Synek, A., Schwarz, G. M., Reisinger, A., Huber, S., Nürnberger, S., Hirtler, L., Hofstaetter, J. G., & Pahr, D. H. (2025). Femoral strength after cephalomedullary nail removal can be predicted preoperatively using CT based FE models. Scientific Reports, 15, Article 19969. https://doi.org/10.1038/s41598-025-02424-x ( reposiTUm)

Stefanek, P., Silva-Henao, J. D., Fiedler, V., Reisinger, A. G., Pahr, D. H., & Synek, A. (2025). Screw pull-out force predictions in porcine radii using efficient nonlinear µFE models including contact and pre-damage. Frontiers in Bioengineering and Biotechnology, 13, Article 1524235. https://doi.org/10.3389/fbioe.2025.1524235 ( reposiTUm)

Reisinger, A., Bittner-Frank, M., Thurner, P. J., & Pahr, D. H. (2024). The 2-layer elasto-visco-plastic rheological model for the material parameter identification of bone tissue extended by a damage law. Journal of the Mechanical Behavior of Biomedical Materials, 150, Article 106259. https://doi.org/10.1016/j.jmbbm.2023.106259 ( reposiTUm)

Bittner-Frank, M., Reisinger, A., Andriotis, O., Pahr, D. H., & Thurner, P. J. (2024). Cortical and trabecular mechanical properties in the femoral neck vary differently with changes in bone mineral density. JBMR Plus, 8(6), 1–15. https://doi.org/10.1093/jbmrpl/ziae049 ( reposiTUm)

Silva Henao, J. D., Schober, S., Pahr, D. H., & Reisinger, A. G. (2024). Critical loss of primary implant stability in osteosynthesis locking screws under cyclic overloading. MEDICAL ENGINEERING & PHYSICS, 126, 1–11. https://doi.org/10.1016/j.medengphy.2024.104143 ( reposiTUm)

Warnung, L., Sattler, S., Haiden, E., Schober, S., Pahr, D. H., & Reisinger, A. (2023). A mechanically validated open-source silicone model for the training of gastric perforation sewing. BMC Medical Education, 23, Article 261. https://doi.org/10.1186/s12909-023-04174-8 ( reposiTUm)

Amini, M., Reisinger, A., Synek, A., Hirtler, L., & Pahr, D. (2023). The predictive ability of a QCT-FE model of the proximal femoral stiffness under multiple load cases is strongly influenced by experimental uncertainties. Journal of the Mechanical Behavior of Biomedical Materials, 139, Article 105664. https://doi.org/10.1016/j.jmbbm.2023.105664 ( reposiTUm)

Zupancic Cepic, L., Frank, M., Reisinger, A. G., Sagl, B., Pahr, D. H., Zechner, W., & Schedle, A. (2022). Experimental validation of a micro-CT finite element model of a human cadaveric mandible rehabilitated with short-implant-supported partial dentures. Journal of the Mechanical Behavior of Biomedical Materials, 126(105033), 105033. https://doi.org/10.1016/j.jmbbm.2021.105033 ( reposiTUm)

Estermann, S.-J., Pahr, D. H., & Reisinger, A. (2022). Material design of soft biological tissue replicas using viscoelastic micromechanical modelling. Journal of the Mechanical Behavior of Biomedical Materials, 125(104875), 104875. https://doi.org/10.1016/j.jmbbm.2021.104875 ( reposiTUm)

Werner, B., Červinek, O., Koutný, D., Reisinger, A., Pettermann, H. E., & Todt, M. (2022). Numerical and experimental study on the collapse of a triangular cell under compression. International Journal of Solids and Structures, 236–237(111295), 111295. https://doi.org/10.1016/j.ijsolstr.2021.111295 ( reposiTUm)

Silva-Henao, J. D., Synek, A., Pahr, D., & Reisinger, A. (2022). Selection of animal bone surrogate samples for orthopaedic screw testing based on human radius CT-derived bone morphology. Medical Engineering and Physics, 103, Article 103786. https://doi.org/10.1016/j.medengphy.2022.103786 ( reposiTUm)

Nägl, K., Reisinger, A., & Pahr, D. (2022). The biomechanical behavior of 3D printed human femoral bones based on generic and patient-specific geometries. 3D Printing in Medicine, 8, Article 35. https://doi.org/10.1186/s41205-022-00162-8 ( reposiTUm)

Zupancic Cepic, L., Frank, M., Reisinger, A., Pahr, D., Zechner, W., & Schedle, A. (2022). Biomechanical finite element analysis of short-implant-supported, 3-unit, fixed CAD/CAM prostheses in the posterior mandible. International Journal of Implant Dentistry, 8(1), Article 8. https://doi.org/10.1186/s40729-022-00404-8 ( reposiTUm)

Aryeetey, O. J., Frank, M., Lorenz, A., Estermann, S.-J., Reisinger, A., & Pahr, D. H. (2022). A parameter reduced adaptive quasi-linear viscoelastic model for soft biological tissue in uniaxial tension. Journal of the Mechanical Behavior of Biomedical Materials, 126, Article 104999. https://doi.org/10.1016/j.jmbbm.2021.104999 ( reposiTUm)

Streicher, J., Reisinger, A., Warnung, L., & Pahr, D. (2022). 3D‐Printing Offers Dry Replication and New Insight into Unique Museum Specimens. FASEB Journal, 36(S1). https://doi.org/10.1096/fasebj.2022.36.S1.R2197 ( reposiTUm)

Frank, M., Reisinger, A. G., Pahr, D. H., & Thurner, P. J. (2021). Effects of Osteoporosis on Bone Morphometry and Material Properties of Individual Human Trabeculae in the Femoral Head. JBMR Plus, 5(6). https://doi.org/10.1002/jbm4.10503 ( reposiTUm)

Frank, M., Grabos, A., Reisinger, A. G., Burr, D. B., Pahr, D. H., Allen, M. R., & Thurner, P. J. (2021). Effects of anti-resorptive treatment on the material properties of individual canine trabeculae in cyclic tensile tests. Bone, 150(115995), 115995. https://doi.org/10.1016/j.bone.2021.115995 ( reposiTUm)

Estermann, S.-J., Förster-Streffleur, S., Hirtler, L., Streicher, J., Pahr, D. H., & Reisinger, A. (2021). Comparison of Thiel preserved, fresh human, and animal liver tissue in terms of mechanical properties. Annals of Anatomy, 236(151717), 151717. https://doi.org/10.1016/j.aanat.2021.151717 ( reposiTUm)

Amini, M., Reisinger, A., Hirtler, L., & Pahr, D. (2021). Which experimental procedures influence the apparent proximal femoral stiffness? A parametric study. BMC Musculoskeletal Disorders, 22(815). https://doi.org/10.1186/s12891-021-04656-0 ( reposiTUm)

Amraish, N., Reisinger, A., & Pahr, D. (2021). A novel specimen shape for measurement of linear strain fields by means of digital image correlation. Scientific Reports, 11(17515). https://doi.org/10.1038/s41598-021-97085-x ( reposiTUm)

Amraish, N., Reisinger, A., & Pahr, D. H. (2021). A novel specimen shape for measurement of linear strain fields by means of digital image correlation. Scientific Reports, 11, 1–13. https://doi.org/10.1038/s41598-021-97085-x ( reposiTUm)

Iori, G., Schneider, J., Reisinger, A., Heyer, F., Peralta, L., Wyers, C., Glüer, C. C., van den Bergh, J. P., Pahr, D., & Raum, K. (2020). Cortical thinning and accumulation of large cortical pores in the tibia reflect local structural deterioration of the femoral neck. Bone, 137(115446), 115446. https://doi.org/10.1016/j.bone.2020.115446 ( reposiTUm)

Reisinger, A. G., Frank, M., Thurner, P. J., & Pahr, D. H. (2020). A two-layer elasto-visco-plastic rheological model for the material parameter identification of bone tissue. Biomechanics and Modeling in Mechanobiology, 19(6), 2149–2162. https://doi.org/10.1007/s10237-020-01329-0 ( reposiTUm)

Estermann, S.-J., Pahr, D. H., & Reisinger, A. (2020). Quantifying tactile properties of liver tissue, silicone elastomers, and a 3D printed polymer for manufacturing realistic organ models. Journal of the Mechanical Behavior of Biomedical Materials, 104(103630), 103630. https://doi.org/10.1016/j.jmbbm.2020.103630 ( reposiTUm)

Amraish, N., Reisinger, A., & Pahr, D. H. (2020). Robust Filtering Options for Higher-Order Strain Fields Generated by Digital Image Correlation. Applied Mechanics, 1(4), 174–192. https://doi.org/10.3390/applmech1040012 ( reposiTUm)

Iori, G., Peralta, L., Reisinger, A., Heyer, F., Wyers, C., van den Bergh, J., Pahr, D., & Raum, K. (2020). Femur strength predictions by nonlinear homogenized voxel finite element models reflect the microarchitecture of the femoral neck. Medical Engineering and Physics, 79, 60–66. https://doi.org/10.1016/j.medengphy.2020.03.005 ( reposiTUm)

Estermann, S.-J., Pahr, D. H., & Reisinger, A. (2020). Hyperelastic and viscoelastic characterization of hepatic tissue under uniaxial tension in time and frequency domain. Journal of the Mechanical Behavior of Biomedical Materials, 112(104038), 104038. https://doi.org/10.1016/j.jmbbm.2020.104038 ( reposiTUm)

Pahr, D. H., & Reisinger, A. G. (2020). A Review on Recent Advances in the Constitutive Modeling of Bone Tissue. Current Osteoporosis Reports, 18(6), 696–704. https://doi.org/10.1007/s11914-020-00631-1 ( reposiTUm)

Amini, M., Reisinger, A., & Pahr, D. H. (2020). Influence of processing parameters on mechanical properties of a 3D‐printed trabecular bone microstructure. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 108(1), 38–47. https://doi.org/10.1002/jbm.b.34363 ( reposiTUm)

Iori, G., Schneider, J., Reisinger, A., Heyer, F., Peralta, L., Wyers, C., Gräsel, M., Barkmann, R., Glüer, C. C., van den Bergh, J. P., Pahr, D., & Raum, K. (2019). Large cortical bone pores in the tibia are associated with proximal femur strength. PLoS ONE, 14(4), e0215405. https://doi.org/10.1371/journal.pone.0215405 ( reposiTUm)

Benca, E., Reisinger, A. G., Patsch, J., Hirtler, L., Synek, A., Stenicka, S., Windhager, R., Mayr, W., & Pahr, D. H. (2017). Effect of Simulated Metastatic Lesions on the Biomechanical Behavior on the Proximal Femur. Journal of Orthopaedic Research, 35(11), 2407–2414. http://hdl.handle.net/20.500.12708/147020 ( reposiTUm)

Cejka, D., Parada-Rodriguez, D., Pichler, S., Marculescu, R., Kramer, I., Kneissel, M., Gross, T., Reisinger, A. G., Pahr, D. H., Monier-Faugere, M.-C., Haas, M., & Malluche, H. H. (2016). Only minor differences in renal osteodystrophy features between wild-type and sclerostin knockout mice with chronic kidney disease. Kidney International, 90(4), 828–834. https://doi.org/10.1016/j.kint.2016.06.019 ( reposiTUm)

SPIESZ, E. M., REISINGER, A. G., ROSCHGER, P., & ZYSSET, P. K. (2014). Experimental Validation of a Mean Field Model of Mineralized Collagen Fiber Arrays at Two Levels of Hierarchy. Journal of Mechanics in Medicine and Biology, 14(02), 1450013. https://doi.org/10.1142/s0219519414500134 ( reposiTUm)

Farahmand, P., Marin, F., Hawkins, F., Möricke, R., Ringe, J.-D., Glüer, C. C., Papaioannou, N., Minisola, S., Martínez, G., Nolla, J. M., Niedhart, C., Guañabens, N., Nuti, R., Martín-Mola, E., Thomasius, F., Peña, J. A., Graeff, C., Kapetanos, G., Petto, H., … Zysset, P. K. (2013). Early changes in biochemical markers of bone formation during teriparatide therapy correlate with improvements in vertebral strength in men with glucocorticoid-induced osteoporosis. Osteoporosis International, 24(12), 2971–2981. https://doi.org/10.1007/s00198-013-2379-5 ( reposiTUm)

Graeff, C., Marin, F., Petto, H., Kayser, O., Reisinger, A., Peña, J., Zysset, P., & Glüer, C.-C. (2013). High-Resolution Quantitative Computed Tomography-Based Assessment of Trabecular Microstructure and Strength Estimates by Finite-Element Analysis of the Spine, but not DXA, Reflects Vertebral Fracture Status in Men with Glucocorticoid-Induced Osteoporosis. Bone, 52(2), 568–577. https://doi.org/10.1016/j.bone.2012.10.036 ( reposiTUm)

Spiesz, E. M., Reisinger, A. G., Kaminsky, W., Roschger, P., Pahr, D. H., & Zysset, P. K. (2013). Computational and Experimental Methodology for Site-Matched Investigations of the Influence of Mineral mass Fraction and Collagen Orientation on the Axial Indentation Modulus of Lamellar Bone. Journal of the Mechanical Behavior of Biomedical Materials, 28, 195–205. https://doi.org/10.1016/j.jmbbm.2013.07.004 ( reposiTUm)

Glüer, C. C., Marin, F., Ringe, J.-D., Hawkins, F., Möricke, R., Papaioannu, N., Farahmand, P., Minisola, S., Martínez, G., Nolla, J. M., Niedhart, C., Guañabens, N., Nuti, R., Martín-Mola, E., Thomasius, F., Kapetanos, G., Peña, J. A., Graeff, C., Petto, H., … Zysset, P. K. (2013). Comparative Effects of Teriparatide and Risedronate in Glucocorticoid-Induced Osteoporosis in Men: 18-Month Results of the EuroGIOPs Trial. Journal of Bone and Mineral Research, 28(6), 1355–1368. http://hdl.handle.net/20.500.12708/154995 ( reposiTUm)

Reisinger, A. G., Pahr, D. H., & Zysset, P. K. (2011). Elastic Anisotropy of Bone Lamellae as a Function of Fibril Orientation Pattern. Biomechanics and Modeling in Mechanobiology, 10(1), 67–77. https://doi.org/10.1007/s10237-010-0218-6 ( reposiTUm)

Reisinger, A. G., Pahr, D. H., & Zysset, P. K. (2011). Principal Stiffness Orientation and Degree of Anisotropy of Human Osteons Based on Nanoindentation in Three Distinct Planes. Journal of the Mechanical Behavior of Biomedical Materials, 4(8), 2113–2127. https://doi.org/10.1016/j.jmbbm.2011.07.010 ( reposiTUm)

Reisinger, A. G., Pahr, D. H., & Zysset, P. K. (2010). Sensitivity Analysis and Parametric Study of Elastic Properties of an Unidirectional Mineralized Bone Fibril-Array Using Mean Field Methods. Biomechanics and Modeling in Mechanobiology, 9(5), 499–510. https://doi.org/10.1007/s10237-010-0190-1 ( reposiTUm)

Synek, A., Schwarz, G., Reisinger, A., Huber, S., Nürnberger, S., Hirtler, L., Hofstätter, J., & Pahr, D. (2023). Predicting femoral bone strength after cephalomedullary nail removal with FE models using pre-operative CT scans. In X International Conference on Computational Bioengineering (ICCB 2023) : Programme & Book of Abstracts (pp. 33–33). http://hdl.handle.net/20.500.12708/192206 ( reposiTUm)

Amini, M., Reisinger, A. G., & Pahr, D. (2019). Effect of Selected Scan Parameters on QCT-Based BMD Estimations of a Femur. In Book of Abstracts of the 25th Congress of the European Society of Biomechanics (p. 314). TU Verlag. http://hdl.handle.net/20.500.12708/68000 ( reposiTUm)

Karner, P., Frank, M., Andriotis, O. G., Reisinger, A. G., & Thurner, P. J. (2019). Influence of Non-Enzymatic Glycation on Tensile Mechanical Properties of Bovine Individual Trabeculae. In Book of Abstracts of the 25th Congress of the European Society of Biomechanics (p. 281). TU Verlag. http://hdl.handle.net/20.500.12708/67999 ( reposiTUm)

Frank, M., Reisinger, A. G., Pahr, D. H., & Thurner, P. J. (2019). Tensile Mechanical Properties of Human Individual Trabeculae of Non- and Osteopororotic Fracture Donors. In Book of Abstracts of the 25th Congress of the European Society of Biomechanics (p. 685). TU Verlag. http://hdl.handle.net/20.500.12708/68006 ( reposiTUm)

Reisinger, A. G., Frank, M., Thurner, P. J., & Pahr, D. (2019). Elasto-Visco-Plastic Material Parameters of Single Trabeculae Identified by Rheological Modelling. In Book of Abstracts of the 25th Congress of the European Society of Biomechanics (p. 182). TU Verlag. http://hdl.handle.net/20.500.12708/67994 ( reposiTUm)

Estermann, S.-J., Müller-Guttenbrunn, C., Pahr, D. H., & Reisinger, A. G. (2019). Macroindentation of Liver Tissue and 3D Printing Materials for Comparison of Tactile Properties. In Book of Abstracts of the 25th Congress of the European Society of Biomechanics (p. 230). TU Verlag. http://hdl.handle.net/20.500.12708/67996 ( reposiTUm)

Amraish, N., Reisinger, A. G., & Pahr, D. H. (2019). Accuracy And Precision of Full-Field Surface Strain Measurements. In Book of Abstracts of the 25th Congress of the European Society of Biomechanics (p. 223). TU Verlag. http://hdl.handle.net/20.500.12708/67995 ( reposiTUm)

Reisinger, A. G., Pahr, D. H., & Zysset, P. K. (2010). Anisotropy of Bone Lamellae. In H. Kaiser & R. Kirner (Eds.), Proceedings of the Junior Scientist Conference 2010 (pp. 155–156). http://hdl.handle.net/20.500.12708/66068 ( reposiTUm)

Reisinger, A. G., Pahr, D. H., & Zysset, P. K. (2010). The Anisotropy of Bone Lamellae as a Function of Diverse Fibril Orientation Patterns. In C. T. Lim & J. C. H. Goh (Eds.), 6th World Congress of Biomechanics (WCB 2010) (pp. 1667–1670). Springer-Verlag. http://hdl.handle.net/20.500.12708/66120 ( reposiTUm)

Cichy, E., Reisinger, A. G., Roschger, P., & Zysset, P. K. (2010). Morphology-Elasticity Relationships in Mineralized Turkey Leg Tendon. In 44. DGBMT Jahrestagung (p. 3). Biomed.Tech. http://hdl.handle.net/20.500.12708/66139 ( reposiTUm)

Suzzi, D., Hörmann, T., & Reisinger, A. (2008). Pneumatic transport of solid particles: simulation and validation in a circular pipe. In 6th International Conference on CFD in Oil & Gas, Matallurgical and Process Industries (p. 7). SINTEF Materials and Chemistry. http://hdl.handle.net/20.500.12708/65757 ( reposiTUm)

Stelzer, S., Kaudela, V., Einwögerer, T., Grebe, A., Händel, M., Pahr, D., Reisinger, A. G., Resch, M., Rohringer, H., & Teschler-Nicola, M. E. (2025, February 5). Digitising and Reconstructing the Upper Palaeolithic Infant Twin Burial from Krems-Wachtberg [Poster Presentation]. 1. Science Parade an der KL Krems, Krems, Austria. http://hdl.handle.net/20.500.12708/221213 ( reposiTUm)

Fiedler, V., Reisinger, A. G., & Pahr, D. H. (2025, February 5). Accuracy of deformation measurement via particle tracking [Conference Presentation]. 1. Science Parade - Karl Landsteiner University of Health Sciences, Krems, Austria. http://hdl.handle.net/20.500.12708/221211 ( reposiTUm)

Reisinger, A., Pichler, M., & Pahr, D. (2023, May 23). Viscoelasticity of menisci measured by relaxation [Conference Presentation]. Network meeting of the ESB Austrian Chapter 2023, Salzburg, Austria. ( reposiTUm)

Nägl Katharina, Reisinger, A. G., & Pahr, D. (2022, June). Biomechanical failure behaviour of 3D printed femoral bones compared to artificial and human bones [Conference Presentation]. ESB 2022 - 27th Congress of the European Society of Biomechanics, Porto, Portugal. http://hdl.handle.net/20.500.12708/152377 ( reposiTUm)

Reisinger, A. G., Frank, M., Thurner, P., & Pahr, D. (2022, June 28). Damage in single trabeculae under tension identified by inverse rheological modelling [Conference Presentation]. ESB 2022 - 27th Congress of the European Society of Biomechanics, Porto, Portugal. http://hdl.handle.net/20.500.12708/152390 ( reposiTUm)

Silva-Henao, J. D., Pahr, D. H., & Reisinger, A. G. (2021). Bone sample selection for screw mechanical testing based on peri-implant CT morphometry. 26th Congress of the European Society of Biomechanics - ESBiomech, Mailand, Italy. http://hdl.handle.net/20.500.12708/95571 ( reposiTUm)

Amraish, N., Reisinger, A. G., & Pahr, D. H. (2021). Measurement Of Linear Strain Fields By Means Of Digital Image Correlation. 26th Congress of the European Society of Biomechanics - ESBiomech, Mailand, Italy. http://hdl.handle.net/20.500.12708/95526 ( reposiTUm)

Estermann, S.-J., Förster-Streffleur, S., Hirtler, L., Streicher, J., Pahr, D. H., & Reisinger, A. G. (2021). Viscoelastic properties of human liver: influence of Thiel preservation and comparison with animal tissue. 26th Congress of the European Society of Biomechanics - ESBiomech, Mailand, Italy. http://hdl.handle.net/20.500.12708/95527 ( reposiTUm)

Estermann, S.-J., Müller-Guttenbrunn, C., Pahr, D., & Reisinger, A. G. (2019). Comparison of tactile properties of liver tissue and potential 3D printing materials via macroindentation. 11. Kongress der Deutschen Gesellschaft für Biomechanik (DGfB 2019), Berlin, Germany. http://hdl.handle.net/20.500.12708/95113 ( reposiTUm)

Amini, M., Reisinger, A. G., & Pahr, D. (2018). An enhanced biomechanical femoral test setup to study multiple loading configurations in stance and sideways fall orientations on the same specimen. 8th World Congress of Biomechanics, WCB 2018, Dublin, Ireland. http://hdl.handle.net/20.500.12708/94898 ( reposiTUm)

Reisinger, A. G., & Pahr, D. (2018). Visco-Plastic Mechanical Properties of Implanted Bone Screws Identified by Rheological Modeling. 8th World Congress of Biomechanics, WCB 2018, Dublin, Ireland. http://hdl.handle.net/20.500.12708/94900 ( reposiTUm)

Pahr, D. H., Amini, M., & Reisinger, A. G. (2018). Biomechanical measurement of the fracture risk of a human femur in multiple load directions based on DIC. The First International Conference on Materials, Mimicking, Manufacturing from and for Bio Application, Milan, Italy. http://hdl.handle.net/20.500.12708/94879 ( reposiTUm)

Iori, G., Reisinger, A. G., Peralta, L., Raum, K., & Pahr, D. H. (2017). Stiffness Coefficients of Compressive and Bending Nature During Quasi-Static Mechanical Tests of the Hip. 23rd Congress of the European Society of Biomechanics, Sevilla, Spain. http://hdl.handle.net/20.500.12708/94675 ( reposiTUm)

Benca, E., Reisinger, A. G., Patsch, J., Hirtler, L., Synek, A., Stenicka, S., Kainberger, F., Mayr, W., Windhager, R., & Pahr, D. (2017). Fracture Prediction in Patients with Metastatic Lesions in the Femur Using QCT-based Finite Element Analysis. 19th ISOLS General Meeting, Kanazawa, Japan. http://hdl.handle.net/20.500.12708/94854 ( reposiTUm)

Benca, E., Reisinger, A. G., Patsch, J., Hirtler, L., Synek, A., Stenicka, S., Kainberger, F., Windhager, R., Mayr, W., & Pahr, D. H. (2016). The Effect of Metastatic Lesions on the Biomechanical Behavior of the Femur. 22nd Congress of the European Society of Biomechanics (ESB 2016), Lyon, France. http://hdl.handle.net/20.500.12708/94414 ( reposiTUm)

Zysset, P. K., Reisinger, A. G., Spiesz, E., Pahr, D. H., & Schwiedrzik, J. J. (2014). Modeling Scale Transition of Anisotropic Elasticity and Damage in Lamellar Bone. 7th World Congress of Biomechanics (WCB2014), Boston, United States of America (the). http://hdl.handle.net/20.500.12708/93850 ( reposiTUm)

Farahmand, P., Marin, F., Hawkins, F., Möricke, R., Ringe, J.-D., Glüer, C. C., Papaioannu, N., Minisola, S., Martínez, G., Nolla, J. M., Niedhart, C., Guañabens, N., Nuti, R., Martín-Mola, E., Thomasius, F., Kapetanos, G., Peña, J. A., Graeff, C., Petto, H., … Zysset, P. K. (2012). Changes in Serum PINP during Teriparatide Therapy Correlate with Improvements in Vertebral Strength as Assessed by Finite Element Modeling in Men with Glucocorticoid-Induced Osteoporosis. ECTS2012, Stockholm, Sweden. http://hdl.handle.net/20.500.12708/93340 ( reposiTUm)

Glüer, C. C., Marin, F., Ringe, J.-D., Hawkins, F., Möricke, R., Papaioannu, N., Farahmand, P., Minisola, S., Martínez, G., Nolla, J. M., Niedhart, C., Guañabens, N., Nuti, R., Martín-Mola, E., Thomasius, F., Kapetanos, G., Peña, J. A., Graeff, C., Petto, H., … Zysset, P. K. (2012). Teriparatide and Risedronate in Glucocorticoid-Induced Osteoporosis in Men: 18-Month Results of the EuroGIOPS Trial. ECTS2012, Stockholm, Sweden. http://hdl.handle.net/20.500.12708/93341 ( reposiTUm)

Reisinger, A. G., Pahr, D. H., & Zysset, P. K. (2011). Micromechanics of Lamellar Bone. Dreiländertagung 2011 der ÖGMP, DGMP und SGSMP, Wien, Austria. http://hdl.handle.net/20.500.12708/93209 ( reposiTUm)

Reisinger, A. G., Pahr, D. H., & Zysset, P. K. (2009). Sensitivitätsanalyse der Steifigkeiten des unidirektionalen Fibrillenverbunds in lamellarem Knochen. Wissenschaftliche Herbsttagung 2009 der Österreichischen Gesellschaft zur Erforschung des Knochens und des Mineralstoffwechsels, Wien, Austria. http://hdl.handle.net/20.500.12708/92860 ( reposiTUm)

Reisinger, A. G., Pahr, D. H., & Zysset, P. K. (2009). Sensitivity Study of Mineralized Bone Fibril-Array Stiffness. 6. Jahrestagung der Deutschen Gesellschaft für Biomechanik, Münster, EU. http://hdl.handle.net/20.500.12708/92762 ( reposiTUm)

Reisinger, A. G. (2011). Modeling and validation of multiscale lamellar bone elasticity [Dissertation, Technische Universität Wien]. reposiTUm. http://hdl.handle.net/20.500.12708/161506 ( reposiTUm)