Schmid, S. J., Zelaya-Lainez, L., Lahayne, O., Peyerl, M., & Pichler, B. (2025). Hourly three-minute creep testing of an LC3 paste at early ages: Advanced test evaluation and the effects of the pozzolanic reaction on shrinkage, elastic stiffness, and creep. Cement and Concrete Research, 187, Article 107705. https://doi.org/10.1016/j.cemconres.2024.107705 ( reposiTUm)

Wang, X., Feng, C., Lahayne, O., Zhang, Y., Mang, H., & Pichler, B. (2024). A new cube movement test for verification of simulations of contact processes of blocks of different size in geological hazards. International Journal for Numerical and Analytical Methods in Geomechanics, 48(6), 1553–1580. https://doi.org/10.1002/nag.3695 ( reposiTUm)

Donev, V., Lahayne, O., Pichler, B., & Eberhardsteiner, L. (2023). Ultrasonic Characterisation of the Elastic Properties of Mineral Aggregates Used in Asphalt Mixtures. Road Materials and Pavement Design. https://doi.org/10.1080/14680629.2023.2188090 ( reposiTUm)

Schwaighofer, M., Zelaya-Lainez, L., Königsberger, M., Lukacevic, M., Serna-Loaiza, S., Harasek, M., Lahayne, O., Senk, V., & Füssl, J. (2023). Characterization of Mechanical Properties of Five Hot-Pressed Lignins Extracted from Different Feedstocks by Microscopy-Aided Nanoindentation. Materials & Design, 227, Article 111765. https://doi.org/10.1016/j.matdes.2023.111765 ( reposiTUm)

Zelaya Lainez, L. H., Balduzzi, G., Lahayne, O., Lukacevic, M., Hellmich, C., & Füssl, J. (2023). Micromechanics of non-embedded spruce wood: Novel polishing and indentation protocol. Materials Today: Proceedings, 93(4), 662–668. https://doi.org/10.1016/j.matpr.2023.04.678 ( reposiTUm)

Al-Musawi, H., Manni, E., Stadlmann, A., Ungerer, B., Hassan Vand, M., Lahayne, O., Nobile, R., Baumann, G., Feist, F., & Müller, U. (2023). Characterisation of Thermally Treated Beech and Birch by Means of Quasi-Static Tests and Ultrasonic Waves. Scientific Reports, 13, Article 6348. https://doi.org/10.1038/s41598-023-33054-w ( reposiTUm)

Lahayne, O., Zelaya-Lainez, L., Buchner, T., Eberhardsteiner, J., & Füssl, J. (2022). Influence of Nanoadditives on the Young’s Modulus of Cement. Materials Today: Proceedings, 62, 2488–2494. https://doi.org/10.1016/j.matpr.2022.02.626 ( reposiTUm)

Königsberger, M., Zelaya-Lainez, L., Lahayne, O., Pichler, B. L. A., & Hellmich, C. (2021). Nanoindentation-Probed Oliver-Pharr halfspaces in Alkali-Activated Slag-Fly Ash Pastes: Multimethod Identification of Microelasticity and Hardness. Mechanics of Advanced Materials and Structures, 29(26), 4878–4889. https://doi.org/10.1080/15376494.2021.1941450 ( reposiTUm)

Dohnalík, P., Pichler, B. L. A., Zelaya-Lainez, L., Lahayne, O., Richard, G., & Hellmich, C. (2021). Micromechanics of Dental Cement Paste. Journal of the Mechanical Behavior of Biomedical Materials, 124(104863), 104863. https://doi.org/10.1016/j.jmbbm.2021.104863 ( reposiTUm)

Zelaya-Lainez, L., Balduzzi, G., Lahayne, O., Ikeda, K. N., Raible, F., Herzig, C., Nischkauer, W., Limbeck, A., & Hellmich, C. (2021). Jaws of Platynereis dumerilii: Miniature Biogenic Structures with Hardness Properties Similar to Those of Crystalline Metals. JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 73(8), 2390–2402. https://doi.org/10.1007/s11837-021-04702-1 ( reposiTUm)

Polonina, E. N., Lahayne, O., Eberhardsteiner, J., Potapov, V. V., Zhdanok, S. A., & Leonovich, S. N. (2021). Nanoindentation Method for Studying the Structure of Modified Cement Stone. Journal of Engineering Physics and Thermophysics, 94(5), 1194–1207. https://doi.org/10.1007/s10891-021-02400-y ( reposiTUm)

Jagsch, V., Kuttke, P., Lahayne, O., Zelaya-Lainez, L., Scheiner, S., & Hellmich, C. (2020). Multiscale and multitechnique investigation of the elasticity of grooved rail steel. Construction and Building Materials, 238, Article 117768. https://doi.org/10.1016/j.conbuildmat.2019.117768 ( reposiTUm)

Deilmann, L., Winter, O., Cerrutti, B., Bradtmüller, H., Herzig, C., Limbeck, A., Lahayne, O., Hellmich, C., Eckert, H., & Eder, D. (2020). Effect of boron incorporation on the bioactivity, structure, and mechanical properties of ordered mesoporous bioactive glasses. Journal of Materials Chemistry B: Materials for Biology and Medicine, 8(7), 1456–1465. https://doi.org/10.1039/c9tb01805k ( reposiTUm)

Ausweger, M., Binder, E., Lahayne, O., Reihsner, R., Maier, G., Peyerl, M., & Pichler, B. (2019). Early-Age Evolution of Strength, Stiffness, and Non-Aging Creep of Concretes: Experimental Characterization and Correlation Analysis. Materials. https://doi.org/10.3390/ma12020207 ( reposiTUm)

Peretti, V., Ferraris, S., Gautier, G., Hellmich, C., Lahayne, O., Stella, B., Yamaguchi, S., & Spriano, S. (2018). Surface Treatments for Boriding of Ti6A14V Alloy in View of Applications as a Biomaterial. Tribology International, 126, 21–28. https://doi.org/10.1016/j.triboint.2018.05.006 ( reposiTUm)

Khroustalev, B. M., Leonovich, S. N., Yakovlev, G. I., Polianskich, I. S., Lahayne, O., Eberhardsteiner, J., Skripkiunas, G., Pudov, I. A., & Karpova, E. A. (2017). Structural Modification of New Formations in Cement Matrix Using Carbon Nanotube Dispersions and Nanosilica. НАУКА и ТЕХНИКА, 16(2), 93–103. https://doi.org/10.21122/2227-1031-2017-16-2-93-103 ( reposiTUm)

Bader, T. K., Dastoorian, F., Ebrahimi, G., Unger, G., Lahayne, O., Hellmich, C., & Pichler, B. (2016). Combined Ultrasonic-Mechanical Characterization of Orthotropic Elastic Properties of an Unrefíned Bagasse Fiber-Polypropylene Composite. Composites Part B: Engineering, 95, 96–104. https://doi.org/10.1016/j.compositesb.2016.03.070 ( reposiTUm)

Pichler, B., Lahayne, O., Reihsner, R., Eberhardsteiner, J., Suh, J., Kim, D., Nam, S., Paek, H., Lorenz, B., & Persson, B. N. J. (2016). Rubber friction on ice: experiments and modeling. Tribology Letters, 62, Article 17. https://doi.org/10.1007/s11249-016-0665-z ( reposiTUm)

Furin, I., Pastrama, M.-I., Kariem, H., Luczynski, K. W., Lahayne, O., & Hellmich, C. (2016). A New Nanoindentation Protocol for Identifying the Elasticity of Undamaged Extracellular Bone Tissue. MRS Advances, 1(11), 693–704. https://doi.org/10.1557/adv.2016.130 ( reposiTUm)

Karte, P., Hlobil, M., Reihsner, R., Dörner, W., Lahayne, O., Eberhardsteiner, J., & Pichler, B. (2015). Unloading-Based Stiffness Characterisation of Cement Pastes During the Second, Third and Fourth Day After Production. Strain, 51, 156–169. http://hdl.handle.net/20.500.12708/151230 ( reposiTUm)

Khroustalev, B., Eberhardsteiner, J., Lahayne, O., Leonovich, S., Yakovlev, G. I., & Pervushin, G. (2013). Nano-Tests on Concrete Samples with and without Nanotubes. НАУКА и ТЕХНИКА, 5, 35–39. http://hdl.handle.net/20.500.12708/156134 ( reposiTUm)

Hum, J., Luczynski, K., Nooeaid, P., Newby, P., Lahayne, O., Hellmich, C., & Boccaccini, A. (2013). Stiffness Improvement of 45S5 Bioglass-Based Scaffolds through PCL and Collagen Coatings: An Ultrasonic Study. Strain, 49, 434–439. http://hdl.handle.net/20.500.12708/155408 ( reposiTUm)

Malandrino, A., Fritsch, A., Lahayne, O., Kropik, K., Redl, H., Noailly, J., Lacroix, D., & Hellmich, C. (2012). Anisotropic tissue elasticity in human lumbar vertebra, by means of a coupled ultrasound-micromechanics approach. Materials Letters, 78, 154–158. https://doi.org/10.1016/j.matlet.2012.03.052 ( reposiTUm)

Luczynski, K., Dejaco, A., Lahayne, O., Jaroszewicz, J., Swieszkowski, W., & Hellmich, C. (2012). MicroCT/Micromechanics-Based Finite Element Models and Quasi-Static Unloading Tests Deliver Consistent Values for Young’s Modulus of Rapid-Prototyped Polymer-Ceramic Tissue Engineering Scaffold. Computer Modeling in Engineering & Sciences, 87(6), 505–529. https://doi.org/10.3970/cmes.2012.087.505 ( reposiTUm)

Lahayne, O., Eberhardsteiner, J., & Reihsner, R. (2009). Tribological Investigations Carried out by a Linear Friction Tester. Transactions of FAMENA, 33, 15–22. http://hdl.handle.net/20.500.12708/165710 ( reposiTUm)

Shahid, M., Schmid, S., Lahayne, O., Robisson, A., & Pichler, B. (2024). Early-age elastic and creep properties of graphene oxide cement paste determined by three-minute-long creep tests. In EMI 2024 IC: ASCE Engineering Mechanics Institute 2024 International Conference: Program & Book of Abstracts. EMI 2024 IC - ASCE Engineering Mechanics Institute 2024 International Conference, Wien, Austria. ( reposiTUm)

Schmid, S., Lahayne, O., Zelaya-Lainez, L., & Pichler, B. (2024). Creep and shrinkage of a limestone calcined clay cement paste determined in hourly performed three-minute creep tests. In EMI 2024 IC: ASCE Engineering Mechanics Institute 2024 International Conference: Program & Book of Abstracts. EMI 2024 IC - ASCE Engineering Mechanics Institute 2024 International Conference, Wien, Austria. ( reposiTUm)

Zelaya-Lainez, L., Schwaighofer, M., Königsberger, M., Lukacevic, M., Serna Loaiza, S., Zikeli, F. M., Harasek, M., Friedl, A., Lahayne, O., & Füssl, J. (2024). A Load-Controlled Nanoindentation Study on Diverse Technical Lignins for Bio-Composite Applications. In 40th Danubia-Adria Symposium on Advances in Experimental Mechanics : Book of Abstracts (pp. 154–155). ( reposiTUm)

Lahayne, O., Chapon, M., Zelaya Lainez, L. H., & Pichler, B. (2024). Ultrasonic Tests on Basalt Fiber Reinforced Polymers. In Z. Kowalewski, M. Kopec, D. Rudnik, & J. Widlaszewski (Eds.), 40th Danubia-Adria Symposium on Advances in Experimental Mechanics : Book of Abstracts (pp. 84–85). Institute of Fundamental Technological Research of the Polish Academy of Sciences. http://hdl.handle.net/20.500.12708/205037 ( reposiTUm)

Schwaighofer, M., Zelaya Lainez, L. H., Königsberger, M., Lukacevic, M., Serna Loaiza, S., Harasek, M., Friedl, A., Lahayne, O., Senk, V., & Füssl, J. (2023). Characterization of Mechanical Properties of Five Hot-Pressed Lignins Extracted from Different Feedstocks by Microscopy-Aided Nanoindentation. In Computational methods in wood mechanics : CompWood 2023, ECCOMAS Thematic Conference, September 5-8, 2023 : book of abstracts (pp. 110–111). CIMNE. ( reposiTUm)

Schwaighofer, M., Zelaya Lainez, L. H., Königsberger, M., Lukacevic, M., Serna Loaiza, S., Harasek, M., Friedl, A., Lahayne, O., Senk, V., & Füssl, J. (2023). Characterization of Mechanical Properties of Five Hot-Pressed Lignins Extracted from Different Feedstocks by Microscopy-Aided Nanoindentation. In 39th Danubia-Adria Symposium on Advances in Experimental Mechanics (39th DAS) (pp. 104–105). ( reposiTUm)

Schmid, S., Zelaya Lainez, L. H., Lahayne, O., Peyerl, M., & Pichler, B. L. A. (2023). Hourly-Repeated Three-Minutes Creep Testing of a Limestone Calcined Clay Cement Paste (LC3). In A. Jędrzejewska, F. Kanavaris, M. Azenha, F. Benboudjema, & D. Schlicke (Eds.), International RILEM Conference on Synergising Expertise towards Sustainability and Robustness of Cement-based Materials and Concrete Structures (pp. 291–299). Springer. https://doi.org/10.1007/978-3-031-33187-9_28 ( reposiTUm)

Schwaighofer, M., Zelaya Lainez, L. H., Königsberger, M., Lukacevic, M., Serna Loaiza, S., Harasek, M., Lahayne, O., Senk, V., Zikeli, F. M., Friedl, A., & Füssl, J. (2023). Micromechanics-Guided Nanoindentation of Five Hot-Pressed Lignins Extracted From Different Feedstocks. In Oral Presentations 21st ISWFPC International Symposium on Wood, Fiber and Pulp Chemistry (pp. 165–168). ( reposiTUm)

Schwaighofer, M., Zelaya Lainez, L. H., Königsberger, M., Lukacevic, M., Serna Loaiza, S., Lahayne, O., Senk, V., & Füssl, J. (2022). Characterization of Elastic Properties from Technical Lignins by Light Microscopy Aided Nanoindentation. In Book of Abstracts of the 38th Danubia-Adria Symposium on Advances in Experimental Mechanics. 38th Danubia-Adria Symposium on Advances in Experimental Mechanics, Poros, Greece. http://hdl.handle.net/20.500.12708/95688 ( reposiTUm)

Dohnalik, P., Pichler, B., Zelaya-Lainez, L., Lahayne, O., & Hellmich, C. (2022). Experimental and computational micromechanics of dental cement paste. In Computational Modelling of Concrete and Concrete Structures (pp. 96–101). CRC Press. https://doi.org/10.1201/9781003316404-11 ( reposiTUm)

Zelaya Lainez, L. H., Königsberger, M., Lahayne, O., Pichler, B., & Hellmich, C. (2022). Microstructural and Micromechanical Characterization of Alkali-Activated Slag-Fly Ash Systems. In Book of Abstracts of the 19th International Conference on Experimental Mechanics (pp. 220–221). http://hdl.handle.net/20.500.12708/95684 ( reposiTUm)

Zelaya Lainez, L. H., Balduzzi, G., Lahayne, O., Hellmich, C., Lukacevic, M., & Füssl, J. (2022). Micromechanics of Nonembedded Spruce Wood: Novel Polishing and Indentation Protocol. In Book of Abstracts of the 38th Danubia-Adria Symposium on Advances in Experimental Mechanics. 38th Danubia-Adria Symposium on Advances in Experimental Mechanics, Poros, Greece. http://hdl.handle.net/20.500.12708/95689 ( reposiTUm)

Zelaya-Lainez, L., Balduzzi, G., Lahayne, O., Ikeda, N. K., Raible, F., Herzig, C., Nischkauer, W., Limbeck, A., & Hellmich, C. (2021). Jaws of Platynereis dumerilii: Miniature Biogenic 3D Printed Structures with Hardness Properties Similar to Those of Crystalline Metals. In Book of Abstracts of the 37th Danubia Adria Symposium on Advances in Experimental Mechanics (pp. 146–147). Johannes Kepler University. http://hdl.handle.net/20.500.12708/62991 ( reposiTUm)

Lahayne, O., Zelaya-Lainez, L., Buchner, T., & Eberhardsteiner, J. (2021). Influence of Nano-Additives on the Elasticity of Cement. In Book of Abstracts of the 37th Danubia Adria Symposium on Advances in Experimental Mechanics (pp. 16–17). Johannes Kepler University. http://hdl.handle.net/20.500.12708/62992 ( reposiTUm)

Dohnalik, P., Pichler, B., Zelaya-Lainez, L., Lahayne, O., Richard, G., & Hellmich, C. (2021). Characterization of Dental Cement Paste: Grid Nanoindentastion and Ultrasound. In Book of Abstracts of the 37th Danubia Adria Symposium on Advances in Experimental Mechanics (pp. 167–168). Johannes Kepler University. http://hdl.handle.net/20.500.12708/62994 ( reposiTUm)

Dohnalik, P., Lahayne, O., Zelaya-Lainez, L., Pichler, B., & Hellmich, C. (2021). Grid Nanoindentation of Mature Dental Cement Paste. In Programme & Book of Abstracts of the ERICA CASH II Final Conference (pp. 105–106). TU Wien, Institute for Mechanics of Materials and Structures. http://hdl.handle.net/20.500.12708/62995 ( reposiTUm)

Königsberger, M., Göbel, L., Zelaya-Lainez, L., Lahayne, O., Pichler, B., & Hellmich, C. (2021). Nanoindentation-Based Multiscale Micromechanics Model for Alkali-Activated Slag-Fly Ash Mixes. In Programme & Book of Abstracts of the ERICA CASH II Final Conference (pp. 111–112). TU Wien, Institute for Mechanics of Materials and Structures. http://hdl.handle.net/20.500.12708/62998 ( reposiTUm)

Dohnalik, P., Lahayne, O., Pichler, B., & Hellmich, C. (2021). Grid Nanoindentation and Ultrasonic Characterization of Dental Cement Paste. In Technical Program and Abstracts of EMI 2021 / PMC 2021. American Society of Civil Engineers (ASCE). http://hdl.handle.net/20.500.12708/63003 ( reposiTUm)

Polonina, E., Lahayne, O., Eberhardsteiner, J., & Leonovich, S. (2020). Nanoindentation of cement stone samples. In E3S Web of Conferences (p. 02013). EDP Sciences. https://doi.org/10.1051/e3sconf/202021202013 ( reposiTUm)

Dohnalik, P., Lahayne, O., Hellmich, C., & Pichler, B. (2019). Stiffness and Strength of Mature Dental Cement Paste. In J. Zhang & B. Pichler (Eds.), Programme & Proceedings of the China-Austria Forum for Postgraduates of Civil Engineering (pp. 69–71). Vienna University of Technology. http://hdl.handle.net/20.500.12708/62772 ( reposiTUm)

Binder, E., Reihsner, R., Lahayne, O., Eberhardsteiner, J., & Pichler, B. (2019). Adaptation of a Cruciform Testing Machine Zwick/Roell Z050 for Biaxial Compression Creep Experiments. In Book of Extended Abstracts of the 36th Danubia Adria Symposium on Advances in Experimental Mechanics (pp. 109–110). University of West Bohemia. http://hdl.handle.net/20.500.12708/62744 ( reposiTUm)

Zelaya-Lainez, L., Lahayne, O., Balduzzi, G., & Hellmich, C. (2019). Micromechanics of Non-Embedded Spruce Wood: Novel Polishing and Indentation Protocol. In Book of Extended Abstracts of the 36th Danubia Adria Symposium on Advances in Experimental Mechanics (pp. 157–158). University of West Bohemia. http://hdl.handle.net/20.500.12708/62745 ( reposiTUm)

Jagsch, V., Hasslinger, P., Lahayne, O., Hellmich, C., & Scheiner, S. (2018). Stiffness Determination in Steel Specimens Originating from New and Discarded Tramway Rails by Means of Nanoindentation. In Book of Abstracts of the 35th Danubia Adria Symposium on Advances in Experimental Mechanics (pp. 27–28). Editura Printech. http://hdl.handle.net/20.500.12708/62504 ( reposiTUm)

Eberhardsteiner, J., Schmid, S., Lahayne, O., Reihsner, R., & Pichler, B. (2018). Micro-and Macroscopic Characterization of Granite. In Proceedings of the 35th Danubia-Adria Symposium on Advances in Experimental Mechanics (pp. 61–62). Editura Printech. http://hdl.handle.net/20.500.12708/62582 ( reposiTUm)

Binder, E., Maier, G., Lahayne, O., Reihsner, R., Ausweger, M., Peyerl, M., & Pichler, B. (2017). Do Modern Concretes Exhibit Similar Early-Age Stiffness and Strength Developments as their Predecessors? In Proceedings of the 34th Danubia-Adria Symposium on Advances in Experimental Mechanics (p. 2). University of Trieste. http://hdl.handle.net/20.500.12708/62234 ( reposiTUm)

Yakovlev, G. I., Skripkiunas, G., Polianskich, I. S., Lahayne, O., Eberhardsteiner, J., Urkhanova, L. A., Pudov, I. A., Sychogov, S. V., Karpova, E. A., & Sen´Kov, S. A. (2017). Modification of Cement Matrix Using Carbon Naotube Dispersions and Nanosilica. In A. Juozapaitis, A. Daniūnas, & E. K. Zavadskas (Eds.), Modern Building Materials, Structures and Techniques (pp. 1261–1269). Elsevier BV. https://doi.org/10.1016/j.proeng.2017.02.148 ( reposiTUm)

Eberhardsteiner, J., & Lahayne, O. (2014). Nano-Tests on Concrete Samples with and without Nanotubes. In Proceedings of the VI International Conference on Nanotechnologies in Construction (pp. 21–24). Publishing LLC RIF “MATERIALS.” http://hdl.handle.net/20.500.12708/61304 ( reposiTUm)

Lahayne, O., Eberhardsteiner, J., G., Y., Leonovich, S., & Pervushin, G. (2013). Nano-Tests on Concrete Samples with and without Nanotubes. In Proceedings of the International Conference on Fracture Mechanics of Concrete, Reinforced Concrete and other Building Materials (pp. 3–13). Russian Academy of Architecture and Building Sciences. http://hdl.handle.net/20.500.12708/61181 ( reposiTUm)

Hum, J., Luczynski, K., Nooeaid, P., Newby, P., Lahayne, O., Hellmich, C., & Boccaccini, A. (2013). Stiffness Improvement of 45S5 Bioglass-Based Scaffolds through PCL and Collagen Coatings: An Ultrasonic Study. In Proceedings of the 30th Danubia-Adria-Symposium (DAS 30) (pp. 93–94). Croatian Society of Mechanics. http://hdl.handle.net/20.500.12708/61113 ( reposiTUm)

Luczynski, K., Dejaco, A., Lahayne, O., Jaroszewicz, J., Swieszkowski, W., & Hellmich, C. (2012). MicroCT/Micromechanics-Based Finite Element Models and Quasi-Static Unloading Tests Deliver Consistent Values for Youngs’s Modulus of Rapid-Prototyped Polymer-Ceramic Tissue Engineering Scaffold. In Book of Abstracts - 5th Vienna Biomaterialsymposium. TU Wien. http://hdl.handle.net/20.500.12708/60906 ( reposiTUm)

Luczynski, K., Dejaco, A., Lahayne, O., Jaroszewicz, J., Swieszkowski, W., & Hellmich, C. (2012). Micro-CT/Micromechanics-Based Finite Element Models and Quasi-Static Unloading Tests Deliver Consistent Values for Young’s Modulus of Rapid-Prototyped Polymer-Ceramic Tissue Engineering Scaffold. In Proceedings of the 29th Danubia-Adria-Symposium (DAS 29) (pp. 2–3). University of Belgrade. http://hdl.handle.net/20.500.12708/60867 ( reposiTUm)

Luczynski, K., Dejaco, A., Lahayne, O., Jaroszewicz, J., Swieszkowski, W., & Hellmich, C. (2012). Micro-CT/Micromechanics-Based Finite Element Models and Quasi-Static Unloading Tests Deliver Consistent Values for Young’s Modulus of Rapid-Prototyped Polymer-Ceramic Tissue Engineering Scaffold. In Book of Abstracts of 2nd Joint Meeting of COST Action MP1005, From Nano to Macro Biomaterials and Applications to Stem Cells Regeneration Orthopedic and Dental Medicine (NAMABIO) (pp. 53–54). Institute for Strength of Materials, Vienna University of Technology. http://hdl.handle.net/20.500.12708/60930 ( reposiTUm)

Lahayne, O., Eberhardsteiner, J., & Reihsner, R. (2008). Tribological Investigations Using a Linear Friction Tester. In Proceedings of the 25th Danubia-Adria Symposium on Developments in Experimental Mechanics (pp. 141–142). Powerprint. http://hdl.handle.net/20.500.12708/59718 ( reposiTUm)

Lahayne, O., & Eberhardsteiner, J. (2007). Investigation of the Temperature Behaviour of Sliding Rubber Materials. In Computer Methods and Experimental Measurements for Surface Effects and Contact Mechanics VIII (pp. 155–164). WIT Press. http://hdl.handle.net/20.500.12708/59542 ( reposiTUm)

Schmid, S., Zelaya Lainez, L. H., Lahayne, O., Peyerl Martin, & Pichler, B. (2025, July 7). Evaluation of Ultrashort Creep Tests on Hydrating Cementitious Materials Requires an Evaluation Protocol Accounting for Creep During Load [Conference Presentation]. 21st International Conference on Experimental Mechanics (ICEM21), Bologna, Italy. http://hdl.handle.net/20.500.12708/217222 ( reposiTUm)

Schmid, S., Zelaya Lainez, L. H., Lahayne, O., Peyerl Martin, & Pichler, B. (2025, May). The effects of the pozzolanic reaction on shrinkage, elastic stiffness, and creep of a limestone calcined-clay cement paste [Conference Presentation]. Engineering Mechanics Institute Conference 2025 (EMI 2025), Anaheim, United States of America (the). http://hdl.handle.net/20.500.12708/217221 ( reposiTUm)

Zelaya-Lainez, L. H., Schindler, J., Königsberger, M., Thirion, A., Hofegger, J., Pech, S., Mariani, A., Nuvoli, D., Balduzzi, G., Lahayne, O., Lukacevic, M., Hellmich, C., & Füssl, J. (2025, May). Novel Nanoindentation Protocol for Non-Embedded Spruce Wood and Analysis of Polymer Modified Birch [Conference Presentation]. Engineering Mechanics Institute 2025 Conference (EMI 2025), United States of America (the). ( reposiTUm)

Schmid, S., Zelaya Lainez, L. H., Lahayne, O., Peyerl Martin, & Pichler, B. (2025, September). Relationships between microstructure and macroscopic mechanical properties of binary/ternary OPC/limestone/calcined clay cement pastes [Conference Presentation]. ECCOMAS 8th Young Investigators Conference (YIC 2025), Pescara, Italy. http://hdl.handle.net/20.500.12708/220508 ( reposiTUm)

Zelaya-Lainez, L. H., Schwaighofer, M., Königsberger, M., Lukacevic, M., Lahayne, O., Serna Loaiza, S., Hofbauer, C., Scolari, L., Unsinn, G., Wahab, N., Ibadov, R., Zikeli Florian, Harasek, M., Friedl, A., & Füssl, J. (2024, September 26). Characterization of mechanical properties of five hot-pressed lignins extracted from different feedstocks by load-controlled nanoindentation [Poster Presentation]. 40th Danubia-Adria Symposium on Advances in Experimental Mechanics, Poland. http://hdl.handle.net/20.500.12708/210963 ( reposiTUm)

Schwaighofer, M., Zelaya Lainez, L. H., Königsberger, M., Lukacevic, M., Serna Loaiza, S., Harasek, M., Zikeli, F. M., Friedl, A., Lahayne, O., Senk, V., & Füssl, J. (2023, November 10). Characterization of Mechanical Properties of Five Hot-Pressed Lignins Extracted from Different Feedstocks by Micromechanics-Guided Nanoindentation [Presentation]. Early Career Scientist Training Workshop on “Building Materials and Engineering Structures,” Wien, Austria. ( reposiTUm)

Schmid, S., Zelaya Lainez, L. H., Lahayne, O., Peyerl, M., & Pichler, B. (2023, June 7). Viscoelastic Properties of LC3-Paste: Ultrasound Pulse Transmission and Hourly Repeated Minute-Long Creep Testing [Conference Presentation]. Engineering Mechanics Institute Conference, Atlanta, Georgia, United States of America (the). http://hdl.handle.net/20.500.12708/188847 ( reposiTUm)

Zelaya Lainez, L. H., Schwaighofer, M., Königsberger, M., Lukacevic, M., Lahayne, O., Harter, T., Serna Loaiza, S., Hofbauer, C., Zikeli, F. M., Harasek, M., Friedl, A., Scolari, L., Grothe, H., & Füssl, J. (2023, September). Characterization of mechanical properties of five hot-pressed lignins extracted from different feedstocks by load-controlled nanoindentation [Poster Presentation]. 39th Danubia-Adria Symposium on Advances in Experimental Mechanics 2023, Siofok, Hungary. ( reposiTUm)

Zelaya Lainez, L. H., Königsberger, M., Lahayne, O., Pichler, B., & Hellmich, C. (2022, July 21). Microstructural and Micromechanical Characterization of Alkali-Activated Slag-Fly Ash Systems [Conference Presentation]. 19th International Conference on Experimental Mechanics (ICEM2022), Poland. ( reposiTUm)

Schwaighofer, M., Zelaya Lainez, L. H., Königsberger, M., Lukacevic, M., Serna Loaiza, S., Harasek, M., Lahayne, O., Senk, V., & Füssl, J. (2022, September 0). Characterization of Elastic Properties from Technical Lignins by Light Microscopy Aided Nanoindentation [Poster Presentation]. 38th Danubia-Adria Symposium on Advances in Experimental Mechanics, Greece. ( reposiTUm)

Lahayne, O., Zelaya-Lainez, L., Buchner, T., & Eberhardsteiner, J. (2021). Influence of Nano-Additives on the Elasticity of Cement. 37th Danubia-Adria Symposium on Advances in Experimental Mechanics, Johannes Kepler University, Linz,, Austria. http://hdl.handle.net/20.500.12708/115569 ( reposiTUm)

Zelaya-Lainez, L., Balduzzi, G., Lahayne, O., Ikeda, N. K., Raible, F., Herzig, C., Nischkauer, W., Limbeck, A., & Hellmich, C. (2021). Jaws of Platynereis dumerilii: Biologically 3D Printed Miniature Biogenic Structures with Hardness Properties Similar to Those of Crystalline Metals. 37th Danubia-Adria Symposium on Advances in Experimental Mechanics, Johannes Kepler University, Linz,, Austria. http://hdl.handle.net/20.500.12708/115570 ( reposiTUm)

Dohnalik, P., Pichler, B., Zelaya-Lainez, L., Lahayne, O., & Richard, G. (2021). Characterization of Dental Cement Paste: Grid Nanoindentation and Ultrasound. 37th Danubia-Adria Symposium on Advances in Experimental Mechanics, Johannes Kepler University, Linz,, Austria. http://hdl.handle.net/20.500.12708/115574 ( reposiTUm)

Zelaya-Lainez, L., Balduzzi, G., Lahayne, O., & Hellmich, C. (2019). Micromechanics of Non-Embedded Spruce Wood: Novel Polishing and Indentation Protocol. 36th Danubia-Adria Symposium on Advanced in Experimental Mechanics, Plzen, Czechia. http://hdl.handle.net/20.500.12708/115123 ( reposiTUm)

Winter, O., Melchers, S., Uesebeck, T., Lahayne, O., Hellmich, C., Eckert, H., & Eder, D. (2017). Effect of Aluminium and Boron Incorporation on Structure, Bioactivity and Mechanical Properties of Ordered Mesoporous Bioactive Glasses. 3rd Edition Smart Materials and Surfaces - SMS - Conference and Exhibition (SMS Europe 2017), Paris, France. http://hdl.handle.net/20.500.12708/100447 ( reposiTUm)

Lahayne, O. (2013). Nano-Tests on Concrete Samples with and without Nanotubes. International Scientific Conference and the Meeting of the Scientific Council Department of Building Sciences - Russian Academy of Architecture and Building Sciences, Voronezh, Russian Federation (the). http://hdl.handle.net/20.500.12708/112794 ( reposiTUm)

Lahayne, O., Eberhardsteiner, J., & Reihsner, R. (2008). Tribological Investigations Using a Linear Friction Tester (LFT). 25th Danubia-Adria Symposium on Advances in Experimental Mechanics, Budweis, Czech Republic, EU. http://hdl.handle.net/20.500.12708/111651 ( reposiTUm)

Lahayne, O. (2007). Investigation of the Temperature Behaviour of Sliding Rubber Materials. Eighth International Conference on Computer Methods and Experimental Measurements for Surface Effects and Contact Mechanics, Ashurst, Southampton, United Kingdom, EU. http://hdl.handle.net/20.500.12708/110651 ( reposiTUm)

Lahayne, O. (2004). The Experimental Investigation of Frictional Behaviour of Rubber Materials. 12th International Conference on Experimental Mechanics (ICEM12), Bari, Italy, Austria. http://hdl.handle.net/20.500.12708/109530 ( reposiTUm)

Eberhardsteiner, J., Fidi, W., & Lahayne, O. (1998). Experimental Investigation of Adhesive Friction Properties of Rubber on Wet Surfaces. 15th Danubia-Adria Symposium on Experimental Methods in Solid Mechanics, Bertinoro, Italy, Austria. http://hdl.handle.net/20.500.12708/108799 ( reposiTUm)

Lahayne, O., Reihsner, R., Pichler, B., & Eberhardsteiner, J. (2014). Technology Research for Winter Performance Improvement - Activities 2013/2014: From LFT-Testing for Creation of a Comprehensive Friction Coefficient Database, via Roughness Characterisation of Different Ice Surfaces, to the Development of a Generalised Friction Law. http://hdl.handle.net/20.500.12708/38094 ( reposiTUm)

Lahayne, O., Pichler, B., & Eberhardsteiner, J. (2013). Technology Research for Winter Performance Improvement - Activities 2012: Preparation of Snow Surfaces for Indoor Friction Test, Representative for Field Experiments with Tires. http://hdl.handle.net/20.500.12708/38093 ( reposiTUm)

Luczynski, K., Hellmich, C., Lahayne, O., Reihsner, R., Swieszkowski, W., Jaroszewicz, J., Brynk, T., & Ostrowska, B. (2011). Mechanical Characterization of Ceramic-Polymer-Based/Rapid-prototyped Biomaterials, Produced by WUT. http://hdl.handle.net/20.500.12708/36934 ( reposiTUm)

Hellmich, C., Fritsch, A., Lahayne, O., Dejaco, A., Pöll, M., Rustichelli, F., Dyson, J., Calbucci, V., Albertini, G., Kober, C., Szwieszkowski, W., Jaroszewicz, J., Brynk, T., Young, P., Hostens, J., Salmon, P., Bongaers, E., Müller, Ch., Volf, A., & Komlev, V. (2011). Midterm Report, including Risk Assessment Reports, Deliverable Report. http://hdl.handle.net/20.500.12708/37059 ( reposiTUm)

Hellmich, C., Fritsch, A., Lahayne, O., Dejaco, A., Pöll, M., Rustichelli, F., Dyson, J., Calbucci, V., Albertini, G., Kober, C., Swieszkowski, W., Jaroszewicz, J., Young, P., Hostens, J., Salmons, P., Müller, C., & Komlev, V. (2010). Midterm Report. http://hdl.handle.net/20.500.12708/36606 ( reposiTUm)

Hellmich, C., Fritsch, A., Lahayne, O., Dejaco, A., Pöll, M., Dyson, J., Calbucci, V., Albertini, G., Kober, C., Swieszkowski, W., Jaroszewicz, J., Young, P., Hostens, J., Salmons, P., Müller, C., & Komlev, V. (2010). Full Risk Analysis of BIO-CT-EXPLOIT Project Based on Crucial Checking Points. http://hdl.handle.net/20.500.12708/36216 ( reposiTUm)

Lahayne, O. (2007). Experimentelle Reibungsuntersuchungen und Modellrechnungen zum Verhalten von Reifenmaterialien [Dissertation, Technische Universität Wien]. reposiTUm. http://hdl.handle.net/20.500.12708/181995 ( reposiTUm)