Nistler, S., Hofstetter, C., Baudis, S., Schwentenwein, M., & Stampfl, J. (2025). Sinter-joining of two different bioceramic materials. Open Ceramics, 22, Article 100759. https://doi.org/10.1016/j.oceram.2025.100759 ( reposiTUm)

Nistler, S., Hofstetter, C., Baudis, S., Schwentenwein, M., & Stampfl, J. (2025). Sinter-joined bioceramics for hybrid bone implants. Transactions on Additive Manufacturing Meets Medicine, 7(S1), Article 2095. https://doi.org/10.18416/AMMM.2025.25062095 ( reposiTUm)

Fantoni, A., Salvadori, A., Ovsianikov, A., Liska, R., & Baudis, S. (2025). Highlighting the Influence between Physical and Chemical Cross-Linking in Dynamic Hydrogels for Two-Photon Micropatterning. Biomacromolecules, 26(7), 4084–4094. https://doi.org/10.1021/acs.biomac.5c00062 ( reposiTUm)

Bogdanovic, D., Wolff, R., Mete, Y. D., Koch, T., Stampfl, J., Baudis, S., Ehrmann, K., & Liska, R. (2024). 3D printable aliphatic polycarbonate networks from cationic ring-opening photopolymerization of spiro-orthocarbonates. European Polymer Journal, 208, Article 112876. https://doi.org/10.1016/j.eurpolymj.2024.112876 ( reposiTUm)

Elgoyhen, J., Le, C. M. Q., Ricke, A., Liska, R., Baudis, S., Chemtob, abraham, & Tomovska, R. (2024). Implementing miniemulsion photopolymerization for synthesis of waterborne biobased poly(thioethers) coatings. Progress in Organic Coatings, 187, Article 108156. https://doi.org/10.1016/j.porgcoat.2023.108156 ( reposiTUm)

Ajami, A., Ovsianikov, A., Liska, R., & Baudis, S. (2024). Z-scan technique: a review from conventional Z-scan to white light Z-scan. APPLIED PHYSICS B-LASERS AND OPTICS, 130, Article 138. https://doi.org/10.1007/s00340-024-08262-5 ( reposiTUm)

Ricke, A., Berk, O., Koch, T., Liska, R., & Baudis, S. (2024). Cyclic acetals as expanding monomers to reduce shrinkage. Angewandte Chemie, Article e202414938. https://doi.org/10.34726/6999 ( reposiTUm)

Fantoni, A., Koch, T., Liska, R., & Baudis, S. (2024). A Systematic Study on Biobased Epoxy-Alcohol Networks: Highlighting the Advantage of Step-Growth Polyaddition over Chain-Growth Cationic Photopolymerization. Macromolecular Rapid Communications, e2400323. https://doi.org/10.1002/marc.202400323 ( reposiTUm)

Schwarzl, P., Koch, T., Liska, R., & Baudis, S. (2024). Macromolecular metamorphosis of thermoplastic poly(thio)urethanes containing boronic acid esters. Journal of Applied Polymer Science. https://doi.org/10.1002/app.56429 ( reposiTUm)

Specht, S. J., Rohringer, S., Hager, P., Grasl, C., Schmitt, A., Pach, V. J. C., Ehrmann, K., Baudis, S., Liska, R., Kiss, H., Schneider, K. H., Podesser, B. K., & Bergmeister, H. (2024). Decellularized Extracellular Matrix and Polyurethane Vascular Grafts Have Positive Effects on the Inflammatory and Pro‐Thrombotic State of Aged Endothelial Cells. Journal of Biomedical Materials Research Part A. https://doi.org/10.1002/jbm.a.37830 ( reposiTUm)

Woletz, M., Chalupa-Gantner, F., Hager, B., Ricke, A., Mohammadi, S., Binder, S., Baudis, S., Ovsianikov, A., Windischberger, C., & Nagy, Z. (2024). Toward Printing the Brain: A Microstructural Ground Truth Phantom for MRI. Advanced Materials Technologies, 9(3), Article 2300176. https://doi.org/10.1002/admt.202300176 ( reposiTUm)

Baudis, S., Roch, T., Balk, M., Wischke, C., Lendlein, A., & Behl, M. (2024). Multivariate Analysis of Cellular Uptake Characteristics for a (Co)polymer Particle Library. ACS BIOMATERIALS SCIENCE & ENGINEERING, 10, 1481–1493. https://doi.org/10.1021/acsbiomaterials.3c01803 ( reposiTUm)

Sinawehl, L., Steinbauer, P., Kojic, D., Slezak, P., Redl, H., & Baudis, S. (2024). Ternary thiol–ene systems as high-performance bone adhesives for potential clinical use. RSC Applied Polymers. https://doi.org/10.1039/D4LP00094C ( reposiTUm)

Kojic, D., Ehrmann, K., Wolff, R., Mete, Y., Koch, T., Stampfl, J., Baudis, S., & Liska, R. (2023). Stereolithographic 3D printing of pure poly(ether–ester) networks from spirocyclic monomers via cationic ring-opening photopolymerization at high temperatures. Polymer Chemistry, 14(42), 4809–4818. https://doi.org/10.1039/D3PY00787A ( reposiTUm)

Sinawehl, L., Wolff, R., Koch, T., Stampfl, J., Liska, R., & Baudis, S. (2023). Photopolymers based on boronic esters for the enhanced degradation of 3D-printed scaffolds. ACS Applied Polymer Materials, 5(7), 5758–5771. https://doi.org/10.1021/acsapm.3c01000 ( reposiTUm)

Fantoni, A., Koch, T., Baudis, S., & Liska, R. (2023). Synthesis and Characterization of Homogeneous Epoxy Networks: Development of a Sustainable Material Platform Using Epoxy-Alcohol Polyaddition. ACS Applied Polymer Materials, 5(1), 731–742. https://doi.org/10.1021/acsapm.2c01728 ( reposiTUm)

Fantoni, A., Ecker, J., Ahmadi, M., Koch, T., Stampfl, J., Liska, R., & Baudis, S. (2023). Green monomers for 3D printing: epoxy-methacrylate interpenetrating polymer networks as a versatile alternative for toughness enhancement in additive manufacturing. ACS SUSTAINABLE CHEMISTRY & ENGINEERING, 11(32), 12004–12013. https://doi.org/10.1021/acssuschemeng.3c02194 ( reposiTUm)

Hobiger, V., Kutsch, A.-L., Stampfl, J., Liska, R., Baudis, S., & Krajnc, P. (2023). Thiol-Acrylate polyHIPEs via Facile Layer-by-Layer Photopolymerization. 3D Printing and Additive Manufacturing. https://doi.org/10.1089/3dp.2022.0289 ( reposiTUm)

Keck, S., Liske, O., Seidler, K., Steyrer, B., Gorsche, C., Knaus, S., & Baudis, S. (2023). Synthesis of a Liquid Lignin-Based Methacrylate Resin and Its Application in 3D Printing without Any Reactive Diluents. Biomacromolecules. https://doi.org/10.1021/acs.biomac.2c01505 ( reposiTUm)

Rohringer, S., Grasl, C., Ehrmann, K., Hager, P., Hahn, C., Specht, S. J., Walter, I., Schneider, K. H., Zopf, L. M., Baudis, S., Liska, R., Schima, H., Podesser, B., & Bergmeister, H. (2023). Biodegradable, Self-Reinforcing Vascular Grafts for In Situ Tissue Engineering Approaches. Advanced Healthcare Materials, Article 2300520. https://doi.org/10.1002/adhm.202300520 ( reposiTUm)

Seifert, B., Baudis, S., & Wischke, C. (2023). Composition-dependent protein-material interaction of poly(methyl methacrylate-co-styrene) nanoparticle series. International Journal of Molecular Sciences, 24(22), Article 16390. https://doi.org/10.3390/ijms242216390 ( reposiTUm)

Duan, Q., Zhang, W.-C., Liu, J., Jin, F., Dong, X.-Z., Bin, F.-C., Steinbauer, P., Zerobin, E., Guo, M., Li, T., Baudis, S., & Zheng, M.-L. (2023). 22 nm Resolution Achieved by Femtosecond Laser Two-Photon Polymerization of a Hyaluronic Acid Vinyl Ester Hydrogel. ACS Applied Materials and Interfaces, 15(22), 26472–26483. https://doi.org/10.1021/acsami.3c04346 ( reposiTUm)

Dellago, B., Altun, A. A., Liska, R., & Baudis, S. (2022). Exploring the limits of toughness enhancers for 3D printed photopolymers as bone replacement materials. Journal of Polymer Science. https://doi.org/10.1002/pol.20220378 ( reposiTUm)

Steinbauer, P., Liska, R., & Baudis, S. (2022). Approaching new biomaterials: copolymerization characteristics of vinyl esters with norbornenes, allyl esters and allyl ethers. Polymer International, 1–7. https://doi.org/10.1002/pi.6313 ( reposiTUm)

Haslinger, C., Zahoranová, A., & Baudis, S. (2022). Synthesis of coumarin-containing poly(2-oxazoline)s and light-induced crosslinking for hydrogel formation. Monatshefte Für Chemie - Chemical Monthly. https://doi.org/10.1007/s00706-022-03013-8 ( reposiTUm)

Sayer, S., Zandrini, T., Markovic, M., Van Hoorick, J., Van Vlierberghe, S., Baudis, S., Holnthoner, W., & Ovsianikov, A. (2022). Guiding cell migration in 3D with high-resolution photografting. Scientific Reports, 12, Article 8626. https://doi.org/10.1038/s41598-022-11612-y ( reposiTUm)

Lunzer, M., Maryasin, B., Zandrini, T., Baudis, S., Ovsianikov, A., & Liska, R. (2022). A disulfide-based linker for thiol-norbornene conjugation: formation and cleavage of hydrogels by the use of light. Polymer Chemistry, 13(9), 1158–1168. https://doi.org/10.1039/d1py00914a ( reposiTUm)

Haslinger, C., Leutgeb, L. P., Haas, M., Baudis, S., & Liska, R. (2022). Synthesis and Photochemical Investigation of Tetraacylgermanes. ChemPhotoChem. https://doi.org/10.1002/cptc.202200108 ( reposiTUm)

Heinze, M., Horn, C., Pospiech, D., Boldt, R., Kobsch, O., Eckstein, K., Jehnichen, D., Voit, B., Baudis, S., Liska, R., Naumova, A., Saalwächter, K., Lendenmann, U., & Moszner, N. (2021). Polymer Networks for Enrichment of Calcium Ions. Polymers, 13(20), 3506. https://doi.org/10.3390/polym13203506 ( reposiTUm)

Hölzl, K., Fürsatz, M., Göcerler, H., Schädl, B., Zigon-Branc, S., Markovic, M., Gahleitner, C., Van Hoorick, J., van Vlierberghe, S., Kleiner, A., Baudis, S., Pauschitz, A., Redl, H., Ovsianikov, A., & Nürnberger, S. (2021). Gelatin methacryloyl as environment for chondrocytes and cell delivery to superficial cartilage defects. Journal of Tissue Engineering and Regenerative Medicine, 16(2), 207–222. https://doi.org/10.1002/term.3273 ( reposiTUm)

Arslan, A., Vanmol, K., Dobos, A., Natale, A., Van Hoorick, J., Roose, P., Van den Bergen, H., Chalyan, T., Ovsianikov, A., Baudis, S., Rogiers, V., Vanhaecke, T., Rodrigues, R. M., Thienpont, H., Van Erps, J., Van Vlierberghe, S., & Dubruel, P. (2021). Increasing the Microfabrication Performance of Synthetic Hydrogel Precursors through Molecular Design. Biomacromolecules, 22(12), 4919–4932. https://doi.org/10.1021/acs.biomac.1c00704 ( reposiTUm)

Baudis, S., & Behl, M. (2021). High-Throughput and Combinatorial Approaches for the Development of Multifunctional Polymers. Macromolecular Rapid Communications, 43(12), 2100400. https://doi.org/10.1002/marc.202100400 ( reposiTUm)

Dellago, B., Ricke, A., Geyer, T., Liska, R., & Baudis, S. (2021). Photopolymerizable precursors for degradable biomaterials based on acetal moieties. European Polymer Journal, 154, Article 110536. https://doi.org/10.1016/j.eurpolymj.2021.110536 ( reposiTUm)

Steinbauer, P., Rohatschek, A., Andriotis, O., Bouropoulos, N., Liska, R., Thurner, P. J., & Baudis, S. (2021). Biomimetic adhesion motifs based on RAFT polymers with phosphonate groups. European Polymer Journal, 143, Article 110188. https://doi.org/10.1016/j.eurpolymj.2020.110188 ( reposiTUm)

Hobiger, V., Zahoranova, A., Baudis, S., Liska, R., & Krajnc, P. (2021). Thiol-Ene Cross-linking of Poly(ethylene glycol) within High Internal Phase Emulsions: Degradable Hydrophilic PolyHIPEs for Controlled Drug Release. Macromolecules, 54(22), 10370–10380. https://doi.org/10.1021/acs.macromol.1c01240 ( reposiTUm)

Rebers, L., Reichsöllner, R., Regett, S., Tovar, G. E. M., Borchers, K., Baudis, S., & Southan, A. (2021). Differentiation of physical and chemical cross-linking in gelatin methacryloyl hydrogels. Scientific Reports, 11, Article 3256. https://doi.org/10.1038/s41598-021-82393-z ( reposiTUm)

Enayati, M., Puchhammer, S., Iturri, J., Grasl, C., Kaun, C., Baudis, S., Walter, I., Schima, H., Liska, R., Wojta, J., Toca-Herrera, J. L., Podesser, B. K., & Bergmeister, H. (2020). Assessment of a long-term in vitro model to characterize the mechanical behavior and macrophage-mediated degradation of a novel, degradable, electrospun poly-urethane vascular graft. Journal of the Mechanical Behavior of Biomedical Materials, 112(104077), 104077. https://doi.org/10.1016/j.jmbbm.2020.104077 ( reposiTUm)

Zerobin, E., Markovic, M., Tomášiková, Z., Qin, X.-H., Ret, D., Steinbauer, P., Kitzmüller, J., Steiger, W., Gruber, P., Ovsianikov, A., Liska, R., & Baudis, S. (2020). Hyaluronic acid vinyl esters: A toolbox toward controlling mechanical properties of hydrogels for 3D microfabrication. Journal of Polymer Science, 58(9), 1288–1298. https://doi.org/10.1002/pol.20200073 ( reposiTUm)

Zhang, X., Keck, S., Qi, Y., Baudis, S., & Zhao, Y. (2020). Study on Modified Dealkaline Lignin as Visible Light Macromolecular Photoinitiator for 3D Printing. ACS Sustainable Chemistry and Engineering, acssuschemeng.0c03587. https://doi.org/10.1021/acssuschemeng.0c03587 ( reposiTUm)

Ehrmann, K., Potzmann, P., Dworak, C. L., Bergmeister, H., Eilenberg, M., Grasl, C., Koch, T., Schima, H., Liska, R., & Baudis, S. (2020). Hard Block Degradable Polycarbonate Urethanes: Promising Biomaterials for Electrospun Vascular Prostheses. Biomacromolecules, 21(2), 376–387. https://doi.org/10.1021/acs.biomac.9b01255 ( reposiTUm)

Steinbauer, P., Rohatschek, A., Andriotis, O., Bouropoulos, N., Liska, R., Thurner, P. J., & Baudis, S. (2020). Single-Molecule Force Spectroscopy Reveals Adhesion-by-Demand in Statherin at the Protein-Hydroxyapatite Interface. Langmuir, 36(44), 13292–13300. https://doi.org/10.1021/acs.langmuir.0c02325 ( reposiTUm)

Zahoranová, A., Vojtova, L., Dusicka, E., Michlovska, L., Krivankova, N., & Baudis, S. (2020). Hybrid Hydrogel Networks by Photocrosslinking of Thermoresponsive α,ω‐Itaconyl‐PLGA‐PEG‐PLGA Micelles in Water: Influence of the Lithium Phenyl‐2,4,6‐Trimethylbenzoylphosphinate Photoinitinator. Macromolecular Chemistry and Physics, 221(17), Article 2000165. https://doi.org/10.1002/macp.202000165 ( reposiTUm)

Ehrmann, K., Baudis, S., & Stöger, B. (2019). From space group to space groupoid: the partial symmetry of low-temperature E-vanillyl oxime. ACTA CRYSTALLOGRAPHICA SECTION B-STRUCTURAL SCIENCE CRYSTAL ENGINEERING AND MATERIALS, 75(4), 733–741. https://doi.org/10.1107/s2052520619008461 ( reposiTUm)

Dobos, A., Van Hoorick, J., Steiger, W., Gruber, P., Markovic, M., Andriotis, O. G., Rohatschek, A., Dubruel, P., Thurner, P. J., Van Vlierberghe, S., Baudis, S., & Ovsianikov, A. (2019). Thiol-Gelatin-Norbornene Bioink for Laser-Based High-Definition Bioprinting. Advanced Healthcare Materials, 9(15), 1900752. https://doi.org/10.1002/adhm.201900752 ( reposiTUm)

Eilenberg, M., Enayati, M., Ehebruster, D., Grasl, C., Walter, I., Messner, B., Baudis, S., Potzmann, P., Kaun, C., Podesser, B. K., Wojta, J., & Bergmeister, H. (2019). Long Term Evaluation of Nanofibrous, Bioabsorbable Polycarbonate Urethane Grafts for Small Diameter Vessel Replacement in Rodents. European Journal of Vascular and Endovascular Surgery, 59(4), 643–652. https://doi.org/10.1016/j.ejvs.2019.11.004 ( reposiTUm)

Žigon-Branc, S., Markovic, M., Van Hoorick, J., Van Vlierberghe, S., Dubruel, P., Zerobin, E., Baudis, S., & Ovsianikov, A. (2019). Impact of hydrogel stiffness on differentiation of human adipose-derived stem cell microspheroids. Tissue Engineering, Parts A, B, & C, 25(19–20), 1369–1380. https://doi.org/10.1089/ten.tea.2018.0237 ( reposiTUm)

Hofstetter, C., Orman, S., Baudis, S., & Stampfl, J. (2018). Combining cure depth and cure degree, a new way to fully characterize novel photopolymers. Additive Manufacturing, 24, 166–172. https://doi.org/10.1016/j.addma.2018.09.025 ( reposiTUm)

Van Hoorick, J., Gruber, P., Markovic, M., Rollot, M., Graulus, G.-J., Vagenende, M., Tromayer, M., Van Erps, J., Thienpont, H., Martins, J. C., Baudis, S., Ovsianikov, A., Dubruel, P., & Van Vlierberghe, S. (2018). Highly Reactive Thiol‐Norbornene Photo‐Click Hydrogels: Toward Improved Processability. Macromolecular Rapid Communications, 39(14), 1800181. https://doi.org/10.1002/marc.201800181 ( reposiTUm)

Wang, J., Stanic, S. D., Altun, A. A., Schwentenwein, M., Dietliker, K., Jin, L., Stampfl, J., Baudis, S., Liska, R., & Grützmacher, H. (2018). A highly efficient waterborne photoinitiator for visible-light-induced three-dimensional printing of hydrogels. Chemical Communications, 54(8), 920–923. https://doi.org/10.1039/c7cc09313f ( reposiTUm)

Orman, S., Hofstetter, C., Aksu, A., Reinauer, F., Liska, R., & Baudis, S. (2018). Toughness enhancers for bone scaffold materials based on biocompatible photopolymers. Journal of Polymer Science, 57(2), 110–119. https://doi.org/10.1002/pola.29273 ( reposiTUm)

Seidler, K., Ehrmann, K., Steinbauer, P., Rohatschek, A., Andriotis, O., Dworak, C., Koch, T., Bergmeister, H., Grasl, C., Schima, H., Thurner, P., Liska, R., & Baudis, S. (2018). A structural reconsideration: Linear aliphatic or alicyclic hard segments for biodegradable thermoplastic polyurethanes? Journal of Polymer Science, 56(19), 2214–2224. https://doi.org/10.1002/pola.29190 ( reposiTUm)

Theis, S., Iturmendi, A., Gorsche, C., Orthofer, M., Lunzer, M., Baudis, S., Ovsianikov, A., Liska, R., Monkowius, U., & Teasdale, I. (2017). Durch sichtbares Licht und Nahinfrarotstrahlung abbaubare supramolekulare Metallo-Gele. Angewandte Chemie, 129(50), 16071–16075. http://hdl.handle.net/20.500.12708/147215 ( reposiTUm)

Theis, S., Iturmendi, A., Gorsche, C., Orthofer, M., Lunzer, M., Baudis, S., Ovsianikov, A., Liska, R., Monkowius, U., & Teasdale, I. (2017). Metallo-​Supramolecular Photocleavable Gels Sensitive to Visible and Near Infrared Irradiation. Angewandte Chemie International Edition, 56(50), 15857–15860. http://hdl.handle.net/20.500.12708/146897 ( reposiTUm)

Gorsche, C., Reghunathan, H., Baudis, S., Knaack, P., Husar, B., Laeuger, J., Hoffmann, H., & Liska, R. (2017). Real Time-NIR/MIR-Photorheology: A Versatile Tool for the in Situ Characterization of Photopolymerization Reactions. Analytical Chemistry, 89(9), 4958–4968. https://doi.org/10.1021/acs.analchem.7b00272 ( reposiTUm)

Baudis, S., Bomze, D., Markovic, M., Gruber, P., Ovsianikov, A., & Liska, R. (2016). Modular Material System for the Microfabrication of Biocompatible Hydrogels Based on Thiol-Ene-Modified Poly(vinyl alcohol). Journal of Polymer Science Part A: Polymer Chemistry, 54(13), 2060–2070. http://hdl.handle.net/20.500.12708/148654 ( reposiTUm)

Markus, F., Dreher, F., Laschat, S., Baudis, S., Tovar, G., & Southhan, A. (2016). Physically and chemically gelling hydrogel formulations based on poly(ethylene glycol) diacrylate and Poloxamer 407. Polymer, 2016–2017(108), 21–28. http://hdl.handle.net/20.500.12708/149312 ( reposiTUm)

Baudis, S. (2016). Knochen, Knorpel und Gefäße maßschneidern mit Licht. Nachrichten Aus Der Chemie, 64(4), 406–410. http://hdl.handle.net/20.500.12708/149326 ( reposiTUm)

Baudis, S. (2016). Knochen, Knorpel und Gefäße maßschneidern mit Licht. Nachrichten aus der Chemie, 64(4), 406–410. https://doi.org/10.1002/nadc.20164043143 ( reposiTUm)

Bergmeister, H., Seyidova, N., Schreiber, C., Strobl, M., Grasl, C., Walter, I., Messner, B., Baudis, S., Fröhlich, S., Marchetti-Deschmann, M., Griesser, M., di Franco, M., Krssak, M., Liska, R., & Schima, H. (2015). Biodegradable, thermoplastic polyurethane grafts for small diameter vascular replacements. Acta Biomaterialia, 11, 104–113. https://doi.org/10.1016/j.actbio.2014.09.003 ( reposiTUm)

Ligon, S., Baudis, S., Nehl, F., Bergmeister, H., Nigisch, A., Stampfl, J., Liska, R., & Husar, B. (2012). Improved elastomeric materials for CAD/CAM generation of vascular structures in soft tissue replacement therapies. Journal of Tissue Engineering and Regenerative Medicine, 6(Supplement 1), 301. http://hdl.handle.net/20.500.12708/165077 ( reposiTUm)

Baudis, S., Ligon, S., Seidler, K., Weigel, G., Grasl, C., Bergmeister, H., Schima, H., & Liska, R. (2012). Hard-Block Degradable Thermoplastic Urethane-Elastomers for Electrospun Vascular Prostheses. Journal of Polymer Science Part A: Polymer Chemistry, 50(7), 1272–1280. http://hdl.handle.net/20.500.12708/164664 ( reposiTUm)

Schreiber, C., Seyidova, N., Baudis, S., Grasl, C., Walter, I., Bernhard, D., Liska, R., Schima, H., & Bergmeister, H. (2012). Long term evaluation of a new synthetic degradable small diameter vascular graft. European Surgery, 44(Supplement 245/12), 16. http://hdl.handle.net/20.500.12708/164908 ( reposiTUm)

Schreiber, C., Seyidova, N., Baudis, S., Grasl, C., Stoiber, M., Liska, R., Schima, H., & Bergmeister, H. (2012). Long-term performance of small diameter vessel grafts. European Surgery, 44(Supplement 244/12), 7. http://hdl.handle.net/20.500.12708/164906 ( reposiTUm)

Schreiber, C., Baudis, S., Grasl, C., Stoiber, M., Walter, I., Plasenzotti, R., Bernhard, D., Liska, R., Schima, H., & Bergmeister, H. (2011). In-vivo evaluation of biodegradable and non-degradable elastomeric vascular grafts. European Surgery, 43(Supplement 243/11), 23. http://hdl.handle.net/20.500.12708/164905 ( reposiTUm)

Baudis, S., Nehl, F., Ligon, S. C., Nigisch, A., Bergmeister, H., Bernhard, D., Stampfl, J., & Liska, R. (2011). Elastomeric degradable biomaterials by photopolymerization-based CAD-CAM for vascular tissue engineering. Biomedical Materials, 6(5), 055003. https://doi.org/10.1088/1748-6041/6/5/055003 ( reposiTUm)

Bergmeister, H., Baudis, S., Grasl, C., Stoiber, M., Schreiber, C., Walter, I., Plasenzotti, R., Liska, R., & Schima, H. (2011). In vivo evaluation of electrospun, biodegradable and non-degradable elastomeric vascular grafts. International Journal of Artificial Organs, 34(8), 641. http://hdl.handle.net/20.500.12708/164903 ( reposiTUm)

Baudis, S., Steyrer, B., Pulka, T., Wilhelm, H., Weigel, G., Bergmeister, H., Stampfl, J., & Liska, R. (2010). Photopolymerizable Elastomers for Vascular Tissue Regeneration. Macromolecular Symposia, 296(1), 121–126. https://doi.org/10.1002/masy.201051018 ( reposiTUm)

Baudis, S., Heller, C., Liska, R., Stampfl, J., Bergmeister, H., & Weigel, G. (2009). (Meth)acrylate-based photoelastomers as tailored biomaterials for artificial vascular grafts. Journal of Polymer Science Part A: Polymer Chemistry, 47(10), 2664–2676. https://doi.org/10.1002/pola.23352 ( reposiTUm)

Stampfl, J., Baudis, S., Heller, C., Liska, R., Neumeister, A., Kling, R., Ostendorf, A., & Spitzbart, M. (2008). Photopolymers with tunable mechanical properties processed by laser based high-resolution stereolithography. Journal of Micromechanics and Microengineering, 18(12), 125014. https://doi.org/10.1088/0960-1317/18/12/125014 ( reposiTUm)

Stampfl, J., Baudis, S., Heller, C., Liska, R., Neumeister, A., KLING, R., Ostendorf, A., & Spitzbart, M. (2008). Photopolymers with tunable mechanical properties processed by laser-based high-resolution stereolithography. Journal of Micromechanics and Microengineering, 18(12), 125014. https://doi.org/10.1088/0960-1317/18/12/125014 ( reposiTUm)

Fantoni, A., Salvadori, A., Ovsianikov, A., Liska, R., & Baudis, S. (2025). Exploring Photo-Induced Polymerization and Localized Degradation in Dynamic Disulfide-Containing Hydrogels. In 15th Advanced Polymers via Macromolecular Engineering Conference (APME2025) - Book of Abstracts (pp. 349–349). http://hdl.handle.net/20.500.12708/217348 ( reposiTUm)

Fantoni, A., Ecker, J., Ahmadi, M., Koch, T., Stampfl, J., Liska, R., & Baudis, S. (2024). Sustainable Epoxy-methacrylate Interpenetrating Polymer Networks: Broadening the  Scope of High-performance Materials for Stereolithography. In Book of Abstracts ESPS 2024: 8th European Symposium of  Photopolymer Science (pp. 77–77). ( reposiTUm)

Baudis, S. (2024). Shaping Macromolecular Materials for Biomedical Applications. In Abstract Book AFPM:  Advanced Functional Polymers for Medicine 2024 (pp. 8–8). ( reposiTUm)

Fantoni, A., Salvadori, A., Baudis, S., Ovsianikov, A., & Liska, R. (2024). Two-in-one biomaterials: exploring photo-induced polymerization and photodegradation of disulfide-based hydrogels. In 2nd TCH Science Days: PhD & Postdoc Day: Book of Abstracts (pp. 27–27). ( reposiTUm)

Baudis, S. (2024). Biofabrication: A photochemical toolbox to engineer the microenvironment of cells. In 6th EPNOE Junior Scientist Meeting 2024 (pp. 70–70). ( reposiTUm)

Fantoni, A., Liska, R., & Baudis, S. (2024). Expanding the limits of aliphatic photoinitiators based on α-ketoesters for free radical photopolymerization. In Book of Abstracts ESPS 2024:  8th European Symposium of  Photopolymer Science (pp. 74–74). http://hdl.handle.net/20.500.12708/202809 ( reposiTUm)

Haslinger, C., Liska, R., & Baudis, S. (2024). Investigation of Novel Long Wavelength Photoinitiators for Radical Polymerization. In Book of Abstracts ESPS 2024:  8th European Symposium of  Photopolymer Science (pp. 115–115). AIDIC. https://doi.org/10.34726/8532 ( reposiTUm)

Haslinger, C., Liska, R., & Baudis, S. (2024). Revolutionary Sn-based photoinitiators: how to combine long wavelengths with reactivity and stability. In 2nd TCH Science Days: PhD & Postdoc Day: Book of Abstracts (pp. 31–31). https://doi.org/10.34726/8581 ( reposiTUm)

Schmidbauer, A., Baltzaki, M. C. I., Markovic, M., Slezak, P., Redl, H., & Baudis, S. (2024). Human Platelet Lysate-functionalized Hydrogels as an Innovative approach for Bone Regeneration. In 2nd TCH Science Days PhD & Postdoc Day : Book of Abstracts (pp. 22–22). https://doi.org/10.34726/8683 ( reposiTUm)

Schmidbauer, A., Baltzaki, M. C. I., Markovic, M., Slezak, P., Redl, H., & Baudis, S. (2024). Human Platelet Lysate-functionalized Hydrogels - A Novel Solution for Bone Regeneration. In Advanced Functional Polymers for Medicine (AFPM) (pp. 35–35). http://hdl.handle.net/20.500.12708/211537 ( reposiTUm)

Gurmann, T., Sinawehl, L., Zintl, M., Wolff, R., Koch, T., Stampfl, J., Liska, R., Slezak, P., Redl, H., & Baudis, S. (2024). Designed to Be Broken Down: Boronic Ester Photopolymers for Improved Degradation of 3D-Printed Scaffolds. In Abstract Book Advanced Functional Polymers for Medicine 2024 (pp. 42–42). http://hdl.handle.net/20.500.12708/204667 ( reposiTUm)

Gurmann, T., Sinawehl, L., Zintl, M., Wolff, R., Koch, T., Stampfl, J., Liska, R., Slezak, P., Redl, H., & Baudis, S. (2024). Photopolymers containing boronic esters for improved degradation of 3D-printed scaffolds. In 2nd TCH Science Days: PhD & Postdoc Day: Book of Abstracts (pp. 30–30). http://hdl.handle.net/20.500.12708/204668 ( reposiTUm)

Kojic, D., Steinbauer, P., Slezak, P., Redl, H., & Baudis, S. (2024). Unlocking Potential: Ternary thiol-ene systems as clinically promising bone adhesives. In Abstract Book AFPM:  Advanced Functional Polymers for Medicine 2024 (pp. 47–47). http://hdl.handle.net/20.500.12708/211197 ( reposiTUm)

Fantoni, A., Koch, T., Liska, R., & Baudis, S. (2023). Synthesis and Characterization of Homogeneous Epoxy Networks: Development of a Sustainable Material Platform Using Epoxy-Alcohol Polyaddition. In Polymer Meeting 15 Book of Abstracts (pp. 131–131). ( reposiTUm)

Haslinger, C., Leutgeb, L. P., Mitterbauer, M., Baudis, S., & Liska, R. (2023). Recent Developments of long Wavelength Photoinitiators for Radical Polymerization. In RadTech Europe 2023 : Abstract Book (pp. 92–92). http://hdl.handle.net/20.500.12708/192904 ( reposiTUm)

Ableidinger, K., Ehrmann, K., Fitzka, M., Baudis, S., & Liska, R. (2023). Dynamic Thermoplastic Polyurethane Ureas as Self-Reinforcing and Biodegradable Materials. In Polymer Meeting 15 : Book of Abstracts (pp. 107–107). Polymer Institute of the Slovak Academy of Sciences. ( reposiTUm)

Kojic, D., Ehrmann, K., Wolff, R., Mete, Y. D., Koch, T., Stampfl, J., Baudis, S., & Liska, R. (2023). 3D-Printing of Degradable Polyether-esters via Cationic Ring-Opening Polymerization of Spirocyclic Compounds. In RadTech Europe 2023 : Abstract Book (pp. 21–21). http://hdl.handle.net/20.500.12708/192340 ( reposiTUm)

Ehrmann, K., Fitzka, M., Ableidinger, K., Berk, O., Baudis, S., & Liska, R. (2023). Self reinforcing yet biodegradable materials for highly porous prostheses. In IUPAC-Chains 23: Book of abstracts (pp. 99–99). http://hdl.handle.net/20.500.12708/193603 ( reposiTUm)

Fitzka, M., Berk, O., Liska, R., & Baudis, S. (2023). Development of photopolymerizable precursors for self-reinforcing networks for 3D printing. In Polymer Meeting 15 : Book of Abstracts (pp. 104–104). Polymer Institute of the Slovak Academy of Sciences. ( reposiTUm)

Fantoni, A., Lunzer, M., Baudis, S., Ovsianikov, A., & Liska, R. (2023). STIMULI-RESPONSIVE BIOMATERIALS: ENABLING THE SPATIOTEMPORAL MICROPATTERNING OF PHOTORESPONSIVE HYDROGELS VIA DISULFIDE-BASED LINKERS. In Polymer Meeting 15 Book of Abstracts. Polymer Meeting 15, Bratislava, Slovakia. ( reposiTUm)

Haslinger, C., Fitzka, M., Berk, O., Zahoranova, A., & Baudis, S. (2023). Synthesis of Ultrasound-Responsive Hydrogels Based on Poly(2-Oxazoline)S as Drug Delivery System and their Sonoreological Investigation. In Polymer Meeting 15 : Book of Abstracts (pp. 193–193). Polymer Institute of the Slovak Academy of Sciences. ( reposiTUm)

Fantoni, A., Koch, T., Liska, R., & Baudis, S. (2023). Towards High-Performance Thermosets from Renewable Resources: Development of a Sustainable Material Platform using Epoxy-Alcohol Polyaddition. In RadTech Europe Conference and Exhibition 2023 : Abstract Book (pp. 75–75). ( reposiTUm)

Mayer, F., Haslinger, C., Leutgeb, L. P., Haas, M., Baudis, S., & Liska, R. (2023). Novel Radical Photoinitiators Based on Germanium with Long Wavelength Absorption for High Curing Depth. In Polymer Meeting 15 : Book of Abstracts (pp. 185–185). Polymer Institute of the Slovak Academy of Sciences. http://hdl.handle.net/20.500.12708/192902 ( reposiTUm)

Ehrmann, K., Fitzka, M., Ableidinger, K., Bergmeister, H., Baudis, S., & Liska, R. (2023). Self-strengthening thermoplastic polyurethanes for highly porous biodegradable small-diameter vascular grafts. In EUPOC 2023 - Dynamic Polymer Networks : Booklet of Abstracts (pp. 58–58). http://hdl.handle.net/20.500.12708/193604 ( reposiTUm)

Keck, S., Liske, O., Seidler, K., Steyrer, B., Gorsche, C., Knaus, S., & Baudis, S. (2021). Lignin-Based Photopolymers For 3d Printing. In vESPS 2021 (p. 120). http://hdl.handle.net/20.500.12708/49601 ( reposiTUm)

Haslinger, C., Zahoranova, A., Liska, R., & Baudis, S. (2021). Photocrosslinking Of Coumarin-Modified Poly(2-Oxazoline)s. In vESPS 2021 (p. 197). http://hdl.handle.net/20.500.12708/49602 ( reposiTUm)

Steinbauer, P., Sinawehl, L., Liska, R., & Baudis, S. (2021). Photopolymerizable Adhesives For Bone Fracture Fixation. In vESPS 2021 (p. 126). http://hdl.handle.net/20.500.12708/49565 ( reposiTUm)

Baudis, S. (2021). Advanced Biocompatible Photopolymers For Biomedical Applications. In vESPS 2021 (p. 74). http://hdl.handle.net/20.500.12708/49580 ( reposiTUm)

Schmidbauer, A., Reichsöllner, R., Puljic, A., Hackethal, J., Redl, H., & Baudis, S. (2021). Neovascularization Stimulating Hydrogels for Regenerative Medicine. In Book of Abstract (p. 1556). http://hdl.handle.net/20.500.12708/50838 ( reposiTUm)

Baudis, S. (2021). Synthetic, biocompatible polymers for additively manufactured tissue regeneration scaffolds. In Euromat 2021 -European Congress And Exhibition On Advanced Materials And Processes (p. 336). http://hdl.handle.net/20.500.12708/50823 ( reposiTUm)

Baudis, S. (2021). 3D-Printing - bone replacement implants. In European Society of Head and Neck Radiology - 33rd Meeting and Refresher Course. European Society of Head and Neck Radiology - 33rd Meeting and Refresher Course, Unknown. https://doi.org/10.26226/morressier.60dc8095e537565438d6bfa3 ( reposiTUm)

Steinbauer, P., Kotmel, J., Rohatschek, A., Andriotis, O. G., Liska, R., Thurner, P. J., & Baudis, S. (2021). Single-Molecule Force Spectroscopy Measurement of natural and biomimetic Adhesion Motifs. In 4th International Conference on Biological and Biomimetic Adhesives (p. 66). http://hdl.handle.net/20.500.12708/49635 ( reposiTUm)

Schwarzl, P., Ehrmann, K., Grasl, C., Bergmeister, H., Schima, H., Podesser, B. K., Liska, R., & Baudis, S. (2021). Enhanced Mechanical Properties of Hard-Block Degradable Thermoplastic Polyurethanes for Vascular Tissue Regeneration. In Book of Abstract. TERMIS 6th World Congress, Unknown. http://hdl.handle.net/20.500.12708/49669 ( reposiTUm)

Rebers, L., Reichsöllner, R., Gurmann, T., Regett, S., Tovar, G., Borchers, K., Baudis, S., & Southan, A. (2021). The Role Of Physical Cross-Links In Chemical Cross-Linking Of Gelatin Methacryloyl Hydrogels. In vESPS 2021 (p. 196). http://hdl.handle.net/20.500.12708/49629 ( reposiTUm)

Schmidbauer, A., Reichsöllner, R., Puljic, A., Hackethal, J., Redl, H., & Baudis, S. (2021). Photohydrogels Promoting Neovascularization For Regeneratve Medicine. In vESPS 2021 (p. 124). http://hdl.handle.net/20.500.12708/49642 ( reposiTUm)

Ricke, A., Dellago, B., Ehrmann, K., Liska, R., & Baudis, S. (2021). Photopolymerizable And Degradable Biomaterials Based On Acetal Moieties. In vESPS 2021 (p. 151). http://hdl.handle.net/20.500.12708/49641 ( reposiTUm)

Dellago, B., Orman, S., Liska, R., & Baudis, S. (2021). Toughness- and Degradability Enhancers for Photopolymers as Bone Replacement Materials. In vESPS 2021 (p. 119). http://hdl.handle.net/20.500.12708/49639 ( reposiTUm)

Baudis, S. (2021). Additive-Manufactured Polymer-based Biomaterials for Regenerative Medicine. In C. Slugovc & G. Trimmel (Eds.), Polymer Meeting 14 Book of Abstracts (p. 34). Verlag der Technischen Universität Graz. http://hdl.handle.net/20.500.12708/49645 ( reposiTUm)

Steinbauer, P., Sinawehl, L., Liska, R., & Baudis, S. (2021). High-performance photocurable adhesives for bone repair. In C. Slugovc & G. Trimmel (Eds.), Polymer Meeting 14 Book of Abstracts (p. 57). Verlag der Technischen Universität Graz. http://hdl.handle.net/20.500.12708/49650 ( reposiTUm)

Baudis, S. (2020). 3D Druck von Knochen. In SCIENCE - das Wissenschaftsprogramm der VHS; Welche Wirkstoffe haben Zukunft? (p. 49). http://hdl.handle.net/20.500.12708/49608 ( reposiTUm)

Steinbauer, P., Orman, S., Hofstetter, C., Schwentenwein, M., Russmüller, G., Stampfl, J., Liska, R., & Baudis, S. (2020). Patient-specific biocompatible polymer scaffolds for bone tissue regeneration. In 2020 TERMIS EU Abstracts (p. 308). e Cells und Materials. http://hdl.handle.net/20.500.12708/50786 ( reposiTUm)

Ehrmann, K., Grasl, C., Bergmeister, H., Schima, H., Podesser, B. K., Liska, R., & Baudis, S. (2020). Reconciling Contradicting Properties: Strong Biodegradable Thermoplastic Polyurethanes for Electrospun Small-Diameter Vascular Grafts. In 11th World Biomaterials Congress (p. 1). 11th World Biomaterials Congress. http://hdl.handle.net/20.500.12708/50807 ( reposiTUm)

Reichsöllner, R., Puljic, A., Ehrmann, K., Hackethal, J., Redl, H., & Baudis, S. (2020). Gelatin Photo-Hydrogels as Material Platform for Tissue Regeneration. In 11th World Biomaterials Congress (p. 1). http://hdl.handle.net/20.500.12708/50808 ( reposiTUm)

Ehrmann, K., Grasl, C., Schima, H., Baudis, S., Liska, R., Podesser, B. K., & Bergmeister, H. (2020). Bottom-up design of materials boosts long term performance of small-diameter biodegradable vascular prostheses: an in-vivo proof. In ESSR 2020 (p. 1). http://hdl.handle.net/20.500.12708/49633 ( reposiTUm)

Steinbauer, P., Orman, S., Hofstetter, C., Schwentenwein, M., Russmüller, G., Stampfl, J., Liska, R., & Baudis, S. (2020). Biocompatible photopolymer scaffolds tailored for patient specific solutions for bone tissue regeneration. In 11th World Biomaterials Congress (p. 1). http://hdl.handle.net/20.500.12708/49621 ( reposiTUm)

Reichsöllner, R., Orman, S., Hofstetter, C., Schwentenwein, M., Russmüller, G., Stampfl, J., Liska, R., & Baudis, S. (2019). 3D-printed, tough and biocompatible photopolymers for in vivo bone tissue regeneration. In Termis EU 2019 (p. 1625). http://hdl.handle.net/20.500.12708/50483 ( reposiTUm)

Steinbauer, P., Rohatschek, A., Andriotis, O. G., Thurner, P. J., Liska, R., & Baudis, S. (2019). Adhesion Forces of selected Bone-binding Motifs determined via Single Molecule Force Spectroscopy. In Termis Eu 2019 (p. 1248). http://hdl.handle.net/20.500.12708/50495 ( reposiTUm)

Helfert, S., Hellmeier, J., Sevcsik, E., Liska, R., & Baudis, S. (2019). Tailor-made biointerfaces on oxidic substrates via polymer brushes. In Termis EU 2019 (p. 1338). http://hdl.handle.net/20.500.12708/50496 ( reposiTUm)

Baudis, S. (2019). Medical Devices based on Additive Manufactured Biomaterials. In 18. Österreichische Chemietage (p. 26). http://hdl.handle.net/20.500.12708/50533 ( reposiTUm)

Keck, S., Liske, O., Gorsche, C., Steyrer, B., Baudis, S., & Knaus, S. (2019). Lignin - alternative renewable resource for 3D printing based on photopolymers. In 18. Österreichische Chemietage (p. 26). http://hdl.handle.net/20.500.12708/50535 ( reposiTUm)

Hofecker, A., Orman, S., Knaack, P., Baudis, S., & Liska, R. (2019). Low toxic monomers for 3D printing photopolymer-based bone substitutes. In European Polymer Congress 2019 (EPF 2019) (p. 848). http://hdl.handle.net/20.500.12708/50492 ( reposiTUm)

Ehrmann, K., Grasl, C., Bergmeister, H., Schima, H., Podesser, B. K., Liska, R., & Baudis, S. (2019). Modular Design Principle for Personalized Artificial Vascular Grafts with Tunable Mechanical Properties and Degradation Speeds. In Termis EU 2019 (p. 1112). http://hdl.handle.net/20.500.12708/50494 ( reposiTUm)

Baudis, S. (2019). Additive Manufactured Polymer-based Biomaterials. In Advanced Functional Polymers for Medicine 2019 (p. 12). http://hdl.handle.net/20.500.12708/50493 ( reposiTUm)

Rohatschek, A., Andriotis, O. G., Steinbauer, P., Baudis, S., Dworak, C., & Thurner, P. J. (2019). Experimental Mechanics of Individual Collagen Molecules. In Book of Abstracts of the 25th Congress of the European Society of Biomechanics (p. 132). TU Verlag. http://hdl.handle.net/20.500.12708/67991 ( reposiTUm)

Dellago, B., Liska, R., & Baudis, S. (2019). Acetal Moieties as Biodegradable Functionality in Photopolymers for Bone Regeneration. In Tagungsband_VSS2019_1906042202 (pp. 120–121). http://hdl.handle.net/20.500.12708/50713 ( reposiTUm)

Zigon-Branc, S., Markovic, M., Van Hoorick, J., Van Vlierberghe, S., Dubruel, P., Zerobin, E., Baudis, S., & Ovsianikov, A. (2019). Impact of hydrogel stiffness on differentiation of human adipose-derived stem cell microspheroids. In TERMIS EU 2019 Conference Book (p. 1414). http://hdl.handle.net/20.500.12708/68065 ( reposiTUm)

Steinbauer, P., Rohatschek, A., Andriotis, O. G., Liska, R., Thurner, P. J., & Baudis, S. (2018). Adhesion motifs for bone glue applications. In Austrian Bone Conference - ABC 2018 (p. 454). Wiener Medizinische Wochenschrift; Springer-Verlag Austria. http://hdl.handle.net/20.500.12708/49568 ( reposiTUm)

Ehrmann, K., Seidler, K., Potzmann, P., Dworak, C., Koch, T., Bergmeister, H., Grasl, C., Schima, H., Liska, R., Podesser, B. K., & Baudis, S. (2018). Thermopastic Polyurethanes and their Application as Electrospun Biodegradable Soft Tissue Medical Prosthesis. In VSS 2018 (pp. 110–111). Book-of-Abstracts.com. http://hdl.handle.net/20.500.12708/50178 ( reposiTUm)

Zerobin, E., Steiger, W., Markovic, M., Baudis, S., Ovsianikov, A., & Liska, R. (2018). Molecular Design Towards Novel Photo-Initiators with Increased Two-Photon Absorption Cross Section. In VSS 2018 (pp. 106–107). Book-of-Abstracts.com. http://hdl.handle.net/20.500.12708/50177 ( reposiTUm)

Steinbauer, P., Rohatschek, A., Andriotis, O. G., Baudis, S., Thurner, P. J., & Liska, R. (2018). Raft Polymers as Adhesion Motifs for Bone Glue Applications. In VSS 2018 (pp. 108–109). Book-of-Abstracts.com. http://hdl.handle.net/20.500.12708/50175 ( reposiTUm)

Helfert, S., Hellmeier, J., Sevcsik, E., Liska, R., & Baudis, S. (2018). Tailor-made Polymer Interfaces - Surfaces on Demand. In VSS 2018 (pp. 84–85). Book-of-Abstracts.com. http://hdl.handle.net/20.500.12708/50176 ( reposiTUm)

Orman, S., Hofstetter, C., Reinauer, F., Aksu, A., Liska, R., & Baudis, S. (2018). PCL based toughness enhancers for photopolymer based bone substitutes. In 5th European Symposium of Photopolymer Science (p. 10). 5th European Symposium of Photopolymer Science. http://hdl.handle.net/20.500.12708/50273 ( reposiTUm)

Zerobin, E., Tromayer, M., Dobos, A., Steiger, W., Markovic, M., Baudis, S., Ovsianikov, A., & Liska, R. (2018). Promoting Initiation-Efficiency and Biocompatibility of Two-Photon Initiators by the Introduction of Photolabile Moieties. In BSTE 2018: Next Generation Tissue Engineering (p. PO43). http://hdl.handle.net/20.500.12708/50323 ( reposiTUm)

Zerobin, E., Tromayer, M., Dobos, A., Steiger, W., Markovic, M., Baudis, S., Ovsianikov, A., & Liska, R. (2018). Molecular Design towards Two-Photon Initiators with Reduced Phototoxicity. In 5th European Symposium of Photopolymer Science (p. P50). 5th European Symposium of Photopolymer Science. http://hdl.handle.net/20.500.12708/50316 ( reposiTUm)

Zigon-Branc, S., Markovic, M., Van Hoorick, J., Andriotis, O. G., Zerobin, E., Baudis, S., Thurner, P. J., Dubruel, P., Van Vlierberghe, S., & Ovsianikov, A. (2018). 3D Differentiation of human Adipose-derived stem cells/hTERT in Methacrylate Gelatin Hydrogels with Different Stiffness. In Abstract Book (p. 603). http://hdl.handle.net/20.500.12708/67828 ( reposiTUm)

Stanic, S. D., Altun, A. A., Reicharlzeder, D., Schwentenwein, M., Baudis, S., Stampfl, J., & Liska, R. (2017). Highly Filled Hydrogels as Biocomposites and Ceramic Precursors for 3D Printing Aplications. In Danube Vltava Sava Polymer Meeting 2017 (p. PO-24). Book of Abstracts.com. http://hdl.handle.net/20.500.12708/49897 ( reposiTUm)

Vojtova, L., Habankova, E., Michlovska, L., Liska, R., Jancar, J., & Baudis, S. (2017). Hybrid Hydrogel’s Network Formed by Photogelation of Thermosensitive Macromonomer in Aquateous Environment. In Danube Vltava Sava Polymer Meeting 2017 (p. PO-28). Book of Abstracts.com. http://hdl.handle.net/20.500.12708/49899 ( reposiTUm)

Heinze, M., Pospiech, D., Voit, B., Baudis, S., Liska, R., Naumova, A., & Saalwächter, K. (2017). Influence of Preparation Conditions on the Structure of Photocrosslinked Solvogels. In Danube Vltava Sava Polymer Meeting 2017 (p. PO-36). Book of Abstracts.com. http://hdl.handle.net/20.500.12708/49900 ( reposiTUm)

Reichsöllner, R., Qin, X., Labuda, K., Chen, J., Hruschka, V., Khadem, A., Baudis, S., Liska, R., Redl, H., & Slezak, P. (2017). Novel, Bio-Compatible Peptide-Conjugates for Hemostasis. In Danube Vltava Sava Polymer Meeting 2017 (p. PO-89). Book of Abstracts.com. http://hdl.handle.net/20.500.12708/49906 ( reposiTUm)

Baudis, S., Zerobin, E., Lunzer, M., Tomasikova, Z., Qin, X., Markovic, M., Gruber, P., Stampfl, J., Ovsianikov, A., & Liska, R. (2017). Microfabricated Biocompatible Hydrogels. In VSS 2017 (p. 11). http://hdl.handle.net/20.500.12708/49862 ( reposiTUm)

Liske, O., Dorfinger, P., Gmeiner, R., Baudis, S., Stampfl, J., Liska, R., & Knaus, S. (2017). UV Curable Materials from Tailored Lignin (Meth)Acrylates. In Danube Vltava Sava Polymer Meeting 2017 (p. PO-19). Book of Abstracts.com. http://hdl.handle.net/20.500.12708/49896 ( reposiTUm)

Gorsche, C., Reghunathan, H., Baudis, S., Knaack, P., Husar, B., Laeuger, J., Hoffmann, H., & Liska, R. (2017). Real Time Monitoring of Photopolymerization Reactions via NIR/MIR-Photorheology. In Danube Vltava Sava Polymer Meeting 2017 (p. OP-72). Book of Abstracts.com. http://hdl.handle.net/20.500.12708/49916 ( reposiTUm)

Orman, S., Gorsche, C., Hofstetter, C., Baudis, S., Stampfl, J., & Liska, R. (2017). Photorheometer with RT-FTIR Coupling as Innovativ Tool to Assess Photopolymers for 3D Printing. In Danube Vltava Sava Polymer Meeting 2017 (p. PO 44). Book of Abstracts. http://hdl.handle.net/20.500.12708/49893 ( reposiTUm)

Baudis, S., Bergmeister, H., Ehrmann, K., Dworak, C., Grasl, C., & Liska, R. (2017). Enhancement of Mechanical Properties of Biogradable Thermoplastic Polyurethane Polymers for Their Application as Artificial Blood Vessel. In Danube Vltava Sava Polymer Meeting 2017 (p. PO-7). Book of Abstracts.com. http://hdl.handle.net/20.500.12708/49894 ( reposiTUm)

Baudis, S., Ovsianikov, A., Stampfl, J., & Liska, R. (2017). 3D Printed Biocompatible Polymers. In Danube Vltava Sava Polymer Meeting 2017 (p. OP-30). Book of Abstracts.com. http://hdl.handle.net/20.500.12708/49912 ( reposiTUm)

Zerobin, E., Tromayer, M., Gruber, P., Markovic, M., Baudis, S., Stampfl, J., Ovsianikov, A., & Liska, R. (2017). Two-Photon Initiator Development and Hydrogel Networks Based on Hyaluronic Acid. In Danube Vltava Sava Polymer Meeting 2017 (p. OP-32). Book of Abstracts.com. http://hdl.handle.net/20.500.12708/49913 ( reposiTUm)

Baudis, S. (2017). 3D Printing of Advanced Photopolymers in Tissue Engineering. In Abstract Book ESAO and IFAO 2017 (p. 30). The International Journal of Artificial Organs. http://hdl.handle.net/20.500.12708/49923 ( reposiTUm)

Baudis, S., Zerobin, E., Lunzer, M., Tromayer, M., Markovic, M., Gruber, P., Stampfl, J., Ovsianikov, A., & Liska, R. (2017). Macromolecular Photochemistry: A Toolbox to Control the Micro-Environment of Cells. In 17. Österreichische Chemietage 2017 (p. OP-29). http://hdl.handle.net/20.500.12708/49925 ( reposiTUm)

Baudis, S., & Gmeiner, R. (2017). 3DFabBio - Maßgeschneiderte 3D gefertigte Produkte aus bio-basierten erneuerbaren Rohstoffen. In Stakeholderdialog: Biobased Industry (p. 1). http://hdl.handle.net/20.500.12708/50011 ( reposiTUm)

Liske, O., Dorfinger, P., Gmeiner, R., Baudis, S., Stampfl, J., Liska, R., & Knaus, S. (2017). UV curable materials for 3D printing based on renewable resources. In RadTech Europe Conference & Exhibition 2017 (p. 71). http://hdl.handle.net/20.500.12708/49946 ( reposiTUm)

Gorsche, C., Reghunathan, H., Baudis, S., Knaack, P., Husar, B., Laeuger, J., Hoffmann, H., & Liska, R. (2017). In situ investigation of photopolymerization reactions via real time-NIR/MIR-photorheology. In RadTech Europe Conference & Exhibition 2017 (p. 11). http://hdl.handle.net/20.500.12708/49948 ( reposiTUm)

Zerobin, E., Tromayer, M., Gruber, P., Markovic, M., Baudis, S., Stampfl, J., Ovsianikov, A., & Liska, R. (2017). Newly Developed Hydrogel Precursors and Two-Photon Initiators Based on Hyaluronic Acid. In AMBA 2017, Advanced Materials for Biomedical Applications (p. 62). http://hdl.handle.net/20.500.12708/49908 ( reposiTUm)

Stanic, S. D., Baudis, S., Schwentenwein, M., & Liska, R. (2017). 3D printing of filled hydrogels as ceramic precursors and biocomposites. In Bypos Workshop Book 2017 (p. 31). http://hdl.handle.net/20.500.12708/49880 ( reposiTUm)

Liske, O., Dorfinger, P., Gmeiner, R., Baudis, S., Stampfl, J., Liska, R., & Knaus, S. (2017). Modification of Wheat Straw Soda Lignin for Light-Induced Radical Polymerization Process. In Bypos Workshop Book 2017 (p. 55). http://hdl.handle.net/20.500.12708/49859 ( reposiTUm)

Baudis, S., Zerobin, E., Lunzer, M., Tromayer, M., Markovic, M., Gruber, P., Stampfl, J., Ovsianikov, A., & Liska, R. (2017). Controlling the Micro-Environment of Cells by Exploitation of Macromolecular Photochemistry. In Advanced Polymers via Macromolecular Engineering (p. 91). http://hdl.handle.net/20.500.12708/49811 ( reposiTUm)

Orman, S., Gorsche, C., Hofstetter, C., Baudis, S., Stampfl, J., & Liska, R. (2017). Biocompatible Photopolymers with Improved Impact Resistance for Additive Manufacturing. In Bypos Workshop Book 2017 (p. 53). http://hdl.handle.net/20.500.12708/49860 ( reposiTUm)

Baudis, S. (2017). Lithography-based 3D printing of biocompatible polymers. In CEITEC PhD RETREAT II (pp. 14–15). Masaryk University, Brünn, Tschechien. http://hdl.handle.net/20.500.12708/49786 ( reposiTUm)

Orman, S., Mautner, A., Baudis, S., Russmüller, G., Schwentenwein, M., & Liska, R. (2016). Additive Manufactured Vinyl Ester-based Photopolymers with Improved Impact Resistance. In ESPS 2016 (p. P-42). http://hdl.handle.net/20.500.12708/49336 ( reposiTUm)

Zerobin, E., Baudis, S., Tomasikova, Z., Qin, X., Markovic, M., Gruber, P., Stampfl, J., Ovsianikov, A., & Liska, R. (2016). Micro fabrication of hydrogels based on hyaluronic acid. In BYPoS Workshop book (p. 107). book of abstracts. http://hdl.handle.net/20.500.12708/49264 ( reposiTUm)

Liske, O., Baudis, S., & Knaus, S. (2016). Post-modification of wheat straw soda lignin for light-induced radical polymerization process. In ESPS 2016 (p. P-67). http://hdl.handle.net/20.500.12708/49347 ( reposiTUm)

Zerobin, E., Baudis, S., Tomasikova, Z., Qin, X., Markovic, M., Gruber, P., Stampfl, J., Ovsianikov, A., & Liska, R. (2016). High Resolved Biocompatible Hydrogel Constructs based on Hyaluronic Acid. In ESPS 2016 (p. P-34). http://hdl.handle.net/20.500.12708/49356 ( reposiTUm)

Baudis, S., Tomasikova, Z., Zerobin, E., Qin, X., Markovic, M., Gruber, P., Stampfl, J., Ovsianikov, A., & Liska, R. (2016). Laser-microfabricated, biocompatible hydrogels based on hyaluronan. In European Cells&Materials Journal (p. 454). European Cells&Materials Journal. http://hdl.handle.net/20.500.12708/49305 ( reposiTUm)

Baudis, S., Tomasikova, Z., Zerobin, E., Qin, X., Gruber, P., Markovic, M., Stampfl, J., Ovsianikov, A., & Liska, R. (2016). Additive Manufactured, Biocompatible Hydrogels based on Hyaluronic Acid. In Book of Abstracts (p. 2728). http://hdl.handle.net/20.500.12708/49322 ( reposiTUm)

Baudis, S., Bomze, D., Lunzer, M., Stampfl, J., Ovsianikov, A., & Liska, R. (2016). Poly(vinyl alcohol) based hydrogels for 3D biomaterial constructs. In Book of Abstracts (p. 2693). http://hdl.handle.net/20.500.12708/49323 ( reposiTUm)

Potzmann, P., Baudis, S., Dworak, C., Bergmeister, H., Schima, H., & Liska, R. (2015). Thermoplastic Polyurethane Elastomers. In 79th Prague Meeting on Macromolecules. 79PMM, Prague, Czechia. http://hdl.handle.net/20.500.12708/49030 ( reposiTUm)

Baudis, S., Tomasikova, Z., Knaack, P., Qin, X., Stampfl, J., Ovsianikov, A., & Liska, R. (2015). A Thiol-Ene based Modular Material System with Hyaluronic Acid Building Blocks. In Abstract USB. Photopolymerization Fundamentals 2015, Boulder, United States of America (the). http://hdl.handle.net/20.500.12708/49038 ( reposiTUm)

Ligon, S., Baudis, S., Seidler, K., Grasl, C., Schima, H., Bergmeister, H., & Liska, R. (2012). Mechanically flexible and controllably degradable electrospun thermoplastic polyurethanes for vascular prostheses. In E-Mrs 2012 Fall Meeting. E-MRS 2012 FALL MEETING (European Materials research Society), Warschau, EU. http://hdl.handle.net/20.500.12708/48048 ( reposiTUm)

Ligon, S., Husar, B., Baudis, S., Seidler, K., Weigel, G., Grasl, C., Bergmeister, H., & Liska, R. (2012). Ester based thermoplastic polyurethanes for electrospun vascular prostheses. In Journal of Tissue Engineering and Regenerative Medicine 2012 (p. 146). John Wiley & Sons, Ltd. http://hdl.handle.net/20.500.12708/48056 ( reposiTUm)

Ligon, S., Baudis, S., Nehl, F., Mautner, A., Husar, B., Schwentenwein, M., Wilke, A., Stampfl, J., Russmüller, G., & Liska, R. (2012). Biocompatible monomers for photo-based additive manufacturing technologies. In MSE Programme (p. 62). http://hdl.handle.net/20.500.12708/66593 ( reposiTUm)

Seyidova, N., Grasl, C., Stoiber, M., Schreiber, C., Walter, I., Seidler, K., Ligon, S., Baudis, S., Liska, R., Bernhard, D., Schima, H., & Bergmeister, H. (2012). Elastomeric, nanostructured, biodegradable vascular grafts for small-diamter vascular replacement. In BioNanoMed 2012. BioNanoMed 2012, Krems, Austria. http://hdl.handle.net/20.500.12708/48073 ( reposiTUm)

Seyidova, N., Grasl, C., Stoiber, M., Schreiber, C., Walter, I., Seidler, K., Ligon, S., Baudis, S., Liska, R., Bernhard, D., Schima, H., & Bergmeister, H. (2012). Biocompatibility evaluation of bioresorbable substitutes. In ISACB´S Biennal Meeting 2012 - Programm (p. 49). http://hdl.handle.net/20.500.12708/48068 ( reposiTUm)

Bergmeister, H., Grasl, C., Stoiber, M., Schreiber, C., Seyidova, N., Kapeller, B., Walter, I., Seidler, K., Ligon, S., Baudis, S., Liska, R., & Schima, H. (2012). Nanostructured, bioresorbable vascular substitutes. In Abstracts. 5#^{th} Biomaterialsymposium, Vienna, Austria. http://hdl.handle.net/20.500.12708/48074 ( reposiTUm)

Liska, R., Schwentenwein, M., Baudis, S., Ligon, S., Mautner, A., Gugg, A., Li, Z., Gorsche, C., Pucher, N. U., Torgersen, J., Nehl, F., Bergmeister, H., Macfelda, K., Koch, T., Russmüller, G., & Stampfl, J. (2011). 3D-Printing of Advanced Biomaterials by Additive Manufacturing Technologies. In IUPAC 9#^{th} International Conference on Advanced Polymers via Macromolecular Engineering (APME 2011) - Program and Abstract Book (p. 101). http://hdl.handle.net/20.500.12708/47670 ( reposiTUm)

Baudis, S., Nehl, F., Ligon, S., Wutzel, H., Nigisch, A., Bergmeister, H., Bernhard, D., Stampfl, J., & Liska, R. (2011). Urethane-based photoelastomers with defined cellular struchture for scaffold-based vascular tissue engineering. In IUPAC 9#^{th} International Conference on Advanced Polymers via Macromolecular Engineering (APME 2011) - Program and Abstract Book (p. 148). http://hdl.handle.net/20.500.12708/47673 ( reposiTUm)

Schwentenwein, M., Baudis, S., Nehl, F., Ligon, S., Nigisch, A., Bergmeister, H., Blümel, A., Grogger, W., Bernhard, D., Stampfl, J., & Liska, R. (2011). Elastomeric Photopolymers by Thiol-ene Polymerization for Vascular Tissue Engineering. In The International Journal of Artificial Organs (p. 679). Wichtig Editore. http://hdl.handle.net/20.500.12708/47481 ( reposiTUm)

Seidler, K., Ligon, S., Baudis, S., Koch, T., Stampfl, J., & Liska, R. (2011). Biodegradable Thermoplastic Polyurethanes: Synthesis and Characterization of Improved TPUs. In The International Journal of Artificial Organs (p. 692). Wichtig Editore. http://hdl.handle.net/20.500.12708/47478 ( reposiTUm)

Baudis, S., Grasl, C., Bergmeister, H., Arras, M., Winter, B., Schima, H., & Liska, R. (2011). Desing of(Bio)degradable Thermoplastic Urethane-Elastomers for Electrospun Vascular Grafts. In ESAO-ASAIO Winter School (p. 33). http://hdl.handle.net/20.500.12708/47473 ( reposiTUm)

Ligon, S., Baudis, S., Seidler, K., Grasl, C., Schima, H., Bergmeister, H., Weigel, G., Bernhard, D., & Liska, R. (2011). Assessment of Aliphatic Thermoplastic Polyurethanes for Narrow Diameter Vascular Grafts. In The International Journal of Artificial Organs (p. 645). Wichtig Editore. http://hdl.handle.net/20.500.12708/47482 ( reposiTUm)

Ligon, S., Dworak, C., Baudis, S., Nehl, F., Wilhelm, H., Bergmeister, H., Bernhard, D., Stampfl, J., & Liska, R. (2011). Tailor-made Biomaterials for Vascular Tissue Regeneration printed by Additive Manufacturing Technologies. In Ninth International Symposium on Frontiers in Biomedical Polymers (pp. 87–88). http://hdl.handle.net/20.500.12708/47469 ( reposiTUm)

Wilke, A., Baudis, S., Wilhelm, H., Bergmeister, H., Nehl, F., Liska, R., & Stampfl, J. (2011). Additive Manufactured Photoelastomers as Tailor-made Biomaterials for Vascular Tissue Restoration. In Euromat 2011 Montpellier (pp. 0264-1–1). http://hdl.handle.net/20.500.12708/66409 ( reposiTUm)

Ovsianikov, A., Nehl, F., Baudis, S., Steyrer, B., Liska, R., & Stampfl, J. (2011). Microenvironments for the Generation of Bioartificial Tissues. In 24th European Conference on Biomaterials (p. 97). http://hdl.handle.net/20.500.12708/66414 ( reposiTUm)

Baudis, S., Wilhelm, H., Bergmeister, H., Stampfl, J., & Liska, R. (2010). Additive Manufactured Photoelastomers as Tailor-made Biomaterials for Vascular Tissue Restoration. In European Symposium of Photopolymer Science - Abstract Book. European Symposium of Photopolymer Science, Mulhouse, France, EU. http://hdl.handle.net/20.500.12708/47183 ( reposiTUm)

Nehl, F., Baudis, S., Wilhelm, H., Bergmeister, H., Stampfl, J., & Liska, R. (2010). Mechanical Characterisation of Photoelastomers for Vascular Tissue Regeneration. In European Symposium of Photopolymer Science - Abstract Book. European Symposium of Photopolymer Science, Mulhouse, France, EU. http://hdl.handle.net/20.500.12708/47187 ( reposiTUm)

Baudis, S., Grasl, C., Bergmeister, H., Schima, H., Stampfl, J., & Liska, R. (2010). (Bio)abbaubare Urethan-Elastomere für Elektroversponnene Blutgefäßersatzmaterialien. In Tagungsband (p. 7). http://hdl.handle.net/20.500.12708/47191 ( reposiTUm)

Baudis, S., Grasl, C., Bergmeister, H., Arras, M., Winter, B., Schima, H., & Liska, R. (2010). (bio)degradable Urethane-Elastomers For Electrospun Vascular Grafts. In The International Journal of Artificial Organs Vol. 33/No. 7 (2010 July), Abstracts from the XXXVII ESAO Congress (p. 467). Wichtig Editore. http://hdl.handle.net/20.500.12708/46906 ( reposiTUm)

Baudis, S., & Liska, R. (2010). Two Approaches for the Development of Materials for Vascular Tissue Regeneration. In Proceedings (pp. 271–272). http://hdl.handle.net/20.500.12708/46793 ( reposiTUm)

Baudis, S., Wilhelm, H., Bergmeister, H., Stampfl, J., & Liska, R. (2010). Generativ gefertigte Photoelastomere als maßgeschneiderte Biomaterialien für vaskuläre Geweberegeneration. In J. Stampfl (Ed.), Tagungsband (p. 6). http://hdl.handle.net/20.500.12708/66268 ( reposiTUm)

Heller, C., Schwentenwein, M., Baudis, S., Thaler, R., Varga, F., Stampfl, J., & Liska, R. (2009). 3D Fabrication of new poly(vinyl alcohol) based Scaffolds for Tissue Engineering. In Radtech Europe 2009, Proceedings (p. 7). http://hdl.handle.net/20.500.12708/46734 ( reposiTUm)

Liska, R., Bergmeister, H., Baudis, S., Dworak, C., Heller, C., Moszner, N., Porodec, M., Pucher, N. U., Russmüller, G., Schmidt, V., Schulz-Siegmund, M., Schwentenwein, M., Stampfl, J., Varga, F., & Weigel, G. (2009). Monomers and Photoinitiators for Biomedical Applications. In Radtech Europe 2009, Proceedings (p. 8). http://hdl.handle.net/20.500.12708/46728 ( reposiTUm)

Baudis, S., Schwentenwein, M., Pulka, T., Steyrer, B., Wilhelm, H., Weigel, G., Bergmeister, H., Stampfl, J., & Liska, R. (2009). Studies on the mechanical behaviour of Photoelastomers for Vascular Tissue Regeneration. In Radtech Europe 2009, Proceedings (p. 6). http://hdl.handle.net/20.500.12708/46739 ( reposiTUm)

Stampfl, J., Heller, C., Schwentenwein, M., Baudis, S., Varga, F., & Liska, R. (2009). Entwicklung nicht-toxischer Biophotopolymere für die generative Fertigung. In W. Grellmann (Ed.), Tagungsband Deformation und Bruch (p. 4). http://hdl.handle.net/20.500.12708/65924 ( reposiTUm)

Heller, C., Schuster, M., Baudis, S., Turecek, C., Varga, F., Bergmeister, H., Weigel, G., Stampfl, J., & Liska, R. (2008). New Materials for 3D-Scaffolds for Tissue Engineering Applications. In Abstracts from TERMIS-EU 2008 Meeting (p. 761). Tissue Engineering, Part A. http://hdl.handle.net/20.500.12708/46747 ( reposiTUm)

Heller, C., Schwentenwein, M., Baudis, S., Turecek, C., Varga, F., Stampfl, J., & Liska, R. (2008). Polyvinylalkohol basierende Photopolymere für die generative Fertigung von Gerüststrukturen für Tissue Engineering. In 3. Wiener Biomaterialsymposium - Tagungsband (p. 3). http://hdl.handle.net/20.500.12708/65826 ( reposiTUm)

Baudis, S., Schuster, M., Heller, C., Turecek, C., Varga, F., Bergmeister, H., Weigel, G., Stampfl, J., & Liska, R. (2008). Photoelastomere als biokompatible Blutgefäßersatzmaterialien. In 3. Wiener Biomaterialsymposium - Tagungsband (p. 41). http://hdl.handle.net/20.500.12708/65827 ( reposiTUm)

Stampfl, J., Heller, C., Schuster, M., Baudis, S., Homa, J., & Liska, R. (2008). Biofunktionelle Photopolymere für die generative Fertigung. In Tagungsband (p. 4). http://hdl.handle.net/20.500.12708/65745 ( reposiTUm)

Heller, C., Schuster, M., Baudis, S., Turecek, C., Varga, F., Bergmeister, H., Weigel, G., Stampfl, J., & Liska, R. (2008). 3d-Fabrication of Photopolymers as Scaffolds for Tissue Engineering using Rapid Prototyping. In 9#^{th} Austrian Polymer Meeting, Book of Abstracts (p. 10). http://hdl.handle.net/20.500.12708/46175 ( reposiTUm)

Liska, R., Heller, C., Baudis, S., Schuster, M., Turecek, C., Bergmeister, H., Weigel, G., Schulz, M., Stampfl, J., & Varga, F. (2008). Biocompatible and biodegradable Photopolymers for Rapid Prototyping. In International Workshop on Biomacromolecules 2008, Book of Abstracts. International Workshop on Biomacromolecules 2008, Stockholm, S, EU. http://hdl.handle.net/20.500.12708/46173 ( reposiTUm)

Baudis, S., Schuster, M., Heller, C., Turecek, C., Varga, F., Bergmeister, H., Weigel, G., Stampfl, J., & Liska, R. (2008). Flexible, Biocompatible Photopolymers as Artificial Vascular Grafts. In 9#^{th} Austrian Polymer Meeting, Book of Abstracts (p. 61). http://hdl.handle.net/20.500.12708/46191 ( reposiTUm)

Liska, R., Schuster, M., Heller, C., Baudis, S., Pucher, N. U., Turecek, C., Schmidt, V., Bergmeister, H., Stampfl, J., Varga, F., & Weigel, G. (2008). New concepts of biocompatible and biodegradable photopolymers. In European Coatings Conference: “MEDICAL COATINGS AND ADHESIVES” Proceedings (pp. 117–127). http://hdl.handle.net/20.500.12708/46160 ( reposiTUm)

Schuster, M., Turecek, C., Varga, F., Weigel, G., Stampfl, J., Inführ, R., Heller, C., Baudis, S., & Liska, R. (2008). Fundamental investigations towards a new bone replacement material containing gelatin photopolymers. In International Workshop on Biomacromolecules 2008, Book of Abstracts. International Workshop on Biomacromolecules 2008, Stockholm, S, EU. http://hdl.handle.net/20.500.12708/46199 ( reposiTUm)

Pucher, N. U., Baudis, S., Heller, C., Schuster, M., Satzinger, V., Schmidt, V., Lichtenegger, H. C., Stampfl, J., & Liska, R. (2008). Fabrication of Biocompatible and Cellular Polymers with Sub-Micrometer Feature Resolution by means of Two-Photon Induced Photopolymerization. In International Workshop on Biomacromolecules 2008, Book of Abstracts. International Workshop on Biomacromolecules 2008, Stockholm, S, EU. http://hdl.handle.net/20.500.12708/46196 ( reposiTUm)

Heller, C., Schwentenwein, M., Baudis, S., Turecek, C., Varga, F., Stampfl, J., & Liska, R. (2008). 3D Fabrication of new poly(vinyl alcohol) based scaffolds for Tissue Engineering and Regeneration. In International Workshop on Biomacromolecules 2008, Book of Abstracts. International Workshop on Biomacromolecules 2008, Stockholm, S, EU. http://hdl.handle.net/20.500.12708/46197 ( reposiTUm)

Baudis, S., Schuster, M., Heller, C., Turecek, C., Varga, F., Bergmeister, H., Weigel, G., Stampfl, J., & Liska, R. (2008). Tailored Photoelastomers as Biocompatible Blood Vessel Substitutes. In International Workshop on Biomacromolecules 2008, Book of Abstracts. International Workshop on Biomacromolecules 2008, Stockholm, S, EU. http://hdl.handle.net/20.500.12708/46200 ( reposiTUm)

Baudis, S., Schuster, M., Heller, C., Turecek, C., Varga, F., Bergmeister, H., Weigel, G., Stampfl, J., & Liska, R. (2007). Flexible, biocompatible Photopolymers as Synthetic Vascular Replacement Materials. In RadTech Europe 2007 - Conference Proceedings (p. 6). http://hdl.handle.net/20.500.12708/65637 ( reposiTUm)

Stampfl, J., Schuster, M., Baudis, S., Lichtenegger, H. C., Liska, R., Turecek, C., & Varga, F. (2007). Biodegradable stereolithography resins with defined mechanical properties. In P. J. Bartolo (Ed.), Virtual and Rapid Manufacturing (pp. 283–288). Taylor and Francis. http://hdl.handle.net/20.500.12708/65585 ( reposiTUm)

Turecek, C., Schuster, M., Baudis, S., Liska, R., Stampfl, J., & Varga, F. (2007). Evaluation of biophotopolymers for bone replacement materials capabe for rapid prototyping. In D. Falkenhagen (Ed.), The International Journal of Artificial Organs, Abstracts of the XXXIV ESAO Congress (p. 723). The International Journal of Artificial Organs. http://hdl.handle.net/20.500.12708/46014 ( reposiTUm)

Baudis, S., Schuster, M., Turecek, C., Bergmeister, H., Weigel, G., Stampfl, J., Varga, F., & Liska, R. (2007). Development of flexible biocompatible photopolymers as artificial vascular replacement materials. In D. Falkenhagen (Ed.), The International Journal of Artificial Organs, Abstracts of the XXXIV ESAO Congress (p. 705). The International Journal of Artificial Organs. http://hdl.handle.net/20.500.12708/46004 ( reposiTUm)

Tytgat, L., Baudis, S., Ottevaere, H., Liska, R., Thienpont, H., Dubruel, P., & Van Vlierberghe, S. (2018). Photopolymerizable Materials for Cell Encapsulation. In 3D Printing and Biofabrication (pp. 353–396). Springer Nature Switzerland AG. Part of Springer Nature. https://doi.org/10.1007/978-3-319-45444-3_15 ( reposiTUm)

Fantoni, A., Krauß, J. E. M., Ammann, T., Liska, R., & Baudis, S. (2025, March 6). Novel aliphatic photoinitiators:  Bridging the gap between performance and biocompatibility  for tissue engineering applications [Conference Presentation]. Annual Meeting of the Austrian Cluster for Tissue Regeneration 2025, Wien, Austria. ( reposiTUm)

Nistler, S., Wojcik, T., Baudis, S., Schwentenwein, M., & Stampfl, J. (2025, April 24). Electron Backscatter Diffraction (EBSD) Analysis on Hybrid Bioceramic 3D-printed Parts [Conference Presentation]. The young Ceramists Additive Manufacturing Forum (yCAM 2025), Toulouse, France. http://hdl.handle.net/20.500.12708/216907 ( reposiTUm)

Nistler, S., Hofstetter, C., Baudis, S., Schwentenwein, M., & Stampfl, J. (2025, May 14). Combining Two Different Bioceramic Materials via Sinter-joining [Conference Presentation]. 8th European Symposium on Biomaterials and Related Areas (BioMAT 2025), Weimar, Germany. http://hdl.handle.net/20.500.12708/216904 ( reposiTUm)

Nistler, S., Hofstetter, C., Baudis, S., Schwentenwein, M., & Stampfl, J. (2025, June 6). Sinter-joined bioceramics for hybrid bone implants [Conference Presentation]. Additive Manufacturing Meets Medicine (AMMM 2025), Lübeck, Germany. http://hdl.handle.net/20.500.12708/217085 ( reposiTUm)

Nistler, S., Hofstetter, C., Baudis, S., Schwentenwein, M., & Stampfl, J. (2025, March 7). Hybrid Bioceramic Implants Using Sinter-Joining [Conference Presentation]. Annual Meeting of the Austrian Cluster for Tissue Regeneration 2025, Wien, Austria. http://hdl.handle.net/20.500.12708/217323 ( reposiTUm)

Baudis, S. (2024, October 17). Selbstverstärkende Polymere: Eine neue Generation von Biomaterialien [Conference Presentation]. Inovation Forum Medizintechnik, Tuttlingen, Germany. ( reposiTUm)

Nistler, S., Baudis, S., & Stampfl, J. (2024, October 18). 3D-Druck in der Medizintechnik [Presentation]. Österreich liest, Wien, Austria. ( reposiTUm)

Baudis, S. (2024, April 16). Multivariate analysis of polymeric biomaterials [Conference Presentation]. Meeting of the Austrian Cluster for Tissue Regeneration 2024, Krems, Austria. ( reposiTUm)

Haslinger, C., Liska, R., & Baudis, S. (2024, May). The Future of 3D Printing: Investigation of a Novel Sn-based Photoinitiator with High Stability [Poster Presentation]. Exner Lectures 2024, Wien, Austria. http://hdl.handle.net/20.500.12708/208426 ( reposiTUm)

Kojic, D., Ehrmann, K., Stampfl, J., Baudis, S., & Liska, R. (2024). Exploring novel biodegradable biomaterials: Poly(ether)esters and aliphatic polycarbonates derived from spirocyclic compounds [Presentation]. Annual Meeting of the Austrian Cluster for Tissue Regeneration 2024, Krems an der Donau, Austria. http://hdl.handle.net/20.500.12708/208806 ( reposiTUm)

Nistler, S., Hofstetter, C., Baudis, S., Schwentenwein, M., & Stampfl, J. (2024, May 6). Sinter-joining of Two Different Bioceramic Materials [Conference Presentation]. The young Ceramists Additive Manufacturing Forum (yCAM 2024), Tampere, Finnland, Finland. http://hdl.handle.net/20.500.12708/204673 ( reposiTUm)

Nistler, S., Hofstetter, C., Baudis, S., Schwentenwein, M., & Stampfl, J. (2024, September 25). Sinter-joining of Two Different Bioceramic Materials to Selectively Enhance Bone Implants [Conference Presentation]. Material Science and Engineering MSE 2024, Darmstadt, Germany. http://hdl.handle.net/20.500.12708/204672 ( reposiTUm)

Fantoni, A., Liska, R., & Baudis, S. (2023, May 3). Photoerosion of Hydrogels: An Innovative Method for Tuning the Local Properties of Semi-Interpenetrating Polymer Networks [Conference Presentation]. Annual Conference of the Austrian Cluster for Tissue Regeneration 2023, Linz, Austria. ( reposiTUm)

Ehrmann, K., Fitzka, M., Ableidinger, K., Berk, O., Baudis, S., & Liska, R. (2023, August). Functional group metamorphosis in the condensed state: A self-reinforcing mechanism to increase mechanical performance of thermoplastic polyurethane materials on demand [Conference Presentation]. ACS Fall 2023, San Francisco, United States of America (the). http://hdl.handle.net/20.500.12708/193677 ( reposiTUm)

Dellago, B., Gurmann, T., Altun, A. A., Liska, R., & Baudis, S. (2023). 3D printed bone grafts: Toughness enhancement utilizing PCL-based additives [Poster Presentation]. Tissue Engineering and Regenerative Medicine International Society European Chapter Conference 2023 (TERMIS- EU 2023, Manchester UK), Manchester, United Kingdom of Great Britain and Northern Ireland (the). https://doi.org/10.34726/5183 ( reposiTUm)

Ehrmann, K., Fitzka, M., Berk, O., Liska, R., & Baudis, S. (2023). Self-Reinforcing Polymers – A New Type Of Biomaterials [Poster Presentation]. Tissue Engineering and Regenerative Medicine International Society European Chapter Conference 2023 (TERMIS- EU 2023, Manchester UK), Manchester, United Kingdom of Great Britain and Northern Ireland (the). https://doi.org/10.34726/5225 ( reposiTUm)

Nistler, S., Hofstetter, C., Baudis, S., Schwentenwein, M., & Stampfl, J. (2023, September 4). Hydroxyapatite and Tricalcium Phosphate in Combination with Zirconia Manufactured by Digital Light Processing-based Vat Polymerization to Treat Large Bone Defects [Conference Presentation]. FEMS Euromat 23, Frankfurt am Main, Germany. http://hdl.handle.net/20.500.12708/189039 ( reposiTUm)

Salvadori, A., Baudis, S., & Ovsianikov, A. (2023, March 23). Controlled Vascularization for Organ-on-chip [Presentation]. MSCA COFUND ENROL Doctoral Programme 2023, Wien, Austria. ( reposiTUm)

Nistler, S., Hofstetter, C., Baudis, S., Schwentenwein, M., & Stampfl, J. (2023, July 5). Hydroxyapatite and Tricalcium Phosphate in Combination with Zirconia Manufactured by Digital Light Processing-based Vat Polymerization [Conference Presentation]. Thermec 2023 - International Conference on Processing & Manufacturing of Advanced Materials, TU Wien, Austria. http://hdl.handle.net/20.500.12708/189037 ( reposiTUm)

Nistler, S., Hofstetter, C., Baudis, S., Schwentenwein, M., & Stampfl, J. (2023, August 31). Hydroxyapatite and Tricalcium Phosphate Sinter-Joined with Zirconia to Selectively Enhance Large Bone Implants Manufactured by Digital Light Processing-based Vat Polymerization [Poster Presentation]. yCAM Forum 2023, Leoben, Austria. http://hdl.handle.net/20.500.12708/189038 ( reposiTUm)

Gurmann, T., Dellago, B., Sinawehl, L., Liska, R., & Baudis, S. (2023, May 2). Polymeric matrices for 3D-printable and biodegradable bone scaffold materials [Conference Presentation]. Austrian Cluster for Tissue Regeneration Annual Conference 2023, Linz, Austria. http://hdl.handle.net/20.500.12708/193952 ( reposiTUm)

Baudis, S. (2023, June 29). Smart polymers for tissue engineering and regenerative medicine [Conference Presentation]. BYPoS 2023; 9th Bratislava Young Polymer Scientists Conference, Banska Stiavnica, Slovakia. http://hdl.handle.net/20.500.12708/204832 ( reposiTUm)

Baudis, S. (2023, September 4). Macromolecular design of materials for biomedical applications [Conference Presentation]. Polymer Meeting 15, Bratislava, Slovakia. http://hdl.handle.net/20.500.12708/206048 ( reposiTUm)

Schmidbauer, A., Richter, F., Marolt Presen, D., & Baudis, S. (2023). UV-Crosslinked Human Platelet Lysate - a new generation of hydrogels for bone regeneration [Conference Presentation]. Tissue Engineering and Regenerative Medicine International Society European Chapter Conference 2023 (TERMIS- EU 2023, Manchester UK), Manchester, United Kingdom of Great Britain and Northern Ireland (the). http://hdl.handle.net/20.500.12708/189505 ( reposiTUm)

Keck, S., Seidler, K., Gorsche, C., Knaus, S., & Baudis, S. (2022). Lignin-based photopolymers: renewable materials for 3D printing [Conference Presentation]. Österreichische Chemietage 2022, Wien, Austria. ( reposiTUm)

Fantoni, A., Schoup, J. C., Koch, T., Baudis, S., & Liska, R. (2022). Sustainable Interpenetrating Polymer Networks for lithography-based 3D-printing [Poster Presentation]. Österreichische Chemietage 2022, TU Wien, Austria. http://hdl.handle.net/20.500.12708/91434 ( reposiTUm)

Dellago, B., Liska, R., & Baudis, S. (2022). End-group modified toughness enhancers for bone replacement materials [Poster Presentation]. EPF European Polymer Congress 2022, Czechia. ( reposiTUm)

Rohatschek, A., Steinbauer, P., Baudis, S., & Thurner, P. (2022, June 26). Experimental investigation of tropocollagen mechanics [Conference Presentation]. 27th Congress of the European Society of Biomechanics, Portugal. ( reposiTUm)

Rohatschek, A., Steinbauer, P., Baudis, S., & Thurner, P. (2022, June 27). Experimental investigation of Tropocollagen mechancis [Conference Presentation]. ESB 2022 - 27th Congress of the European Society of Biomechanics, Porto, Portugal. ( reposiTUm)

Dellago, B., Berk, O., Liska, R., & Baudis, S. (2022). Toughness Enhancers with End-Group Modifications for Photopolymerizable Bone Replacement Materials [Poster Presentation]. Österreichische Chemietage 2022, Wien, Austria. http://hdl.handle.net/20.500.12708/154386 ( reposiTUm)

Reichsöllner, R., Schmidbauer, A., Puljic, A., Hackethal, J., Redl, H., & Baudis, S. (2022, June 30). Behavior of Dual-Crosslinked Gelatin and its Potential Influence on Vascularization [Poster Presentation]. TERMIS EU-Chapter Krakow, Krakow, Poland. http://hdl.handle.net/20.500.12708/152330 ( reposiTUm)

Steinbauer, P., Sinawehl, L., Liska, R., & Baudis, S. (2022, June 28). One-Step Photopolymerizable Adhesives for Bone Fracture Fixation [Poster Presentation]. EPF European Polymer Congress 2022, Prag, Czechia. http://hdl.handle.net/20.500.12708/152785 ( reposiTUm)

Kojic, D., Steinbauer, P., Baudis, S., & Liska, R. (2022). Ternary thiol-ene systems as one step light curable bone adhesives [Conference Presentation]. EPF European Polymer Congress 2022, Prag, Czechia. ( reposiTUm)

Ehrmann, K., Fitzka, M., Berk, O., Liska, R., & Baudis, S. (2022). In situ reinforcing polymers as high performance biomaterials [Conference Presentation]. EPF European Polymer Congress, Prague, Czechia. http://hdl.handle.net/20.500.12708/152678 ( reposiTUm)

Ricke, A., Dellago, B., Ehrmann, K., Liska, R., & Baudis, S. (2022, June 28). Cyclic acetals as photopolymerizable precursors for degradable biomaterials [Conference Presentation]. EPF European Polymer Congress 2022, Prag, Czechia. http://hdl.handle.net/20.500.12708/152389 ( reposiTUm)

Steinbauer, P., Sinawehl, L., Baudis, S., & Liska, R. (2022). High-Performance Photopolymerizable Adhesives for Bone Repair [Poster Presentation]. 9th TERMIS Winterschool, Radstadt, Austria. ( reposiTUm)

Rohatschek, A., Steinbauer, P., Baudis, S., & Thurner, P. (2022, May 20). Experimental mechanics of tropocollagen: A molecular fishing trip on the nanoscale [Conference Presentation]. NanoInBio 2022, Le Gosier, Guadeloupe, France. ( reposiTUm)

Steinbauer, P., Sinawehl, L., Baudis, S., & Liska, R. (2022). High-Performance Adhesives for Fracture Treatment [Poster Presentation]. Österreichische Chemietage 2022, Wien, Austria. ( reposiTUm)

Fitzka, M., Ehrmann, K., Baudis, S., & Liska, R. (2022). Self-reinforcing urethane/urea elastomers as dynamic biomaterials for vascular tissue engineering [Poster Presentation]. EPF European Polymer Congress 2022, Prag, Czechia. ( reposiTUm)

Gorsche, C., Reghunathan, H., Baudis, S., Knaack, P., Husar, B., Läuger, J., Hoffmann, H., & Liska, R. (2022, November 18). Photorheology: A Versatile Tool to Unravel Photopolymerization Processes [Conference Presentation]. Annual Meeting of the Austrian Society for Rheology, Austria. ( reposiTUm)

Schwarzl, P., Ehrmann, K., Liska, R., & Baudis, S. (2022). Improving the Mechanical Properties of Hard-Block Degradable Thermoplastic Polyurethanes for Vascular Tissue Engineering [Poster Presentation]. Österreichische Chemietage 2022, Wien, Austria. ( reposiTUm)

Kutsch, A. L., Hofstetter, C., Nistler, S., Baudis, S., Schwentenwein, M., & Stampfl, J. (2022, September 22). Investigations on the Rheology and Deagglomeration of Digital Light Processing Based Vat Polymerisation of Si3N4-Slurries Containing Different Dispersing Additives [Conference Presentation]. Joint KMM-VIN / ViCEM / ESB Cross-disciplinary Workshop on Biomedical and Bioinspired Materials and Structures: A Cross-Disciplinary Approach, TU Wien, Austria. http://hdl.handle.net/20.500.12708/152919 ( reposiTUm)

Dellago, B., Ricke, A., Geyer, T., Liska, R., & Baudis, S. (2022). Degradability Enhancers Based on Photopolymerizable Acetal Building Blocks for Artificial Bone Grafts [Poster Presentation]. 9th TERMIS Winterschool, Radstadt, Austria. http://hdl.handle.net/20.500.12708/152601 ( reposiTUm)

Sinawehl, L., Baudis, S., & Liska, R. (2022). Novel bone replacement materials with improved degradation behavior [Conference Presentation]. Austrian Cluster for Tissue Regeneration 2022, Wien, Austria. ( reposiTUm)

Haslinger, C., Zahoranova, A., Krenn Georg, Stefan Holler, & Baudis, S. (2022). Sonorheology: A Novel Set-Up for Investigation of Ultrasound-Triggered Reactions [Conference Presentation]. Annual Meeting of the Austrian Society for Rheology, Wien, Austria. http://hdl.handle.net/20.500.12708/154347 ( reposiTUm)

Schmidbauer, A., Richter, F., Marolt Presen, D., & Baudis, S. (2022, September). Hydrogels Based on Human Platelet Lysate - a chance for improved osseointegration of artificial bone implants? [Poster Presentation]. Österreichische Chemietage 2022, TU Wien, Austria. http://hdl.handle.net/20.500.12708/135810 ( reposiTUm)

Haslinger, C., Leutgeb, L. P., Haas, M., Baudis, S., & Liska, R. (2022). Synthesis and Characterization of Novel Photoinitiators based on Tetraacylgermanes [Poster Presentation]. Österreichische Chemietage 2022, Wien, Austria. http://hdl.handle.net/20.500.12708/114876 ( reposiTUm)

Rohatschek, A., Steinbauer, P., Baudis, S., & Thurner, P. J. (2021). AFM SMFS measurements of individual collagen molecules. 13th European Biophysics Conference (EBSA), Vienna, Austria. http://hdl.handle.net/20.500.12708/95537 ( reposiTUm)

Rohatschek, A., Andriotis, O. G., Steinbauer, P., Baudis, S., & Thurner, P. J. (2021). AFM SMFS of individual collagen molecules. 2021 NanoScientific Forum Europe (NSFE2021), Freiburg, Germany. http://hdl.handle.net/20.500.12708/95536 ( reposiTUm)

Kutsch, A. L., Hofstetter, C., Baudis, S., Schwentenwein, M., & Stampfl, J. (2021). Investigations on the rheology and deagglomeration of digital light processing based vat polymerisation of Si3N4 slurries containing different dispersing additives. ESIAM 2021, Wien, Austria. http://hdl.handle.net/20.500.12708/95504 ( reposiTUm)

Baudis, S. (2021). Advanced Biophotopolymers for Bone Healing. M3d+it 2021, Steyr-Gleink, Austria. http://hdl.handle.net/20.500.12708/101722 ( reposiTUm)

Steinbauer, P., Rohatschek, A., Thurner, P. J., Orestis, A., Liska, R., & Baudis, S. (2019). Adhesion measurement of binding motifs for bone glue applications. 2nd INTERREG - 7th TERMIS Winterschool 2019 “Musculoskeletal Tissue Regeneration: From Mechanobiology to in Vitro/in Vivo Models and Advanced Imaging,” Radstadt, Austria. http://hdl.handle.net/20.500.12708/101088 ( reposiTUm)

Steinbauer, P., Orman, S., Hofstetter, C., Schwentenwein, M., Russmüller, G., Stampfl, J., Liska, R., & Baudis, S. (2019). Tough photopolymers for bone tissue regeneration. ViCEM - Vienna Center for Engineering in Medicine - Biennial Meeting 2019, Wien, Austria. http://hdl.handle.net/20.500.12708/101424 ( reposiTUm)

Steinbauer, P., Reichsöllner, R., Dellago, B., Ehrmann, K., Stampfl, J., Liska, R., & Baudis, S. (2019). Christian Doppler Laboratory for Advanced Polymers for Biomaterials and 3D Printing. 2nd Vienna Polymer-Group Symposium, Tulln, Austria. http://hdl.handle.net/20.500.12708/101133 ( reposiTUm)

Reichsöllner, R., Rebers, L., Southan, A., & Baudis, S. (2019). Real Time-NIR-Photorheology: In Situ Characterization of the Gelatin-Methacryloyl Hydrogel Photocuring Process. ViCEM - Vienna Center for Engineering in Medicine - Biennial Meeting 2019, Wien, Austria. http://hdl.handle.net/20.500.12708/101230 ( reposiTUm)

Reichsöllner, R., Rebers, L., Southan, A., & Baudis, S. (2019). Physical and Chemical Characterization during the Photocuring Process of Gelatin Hydrogels. New Frontiers in Biofabrication: From Biomolecules to Tissues and Organs, Leuven, Belgium. http://hdl.handle.net/20.500.12708/101175 ( reposiTUm)

Steinbauer, P., Orman, S., Hofstetter, C., Schwentenwein, M., Russmüller, G., Stampfl, J., Liska, R., & Baudis, S. (2019). Tough photopolymers as customized biocompatible scaffolds for bone tissue regeneration. New Frontiers in Biofabrication: From Biomolecules to Tissues and Organs, Leuven, Belgium. http://hdl.handle.net/20.500.12708/101171 ( reposiTUm)

Ehrmann, K., Grasl, C., Eilenberg, M., Rohringer, S., Bergmeister, H., Podesser, B. K., Schima, H., Liska, R., Baudis, S., & Schwarzl, P. (2019). Development of Thermoplastic Elastomers for Vascular Tissue Regeneration. ViCEM - Vienna Center for Engineering in Medicine - Biennial Meeting 2019, Wien, Austria. http://hdl.handle.net/20.500.12708/101229 ( reposiTUm)

Dellago, B., Geyer, T., Liska, R., & Baudis, S. (2019). Biodegradable photopolymers based on acetal building blocks as artificial bone grafts. ViCEM - Vienna Center for Engineering in Medicine - Biennial Meeting 2019, Wien, Austria. http://hdl.handle.net/20.500.12708/101228 ( reposiTUm)

Ehrmann, K., Grasl, C., Bergmeister, H., Schima, H., Podesser, B. K., Liska, R., & Baudis, S. (2019). From Building Blocks to a Biodegradable & Stable Vascular Graft. 43. Seminar der Österreichischen Gesellschaft für Chirurgische Forschung, Wien, Austria. http://hdl.handle.net/20.500.12708/101224 ( reposiTUm)

Zerobin, E., Tromayer, M., Markovic, M., Steiger, W., Gruber, P., Stampfl, J., Ovsianikov, A., Baudis, S., & Liska, R. (2018). Hyaluronic acid as a basis for the development of hydrogel networks and Two-Photon Initiators. 1st Vienna Polymer-Group Symposium, Wien, Austria. http://hdl.handle.net/20.500.12708/94940 ( reposiTUm)

Liske, O., Dorfinger, P., Steyrer, B., Gorsche, C., Gmeiner, R., Stampfl, J., Liska, R., Baudis, S., & Knaus, S. (2018). Tailor-made 3D Manufactured Products from Bio-based Renewable Raw Materials. Blickpunkt Forschung: Materialinnovationen @ TU Wien, Wien, Austria. http://hdl.handle.net/20.500.12708/100833 ( reposiTUm)

Baudis, S., & Gorsche, C. (2018). Lignin als Baustein für 3D-gefertigte Produkte. Blickpunkt Forschung: Materialinnovationen @ TU Wien, Wien, Austria. http://hdl.handle.net/20.500.12708/100832 ( reposiTUm)

Baudis, S. (2018). Biocompatible Photopolymers for Additive Manufacturing Applications. Additive Manufacturing in Medicine - 1st Symposium, Wien, Austria. http://hdl.handle.net/20.500.12708/100834 ( reposiTUm)

Baudis, S. (2018). Polymers & 3D Printing; Biomaterials; Sustainability. 1st Vienna Polymer-Group Symposium, Wien, Austria. http://hdl.handle.net/20.500.12708/100835 ( reposiTUm)

Steinbauer, P., Dworak, C., Baudis, S., Thurner, P. J., Andriotis, O. G., & Liska, R. (2018). Phosphorus-based RAFT Polymers for Bio-Adhesion. 1st Vienna Polymer-Group Symposium, Wien, Austria. http://hdl.handle.net/20.500.12708/100861 ( reposiTUm)

Ehrmann, K., Dworak, C., Seidler, K., Potzmann, P., Grasl, C., Bergmeister, H., Baudis, S., Podesser, B. K., & Liska, R. (2018). Biodegradable Thermoplastic Polyurethane Polymers for their Application as Electrospun Artificial Blood Vessels. 1st Vienna Polymer-Group Symposium, Wien, Austria. http://hdl.handle.net/20.500.12708/100836 ( reposiTUm)

Baudis, S., Orman, S., Mautner, A., Schwentenwein, M., Russmüller, G., Stampfl, J., & Liska, R. (2018). Biocompatible, tough photopolymers as 3D printed constructs for bone regeneration. 1st TERMIS-EU WORKSHOP in collaboration with ISBF “3D Printing in Musculoskeletal Tissue Engineering,” Warschau, Poland. http://hdl.handle.net/20.500.12708/100969 ( reposiTUm)

Zerobin, E., Baudis, S., Tomasikova, Z., Qin, X., Markovic, M., Gruber, P., Stampfl, J., Ovsianikov, A., & Liska, R. (2017). Two-Photon Structured Hydrogels based on Hyaluronic Acid for Applications in Tissue Engineering. Österreichische Gesellschaft für Biomedizinische Technik-Jahrestagung 2017, Wien, Austria. http://hdl.handle.net/20.500.12708/100384 ( reposiTUm)

Zerobin, E., Tromayer, M., Markovic, M., Gruber, P., Stampfl, J., Ovsianikov, A., Baudis, S., & Liska, R. (2017). Hyaluronic acid as a basis for the development of hydrogel networks and Two-Photon Initiators. ViCEM - Vienna Center for Engineering in Medicine Inaugural Meeting 2017, Wien, Austria. http://hdl.handle.net/20.500.12708/94720 ( reposiTUm)

Zerobin, E., Baudis, S., Tomasikova, Z., Qin, X., Markovic, M., Gruber, P., Stampfl, J., Ovsianikov, A., & Liska, R. (2017). High Resolved Biocompatible Hydrogel Constructs Based on Hyaluronic Acid. Workshop Additive manufacturing as a tool to create life in 3D, Brno, Czechia. http://hdl.handle.net/20.500.12708/100345 ( reposiTUm)

Rohatschek, A., Steinbauer, P., Andriotis, O. G., Dworak, C., Baudis, S., Unterlass, M. M., & Thurner, P. J. (2017). Experimental Mechanics of Collagen Molecules. AFM BioMed Conference Krakow 2017, Krakau, Poland. http://hdl.handle.net/20.500.12708/94745 ( reposiTUm)

Baudis, S. (2016). Advanced Photopolymers. Sino-Austrian Advanced Materials Conference, Shanghai, China. http://hdl.handle.net/20.500.12708/100208 ( reposiTUm)

Baudis, S., & Liska, R. (2015). Advanced Photopolymers for High Resolution Addtive Manufacturing. ADD+IT 2015, Linz, Austria. http://hdl.handle.net/20.500.12708/99837 ( reposiTUm)

Baudis, S., Tomasikova, Z., Qin, X., Gruber, P., Markovic, M., Stampfl, J., Ovsianikov, A., & Liska, R. (2015). Cell Encapsulation by Microfabrication with Hyaluronic Acid based Hydrogel Precursors. International Conference on Biofabrication 2015, Utrecht, Netherlands (the). http://hdl.handle.net/20.500.12708/94272 ( reposiTUm)

Ligon, S., Husar, B., Baudis, S., Nehl, F., Nigisch, A., Bergmeister, H., Bernhard, D., Stampfl, J., & Liska, R. (2012). Improved elastomeric materials for CAD/CAM generation of vascular structures in soft tissue replacement therapies. The 3#^{rd} TERMIS World Congress 2012, Vienna, Austria. http://hdl.handle.net/20.500.12708/98919 ( reposiTUm)

Ligon, S., Husar, B., Baudis, S., Seidler, K., Weigel, G., Grasl, C., Bergmeister, H., & Liska, R. (2012). Electrospun thermoplastic polyurethane vascular grafts with controllable degradation. ESF Research Networking Programme on Precision Polymer Materials (P2M), San Feliu de Guixols, Spain. http://hdl.handle.net/20.500.12708/99117 ( reposiTUm)

Schreiber, C., Baudis, S., Grasl, C., Stoiber, M., Walter, I., Plasenzotti, R., Bernhard, D., & Liska, R. (2011). In-vivo evaluation of new synthetic degradable and non-degradable small diameter vascular grafts. Vfwf-Universitätsvorlesung, Vienna, Austria. http://hdl.handle.net/20.500.12708/98955 ( reposiTUm)

Seidler, K., Baudis, S., Ligon, S., Grasl, C., Arras, M., Schima, H., Bergmeister, H., Winter, B., Koch, T., Stampfl, J., & Liska, R. (2011). Biocompatible and biodegradable thermoplastic urethane Elastomers for electrospinning of vascular grafts. 1#^{st} P2M Networking Conference, Obernai, F, EU. http://hdl.handle.net/20.500.12708/98696 ( reposiTUm)

Baudis, S., Schwarz, M., Grasl, C., Bergmeister, H., Weigel, G., & Schima, H. (2009). (Bio)degradable Urethane-Elastomers for Electrospun Vascular Grafts. MRS Fall Meeting 2009, Boston, MA, USA, Non-EU. http://hdl.handle.net/20.500.12708/98217 ( reposiTUm)

Baudis, S., Pulka, T., Steyrer, B., Wilhelm, H., Weigel, G., Bergmeister, H., Stampfl, J., & Liska, R. (2009). 3D-printing of Urethane-based Photoelastomers for Vascular Tissue Regeneration. MRS Fall Meeting 2009, Boston, MA, USA, Non-EU. http://hdl.handle.net/20.500.12708/98214 ( reposiTUm)

Gäbler, S., Koch, T., Stampfl, J., Seidler, S., Heller, C., Baudis, S., Liska, R., & Weidisch, R. (2008). Determination of the Viscoelastic Properties of Hydrogels based on Polyethylene Glycol Diacrylate (PEG-DA). Materials Science and Engineering - MSE 2008, Nürnberg, EU. http://hdl.handle.net/20.500.12708/92552 ( reposiTUm)

Baudis, S. (2010). Development and processing of materials for vascular tissue regeneration [Dissertation, Technische Universität Wien]. reposiTUm. https://resolver.obvsg.at/urn:nbn:at:at-ubtuw:1-38121 ( reposiTUm)