Freude, C., Lipp, L., Zezulka, M., Rist, F., Wimmer, M., & Hahn, D. (2025). Inverse Simulation of Radiative Thermal Transport. Computer Graphics Forum, Article e70048. https://doi.org/10.1111/cgf.70048 ( reposiTUm)

Lipp, L., Hahn, D., Ecormier-Nocca, P., Rist, F., & Wimmer, M. (2024). View-Independent Adjoint Light Tracing for Lighting Design Optimization. ACM Transactions on Graphics, 43(3), Article 35. https://doi.org/10.1145/3662180 ( reposiTUm)

Rist, F., Wang, Z., Pellis, D., Palma, M., Liu, D., Grinspun, E., & Michels, D. L. (2024). A Flexible Mold for Facade Panel Fabrication. ACM Transactions on Graphics, 43(6), 1–16. https://doi.org/10.1145/3687906 ( reposiTUm)

Jiang, C., Lyakhov, D., Rist, F., Pottmann, H., & Wallner, J. (2024). Quad mesh mechanisms. ACM Transactions on Graphics, 43(6), 1–17. https://doi.org/10.1145/3687939 ( reposiTUm)

Ceballos Inza, V., Fykouras, P., Rist, F., Häseker, D., Hojjat, M., Müller, C., & Pottmann, H. (2024). Designing triangle meshes with controlled roughness. ACM Transactions on Graphics, 43(6), 1–20. https://doi.org/10.1145/3687940 ( reposiTUm)

Freude, C., Hahn, D., Rist, F., Lipp, L., & Wimmer, M. (2023). Precomputed radiative heat transport for efficient thermal simulation. Computer Graphics Forum, 42(7), Article e14957. https://doi.org/10.1111/cgf.14957 ( reposiTUm)

Liu, D., Pellis, D., Chiang, Y.-C., Rist, F., Wallner, J., & Pottmann, H. (2023). Deployable strip structures. ACM Transactions on Graphics, 42(4), 1–16. https://doi.org/10.1145/3592393 ( reposiTUm)

Wimmer, M., Kovacic, I., Ferschin, P., Rist, F., Hensel, M., Schinegger, K., Rutzinger, S., Kaufmann, H., Kilian, M., Müller, C., Izmestiev, I., Nawratil, G., Füssl, J., Stavric, M., Hahn, D., & Suter, G. (2022). Advanced Computational Design – digitale Methoden für die frühe Entwurfsphase. Bautechnik, 99(10), 720–730. https://doi.org/10.1002/bate.202200057 ( reposiTUm)

Jiang, C., Wang, H., Inza, V. C., Dellinger, F., Rist, F., Wallner, J., & Pottmann, H. (2021). Using isometries for computational design and fabrication. ACM Transactions on Graphics, 40(4), 1–12. https://doi.org/10.1145/3450626.3459839 ( reposiTUm)

Michael Barton, Bizzarri, M., Rist, F., Sliusarenko, O., & Pottmann, H. (2021). Geometry and tool motion planning for curvature adapted CNC machining. ACM Transactions on Graphics, 40(4), 1–16. https://doi.org/10.1145/3450626.3459837 ( reposiTUm)

Li, Z., Nawratil, G., Rist, F., & Hensel, M. (2020). Invertible Paradoxic Loop Structures for Transformable Design. Computer Graphics Forum, 39(2), 261–275. https://doi.org/10.1111/cgf.13928 ( reposiTUm)

Pellis, D., Wang, H., Kilian, M., Rist, F., Pottmann, H., & Müller, C. (2020). Principal Symmetric Meshes. ACM Transactions on Graphics, 39(4). https://doi.org/10.1145/3386569.3392446 ( reposiTUm)

Gavriil, K., Guseinov, R., Pérez, J., Pellis, D., Henderson, P., Rist, F., Pottmann, H., & Bickel, B. (2020). Computational Design of Cold Bent Glass Facades. ACM Transactions on Graphics, 39(6), 1–16. https://doi.org/10.1145/3414685.3417843 ( reposiTUm)

Jiang, C., Wang, C., Rist, F., Wallner, J., & Pottmann, H. (2020). Quad-mesh based isometric mappings and developable surfaces. ACM Transactions on Graphics, 39(4). https://doi.org/10.1145/3386569.3392430 ( reposiTUm)

Jiang, C., Rist, F., Pottmann, H., & Wallner, J. (2020). Freeform quad-based kirigami. ACM Transactions on Graphics, 39(6), 1–11. https://doi.org/10.1145/3414685.3417844 ( reposiTUm)

Wang, H., Pellis, D., Rist, F., Pottmann, H., & Müller, C. (2019). Discrete Geodesic Parallel Coordinates. ACM Transactions on Graphics, 38(6), 1–13. https://doi.org/10.1145/3355089.3356541 ( reposiTUm)

Jiang, C., Mundilova, K., Rist, F., Wallner, J., & Pottmann, H. (2019). Curve-pleated structures. ACM Transactions on Graphics, 38(6), 1–13. https://doi.org/10.1145/3355089.3356540 ( reposiTUm)

Birsak, M., Rist, F., Wonka, P., & Musialski, P. (2018). String Art: Towards Computational Fabrication of String Images. Computer Graphics Forum, 37(2), 263–274. https://doi.org/10.1111/cgf.13359 ( reposiTUm)

Kern, C., & Rist, F. (2010). Integration physischer und digitaler Designmethoden. Detail - Zeitschrift Für Architektur Und Baudetail, SERIE 2010 .5 ANALOG UND DIGITAL(5), 442–443. http://hdl.handle.net/20.500.12708/166882 ( reposiTUm)

Pillwein, S., Kübert, J., Rist, F., & Musialski, P. (2020). Design and Fabrication of Elastic Geodesic Grid Structures. In Symposium on Computational Fabrication. Association for Computing Machinery. https://doi.org/10.1145/3424630.3425412 ( reposiTUm)

Birsak, M., Rist, F., Wonka, P., & Musialski, P. (2018). String Art: Towards Computational Fabrication of String Images. In Proceedings Eurographics 2018 (pp. 263–274). Computer Graphics Forum. http://hdl.handle.net/20.500.12708/57385 ( reposiTUm)

Reis, M., Schmiedhofer, H., Flöry, S., Rist, F., & Suter, G. (2015). A novel dovetail joining method for planar panels with non-orthogonal cut surfaces. In Applied mechanics and materials, mechanical and electrical technology VII (pp. 335–342). Trans Tech Publications. http://hdl.handle.net/20.500.12708/64442 ( reposiTUm)

Schmiedhofer, H., Reis, M., Flöry, S., Rist, F., & Suter, G. (2014). A Framework for Linking Design and Fabrication in Geometrically Complex Architecture. In Association for Computer Aided Design in Architecture Conference (p. 9). http://hdl.handle.net/20.500.12708/64334 ( reposiTUm)

Pauly, M., Eigensatz, M., Bompas, P., Rist, F., & Krenmüller, R. (2013). Controlling Caustics. In Glass Performace Days 2013 (pp. 494–498). http://hdl.handle.net/20.500.12708/64387 ( reposiTUm)

Rust, R., Rist, F., & Dörfler, K. (2013). Interlacing - An Experimental Approach of Integrating Digital and Physical Design Methods. In S. Brell Cokcan & J. Braumann (Eds.), Rob|Arch 2012: Robotic Fabrication in Architecture, Art and Design (pp. 82–91). Springer. http://hdl.handle.net/20.500.12708/64388 ( reposiTUm)

Reichinger, A., Neumüller, M., Rist, F., Maierhofer, S., & Purgathofer, W. (2012). Computer-Aided Design of Tactile Models - Taxonomy and Case Studies. In Computers Helping People with Special Needs: 13th International Conference, ICCHP 2012 (pp. 497–504). Springer. http://hdl.handle.net/20.500.12708/64390 ( reposiTUm)

Kern, C., & Rist, F. (2012). Verschränkung - Computergestützte Methoden als Werkzeuge architektonischer und künstlerischer Gestaltung. In MEHR-WERT Architektur & Raumplanung. Wissenschaftstag 2012 (pp. 98–99). Fakultät für Architektur und Raumplanung, TU Wien. http://hdl.handle.net/20.500.12708/64391 ( reposiTUm)

Kern, C., Jourda, F.-H., Kottbauer, A., Auer, P., Welte, F., Rist, F., Fineder, M., Geisler, T., Graf, R., Wallerberger, M., Fredes, A., & Montecuccoli, M. (2009). robots@home - VIENNA DESIGN WEEK. In C. Kern & F. Welte (Eds.), Modul Objekt- und Produktdesign - robots@home. http://hdl.handle.net/20.500.12708/63684 ( reposiTUm)

Kern, C., Jourda, F.-H., Kottbauer, A., Auer, P., Welte, F., Rist, F., Fineder, M., Geisler, T., Graf, R., Wallerberger, M., Fredes, A., & Montecuccoli, M. (2009). robots@home - Architektur & Design - Alltagsroboter im Visier der Architektur. In Modul Objekt- und Produktdesign - robots@home. [Modul Objekt- und Produktdesign - robots@home], TU Wien, Prechtlsaal, Austria. http://hdl.handle.net/20.500.12708/63683 ( reposiTUm)

Jourda, F.-H., Kern, C., Kottbauer, A., Welte, F., Auer, P., Rist, F., Fischer, A., Graf, R., Wallerberger, M., Fredes, A., Montecuccoli, M., Geisler, T., Fineder, M., & Chamier, D. (2008). eero_plastic - leichte, transportierbare Objekte. In A. Kottbauer (Ed.), Modul Objekt- und Produktdesign - eero_plastic. http://hdl.handle.net/20.500.12708/63686 ( reposiTUm)

Hinz, S., Stephani, M., Schiemann, L., & Rist, F. (2007). Automatic Reconstruction of Shape Evolution of ETFE-Foils by Close-Range Photogrammetric Image Analysis. In Photogrammetric Image Analysis (pp. 59–64). http://hdl.handle.net/20.500.12708/64392 ( reposiTUm)

Neumüller, M., Rist, F., Reichinger, A., & Kern, C. (2014). 3D Printing for Cultural Heritage: Preservation, Accessibility, Research and Education. In M. Ioannides & E. Quak (Eds.), 3D Research Challenges in Cultural Heritage (pp. 119–134). Springer Dordrecht Heidelberg London New York. http://hdl.handle.net/20.500.12708/28686 ( reposiTUm)

Rist, F. (2012). 14 Million für TOMAK. In W. Haas, F. Rist, E. Mayer, & G. Matt (Eds.), TOMAK (p. 151). Verlag für moderne Kunst. http://hdl.handle.net/20.500.12708/176266 ( reposiTUm)

Jourda, F.-H. (2008). Vorwort - eero plasic. In C. Kern, F.-H. Jourda, F. Welte, P. Auer, A. Kottbauer, T. Geisler, M. Fineder, & F. Rist (Eds.), eero_plastic (pp. 5–6). e264/2 dreidimensionales gestalten und modellbau. http://hdl.handle.net/20.500.12708/26545 ( reposiTUm)

Kottbauer, A., Jourda, F.-H., Kern, C., Auer, P., Welte, F., Rist, F., Fineder, M., Geisler, T., Graf, R., Wallerberger, M., Fredes, A., & Montecuccoli, M. (Eds.). (2009). Modul Objekt- und Produktdesign - robots@home. Eigenverlag Abteilung Raumgestaltung und Entwerfen. http://hdl.handle.net/20.500.12708/22971 ( reposiTUm)

Jourda, F.-H., Kern, C., Kottbauer, A., Welte, F., Auer, P., Rist, F., Fischer, A., Graf, R., Wallerberger, M., Fredes, A., Montecuccoli, M., Geisler, T., Fineder, M., & Chamier, D. (Eds.). (2008). Modul Objekt- und Produktdesign - eero_plastic. Eigenverlag Abteilung Raumgestaltung und Entwerfen. http://hdl.handle.net/20.500.12708/22997 ( reposiTUm)

Kern, C., Jourda, F.-H., Welte, F., Auer, P., Kottbauer, A., Geisler, T., Fineder, M., & Rist, F. (Eds.). (2008). eero_plastic. e264/2 dreidimensionales gestalten und modellbau. http://hdl.handle.net/20.500.12708/22758 ( reposiTUm)

Rist, F., Rust, R., & Dörfler, K. (2014). loop 2. Künstlerhaus Bregenz, Bregenz, Austria. http://hdl.handle.net/20.500.12708/105980 ( reposiTUm)

Dörfler, K., Rust, R., & Rist, F. (2012). Interlacing. Rob|Arch 2012, Wien, Österreich, Austria. http://hdl.handle.net/20.500.12708/105988 ( reposiTUm)

Rist, F. (2012). Rapid Prototyping Workshop. Rapid Prototyping Workshop, Wien, TU Wien, Austria. http://hdl.handle.net/20.500.12708/105989 ( reposiTUm)