Bugelnig, K., Sket, F., Germann, H., Steffens, T., Koos, R., Wilde, F., Boller, E., & Requena, G. (2018). Influence of 3D connectivity of rigid phases on damage evolution during tensile deformation of an AlSi12Cu4Ni2 piston alloy. Materials Science and Engineering: A, 709, 193–202. https://doi.org/10.1016/j.msea.2017.10.035 ( reposiTUm)

Barriobero Vila, P., Biancardi Oliveira, V., Schwarz, S., Buslaps, T., & Requena, G. C. (2017). Tracking the αʺ martensite decomposition during continuous heating of a Ti-6Al-6V-2Sn alloy. Acta Materialia, 135, 132–143. https://doi.org/10.1016/j.actamat.2017.06.018 ( reposiTUm)

Bugelnig, K., Sket, F., Germann, H., Steffens, T., Wilde, F., Boller, E., & Requena, G. (2016). 3D microstructure and damage accumulation in a cast AlSi12Cu5Ni2 piston alloy as a function of solution treatment. E-Journal of NDT, ICT 2016(18783), 8. http://hdl.handle.net/20.500.12708/150123 ( reposiTUm)

Barriobero Vila, P., Requena, G., Buslaps, T., Alfeld, M., & Boesenberg, U. (2015). Role of element partitioning on the α-β phase transformation kinetics of a bi-modal Ti-6Al-6V-2Sn alloy during continuous heating. Journal of Alloys and Compounds, 626, 330–339. https://doi.org/10.1016/j.jallcom.2014.11.176 ( reposiTUm)

Barriobero Vila, P., Requena, G., Schwarz, S., Warchomicka, F., & Buslaps, T. (2015). Influence of phase transformation kinetics on the formation of α in a β-quenched Ti-5Al-5Mo-5V-3Cr-1Zr alloy. Acta Materialia, 95, 90–101. https://doi.org/10.1016/j.actamat.2015.05.008 ( reposiTUm)

Barriobero Vila, P., Requena, G., Warchomicka, F., Stark, A., Schell, N., & Buslaps, T. (2015). Phase transformation kinetics during continuous heating of a β-quenched Ti-10V-2Fe-3Al alloy. Journal of Materials Science, 50(3), 1412–1426. https://doi.org/10.1007/s10853-014-8701-6 ( reposiTUm)

Asghar, Z., Requena, G., Zahid, G. H., & Rafi-Ud-Din, R. (2014). Effect of thermally stable Cu- and Mg-rich aluminides on the high temperature strength of an AlSi12CuMgNi alloy. Materials Characterization, 88, 80–85. https://doi.org/10.1016/j.matchar.2013.12.004 ( reposiTUm)

Requena, G., Maire, E., Leguen, C., & Thuillier, S. (2014). Separation of nucleation and growth of voids during tensile deformation of a dual phase steel using synchrotron microtomography. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 589, 242–251. https://doi.org/10.1016/j.msea.2013.09.084 ( reposiTUm)

Asghar, Z., & Requena, G. (2014). Three dimensional post-mortem study of damage after compression of cast Al-Si alloys. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 591, 136–143. https://doi.org/10.1016/j.msea.2013.10.067 ( reposiTUm)

Troufflard, J., Requena, G., Thuillier, S., & Maire, É. (2013). Ductile damage in tension and bending for DP980 steel sheets. Key Engineering Materials, 554–557, 110–117. https://doi.org/10.4028/www.scientific.net/kem.554-557.110 ( reposiTUm)

Crespo Casanova, J., Requena, G., Degischer, H.-P., Track, K., & Tolnai, D. (2013). Three-dimensional characterisation of micropores and graphite nodules in ductile cast iron. International Foundry Research, 65(3), 24–30. http://hdl.handle.net/20.500.12708/156218 ( reposiTUm)

Tolnai, D., Szakács, G., Requena, G., Stark, A., Schell, N., Kainer, K. U., & Hort, N. (2013). Study of the solidification of AS alloys combining in situ synchrotron diffraction and differential scanning calorimetry. Materials Science Forum, 765, 286–290. https://doi.org/10.4028/www.scientific.net/msf.765.286 ( reposiTUm)

Schöbel, M., Großeiber, S., Jonke, J., Wimpory, R., Ilie, S., & Requena, G. (2013). Residual Stresses in Continuously Cast Steel Slabs. BHM Berg- Und Hüttenmännische Monatshefte, 158(11), 475–476. https://doi.org/10.1007/s00501-013-0210-4 ( reposiTUm)

Tolnai, D., Requena, G., Cloetens, P., Lendvai, J., & Degischer, H. P. (2013). Effect of solution heat treatment on the internal architecture and compressive strength of an AlMg4.7Si8 alloy. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 585, 480–487. https://doi.org/10.1016/j.msea.2013.06.033 ( reposiTUm)

Tolnai, D., Townsend, P., Requena, G., Salvo, L., Lendvai, J., & Degischer, H. P. (2012). In situ synchrotron tomographic investigation of the solidification of an AlMg4.7Si8 alloy. Acta Materialia, 60(6–7), 2568–2577. https://doi.org/10.1016/j.actamat.2012.01.024 ( reposiTUm)

Tolnai, D., Requena, G., Cloetens, P., Lendvai, J., & Degischer, H. P. (2012). Sub-micrometre holotomographic characterisation of the effects of solution heat treatment on an AlMg7.3Si3.5 alloy. Materials Science and Engineering: A, 550, 214–221. https://doi.org/10.1016/j.msea.2012.04.060 ( reposiTUm)

Requena, G., & Degischer, H.-P. (2012). Three-Dimensional Architecture of Engineering Multiphase Metals. Annual Review of Materials Research, 42, 151–161. http://hdl.handle.net/20.500.12708/164701 ( reposiTUm)

Kastner, J., Plank, B., & Requena, G. (2012). Non-destructive characterisation of polymers and Al-alloys by polychromatic cone-beam phase contrast tomography. Materials Characterization, 64, 79–87. https://doi.org/10.1016/j.matchar.2011.12.004 ( reposiTUm)

Kurumlu, D., Payton, E. J., Young, M. L., Schöbel, M., Requena, G., & Eggeler, G. (2012). High-temperature strength and damage evolution in short fiber reinforced aluminum alloys studied by miniature creep testing and synchrotron microtomography. Acta Materialia, 60(1), 67–78. https://doi.org/10.1016/j.actamat.2011.09.022 ( reposiTUm)

Requena, G., Canelo Yubero, D., Corrochano, J., Repper, J., & Garcés, G. (2012). Stress relaxation during thermal cycling of particle reinforced aluminium matrix composites. Composites Part A: Applied Science and Manufacturing, 43(11), 1981–1988. https://doi.org/10.1016/j.compositesa.2012.07.004 ( reposiTUm)

Liu, Y., Meirer, F., Wang, J., Requena, G., Williams, P., Nelson, J., Mehta, A., Andrews, J. C., & Pianetta, P. (2012). 3D elemental sensitive imaging using transmission X-ray microscopy. Analytical and Bioanalytical Chemistry, 404(5), 1297–1301. https://doi.org/10.1007/s00216-012-5818-9 ( reposiTUm)

Requena, G., Garces, G., Asghar, Z., Marks, E. D., Staron, P., & Cloetens, P. (2011). The effect of the connectivity of rigid phases on strength of Al-Si alloys. Advanced Engineering Materials, 13(8), 674–684. http://hdl.handle.net/20.500.12708/162295 ( reposiTUm)

Marks, E. D., Requena, G., Degischer, H.-P., & Boller, E. (2011). Microtomography and creep modeling of a short fiber reinforced aluminum piston alloy. Advanced Engineering Materials, 13(3), 199–207. http://hdl.handle.net/20.500.12708/163027 ( reposiTUm)

Requena, G., Bauer, B., Degischer, H. P., & Lieblich, M. (2011). The effect of ball milling and wet blending on the creep behaviour of a particle reinforced 2124 Al-alloy. International Journal of Materials Research, 102(8), 982–992. https://doi.org/10.3139/146.110553 ( reposiTUm)

Asghar, Z., Requena, G., & Boller, E. (2011). Three-dimensional rigid multiphase networks providing high-temperature strength to cast AlSi10Cu5Ni1-2 piston alloys. Acta Materialia, 59(16), 6420–6432. https://doi.org/10.1016/j.actamat.2011.07.006 ( reposiTUm)

Kastner, J., Harrer, B., Requena, G., & Brunke, O. (2010). A comparative study of high resolution cone beam X-ray tomography and synchrotron tomography applied to Fe- and Al-alloys. NDT and E International: Independent Nondestructive Testing and Evaluation, 43(7), 599–605. https://doi.org/10.1016/j.ndteint.2010.06.004 ( reposiTUm)

Requena, G. (2010). Sub-micrometer holotomography of multiphase metals. ESRF Highlights, 1, 112–114. http://hdl.handle.net/20.500.12708/167751 ( reposiTUm)

Asghar, Z., Requena, G., & Kubel, F. (2010). The role of Ni and Fe aluminides on the elevated temperature strength of an AlSi12 alloys. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 527(21–22), 5691–5698. https://doi.org/10.1016/j.msea.2010.05.033 ( reposiTUm)

Poletti, C., Requena, G., Tolnai, D., Cloetens, P., & Steiger-Thirsfeld, A. (2010). Characterization of the microstructure and damage mechanisms in a Ti6Al4V alloy modified with 1 wt.% B. Journal of Materials Research, 101(9), 1151–1157. https://doi.org/10.3139/146.110387 ( reposiTUm)

Asghar, Z., Requena, G., & Boller, E. (2010). 3D Interpenetrating Hybrid Network of Rigid Phases in an AlSi10Cu5NiFe Piston Alloy. Praktische Metallographie, 47(9), 471–486. https://doi.org/10.3139/147.110092 ( reposiTUm)

Requena, G., Garcés, G., Rodríguez, M., Pirling, T., & Cloetens, P. (2009). 3D Architecture and Load Partition in Eutectic Al-Si Alloys. Advanced Engineering Materials, 11(12), 1007–1014. https://doi.org/10.1002/adem.200900218 ( reposiTUm)

Requena, G., Cloetens, P., Altendorfer, W., Poletti, C., Tolnai, D., Warchomicka, F., & Degischer, H. P. (2009). Sub-micrometer synchrotron tomography of multiphase metals using Kirkpatrick-Baez optics. Scripta Materialia, 61(7), 760–763. https://doi.org/10.1016/j.scriptamat.2009.06.025 ( reposiTUm)

Requena, G., Garcés, G., Danko, S., Pirling, T., & Boller, E. (2009). The effect of eutectic Si on the strength of short fibre reinforced Al. Acta Materialia, 57(11), 3199–3210. https://doi.org/10.1016/j.actamat.2009.03.030 ( reposiTUm)

Balog, M., Simancik, F., Bajana, O., & Requena, G. (2009). ECAP vs. direct extrusion-Techniques for consolidation of ultra-fine Al particles. Materials Science and Engineering: A, 504(1–2), 1–7. https://doi.org/10.1016/j.msea.2008.12.014 ( reposiTUm)

Asghar, Z., Requena, G., Degischer, H. P., & Cloetens, P. (2009). Three-dimensional study of Ni aluminides in an AlSi12 alloy by means of light optical and synchrotron microtomography. Acta Materialia, 57(14), 4125–4132. https://doi.org/10.1016/j.actamat.2009.05.010 ( reposiTUm)

Requena, G., Fiedler, G., Seiser, B., Degischer, P., Di Michiel, M., & Buslaps, T. (2009). 3D-Quantification of the distribution of continuous fibres in unidirectionally reinforced composites. Composites Part A: Applied Science and Manufacturing, 40(2), 152–163. https://doi.org/10.1016/j.compositesa.2008.10.014 ( reposiTUm)

Schöbel, M., Requena, G., Degischer, H.-P., Kaminski, H., Buslaps, T., & Di Michiel, M. (2008). Residual stresses and void kinetics in AlSiC MMCs during thermal cycling. Materials Science Forum, 571–572, 413–418. http://hdl.handle.net/20.500.12708/170637 ( reposiTUm)

Lasagni, F. A., Requena, G. C., & Soppa, E. A. (2008). In Situ Measurements of Local Strain in Heterogeneous Materials. Advanced Engineering Materials, 10(1–2), 73–78. https://doi.org/10.1002/adem.200700250 ( reposiTUm)

Nam, T. H., Requena, G., & Degischer, P. (2008). Thermal expansion behaviour of aluminum matrix composites with densely packed SiC particles. Composites Part A: Applied Science and Manufacturing, 39(5), 856–865. https://doi.org/10.1016/j.compositesa.2008.01.011 ( reposiTUm)

Nam, T. H., Requena, G., & Degischer, H.-P. (2008). Modelling and Numerical Computation of Thermal Expansion of Aluminium Matrix Composite with Densely Packed SiC Particles. Technische Mechanik, 28(Heft 3-4), 259–267. http://hdl.handle.net/20.500.12708/170465 ( reposiTUm)

Balog, M., Nagy, J., Simancik, F., Izdinsky, K., & Requena, G. (2008). HEAT RESISTANT ULTRA-FINE GRAINED Al PROFILES. Reviews on Advanced Materials Science, 18, 415–421. http://hdl.handle.net/20.500.12708/171299 ( reposiTUm)

Requena, G. C., Degischer, P., Marks, E. D., & Boller, E. (2008). Microtomographic study of the evolution of microstructure during creep of an AlSi12CuMgNi alloy reinforced with Al2O3 short fibres. Materials Science and Engineering: A, 487(1–2), 99–107. https://doi.org/10.1016/j.msea.2007.10.016 ( reposiTUm)

Requena, G. C., Degischer, H. P., Marks, E. D., & Boller, E. (2007). Entwicklung der Konnektivität der Phasen in einer kurzfaserverstärkten Aluminium-Kolbenlegierung unter Kriechbelastung. Materials Science & Engineering Technology, 38(11), 885–893. https://doi.org/10.1002/mawe.200700179 ( reposiTUm)

Schöbel, M., Requena, G., Degischer, H. P., Kaminski, H., Buslaps, T., & di Michiel, M. (2007). Thermische Ausdehnung, innere Spannungen und Porenverteilung in AlSiCp Metallmatrixverbundwerkstoffe. Materials Science & Engineering Technology, 38(11), 927–933. https://doi.org/10.1002/mawe.200700200 ( reposiTUm)

Requena, G., & Degischer, H. P. (2006). Creep behavior of unreinforced and short fibre reinforced AlSi12CuMgNi piston alloy. Materials Science and Engineering: A, 420(1–2), 265–275. https://doi.org/10.1016/j.msea.2006.01.024 ( reposiTUm)

Requena, G., & Degischer, H.-P. (2005). Effects of particle reinforcement on creep behaviour of AlSi1MgCu. International Journal of Materials Research, 96(7), 805–811. https://doi.org/10.1515/ijmr-2005-0140 ( reposiTUm)

Oliber, E. A., Benavidez, E. R., Requena, G. C., Fiscina, J. E., & González Oliver, C. J. R. (2003). High temperature reactions, densification and the peritectic decomposition of YBa2-xSrxCu3O 7-δ (YBSCO) superconducting ceramics. PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS, 384(3), 247–257. https://doi.org/10.1016/s0921-4534(02)01963-9 ( reposiTUm)

Zemann, R., Sacherl, J., Hake, W., & Bleicher, F. (2015). Tool Life Experimente and Vibration Assistance in Regard to the Machining of CFRP. In C. Edtmaier & G. Requena (Eds.), 20th Symposium on Composites (pp. 707–708). Trans Tech Publicationa. http://hdl.handle.net/20.500.12708/67455 ( reposiTUm)

Zemann, R. (2015). Practical Results to the Long Term Behavior of Fibre Reinforced Polymers under Constant Load. In C. Edtmaier & G. Requena (Eds.), 20th Symposium on Composites (pp. 952–959). Trans Tech Publicationa. http://hdl.handle.net/20.500.12708/67456 ( reposiTUm)

Archodoulaki, V. M., Merola, M., Kastanis, D., Koch, T., & Carlone, P. (2015). Influence of the Impregnation Velocity on Impregnation Quality and Mechanical Properties of Vacuum Assisted Resin Transfer Moulding (VARTM) Materials. In C. Edtmaier & G. Requena (Eds.), 20th Symposium on Composites (pp. 36–43). Materials Science Forum. https://doi.org/10.4028/www.scientific.net/msf.825-826.36 ( reposiTUm)

Pfaffinger, M., Mitteramskogler, G., Gmeiner, R., & Stampfl, J. (2015). Thermal Debinding of Ceramic-Filled Photopolymers. In C. Edtmaier & G. Requena (Eds.), 20th Symposium on Composites (pp. 75–81). Materials Science Forum. https://doi.org/10.4028/www.scientific.net/msf.825-826.75 ( reposiTUm)

Großeiber, S., Gusenbauer, C., Ilie, S., Kozeschnik, E., & Requena, G. (2014). Damage initiation during hot deformation of a continuously cast steel. In Proceedings of Conference on Industrial Computed Tomography (iCT 2014)) (pp. 139–140). http://hdl.handle.net/20.500.12708/67178 ( reposiTUm)

Großeiber, S., Gusenbauer, C., Ilie, S., Requena, G. C., & Kozeschnik, E. (2014). Relevance of Hot Ductility Tests to Crack Sensitivity during Continuous Casting of Steel. In Advanced Materials Research (pp. 201–206). Advanced Materials Research. https://doi.org/10.4028/www.scientific.net/amr.922.201 ( reposiTUm)

Tireira, A., Requena, G., Klocker, H., & Borbély, A. (2013). 3d Study Of Crack Propagation During Tensile Test In Alsi12 Cast Alloy Reinforced With Complex Shape Of Intermetallics. In International conference on full-field measurement techniques and their applications in experimental solid mechanics. PhotoMechanics 2013, Montpellier, France, EU. http://hdl.handle.net/20.500.12708/66957 ( reposiTUm)

Silva, E., Batista, L., Callegari, B., Ferrinho, V., Buzolin, R., Coelho, R., Warchomicka, F., Requena, G., Ramirez, A., & Pinto, H. (2013). Microstructure and Residual Stress Formation during Friction-Stir Welding of Semi-Solid Cast ZK60-RE Magnesium Alloy. In THERMEC 2013. THERMEC 2013, Las Vegas, United States of America (the). http://hdl.handle.net/20.500.12708/66959 ( reposiTUm)

Silva, E., Batista, L., Callegari, B., Feierabend, I., Buzolin, R., Coelho, R., Warchomicka, F., Requena, G., & Pinto, H. (2013). Casting in the Semi-Solid State of ZK60 Magnesium Alloy Modified with Rare Earth Addition. In THERMEC 2013. THERMEC 2013, Las Vegas, United States of America (the). http://hdl.handle.net/20.500.12708/66958 ( reposiTUm)

Barriobero Vila, P., Warchomicka, F., Requena, G., & Buslaps, T. (2012). Phase transformation kinetics in a near-β titanium alloy. In P. Barriobero Vila (Ed.), HI TEMP 2012 Conference Proceedings. http://hdl.handle.net/20.500.12708/66733 ( reposiTUm)

Großeiber, S., Requena, G., Kozeschnik, E., Gusenbauer, C., & Ilie, S. (2012). Correlation Between Hot Ductility and Damage in Microalloyed Steel Slabs. In Proceedings of Conference on Industrial Computed Tomography (iCT 2012). iCT 2012 Wels, Wels, Austria. http://hdl.handle.net/20.500.12708/66659 ( reposiTUm)

Barriobero Vila, P., Warchomicka, F., Requena, G., Stark, A., Schell, N., Buslaps, T., & Stockinger, M. (2012). Influence of the initial microstructure on the phase transformation of Ti-10V-2Fe-3Al. In P. Barriobero Vila (Ed.), European XFEL/HASYLAB User’s Meeting 2012 (p. 15). http://hdl.handle.net/20.500.12708/66732 ( reposiTUm)

Rodríguez-Hortalá, M., Requena, G., Sket, F., Molina-Aldareguia, J., Maire, E., Salvo, L., & Scheel, M. (2011). In-situ synchrotron microtomography during tensile deformation of a multidirectional carbon fibre reinforced epoxy laminate. In 3D Microstructure Meeting 2011 (pp. 14–15). MatInfo Werkstoffinformationsgesellschaft mbH. http://hdl.handle.net/20.500.12708/66406 ( reposiTUm)

Tolnai, D., Townsend, P., Requena, G., Salvo, L., Lendvai, J., & Degischer, H.-P. (2011). In situ tomographic investigation of the solidification of AlMgSi alloys. In 3D Microstructure Meeting 2011 (pp. 78–79). MatInfo Werkstoffinformationsgesellschaft mbH. http://hdl.handle.net/20.500.12708/66489 ( reposiTUm)

Canelo Yubero, D., Requena, G., Degischer, H.-P., & Buslaps, T. (2011). In situ study of internal stresses during thermal cycling of particle and short fibre reinforced aluminium alloys. In 18. Symposium Verbundwerkstoffe und Werkstoffverbunde in Chemnitz 2011 (pp. 26–32). Eigenverlag, Chemnitz. http://hdl.handle.net/20.500.12708/66415 ( reposiTUm)

Canelo Yubero, D., Requena, G., Poletti, C., Warchomicka, F., & Degischer, H.-P. (2011). Load partition and microstructural evolution during hot deformation of Ti-alloys. In European Congress on Advanced Materials and Processes (p. 1). http://hdl.handle.net/20.500.12708/66416 ( reposiTUm)

Requena, G., Cloetens, P., Altendorfer, W., Poletti, C., Tolnai, D., Warchomicka, F., & Degischer, H.-P. (2010). Sub-micrometer holotomography of multiphase metals. In Science with X-ray Nano-beams (p. 34). -. http://hdl.handle.net/20.500.12708/66220 ( reposiTUm)

Asghar, Z., Requena, G., Degischer, H.-P., & Boller, E. (2010). Influence of internal architectures of cast AlSi10Cu5Ni1-2 on high temperature strength. In ICAA 12 (pp. 1285–1290). http://hdl.handle.net/20.500.12708/66224 ( reposiTUm)

Asghar, Z., Requena, G., & Degischer, H.-P. (2010). Improving the thermomechanical properties of cast Al-Si alloys by the addition of Ni and Fe aluminides. In Junior Scientist Conference JSC 2010 (pp. 189–190). http://hdl.handle.net/20.500.12708/66225 ( reposiTUm)

Rodríguez-Hortalá, M., Requena, G., Seiser, B., Degischer, H.-P., Di Michiel, M., & Buslaps, T. (2009). 3D-Characterization of continoues reinforced composites. In 17th International Conference on Composite Materials (pp. 1–9). http://hdl.handle.net/20.500.12708/66009 ( reposiTUm)

Bauer, B., & Requena, G. (2009). Creep Resistance depending on Particle Reinforcement Size of Al-Alloys produced by Powder Metallurgy. In International Conference on Powder Metallurgy and Particualte materials (pp. 1–13). http://hdl.handle.net/20.500.12708/66002 ( reposiTUm)

Falahati, A., Requena, G., Lasagni, F., Mohammadian, H. R., & Degischer, H.-P. (2008). Precipitation kinetics of Si in Al-Si alloys revealed by dilatometry. In Aluminium Alloys (pp. 732–738). Wiley-Vch Gmbh. http://hdl.handle.net/20.500.12708/65831 ( reposiTUm)

Bauer, B., Requena, G., & Lieblich, M. (2008). Enhancement of Creep Resistance of Al-Alloys by Particle Reinforcement. In Aluminium Alloys (pp. 2251–2256). Wiley-VCH. http://hdl.handle.net/20.500.12708/65867 ( reposiTUm)

Requena, G., Degischer, H.-P., Marks, E. D., & Boller, E. (2007). Evolution of the 3D Microstructure of a short fibre reinforced Al-Si alloy during creep. In Proceedings of the 16th International Conference on Composite Materials (pp. 1–10). http://hdl.handle.net/20.500.12708/65628 ( reposiTUm)

Marks, E. D., Requena, G., Degischer, H.-P., Buslaps, T., Di Michiel, M., & Staron, P. (2007). International stresses in a short fiber reinforced Al-Si alloy during thermal cycling and after long isothermal creep. In MECA SENS IV - Conference on stress evaluation on materials by neutron or synchrotron radiation (Abstracts) (p. 45). http://hdl.handle.net/20.500.12708/65639 ( reposiTUm)

Degischer, H.-P., Lasagni, F., Schöbel, M., Huber, T., Aly, M. A., & Requena, G. (2007). Thermal Expansion of Aluminum and Magnesium Matrix Composites. In Proceedings of the 16th International Conference on Composite Materials (pp. 1–2). http://hdl.handle.net/20.500.12708/65622 ( reposiTUm)

Lasagni, F., Requena, G., & Soppa, E. (2007). Local Deformation in Multiphase Materials during Tensile Tests. In Proceedings, AES - ATEMA 2007 (pp. 387–395). http://hdl.handle.net/20.500.12708/65707 ( reposiTUm)

Nam, T. H., Requena, G., & Degischer, H.-P. (2007). Numerical Modeling of Thermal Expansion of Al-Based Metal Matrix composites reinforced with SiC particles. In Proc. EUROSIM 2007 (pp. 1–8). http://hdl.handle.net/20.500.12708/65662 ( reposiTUm)

Nam, T. H., Requena, G., & Degischer, H.-P. (2007). Modelling and numerical computation of thermal expansion of aluminium matrix composite with densely packed SiC particles. In Proceedings of the International Conf. on Material Theory on Nonlinear Dynamics (pp. 1–9). http://hdl.handle.net/20.500.12708/65661 ( reposiTUm)

Neubauer, E., Smid, I., Requena, G., Degischer, H.-P., & Angerer, P. (2006). Thermophysical Properties of Copper Composites Reinforced with Negative CTE fillers. In Advances in powder metallurgy & particulate materials. Proceedings of the 2006 International Conference On Powder Metallurgy & Particulate Materials (pp. 9-37-9–43). Metal Powder Industries Federation (MPIF). http://hdl.handle.net/20.500.12708/65624 ( reposiTUm)

Lasagni, F., Requena, G., Degischer, H.-P., & Papakyriacou, M. (2005). Influence of Al2O3 short fibres and Si on the hardness of heat treated cast Al alloys. In M. Schlimmer (Ed.), Verbundwerkstoffe und Werkstoffverbunde (pp. 57–62). http://hdl.handle.net/20.500.12708/65289 ( reposiTUm)

Lasagni, F., Requena, G., Degischer, H.-P., Mingler, B., & Papakyriacou, M. (2005). Precipitation and Spheroidization of Si in AlSi Alloys and AlSi7/Al2O3/20s. In http://www.dgm.de/past/2005/euromat2005/programme/index.htm (p. 1). http://hdl.handle.net/20.500.12708/65315 ( reposiTUm)

Requena, G., Mutafov, V., & Degischer, H.-P. (2005). Creep behaviour of unreinforced and SiC particle reinforced Al4Cu alloys. In http://www.dgm.de/past/2005/euromat2005/programme/index.htm (p. 1). http://hdl.handle.net/20.500.12708/65299 ( reposiTUm)

Requena, G., Garces, G., Fernández, R., & Schöbel, M. (2012). Determination of Internal Stresses in Lightweight Metal Matrix Composites. In Neutron Diffraction (pp. 257–286). InTech. http://hdl.handle.net/20.500.12708/27814 ( reposiTUm)

Borbély, A., Cloetens, P., Maire, E., & Requena, G. C. (2011). Submicron tomography using high energy synchrotron radiation. In A. Lasagni & F. Lasagni (Eds.), Fabrication and Characterization in the Micro-Nano Range (Vol. 10, pp. 151–170). Springer-Verlag. https://doi.org/10.1007/978-3-642-17782-8_7 ( reposiTUm)

Bugelnig, K., Germann, H., Steffens, T., Wilde, F., Boller, E., & Requena, G. (2017). Damage mechanisms and evolution during thermomechanical fatigue of cast near eutectic Al-Si piston alloys. EUROMAT 2017, THESSALONIKI, Greece. http://hdl.handle.net/20.500.12708/94760 ( reposiTUm)

Wiehoff, P., Radlwimmer, H., Ilie, S., Requena, G., & Kozeschnik, E. (2017). The Influence of Temperature Oscillations on Hot-Ductility of Continuously Cast Micro-Alloyed Steel. EUROMAT 2017, THESSALONIKI, Greece. http://hdl.handle.net/20.500.12708/94821 ( reposiTUm)

Wiehoff, P., Radlwimmer, H., Ilie, S., Requena, G., & Kozeschnik, E. (2017). The Influence of Cyclic Cooling on the Hot-Ductility of Continuously Cast Micro-Alloyed Steel. Metallkunde Kolloquium Lech Arlberg, Lech, Austria. http://hdl.handle.net/20.500.12708/94822 ( reposiTUm)

Koos, R., Requena, G., & Boller, E. (2013). Correlation between the internal architecture and the thermo-mechanical behaviour of near-eutectic and hypereutectic Al-Si alloys. EUROMAT 2013, Sevilla, EU. http://hdl.handle.net/20.500.12708/93774 ( reposiTUm)

Koos, R., Requena, G., & Boller, E. (2013). Thermo-mechanical behaviour and internal architecture of near-eutectic and hypereutectic Al-Si alloys. LightMAT 2013, Bremen, EU. http://hdl.handle.net/20.500.12708/93773 ( reposiTUm)

Koos, R., & Requena, G. (2013). X-ray CT for microstructure characterization of light metals. Industrial CT Scanning, München, EU. http://hdl.handle.net/20.500.12708/93775 ( reposiTUm)

Fernández Gutiérrez, R., Requena, G., Stauder, B., Maire, E., & Isaac, A. (2013). 3D-CHARACTERIZATION OF AlCu4.5Mg0.3 AND AlCu7 ALLOYS. Symposium: “Research at European Neutron and Synchrotron facilities by Austrian researchers,” Wien, Austria. http://hdl.handle.net/20.500.12708/93707 ( reposiTUm)

Canelo Yubero, D., Poletti, C., Warchomicka, F., & Requena, G. (2013). Load partitioning and microstructural evolution in Ti-alloys during hot tensile tests. Symposium: “Research at European Neutron and Synchrotron facilities by Austrian researchers,” Wien, Austria. http://hdl.handle.net/20.500.12708/93735 ( reposiTUm)

Kastner, J., Baumgartner, S., Plank, B., Harrer, B., Gusenbauer, C., Requena, G., & Garces, G. (2013). Microstructure characterization of thermomechanically treated Al- and Mg-alloys by high resolution X-ray computed tomography. EUROMAT 2013, Sevilla, Spain. http://hdl.handle.net/20.500.12708/93760 ( reposiTUm)

Schöbel, M., Großeiber, S., Jonke, J., Requena, G., Hofmann, M., Wimpory, R., & Ilie, S. (2013). Residual Stresses in Continuously Cast Steel Slabs. EUROMAT 2013, Sevilla, Spain. http://hdl.handle.net/20.500.12708/93759 ( reposiTUm)

Fernández Gutiérrez, R., Requena, G., Stauder, B., Maire, E., Isaac, A., Boller, E., Scheel, M., & Manke, I. (2013). 3D-CHARACTERIZATION OF AlCu4.5Mg0.3 AND AlCu7 ALLOYS. 1st International Conference on Tomography and Materials and Structures, Ghent, Belgium. http://hdl.handle.net/20.500.12708/93704 ( reposiTUm)

Rodríguez-Hortalá, M., Requena, G., Sket, F., Molina-Aldareguia, J., Maire, E., Salvo, L., & Scheel, M. (2013). 3D Damage characterisation during sequential tensile loading of a multidirectional carbon fibre reinforced epoxy laminate (CFRP). European Congress and Exhibition on Advanced Materials and Processes: EUROMAT 2013, Sevilla, Spain. http://hdl.handle.net/20.500.12708/93676 ( reposiTUm)

Fernández Gutiérrez, R., Requena, G., Stauder, B., Sket, F., Maire, E., Isaac, A., Scheel, M., Boller, E., & Manke, I. (2013). 3D-Characterization of AlCu4.5Mg0.3 and AlCu7 alloys after solution heat treatment and during in situ tensile tests. EUROMAT 2013, Sevilla, Spain. http://hdl.handle.net/20.500.12708/93705 ( reposiTUm)

Fernández Gutiérrez, R., Requena, G., Stauder, B., Maire, E., Isaac, A., Scheel, M., & Manke, I. (2013). 3D-CHARACTERIZATION OF AlCu4.5Mg0.3 AND AlCu7 ALLOYS. Aluminium 2000 World Congress, Mailand, Italy. http://hdl.handle.net/20.500.12708/93706 ( reposiTUm)

Tolnai, D., Requena, G., Salvo, L., & Cloetens, P. (2012). 3D characterization of microstructure evolution of cast AlMgSi alloys by synchrotron tomography. Avizo European User Group Meeting, Bordeaux - France, EU. http://hdl.handle.net/20.500.12708/93528 ( reposiTUm)

Requena, G. (2012). Linking properties and 3D architecture in multiphase engineering materials. Mateis Seminar, INSA Lyon - France, EU. http://hdl.handle.net/20.500.12708/93526 ( reposiTUm)

Requena, G. (2012). Time-resolved studies of engineering materials using hard X-rays. Materials Science, Imaging and Dynamics at XFEL.EU, Hamburg - Deutschland, EU. http://hdl.handle.net/20.500.12708/93527 ( reposiTUm)

Requena, G. (2012). Linking properties and 3D architecture in multiphase engineering materials. LCG Seminar, Ecole des Mines St Etienne, EU. http://hdl.handle.net/20.500.12708/93516 ( reposiTUm)

Rodríguez-Hortalá, M., Requena, G., Sket, F., Molina-Aldareguia, J., Maire, E., Salvo, L., & Scheel, M. (2012). In-situ synchrotron microtomography during tensile deformation of a ± 45° cross-ply carbon fibre reinforced epoxy laminate. Conference on Industrial Computed Tomography 2012, Wels, Austria. http://hdl.handle.net/20.500.12708/93437 ( reposiTUm)

Tolnai, D., Requena, G., Stark, A., & Hort, N. (2012). In situ characterization of solidification by synchrotron radiation. MagNET Research Network Workshop - Solidification of Magnesium Alloys, Montreal - Canada, Non-EU. http://hdl.handle.net/20.500.12708/93529 ( reposiTUm)

Requena, G. (2012). Linking properties and 3D architecture in multiphase engineering materials. Windmannstättentagung 2012, Linz, Austria. http://hdl.handle.net/20.500.12708/93530 ( reposiTUm)

Koos, R., Asghar, Z., & Requena, G. (2012). Effect of 3D Networks Formed by Ni, Cu and Fe Aluminides on the Strength of Al-Si Piston Alloys. ICAA13, Pittsburgh, Pennsylvania, USA, Non-EU. http://hdl.handle.net/20.500.12708/93496 ( reposiTUm)

Koos, R., Asghar, Z., & Requena, G. (2012). Effect of 3D Networks Formed by Ni, Cu and Fe Aluminides on the Strength of Al-Si Piston Alloys. 7th Seminar for Central European PhD Students, Trnava, Slovakia. http://hdl.handle.net/20.500.12708/93497 ( reposiTUm)

Koos, R., Asghar, Z., & Requena, G. (2012). Effect of 3D Networks Formed by Ni, Cu and Fe Aluminides on the Strength of Al-Si Piston Alloys. Archimat 2012, Prag, EU. http://hdl.handle.net/20.500.12708/93498 ( reposiTUm)

Tolnai, D., Townsend, P., Requena, G., Salvo, L., Lendvai, J., & Degischer, H.-P. (2011). In situ tomographic investigation of the solidification of AlMg5Si8. Euromat 2011, Montpellier, EU. http://hdl.handle.net/20.500.12708/93292 ( reposiTUm)

Tolnai, D., Townsend, P., Requena, G., Salvo, L., Lendvai, J., & Degischer, H.-P. (2011). In situ synchrotron tomographic investigation on the solidification of AlMg5Si8. ESRF Users’ Meeting, Grenoble, France. http://hdl.handle.net/20.500.12708/93293 ( reposiTUm)

Schöbel, M., Tolnai, D., Fiedler, G., Requena, G., Degischer, H.-P., Vaucher, S., & Salvo, L. (2011). In-situ Tomographie der Erstarrung einer AlSi7-Matrix zwischen SiC-Partikeln in Al-SiC. MMC Arbeitskreis, Karlsruhe, Germany. http://hdl.handle.net/20.500.12708/93258 ( reposiTUm)

Canelo Yubero, D., Requena, G., Poletti, C., Warchomicka, F., & Degischer, H.-P. (2011). Load partition and microstructural evolution during hot deformation of Ti-alloys. Metallkunde Kolloquium Lech Arlberg, Lech, Austria. http://hdl.handle.net/20.500.12708/93242 ( reposiTUm)

Tolnai, D., Requena, G., Cloetens, P., Lendvai, J., & Degischer, H.-P. (2010). Sub-micrometer holotomographic characterization of Mg2Si in strip cast AlMg7.3Si3.5. Junior EUROMAT, Lausanne, Schwitzerland, Non-EU. http://hdl.handle.net/20.500.12708/93124 ( reposiTUm)

Canelo Yubero, D., Requena, G., Poletti, C., Warchomicka, F., Degischer, H.-P., & Daniels, J. (2010). Load partitioning between the phases in Ti-alloys. 5th Seminar for PhD students “Research in progress on metallic materials,” Graz, Austria. http://hdl.handle.net/20.500.12708/93140 ( reposiTUm)

Requena, G. (2010). The effect of the interconnectivity of rigid phases in cast Al-Si alloys. Sitzung des Fachausschusses für Metallmatrix-Verbundwerkstoffe und zellulare Metalle - ASMET, Graz, Austria. http://hdl.handle.net/20.500.12708/93039 ( reposiTUm)

Requena, G., Cloetens, P., Altendorfer, W., Poletti, C., Tolnai, D., Warchomicka, F., & Degischer, H.-P. (2010). Sub-micrometer holotomography of multiphase metals. Journées Annuelles de la SF2M 2010, Paris, Frankreich, EU. http://hdl.handle.net/20.500.12708/93082 ( reposiTUm)

Asghar, Z., Requena, G., Degischer, H.-P., & Boller, E. (2010). The effect of 3D networks formed by aluminides and eutectic Si on the high temperature strength of cast Al-Si piston alloys. Materials science and engineering MSE 2010, Darmstadt, EU. http://hdl.handle.net/20.500.12708/93083 ( reposiTUm)

Schöbel, M., Requena, G., Altendorfer, W., & Degischer, H.-P. (2010). Internal stresses and voids in SiC particle reinforced Al composites. Institute Seminar, Iws, Tugraz, Graz, Austria. http://hdl.handle.net/20.500.12708/93103 ( reposiTUm)

Tolnai, D., Requena, G., Cloetens, P., Lendvai, J., & Degischer, H.-P. (2010). Sub-micrometer holotomographic characterization of coarsening of microstructure in AlMg7.3Si3.5. 3DIMS, Hourtin, France, EU. http://hdl.handle.net/20.500.12708/93127 ( reposiTUm)

Tolnai, D., Requena, G., Cloetens, P., Lendvai, J., & Degischer, H.-P. (2010). Sub-micrometer holotomographic characterization of coarsening of primary phases in AlMg7.3Si3.5. HETMAT Seminar, Le Castelet, France. http://hdl.handle.net/20.500.12708/93123 ( reposiTUm)

Requena, G., Cloetens, P., Altendorfer, W., Poletti, C., Tolnai, D., Warchomicka, F., & Degischer, H.-P. (2010). Sub-micrometer holotomography of multiphase metals. Metallkunde Kolloquium Lech Arlberg, Lech, Austria. http://hdl.handle.net/20.500.12708/93081 ( reposiTUm)

Requena, G., Asghar, Z., Degischer, H.-P., & Cloetens, P. (2009). 3D Study of Aluminides in Piston Alloys by Means of Light Optical and Synchrotron Tomography. 43. Metallographie-Tagung 2009 Materialographie, Deutschland, EU. http://hdl.handle.net/20.500.12708/92886 ( reposiTUm)

Requena, G. (2009). Tomography of heterogeneous materials and residual stress measurements by synchrotron and neutron diffraction. Austrian Cuban School on Material Science, Havana - Kuba, Non-EU. http://hdl.handle.net/20.500.12708/92881 ( reposiTUm)

Requena, G., Cloetens, P., Altendorfer, W., Tolnai, D., Poletti, C., Warchomicka, F., & Degischer, H.-P. (2009). ub-µm synchrotron tomography of multiphase metals using Kirkpatrick-Baez optics. Materials Science in the age of nano, Havana - Kuba, Non-EU. http://hdl.handle.net/20.500.12708/92883 ( reposiTUm)

Requena, G. (2009). Linking properties and architecture in heterogeneous light materials. Mini Symposium on Rising Star Programm, Erlangen - Deutschland, EU. http://hdl.handle.net/20.500.12708/92884 ( reposiTUm)

Tolnai, D., Requena, G., Salvo, L., Lendvai, J., & Degischer, H.-P. (2009). Observation of solidification of Al-based alloys. HETMAT Seminar, Le Castelet, France. http://hdl.handle.net/20.500.12708/92902 ( reposiTUm)

Requena, G., Marks, E. D., Degischer, H.-P., & Boller, E. (2008). Enhanced Creep Resistance by 3D connectivity of short fibre reinforcement in AlSi alloys. 5th International Conference on Cree, Fatigue and Creep-Fatigue Interaction, Kalpakkam, India, Non-EU. http://hdl.handle.net/20.500.12708/92629 ( reposiTUm)

Requena, G., Marks, E. D., & Boller, E. (2008). Evolution of the Connectivity of the Phases in a Short Fibre reinforced Al-piston Alloy during Creep. European Synchrotron Radiation Facility Users’ Day, Grenoble, EU. http://hdl.handle.net/20.500.12708/92630 ( reposiTUm)

Marks, E. D., Requena, G., Degischer, H.-P., & Boller, E. (2008). Microtomography and creep modelling of a short fibre reinforced aluminium alloy. 1st Conference on 3D-Imaging of Materials and Systems 2008, Carcans-Maubuisson - near Bordeaux, EU. http://hdl.handle.net/20.500.12708/92616 ( reposiTUm)

Nam, T. H., Requena, G., & Degischer, H.-P. (2008). Thermal Expansion study of AlSi7Mg matrix composites with high content SiC particles. CSM2008 - The International Conference on Computational Solid Mechanics, Hochiminh City, Vietnam, Non-EU. http://hdl.handle.net/20.500.12708/92590 ( reposiTUm)

Requena, G., Schöbel, M., Marks, E. D., Seiser, B., Fiedler, G., Altendorfer, W., & Degischer, H.-P. (2008). 3-D characterization of composite materials. Materials Science and Engineering, Nürnberg, Deutschland, EU. http://hdl.handle.net/20.500.12708/92885 ( reposiTUm)

Degischer, H.-P., Falahati, A., Requena, G., & Mohammadian, H. R. (2008). Precipitation Kinetics in Al-Alloys Revealed by Dilatometry. Materials Science and Engineering - MSE 2008, Nürnberg, EU. http://hdl.handle.net/20.500.12708/92887 ( reposiTUm)

Schöbel, M., Requena, G., Degischer, H.-P., Buslaps, T., & di Michiel, M. (2008). Residual stresses and void kinetics in particle reinforced metal matrix composites during thermal cycling. ESRF user meeting, Grenoble, EU. http://hdl.handle.net/20.500.12708/92644 ( reposiTUm)

Schöbel, M., Degischer, H.-P., Requena, G., & Altendorfer, W. (2008). Void kinetics in AlSiCp and AlCDp MMC during thermal cycling. Seminar “Heterogeneous Materials,” Wien, Austria. http://hdl.handle.net/20.500.12708/92645 ( reposiTUm)

Degischer, H.-P., Requena, G., Schöbel, M., Tolnai, D., Harrer, B., Kottar, A., Foroughi, B., Lasagni, F., Asghar, Z., Warchomicka, F., Hochegger, M., Fiedler, G., & Altendorfer, W. (2008). Tomographic methods revealing the three-dimensional structure of materials. Materials Science and Engineering - MSE 2008, Nürnberg, EU. http://hdl.handle.net/20.500.12708/92654 ( reposiTUm)

Bauer, B., Requena, G., Lieblich, M., & Degischer, H.-P. (2008). Creep resistance of Al-alloys reinforced with different SiC particle sizes. TU Budapest, Budapest, Hungary, Austria. http://hdl.handle.net/20.500.12708/92680 ( reposiTUm)

Bauer, B., Requena, G., Lieblich, M., & Degischer, H.-P. (2008). Kriechbeständigkeit von PM hergestellten Al-Legierungen in Abhängigkeit von der Größe der Verstärkungspartikel. Kriechen von PM - PRMs, Deutschland, Chemnitz, EU. http://hdl.handle.net/20.500.12708/92678 ( reposiTUm)

Bauer, B., Requena, G., & Lieblich, M. (2008). Erhöhung der Kriechbeständigkeit mit sinkender Partikelgröße von Al-Legierungen mit SiC-Partikel. Metallkunde Kolloquium Lech Arlberg, Lech, Austria. http://hdl.handle.net/20.500.12708/92679 ( reposiTUm)

Bauer, B., Requena, G., & Lieblich, M. (2008). Enhancement of Creep Resistance of Al-Alloys by Particle Reinforcement. Junioreuromat 2008, Lausanne, EU. http://hdl.handle.net/20.500.12708/92677 ( reposiTUm)

Suarez, C., & Requena, G. (2008). 3D characterisation of the porosity evolution of a short fibre reinforced AlSi alloy during creep. Seminar Research in progress on metallic materials, Bratislava, EU. http://hdl.handle.net/20.500.12708/92713 ( reposiTUm)

Requena, G., Marks, E. D., & Degischer, H.-P. (2008). Creep resistance of SFR-Al increasing with exposure time. HETMAT Seminar, Le Castelet, France. http://hdl.handle.net/20.500.12708/92717 ( reposiTUm)

Requena, G., Marks, E. D., & Boller, E. (2008). Evolution of the Connectivity of the Phases in a Short Fibre reinforced Al-piston Alloy during Creep. ESRF Users’ Meeting, Grenoble, France. http://hdl.handle.net/20.500.12708/92888 ( reposiTUm)

Schöbel, M., Requena, G., Degischer, H.-P., Buslaps, T., & Di Michiel, M. (2007). Residual stresses and void kinetics in AlSiCp MMCs during thermal cycling. MECA SENS IV - Conference on Stress Evaluation, Wien, Austria. http://hdl.handle.net/20.500.12708/92457 ( reposiTUm)

Bauer, B., & Requena, G. (2007). Vergleich der Kriechbeständigkeit von partikelverstärkten Al-Matrix Verbundwerkstoffen. 16. DGM-Symposium Verbundwerkstoffe und Werkstoffverbunde, Bremen/ Germany, EU. http://hdl.handle.net/20.500.12708/92505 ( reposiTUm)

Requena, G., & Schöbel, M. (2007). Thermal expansion, internal stress & void formation in AlSiC. 2nd Seminar on MODERN LIGHT METALS for doctoral students of Charles University Praha and University of Technology Vienna/IMST, Wien, Austria. http://hdl.handle.net/20.500.12708/92500 ( reposiTUm)

Requena, G. (2006). Isothermes und thermo-zyklisches Kriechen von teilchenverstärktem Aluminium. Seminar über Metal Matrix Composites MMC , TU Chemnitz, Chemnitz/Deutschland, EU. http://hdl.handle.net/20.500.12708/92478 ( reposiTUm)

Requena, G. (2004). Kriechen von diskontinuierlich verstärkten Al-Legierungen bei isothermer und zyklischer Temperaturbelastung. Sitzung des ASMET-Fachausschusses für MMC-Verbunde und zellulare Metalle, Slowakische Akademie der Wissenschaften Bratislava, Austria. http://hdl.handle.net/20.500.12708/91984 ( reposiTUm)

Requena, G. (2004). Kriechen von diskontinuierlich verstärkten Al-Legierungen bei isothermen und zyklischen Temperaturbelastungen. Sitzung des DGM-Fachausschusses “Metallische Verbundwerkstoffe und zellulare Metalle,” Friedrichshafen (Deutschland), Austria. http://hdl.handle.net/20.500.12708/91985 ( reposiTUm)

Lasagni, F., Requena, G., Degischer, H.-P., Mingler, B., & Papakyriacou, M. (2004). Entmischung in Al-Si-Legierungen. 38. Metallographie-Tagung 2004, Bochum, Austria. http://hdl.handle.net/20.500.12708/91979 ( reposiTUm)

Requena, G., & Degischer, H.-P. (2004). Isothermal Creep Resistance of Discontinuously Reinforced Al-Alloys. Werkstoffwoche 2004, München, Austria. http://hdl.handle.net/20.500.12708/91991 ( reposiTUm)

Requena, G. (2004). Creep tests on particle and short fiber reinforced Al-alloys. Seminar on „Modern Light Metals", Charles University Prague, Austria. http://hdl.handle.net/20.500.12708/91993 ( reposiTUm)

Requena, G., Lasagni, F., & Degischer, H.-P. (2003). Lokale Verformung in diskontinuierlich verstärktem Aluminium. 14. DGM Symposium Verbundwerkstoffe und Werkstoffverbunde, Wien, Austria. http://hdl.handle.net/20.500.12708/91676 ( reposiTUm)

Requena, G., Telfser, D., Prader, P., & Degischer, H.-P. (2002). Deformation of Particle Reinforced AA6061 Aluminium Alloy exposed to Tensile Creep and to Thermal Cycling Creep. Junior Euromat 2002, Lausanne (Schweiz), Austria. http://hdl.handle.net/20.500.12708/91980 ( reposiTUm)

Bauer, B., & Requena, G. (2007). Metallographie von teilchenverstärktem Aluminium. http://hdl.handle.net/20.500.12708/34852 ( reposiTUm)

Bauer, B., & Requena, G. (2007). Untersuchung des Ausdehnungsverhaltens von Al-Motorlegierungen. http://hdl.handle.net/20.500.12708/34855 ( reposiTUm)

Requena, G. (2007). Bestimmung der Stabilisierungswärmebehandlung für eine AlSi13Cu1Mg nach 2 verschiedenen Strangpressungen. http://hdl.handle.net/20.500.12708/34853 ( reposiTUm)

Requena, G. (2007). Thermische Stabilisierung einer AlSi7 Legierung und einer AlSi17 Legierung. http://hdl.handle.net/20.500.12708/34854 ( reposiTUm)

Degischer, H.-P., Jancek, R., Requena, G., & Zellhofer, S. (2003). Machbarkeitsuntersuchung für kontinuierliches Aufschäumen von Aluminium. http://hdl.handle.net/20.500.12708/34463 ( reposiTUm)

Degischer, H.-P., Kriszt, B., Jancek, R., Requena, G., & Zellhofer, S. (2003). Machbarkeitsuntersuchung für kontinuierliches Aufschäumen von Aluminium. http://hdl.handle.net/20.500.12708/34458 ( reposiTUm)

Requena, G. (2010). Linking properties and architecture in heterogeneous lightweight materials [Professorial Dissertation, Technische Universität Wien]. reposiTUm. http://hdl.handle.net/20.500.12708/159473 ( reposiTUm)

Requena, G. (2004). Creep behaviour of discontinuously reinforced aluminium alloys [Dissertation, Technische Universität Wien]. reposiTUm. https://resolver.obvsg.at/urn:nbn:at:at-ubtuw:1-9407 ( reposiTUm)