Vida, C., Lukacevic, M., Pech, S., & Füssl, J. (2025). Strength distribution predictions of glued laminated timber beams: Influence of size, load configuration, and strength class described by the finite weakest-link theory. Construction and Building Materials, 458, 1–16. https://doi.org/10.1016/j.conbuildmat.2024.139514 ( reposiTUm)

Brandstätter, F., Senoner, M., Lukacevic, M., Autengruber, M., Truskaller, M., Grüll, G., & Füssl, J. (2025). Investigation of cyclic water infiltration and dry-out in coated spruce using finite-element simulations. Wood Science and Technology, 59(1), Article 25. https://doi.org/10.1007/s00226-025-01629-7 ( reposiTUm)

Senk, V., Ghazanfari, M., Rasoulzadeh, S., Vasylevska, K., Kovacs, B. I., Mortezapoor, S., Vonach, E., Kovacic, I., Füssl, J., Kaufmann, H., & Königsberger, M. (2025). HeXA: Haptic-enhanced eXtended reality framework for material-informed Architectural design. Journal of Building Engineering, 108, Article 112707. https://doi.org/10.1016/j.jobe.2025.112707 ( reposiTUm)

Brandstätter, F., Autengruber, M., Lukacevic, M., & Füssl, J. (2024). The influence of geographical location on moisture distribution in wood cross sections: a numerical simulation study using Austria as an example. Journal of Wood Science, 70(1), 1–16. https://doi.org/10.1186/s10086-024-02147-z ( reposiTUm)

Königsberger, M., Senk, V., Lukacevic, M., Wimmer, M., & Füssl, J. (2024). Micromechanics stiffness upscaling of plant fiber-reinforced composites. COMPOSITES PART B-ENGINEERING, 281, 1–20. https://doi.org/10.1016/j.compositesb.2024.111571 ( reposiTUm)

Reismüller, R., Lukacevic, M., Pech, S., Jäger, A., & Füssl, J. (2024). Calibrating failure surfaces for vertically perforated clay block masonry using a validated numerical unit cell model. EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, 106, Article 105295. https://doi.org/10.1016/j.euromechsol.2024.105295 ( reposiTUm)

Li, M., Shen, B., Wang, S., Dai, X., Dong, L., Füssl, J., Eberhardsteiner, J., & Atluri, S. N. (2024). An Explicit Updated Lagrangian Fragile Points Method for Dynamic Fracture Simulations. Engineering Fracture Mechanics, 295, Article 109809. https://doi.org/10.1016/j.engfracmech.2023.109809 ( reposiTUm)

Pech, S., Autengruber, M., Lukacevic, M., Lackner, R., & Füssl, J. (2024). Evaluation of moisture-induced stresses in wood cross-sections determined with a time-dependent, plastic material model during long-time exposure. Buildings, 14(4), Article 937. https://doi.org/10.3390/buildings14040937 ( reposiTUm)

Schwaighofer, M., Königsberger, M., Zelaya-Lainez, L., Lukacevic, M., Serna-Loaiza, S., Harasek, M., Zikeli, F., Friedl, A., & Füssl, J. (2024). The viscoelastic behavior of lignin: quantification through nanoindentation relaxation testing on hot-pressed technical lignin samples from various origins. Mechanics of Materials, 188, Article 104864. https://doi.org/10.1016/j.mechmat.2023.104864 ( reposiTUm)

Ikeda, K., Belevich, I., Zelaya-Lainez, L., Orel, L., Füssl, J., Gumulec, J., Hellmich, C., Jokitalo, E., & Raible, F. (2024). Dynamic microvilli sculpt bristles at nanometric scale. Nature Communications, 15(1), Article 3733. https://doi.org/10.1038/s41467-024-48044-3 ( reposiTUm)

Brandstätter, F., Autengruber, M., Lukacevic, M., & Füssl, J. (2023). Prediction of Moisture-Induced Cracks in Wooden Cross Sections Using Finite Element Simulations. Wood Science and Technology, 57, 671–701. https://doi.org/10.1007/s00226-023-01469-3 ( reposiTUm)

Rasoulzadeh, S., Senk, V., Königsberger, M., Reisinger, J., Kovacic, I., Füssl, J., & Wimmer, M. (2023). A Novel Integrative Design Framework Combining 4D Sketching, Geometry Reconstruction, Micromechanics Material Modelling, and Structural Analysis. Advanced Engineering Informatics, 57, Article 102074. https://doi.org/10.1016/j.aei.2023.102074 ( reposiTUm)

Buchner, T., Königsberger, M., Gaggl, W., Früh, G., Kiefer, T., & Füssl, J. (2023). A continuum micromechanics model challenged to predict thermo-mechanical properties of 18 different clay bricks and sensitivity analysis revealing effects of compositional and microstructural features. Construction and Building Materials, 403, Article 132601. https://doi.org/10.1016/j.conbuildmat.2023.132601 ( reposiTUm)

Eberhardsteiner, J., Pech, S., Autengruber, M., Vida, C., Lukacevic, M., Königsberger, M., & Füssl, J. (2023). Numerical Modeling in Timber Engineering – Moisture Transport and Quasi-Brittle Failure. Rad Hrvatske Akademije Znanosti i Umjetnosti. Tehničke Znanosti, 23, 61–90. https://doi.org/10.21857/yvjrdcvgjy ( reposiTUm)

Reismüller, R., Königsberger, M., Jäger, A., & Füssl, J. (2023). The performance of vertically perforated clay block masonry in fire tests predicted by a finite-element model including an energy-based criterion to identify spalling. Fire Safety Journal, 135, Article 103729. https://doi.org/10.1016/j.firesaf.2022.103729 ( reposiTUm)

Königsberger, M., Lukacevic, M., & Füssl, J. (2023). Multiscale micromechanics modeling of plant fibers: upscaling of stiffness and elastic limits from cellulose nanofibrils to technical fibers. Materials and Structures, 56(1), Article 13. https://doi.org/10.1617/s11527-022-02097-2 ( reposiTUm)

Vida, C., Lukacevic, M., Hochreiner, G., & Füssl, J. (2023). Size Effect on Bending Strength of Glued Laminated Timber Predicted by a Numerical Simulation Concept Including Discrete Cracking. Materials & Design, 225, Article 111550. https://doi.org/10.1016/j.matdes.2022.111550 ( reposiTUm)

Schwaighofer, M., Zelaya-Lainez, L., Königsberger, M., Lukacevic, M., Serna-Loaiza, S., Harasek, M., Lahayne, O., Senk, V., & Füssl, J. (2023). Characterization of Mechanical Properties of Five Hot-Pressed Lignins Extracted from Different Feedstocks by Microscopy-Aided Nanoindentation. Materials & Design, 227, Article 111765. https://doi.org/10.1016/j.matdes.2023.111765 ( reposiTUm)

Reismüller, R., Lukacevic, M., Pech, S., Jäger, A., & Füssl, J. (2023). A numerical unit cell model for predicting the failure stress state of vertically perforated clay block masonry under arbitrary in-plane loads. Engineering Structures, 293, Article 116557. https://doi.org/10.1016/j.engstruct.2023.116557 ( reposiTUm)

Brandstätter, F., Kalbe, K., Autengruber, M., Lukacevic, M., Kalamees, T., Ruus, A., Annuk, A., & Füssl, J. (2023). Numerical simulation of CLT moisture uptake and dry-out following water infiltration through end-grain surfaces. Journal of Building Engineering, 80, Article 108097. https://doi.org/10.1016/j.jobe.2023.108097 ( reposiTUm)

Zelaya Lainez, L. H., Balduzzi, G., Lahayne, O., Lukacevic, M., Hellmich, C., & Füssl, J. (2023). Micromechanics of non-embedded spruce wood: Novel polishing and indentation protocol. Materials Today: Proceedings, 93(4), 662–668. https://doi.org/10.1016/j.matpr.2023.04.678 ( reposiTUm)

Jauk, J., Vašatko, H., Gosch, L., Ristoski, K., Füssl, J., & Stavric, M. (2023). Coextrusion of clay-Based composites: using a multi-material approach to achieve gradient porosity in 3D-printed ceramics. Ceramics, 6(4), 2243–2255. https://doi.org/10.3390/ceramics6040136 ( reposiTUm)

Hofbauer, C., Serna-Loaiza, S., Irmgard Windisch, Scolari, L., Koyun, A. N., Zelaya-Lainez, L., Füssl, J., Grothe, H., Hirn, U., Friedl, A., & Harasek, M. (2023). Comparison of coupled chemical pretreatment and mechanical refining of spruce sawdust: fiber network properties and initial production of lignin-bonded biocomposites. Biomass Conversion and Biorefinery. https://doi.org/10.1007/s13399-023-03796-8 ( reposiTUm)

Pech, S., Lukacevic, M., & Füssl, J. (2022). A hybrid multi-phase field model to describe cohesive failure in orthotropic materials, assessed by modeling failure mechanisms in wood. Engineering Fracture Mechanics, 271, Article 108591. https://doi.org/10.1016/j.engfracmech.2022.108591 ( reposiTUm)

Wimmer, M., Kovacic, I., Ferschin, P., Rist, F., Hensel, M., Schinegger, K., Rutzinger, S., Kaufmann, H., Kilian, M., Müller, C., Izmestiev, I., Nawratil, G., Füssl, J., Stavric, M., Hahn, D., & Suter, G. (2022). Advanced Computational Design – digitale Methoden für die frühe Entwurfsphase. Bautechnik, 99(10), 720–730. https://doi.org/10.1002/bate.202200057 ( reposiTUm)

Buchner, T., Königsberger, M., Jäger, A., & Füssl, J. (2022). A Validated Multiscale Model Linking Microstructural Features of Fired Clay Brick to its Macroscopic Multiaxial Strength. Mechanics of Materials, 170, Article 104334. https://doi.org/10.1016/j.mechmat.2022.104334 ( reposiTUm)

Vida, C., Lukacevic, M., Eberhardsteiner, J., & Füssl, J. (2022). Modeling Approach to Estimate the Bending Strength and Failure Mechanisms of Glued Laminated Timber Beams. Engineering Structures, 255(113862), 113862. https://doi.org/10.1016/j.engstruct.2022.113862 ( reposiTUm)

Pech, S., Lukacevic, M., & Füssl, J. (2022). A Hybrid Multi-Phase Field Model to Describe Cohesive Failure in Orthotropic Materials, Assessed by Modeling Failure Mechanisms in Wood. Engineering Fracture Mechanics, 271(108591), 108591. https://doi.org/10.1016/j.engfracmech.2022.108591 ( reposiTUm)

Autengruber, M., Lukacevic, M., Eberhardsteiner, J., & Füssl, J. (2022). Computergestützte Modellierung von Feuchtetransportprozessen in Holzwerkstoffen. Bautechnik, 99(10), 781–788. https://doi.org/10.1002/bate.202200045 ( reposiTUm)

Pech, S., Lukacevic, M., & Füssl, J. (2022). Validation of a hybrid multi-phase field model for fracture of wood. Engineering Fracture Mechanics, 275, Article 108819. https://doi.org/10.1016/j.engfracmech.2022.108819 ( reposiTUm)

Lahayne, O., Zelaya-Lainez, L., Buchner, T., Eberhardsteiner, J., & Füssl, J. (2022). Influence of Nanoadditives on the Young’s Modulus of Cement. Materials Today: Proceedings, 62, 2488–2494. https://doi.org/10.1016/j.matpr.2022.02.626 ( reposiTUm)

Zahedi, M., Kazemi Najafi, S., Füssl, J., & Elyasi, M. (2022). Determining elastic constants of poplar wood (Populus deltoides) by ultrasonic waves and its application in the finite element analysis. Wood Material Science and Engineering, 17(6), 668–678. https://doi.org/10.1080/17480272.2021.1925962 ( reposiTUm)

Buchner, T., Kiefer, T., Zelaya-Lainez, L., Gaggl, W., Konegger, T., & Füssl, J. (2021). A Multitechnique, Quantitative Characterization of the Pore Space of Fired Bricks Made of Five Clayey Raw Materials Used in European Brick Industry. Applied Clay Science, 200(105884), 105884. https://doi.org/10.1016/j.clay.2020.105884 ( reposiTUm)

Autengruber, M., Lukacevic, M., Gröstlinger, C., & Füssl, J. (2021). Finite-Element-Based Prediction of Moisture-Induced Crack Patterns for Cross Sections of Solid Wood and Glued Laminated Ttmber Exposed to a Realistic Climate Condition. Construction and Building Materials, 271(121775), 121775. https://doi.org/10.1016/j.conbuildmat.2020.121775 ( reposiTUm)

Buchner, T., Kiefer, T., Gaggl, W., Zelaya-Lainez, L., & Füssl, J. (2021). Automated Morphometrical Characterization of Material Phases of Fired Clay Bricks Based on Scanning Electron Microscopy, Energy Dispersive X-Ray Spectroscopy and Powder X-Ray Diffraction. Construction and Building Materials, 288(122909), 122909. https://doi.org/10.1016/j.conbuildmat.2021.122909 ( reposiTUm)

Suda, R., Kiefer, T., Schranz, C., & Füssl, J. (2021). A Finite-Element-Based Approach to Quantify the Impact of Bed Joint Reinforcement on the Compressive Strength of Vertically Perforated Clay Block Masonry. Engineering Structures, 239(112277), 112277. https://doi.org/10.1016/j.engstruct.2021.112277 ( reposiTUm)

Pech, S., Lukacevic, M., & Füssl, J. (2021). A Robust Multisurface Return-Mapping Algorithm and Its Implementation in Abaqus. Finite Elements in Analysis and Design, 190(103531), 103531. https://doi.org/10.1016/j.finel.2021.103531 ( reposiTUm)

Lukacevic, M., Autengruber, M., Raimer, T., Eberhardsteiner, J., & Füssl, J. (2021). Effect of Cast-In-Place Concrete Application on Moisture Distribution in Timber-Concrete Composite Floors with Notched Connections, Investigated Via Finite Element Simulations. Journal of Building Engineering, 42(103005), 103005. https://doi.org/10.1016/j.jobe.2021.103005 ( reposiTUm)

Autengruber, M., Lukacevic, M., Gröstlinger, C., Eberhardsteiner, J., & Füssl, J. (2021). Numerical Assessment of Wood Moisture Content-Based Assignments to Service Classes in EC5 and a Prediction Concept of Moisture-Induced Stresses Solely Using Relative Humidity Data. Engineering Structures, 245(112849), 112849. https://doi.org/10.1016/j.engstruct.2021.112849 ( reposiTUm)

Buchner, T., Kiefer, T., Königsberger, M., Jäger, A., & Füssl, J. (2021). Continuum micromechanics model for fired clay bricks: Upscaling of experimentally identified microstructural features to macroscopic elastic stiffness and thermal conductivity. Materials & Design, 212(110212), 110212. https://doi.org/10.1016/j.matdes.2021.110212 ( reposiTUm)

Suda, R., Kiefer, T., Schranz, C., & Füssl, J. (2021). A finite-element-based approach to quantify the impact of bed joint reinforcement on the compressive strength of vertically perforated clay block masonry. Engineering Structures, 239, 1–14. https://doi.org/10.1016/j.engstruct.2021.112277 ( reposiTUm)

Buchner, T., Kiefer, T., Königsberger, M., Jäger, A., & Füssl, J. (2021). Continuum micromechanics model for fired clay bricks: Upscaling of experimentally identified microstructural features to macroscopic elastic stiffness and thermal conductivity. Materials & Design, 212, 1–16. https://doi.org/10.1016/j.matdes.2021.110212 ( reposiTUm)

Gerstorfer, D., Forte, T., & Füssl, J. (2021). Experimental and Numerical Determination of the Screw Deformation in Laminated Beech Veneer Lumber as a Result of Moisture‐Induced Swelling. Civil Engineering Design, 3(5–6), 171–178. https://doi.org/10.1002/cend.202100016 ( reposiTUm)

Autengruber, M., Lukacevic, M., Wenighofer, G., Mauritz, R., & Füssl, J. (2021). Finite-element-based concept to predict stiffness, strength, and failure of wood composite I-joist beams under various loads and climatic conditions. Engineering Structures, 245, 1–22. https://doi.org/10.1016/j.engstruct.2021.112908 ( reposiTUm)

Kariem, H., Füssl, J., Kiefer, T., Jäger, A., & Hellmich, C. (2020). The viscoelastic behaviour of material phases in fired clay identified by means of grid nanoindentation. Construction and Building Materials, 231, Article 117066. https://doi.org/10.1016/j.conbuildmat.2019.117066 ( reposiTUm)

Kiefer, T., Füssl, J., Kariem, H., Konnerth, J., Gaggl, W., & Hellmich, C. (2020). A Multi-Scale Material Model for the Estimation of the Transversely Isotropic Thermal Conductivity Tensor of Fired Clay Bricks. Journal of the European Ceramic Society, 40(15), 6200–6217. https://doi.org/10.1016/j.jeurceramsoc.2020.05.018 ( reposiTUm)

Stembera, V., & Füssl, J. (2020). DKMQ24 Shell Element with Improved Membrane Behaviour. Finite Elements in Analysis and Design, 175. http://hdl.handle.net/20.500.12708/140780 ( reposiTUm)

Kariem, H., Kiefer, T., Hellmich, C., Gaggl, W., Steiger-Thirsfeld, A., & Füssl, J. (2020). EDX/XRD-Based Identification of Micrometer-Sized Domains in Scanning Electron Micrographs of Fired Clay. Materials and Structures, 53(109). https://doi.org/10.1617/s11527-020-01531-7 ( reposiTUm)

Autengruber, M., Lukacevic, M., & Füssl, J. (2020). Finite-Element-Based Moisture Transport Model for Wood Including Free Water Above the Fiber Saturation Point. International Journal of Heat and Mass Transfer, 161(120228), 120228. https://doi.org/10.1016/j.ijheatmasstransfer.2020.120228 ( reposiTUm)

Li, M., Füssl, J., Lukacevic, M., Eberhardsteiner, J., & Martin, C. M. (2019). An Algorithm for Adaptive Introduction and Arrangement of Velocity Discontinuities within 3D Finite-Element-Based Upper Bound Limit Analysis Approaches. Computer Methods in Applied Mechanics and Engineering, 348, 875–911. https://doi.org/10.1016/j.cma.2018.12.017 ( reposiTUm)

Li, M., Füssl, J., Lukacevic, M., Martin, C. M., & Eberhardsteiner, J. (2019). Bending Strength Predictions of Cross-Laminated Timber Plates Subjected to Concentrated Loading Using 3D Finite-Element-Based Limit Analysis Approaches. Composite Structures, 220, 912–925. https://doi.org/10.1016/j.compstruct.2019.02.101 ( reposiTUm)

Lukacevic, M., Kandler, G., Hu, M., Olsson, A., & Füssl, J. (2019). A 3D Model for Knots and Related Fiber Deviations in Sawn Timber for Prediction of Mechanical Properties of Boards. Materials & Design, 166(107617), 107617. https://doi.org/10.1016/j.matdes.2019.107617 ( reposiTUm)

Pech, S., Kandler, G., Lukacevic, M., & Füssl, J. (2019). Metamodel Assisted Optimization of Glued Laminated Timber Beams by Using Metaheuristic Algorithms. Engineering Applications of Artificial Intelligence, 79, 129–141. https://doi.org/10.1016/j.engappai.2018.12.010 ( reposiTUm)

Balduzzi, G., Morganti, S., Füssl, J., Aminbaghai, M., Reali, A., & Auricchio, F. (2019). Modeling the non-trival behavior of anisotropic beams: a simple Tomoshenko beam with enhanced stress recovery and constitutive relations. Composite Structures, 229, Article 111265. https://doi.org/10.34726/2504 ( reposiTUm)

Kandler, G., Lukacevic, M., & Füssl, J. (2018). Experimental study on glued laminated timber beams with well-known knot morphology. European Journal of Wood and Wood Products. https://doi.org/10.1007/s00107-018-1328-6 ( reposiTUm)

Kariem, H., Hellmich, C., Kiefer, T., Jäger, A., & Füssl, J. (2018). Micro-CT-based identification of double porosity in fired clay ceramics. Journal of Materials Science. https://doi.org/10.1007/s10853-018-2281-9 ( reposiTUm)

Li, M., Füssl, J., Lukacevic, M., Eberhardsteiner, J., & Martin, C. M. (2018). Strength Predictions of Clear Wood at Multiple Scales Using Numerical Limit Analysis Approaches. Computers and Structures, 196, 200–216. https://doi.org/10.1016/j.compstruc.2017.11.005 ( reposiTUm)

Li, M., Füssl, J., Lukacevic, M., Eberhardsteiner, J., & Martin, C. (2018). A Numerical Upper Bound Formulation with Sensibly-Arranged Velocity Discontinuities and Orthotropic Material Strength Behaviour. Journal of Theoretical and Applied Mechanics, 417. https://doi.org/10.15632/jtam-pl.56.2.417 ( reposiTUm)

Hengl, H. L., Kluger-Eigl, W., Blab, R., & Füssl, J. (2018). Ther Performance of Paving Block Structures with Mortar Filled Joints Under Temperature Loading, Accessed by Means of Numerical Simulations. Road Materials and Pavement Design, 19(7), 1575–1594. https://doi.org/10.1080/14680629.2017.1330221 ( reposiTUm)

Kandler, G., Lukacevic, M., Zechmeister, C., Wolff, S., & Füssl, J. (2018). Stochastic Engineering Framework for Timber Structural Elements and Its Application to Glued Laminated Timber Beams. Construction and Building Materials, 190, 573–592. https://doi.org/10.1016/j.conbuildmat.2018.09.129 ( reposiTUm)

Kandler, G., Lukacevic, M., Wolff, S., & Füssl, J. (2018). Stochastic Engineering Framework for Timber Structural Elements. Beton- Und Stahlbetonbau, 113(S2), 96–102. https://doi.org/10.1002/best.201800055 ( reposiTUm)

Hengl, H. L., Kluger-Eigl, W., Lukacevic, M., Blab, R., & Füssl, J. (2018). Horizontal Deformation Resistance of Paving Block Superstructures - Influence of Paving Block Type, Laying Pattern, and Joint Behaviour. International Journal of Pavement Research and Technology. https://doi.org/10.1016/j.ijprt.2018.08.001 ( reposiTUm)

Balduzzi, G., Aminbaghai, M., Auricchio, F., & Füssl, J. (2018). Planar Timoshenko-like model for multilayer non-prismatic beams. International Journal of Mechanics and Materials in Design. https://doi.org/10.1007/s10999-016-9360-3 ( reposiTUm)

Kiefer, T., Kariem, H., Lukacevic, M., & Füssl, J. (2017). The Compressive Strength of Vertically Perforated Clay Block Masonry Predicted by Means of a Unit-Cell Type Numerical Simulation Tool Taking Discrete Cracking into Account. Construction and Building Materials, 150, 24–34. https://doi.org/10.1016/j.conbuildmat.2017.05.201 ( reposiTUm)

Balduzzi, G., Hochreiner, G., & Füssl, J. (2017). Stress recovery from one dimensional models for tapered bi-symmetric thin-walled I beams: Deficiencies in modern engineering tools and procedures. Thin-Walled Structures, 119, 934–945. https://doi.org/10.1016/j.tws.2017.06.031 ( reposiTUm)

Füssl, J., Li, M., Lukacevic, M., Eberhardsteiner, J., & Martin, C. M. (2017). Comparison of Unit Cell-Based Computational Methods for Predicting the Strength of Wood. Engineering Structures, 141, 427–443. https://doi.org/10.1016/j.engstruct.2017.03.005 ( reposiTUm)

Lukacevic, M., Lederer, W., & Füssl, J. (2017). A Microstructure-Based Multisurface Failure Criterion for the Description of Brittle and Ductile Failure Mechanisms of Clear-Wood. Engineering Fracture Mechanics, 176, 83–99. https://doi.org/10.1016/j.engfracmech.2017.02.020 ( reposiTUm)

Handle, F., Harir, M., Füssl, J., Koyun, A. N., Grossegger, D., Hertkorn, N., Eberhardsteiner, L., Hofko, B., Hospodka, M., Blab, R., Schmitt-Kopplin, P., & Grothe, H. (2017). Tracking Aging of Bitumen and Its Saturate, Aromatic, Resin, and Asphaltene Fractions Using High-Field Fourier Transform Ion Cyclotron Resonance Mass Spectrometry. Energy and Fuels, 31(5), 4771–4779. https://doi.org/10.1021/acs.energyfuels.6b03396 ( reposiTUm)

Kandler, G., & Füssl, J. (2017). A Probabilistic Approach for the Linear Behaviour of Glued Laminated Timber. Engineering Structures, 148, 673–685. https://doi.org/10.1016/j.engstruct.2017.07.017 ( reposiTUm)

Hengl, H. L., Kluger-Eigl, W., Blab, R., & Füssl, J. (2017). The Performance of Paving Block Structures with Mortar Filled Joints under Temperature Loading, Accessed by Means of Numerical Simulations. Road Materials and Pavement Design, 19(7), 1575–1594. https://doi.org/10.1080/14680629.2017.1330221 ( reposiTUm)

Kandler, G., Lukacevic, M., & Füssl, J. (2017). Ein Algorithmus zur Rekonstruktion von 3D Astgeometrien und die Einbettung dieser Information in stochastische Konzepte für Brettschichtholz. ÖIAZ - Österreichische Ingenieur- Und Architektenzeitschrift, 162, 105–112. http://hdl.handle.net/20.500.12708/147881 ( reposiTUm)

Lukacevic, M., Füssl, J., & Eberhardsteiner, J. (2017). Eine numerische Methode zur Beschreibung von Holzversagen - von der Holzzelle bis zu Holzprodukten. ÖIAZ - Österreichische Ingenieur- Und Architektenzeitschrift, 162, 17–24. http://hdl.handle.net/20.500.12708/147879 ( reposiTUm)

Balduzzi, G., Hochreiner, G., Füssl, J., & Auricchio, F. (2017). Serviceability Analysis of Non-Prismatic Timber Beams: Derivation and Validation of New and Effective Straightforward Formulas. Open Journal of Civil Engineering. https://doi.org/10.4236/ojce.2017.71003 ( reposiTUm)

Kandler, G., Lukacevic, M., & Füssl, J. (2016). An Algorithm for the Geometric Reconstruction of Knots within Timber Boards Based on Fibre Angle Measurements. Construction and Building Materials, 124, 945–960. https://doi.org/10.1016/j.conbuildmat.2016.08.001 ( reposiTUm)

Lukacevic, M., & Füssl, J. (2016). Application of a Multisurface Discrete Crack Model for Clear Wood Taking into Account the Inherent Microstructural Characteristics of Wood Cells. Wood Research and Technology, 70(9), 845–853. https://doi.org/10.1515/hf-2015-0162 ( reposiTUm)

Füssl, J., Kluger-Eigl, W., & Blab, R. (2016). Experimental Identification and Mechanical Interpretation of the Interaction Behavior between Concrete Paving Blocks. International Journal of Pavement Engineering, 17(6), 478–488. https://doi.org/10.1080/10298436.2014.993205 ( reposiTUm)

Füssl, J., Kandler, G., & Eberhardsteiner, J. (2016). Application of Stochastic Finite Approaches to Wood-Based Products. Archive of Applied Mechanics, 86(1–2), 89–110. https://doi.org/10.1007/s00419-015-1112-6 ( reposiTUm)

Füssl, J., Hengl, H., Eberhardsteiner, L., Kluger-Eigl, W., & Blab, R. (2016). Numerical Simulation Tool for Paving Block Structures Assessed by Means of Full-Scale Accelerated Pavement Tests. International Journal of Pavement Engineering, 19(10), 917–929. https://doi.org/10.1080/10298436.2016.1224410 ( reposiTUm)

Hengl, H. L., & Füssl, J. (2016). The Influence of Superelevated Profiles of Paving Block Structures on their Load-Bearing Behavior. Engineering Structures, 117, 195–203. https://doi.org/10.1016/j.engstruct.2016.03.003 ( reposiTUm)

Steiner, D., Hofko, B., Hospodka, M., Handle, F., Grothe, H., Füssl, J., Eberhardsteiner, L., & Blab, R. (2016). Towards an optimised lab procedure for long-term oxidative ageing of asphalt mix specimen. International Journal of Pavement Engineering, 17(6), 471–477. https://doi.org/10.1080/10298436.2014.993204 ( reposiTUm)

Hofko, B., Eberhardsteiner, L., Füssl, J., Grothe, H., Handle, F., Hospodka, M., Grossegger, D., Nahar, S. N., Schmets, A. J. M., & Scarpas, A. (2016). Impact of maltene and asphaltene fraction on mechanical behavior and microstructure of bitumen. Materials and Structures, 49(3), 829–841. https://doi.org/10.1617/s11527-015-0541-6 ( reposiTUm)

Handle, F., Füssl, J., Neudl, S., Großegger, D., Eberhardsteiner, L., Hofko, B., Hospodka, M., Blab, R., & Grothe, H. (2016). The bitumen microstructure: a fluorescent approach. Materials and Structures, 49(1–2), 167–180. https://doi.org/10.1617/s11527-014-0484-3 ( reposiTUm)

Balduzzi, G., Aminbaghai, M., Sacco, E., Füssl, J., Eberhardsteiner, J., & Auricchio, F. (2016). Non-prismatic Beams: a Simple and Effective Timoshenko-like Model. International Journal of Solids and Structures. https://doi.org/10.1016/j.ijsolstr.2016.02.017 ( reposiTUm)

Eberhardsteiner, L., Füssl, J., Hofko, B., Handle, F., Hospodka, M., Blab, R., & Grothe, H. (2015). Influence of asphaltene content on mechanical bitumen behavior - Experimental investigation and micromechanical modeling. Materials and Structures, 48(10), 3099–3112. https://doi.org/10.1617/s11527-014-0383-7 ( reposiTUm)

Lukacevic, M., Füssl, J., & Lampert, R. (2015). Failure Mechanisms of Clear Wood Identified at Wood Cell Level by an Approach Based on the Extended Finite Element Method. Engineering Fracture Mechanics, 144, 158–175. https://doi.org/10.1016/j.engfracmech.2015.06.066 ( reposiTUm)

Füssl, J., Kluger-Eigl, W., Eberhardsteiner, L., & Blab, R. (2015). Mechanical Performance of Pavement Structures with Paving Slabs - Part II: Numerical Simulation Tool Validated by Means of Full-Scale Accelerated Tests. Engineering Structures, 98, 221–229. https://doi.org/10.1016/j.engstruct.2014.10.055 ( reposiTUm)

Füssl, J., Kluger-Eigl, W., & Blab, R. (2015). Mechanical Performance of Pavement Structures with Paving Slabs - Part I: Full-Scale Accelerated Tests as Validation for a Numerical Simulation Tool. Engineering Structures, 98, 212–220. http://hdl.handle.net/20.500.12708/150443 ( reposiTUm)

Eberhardsteiner, L., Füssl, J., Hofko, B., Handle, F., Hospodka, M., Blab, R., & Grothe, H. (2015). Towards a microstructural model of bitumen aging behavior. International Journal of Pavement Engineering, 16(10), 939–949. https://doi.org/10.1080/10298436.2014.993192 ( reposiTUm)

Lukacevic, M., Füssl, J., & Eberhardsteiner, J. (2015). Discussion of Common and New Indicating Properties for the Strength grading of Wooden Boards. Wood Science and Technology, 49(3), 551–576. https://doi.org/10.1007/s00226-015-0712-1 ( reposiTUm)

Hofko, B., Blab, R., Eberhardsteiner, L., Füssl, J., Grothe, H., Handle, F., Hospodka, M., Großegger, D., Nahar, S., Schmets, A., & Scarpas, T. (2015). Microstructure and rheology of bitumen. Rassegna Del Bitume, 79, 25–30. http://hdl.handle.net/20.500.12708/150652 ( reposiTUm)

Kandler, G., Füssl, J., & Eberhardsteiner, J. (2015). Stochastic Finite Element Approaches for Wood-Based Products: Theoretical Framework and Review of Methods. Wood Science and Technology, 49(5), 1055–1097. https://doi.org/10.1007/s00226-015-0737-5 ( reposiTUm)

Kandler, G., Füssl, J., Serrano, E., & Eberhardsteiner, J. (2015). Effective Stiffness Prediction of GLT Beams Based on Stiffness Distributions of Individual Lamellas. Wood Science and Technology, 49(6), 1101–1121. https://doi.org/10.1007/s00226-015-0745-5 ( reposiTUm)

Hofko, B., Handle, F., Eberhardsteiner, L., Hospodka, M., Blab, R., Füssl, J., & Grothe, H. (2015). Alternative Approach Toward the Aging of Asphalt Binder. Transportation Research Record, 2505(1), 24–31. https://doi.org/10.3141/2505-04 ( reposiTUm)

Hofko, B., Hospodka, M., Eberhardsteiner, L., Blab, R., Füssl, J., Grothe, H., Handle, F., & Großegger, D. (2014). Aktuelle Erkenntnisse zum Alterungsverhalten von Bitumen und Asphalt. Straße Und Autobahn, 8, 591–597. http://hdl.handle.net/20.500.12708/156948 ( reposiTUm)

Lukacevic, M., Füssl, J., Griessner, M., & Eberhardsteiner, J. (2014). Performance Assessment of a Numerical Simulation Tool for Wooden Boards with Knots by Means of Full-Field Deformation Measurements. Strain, 50, 301–317. http://hdl.handle.net/20.500.12708/156614 ( reposiTUm)

Füssl, J., Lukacevic, M., Kandler, G., & Eberhardsteiner, J. (2014). A Comprehensive Mechanical Modeling Approach for the Design of Wood-based Products. IACM Expressions, 35, 8–12. http://hdl.handle.net/20.500.12708/154687 ( reposiTUm)

Füssl, J., Lackner, R., & Eberhardsteiner, J. (2014). Creep Response of Bituminous Mixtures - Rheological Model and Microstructural Interpretation. Meccanica, 49(11), 2687–2698. https://doi.org/10.1007/s11012-013-9775-y ( reposiTUm)

Lukacevic, M., & Füssl, J. (2014). Numerical Simulation Tool for Wooden boards with a Physically Based Approach to Identify Structural Failure. European Journal of Wood and Wood Products, 72(4), 497–508. https://doi.org/10.1007/s00107-014-0803-y ( reposiTUm)

Hochreiner, G., Füssl, J., Serrano, E., & Eberhardsteiner, J. (2014). Influence of Wooden Board Strength Class on the Performance of Cross-Laminated Timber Plates Investigated by Means of Full-Field Deformation Measurements. Strain, 50, 161–173. http://hdl.handle.net/20.500.12708/155687 ( reposiTUm)

Hochreiner, G., Füssl, J., & Eberhardsteiner, J. (2014). Cross-Laminated Timber Plates Subjected to Concentrated Loading - Experimental Identification of Failure Mechanisms. Strain, 50, 68–81. http://hdl.handle.net/20.500.12708/155533 ( reposiTUm)

Füssl, J., Bader, T., & Eberhardsteiner, J. (2012). Computational Mechanics for Advanced Timber Engineering. IACM Expressions, 32, 6–11. http://hdl.handle.net/20.500.12708/164192 ( reposiTUm)

Füssl, J. (2012). Mehrskalenmodellierung zur Beschreibung des Ermüdungsverhaltens von Asphalt. GESTRATA Journal, 134, 38–41. http://hdl.handle.net/20.500.12708/164369 ( reposiTUm)

Mang, H. A., Pichler, B., Bader, T., Füssl, J., Jia, X., Fritsch, A., Eberhardsteiner, J., & Hellmich, Ch. (2012). Quantification of Structural and Material Failure Mechanisms across different Length Scales: From Instability to Brittle-Ductile Transitions. Acta Mechanica, 223(9), 1937–1957. https://doi.org/10.1007/s00707-012-0685-1 ( reposiTUm)

Füssl, J., & Lackner, R. (2011). Multiscale Fatique Model for Bituminous Mixtures. International Journal of Fatigue, 33(11), 1435–1450. https://doi.org/10.1016/j.ijfatigue.2011.05.014 ( reposiTUm)

Füssl, J., Lackner, R., Eberhardsteiner, J., & Mang, H. A. (2008). Failure Modes and Effective Strength of Two-Phase Materials Determined by Means of Numerical Limit Analysis. Acta Mechanica, 195(1–4), 185–202. http://hdl.handle.net/20.500.12708/169811 ( reposiTUm)

Gerger, A., & Fadai, A. (2025). Strategies for ductile connections in mid-rise timber buildings in context of a circular economy. In J. Füssl & M. Lukacevic (Eds.), ECCOMAS Thematic Conference on Computational Methods in Wood Mechanics from Material Properties to Timber Structures : Program & Book of Abstracts (pp. 47–47). Vienna University of Technology. ( reposiTUm)

Unsinn, G., Königsberger, M., Zelaya Lainez, L. H., Harter, T., Hirn, U., Füssl, J., & Lukacevic, M. (2025). Micromechanics Modeling of Pulp Fibers and Validation with Single Fiber Tensile Experiments. In J. Füssl & M. Lukacevic (Eds.), ECCOMAS Thematic Conference on Computational Methods in Wood Mechanics from Material Properties to Timber Structures : Program & Book of Abstracts (pp. 70–70). ( reposiTUm)

Lukacevic, M., Füssl, J., Schwaighofer, M., Königsberger, M., & Zelaya Lainez, L. H. (2024). Development of a Lignin-Bonded Biocomposite from Sawmill By-Products. In Engineering Mechanics Institute Conference and Probabilistic Mechanics & Reliability Conference (EMI/PMC 2024). Engineering Mechanics Institute Conference and Probabilistic Mechanics & Reliability Conference (EMI/PMC 2024), Chicago, United States of America (the). ( reposiTUm)

Vida, C., Lukacevic, M., Pech, S., & Füssl, J. (2024). Size Effect of Glued Laminated Timber Beams Based on the Finite Weakest-Link Theory. In Engineering Mechanics Institute Conference and Probabilistic Mechanics & Reliability Conference (EMI/PMC 2024). Engineering Mechanics Institute Conference and Probabilistic Mechanics & Reliability Conference (EMI/PMC 2024), Chicago, United States of America (the). ( reposiTUm)

Pech, S., Lukacevic, M., & Füssl, J. (2024). Phase Field Method-Base Modeling of Wood Fracture. In Engineering Mechanics Institute Conference and Probabilistic Mechanics & Reliability Conference (EMI/PMC 2024). Engineering Mechanics Institute Conference and Probabilistic Mechanics & Reliability Conference (EMI/PMC 2024), Chicago, United States of America (the). ( reposiTUm)

Senk, V., Königsberger, M., Lukacevic, M., & Füssl, J. (2024). Simulating failure in plant fiber composites: Analyzing the interplay of fiber, matrix, and interface mechanics. In C. Hellmich, B. Pichler, & S. Scheiner (Eds.), EMI 2024 IC - ASCE Engineering Mechanics Institute 2024 International Conference : Program & Book of Abstracts (pp. 73–73). ( reposiTUm)

Pech, S., Lukacevic, M., & Füssl, J. (2024). Macroscale Modeling of Wood Fracture Utilizing the Phase Field Approach. In 16th World Congress on Computational Mechanics and 4th Pan American Congress on Computational Mechanics. 16th World Congress on Computational Mechanics and 4th Pan American Congress on Computational Mechanics, Vancouver, Canada. ( reposiTUm)

Pech, S., Lukacevic, M., & Füssl, J. (2024). Phase field method-based modeling of wood fracture. In EMI 2024 IC: ASCE Engineering Mechanics Institute 2024 International Conference: Program & Book of Abstracts. EMI 2024 IC - ASCE Engineering Mechanics Institute 2024 International Conference, Wien, Austria. ( reposiTUm)

Vida, C., Pech, S., Lukacevic, M., & Füssl, J. (2024). Analyzing the failure probability of glued laminated timber beams across varying size using the finite weakest-link theory. In EMI 2024 IC: ASCE Engineering Mechanics Institute 2024 International Conference: Program & Book of Abstracts. EMI 2024 IC - ASCE Engineering Mechanics Institute 2024 International Conference, Wien, Austria. ( reposiTUm)

Brandstätter, F., Autengruber, M., Lukacevic, M., & Füssl, J. (2024). Finite-element-based prediction of moisture uptake and dry-out in CLT caused by water infiltration through end-grain surfaces. In EMI 2024 IC: ASCE Engineering Mechanics Institute 2024 International Conference: Program & Book of Abstracts. EMI 2024 IC - ASCE Engineering Mechanics Institute 2024 International Conference, Wien, Austria. ( reposiTUm)

Zelaya-Lainez, L., Schwaighofer, M., Königsberger, M., Lukacevic, M., Serna-Loaiza, S., Harasek, M., Friedl, A., & Füssl, J. (2024). Characterization of Mechanical Properties of Five Hot-Pressed Lignins Extracted from Different Feedstocks by Micromechanics-Guided Nanoindentation. In Engineering Mechanics Institute Conference and Probabilistic Mechanics & Reliability Conference (EMI/PMC 2024) (pp. 1144–1144). ( reposiTUm)

Zelaya-Lainez, L. H., Schwaighofer, M., Königsberger, M., Lukacevic, M., Serna-Loaiza, S., Zikeli, F. M., Harasek, M., Friedl, A., & Füssl, J. (2024). A nanoindentation study on diverse technical lignins for bio-composite applications. In EMI 2024 IC: ASCE Engineering Mechanics Institute 2024 International Conference: Program & Book of Abstracts. EMI 2024 IC - ASCE Engineering Mechanics Institute 2024 International Conference, Wien, Austria. ( reposiTUm)

Schindler, J., Zelaya Lainez, L. H., Scolari, L., Lukacevic, M., Serna-Loaiza, S., Zikeli, F. M., Harasek, M., & Füssl, J. (2024). Experimental Study on Evaluating the Adhesive Performance of Lignin under Different Pressure and Temperature Conditions. In 40th Danubia-Adria Symposium on Advances in Experimental Mechanics : Book of Abstracts (pp. 160–161). Institute of Fundamental Technological Research of the Polish Academy of Sciences. ( reposiTUm)

Schindler, J., Unsinn, G., Scolari, L., Zelaya-Lainez, L. H., Serna-Loaiza, S., Zikeli, F. M., Harasek, M., Friedl, A., Füssl, J., & Lukacevic, M. (2024). A sustainable approach to lignin as a wood binder. In EMI 2024 IC: ASCE Engineering Mechanics Institute 2024 International Conference: Program & Book of Abstracts. EMI 2024 IC - ASCE Engineering Mechanics Institute 2024 International Conference, Wien, Austria. ( reposiTUm)

Königsberger, M., Scheiner, S., & Füssl, J. (2024). Characterizing viscoelasticity of plant fiber-reinforced biocomposites through micromechanics modeling. In C. Hellmich, B. Pichler, & S. Scheiner (Eds.), EMI 2024 IC - ASCE Engineering Mechanics Institute 2024 International Conference : Program & Book of Abstracts (pp. 73–73). ( reposiTUm)

Zelaya-Lainez, L., Schwaighofer, M., Königsberger, M., Lukacevic, M., Serna Loaiza, S., Zikeli, F. M., Harasek, M., Friedl, A., Lahayne, O., & Füssl, J. (2024). A Load-Controlled Nanoindentation Study on Diverse Technical Lignins for Bio-Composite Applications. In 40th Danubia-Adria Symposium on Advances in Experimental Mechanics : Book of Abstracts (pp. 154–155). ( reposiTUm)

Serna-Loaiza, S., Hofbauer, C., Scolari, L., Ibadov, R., Wahab, N., Unsinn, G., Harter, T., Zelaya-Lainez, L. H., Zikeli, F. M., Füssl, J., Friedl, A., Harasek, M., & Lukacevic, M. (2024). Lignin-Bonded Composites from Sawmill-Byproducts. In Book of abstract WIRE’s MC Meeting & 5th Working Groups Workshop (pp. 78–79). ( reposiTUm)

Schwaighofer, M., Zelaya Lainez, L. H., Königsberger, M., Lukacevic, M., Serna Loaiza, S., Harasek, M., Friedl, A., Lahayne, O., Senk, V., & Füssl, J. (2023). Characterization of Mechanical Properties of Five Hot-Pressed Lignins Extracted from Different Feedstocks by Microscopy-Aided Nanoindentation. In Computational methods in wood mechanics : CompWood 2023, ECCOMAS Thematic Conference, September 5-8, 2023 : book of abstracts (pp. 110–111). CIMNE. ( reposiTUm)

Pech, S., Lukacevic, M., & Füssl, J. (2023). Phase field method-based modeling of fracture in wood. In Computational methods in wood mechanics : CompWood 2023, ECCOMAS Thematic Conference, September 5-8, 2023 : book of abstracts (pp. 104–105). CIMNE. ( reposiTUm)

Pech, S., Lukacevic, M., & Füssl, J. (2023). Phase field method-based modeling of wood fracture. In Book of Abstracts of the ASCE Engineering Mechanics Institute 2023 Cofnerence (pp. 572–572). ( reposiTUm)

Brandstätter, F., Autengruber, M., Lukacevic, M., & Füssl, J. (2023). Numerical Simulation of Moisture-Induced Cracking in Indoor Climate. In Proceedings of the World Conference on Timber Engineering (WCTE 2023) (pp. 398–406). https://doi.org/10.52202/069179-0054 ( reposiTUm)

Pech, S., Lukacevic, M., & Füssl, J. (2023). Simulation of Wood Fracture Mechanics Using the Phase Field Method for Fracture. In Proceedings of the World Conference on Timber Engineering (WCTE 2023) (pp. 391–397). https://doi.org/https://doi.org/10.52202/069179-0053 ( reposiTUm)

Schwaighofer, M., Zelaya Lainez, L. H., Königsberger, M., Lukacevic, M., Serna Loaiza, S., Harasek, M., Friedl, A., Lahayne, O., Senk, V., & Füssl, J. (2023). Characterization of Mechanical Properties of Five Hot-Pressed Lignins Extracted from Different Feedstocks by Microscopy-Aided Nanoindentation. In 39th Danubia-Adria Symposium on Advances in Experimental Mechanics (39th DAS) (pp. 104–105). ( reposiTUm)

Lukacevic, M., Vida, C., & Füssl, J. (2023). Size effect of glued laminated timber beams predicted by numerical simulations. In ASCE Engineering Mechanics Institute 2023 Conference : Book of Abstracts (pp. 675–675). ( reposiTUm)

Hochreiner, G., Detter, M., & Füssl, J. (2023). Improvement of Design Rules in EC5 for Tapered Beams – A Matter of Mechanical Consistency and Competitiveness. In Proceedings of the International Network on Timber Engineering Research (INTER 2023) (pp. 1–17). ( reposiTUm)

Serna Loaiza, S., Hofbauer, C., Zelaya Lainez, L. H., Scolari, L., Zikeli, F. M., Harter, T., Grothe, H., Füssl, J., Friedl, A., Lukacevic, M., & Harasek, M. (2023). Lignin-Bonded Composites from Sawmill Byproducts. In ISWFPC 2023: Conference Proceedings Vol. II, Poster Presentations (pp. 302–305). ( reposiTUm)

Schwaighofer, M., Zelaya Lainez, L. H., Königsberger, M., Lukacevic, M., Serna Loaiza, S., Harasek, M., Lahayne, O., Senk, V., Zikeli, F. M., Friedl, A., & Füssl, J. (2023). Micromechanics-Guided Nanoindentation of Five Hot-Pressed Lignins Extracted From Different Feedstocks. In Oral Presentations 21st ISWFPC International Symposium on Wood, Fiber and Pulp Chemistry (pp. 165–168). ( reposiTUm)

Vida, C., Lukacevic, M., Hochreiner, G., & Füssl, J. (2023). Influence of global failure criterion definition on bending strength and failure mechanisms of glued laminated timber beams. In Computational methods in wood mechanics: CompWood 2023 (pp. 79–80). ( reposiTUm)

Vida, C., Lukacevic, M., Hochreiner, G., Stavric, M., & Füssl, J. (2023). Size Effect of Large Glued Laminated Timber Beams - Contribution to the Ongoing Discussion. In Proceedings of the World Conference on Timber Engineering (WCTE 2023) (pp. 465–473). https://doi.org/10.52202/069179-0063 ( reposiTUm)

Azinovic, B., Serrano, E., Danielsson, H., Füssl, J., Lukacevic, M., Dietsch, P., Arnold, M., Schenk, M., Winter, S., Cabrero, J. M., Gonzalez Serna, P., & Pazlar, T. (2023). Innocrosslam - Adding Knowledge Towards Increased Use of Cross Laminated Timber (CLT). In World Conference on Timber Engineering 2023 (WCTE 2023) (pp. 2432–2441). Curran Associates. https://doi.org/10.52202/069179-0321 ( reposiTUm)

Schwaighofer, M., Zelaya Lainez, L. H., Königsberger, M., Lukacevic, M., Serna Loaiza, S., Lahayne, O., Senk, V., & Füssl, J. (2022). Characterization of Elastic Properties from Technical Lignins by Light Microscopy Aided Nanoindentation. In Book of Abstracts of the 38th Danubia-Adria Symposium on Advances in Experimental Mechanics. 38th Danubia-Adria Symposium on Advances in Experimental Mechanics, Poros, Greece. http://hdl.handle.net/20.500.12708/95688 ( reposiTUm)

Brandstätter, F., Autengruber, M., Lukacevic, M., & Füssl, J. (2022). Numerical Simulation of Moisture-Induced Cracking in Wood exposed to Indoor Climate Conditions. In Proceedings of the 8th European Concress on Computational Methods in Applied Sciences and Engineering (ECCOMAS Congress 2022) (p. 1). International Center for Numerical Methods in Engineering (CIMNE). http://hdl.handle.net/20.500.12708/63109 ( reposiTUm)

Reismüller, R., Lukacevic, M., Kiefer, T., & Füssl, J. (2022). A Finite-Element-Based Unit Cell Approach for Simulating Vertically Perforated Clay Block Masonry. In Proceedings of the 8th European Concress on Computational Methods in Applied Sciences and Engineering (ECCOMAS Congress 2022) (p. 1). International Center for Numerical Methods in Engineering (CIMNE). http://hdl.handle.net/20.500.12708/63108 ( reposiTUm)

Rasoulzadeh, S., Senk, V., Kovacic, I., Reisinger, J., Füssl, J., & Hensel, M. (2022). Linking Early Design Stages with Physical Simulations using Machine Learning. In Proceedings of the 29th EG-ICE International Workshop on Intelligent Computing in Engineering (pp. 216–226). https://doi.org/10.7146/aul.455.c212 ( reposiTUm)

Rasoulzadeh, S., Senk, V., Kovacic, I., Reisinger, J., Füssl, J., & Hensel, M. U. (2022). Linking Early Design Stages with Physical Simulations using Machine Learning Structural Analysis Feedback of Architectural Design Sketches. In Proceedings of the 29th International Workshop on Intelligent Computing in Engineering (EG-ICE). 29th International Workshop on Intelligent Computing in Engineering (EG-ICE), Denmark. ( reposiTUm)

Vida, C., Lukacevic, M., Hochreiner, G., & Füssl, J. (2022). Size Effect of Large Glued Laminated Timber Beams - Contribution to the Ongoing Discussion. In INTER - International Network on Timber Engineering Research Papers 2022. 9th meeting of INTER, Germany. http://hdl.handle.net/20.500.12708/142489 ( reposiTUm)

Zelaya Lainez, L. H., Balduzzi, G., Hellmich, C., & Füssl, J. (2022). Micromechanics of Non-Embedded Spruce Wood: Novel Polishing and Indentation Protocoll. In Book of Abstracts of EMI 2022. Engineering Mechanics Institute Conference 2022 (EMI 2022), Baltimore, United States of America (the). http://hdl.handle.net/20.500.12708/95685 ( reposiTUm)

Zelaya Lainez, L. H., Balduzzi, G., Lahayne, O., Hellmich, C., Lukacevic, M., & Füssl, J. (2022). Micromechanics of Nonembedded Spruce Wood: Novel Polishing and Indentation Protocol. In Book of Abstracts of the 38th Danubia-Adria Symposium on Advances in Experimental Mechanics. 38th Danubia-Adria Symposium on Advances in Experimental Mechanics, Poros, Greece. http://hdl.handle.net/20.500.12708/95689 ( reposiTUm)

Buchner, T., Kiefer, T., Königsberger, M., Jäger, A., & Füssl, J. (2021). Continuum micromechanics model for fired clay bricks: Upscaling of experimentally identified microstructural features to macroscopic elastic stiffness and thermal conductivity. In Programme & Book of Abstracts of the International Symposium on Interdisciplinary Research in Civil Engineering Sciences (IS-IRCES) (p. 19). Technische Universität Wien. http://hdl.handle.net/20.500.12708/62983 ( reposiTUm)

Buchner, T., Kiefer, T., Zelaya-Lainez, L., Gaggl, W., & Füssl, J. (2021). A Multitechnique Characterization and Quantification of the Microstructures of Bricks Made of Different Clayey Raw Materials. In Book of Abstracts of the 37th Danubia Adria Symposium on Advances in Experimental Mechanics (pp. 45–46). Johannes Kepler University. http://hdl.handle.net/20.500.12708/62993 ( reposiTUm)

Lukacevic, M., Füssl, J., Pech, S., Vida, C., & Eberhardsteiner, J. (2021). Computational Mechanics Concepts for Wood-Based Products and Timber Structural Elements. In Proceedings of WCTE 2021 - World Conference on Timber Engineering. World Conference on Timber Engineering (WCTE2021), Santiago, Chile, Chile. http://hdl.handle.net/20.500.12708/63062 ( reposiTUm)

Autengruber, M., Lukacevic, M., Vida, C., Pech, S., & Füssl, J. (2021). Computergestützte Modellierung im Holzbau - Herausforderungen und Möglichkeiten. In TU-Dresden (Ed.), 25. Dresdner Baustatik-Seminar: Realität - Modellierung - Tragwerksplanung (pp. 131–160). http://hdl.handle.net/20.500.12708/63066 ( reposiTUm)

Balduzzi, G., Morganti, S., Füssl, J., Reali, A., & Auricchio, F. (2021). Anisotropic Beams with Variable Fiber Directions: Analystical Modeling and Isogeometric Collocation. In Book of Abstracts of the 14th World Congress in Computational Mechanics and ECCOMAS Congress (virtual) (p. 1). International Center for Numerical Methods in Engineering (CIMNE). http://hdl.handle.net/20.500.12708/62938 ( reposiTUm)

Lukacevic, M., Füssl, J., Pech, S., Vida, C., & Eberhardsteiner, J. (2021). Computational mechanics concepts for wood-based products and timber structural elements. In Proceedings of WCTE 2021 - World Conference on Timber Engineering (pp. 1–7). https://doi.org/10.34726/1341 ( reposiTUm)

Autengruber, M., Lukacevic, M., & Füssl, J. (2021). Heat and mass transfer model for wood including free water transport. In Proceedings of WCTE 2021 - World Conference on Timber Engineering (pp. 1–7). https://doi.org/10.34726/1342 ( reposiTUm)

Buchner, T., Kiefer, T., Zelaya-Lainez, L., Gaggl, W., & Füssl, J. (2020). A Multitechnique, Quantitative Characterization of the Microstructure of Fired Clay Bricks. In Abstracts of the 17th International Brick and Block Masonry Online-Conference: From Historical to Sustainable Masonry (p. 1). Silesian University of Technology, Cracow University of Technology, Wroclaw University of Technology. http://hdl.handle.net/20.500.12708/62886 ( reposiTUm)

Hochreiner, G., Kunecky, J., & Füssl, J. (2020). Konstruktionsvielfalt bei Ausklinkungen Baustatische Modellbildung und Nachweisführung im Ingenieurholzbau. In Baustatik - Baupraxis 14. Universität Stuttgart. http://hdl.handle.net/20.500.12708/62933 ( reposiTUm)

Pech, S., Kandler, G., Lukacevic, M., & Füssl, J. (2019). Metamodel Assisted Optimization of Glued Laminated Timber Beams by Using Metaheuristic Algorithms. In J. Eberhardsteiner & J. Schöberl (Eds.), Book of Abstracts of the 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2019) (p. 438). TU Verlag. http://hdl.handle.net/20.500.12708/62648 ( reposiTUm)

Stembera, V., & Füssl, J. (2019). A Performance Comparison of Different Shell Elements for Upper Bound Limit Analysis. In J. Eberhardsteiner & J. Schöberl (Eds.), Book of Abstracts of the 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2019) (p. 548). TU Verlag. http://hdl.handle.net/20.500.12708/62649 ( reposiTUm)

Balduzzi, G., Morganti, S., Füssl, J., Aminbaghai, M., Reali, A., & Auricchio, F. (2019). Evidences of the Non-Negligible Effects of the Orientation of Material Principal Directions on the Structural Response of a Planar Anisotropic Beam. In Book of Abstracts of the 90th Annual Meeting of the International Association of Applied Mathematics and Mechanics (GAMM 2019) (pp. 183–184). TU Verlag. http://hdl.handle.net/20.500.12708/62650 ( reposiTUm)

Balduzzi, G., Morganti, S., Füssl, J., Aminbaghai, M., Reali, A., & Auricchio, F. (2019). A Multilayer Anisotropic Beam Model Based on Timoshenko Kinematics, Enhanced Stress Recovery, and Effective Constitutive Relations. In Book of Abstracts of the 5th ECCOMAS Young Investigators Concerence (YIC 2019) (pp. 189–190). AKNET-Press. http://hdl.handle.net/20.500.12708/62729 ( reposiTUm)

Autengruber, M., Lukacevic, M., & Füssl, J. (2019). Heat and Mass Transfer Model for Wood Under Real Climate Conditions. In Book of Abstracts of the International Conference on Computational Methods in Wood Mechanics - from Material Properties to Timber Structures (CompWood 2019). Linnaeus University. http://hdl.handle.net/20.500.12708/62814 ( reposiTUm)

Suda, R., Kiefer, T., Schranz, C., & Füssl, J. (2019). Do Fibre Reinforced Bed Joints Affect the Compressive Strength of Brick Masonry? A Stochastic, Finite Element Based Approach to Quantify the Increase of the Load Carrying Capacity. In J. Zhang & B. Pichler (Eds.), Programme & Proceedings of the China-Austria Forum for Postgraduates of Civil Engineering (pp. 91–93). Vienna University of Technology. http://hdl.handle.net/20.500.12708/62774 ( reposiTUm)

Pech, S., Lukacevic, M., & Füssl, J. (2019). Phase Field Method-Based Modeling of Fracture in Wood. In J. Zhang & B. Pichler (Eds.), Programme & Proceedings of the China-Austria Forum for Postgraduates of Civil Engineering (pp. 98–101). Vienna University of Technology. http://hdl.handle.net/20.500.12708/62775 ( reposiTUm)

Balduzzi, G., Morganti, S., Füssl, J., Aminbaghai, M., Reali, A., & Auricchio, F. (2019). Timoshenko Beam with Enhanced Stress Recovery and Constitutive Relations Describing the Effects of Variable Grain Direction on the Behavior of a GLT Beam. In Book of Abstracts of the International Conference on Computational Methods in Wood Mechanics - From Material Properties to Timber Structures (p. 75). Linnaeus University. http://hdl.handle.net/20.500.12708/62727 ( reposiTUm)

Pech, S., Lukacevic, M., & Füssl, J. (2019). Phase Field Method-Based Modeling of Fracture in Wood. In Book of Abstracts of the International Conference on Computational Methods in Wood Mechanics - from Material Properties to Timber Structures (CompWood 2019) (p. 17). Linnaeus University. http://hdl.handle.net/20.500.12708/62801 ( reposiTUm)

Balduzzi, G., Morganti, S., Füssl, J., Reali, A., & Auricchio, F. (2018). Beams with Variable Mechanical Properties: Planar Timoshenko-like Model and Numerical Solution Via Iso-Geometric Collocation. In Book of Abstracts of the 13th World Congress in Computational Mechanics (WCCM 2018) (p. 1). International Association for Computational Mechanics (IACM). http://hdl.handle.net/20.500.12708/62498 ( reposiTUm)

Balduzzi, G., Sacco, E., Auricchio, F., & Füssl, J. (2018). Tapered Mono-Symmetri Thin Walled Beams: Critial Issues in the Evaluation of Cross-Section Resistance. In Proceedings of the 10th European Solid Mechanics Conference (ESMC 2018) (p. 1). European Mechanics Society (EUROMECH). http://hdl.handle.net/20.500.12708/62499 ( reposiTUm)

Pech, S., Kandler, G., & Füssl, J. (2018). Metamodel Assisted Optimization of GLT Systems by Reordering Laminations Using Metaheuristic Algorithms. In Proceedings of the 6th European Conference on Computational Mechanics (ECCM6-ECFD7). International Center for Numerical Methods in Engineering (CIMNE). http://hdl.handle.net/20.500.12708/62534 ( reposiTUm)

Balduzzi, G., Kandler, G., & Füssl, J. (2018). Estimation of GLT beam stiffness based on homogenized board mechanical properties and composite beam theory. In Proceedings of the 6th. European Conference  on Computational Mechanics (Solids, Structures and Coupled Problems) : ECCM 6 : 7th. European Conference  on Computational Fluid Dynamics : ECFD 7 : Glasgow, Scotland, UK : June 11 – 15, 2018. 6th. European Conference  on Computational Mechanics (Solids, Structures and Coupled Problems)  ECCM 6 7th. European Conference  on Computational Fluid Dynamics ECFD 7, Glasgow, United Kingdom of Great Britain and Northern Ireland (the). https://resolver.obvsg.at/urn:nbn:at:at-ubtuw:3-3598 ( reposiTUm)

Lukacevic, M., Füssl, J., & Eberhardsteiner, J. (2018). Simulating failure mechanisms in wooden boards with knots by means of a microstructure-based multisurface failure criterion. In Proceedings of WCTE 2018 - World Conference on Timber Engineering (CD Rom). World Conference on Timber Engineering (WCTE 2018), Seoul, Korea (the Republic of). https://resolver.obvsg.at/urn:nbn:at:at-ubtuw:3-3747 ( reposiTUm)

Balduzzi, G., Aminbaghai, M., & Füssl, J. (2017). Linear response of a planar FGM beam with non-linear variation of the mechanical properties. In A. Güemes, A. Benjeddou, J. Rodellar, & J. Leng (Eds.), 8th ECCOMAS Thematic Conference on Smart  Structures and Materials : 6th International Conference on Smart Materials  and Nanotechnology in Engineering : SMART 2017 : 5 – 8 June 2017, Madrid, Spain. http://hdl.handle.net/20.500.12708/358 ( reposiTUm)

Balduzzi, G., Sacco, E., Auricchio, F., & Füssl, J. (2017). Non-Prismatic Multi-Layered Planar Beams: Critical Issues and Effective Modelling Approaches. In Proceedings of the 3rd International Conference on Mechanics of Composites (p. 1). Universita Di Bologna. http://hdl.handle.net/20.500.12708/62289 ( reposiTUm)

Autengruber, M., Lukacevic, M., Eberhardsteiner, J., & Füssl, J. (2017). A Numerical Simulation Tool for Coupled Heat and Mass Transfer in Wood. In Book of Abstracts of the XXI. St. Inter-Institute Seminar for Young Researchers (p. 6). Department of Structural Mechanics, Budapest University of Technology and Economics. http://hdl.handle.net/20.500.12708/62302 ( reposiTUm)

Kiefer, T., Kariem, H., & Füssl, J. (2017). A Multi-Scale Material Model for the Determination of the Orthotropic Conductivity Tensor of Brick Ceramic Bodies. In Book of Abstracts of the XXIst. Inter-Institute Seminar for Young Researchers (p. 12). Department of Structural Mechanics, Budapest University of Technology and Economics. http://hdl.handle.net/20.500.12708/62303 ( reposiTUm)

Balduzzi, G., Morganti, S., Sacco, E., Auricchio, F., Füssl, J., & Reali, A. (2017). Multilayer Beam Model: Numerical Solution Via Isogeometric Collocation Method. In Abstracts and Programme of the 6th ECCOMAS Thematic Conference on the Mechanical Response of Composites (COMPOSITES 2017) (p. 1). Eindhoven University of Technology. http://hdl.handle.net/20.500.12708/62268 ( reposiTUm)

Balduzzi, G., Füssl, J., Auricchio, F., & Sacco, E. (2017). Remarks on the Shear Stress Distribution within the Beam Cross-Section in Non-Linear Regime. In Proceedings of the 6th International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering (COMPDYN 2017). National Technical University of Athens. http://hdl.handle.net/20.500.12708/62269 ( reposiTUm)

Hochreiner, G., Füssl, J., & Eberhardsteiner, J. (2017). Punktgestützte Brettsperrholzplatten - Erfahrungen mit numerischen Methoden bezogen auf die Bemessung im Alltag. In Berichte der Fachtagung Baustatik - Baupraxis 13 (pp. 341–348). Ruhr-Universität Bochum. http://hdl.handle.net/20.500.12708/62161 ( reposiTUm)

Godinho, P. M., Jajcinovic, M., Bader, T., Fischer, W., Hirn, U., Bauer, W., & Hellmich, C. (2017). A Continuum Micromechanics Approach to the Strength of Planar Fiber Networks: Paper Material Applications. In J. Füssl, T. Bader, & J. Eberhardsteiner (Eds.), Book of Abstracts of the ECCOMAS Thematic Conference on Computational Methods in Wood Mechanics - from Material Properties to Timber Structures (CompWood 2017) (p. 89). Vienna University of Technology. http://hdl.handle.net/20.500.12708/62188 ( reposiTUm)

Autengruber, M., Lukacevic, M., Eberhardsteiner, J., & Füssl, J. (2017). A Numerical Simulation Tool for Coupled Heat and Mass Transfer in Wood. In Programme & Book of Abstracts on Computational Methods in Wood Mechanics - from Material Properties to Timber Structures (CompWood 2017) (p. 62). TU Verlag. http://hdl.handle.net/20.500.12708/62206 ( reposiTUm)

Li, M., Füssl, J., Lukacevic, M., & Eberhardsteiner, J. (2017). Numerical Limit Analysis Approaches for Strength Predictions of Cross-Laminated Timber Plates. In Programme & Book of Abstracts on Computational Methods in Wood Mechanics - from Material Properties to Timber Structures (CompWood 2017) (p. 90). TU Verlag. http://hdl.handle.net/20.500.12708/62207 ( reposiTUm)

Kandler, G., Lukacevic, M., & Füssl, J. (2017). Experimental and Numerical Investigations on the Mechanical Behavior of Glued Laminated Timber. In Programme & Book of Abstracts on Computational Methods in Wood Mechanics - from Material Properties to Timber Structures (CompWood 2017) (p. 36). TU Verlag. http://hdl.handle.net/20.500.12708/62205 ( reposiTUm)

Lukacevic, M., Füssl, J., & Eberhardsteiner, J. (2017). A Microstructure-Based Multisurface Failure Criterion for the Description of Brittle and Ductile Failure Mechanisms of Clear-Wood. In Programme & Book of Abstracts on Computational Methods in Wood Mechanics - from Material Properties to Timber Structures (CompWood 2017) (p. 28). TU Verlag. http://hdl.handle.net/20.500.12708/62204 ( reposiTUm)

Balduzzi, G., Kandler, G., & Füssl, J. (2017). Estimation of the Bending Stiffness of GLT Beams: A Novel Procedure Based on Enhanced Analysis of the Boards’ Stiffness and First Order Beam Models. In Programme & Book of Abstracts on Computational Methods in Wood Mechanics - from Material Properties to Timber Structures (CompWood 2017) (p. 93). TU Verlag. http://hdl.handle.net/20.500.12708/62208 ( reposiTUm)

Balduzzi, G., Hochreiner, G., Sacco, E., Auricchio, F., & Füssl, J. (2017). Remarks on the Effectiveness of Stress-Distribution Recovery Formulas for Mono-Symmetric Thin Walled Beams. In Proceedings of the XXVI Giornate Italiane della Costruzione in Acciaio. Collegio Dei Tecnici dell’Acciaio. http://hdl.handle.net/20.500.12708/62239 ( reposiTUm)

Balduzzi, G., Sacco, E., Auricchio, F., & Füssl, J. (2017). Non-prismatic thin-walled beams: critical issues and effective modeling. In L. Ascione, V. Berardi, L. Feo, F. Fraternali, & A. M. Tralli (Eds.), AIMETA 2017  : Proceedings of the XXIII Conference of the Italian Association  of Theoretical and Applied Mechanics. https://resolver.obvsg.at/urn:nbn:at:at-ubtuw:3-3184 ( reposiTUm)

Kariem, H., Hellmich, C., & Füssl, J. (2016). Dual-Scale Porosity Analysis of Fired-Clay Bricks with Different Pore-Forming Agents and Concentrations. In Book of Abstracts of the 33rd Danubia Adria Symposium on Advances in Experimental Mechanics (pp. 34–35). Slovenian Society of Experimental Mechanics. http://hdl.handle.net/20.500.12708/62008 ( reposiTUm)

Lukacevic, M., Füssl, J., & Eberhardsteiner, J. (2016). A Numerical Approach to Describe Failure of Wood - From the Wood Cell Level Up to Wood-Based Products. In J. Eberhardsteiner, W. Winter, A. Fadai, & M. Pöll (Eds.), CD-ROM Proceedings of the World Conference on Timber Engineering (WCTE 2016) (p. 9). Grafisches Zentrum HTU GmbH. http://hdl.handle.net/20.500.12708/61960 ( reposiTUm)

Balduzzi, G., Hochreiner, G., Füssl, J., & Auricchio, F. (2016). Performance Evaluation of New Straightforward Formulas for the Serviceability Analysis of Cambered Timber Beams. In J. Eberhardsteiner, W. Winter, A. Fadai, & M. Pöll (Eds.), CD-ROM Proceedings of the World Conference on Timber Engineering (WCTE 2016) (p. 8). Grafisches Zentrum HTU GmbH. http://hdl.handle.net/20.500.12708/61957 ( reposiTUm)

Kandler, G., Lukacevic, M., & Füssl, J. (2016). From the Knot Morphology of Individual Timber Baords to the Mechanical Properties of Glued Laminated Timber. In J. Eberhardsteiner, W. Winter, A. Fadai, & M. Pöll (Eds.), CD-ROM Proceedings of the World Conference on Timber Engineering (WCTE 2016) (p. 10). Grafisches Zentrum HTU GmbH. http://hdl.handle.net/20.500.12708/61963 ( reposiTUm)

Füssl, J., Li, M., Lukacevic, M., Eberhardsteiner, J., & Martin, C. (2016). Three Different Methods for Predicting the Strength Behavior of Clear Wood - A Performance Comparison and Basis for a Combined Approach. In J. Eberhardsteiner, W. Winter, A. Fadai, & M. Pöll (Eds.), CD-ROM Proceedings of the World Conference on Timber Engineering (WCTE 2016) (p. 10). Grafisches Zentrum HTU GmbH. http://hdl.handle.net/20.500.12708/61961 ( reposiTUm)

Li, M., Füssl, J., Lukacevic, M., Eberhardsteiner, J., & Martin, C. (2016). A Number Limit Analysis Approach for Predicting Strength of Clear Wood. In J. Eberhardsteiner, W. Winter, A. Fadai, & M. Pöll (Eds.), CD-ROM Proceedings of the World Conference on Timber Engineering (WCTE 2016) (p. 10). Grafisches Zentrum HTU GmbH. http://hdl.handle.net/20.500.12708/61962 ( reposiTUm)

Lukacevic, M., Füssl, J., & Eberhardsteiner, J. (2016). A numerical approach to describe failure of wood - From the wood cell level up to wood-based products. In J. Eberhardsteiner, W. Winter, A. Fadai, & M. Pöll (Eds.), WCTE 2016 e-book : containing all full papers submitted to the World Conference on Timber Engineering (WCTE 2016), August 22-25, 2016, Vienna, Austria. TU Verlag Wien. https://resolver.obvsg.at/urn:nbn:at:at-ubtuw:3-2950 ( reposiTUm)

Steiner, D., Hofko, B., Hospodka, M., Handle, F., Eberhardsteiner, L., Füssl, J., Grothe, H., & Blab, R. (2016). Using Highly Oxidant Gas for Simulating Long-Term Ageing of Asphalt Mix Specimens in the Lab. In F. Canestrari & M. Partl (Eds.), 8th RILEM International Symposium on Testing and Characterization of Sustainable and Innovative Bituminous Materials (pp. 189–202). Springer Netherlands. https://doi.org/10.1007/978-94-017-7342-3_16 ( reposiTUm)

Hochreiner, G., Füssl, J., & Eberhardsteiner, J. (2015). Glulam - Experimental Characterisation of Local Stiffness and Failure Modes by DIC. In Proceedings of the 32nd Danubia-Adria-Symposium (DAS 32) (pp. 1–2). University Zilina. http://hdl.handle.net/20.500.12708/61769 ( reposiTUm)

Kariem, H., Füssl, J., & Hellmich, C. (2015). Dual-Scale Porosity Analysis of Bricks with Different Pore-Forming Agents and Concentrations. In Book of Abstracts of the 20th Inter-Institute Seminar for Young Researchers (p. 26). Cracow University of Technology. http://hdl.handle.net/20.500.12708/61722 ( reposiTUm)

Füssl, J., Lukacevic, M., Kandler, G., & Eberhardsteiner, J. (2015). A Comprehensive Mechanical Modeling Approach for the Optimization of Wood-Based Products. In Proceedings of the EUROMECH Colloquium 556 on Theoretical, Numerical, and Experimental Analyses in Wood Mechanics (pp. 40–41). TU Dresden. http://hdl.handle.net/20.500.12708/61565 ( reposiTUm)

Lukacevic, M., Füssl, J., & Eberhardsteiner, J. (2015). A Numerical Approach to Describe Failure of Wood - From the Wood Cell Level up to Wood-Based Products. In Proceedings of the 2015 Conference of the ASCE Engineering Mechanics Institute (EMI 2015). American Society of Civil Engineers (ASCE). http://hdl.handle.net/20.500.12708/61618 ( reposiTUm)

Eberhardsteiner, L., Füssl, J., Hofko, B., Handle, F., Hospodka, M., Blab, R., & Grothe, H. (2015). Micromechanical description of bitumen aging behavior. In 8th RILEM International Symposium on Testing and Characterization of Sustainable and Innovative Bituminous Materials (pp. 411–421). Springer Netherlands. http://hdl.handle.net/20.500.12708/61679 ( reposiTUm)

Hengl, H., Füssl, J., & Kluger-Eigl, W. (2015). The influence of arch supporting effect on the load bearing capacity of paving block superstructures. In ICCBP 11th International Conference on Concrete Block Pavement (p. 10). FGSV. http://hdl.handle.net/20.500.12708/61780 ( reposiTUm)

Hofko, B., Handle, F., Eberhardsteiner, L., Hospodka, M., Blab, R., Füssl, J., & Grothe, H. (2015). Alternative Approach Toward Aging of Bitumen and Asphalt Mixes. In Proceedings of the Transport Research Board 94th Annual Meeting. Transport Research Board 94th Annual Meeting, Washington, United States of America (the). http://hdl.handle.net/20.500.12708/61547 ( reposiTUm)

Eberhardsteiner, L., Füssl, J., Hofko, B., & Blab, R. (2015). Prediction of hot mix asphalt stiffness - a multiscale approach. In Proceedings of the Transport Research Board 94th Annual Meeting (p. 16). http://hdl.handle.net/20.500.12708/61606 ( reposiTUm)

Hofko, B., Hospodka, M., Blab, R., Eberhardsteiner, L., Füssl, J., Grothe, H., & Handle, F. (2014). Impact of Field Ageing on Low-Temperature Performance of Binder and Hot Mix Asphalt. In Proceedings of the 12th ISAP Conference on Asphalt Pavements (p. 18). International Society of Asphalt Pavements. http://hdl.handle.net/20.500.12708/61379 ( reposiTUm)

Kandler, G., Füssl, J., & Eberhardsteiner, J. (2014). Influence of Stiffness Variation in Timber Boards on Effective Behavior of GLT. In Berichte des Doktorandenkolloquium Holzbau Forschung + Praxis (pp. 111–118). Universität Stuttgart. http://hdl.handle.net/20.500.12708/61453 ( reposiTUm)

Kandler, G., Wagner, L., Füssl, J., Serrano, E., & Eberhardsteiner, J. (2014). Influence of Stiffness Variation in Timber Boards on Effective Behavior of GLT. In Proceedings of the 11th World Congress on Computational Mechanics (WCCM XI) (p. 2). CIMNE. http://hdl.handle.net/20.500.12708/61455 ( reposiTUm)

Kandler, G., Füssl, J., & Eberhardsteiner, J. (2014). A Probabilistic Model to Account for Stiffness Variation in Glued Laminated Timber. In Proceedings of the 11th World Congress on Computational Mechanics (WCCM XI) (p. 2). CIMNE. http://hdl.handle.net/20.500.12708/61454 ( reposiTUm)

Handle, F., Füssl, J., Neudl, S., Großegger, D., Eberhardsteiner, L., Hofko, B., Hospodka, M., Blab, R., & Grothe, H. (2014). Understanding the Microstructure of Bitumen: A CLSM and Fluorescence Approach to model Bitumen Ageing Behavior. In Proceedings of the 12th ISAP Conference on Asphalt Pavements (p. 12). ISAP. http://hdl.handle.net/20.500.12708/48776 ( reposiTUm)

Handle, F., Füssl, J., Neudl, S., Großegger, D., Eberhardsteiner, L., Hofko, B., Hospodka, M., Blab, R., & Grothe, H. (2014). Understanding the Microstructure of Bitumen: A CLSM and Fluorescence Approach to model Bitumen Ageing Behavior. In R. Kim (Ed.), Asphalt Pavements (pp. 521–530). Taylor and Francis Group London. http://hdl.handle.net/20.500.12708/48816 ( reposiTUm)

Hofko, B., Hospodka, M., Blab, R., Eberhardsteiner, L., Füssl, J., Grothe, H., & Handle, F. (2014). Impact of Field Ageing on Low-Temperature Performance of Binder and Hot Mix Asphalt. In R. Kim (Ed.), Aspahlt Pavements (pp. 381–395). Taylor & Francis Group London. http://hdl.handle.net/20.500.12708/48817 ( reposiTUm)

Kandler, G., Füssl, J., & Eberhardsteiner, J. (2013). A Numerical Approach for Wood Products - From Clear Wood Properties and “Structural” Inhomogeneities to Stochastic Aspects of Timber. In Proceedings of the XII. International Conference on Computational Plasticity (COMPLAS XII) (p. 1). International Center for Numerical Methods in Engineering (CIMNE). http://hdl.handle.net/20.500.12708/59647 ( reposiTUm)

Lukacevic, M., Füssl, J., & Eberhardsteiner, J. (2013). Influence of Knot Groups on Effective Mechanical Properties of Solid - Wood Based Products Determined by Means of 3D Finite - Element Simulations. In Proceedings of the XII. International Conference on Computational Plasticity (COMPLAS XII) (p. 1). International Center for Numerical Methods in Engineering (CIMNE). http://hdl.handle.net/20.500.12708/59729 ( reposiTUm)

Kandler, G., Füssl, J., & Eberhardsteiner, J. (2013). A Numerical Approach for the Mechanical and Probabilistic Assessment of Timber Products. In Book of Abstracts of the 19th Inter-Institute Seminar for Young Researchers (p. 19). Technische Universität Wien, Institut für Mechanik der Werkstoffe und Strukturen. http://hdl.handle.net/20.500.12708/61136 ( reposiTUm)

Hofko, B., Blab, R., Hospodka, M., Füssl, J., Eberhardsteiner, L., Grothe, H., & Handle, F. (2013). Aktuelles zum Alterungsverhalten von Bitumen und Asphalt. In Begleitband zu den 3. Dresdner Asphalttagen (p. 9). TU Dresden. http://hdl.handle.net/20.500.12708/61202 ( reposiTUm)

Hochreiner, G., Füssl, J., & Eberhardsteiner, J. (2013). Identification of the Failure Modes of CLT-Plates by Means of DIC Measurements. In Proceedings of the 30th Danubia-Adria-Symposium (DAS 30) (pp. 185–186). Croatian Society of Mechanics. http://hdl.handle.net/20.500.12708/61115 ( reposiTUm)

Handle, F., Hofko, B., Füssl, J., Eberhardsteiner, L., Neudl, S., Hospodka, M., Großegger, D., Blab, R., & Grothe, H. (2013). Bitumen Microstructure And Bitumen Ageing. In 15. Österreichische Chemietage - Programm. 15th Austrian Chemistry Days (Chemietage), Graz, Austria. http://hdl.handle.net/20.500.12708/48336 ( reposiTUm)

Blab, R., Kluger-Eigl, W., & Füssl, J. (2013). Optimized Structures for Heavy Duty Block Pavements. In Proceedings - Ninth International Conference on the Bearing Capacity of Roads, Railways and Airfields (pp. 501–512). akademika publishing. http://hdl.handle.net/20.500.12708/61083 ( reposiTUm)

Füssl, J., Kluger-Eigl, W., & Blab, R. (2012). Numerical Simulation Tool for Slab and Block Pavements Validated by Means of Large-Scale Accelerated Pavement Tests. In CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) (p. 2). Vienna University of Technology. http://hdl.handle.net/20.500.12708/60945 ( reposiTUm)

Lukacevic, M., & Füssl, J. (2012). A Criterion for the Effective Bending Strength of Wooden Boards with Knots Derived by a 3 D Finite-Element Tool. In Forschungskolloquium Holzbau “Forschung und Praxis.” Universität Stuttgart. http://hdl.handle.net/20.500.12708/60947 ( reposiTUm)

Lukacevic, M., de Borst, K., Füssl, J., & Eberhardsteiner, J. (2012). Influence of Different Knot Groups on Effective Mechanical Properties of Solid-Wood Based Products Determined by Means of 3D Finite-Element Simulations. In Book of Abstracts - 8th European Solid Mechanics Conference (ESMC 2012) (p. 2). TU Graz. http://hdl.handle.net/20.500.12708/60813 ( reposiTUm)

Blab, R., Kluger-Eigl, W., Füssl, J., Arraigada, M., & Hofko, B. (2012). Accelerated Pavement Testing on Slab and Block Pavements using the New Mobile Load Simulator MLS10. In Advances in Pavement Design through Full-scale Accelerated Pavement Testing (pp. 323–329). CRC Press. http://hdl.handle.net/20.500.12708/60878 ( reposiTUm)

Füssl, J., & Lackner, R. (2011). Micromechanical Model for the Description of Fatique Behavior of Asphalt Mixtures. In Book of Abstracts of the 18th Inter-Institute Seminar (p. 22). Department of Structural Mechanics, Budapest University of Technology and Economics. http://hdl.handle.net/20.500.12708/60588 ( reposiTUm)

Füssl, J., & Lackner, R. (2010). Micromechanical Model for the Description of Fatique Behavior of Asphalt Mixtures. In Proceedings of the IV European Conference on Computational Mechanics (ECCM 2010). ECCOMAS. http://hdl.handle.net/20.500.12708/60196 ( reposiTUm)

Füssl, J., Lackner, R., & Mang, H. A. (2009). “Homogenization of Strength” - Determination of Effective Failure Criteria and Failure Modes of Composites Using Numerical Limit Analysis. In Proceedings of the 12th International Conference on Fracture (p. 9). Natural Resources Canada. http://hdl.handle.net/20.500.12708/59960 ( reposiTUm)

Füssl, J., & Lackner, R. (2008). Limit-Analysis Based Identification of Fracture and Degradation Mechanisms in Two-Phase Composite Materials. In Proceedings (Extended Abstracts) of the 6th International Conference on Computation of Shell & Spatial Structures (IASS-IACM 2008) (p. 4). USACM. http://hdl.handle.net/20.500.12708/59660 ( reposiTUm)

Füssl, J., & Lackner, R. (2008). Limit Analysis Based Upscaling of Strength Properties and Investigation of Failure Modes of Two-Phase Materials. In CD-ROM Proceedings of the 8th World Congress on Computational Mechanics (WCCM 8) and the 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008) (p. 2). CIMNE. http://hdl.handle.net/20.500.12708/59687 ( reposiTUm)

Lackner, R., Pichler, C., Jäger, A., Aigner, E., & Füssl, J. (2008). Multiscale Models for Building Materials - From Nanoindentation towards Structural Safety Assessment. In H. A. Mang, J. Eberhardsteiner, & C. Hellmich (Eds.), Programme & Book of Abstracts of the ECCOMAS Multidisciplinary Jubilee Symposium (EMJS) 2008 (pp. 65–66). Vienna University of Technology. http://hdl.handle.net/20.500.12708/59619 ( reposiTUm)

Füssl, J., Lackner, R., & Eberhardsteiner, J. (2008). Effect of Deterioration Processes on Effective Strength of Concrete Highlighted by Means of Numerical Limit Analysis. In Proceedings of the Eleventh East Asia-Pacific Conference on Structural Engineering and Construction (EASEC-11) (pp. 272–273). D & E Drawing and Editing Services Company. http://hdl.handle.net/20.500.12708/59755 ( reposiTUm)

Füssl, J., Lackner, R., & Eberhardsteiner, J. (2008). Strength Properties of Composites Highlighted by Means of Numerical Limit Analysis. In Taiwan-Austria Joint Workshop on Computational Mechanics of Materials and Structures (pp. 31–32). National Taiwan University of Science and Technology. http://hdl.handle.net/20.500.12708/59747 ( reposiTUm)

Eberhardsteiner, J., Füssl, J., & Lackner, R. (2007). Multiscale Prediction of Strength Properties of Asphalt by means of Limit Analysis. In 9th US National Congress on Computational Mechanics (USNCCM 9) (p. 1). USACM. http://hdl.handle.net/20.500.12708/59422 ( reposiTUm)

Füssl, J., & Lackner, R. (2007). Limit-Analysis Based Upscaling of Strength Properties of Matrix-Inclusion Materials. In Book of Abstracts, 16th Inter-Institute Seminar for Young Researchers (p. 27). TU Wien. http://hdl.handle.net/20.500.12708/59370 ( reposiTUm)

Füssl, J., & Lackner, R. (2007). Microstructure-Based Failure Surfaces of Matrix-Inclusion Materials: The Origin of J3 Plasticity Highlighted by Limit Analysis. In P. Gambarova, G. Ferro, & G. A. Plizzari (Eds.), Proceedings of the 6th International Conference on Fracture Mechanics of Concrete and Concrete Structures (FramCos-6) (pp. 403–410). Taylor & Francis Group. http://hdl.handle.net/20.500.12708/59473 ( reposiTUm)

Füssl, J., Aigner, E., Lackner, R., & Mang, H. A. (2007). Upscaling of Viscoelastic and Strength Properties of Matrix-Inclusion Materials in the Framework of Multiscale Modeling. In Proceedings of APCOM’07-EPMESC XI (p. 14). APACM/EPMESC. http://hdl.handle.net/20.500.12708/59559 ( reposiTUm)

Füssl, J., & Lackner, R. (2007). Limit-Analysis Based Upscaling of Strength Properties of Matrix-Inclusion Materials. In A. Loizos, T. Scarpas, & I. L. Al-Quadi (Eds.), Proceedings of the International Conference on Advanced Characterisation of Pavement and Soil Engineering Materials (pp. 1133–1144). Taylor & Francis/Balkema. http://hdl.handle.net/20.500.12708/59847 ( reposiTUm)

Füssl, J., Lukacevic, M., Pillwein, S., & Pottmann, H. (2019). Computational Mechanical Modelling of Wood - From Microstructural Characteristics Over Wood-Based Products to Advanced Timber Structures. In Digital Wood Design, Lecture Notes in Civil Engineering (pp. 639–673). Springer. http://hdl.handle.net/20.500.12708/30015 ( reposiTUm)

Hochreiner, G., Füssl, J., Eberhardsteiner, J., & Aicher, S. (2014). CLT Plates under Concentrated Loading - Experimental Identification of Crack Modes and Corresponding Failure Mechanismus. In Materials and Joints in Timber Structures - Recent Developments of Technology (pp. 703–712). Springer Verlag. http://hdl.handle.net/20.500.12708/28021 ( reposiTUm)

Füssl, J., & Lackner, R. (2009). “Homogenization of Strength” - A Numerical Limit Analysis Approach. In Computational Methods in Applied Sciences, ECCOMAS, New Computational Challenges in Materials, Structures, and Fluids (pp. 183–201). Springer Verlag. http://hdl.handle.net/20.500.12708/27381 ( reposiTUm)

Füssl, J. (2009). Prognose der Ermüdungs- und Festigkeitseigenschaften von Asphalt. In Funktionale Charakterisierung von Asphalt - Von den wissenschaftlichen Grundlagen zur baupraktischen Anwendung (pp. 75–80). Professur für Straßen- und Flugbetriebsflächenbau. http://hdl.handle.net/20.500.12708/26404 ( reposiTUm)

Blab, R., Füssl, J., Gagliano, B., Hessmann, T., & Kluger-Eigl, W. (Eds.). (2013). Beiträge zur Weiterentwicklung von Pflasterbefestigungen. Institut für Verkehrswissenschaften - Forschungsbereich Straßenwesen - Technische Universität Wien. http://hdl.handle.net/20.500.12708/23750 ( reposiTUm)

Füssl, J. (Ed.). (2011). Multiscale Fracture Modeling of Bituminous Mixtures - From Fatique Behavior to Ultimate Strength Properties of Asphalt Concrete. Institut für Verkehrswissenschaften, Forschungsbereich für Verkehrsplanung und Verkehrstechnik, Technische Universität Wien. http://hdl.handle.net/20.500.12708/23395 ( reposiTUm)

Aigner, E., Blab, R., Eberhardsteiner, J., Füssl, J., Hauser, E., Hoffmann, M., Hofko, B., Jäger, A., Kappl, K., Lackner, R., Spiegl, M., Stangl, K., Wagner, M., & Wistuba, M. (Eds.). (2009). Funktionale Charakterisierung von Asphalt - Von den wissenschaftlichen Grundlagen zur baupraktischen Anwendung. Professur für Straßen- und Flugbetriebsflächenbau. http://hdl.handle.net/20.500.12708/22923 ( reposiTUm)

Füssl, J., & Lukacevic, M. (Eds.). (2025). ECCOMAS Thematic Conference on Computational Methods in Wood Mechanics from Material Properties to Timber Structures : Program & Book of Abstracts. http://hdl.handle.net/20.500.12708/217495 ( reposiTUm)

Schwaighofer, M., Königsberger, M., Pech, S., Lukacevic, M., & Füssl, J. (2025, September). Deep Eshelby Network: An AI Framework for Multiscale Mean-Field Homogenization with Arbitrary Inclusion Shapes [Conference Presentation]. 10th ECCOMAS Thematic Conference on the Mechanical Response of Composites, Austria. http://hdl.handle.net/20.500.12708/219505 ( reposiTUm)

Schindler, J., Königsberger, M., Zelaya Lainez, L. H., Mariani, A., Nuvoli, D., & Füssl, J. (2025, July). Investigating the influence of delignification and polymer infiltration on wood cell wall properties via nanoindentation [Conference Presentation]. 21st International Confernce on Experimental Mechanics (ICEM21), Bologna, Italy. http://hdl.handle.net/20.500.12708/219508 ( reposiTUm)

Zelaya-Lainez, L. H., Schindler, J., Königsberger, M., Thirion, A., Hofegger, J., Pech, S., Mariani, A., Nuvoli, D., Balduzzi, G., Lahayne, O., Lukacevic, M., Hellmich, C., & Füssl, J. (2025, May). Novel Nanoindentation Protocol for Non-Embedded Spruce Wood and Analysis of Polymer Modified Birch [Conference Presentation]. Engineering Mechanics Institute 2025 Conference (EMI 2025), United States of America (the). ( reposiTUm)

Unsinn, G., Königsberger, M., Zelaya Lainez, L. H., Harter, T., Hirn, U., Füssl, J., & Lukacevic, M. (2025, June). Micromechanics Modeling of Pulp Fibers and Validation with Single Fiber Tensile Experiments [Conference Presentation]. WWSC International Conference 2025, Sweden. http://hdl.handle.net/20.500.12708/219714 ( reposiTUm)

Schwaighofer, M., Königsberger, M., Pech, S., Lukacevic, M., & Füssl, J. (2025, November 7). Deep Eshelby Network: An AI Framework for Multiscale Mean-Field Homogenization with Arbitrary Inclusion Shapes [Presentation]. 3rd Early Career Scientist Training Workshop on “Building Materials and Engineering Structures,” Wien, Austria. http://hdl.handle.net/20.500.12708/221164 ( reposiTUm)

Brandstätter, F., Autengruber, M., Lukacevic, M., & Füssl, J. (2024, June 5). Finite-Element-Based Prediction of Moisture Uptake and Dry-Out in CLT caused by End-Grain Sruface Infiltration [Conference Presentation]. ECCOMAS 2024 - 9th European Congress on Computational Methods in Applied Sciences and Engineering, Lissabon, Portugal. ( reposiTUm)

Senk, V., Königsberger, M., Lukacevic, M., & Füssl, J. (2024, June 5). Simulating Failure in Plant Fiber Composites: Analyzing the Interplay of Fiber, Matrix, and Interface Mechanics [Conference Presentation]. ECCOMAS 2024 - 9th European Congress on Computational Methods in Applied Sciences and Engineering, Lissabon, Portugal. http://hdl.handle.net/20.500.12708/206331 ( reposiTUm)

Königsberger, M., Reismüller, R., Buchner, T., Jäger, A., & Füssl, J. (2024, July). From microstructures of fired clay to the performance of clay block masonry [Conference Presentation]. 18th International Brick and Block Masonry Conference, United Kingdom of Great Britain and Northern Ireland (the). ( reposiTUm)

Lukacevic, M., Königsberger, M., Unsinn, G., Schwaighofer, M., Senk, V., Scolari, L., Hofbauer, C., Wahab, N., Ibadov, R., Zelaya-Lainez, L. H., Serna Loaiza, S., Harter, T., Harasek, M., & Füssl, J. (2024, August). Simulation-guided development concept for wood-based composites from sawmill byproducts [Poster Presentation]. Sustainable Materials Research Summit 2024, Finland. http://hdl.handle.net/20.500.12708/206324 ( reposiTUm)

Königsberger, M., Senk, V., Lukacevic, M., & Füssl, J. (2024, June 5). Influence of Fber Orientation and Fiber-Matrix Interface Compliance on Stiffness of Biocomposites: Insights from Micromechanics Multiscale Modeling [Conference Presentation]. 9th European Congress on Computational Methods in Applied Sciences and Engineering, Portugal. http://hdl.handle.net/20.500.12708/206325 ( reposiTUm)

Eberhardsteiner, J., & Füssl, J. (2024, September 17). Wood-based bio-composites: micromechanical modeling and innovative design concepts [Conference Presentation]. Conference Series: Sustainable Building with Wood - Competitive wood-based materials and timber structures, Sweden. http://hdl.handle.net/20.500.12708/207092 ( reposiTUm)

Königsberger, M., Senk, V., Lukacevic, M., Pech, S., & Füssl, J. (2024, July 22). Advanced multiscale modelling of plant fiber-reinforced biocomposites: bridging the gap in predictive analysis for sustainable construction materials [Conference Presentation]. 16th World Congress on Computational Mechanics and 4th Pan American Congress on Computational Mechanics, Vancouver, Canada. ( reposiTUm)

Zelaya-Lainez, L. H., Schwaighofer, M., Königsberger, M., Lukacevic, M., Lahayne, O., Serna Loaiza, S., Hofbauer, C., Scolari, L., Unsinn, G., Wahab, N., Ibadov, R., Zikeli Florian, Harasek, M., Friedl, A., & Füssl, J. (2024, September 26). Characterization of mechanical properties of five hot-pressed lignins extracted from different feedstocks by load-controlled nanoindentation [Poster Presentation]. 40th Danubia-Adria Symposium on Advances in Experimental Mechanics, Poland. http://hdl.handle.net/20.500.12708/210963 ( reposiTUm)

Ibadov, R., Zikeli, F. M., Serna Loaiza, S., Harter, T., Zelaya Lainez, L. H., Füssl, J., Lukacevic, M., & Harasek, M. (2024, July 14). Modified Lignin as a Binder in Hot-Pressed Biocomposites: Fractionation and Maleation [Poster Presentation]. Gordon Research Conference - Lignin, Stonehill College, United States of America (the). http://hdl.handle.net/20.500.12708/199990 ( reposiTUm)

Scolari, L., Zikeli, F. M., Schindler, J., Zelaya-Lainez, L., Unsinn, G., Hofbauer, C., Serna-Loaiza, S., Grothe, H., Friedl, A., Füssl, J., Lukacevic, M., Potthast, A., & Harasek, M. (2024, August). Enhancing Wood-based Biocomposite with Technical Lignin: A Comparative Analysis of Adhesion Performance [Poster Presentation]. 17th European Workshop on Lignocellulosics and Pulp, Turku, Finland. http://hdl.handle.net/20.500.12708/206328 ( reposiTUm)

Hofbauer, C., Serna Loaiza, S., Zelaya Lainez, L. H., Harter, T., Hirn, U., Scolari, L., Füssl, J., Lukacevic, M., & Harasek, M. (2024, September 11). Influence of swelling spruce fibers with different organic and inorganic solvents [Conference Presentation]. 19th Conference on Sustainable Development of Energy, Water and Environment Systems (SDEWES 2024), Rom, Italy. https://doi.org/10.34726/7301 ( reposiTUm)

Hofbauer, C., Serna Loaiza, S., Harter, T., Zelaya-Lainez, L., Scolari, L., Jordan, C., Hirn, U., Füssl, J., Lukacevic, M., & Harasek, M. (2024, August 28). Tailored holocellulose fibers from spruce wood chips: Influence of temperature in peracetic acid pulping [Poster Presentation]. 17th European Workshop on Lignocellulosics and Pulp, Turku, Finland. https://doi.org/10.34726/7400 ( reposiTUm)

Schwaighofer, M., Zelaya Lainez, L. H., Königsberger, M., Lukacevic, M., Serna Loaiza, S., Harasek, M., Zikeli, F. M., Friedl, A., Lahayne, O., Senk, V., & Füssl, J. (2023, November 10). Characterization of Mechanical Properties of Five Hot-Pressed Lignins Extracted from Different Feedstocks by Micromechanics-Guided Nanoindentation [Presentation]. Early Career Scientist Training Workshop on “Building Materials and Engineering Structures,” Wien, Austria. ( reposiTUm)

Zelaya Lainez, L. H., Schwaighofer, M., Königsberger, M., Lukacevic, M., Lahayne, O., Harter, T., Serna Loaiza, S., Hofbauer, C., Zikeli, F. M., Harasek, M., Friedl, A., Scolari, L., Grothe, H., & Füssl, J. (2023, September). Characterization of mechanical properties of five hot-pressed lignins extracted from different feedstocks by load-controlled nanoindentation [Poster Presentation]. 39th Danubia-Adria Symposium on Advances in Experimental Mechanics 2023, Siofok, Hungary. ( reposiTUm)

Füssl, J., Lukacevic, M., Brandstätter, F., Vida, C., Pech, S., Autengruber, M., & Eberhardsteiner, J. (2023, September 6). Advanced Concepts for Modelling Failure and Transport Processes in Wood and Wood-Based Products [Keynote Presentation]. ECCOMAS Thematic conference on Computational Methods in Wood Mechanics (CompWood 2023), Dresden, Germany. http://hdl.handle.net/20.500.12708/188378 ( reposiTUm)

Hofbauer, C., Serna Loaiza, S., Zelaya Lainez, L. H., Scolari, L., Zikeli, F. M., Füssl, J., Lukacevic, M., Grothe, H., Fiskari, J., Friedl, A., & Harasek, M. (2023, September 25). Influence of the lignin content as a natural adhesive in biocomposites using holocellulose and Asplund fibers from spruce wood [Conference Presentation]. 18th Conference on Sustainable Development of Energy, Water and Environment Systems (SDEWES2023), Dubrovnik, Croatia. http://hdl.handle.net/20.500.12708/190141 ( reposiTUm)

Schwaighofer, M., Zelaya Lainez, L. H., Königsberger, M., Lukacevic, M., Serna Loaiza, S., Harasek, M., Lahayne, O., Senk, V., & Füssl, J. (2022, September 0). Characterization of Elastic Properties from Technical Lignins by Light Microscopy Aided Nanoindentation [Poster Presentation]. 38th Danubia-Adria Symposium on Advances in Experimental Mechanics, Greece. ( reposiTUm)

Lukacevic, M., Vida, C., & Füssl, J. (2022, July). Modeling Approach to Estimate the Bending Strength and Height Effect of Glued Laminated Timber Beams [Conference Presentation]. 15th World Congress on Computational Mechanics (WCCM-XV), 8th Asian Pacific Congress on Computational Mechanics (APCOM-VIII), Yokohama, Japan. ( reposiTUm)

Lukacevic, M., Vida, C., & Füssl, J. (2022, June 1). Modeling Concept for the Estimation of Bending Strength and Height Effect of Glued Laminated Timber Beams [Conference Presentation]. Engineering Mechanics Institute Conference 2022 (EMI 2022) (EMI 2022), Baltimore, United States of America (the). http://hdl.handle.net/20.500.12708/187420 ( reposiTUm)

Lukacevic, M., Autengruber, M., Pech, S., Brandstätter, F., & Füssl, J. (2022, June). Structural Performance Accessed by Computational Mechanics [Conference Presentation]. ForestValue Conference, Skelleftea, Sweden. ( reposiTUm)

Pech, S., Lukacevic, M., & Füssl, J. (2022, June 6). Phase Field Method-Based Modeling of Fracture in Wood [Conference Presentation]. 8th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS2022), Oslo, Norway. http://hdl.handle.net/20.500.12708/187404 ( reposiTUm)

Autengruber, M., Lukacevic, M., & Füssl, J. (2022, July). Long-Term Hygromechanical Behavior of Wood Exposed to Changing Climatic Conditions [Conference Presentation]. 15th World Congress on Computational Mechanics (WCCM-XV), 8th Asian Pacific Congress on Computational Mechanics (APCOM-VIII), Yokohama, Japan. ( reposiTUm)

Vida, C., Lukacevic, M., & Füssl, J. (2022, June 0). Modeling Approach to Estimate the Bending Strength and Height Effect of Glued Laminated Timber Beams [Conference Presentation]. 8th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS2022), Oslo, Norway, Sweden. ( reposiTUm)

Pech, S., Lukacevic, M., & Füssl, J. (2022, July). Phase Field Method-Based Modeling of Fracture in Wood [Conference Presentation]. 15th World Congress on Computational Mechanics (WCCM-XV), 8th Asian Pacific Congress on Computational Mechanics (APCOM-VIII), Yokohama, Japan. ( reposiTUm)

Füssl, J. (2022, January 10). Berechenbarkeit von Holz - Von der Mikrostruktur bis zur Baukonstruktion [Presentation]. Universitöt Innsbruck, Innsbruck, Austria. ( reposiTUm)

Pech, S., Lukacevic, M., & Füssl, J. (2022, June 1). Phase Field Method-Based Modeling of Fracture in Wood [Conference Presentation]. Engineering Mechanics Institute Conference 2022 (EMI 2022) (EMI 2022), Baltimore, United States of America (the). http://hdl.handle.net/20.500.12708/187421 ( reposiTUm)

Zelaya Lainez, L. H., Balduzzi, G., Hellmich, C., & Füssl, J. (2022, May). Micomechanics of NonEmbedded Spruce Wood: Novel Polishing and Indentation Protocol [Conference Presentation]. Engineering Mechanics Institute Conference 2022 (EMI 2022), United States of America (the). http://hdl.handle.net/20.500.12708/123543 ( reposiTUm)

Azinovic, B., Serrano, E., Danielsson, H., Füssl, J., Lukacevic, M., Dietsch, P., Arnold, M., Schenk, M., Cabrero, J. M., Gonzalez Serna, P., & Pazlar, T. (2022, June 10). Innovative Solutions for CLT Structures [Conference Presentation]. 2. Fórum Internacional de Construccion con Madera, Pamplona, Spain. http://hdl.handle.net/20.500.12708/187402 ( reposiTUm)

Pech, S., Lukacevic, M., & Füssl, J. (2021). Phase field method-based modeling of fracture in wood. 16. International Conference on Computational Plasticity, Fundamentals and Applications, Barcelona, Spain. http://hdl.handle.net/20.500.12708/115655 ( reposiTUm)

Füssl, J. (2021). A Multiscale Model for Fired Clay Brick Masonry: Upscaling of Experimentally Identified Microstructural Features to Macroscopic Elastic Stiffness and Thermal Conductivity. International Symposium on Interdisciplinary Research in Civil Engineering Sciences (IS-IRCES), Vienna, Austria & Shanghai, China, Unknown. http://hdl.handle.net/20.500.12708/115578 ( reposiTUm)

Buchner, T., Kiefer, T., Zelaya-Lainez, L., Gaggl, W., & Füssl, J. (2021). A Multitechnique Characterization and Quantification of the Microstructures of Bricks Made of Different Clayey Raw Materials. 37th Danubia-Adria Symposium on Advances in Experimental Mechanics, Johannes Kepler University, Linz,, Austria. http://hdl.handle.net/20.500.12708/115572 ( reposiTUm)

Suda, R., Kiefer, T., Buchner, T., Schranz, C., & Füssl, J. (2021). A Multiscale Model for Brick Masonry with Special Focus on Bed Joint Reinforcement. 14th World Congress in Computational Mechanics (WCCM) & ECCOMAS Congress 2020, virtual Congress, Unknown. http://hdl.handle.net/20.500.12708/115712 ( reposiTUm)

Lukacevic, M., Füssl, J., Pech, S., & Eberhardsteiner, J. (2019). Simulation of Failure Mechanisms in Wooden Boards with Knots as a Basis for Timber Engineering Design Cencepts. Engineering Mechanics Institute 2019 Conference, Pasadena, CA, United States of America (the). http://hdl.handle.net/20.500.12708/115099 ( reposiTUm)

Füssl, J. (2019). A Review of Computational Methods to Describe the Strength and Failure Behavior of Wood and Wood-Based Products and Their Embedment into a Holistic Design Approach. International Conference on Computational Methods in Wood Mechanics - From Material Properties to Timber Structures (CompWood 2019), Växjo, Sweden. http://hdl.handle.net/20.500.12708/115190 ( reposiTUm)

Füssl, J. (2019). An Algorithm for Adaptive Introduction and Arrangement of Velocity Discontinuities within 3D Finite-Element-Based Upper Bound Limit Analysis Approaches and Its Application to Cross Laminated Timber Plates. XV. International Conference on Computational Plasticity - Fundamentals and Applications (COMPLAS 2019), Barcelona, Spain. http://hdl.handle.net/20.500.12708/115046 ( reposiTUm)

Füssl, J. (2018). Computational Modelling of the Mechanical Behaviour of Wood and Masonry - From the Microstructure up to the Building Element Scale. Seminar Lecture by the Institute of Materials Chemistry, TU Wien, Vienna, Austria, Austria. http://hdl.handle.net/20.500.12708/114782 ( reposiTUm)

Füssl, J. (2018). Making Wood Predictable Through Computational Methods - How and Why? Symposium Perspectives in Renewables, BOKU - University of Natural Resources and Life Sciences, Vienna, Austria, Austria. http://hdl.handle.net/20.500.12708/114784 ( reposiTUm)

Füssl, J. (2018). Three Trends in Mechanical Modelling of Materials. WKO - The Future of Building Conference, Vienna, Austria, Austria. http://hdl.handle.net/20.500.12708/114785 ( reposiTUm)

Füssl, J. (2018). Computational Modelling of Wood and Wood-Based Products with Special Focus on Numerical Limit Analysis Concepts. 6th European Conference on Computational Fluid Dynamics (ECCM - ECFD 2018), Glasgow, United Kingdom of Great Britain and Northern Ireland (the). http://hdl.handle.net/20.500.12708/114783 ( reposiTUm)

Eberhardsteiner, J., & Füssl, J. (2017). Berechenbarkeit von Holz - Von der Mikrostruktur zur Baukonstruktion. Österreichische Akademie der Wissenschaften (math.-nat. Klasse), Wien, Austria. http://hdl.handle.net/20.500.12708/114236 ( reposiTUm)

Füssl, J. (2017). Experimental and Numerical Investigations on the Mechanical Behavior of Glued Laminated Timber. Conference on Computaional Methods in Wood Mechanics - From Material Properties to Timber Structures (CompWood 2017), Vienna, Austria, Austria. http://hdl.handle.net/20.500.12708/114255 ( reposiTUm)

Grothe, H., Handle, F., Harir, M., Füssl, J., Koyun, A., Großegger, D., Hertkorn, N., Eberhardsteiner, L., Hofko, B., Hospodka, M., Blab, R., & Schmitt-Kopplin, P. (2016). Tracking Ageing of Bitumen and its SARA Fractions Using High-Field FT-ICR Mass Spectrometry. 53rd Petersen Asphalt Research Conference, Jackson, Wyoming, United States of America (the). http://hdl.handle.net/20.500.12708/100022 ( reposiTUm)

Füssl, J. (2016). Computational Mechanical Modelling of Wood and Wood-Based Products. Symposium on Geometry and Computational Design (GCD3), Vienna, Austria, Austria. http://hdl.handle.net/20.500.12708/113995 ( reposiTUm)

Füssl, J. (2016). Three Different Methods for Predicting the Strength Behavior of Clear Wood - A Performance Comparison and Basis for a Combined Approach. World Conference on Timber Engineering (WCTE 2016), Vienna, Austria, Austria. http://hdl.handle.net/20.500.12708/113927 ( reposiTUm)

Kariem, H., Hellmich, C., & Füssl, J. (2016). Dual-Scale Porosity Analysis of Fired-Clay Bricks with Different Pore-Forming Agents and Concentrations. 33rd Danubia-Adria Symposium on Advances in Experimental Mechanics, Portoroz, Slovenia. http://hdl.handle.net/20.500.12708/113962 ( reposiTUm)

Füssl, J. (2016). Computational Mechanical Modelling of Wood and Wood-Based Products. Civil Engineering Group Seminar, University of Oxford, Oxford, United Kingdom of Great Britain and Northern Ireland (the). http://hdl.handle.net/20.500.12708/114056 ( reposiTUm)

Füssl, J. (2016). A Mechanical Modeling Approach for Wood-Based Products Taking the Wooden Microstructure into Account. 7th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS Congress 2016), Kreta, Greece. http://hdl.handle.net/20.500.12708/113884 ( reposiTUm)

Füssl, J. (2015). Bessere Berechenbarkeit von Holzmaterialien - was bringt das dem Holzbau? HOLZBAU Messe und Kongress Salzburg 2015, Salzburg, Austria, Austria. http://hdl.handle.net/20.500.12708/113683 ( reposiTUm)

Füssl, J. (2015). A Comprehensive Mechanical Modeling Approach for the Optimization of Wood-Based Products. EUROMECH Colloquium 556 - Theoretical, Numerical, and Experimental Analyses in Wood Mechanics, Dresden, Germany. http://hdl.handle.net/20.500.12708/113455 ( reposiTUm)

Kluger-Eigl, W., Füssl, J., & Blab, R. (2015). Experimental Identification of Joint Interaction of Paving Blocks with Sand Filled Joints. ICCBP 11th International Conference on Concrete Block Pavement, Dresden, Germany. http://hdl.handle.net/20.500.12708/113572 ( reposiTUm)

Füssl, J. (2014). Multiscale Fracture Modelling of Bituminous Mixtures - From Fatigue Behaviour to Ultimate Strength Properties of Asphalt Concrete. RILEM Technical Committee 241-MCD, Annual Joint Meeting, Vienna, Austria. http://hdl.handle.net/20.500.12708/113267 ( reposiTUm)

Hofko, B., Eberhardsteiner, L., Füssl, J., & Blab, R. (2014). New Insights on Ageing of Bitumen by Micromechanical and Multiscale Modelling & Asphalt Mix Design Optimization and Specification by Performance Based Testing. SIIV Summer School, Bologna, Italy. http://hdl.handle.net/20.500.12708/113155 ( reposiTUm)

Hofko, B., Eberhardsteiner, L., Füssl, J., & Blab, R. (2014). Analysis of Binder Ageing by Micromechanical & Multiscale Modeling. 3rd China-Europe Workshop on Functional Pavements, Aachen, Germany. http://hdl.handle.net/20.500.12708/113153 ( reposiTUm)

Füssl, J. (2014). A Probabilistic Model to Account for Stiffness Variation in Glued Laminated Timber. 11th World Congress on Computational Mechanics (WCCM XI) & 5th European Conference on Computational Mechanics (ECCM V) & 6th European Conference on Computational Fluid Dynamics (ECFD VI), Barcelona, Spain. http://hdl.handle.net/20.500.12708/113234 ( reposiTUm)

Hofko, B., Blab, R., Eberhardsteiner, L., Füssl, J., Grothe, H., Handle, F., & Hospodka, M. (2014). Aktuelle Erkenntnisse zum Alterungsverhalten von Bitumen und Asphalt. IGV-Symposium 2014, St. Petersburg, Russian Federation (the). http://hdl.handle.net/20.500.12708/113154 ( reposiTUm)

Füssl, J. (2012). Numerical Simulation Tool for Slab and Block Pavements Validated by Means of Large-Scale Accelerated Pavement Tests. 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012), Wien, Austria. http://hdl.handle.net/20.500.12708/112446 ( reposiTUm)

Blab, R., Füssl, J., Eberhardsteiner, L., & Lackner, R. (2012). Multiscal Modeling of Asphalt Mastics. 2nd International Workshop on Asphalt Mastics, Delft, Netherlands (the). http://hdl.handle.net/20.500.12708/112443 ( reposiTUm)

Füssl, J. (2011). Micromechanical Model for the Description of Fatique Behavior of Asphalt Mixtures. 18th Inter-Institute Seminar for Young Researchers, Budapest, Hungary, EU. http://hdl.handle.net/20.500.12708/112013 ( reposiTUm)

Blab, R., Kluger-Eigl, W., & Füssl, J. (2010). Bautechnisch Optimierte Oberbauten mit Pflaster unter Einsatz der Einstein Fugentechnik. Lange Nacht der Forschung 2010, Klagenfurt, Austria. http://hdl.handle.net/20.500.12708/111782 ( reposiTUm)

Füssl, J. (2009). Prognose der Ermüdungs- und Festigkeitseigenschaften von Asphalt. Veranstaltung zum Abschluss des Christian Doppler Laboratoriums für Gebrauchsverhaltensorientierte Optimierung flexibler Straßenbefestigungen, TU Wien, Austria. http://hdl.handle.net/20.500.12708/111193 ( reposiTUm)

Füssl, J. (2008). Homogenisierung von Festigkeitseigenschaften von Kompositen mittels Traglastanalyse / Ermüdungsmodell für Asphalt. Workshop Asphalt, Dresden, Germany, EU. http://hdl.handle.net/20.500.12708/111062 ( reposiTUm)

Füssl, J. (2008). Limit-Analysis Based Identification of Fracture and Degradation Mechanisms in Two-Phase Composite Materials. 6th International Conference on Computation of Shell and Spatial Structures (IASS-IACM 2008), Ithaca, N.Y., USA, Non-EU. http://hdl.handle.net/20.500.12708/110840 ( reposiTUm)

Füssl, J. (2008). Limit Analysis Based Upscaling of Strength Properties and Investigation of Failure Modes of Two-Phase Materials. 8th World Congress on Computational Mechanics (WCCM VIII) and 5th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008), Venice, EU. http://hdl.handle.net/20.500.12708/110862 ( reposiTUm)

Füssl, J. (2007). Limit-Analysis Based Upscaling of Strength Properties of Matrix-Inclusion Materials. International Conference on Advanced Characterisation of Pavement and Soil Engineering Materials, Athen, EU. http://hdl.handle.net/20.500.12708/111058 ( reposiTUm)

Füssl, J. (2007). Upscalling Strength Properties of Asphalt. Scientific Evaluation of the CD-Laboratory for Performance-based Optimization of Flexible Road Pavements, Wien, Austria. http://hdl.handle.net/20.500.12708/111061 ( reposiTUm)

Füssl, J. (2007). Limit-Analysis Based Upscaling of Strength Properties of Matrix-Inclusion Materials. 16th Inter-Institute Seminar for Young Researchers, Vienna, Austria, Austria. http://hdl.handle.net/20.500.12708/110471 ( reposiTUm)

Kluger-Eigl, W., Hengl, H., Blab, R., & Füssl, J. (2017). Residenzplatz Salzburg Pflasterplattendimensionierung (No. 1395303). http://hdl.handle.net/20.500.12708/39222 ( reposiTUm)

Kluger-Eigl, W., Blab, R., Gagliano, B., Hengl, H., & Füssl, J. (2016). CR-Projekt Pflasterbauweisen - 3. Forschungsjahr. http://hdl.handle.net/20.500.12708/39144 ( reposiTUm)

Kluger-Eigl, W., Blab, R., Hessmann, T., Gagliano, B., Füssl, J., & Hengl, H. (2015). CR-Projekt Pflasterbauweisen - 2. Forschungsjahr. http://hdl.handle.net/20.500.12708/38496 ( reposiTUm)

Blab, R., Kluger-Eigl, W., & Füssl, J. (2014). Fußgängerezone Meidlinger Hauptstraße - Oberbaudimensionierung mit einer Pflasterplattendecke. http://hdl.handle.net/20.500.12708/38024 ( reposiTUm)

Blab, R., Kluger-Eigl, W., Füssl, J., Hessmann, T., & Gagliano, B. (2014). CR-Projekt Pflasterbauweisen - 1. Forschungsjahr. http://hdl.handle.net/20.500.12708/38023 ( reposiTUm)

Hofko, B., Eberhardsteiner, L., Füssl, J., Handle, F., Hospodka, M., Steiner, D., Blab, R., & Grothe, H. (2014). Endbericht zum FFG-Bridge Projekt “Oekophalt” (No. 3). http://hdl.handle.net/20.500.12708/38189 ( reposiTUm)

Hofko, B., Blab, R., Eberhardsteiner, L., Füssl, J., Grothe, H., Handle, F., & Hospodka, M. (2013). 1. Zwischenbericht des FFG-Bridge Projekts “Oekophalt” (No. 01). http://hdl.handle.net/20.500.12708/37799 ( reposiTUm)

Hofko, B., Blab, R., Eberhardsteiner, L., Füssl, J., Grothe, H., Handle, F., & Hospodka, M. (2013). 2. Zwischenbericht des FFG-Bridge Projekts “Oekophalt” (No. 02). http://hdl.handle.net/20.500.12708/37800 ( reposiTUm)

Blab, R., Kluger-Eigl, W., & Füssl, J. (2013). Bautechnisch optimierte Oberbauten mit Pflasterdecken unter Einsatz des Einstein-Systems - Phase 3. http://hdl.handle.net/20.500.12708/37856 ( reposiTUm)

Blab, R., Kluger-Eigl, W., Füssl, J., & Eberhardsteiner, L. (2012). Bautechnisch optimierte Oberbauten mit Pflasterdecken unter Einsatz des Einstein-Systems - Phase 2. http://hdl.handle.net/20.500.12708/37459 ( reposiTUm)

Kluger-Eigl, W., Bader, T., & Füssl, J. (2012). Ultraschallprüfungen Vorsatz- und Kernbeton. http://hdl.handle.net/20.500.12708/37461 ( reposiTUm)

Blab, R., Kluger-Eigl, W., & Füssl, J. (2011). Ergänzende Ultraschallmessungen Vorsatz- und Kernbeton (No. 11506). http://hdl.handle.net/20.500.12708/37048 ( reposiTUm)

Blab, R., Buchta, M., & Füssl, J. (2010). Zustandserfassung, materialtechnische Untersuchungen am Bestand und Ausarbeitung von Instandsetzungsvarianten, A4 Ostautobahn Abschnitt Neusiedl-Staatsgrenze Nicklsdorf (No. 10501). http://hdl.handle.net/20.500.12708/36730 ( reposiTUm)

Blab, R., Kluger-Eigl, W., Füssl, J., Burtscher, S., & Hecht, C. (2010). Bautechnisch optimierte Oberbauten mit Pflasterdecken unter Einsatz des Einstein-Systems - Phase 1. http://hdl.handle.net/20.500.12708/36662 ( reposiTUm)

Füssl, J. (2017). Novel computational mechanics approaches for wood, asphalt concrete, and paving block constructions [Professorial Dissertation, Technische Universität Wien]. reposiTUm. http://hdl.handle.net/20.500.12708/159413 ( reposiTUm)

Füssl, J. (2010). Multiscale fracture modeling of bituminous mixtures : from fatigue behavior to ultimate strength properties of asphalt concrete [Dissertation, Technische Universität Wien]. reposiTUm. http://hdl.handle.net/20.500.12708/161610 ( reposiTUm)

Füssl, J. (2006). Limit analysis for upscaling of strength properties of asphalt [Diploma Thesis, Technische Universität Wien]. reposiTUm. http://hdl.handle.net/20.500.12708/182954 ( reposiTUm)