Pamminger, R., Glaser, S., & Wimmer, W. (2021). Modelling of different Circular End-of-use Scenarios for Smartphones. International Journal of Life Cycle Assessment, 26(3), 470–482. https://doi.org/10.1007/s11367-021-01869-2 ( reposiTUm)

Wimmer, W., Ostad Ahmad Ghorabi, H., Pamminger, R., & Huber, M. (2008). Product innovation through ecodesign. International Journal of Sustainable Design, 1(1), 75–92. http://hdl.handle.net/20.500.12708/170099 ( reposiTUm)

Pamminger, R., Wimmer, W., & Ostad Ahmad Ghorabi, H. (2006). Ecodesign leicht gemacht - In sechs Schritten zum umweltgerechten Produkt. Elektronik Ecodesign - Fachmagazin Für Grüne Elektronik, SEPTEMBER, 40–44. http://hdl.handle.net/20.500.12708/174124 ( reposiTUm)

Pont, U., Schober, K. P., Swoboda, S., Riedel, P. G. M., Ladentrog, A., & Matzinger, I. (2025). Reuse-Woodhouses – Approaches to Circularity for prefabricated Timberhouses. In M. Franz, B.-M. Köck, B. Mihalyi-Schneider, R. Pamminger, S. Papadokonstantakis, V. Parravicini, D. C. Rosenfeld, & W. Wimmer (Eds.), 1st LCA–Symposium at TUW : 16 June 2025 : Application of life cycle assessment (LCA) and sustainability assessment (LCSA) in technology development – opportunities and challenges :  Abstract Booklet (pp. 16–17). Eigenverlag, TU-Wien. http://hdl.handle.net/20.500.12708/216583 ( reposiTUm)

Orehounig, K., Mukhamadiyeva, Z., Thrampoulidis, E., Dominguez, C., Kakkos, E., Gross, D., Hischier, R., & Mavromatidis, G. (2025). Renovate or replace – Finding the optimal decision for buildings considering cumulative CO₂ emissions. In M. Franz, B.-M. Köck, B. Mihalyi-Schneider, R. Pamminger, S. Papadokonstantakis, V. Parravicini, D. C. Rosenfeld, & W. Wimmer (Eds.), 1st LCA–Symposium at TUW 16 June 2025 Application of life cycle assessment (LCA) and sustainability assessment (LCSA) in technology development – opportunities and challenges - Abstract Booklet (pp. 14–14). Eigenverlag, TU Wien. http://hdl.handle.net/20.500.12708/216584 ( reposiTUm)

Pamminger, R., Glaser, S., Ambrosch, R., & Genner, M. (2020). Upscaling of collaborative disassembly lines for mobile phones - economic and environmental considerations. In Proceedings of the International Symposium for Production Research 2019 (pp. 442–451). Springer. http://hdl.handle.net/20.500.12708/68044 ( reposiTUm)

Schmidt, S., Pamminger, R., & Wimmer, W. (2019). Der Circular Economy Analyst, Ein Tool zur Quantifizierung des Umweltnutzens von Kreislaufstrategien. In Sustainability Management for Industries 8 (pp. 1–10). Rainer Hampp Verlag. http://hdl.handle.net/20.500.12708/68054 ( reposiTUm)

Celades, I., Rocha, C., Camocho, D., Schmidt, K., Pamminger, R., Schmidt, S., Kalleitner-Huber, M., Veral, S., & Ros, T. (2017). KATCH_e: Introducing Circular Economy into higher-education design curricula - Overview of the training needs, state of the art, trends and policies. In Proceedings of the 18th European Roundtable on Sustainable Consumption and Production - Towards a Greener Challenge & Evolution in the Framework of the Circular Economy (pp. 887–896). Grafima Publications. http://hdl.handle.net/20.500.12708/67695 ( reposiTUm)

Pamminger, R., Kuso, S., Wimmer, W., & Podhradsky, G. (2016). Re-design of a Digital Voice Recorder to meet the needs of Circular Economy - Status Analysis. In Proceedings of International Congress Electronics Goes Green 2016+ (pp. 1–10). http://hdl.handle.net/20.500.12708/67462 ( reposiTUm)

Krautzer, F., Pamminger, R., Diver, C., & Wimmer, W. (2015). Assessing the environmental performance of machine tools - Case studies applying the “LCA to go” Webtool. In 22nd CIRP Conference on Life Cycle Engineering 2015 (pp. 502–508). Elsevier Procedia. http://hdl.handle.net/20.500.12708/67415 ( reposiTUm)

Pamminger, R., Diaz, A., Wimmer, W., & Hennig, M. (2014). ECODESIGN+ A webbased tool for assessing the carbon footprint of products. In B. Kopacek (Ed.), Going Green Care Innovation - Proceedings (p. 1). SAT. http://hdl.handle.net/20.500.12708/67417 ( reposiTUm)

Diaz, A., Pamminger, R., & Wimmer, W. (2014). Ecodesign methodology for textile coverings used in the European construction and transport industry. In R. Kovačič Lukman (Ed.), ERSCP 2014 14-16 October 2014 Portoroz, Slovenia (pp. 926–935). Nigrad d.d., Maribor, 2014. http://hdl.handle.net/20.500.12708/67416 ( reposiTUm)

Pamminger, R., Krautzer, F., Wimmer, W., & Schischke, K. (2013). “LCA to go” -Environmental Assessment of Machine Tools according to Requirements of Small and Medium-sized Enterprises (SMEs) - Development of the Methodological Concept. In Re-engineering Manufacturing for Sustainability (pp. 481–486). Springer. http://hdl.handle.net/20.500.12708/66874 ( reposiTUm)

Pamminger, R., Gottschall, S., & Wimmer, W. (2012). “LCA to go” -Environmental Assessment of Machine Tools according to Requirements of Small and Medium-sized Enterprises (SMEs) - Development of the Methodological Concept. In S. Hinduja & L. Li (Eds.), Proceedings of the 37th International MATADOR Conference (pp. 113–116). Springer Verlag. http://hdl.handle.net/20.500.12708/66647 ( reposiTUm)

Pamminger, R., Wimmer, W., & Adamek, H. (2010). Integration von Umweltaspekten in den Produktentwicklungsprozess von Straßenbahnen. In ZEVrail, Sonderheft Tagungsband, Moderne Schienenfahrzeuge (pp. 150–156). Georg Siemens Verlag GmbH & Co.KG. http://hdl.handle.net/20.500.12708/66137 ( reposiTUm)

Pamminger, R. (2010). Integration von Umweltaspekten in den Entwicklungsprozess von Straßenbahnen. In Strassenbahn (pp. 91–101). Interdisziplinärer Forschungsverbund Bahntechnik e.V.,. http://hdl.handle.net/20.500.12708/66138 ( reposiTUm)

Pamminger, R., Wimmer, W., & Adamek, H. (2010). Integration of environmental aspects into the product development process of Light Rail Vehicles. In Abstract book SETAC Europe Annual Meeting 2010 Seville. SETAC Europe Annual Meeting 2010, Seville, EU. SETAC Europe. http://hdl.handle.net/20.500.12708/66181 ( reposiTUm)

Pamminger, R., Wimmer, W., Huber, M., & Bauer, M. (2008). Die ökointelligente Spritzgießmaschine- Wettbewerbsvorteile durch umweltgerechte Produktentwicklung/ECODESIGN. In VDI Wissensforum GmbH (Ed.), Spritzgie0en 2008 - Innovation und Produktivität (pp. 13–25). VDI Kunststofftechnik. http://hdl.handle.net/20.500.12708/65722 ( reposiTUm)

Pamminger, R., Huber, M., & Wimmer, W. (2007). ECODESIGN Toolbox for the Development of Green Product Concepts - Case study digital voice recorder. In Design for Society Knowledge, innovation and sustainability (p. 10). http://hdl.handle.net/20.500.12708/65648 ( reposiTUm)

Pamminger, R., Wimmer, W., Huber, M., & Bauer, M. (2007). ECODESIGN Toolbox for the Development of Green Product Concepts - Case study injection moulding machine. In Integration of social system design, business strategies, and Technologies by the EcoDesign approach under the global energy crisis era (p. 8). http://hdl.handle.net/20.500.12708/65649 ( reposiTUm)

Huber, M., Pamminger, R., & Wimmer, W. (2007). Ecodesign in a life cycle perspective, Waste prevention of products - a question of design and consumer patterns. In Waste matters. Integrating views (pp. 315–324). Facultas.wuv. http://hdl.handle.net/20.500.12708/65659 ( reposiTUm)

Huber, M., Pamminger, R., & Wimmer, W. (2007). ECODESIGN Toolbox for the Development of Green Product Concepts - Applied examples from industry. In Proceedings of ECO-X 2007 (pp. 253–262). http://hdl.handle.net/20.500.12708/65660 ( reposiTUm)

Pamminger, R., Huber, M., & Wimmer, W. (2006). The Use of the Electric and Electronic Equipment-PILOT in the ECODESIGN Toolbox for the Development of Green Product Concepts. In PRACE - Przemyslawego Instytutu Elektroniki (pp. 11–19). http://hdl.handle.net/20.500.12708/65465 ( reposiTUm)

Pamminger, R., Wimmer, W., Huber, M., & Ostad Ahmad Ghorabi, H. (2006). THE ECODESIGN TOOLBOX FOR THE DEVELOPMENT OF GREEN PRODUCT CONCEPTS - FIRST STEPS FOR PRODUCT IMPROVEMENT. In Going Green CARE INNOVATION 2006, Proceedings. Care Innovation 2006, Wien, Austria. Special Issue of IJAA. http://hdl.handle.net/20.500.12708/65466 ( reposiTUm)

Wimmer, W., Pamminger, R., & Stachura, M. (2005). Der ECODESIGN EEG-PILOT, eine Anpassung des Produkt- Innovations-, Lern- und Optimierungs-Tool zur Entwicklung umweltgerechter Elektro- und Elektronikgeräte. In Proceedings of eco-X ecology and economy in electroniX 2005 (pp. 343–355). http://hdl.handle.net/20.500.12708/65303 ( reposiTUm)

Wimmer, W., Pamminger, R., Stachura, M., & Grab, R. (2005). ECODESIGN in the electronics industry - achieving legal compliance with the EU-directives and environmentally improving products by using the new EEE-Pilot. In EcoDesign 2005 (p. 7). http://hdl.handle.net/20.500.12708/65300 ( reposiTUm)

Schischke, K., Proske, M., Pamminger, R., Glaser, S., Nissen, N. F., & Schneider-Ramelow, M. (2021). The “Environmental Activation Energy” of Modularity and Conditions for an Environmental Payback. In Z. S. Klos, J. Kalkowska, & J. Kasprzak (Eds.), Towards a Sustainable Future - Life Cycle Management - Challenges and Prospects (pp. 15–25). Springer. https://doi.org/10.1007/978-3-030-77127-0_2 ( reposiTUm)

Pamminger, R., Sehnal, E., & Wimmer, W. (2010). Energy efficiency labelling and criteria development for communicating energy efficiency of plastic processing machines. In F. Gardiner & E. Garmson (Eds.), Plastics and the Environment (pp. 39–57). Smithers Rapra. http://hdl.handle.net/20.500.12708/26952 ( reposiTUm)

Gebetsroither Michaela, Honic, M., Kovacic, I., Löffler, C., Marx, K., Pamminger, R., Robbi, S., Sustr, C., Schützenhofer, S., & Weber, G. (Eds.). (2023). Paradigmenwechsel in Bau- und Immobilienwirtschaft : Mit Kreislaufwirtschaft und Digitalisierung die Zukunft gestalten. Springer Spektrum. https://doi.org/10.1007/978-3-662-68276-0 ( reposiTUm)

Ostad Ahmad Ghorabi, H., Huber, M., & Pamminger, R. (Eds.). (2007). Ecodesign for Sustainable Development - Volume 4 - Product Development (with CD ROM). Transilvania University of Brasov. http://hdl.handle.net/20.500.12708/23125 ( reposiTUm)

Jasch, C., Hammerl, B., Hammer, M., Pamminger, R., Kaltenegger, I., & Hinterberger, F. (2006). Produkte und Dienstleistungen von morgen Nachhaltige Innovationen für Firmen und KonsumentInnen, Band 1, Ernährung. Wohnen. Mobilität. Energie. Books on Demand GmbH. http://hdl.handle.net/20.500.12708/22718 ( reposiTUm)

Jasch, C., Hammerl, B., Hammer, M., Pamminger, R., Kaltenegger, I., & Hinterberger, F. (2006). Produkte und Dienstleistungen von morgen Nachhaltige Innovationen für Firmen und KonsumentInnen, Band 2: Chemie, Reinigung, Maschinen, Recycling. Books on Demand GmbH. http://hdl.handle.net/20.500.12708/22719 ( reposiTUm)

Pamminger, R., Wimmer, W., & Glaser, S. (2023, July 7). Cost based „potential finder“ to reduce GHG emissions of material goods [Conference Presentation]. SCP23: SCORAI-ERSCP-WUR Conference "Transforming consumption-production systems toward just and sustainable futures”, Wageningen, Netherlands (the). ( reposiTUm)

Pamminger, R. (2023, September 19). Strategien und Methoden zur Umsetzung der Kreislaufwirtschaft in Elektro- und Elektronikprodukten [Presentation]. Am Weg zur zirkulären EEE-Branche: Keynotes & Erfahrungsaustausch 2023, Linz, Austria. ( reposiTUm)

Pamminger, R., Wimmer, W., & Glaser, S. (2023, September 8). Cost-based „potential finder“ to reduce GHG emissions of material goods [Poster Presentation]. 11th International Conference on Life Cycle Management 2023, Lille, France. ( reposiTUm)

Pamminger, R., Glaser, S., Wimmer, W., & Schmidt, S. (2020). Methodology to Assess the Circularity of Product Design for Mobile Electronics. Electronics Goes Green 2020, Online due to Covid / Berlin, Germany. http://hdl.handle.net/20.500.12708/95449 ( reposiTUm)

Schmidt, S., Pamminger, R., Wimmer, W., Rocha, C., Camocho, D., & Alexandre, J. (2019). The CE Strategist - A learning tool to identify new circular business opportunities and adapt the business model. 19th European Roundtable for Sustainable Consumption and Production (ERSCP), Barcelona, Spain. http://hdl.handle.net/20.500.12708/95450 ( reposiTUm)

Ambrosch, R., Ambrosch, E., Pamminger, R., Glaser, S., & Regenfelder, M. (2018). Automation of Smartphone Disassembly: Collaborative Approach. Going Green Care Innovation, Wien, Austria. http://hdl.handle.net/20.500.12708/95164 ( reposiTUm)

Pamminger, R., Glaser, S., Wimmer, W., & Podhradsky, G. (2018). Guideline development to design modular products that meet the needs of circular economy. Going Green Care Innovation, Wien, Austria. http://hdl.handle.net/20.500.12708/95162 ( reposiTUm)

Regenfelder, M., & Pamminger, R. (2018). New Business Models for Circular Economy. Going Green Care Innovation, Wien, Austria. http://hdl.handle.net/20.500.12708/95167 ( reposiTUm)

Pamminger, R., & Diver, C. (2013). LCA to Go: Deriving improvement potentials of industrial machines using Environmental Assessment. TEMPO Seminar, Cork, Ireland, EU. http://hdl.handle.net/20.500.12708/93681 ( reposiTUm)

Krautzer, F., Pamminger, R., Diver, C., Wimmer, W., & Schischke, K. (2013). Environmental Assessment Of Industrial Machines - A New Web-Based Concept Applied To The Edm Process. IMC30 Conference, University College Dublin, EU. http://hdl.handle.net/20.500.12708/93680 ( reposiTUm)

Pamminger, R., & Wimmer, W. (2005). ECODESIGN in 12 steps - a systematic approach to integrate environmental considerations into product design and development. 2nd VIDA Conference, Virtual Design and Automation - New Trends in Collaborative Product Design, Poznan, Polen, EU. http://hdl.handle.net/20.500.12708/92251 ( reposiTUm)

Pamminger, R. (2005). EEG-Pilot - Tool for WEEE/RoHS conformity. 2nd VIDA Conference, Virtual Design and Automation - New Trends in Collaborative Product Design, Poznan, Polen, EU. http://hdl.handle.net/20.500.12708/92252 ( reposiTUm)

Pamminger, R., Wimmer, W., & Winkler, R. (2010). Entwicklung von Kriterien zur Kommunikation der Energieeffizienz von Kunststoff verarbeitenden Maschinen (5/2010). http://hdl.handle.net/20.500.12708/36253 ( reposiTUm)

Wimmer, W., Pamminger, R., & Winkler, R. (2009). Energiedienstleistung zur Steigerung der Energieeffizienz von Spritzgießmaschinen im Kunststoffbereich (55/2010). http://hdl.handle.net/20.500.12708/36254 ( reposiTUm)

Wimmer, W., Judmaier, P., Huber, M., & Pamminger, R. (2008). Konzeption eines ECODESIGN Lernspiels für Schulen und Jugendorganisationen (43/2008). http://hdl.handle.net/20.500.12708/36256 ( reposiTUm)

Jasch, C., Hammerl, B., Hammer, M., Pamminger, R., Kaltenegger, I., Hinterberger, F., Wimmer, W., & Hrauda, G. (2006). Leuchttürme für industrielle Produkt-Dienstleistungssysteme - Potentialerhebung in Europa und Anwendbarkeit in Österreich (15/2006). http://hdl.handle.net/20.500.12708/34690 ( reposiTUm)

Pamminger, R., & Wimmer, W. (2023, September). CO₂-Fußabdruck als Indikator für EU-Taxonomie-konforme Kreislauf-Strategien im Bauwesen. OiB aktuell -  Fachmagazin für Baurecht und Technik, 3/2023, 30–34. http://hdl.handle.net/20.500.12708/191999 ( reposiTUm)

Pamminger, R. (2011). Design for environment - systematischer Ansatz zur Integration von umweltrelevanten Anforderungen in den Produktentwicklungsprozess am Anwendungsbeispiel der Straßenbahn Valencia [Dissertation, Technische Universität Wien]. reposiTUm. http://hdl.handle.net/20.500.12708/160728 ( reposiTUm)