Hahn, F. J. J., Maly, A., Semlitsch, B., & Bauer, C. (2023). Numerical Investigation of Pelton Turbine Distributor Systems with Axial Inflow. Energies, 16(6), Article 2737. https://doi.org/10.3390/en16062737 ( reposiTUm)

Unterluggauer, J., Sulzgruber, V., Doujak, E., & Bauer, C. (2020). Experimental and numerical study of a prototype Francis turbine startup. Renewable Energy, 157, 1212–1221. https://doi.org/10.1016/j.renene.2020.04.156 ( reposiTUm)

Unterluggauer, J., Doujak, E., & Bauer, C. (2019). Numerical Fatigue Analysis of a Prototype Francis Turbine Runner in Low-Load Operation. International Journal of Turbomachinery, Propulsion and Power, 4(3), 21. https://doi.org/10.3390/ijtpp4030021 ( reposiTUm)

Hahn, F., Unterluggauer, J., & Bauer, C. (2019). Performance improvement of a mixed-flow pump by means of multi-objective optimization. WASSERWIRTSCHAFT, 109(S1), 31–36. https://doi.org/10.1007/s35147-019-0231-3 ( reposiTUm)

Unterluggauer, J., Doujak, E., & Bauer, C. (2019). Fatigue analysis of a prototype Francis turbine based on strain gauge measurements. WASSERWIRTSCHAFT, 109(S1), 66–71. https://doi.org/10.1007/s35147-019-0238-9 ( reposiTUm)

Maly, A., Eichhorn, M., & Bauer, C. (2019). Experimental investigation of transient pressure effects in the side chambers of a reversible pump turbine model. WASSERWIRTSCHAFT, 109(S1), 95–100. https://doi.org/10.1007/s35147-019-0243-z ( reposiTUm)

Eichhorn, M., Waldner, L., & Bauer, C. (2019). Fatigue analysis of a medium head Francis Runner at low-load operation using numerical investigations. WASSERWIRTSCHAFT, 109(S1), 54–59. https://doi.org/10.1007/s35147-019-0235-z ( reposiTUm)

Lenarcic, M., Bauer, C., Giese, M., & Jung, A. (2019). Improvement in the stability of S-shaped characteristics by using misaligned guide vanes. WASSERWIRTSCHAFT, 109(S1), 118–123. https://doi.org/10.1007/s35147-019-0247-8 ( reposiTUm)

Maly, A., Käfer, K., & Bauer, C. (2019). Flow phenomena in a model pump turbine at synchronous condenser mode - description of test rig. WASSERWIRTSCHAFT, 109(S1), 19–24. https://doi.org/10.1007/s35147-019-0213-5 ( reposiTUm)

Bauer, C., & Doujak, E. (2017). Aktueller Stand zur Entwicklung einer modularen Pumpturbine im niedrigen Leistungsbereich. Wasserwirtschaft, 107(10), 54–58. http://hdl.handle.net/20.500.12708/146411 ( reposiTUm)

Erne, S., Edinger, G., Maly, A., & Bauer, C. (2017). Simulation and Experimental Investigation of the Stay Vane Channel Flow in a Reversible Pump Turbine at Off-Design Conditions. Periodica Polytechnica Mechanical Engineering, 61(2), 94. https://doi.org/10.3311/ppme.9345 ( reposiTUm)

Lenarcic, M., & Bauer, C. (2015). Numerical Investigations of the unsteady Flow in a high-head Francis Turbine using FOAM-extend. Wasserwirtschaft, 105(1), 33–37. http://hdl.handle.net/20.500.12708/150835 ( reposiTUm)

Gössinger, S., Bauer, C., & Lechner, C. (2015). Using Machine Hammer to Reduce Friction in Turbulent Fluid Flows. Wasserwirtschaft, 105(1), 120–124. http://hdl.handle.net/20.500.12708/150768 ( reposiTUm)

Bhattarai, N., Bajracharya, I., Bauer, C., & Doujak, E. (2015). Study on Residential Sector’s Energy Demand of Nepal for Proper Supply Side Management. Wasserwirtschaft, 105(1), 94–98. http://hdl.handle.net/20.500.12708/150769 ( reposiTUm)

Ruppert, L., Käfer, K., & Bauer, C. (2015). Optimizing Steady Operating Points of Several Generating unit Systems for Transient Applications. Wasserwirtschaft, 105(1), 63–67. http://hdl.handle.net/20.500.12708/151031 ( reposiTUm)

Gössinger, S., Doujak, E., Bauer, C., & Lenarcic, M. (2014). Nachhaltige Energieplanung und Analyse in Nepal. Österreichische Zeitschrift Für Soziologie, 36(2), 55–73. https://doi.org/10.1007/s11614-011-0033-z ( reposiTUm)

Bauer, C., & Gössinger, S. (2014). Die Entwicklung der Kaplan-Turbine. WASSERWIRTSCHAFT, 104(6), 26–32. http://hdl.handle.net/20.500.12708/156638 ( reposiTUm)

Doujak, E., Unterberger, P., & Bauer, C. (2013). Können Pumpturbinen kleinerer Leistung einen Beitrag zur Energiewende liefern? Zek Hydro, FEBRUAR, 53–57. http://hdl.handle.net/20.500.12708/154791 ( reposiTUm)

Unterberger, P., Doujak, E., & Bauer, C. (2013). Entwicklung kleiner Pumpturbinen - Vorteile eines modularen Ansatzes. WASSERWIRTSCHAFT, 103(7–8), 47–51. https://doi.org/10.1365/s35147-013-0650-5 ( reposiTUm)

Doujak, E., Unterberger, P., & Bauer, C. (2012). Modulare Pumpturbine als Unterstützung bei der Einbindung alternativer Energien ins dezentrale Stromnetz. VGB PowerTech, 9, 68–77. http://hdl.handle.net/20.500.12708/163952 ( reposiTUm)

Hahn, F. J. J., Semlitsch, B., & Bauer, C. (2022). On the numerical assessment of flow losses and secondary flows in Pelton turbine manifolds. In 31st IAHR Symposium on Hydraulic Machinery and Systems 26/06/2022 - 01/07/2022 Trondheim, Norway (pp. 1–10). IOP. https://doi.org/10.1088/1755-1315/1079/1/012082 ( reposiTUm)

Hahn, F. J. J., Maly, A., Semlitsch, B., & Bauer, C. (2022). Numerical investigation of the secondary flow pattern in a Pelton turbine jet. In Proceedings of the 3rd IAHR Young Professionals Congress (pp. 121–122). International Association for Hydro-Environment Engineering and Research. https://doi.org/10.34726/3545 ( reposiTUm)

Unterluggauer, J., Doujak, E., & Bauer, C. (2019). Numerical Fatigue Analysis of a Prototype Francis Turbine Runner in Low-Load Operation. In Proceedings of 13th European Confernce on Turbomachinery Fluid Dynamics $ Thermodynamics (p. 13). http://hdl.handle.net/20.500.12708/67984 ( reposiTUm)

Unterluggauer, J., Doujak, E., & Bauer, C. (2019). Experimental and numerical study of a prototype Francis turbine startup. In Proceedings 2nd IHAR Asia-Symposium (p. 10). http://hdl.handle.net/20.500.12708/68059 ( reposiTUm)

Hahn, F. J. J., Unterluggauer, J., & Bauer, C. (2018). Performance improvement of a mixed-flow pump by means of multi-objective optimization. In 20. Internationales Seminar Wasserkraftanlagen (pp. 761–773). http://hdl.handle.net/20.500.12708/67926 ( reposiTUm)

Maly, A., Käfer, K., & Bauer, C. (2018). Flow phenomena in a model pump turbine at synchronous condenser mode - description of test rig. In 20. Internationales Seminar Wasserkraftanlagen (pp. 789–798). http://hdl.handle.net/20.500.12708/67927 ( reposiTUm)

Unterluggauer, J., Doujak, E., & Bauer, C. (2018). Fatigue analysis of a prototype Francis turbine based on strain. In 20. Internationales Seminar Wasserkraftanlagen (pp. 707–720). http://hdl.handle.net/20.500.12708/67925 ( reposiTUm)

Steidl, B., Klar, R., Gabi, R., Käfer, K., & Bauer, C. (2018). Prepare bouyant energy - innovative concept for hydraulic offshore energy storage. In 20. Internationales Seminar Wasserkraftanlagen (pp. 165–176). http://hdl.handle.net/20.500.12708/67928 ( reposiTUm)

Willinger, R. (2018). Performance Characteristic of a Single-Blade Pump From the Viewpoint of a Positive Displacement Machine. In E. Doujak & C. Bauer (Eds.), 20. Internationales Seminar Wasserkraftanlagen (pp. 129–138). http://hdl.handle.net/20.500.12708/67855 ( reposiTUm)

Steinrück, H., & Maly, A. (2018). The growth of a gravity wave in a cylindrical container. In E. Doujak & C. Bauer (Eds.), 20th International Seminar on Hydropower Plants (pp. 775–788). http://hdl.handle.net/20.500.12708/67848 ( reposiTUm)

Ruppert, L., Schürhuber, R., & Bauer, C. (2017). Technisch-wirtschaftliche Untersuchung verschiedener Großspeicherlösungen. In IEWT 2017 (pp. 444–445). http://hdl.handle.net/20.500.12708/67619 ( reposiTUm)

Lenarcic, M., Bauer, C., Giese, M., & Jung, A. (2016). Prediction of S-shaped characteristics in reversible pump-turbines using different numerical approaches. In Proceedings of the 28th IAHR Symposium on Hydraulic Machines and Systems (p. 10). http://hdl.handle.net/20.500.12708/67435 ( reposiTUm)

Linhardt, P. (2016). From Corrosion Failures To Risk Assessment Of Microbial Corrosion In Hydroelectric Power Plants. In E. Doujak & C. Bauer (Eds.), 19th International Seminar on Hydropower Plants (pp. 303–310). http://hdl.handle.net/20.500.12708/49538 ( reposiTUm)

Ruppert, L., Maier, C., & Bauer, C. (2016). Service of Different Pumped-Storage Schemes for an Electrical Grid with increased Renewable Energy Generation. In 19th International Seminar on Hydropower Plants - Flexible Operation of Hydropower Plants in the Energy System (pp. 707–717). http://hdl.handle.net/20.500.12708/67472 ( reposiTUm)

Maly, A., Eichhorn, M., & Bauer, C. (2016). Experimental Investigation of transient pressure effects in the side chambers of a reversible pump turbine model. In 19th International Seminar on Hydropower Plants - Flexible Operation of Hydropower Plants in the Energy System (pp. 675–684). http://hdl.handle.net/20.500.12708/67525 ( reposiTUm)

Eichhorn, M., Waldner, L., & Bauer, C. (2016). Fatigue analysis of a medium head Francis runner at low-load operation using numerical investigations. In 19th International Seminar on Hydropower Plants - Flexible Operation of Hydropower Plants in the Energy System (pp. 655–664). http://hdl.handle.net/20.500.12708/67526 ( reposiTUm)

Lenarcic, M., Bauer, C., Giese, M., & Jung, A. (2016). Improvement in the stability of S-shaped characteristics by using misaligned guide vanes. In 19th International Seminar on Hydropower Plants - Flexible Operation of Hydropower Plants in the Energy System (pp. 665–674). http://hdl.handle.net/20.500.12708/67527 ( reposiTUm)

Bhattarai, N., Bauer, C., & Doujak, E. (2014). Residential Sector Energy Demand Projection and Analysis of Nepal for Sustainable Utilization of Local Hydropower Resources. In 18. International Seminar on Hydropower Plants - Innovations and Development Needs for Sustainable Growth of Hydropower (pp. 845–866). http://hdl.handle.net/20.500.12708/67091 ( reposiTUm)

Bajracharya, T. R., Shakya, S. R., Nakarmi, A. M., Ale, B. B., Shrestha, R., Bauer, C., Doujak, E., & Gössinger, S. (2014). Energy Systems Planning and Analysis in Terms of Nepal. In 18. International Seminar on Hydropower Plants - Innovations and Development Needs for Sustainable Growth of Hydropower (pp. 31–46). http://hdl.handle.net/20.500.12708/67119 ( reposiTUm)

Edinger, G., Erne, S., Doujak, E., & Bauer, C. (2014). Flow determination of a pump-turbine at zero discharge. In 27th IAHR Symposium on Hydraulic Nachinery and Systems (p. 11). http://hdl.handle.net/20.500.12708/67096 ( reposiTUm)

Erne, S., Edinger, G., Doujak, E., & Bauer, C. (2014). Numerical and Experimental Investigation on Unsteady Inflow Conditions of a Pump-Turbine. In Proceedings of the ASME 2014 4th Joint US-European Fluids Engineering Division Summer Meeting (p. 9). http://hdl.handle.net/20.500.12708/67088 ( reposiTUm)

Ruppert, L., Käfer, K., & Bauer, C. (2014). Steady Efficiency Optimization of several hydraulic generating unit systems. In 18. International Seminar on Hydropower Plants - Innovations and Development Needs for Sustainable Growth of Hydropower (pp. 477–486). http://hdl.handle.net/20.500.12708/67170 ( reposiTUm)

Bajracharya, I., Bauer, C., & Doujak, E. (2014). Assessment of run-of-river hydro potential of the Sunkosi river using geographoc information system (GIS). In 18. International Seminar on Hydropower Plants - Innovations and Development Needs for Sustainable Growth of Hydropower (pp. 857–866). http://hdl.handle.net/20.500.12708/67172 ( reposiTUm)

Gössinger, S., Bauer, C., & Lechner, C. (2014). Using machine hammer peening to realize defined surface structure in order to reduce friction in turbulent fluid flows - part 2. In 18. International Seminar on Hydropower Plants - Innovations and Development Needs for Sustainable Growth of Hydropower (pp. 751–764). http://hdl.handle.net/20.500.12708/67173 ( reposiTUm)

Lenarcic, M., Eichhorn, M., Schoder, S. J., & Bauer, C. (2014). Numerical investigation of a high head Francis turbine under steady operating conditions using foam-extend. In Journal of Physics: Conference Series (p. 012008). Journal of Physics . Conference Series. https://doi.org/10.1088/1742-6596/579/1/012008 ( reposiTUm)

Doujak, E., Unterberger, P., Steiner, P., & Bauer, C. (2014). Numerical Investigation on the spiral case of a fully variable speed multistage pump turbine. In 15th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (p. 10). http://hdl.handle.net/20.500.12708/66987 ( reposiTUm)

Unterberger, P., Doujak, E., & Bauer, C. (2014). Numerical Investigation on a pumpturbine stage with fully vaned return-channel geometry. In 15th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (p. 8). http://hdl.handle.net/20.500.12708/66988 ( reposiTUm)

Lenarcic, M., Erne, S., & Bauer, C. (2013). Improvement in performance parameters by shape optimization of a conical flow around diffuser. In Proceedings of the 6th International Conference on Adaptive Modeling and Simulation (pp. 423–434). http://hdl.handle.net/20.500.12708/66776 ( reposiTUm)

Erne, S., Edinger, G., Doujak, E., Bauer, C., List, B., & Gaschl, J. (2013). CFD validation of inlet flow of a pump-turbine in pump mode, operating at part load. In Conference papers of Hydro 2013 - Promoting the Versatile Role of Hydro (p. 7). Aqua-Media International. http://hdl.handle.net/20.500.12708/66836 ( reposiTUm)

Hammer, A., Götsch, H., & Käfer, K. (2012). Creating a hydraulic simulation prgram for hydropower plants in Matlab/Simulink with special interest on the surge tank behaviour and the hydraulic instability of pump turbines. In E. Doujak & C. Bauer (Eds.), Pumped storage in the context of renewable energy supply (pp. 695–699). http://hdl.handle.net/20.500.12708/66786 ( reposiTUm)

Gössinger, S., Bauer, C., Lechner, C., & Bleicher, F. (2012). Using Machine Hammer Peening to Realize Defined Surface Structures in Order to Reduce Friction in Turbulent Fluid Flows. In Pumped storage in the context of renewable energy supply (pp. 379–388). http://hdl.handle.net/20.500.12708/66681 ( reposiTUm)

Doujak, E., Unterberger, P., Bauer, C., & Samonig, M. (2012). Modular Concept for Decentraliced Pump Storage Systems A Small Hydro Approach. In 14th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (p. 8). Technische Universität Darmstadt. http://hdl.handle.net/20.500.12708/66524 ( reposiTUm)

Lechner, C., Bleicher, F., Habersohn, C., Bauer, C., & Gössinger, S. (2012). The use of Machine Hammer Peening technology for smoothening and structuring of surfaces. In Annals of DAAAM for 2012 & Proceedings of the 23rd International DAAAM Symposium (pp. 331–337). DAAAM International Vienna, Austria, EU, 2012. http://hdl.handle.net/20.500.12708/66618 ( reposiTUm)

Doujak, E., Unterberger, P., & Bauer, C. (2012). Numerical Simulation of Multistage Pump-Turbine Components. In Hydroturbo 2012 (pp. 3–13). http://hdl.handle.net/20.500.12708/66594 ( reposiTUm)

Doujak, E., Unterberger, P., Weltzl, M.-M., & Bauer, C. (2012). Numerical investigation of the refeeding channel of a multistage high-head pump-turbine. In Conference Proceedings (pp. 772–779). http://hdl.handle.net/20.500.12708/66595 ( reposiTUm)

Erne, S., Lenarcic, M., Bauer, C., & Kyriacou, S. (2012). Shape optimization of a flow around circular diffuser in a turbulent incompressible flow. In Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (p. 19). TU Wien. http://hdl.handle.net/20.500.12708/66600 ( reposiTUm)

Doujak, E., Unterberger, P., & Bauer, C. (2012). Decentralized Pump Storage Systems - A New Modular Small Hydro Concept. In HydroVision 2012 (p. 14). http://hdl.handle.net/20.500.12708/66596 ( reposiTUm)

Doujak, E., Unterberger, P., Bauer, C., & Samonig, M. (2012). Development of a modular pumped turbine concept for decentralized power production. In Hidroenergia 2012 (p. 12). http://hdl.handle.net/20.500.12708/66554 ( reposiTUm)

Adjassoho, B., Kozeschnik, E., Lechner, C., Bleicher, F., Gössinger, S., & Bauer, C. (2012). Induction of residual stresses and increase of surface hardness by Machine Hammer Peening technology. In B. Katalinic (Ed.), Annals of DAAAM for 2012&Proceeding of the 23rd International DAAAM Symposium (pp. 697–702). Annals of DAAAM for 2012 & Proceeding of the 23rd International DAAAM Symposium/DAAAM International Vienna. http://hdl.handle.net/20.500.12708/66640 ( reposiTUm)

Lenarcic, M., Erne, S., & Bauer, C. (2012). Efficiency improvement by performing shape optimization of a circular flow around diffuser in a turbulent incompressible flow. In Pumped storage in the context of renewable energy supply (pp. 527–536). http://hdl.handle.net/20.500.12708/66631 ( reposiTUm)

Unterberger, P., Doujak, E., & Bauer, C. (2012). Small Hydro approach for Pump-Turbines - is a modular concept a possible solution? In Pumped storage in the context of renewable energy supply (pp. 91–103). http://hdl.handle.net/20.500.12708/66632 ( reposiTUm)

Doujak, E., Unterberger, P., & Bauer, C. (2012). Design concept of a modular multistage pump-turbine. In Innovative Approaches to Global Challenges (p. 10). http://hdl.handle.net/20.500.12708/66633 ( reposiTUm)

Kozeschnik, E., Adjassoho, B., Lechner, C., Habersohn, C., Bleicher, F., Gössinger, S., & Bauer, C. (2012). Controlled Surface Treatment With Machine Hammer Peening. In METAL 2013 (p. 6). http://hdl.handle.net/20.500.12708/66971 ( reposiTUm)

Erne, S., Edinger, G., & Bauer, C. (2011). A Porous Media Approach for the Flow Resistance of a Tube-Bundle Flow Stabilizer. In Open Source CFD International Conference (p. 11). http://hdl.handle.net/20.500.12708/66430 ( reposiTUm)

Edinger, G., Bauer, C., Gaschl, J., & Mack, R. (2010). Investigations on jet brake systems in pelton turbines. In 16. Internationales Seminar Wasserkraftanlagen (pp. 153–163). http://hdl.handle.net/20.500.12708/66196 ( reposiTUm)

Unterberger, P., Bauer, C., Gaschl, J., & Mack, R. (2010). Studies on the free jet of pelton nozzles. In 16.Internationales Seminar Wasserkraftanlagen (pp. 131–141). http://hdl.handle.net/20.500.12708/66195 ( reposiTUm)

Willinger, R., & Bauer, C. (2010). The CORDIER-Diagram for Hydraulic Turbines: A Theoretical Investigation Based on Head Curves. In 16. Internationales Seminar Wasserkraftanlagen (pp. 191–202). http://hdl.handle.net/20.500.12708/66198 ( reposiTUm)

Bauer, C., & Gössinger, S. (2015). Die Entwicklung der Kaplan-Turbine. In S. Heimerl (Ed.), Wasserkraftprojekte Band II (pp. 43–52). Springer Vieweg. http://hdl.handle.net/20.500.12708/28656 ( reposiTUm)

Unterberger, P., Doujak, E., & Bauer, C. (2015). Entwicklung kleiner Pumpturbinen - Vorteile eines modularen Ansatzes. In S. Heimerl (Ed.), Wasserkraftprojekte Band II (pp. 182–187). Springer Vieweg. http://hdl.handle.net/20.500.12708/28657 ( reposiTUm)

Doujak, E., & Bauer, C. (Eds.). (2018). Tagungsband 20. Internationales Seminar Wasserkraftanlagen. Institut für Energietechnik und Thermodynamik. http://hdl.handle.net/20.500.12708/24509 ( reposiTUm)

Doujak, E., & Bauer, C. (Eds.). (2016). Tagungsband 19. Internationales Seminar Wasserkraftanlagen. Institut f Energietechnik und Thermodynamik. http://hdl.handle.net/20.500.12708/24198 ( reposiTUm)

Doujak, E., & Bauer, C. (Eds.). (2014). Tagungsband 18. Internationales Seminar Wasserkraftanlagen. Institut f Energietechnik und Thermodynamik. http://hdl.handle.net/20.500.12708/23882 ( reposiTUm)

Doujak, E., & Bauer, C. (Eds.). (2012). Tagungsband 17. Internationales Seminar Wasserkraftanlagen. Institut f Energietechnik und Thermodynamik. http://hdl.handle.net/20.500.12708/23583 ( reposiTUm)

Hahn, F. J. J., Maly, A., & Bauer, C. (2022, November 10). NUMERICAL INVESTIGATION OF PELTON TURBINE DISTRIBUTOR SYSTEMS WITH AXIAL INFLOW [Conference Presentation]. Viennahydro - 21st International Seminar on Hydropower Plants, Laxenburg, Austria. http://hdl.handle.net/20.500.12708/154045 ( reposiTUm)

Bauer, C., & Doujak, E. (2017). Aktueller Stand zur Entwicklung einer modularen Pumpturbine im niedrigen Leistungsbereich. 11. Seminar Kleinwasserkraft, Stuttgart, Germany. http://hdl.handle.net/20.500.12708/94653 ( reposiTUm)

Bauer, C. (2015). Hydraulische Energiespeicherung im niedrigen Leistungsbereich. Renexpo Austria, Salzburg, Austria. http://hdl.handle.net/20.500.12708/94227 ( reposiTUm)

Maly, A., & Bauer, C. (2015). Einfluss der Einbautiefe auf das Kennlinienverhalten einer Pumpturbine im Turbinenbetrieb. Kolloquium Fluidenergiemaschinen 2015, Braunschweig, EU. http://hdl.handle.net/20.500.12708/94551 ( reposiTUm)

Bauer, C. (2014). The Role of Hydropower in Europe. Power-Gen Europe 2014, Köln, EU. http://hdl.handle.net/20.500.12708/94036 ( reposiTUm)

Edinger, G., & Bauer, C. (2014). Messtechnische Untersuchung an einer Modellturbine im tiefen Teillastbetrieb. Kolloquium Fluidenergiemaschinen 2014, Bochum, EU. http://hdl.handle.net/20.500.12708/93818 ( reposiTUm)

Willinger, R., & Bauer, C. (2014). Neue Erkenntnisse zum Cordier-Diagramm für Strömungsmaschinen. Kolloquium Fluidenergiemaschinen 2014, Bochum, EU. http://hdl.handle.net/20.500.12708/93819 ( reposiTUm)

Rodríguez Ripoll, M., Heindl, F., Jech, M., Lechner, C., Habersohn, C., Bleicher, F., Adjassoho, B., Kozeschnik, E., Gössinger, S., & Bauer, C. (2014). Improving the tribological properties of functional surfaces using machine hammer peening. 19th International Colloquium Tribology, Stuttgart, Ostfildern, EU. http://hdl.handle.net/20.500.12708/93972 ( reposiTUm)

Bauer, C., & Unterberger, P. (2013). Modulare Pumpturbine zur dezentralen Energiespeicherung. Science Brunch - Energie speichern: Strom und Wärme, Wien, Austria. http://hdl.handle.net/20.500.12708/93810 ( reposiTUm)

Bauer, C. (2013). Die weltweite Bedeutung der Kaplan-Turbine. 100 Jahre Kaplan-Turbine - Eine Innovation bewegt die Welt, Mürzzuschlag, Austria. http://hdl.handle.net/20.500.12708/93811 ( reposiTUm)

Adjassoho, B., Kozeschnik, E., Lechner, C., Habersohn, C., Bleicher, F., Gössinger, S., Bauer, C., Heindl, F., Rodríguez Ripoll, M., & Tomastik, C. (2013). Controlled surfaces treatment with MAchine Hammer Peening. METAL 2013, Brno, Czechia. http://hdl.handle.net/20.500.12708/93856 ( reposiTUm)

Gössinger, S., & Bauer, C. (2013). Umsetzung funktionaler Oberflächen zur Reibungsverminderung in turbulenten Strömungen durch Machine Hammer Peening. Workshop Machine Hammer Peening 2013, Wien, Austria. http://hdl.handle.net/20.500.12708/93855 ( reposiTUm)

Willinger, R., & Bauer, C. (2012). Passive Spaltströmungskontrolle im axialen Turbinengitter. Kolloquium Fluidenergiemaschinen, Karlsruhe, EU. http://hdl.handle.net/20.500.12708/93321 ( reposiTUm)

Bauer, C. (2010). Interaktion Freistrahl mit Festkörper Messung versus numerische Strömungsberechnung. Kolloquium Fluidenergiemaschinen, Karlsruhe, EU. http://hdl.handle.net/20.500.12708/93813 ( reposiTUm)

Bauer, C. (2009). Neueste Erkenntnisse zur Triebwasserentsandung durch einen Axialzyklon. Kolloquium Fluidenergiemaschinen, Karlsruhe, EU. http://hdl.handle.net/20.500.12708/93812 ( reposiTUm)

Johannsen, C., Hollenbach, U., & Bauer, C. (2008). Considerations for low noise propeller performance. 9th International Naval Engineering Conference and Exhibition, Hamburg, EU. http://hdl.handle.net/20.500.12708/92736 ( reposiTUm)

Bauer, C. (2002). High Performance CP Propeller for Low Acoustic Signatures. MECON Conference, Hamburg, EU. http://hdl.handle.net/20.500.12708/92737 ( reposiTUm)

Ruprecht, A., Bauer, C., & Heitele, M. (1999). Unsteady forces on the blading of an axial turbine caused by stator-rotor interaction. IAHR WG 1, The Behaviour of Hydraulic Machinery under Steady Conditions, Brno, EU. http://hdl.handle.net/20.500.12708/92642 ( reposiTUm)

Ruprecht, A., Bauer, C., Gentner, C., & Lein, G. (1999). Parallel Computation of Stator-Rotor Interaction in an Axial Turbine. ASME PVP Conference, Boston, Non-EU. http://hdl.handle.net/20.500.12708/92739 ( reposiTUm)

Bauer, C., Maihöfer, M., Ruprecht, A., & Lein, G. (1998). Simulation of Flow in Hydraulic Turbines Using a Multi Block Algorithm. Fourth ECCOMAS Computational Fluid Dynamics Conference, Athen, EU. http://hdl.handle.net/20.500.12708/92738 ( reposiTUm)

Bauer, C., Riedelbauch, S., & Ruprecht, A. (1994). Numerical Analysis of 3D Flow through Spiral Case, Stay Vanes and Wicket Gates. 17th Symposium of the IAHR, Beijing, Non-EU. http://hdl.handle.net/20.500.12708/92641 ( reposiTUm)

Doujak, E., Maly, A., & Bauer, C. (2015). Druck - und Schwallmessung im KW Offner (I 2015/04). http://hdl.handle.net/20.500.12708/38988 ( reposiTUm)

Gössinger, S., & Bauer, C. (2013). Zwischenbericht Arbeitsplan Hydro (No. 2). http://hdl.handle.net/20.500.12708/37688 ( reposiTUm)

Bleicher, F., Lechner, C., Habersohn, C., Gössinger, S., Bauer, C., Kozeschnik, E., Adjassoho, B., Rodríguez Ripoll, M., Heindl, F., & Jech, M. (2013). Tribological effects of structured and densified surfaces (No. 1). http://hdl.handle.net/20.500.12708/38079 ( reposiTUm)

Bauer, C. (2005). Vergleichende Untersuchung der Kavitationsmodelle verschiedener Rechenverfahren in Bezug auf die Erfassung der Spitzenwirbelkavitation. http://hdl.handle.net/20.500.12708/35504 ( reposiTUm)

Sallaberger, M., Gentner, C., & Bauer, C. (2001). Revolution in Francis Runner Design. http://hdl.handle.net/20.500.12708/35128 ( reposiTUm)

Bauer, C. (2001). Untersuchung der instationären Propellerströmung im Schiffsnachstrom. http://hdl.handle.net/20.500.12708/35505 ( reposiTUm)

Bauer, C. (2000). Simulation dreidimensionaler Wirbelstrukturen bei verstellbaren Schiffspropeller. http://hdl.handle.net/20.500.12708/35506 ( reposiTUm)

Ruprecht, A., Bauer, C., Chihab, W., Gentner, C., Ginter, F., Maihöfer, M., & Welzel, B. (1994). Einsatz der numerischen Strömungsmechanik in der Entwicklung hydraulischer Strömungsmaschinen (No. 9). http://hdl.handle.net/20.500.12708/35507 ( reposiTUm)