, Las Vegas/USA, Austria. http://hdl.handle.net/20.500.12708/124245 ( reposiTUm)

Rosner, M., Neubauer, E., Eisenmenger-Sittner, C., Bangert, H., & Hutter, H. (2003). Characterization of the interface of sputter deposited copper coatings on nitrogen plasma treated carbon substrates. 12. Festkörperanalytiktagung 2003, Wien/Österreich, Austria. http://hdl.handle.net/20.500.12708/124241 ( reposiTUm)

Eisenmenger-Sittner, C. (2003). METALLISCHE SCHICHTEN FÜR GLEITLAGER. Coating Workshop, Leoben/Österreich, Austria. http://hdl.handle.net/20.500.12708/124242 ( reposiTUm)

Neubauer, E., Korb, G., Eisenmenger-Sittner, C., & Bangert, H. (2003). Interface Optimisation in the Copper-Carbon System. DIS´03 - International Workshop on Designing of Interfacial Structures in Advanced Materials and their Joints, Wien, Österreich, Austria. http://hdl.handle.net/20.500.12708/124311 ( reposiTUm)

Dietzel, D., Chotikaprakhan, S., Bangert, H., & Eisenmenger-Sittner, C. (2003). Thermoreflectance microscopy of Cu coatings on Carbon. EUROMAT 2003, Lausanne, Switzerland, Non-EU. http://hdl.handle.net/20.500.12708/124247 ( reposiTUm)

Neubauer, E., Korb, G., Eisenmenger-Sittner, C., Bangert, H., Chotikaprakhan, S., Dietzel, D., Mansanares, A. M., & Bein, B. K. (2003). The Influence of Tailored Interfaces on the Mechanical Adhesion Strength and the Thermal Contact Resistance of Copper PVD coatings on Carbon Substrates. EUROMAT 2003, Lausanne, Switzerland, Non-EU. http://hdl.handle.net/20.500.12708/124248 ( reposiTUm)

Dietzel, D., Chotikaprakhan, S., Bangert, H., & Eisenmenger-Sittner, C. (2003). Cu coatings on carbon - Effects of plasma processing analysed by means of thermoreflectance microscopy. 14th  International Colloquium on Plasma Processes - CIP 2003, Antibes/Frankreich, Austria. http://hdl.handle.net/20.500.12708/124246 ( reposiTUm)

Dietzel, D., Chotikaprakhan, S., Bangert, H., Eisenmenger-Sittner, C., Neubauer, E., Bein, B. K., & Pelzl, J. (2003). Thermische Charakterisierung von Kupferbeschichtungen im Kupfer-Kohlenstoff-Verbund mittels modulierter Thermoreflexion. Verbundwerkstofftagung 2003, Wien, Österreich, Austria. http://hdl.handle.net/20.500.12708/124310 ( reposiTUm)

Eisenmenger-Sittner, C., Neubauer, E., Bangert, H., & Thomastik, C. (2003). Einsatz von PVD Beschichtungsverfahren zur Steigerung der Haftung von Cu Schichten auf Kohlenstoff für die Herstellung von Cu-C-MMCs. Verbundwerkstofftagung 2003, Wien, Österreich, Austria. http://hdl.handle.net/20.500.12708/124309 ( reposiTUm)

Neubauer, E., Eisenmenger-Sittner, C., Bangert, H., Korb, G., Chotikaprakhan, S., Dietzel, D., Mansanares, A. M., & Bein, B. K. (2003). Korrelation zwischen thermischen und mechanischen Grenzflächeneigenschaften in Kupfer-Kohlenstoffsystemen. Verbundwerkstofftagung 2003, Wien, Österreich, Austria. http://hdl.handle.net/20.500.12708/124308 ( reposiTUm)

Neubauer, E., Korb, G., Eisenmenger-Sittner, C., & Bangert, H. (2003). Optimierung der Grenzfläche in Kupfer-Kohlefaserverbundwerkstoffen. ASMET, Leoben/Österreich, Austria. http://hdl.handle.net/20.500.12708/124244 ( reposiTUm)

Armelao, L., Eisenmenger-Sittner, C., Gross, S., Sada, C., Schubert, U., & Tondello, E. (2003). Zirconium and hafnium oxoclusters as molecular building block for highly dispersed ZrO₂ or HfO₂ nanoparticles in silica matrix. Euro Nano Forum 2003, Triest/Italien, Austria. http://hdl.handle.net/20.500.12708/124249 ( reposiTUm)

Hébert, C., Eisenmenger-Sittner, C., & Schattschneider, P. (2003). Application of the Virtual Crystal Approximation to Elnes Calculations: The Cu L₃ Edge in Cuni Alloys. 6th Multinational Congress on Microscopy - European Extension, Pula, Croatia, Austria. http://hdl.handle.net/20.500.12708/124251 ( reposiTUm)

Neubauer, E., Eisenmenger-Sittner, C., Bangert, H., Korb, G., & Thomastik, C. (2003). AFM AND AUGER INVESTIGATIONS OF AS-DEPOSITED AND HEAT TREATED COPPER COATINGS ON GLASSY CARBON SURFACES WITH CHROMIUM AND MOLYBDENUM INTERMEDIATE LAYERS. E-MRS Spring Meeting 2003, Strassbourg/Frankreich, Austria. http://hdl.handle.net/20.500.12708/124238 ( reposiTUm)

Eisenmenger-Sittner, C., Schrank, C., Neubauer, E., Bangert, H., & Bergauer, A. (2003). SOLID STATE DE-WETTING OBSERVED FOR VAPOR DEPOSITED COPPER FILMS ON CARBON SUBSTRATES. EVC 8, Berlin/Deutschland, Austria. http://hdl.handle.net/20.500.12708/124239 ( reposiTUm)

Eisenmenger-Sittner, C., Schrank, C., Neubauer, E., Bangert, H., & Bergauer, A. (2003). SOLID STATE DE-WETTING OF VAPOR DEPOSITED FILMS ON PLANAR AND FIBER-SHAPED CARBON SUBSTRATES. E-MRS Spring Meeting 2003, Strassbourg/Frankreich, Austria. http://hdl.handle.net/20.500.12708/124237 ( reposiTUm)

Schwarz, B., Schrank, C., Eisenmenger-Sittner, C., & Bangert, H. (2003). Thermisch induzierte Entnetzung von Kupferschichten auf Kohlenstoff. 12. Festkörperanalytiktagung 2003, Wien/Österreich, Austria. http://hdl.handle.net/20.500.12708/124243 ( reposiTUm)

Eisenmenger-Sittner, C., Bangert, H., Joo, H. Y., Barna, P. B., & Kovács, A. (2003). Lamellares Wachstum in Al-Sn-Al Sandwich-Schichten. FKA 12, Wien/Österreich, Austria. http://hdl.handle.net/20.500.12708/124240 ( reposiTUm)

Eisenmenger-Sittner, C., Bangert, H., Tomastik, C., Barna, P. B., Kovács, A., & Misiak, F. (2002). SOLID STATE DIFFUSION OF Sn IN POLYCYRSTALLINE Al FILMS. 12th International Conference on thin Films, Bratislava, Slovakia, Austria. http://hdl.handle.net/20.500.12708/123594 ( reposiTUm)

Eisenmenger-Sittner, C., Bangert, H., Bergauer, A., Brenner, J., Störi, H., & Barna, P. B. (2002). SOLID STATE WETTING AND SPREADING OF TIN (Sn) ON ALUMINIUM INTERFACES. 9th Joint Vacuum Conference, Graz, Austria, Austria. http://hdl.handle.net/20.500.12708/123593 ( reposiTUm)

Barna, P. B., Kovács, A., Misiak, F., Eisenmenger-Sittner, C., Bangert, H., & Tomastik, C. (2002). CO-DEPOSITING Sn CONTROLS THE GROWTH OF Al FILMS AS SURFACTANT. 12th International Conference on thin Films, Bratislava, Slovakia, Austria. http://hdl.handle.net/20.500.12708/123595 ( reposiTUm)

Meinschad, Th., Streli, C., Wobrauschek, P., & Eisenmenger-Sittner, C. (2002). A WINDOWLESS SI ANODE X-RAY TUBE WITH FINEFOCUS FOR THE EFFICIENT EXCITATION OF LOW Z ELEMENTS ON SI WAFER SURFACES WITH TXRF. Total X-Ray Fluorescence and Analysis, Funchal, Portugal, Austria. http://hdl.handle.net/20.500.12708/123603 ( reposiTUm)

Meinschad, Th., Streli, C., Wobrauschek, P., & Eisenmenger-Sittner, C. (2002). A NEW WINDOWLESS SI ANODE FINE FOCUS X-RAY TUBE FOR THE MORE EFFICIENT EXCITATION OF LOW Z ELEMENTS IN TXRF. Denverx-Ray Conference, Colorado Springs, USA, Austria. http://hdl.handle.net/20.500.12708/123602 ( reposiTUm)

Meinschad, Th., Streli, C., Wobrauschek, P., & Eisenmenger-Sittner, C. (2002). A windowless high power diffraction tube with Si anode for the efficient excitation of low Z elements for TXRF. European Conference on Energy Dispersive X-Ray Spectrometry, Berlin, Deutschland, Austria. http://hdl.handle.net/20.500.12708/123601 ( reposiTUm)

Neubauer, E., Korb, G., Eisenmenger-Sittner, C., Bangert, H., Chotikaprakhan, S., Dietzel, D., Mansanares, A. M., & Bein, B. K. (2002). THE INFLUENCE OF MECHANICAL ADHESION OF COPPER COATINGS ON CARBON SURFACES ON THE INTERFACIAL THERMAL CONTACT RESISTANCE. 12th International Conference on thin Films, Bratislava, Slovakia, Austria. http://hdl.handle.net/20.500.12708/123597 ( reposiTUm)

Neubauer, E., Korb, G., Eisenmenger-Sittner, C., & Bangert, H. (2002). AFM AND AUGER INVESTIGATIONS OF AS-DEPOSITED AND HEAT TREATED COPPER COATINGS ON GLASSY CARBON SURFACES WITH DIFFERENT INTERMEDIATE LAYERS. 9th Joint Vacuum Conference, Graz, Austria, Austria. http://hdl.handle.net/20.500.12708/123596 ( reposiTUm)

Eisenmenger-Sittner, C., & Neubauer, E. (2002). Cu coated carbon fibres. http://hdl.handle.net/20.500.12708/31830 ( reposiTUm)

Eisenmenger-Sittner, C., & Bangert, H. (2002). Strukturentwicklung von Al-Sn Sputterschichten. http://hdl.handle.net/20.500.12708/31829 ( reposiTUm)

Eisenmenger-Sittner, C. (2001). Fundamentals of multicomponent film deposition [Professorial Dissertation, Technische Universität Wien]. reposiTUm. http://hdl.handle.net/20.500.12708/179337 ( reposiTUm)