Wissenschaftliche Artikel

Deshpande, A., Baumann, C., Patrick Faue, Michael Mayer, Ressel, G., Friedrich Bleicher, & Frank E. Pfefferkorn. (2024). Fully Consolidated Deposits from Oxide Dispersion Strengthened and Silicon Steel Powders via Friction Surfacing. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 146(10), 1–9. https://doi.org/10.1115/1.4066040 ( reposiTUm)
Duflou, J., Wegener, K., Tekkaya, A. E., Hauschild, M. Z., Bleicher, F., Yan, J., & Hendrickx, B. (2024). Efficiently preserving material resources in manufacturing: Industrial symbiosis revisited. CIRP ANNALS-MANUFACTURING TECHNOLOGY, 73(2), 695–721. https://doi.org/10.1016/j.cirp.2024.05.006 ( reposiTUm)
Krall, S., Prießnitz, M., Baumann, C., Brandt, P., & Bleicher, F. (2023). Avoidance of Drill Cap Formation in CFRP-Titanium Stack Materials by Using Vibration Assisted Drilling with Defined Coupling of the Oscillation. Journal of Machine Engineering, 23, 5–27. https://doi.org/10.36897/jme/166274 ( reposiTUm)
Krall, S., Prießnitz, M., Baumann, C., & Bleicher, F. (2023). Non-destructive characterization of strain induced surface hardness increase by measuring magnetic properties of AISI 304. Materials & Design, 226, Article 111627. https://doi.org/10.1016/j.matdes.2023.111627 ( reposiTUm)
Diebold, J., & Bleicher, F. (2023). The influence of mill scale on horizontal bandsawing of 1.2312 steel: Wear, forces and vibrations. Materials Today: Proceedings, 93(4), 697–704. https://doi.org/10.1016/j.matpr.2023.05.369 ( reposiTUm)
Hohensulz, C., & Bleicher, F. (2023). Application scenarios of a tactile surface roughness measurement system for In Situ measurement in machine tools. Metrology, 3(3), 280–291. https://doi.org/10.3390/metrology3030016 ( reposiTUm)
Jung, R. O., Bleicher, F., Krall, S., Juricek, C., Lottes, R., Steinschütz, K., & Reininger, T. (2023). Cyber Physical Production Systems for Deep Drawing. Journal of Manufacturing Science and Engineering, 145(10), Article 101006. https://doi.org/10.1115/1.4062903 ( reposiTUm)
Agiwal, H., Baumann, C., Krall, S., Yeom, H., Sridharan, K., Bleicher, F., & Pfefferkorn, F. (2023). Towards Multilayered Coatings of 304L Stainless Steels Using Friction Surfacing. Journal of Manufacturing Science and Engineering, 145(1), Article 011001. https://doi.org/10.1115/1.4055050 ( reposiTUm)
Ramsauer, C., Leitner, D., Habersohn, C., Schmitz, T. L., Yamazaki, K., & Bleicher, F. (2023). Flexure-based dynamometer for vector-valued milling force measurement. Journal of Machine Engineering, 23. https://doi.org/10.36897/jme/161234 ( reposiTUm)
Deshpande, A., Agiwal, H., Baumann, C., Krall, S., Bleicher, F., & Pfefferkorn, F. (2023). Recycling metal cutting chips into a consolidated deposition with friction surfacing. Manufacturing Letters, 35, 743–749. https://doi.org/10.1016/j.mfglet.2023.08.093 ( reposiTUm)
Bleicher, F., Biermann, D., Drossel, W.-G., Moehring, H.-C., & Altintas, Y. (2023). Sensor and actuator integrated tooling systems. CIRP ANNALS-MANUFACTURING TECHNOLOGY, 72(2), 673–696. https://doi.org/10.1016/j.cirp.2023.05.009 ( reposiTUm)
Zhang, B., Lu, S., Rabiey, M., Axinte, D., & Bleicher, F. (2023). Grinding of composite materials. CIRP ANNALS-MANUFACTURING TECHNOLOGY, 72(2), 645–671. https://doi.org/10.1016/j.cirp.2023.05.001 ( reposiTUm)
Diebold, J., Wiesinger, G., & Bleicher, F. (2022). Horizontal bandsawing of Inconel 718: The influence of parameter variations and wear on bandsawing deviations. Materials Today: Proceedings, 62(5), 2617–2623. https://doi.org/10.1016/j.matpr.2022.04.589 ( reposiTUm)
Krall, S., Baumann, C., Agiwal, H., Bleicher, F., & Pfefferkorn, F. (2022). Investigation Of Multilayer Coating Of En Aw 6060 - T66 Using Friction Surfacing. Journal of Machine Engineering. https://doi.org/10.36897/jme/147502 ( reposiTUm)
Ramsauer, C. M., Oswald, R., Schörghofer, P., Leder Norbert, Schmitz, T. L., & Bleicher, F. (2022). Primary Testing of an Instrumented Tool Holder for Brush Deburring of Milled Workpieces. Journal of Machine Engineering, 22(2), 99–107. https://doi.org/10.36897/jme/149782 ( reposiTUm)
Lamprecht, M., Koçbay, E., Leonhartsberger, M., Vetyukov, Y., & Bleicher, F. (2021). Nonlinearmechanicalmodel of the shaft of a roll forming mill and parameter identification. The International Journal of Advanced Manufacturing Technology, 112(11–12), 3363–3375. https://doi.org/10.1007/s00170-020-06412-5 ( reposiTUm)
Brier, J., & Bleicher, F. (2021). Design of a contactless powered and piezoelectric-actuated toolfor non-resonant low-frequency vibration-assisted machiningof brittle-hard materials. The International Journal of Advanced Manufacturing Technology, 117(7–8), 2243–2253. https://doi.org/10.1007/s00170-021-07436-1 ( reposiTUm)
Bleicher, F., & Mauthner, G. (2021). Das Innovationsherz vieler Unternehmen muss begeistert schlagen. Iv - Positionen, JULI/AUGUST, 12. http://hdl.handle.net/20.500.12708/138217 ( reposiTUm)
Bleicher, F., & Hunschofsky, H. (2021). Zurück zur Natur, hinauf auf die Bäume. AUTlook, MÄRZ(3), 22–23. http://hdl.handle.net/20.500.12708/138450 ( reposiTUm)
Bleicher, F., Trautner, T., Agovic, A., & Neuhauser, T. (2021). Neue Möglichkeiten durch Automatisierung im Formenbau. KC-Aktuell, 3–2021(3), 14–15. http://hdl.handle.net/20.500.12708/138334 ( reposiTUm)
Bleicher, F., Mauthner, G., & Schaubmayr, P. (2021). Perfekt beim ersten Mal. Hi!Tech, 5. MAI, 5. http://hdl.handle.net/20.500.12708/138433 ( reposiTUm)
Bleicher, F., Baumann, C., Krall, S., Mates, S. P., & Herzig, S. (2021). Considering the influence of heating rate, complex hardening and dynamic strain aging in AISI 1045 machining: experiments and simulations. CIRP Annals - Manufacturing Technology, 70(1), 49–52. https://doi.org/10.1016/j.cirp.2021.04.083 ( reposiTUm)
Bleicher, F., Ramsauer, C. M., Oswald, R., Leder, N., & Schoerghofer, P. (2021). Method for determining edge chipping in milling based on tool holder vibration measurements. CIRP Annals - Manufacturing Technology, 69(1), 101–104. https://doi.org/10.1016/j.cirp.2020.04.100 ( reposiTUm)
Bleicher, F., Haas, F., Otto, A., & Zeman, K. (2021). Production Systems. ÖWGP - New Deal in Production, JULY(July), 18–25. http://hdl.handle.net/20.500.12708/139108 ( reposiTUm)
Bleicher, F., Ramsauer, C., Leonhartsberger, M., Lamprecht, M., Stadler, P., Strasser, D., & Wiedermann, C. (2021). Tooling systems with integrated sensors enabling data based process optimization. Journal of Machine Engineering, 21(1), 5–21. https://doi.org/10.36897/jme/134244 ( reposiTUm)
Ramsauer, C., & Bleicher, F. (2021). New method for determining single cutting edge breakage of a multi-tooth milling tool based on acceleration measurements by an instrumented tool holder. Journal of Machine Engineering, 21(1), 67–77. https://doi.org/10.36897/jme/131918 ( reposiTUm)
Bleicher, F., & Mauthner, G. (2020). Von der Arbeitsvorbereitung zur virtuellen Fertigung. AUTlook, 2020(6), 12–15. http://hdl.handle.net/20.500.12708/141894 ( reposiTUm)
Bleicher, F., & Hunschofsky, H. (2020). Patience you must learn, patience. AUTlook, JAENNER(1), 27. http://hdl.handle.net/20.500.12708/141888 ( reposiTUm)
Wiesauer, M., Habersohn, C., & Bleicher, F. (2020). Validation of a Coupled Simulation for Machine Tool Dynamics Using a Linear Drive Actuator. Journal of Manufacturing and Materials Processing, 5(1), 1–17. https://doi.org/10.3390/jmmp5010001 ( reposiTUm)
Reiter, M., & Bleicher, F. (2019). Affectation of chip formation in single-lip deep hole drilling at small diameters by application of low-frequency vibration support. MM Science Journal, 2019(04), 3107–3113. https://doi.org/10.17973/mmsj.2019_11_2019058 ( reposiTUm)
Ketterer, J., & Bleicher, F. (2019). Zerspaner werden digital - wenn es sich rechnet. MM Maschinen Markt, 1(1), 42–45. http://hdl.handle.net/20.500.12708/143861 ( reposiTUm)
Bleicher, F., Reichl, C., Linhardt, F., Wimberger, P., Habersohn, C., & Krall, S. (2019). Investigation of Noise Transmission of a Machine Tool Enclosure. Journal of Machine Engineering, 19(3), 5–16. https://doi.org/10.5604/01.3001.0013.4076 ( reposiTUm)
Bleicher, F., Wiesinger, G., Kumpf, C., Finkeldei, D., Baumann, C., & Lechner, C. (2018). Vibration assisted drilling of CFRP/metal stacks at low frequencies and high amplitudes. Production Engineering : Research and Development. https://doi.org/10.1007/s11740-018-0818-z ( reposiTUm)
Schörghofer, P., Leder, N., Bleicher, F., Möhring, H. C., & Sachs, G. (2018). Werkzeug “Mit Gefühl.” Im Mittelpunkt, X. http://hdl.handle.net/20.500.12708/144653 ( reposiTUm)
Bleicher, F., Schörghofer, P., & Habersohn, C. (2018). In-Process Control With A Sensory Tool Holder To Avoid Chatter. Journal of Machine Engineering, 18(3), 16–27. https://doi.org/10.5604/01.3001.0012.4604 ( reposiTUm)
Akhavei, F., Bleicher, F., & Pöchgraber, G. (2017). Hälfte der österreichischen Unternehmen fehlt digitaler Masterplan. CASH, 23. MAI 2017(economie). http://hdl.handle.net/20.500.12708/146564 ( reposiTUm)
Akhavei, F., Bleicher, F., & Pöchgraber, G. (2017). Chefsache Industrie 4.0: Jedem zweiten Unternehmen fehlt Digitalisierungsstrategie. Wirtschaftszeit, 22. MAI 2017. http://hdl.handle.net/20.500.12708/146561 ( reposiTUm)
Steiner, F., & Bleicher, F. (2016). Freiformen im sphärischenn Biegekopf - Ein thermoplastisches Umformverfahren erweitert die Designfreiheit um ein Vielfaches. Kunststoffe, 106. JAHRGANG(1), 56–59. http://hdl.handle.net/20.500.12708/148769 ( reposiTUm)
Hacksteiner, M., Dür, F., Losert, B., & Bleicher, F. (2016). Der Gesetzgeber weist den Weg. Produktiver Durch Energie-Effizienz - 5 Clusterprojekte Zeigen Den Weg, 1, 3–5. http://hdl.handle.net/20.500.12708/149089 ( reposiTUm)
Bleicher, F. (2016). Wie viel ist Innovation Wert? Industriemagazin Verlag GmbH - Factory, 1(10), 6–9. http://hdl.handle.net/20.500.12708/149478 ( reposiTUm)
Ripoll, M. R., Heindl, F., Lechner, C., Totolin, V., Jech, M., & Bleicher, F. (2016). Enhanced Sliding Wear Resistance of Technical Alloys by Hard Particle Reinforcement Using Machine Hammer Peening. Tribology Transactions, MAY. http://hdl.handle.net/20.500.12708/149412 ( reposiTUm)
Krenn, C., Weichbold, T., Korp, G., Meixner, E., Stockner, H., Berger, D., Bernreiter, J., Bleicher, F., Geiger, G., & Fresner, J. (2015). Qualitative and quantitative modelling to build a conceptual framework to identify energy saving options: case study of a wire producing. Journal of Cleaner Production, 95, 212–222. https://doi.org/10.1016/j.jclepro.2015.02.052 ( reposiTUm)
Bleicher, F. (2015). Industry 4.0: A Vision Affects Manufacturing in Austria. Bridges-Magazine, 42. http://hdl.handle.net/20.500.12708/150724 ( reposiTUm)
Biermann, D., Rautert, C., Bathe, T., Bleicher, F., Zemann, R., & Sacherl, J. (2014). Verfahrensvergleich bei der Bearbeitung von Faser-Kunststoff-Verbunden. VDI-Z, II, 22–24. http://hdl.handle.net/20.500.12708/158011 ( reposiTUm)
Bleicher, F. (2014). The human factor. Hoerbiger@motion, FEATURE: INDUSTRY 4.0-NOVEMBER 2014, 16–19. http://hdl.handle.net/20.500.12708/157945 ( reposiTUm)
Bleicher, F., Duer, F., Leobner, I., Kovacic, I., Heinzl, B., & Kastner, W. (2014). Co-simulation environment for optimizing energy efficiency in production systems. CIRP Annals - Manufacturing Technology, 63(1), 441–444. https://doi.org/10.1016/j.cirp.2014.03.122 ( reposiTUm)
Rodríguez Ripoll, M., Heindl, F., Lechner, C., Habersohn, C., Jech, M., & Bleicher, F. (2014). Improving the wear resistance of functional surfaces using the machine hammer peening technique. Tribology: Materials, Surfaces & Interfaces, 8(1), 21–26. https://doi.org/10.1179/1751584x14y.0000000063 ( reposiTUm)
Kovacic, I., Orehounig, K., Mahdavi, A., Bleicher, F., Dimitrou, A., & Waltenberger, L. (2013). Energy Efficient Production - Interdisciplinary, Systemic Approach through Integrated Simulation. Strojarstvo, 55(1), 18–34. http://hdl.handle.net/20.500.12708/155723 ( reposiTUm)
Stehle, D., Schmid, A., Oechsner, M., Bleicher, F., & Flatz, T. (2013). Strukturieren von Stahlproben zur Steigerung der Haftfestigkeit einer thermisch gespritzten Kupferbasislegierung zur Untersuchung der Einsatzpotenziale an lagerschalenlosen Pleuelstangen. Thermal Spray Bulletin, 2, 110–116. http://hdl.handle.net/20.500.12708/155205 ( reposiTUm)
Hui, Y., Felber, S., & Bleicher, F. (2013). Chipping mechanism and material removal rate of diamond and core drilling. Diamond & Abrasives Engineering, 4, 1–6. http://hdl.handle.net/20.500.12708/155076 ( reposiTUm)
Rao, R. V., Singh, D., Bleicher, F., & Dorn, C. (2012). Weighted Euclidean distance-based approach as a multiple attribute decision making method for manufacturing situations. International Journal of Multicriteria Decision Making, INTERNATIONAL JOURNAL OF MULTICRITERIA DECISION MAKING(3), 225–240. http://hdl.handle.net/20.500.12708/164571 ( reposiTUm)
Zemann, R., Bleicher, F., & Zisser-Pfeifer, R. (2012). Praxiserfahrungen mit der Technologie der elektrochemischen Mikrobearbeitung mit ultrakurzen Pulsen. Galvanotechnik, 103(4), 722–725. http://hdl.handle.net/20.500.12708/164110 ( reposiTUm)
Puschitz, F., & Bleicher, F. (2011). Maschinenabnahme einer Anlage zum elektrochemischen Fräsen mit Hilfe Nexiv VMR 3020. Industrial Quality, 01, 28–29. http://hdl.handle.net/20.500.12708/161838 ( reposiTUm)
Pohselt, D., Dorn, C., Kovacic, I., Achammer, C., & Bleicher, F. (2010). Genen den Strom. Industriemagazin, 04/10(4), 44–47. http://hdl.handle.net/20.500.12708/167330 ( reposiTUm)
Dorn, C., Kovacic, I., Bleicher, F., Achammer, C., & Honsig, M. (2010). Energie sparen im großen Stil. Hi!Tech, 3/2010, 52–53. http://hdl.handle.net/20.500.12708/167208 ( reposiTUm)
Bleicher, F., Renger, U., & Lang, H. (2010). Lastkollektiverfassung als Voraussetzung für TCO-Modelle. ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb, 105, 277–281. http://hdl.handle.net/20.500.12708/166908 ( reposiTUm)
Puschitz, F., & Bleicher, F. (2009). Bestimmung des Bearbeitungsgrats. Quality Engineering, 05, 22. http://hdl.handle.net/20.500.12708/165602 ( reposiTUm)
Puschitz, F., & Bleicher, F. (2009). Auf der Pole-Position. Inspect, 06, 42–43. http://hdl.handle.net/20.500.12708/165601 ( reposiTUm)
Puschitz, F., Bleicher, F., & Mikats, T. (2009). CNC-Lösung Made by B&R. Automotion, 11, 54–57. http://hdl.handle.net/20.500.12708/166124 ( reposiTUm)
Puschitz, F., & Bleicher, F. (2008). Mit Linse und Laser. Quality Engineering, 7–8, 72–73. http://hdl.handle.net/20.500.12708/170430 ( reposiTUm)
Bleicher, F., Puschitz, F., Dorn, C., & Caudr, H. (2006). Kleben für Fortgeschrittene. MegaTech Das Österreichische Technikmagazin, 12(12), 20–21. http://hdl.handle.net/20.500.12708/174137 ( reposiTUm)
Bleicher, F., Puschitz, F., & Dorn, C. (2006). Wer kann, der CAM! MegaTech Das Österreichische Technikmagazin, 12, 30–37. http://hdl.handle.net/20.500.12708/174138 ( reposiTUm)

Beiträge in Tagungsbänden

Mauthner, G., Stautner, M., Sell, S., Frings, M., Lorenz, A., Plakhotnik, D., & Bleicher, F. (2025). Wire-Arc Additive Manufacturing Toolpath Optimization Using a Dexel-Based Temperature Prediction Model. In H. Kohl, G. Seliger, F. Dietrich, & S. Mur (Eds.), Sustainable Manufacturing as a Driver for Growth (pp. 730–737). Springer. https://doi.org/10.1007/978-3-031-77429-4_81 ( reposiTUm)
Ottitsch, J. M., Gassner, A., Thin, M., Wiesinger, G., Einspieler, C., & Bleicher, F. (2024). Investigation of Different Mechanical Methods for Photovoltaic Module Recycling. In Tagungsband 13. WISSENSCHAFTSKONGRESS Kreislauf- und Ressourcenwirtschaft (pp. 45–50). innsbruck university press. ( reposiTUm)
Singer, F., Scherfler, R., Donabaum, J., Pickel, L., Trautner, T., & Bleicher, F. (2024). A Study on Industrial Tool Wear: Assessing the Potential for Optimised Lifespan Utilisation of Indexable Inserts Through Automated Wear Detection. In F. Bleicher, O. Bodur, & T. F. Trautner (Eds.), Twin Transition in Manufacturing : Wiener Produktionstechnik Kongress 2024 (pp. 15–21). TU Wien, Institut für Fertigungstechnik und Photonische Technologien. https://doi.org/10.5281/zenodo.13885833 ( reposiTUm)
Gassner, A., Özkalay, E., Eder, G. C., Friesen, G., Feichtner, M., Caccivio, M., & Bleicher, F. (2024). Accelerate Product Development for PV in Alpine Installations. In 41st European Photovoltaic Solar Energy Conference and Exhibition : Proceedings of the International Conference. 41st European Photovoltaic Solar Energy Conference and Exhibition (EU PVSEC 2024), Wien, Austria. WIP Renewable Energies. http://hdl.handle.net/20.500.12708/210284 ( reposiTUm)
Tonejca, L., Trautner, T., Slimane, E., Peso, N., Zulehner, J., & Bleicher, F. (2024). Automated Design of Experiments supporting Feature-based Optimisation of Manufacturing Processes. In Procedia CIRP (pp. 1611–1616). https://doi.org/10.1016/j.procir.2024.10.290 ( reposiTUm)
Krall, S., Caudr, H., Prießnitz, M., Maier, S., Baumann, C., & Bleicher, F. (2024). Reluctance Based Actuator for Discrete Machine Hammer Peening. In Procedia CIRP (pp. 517–522). https://doi.org/10.1016/j.procir.2024.05.090 ( reposiTUm)
Wallner, B., Zwölfer, B., Trautner, T., & Bleicher, F. (2024). Digital Twin Development and Operation of a Flexible Manufacturing Cell using ISO 23247. In K. Mpofu, N. Sacks, & O. Damm (Eds.), 56th CIRP International Conference on Manufacturing Systems 2023 (pp. 1149–1154). Elsevier. https://doi.org/10.1016/j.procir.2023.09.140 ( reposiTUm)
Tonejca, L., Mayer, C., Trautner, T. F., Mauthner, G., & Bleicher, F. (2024). CNC Machine Tool Focused Edge Computing in Manufacturing. In 17th CIRP Conference on Intelligent Computation in Manufacturing Engineering (CIRP ICME ‘23) (pp. 111–116). Elsevier. https://doi.org/10.1016/j.procir.2024.08.309 ( reposiTUm)
Jung, R. O., Seper, C., Juricek, C., & Bleicher, F. (2024). Sensor integration for process control in deep drawing. In Material Forming (pp. 1399–1407). https://doi.org/10.21741/9781644903131-155 ( reposiTUm)
Trautner, T. F., Gerstbauer, R., Harutyunyan, L., Loidolt, N., Dumss, S., & Bleicher, F. (2024). An Auditable PPR Framework for the Digital Product Passport using AAS-based Process Passports. In F. Bleicher, O. Bodur, & T. F. Trautner (Eds.), Twin Transition in Manufacturing : Wiener Produktionstechnik Kongress 2024 (pp. 68–73). TU Wien, Institut für Fertigungstechnik und Photonische Technologien. https://doi.org/10.5281/zenodo.13886349 ( reposiTUm)
Pöchgraber, G., Bougain, S., Trautner, T., Jeepjua, N., Bohaty, G., & Bleicher, F. (2023). Design of a Multi-Fidelity Methodology for logistics process planning and Digital Twin integration in the early phases of product development. In R. Teti & D. D’Addona (Eds.), 16th CIRP Conference on Intelligent Computation in Manufacturing Engineering (pp. 86–91). Elsevier. https://doi.org/10.1016/j.procir.2023.06.016 ( reposiTUm)
Wallner, B., Trautner, T., & Bleicher, F. (2023). Functionality test methodology for virtual commissioning of reconfigurable manufacturing systems. In R. Teti & D. M. D’Addona (Eds.), 16th CIRP Conference on Intelligent Computation in Manufacturing Engineering (pp. 56–61). Elsevier. https://doi.org/10.1016/j.procir.2023.06.011 ( reposiTUm)
Schwaiger, C., Trautner, T. F., & Bleicher, F. (2023). Load Profile Optimization Using Electricity Wholesale Market Price Data for Discrete Manufacturing. In H. Kohl, G. Seliger, & F. Dietrich (Eds.), Manufacturing Driving Circular Economy: Proceedings of the 18th Global Conference on Sustainable Manufacturing, October 5-7, 2022, Berlin (pp. 508–516). Springer. https://doi.org/10.1007/978-3-031-28839-5_57 ( reposiTUm)
Mauthner, G., Hoffmann, M., Plessing, L., Trautner, T., & Bleicher, F. (2023). Industry-Oriented System Architecture for Feature-Based Data Management in CNC Machining Processes. In R. Teti & D. M. D’Addona (Eds.), 16th CIRP Conference on Intelligent Computation in Manufacturing Engineering (pp. 157–162). Elsevier. https://doi.org/10.1016/j.procir.2023.06.028 ( reposiTUm)
Bodur, O., Walcher, E. M., Sterca, A., Sulz, C., Calin, R.-A., Durakbasa, N. M., & Bleicher, F. (2023). Porosity Examination of Additive Manufactured Parts and Effects of Infill Parameters. In R. Teti & D. M. D’Addona (Eds.), 16th CIRP Conference on Intelligent Computation in Manufacturing Engineering (pp. 643–648). Elsevier. https://doi.org/10.1016/j.procir.2023.06.110 ( reposiTUm)
Bodur, O., Walcher, E. M., Brier, J., Krall, S., Bleicher, F., Sterca, A., Sauprigl, J., & Peherstorfer, H. (2023). Quality Assurance of Composite Grinding. In R. Teti & D. M. D’Addona (Eds.), 16th CIRP Conference on Intelligent Computation in Manufacturing Engineering (pp. 590–595). Elsevier. https://doi.org/10.1016/j.procir.2023.06.101 ( reposiTUm)
Baumann, C., Mates, S. P., Krall, S., & Bleicher, F. (2023). Introduction of a constitutive material model considering variable carbon content for cutting simulation. In V. Schulze & D. Biermann (Eds.), 19th CIRP Conference on Modeling of Machining Operations (pp. 305–310). Elsevier. https://doi.org/10.1016/j.procir.2023.03.052 ( reposiTUm)
Schwaiger, C., Trautner, T., & Bleicher, F. (2023). Energy-Cost-Optimized Strategies for Discrete Mechanical Manufacturing. In 16th CIRP Conference on Intelligent Computation in Manufacturing Engineering (pp. 1022–1027). Elsevier. https://doi.org/10.1016/j.procir.2023.06.175 ( reposiTUm)
Pöchgraber, G., Bougain, S., Trautner, T., Jeepjua, N., & Bleicher, F. (2023). Digital Twin Preparation for the Prototyping Phase, a Use Case. In F. G. Galizia & M. Bortolini (Eds.), Production Processes and Product Evolution in the Age of Disruption. Proceedings of the 9th Changeable, Agile, Reconfigurable and Virtual Production Conference (CARV2023) and the 11th World Mass Customization & Personalization Conference (MCPC2023), Bologna, Italy, June 2023 (pp. 735–742). Springer. https://doi.org/10.34726/5490 ( reposiTUm)
Ottitsch, J. M., Thin, M., Wiesinger, G., & Bleicher, F. (2023). Optimization of Mill Cutting Parameters for the Two-Step Milling Process in Photovoltaic Module Recycling. In 39th Danubia-Adria Symposium on Advances in Experimental Mechanics : Book of Abstracts (pp. 76–77). http://hdl.handle.net/20.500.12708/189810 ( reposiTUm)
Gent, S., Gent Orskar, Schörghofer, P., Ramsauer, C. M., Bleicher, F., Leder Norbert, Fernández Gutiérrez, R., & Reiterer, F. (2022). Maintenance interval monitoring and cutting edge breakout detection using an instrumented tool. In Proceedings 2022 IEEE 27th International Conference on Emerging Technologies and Factory Automation (ETFA). 2022 IEEE 27th International Conference on Emerging Technologies and Factory Automation (ETFA), Stuttgart, Germany. IEEE. ( reposiTUm)
Diebold, J., Wiesinger, G., & Bleicher, F. (2022). CUTTING THROUGH MILL SCALE OF 1.2312 STEEL: INVESTIGATION OF PARAMETER INFLUENCE FOR HORIZONTAL BANDSAWING. In Proceedings of 38th Danubia Adria Symposium (DAS 2022). 38th Danubia Adria Symposium, Poros, Greece. ( reposiTUm)
Bleicher, F. (2022). Smart and Networked Manufacturing. In F. Bleicher (Ed.), Smart and Networked Manufacturing - Wiener Produktionstechnik Kongress 2022 (pp. 7–7). new academic press og. ( reposiTUm)
Sulz, C., Hoffer, F., Wallner, B., Homayouni, S., Rehak, J., Trautner, T., & Bleicher, F. (2022). Integration of a smart 5G clamping pallet in a learning factory environment. In Proceedings of the 12th Conference on Learning Factories (CLF 2022). 12th Conference on Learning Factories (CLF), Singapore, Singapore. Singapore Institute of Manufacturing Technology (SIMTech). https://doi.org/10.2139/ssrn.4071771 ( reposiTUm)
Mauthner, G., Votruba, W., Ramsauer, C. M., Plessing, L., Trautner, T. F., & Bleicher, F. (2022). Development of a CAM-in-the-Loop System for Cutting Parameter Optimization using an Instrumented Tool Holder. In E. Carpanzano, C. Boër, & A. Valente (Eds.), Leading manufacturing systems transformation – Proceedings of the 55th CIRP Conference on Manufacturing Systems 2022 (pp. 326–331). https://doi.org/10.1016/j.procir.2022.04.053 ( reposiTUm)
Wiesinger, G., Famler, S., Weber, L., Diebold, J., & Bleicher, F. (2022). INFLUENCE OF BLADE TYPE AND CUTTING PARAMETERS ON KERF WIDTH IN HORIZONTAL BANDSAWING OF 42CrMo4. In Conference Proceedings 38th Danubia-Adria Symposium on Advances in Experimental Mechanics (DAS 2022). 38th Danubia Adria Symposium, Poros, Greece. http://hdl.handle.net/20.500.12708/139413 ( reposiTUm)
Agovic, A., Trautner, T., & Bleicher, F. (2022). Digital Transformation - Implementation of Drawingless Manufacturing: A Case Study. In Procedia CIRP (pp. 1479–1484). Elsevier. https://doi.org/10.1016/j.procir.2022.05.178 ( reposiTUm)
Pfefferkorn, F., Agiwal, H., Krall, S., Baumann, C., & Bleicher, F. (2022). Solid-State Metal Additive Manufacturing. In F. Bleicher (Ed.), Smart and Networked Manufacturing - Wiener Produktionstechnik Kongress 2022 (pp. 118–121). new academic press og. http://hdl.handle.net/20.500.12708/139623 ( reposiTUm)
Mauthner, G., Brier, J., Gommel Daniel, Wallner, B. J., Gelenne Philippe, Aabloo, A., Trautner, T. F., & Bleicher, F. (2022). Hybrid Training on Modelling and Simulation for Additive Manufacturing Using Online-Learning-Nuggets. In E. Elsevier (Ed.), 12th Conference on Learning Factories (CLF 2022). http://hdl.handle.net/20.500.12708/136388 ( reposiTUm)
Diebold, J., Wiesinger, G., & Bleicher, F. (2021). Cutting Deviations In Bandsawing Of Cylindrical Metal Parts. In Book of Abstracts (pp. 186–187). http://hdl.handle.net/20.500.12708/68220 ( reposiTUm)
Wiesauer, M., & Bleicher, F. (2021). Parameterization method for non-linear friction models of machine tool feed drives. In Procedia CIRP (pp. 399–404). https://doi.org/10.1016/j.procir.2021.09.068 ( reposiTUm)
Mauthner, G., Ehrendorfer, M., Trautner, T. F., Ramsauer, C. M., Plakhotnik, D., & Bleicher, F. (2021). Method for Data-Driven NC-Code Optimization based on Dexel Material Removal Simulation and Tool Holder Vibration Measurements. In D. Mourtzis (Ed.), 54th CIRP CMS 2021 - Towards Digitalized Manufacturing 4.0 (pp. 1131–1136). Elsevier B.V. https://doi.org/10.1016/j.procir.2021.11.190 ( reposiTUm)
Sulz, C., Brier, J., Agovic, A., & Bleicher, F. (2020). Investigation of the thermal compensation behaviour of zero-point clamping systems. In Procedia CIRP (pp. 69–74). Elsevier. https://doi.org/10.1016/j.procir.2021.03.030 ( reposiTUm)
Stoop, F., Mayr, J., Sulz, C., Bleicher, F., & Wegener, K. (2020). Fleet learning of thermal error compensation in machine tools. In Procedia CIRP. 2021 26th IEE IES International Conference on Emerging Technologies and Factory Automation, Vienna, Austria, Austria. IEEE. http://hdl.handle.net/20.500.12708/68160 ( reposiTUm)
Leonhartsberger, M., Lamprecht, M., & Bleicher, F. (2020). Influence Parameters On Tool Deflections In Roll Forming. In DAAAM Proceedings (pp. 0701–0707). http://hdl.handle.net/20.500.12708/68206 ( reposiTUm)
Bleicher, F., Ramsauer, C. M., Oswald, R., Wiesauer, M., Krall, S., Baumann, C., & Yamazaki, K. (2020). Machine diagnostics by means of a low-cost sensor integrated into the tooling system. In The Proceedings of MTTRF 2020 Meetings (pp. 45–54). http://hdl.handle.net/20.500.12708/68271 ( reposiTUm)
Bleicher, F., Brier, J., Baumann, C., Krall, S., Sacherl, J., & Yamazaki, K. (2020). Design concept of a long-stroke vibration-assisted actuator. In The Proceedings of MTTRF 2020 Meetings (pp. 131–136). http://hdl.handle.net/20.500.12708/68272 ( reposiTUm)
Finkeldei, D., Sexauer, M., & Bleicher, F. (2019). End milling of Inconel 718 using solid Si3N4 ceramic cutting tools. In Procedia CIRP (pp. 1131–1135). Elsevier. http://hdl.handle.net/20.500.12708/67979 ( reposiTUm)
Bleicher, F., Reiter, M., & Brier, J. (2019). Increase of chip removal rate in single-lip deep hole drilling at small diameters by low-frequency vibration support. In CIRP Annals - Manufacturing Technology (pp. 93–96). Elsevier. http://hdl.handle.net/20.500.12708/68049 ( reposiTUm)
Stadler, M., Pelzmann, P., & Bleicher, F. (2019). Design And Implementation Of An Inexpensive, High Resolution Displacement And Velocity Sensor. In Danubia Adria Symposium (pp. 53–54). http://hdl.handle.net/20.500.12708/68039 ( reposiTUm)
Bleicher, F., Krall, S., Brier, J., & Diebold, J. (2019). Application of low and high frequency vibration in grinding and surface structuring. In MTTRF 2019. Mttrf/iam-Cnc Annual Meeting 2019, San Francisco, United States of America (the). http://hdl.handle.net/20.500.12708/68080 ( reposiTUm)
Bleicher, F., Schörghofer, P., Leder, N., Ramsauer, C. M., Oswald, R., & Krall, S. (2019). Cognitive machining by sensor integration in tooling systems. In MTTRF 2019. Mttrf/iam-Cnc Annual Meeting 2019, San Francisco, United States of America (the). http://hdl.handle.net/20.500.12708/68079 ( reposiTUm)
Bleicher, F., & Trappl, M. (2019). Machining of Curved Holes by Actuated EDM Tool Head with Integrated Sensors for In-process Control. In CIRP Annals - Manufacturing Technology. CIRP General Assembly 2019, Birmingham, United Kingdom of Great Britain and Northern Ireland (the). http://hdl.handle.net/20.500.12708/68084 ( reposiTUm)
Finkeldei, D., Brier, J., & Bleicher, F. (2018). Investigation of tool geometry and cutting speed in machining of difficult to cut materials. In F. Bleicher (Ed.), Efficiency, Flexibility, Integration (pp. 131–140). http://hdl.handle.net/20.500.12708/67912 ( reposiTUm)
Mörzinger, B., Loschan, C., Kloibhofer, F., & Bleicher, F. (2018). A modular, holistic optimization approach for industrial appliances. In Procedia CIRP (pp. 551–556). Elsevier. http://hdl.handle.net/20.500.12708/67880 ( reposiTUm)
Klingenbrunner, M., Platzer, J., & Bleicher, F. (2018). Determining thr emissivity factor of thermoplastic materials for a thermoplastic bending process. In The Romanian Association for Stress Analysis and Materials Testing - ARTENS. 35th Danubia-Adria Symposium on Advances in Experimental Mechanics, Sinaia, Romania. http://hdl.handle.net/20.500.12708/67843 ( reposiTUm)
Raschendorfer, A., Mörzinger, B., Steinberger, E., Pelzmann, P., Oswald, R., Stadler, M., & Bleicher, F. (2018). On IOTA as a potential enabler for an M2M economy in manufacturing. In Procedia CIRP. 12th CIRP Conference on Intelligent Computation in Manufacturing Engineering, Neapel, Italy. Elsevier. http://hdl.handle.net/20.500.12708/67917 ( reposiTUm)
Hacksteiner, M., Fuchs, G., & Bleicher, F. (2018). Strategic Energy Management In Mechanical Series Production. In Procedia Manufacturing. 16th Global Conference on Sustainable Manufacturing to be held, Lexington, United States of America (the). Elsevier. http://hdl.handle.net/20.500.12708/67885 ( reposiTUm)
Bleicher, F., Reiter, M., & Brier, J. (2018). Machining of iron-carbon alloys by the use of poly-crystalline diamond cutting inserts with internal cooling. In MTTRF Annual Meeting 2018. MTTRF 2018, San Francisco, United States of America (the). http://hdl.handle.net/20.500.12708/67852 ( reposiTUm)
Biermann, D., Bleicher, F., Heisel, U., Klocke, F., Möhring, H. C., & Shih, A. (2018). Deep Hole Drilling. In CIRP Annals Manufacturing Technology. 68th CIRP General Assembly, Tokyo, Japan. Elsevier. http://hdl.handle.net/20.500.12708/67879 ( reposiTUm)
Bleicher, F., & Reiter, M. (2018). Wear reduction on cutting inserts by additional internal cooling of the cutting edge. In Procedia Manufacturing (pp. 518–524). Elsevier. http://hdl.handle.net/20.500.12708/67719 ( reposiTUm)
Bleicher, F., Steininger, A., & Finkeldei, D. (2018). Determination of coefficients of friction using an inverse pin-on-disc-test setup implemented on a machining center. In MTTRF Annual Meeting 2018. MTTRF 2018, San Francisco, United States of America (the). http://hdl.handle.net/20.500.12708/67913 ( reposiTUm)
Krall, S., Reiter, M., & Bleicher, F. (2017). Influence of the machine hammer peening technology on the surface near material structure of stainless steel X5CrNi18-10. In Materialstoday Proceedings (pp. 26603–26608). Elsevier. http://hdl.handle.net/20.500.12708/176328 ( reposiTUm)
Krall, S., Reiter, M., & Bleicher, F. (2017). Influence Of Mhp-Technology On The Surface Near Material Structure Of Stainless Steel 1.4301. In DAS2017. 34th Danubia-Adria Symposium on Advances in Experimental Mechanics, Triest, Italy. http://hdl.handle.net/20.500.12708/67654 ( reposiTUm)
Nirtl, M., Hauck, J., & Bleicher, F. (2017). Motion Deviations of a Rotational Positioning Table induced by Thermal Effects. In DAS2017. 34th Danubia-Adria Symposium on Advances in Experimental Mechanics, Triest, Italy. http://hdl.handle.net/20.500.12708/67653 ( reposiTUm)
Ayatollahi, I., Brier, J., Mörzinger, B., Heger, M., & Bleicher, F. (2017). SOA on smart manufacturing utilities for identification, data access and control. In Cirp Icme 17. 11th CIRP Conference on Intelligent Computation in Manufacturing Engineering - CIRP ICME ’17, Iscia, Italy. http://hdl.handle.net/20.500.12708/67661 ( reposiTUm)
Wegener, K., Bleicher, F., Krajnik, P., Hoffmeister, H.-W., & Brecher, C. (2017). Recent Developments in Grinding Machines. In Cirp Annals 2017 (pp. 778–802). Elsevier. http://hdl.handle.net/20.500.12708/67769 ( reposiTUm)
Bleicher, F. (2017). Hybrid Machining. In Proceedings of the CIM 2017. 16th International Scientific Conference on Production Engineering, Zadar, Croatia. http://hdl.handle.net/20.500.12708/67774 ( reposiTUm)
Schörghofer, P., Bleicher, F., Weiler, T., & Habersohn, C. (2017). Chatter Detection and Avoidance using a Sensory Tool Holder. In DAS2017. 34th Danubia-Adria Symposium on Advances in Experimental Mechanics, Triest, Italy. http://hdl.handle.net/20.500.12708/67670 ( reposiTUm)
Einspieler, C., & Bleicher, F. (2017). Unsicherheitsbeiträge zur Signalerfassung der Prozess-Verschleissbestimmung beim Tiefbohren. In VDI-Bericht 2319 (pp. 181–196). http://hdl.handle.net/20.500.12708/67740 ( reposiTUm)
Gössinger, S., Unterberger, P., & Bleicher, F. (2017). High Performance Flywheel Technology for Electric Energy Storage using Magnetic Bearings. In DAS2017. 34th Danubia-Adria Symposium on Advances in Experimental Mechanics, Triest, Italy. http://hdl.handle.net/20.500.12708/67655 ( reposiTUm)
Bleicher, F., & Steininger, A. (2017). Investigation of the Dynamic Behavior in Drilling with Indexable Insert Drills and Influence of the Contact Energy on Surface Modification by MHP. In Machine Tool Technologies Research Foundation Annual Meeting 2017. MTTRF 2017, San Francisco, United States of America (the). http://hdl.handle.net/20.500.12708/67686 ( reposiTUm)
Bleicher, F., Brier, J., Krall, S., Nikolaev, D., Reiter, M., & Steininger, A. (2017). Investigation of the Dynamic Behavior in Drilling with Indexable Insert Drills and Influence of the Contact Energy on Surface Modification by Machine Hammer Peening. In MTTRF Annual Meeting 2017. MTTRF 2017, San Francisco, United States of America (the). http://hdl.handle.net/20.500.12708/67687 ( reposiTUm)
Reiter, M., Krall, S., & Bleicher, F. (2017). Mechanical functionalisation of cutting inserts by machine hammer peening. In Proceedings of the 28th DAAAM International Symposium (2017) (pp. 767–772). Procedia Engineering. http://hdl.handle.net/20.500.12708/67721 ( reposiTUm)
Hacksteiner, M., Peherstorfer, H. M., & Bleicher, F. (2017). Energy efficiency of state-of-the-art grinding processes. In Cirp Gcsm 17. 15th Global Conference on Sustainable Manufacturing, Haifa, Israel. Elsevier. http://hdl.handle.net/20.500.12708/67739 ( reposiTUm)
Akhavei, F., Bleicher, F., & Khallaghi, A. (2016). An Approach for Optimizing the Preparation and Production Planning Process in Single Item Production. In Procedia CIRP 52 (2016) (pp. 96–101). ELSEVIER. http://hdl.handle.net/20.500.12708/67445 ( reposiTUm)
Akhavei, F., Khallaghi, A., & Bleicher, F. (2016). Development of a knowledge-based predictive model to estimate the welding process time in single part production systems. In Procedia CIRP 55 (2016) (pp. 212–217). http://hdl.handle.net/20.500.12708/67446 ( reposiTUm)
Akhavei, F., & Bleicher, F. (2016). Predictive Modeling to Increase the Reliability of Production Planning in Single-item Production. In Proceedings of the World Congress on Engineering and Computer Science 2016 Vol II WCECS 2016, October 19-21, 2016 (pp. 806–811). IAENG. http://hdl.handle.net/20.500.12708/67447 ( reposiTUm)
Bleicher, F., Pollak, C., Brier, J., & Siller, A. (2016). Reduction of built-up edge formation in machining Al- and cast iron hybrid components by internal cooling of cutting inserts. In CIRP ANNALS 2016 Manufacturing Technology (pp. 97–98). CIRP. http://hdl.handle.net/20.500.12708/67437 ( reposiTUm)
Finkeldei, D., & Bleicher, F. (2016). Investigation Of Coolants In Machining Of Titanium Aluminides. In B. Katalinic (Ed.), 26th Daaam International Symposium On Intelligent Manufacturing And Automation (pp. 825–833). http://hdl.handle.net/20.500.12708/67461 ( reposiTUm)
Mörzinger, B., Obermair, M., Leobner, I., Smolek, P., Heinzl, B., Wittmann, A., & Bleicher, F. (2016). Data-Based Modelling, Simulation And Optimization Of The Operation Of Production Plants. In H. Krebs (Ed.), VSS (pp. 86–87). http://hdl.handle.net/20.500.12708/67453 ( reposiTUm)
Hacksteiner, M., Dür, F., Finkeldei, D., Obermair, M., & Bleicher, F. (2016). Monitoring of process power and energy during machining. In Thirteenth International Conference on HIGH SPEED MACHINING 2016. 13th International Conference on High Speed Machining - Progress in Productivity and Quality, Metz, EU. http://hdl.handle.net/20.500.12708/67452 ( reposiTUm)
Bleicher, F., Brier, J., & Siller, A. (2016). Simultaneous machining of a material combination with an internally and externally cooled cutting insert. In Procedia CIRP 46 (2016) (pp. 15–18). ELSEVIER. http://hdl.handle.net/20.500.12708/67451 ( reposiTUm)
Lienert, F., Gerstenmayer, M., Krall, S., Lechner, C., Trauth, D., Bleicher, F., & Schulze, V. (2016). Experimental Study on Comparing Intensities of Burnishing and Machine Hammer Peening Processes. In Procedia CIRP (pp. 371–374). 3rd CIRP Conference on Surface Integrity. http://hdl.handle.net/20.500.12708/67502 ( reposiTUm)
Bleicher, F., & Schörghofer, P. (2016). Intelligente Werkzeug-und Prozesslösungen für eine vernetzte Produktion. In FKM. “KMU 4.0” Intelligente Fertigungstechnologie für kleine und mittelständische Unternehmen, Magdeburg, EU. http://hdl.handle.net/20.500.12708/67553 ( reposiTUm)
Zemann, R., Sacherl, J., Hake, W., & Bleicher, F. (2015). Tool Life Experimente and Vibration Assistance in Regard to the Machining of CFRP. In C. Edtmaier & G. Requena (Eds.), 20th Symposium on Composites (pp. 707–708). Trans Tech Publicationa. http://hdl.handle.net/20.500.12708/67455 ( reposiTUm)
Möhring, H. C., Brecher, C., Abele, E., Fleischer, J., & Bleicher, F. (2015). Materials in machine tool structures. In 65th CIRP Proceedings (pp. 725–749). http://hdl.handle.net/20.500.12708/67326 ( reposiTUm)
Bleicher, F., & Steininger, A. (2015). Influencing the process stability for tapping through and blind holes by taps with radial lubricant supply. In Proc. 38th International MATADOR conference (pp. 128–131). http://hdl.handle.net/20.500.12708/67324 ( reposiTUm)
Steiner, F., & Bleicher, F. (2015). Head flow analysis for a bending process. In 32nd Danubia-Adria symposium on advances in experimental mechanics. 32nd Danubia-Adria Symposium on Advances in Experimental Mechanics, Zilina, EU. Faculty of Mechanical Engineering, University of Zilna, Slovakia. http://hdl.handle.net/20.500.12708/67325 ( reposiTUm)
Möhring, H. C., Kersting, P., Yagüe-Fabra, J. A., & Bleicher, F. (2015). A testpart for interdisciplinary analyses in micro production engineering. In 3rd CIRP Global Web Conference on Production Engineering Research (pp. 106–112). Procedia CIRP. http://hdl.handle.net/20.500.12708/67198 ( reposiTUm)
Scharinger-Urschitz, G., Brier, J., Walter, H., Mertz, R., Bleicher, F., & Haider, M. (2015). New design of a bimetallic finned tube for the use in latent heat thermal energy storage units. In ASME 2015 9th International Conference on Energy Sustainability (p. 13). http://hdl.handle.net/20.500.12708/67232 ( reposiTUm)
Rahmani, M., & Bleicher, F. (2015). Experimental and numerical studies of the influence of geometric deviations in the performance of machine tools linear guides. In 48th Conference on Manufacturing Systems (p. 4). Procedia Cirp - Journal. http://hdl.handle.net/20.500.12708/67233 ( reposiTUm)
Rahmani, M., & Bleicher, F. (2015). Experimental and Analytical Investigations on Normal and Angular Stiffness of linear guides in manufacturing systems. In 48th Conference on Manufacturing Systems (p. 4). Procedia Cirp - Journal. http://hdl.handle.net/20.500.12708/67234 ( reposiTUm)
Bleicher, F., Habersohn, C., & Fuchs, M. (2015). Computer integrated manufacturing and high speed machining. In CIM 2015 - 15th International Scientific Conference on Production Engineering (pp. 19–31). Hrvatska Udruga Proizvodnog Strojarstva, Zagreb. http://hdl.handle.net/20.500.12708/67215 ( reposiTUm)
Fuchs, M., Habersohn, C., Kalkan, Y., Lechner, C., & Bleicher, F. (2015). Metrological investigation of an actuator device for vibration assisted turning. In FME Transactions - Scientific Journal (pp. 119–122). FME Transactions. http://hdl.handle.net/20.500.12708/67244 ( reposiTUm)
Bleicher, F., Pollak, C., & Siller, A. (2015). Precision machining of aluminium and cast iron material combination with a long overhanging boring tool. In The proceedings of MTTRF 2015 Meeting (pp. 239–244). http://hdl.handle.net/20.500.12708/67243 ( reposiTUm)
Bleicher, F., & Fritsche, A. (2015). Dynamic grinding hub monitoring during a high performance grinding process with ceramic CBN on cold work steel. In 12th International Conference on High Speed Machining (pp. 545–551). Trans Tech Publications Ltd., CH. http://hdl.handle.net/20.500.12708/67273 ( reposiTUm)
Krall, S., Lechner, C., Nirtl, M., & Bleicher, F. (2015). Robot based machine hammer peening using an electromagnetic driven hammer device. In 26th DAAAM International Symposium 2015. 26th DAAAM International Symposium 2015, Zadar, EU. http://hdl.handle.net/20.500.12708/67292 ( reposiTUm)
Fritsche, A., & Bleicher, F. (2015). Analysis of the thermal impact on gamma titanium aluminide by grinding with internal coolant supply based on experimental investigation and transient thermal investigation. In Procedia Cirp (pp. 154–159). elsevier. http://hdl.handle.net/20.500.12708/67270 ( reposiTUm)
Zemann, R., & Bleicher, F. (2015). Challenges in the field of machining fibre reinforced polymers. In VSS Vienna young Scientists Symposium 2015 (pp. 164–165). Book-of-abstracts.com. http://hdl.handle.net/20.500.12708/67271 ( reposiTUm)
Siller, A., Steininger, A., & Bleicher, F. (2015). Heat dissipation in turning operations by means of internal cooling. In 25th DAAAM International Symposium on Intelligent Manufacturing & Automation (pp. 1116–1123). Elsevier. http://hdl.handle.net/20.500.12708/67140 ( reposiTUm)
Zemann, R., Sacherl, J., Hake, W., & Bleicher, F. (2015). New measurement processes to define the quality of machined fibre reinforced polymers. In 25th DAAAM International Symposium on Intelligent Manufacturing & Automation (pp. 636–645). Elsevier. http://hdl.handle.net/20.500.12708/67145 ( reposiTUm)
Fritsche, A., & Bleicher, F. (2015). Experimental investigation of the heat flux distribution in grinding of titanium alloy. In 25th DAAAM International Symposium on Intelligent Manufacturing & Automation (pp. 987–993). Elsevier. http://hdl.handle.net/20.500.12708/67147 ( reposiTUm)
Steininger, A., Siller, A., & Bleicher, F. (2015). Investigations regarding process stability aspects in thread tapping Al-Si alloys. In 25th DAAAM International Symposium on Intelligent Manufacturing & Automation (pp. 1124–1132). Elsevier. http://hdl.handle.net/20.500.12708/67146 ( reposiTUm)
Rahmani, M., Krall, S., & Bleicher, F. (2015). Experimental investigations on stick-slip phenomenon and friction characteristics of linear guides. In 25th DAAAM International Symposium on Intelligent Manufacturing & Automation (pp. 1023–1031). Elsevier. http://hdl.handle.net/20.500.12708/67143 ( reposiTUm)
Zemann, R., & Bleicher, F. (2015). Manufacturing of threads in a carbon fibre reinforced polymer. In 32nd Danubia-Adria symposium on advances in experimental mechanics (pp. 42–43). Faculty of Mechanical Engineering, University of Zilna, Slovakia. http://hdl.handle.net/20.500.12708/67257 ( reposiTUm)
Rahmani, M., & Bleicher, F. (2015). Experimental investigation of over determination in machine tools linear guides. In 32nd Danubia-Adria Symposium on Advances in Experimental Mechanics (pp. 112–113). 32nd Danubia-Adria Symposium on Advances in Experimental Mechanics. http://hdl.handle.net/20.500.12708/67258 ( reposiTUm)
Bleicher, F., & Lechner, C. (2014). Surface improvement in mold and die production by machine hammer peening. In The Proceedings of MTTRF 2014 Annual Meeting (pp. 223–238). Machine Tool Technologies Research Foundation. http://hdl.handle.net/20.500.12708/67092 ( reposiTUm)
Heinzl, B., Kastner, W., Leobner, I., Dür, F., Bleicher, F., & Kovacic, I. (2014). Using coupled simulation for planning of energy efficient production facilities. In 2014 Workshop on Modeling and Simulation of Cyber-Physical Energy Systems (MSCPES). Workshop on Modeling and Simulation of Cyber-Physical Energy Systems (MSCPES), Berlin, Germany, EU. https://doi.org/10.1109/mscpes.2014.6842397 ( reposiTUm)
Heinzl, B., Kastner, W., Rößler, M., Bleicher, F., Dür, F., Kovacic, I., Leobner, I., & Popper, N. (2014). Interdisziplinäre Optimierung der Energieeffizienz in Fertigungsbetrieben mittels Co-Simulation. In J. Scheible, I. Bausch-Gall, & C. Deatcu (Eds.), ASIM-Workshop der STS/GMMS 2014 (p. 4). ARGESIM Verlag Wien. http://hdl.handle.net/20.500.12708/55864 ( reposiTUm)
Fritsche, A., & Bleicher, F. (2014). Evaluating and Influencing Dressing Results by Changing the Grain Size Distribution Based on Statistical and Experimental Investigations. In Procedia CIRP (pp. 718–723). GCSM - 12th Global Conference on Sustainable Manufacturing 2014. https://doi.org/10.1016/j.procir.2014.07.078 ( reposiTUm)
Bleicher, F. (2014). WPK 2014 Industrie 4.0 - die intelligente Fabrik der Zukunft. In Industrie 4.0 - die intelligente Fabrik der Zukunft (pp. 3–4). Klein Publishing GmbH. http://hdl.handle.net/20.500.12708/67126 ( reposiTUm)
Bleicher, F. (2014). Neue Technologien in spanenden Werkzeugmaschinen. In Moderne Fertigungstechnologien zur Steigerung von Leistung, Qualität und Effizienz (pp. 34–47). Kongress: Fertigungstechnisches Kolloquium: Möhring, Hans-Christian; Karpuschewski, Bernhard; Bähr, Rüdiger. http://hdl.handle.net/20.500.12708/67155 ( reposiTUm)
Bleicher, F., Lechner, C., Obermair, M., & Krall, S. (2014). Improvement of die casting life time by machine hammer peening. In Proceedings of the 11th International Conference on High Speed Machining (pp. 7–13). Czech Machine Tool Society CMTS. http://hdl.handle.net/20.500.12708/67038 ( reposiTUm)
Fuchs, M., Habersohn, C., Kalkan, Y., Lechner, C., & Bleicher, F. (2014). Metrological Investigation of an actuator device for vibration-assisted turning. In 31st Danubia-Adria Symposium on Advances in Experimental Mechanics (pp. 98–99). VDI Verein Deutscher Ingenieure e.V., Düsseldorf. http://hdl.handle.net/20.500.12708/67048 ( reposiTUm)
Rahmani, M., Zisser-Pfeifer, R., Krall, S., & Bleicher, F. (2014). Experimental Investigation of static stiffness and friction behavior of ball bearing linear motion guides. In 31st Danubia-Adria Symposium on Advances in Experimental Mechanics (pp. 207–208). VDI Verein Deutscher Ingenieure e.V. http://hdl.handle.net/20.500.12708/67049 ( reposiTUm)
Fritsche, A., & Bleicher, F. (2014). Comparison of two state of the art grinding cooling technologies. In 31st Danubia-Adria Symposium on Advances in Experimental Mechanics (pp. 50–51). VDI Verein Deutscher Ingenieure e.V. http://hdl.handle.net/20.500.12708/67042 ( reposiTUm)
Lechner, C., Habersohn, C., Kalkan, Y., & Bleicher, F. (2014). Investigation of the influence of workpiece clamping depended virbration on machine hammer peened surfaces. In 31st Danubia-Adria Symposium on Advances in Experimental Mechanics (pp. 46–47). VDI Verein Deutscher Ingenieure e.V. http://hdl.handle.net/20.500.12708/67043 ( reposiTUm)
Siller, A., Pollak, C., Steininger, A., Bleicher, F., & Jochum, N. (2014). Interdependence of the coolant quality and the formation of a tribochemical reaction in the processing of parallel composite materials in continuous cutting. In 31st Danubia-Adria Symposium on Advances in Experimental Mechanics (pp. 39–40). VDI Verein Deutscher Ingenieure e.V. http://hdl.handle.net/20.500.12708/67044 ( reposiTUm)
Heinzl, B., Rößler, M., Popper, N., Leobner, I., Ponweiser, K., Kastner, W., Dür, F., Bleicher, F., & Breitenecker, F. (2013). Interdisciplinary Strategies for Simulation-Based Optimization of Energy Efficiency in Production Facilities. In Computer Modelling and Simulation (UKSim) (pp. 304–309). http://hdl.handle.net/20.500.12708/55020 ( reposiTUm)
Leobner, I., Kastner, W., Kovacic, I., Heinzl, B., Rößler, M., Dür, F., Flatz, T., Ponweiser, K., & Bleicher, F. (2013). Interdisziplinäre Optimierungsstrategien zu Energieeffizienz in Produktionsbetrieben. In 8. Internationale Energiewirtschaftstagung an der TU Wien (pp. 1–11). http://hdl.handle.net/20.500.12708/55019 ( reposiTUm)
Bleicher, F., Lechner, C., Habersohn, C., Obermair, M., Heindl, F., & Rodríguez Ripoll, M. (2013). Improving the tribological characteristics of tool and mould surfaces by machine hammer peening. In Cirp Annals - ManufacturingTechnology (pp. 239–242). Science Direct. http://hdl.handle.net/20.500.12708/66785 ( reposiTUm)
Mikats, T., Krall, S., & Bleicher, F. (2013). Experimental Investigation of Material Damping in Polymer Concrete and Welded Steel Parts for Machine Tool Quills. In 30th DAS Symposium on Advances in Experimental Mechanics (pp. 230–231). Croation Society of Mechanics. http://hdl.handle.net/20.500.12708/66853 ( reposiTUm)
Obermair, M., Steininger, A., & Bleicher, F. (2013). Experimental Determination of Cutting Forces in Hard Tuning Operations. In 30th DAS Symposium on Advances in Experimental Mechanics (pp. 209–210). Croation Society of Mechanics. http://hdl.handle.net/20.500.12708/66852 ( reposiTUm)
Zemann, R., Fürbacher, R., & Bleicher, F. (2013). A Measurement Technology to define the quality of machined FRP. In 30th DAS Symposium on Advances in Experimental Mechanics (pp. 298–299). Croation Society of Mechanics. http://hdl.handle.net/20.500.12708/66854 ( reposiTUm)
Zemann, R., Kain, L., & Bleicher, F. (2013). Vibration Assisted Machining of Carbon Fibre Reinforced Polymers. In Annals of DAAAM for 2013 & Proceedings of 24th International DAAAM Symposium (pp. 536–543). Procedia Engineering, Elsevier Ltd. http://hdl.handle.net/20.500.12708/66858 ( reposiTUm)
Bleicher, F., & Mikats, T. (2013). Next Generation of Machine Tools - Flexible, Versatile und Highly Productive. In CIM 2013 Computer Integrated Manufacturing and High Speed Machining (pp. 13–23). Croatian Association of Production Engineering. http://hdl.handle.net/20.500.12708/66952 ( reposiTUm)
Heinzl, B., Landsiedl, M., Popper, N., Dimitriou, A.-A., Dür, F., Bleicher, F., Reinisch, C., & Breitenecker, F. (2012). Object-oriented Multi-domain Modelling of Machine Tools: A Case Study. In Proceedings of the European Modeling and Simulation Symposium, 2012 (pp. 471–476). http://hdl.handle.net/20.500.12708/54485 ( reposiTUm)
Buchner, C., Zelenka, Z., Mikats, T., & Bleicher, F. (2012). Determination of forces from 10 N up to 250 kN using two full automatical dead weight machines developed by the BEV. In IMEKO XX World Congress International Measurement Confederation. IMEKO XX World Congress International Measurement Confederation, Busan, Korea, Non-EU. http://hdl.handle.net/20.500.12708/66660 ( reposiTUm)
Gössinger, S., Bauer, C., Lechner, C., & Bleicher, F. (2012). Using Machine Hammer Peening to Realize Defined Surface Structures in Order to Reduce Friction in Turbulent Fluid Flows. In Pumped storage in the context of renewable energy supply (pp. 379–388). http://hdl.handle.net/20.500.12708/66681 ( reposiTUm)
Masset, P., Bleicher, F., Bortolotto, L., & Geiger, G. (2012). Improvement of the Resistance of Titanium Aluminides to Environmental Embrittlement. In 222nd Meeting of ECS. PRIME 2012, 222nd Meeting of ECS, Honolulu, Non-EU. http://hdl.handle.net/20.500.12708/66705 ( reposiTUm)
Sihn, W., Bleicher, F., & Gerhard, D. (2012). Vision and implementation of the Learning and Innovation Factory of the Vienna University of Technology. In W. Sihn & A. Jäger (Eds.), Competitive production in Europe through education and training (pp. 160–177). http://hdl.handle.net/20.500.12708/66537 ( reposiTUm)
Lechner, C., Bleicher, F., Habersohn, C., Bauer, C., & Gössinger, S. (2012). The use of Machine Hammer Peening technology for smoothening and structuring of surfaces. In Annals of DAAAM for 2012 & Proceedings of the 23rd International DAAAM Symposium (pp. 331–337). DAAAM International Vienna, Austria, EU, 2012. http://hdl.handle.net/20.500.12708/66618 ( reposiTUm)
Zemann, R., & Bleicher, F. (2012). Helical Composite Springs. In Proceedings of the 29th Danubia-Adria-Symposium (pp. 10–11). Planeta-Print. http://hdl.handle.net/20.500.12708/66613 ( reposiTUm)
Bleicher, F., Bernreiter, J., & Obermair, M. (2012). Trends in der Fertigungstechnik. In F. Bleicher & M. Obermair (Eds.), Die Zukunft der Fertigungstechnik - Tagungsband Wiener Produktionstechnik Kongress 2012 (pp. 17–32). Neuer Wissenschaftlicher Verlag GmbH Nfg KG. http://hdl.handle.net/20.500.12708/66634 ( reposiTUm)
Bleicher, F., Lechner, C., Habersohn, C., Kozeschnik, E., Adjassoho, B., & Kaminski, H. (2012). Mechanism of surface modification using machine hammer peening technology. In CIRP Annals-Manufacturing Technology (pp. 375–378). CIRP Annals-Manufacturing Technology. http://hdl.handle.net/20.500.12708/66617 ( reposiTUm)
Bleicher, F., & Bernreiter, J. (2012). Machine and Process Interaction by Mechatronics. In Matar 2012 (pp. 1–6). MM Science Journal. http://hdl.handle.net/20.500.12708/66621 ( reposiTUm)
Adjassoho, B., Kozeschnik, E., Lechner, C., Bleicher, F., Gössinger, S., & Bauer, C. (2012). Induction of residual stresses and increase of surface hardness by Machine Hammer Peening technology. In B. Katalinic (Ed.), Annals of DAAAM for 2012&Proceeding of the 23rd International DAAAM Symposium (pp. 697–702). Annals of DAAAM for 2012 & Proceeding of the 23rd International DAAAM Symposium/DAAAM International Vienna. http://hdl.handle.net/20.500.12708/66640 ( reposiTUm)
Bleicher, F., & Bernreiter, J. (2012). Interaktion Maschine - Prozess durch Mechatronik. In Ressourceneffiziente Technologien für den Powertrain (pp. 195–211). Verlag Wissenschaftliche Scripten. http://hdl.handle.net/20.500.12708/66655 ( reposiTUm)
Rößler, M., Landsiedl, M., Bleicher, F., Salvatori, C., Kastner, W., & Breitenecker, F. (2012). Studies on the Thermodynamical Coupling of a Machine Tool and its Environment using the Object-oriented Modelling Approach of Modelica. In Proceedings of the European Modeling and Simulation Symposium (pp. 434–439). http://hdl.handle.net/20.500.12708/54452 ( reposiTUm)
Kozeschnik, E., Adjassoho, B., Lechner, C., Habersohn, C., Bleicher, F., Gössinger, S., & Bauer, C. (2012). Controlled Surface Treatment With Machine Hammer Peening. In METAL 2013 (p. 6). http://hdl.handle.net/20.500.12708/66971 ( reposiTUm)
Orehounig, K., Mahdavi, A., Kovacic, I., Dimitriou, A.-A., Dorn, C., & Bleicher, F. (2012). Concurrent consideration of production processes and building properties for the design of energy-efficient industrial facilities. In IBPC organizing committee (Ed.), Proceedings of the 5th Internaltional Building Physics Conference (pp. 875–881). Organizing Committee of the 5th IBPC. http://hdl.handle.net/20.500.12708/64015 ( reposiTUm)
Dorn, C., Kovacic, I., Orehounig, K., Renger, U., Bleicher, F., Mahdavi, A., Brandstetter, S., & Dimitriou, A.-A. (2011). Energy Efficient Production - Interdisciplinary, Systemic Approach Through Integrated Simulation. In Z. Bogdan (Ed.), Sustainable Development Of Energy, Water And Environment Systems / 2011 / Croatia (pp. 307–320). http://hdl.handle.net/20.500.12708/63906 ( reposiTUm)
Kovacic, I., Orehounig, K., Renger, U., Oberwinter, L., Dorn, C., Bleicher, F., & Mahdavi, A. (2011). A holistic model for an energy efficient production facility. In J. Bartolo (Ed.), 1st International Conference On Sustainable Intelligent Manufacturing. eigene Publikation - Conference. http://hdl.handle.net/20.500.12708/63905 ( reposiTUm)
Zemann, R., Bleicher, F., Puschitz, F., Zisser-Pfeifer, R., & Habersohn, C. (2011). Electrochemical Micromachining of Tungsten. In B. Katalinic (Ed.), Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: “Power of Knowledge and Creativity” (pp. 0927–0928). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/66388 ( reposiTUm)
Zemann, R., Bleicher, F., Puschitz, F., & Zisser-Pfeifer, R. (2011). Electrochemical Micromilling. In Danubia-Adria-Symposium (pp. 287–288). http://hdl.handle.net/20.500.12708/66467 ( reposiTUm)
Zemann, R., Bleicher, F., & Zisser-Pfeifer, R. (2011). Some practical contributions of the technology of electrochemical micromaching with ultra short pulses. In Mollay & Lohrengel (Eds.), Insect 2011 (pp. 62–67). CEST. http://hdl.handle.net/20.500.12708/66471 ( reposiTUm)
Habersohn, C., Puschitz, F., & Bleicher, F. (2011). Controller concept for a highly parallel machine tool. In L. Borbas (Ed.), 28th Danubia-Adria-Symposium (pp. 227–228). Scientific Society for Mechanical Engineering. http://hdl.handle.net/20.500.12708/66496 ( reposiTUm)
Dimitriou, A.-A., Dorn, C., & Bleicher, F. (2011). A Holistic Approach for Energy Efficient Production Facilities. In B. Katalinic (Ed.), Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium "Intelligent Manufacturing & Automation: “Power of Knowledge and Creativity” (pp. 1437–1438). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/66387 ( reposiTUm)
Leobner, I., Ponweiser, K., Dorn, C., & Bleicher, F. (2011). Monitoring of Energy Flows and Optimization of Energy Efficiency in a Production Facility. In RECENT RESEARCHES in GEOGRAPHY, GEOLOGY, ENERGY, ENVIRONMENT and BIOMEDICINE (p. 5). http://hdl.handle.net/20.500.12708/66336 ( reposiTUm)
Heinzl, B., Rößler, M., Popper, N., Landsiedl, M., Dorn, C., Brandstetter, S., Bleicher, F., & Dimitriou, A.-A. (2011). Studies on Multi-Domain Modelling and Thermal Coupling of a Machine Tool. In Tagungsband Abstracts und Fullpapers. ASIM 2011, Winterthur, Schweiz, Non-EU. ZHAW School of Engineering. http://hdl.handle.net/20.500.12708/41104 ( reposiTUm)
Peterko, P., Habersohn, C., Lechner, C., Kaminski, H., Jech, M., & Bleicher, F. (2011). Untersuchung des Einflusses des Schlagverdichtens auf die tribologischen Eigenschaften von Metalloberflächen. In F. Franek (Ed.), Proceedings of the ÖTG Symposium 2011 (pp. 49–56). Österreichische Tribologie Gesellschaft. http://hdl.handle.net/20.500.12708/66484 ( reposiTUm)
Hornikova, A., Durakbasa, M. N., & Bleicher, F. (2010). Re-Calibration Evaluation Utilizing Data Mining Methods. In ISMQC. Osaka University. http://hdl.handle.net/20.500.12708/66121 ( reposiTUm)
Dorn, C., Stark, M., Bleicher, F., & Bernreiter, J. (2010). Analyse Of Load Profile Of A Vertical And Horizontal Machining Center. In 27th Symposium on advances in experimental mechanics (pp. 47–48). http://hdl.handle.net/20.500.12708/66141 ( reposiTUm)
Bleicher, F., & Bernreiter, J. (2010). Hybridbearbeitung von SiC - Optimierung der spanenden Bearbeitung durch Ultraschallanregung. In D. Biermann (Ed.), Zerspanen im modernen Produktionsprozess (pp. 47–55). Vulkan Verlag. http://hdl.handle.net/20.500.12708/66146 ( reposiTUm)
Habersohn, C., Puschitz, F., & Bleicher, F. (2010). Development Of A Virtual Model For An Over-Determined Parallel Kinematics Structure. In 27th Symposium on advances in experimental machanics (pp. 69–70). http://hdl.handle.net/20.500.12708/66143 ( reposiTUm)
Stark, M., Dorn, C., & Bleicher, F. (2010). Energetic Comparison of Machine Tools. In Proceedings of the Junior Scientist Conference 2010. Junior Scientist Conference 2010, Wien, Austria. http://hdl.handle.net/20.500.12708/66144 ( reposiTUm)
Bleicher, F., Zisser-Pfeifer, R., & Zemann, R. (2010). Electrochemical Milling. In B. Katalinic (Ed.), Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium (pp. 843–844). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/66151 ( reposiTUm)
Dorn, C., & Bleicher, F. (2010). Untersuchung zur Energieeffizienz von Werkzeugmaschinen unter Berücksichtigung der kinematischen Struktur und der Prozesskräfte. In Smart Production. Industrielles Symposium Mechatronik, Linz, Austria. http://hdl.handle.net/20.500.12708/66157 ( reposiTUm)
Bleicher, F., Bernreiter, J., Heger, M., Prenner, R., Wallner, S., & Krouzecky, N. (2010). Digital Scale Modelling of rough Boundaries in Spillway Conduits. In 27th Symposium on advances in experimental machanics (pp. 13–14). http://hdl.handle.net/20.500.12708/66145 ( reposiTUm)
Bleicher, F., & Bernreiter, J. (2010). Hybrid-Machining Of Brittle-Hard Materials. In 27th Symposium on advances in experimental machanics (pp. 11–12). http://hdl.handle.net/20.500.12708/66142 ( reposiTUm)
Bernreiter, J., & Bleicher, F. (2010). Hybrid Machining of SiC. In B. Katalinic (Ed.), Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium “Intelligent Manufacturing & Automation: Focus on Interdisciplinary Solutions.” DAAAM International Vienna. http://hdl.handle.net/20.500.12708/66153 ( reposiTUm)
Bleicher, F., Bernreiter, J., & Lechner, C. (2010). 3D Laser Removal - Optimization for Improving Form Errors. In B. Katalinic (Ed.), Annals of DAAAM for 2010 & Proceedings of the 21st International DAAAM Symposium “Intelligent Manufacturing & Automation: Focus on Interdisciplinary Solutions” (pp. 845–846). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/66152 ( reposiTUm)
Lauwers, B., Bleicher, F., Ten Haaf, P., Vanparys, M., Bernreiter, J., Jacobs, T., & Loenders, J. (2010). Investigation of the Process-Material Interaction in Ultrasonic Assisted Grinding of ZrO2 based Ceramic Materials. In 4th CIRP International Conference on High Performance Cutting 2010 (pp. 50–51). CIRP. http://hdl.handle.net/20.500.12708/66114 ( reposiTUm)
Bernreiter, J., & Bleicher, F. (2010). Hybridbearbeitung. In Kunststoff- Cluster: Fachtagung - Spritzgießwerkzeuge (pp. 1–21). http://hdl.handle.net/20.500.12708/66031 ( reposiTUm)
Bleicher, F., & Bernreiter, J. (2010). Mechanische Oberflächenmodifikation und Strukturierung als Technologie für den Werkzeugbau. In Kunststoff- Cluster: Fachtagung - Spritzgießwerkzeuge (p. 18). http://hdl.handle.net/20.500.12708/65889 ( reposiTUm)
Bleicher, F., Dorn, C., & Stark, M. (2009). Performance analysis of machine tools. In B. Katalinic (Ed.), Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium “Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education” (pp. 1793–1794). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/176177 ( reposiTUm)
Herzig, N., Meyer, L. W., Halle, T., Bleicher, F., Puschitz, F., & Dorn, C. (2009). A material based approach of modeling specific cutting force during machining operations including scaling effects. In Conference on Modelling of Machining Operations (pp. 229–236). http://hdl.handle.net/20.500.12708/65822 ( reposiTUm)
Puschitz, F., Bleicher, F., Mikats, T., & Nichol, T. (2009). NC-Controller Strategy For The Novel Machine Tool “X-Cut.” In B. Katalinic (Ed.), Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium “Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education” (pp. 1691–1692). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/65976 ( reposiTUm)
Bleicher, F., & Bernreiter, J. (2009). Mechatronic system for the hybrid machining of brittle hard materials. In B. Katalinic (Ed.), Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium “Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education” (pp. 1831–1832). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/65996 ( reposiTUm)
Nichol, T., Puschitz, F., & Bleicher, F. (2009). Piezoelectic Controlled Sub-Micrometer Machining Station. In B. Katalinic (Ed.), Annals of DAAAM for 2009 & Proceedings of the 20th International DAAAM Symposium “Intelligent Manufacturing & Automation: Focus on Theory, Practice and Education” (pp. 1769–1770). DAAAM International Vienna. http://hdl.handle.net/20.500.12708/65978 ( reposiTUm)
Herzig, N., Bleicher, F., Meyer, L. W., & Halle, T. (2008). Zusammenhänge zwischen werkstoffbedingten Skalierungseffekten und der spezifischen Spankraft. In Modellierung von Größeneinflüssen bei Fertigungsprozessen. DFG Schwerpunktsprogramm 1138 Modellierung von Größeneinflüssen bei Fertigungsprozessen, Chemnitz, EU. Eigenverlag, Chemnitz. http://hdl.handle.net/20.500.12708/65735 ( reposiTUm)
Herzig, N., Bleicher, F., Puschitz, F., & Dorn, C. (2008). Collective Research for High Performance Manufacturing. In 15th International Working Seminar on Production Economic (pp. 163–172). http://hdl.handle.net/20.500.12708/65723 ( reposiTUm)
Sienel, F., & Bleicher, F. (2008). Neues im GAMP5. In F. Bleicher (Ed.), Reinraumtechniktag 2008. http://hdl.handle.net/20.500.12708/65836 ( reposiTUm)
Reiter, M., & Bleicher, F. (2008). Relevante SOPs in Apotheken. In F. Bleicher (Ed.), Reinraumtechniktag 2008. http://hdl.handle.net/20.500.12708/65835 ( reposiTUm)
Mierer, T., & Bleicher, F. (2008). Partikelmessung und Reinraumsimulation. In F. Bleicher (Ed.), Reinraumtechniktag 2008. http://hdl.handle.net/20.500.12708/65837 ( reposiTUm)
Bernreiter, J., & Bleicher, F. (2007). FEM Simulation von Zerspanungsprozessen. In Abaqus Austria User´s Conference 2007 (p. 29). http://hdl.handle.net/20.500.12708/65609 ( reposiTUm)
Bleicher, F., Puschitz, F., & Palatin, T. (2007). High Performance Manufacturing (HPM) a System Adapting Cutting Process. In B. Katalinic (Ed.), DAAAM International Scientific Book 2007. DAAAM International Vienna. http://hdl.handle.net/20.500.12708/65701 ( reposiTUm)
Bleicher, F., Puschitz, F., & Theiner, A. (2006). Laser Based Measurement System for Calibrating Machine Tools in 6 DOF. In R. Neugebauer (Ed.), Parallel Kinematic Machines in Research and Practice (pp. 617–634). Verlag Wissenschaftlicher Scripten. http://hdl.handle.net/20.500.12708/65454 ( reposiTUm)
Bleicher, F., Puschitz, F., & Theiner, A. (2006). LASER BASED MEASURMENT SYSTEM FOR CALIBRATING MACHINE TOOLS IN 6 DOF. In B. Katalinic (Ed.), DAAAM International Scientific Book 2006. DAAAM International Vienna. http://hdl.handle.net/20.500.12708/65455 ( reposiTUm)
Giouroudi, I., Kosel, J., Andrijasevic, D., Hötzendorfer, H., Pfützner, H., Brenner, W., & Bleicher, F. (2006). Magnetostrictive Bilayer Sensor for Micro Torque Measurements. In European Magnetic Sensors & Actuators Conference (pp. 153–161). Book of Abstracts EMSA 2006. http://hdl.handle.net/20.500.12708/66158 ( reposiTUm)

Beiträge in Büchern

Bodur, O., Sterca, D.-A., Sulz, C., & Walcher, E. M. (2022). Improving the Precision of an FDM 3D Printer with Compensation Technique. In F. Bleicher (Ed.), Smart and Networked Manufacturing (Vol. 5, pp. 109–113). ( reposiTUm)
Schulze, V., Bleicher, F., Courbon, C., Gerstenmeyer, M., Meier, L., Philipp, J., Rech, J., Schneider, J., Segebade, E., Steininger, A., & Wegener, K. (2021). Determination of Constitutive Friction Laws appropriate for Simulation of Cutting Processes. In CIRP Journal of Manufacturing Science and Technology. Elsevier. http://hdl.handle.net/20.500.12708/30651 ( reposiTUm)
Reiter, M., Brier, J., & Bleicher, F. (2018). Machining of Iron-Carbon Alloys by the Use of Poly-Crystalline Diamond Cutting Inserts with Internal Cooling. In Journal of Manufacturing and Materials Processing. MDPI. http://hdl.handle.net/20.500.12708/29834 ( reposiTUm)
Bleicher, F., & Kumpf, C. (2017). Schwingungsunterstützte Zerspanung. In Spanende Fertigung (pp. 37–47). Vulkan Verlag. http://hdl.handle.net/20.500.12708/29490 ( reposiTUm)
Zemann, R., Bleicher, F., & Zisser-Pfeifer, R. (2012). Electrochemical Micromachining with ultra short voltage pulses. In The Archive of Mechanical Engineering (pp. 314–327). PAN Polish Academy of Sciences - Committee of Machine Design. http://hdl.handle.net/20.500.12708/27760 ( reposiTUm)
Bleicher, F., & Kittl, B. (2012). Manufacturing Execution Systems für die spanende Fertigung. In D. Biermann (Ed.), Spanende Fertigung (pp. 412–418). Vulkan-Verlag. http://hdl.handle.net/20.500.12708/27793 ( reposiTUm)
Habersohn, C., & Bleicher, F. (2012). Controller Concept for a Highly Parallel Machine Tool. In Engineering Transactions (pp. 315–332). Polish Academy of Sciences - Institute of Fundamental Technological Research. http://hdl.handle.net/20.500.12708/27878 ( reposiTUm)
Zemann, R., Reiss, P. W., Schörghofer, P., & Bleicher, F. (2012). Some Contributions at the Technology of Electrochemical Micromachining with Ultra Short Voltage Pulses. In Cutting Edge Research in New Technologies (pp. 3–28). InTech. http://hdl.handle.net/20.500.12708/27692 ( reposiTUm)
Berger, D., Bleicher, F., Dorn, C., & Puschitz, F. (2008). Optimised Machining of fibre reinforced materials. In B. Katalinic (Ed.), DAAAM International Scientific Book 2008. DAAAM International Vienna. http://hdl.handle.net/20.500.12708/26182 ( reposiTUm)
Bernreiter, J., Dorn, C., Ibrishimov, I., Zisser-Pfeifer, R., & Herzig, N. (2008). Optimierung des Tieflochbohrprozesses von hochlegierten Stählen. In F. Bleicher, J. Kopac, L. W. Meyer, & V. Stich (Eds.), HPM - High Performance Manufacturing (pp. 142–168). Institut für Fertigungstechnik. http://hdl.handle.net/20.500.12708/26172 ( reposiTUm)
Dorn, C., Bleicher, F., & Einspieler, C. (2008). Verbesserung der Maschinengenauigkeit. In F. Bleicher, J. Kopac, L. W. Meyer, & V. Stich (Eds.), HPM - High Performance Manufacturing (pp. 128–141). Institut für Fertigungstechnik. http://hdl.handle.net/20.500.12708/26171 ( reposiTUm)
Bleicher, F., & Herzig, N. (2008). Zusammenhang zwischen dynamischen Werkstoffkennwerten und spezifischer Schnittkraft. In F. Bleicher, J. Kopac, L. W. Meyer, & V. Stich (Eds.), HPM - High Performance Manufacturing (pp. 68–89). Institut für Fertigungstechnik. http://hdl.handle.net/20.500.12708/26170 ( reposiTUm)
Berger, D. (2008). Bearbeitung faserverstärkter Materialien. In F. Bleicher, J. Kopac, L. W. Meyer, & V. Stich (Eds.), HPM - High Performance Manufacturing (pp. 169–184). Institut für Fertigungstechnik. http://hdl.handle.net/20.500.12708/26173 ( reposiTUm)

Bücher

Bleicher, F. (Ed.). (2016). Adaptive and Smart Manufacturing. new academie press. http://hdl.handle.net/20.500.12708/24222 ( reposiTUm)
Bleicher, F., & Lammer, K. (Eds.). (2014). Industrie 4.0 - die intelligente Fabrik der Zukunft. Klein Publishing GmbH. http://hdl.handle.net/20.500.12708/24221 ( reposiTUm)
Bednar, T., Bleicher, F., Dür, F., Eder, K., Flatz, T., Heinzl, B., Kastner, W., Kiesel, K., Kovacic, I., Leobner, I., Orehounig, K., Ponweiser, K., Waltenberger, L., Wiegand, D., & Emrich, S. (2013). Roadmap für Energieeffiziente Fertigungsbetriebe. Konsortium Projekt INFO. http://hdl.handle.net/20.500.12708/23699 ( reposiTUm)
Bleicher, F., & Obermair, M. (Eds.). (2012). Die Zukunft der Fertigungstechnik - Tagungsband Wiener Produktionstechnik Kongress 2012. Neuer Wissenschaftlicher Verlag GmbH Nfg KG. http://hdl.handle.net/20.500.12708/23566 ( reposiTUm)

Tagungsbände

Bleicher, F., Bodur, O., & Trautner, T. F. (Eds.). (2024). Twin Transition in Manufacturing : Wiener Produktionstechnik Kongress 2024 (Vol. 6). TU Wien, Institut für Fertigungstechnik und Photonische Technologien. https://doi.org/10.5281/zenodo.13885006 ( reposiTUm)
Bleicher, F. (Ed.). (2022). Smart and Networked Manufacturing (Vol. 5). ( reposiTUm)

Präsentationen

Bleicher, F., Weigold, M., Trautner, T. F., & Kügerl, L. (2025, January 31). Cooperative Work  Sensor integrated manufacturing [Conference Presentation]. CIRP Winter Meeting Paris, France. http://hdl.handle.net/20.500.12708/213075 ( reposiTUm)
Bleicher, F., Kügerl, L., Volpini, K., & Wurm, F. (2025, January 21). Einfluss des Werkzeugverschleißes auf die Stabilitätsgrenzen im Fräsprozess [Conference Presentation]. ETH Simulationssymposium, Switzerland. ( reposiTUm)
Matschnig, F.-J., Mauthner, G., & Bleicher, F. (2025, April 8). Hybride Fertigung einer Francis Turbine : Ressourcenschonende Produktion durch WAAM [Presentation]. Austrian 3D-Printing Forum, Wien, Austria. ( reposiTUm)
Bleicher, F., & Maier, S. (2024, April 25). Effizienzsteigerung in der Herstellung von Al-Leichtbaukomponenten [Presentation]. Intertool 2024 - Fachmesse, Wels, Austria. ( reposiTUm)
Ottitsch, J. M., Thin, M., Wiesinger, G., & Bleicher, F. (2024, February 21). Mechanical Methods for Photovoltaic Module Recycling [Poster Presentation]. TU Wien Science Day, Wien, Austria. ( reposiTUm)
Bleicher, F., Habersohn, C., Ramsauer, C. M., Greitler, J.-A., Stuhl, D., & Krause, M. W. (2024, February 23). Sensing and actuated work-holding by electric power supply on machine tool table – examples [Conference Presentation]. CIRP Winter Meetings 2024, Paris, France. ( reposiTUm)
Ertelthalner-Nikolaev, D., Saric, Z., Schmid, T., Mertain, W., Kölpl, S., & Bleicher, F. (2024, February 21). 2ARMY – Automated Additive Repair and Manufacturing System [Poster Presentation]. 1st Science Day – Faculty of Mechanical and Industrial Engineering, Wien, Austria. https://doi.org/10.5281/zenodo.7848386 ( reposiTUm)
Ramsauer, C. M., Greitler, J.-A., Einspieler, C., & Bleicher, F. (2024, February 21). Sensor integration in tooling systems for supervised machining [Poster Presentation]. 1st Faculty Science Day of the Faculty of Mechanical and Industrial Engineering (2024), Wien, Austria. ( reposiTUm)
Maier, S., Mauthner, G., Hoffmann, M., Trautner, T. F., & Bleicher, F. (2024, September 26). Data-Driven Optimization of Wire-Arc Additive Manufacturing [Presentation]. Projektabschluss Ad-Proc-Add 2 Stuttgart, Stuttgart, Germany. ( reposiTUm)
Bleicher, F., Trautner, T. F., Habersohn, C., & Hohensulz, C. (2024, June 12). In-situ-Messtechnik als Basis für die autonome Fertigung [Keynote Presentation]. Mahr Innovation Days 2024, Göttingen, Germany. https://doi.org/10.34726/6879 ( reposiTUm)
Hoffmann, M., Maier, S., Mauthner, G., Trautner, T. F., & Bleicher, F. (2024, August 28). Approach for weld bead geometry prediction to optimize process planning in wire arc additive manufacturing applications [Presentation]. Projektabschluss Ad-Proc-Add 2 Österreich, TU Wien - Arsenal, Austria. ( reposiTUm)
Bleicher, F., Kaschnitz-Biegl, S., Wurm, F., & Kügerl, L. (2024, September 10). Schleifen auf Bearbeitungszentren [Keynote Presentation]. Schweizer Schleif-Symposium, 2024, Zürich, Switzerland. ( reposiTUm)
Bleicher, F., Einspieler, C., Greitler, J.-A., Ramsauer, C. M., & Volpini de Maestri, S.-K. (2024, March 12). Sensorintegrierte Werkzeugsysteme für die Bohrbearbeitung von Automobilkomponenten [Conference Presentation]. VDI-Fachtagung Präzisions- und Tiefbohren aktuell 2024, Dortmund, Germany. http://hdl.handle.net/20.500.12708/196166 ( reposiTUm)
Bodur, O., Hohensulz, C., Einspieler, C., Poszvek, G., & Bleicher, F. (2024, February 21). Development of HoloLase MD: Integrating AR Technology with Laser Protection for Healthcare 4.0 [Poster Presentation]. 1st Science Day – Faculty of Mechanical and Industrial Engineering, Wien, Austria. https://doi.org/10.34726/5879 ( reposiTUm)
Ottitsch, J. M., Thin, M., Wiesinger, G., Gassner, A., Einspieler, C., & Bleicher, F. (2024, January 24). PVReValue - Ganzheitliches Recycling von Photovoltaik-Modulen: Partnermeeting [Presentation]. PVReValue Konsortialmeeting 2024, Wien, Austria. ( reposiTUm)
Ottitsch, J. M., Thin, M., Gassner, A., Wiesinger, G., Einspieler, C., & Bleicher, F. (2024, September 26). COMPREHENSIVE ANALYSIS ON MECHANICAL METHODS FOR RECYCLING PHOTOVOLTAIC MODULES [Poster Presentation]. EU PVSEC 2024, Austria. ( reposiTUm)
Bleicher, F., Habersohn, C., & Trautner, T. F. (2024, November 8). In-line-Qualitätskontrolle in der Spritzgusstechnik – InQCIM [Conference Presentation]. Wiener Polymergespräche 2024, Wien, Austria. ( reposiTUm)
Bleicher, F., Saric, Z., Ertelthalner-Nikolaev, D., & Mauthner, G. (2024, November 19). 2ARMY Automated Additive Repair and Manufacturing System - Additive Fertigung – Potenziale für die Wehrtechnik [Conference Presentation]. Technikersymposium 2024, Austria. ( reposiTUm)
Bodur, O., Hohensulz, C., Pecherstorfer, M., Poszvek, G., & Bleicher, F. (2024, February 21). 3GPP Release 16 Indoor Positioning Solution in Private Standalone 5G Networks [Poster Presentation]. 1st Faculty Science Day of the Faculty of Mechanical and Industrial Engineering, Wien, Austria. https://doi.org/10.34726/5759 ( reposiTUm)
Behringer, M., Singer, J., Ottitsch, J. M., Thin, M., Wiesinger, G., Gassner, A., Einspieler, C., & Bleicher, F. (2024, May 14). PVReValue - Ganzheitliches Recycling von Photovoltaik-Modulen - Partnermeeting [Presentation]. PVReValue - Partnermeeting, Kallham, Austria. http://hdl.handle.net/20.500.12708/197464 ( reposiTUm)
Singer, J., Ottitsch, J. M., Thin, M., Wiesinger, G., Gassner, A., Einspieler, C., & Bleicher, F. (2024, October 2). PVReValue - Ganzheitliches Recycling von Photovoltaik-Modulen [Presentation]. PVReValue - Konsortialmeeting Leoben, Austria. http://hdl.handle.net/20.500.12708/201949 ( reposiTUm)
Bleicher, F., Einspieler, C., Greitler, J.-A., Ramsauer, C. M., & Volpini de Maestri, S.-K. (2024, January 25). Adaptive Zerspanungsprozesse durch prozessnahen Einsatz von Sensorik [Presentation]. Intertool 2024 - Fachmesse, Austria. http://hdl.handle.net/20.500.12708/197122 ( reposiTUm)
Matschnig, F.-J., Hoffmann, M., Mauthner, G., Trautner, T. F., & Bleicher, F. (2024, October 10). Hybrid Manufacturing Process Chain for a Speedboat Propeller: A Case Study on Process Sustainability [Conference Presentation]. GCSM - 20th Global Conference on Sustainable Manufacturing, Ho Chi Minh City / Binh Duong, Viet Nam. http://hdl.handle.net/20.500.12708/202906 ( reposiTUm)
Hoffmann, M., Maier, S., Mayr, C., Mauthner, G., Trautner, T. F., & Bleicher, F. (2024). Approach for weld bead geometry prediction to optimize process planning in wire arc additive manufacturing applications [Conference Presentation]. 18th CIRP Conference on Intelligent Computation in Manufacturing Engineering, Neapel, Ischia, Italy. http://hdl.handle.net/20.500.12708/202424 ( reposiTUm)
Baumann, C., Mates, S. P., & Bleicher, F. (2024, February 21). Cutting simulation with a carbon-dependent material model [Poster Presentation]. 1st Faculty Science Day of the Faculty of Mechanical and Industrial Engineering, Wien, Austria. http://hdl.handle.net/20.500.12708/195024 ( reposiTUm)
Saric, Z., Ertelthalner-Nikolaev, D., Mauthner, G., & Bleicher, F. (2024, July 11). Evaluation of automatic geometry acquisition and point cloud registration methods for the repair of metallic components using Wire-Arc Additive Manufacturing [Conference Presentation]. 18th CIRP Conference on Intelligent Computation in Manufacturing Engineering - Innovative and Cognitive Technology and Systems, Ischia, Italy. http://hdl.handle.net/20.500.12708/207995 ( reposiTUm)
Bleicher, F., & Prießnitz, M. (2024, August 18). Reluctance Based Actuator for Discrete Machine Hammer Peening [Conference Presentation]. 73rd CIRP General Assembly, Thessaloniki, Greece. ( reposiTUm)
Bleicher, F. (2024, August 23). Collaborative Work data acquisition, analysis and control of machining processes [Conference Presentation]. 2024 CIRP General Assembly, Greece. ( reposiTUm)
Trautner, T. F., Mauthner, G., & Bleicher, F. (2024, February 15). Arbeitsgruppe CAx Austria 4. Treffen: Workshop Fronius [Presentation]. 4. Treffen Arbeitsgruppe CAx Austria, Pettenbach, Austria. ( reposiTUm)
Trautner, T. F., Mauthner, G., Poszvek, G., & Bleicher, F. (2024, June 11). Arbeitsgruppe CAx Austria 5. Treffen: Workshop IFT [Presentation]. 5. Treffen Arbeitsgruppe CAx Austria, Vienna, Austria. http://hdl.handle.net/20.500.12708/210965 ( reposiTUm)
Kügerl, L., Wurm, F., Volpini de Maestri, S.-K., Greitler, J.-A., & Bleicher, F. (2024, November 1). PROZESS STABILITY EVALUATION USING A SENSOR INTEGRATED TOOL HOLDER [Conference Presentation]. 12. UTIS - INTERNATIONAL CONGRESS ON MACHINING, Antalya, Turkey. http://hdl.handle.net/20.500.12708/204193 ( reposiTUm)
Bleicher, F., Einspieler, C., Greitler, J.-A., Ramsauer, C. M., & Volpini de Maestri, S.-K. (2024, April 10). Adaptive Zerspanungsprozesse durch prozessnahen Einsatz von Sensorik [Presentation]. AFA-Exkursion zur Fa. Fill, Gurten, Austria. http://hdl.handle.net/20.500.12708/210246 ( reposiTUm)
Bleicher, F. (2023, February 2). Trends und neue Kollaborationsmodelle in der Fertigungsindustrie [Poster Presentation]. SAP-Innovationsveranstaltung, Seestadt Pilotfabrik, Austria. ( reposiTUm)
Nikolaev, D., Saric, Z., & Bleicher, F. (2023, April 25). 2ARMY II: Automated Additive Repair and Manufacturing System II [Conference Presentation]. 3. Fachtagung FORTISSIMO, MARTIN-Kaserne, Ing. Hans-Sylvester-Straße 6, 7000 Eisenstadt, Austria. https://doi.org/10.5281/zenodo.7875717 ( reposiTUm)
Bleicher, F., Trautner, T. F., & Agovic, A. (2023, February 14). Arbeitsgruppe CAx Austria 2. Treffen: Workshop EVVA [Presentation]. 2. Treffen der Arbeitsgruppe CAx Austria, Firma EVVA, Wien, Austria. ( reposiTUm)
Nikolaev, D., Saric, Z., Schmid, T., Mertain, W., Kölpl, S., & Bleicher, F. (2023, April 25). 2ARMY: Automated Additive Repair and Manufacturing System [Poster Presentation]. 3. Fachtagung FORTISSIMO, MARTIN-Kaserne Ing. Hans-Sylvester-Straße 6, 7000 Eisenstadt, Austria. https://doi.org/10.5281/zenodo.7848387 ( reposiTUm)
Wiesauer, M., & Bleicher, F. (2023, January 17). Simulation des posenabhängigen dynamischen Verhaltens von Werkzeugmaschinen unter Berücksichtigung eines detaillierten Regeleinrichtungs- und Reibungsmodells [Conference Presentation]. 4. Simulations-Symposium, ETH-Zürich, Switzerland. ( reposiTUm)
Bleicher, F., & Trautner, T. F. (2023, August 23). Digitalisierung und KI für KMU Best Practice aus Sicht der Forschung [Presentation]. Werkstoffworkshop Alpbach 2023, Alpbach, Austria. ( reposiTUm)
Bleicher, F., Trautner, T. F., & Mauthner, G. (2023, November 20). Arbeitsgruppe CAx Austria 3. Treffen: Workshop ENGEL [Presentation]. 3. Treffen Arbeitsgruppe CAx Austria, Wien, Austria. ( reposiTUm)
Bleicher, F. (2023, April 27). Zerspanung der Zukunft unter besonderer Berücksichtigung des Themas E-Mobility [Presentation]. E-Mobility Days EMCO 2023, Austria. ( reposiTUm)
Bleicher, F. (2023, May 3). Industrienahe Forschung und Entwicklung in der Fertigungstechnik als Treiber der  “Green and Digital Transition” für den Wirtschaftsstandort Österreich [Presentation]. Industriellenvereinigung Wien - Besichtigung TEC-Labor, Wien, Austria. ( reposiTUm)
Bleicher, F., Ramsauer, C. M., Greitler, J.-A., & Einspieler, C. (2023, November 10). Einfluss des Trägerkörperverhaltens auf den Schleifvorgang – sensorisierte Systeme für den adaptiven Schleifprozess [Presentation]. A.Haas GrindDialog 2023, Austria. ( reposiTUm)
Bleicher, F., Mauthner, G., Ertelthalner-Nikolaev, D., & Hoffmann, M. (2023, May 11). Fertigungszelle für die Hybridbearbeitung : Neue Möglichkeiten zur Fertigung von Werkstücken mit komplexer Geometrie [Presentation]. Technokontakte Seminar Pilotfabrik 2023, Wien, Austria. ( reposiTUm)
Mauthner, G., & Bleicher, F. (2023, November 16). Optimierung von Zerspanungsprozessen mit Simulation [Presentation]. Turbocharge Your NPI and Continuous Improvement with Digital Analysis 2023, Online, Austria. ( reposiTUm)
Trautner, T. F., Hohensulz, C., & Bleicher, F. (2023, June 15). 5G in der Produktion: Forschung und Innovation am Institut für Fertigungstechnik [Keynote Presentation]. Drei 5G+ Business Breakfast:, Wien, Austria. ( reposiTUm)
Bleicher, F. (2023, December 1). Towards autonomous machining cells [Presentation]. Vorlesung an Kyoto University 2023, Japan. ( reposiTUm)
Bleicher, F., Mauthner, G., Ertelthalner-Nikolaev, D., Saric, Z., & Hoffmann, M. (2023, September 13). Fertigungszelle für die Hybridbearbeitung -  Neue Möglichkeiten zur Fertigung von Werkstücken  mit komplexer Geometrie [Conference Presentation]. 50 Jahre ISF - Fachgespräch zwischen Industrie und Hochschule 2023, Dortmund, Germany. ( reposiTUm)
Ottitsch, J. M., Thin, M., Wiesinger, G., & Bleicher, F. (2023, November 7). Mechanical Methods for Photovoltaic Module Recycling [Poster Presentation]. Österreichische Fachtagung für Photovoltaik und Stromspeicherung 2023, Graz, Austria. ( reposiTUm)
Bleicher, F., Wuschko, S., Trautner, T. F., & Mauthner, G. (2023, September 21). Durchgängige CAD-CAM-CNC Prozesskette als Basis für ein feature-basiertes Energiedatenmonitoring [Conference Presentation]. MAT-DAYS 2023, St. Pölten, Austria. ( reposiTUm)
Baumann, C., Mates, S. P., Krall, S., Maier, S., & Bleicher, F. (2023, December 5). Investigating the Utility of a Complex Material Model for Simulating Carbon Steel Machining [Conference Presentation]. 16. International Nordmetall Colloquium, Chemnitz, Germany. http://hdl.handle.net/20.500.12708/190412 ( reposiTUm)
Bleicher, F., Biermann, D., Drossel, W.-G., Möhring, H. C., & Altintas, Y. (2023, November 29). Sensor and Actuator Integrated Tooling Systems [Presentation]. CIRP Japan Group Meeting 2023, Japan. http://hdl.handle.net/20.500.12708/191841 ( reposiTUm)
Deshpande, A., Agiwal, H., Baumann, C., Krall, S., Bleicher, F., & Pfefferkorn, F. (2023, June 16). Recycling Metal Cutting Chips into a Consolidated Coating Deposition with Friction Surfacing [Conference Presentation]. 51st SME North American Manufacturing Research Conference 2023, New Brunswick, New Jersey, United States of America (the). http://hdl.handle.net/20.500.12708/191040 ( reposiTUm)
Bleicher, F., Zenz, K., Sulz, C., & Poszvek, G. (2023, July 14). A statistical approach for characterizing the compressive stress of foams via computed tomography [Conference Presentation]. CIRP ICME ’23 Conference: 17th CIRP International Conference on Intelligent Computation in Manufacturing Engineering, Ischia, Italy. http://hdl.handle.net/20.500.12708/187710 ( reposiTUm)
Tonejca, L., Mayer, C., Trautner, T. F., Mauthner, G., & Bleicher, F. (2023, July 12). CNC Machine Tool Focused Edge Computing in Manufacturing [Conference Presentation]. CIRP ICME ’23 Conference: 17th CIRP International Conference on Intelligent Computation in Manufacturing Engineering, Ischia, Italy. https://doi.org/10.34726/5454 ( reposiTUm)
Thin, M., Ottitsch, J. M., Wiesinger, G., Gassner, A., Einspieler, C., & Bleicher, F. (2023, September 4). PVReValue - Ganzheitliches Recycling von Photovoltaik-Modulen: Partnermeeting [Presentation]. PVReValue Meeting @ SAL 2023, Villach/St. Magdalen, Austria. http://hdl.handle.net/20.500.12708/189758 ( reposiTUm)
Trautner, T. F., Tonejca, L., & Bleicher, F. (2023, June 5). The European Production Ecosystem driving Circular Economy through Gaia-X [Presentation]. Manufacturing Performance Days: Finish-Austrian bilateral Workshop ”Industry 4.0 for a resource efficient and cleaner production” 2023, Tampere, Finland. http://hdl.handle.net/20.500.12708/192421 ( reposiTUm)
Bleicher, F., Krall, S., & Pöchgraber, G. (2022, November 10). Traak4.0  Präsentation [Presentation]. TRAAK 4.0 USERTREFFEN, Austria. ( reposiTUm)
Mauthner, G., Trautner, T. F., & Bleicher, F. (2022, November 17). CAMplus4.0 - Training for CAD/CAM and Simulation [Poster Presentation]. EIT Manufacturing Summit 2022, Austria. ( reposiTUm)
Trautner, T. F., Mauthner, G., & Bleicher, F. (2022, September 21). Kick-Off zur CAM Plattform Austria - Vorstellung - Mission, Vision und Motivation [Presentation]. 1. Workshop zur CAM Plattform Austria, TEC-Lab, Arsenal, Austria. ( reposiTUm)
Bleicher, F., & Mauthner, G. (2022, March 15). Optimierung der CAD-, CAM-, CNC-Kette [Poster Presentation]. Vortrag - Technokontakte, TU-Wien, Arsenal, Austria. ( reposiTUm)
Bleicher, F., Krall, S., Gössinger, S., Schaubmayr, P., Nikolaev, D., Hoffmann, M., Maier, S., & Mauthner, G. (2022). Hybride Fertigung mittels durchgängiger CAD/CAM Systemkette. Austrian 3D-Printing Forum, Wien, Austria. http://hdl.handle.net/20.500.12708/95660 ( reposiTUm)
Sulz, C., & Bleicher, F. (2022, February 15). Personendetektion für Koordinatenmessgeräte und Clay-Modelliermaschinen [Presentation]. Projektmeeting, online, Austria. ( reposiTUm)
Bleicher, F., Peherstorfer, H. M., Leitner, D., & Ramsauer, C. M. (2022, September 6). Einfluss des Dämpfungsverhaltens von Trägerkörpern auf das Außen-Rundschleifen mit CBN-Schneidstoff [Conference Presentation]. Schweizer Schleif-Symposium 2022, ETH Zürich, Switzerland. ( reposiTUm)
Mauthner, G., Trautner, T. F., & Bleicher, F. (2022, September 21). CAM Plattform Austria - Gemeinsam dem Fachkräftemangel entgegenwirken [Presentation]. 1. Workshop zur CAM Plattform Austria, TEC-Lab, Arsenal, Austria. ( reposiTUm)
Mauthner, G., Hoffmann, M., & Bleicher, F. (2022, April 25). Hybride Fertigungszelle und sensorische Werkzeuge [Presentation]. Technokontakte Seminar Pilotfabrik, Seestadt Pilotfabrik, Austria. ( reposiTUm)
Bleicher, F., & Pöchgraber, G. (2022, August 17). Institutsvorstellung für Fundermax GmbH [Presentation]. Institutsvorstellung FunderMax, Austria. ( reposiTUm)
Sulz, C., & Bleicher, F. (2022, January 21). Kick-Off: Personendetektion für Koordinatenmessgeräte und Ton-Modelliermaschinen [Presentation]. Kick-Off Meeting, Austria. ( reposiTUm)
Bleicher, F., & Jaunecker, D. (2022, October 12). Schwingungsunterstütztes ELB-Verfahren bei kleinen Durchmessern [Conference Presentation]. VDI-Fachtagung Präzisions- und Tiefbohren aktuell 2022, UNI Stuttgart, Germany. ( reposiTUm)
Bleicher, F., & Trautner, T. F. (2022, September 15). „Industry 5.0“ - still digital production [Keynote Presentation]. IMPROVE! Endevent, Wr. Neustadt, Austria. ( reposiTUm)
Bleicher, F. (2022, June 7). Neue Möglichkeiten zur Fertigung von Werkstücken mit komplexer Geometrie [Presentation]. AM Seminar - Net4Future, Arsenal Objekt 221, Austria. ( reposiTUm)
Bleicher, F., & Trautner, T. F. (2022, September 22). EUproGigant – die GAIA-X-Dateninfrastruktur durchdringt die Produktion [Conference Presentation]. ACO-TEC Konferenz, Andaz Vienna Am Belvedere (Hyatt) Hotel, Wien, Austria. ( reposiTUm)
Bleicher, F., Mauthner, G., Nikolaev, D., & Hoffmann, M. (2022, April 25). Fertigungszelle für die Hybridbearbeitung [Poster Presentation]. Technokontakte Seminar Pilotfabrik, Seestadt Pilotfabrik, Austria. http://hdl.handle.net/20.500.12708/136011 ( reposiTUm)
Bleicher, F., Nikolaev, D., Mauthner, G., & Schaubmayr, P. (2022, March 30). Fertigungszelle für die Hybridbearbeitung [Poster Presentation]. 50 Jahre ISF, IFT-Arsenal OA, Austria. ( reposiTUm)
Bleicher, F., & Prießnitz, M. (2022, October 12). Bohrbearbeitung von CFK-Metall-Schichtverbundwerkstoffen [Conference Presentation]. VDI-Fachtagung Präzisions- und Tiefbohren aktuell 2022, Stuttgart, Germany. ( reposiTUm)
Saric, Z., Bleicher, F., Krall, S., Nikolaev, D., & Prießnitz, M. (2022, May 13). Untersuchung der Randzonenintegrität vonSLM-gedruckten Zugproben durch maschinelles Oberflächenhämmern am Beispiel von Maraging-Stahl [Conference Presentation]. 3. Fachtagung Werkstoffe und Additive Fertigung, Dresden, Germany. http://hdl.handle.net/20.500.12708/153364 ( reposiTUm)
Agiwal, H., Baumann, C., Krall, S., Yeom, H., Sridharan, K., Bleicher, F., & Pfefferkorn, F. (2022, July 1). Towards Multilayered Coatings of 304L Stainless Steels Using Friction Surfacing [Conference Presentation]. Manufacturing Science and Engineering Conference (MSEC 2022), United States of America (the). http://hdl.handle.net/20.500.12708/192923 ( reposiTUm)
Krall, S., Baumann, C., Agiwal, H., Bleicher, F., & Pfefferkorn, F. (2022, June 30). Investigation Of Multilayer Coating Of En Aw 6060 - T66 Using Friction Surfacing [Conference Presentation]. XXXIII CIRP Sponsored Conference on Supervising and Diagnostics of Machining Systems, KARPACZ, Poland. http://hdl.handle.net/20.500.12708/153784 ( reposiTUm)
Bleicher, F., Baumann, C., Krall, S., & Pfefferkorn, F. (2022, August 25). Recycling and Upcycling of chips waste material by using friction surfacing [Conference Presentation]. CIRP STC-CWG Industrial Symbiosis 2022, Bilbao, Spain. http://hdl.handle.net/20.500.12708/153367 ( reposiTUm)
Ramsauer, C. M., Oswald, R., Schörghofer, P., Leder, N., Schmitz, T. L., & Bleicher, F. (2022, June 27). Primary Testing of an Instrumented Tool Holder for Brush Deburring of Milled Workpieces [Conference Presentation]. 33nd CIRP Sponsored Conference on Supervising and Diagnostics of Machining Systems, KARPACZ, Poland. http://hdl.handle.net/20.500.12708/154301 ( reposiTUm)
Mauthner, G., Christopher Mentrup, Simon Waldl, Einspieler, C., Krall, S., Baumann, C., Bleicher, F., & Trautner, T. F. (2022, November 29). CAD/CAM und Simulation für EinsteigerInnen [Presentation]. EIT Manufacturing Seminar - CAMplus4.0, TEC-Lab Arsenal, Austria. http://hdl.handle.net/20.500.12708/154251 ( reposiTUm)
Mauthner, G., Hoffmann, M., Gommel Daniel, & Bleicher, F. (2022, December 5). Modellierung und Simulation für drahtbasiertes Auftragsschweißen (WAAM) [Presentation]. EIT Manufacturing TRAM Seminar, TEC-Lab Arsenal, Austria. http://hdl.handle.net/20.500.12708/154254 ( reposiTUm)
Mauthner, G., Votruba, W., Ramsauer, C. M., Plessing, L., Trautner, T. F., & Bleicher, F. (2022, July 1). Development of a CAM-in-the-Loop System for Cutting Parameter Optimization using an Instrumented Tool Holder [Conference Presentation]. 55th CIRP Conference on Manufacturing Systems, Lugano, Switzerland. http://hdl.handle.net/20.500.12708/187815 ( reposiTUm)
Mauthner, G., Gommel Daniel, Hoffmann, M., & Bleicher, F. (2022, November 15). Modellierung und Simulation für drahtbasiertes Auftragsschweißen (WAAM) [Presentation]. EIT Manufacturing Seminar - TRAM, TEC-Lab Arsenal, Austria. http://hdl.handle.net/20.500.12708/154244 ( reposiTUm)
Bleicher, F., Mauthner, G., Hoffmann, M., Wallner, B. J., Gommel Daniel, & Maier, S. (2022, June 7). Hybride Prozessketten und kosteneffiziente Bauteilauslegung [Presentation]. Zukunftsakademie Mostviertel - Additive Fertigung Modul 3, Pilotfabrik Seestadt, Austria. http://hdl.handle.net/20.500.12708/154239 ( reposiTUm)
Bleicher, F., & Mauthner, G. (2021). Digital Production - from material models ti circular economy. European Forum Alpach 2021, Alpach, Austria. http://hdl.handle.net/20.500.12708/95497 ( reposiTUm)
Bleicher, F. (2021). Einleitung & Projekt BAMA. AfA-Webinar zum Thema “Energieeffiziente Zerspanung,” Online als Webinar, Austria. http://hdl.handle.net/20.500.12708/95613 ( reposiTUm)
Pöchgraber, G., & Bleicher, F. (2021). Das Institut für Fertigungstechnik und photonische Technologien im Bereich der industriellen Forschung. Das Institut für Fertigungstechnik und photonische Technologien im Bereich der industriellen Forschung, Fa. Lindt Sprüngli. Trufo, Austria. http://hdl.handle.net/20.500.12708/95632 ( reposiTUm)
Pöchgraber, G., & Bleicher, F. (2021). Präsentation - Industriedesign. Das Institut für Fertigungstechnik und photonische Technologien im Bereich der industriellen Forschung - Präsentation Industriedesign, Universität für angewandte Kunst, Austria. http://hdl.handle.net/20.500.12708/95633 ( reposiTUm)
Bleicher, F., & Mauthner, G. (2021, March 9). Optimierung der CAD-CAM-CNC Kette [Presentation]. TechnoKontakte - Wissen aus der Unternehmenspraxis, Online, Austria. ( reposiTUm)
Pöchgraber, G., & Bleicher, F. (2020). Erstellung einer Zertifizierungsroadmap für smarte Komponenten in der Produktion. Expertengespräch TÜV Austria, TÜV Austria, Austria. http://hdl.handle.net/20.500.12708/95637 ( reposiTUm)
Singer, F., Pickel, L., Pöchgraber, G., & Bleicher, F. (2020). Feasibility study for optical detection of empty and contaminated trays in security checks via deep learning. Adaptive Vision Sp. z o.o., TU-Wien Videovortrag, Austria. http://hdl.handle.net/20.500.12708/95358 ( reposiTUm)
Schörghofer, P., Pauker, F., Leder, N., Mangler, J., Ramsauer, C. M., & Bleicher, F. (2019). Using Sensory Tool Holder Data for Optimizing Production Processes. CIRP Sponsored Conference on Supervising and Diagnostics of Machining Systems, KARPACZ, Poland. http://hdl.handle.net/20.500.12708/95161 ( reposiTUm)
Reiter, M., & Bleicher, F. (2019). Affectation of chip formation in single-lip deep hole drilling at small diameters by application of low-frequency vibration support. HSM-Konferenz, Prag, Czechia. http://hdl.handle.net/20.500.12708/95175 ( reposiTUm)
Bleicher, F., Wiesinger, G., Sulz, C., Singer, F., & Schwaiger, C. (2019). Vorstellung des Projektkonzeptes. Kick off Meeting CDP MFP 32 Behringer AVK, Wien, Austria. http://hdl.handle.net/20.500.12708/95159 ( reposiTUm)
Bleicher, F. (2019). Sensorische Werkzeugaufnahme zur In-Prozess-Regelung bei Zerspanungsvorgängen. Fertigungstechnisches Kolloquium ETH-Zürich, Hauptgebäude ETH Zürich, Hörsaal HG D1.2, Rämistrasse 101, 8092 Zürich, Germany. http://hdl.handle.net/20.500.12708/95326 ( reposiTUm)
Bleicher, F., Leder, N., Schörghofer, P., & Brunnbauer, M. (2019). Adaptive und hybride Fertigungseinrichtungen. DMG MORI bei HEITEC, HEITEC Systemtechnik GmbH Betriebsgebiet Nord 47 3300 Ardagger-Stift, Austria. http://hdl.handle.net/20.500.12708/95325 ( reposiTUm)
Bleicher, F., & Steininger, A. (2019). Additive Prozesskette zur Herstellung von optimierten Zerspan-Werkzeugen. 3D-Printing-Forum, Wien, Austria. http://hdl.handle.net/20.500.12708/95317 ( reposiTUm)
Bleicher, F., & Hunschofsky, H. (2019). A Chance for Reindustrialization? WU-Vortragsreiche-Industrie 4.0, Wien, Austria. http://hdl.handle.net/20.500.12708/95319 ( reposiTUm)
Bleicher, F., & Krall, S. (2019). Oberflächenmodifikation durch Machine Hammer Peening. DGM-Fachausschüsse, TU-Wien, Austria. http://hdl.handle.net/20.500.12708/95272 ( reposiTUm)
Bleicher, F. (2019). Die 4. industrielle Revolution - Auswirkungen auf Wertschöpfungsnetzwerke und Supply Chains. 5. BMÖ-Expertendialog Einkauf 4.0, Haus der Industrie (Wien), Austria. http://hdl.handle.net/20.500.12708/95271 ( reposiTUm)
Bleicher, F., Stonawski, R., Platzer, J., & Travnicek, P. (2019). Inkrementelles Freiformbiegen von Thermoplasten. SKZ-Fachtagung, Würzburg, Germany. http://hdl.handle.net/20.500.12708/95269 ( reposiTUm)
Bleicher, F. (2019). Smarte Produktion; flexibel, wandlungsfähig und autonom. DBT - Digital Bussines Trends, Haus der Musik (Wien), Austria. http://hdl.handle.net/20.500.12708/95270 ( reposiTUm)
Bleicher, F., Leder, N., & Schörghofer, P. (2019). Sensorische Werkzeugaufnahme für die adaptive Steuerung von Zerspanungsprozessen. PRÄZISIONSWERKZEUGE für die spanende Fertigung, Stuttgart-Nürtingen, Germany. http://hdl.handle.net/20.500.12708/95265 ( reposiTUm)
Bleicher, F. (2019). Die Kunst der Herstellung nicht gerader Bohrungen. PRÄZISIONSWERKZEUGE für die spanende Fertigung, Stuttgart-Nürtingen, Germany. http://hdl.handle.net/20.500.12708/95266 ( reposiTUm)
Wiesinger, G., Finkeldei, D., Baumann, C., Petzenhammer, F., & Bleicher, F. (2018). Previous benchmarks at the TU Wien. AfA Jahresabschluss 2018, Institut für Fertigungstechnik und Hochleistungslasertechnik der TU Wien TEC-Lab Labor für Fertigungstechnik, Franz Grill Straße 4, Objekt 221, 1030 Wien, Austria. http://hdl.handle.net/20.500.12708/94962 ( reposiTUm)
Finkeldei, D., Wiesinger, G., & Bleicher, F. (2018). Results of the 3rdFiberCutBenchmark. AfA Jahresabschluss 2018, Institut für Fertigungstechnik und Hochleistungslasertechnik der TU Wien TEC-Lab Labor für Fertigungstechnik, Franz Grill Straße 4, Objekt 221, 1030 Wien, Austria. http://hdl.handle.net/20.500.12708/94963 ( reposiTUm)
Bleicher, F. (2018). Current research topics at the IFT. AfA Jahresabschluss 2018, Institut für Fertigungstechnik und Hochleistungslasertechnik der TU Wien TEC-Lab Labor für Fertigungstechnik, Franz Grill Straße 4, Objekt 221, 1030 Wien, Austria. http://hdl.handle.net/20.500.12708/94965 ( reposiTUm)
Bleicher, F. (2018). By detail integration towards the “system of systems.” EPLAN Veranstaltung in der Industrie 4.0 Fabrik, Wien; Aspern IQ, Austria. http://hdl.handle.net/20.500.12708/94967 ( reposiTUm)
Bleicher, F. (2018). Innovative Detaillösungen für das Produktionssystem der Zukunft. Wirtschaft 4.0-Regionalveranstaltung, Eggersdorfer Str. 29, 3300 Amstetten, Austria. http://hdl.handle.net/20.500.12708/94969 ( reposiTUm)
Bleicher, F., Wiesinger, G., Kumpf, C., Finkeldei, D., Baumann, C., & Lechner, C. (2018). Schwingungsunterstützte Bearbeitung von CFK/Stahl-Hybridwerkstoffen. AfA-Exkursion-Pöttinger, PÖTTINGER Landtechnik GmbH: Industriegelände 1; 4710 Grieskirchen, Austria. http://hdl.handle.net/20.500.12708/94868 ( reposiTUm)
Bleicher, F. (2018). System of systems for machining by standardized integration. Industrie 4.0, Fa. Berndorf, Austria. http://hdl.handle.net/20.500.12708/95087 ( reposiTUm)
Bleicher, F. (2018). Durch innovative Detaillösungen zum Produktionssystem der Zukunft. e-Day:18, WKO, Austria. http://hdl.handle.net/20.500.12708/95086 ( reposiTUm)
Bleicher, F. (2018). Industrial Internet ofThings: Potential, Märkte, Zukunft der Produktion. Webinar, The Surveying & Spatial Sciences Institute (SSSI) in Australia, Australia. http://hdl.handle.net/20.500.12708/95091 ( reposiTUm)
Bleicher, F. (2018). Geometrische Produktspezifikation in den Produktionsprozessen der Zukunft. Workshop Industrievermessung, Research Group Engineering Geodesy, Austria. http://hdl.handle.net/20.500.12708/95089 ( reposiTUm)
Bleicher, F. (2018). Durch Digitalisierung zur energieeffizienten Produktion von morgen. Energiegespräche, Wien, Austria. http://hdl.handle.net/20.500.12708/95090 ( reposiTUm)
Bleicher, F. (2018). PilotfabrikIndustrie4.0. Industrie 4.0, Fa. Berndorf, Austria. http://hdl.handle.net/20.500.12708/95088 ( reposiTUm)
Bleicher, F. (2018). Surface Modification by Machine Hammer Peening. International Symposium on Process Signatures 2018, Bremen, Germany. http://hdl.handle.net/20.500.12708/95048 ( reposiTUm)
Bleicher, F. (2018). Prozess - Werkzeug - Maschine im Kommunikationssystem “Fertigungstechnik der Zukunft.” 13. Schmalkalder Werzeugtagung, Schmalkalden, Germany. http://hdl.handle.net/20.500.12708/95045 ( reposiTUm)
Finkeldei, D., & Bleicher, F. (2018). Analysis of chip formationin machining nickel based and gamma titanium alloys. Titanium USA 2018 Konferenz, Las Vegas, United States of America (the). http://hdl.handle.net/20.500.12708/95041 ( reposiTUm)
Raschendorfer, A., & Bleicher, F. (2018). Towards Autonomous Machining. ICSM 2018, Shanghai, China. http://hdl.handle.net/20.500.12708/95025 ( reposiTUm)
Bleicher, F. (2017). Das Produktionssystem der Zukunft. Workshop Digitrans, Flughafen Wien Schwechat, Austria. http://hdl.handle.net/20.500.12708/94815 ( reposiTUm)
Bleicher, F. (2017). Industrie 4.0 - Die intelligente Fabrik der Zukunft. 26. Leobener Kunststoff-Kolloquium, Leoben, Austria. http://hdl.handle.net/20.500.12708/94735 ( reposiTUm)
Bleicher, F., & Akhavei, F. (2017). Digitaler Wandel in der Produktionstechnik. Seminar - Industrie 4.0, Althofen, Austria. http://hdl.handle.net/20.500.12708/94795 ( reposiTUm)
Bleicher, F., Akhavei, F., & Pöchgraber, G. (2017). Studie Supply Chain 4.0. Seminar - Industrie 4.0, Althofen, Austria. http://hdl.handle.net/20.500.12708/94797 ( reposiTUm)
Bleicher, F. (2017). Auswirkungen und Trends der Digitalisierung auf die Produktion. 2. Enterprise 4.0 Forum, Wien, Austria. http://hdl.handle.net/20.500.12708/94804 ( reposiTUm)
Bleicher, F., & Siller, A. (2017). Zerspanung von Werkstoffverbunden in der Bearbeitung von Motorkomponenten unter Einsatz innengekühlter Werkzeuge. PRÄZISIONSWERKZEUGE für die spanende Fertigung, Stuttgart-Nürtingen, Germany. http://hdl.handle.net/20.500.12708/94754 ( reposiTUm)
Bleicher, F., & Steininger, A. (2017). Aktive Beeinflussung von Tiefbohrprozessen zur Reduktion des Bohrungsmittenverlaufes. VDI-Fachtagung Präzisions- und Tiefbohren aktuell 2017, Stuttgart, Germany. http://hdl.handle.net/20.500.12708/94737 ( reposiTUm)
Bleicher, F. (2017). Factory of the Future -Towards system of systems. Future Factory Conference, Helsinki, Finland. http://hdl.handle.net/20.500.12708/94801 ( reposiTUm)
Bleicher, F., Lechner, C., & Kumpf, C. (2017). Vibration Assisted Machining. 10th International Conference on Industrial Tools and Advanced Processing Technologies, Ljubljana, Slovenia. http://hdl.handle.net/20.500.12708/94736 ( reposiTUm)
Bleicher, F. (2017). System of systems for machining by standardized integration. 2017 International Conference on Sustainable Manufacturing, Shanghai, China. http://hdl.handle.net/20.500.12708/94802 ( reposiTUm)
Fritsche, A., & Bleicher, F. (2016). Dynamische Temperatur-Überwachung mittels eines neu konzipierten Messsystems unter Hochleistungsschleifbedingungen. Schweizer Schleif-Symposium 2016, Zürich, Non-EU. http://hdl.handle.net/20.500.12708/94380 ( reposiTUm)
Bleicher, F., & Pollak, C. (2016). Vom Zerspanungslabor zur Pilotfabrik “industrie 4.0.” Imagine 16 Die Zeit der großen Ideen, Innsbruck, Austria. http://hdl.handle.net/20.500.12708/94379 ( reposiTUm)
Bleicher, F. (2016). Pilot factory -the challenge of technology transfer to real economy. Austrian-Korean-Forum, Tech Gate Vienna, Austria. http://hdl.handle.net/20.500.12708/94382 ( reposiTUm)
Raschendorfer, A., & Bleicher, F. (2016). Projektvorstellung “TEC 4.0 - Total Efficiency Control 4.0.” 5. Treffen des Werkueugbau-Stammtisches, Wiener Prater, Austria. http://hdl.handle.net/20.500.12708/94418 ( reposiTUm)
Akhavei, F., & Bleicher, F. (2016). Advanced Manufactury in Einzel- und Kleinserienfertigung. Intertool-Messe 2016, Messe Wien, Austria. http://hdl.handle.net/20.500.12708/94419 ( reposiTUm)
Bleicher, F., & Brier, J. (2016). Schwingungsunterstützte Schleifbearbeitung. Schweizer Schleif-Symposium 2016, Zürich, Non-EU. http://hdl.handle.net/20.500.12708/94433 ( reposiTUm)
Fröhlich, J., & Bleicher, F. (2016). INDUSTRIE 4.0 an der TUW. Bundesländerdialog 2016, BMWFW im Palais Harrach, Austria. http://hdl.handle.net/20.500.12708/94559 ( reposiTUm)
Bleicher, F., & Steininger, A. (2016). Machining of material combinations using internally cooled cutting inserts. MTTRF 2016, San Francisco, Non-EU. http://hdl.handle.net/20.500.12708/94560 ( reposiTUm)
Bleicher, F. (2016). Round Table -AnsysKonferenz. CADFEM, Linz, Austria. http://hdl.handle.net/20.500.12708/94561 ( reposiTUm)
Bleicher, F. (2016). Produktion und Handwerk der Zukunft. ZUKUNFTSKONGRESS 2016, St. Pölten, Austria. http://hdl.handle.net/20.500.12708/94562 ( reposiTUm)
Bleicher, F. (2016). Innovative Fertigungsverfahren - Bausteine für den wirtschaftlichen Erfolg eines Unternehmens. Impulsforum AfA-Mitgliederversammlung, METZLER GmbH & Co KG, Austria. http://hdl.handle.net/20.500.12708/94531 ( reposiTUm)
Bleicher, F. (2016). Pilot Factory 4.0. Vortrag ATOS-VOEST, voestalpine Stahlwelt Linz, Austria, Austria. http://hdl.handle.net/20.500.12708/94543 ( reposiTUm)
Bleicher, F. (2016). Vom Zerspanungslabor zur Pilotfabrik “Industrie 4.0.” OeCG, Seestadt Aspern, Austria. http://hdl.handle.net/20.500.12708/94568 ( reposiTUm)
Bleicher, F. (2016). Innovative Fertigungstechnologien - Bausteine für den wirtschaftlichen Erfolg eines Unternehmens. eDay:16, Wien, Austria. http://hdl.handle.net/20.500.12708/94417 ( reposiTUm)
Bleicher, F., & Obermair, M. (2016). IFT-Institute for Production Engineering and Laser Technology. Institutsvorstellung, VoestAlpine AG, Austria. http://hdl.handle.net/20.500.12708/94474 ( reposiTUm)
Akhavei, F., & Bleicher, F. (2016). Industrie 4.0 - für Einzel- und Kleinserienfertigung. Innovative Fertigungsautomation, ARS-Akademie, Austria. http://hdl.handle.net/20.500.12708/94423 ( reposiTUm)
Akhavei, F., Bleicher, F., & Kreuzer, P. (2016). Effiziente Produktion in Einzel- und Kleinserienfertigung. Workshop - Effiziente Produktion, Kresta-Anlagenbauer G.m.b.H., Austria. http://hdl.handle.net/20.500.12708/94422 ( reposiTUm)
Akhavei, F., & Bleicher, F. (2016). Industrie 4.0 in der Praxis. Industrie 4.0 in der Praxis-Seminar, Knowledge Academy International, Austria. http://hdl.handle.net/20.500.12708/94421 ( reposiTUm)
Bleicher, F., Hunschofsky, H., Hackhofer, M., Pauker, F., & Mauthner, G. (2016). Hoerbiger 1-1-1. Industry of Things World USA, San Diego, Non-EU. http://hdl.handle.net/20.500.12708/94446 ( reposiTUm)
Hacksteiner, M., & Bleicher, F. (2016). Condition Monitoring in der Pilotfabrik Automatische - Bewertungder Energieeffizienzund Produktivitätvon Werkzeugmaschinen. 2. Seminar Energieeffizienz - Intelligente und energieeffiziente Produktion, Messe Wien, Austria. http://hdl.handle.net/20.500.12708/94426 ( reposiTUm)
Ayatollahi, I., & Bleicher, F. (2016). Einsatz von SemanticWeb Technologien in der Industrie 4.0. 2. Seminar Energieeffizienz - Intelligente und energieeffiziente Produktion, Messe Wien, Austria. http://hdl.handle.net/20.500.12708/94427 ( reposiTUm)
Pauker, F., & Bleicher, F. (2016). OPC4Factory-OPC UA Kommunikationfür Fertigungszellen. 2. Seminar Energieeffizienz - Intelligente und energieeffiziente Produktion, Messe Wien, Austria. http://hdl.handle.net/20.500.12708/94430 ( reposiTUm)
Dür, F., & Bleicher, F. (2016). Effizienzsteigerung durch Energiemonitoring. 2. Seminar Energieeffizienz - Intelligente und energieeffiziente Produktion, Messe Wien, Austria. http://hdl.handle.net/20.500.12708/94428 ( reposiTUm)
Mörzinger, B., & Bleicher, F. (2016). Balanced Manufacturing: Datenbasierte - ModellbildungmittelsMachine Learning. 2. Seminar Energieeffizienz - Intelligente und energieeffiziente Produktion, Messe Wien, Austria. http://hdl.handle.net/20.500.12708/94429 ( reposiTUm)
Schulze, V., Bleicher, F., Groche, P., Guo, Y., & Pyune, Y. (2016). Surface Modification by Machine Hammer Peening and Burnishing. 66th General Assemblyof CIRP 2016, Guimaräes, Portugal. http://hdl.handle.net/20.500.12708/94814 ( reposiTUm)
Krall, S., Groza, U., Habersohn, C., & Bleicher, F. (2016). Robot Based Machine Hammer Peening To Generate Defined Surface Structures. 13th High Speed Machining Conference (HSM 2016), Metz, France. http://hdl.handle.net/20.500.12708/94542 ( reposiTUm)
Bleicher, F., & Schörghofer, P. (2016). Intelligente Werkzeug-und Prozesslösungen für eine vernetzte Produktion. METAV 2016, Düsseldorf, Germany. http://hdl.handle.net/20.500.12708/94541 ( reposiTUm)
Bleicher, F., & Schinkowitsch, B. (2016). Pilot & Innovations Fabrik für Industrie 4.0. ProSTEP iViP Symposium 2016, Stuttgart, Germany. http://hdl.handle.net/20.500.12708/94482 ( reposiTUm)
Steiner, F., Bleicher, F., & Vierlinger, R. (2016). Software and design concept for thermoplastic bending process in the application architecture. 33rd Danubia Adria Symposium on Advances in Experimental Mechanics, Portoroz, Slovenia. http://hdl.handle.net/20.500.12708/94437 ( reposiTUm)
Mörzinger, B., & Bleicher, F. (2016). Modeling, Simulation and Optimization of the Operation of Electric Chillers. 6th International Symposium on Energy Challenges and Mechanics, Inverness, United Kingdom of Great Britain and Northern Ireland (the). http://hdl.handle.net/20.500.12708/94439 ( reposiTUm)
Bleicher, F. (2015). Produktion von morgen - Herausforderung variantenreiche Fertigung. IndustryTech 2015, Zell am See, Austria. http://hdl.handle.net/20.500.12708/94236 ( reposiTUm)
Bleicher, F. (2015). Industrie 4.0 in der Kunststoffbranche. KC-Jahrestagung 2015 - Kunststoff - gestern, heute, morgen, Neuhofen/Ybbs, Austria. http://hdl.handle.net/20.500.12708/94237 ( reposiTUm)
Bleicher, F., Lechner, C., Zemann, R., & Sacherl, J. (2015). Investigation of the machining quality in processing FRP. 65th The International Academy for Production Engineering General Assembly, Cape Town, SA, Non-EU. http://hdl.handle.net/20.500.12708/94243 ( reposiTUm)
Bleicher, F. (2015). Sensorik und Aktuatorikim System Werkzeug -Maschine -Prozess. WorkshopreiheFertigungstechnik/Maschinenbau - In-Prozess -Qualitätssicherung in Bearbeitungsmaschinen, Schmalkalden, EU. http://hdl.handle.net/20.500.12708/94241 ( reposiTUm)
Bleicher, F. (2015). Industrie 4.0. TechwomenTalk 2015, Wien, Austria. http://hdl.handle.net/20.500.12708/94242 ( reposiTUm)
Bleicher, F. (2015). Ist eine radikale Prozess-innovation mit Industrie 4.0 möglich? 12. Forum Innovation, Perchtoldsdorf, Austria. http://hdl.handle.net/20.500.12708/94234 ( reposiTUm)
Bleicher, F. (2015). Industrie 4.0 Auf dem Weg zur Produktion von morgen. e-Day 2015, Wien, Austria. http://hdl.handle.net/20.500.12708/94233 ( reposiTUm)
Bleicher, F. (2015). Kottingbrunn. MacroPower Days 2015, Kottingbrunn, Austria. http://hdl.handle.net/20.500.12708/94235 ( reposiTUm)
Bleicher, F. (2015). Co-Simulationsumgebung für die Optimierung der Energieeffizienz von Produktionssystemen. 17. Dresdner Werkzeugmaschinen-Fachseminar “Intelligenz und Vernetzung in der Entwicklung und beim Betrieb von Werkzeugmaschinen,” Dresden, EU. http://hdl.handle.net/20.500.12708/94244 ( reposiTUm)
Bleicher, F. (2015). Industrie 4.0 in Theorie und Praxis. Chefsache Industrie 4.0, Wien, Austria. http://hdl.handle.net/20.500.12708/94246 ( reposiTUm)
Bleicher, F. (2015). Auf dem Weg zu Industrie 4.0. Walter Technologietagung 2015, Linz, Austria. http://hdl.handle.net/20.500.12708/94245 ( reposiTUm)
Bleicher, F. (2015). Energieeffiziente Produktion - Potentiale für die Zukunft. Seminar Energieeffizienz, TU Wien, Austria. http://hdl.handle.net/20.500.12708/94121 ( reposiTUm)
Bleicher, F., Dür, F., & Hacksteiner, M. (2015). Energiemonitoring - Messung, Analyse & Optimierung. Technologie-Workshop “Energieeffizienz - von der Pflicht zur Chance,” Wien, Austria. http://hdl.handle.net/20.500.12708/94158 ( reposiTUm)
Bleicher, F. (2015). From innovation to real product: mi-factory Demonstration and innovation factory at TU Wien. CIRP Winter Meeting 2015, Paris, EU. http://hdl.handle.net/20.500.12708/94208 ( reposiTUm)
Bleicher, F., Habersohn, C., & Fuchs, M. (2015). Vibration Assisted Machining. 15. International Scientific Conference on Production Engineering - Computer Integrated Manufacturing and High Speed Maschining, Vodice, Kroatien, EU. http://hdl.handle.net/20.500.12708/94238 ( reposiTUm)
Bleicher, F. (2015). Energieeffiziente Produktion -Potentiale für die Zukunft. Energieeffiziente Produktion -Potentiale für die Zukunft, Wien, Austria. http://hdl.handle.net/20.500.12708/94239 ( reposiTUm)
Bleicher, F. (2015). Neue Technologien in spanenden Werkzeugmaschinen. ISCAR Technologietagung 2015, Steyr, Austria. http://hdl.handle.net/20.500.12708/94240 ( reposiTUm)
Akhavei, F., & Bleicher, F. (2015). Moderne Fertigungsmethoden - Industrie 4.0. Workshop - Moderne Fertigungsmethoden, Management Center Innsbruck, Austria. http://hdl.handle.net/20.500.12708/94431 ( reposiTUm)
Akhavei, F., Kreuzer, P., & Bleicher, F. (2015). Anlagenbau der Zukunft. Workshop - Anlagenbau der Zukunft, Kresta-Anlagenbauer G.m.b.H., Austria. http://hdl.handle.net/20.500.12708/94432 ( reposiTUm)
Finkeldei, D., & Bleicher, F. (2015). Messsystematik mit rotatorischenKraftmessdynamometern. AfA-Zerspanungsausschuß, Wien Aspern, Austria. http://hdl.handle.net/20.500.12708/94449 ( reposiTUm)
Schmid, S., Obermair, M., & Bleicher, F. (2014). Generative Fertigungstechnologien. Klausur WFL Millturn Technologies, Bad Leonfelden, Austria. http://hdl.handle.net/20.500.12708/91439 ( reposiTUm)
Bleicher, F. (2014). Industrie 4.0, neue Fertigungsverfahren und -maschinen. Technologieforum Mostviertel, Amstetten, Austria. http://hdl.handle.net/20.500.12708/94016 ( reposiTUm)
Bleicher, F. (2014). Mikro-Umformen, Oberflächen-Funktionalisieren. Technologieforum Mostviertel, Amstetten, Austria. http://hdl.handle.net/20.500.12708/94015 ( reposiTUm)
Bleicher, F. (2014). Auf dem Weg zur Produktion von morgen. WKO Roadshow 2014, Neue Trends, Neue Märkte, Neue Wege, Wien, Austria. http://hdl.handle.net/20.500.12708/94025 ( reposiTUm)
Bleicher, F. (2014). Workshop Fibrecut - Institutsvorstellung. 2. Workshop Fibrecut, Wien, Austria. http://hdl.handle.net/20.500.12708/94024 ( reposiTUm)
Bleicher, F. (2014). FTI - Strategie Advanced Manufacturing 4.0. 9. Sitzung des Arbeitskreises “Wettbewerbsfähigkeit der NÖ Industrie,” Wien, Austria. http://hdl.handle.net/20.500.12708/94054 ( reposiTUm)
Bleicher, F. (2014). Aktuelle Trends aus Forschung, Entwicklung, Business. Forum: Virtuelle Inbetriebnahme, Wien, Austria. http://hdl.handle.net/20.500.12708/93974 ( reposiTUm)
Dür, F., Hacksteiner, M., & Bleicher, F. (2014). Energetische Analyse Feinbearbeitung AF 60A Krause Mauser PS Invers3 0390.80. Energetische Evaluierung von Werkzeugmaschinen - VW Werk, Salzgitter, EU. http://hdl.handle.net/20.500.12708/93956 ( reposiTUm)
Bleicher, F., Obermair, M., Dür, F., & Hacksteiner, M. (2014). Balanced Manufacturing. BAMA Konsortialmeeting, Wien, Austria. http://hdl.handle.net/20.500.12708/93971 ( reposiTUm)
Bleicher, F. (2014). Advanced Manufacturing Systems. Impulsvortrag PdZ, Wien, Austria. http://hdl.handle.net/20.500.12708/93984 ( reposiTUm)
Bleicher, F. (2014). Produktion heute: Auf dem Weg zur vierten industriellen Revolution. Fachtagung Schaeffler Austria “Wegweisende Innovationen und Produktionslösungen,” Berndorf, Austria. http://hdl.handle.net/20.500.12708/93898 ( reposiTUm)
Bleicher, F. (2014). Future of Production. Hörbiger Production Conference 2014, Stuttgart, EU. http://hdl.handle.net/20.500.12708/93904 ( reposiTUm)
Bleicher, F., Obermair, M., Dür, F., & Hacksteiner, M. (2014). eco2production - Engergiemanagement in Unternehmen. Umwelttechnik - Tagung 2014, Linz, Austria. http://hdl.handle.net/20.500.12708/93916 ( reposiTUm)
Bleicher, F., Dür, F., Leobner, I., Kovacic, I., Heinzl, B., & Kastner, W. (2014). Co-simulation environment for optimizing energy efficiency in production systems. 64th CIRP General Asembly, Nantes, EU. http://hdl.handle.net/20.500.12708/93926 ( reposiTUm)
Bleicher, F. (2014). Fabrik 4.0 - Herausforderungen und Chancenpotentiale für Unternehmen durch optimierte Prozessketten. Österreichisches Einkaufsforum 2014, Wien, Austria. http://hdl.handle.net/20.500.12708/93924 ( reposiTUm)
Bleicher, F. (2014). Energie und Qualität - Zusammenhänge die man nicht vermutet. Jubiläumsforum Weidmüller 10 Jahre Mitglied im MC, Wiener Neudorf, Austria. http://hdl.handle.net/20.500.12708/93925 ( reposiTUm)
Bleicher, F., Obermair, M., Dür, F., & Leobner, I. (2014). BaMa - Balanced Manufacturing. BaMa - Kickoff Meeting, Wien, Austria. http://hdl.handle.net/20.500.12708/94081 ( reposiTUm)
Bleicher, F., Hienzsch, M., Kühn, T., Obermair, M., & Raschendorfer, A. (2014). TEC_Sustainable Competitiveness through Network Collaboration. Cornet Monitoring Meeting Warschau, Warschau, EU. http://hdl.handle.net/20.500.12708/94082 ( reposiTUm)
Heindl, F., Rodríguez Ripoll, M., Jech, M., Lechner, C., & Bleicher, F. (2014). Tribological Properties of Different Materials treated with Machine Hammer Peening Technology for Incorporation of Hard Particles. 19th International Colloquium Tribology, Stuttgart, Ostfildern, EU. http://hdl.handle.net/20.500.12708/93973 ( reposiTUm)
Rodríguez Ripoll, M., Heindl, F., Jech, M., Lechner, C., Habersohn, C., Bleicher, F., Adjassoho, B., Kozeschnik, E., Gössinger, S., & Bauer, C. (2014). Improving the tribological properties of functional surfaces using machine hammer peening. 19th International Colloquium Tribology, Stuttgart, Ostfildern, EU. http://hdl.handle.net/20.500.12708/93972 ( reposiTUm)
Adjassoho, B., Kozeschnik, E., Lechner, C., Habersohn, C., Bleicher, F., Gössinger, S., Bauer, C., Heindl, F., Rodríguez Ripoll, M., & Tomastik, C. (2013). Controlled surfaces treatment with MAchine Hammer Peening. METAL 2013, Brno, Czechia. http://hdl.handle.net/20.500.12708/93856 ( reposiTUm)
Bleicher, F., Lechner, C., Obermair, M., & Habersohn, C. (2013). Improving the over-all efficiency of mold and dies by functionalizing surfaces. MIT & SLIM 2013 - 12th International Conference on Management of Innovative Technologies, Fiesa, Slowenien, EU. http://hdl.handle.net/20.500.12708/93761 ( reposiTUm)
Bleicher, F. (2013). Energieeffiziente Fertigung. Technologie Workshop des Umweltclusters der Wirtschaftsagentur Wien, Wien, Austria. http://hdl.handle.net/20.500.12708/93605 ( reposiTUm)
Hake, W., Zemann, R., & Bleicher, F. (2013). Personen- und Maschinenschutz bei der Zerspanung von FKV. Workshop FIBRECUT 2013, Wien, Austria. http://hdl.handle.net/20.500.12708/93692 ( reposiTUm)
Zemann, R., & Bleicher, F. (2013). Schwingungsunterstützte Bearbeitung von CFK. Workshop FIBRECUT 2013, Wien, Austria. http://hdl.handle.net/20.500.12708/93693 ( reposiTUm)
Bleicher, F. (2013). Maschinenkonzepte der Zukunft. Laser Tech Day 2013, Pasching, Austria. http://hdl.handle.net/20.500.12708/93771 ( reposiTUm)
Zemann, R., Sacherl, J., & Bleicher, F. (2013). Untersuchung von Werkzeugen für die Zerspanung von FKV - Benchmark 2013. Workshop FIBRECUT 2013, Wien, Austria. http://hdl.handle.net/20.500.12708/93689 ( reposiTUm)
Bleicher, F. (2013). Kühlschmierstoffe: Produktivitäts- oder Kostenfaktor. TIM Praxisforum Zerspanung, Wels, Austria. http://hdl.handle.net/20.500.12708/93772 ( reposiTUm)
Bleicher, F., & Lechner, C. (2013). The use of MHP for modification and functionalization of surfaces. 53. DGM - Fachausschuss Mechanische Oberflächenbehandlung, Rastatt, EU. http://hdl.handle.net/20.500.12708/93738 ( reposiTUm)
Bleicher, F. (2013). Finishing of Weight-optimized Connecting Rods. 13th Powertrain Manufacturing Conference 2013, Darmstadt, EU. http://hdl.handle.net/20.500.12708/93512 ( reposiTUm)
Bleicher, F., Obermair, M., Hienzsch, M., & Kühn, T. (2012). TEC -Total Efficiency Control: Kick-Off Meeting des Steuerungs-Komitees. Kickoff-Meeting des Steuerungs-Komitees, Aachen, EU. http://hdl.handle.net/20.500.12708/94071 ( reposiTUm)
Bleicher, F. (2012). Die Werkzeugmaschine der Zukunft - wandlungsfähig und agil. Forum Maschinenbau 2012, Hagenberg im Mühlkreis, Austria. http://hdl.handle.net/20.500.12708/93449 ( reposiTUm)
Bleicher, F. (2012). Hybridbearbeitung von sprödharten Werkstoffen. Tooling Days 2012, Kapfenberg, Austria. http://hdl.handle.net/20.500.12708/93489 ( reposiTUm)
Bleicher, F. (2012). Maschinenkonzepte. MC-Workshop 2012, Linz, Austria. http://hdl.handle.net/20.500.12708/93484 ( reposiTUm)
Bleicher, F., Mikats, T., Heger, M., Fuchs, M., Ibrishimov, I., & Gaschl, J. (2012). Fertigungssystem Mantis - Voith. Vortrag für die Fa. Voith, Heidenheim, EU. http://hdl.handle.net/20.500.12708/93517 ( reposiTUm)
Bleicher, F., Dür, F., & Flatz, T. (2012). 7th Steering Commitee Meeting - Progress Report User Group Austria. 7th Steering Commitee Meeting, Aachen, EU. http://hdl.handle.net/20.500.12708/93515 ( reposiTUm)
Bleicher, F., Dür, F., & Flatz, T. (2012). 6th Steering Commitee Meeting - Progress Report. 6th Steering Commitee Meeting, Belgien, EU. http://hdl.handle.net/20.500.12708/93514 ( reposiTUm)
Bleicher, F. (2012). Next Technologies: Interaction of Mechatronics in Manufacturing Systems. 23rd International DAAAM Symposium, Zadar, Kroatien, Non-EU. http://hdl.handle.net/20.500.12708/93523 ( reposiTUm)
Bleicher, F., Dür, F., & Flatz, T. (2012). Analyse des Heizenergiebedarfs der Shedhalle bei der Firma Flowserve. Vortrag bei der Firma Flowserve, Brunn/Gebirge, Austria. http://hdl.handle.net/20.500.12708/93503 ( reposiTUm)
Bleicher, F., Flatz, T., Dür, F., & Stark, M. (2012). Analyse der Messung bei Schrenk GmbH. Vortrag bei der Firma Schrenk GmbH, Vitis, Austria. http://hdl.handle.net/20.500.12708/93502 ( reposiTUm)
Bleicher, F., Dür, F., Flatz, T., & Salvatori, C. (2012). Vergleich verschiedener Linearantriebstechnologien. Vortrag - Labor für Produktionstechnik, Wien, Austria. http://hdl.handle.net/20.500.12708/93504 ( reposiTUm)
Bleicher, F., Brandstetter, S., & Dorn, C. (2012). Energie- und Condition Monitoring. Condition Monitoring Forum 2012, Köln, EU. http://hdl.handle.net/20.500.12708/93521 ( reposiTUm)
Kovac, I., & Bleicher, F. (2012). Sustainable Production with Machinery System Integration. 6th-CSM-Forum-Finnland, Tempere, EU. http://hdl.handle.net/20.500.12708/93534 ( reposiTUm)
Bleicher, F. (2012). Produktionstechnisches Innovations- und Applikationszentrum (PIA) in der Seestadt Aspern. Aspern Seestadt - Meet the Pioneers, Wien, Austria. http://hdl.handle.net/20.500.12708/93565 ( reposiTUm)
Bleicher, F. (2012). smart - factory Laboratory for High Tech Manufacturing. Eröffnung des researchTUb Labors, Wien, Aspern, Austria. http://hdl.handle.net/20.500.12708/93316 ( reposiTUm)
Bleicher, F. (2012). Interaktion Maschine - Prozess - Einführung. MC-Workshop 2012, Linz, Austria. http://hdl.handle.net/20.500.12708/93315 ( reposiTUm)
Leobner, I., Reinisch, C., Dür, F., Ponweiser, K., Kastner, W., & Bleicher, F. (2012). INFO-Interdisziplinäre Forschung zur Energieoptimierung in Fertigungsbetrieben. Science Brunch: Integrierte Energiesysteme, Linz, Austria. http://hdl.handle.net/20.500.12708/93377 ( reposiTUm)
Bleicher, F., Dür, F., & Flatz, T. (2012). Analyse der Blockdurchwärmung bei der Firma Worthington. Vortrag bei der Firma Worthington, Kienberg bei Gaming, Austria. http://hdl.handle.net/20.500.12708/93500 ( reposiTUm)
Bleicher, F., Dür, F., & Flatz, T. (2012). Energietische Vermessung der Herbold Rohrmühle - Typ SMR 120/80 H12-3. Vortrag in der Herbold Rohrmühle, Traiskirchen, Austria. http://hdl.handle.net/20.500.12708/93501 ( reposiTUm)
Bleicher, F., Dür, F., & Flatz, T. (2012). ECO2CUT - Ein ganzheitlicher Ansatz zur Energieoptimierung in Fertigungsbetrieben. ECO2CUT - Ein ganzheitlicher Ansatz zur Energieoptimierung in Fertigungsbetrieben, Wien, Austria. http://hdl.handle.net/20.500.12708/93424 ( reposiTUm)
Bleicher, F., Dür, F., & Flatz, T. (2012). Energieeffiziente Werkzeugmaschine. MC-Workshop 2012, Linz, Austria. http://hdl.handle.net/20.500.12708/93425 ( reposiTUm)
Bleicher, F., Brandstetter, S., & Dorn, C. (2012). Energiemonitoring für Zustandsbeurteilung aus Effizienzsicht. Condition Monitoring Forum 2012, Köln, EU. http://hdl.handle.net/20.500.12708/93477 ( reposiTUm)
Bleicher, F., Dür, F., & Flatz, T. (2012). Energie-/Klimaziele - Herausforderung für Wirtschaft und Wissenschaft. MC - Jahrestagung 2012, St. Pölten, Austria. http://hdl.handle.net/20.500.12708/93478 ( reposiTUm)
Bleicher, F., Dür, F., & Dimitriou, A.-A. (2012). Analyse Fa. Hörbiger Ventilwerke. Vortrag bei der Fa. Hörbiger Ventilwerke, Wien, Austria. http://hdl.handle.net/20.500.12708/93507 ( reposiTUm)
Bleicher, F., Dür, F., & Stark, M. (2012). Energy Footprint Großblasanlage BA34.2/69. Vortrag bei der Firma BEKUM Maschinenfabrik Traismauer GesmbH, Traismauer, Austria. http://hdl.handle.net/20.500.12708/93505 ( reposiTUm)
Bleicher, F., Dür, F., & Flatz, T. (2012). Messungen bei ACTech GmbH. Vortrag für die Firma ACTech GmbH, Wien, Austria. http://hdl.handle.net/20.500.12708/93506 ( reposiTUm)
Bleicher, F., & Habersohn, C. (2012). Modellierung und Simulation einer Maschine. MC-Workshop 2012, Linz, Austria. http://hdl.handle.net/20.500.12708/93485 ( reposiTUm)
Weiler, T., & Bleicher, F. (2012). Die Fertigungszelle der Zukunft. MC-Workshop 2012, Linz, Austria. http://hdl.handle.net/20.500.12708/93486 ( reposiTUm)
Bleicher, F., Ponweiser, K., Magyar, T., Orehounig, K., Leobner, I., Dür, F., Flatz, T., Reinisch, C., Heinzl, B., Rößler, M., & Kastner, W. (2012). Interdisziplinäre Forschung zur Energieoptimierung in Fertigungsbetrieben - Ergebnisse 2011/12. Konsortialmeeting 2012, Wien, Austria. http://hdl.handle.net/20.500.12708/93511 ( reposiTUm)
Bleicher, F., Dür, F., & Flatz, T. (2012). 5th User Group Meeting - Progress Report. 5th User Group Meeting, Wien, Austria. http://hdl.handle.net/20.500.12708/93513 ( reposiTUm)
Sihn, W., & Bleicher, F. (2011). Learning factories in operational application Integrated, scalable concept of a learning factory at the Vienna University of Technology. 1st Conference on Learning Factories, Darmstadt, EU. http://hdl.handle.net/20.500.12708/93177 ( reposiTUm)
Bleicher, F. (2011). Zerspanung von keramischen Werkstoffen mit mehrachsiger Schwingungsunterstützung. Moderne Werkstoffe spanend bearbeiten, Dortmund, EU. http://hdl.handle.net/20.500.12708/93232 ( reposiTUm)
Zemann, R., Bleicher, F., & Zisser-Pfeifer, R. (2011). Some practical contributions of the technology of electrochemical micromachining with ultra short pulses. Insect 2011, Wien, Austria. http://hdl.handle.net/20.500.12708/93574 ( reposiTUm)
Bleicher, F. (2011). Allgemeine Trends in der Zerspanung. Roadshow 2011, Klaus, Gnadenwald, Fuschlsee, St. Ulrich bei Steyr, Graz, Vösendorf, St. Pölten, Austria. http://hdl.handle.net/20.500.12708/93279 ( reposiTUm)
Bleicher, F., & Bernreiter, J. (2011). Optimization of Cutting Processes by Multiaxial-Vibration Assisted Machining. 61st CIRP General Assembly, Budapest, EU. http://hdl.handle.net/20.500.12708/93280 ( reposiTUm)
Bleicher, F. (2011). Impulse aus Wirtschaft und Forschung. Intelligente Produktion, Wien, Austria. http://hdl.handle.net/20.500.12708/93278 ( reposiTUm)
Bleicher, F., & Sihn, W. (2011). Integrated, scalable Concept of a Learning Factory. Learning Factories Cooperation for excellence in teaching in the field of production technology, Darmstadt, EU. http://hdl.handle.net/20.500.12708/93282 ( reposiTUm)
Bleicher, F. (2011). Funktionalisieren von Werkzeug-Oberflächen durch die Technologie des Schlagverdichtens. Forum Stanztechnik, Fellbach bei Stuttgart, EU. http://hdl.handle.net/20.500.12708/93283 ( reposiTUm)
Bleicher, F. (2011). Präzisionsbearbeitung im Maschinenbau. ASMET FU-Sitzung Thermisch Spritzen, Schwaz, Austria. http://hdl.handle.net/20.500.12708/93281 ( reposiTUm)
Bleicher, F., Bernreiter, J., Lauwers, B., & Ten Haaf, P. (2011). Investigation of the Tool Life and the Process-Material Interaction in Ultrasonic Assisted Grinding of Si-SiC Ceramic Materials. CIRP-2011 -HybP-1 Collaborative Working Group on Hybrid Processes, Paris, EU. http://hdl.handle.net/20.500.12708/93277 ( reposiTUm)
Bernreiter, J., & Bleicher, F. (2010). Neue Technologie für den Formenbau um Oberflächengüten zu verbessern und die Härte zu erhöhen. Zerspanungstage Judenburg, Judenburg, Austria. http://hdl.handle.net/20.500.12708/93122 ( reposiTUm)
Bleicher, F. (2010). Transferzentrum - Entwicklung und Einsatzmöglichkeiten in der Automobilindustrie. 4. Internationale Walter AG Automobiltage, Tübingen, EU. http://hdl.handle.net/20.500.12708/93128 ( reposiTUm)
Dorn, C., Kovacic, I., Leobner, I., Bleicher, F., Achammer, C., & Ponweiser, K. (2010). Interdisziplinäre Forschung zur Energieoptimierung in Fertigungsbetrieben. sciencebrunch #1: Energieeffizienz in Industrie und Gewerbe, Wien, Austria. http://hdl.handle.net/20.500.12708/93008 ( reposiTUm)
Dorn, C., Bleicher, F., Renger, U., Salvatori, C., Dimitriou, A.-A., & Bernreiter, J. (2010). Energieeffiziente Produktion und Prozessoptimierung. Workshop “Ressourceneffiziente Produktion,” Wien, Austria. http://hdl.handle.net/20.500.12708/93009 ( reposiTUm)
Dorn, C., & Bleicher, F. (2010). Entgraten von Federbeinen - Endpräsentation. Endpräsentation Entgraten von Federbeinen, Wien, Austria. http://hdl.handle.net/20.500.12708/93010 ( reposiTUm)
Bleicher, F., & Kovac, I. (2010). Adaptive manufacturing with machinery system integration. IMT 2010 - Tschechisch - Österreichisches Werkzeugmaschinenkolloquium, Brünn, EU. http://hdl.handle.net/20.500.12708/93018 ( reposiTUm)
Bleicher, F. (2010). Future technologies and new machine tool research activities. IMT 2010 - Tschechisch - Österreichisches Werkzeugmaschinenkolloquium, Brünn, EU. http://hdl.handle.net/20.500.12708/93017 ( reposiTUm)
Bleicher, F. (2010). Klassifizierung rostfreier Werkstoffe in der Industrie für die spanende Bearbeitung. Zerspanungstage Judenburg, Judenburg, Austria. http://hdl.handle.net/20.500.12708/93019 ( reposiTUm)
Bleicher, F. (2010). Innovationen in der Fertigungstechnik. Round Table des Mechatronic Clusters, Linz, Austria. http://hdl.handle.net/20.500.12708/93020 ( reposiTUm)
Bleicher, F., & Bernreiter, J. (2009). Tribological effects of structured and intensified surfaces. AFA - Ausschuss für Arbeitstechnik - Zerspanung, Wien, Austria. http://hdl.handle.net/20.500.12708/92872 ( reposiTUm)
Bleicher, F., Bernreiter, J., & Gröger, T. (2009). US-Actuator - Tests and Results. CORNET Steering Committee Meeting, Leuven, EU. http://hdl.handle.net/20.500.12708/92876 ( reposiTUm)
Gröger, T., Bleicher, F., Bernreiter, J., & Schopf, C. (2009). Ultrasonic assisted grinding of brittle hard materials. CORNET Monitoring Meeting, Frankfurt, EU. http://hdl.handle.net/20.500.12708/92874 ( reposiTUm)
Bernreiter, J., & Bleicher, F. (2009). Hybridbearbeitung. AFA - Ausschuss für Arbeitstechnik - Zerspanung, Wien, Austria. http://hdl.handle.net/20.500.12708/92873 ( reposiTUm)
Geiger, G., & Bleicher, F. (2009). Optische 3D-Geometriemessung an Schneidwerkzeugen mit Infinite Focusam Beispiel von Drehversuchen. AFA - Ausschuss für Arbeitstechnik - Zerspanung, Wien, Austria. http://hdl.handle.net/20.500.12708/92867 ( reposiTUm)
Bleicher, F., Bernreiter, J., Heger, M., Hulak, H., & Gröger, T. (2009). Ultrasonic assisted machining. CORNET Steering Committee Meeting, Leuven, EU. http://hdl.handle.net/20.500.12708/92877 ( reposiTUm)
Bleicher, F., Bernreiter, J., & Gröger, T. (2009). US-Actuator -Practical und theoretical Approach. CORNET Steering Committee Meeting, Leuven, EU. http://hdl.handle.net/20.500.12708/92875 ( reposiTUm)
Bernreiter, J., Bleicher, F., & Gröger, T. (2009). Ultrasonic Assisted Grinding - Projektzwischenbericht. CORNET - User Comittee Meeting, Eibiswald, Austria. http://hdl.handle.net/20.500.12708/92878 ( reposiTUm)
Dorn, C., Bleicher, F., & Stark, M. (2009). Energieoptimierter Einsatz in der Produktion. AFA - Ausschuss für Arbeitstechnik - Zerspanung, Wien, Austria. http://hdl.handle.net/20.500.12708/92854 ( reposiTUm)
Dorn, C., & Bleicher, F. (2009). Trockenbohren von Al-Druckgussteilen. AFA - Ausschuss für Arbeitstechnik - Zerspanung, Wien, Austria. http://hdl.handle.net/20.500.12708/92853 ( reposiTUm)
Berger, D., Geiger, G., & Bleicher, F. (2009). Jahresabschlussbericht 2009 Forschungsgemeinschaft Straßenbahn SP2. Jahresabschlussmeeting Forschungsgemeinschaft Straßenbahn alle SP, Wien, Austria. http://hdl.handle.net/20.500.12708/92856 ( reposiTUm)
Bleicher, F., Bernreiter, J., & Einspieler, C. (2009). Comparison Of Different Measuring Methods For Positioning Of A Recording Device In Large Models. ASMET Austrian Society for Metallurgy and Materials, Leoben, Austria. http://hdl.handle.net/20.500.12708/92805 ( reposiTUm)
Bleicher, F. (2009). Schneidstoffe - Beschichtung - Werkzeuggeometrie: Möglichkeiten der Zerspanungsoptimierung. Schneidstoffe - Technologische Trends, St. Pölten, Austria. http://hdl.handle.net/20.500.12708/92804 ( reposiTUm)
Bleicher, F., Huber, B., Fuchs, K., Einspieler, C., Bernreiter, J., & Krouzecky, N. (2009). Comparison of different measuring methods for positioning of a recording device in large models. 26th Danubia-Adria Symposium on Advances in Experimental Mechanics, Leoben, Österreich, Austria. http://hdl.handle.net/20.500.12708/111333 ( reposiTUm)
Bleicher, F. (2008). Enhancedmachining by sensor and actuator integration. EMO - Hannover, Hannover, EU. http://hdl.handle.net/20.500.12708/94800 ( reposiTUm)
Bleicher, F. (2008). Research on Cutting Technologies at the Institute of Production Engineering, Vienna University of Technology. ISCAR´s International Technical Training Seminar, ISCAR Tefen Industrial Zone, Non-EU. http://hdl.handle.net/20.500.12708/92568 ( reposiTUm)
Bleicher, F., & Bernreiter, J. (2008). HPC Bearbeitung - Leistungssteigerung im ELB-Tieflochbohren. AFA - Ausschuss für Arbeitstechnik - Zerspanung, Wien, Austria. http://hdl.handle.net/20.500.12708/92622 ( reposiTUm)
Bernreiter, J., & Bleicher, F. (2008). Aktuelle Entwicklungen im Projekt “UAG.” CORNET - User Comittee Meeting, Eibiswald, Austria. http://hdl.handle.net/20.500.12708/92623 ( reposiTUm)
Berger, D., & Bleicher, F. (2008). Eco2 - Cut. Ökoprofit Klub - Workshop, Graz, Austria. http://hdl.handle.net/20.500.12708/92639 ( reposiTUm)
Bleicher, F. (2008). Innovationen und Trends in der spanenden Fertigung. Berufungsvortrag, Vienna, Austria, Austria. http://hdl.handle.net/20.500.12708/92658 ( reposiTUm)
Bleicher, F. (2008). Moderne Verfahren in der Produktionstechnik. Landesinnung Wien der Mechatroniker, Wien, Austria. http://hdl.handle.net/20.500.12708/92657 ( reposiTUm)
Bleicher, F., Einspieler, C., Bernreiter, J., Huber, B., & Krouzecky, N. (2008). Development of a measuring system for the analysis of hydraulic models of the size of 50x16 m by the use of numerical control technology. 25th Danubia-Adria Symposium on Advances in Experimental Mechanics, Budweis, Czech Republic, EU. http://hdl.handle.net/20.500.12708/111393 ( reposiTUm)
Bleicher, F., Einspieler, C., Bernreiter, J., Huber, B., & Krouzecky, N. (2008). Development of a measuring system for analysis of hydraulic models in dimensions of 50 x 16m using the technology of numerical control. 25th Danubia-Adria Symposium on Advances in Experimental Mechanics, Budweis, Czech Republic, EU. http://hdl.handle.net/20.500.12708/92530 ( reposiTUm)
Bernreiter, J., & Bleicher, F. (2007). Ultrasonic Assisted Grinding - UAG. Informationsveranstaltung des Kunststoffcluster NÖ, Wirtschaftskammer Eisenstadt, Austria. http://hdl.handle.net/20.500.12708/92529 ( reposiTUm)
Bleicher, F. (2007). Innovation in der Produktionstechnik. Tagung des Vorstands der Industriellenvereinigung, Wien, Austria. http://hdl.handle.net/20.500.12708/92485 ( reposiTUm)
Bernreiter, J., & Bleicher, F. (2007). Zerspanungssimulation mit Abaqus. AFA - Ausschuss für Arbeitstechnik - Zerspanung, Wien, Austria. http://hdl.handle.net/20.500.12708/92421 ( reposiTUm)
Bleicher, F. (2007). Advanced Machining Systems. Manufuture Austria, Wien, Austria. http://hdl.handle.net/20.500.12708/92484 ( reposiTUm)
Bleicher, F. (2007). Versuchsprogramm am LPT. AFA - Ausschuss für Arbeitstechnik - Zerspanung, Wien, Austria. http://hdl.handle.net/20.500.12708/92483 ( reposiTUm)
Bleicher, F. (2007). Reinraumtechnik - Ein Überblick. Reinraumtechniktag 2007, Wien, Austria. http://hdl.handle.net/20.500.12708/92482 ( reposiTUm)
Bleicher, F. (2006). Einfluss des Spanwinkels auf den Zerspanungsprozess. Fohnsdorfer Zerspanungstage, Fohnsdorf, Austria. http://hdl.handle.net/20.500.12708/92258 ( reposiTUm)
Bleicher, F., & Berger, D. (2006). Methoden und Vorgehensweise bei F&E-Kooperationen am LPT. Innovation in der Produktionstechnik, TU Wien, Austria. http://hdl.handle.net/20.500.12708/92257 ( reposiTUm)
Bleicher, F., & Furtner, P. (2006). Reinraumtechnik - Aktuelle Trends. Round Table Reinraumtechnik, Villach, Austria. http://hdl.handle.net/20.500.12708/92256 ( reposiTUm)
Bleicher, F. (2006). Einfluss der Topologie der Wendeschneidplatte. Fohnsdorfer Zerspanungstage, Fohnsdorf, Austria. http://hdl.handle.net/20.500.12708/92259 ( reposiTUm)
Bleicher, F. (2006). Wettbewerbsfaktor Automatisierung. Ausseninstitut-Technologietransfer, TU Wien, Austria. http://hdl.handle.net/20.500.12708/92253 ( reposiTUm)
Bleicher, F. (2006). Einfluss des Spanwinkels auf die Hochgeschwindigkeitsbearbeitung. AFA - Ausschuss für Arbeitstechnik - Zerspanung, Wien, Austria. http://hdl.handle.net/20.500.12708/92254 ( reposiTUm)
Radkowitsch, W., Metzner, K., Bleicher, F., Bernreiter, J., & Einspieler, C. (2006). Gerichtetes Einlippen Tieflochbohren. VDI - Tagung, Dortmund, EU. http://hdl.handle.net/20.500.12708/92659 ( reposiTUm)
Bleicher, F. (2005). Hochdynamische Vorgänge im Zerspanungsprozess. AFA - Ausschuss für Arbeitstechnik - Zerspanung, Wien, Austria. http://hdl.handle.net/20.500.12708/92255 ( reposiTUm)
Einspieler, C., & Bleicher, F. (2004). Messtechnische Analyse von Zerspanungsprozessen. Ausschuss für Arbeitstechnik, Wien, Austria. http://hdl.handle.net/20.500.12708/91858 ( reposiTUm)
Bleicher, F., & Weseslindtner, H. (2004). Fertigungstechnik der Zukunft. AFA - Ausschuss für Arbeitstechnik - Zerspanung, Wien, Austria. http://hdl.handle.net/20.500.12708/91917 ( reposiTUm)
Bleicher, F., & Einspieler, C. (2004). Messtechnische Analyse von Zerspanungsprozessen. AFA - Ausschuss für Arbeitstechnik - Zerspanung, Wien, Austria. http://hdl.handle.net/20.500.12708/91919 ( reposiTUm)
Bleicher, F. (2004). Technologieentwicklung. AFA - Ausschuss für Arbeitstechnik - Zerspanung, Wien, Austria. http://hdl.handle.net/20.500.12708/91918 ( reposiTUm)
Karl, R., & Bleicher, F. (2004). Strahlschneideverfahren Schwerpunkt: Wasserstrahlschneiden. Ausschuss für Arbeitstechnik, Wien, Austria. http://hdl.handle.net/20.500.12708/91859 ( reposiTUm)
Bleicher, F. (2003). Parallelkinematische Werkzeugmaschinen. Buchpräsentation, Graz, Austria. http://hdl.handle.net/20.500.12708/91916 ( reposiTUm)
Bleicher, F. (2001). Entwicklung einer parallelkinematischen Bohr- und Fräseinheit für den flexiblen Einsatz in automatisierten Anlagen. AFA - Ausschuss für Arbeitstechnik - Zerspanung, Wien, Austria. http://hdl.handle.net/20.500.12708/91920 ( reposiTUm)
Bleicher, F. (2001). CFK im modernen Werkzeugmaschinenbau. AFA - Ausschuss für Arbeitstechnik - Zerspanung, Wien, Austria. http://hdl.handle.net/20.500.12708/91921 ( reposiTUm)
Bleicher, F. (2001). A machine tool application based on parallel kinematics in comparison with serial concepts. RAAD - 10th International Workshop on Robotics in Alpe-Adria-Danube Region, Wien, Austria. http://hdl.handle.net/20.500.12708/91590 ( reposiTUm)
Bleicher, F. (2000). Dezentrale Steuerungslösungen im Sondermaschinenbau. Branchentag Automation, Vösendorf, Austria. http://hdl.handle.net/20.500.12708/91922 ( reposiTUm)

Berichte

Ramsauer, C. M., Greitler, J.-A., Baumann, C., Habersohn, C., & Bleicher, F. (2024). Autonomous process control enabled by smart tool holder and digital interfacing. ( reposiTUm)
Baumann, C., Maier, S., & Bleicher, F. (2024). Friction coefficient appropriate for simulation of cutting processes. ( reposiTUm)
Ramsauer, C. M., Greitler, J.-A., Krause, M. W., Habersohn, C., Baumann, C., & Bleicher, F. (2024). Development and experimental testing of a novel method to sense cutting force in shell mill cutters : MTTRF - Report: NHX6300 from 2021 - 2023. http://hdl.handle.net/20.500.12708/196626 ( reposiTUm)
Brier, J., Baumann, C., & Bleicher, F. (2024). Development of a Long-Stroke Vibration-assisted Actuator. ( reposiTUm)
Baumann, C., Prießnitz, M., Maier, S., Krall, S., Habersohn, C., & Bleicher, F. (2024). Investigation of two MHP process methods and new Actuator design. ( reposiTUm)
Bleicher, F., Saric, Z., & Ertelthalner-Nikolaev, D. (2024). FORTE 2ARMY II Additive Fertigung – Potenziale für die Wehrtechnik. ( reposiTUm)
Bleicher, F., Bodur, O., Einspieler, C., & Sezer, U. (2023). Innovationsscheck - 896287. ( reposiTUm)
Singer, F., Pickel, L., Pöchgraber, G., & Bleicher, F. (2023). Konzept: Automatisiertes Auslesen geprägter Serialnummern auf Schmiedeteilen mittels industrieller Bildverarbeitung (Deep Learning). ( reposiTUm)
Singer, F., Pickel, L., Pöchgraber, G., & Bleicher, F. (2023). Projektantrag - Automatisierte optische Verschleißmessung zur Reduktion von Betriebsmitteln in der zerspanenden Industrie. ( reposiTUm)
Nikolaev, D., Saric, Z., Schmid, T., Lechner, C., Gössinger, S., Wiesinger, G., Mauthner, G., & Bleicher, F. (2023). 2ARMY Automated Additive Repair and Manufacturing System Ergebnisbericht Kurzfassung. http://hdl.handle.net/20.500.12708/191675 ( reposiTUm)
Singer, F., Pickel, L., Pöchgraber, G., & Bleicher, F. (2023). Konzept: Machbarkeitsstudie und Konzepterstellung einer roboterbasierten Qualitätskontrolle von Schmiedeteilen aus der Luft- und Raumfahrtindustrie. ( reposiTUm)
Singer, F., Pickel, L., Pöchgraber, G., & Bleicher, F. (2023). Konzept: In-Line Verbau eines optischen Messsystems zur dynamischen Qualitätsbewertung von Stahldraht nach dem Walzprozess. ( reposiTUm)
Singer, F., Pickel, L., Pöchgraber, G., & Bleicher, F. (2023). Projekt-Konzept: Machbarkeitsstudie zur Heißvermessung von Schmiedeteilen für die Luft- und Raumfahrtindustrie. ( reposiTUm)
Nikolaev, D., Saric, Z., Schmid, T., Lechner, C., Gössinger, S., Wiesinger, G., Mauthner, G., & Bleicher, F. (2023). 2ARMY Automated Additive Repair and Manufacturing System Short project report. http://hdl.handle.net/20.500.12708/191676 ( reposiTUm)
Bodur, O., Sulz, C., Bleicher, F., Einspieler, C., & Ugur Sezer. (2022). Innovationsscheck - 891075 - Konstruktion der AR - Laserschutzbrille  (HoloLase). http://hdl.handle.net/20.500.12708/158317 ( reposiTUm)
Bleicher, F., Pfefferkorn, F., Schmitz, T., Krall, S., Baumann, C., Ramsauer, C. M., & Leitner, D. (2021). Zwischenbericht FFG Projekt OMAHA-Project (ACAMS) (No. 2). http://hdl.handle.net/20.500.12708/40408 ( reposiTUm)
Bleicher, F., Pfefferkorn, F., Schmitz, T., Krall, S., Baumann, C., Ramsauer, C. M., & Leitner, D. (2021). Zwischenbericht Stiftungsprofessur: OMAHA-Project (ACAMS). http://hdl.handle.net/20.500.12708/154411 ( reposiTUm)
Bleicher, F., Pfefferkorn, F., Schmitz, T., Krall, S., & Baumann, C. (2020). Zwischenbericht FFG Projekt OMAHA-Project (ACAMS) (No. 1). http://hdl.handle.net/20.500.12708/40410 ( reposiTUm)
Zemann, R., Bleicher, F., Hufschmied, R. R., Frank, A., Hausammann, M., & Scheitle, J.-P. (2017). Beurteilung der Bauteilqualität nach der trennenden Bearbeitung von faserverstärkten Kunststoffen (DIN SPEC 25713). http://hdl.handle.net/20.500.12708/39376 ( reposiTUm)
Akhavei, F., & Bleicher, F. (2016). Projektendbericht - Lean Factory 07. http://hdl.handle.net/20.500.12708/39047 ( reposiTUm)
Bohaty, G., & Bleicher, F. (2016). Umbaumöglichkeiten Walzen. http://hdl.handle.net/20.500.12708/39029 ( reposiTUm)
Bohaty, G., & Bleicher, F. (2016). Bypassversuche. http://hdl.handle.net/20.500.12708/39030 ( reposiTUm)
Bohaty, G., & Bleicher, F. (2016). Manuelles Schröpfen. http://hdl.handle.net/20.500.12708/39031 ( reposiTUm)
Walter, H., Scharinger-Urschitz, G., Brier, J., Haider, M., Mertz, R., & Bleicher, F. (2015). Fertigungstechnologie für ein Bimetall - Längsrippenrohr für die Anwendung in Latentwärmespeichern. http://hdl.handle.net/20.500.12708/38478 ( reposiTUm)
Bleicher, F., & Wiesinger, G. (2015). Verlaufen der Schnittfuge-Aktive Verlaufskompensation. http://hdl.handle.net/20.500.12708/38963 ( reposiTUm)
Akhavei, F., & Bleicher, F. (2015). Handbuch - Lean Factory 07. http://hdl.handle.net/20.500.12708/38951 ( reposiTUm)
Bohaty, G., & Bleicher, F. (2015). Technologierecherche für das partielle Auftragen von Lack auf strukturierte ABS Grundkörper. http://hdl.handle.net/20.500.12708/38932 ( reposiTUm)
Wiesinger, G., Krall, S., Habersohn, C., Klingenbrunner, M., Barth, C., & Bleicher, F. (2014). Zwischenmeeting 2014: PremiumKerf. http://hdl.handle.net/20.500.12708/38116 ( reposiTUm)
Wiesinger, G., Krall, S., Klingenbrunner, M., Pollak, C., Fürbacher, R., & Bleicher, F. (2014). Jahresbericht 2014: Projektstatus_PremiumKerf. http://hdl.handle.net/20.500.12708/38115 ( reposiTUm)
Wiesinger, G., Krall, S., & Bleicher, F. (2014). Zwischenbericht 2014: Bisherige Ergebnisse Premium Kerf. http://hdl.handle.net/20.500.12708/38114 ( reposiTUm)
Wiesinger, G., Brier, J., Klingenbrunner, M., & Bleicher, F. (2014). Zwischenbericht - November 2014 PremiumKerf. http://hdl.handle.net/20.500.12708/38179 ( reposiTUm)
Akhavei, F., & Bleicher, F. (2014). Analysebericht - Lean Factory 07. http://hdl.handle.net/20.500.12708/38950 ( reposiTUm)
Wiesinger, G., Krall, S., & Bleicher, F. (2013). Bericht_Kickoff Meeting_PremiumKerf: Basisprogramme Competence Headquarter. http://hdl.handle.net/20.500.12708/38113 ( reposiTUm)
Wiesinger, G., Krall, S., & Bleicher, F. (2013). Endbericht 2013_NFVP Trans. http://hdl.handle.net/20.500.12708/37773 ( reposiTUm)
Wiesinger, G., Krall, S., & Bleicher, F. (2013). Präsentation zur Endbesprechung_NFVP Trans. http://hdl.handle.net/20.500.12708/37774 ( reposiTUm)
Bleicher, F., Lechner, C., Habersohn, C., Gössinger, S., Bauer, C., Kozeschnik, E., Adjassoho, B., Rodríguez Ripoll, M., Heindl, F., & Jech, M. (2013). Tribological effects of structured and densified surfaces (No. 1). http://hdl.handle.net/20.500.12708/38079 ( reposiTUm)
Bleicher, F., & Steiner, F. (2012). Endbericht - CC: Forschungs- und Entwicklungsvertrag und Angebot für eine Machbarkeitsstudie zur Produkt- und Fertigungsentwicklung einer Schutz- und Stützkonstruktion im Zuge einer FFG-Förderung. http://hdl.handle.net/20.500.12708/38486 ( reposiTUm)
Bleicher, F., Fuchs, M., & Mikats, T. (2012). WFL - Vibrationsdrehen - Fortschrittsbericht. http://hdl.handle.net/20.500.12708/37574 ( reposiTUm)
Bleicher, F., & Steiner, F. (2012). Pflichtenheft: Analgenautomatisierung für Clever Cast- und I Contur. http://hdl.handle.net/20.500.12708/38459 ( reposiTUm)
Steiner, F., & Bleicher, F. (2012). Machbarkeitsstudie zur Produktion- und Fertigugsentwicklung einer Schutz- und Stützkonstruktion. http://hdl.handle.net/20.500.12708/38463 ( reposiTUm)
Berger, D., Bleicher, F., Ereke, I., & Radey, P. (2011). Abschlusspräsentation Forschungsgemeinschaft Straßenbahn SP2. http://hdl.handle.net/20.500.12708/37211 ( reposiTUm)
Berger, D., Geiger, G., Ereke, I., & Bleicher, F. (2011). Projektabschlussbericht 2008-2011. http://hdl.handle.net/20.500.12708/37212 ( reposiTUm)
Berger, D., Wiesinger, G., & Bleicher, F. (2011). Jahresbericht 2011 NFVP-Trans. http://hdl.handle.net/20.500.12708/37214 ( reposiTUm)
Berger, D., Wiesinger, G., Steiner, F., & Bleicher, F. (2011). Jahrespräsentation Projekt NFVP-Trans. http://hdl.handle.net/20.500.12708/37213 ( reposiTUm)
Bleicher, F., Bernreiter, J., Gröger, T., Heger, M., & Hulak, H. (2010). Ultrasonic Assisted Grinding -UAG - UC-Projektendbericht. http://hdl.handle.net/20.500.12708/36182 ( reposiTUm)
Bleicher, F., Puschitz, F., & Habersohn, C. (2010). Fertigungsmaschine für Harfensiebe aus Polyurethanummantelten-Drähten (No. 1). http://hdl.handle.net/20.500.12708/36495 ( reposiTUm)
Bleicher, F., Geiger, G., & Habersohn, C. (2010). Messungen an SEMA Abwälzfräsmaschine (No. 1). http://hdl.handle.net/20.500.12708/36496 ( reposiTUm)
Bleicher, F., & Habersohn, C. (2010). Oberflächenuntersuchung: Vergleich: Prägen und Texturwalzen. http://hdl.handle.net/20.500.12708/36497 ( reposiTUm)
Bleicher, F., Bernreiter, J., & Gröger, T. (2010). Cornet UAG - Final Technical Report. http://hdl.handle.net/20.500.12708/36488 ( reposiTUm)
Bleicher, F., Bernreiter, J., & Gröger, T. (2010). UAG - FFG Endbericht. http://hdl.handle.net/20.500.12708/36489 ( reposiTUm)
Dorn, C., Stark, M., Bleicher, F., Bernreiter, J., Salvatori, C., & Dimitriou, A.-A. (2010). Energetische Untersuchung von Werkzeugmaschinen Firma EMCO. http://hdl.handle.net/20.500.12708/36480 ( reposiTUm)
Puschitz, F., & Bleicher, F. (2010). Qualitätssicherung Wareneingang (No. 1). http://hdl.handle.net/20.500.12708/36502 ( reposiTUm)
Puschitz, F., & Bleicher, F. (2010). Kleben von Tränenblechen. http://hdl.handle.net/20.500.12708/36517 ( reposiTUm)
Bleicher, F., Bernreiter, J., Einspieler, C., & Habersohn, C. (2009). Konzepte zum gesteuerten BTA-Bohren. http://hdl.handle.net/20.500.12708/36132 ( reposiTUm)
Bleicher, F., Bernreiter, J., & Einspieler, C. (2009). Bericht zu laufenden Projekten. http://hdl.handle.net/20.500.12708/36133 ( reposiTUm)
Bleicher, F., Bernreiter, J., Heger, M., & Hulak, H. (2009). PKD-Fräsen - Analyse der Spanbildung. http://hdl.handle.net/20.500.12708/36482 ( reposiTUm)
Bleicher, F., & Habersohn, C. (2009). Folienschweißungen. http://hdl.handle.net/20.500.12708/36483 ( reposiTUm)
Bleicher, F., & Habersohn, C. (2009). Folienschweißungen. http://hdl.handle.net/20.500.12708/36484 ( reposiTUm)
Bleicher, F., Dorn, C., & Habersohn, C. (2009). Langlochfräsen in großer Tiefe. http://hdl.handle.net/20.500.12708/36490 ( reposiTUm)
Dorn, C., Berger, D., Bleicher, F., & Bernreiter, J. (2009). Eco2Cut Ecological and Economical Machining. http://hdl.handle.net/20.500.12708/35734 ( reposiTUm)
Dorn, C., Berger, D., Zisser-Pfeifer, R., & Bleicher, F. (2009). Interdisziplinäre Forschung zur Energieoptimierung in Fertigungsbetrieben. http://hdl.handle.net/20.500.12708/35776 ( reposiTUm)
Dorn, C., & Bleicher, F. (2009). OPTASENS Combination and evaluation of different sensors and measuring methods for the precision form-measurement on optical surfaces. http://hdl.handle.net/20.500.12708/35778 ( reposiTUm)
Dorn, C., Berger, D., & Bleicher, F. (2009). Entwicklung von Naturfaserverbundplatten mit integrierten Befestigungs- und Spannelementen für Böden von Transportern. http://hdl.handle.net/20.500.12708/35777 ( reposiTUm)
Berger, D., Geiger, G., & Bleicher, F. (2009). Erstbemusterung Plasmapunktschweißen für Einsatz im Schienenfahrzeugbau. http://hdl.handle.net/20.500.12708/35783 ( reposiTUm)
Berger, D., Geiger, G., & Bleicher, F. (2009). Erstbemusterung CMT-Löten für Einsatz im Schienenfahrzeugbau. http://hdl.handle.net/20.500.12708/35782 ( reposiTUm)
Berger, D., Geiger, G., Ereke, I., & Bleicher, F. (2009). Bericht MIG-Löten dynamische Zugversuche im Zeitfestigkeitsbereich. http://hdl.handle.net/20.500.12708/35786 ( reposiTUm)
Berger, D., Geiger, G., Bleicher, F., & Mieth, S. (2009). Prüfspezifikation MIG-Löten für Einsatz im Schienenfahrzeugbau. http://hdl.handle.net/20.500.12708/35784 ( reposiTUm)
Berger, D., Geiger, G., Ereke, I., & Bleicher, F. (2009). Bericht Plasmapunktschweißen statische Zugversuche. http://hdl.handle.net/20.500.12708/35785 ( reposiTUm)
Berger, D., Geiger, G., & Bleicher, F. (2009). Jahresabschlussbericht 2009 Forschungsgemeinschaft Straßenbahn SP2. http://hdl.handle.net/20.500.12708/35787 ( reposiTUm)
Geiger, G., Dorn, C., & Bleicher, F. (2009). Anlage zum automatisierten Entgraten - Präsentation Konzept. http://hdl.handle.net/20.500.12708/35779 ( reposiTUm)
Dorn, C., Bleicher, F., Haunschmid, E., & Dellinger, B. (2009). Trockenbearbeitungsversuche - Beschichtungen. http://hdl.handle.net/20.500.12708/35780 ( reposiTUm)
Dorn, C., Bleicher, F., & Haunschmid, E. (2009). Trockenbearbeitungsversuche - Werkzeuggeometrie. http://hdl.handle.net/20.500.12708/35781 ( reposiTUm)
Bleicher, F., & Habersohn, C. (2009). Folienschweißen, Ermittlung optimaler Parameter (Erstinformation). http://hdl.handle.net/20.500.12708/35799 ( reposiTUm)
Bleicher, F., & Habersohn, C. (2009). Folienschweißen, Ermittlung optimaler Parameter (Zwischenbericht). http://hdl.handle.net/20.500.12708/35800 ( reposiTUm)
Bleicher, F., & Habersohn, C. (2009). Folienschweißen, Ermittlung optimaler Parameter (Projektzusammenfassung). http://hdl.handle.net/20.500.12708/35802 ( reposiTUm)
Bleicher, F., & Habersohn, C. (2009). Folienschweißen, Ermittlung optimaler Parameter (Endbericht). http://hdl.handle.net/20.500.12708/35801 ( reposiTUm)
Bleicher, F., & Habersohn, C. (2009). Schwachstellenanalyse Ultraschallschweißprozess (Zwischenbericht). http://hdl.handle.net/20.500.12708/35803 ( reposiTUm)
Bleicher, F., & Habersohn, C. (2009). Schwachstellenanalyse Ultraschallschweißprozess (Endbericht). http://hdl.handle.net/20.500.12708/35804 ( reposiTUm)
Bleicher, F., & Habersohn, C. (2009). Schwachstellenanalyse Ultraschallschweißprozess (Projektzusammenfassung). http://hdl.handle.net/20.500.12708/35805 ( reposiTUm)
Bleicher, F., & Habersohn, C. (2009). Vermessung Musterteil Valve Cap. http://hdl.handle.net/20.500.12708/35806 ( reposiTUm)
Bleicher, F., & Habersohn, C. (2009). Sonderspannsatz Schleifspindel, Auslegung technische Daten. http://hdl.handle.net/20.500.12708/35807 ( reposiTUm)
Bleicher, F., & Habersohn, C. (2009). Einspannkraftmessgerät für Spezialspannsatz. http://hdl.handle.net/20.500.12708/35808 ( reposiTUm)
Bleicher, F., & Habersohn, C. (2009). Entwicklung eines Luftlagersystems. http://hdl.handle.net/20.500.12708/35809 ( reposiTUm)
Geiger, G., & Bleicher, F. (2009). Rohrverbindungsprüfung. http://hdl.handle.net/20.500.12708/35878 ( reposiTUm)
Geiger, G., Berger, D., Alpay, T., & Bleicher, F. (2009). Produktionssimulation. http://hdl.handle.net/20.500.12708/35886 ( reposiTUm)
Bernreiter, J., Bleicher, F., & Dorn, C. (2008). Einlippentieflochbohren in Formenbaustählen. http://hdl.handle.net/20.500.12708/34959 ( reposiTUm)
Bleicher, F., & Dorn, C. (2008). Increase in efficiency of value added chain of production of a levelling valve. http://hdl.handle.net/20.500.12708/34901 ( reposiTUm)
Bleicher, F., Geiger, G., & Berger, D. (2008). Flecitiy New Generation - Technologieansätze. http://hdl.handle.net/20.500.12708/34899 ( reposiTUm)
Bleicher, F., Bernreiter, J., Puschitz, F., & Dorn, C. (2008). Determination of Cutting Forces. http://hdl.handle.net/20.500.12708/34918 ( reposiTUm)
Bleicher, F., & Bernreiter, J. (2008). Schnittversuche mit VHM-Schaftfräser. http://hdl.handle.net/20.500.12708/34919 ( reposiTUm)
Bleicher, F., & Bernreiter, J. (2008). Ultrasonic Assisted Grinding - Simulation of US-Vibration. http://hdl.handle.net/20.500.12708/34912 ( reposiTUm)
Bleicher, F., & Bernreiter, J. (2008). Development of test equipment. http://hdl.handle.net/20.500.12708/34913 ( reposiTUm)
Bleicher, F., & Bernreiter, J. (2008). Ultrasonic Assisted Grinding - Metrology of US-Vibration. http://hdl.handle.net/20.500.12708/34910 ( reposiTUm)
Bleicher, F., & Bernreiter, J. (2008). Messen der US-Schwingungen. http://hdl.handle.net/20.500.12708/34911 ( reposiTUm)
Bleicher, F., & Berger, D. (2008). Temperaturmessverfahren und Manipulation der Temperaturverteilung - Testauswertung (No. 1). http://hdl.handle.net/20.500.12708/35141 ( reposiTUm)
Bleicher, F., Geiger, G., & Berger, D. (2008). Testprogramm für MIG-LÖT Verbindungen (No. 1). http://hdl.handle.net/20.500.12708/35140 ( reposiTUm)
Bleicher, F., Dorn, C., & Puschitz, F. (2008). Zwischenbericht zu HPM - High Performance Cutting (No. 1). http://hdl.handle.net/20.500.12708/35147 ( reposiTUm)
Bleicher, F., Dorn, C., & Bohaty, G. (2008). Entgraten von Federbeinen - Entwicklung von Entgratwerkzeugen (No. 1). http://hdl.handle.net/20.500.12708/35150 ( reposiTUm)
Bleicher, F., Dorn, C., & Puschitz, F. (2008). Endbericht zu HPM - High Performance Cutting (No. 2). http://hdl.handle.net/20.500.12708/35148 ( reposiTUm)
Bleicher, F., & Dorn, C. (2008). Trockenbearbeitung (No. 1). http://hdl.handle.net/20.500.12708/35149 ( reposiTUm)
Bleicher, F., Zisser-Pfeifer, R., & Dorn, C. (2008). Entgraten von Federbeinen - Entwicklung von Entgratwerkzeugen (No. 2). http://hdl.handle.net/20.500.12708/35151 ( reposiTUm)
Bleicher, F., Bernreiter, J., Einspieler, C., & Dorn, C. (2008). Einsatz eines Servoventils beim gesteuerten Einlippentieflochbohren (No. 1). http://hdl.handle.net/20.500.12708/35065 ( reposiTUm)
Bleicher, F., & Bernreiter, J. (2008). Ultrasonic Assisted Grinding - Aktuelle Entwicklungen. http://hdl.handle.net/20.500.12708/35064 ( reposiTUm)
Puschitz, F., & Bleicher, F. (2008). Klebstoffe für die Wimpernverlängerung (No. 1). http://hdl.handle.net/20.500.12708/35114 ( reposiTUm)
Bleicher, F., & Habersohn, C. (2008). Entwicklung einer Spindel mittels Luftlagerung zum Hochgeschwindigkeitsschleifen (No. 1). http://hdl.handle.net/20.500.12708/35155 ( reposiTUm)
Herzig, N., Bleicher, F., Meyer, L. W., & Halle, T. (2008). Zusammenhänge zwischen werkstoffbedingten Skalierungseffekten und der spezifischen Schnittkraft. http://hdl.handle.net/20.500.12708/36492 ( reposiTUm)
Einspieler, C., & Bleicher, F. (2008). Messungen an Heid Drehzentrum CT9. http://hdl.handle.net/20.500.12708/36491 ( reposiTUm)
Bleicher, F., & Einspieler, C. (2008). Messbericht zu Heid Zentralspindeldrehzentrum CT9. http://hdl.handle.net/20.500.12708/35199 ( reposiTUm)
Bleicher, F., & Einspieler, C. (2008). Messbericht zu Nomotec Bearbeitungsmaschine. http://hdl.handle.net/20.500.12708/35200 ( reposiTUm)
Bleicher, F., & Habersohn, C. (2008). Epoxidharz-Gussversuche. http://hdl.handle.net/20.500.12708/35192 ( reposiTUm)
Bleicher, F., & Habersohn, C. (2008). Entwicklung eines Werkzeugspannsatzes für die Hochgeschwindigkeitsbearbeitung. http://hdl.handle.net/20.500.12708/35202 ( reposiTUm)
Bleicher, F., & Furtner, P. (2008). Clean room in ESO Headquarters Building. http://hdl.handle.net/20.500.12708/35203 ( reposiTUm)
Bleicher, F. (2008). Pflichtenheft für die Enwicklung einer Luftlagerung. http://hdl.handle.net/20.500.12708/35201 ( reposiTUm)
Bleicher, F., & Einspieler, C. (2008). Messbericht zu Fill Robmill 6400 V2. http://hdl.handle.net/20.500.12708/35194 ( reposiTUm)
Bleicher, F. (2008). Manufuture-JTI - Beurteilung der nationalen Bedeutung einer möglichen Joint Technology Initiative (JTI) im Bereich Produktionstechnologien. http://hdl.handle.net/20.500.12708/35205 ( reposiTUm)
Bleicher, F. (2008). Prüfung von Innengewinden. http://hdl.handle.net/20.500.12708/35195 ( reposiTUm)
Puschitz, F., & Bleicher, F. (2008). Eingleisung einer simulationsgestützten Steuerung einer Fertigungslinie für Kohlebürsten (No. 1). http://hdl.handle.net/20.500.12708/34924 ( reposiTUm)
Bernreiter, J., & Bleicher, F. (2008). Zwischenbericht zu Ultrasonic Assisted Grinding. http://hdl.handle.net/20.500.12708/34949 ( reposiTUm)
Bleicher, F., & Bernreiter, J. (2007). FEM-Simulation Inversbearbeitungsmaschine. http://hdl.handle.net/20.500.12708/34917 ( reposiTUm)
Bleicher, F., Bernreiter, J., & Einspieler, C. (2007). Deep hole drilling. http://hdl.handle.net/20.500.12708/34914 ( reposiTUm)
Bleicher, F. (2007). Strömungssimulation Inversbearbeitungsmaschine. http://hdl.handle.net/20.500.12708/34916 ( reposiTUm)
Bleicher, F. (2007). Basic tests: Effect of cutting insert topology (face angle). http://hdl.handle.net/20.500.12708/34895 ( reposiTUm)
Bleicher, F., & Dorn, C. (2007). Spanende Bearbeitung von G1.4848. http://hdl.handle.net/20.500.12708/34898 ( reposiTUm)
Bleicher, F., & Bernreiter, J. (2007). Simulation of Cutting process. http://hdl.handle.net/20.500.12708/34896 ( reposiTUm)
Schönbaumsfeld, U., Bleicher, F., & Berger, D. (2007). IMS Innovations-Management-System (3320.0055/07). http://hdl.handle.net/20.500.12708/34909 ( reposiTUm)
Bleicher, F., & Berger, D. (2007). Temperaturmessverfahren und Manipulation der Temperaturverteilung - Strömungsvisualisierung (No. 1). http://hdl.handle.net/20.500.12708/35142 ( reposiTUm)
Bleicher, F., & Einspieler, C. (2007). Messbericht zu Robomill-Bearbeitungsmaschine. http://hdl.handle.net/20.500.12708/35193 ( reposiTUm)
Bleicher, F., & Geiger, G. (2007). Analyse der Ventilsitzbearbeitung des Audi V6 3,2l Motors. http://hdl.handle.net/20.500.12708/35204 ( reposiTUm)
Bleicher, F. (2007). Entwicklung von Luftlagersystemen. http://hdl.handle.net/20.500.12708/35189 ( reposiTUm)
Bleicher, F. (2007). Gutachten zu Bearbeitungszentrum Hedelius RS 100 KL/50. http://hdl.handle.net/20.500.12708/35197 ( reposiTUm)
Puschitz, F., Bleicher, F., Caudr, H., Zisser-Pfeifer, R., Dorn, C., & Palatin, T. (2007). Mikrochipgesteuerter Piezo-Tintenstrahlkopf (No. 1). http://hdl.handle.net/20.500.12708/34926 ( reposiTUm)
Bleicher, F., & Berger, D. (2006). TRIZ-Methode: Theorie zur Lösung erfinderischer Probleme. http://hdl.handle.net/20.500.12708/34897 ( reposiTUm)
Bleicher, F., Bernreiter, J., & Einspieler, C. (2006). Applikation zur Volumenbestimmung von E1-Gewichtsstücken (No. 1). http://hdl.handle.net/20.500.12708/35562 ( reposiTUm)
Puschitz, F., Bleicher, F., & Dorn, C. (2006). CAM-Benchmark (No. 1). http://hdl.handle.net/20.500.12708/34925 ( reposiTUm)
Puschitz, F., & Bleicher, F. (2005). Projekt Speed Flex (No. 1). http://hdl.handle.net/20.500.12708/34927 ( reposiTUm)
Bleicher, F. (2005). Optimierung eines Bondingprozesses. http://hdl.handle.net/20.500.12708/35198 ( reposiTUm)
Fischer, M., & Bleicher, F. (2005). Durchlaufzeitoptimierung beim Drahtziehen. http://hdl.handle.net/20.500.12708/35191 ( reposiTUm)
Bleicher, F. (2005). Privatgutachten zur Offenlegungsschrift DE 40 33 541 A1. http://hdl.handle.net/20.500.12708/35196 ( reposiTUm)
Bleicher, F., & Bernreiter, J. (2005). Konzept für ein Innengeometrie Messsystem (No. 1). http://hdl.handle.net/20.500.12708/35232 ( reposiTUm)
Bleicher, F., & Bernreiter, J. (2005). Fundamentauslegung für CMM LS (No. 1). http://hdl.handle.net/20.500.12708/35230 ( reposiTUm)
Bleicher, F. (2004). Bohrungsfeinstbearbeitung (806184 / M). http://hdl.handle.net/20.500.12708/34907 ( reposiTUm)
Bleicher, F., & Bernreiter, J. (2004). Genauigkeit von Lasertracker-Systemen (No. 1). http://hdl.handle.net/20.500.12708/35231 ( reposiTUm)
Bleicher, F., & Bernreiter, J. (2004). Simulation zur Lagerung von Schwerstangen (No. 1). http://hdl.handle.net/20.500.12708/35233 ( reposiTUm)
Bleicher, F., & Bernreiter, J. (2002). Gun Drilling. http://hdl.handle.net/20.500.12708/34905 ( reposiTUm)
Bleicher, F. (2001). Optimierung von HSC-Spindel-Dichtsystemen (802995 / 6611 K/Sa). http://hdl.handle.net/20.500.12708/34904 ( reposiTUm)
Bleicher, F., & Grünberger, H. (2000). Steifigkeitsuntersuchungen von CFK-Stäben mit Stahlflansch. http://hdl.handle.net/20.500.12708/34900 ( reposiTUm)
Bleicher, F. (2000). Stabkinematik. http://hdl.handle.net/20.500.12708/34903 ( reposiTUm)
Weseslindtner, H., & Bleicher, F. (2000). Rollenmontageautomat. http://hdl.handle.net/20.500.12708/35190 ( reposiTUm)
Bleicher, F. (1999). Entwicklung der Verbindungstechnik zur Herstellung von Industriesieben für die Aufbereitungsindustrie. http://hdl.handle.net/20.500.12708/34902 ( reposiTUm)
Bleicher, F., & Weseslindtner, H. (1999). Analysis of Machine Support Systems. http://hdl.handle.net/20.500.12708/34908 ( reposiTUm)
Bleicher, F., Janner, C., & Mader, T. (1999). Endbericht zu Maschinenvermessung der Versuchsstation Quickstep. http://hdl.handle.net/20.500.12708/34915 ( reposiTUm)
Bleicher, F. (1998). Stabkinematik - Bewegungsgleichungen. http://hdl.handle.net/20.500.12708/34906 ( reposiTUm)

Multimedia & Design

Sulz, C., & Bleicher, F. (2021). Drei DigiTalk | Smart Factory - Herausforderungen, Möglichkeiten, Chancen. [Video]. TU Wien - IFT. ( reposiTUm)

Spezialbeiträge

Akhavei, F., Bleicher, F., & Pöchgraber, G. (2017, May 22). Studie der TU Wien: Jedem zweiten Unternehmen fehlt Digitalisierungsstrategie. Computerwelt, 1(120820), 1. http://hdl.handle.net/20.500.12708/146562 ( reposiTUm)
Bleicher, F., & Bernreiter, J. (2010). Hybridbearbeitung von keramischen Werkstoffen. MC-Report, 2, 9. http://hdl.handle.net/20.500.12708/167212 ( reposiTUm)

Hochschulschriften

Bleicher, F. (2001). Entwicklung einer parallelkinematischen Bohr- und Fräseinheit für den flexiblen Einsatz in automatisierten Anlagen [Professorial Dissertation, Technische Universität Wien]. reposiTUm. http://hdl.handle.net/20.500.12708/186022 ( reposiTUm)