Moll, P., Pfusterschmied, G., Schmid, B., Schwarz, S., Artner, W., & Schmid, U. (2025). Ultra-low CTE-mismatch of 3C-SiC-on-Si thin films for high temperature MEMS applications. SENSORS AND ACTUATORS A-PHYSICAL, 384, Article 116262. https://doi.org/10.1016/j.sna.2025.116262 ( reposiTUm)

Huang, Z., Naghdi, S., Ertl, A., Schwarz, S., & Eder, D. (2025). Strategic Secondary Ligand Selection for Enhanced Pore-Type Construction and Water Purification Capacity in Zeolitic Imidazolate Frameworks. ACS APPLIED MATERIALS & INTERFACES, 17(14), 21133–21142. https://doi.org/10.1021/acsami.4c21221 ( reposiTUm)

Göcerler, H., Danecker, C., Gachot, C., Sui, X., Tomala, A., Rosenkranz, A., Nastran, M., Bayer, B. C., Loni, E., Schwarz, S., Stöger-Pollach, M., & Bilotto, P. (2025). Unlocking the synergistic impact of laser texturing and Ti₃C₂Tₓ MXene coatings – Substrate-specific tribological insights. Carbon, 238, Article 120270. https://doi.org/10.1016/j.carbon.2025.120270 ( reposiTUm)

Moll, P., Pfusterschmied, G., Schwarz, S., Stöger-Pollach, M., & Schmid, U. (2024). Impact of alternating precursor supply and gas flow on the LPCVD growth behavior of polycrystalline 3C-SiC thin films on Si. SENSORS AND ACTUATORS A-PHYSICAL, 372, 1–9. https://doi.org/10.1016/j.sna.2024.115376 ( reposiTUm)

Moll, P., Schwarz, S., Pfusterschmied, G., Artner, W., & Schmid, U. (2024). Polycrystalline Lpcvd 3c-Sic Thin Films on Sio2 Using Alternating Supply Deposition. Journal of Microelectromechanical Systems, 1–9. https://doi.org/10.34726/7319 ( reposiTUm)

Perazzi, M., Leitgeb, M., Vengattoor Raghu, A., Zellner, C., Hahn, R., Kirnbauer, A., Schwarz, S., Pfusterschmied, G., & Schmid, U. (2024). High-Temperature Reorganization Behavior of Single-Crystalline Porous 4H-SiC Thin Foils. Materials Science Forum, 1124, 43–49. https://doi.org/10.4028/p-D0xoyc ( reposiTUm)

Huang, Z., Wang, Z., Rabl, H., Naghdi, S., Zhou, Q., Schwarz, S., Apaydin, D. H., Yu, Y., & Eder, D. (2024). Ligand engineering enhances (photo) electrocatalytic activity and stability of zeolitic imidazolate frameworks via in-situ surface reconstruction. Nature Communications, 15(1), Article 9393. https://doi.org/10.1038/s41467-024-53385-0 ( reposiTUm)

Boidi, G., Zambrano, D., Schwarz, S., Marquis, E., Varga, M., Ripoll, M. R., Badisch, E., Righi, M. C., Gachot, C., Grützmacher, P. G., & Rosenkranz, A. (2024). Solid lubrication performance of hybrid Ti3C2T /MoS2 coatings. Carbon, 225, Article 119067. https://doi.org/10.1016/j.carbon.2024.119067 ( reposiTUm)

Pöllinger, A., Maurer, J., Koch, T., Krenn, S., Plank, B., Schwarz, S., Stöger-Pollach, M., Siakkou, E., Smrczkova, K., & Schöbel, M. (2024). Characterization of PPS Piston and Packing Ring Materials for High-Pressure Hydrogen Applications. Polymers, 16(3), Article 412. https://doi.org/10.3390/polym16030412 ( reposiTUm)

Vezzelli, M., Ripoll Rodríguez, M., Schwarz, S., Erdemir, A., Righi, M. C., & Gachot, C. (2024). A different perspective on the solid lubrication performance of black phosphorous: friend or foe? Advanced Engineering Materials, Article 202401756. https://doi.org/10.1002/adem.202401756 ( reposiTUm)

Winkelmann, H., Pöllinger, A., Bernardi, J., Whitmore, K., Schwarz, S., Krenn, S., Seichter, S., & Schöbel, M. (2024). Wear mechanisms and material deposition of high-performance polymer composites for hydrogen compression. Engineering Failure Analysis, 164, Article 108712. https://doi.org/10.1016/j.engfailanal.2024.108712 ( reposiTUm)

Pandit, S., Schneider, M., Schwarz, S., & Schmid, U. (2023). Enhancement of Piezoelectric Response in Yttrium Aluminum Nitride (YₓAl₁₋ₓN) Thin Films. Advanced Engineering Materials, 25(22), 1–8. https://doi.org/10.1002/adem.202300940 ( reposiTUm)

Essmeister, J., Fuchsberger, A., Steiner, D., Schwarz, S., Schachinger, T., Lale, A., Schwentenwein, M., Föttinger, K., & Konegger, T. (2023). Hierarchically Porous Ceramic and Metal‐Ceramic Hybrid Materials Structured by Vat Photopolymerization‐Induced Phase Separation. Advanced Materials Technologies, 9(1), Article 2301400. https://doi.org/10.1002/admt.202301400 ( reposiTUm)

Tangpakonsab, P., Genest, A., Yang, J., Meral, A., Zou, B., Yigit, N., Schwarz, S., & Rupprechter, G. (2023). Kinetic and Computational Studies of CO Oxidation and PROX on Cu/CeO₂ Nanospheres. Topics in Catalysis. https://doi.org/10.1007/s11244-023-01848-x ( reposiTUm)

Galakhova, A., Kadisch, F., Mori, G., Heyder, S., Wieser, H., Sartory, B., Wosik, J., Schwarz, S., & Burger, S. (2023). Corrosion of 1.4016 Ferritic Steel by Urea at High Temperature. Journal of Materials Engineering and Performance. https://doi.org/10.1007/s11665-023-08024-y ( reposiTUm)

Essmeister, J., Schachtner, L., Szoldatits, E. M., Schwarz, S., Lichtenegger, A., Baumann, B., Föttinger, K., & Konegger, T. (2023). Polymer-derived Ni/SiOC materials structured by vat-based photopolymerization with catalytic activity in CO₂ methanation. Open Ceramics, 14, Article 100350. https://doi.org/10.1016/j.oceram.2023.100350 ( reposiTUm)

Bakali, E., Artner, W., Beiser, M., Bernardi, J., Detz, H., Eguchi, G., Foelske, A., Giparakis, M., Herzig, C., Limbeck, A., Nguyen, D. H., Prochaska, L., Prokofiev, A., Sauer, M., Schwarz, S., Schrenk, W., Strasser, G., Svagera, R., Taupin, M., … Bühler-Paschen, S. (2022). A Knudsen cell approach for the molecular beam epitaxy of the heavy fermion compound YbRh2Si2. Journal of Crystal Growth, 595, Article 126804. https://doi.org/10.1016/j.jcrysgro.2022.126804 ( reposiTUm)

Rauchenecker, J., Schwarz, S., Artner, W., & Konegger, T. (2022). Atmosphere control and secondary phase migration during moderate-temperature sintering of aluminum nitride. Ceramics International, 48(11), 16425–16431. https://doi.org/10.1016/j.ceramint.2022.02.194 ( reposiTUm)

Pandit, S., Schneider, M., Berger, C., Schwarz, S., & Schmid, U. (2022). Impact of AlN Seed Layer on Microstructure and Piezoelectric Properties of YₓAl₁−ₓN (x = 15%) Thin Films. Advanced Electronic Materials, 1–8. https://doi.org/10.1002/aelm.202200789 ( reposiTUm)

Kirschner, J., Mayr-Schmölzer, W., Bernardi, J., Gaschl, R., Schwarz, S., Simson, C., Vonbun-Feldbauer, G. B., & Eisenmenger-Sittner, C. (2022). Characterization of an Al-Cu-Mg-Zn multi principal element alloy by experimental and computational screening methods. Acta Materialia, 224(117510), 117510. https://doi.org/10.1016/j.actamat.2021.117510 ( reposiTUm)

Mohammadi, A., Farzi, A., Thurner, C., Klötzer, B., Schwarz, S., Bernardi, J., Niaei, A., & Penner, S. (2022). Tailoring the metal-perovskite interface for promotional steering of the catalytic NO reduction by CO in the presence of H₂O on Pd-Lanthanum iron manganite composites. Applied Catalysis B: Environmental, 307, Article 121160. https://doi.org/10.34726/3981 ( reposiTUm)

Mohammadi, A., Praty, C., Farzi, A., Soleimanzadeh, H., Schwarz, S., Stöger-Pollach, M., Bernardi, J., Penner, S., & Niaei, A. (2022). Influence of CeO₂ and WO₃ Addition to Impregnated V₂O₅/ TiO₂ Catalysts on the Selective Catalytic Reduction of NOₓ with NH₃. Catalysis Letters. https://doi.org/10.1007/s10562-022-04108-x ( reposiTUm)

Mohammadi, A., Praty, C., Farzi, A., Soleimanzadeh, H., Schwarz, S., Stöger-Pollach, M., Bernardi, J., Penner, S., & Niaei, A. (2022). Influence of CeO₂ and WO₃ Addition to Impregnated V₂O₅/TiO₂ Catalysts on the Selective Catalytic Reduction of NOₓ with NH₃. Catalysis Letters. https://doi.org/10.1007/s10562-022-04108-x ( reposiTUm)

Walter, T., Zareghomsheh, M., Khatibi Damavandi, G., Popok, V., Kristensen, P. K., Boturchuk, I., & Schwarz, S. (2022). Interfacial adhesion strength of III-N heterostructures. Materials & Design, 213, 1–12. https://doi.org/10.1016/j.matdes.2021.110319 ( reposiTUm)

Hajian, A., Artemenko, A., Kromka, A., Schwarz, S., Schneider, M., Dragounová, K., Adaikkan, M., Zellner, C., & Schmid, U. (2022). Impact of sintering temperature on phase composition, microstructure, and porosification behavior of LTCC substrates. Journal of the European Ceramic Society, 42(13), 5789–5800. https://doi.org/10.1016/j.jeurceramsoc.2022.05.049 ( reposiTUm)

Kalantari, N., Bekheet, M., Delir Kheyrollahi Nezhad, P., Back, J., Farzi, A., Penner, S., Delibaş, N., Schwarz, S., Bernardi, J., Salari, D., & Niaei, A. (2022). Effect of chromium and boron incorporation methods on structural and catalytic properties of hierarchical ZSM-5 in the methanol-to-propylene process. Journal of Industrial and Engineering Chemistry, 111(2022), 168–182. https://doi.org/10.1016/j.jiec.2022.03.049 ( reposiTUm)

Delir Kheyrollahi Nezhad, P., Bekheet, M., Bonmassar, N., Gili, A., Kamutzki, F., Gurlo, A., Doran, A., Schwarz, S., Bernardi, J., Praetz, S., Niaei, A., Farzi, A., & Penner, S. (2022). Elucidating the role of earth alkaline doping in perovskite-based methane dry reforming catalysts. Catalysis Science & Technology, 12(4), 1229–1244. https://doi.org/10.1039/d1cy02044g ( reposiTUm)

Ploner, K., Delir Kheyrollahi Nezhad, P., Watschinger, M., Schlicker, L., Bekheet, M. F., Gurlo, A., Gili, A., Doran, A., Schwarz, S., Stöger-Pollach, M., Bernardi, J., Armbrüster, M., Klötzer, B., & Penner, S. (2021). Steering the methanol steam reforming performance of Cu/ZrO2 catalysts by modification of the Cu-ZrO2 interface dimensions resulting from Cu loading variation. Applied Catalysis A: General, 623(118279), 118279. https://doi.org/10.1016/j.apcata.2021.118279 ( reposiTUm)

Nezhad, P. D. K., Bekheet, M. F., Bonmassar, N., Schlicker, L., Gili, A., Kamutzki, F., Gurlo, A., Doran, A., Gao, Y., Heggen, M., Schwarz, S., Bernardi, J., Niaei, A., Farzi, A., Klötzer, B., & Penner, S. (2021). Mechanistic in situ insights into the formation, structural and catalytic aspects of the La2NiO4 intermediate phase in the dry reforming of methane over Ni-based perovskite catalysts. Applied Catalysis A: General, 612(117984), 117984. https://doi.org/10.1016/j.apcata.2020.117984 ( reposiTUm)

Nevosad, A., Molnar, W., & Schwarz, S. (2021). Effect of Chromium Content in the Steel Substrate on the Coating Formation and Tribological Properties of Manganese Phosphate Coatings. Journal of Materials Engineering and Performance, 30(11), 8057–8064. https://doi.org/10.1007/s11665-021-05994-9 ( reposiTUm)

Triendl, F., Pfusterschmied, G., Schwarz, S., Pobegen, G., Konrath, J. P., & Schmid, U. (2021). Barrier height tuning by inverse sputter etching at poly-Si/4H-SiC heterojunction diodes. Semiconductor Science and Technology, 36(5), 055021. https://doi.org/10.1088/1361-6641/abf29b ( reposiTUm)

Leitgeb, M., Pfusterschmied, G., Schwarz, S., Depuydt, B., Cho, J., & Schmid, U. (2021). Communication-Current Oscillations in Photoelectrochemical Etching of Monocrystalline 4H Silicon Carbide. ECS Journal of Solid State Science and Technology, 10(7), 073003. https://doi.org/10.1149/2162-8777/ac10b3 ( reposiTUm)

Triendl, F., Pfusterschmied, G., Schwarz, S., Artner, W., & Schmid, U. (2021). Si/4H-SiC heterostructure formation using metal-induced crystallization. Materials Science in Semiconductor Processing, 128(105763), 105763. https://doi.org/10.1016/j.mssp.2021.105763 ( reposiTUm)

Triendl, F., Pfusterschmied, G., Pobegen, G., Schwarz, S., Artner, W., Konrath, J. P., & Schmid, U. (2021). Growth and characterization of low pressure chemical vapor deposited Si on Si-face 4H-SiC. Materials Science in Semiconductor Processing, 131(105888), 105888. https://doi.org/10.1016/j.mssp.2021.105888 ( reposiTUm)

Triendl, F., Pfusterschmied, G., Berger, C., Schwarz, S., Artner, W., & Schmid, U. (2021). Ti/4H-SiC schottky barrier modulation by ultrathin a-SiC:H interface layer. Thin Solid Films, 721(138539), 138539. https://doi.org/10.1016/j.tsf.2021.138539 ( reposiTUm)

Bekheet, M. F., Delir Kheyrollahi Nezhad, P., Bonmassar, N., Schlicker, L., Gili, A., Praetz, S., Gurlo, A., Doran, A., Gao, Y., Heggen, M., Niaei, A., Farzi, A., Schwarz, S., Bernardi, J., Klötzer, B., & Penner, S. (2021). Steering the Methane Dry Reforming Reactivity of Ni/La₂O₃ Catalysts by Controlled In Situ Decomposition of Doped La₂NiO₄ Precursor Structures. ACS Catalysis, 11(1), 43–59. https://doi.org/10.1021/acscatal.0c04290 ( reposiTUm)

Hajian, A., Konegger, T., Bielecki, T., Mieller, B., Rabe, T., Schwarz, S., Zellner, C., & Schmid, U. (2021). Wet chemical porosification with phosphate buffer solutions for permittivity reduction of LTCC substrates. Journal of Alloys and Compounds, 863(158059), 158059. https://doi.org/10.1016/j.jallcom.2020.158059 ( reposiTUm)

Han, J., Jang, H., Thi Bui, H., Jahn, M., Ahn, D., Cho, K., Jun, B., Lee, S. U., Sabine, S., Stöger-Pollach, M., Whitmore, K., Sung, M.-M., Kutwade, Dr. V., Sharma, R., & Han, S.-H. (2021). Stable performance of Li-S battery: Engineering of Li₂S smart cathode by reduction of multilayer graphene-embedded 2D-MoS₂. Journal of Alloys and Compounds, 862, Article 158031. https://doi.org/10.1016/j.jallcom.2020.158031 ( reposiTUm)

Riedl, C., Schmid, A., Nenning, A., Summerer, H., Smetaczek, S., Schwarz, S., Bernardi, J., Opitz, A. K., Limbeck, A., & Fleig, J. (2020). Outstanding Oxygen Reduction Kinetics of La0.6Sr0.4FeO3−δ Surfaces Decorated with Platinum Nanoparticles. Journal of The Electrochemical Society, 167(10), 1–9. https://doi.org/10.1149/1945-7111/ab9c7f ( reposiTUm)

Triendl, F., Pfusterschmied, G., Fleckl, G., Schwarz, S., & Schmid, U. (2020). On the crystallization behavior of sputter-deposited a-Si films on 4H-SiC. Thin Solid Films, 697(137837), 137837. https://doi.org/10.1016/j.tsf.2020.137837 ( reposiTUm)

Schmid, P., Triendl, F., Zarfl, C., Schwarz, S., Artner, W., Schneider, M., & Schmid, U. (2020). Influence of the AlN/Pt-ratio on the electro-mechanical properties ofmultilayered AlN/Pt thin film strain gauges at high temperatures. Sensors and Actuators A: Physical, 302(111805), 111805. https://doi.org/10.1016/j.sna.2019.111805 ( reposiTUm)

Rauchenwald, E., Lessiak, M., Weissenbacher, R., Schwarz, S., & Haubner, R. (2020). Characterisation of chemical vapour deposited AlHfN coatings. Defect and Diffusion Forum, 405, 33–39. https://doi.org/10.4028/www.scientific.net/ddf.405.33 ( reposiTUm)

Zareghomsheh, M., Khatibi, G., Weiss, B., Lederer, M., Schwarz, S., Steiger-Thirsfeld, A., Tikhonovsky, M., Tabachnikova, E. D., & Schafler, E. (2020). High cycle fatigue deformation mechanisms of a single phase CrMnFeCoNi high entropy alloy. Materials Science and Engineering: A, 777(139034), 1–11. https://doi.org/10.1016/j.msea.2020.139034 ( reposiTUm)

Opitz, A. K., Nenning, A., Vonk, V., Volkov, S., Bertram, F., Summerer, H., Schwarz, S., Steiger-Thirsfeld, A., Bernardi, J., Stierle, A., & Fleig, J. (2020). Understanding electrochemical switchability of perovskite-type exsolution catalysts. Nature Communications, 11(4801). https://doi.org/10.1038/s41467-020-18563-w ( reposiTUm)

Hajian, A., Brehl, M., Koch, T., Zellner, C., Schwarz, S., Konegger, T., de Ligny, D., & Schmid, U. (2019). Wet-chemical porosification of LTCC substrates: Dissolution mechanism and mechanical properties. Microporous and Mesoporous Materials, 288(109593), 109593. https://doi.org/10.1016/j.micromeso.2019.109593 ( reposiTUm)

Schmid, P., Triendl, F., Zarfl, C., Schwarz, S., Artner, W., Schneider, M., & Schmid, U. (2019). Electro-mechanical Properties of Multilayered Aluminum Nitride and Platinum Thin Films at High Temperatures. Sensors and Actuators A: Physical, 293, 128–135. https://doi.org/10.1016/j.sna.2019.04.036 ( reposiTUm)

Stöger-Pollach, M., Bukvišová, K., Schwarz, S., Kvapil, M., Šamořil, T., & Horák, M. (2019). Fundamentals of cathodoluminescence in a STEM: The impact of sample geometry and electron beam energy on light emission of semiconductors. Ultramicroscopy, 200, 111–124. https://doi.org/10.1016/j.ultramic.2019.03.001 ( reposiTUm)

Hauser, D., Auer, A., Kunze-Liebhäuser, J., Schwarz, S., Bernardi, J., & Penner, S. (2019). Hybrid synthesis of zirconium oxycarbide nanopowders with defined and controlled composition. RSC Advances, 9(6), 3151–3156. https://doi.org/10.1039/c8ra09584a ( reposiTUm)

Boturchuk, I., Walter, T., Julsgaard, B., Khatibi, G., Schwarz, S., Stöger-Pollach, M., Pedersen, K., & Popok, V. N. (2019). Structure and properties of Ta/Al/Ta and Ti/Al/Ti/Au multilayer metal stacks formed as ohmic contacts on n-GaN. Journal of Materials Science: Materials in Electronics, 30(19), 18144–18152. https://doi.org/10.1007/s10854-019-02167-2 ( reposiTUm)

Grünbacher, M., Tarjomannejad, A., Kheyrollahi Nezhad, P. D., Praty, C., Ploner, K., Mohammadi, A., Niaei, A., Klötzer, B., Schwarz, S., Bernardi, J., Farzi, A., Gómez, M. J. I., Torregrosa Rivero, V., & Penner, S. (2019). Promotion of La(Cu0.7Mn0.3)0.98M0.02O3 d (M = Pd, Pt, Ru and Rh) perovskite catalysts by noble metals for the reduction of NO by CO. Journal of Catalysis, 379, 18–32. https://doi.org/10.1016/j.jcat.2019.09.005 ( reposiTUm)

Etemad, A., Dini, G., & Schwarz, S. (2018). Accumulative roll bonding (ARB)-processed high-manganese twinning induced plasticity (TWIP) steel with extraordinary strength and reasonable ductility. Materials Science and Engineering: A, 742, 27–32. https://doi.org/10.1016/j.msea.2018.10.119 ( reposiTUm)

Schmid, P., Zarfl, C., Triendl, F., Maier, F. J., Schwarz, S., Schneider, M., & Schmid, U. (2018). Impact of adhesion promoters and sputter parameters on theelectro-mechanical properties of Pt thin films at high temperatures. Sensors and Actuators A: Physical, 285, 149–157. https://doi.org/10.1016/j.sna.2018.11.010 ( reposiTUm)

Österreicher, J. A., Grabner, F., Schiffl, A., Schwarz, S., & Bourret, G. R. (2018). Information depth in backscattered electron microscopy of nanoparticles within a solid matrix. Materials Characterization, 138, 145–153. https://doi.org/10.1016/j.matchar.2018.01.049 ( reposiTUm)

Yakymovych, A., Kaptay, G., Flandorfer, H., Bernardi, J., Schwarz, S., & Ipser, H. (2018). The nano heat effect of replacing macro-particles by nano-particles in drop calorimetry: the case of core/shell metal/oxide nano-particles. RSC Advances, 8(16), 8856–8869. https://doi.org/10.1039/c7ra13643a ( reposiTUm)

Österreicher, J. A., Kumar, M., Schiffl, A., Schwarz, S., & Bourret, G. R. (2017). Secondary precipitation during homogenization of Al-Mg-Si alloys: Influence on high temperature flow stress. Materials Science and Engineering: A, 687, 175–180. https://doi.org/10.1016/j.msea.2017.01.074 ( reposiTUm)

Österreicher, J. A., Papenberg, N. P., Kumar, M., Ma, D., Schwarz, S., & Schlögl, C. M. (2017). Quantitative prediction of the mechanical properties of precipitationhardened alloys with special application to Al-Mg-Si. Materials Science and Engineering: A, 703, 380–385. https://doi.org/10.1016/j.msea.2017.07.080 ( reposiTUm)

Barriobero Vila, P., Biancardi Oliveira, V., Schwarz, S., Buslaps, T., & Requena, G. C. (2017). Tracking the αʺ martensite decomposition during continuous heating of a Ti-6Al-6V-2Sn alloy. Acta Materialia, 135, 132–143. https://doi.org/10.1016/j.actamat.2017.06.018 ( reposiTUm)

Kogler, M., Köck, E.-M., Stöger-Pollach, M., Schwarz, S., Schachinger, T., Klötzer, B., & Penner, S. (2016). Distinct carbon growth mechanisms on the components of Ni/YSZ materials. Materials Chemistry and Physics: Including Materials Science Communications, 173, 508–515. https://doi.org/10.1016/j.matchemphys.2016.02.046 ( reposiTUm)

Mayr, L., Klötzer, B., Schmidmair, D., Köpfle, N., Bernardi, J., Schwarz, S., Armbrüster, M., & Penner, S. (2016). Boosting Hydrogen Production from Methanol and Water by in situ Activation of Bimetallic Cu−Zr Species. ChemCatChem, 8(10), 1778–1781. http://hdl.handle.net/20.500.12708/148995 ( reposiTUm)

Mayr, L., Köpfle, N., Klötzer, B., Götsch, T., Bernardi, J., Schwarz, S., Keilhauer, T., Armbrüster, M., & Penner, S. (2016). Microstructural and Chemical Evolution and Analysis of a Self- Activating CO2‑Selective Cu−Zr Bimetallic Methanol Steam Reforming Catalyst. Journal of Physical Chemistry C, 120(44), 25395–25404. https://doi.org/10.1021/acs.jpcc.6b07824 ( reposiTUm)

Österreicher, J. A., Kumar, M., Schiffl, A., Schwarz, S., Hillebrand, D., & Bourret, G. R. (2016). Sample preparation methods for scanning electron microscopy of homogenized Al-Mg-Si billets: A comparative study. Materials Characterization, 122, 63–69. https://doi.org/10.1016/j.matchar.2016.10.020 ( reposiTUm)

Shawrav, M. M., Taus, P., Wanzenboeck, H. D., Schinnerl, M., Stöger-Pollach, M., Schwarz, S., Steiger-Thirsfeld, A., & Bertagnolli, E. (2016). Highly conductive and pure gold nanostructures grown by electron beam induced deposition. Scientific Reports, 6(34003). https://doi.org/10.1038/srep34003 ( reposiTUm)

Christian, R., Ikeda, M., Lientschnig, G., Prochaska, L., Prokofiev, A., Tomes, P., Yan, X., Zolriasatein, A., Bernardi, J., Schachinger, T., Schwarz, S., Steiger-Thirsfeld, A., Rogl, P., Populoh, S., Weidenkaff, A., & Paschen, S. (2016). Nanostructured clathrates and clathrate-based nanocomposites. Physica Status Solidi (a) – Applications and Materials Science, 12, 1–18. http://hdl.handle.net/20.500.12708/148353 ( reposiTUm)

Steinhäußer, F., Hradil, K., Schwarz, S., Artner, W., Stöger-Pollach, M., Steiger-Thirsfeld, A., Bittner, A., & Schmid, U. (2015). Wet chemical porosification of LTCC in phosphoric acid: Anorthite forming tapes. Journal of the European Ceramic Society, 35(15), 4181–4188. https://doi.org/10.1016/j.jeurceramsoc.2015.06.032 ( reposiTUm)

Steinhäußer, F., Hradil, K., Schwarz, S., Artner, W., Stöger-Pollach, M., Steiger-Thirsfeld, A., Bittner, A., & Schmid, U. (2015). Wet chemical porosification of LTCC in phosphoric acid: Celsian forming tapes. Journal of the European Ceramic Society, 35(16), 4465–4473. https://doi.org/10.1016/j.jeurceramsoc.2015.08.007 ( reposiTUm)

Rezqita, A., Hamid, R., Schwarz, S., Kronberger, H., & Trifonova, A. (2015). Conductive Additive for Si/Mesoporous Carbon Anode for Li-Ion Batteries:Commercial Graphite vs Carbon Black C65. ECS Transactions, 66(9), 17–27. http://hdl.handle.net/20.500.12708/152015 ( reposiTUm)

Stöber, L., Konrath, J. P., Krivec, S., Patocka, F., Schwarz, S., Bittner, A., Schneider, M., & Schmid, U. (2015). Impact of sputter deposition parameters on molybdenum nitride thin film properties. Journal of Micromechanics and Microengineering, 25(7), 074001. https://doi.org/10.1088/0960-1317/25/7/074001 ( reposiTUm)

Barriobero Vila, P., Requena, G., Schwarz, S., Warchomicka, F., & Buslaps, T. (2015). Influence of phase transformation kinetics on the formation of α in a β-quenched Ti-5Al-5Mo-5V-3Cr-1Zr alloy. Acta Materialia, 95, 90–101. https://doi.org/10.1016/j.actamat.2015.05.008 ( reposiTUm)

Benz, A., Krall, M., Schwarz, S., Dietze, D., Detz, H., Andrews, A. M., Schrenk, W., Strasser, G., & Unterrainer, K. (2014). Resonant metamaterial detectors based on THz quantum-cascade structures. Scientific Reports, 4(4269). https://doi.org/10.1038/srep04269 ( reposiTUm)

Khatibi, G., Weiss, B., Bernardi, J., & Schwarz, S. (2012). Microstructural investigation of interfacial features in Al wire bonds. Journal of Electronic Materials, 41(12), 3436–3446. https://doi.org/10.1007/s11664-012-2215-2 ( reposiTUm)

Radis, R., Schwarz, S., Zamberger, S., & Kozeschnik, E. (2011). AlN Precipitation During Isothermal Annealing of Ultra Low Carbon Steel. Steel Research International, 82(8), 905–910. http://hdl.handle.net/20.500.12708/162702 ( reposiTUm)

Dittert, B., Gavrilović, A., Schwarz, S., Angerer, P., Steiner, H., & Schöftner, R. (2011). Phase content controlled TiO2 nanoparticles using the MicroJetReactor technology. Journal of the European Ceramic Society, 31(14), 2475–2480. https://doi.org/10.1016/j.jeurceramsoc.2011.01.015 ( reposiTUm)

Stöger-Pollach, M., Steiger-Thirsfeld, A., & Schwarz, S. (2011). Low voltage TEM for semiconductor analysis. Journal of Physics: Conference Series, 326, 012027. https://doi.org/10.1088/1742-6596/326/1/012027 ( reposiTUm)

Haghofer, A., Sonström, P., Fenske, D., Föttinger, K., Schwarz, S., Bernardi, J., Al-Shamery, K., Bäumer, M., & Rupprechter, G. (2010). Colloidally Prepared Pt-Nanowires versus Impregnated Pt Nanoparticles: Comparison of Adsorption and Reaction Properties. Langmuir, 26(21), 16330–16338. http://hdl.handle.net/20.500.12708/166809 ( reposiTUm)

Lorenz, H., Jochum, W., Klötzer, B., Stöger-Pollach, M., Schwarz, S., Pfaller, K., & Penner, S. (2008). Novel methanol steam reforming activity and selectivity of pure In2O3. Applied Catalysis A: General, 347(1), 34–42. https://doi.org/10.1016/j.apcata.2008.05.028 ( reposiTUm)

Lorenz, H., Stöger-Pollach, M., Schwarz, S., Pfaller, K., Klötzer, B., Bernardi, J., & Penner, S. (2008). A new preparation pathway to well-defined In2O3 nanoparticles at low substrate temperatures. Journal of Physical Chemistry C, 112(4), 918–925. https://doi.org/10.1021/jp077354y ( reposiTUm)

Schwarz, S., & Gruber, J. (2025). Characterization of tire wear particle emissions with electron microscopy. In 15th ASEM Workshop on Advanced Electron Microscopy (pp. 66–66). https://doi.org/10.34726/9821 ( reposiTUm)

Schwarz, S. (2025). TEM investigation of hybrid MXene coatings of Ti3C2Tx and Nb2CTx for lubrication. In FEMS EUROMAT 2025 - Symposium Program (pp. 299–299). ( reposiTUm)

Dordevic, T., Schwarz, S., & Stöger-Pollach, M. (2024). Micro- to nano-scale weathering of Tl-bearing sulfide minerals. In 14th ASEM Workshop on Advanced Electron Microscopy (pp. 60–60). https://doi.org/10.34726/6361 ( reposiTUm)

Schwarz, S., & Baumann, C. (2024). Deformation on steel surface due to chipping. In 14th ASEM Workshop on Advanced Electron Microscopy (p. 83). https://doi.org/10.34726/6360 ( reposiTUm)

Konegger, T., Eßmeister, J. G., Fuchsberger, A.-M., Steiner, D., Schwarz, S., Schachinger, T., Lale, A., Schwentenwein, M., & Föttinger, K. (2024). Hierarchical structuring of ceramic and ceramic-metal hybrid materials via vat photopolymerization of preceramic polymer resins. In 48th International Conference & Exposition on Advanced Ceramics and Composites - ABSTRACT BOOK (pp. 149–150). http://hdl.handle.net/20.500.12708/194184 ( reposiTUm)

Dordevic, T., Stöger-Pollach, M., & Schwarz, S. (2024). Thallium and arsenic incorporation in romeite group minerals. In Abstract Book EMC2024 IM-06 - Diffraction Techniques and Structural Analysis. EMC 2024 Copenhagen, Kopenhagen, Denmark. http://hdl.handle.net/20.500.12708/200377 ( reposiTUm)

Schwarz, S., & Baumann, C. (2024). Deformation of steel chips due to machining. In K. Qvortrup & K. Weede Alexander (Eds.), The 17th European Microscopy Congress (EMC 2024). https://doi.org/10.1051/bioconf/202412923040 ( reposiTUm)

Đorđević, T., Stöger-Pollach, M., Schwarz, S., Tasev, G., Serafimovski, T., Boev, I., & Boev, B. (2024). Macro- to nanoscale mineral relationships in mining wastes of the As–Sb–Tl–Au Allchar mine, North Macedonia. In EGU General Assembly 2024. ERE – Energy, Resources and the Environment 2024, Wien, Austria. EGU. https://doi.org/10.5194/egusphere-egu24-5800 ( reposiTUm)

Dordevic, T., Stöger-Pollach, M., & Schwarz, S. (2024). Structural characterization of thallium (Tl) hosts in environmental samples. In R. T. Lechner & O. Paris (Eds.), The 12th European NESY Winterschool & Symposium on Neutron and Synchrotron Radiation : Including topical highlight lectures on Crystellographic Methods & The 1st Austrian Crystallography Day ACD ’24 (pp. 39–39). http://hdl.handle.net/20.500.12708/196669 ( reposiTUm)

Konegger, T., Eßmeister, J., Fuchsberger, A., Steiner, D., Schwarz, S., Schachinger, T., Lale, A., Schwentenwein, M., & Föttinger, K. (2024). Hierarchically porous ceramic materials via vat photopolymerization-induced phase-separation as catalysts for CO₂ methanation. In Book of Abstracts CMCEE14 (pp. 476–477). Akadémiai Kiadó. http://hdl.handle.net/20.500.12708/210504 ( reposiTUm)

Rauchenwald, E., Lessiak, M., Weissenbacher, R., Schwarz, S., & Haubner, R. (2019). Characterisation of chemical vapour deposited AlHfN coatings. In P. Horňak, M. Longauerova, & M. Matvija (Eds.), Metallography & Fractography, Book of Abstract (p. 19). http://hdl.handle.net/20.500.12708/50462 ( reposiTUm)

Shawrav, M. M., Taus, P., Wanzenböck, H. D., Schinnerl, M., Lugstein, A., Stöger-Pollach, M., Schwarz, S., Steiger-Thirsfeld, A., & Bertagnolli, E. (2016). Gas assisted purification of Electron Beam Induced Deposited noble metal nanostructures - Challenges and Applications in nanoelectronics. In 42nd International Conference on Micro and Nano Engineering (p. 80). http://hdl.handle.net/20.500.12708/75402 ( reposiTUm)

Shawrav, M. M., Taus, P., Wanzenböck, H. D., Schinnerl, M., Sistani, M., Lugstein, A., Stöger-Pollach, M., Schwarz, S., Steiger-Thirsfeld, A., & Bertagnolli, E. (2016). Highly conductive & (almost) pure gold deposition without post treatment - A fairy tale has come true? In FEBIP 2016 (p. 106). http://hdl.handle.net/20.500.12708/75401 ( reposiTUm)

Stöger-Pollach, M., Steiger-Thirsfeld, A., & Schwarz, S. (2011). Low voltage TEM for semiconductor analysis. In Journal of Physics: Conference Series (pp. 1–4). IOP Publishing. http://hdl.handle.net/20.500.12708/77821 ( reposiTUm)

Six, J., Schwarz, S., Wojcik, T., Ilie, S., & Kozeschnik, E. (2011). Simulation of the precipitation kinetics in low-carbon Nb-micro-alloyed steels. In Proceedings (p. 8). http://hdl.handle.net/20.500.12708/66413 ( reposiTUm)

Six, J., Schwarz, S., Ilie, S., & Kozeschnik, E. (2010). Analyse korngrenzennaher NbC-Ausscheidungen mittels Replica-Methode und Korrelation zum 2. Duktilitätsminimum. In G. Petzow (Ed.), Fortschritte in der Metallographie (pp. 57–62). Sonderbände der Praktischen Metallographie. http://hdl.handle.net/20.500.12708/66189 ( reposiTUm)

Schwarz, S., Radis, R., Kozeschnik, E., & Rumplmair, G. (2009). TEM investigations of the precipitation kinetics of Mn(Cu)S and AlN in microalloyed steel. In G. Kothleitner, M. Leisch, M. A. Pabst, G. Zellnig, W. Grogger, F. Hofer, & P. Pölt (Eds.), Mc 2009. Microscopy Conference, Graz, Austria. 30 August - 4 September 2009. First Joint Meeting Of Dreiländertagung And Multinational Congress On Microscopy. (pp. 253–254). Facultas Verlag. https://doi.org/10.3217/978-3-85125-062-6-499 ( reposiTUm)

Schwarz, S., & Stöger-Pollach, M. (2008). Characterisation: Analytical TEM investigations of precipitation hardening in Aluminum alloy 6016. In Aluminium Alloys (pp. 856–860). Wiley-VCH. http://hdl.handle.net/20.500.12708/77789 ( reposiTUm)

Schwarz, S., & Stöger-Pollach, M. (2008). EELS and EFTEM-investigations of aluminum alloy 6016 concerning the elements Al, Si and Mg. In EMC 2008; Preface Volume 1: Instrumentation and Methods. 14th European Microscopy Congress, Aachen, Germany, EU. Springer-Verlag, Berlin Heidelberg. https://doi.org/10.1007/978-3-540-85156-1 ( reposiTUm)

Perazzi, M., Leitgeb, M., Pfusterschmied, G., Vengattoor Raghu, A., Schmid, U., Zellner, C., Schwarz, S., Hahn, R., & Kirnbauer, A. (2023, September). High-temperature Reorganization Behavior of Porous 4H-SiC Thin Foils [Poster Presentation]. ICSCRM2023 - International Conference on Silicon Carbide and Related Materials, Sorrento, Italy. http://hdl.handle.net/20.500.12708/193349 ( reposiTUm)

Walter, T., Zareghomsheh, M., Khatibi, G., Popok, V., Kristensen, P., & Schwarz, S. (2021). Interfacial adhesion strength of III-N heterostructures. European Congress and Exhibition on Advanced Materials and Processes EUROMAT 2021, Graz, Austria. http://hdl.handle.net/20.500.12708/101736 ( reposiTUm)

Rauchenwald, E., Lessiak, M., Weissenbacher, R., Zalesak, J., Keckes, J., Schwarz, S., & Haubner, R. (2019). TEM characterisation of chemical vapour deposited AlHfN and AlZrN coatings. 20th conference on Solid State Analysis / 20. Tagung Festkörperanalytik, Wien, Austria. http://hdl.handle.net/20.500.12708/81076 ( reposiTUm)

Schwarz, S., Bernardi, J., Stöger-Pollach, M., & Löffler, S. (2019). Analytical Transmission Electron Microscopy for Investigations of Metals. 20th conference on Solid State Analysis / 20. Tagung Festkörperanalytik, Wien, Austria. http://hdl.handle.net/20.500.12708/81075 ( reposiTUm)

Han, J.-H., Kahr, J., Han, S.-H., Schwarz, S., & Trifonova, A. (2017). Carbon-Molybdeum Disulfide Composite As An Anode Material Candidate For Lithium Ion Batteries. E-MRS 2017, Strasbourg, France. http://hdl.handle.net/20.500.12708/81043 ( reposiTUm)

Österreicher, J. A., Schiffl, A., Grabner, F., Schwarz, S., Hüsing, N., & Bourret, G. R. (2017). Mikrostruktur und mechanische Eigenschaften von hochfesten Aluminium-Stangpressprofilen als Sicherheitsbauteile in Automobilen. 8. Landshuter Leichtbau-Colloquium, Landshut, Germany. http://hdl.handle.net/20.500.12708/81021 ( reposiTUm)

Wallisch, W., Stöger-Pollach, M., Hetaba, W., Schachinger, T., Steiger-Thirsfeld, A., Schwarz, S., & Bernardi, J. (2015). Analytical Electron Microscopy of FOXSI (Functional Oxide Surfaces and interfaces). 4th Annual SFB FOXSI Symposium, Stadtschlaining, Austria. http://hdl.handle.net/20.500.12708/80943 ( reposiTUm)