Wissenschaftliche Artikel

Hojati, M., Gierl-Mayer, C., & Danninger, H. (2026). Effect of admixed alloying components on the properties of sintered steels based on Cr prealloyed powder. Powder Metallurgy, 69(2), 150–162. https://doi.org/10.1177/00325899251398417 ( reposiTUm)

Holzer, A., Pfeifenberger, S., Harakály, G., & Gierl-Mayer, C. (2026). Influence of the feedstock-viscosity on photolithography-based metal manufacturing – predict printability threshold. European Journal of Materials, 6(1), Article 2611574. https://doi.org/10.1080/26889277.2025.2611574 ( reposiTUm)

Danninger, H., De Oro Calderon, R., Gierl-Mayer, C., & Strobl, S. (2025). Alloying variants – A special feature of powder metallurgy. Powder Metallurgy, 68(4), 352–362. https://doi.org/10.1177/00325899251347075 ( reposiTUm)

De Oro Calderon, R., Hojati, M., Dvrak, A., Geroldinger, S., Danninger, H., Gierl-Mayer, C., & Hellein, R. (2025). Sustainable Hybrid Alloyed PM Steels. 粉体および粉末冶金 = Funtai Oyobi Funmatsuyakin = Journal of the Japan Society of Powder and Powder Metallurgy, 72, 1351–1358. https://doi.org/10.2497/jjspm.16F-T12-09 ( reposiTUm)

Geroldinger, S., Hojati, M., De Oro Calderon, R., Gierl-Mayer, C., Danninger, H., & Hellein, R. (2024). Hybrid Alloyed Sinter Hardening Steels Based on Different Prealloyed Powders. HTM - Journal of Heat Treatment and Materials, 79(3), 147–158. https://doi.org/10.1515/htm-2024-0011 ( reposiTUm)

Hojati, M., Gierl-Mayer, C., & Danninger, H. (2024). Impact Fracture Behaviour of Powder Metallurgy Steels Sintered at Different Temperatures. BHM Berg- Und Hüttenmännische Monatshefte, 169(3), 132–139. https://doi.org/10.1007/s00501-024-01428-w ( reposiTUm)

Hojati, M., Gierl-Mayer, C., & Danninger, H. (2023). Mechanical properties of sinter hardened sintered steels prepared by hybrid alloying. European Journal of Materials, 3(1), Article 2202714. https://doi.org/10.1080/26889277.2023.2202714 ( reposiTUm)

de Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2023). Microstructural evolution during sintering of Fe-Cr-C steels prepared from admixed elemental powders. Powder Metallurgy, 66(5), 450–460. https://doi.org/10.1080/00325899.2023.2201487 ( reposiTUm)

Geroldinger, S., Teissedre, L., de Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2023). Hardenability of PM steel alloyed using tailored master alloys. HTM - Journal of Heat Treatment and Materials, 78(6), 341–351. https://doi.org/10.1515/htm-2023-0028 ( reposiTUm)

Auinger, M., Büchler, M., Schöneich, H.-G., Gierl-Mayer, C., & Danninger, H. (2023). Hydrogen accumulation and diffusion in cylindrical-shaped pipeline steels with coating defects. International Journal of Hydrogen Energy, 48(88), 34454–34462. https://doi.org/10.1016/j.ijhydene.2023.05.181 ( reposiTUm)

Mitterlehner, M., Danninger, H., Gierl-Mayer, C., Frank, J., Tomischko, W., & Gschiel, H. (2022). Novel testing device and routine to characterise the spreadability of powders for powder bed fusion processes – a problem-oriented approach. Powder Metallurgy, 65(4), 318–334. https://doi.org/10.1080/00325899.2021.2023414 ( reposiTUm)

Hojati, M., Danninger, H., & Gierl-Mayer, C. (2022). Mechanical and Physical Properties of Differently Alloyed Sintered Steels as a Function of the Sintering Temperature. Metals, 12(1), 13. https://doi.org/10.3390/met12010013 ( reposiTUm)

De Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2022). Thermoanalytical techniques for characterizing sintering processes in ferrous powder metallurgy. Journal of Thermal Analysis and Calorimetry. https://doi.org/10.1007/s10973-022-11740-7 ( reposiTUm)

Geroldinger, S., de Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2021). Tailored liquid phases for enhanced sintering of advanced PM-steels. Materials Science Forum, 1016, 470–475. http://hdl.handle.net/20.500.12708/137217 ( reposiTUm)

Hojati, M., Gierl-Mayer, C., & Danninger, H. (2021). Iron-carbon masteralloy as sintering activator for low alloy powder metallurgy steels. Materials Science Forum, 1016, 561–567. http://hdl.handle.net/20.500.12708/137218 ( reposiTUm)

Danninger, H., Gierl-Mayer, C., Prokofyev, M., Huemer, M.-C., de Oro Calderon, R., Hellein, R., Müller, A., & Stetina, G. (2021). Manganese - a promising element also in high alloy sintered steels. Powder Metallurgy, 64(2), 115–125. https://doi.org/10.1080/00325899.2021.1886717 ( reposiTUm)

Geroldinger, S., De Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2021). Sinter Hardening PM Steels Prepared through Hybrid Alloying. HTM - Journal of Heat Treatment and Materials, 76(2), 105–119. https://doi.org/10.1515/htm-2020-0007 ( reposiTUm)

Mitterlehner, M., Danninger, H., Gierl-Mayer, C., & Gschiel, H. (2021). Investigation of the influence of powder moisture on the spreadability using the spreading tester. BHM Berg- Und Hüttenmännische Monatshefte, 166(1), 14–22. https://doi.org/10.1007/s00501-020-01067-x ( reposiTUm)

Höfler, T., Linder, B., Angeli, G., Gierl-Mayer, C., Danninger, H., & Auinger, M. (2021). Internal oxidation and formation of Si/Al-enriched oxide bands in the scale of electrical steel grades. Corrosion Science, 187(109502), 109502. https://doi.org/10.1016/j.corsci.2021.109502 ( reposiTUm)

Danninger, H., de Oro Calderon, R., Geroldinger, S., Gierl-Mayer, C., & Dunkley, J. J. (2021). The masteralloy concept for sintered steels - new impetus for a classical approach. Advanced Engineering Forum, 42, 9–16. https://doi.org/10.4028/www.scientific.net/aef.42.9 ( reposiTUm)

Geroldinger, S., de Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2021). Applying the masteralloy concept for manufacturing of sinter hardening PM steel grades. Advanced Engineering Forum, 42, 17–23. https://doi.org/10.4028/www.scientific.net/aef.42.17 ( reposiTUm)

Danninger, H., de Oro Calderon, R., Geroldinger, S., & Gierl-Mayer, C. (2021). Heat treatment of sintered steels - advances in alloying techniques and systems. International Journal of Powder Metallurgy, 57(2), 49–58. http://hdl.handle.net/20.500.12708/137609 ( reposiTUm)

Geroldinger, S., de Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2021). Transient liquid phase sintering of PM steel - a matter of the heating rate. Metals, 11(10), 1662. https://doi.org/10.3390/met11101662 ( reposiTUm)

Ouda, K., Danninger, H., Gierl-Mayer, C., Hellein, R., & Müller, A. (2021). Ferrothermal reduction of iron(III)phosphate insulating layers in soft magnetic composites. Powder Metallurgy, 64(5), 351–359. https://doi.org/10.1080/00325899.2021.1909211 ( reposiTUm)

Mikl, G., Höfler, T., Gierl-Mayer, C., Danninger, H., Linder, B., & Angeli, G. (2021). Scaling Behaviour of Si-alloyed Steel Slabs under Reheating Conditions. Journal of Casting & Materials Engineering, 5(4), 71–74. https://doi.org/10.7494/jcme.2021.5.4.71 ( reposiTUm)

Eder, F., Weil, M., Schubert, W.-D., & Gierl-Mayer, C. (2021). Ammonium metatungstate, (NH4)6[H2W12O40] - crystallization and thermal behavior of various hydrous species. Crystal Growth and Design, 21(11), 6195–6212. https://doi.org/10.1021/acs.cgd.1c00639 ( reposiTUm)

Mitterlehner, M., Danninger, H., Gierl-Mayer, C., Gschiel, H., & Hatzenbichler, M. (2021). Processability of moist superalloy powder by SLM. BHM Berg- Und Hüttenmännische Monatshefte, 166(1), 23–32. https://doi.org/10.1007/s00501-020-01065-z ( reposiTUm)

Drechsel, C., Peterlik, H., Gierl-Mayer, C., Stöger-Pollach, M., & Konegger, T. (2021). Influence of DVB as linker molecule on the micropore formation in polymer-derived SiCN ceramics. Journal of the European Ceramic Society, 41(6), 3292–3302. https://doi.org/10.1016/j.jeurceramsoc.2021.01.051 ( reposiTUm)

Mitterlehner, M., Danninger, H., Gierl-Mayer, C., Gschiel, H., Martinez, C., Tomisser, M., Schatz, M., Senck, S., Auer, J., & Benigni, C. (2021). Comparative Evaluation of Characterization Methods for Powders Used in Additive Manufacturing. Journal of Materials Engineering and Performance, 30(9), 7019–7034. https://doi.org/10.1007/s11665-021-06113-4 ( reposiTUm)

Kalss, G., Gierl-Mayer, C., Danninger, H., & Stetina, G. (2020). Sinter hardening of Cr-Mo pre-alloyed steels as a function of the carbon content. Powder Metallurgy Progress, 20(2), 81–93. https://doi.org/10.2478/pmp-2020-0008 ( reposiTUm)

Konegger, T., Gierl-Mayer, C., Sikora, A., Rojacz, H., Fafilek, G., Danninger, H., & Adam, K. (2020). Powder metallurgy manufacturing of iron aluminides with different aluminium contents and magnesium addition by reactive hot pressing. Powder Metallurgy Progress, 20(1), 41–55. https://doi.org/10.2478/pmp-2020-0005 ( reposiTUm)

Mitterlehner, M., Danninger, H., Gierl-Mayer, C., Frank, J., & Tomischko, W. (2020). Study on The Inﬂuence of the Blade on Powder Layers Built in Powder Bed Fusion Processes for Additive Manufacturing. BHM Berg- Und Hüttenmännische Monatshefte, 165(3), 157–163. https://doi.org/10.1007/s00501-020-00955-6 ( reposiTUm)

Gierl-Mayer, C. (2020). Reactions between ferrous powder compacts and atmospheres during sintering - an overview. Powder Metallurgy, 63(4), 237–253. https://doi.org/10.1080/00325899.2020.1810427 ( reposiTUm)

Gierl-Mayer, C., De Oro Calderon, R., & Danninger, H. (2019). Die Masteralloy-Route als attraktive Legierungsvariante für sinterhärtende Stähle. BHM Berg- und Hüttenmännische Monatshefte. https://doi.org/10.1007/s00501-019-0885-2 ( reposiTUm)

Gierl-Mayer, C., De Oro Calderon, R., & Danninger, H. (2019). Sintering of ferrous metallic compacts: Chemical reactions that involve interstitial elements. Journal of the American Ceramic Society, 102(2), 695–705. https://doi.org/10.1111/jace.16039 ( reposiTUm)

Danninger, H., de Oro Calderon, R., & Gierl-Mayer, C. (2019). Alloy systems for heat treated sintered steels / Legierungssysteme für die Wärmebehandlung von Sinterstählen. HTM - Journal of Heat Treatment and Materials, 74(5), 282–292. https://doi.org/10.3139/105.110394 ( reposiTUm)

Gierl-Mayer, C., Huemer, M.-C., Danninger, H., Dlapka, M., Stetina, G., & Ratzi, R. (2019). Supersolidus sintering of Cr prealloyed steels by inductive heating. Powder Metallurgy Progress, 19(2), 53–62. https://doi.org/10.1515/pmp-2019-0006 ( reposiTUm)

Gierl-Mayer, C., Stepan, T., Sun, J., & Danninger, H. (2019). Study on sintering of artificially oxidized steel compacts. Powder Metallurgy Progress, 19(1), 12–22. https://doi.org/10.1515/pmp-2019-0002 ( reposiTUm)

Ecker, J. V., Dobrezberger, K., Gonzalez-Gutierrez, J., Spoerk, M., Gierl-Mayer, C., & Danninger, H. (2019). Additive manufacturing of steel and copper using fused layer modelling: Material and process development. Powder Metallurgy Progress, 19(2), 63–81. https://doi.org/10.1515/pmp-2019-0007 ( reposiTUm)

Veselkova, I., Sedlarikova, M., Fafilek, G., & Gierl-Mayer, C. (2019). Electrochemical and Thermal Properties of Gel Polymer Electrolytes Modified by Flame Retadants. ECS Transactions, 95(1), 47–54. https://doi.org/10.1149/09501.0047ecst ( reposiTUm)

Oro, R., Jaliliziyaeian, M., Dunkley, J., Gierl-Mayer, C., & Danninger, H. (2018). New masteralloys for sintered high strength steels - the attractive route between mixing and prealloying. Izvestiya Vysshikh Uchebnykh Zavedenii. Poroshkovaya Metallurgiya i Funktsional’nye Pokrytiya, 4, 15–27. https://doi.org/10.17073/1997-308x-2018-4-15-27 ( reposiTUm)

Danninger, H., de Oro Calderon, R., & Gierl-Mayer, C. (2018). Die Chemie beim Sintern von pulvermetallurgischen Stählen. Giesserei-Praxis, 69(3), 14–20. http://hdl.handle.net/20.500.12708/144534 ( reposiTUm)

Danninger, H., Leitner, G., & Gierl-Mayer, Ch. (2018). STUDYING THE PROGRESS OF SINTERING IN FERROUS POWDER COMPACTS BY IN-SITU MEASURING THE THERMAL CONDUCTIVITY. Powder Metallurgy Progress, 18(2), 80–95. https://doi.org/10.1515/pmp-2018-0009 ( reposiTUm)

de Oro Calderon, R., Jaliliziyaeian, M., Dunkley, J., Gierl-Mayer, C., & Danninger, H. (2018). NEW CHANCES FOR THE MASTERALLOY APPROACH. Powder Metallurgy Progress, 18(2), 121–127. https://doi.org/10.1515/pmp-2018-0014 ( reposiTUm)

Marschnigg, S., Gierl-Mayer, C., Danninger, H., Weirather, T., Granzer, T., & Zobl, P. (2018). Non-destructive measurement of the tungsten content in the binder phase of tungsten heavy alloys. International Journal of Refractory Metals and Hard Materials, 73, 215–220. https://doi.org/10.1016/j.ijrmhm.2018.02.005 ( reposiTUm)

Prieto, E., De Oro Calderon, R., Konegger, T., Gordo, E., Gierl-Mayer, C., Sheikh, S., Guo, S., Danninger, H., Milenkovic, S., & Alvaredo, P. (2018). Processing of a new high entropy alloy: AlCrFeMoNiTi. Powder Metallurgy, 61(3), 258–265. https://doi.org/10.1080/00325899.2018.1457862 ( reposiTUm)

Ouda, K., Danninger, H., & Gierl-Mayer, C. (2018). Magnetic measurement of retained austenite in sintered steels - benefits and limitations. Powder Metallurgy, 61(5), 358–368. https://doi.org/10.1080/00325899.2018.1530850 ( reposiTUm)

Danninger, H., de Oro Calderon, R., & Gierl-Mayer, C. (2018). Chemical reactions during sintering of PM steel compacts as a function of the alloying route. Powder Metallurgy, 61(3), 241–250. https://doi.org/10.1080/00325899.2018.1458489 ( reposiTUm)

Vassileva, V., Danninger, H., Strobl, S., Gierl-Mayer, C., De Oro Calderon, R., & Hutter, H. (2018). THE ROLE OF THE ATMOSPHERE ON BORON-ACTIVATED SINTERING OF FERROUS POWDER COMPACTS. Powder Metallurgy Progress, 18(1), 6–20. https://doi.org/10.1515/pmp-2018-0002 ( reposiTUm)

Müller, D., Knoll, C., Artner, W., Harasek, M., Gierl-Mayer, C., Welch, J. M., Werner, A., & Weinberger, P. (2017). Combining in-situ X-ray diffraction with thermogravimetry and differential scanning calorimetry - An investigation of Co₃O₄, MnO₂ and PbO₂ for thermochemical energy storage. Solar Energy, 153, 11–24. https://doi.org/10.1016/j.solener.2017.05.037 ( reposiTUm)

Deutsch, M., Horvath, F., Knoll, C., Lager, D., Gierl-Mayer, C., Weinberger, P., & Winter, F. (2017). High-Temperature Energy Storage: Kinetic Investigations of the CuO/Cu₂O Reaction Cycle. Energy and Fuels, 31(3), 2324–2334. https://doi.org/10.1021/acs.energyfuels.6b02343 ( reposiTUm)

de Oro Calderon, R., Jaliliziyaeian, M., Gierl-Mayer, C., & Danninger, H. (2017). Effects of H2 Atmospheres on Sintering of Low Alloy Steels Containing Oxygen-Sensitive Masteralloys. JOM Journal of the Minerals, Metals and Materials Society, 69(4), 635–644. https://doi.org/10.1007/s11837-017-2287-9 ( reposiTUm)

de Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2017). Effect of H2 atmospheres on sintering of steels containing oxidation-sensitive elements introduced through the master-alloy route. International Journal of Powder Metallurgy, 53(3), 31–40. http://hdl.handle.net/20.500.12708/146781 ( reposiTUm)

de Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2017). Master Alloys in Powder Metallurgy: the Challenge of Exploring New Alloying Compositions. Powder Metallurgy, 60(2), 86–96. https://doi.org/10.1080/00325899.2016.1269430 ( reposiTUm)

Danninger, H., Vassileva, V., & Gierl-Mayer, C. (2017). Embrittling components in sintered steels: Comparison of phosphorus and boron. Powder Metallurgy Progress, 17(1), 47–64. https://doi.org/10.1515/pmp-2017-0006 ( reposiTUm)

Weil, M., Stöger, B., Larvor, C., Raih, I., & Gierl-Mayer, C. (2017). The hydrous sodium oxotellurates(VI) Na[TeO(OH)5)], Na2[TeO2(OH)4)], Na4[Te2O6(OH)4)](H2O)6, and a third polymorph of anhydrous Na2TeO4. Journal of Inorganic and General Chemistry, 643(23), 1888–1897. http://hdl.handle.net/20.500.12708/147546 ( reposiTUm)

Deutsch, M., Müller, D., Aumeyr, C., Jordan, C., Gierl-Mayer, C., Weinberger, P., Winter, F., & Werner, A. (2016). Systematic search algorithm for potential thermochemical energy storage systems. Applied Energy, 183, 113–120. https://doi.org/10.1016/j.apenergy.2016.08.142 ( reposiTUm)

De Oro Calderon, R., Bernardo, E., Campos, M., Gierl-Mayer, C., Danninger, H., & Torralba, J. M. (2016). Tailoring master alloys for liquid phase sintering: Effect of introducing oxidation-sensitive elements. Powder Metallurgy, 59(1), 31–40. https://doi.org/10.1080/00325899.2016.1148897 ( reposiTUm)

Weil, M., Stöger, B., Gierl-Mayer, C., & Libowitzky, E. (2016). Structural insights into the thermal decomposition sequence of barium thetrahydrogenorthotellurate(VI), Ba[H₄TeO₆]. Journal of Solid State Chemistry, 241, 187–197. https://doi.org/10.1016/j.jssc.2016.06.010 ( reposiTUm)

de Oro Calderon, R., Bernardo, E., Campos, M., Gierl-Mayer, C., Danninger, H., & Torralba, J. M. (2016). Master Alloys for liquid phase sintering: some key points for the design. Metal Powder Report, 71(3), 184–192. https://doi.org/10.1016/j.mprp.2016.03.004 ( reposiTUm)

Üregen, B., Gierl-Mayer, C., & Danninger, H. (2016). Phosphorus in sintered steels: Effect of phosphorus content and P carrier in sintered steel Fe-C-P. Powder Metallurgy Progress, 16(1), 1–13. https://doi.org/10.1515/pmp-2016-0001 ( reposiTUm)

Dlapka, M., Gierl-Mayer, C., Calderon, R. de O., Danninger, H., Bengtsson, S., & Dudrova, E. (2016). REACTION OF UNALLOYED AND Cr-Mo ALLOYED STEELS WITH NITROGEN FROM THE SINTERING ATMOSPHERE. Powder Metallurgy Progress, 16(2), 86–98. https://doi.org/10.1515/pmp-2016-0007 ( reposiTUm)

De Oro Calderon, R., Bernardo, E., Campos, M., Gierl-Mayer, C., Danninger, H., & Torralba, J. M. (2016). Liquid Phases Tailored for Introducing Oxidation-Sensitive Elements through the Master Alloy Route. 粉体および粉末冶金 = Funtai Oyobi Funmatsuyakin = Journal of the Japan Society of Powder and Powder Metallurgy, 63(4), 172–184. https://doi.org/10.2497/jjspm.63.172 ( reposiTUm)

Gierl-Mayer, C., de Oro Calderon, R., & Danninger, H. (2016). The role of oxygen transfer in sintering of low alloy steel powder compacts: a review of the “internal getter” effect. JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 68(3), 920–927. https://doi.org/10.1007/s11837-016-1819-z ( reposiTUm)

de Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2016). Application of thermal analysis techniques to study the oxidation/reduction phenomena during sintering of steels containing oxygen-sensitive alloying elements. Journal of Thermal Analysis and Calorimetry, 217(1), 91–105. https://doi.org/10.1007/s10973-016-5508-5 ( reposiTUm)

Gierl-Mayer, C., & Danninger, H. (2015). Dilatometry coupled with MS as instrument for process control in sintering of powder metallurgy steels. Powder Metall. Progress, 15(1), 3–12. http://hdl.handle.net/20.500.12708/150922 ( reposiTUm)

Vassileva, V., Krecar, D., Tomastik, C., Gierl-Mayer, C., Hutter, H., & Danninger, H. (2015). Phosphorus in sintered steels: Impact fracture behaviour of sintered Fe-P with varying P content. Powder Metall. Progress, 15(1), 36–49. http://hdl.handle.net/20.500.12708/150924 ( reposiTUm)

Azadbeh, M., Danninger, H., & Gierl-Mayer, C. (2015). The influence of first compaction on properties and microstructure of double pressed Cr-Mo prealloyed sintered steel. Powder Metall. Progress, 15(1), 13–22. http://hdl.handle.net/20.500.12708/150923 ( reposiTUm)

Gierl-Mayer, C., Danninger, H., de Oro Calderon, R., & Hryha, E. (2015). “Internal gettering” - metallothermic reduction processes in the early stage of sintering. International Journal of Powder Metallurgy, 51(3), 47–53. http://hdl.handle.net/20.500.12708/150999 ( reposiTUm)

Gschiel, H., Gierl-Mayer, C., Danninger, H., Larsson, P.-O., & Vidarsson, H. (2015). Manufacturing and microstructure of porous metal supports for a solid oxide fuel cell. Powder Metallurgy, 58(3), 178–181. http://hdl.handle.net/20.500.12708/150997 ( reposiTUm)

Oro, R., Campos, M., Gierl-Mayer, C., Danninger, H., & Torralba, J. M. (2015). New alloying systems for sintered steels: Critical aspects of sintering behaviour. Metallurgical and Materials Transactions A, 46(3), 1349–1359. https://doi.org/10.1007/s11661-014-2707-1 ( reposiTUm)

Azadbeh, M., Mohammadzadeh, A., Danninger, H., & Gierl-Mayer, C. (2015). On the densification and elastic modulus of sintered Cr-Mo steels. Metallurgical and Materials Transactions B, 46(3), 1471–1483. https://doi.org/10.1007/s11663-015-0315-0 ( reposiTUm)

Azadbeh, M., Danninger, H., Mohammadzadeh, A., & Gierl-Mayer, C. (2015). Macroscopic illustration of Zn evaporation during liquid phase sintering of Cu-28Zn prepared from prealloyed powder. Powder Metallurgy, 58(2), 91–94. https://doi.org/10.1179/0032589914z.000000000208 ( reposiTUm)

Danninger, H., Weiss, B., Betzwar Kotas, A., Khatibi, G., Sohar, C., Dlapka, M., & Gierl-Mayer, C. (2015). Fatigue response and fractography of sintered materials. Powder Metallurgy Progress, 15(2), 218–233. http://hdl.handle.net/20.500.12708/151375 ( reposiTUm)

Azadbeh, M., Danninger, H., Gierl-Mayer, C., Khatibi, G., & Azadbeh, A. A. (2015). Improving the properties of sintered Al-Zn-Mg-Cu from mixed powder through synchronic effects of sintering and heat treatment. Powder Metallurgy Progress, 15(2), 202–217. http://hdl.handle.net/20.500.12708/151374 ( reposiTUm)

Gianessi, A., Gierl-Mayer, C., & Danninger, H. (2015). Bimodal particle reinforcement for wear resistant powder metallurgy steels. Materials Science Forum, 825–826, 1001–1008. https://doi.org/10.4028/www.scientific.net/msf.825-826.1001 ( reposiTUm)

Boehm, M., Schmoelzer, T., Simon, R., & Gierl-Mayer, C. (2015). Morphology of sintered Cr-Mo porous materials. Materials Science Forum, 825–826, 838–843. https://doi.org/10.4028/www.scientific.net/msf.825-826.838 ( reposiTUm)

Gierl-Mayer, C., Jaliliziyaeian, M., Danninger, H., & Dudrova, E. (2014). Impact behaviour of sintered steels prepared from manganese prealloyed powders. Powder Metall. Progress, 14(2), 73–84. http://hdl.handle.net/20.500.12708/157092 ( reposiTUm)

Gierl-Mayer, C., Bauer, V., Limbeck, A., & Danninger, H. (2014). Analysis of PM-steels containing boron with laser ablation-inductively coupled plasma mass spectrometry. Powder Metallurgy Progress, 14(3), 129–136. http://hdl.handle.net/20.500.12708/157091 ( reposiTUm)

Danninger, H., Gierl-Mayer, C., & Jaliliziyaeian, M. (2014). Effect of phosphorus addition on the impact fracture behaviour of Cr-Mo prealloyed sintered steels. Powder Metallurgy Progress, 14(1), 11–23. http://hdl.handle.net/20.500.12708/157090 ( reposiTUm)

Hradil, K., Avakemian, A., Dlapka, M., Gierl-Mayer, Ch., & Danninger, H. (2013). Röntgenographische Analyse von Restaustenit-Gehalten an pulvermetallurgisch hergestellten Stählen. HTM Journal of Heat Treatment and Materials, 68(6), 267–273. https://doi.org/10.3139/105.110191 ( reposiTUm)

Dlapka, M., Gierl-Mayer, C., Strobl, S., Huemer, M.-C., & Danninger, H. (2013). Austenitkornstabilität in pulvermetallurgischen Stählen bei hohen Sinter- und Wärmebehandlungstemperaturen. HTM Journal of Heat Treatment and Materials, 68(4), 188–195. https://doi.org/10.3139/105.110193 ( reposiTUm)

Klammer, E., Dlapka, M., Gierl-Mayer, C., & Danninger, H. (2013). Trockenlauf-Gleitverschleiß von sintergehärteten Stählen. HTM Journal of Heat Treatment and Materials, 68(3), 142–149. https://doi.org/10.3139/105.110189 ( reposiTUm)

Dadal, E., Gierl-Mayer, C., Danninger, H., Sencekova, L., Izdinsky, K., & Simancik, F. (2013). Powder metallurgy manufacturing of porous molybdenum preforms for Si infiltration. Powder Metallurgy Progress, 13(3–4), 93–102. http://hdl.handle.net/20.500.12708/156900 ( reposiTUm)

Ponomarev, M. G., Kappatos, V., Selcuk, C., Gan, T.-H., Amos, M., Halai, H., Gierl, C., & Iovea, M. (2013). Digital radiographic inspection technique for production friendly quality assessment of PM parts. Powder Metallurgy, 56(2), 92–95. https://doi.org/10.1179/0032589913z.000000000103 ( reposiTUm)

Azadbeh, M., Danninger, H., & Gierl-Mayer, C. (2013). Particle rearrangement during liquid phase sintering of Cu-20Zn and Cu-10Sn-10Pb prepared from prealloyed powder. Powder Metallurgy, 56(5), 342–346. https://doi.org/10.1179/0032589913z.000000000138 ( reposiTUm)

Konegger, T., Liersch, A., Gierl, C., & Scheffler, M. (2013). Bulk Ceramic Composites Derived from a Preceramic Polysilazane with Alumina and Zirconia Fillers. Advanced Engineering Materials, 15(5), 394–406. http://hdl.handle.net/20.500.12708/154746 ( reposiTUm)

Dlapka, M., Danninger, H., Gierl, C., & Lindqvist, B. (2012). Sinterhärten - eine spezielle Wärmebehandlung für pulvermetallurgische Präzisionsteile. HTM Journal of Heat Treatment and Materials, 67(3), 223–231. https://doi.org/10.3139/105.110147 ( reposiTUm)

Mohsin, I. U., Gierl, C., Danninger, H., & Ata, S. (2012). Thermal debinding study of powder injection moulded Fe + 12%Cu using TG/MS. Powder Metallurgy, 55(2), 118–123. https://doi.org/10.1179/1743290111y.0000000023 ( reposiTUm)

Dlapka, M., Danninger, H., & Gierl, C. (2012). Factors influencing austenite grain size in sinter-hardened low alloy steels. International Journal of Powder Metallurgy, 48(4), 45–54. http://hdl.handle.net/20.500.12708/163778 ( reposiTUm)

Momeni, M., Gierl, C., Danninger, H., Mohsin, I. U., & Arvand, A. (2012). Sintering of Fe-C-BN steel compacts in different atmospheres studied by dilatometry and DTA/TG. Powder Metallurgy, 55(3), 212–221. https://doi.org/10.1179/1743290111y.0000000011 ( reposiTUm)

Mohsin, I. U., Lager, D., Hohenauer, W., Ata, S., Gierl, C., & Danninger, H. (2012). Finite element investigation of backbone binder removal from MIM copper compact. Powder Metallurgy, 55(5), 333–339. https://doi.org/10.1179/1743290112y.0000000009 ( reposiTUm)

Dlapka, M., Danninger, H., Gierl, C., Altena, H., Stetina, G., & Orth, P. (2012). Niederdruckaufkohlung von chromhaltigen Sinterstählen für Zahnräder. HTM Journal of Heat Treatment and Materials, 67(2), 158–165. https://doi.org/10.3139/105.110146 ( reposiTUm)

Dlapka, M., Danninger, H., Gierl, C., Klammer, E., Weiss, B., Khatibi, G., & Betzwar-Kotas, A. (2012). Fatigue behavior and wear resistance of sinter-hardening steels. International Journal of Powder Metallurgy, 48(5), 49–60. http://hdl.handle.net/20.500.12708/163970 ( reposiTUm)

Gierl, C., Danninger, H., Avakemian, A., Synek, J., Sattler, J., Zlatkov, B. S., ter Maat, J., Arzl, A., & Neubing, H. C. (2012). Carbon removal as a crucial parameter in the Powder Injection Moulding of aluminium alloys. Powder Injection Moulding International, 6(4), 65–71. http://hdl.handle.net/20.500.12708/164397 ( reposiTUm)

Momeni, M., Gierl, C., Danninger, H., & Avakemian, A. (2012). Thermoanalytical sintering studies of Fe-C admixed with ferroboron performed in different atmospheres. Powder Metallurgy, 55(1), 54–64. https://doi.org/10.1179/1743290111y.0000000020 ( reposiTUm)

Danninger, H., Xu, C., Gierl, C., Avakemian, A., & Huemer, M.-C. (2012). In-situ characterization of the sintering process through process-temperature control rings. Powder Metallurgy Progress, 12(3), 168–180. http://hdl.handle.net/20.500.12708/165017 ( reposiTUm)

Kuzmanovic, J., Danninger, H., Gierl, C., Zbiral, J., Halwax, E., & Zikin, A. (2012). Preparation and properties of sintered Fe and Ni based MMCs reinforced with fused tungsten carbide particles. Powder Metallurgy Progress, 12(2), 84–97. http://hdl.handle.net/20.500.12708/164422 ( reposiTUm)

Momeni, M., Gierl, C., & Danninger, H. (2011). Study of the oxide reduction and interstitial contents during sintering of different plain carbon steels by in situ mass spectrometry in nitrogen atmosphere. Materials Chemistry and Physics: Including Materials Science Communications, 129(1–2), 209–216. https://doi.org/10.1016/j.matchemphys.2011.03.076 ( reposiTUm)

Mohsin, I. U., Gierl, C., & Danninger, H. (2011). Sintering study of injection molded W-8%Ni-2%Cu compacts from mixed powders by thermoanalytical techniques. International Journal of Refractory Metals and Hard Materials, 29(4), 532–537. https://doi.org/10.1016/j.ijrmhm.2011.03.006 ( reposiTUm)

Danninger, H., Gierl, C., Mühlbauer, G., Silva Gonzalez, M., Schmidt, J., & Specht, E. (2011). Thermophysical properties of sintered steels: Effect of porosity. International Journal of Powder Metallurgy, 47(3), 31–42. http://hdl.handle.net/20.500.12708/161909 ( reposiTUm)

Ul Mohsin, I., Lager, D., Gierl, C., Hohenauer, W., & Danninger, H. (2011). Simulation and optimisation for thermal debinding of copper MIM parts using thermokinetic analysis. Powder Metallurgy, 54(1), 30–35. https://doi.org/10.1179/003258910x12740974839620 ( reposiTUm)

Dlapka, M., Danninger, H., Gierl, C., Weiss, B., Khatibi, G., & Betzwar-Kotas, A. (2011). Critical defects in different sinter hardening grade steels tested under gigacycle fatigue loading. Powder Metall. Progress, 11(1–2), 69–77. http://hdl.handle.net/20.500.12708/162438 ( reposiTUm)

Momeni, M., Danninger, H., Gierl, C., Dudrova, E., & Arvand, A. (2011). Relationship bertween tensile toughness and impact energy of Mo prealloyed and Ni-Cu-Mo diffusion bonded sintered steels. Powder Metall. Progress, 11(1–2), 62–68. http://hdl.handle.net/20.500.12708/162437 ( reposiTUm)

Gierl, C., Harrer, B., Danninger, H., Kastner, J., & Schneider, R. (2011). X-ray computed tomography for quantification of secondary pore structures im PM steels. Powder Metall. Progress, 11(1–2), 85–89. http://hdl.handle.net/20.500.12708/162439 ( reposiTUm)

Danninger, H., Avakemian, A., & Gierl, C. (2011). Fracture morphology of green cracks in sintered PM steels. Powder Metallurgy Progress, 11(1–2), 3–11. http://hdl.handle.net/20.500.12708/162436 ( reposiTUm)

Danninger, H., Sohar, C., Gierl Mayer, C., Betzwar-Kotas, A., & Weiss, B. (2011). Gigacycle fatigue response of PM versus ingot metallurgy tool steels. Materials Science Forum, 672, 23–30. https://doi.org/10.4028/www.scientific.net/msf.672.23 ( reposiTUm)

Danninger, H., Jaliliziyaeian, M., Gierl Mayer, C., & Bengtsson, S. (2011). Chemical reactions during sintering of Mn and Mn-Cr prealloyed steels in inert versus reducing atmospheres. Materials Science Forum, 672, 203–206. https://doi.org/10.4028/www.scientific.net/msf.672.203 ( reposiTUm)

Mohammadi, M. S., Simchi, A., & Gierl, C. (2010). Phase formation and microstructural evolution during sintering of Al-Zn-Mg-Cu alloys. Powder Metallurgy, 53(1), 62–70. https://doi.org/10.1179/003258908x344707 ( reposiTUm)

Mohsin, I. U., Lager, D., Gierl, C., Hohenauer, W., & Danninger, H. (2010). Thermo-kinetics study of MIM thernal de-binding using TGA coupled with FTIR and mass spectrometry. Thermochimica Acta, 503–504, 40–45. https://doi.org/10.1016/j.tca.2010.03.005 ( reposiTUm)

Hryha, E., Gierl, C., Nyborg, L., Danninger, H., & Dudrova, E. (2010). Surface composition of the steel powders pre-alloyed with manganese. Applied Surface Science, 256(12), 3946–3961. https://doi.org/10.1016/j.apsusc.2010.01.055 ( reposiTUm)

Dlapka, M., Danninger, H., Gierl, C., & Lindqvist, B. (2010). Sinter hardening Cr-Mo prealloyed steels with sufficient toughness. Powder Metallurgy Progress, 10(1), 20–31. http://hdl.handle.net/20.500.12708/168177 ( reposiTUm)

Danninger, H., Harold, C., Gierl, C., Ponemayr, H., Daxelmüller, M., Simancik, F., & Izdinsky, K. (2010). Powder metallurgy manufacturing of carbon-free precipitation-hardened high speed steels. Acta Physica Polonica A, 117(5), 825–830. http://hdl.handle.net/20.500.12708/167105 ( reposiTUm)

Dlapka, M., Danninger, H., Gierl, C., & Lindqvist, B. (2010). Defining the pores in PM components. Metal Powder Report, 65(2), 30–33. http://hdl.handle.net/20.500.12708/166820 ( reposiTUm)

Dlapka, M., Strobl, S., Danninger, H., & Gierl, C. (2010). Austenitkorngröße in sintergehärteten pulvermetallurgischen Stählen. Praktische Metallographie, 47(12), 686–699. https://doi.org/10.3139/147.110099 ( reposiTUm)

Sohar, C., Betzwar-Kotas, A., Gierl, C., Danninger, H., & Weiss, B. (2010). Gigacycle fatigue response of tool steels produced by powder metallurgy compared to ingot met : Dedicated to Prof. Dr. Hans-Peter Degischer on the occasion of his 65^t^h birthdayallurgy tool steels. International Journal of Materials Research, 101(9), 1140–1150. https://doi.org/10.3139/146.110395 ( reposiTUm)

Zlatkov, B. S., Bavdek, U., Nikolic, M. V., Aleksic, O. S., Danninger, H., Gierl, C., & Erman, A. (2009). Magnetic properties of alnico8 sintered magnets produced by powder injection moulding. Powder Injection Moulding International, 3(3), 58–63. http://hdl.handle.net/20.500.12708/165760 ( reposiTUm)

Sohar, C., Betzwar-Kotas, A., Gierl, C., Weiss, B., & Danninger, H. (2009). Fatigue behaviour of M2 and M42 high speed steel up to the gigacycle regime. Kovove Materialy - Metallic Materials, 47(3), 147–158. http://hdl.handle.net/20.500.12708/165700 ( reposiTUm)

Sohar, C., Betzwar-Kotas, A., Gierl, C., Weiss, B., & Danninger, H. (2009). PM tool steels push the edge in fatigue tests. Metal Powder Report, 64(2), 12–17. http://hdl.handle.net/20.500.12708/165277 ( reposiTUm)

Dlapka, M., Gierl, C., Danninger, H., Altena, H., Orth, P., & Stetina, G. (2009). Niederdruckaufkohlung von Sinterstahl-Präzisionsteilen mit gradierter Porosität. BHM Berg- Und Hüttenmännische Monatshefte, 154(5), 200–204. http://hdl.handle.net/20.500.12708/165522 ( reposiTUm)

Gierl, C., Jaliliziyaeian, M., Danninger, H., Vasilko, K., & Salak, A. (2009). Comparison of CaS and MnS as machining aids in sintered steels. Powder Metallurgy Progress, 9(2), 67–78. http://hdl.handle.net/20.500.12708/167304 ( reposiTUm)

Danninger, H., Gierl, C., & Salak, A. (2009). Relationship between apparent hardness and tensile strength in PM iron and steels sintered at standard temperatures. Powder Metallurgy Progress, 9(1), 1–13. http://hdl.handle.net/20.500.12708/166336 ( reposiTUm)

Sohar, C., Betzwar-Kotas, A., Gierl, C., Weiss, B., & Danninger, H. (2008). Gigacycle fatigue behaviour of a high chromium alloyed cold work tool steel. International Journal of Fatigue, 30(7), 1137–1149. https://doi.org/10.1016/j.ijfatigue.2007.09.012 ( reposiTUm)

Danninger, H., & Gierl, C. (2008). New Alloying Systems for Ferrous Powder Metallurgy Precision Parts. Science of Sintering, 40(1), 33–46. https://doi.org/10.2298/sos0801031d ( reposiTUm)

Sohar, C. R., Betzwar-Kotas, A., Gierl, C., Weiss, B., & Danninger, H. (2008). Influence of surface residual stresses on gigacycle fatigue response of high chromium cold work tool steel. Materials Science & Engineering Technology, 39(3), 248–257. https://doi.org/10.1002/mawe.200700216 ( reposiTUm)

Zlatkov, B. S., Griesmayer, E., Loibl, H., Aleksic, O. S., Danninger, H., Gierl, C., & Lukic, L. S. (2008). Recent advances in CIM technology. Science of Sintering, 40(2), 185–195. https://doi.org/10.2298/sos0802185z ( reposiTUm)

Sohar, C., Betzwar-Kotas, A., Gierl, C., Weiss, B., & Danninger, H. (2008). Gigacycle fatigue fractography of cold work tool steels produced by PM compared to ingot metallurgy. Powder Metall. Progress, 8(3), 190–195. http://hdl.handle.net/20.500.12708/171236 ( reposiTUm)

Jaliliziyaeian, M., Gierl, C., Danninger, H., & Dudrova, E. (2008). Fracture surfaces studied on PM steels prepared from prealloyed steel powders and sintered in different atmospheres. Powder Metall. Progress, 8(2), 128–134. http://hdl.handle.net/20.500.12708/171238 ( reposiTUm)

Zlatkov, B. S., Griesmayer, E., Loibl, H., Aleksic, O. S., Danninger, H., Gierl, C., & Lukic, L. S. (2008). Recent Advances in PIM Technology I. Science of Sintering, 40(1), 79–88. https://doi.org/10.2298/sos0801077z ( reposiTUm)

Sohar, C., Betzwar-Kotas, A., Gierl, C., Weiss, B., & Danninger, H. (2008). Fractographic evaluation of gigacycle fatigue crack nucleation and propagation of a high Cr alloyed cold work tool steel. International Journal of Fatigue, 30(12), 2191–2199. https://doi.org/10.1016/j.ijfatigue.2008.05.013 ( reposiTUm)

Momeni, M., Gierl, C., & Danninger, H. (2008). Ratio tensile strength - Vickers hardness in sintered steels as a function of the sintering temperatures. Powder Metall. Progress, 8(3), 183–189. http://hdl.handle.net/20.500.12708/171240 ( reposiTUm)

Gierl, C., Ul Mohsin, I., & Danninger, H. (2008). Boron activated sintering of PM steels - alternative boron sources. Powder Metall. Progress, 8(2), 135–141. http://hdl.handle.net/20.500.12708/171237 ( reposiTUm)

Azadbeh, M., Danninger, H., & Gierl, C. (2008). Study on the interparticle bonding of double pressed PM alloy steels. Powder Metallurgy Progress, 8(2), 83–90. http://hdl.handle.net/20.500.12708/171239 ( reposiTUm)

Sohar, C., Betzwar-Kotas, A., Gierl, C., Weiss, B., & Danninger, H. (2008). Anisotropy effects on gigagcycle fatigue behaviour of high Cr alloyed cold work tool steel. KOVOVE MATERIALY-METALLIC MATERIALS, 46, 197–207. http://hdl.handle.net/20.500.12708/170326 ( reposiTUm)

Danninger, H., & Gierl, C. (2007). Powder metallurgy steels for highly loaded precision parts. International Journal of Materials and Product Technology, 28(3/4), 338–360. http://hdl.handle.net/20.500.12708/169301 ( reposiTUm)

Kupková, M., Kupka, M., Strobl, S., Černý, M., Khatibi, G., & Gierl, C. (2007). On a discrepancy in modulus of elasticity as determined from separate resonance frequencies of a bar sintered from copper-coated iron powder. Scripta Materialia, 57(7), 639–642. https://doi.org/10.1016/j.scriptamat.2007.06.001 ( reposiTUm)

Kupkova, M., Kupka, M., Strobl, S., Gierl, C., & Wagesreither, J. (2007). On the unusual dimensional response of compacted copper-coated iron powders to sintering. Powder Metallurgy Progress, 7(1), 35–43. http://hdl.handle.net/20.500.12708/169442 ( reposiTUm)

Liersch, A., Danninger, H., Gierl, C., & Ratzi, R. (2007). The role of admixed hexagonal boron nitride in sintered steels: 1. Effect on sintering and microstructure. Powder Metallurgy Progress, 7(1), 1–11. http://hdl.handle.net/20.500.12708/169413 ( reposiTUm)

Azadbeh, M., Danninger, H., & Gierl, C. (2007). As-repressed properties of double compacted Cr-Mo and Mo prealloyed PM steels. Metal Powder Report, 7(3), 128–138. http://hdl.handle.net/20.500.12708/169569 ( reposiTUm)

Azadbeh, M., Gierl, C., & Danninger, H. (2006). Elastic properties of Cr-Mo alloyed sintered steels: a comparison of dynamic and static Young’s moduli. Powder Metallurgy Progress, 6(1), 1–10. http://hdl.handle.net/20.500.12708/173202 ( reposiTUm)

Strobl, S., Gierl, C., Konegger, T., Kupkova, M., & Kabatova, M. (2006). Formation of structures with a microgradient in sintered iron-based powders by copper-coating. Powder Metallurgy Progress, 6(4), 149–155. http://hdl.handle.net/20.500.12708/173306 ( reposiTUm)

Danninger, H., Gierl, C., Kremel, S., Leitner, G., Jaenicke-Rößler, K., & Yu, Y. (2002). Degassing and deoxidation processes during sintering of unalloyed and alloyed PM steels. Powder Metall. Progress, 2(3), 125–140. http://hdl.handle.net/20.500.12708/174634 ( reposiTUm)

Beiträge in Tagungsbänden

Gierl-Mayer, C., Stark Lukas, & Holzer, A. (2025). Small Batch Production Of Stainless Steel Powders For Additive Manufacturing And Their Characterisation. In Euro PM2025 Proceedings. Euro PM2025 Congress and Exhibition, Glasgow, United Kingdom of Great Britain and Northern Ireland (the). https://doi.org/10.59499/EP256763773 ( reposiTUm)

Danninger, H., Hojati, M., Geroldinger, S., de Oro Calderon, R., Gierl-Mayer, C., & Hellein, R. (2025). Deoxidation And Internal Gettering In Advanced Hybrid Alloyed Sintered Steels. In Euro PM2025 Congress Proceedings. EPMA 2025, Glasgow, United Kingdom of Great Britain and Northern Ireland (the). https://doi.org/10.59499/EP256679196 ( reposiTUm)

Danninger, H., De Oro Calderon, R., & Gierl-Mayer, C. (2024). Multiple alloying variants – a special feature of powder metallurgy. In Abstract Book : ISNNM-2024: The 18th International Symposium on Novel and Nano Materials (pp. 63–63). ( reposiTUm)

Dvorak, A., Geroldinger, S., Bosters, J., De Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2024). Liquid Phase-Enhance Molybdenum Homogenization during Sintering of PM Steels. In Molybdenum Symposium 2024 : E-Book (pp. 17–20). http://hdl.handle.net/20.500.12708/210450 ( reposiTUm)

Geroldinger, S., Hojati, M., Dvorak, A., De Oro Calderon, R., Gierl-Mayer, C., Danninger, H., & Hellein, R. (2024). Sinter Hardening Hybrid Alloyed PM Steels based on MO Prealloyed Powders. In Molybdenum Symposium 2024 : E-Book (pp. 26–30). http://hdl.handle.net/20.500.12708/210451 ( reposiTUm)

Gierl-Mayer, C., & Danninger, H. (2022). Physical Properties of Sintered Steels: Effect on Young’s Modulus, Damping and Electrical Conductivity. In Proceedings of World PM2022, Congress and Exhibition. World PM2022 Congress and Exhibition, Lyon, France. http://hdl.handle.net/20.500.12708/139442 ( reposiTUm)

Danninger, H., Hojati, M., Tokatligil, D. D., Konegger, T., & Gierl-Mayer, C. (2022). Measurement of the pore diameter in sitnered steels with varying porosity. In Proceedings of World PM2022, Congress and Exhibition (p. 5368092). ( reposiTUm)

Hojati, M., Gierl-Mayer, C., & Danninger, H. (2022). Monotonic And Cyclic Propertie OF Sinter Hardenedf PM Steels Prepared By Hybrid Alloying. In European Powder Metallurgy Association (Ed.), Proceedings World PM2022. ( reposiTUm)

Geroldinger, S., De Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2022). Properties Of PM Steel Alloyed Through The Masteralloy Route - A Comparison To Conventional PM Grades. In Proceedings of World PM2022, Congress and Exhibition. World PM2022 Congress And Exhibition, Lyon, France. http://hdl.handle.net/20.500.12708/139441 ( reposiTUm)

Pretterhofer, S., & Gierl-Mayer, C. (2022). Pulvermetallurgische Herstellung und Charakterisierung von AlB4-Blechen für Nuklear Anwendungen. In C. Broeckmann & A. Kaletsch (Eds.), Pulvermetallurgie - vielfältige Prozesse und Werkstoffe (pp. 147–166). Fachverband Pulvermetallurgie. http://hdl.handle.net/20.500.12708/142152 ( reposiTUm)

Schneider, M., Danninger, H., & Gierl-Mayer, C. (2022). Effect Of Tempering And Nitrogen Content On The Heat-treated Impact Toughness Of Sintered Steels. In Proceedings of World PM2022 Congress and Exhibition. World PM2022 Congress and Exhibition, Lyon, France. http://hdl.handle.net/20.500.12708/139447 ( reposiTUm)

Mitterlehner, M., Gschiel, H., Danninger, H., & Gierl-Mayer, C. (2021). Investigation of the Impact of Powder Shape on Spreading Dense Layers Using the Spreading Tester. In Proceedings of the Metal Additive Manufacturing Conference 2021 (pp. 199–210). ASMET. http://hdl.handle.net/20.500.12708/50822 ( reposiTUm)

Hojati, M., Gierl-Mayer, C., & Danninger, H. (2021). Effect of sintering temperature on microstructure and physical properties of differently compacted carbon and Mo alloyed steels. In Proceedings EuroPM2021 (p. 7). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/50829 ( reposiTUm)

Danninger, H., Prokofyev, M., Gierl-Mayer, C., Hellein, R., & Müller, A. (2021). Sintering of PM Steels with High Mn Content -- Using the Masteralloy Route. In Proceedings EuroPM2021 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/50828 ( reposiTUm)

Gierl-Mayer, C., Stepan, T., Caliskanoglu, O., Weinberger, T., & Danninger, H. (2021). Chromium as alloying element in Mo base material- mechanical behavior at high temperatures. In Proceedings EuroPM2021 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/49659 ( reposiTUm)

Geroldinger, S., de Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2021). Carbon as Key Element for the Behaviour of “Tailored” Liquid Phases During Sintering. In Proceedings EuroPM2021 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/49658 ( reposiTUm)

Hojati, M., Gierl-Mayer, C., & Danninger, H. (2021). Effect of sintering atmosphere on sintering process, microstructure and mechanical properties of compacted plain iron and carbon steel. In Proceedings EuroPM2021 (p. 8). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/49657 ( reposiTUm)

Danninger, H., de Oro Calderon, R., & Gierl-Mayer, C. (2021). The use of transient liquid phases in powder metallurgy. In Materials Science Forum (Vol. 1016, pp. 69–76). Trans Tech Publications. https://doi.org/10.4028/www.scientific.net/MSF.1016.69 ( reposiTUm)

Mitterlehner, M., Danninger, H., Gierl-Mayer, C., Fürst, M., & Gschiel, H. (2020). Spreading Behaviour and Packing Density of the Powder Bed in L-PBF as a Function of Spreading Strategy and Velocity. In Proceedings EuroPM2020 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/49596 ( reposiTUm)

Geroldinger, S., de Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2020). Properties And Microstructures Of Sintered Steels Allyed With Cr,Mn And Si By The Masteralloy Route. In Proceedings EuroPM2020 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/49597 ( reposiTUm)

Momeni, M., Danninger, H., & Gierl-Mayer, C. (2020). Electrical Conductivity and Physical Properties Of Sintered Steels Prepared from Different Base Powders. In Proceedings EuroPM2020 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/49598 ( reposiTUm)

Mitterlehner, M., Danninger, H., Gierl-Mayer, C., & Gschiel, H. (2020). Investigation of the Influence of Powder Moisture on the Spreadability Using the Spreading Tester. In Proceedings of the Metal Additive Manufacturing Conference 2020. Online Conference “MAMC-2020 - Metal Additive Manufacturing Conference,” Leoben, Austria. ASMET. http://hdl.handle.net/20.500.12708/50776 ( reposiTUm)

Gierl-Mayer, C., Prokofyev, M., Huemer, M.-C., Hellein, R., Bolitschek, J., Müller, A., & Danninger, H. (2020). Powder Metallurgy Manufacturing Of Hadfield-Type Mn Steels With TRIP Behaviour. In Proceedings EuroPM2020 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/50782 ( reposiTUm)

Gierl-Mayer, C., Matl, G., Bonta, M., Limbeck, A., Dlapka, M., & Danninger, H. (2020). Laser induced breakdown spectroscopy (LIBS) for C-profile measurements. In Proceedings ECHT2020 (p. 8). A3TS and VWT. http://hdl.handle.net/20.500.12708/50791 ( reposiTUm)

Gökdeniz, Z. G., Khatibi, G., Gierl-Mayer, C., Steiger-Thirsfeld, A., & Mündlein, M. (2020). Temperature Dependent Physical Properties of Sintered Silver Layers for Power Electronics. In Proceedings of the 43rd International Spring Seminar on Electronics Technology - 2020 (pp. 1–8). IEEE. http://hdl.handle.net/20.500.12708/77303 ( reposiTUm)

Mitterlehner, M., Danninger, H., Gierl-Mayer, C., Gschiel, H., & Hatzenbichler, M. (2020). Processability of Moist Superalloy Powder by SLM. In Proceedings of the Metal Additive Manufacturing Conference 2020 (pp. 111–123). ASMET. http://hdl.handle.net/20.500.12708/50762 ( reposiTUm)

Geroldinger, S., de Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2019). Optimization of Liquid Phases for Enhancing Sintering of PM‐Steels. In Proceedings Euro PM2019 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/50540 ( reposiTUm)

Mitterlehner, M., Danninger, H., & Gierl-Mayer, C. (2019). Study on Segregation Effects in Powder Layers Built in Powder Bed Fusion Processes for Additive Manufacturing. In Proceedings Euro PM2019 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/50542 ( reposiTUm)

Momeni, M., Danninger, H., & Gierl-Mayer, C. (2019). Changes in Pore Connectivity during Sintering of High Density Powder Compacts at Varying Temperatures. In Proceedings Euro PM2019 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/50541 ( reposiTUm)

Azadbeh, M., Milani, S., Danninger, H., & Gierl-Mayer, C. (2019). Influence of Heat Treating on Microstructural Evolution and Mechanical Properties of Spark Plasma Sintered Cu-14Al-4Ni Mixed Powder. In Proceedings Euro PM2019 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/50613 ( reposiTUm)

Gierl-Mayer, C., Salfinger, M., Scherleitner, E., Krautgasser, C., Hellein, R., & Danninger, H. (2019). Determination of Young’s Modulus and Damping Behaviour of PM Structural Steels. In Proceedings Euro PM2019 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/50614 ( reposiTUm)

Gierl-Mayer, C., de Oro Calderon, R., & Danninger, H. (2019). Die Masteralloy-Route als attraktive Legierungsvariante für sinterhärtende Stähle. In Tagungsband ASMET Werkstofftechniktagung nud 31. Härtereitagung (p. 9). ASMET. http://hdl.handle.net/20.500.12708/50428 ( reposiTUm)

Danninger, H., de Oro Calderon, R., & Gierl-Mayer, C. (2019). Legierungssysteme für die Wärmebehandlung von Sinterstählen. In Tagungsband Werkstofftechniktagung & 31. Härtereitagung (p. 9). ASMET. http://hdl.handle.net/20.500.12708/50427 ( reposiTUm)

Pretterhofer, S., Frühwirth, H., Gierl-Mayer, C., & Danninger, H. (2019). Sintering Behavior of Al-B4C Powder Material and its Phase Evolution during Rolling. In Proceedings of the 19#^{th} International Symposium on the Packaging and Transportation of Radioactive Materials PATRAM 2019; August 4-9, 2019, New Orleans, LA, USA (pp. 1–10). http://hdl.handle.net/20.500.12708/50766 ( reposiTUm)

Mitterlehner, M., Danninger, H., Gierl-Mayer, C., Frank, J., & Tomischko, W. (2019). Study On The Influence Of The Blade On The Powder Layers Built In Powder Bed Fusion Processes For Additive Manufacturing. In Proceedings: MAMC 2019 Metal Additive Conference, Industrial Perspectives in Additive Technologies (p. 11). http://hdl.handle.net/20.500.12708/50659 ( reposiTUm)

Marschnigg, S., Gierl-Mayer, C., Danninger, H., Weirather, T., Granzer, T., & Zobl, P. (2019). Improving the Characterization of the Binder Phase in W Heavy Alloys by Chemical Pretreatment. In Proceedings Euro PM2019 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/50539 ( reposiTUm)

Mitterlehner, M., Danninger, H., & Gierl-Mayer, C. (2018). A new method for describing the morphology of powder layers in direct laser melting. In Proceedings MAMC-2018 (pp. 31–40). ASMET. http://hdl.handle.net/20.500.12708/50285 ( reposiTUm)

Mitterlehner, M., Danninger, H., & Gierl-Mayer, C. (2018). Study on the layer building of powders in powder bed fusion processes for Additive Manufacturing. In Proceedings EuroPM2018 (p. 7). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/50246 ( reposiTUm)

Ouda, K., Danninger, H., & Gierl-Mayer, C. (2018). Magnetic measurements complemented by thermodynamic calculations as tools for characterizing the microstructure of PM steels. In Proceedings EuroPM2018 (p. 7). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/50248 ( reposiTUm)

de Oro Calderon, R., Steinlechner, R., Jaliliziyaeian, M., Dunkley, J. J., Gierl-Mayer, C., & Danninger, H. (2018). Masteralloys: a key to tailor hardenability. In Proceedings EuroPM2018 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/50249 ( reposiTUm)

Gierl-Mayer, C., Jetzinger, M., & Danninger, H. (2018). Thermoanalytical characterization of deoxidation behaviour and carbon dissolution in PM-carbon steels of high density. In Proceedings EuroPM2018 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/50243 ( reposiTUm)

Danninger, H., Gierl-Mayer, C., & Jaliliziyaeian, M. (2018). Combined thermal and chemical analysis for studying the reactions of P carriers in ferrous compacts. In Proceedings EuroPM2018 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/50242 ( reposiTUm)

de Oro Calderon, R., Jaliliziyaeian, M., Dunkley, J. J., Gierl-Mayer, C., & Danninger, H. (2018). The real benefits of high sintering temperatures on the properties of low alloy sintered steels containing masteralloys. In Proceedings EuroPM2018 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/50244 ( reposiTUm)

de Oro Calderon, R., Jaliliziyaeian, M., Gierl-Mayer, C., & Danninger, H. (2018). Adapting sintering processes to successfully sinter “challenging” materials. In Proceedings EuroPM2018 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/50245 ( reposiTUm)

Danninger, H., de Oro Calderon, R., & Gierl-Mayer, C. (2018). Surface Chemistry of Metal Powders and Changes during the Sintering Process. In Proceedings WorldPM2018 (p. 6). The Chinese Society for Metals. http://hdl.handle.net/20.500.12708/50226 ( reposiTUm)

de Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2018). Sintering Enhancement by the Use of Masteralloys: Important Concepts and New Possibilities. In Proceedings WorldPM2018 (p. 11). The Chinese Society for Metals. http://hdl.handle.net/20.500.12708/50227 ( reposiTUm)

de Oro Calderon, R., Jaliliziyaeian, M., Gierl-Mayer, C., & Danninger, H. (2018). Effect of Sintering Conditions on the Properties of Lean PM Steels Produced through the Masteralloy Route. In Proceedings WorldPM2018 (p. 8). The Chinese Society for Metals. http://hdl.handle.net/20.500.12708/50228 ( reposiTUm)

Gierl-Mayer, C., Jetzinger, M., Dunkley, J. J., & Danninger, H. (2018). Sintering of PM-Steels with C-Masteralloy Addition. In Proceedings WorldPM2018 (p. 8). The Chinese Society for Metals. http://hdl.handle.net/20.500.12708/50029 ( reposiTUm)

de Oro Calderon, R., Jaliliziyaeian, M., Dunkley, J. J., Gierl-Mayer, C., & Danninger, H. (2018). Enhanced Hardenability of Lean Sintered Steels by the Use of Fine Masteralloy Powders. In Proceedings WorldPM2018 (p. 7). The Chinese Society for Metals. http://hdl.handle.net/20.500.12708/50229 ( reposiTUm)

Marschnigg, S., Gierl-Mayer, C., Danninger, H., Weirather, T., Granzer, T., & Zobl, P. (2017). Non-destructive measurement of the tungsten content in the binder phase of tungsten heavy alloys. In Proceedings 19. Plansee Seminar 2017 (p. 9). Plansee Group Service GmbH. http://hdl.handle.net/20.500.12708/49926 ( reposiTUm)

Limbeck, A., Bonta, M., Calderon, R. de O., Gierl-Mayer, C., & Danninger, H. (2017). Elemental mapping of PM steels using LA-ICP-MS: laterally resolved analysis of metallic and non-metallic elements. In Book of Abstracts (p. 9). http://hdl.handle.net/20.500.12708/50107 ( reposiTUm)

Gierl-Mayer, C., Jetzinger, M., Jaliliziyaeian, M., Dunkley, J. J., & Danninger, H. (2017). C-Masteralloy: an Innovative Approach to Introduce Carbon in PM-steels. In Proceedings EuroPM 2017 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/49936 ( reposiTUm)

Gierl-Mayer, C., Tükör, Z., & Danninger, H. (2017). Chemically heterogeneous PM steels prepared from base powder. In Proceedings EuroPM 2017 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/49937 ( reposiTUm)

Mitteramtskogler, G., Schwentenwein, M., Seisenbacher, S., Burkhardt, C., Weber, O., & Gierl-Mayer, C. (2017). Lithographic Additive Manufactoring of Metal-based Suspensions. In Proceedings (p. 7). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/50022 ( reposiTUm)

Gierl-Mayer, C., Matl, G., Bonta, M., Limbeck, A., Dlapka, M., & Danninger, H. (2017). C-profile Measurements by Laser Induced Breakdown Spectroscopy (LIBS). In Proceedings EuroPM 2017 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/49940 ( reposiTUm)

Calderon, R. de O., Gierl-Mayer, C., & Danninger, H. (2017). Die Masteralloy-Route für legierte Sinterstähle - neue Konzepte und Perspektiven. In Pulvermetallurgie - Schlüssel zur Mobilität (pp. 159–184). Pulvermetallurgie in Wissenschaft und Praxis. http://hdl.handle.net/20.500.12708/49997 ( reposiTUm)

Deutsch, M., Horvath, F., Gierl-Mayer, C., Werner, A., & Winter, F. (2017). Kinetic Investigations of the Reaction Cycle CuO/Cu2O for Thermo-chemical Energy Storage. In Kurzfassungen (p. 21). http://hdl.handle.net/20.500.12708/49756 ( reposiTUm)

Prieto Munoz, E. M., de Oro Calderon, R., Konegger, T., Gordo Oderiz, E., Gierl-Mayer, C., Danninger, H., & Alvaredo Olmos, P. (2017). Study of sintering behavior of TiAlCrFeMoNi multiprincipal element alloy. In Proceedings EuroPM 2017 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/49914 ( reposiTUm)

de Oro Calderon, R., Dunkley, J. J., Gierl-Mayer, C., & Danninger, H. (2017). Mechanical Performance of Sintered Steels Containing Fine Masteralloy Powders Produced with a Novel Atomization Technique: “Ultra High Pressure Water Atomization.” In Proceedings EuroPM 2017 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/49919 ( reposiTUm)

Mitterlehner, M., Danninger, H., Gierl-Mayer, C., Wallner, S., & Leitner, H. (2017). Study on the Flowability of Gas Atomized High Alloy Powders for Additive Manufacturing. In Proceedings EuroPM 2017 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/49935 ( reposiTUm)

Danninger, H., & Gierl-Mayer, C. (2016). Oxygen transfer in Cr prealloyed PM steels through intermediate anneal before sintering. In Proceedings WorldPM2016 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/49381 ( reposiTUm)

Gierl-Mayer, C., Neuwirth, E., Müllner, M., Reifeltshammer, J., Rauscher, F., & Werner, A. (2016). Hydrogen Storage Alloy As Material Compound In Practice. In Developing the Powder Metallurgy Future (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/49395 ( reposiTUm)

Danninger, H., Oro Calderon, R., & Gierl-Mayer, C. (2016). Oxygen Transfer Reactions During Sintering of Ferrous Powder Compacts. In M. Ciobanu, I.-G. Bucse, & C. Nicolicescu (Eds.), ADEM 2016, Conference Book of Abstracts (pp. 1–2). Editura Universitaria. http://hdl.handle.net/20.500.12708/49740 ( reposiTUm)

Momeni, M., Danninger, H., & Gierl-Mayer, C. (2016). Study of the sintering process of two Cr-Mo prealloyed steels by thermal and chemical analysis. In Proceedings WorldPM2016 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/49382 ( reposiTUm)

Huemer, M.-C., Gierl-Mayer, C., Danninger, H., Dlapka, M., Stetina, G., & Ratzi, R. (2016). Supersolidus Sintering of Cr Prealloyed Steels by Conventional and Inductive Heating. In Proceedings WorldPM2016 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/49384 ( reposiTUm)

Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2016). Formation of Carbide Shells and Cavities from Cr Particles During Sintering of Mixed Fe-Cr-C Steels. In Proceedings WorldPM2016 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/49385 ( reposiTUm)

Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2016). Tailored Liquid-Phase Properties through the Use of Master Alloys: Microstructural Homogeneity vs. Dimensional Stability of Sintered Steels. In Advances in Powder Metallurgy & Particulate Materials-2016 (pp. 322–332). Advances in Powder Metallurgy & Particulate Materials-2016. http://hdl.handle.net/20.500.12708/49463 ( reposiTUm)

Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2016). Effects of H2 Atmospheres on Sintering of Steels Containing Oxidation Sensitive Elements Introduced Through the Master Alloy Route. In Advances in Powder Metallurgy & Particulate Materials-2016 (pp. 280–291). Advances in Powder Metallurgy & Particulate Materials-2016. http://hdl.handle.net/20.500.12708/49464 ( reposiTUm)

Oro Calderon, R., Bonta, M., Limbeck, A., Gierl-Mayer, C., & Danninger, H. (2016). Microstructure Development During Liquid Phase Sintering Studied Using Laser Ablation Inductively Coupled Plasma Mass Spectrometry (LA-ICP-MS). In Proceedings WorldPM2016 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/49387 ( reposiTUm)

Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2016). Dimensional Stability of Sintered Steels Containing Low Melting Point Master Alloys. In Proceedings WorldPM2016 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/49386 ( reposiTUm)

Gierl-Mayer, C., Danninger, H., & de Oro Calderon, R. (2016). Methane Formation During Sintering Of PM Steels Alloyed With Chromium And/or Manganese. In Developing the Powder Metallurgy Future (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/49394 ( reposiTUm)

Bonta, M., Oro Calderon, R., Gierl-Mayer, C., Danninger, H., & Limbeck, A. (2016). Laterally resolved analysis of steels using LIBS: Revealing the distribution of metallic and non-metallic additions. In Final Program (p. 54). http://hdl.handle.net/20.500.12708/49519 ( reposiTUm)

Limbeck, A., Bauer, V., Gierl-Mayer, C., & Danninger, H. (2015). Quantitative Analyse von Bor in PM-Stählen mittels LA-ICP-MS. In Kurzfassungen (p. 52). http://hdl.handle.net/20.500.12708/49199 ( reposiTUm)

Deutsch, M., Fellner, T., Widhalm, J., Aumeyr, C., Jordan, C., Werner, A., Weinberger, P., Gierl-Mayer, C., & Winter, F. (2015). MgO/Mg(OH)2 as a Possible Thermochemical Energy Storage Material. In Proceedings of the 9#^{th} International Conference for Young Researchers and PhD Students (p. 5). http://hdl.handle.net/20.500.12708/48942 ( reposiTUm)

de Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2015). The Challenge of Sintering Steels with New Alloying Compositions. In R. de Oro Calderon (Ed.), Proceedings Euro PM 2015 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/48969 ( reposiTUm)

de Oro Calderon, R., Bernardo Quejido, E., Campos Gomez, M., Gierl-Mayer, C., Danninger, H., & Torralba, J. M. (2015). Tailoring Master Alloys for Liquid Phase Sintering: Effect of Introducing Oxidation-Sensitive Elements. In Proceedings Euro PM 2015 (p. 12). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/48968 ( reposiTUm)

Mohammadzadeh, A., Azadbeh, M., Danninger, H., & Gierl-Mayer, C. (2015). Effect of Sintering Parameters on Zinc Loss in Prealloyed Alpha Brass Powder Compacts. In Proceedings Euro PM 2015 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/48967 ( reposiTUm)

Kuzmanovic, J., Danninger, H., Gierl-Mayer, C., Nenning, A., & Avakemian, A. (2015). Interstitial Effects during Sintering of Injection Moulded Al Base Alloys. In Proceedings Euro PM 2015 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/48970 ( reposiTUm)

Gierl-Mayer, C., Stepan, T., Sun, J., & Danninger, H. (2015). Reduction of Oxidised Steel Compacts during the Sintering Process. In Proceedings Euro PM 2015 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/48971 ( reposiTUm)

Gschiel, H., Gierl-Mayer, C., Danninger, H., Larsson, P.-O., & Vidarsson, H. (2014). Manufacturing and Microstructure of Porous Metal Supports for a Solid Oxide Fuel Cell. In Proceedings Euro PM2014 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/48655 ( reposiTUm)

Danninger, H., Avakemian, A., Gierl-Mayer, C., Dlapka, M., & Grafinger, M. (2014). Methane formation through substrate-atmosphere interaction during sintering of Si containing steels. In Proceedings Euro PM2014 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/48654 ( reposiTUm)

Gierl-Mayer, C., Zbiral, J., Danninger, H., & Ratzi, R. (2014). Enhanced Sintering of PM Steels by Addition of Fe-Ni-B Masteralloy. In Proceedings Euro PM2014 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/48656 ( reposiTUm)

Azadbeh, M., Danninger, H., Mohammadzadeh, A., & Gierl-Mayer, C. (2014). Effect of Green Density on Fragmentation-Rearrangement in Supersolidus Liquid Phase Sintering of Prealloyed Brass Powder. In Proceedings Euro PM2014 (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/48657 ( reposiTUm)

Kuzmanovic, J., Danninger, H., Gierl-Mayer, C., & Nenning, A. (2014). Pulverspritzguss von Aluminumlegierungen - die Chemie als entscheidender Faktor. In C. C. Chimani, A. Kraly, & P. J. Uggowitzer (Eds.), Leichtmetalle-Prozesse-Anwendungen: Zukunftstechnologien als Basis für neue Mobilitätskonzepte (pp. 88–100). LKR Leichtmetallkompetenzzentrum Ranshofen GmbH. http://hdl.handle.net/20.500.12708/48689 ( reposiTUm)

Gschiel, H., Gierl-Mayer, C., & Danninger, H. (2014). Production and analysis of porous metal supports for a solid oxide fuel cell. In S. Mayer, M. Panzenböck, & H. Clemens (Eds.), Sonderbände der Praktischen Metallographie 46: Fortschritte in der Metallographie (pp. 157–162). DGM-Inventum. http://hdl.handle.net/20.500.12708/48690 ( reposiTUm)

Huemer, M.-C., Gierl-Mayer, C., & Danninger, H. (2014). Reaction of boron and manganese from compacts with sintering furnace linings through the gas phase. In R. A. Chernenkoff & W. B. James (Eds.), PM2014 Manuscript Preprints (p. 11). Metal Powder Industries Federation. http://hdl.handle.net/20.500.12708/48547 ( reposiTUm)

Bonta, M., Gierl-Mayer, C., Danninger, H., & Limbeck, A. (2014). Revealing the distribution of non-mteallic additions in steel samples using LA-ICP-MS. In 2014 Winter Conference Program and Abstracts (p. 140). http://hdl.handle.net/20.500.12708/48712 ( reposiTUm)

Dadal, E., Gierl, C., Danninger, H., Sencekova, L., Izdinsky, K., & Simancik, F. (2013). Manufacturing of Mo preforms with defined porosity for subsequent reactive infiltration. In H. Kestler & L. Sigl (Eds.), Proceedings 18. Plansee Seminar 2013 (p. 10). Plansee SE. http://hdl.handle.net/20.500.12708/48173 ( reposiTUm)

Hradil, K., Avakemian, A., Dlapka, M., Gierl, C., & Danninger, H. (2013). Röntgenographische Analyse von Restaustenit-Gehalten an pulvermetallurgisch hergestellten Stählen. In R. Schneider (Ed.), Tagungsband Härtereitagung 2013 (pp. 68–74). ASMET. http://hdl.handle.net/20.500.12708/48118 ( reposiTUm)

Dlapka, M., Gierl, C., Strobl, S., & Danninger, H. (2013). Austenitkornstabilität in Sinterstählen bei hohen Temperaturen. In R. Schneider (Ed.), Tagungsband Härtereitagung 2013 (pp. 44–49). ASMET. http://hdl.handle.net/20.500.12708/48117 ( reposiTUm)

Klammer, E., Dlapka, M., Gierl, C., & Danninger, H. (2013). Trockenlauf-Gleitverschleiß von sintergehärteten Stählen für Getriebekomponenten. In R. Schneider (Ed.), Tagungsband Härtereitagung 2013 (pp. 75–80). ASMET. http://hdl.handle.net/20.500.12708/48119 ( reposiTUm)

Gierl, C., Gschiel, H., Englerth, E., & Danninger, H. (2013). Introduction of carbon into sintered steels through different masteralloy routes. In H. Miura & A. Kawasaki (Eds.), Proceedings of the 2012 Powder Metallurgy World Congress & Exhibition (p. 7). Japan Society of Powder and Powder Metallurgy. http://hdl.handle.net/20.500.12708/46016 ( reposiTUm)

Gierl, C., & Danninger, H. (2013). Reduction effects during sintering of Cr and Mn alloyed steel compacts. In H. Miura & A. Kawasaki (Eds.), Proceedings of the 2012 Powder Metallurgy World Congress & Exhibition (p. 7). Japan Society of Powder and Powder Metallurgy. http://hdl.handle.net/20.500.12708/47994 ( reposiTUm)

Putz, B., Bonta, M., Gierl-Mayer, C., Danninger, H., & Limbeck, A. (2013). LA-ICP-MS imaging of the distribution of non-metallic additives in powder metallurgic steel samples. In Book of Abstracts (p. 1). http://hdl.handle.net/20.500.12708/48380 ( reposiTUm)

Dadal, E., Gierl-Mayer, C., Danninger, H., Sencekova, L., Izdinsky, K., & Simancik, F. (2013). Manufacturing of Si infiltrable PM molybdenum preforms with varying porosity characteristics. In Proceedings Euro PM2013 (pp. 369–374). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/48234 ( reposiTUm)

Azadbeh, M., Danninger, H., & Gierl-Mayer, C. (2013). Macroscopic illustration of Zn evaporation during liquid phase sintering of Cu-28Zn prepared from prealloyed powder. In Proceedings Euro PM2013 (pp. 381–386). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/48235 ( reposiTUm)

Bernardo Quejido, E., Campos Gomez, M., Torralba, J. M., Gierl-Mayer, C., Danninger, H., & Frykholm, R. (2013). Lean steels modified with a new Cu base master alloy: Influence of process parameters in dimensional and sintering behaviour. In Proceedings Euro PM2013 (pp. 319–324). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/46169 ( reposiTUm)

Gierl-Mayer, C., Momeni, M., Danninger, H., & Iovea, M. (2013). Production of ferrous PM-parts for calibration and demonstration of typical defect detection performance of in-line X-ray digital radiography equipment. In Proceedings Euro PM2013 (pp. 169–174). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/46290 ( reposiTUm)

de Oro Calderon, R., Campos Gomez, M., Gierl-Mayer, C., Danninger, H., & Torralba, J. M. (2013). Introduction of oxidation-sensitive elements in low alloyed steels using the master alloy route: Key aspects for success. In Proceedings Euro PM2013 (pp. 337–342). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/46202 ( reposiTUm)

Gierl-Mayer, C., Klammer, E., Danninger, H., & Dlapka, M. (2013). Wear mechanisms occurring in dry sliding of sinter hardened alloy steels against bearing steel. In Proceedings Euro PM2013 (pp. 397–402). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/46162 ( reposiTUm)

Edtmaier, C., Schubert, W.-D., Gierl, C., Pilz, L., Plankensteiner, A., & Huber, K. (2013). Pre-sintering behaviour of Mo-powders. In 18. Plansee-Seminar 2013 (p. 11). Plansee Group, Reutte, Austria. http://hdl.handle.net/20.500.12708/48135 ( reposiTUm)

Wetzel, M., Wawrzik, S., Buchegger, C., Gierl, C., & Lengauer, W. (2012). Interaction of nitrogen with WC and nitrogen-assisted sintering of hardmetals. In Proceedings Euro PM2012 (Issue Session 3). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/164846 ( reposiTUm)

Azadbeh, M., Danninger, H., & Gierl, C. (2012). Comparing Particle Rearrangement During Liquid Phase Sintering of Cu-20Zn and Cu-10Sn-10Pb Prepared from Prealloyed Powder. In Proceedings Euro PM2012 Vol.1 (pp. 175–180). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/47885 ( reposiTUm)

Kuzmanovic, J., Danninger, H., Gierl, C., Zbiral, J., & Zikin, A. (2012). Sintering of Fe and Ni based MMCs reinforced with fused tungsten carbide particles. In Proceedings Euro PM2012 Vol.2 (pp. 57–62). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/47886 ( reposiTUm)

Dlapka, M., Danninger, H., Gierl, C., Altena, H., Stetina, G., & Orth, P. (2011). Low pressure carburization of chromium containing sintered steels for gear applications. In R. Schneider (Ed.), Proceedings Euro HT 2011 (p. 10). ASMET. http://hdl.handle.net/20.500.12708/47289 ( reposiTUm)

Dlapka, M., Danninger, H., Gierl, C., & Lindqvist, B. (2011). Siner hardening - a special heat treatment for powder metallurgy precision parts. In R. Schneider (Ed.), Proceedings Euro HT 2011 (p. 10). ASMET. http://hdl.handle.net/20.500.12708/47290 ( reposiTUm)

Kuzmanovic, J., Zikin, A., Gierl, C., & Danninger, H. (2011). Verschleißfeste Eisen- und Nickel-Basis-Legierungen verstärkt mit WC-W²C. In Tribologie in Industrie und Forschung, Werkstoff- und Energieeffizienz - Herausforderung und Lösungsansätze (p. 203). http://hdl.handle.net/20.500.12708/48112 ( reposiTUm)

Gierl, C., Danninger, H., & de Oro Calderon, R. (2011). Charakterisierung von Sintervorgängen in Eisenbasis-Pulverpresslingen mittels Prozessanalytik durch thermische Analysenmethoden. In H. Kolaska (Ed.), Pulvermetallurgie in Wissenschaft und Praxis Band 27: Sintern - der zentrale Prozess der Pulvermetallurgie (pp. 215–236). Fachverband Pulvermetallurgie. http://hdl.handle.net/20.500.12708/47527 ( reposiTUm)

Dlapka, M., Danninger, H., Gierl, C., Weiss, B., Khatibi, G., & Betzwar-Kotas, A. (2011). Gigacycle fatigue of different low alloyed PM steels for sinter hardening. In Proceedings EuroPM2011 Volume 1 (pp. 3–8). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/47434 ( reposiTUm)

Danninger, H., Gierl, C., & Mitrovic, N. (2011). Magnetic and mechanical properties of sintered Fe-Co-Mo/W precipitation hardened alloys. In Proceedings Euro PM2011 Volume 1 (pp. 279–284). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/47435 ( reposiTUm)

Gierl, C., Molnar, W., & Danninger, H. (2011). Correlations between microstructure, mechanical properties and sintering parameters for PM steels. In Proceedings Euro PM2011 Volume 1 (pp. 61–67). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/47436 ( reposiTUm)

Azadbeh, M., Danninger, H., & Gierl, C. (2011). Evolution of properties and graded densification during sintering of Cu-20Zn prepared from prealloyed powder. In Proceedings Euro PM2011 Volume 3 (pp. 99–104). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/47437 ( reposiTUm)

Danninger, H., Gierl, C., Gschiel, H., Dlapka, M., & Hemmatpour, Y. (2011). Iron-carbon masteralloy - a promising approach for introducing carbon into high density sintered steels. In I. E. Anderson & T. W. Pelletiers (Eds.), Preprints PowderMet2011 (p. 11). Metal Powder Industries Federation. http://hdl.handle.net/20.500.12708/47359 ( reposiTUm)

Dlapka, M., Danninger, H., & Gierl, C. (2011). Factors influencing the austenite grain size in sinter hardened low Cr-Mo alloyed PM steels. In I. E. Anderson & T. W. Pelletiers (Eds.), Preprints PowderMet2011 (p. 15). Metal Powder Industries Federation. http://hdl.handle.net/20.500.12708/47360 ( reposiTUm)

de Oro Calderon, R., Campos Gomez, M., Gierl, C., Danninger, H., & Torralba, J. M. (2010). Atmosphere effects on liquid phase sintering of PM steels modified with master alloy additions. In Proceedings PM2010 Volume 2 (pp. 275–282). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/46937 ( reposiTUm)

Dlapka, M., Gierl, C., Danninger, H., Altena, H., Stetina, G., & Orth, P. (2010). Porosity effects in low pressure carburizing of sintered steels. In Proceedings PM2010 Volume 2 (pp. 459–466). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/46938 ( reposiTUm)

Hryha, E., Nyborg, L., Gierl, C., Danninger, H., & Bengtsson, S. (2010). Surface analysis of prealloyed steel powders: Qualitative and quantitative aspects. In Proceedings PM2010 Volume 1 (pp. 25–32). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/46939 ( reposiTUm)

Gierl, C., Danninger, H., Silva Gonzalez, M., Schmidt, J., & Specht, E. (2010). Thermophysical properties of sintered steels - effect of porosity and composition. In Proceedings PM2010 Volume 5 (pp. 41–50). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/46955 ( reposiTUm)

Zlatkov, B. S., ter Maat, J., Nikolic, M. V., Bavdek, U., Gierl, C., Danninger, H., & Aleksic, O. S. (2010). Parallel anaylsis of axial pressing, casting and PIM as routes for production of Alnico8. In Proceedings PM2010 Volume 4 (pp. 421–428). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/46941 ( reposiTUm)

Ul Mohsin, I., Lager, D., Hohenauer, W., Gierl, C., & Danninger, H. (2010). Numerical and experimental investigation of backbone binder removal from MIM copper parts. In Proceedings PM2010 Volume 4 (pp. 661–668). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/46943 ( reposiTUm)

Dlapka, M., Gierl, C., Danninger, H., Bengtsson, S., & Dudrova, E. (2010). Nitrogen pickup during sintering and subsequent cooling of chromium alloyed PM steels. In Proceedings PM2010 Volume 2 (pp. 13–20). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/46936 ( reposiTUm)

Danninger, H., Jaliliziyaeian, M., Gierl, C., Hryha, E., & Bengtsson, S. (2010). Sintered steels prealloyed with manganese - chances and risks. In Proceedings PM2010 Volume 3 (pp. 3–10). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/46940 ( reposiTUm)

Danninger, H., Gierl, C., Silva Gonzalez, M., Schmidt, J., & Specht, E. (2010). Thermal expansion and thermal conductivity of sintered steels - the real effect of the porosity. In Preprints (p. 11). Metal Powder Industries Federation. http://hdl.handle.net/20.500.12708/46956 ( reposiTUm)

Ul Mohsin, I., Lager, D., Gierl, C., Hohenauer, W., & Danninger, H. (2010). Process optimization for sintering of metal injection molded copper through advanced kinetics analysis. In M. Bulger & B. Stebick (Eds.), Advances in Powder Metallurgy & Particulate Materials - 2010 (p. 9). Metal Powder Industries Federation. http://hdl.handle.net/20.500.12708/47065 ( reposiTUm)

Hashiya, M., Kubo, Y., Gierl, C., & Schubert, W.-D. (2009). The Influence of Carbon Content and Additions of Growth Inhibitors (V,Cr) on the Formation of Melt in WC-Co and WC-Ni Alloys. In 17 Plansee Seminar 2009 (p. HM 55/1-HM 55/17). Plansee Group, Reutte, Austria. http://hdl.handle.net/20.500.12708/46724 ( reposiTUm)

Azadbeh, M., Danninger, H., & Gierl, C. (2009). Correlation between dynamic elastic modulus, electrical conductivity and sintered density of low alloyed Cr-Mo sintered steels. In T. J. Jesberger & S. J. Mashl (Eds.), Advances in Powder Metallurgy & Particulate Materials - 2009 (p. 8). Metal Powder Industries Federation. http://hdl.handle.net/20.500.12708/46486 ( reposiTUm)

Gierl, C., & Danninger, H. (2009). Chemical reactions during sintering of Cr-Mo prealloyed powder compacts in inert and reducing atmospheres. In T. J. Jesberger & S. J. Mashl (Eds.), Advances in Powder Metallurgy & Particulate Materials - 2009 (p. 12). Metal Powder Industries Federation. http://hdl.handle.net/20.500.12708/46485 ( reposiTUm)

Ul Mohsin, I., Lager, D., Danninger, H., Hohenauer, W., & Gierl, C. (2009). Modelling of the thermal debinding behaviour of copper MIM parts using thermo-kinetic analysis. In Euro PM2009 CD Proceedings (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/46544 ( reposiTUm)

Momeni, M., Gierl, C., & Danninger, H. (2009). Electrical conductivity and microstructural changes of sintered plain carbon steels prepared from different base powders. In Euro PM2009 CD Proceedings (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/46545 ( reposiTUm)

Gierl, C., Jaliliziyaeian, M., Danninger, H., & Bengtsson, S. (2009). Dilatometry of PM carbon steels in different atmospheres - deoxidation effects. In Euro PM2009 CD Proceedings (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/46546 ( reposiTUm)

Dlapka, M., Danninger, H., Gierl, C., & Lindqvist, B. (2009). Investigation of the transition between open and closed porosity for different iron based PM materials. In Euro PM2009 CD Proceedings (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/46547 ( reposiTUm)

Danninger, H., Vassileva, V., & Gierl, C. (2009). Atmosphere effects on sintering of carbon-free powder compacts from different ferrous powders. In CD Proceedings (p. 6). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/46543 ( reposiTUm)

Harrer, B., Gierl, C., Danninger, H., Kastner, J., & Schneider, R. (2008). Röntgen-Computertomographie zur Quantifizierung von Porenstrukturen in Sintereisen. In R. Schneider (Ed.), Tagungsband Welser Werkstoffkolloquium 2008 (pp. 27–32). http://hdl.handle.net/20.500.12708/46071 ( reposiTUm)

Danninger, H., Gierl, C., Vassileva, V., Liersch, A., & Kalss, G. (2008). Reaction of nitrogen atmospheres with PM steel compacts during sintering. In R. Lawcock, A. Lawley, & P. J. McGeehan (Eds.), Advances in Powder Metallurgy & Particulate Materials - 2008 (p. 9). Metal Powder Industries Federation. http://hdl.handle.net/20.500.12708/46218 ( reposiTUm)

Jaliliziyaeian, M., Gierl, C., & Danninger, H. (2008). Effect of prealloyed Mn and Cr on chemical reactions during sintering of steel compacts. In R. Lawcock, A. Lawley, & P. J. McGeehan (Eds.), Advances in Powder Metallurgy & Particulate Materials - 2008 (p. 7). Metal Powder Industries Federation. http://hdl.handle.net/20.500.12708/46219 ( reposiTUm)

Dlapka, M., Gierl, C., Danninger, H., Altena, H., & Orth, P. (2008). Studie zur Niederdruckaufkohlung von Sinterformteilen variabler Porosität. In R. Schneider (Ed.), Tagungsunterlagen Härtereitagung 2008 (pp. 3–7). http://hdl.handle.net/20.500.12708/46230 ( reposiTUm)

Danninger, H., Gierl, C., Momeni, M., & Salak, A. (2008). Relationship between tensile strength and hardness in various grades of sintered iron and steels. In Proceedings Vol.3 (pp. 127–132). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/46159 ( reposiTUm)

Jaliliziyaeian, M., Gierl, C., Zbiral, J., & Danninger, H. (2008). Manganese evaporation during sintering of Fe-Mn-Cr compacts from prealloyed iron powders. In Proceedings EuroPM2008 Vol.1 (pp. 115–120). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/46155 ( reposiTUm)

Sohar, C., Betzwar-Kotas, A., Gierl, C., Weiss, B., & Danninger, H. (2008). Fatigue behaviour of PM tool steels in the gigacycle regime. In Proceedings EuroPM2008, Vol.1 (pp. 219–224). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/46156 ( reposiTUm)

Gierl, C., Jaliliziyaeian, M., Danninger, H., Vasilko, K., & Salak, A. (2008). Comparison of CaS and MnS as machining aids for PM steels. In Proceedings Vol.3 (pp. 235–241). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/46158 ( reposiTUm)

Gierl, C., Tükör, Z., & Danninger, H. (2008). Sintering of chemically heterogeneous P/M steels prepared from base powder blends. In A. Arvand & H. Danninger (Eds.), Proceedings PM Auto ’08 (p. 8). Mashad Powder Metallurgy Co. http://hdl.handle.net/20.500.12708/46040 ( reposiTUm)

Strobl, S., Wagesreither, J., Gierl, C., Kupkova, M., Kupka, M., & Cerny, M. (2008). Mechanical Properties of PM Copper Alloyed Iron Parts with Microgradient Structure. In A. Arvand & H. Danninger (Eds.), Proceedings PM Auto ’08 (p. 10). Mashad Powder Metallurgy Co. http://hdl.handle.net/20.500.12708/46038 ( reposiTUm)

Sameie, S., Gierl, C., & Danninger, H. (2008). Modification of Catalytically-Debinded Feedstock for Powder Injection Molding. In A. Arvand & H. Danninger (Eds.), Proceedings PM Auto ’08 (p. 11). Mashad Powder Metallurgy Co. http://hdl.handle.net/20.500.12708/46037 ( reposiTUm)

Jaliliziyaeian, M., Gierl, C., & Danninger, H. (2008). Influence of Manganese on the Sintering Behavior of Atomized Iron Powder. In A. Arvand & H. Danninger (Eds.), Proceedings PM Auto ’08 (p. 9). Mashad Powder Metallurgy Co. http://hdl.handle.net/20.500.12708/46036 ( reposiTUm)

Danninger, H., & Gierl, C. (2008). Strategies for manufacturing of highly loaded PM precision parts. In A. Arvand & H. Danninger (Eds.), Proceedings PM Auto ’08 (p. 10). Mashad Powder Metallurgy Co. http://hdl.handle.net/20.500.12708/46035 ( reposiTUm)

Sohar, C., Betzwar-Kotas, A., Gierl, C., Weiss, B., & Danninger, H. (2008). Fatigue behaviour of high-chromium alloyed cold work tool steel in the gigacycle fatigue regime. In J. Pokluda, P. Lukas, P. Sandera, & I. Dlouhy (Eds.), ECF17 - 17th European Conference on Fracture - Book of Abstracts & Proceedings on CD-ROM (p. 8). VUTIUM. http://hdl.handle.net/20.500.12708/46289 ( reposiTUm)

Sohar, C., Betzwar-Kotas, A., Gierl, C., Weiss, B., & Danninger, H. (2008). Fractographic evaluation of gigacycle fatigue failure of a high Cr alloyed cold work tool steel. In V. Leskovsek, B. Smoljan, H. Jäger, & M. Jenko (Eds.), Materials and Technology - Special Isseu (pp. 104–105). http://hdl.handle.net/20.500.12708/46047 ( reposiTUm)

Sohar, C., Betzwar-Kotas, A., Gierl, C., Weiss, B., & Danninger, H. (2008). Anisotropy effects on gigacycle fatigue behavior of 12% chromium alloyed cold work tool steel. In V. Leskovsek, B. Smoljan, H. Jäger, & M. Jenko (Eds.), Materials and Technology - Special Issue (pp. 106–107). http://hdl.handle.net/20.500.12708/46046 ( reposiTUm)

Gierl, C., Azadbeh, M., & Danninger, H. (2007). Experimental procedures for measuring the static and dynamic Young’s moduli of sintered steels. In Proceedings Euro PM2007 (pp. 149–154). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/45830 ( reposiTUm)

Jaliliziyaeian, M., Gierl, C., & Danninger, H. (2007). Effect of sintering atmosphere and alloy elements on the ferrite-austenite transformation of iron compacts. In Proceedings Euro PM2007 (pp. 131–136). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/45831 ( reposiTUm)

Vassileva, V., Danninger, H., Strobl, S., & Gierl, C. (2007). Atmosphere effects on sintering of ferrous powder compacts containing boron. In Proceedings Euro PM2007 (pp. 53–58). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/45829 ( reposiTUm)

Danninger, H., Xu, C., & Gierl, C. (2007). Process-temperature control rings as a tool for characterization of the sintering process. In Proceedings Euro PM2007 (pp. 181–186). European Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/45828 ( reposiTUm)

Sohar, C., Betzwar-Kotas, A., Gierl, C., Weiss, B., & Danninger, H. (2007). Location of crack initiation in the gigacycle fatigue regime for high chromium alloyed cold work tool steel. In Proceedings (p. 227). Ruhr-Universität. http://hdl.handle.net/20.500.12708/45857 ( reposiTUm)

Betzwar-Kotas, A., Sohar, C., Gierl, C., Weiss, B., & Danninger, H. (2006). Gigacycle fatigue fractography of high Cr alloyed cold work tool steel. In L. Parilak (Ed.), Proceedings Fraktografia / Fractography 2006 (pp. 181–188). Slovak Academy of Sciences. http://hdl.handle.net/20.500.12708/45514 ( reposiTUm)

Sohar, C., Betzwar-Kotas, A., Gierl, C., Weiss, B., & Danninger, H. (2006). Gigacycle fatigue fractography of high Cr alloyed cold work tool steel. In A. Kneissl (Ed.), Fortschritte in der Metallographie (pp. 339–346). Werkstoff-Informationsgesellschaft. http://hdl.handle.net/20.500.12708/45491 ( reposiTUm)

Stetina, G., Kalss, G., Gierl, C., Danninger, H., & Orth, P. (2006). Establishing CCT diagrams for sinter hardening grade Cr-Mo prealloyed steels. In K. Y. Eun & Y.-S. Kim (Eds.), Extended Abstracts of 2006 Powder Metallurgy World Congress (pp. 836–837). Korean Powder Metallurgy Institute. http://hdl.handle.net/20.500.12708/45496 ( reposiTUm)

Kalss, G., Danninger, H., Gierl, C., Stetina, G., & Orth, P. (2006). Quantification of Porosity of a Powder Metallurgical Steel by Image Analysis. In A. Kneissl (Ed.), Fortschritte in der Metallographie (pp. 105–112). Werkstoff-Informationsgesellschaft. http://hdl.handle.net/20.500.12708/45490 ( reposiTUm)

Strobl, S., Gierl, C., Konegger, T., Kupkova, M., & Kabatova, M. (2006). Microgradient structures of copper-coated and sintered Fe and Cr-Mo-steel powders. In L. Parilak (Ed.), Proceedings Fraktografia / Fractography 2006 (pp. 460–464). Slovak Academy of Sciences. http://hdl.handle.net/20.500.12708/45515 ( reposiTUm)

Gierl, C., Rouzbahani, F., Harold, C., Danninger, H., Ponemayr, H., & Daxelmüller, M. (2006). Heat treatment and microstructure of carbon-free precipitation hardened PM tool steel Fe-Co-Mo/W. In R. Schneider (Ed.), Proceedings 15th IFHTSE (pp. 106–111). ASMET. http://hdl.handle.net/20.500.12708/45540 ( reposiTUm)

Danninger, H., Gierl, C., & Vassileva, V. (2005). Asymmetry Effects in Ferrite-Austenite Transformation During Sintering of Carbon-Free Ferrous Alloys. In Proceedings EuroPM2005 (pp. 15–20). EPMA, Shrewsbury UK. http://hdl.handle.net/20.500.12708/45229 ( reposiTUm)

Gierl, C., & Danninger, H. (2005). Thermal Analysis of Plain Iron - The Effect of “Inert” Atmospheres. In Proceedings EuroPM2005 (pp. 3–8). EPMA, Shrewsbury UK. http://hdl.handle.net/20.500.12708/45231 ( reposiTUm)

Gierl, C., & Danninger, H. (2005). Formation of secondary cementite in sintered steels. In L. Parilak & H. Danninger (Eds.), Proceedings DFPM2005 (pp. 44–51). Slovak Academy of Sciences. http://hdl.handle.net/20.500.12708/45203 ( reposiTUm)

Azadbeh, M., Gierl, C., & Danninger, H. (2005). Influence of the Heat Treatment on Microstructure and Bending Strength of Cr Prealloyed PM Steels. In S. Saritas, M. Türker, & H. Arik (Eds.), Proceedings 4th Int. PM Conference (p. 11). Turkish Powder Metallurgy Association. http://hdl.handle.net/20.500.12708/45427 ( reposiTUm)

Beiträge in Büchern

de Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2021). Fundamentals of Sintering: Liquid Phase Sintering. In Encyclopedia of Materials: Metals and Alloys (pp. 481–492). Elsevier Inc. https://doi.org/10.1016/b978-0-12-819726-4.00127-7 ( reposiTUm)

Danninger, H., Calderon, R. de O., & Gierl-Mayer, C. (2017). Powder Metallurgy and Sintered Materials. In Ullmann’s Encyclopedia of Industrial Chemistry (pp. 1–57). Wiley-VCH. http://hdl.handle.net/20.500.12708/29529 ( reposiTUm)

Danninger, H., Gierl-mayer, C., & Strobl, S. (2013). Evolution of microstructure in ferrous and non-ferrous materials. In I. Chang & Y. Zhao (Eds.), Advances in Powder Metallurgy (pp. 308–357). Woodhead Publishing Ltd. https://doi.org/10.1533/9780857098900.2.308 ( reposiTUm)

Danninger, H., & Gierl-Mayer, C. (2013). Advanced powder metallurgy steel alloys. In I. Chang & Y. Zhao (Eds.), Advances in Powder Metallurgy (pp. 149–201). Woodhead Publishing Ltd. https://doi.org/10.1533/9780857098900.2.149 ( reposiTUm)

Gierl, C., & Danninger, H. (2010). Eisenpulvermetallurgie. In J. Kriegesmann (Ed.), Technische Keramische Werkstoffe - 116. Ergänzungslieferung (pp. 1–62). HvB Verlag. http://hdl.handle.net/20.500.12708/26843 ( reposiTUm)

Präsentationen

Holzer, A., Pfeiffenberger, S., Anand, A., & Gierl-Mayer, C. (2025, September 14). Different Debinding Strategies For Lithography-Based Additive Manufacturing Of Stainless Steel [Conference Presentation]. Euro PM2025 Congress and Exhibition, Glasgow, United Kingdom of Great Britain and Northern Ireland (the). http://hdl.handle.net/20.500.12708/224103 ( reposiTUm)

Nahringbauer, P., Rauchenwald, E., Ouda, K., Vogler, C., Holzer, A., & Gierl-Mayer, C. (2025, November 27). Metall trifft Schall: Weichmagnetische Pulverherstellung durch Ultraschallverdüsung [Poster Presentation]. Hagener Symposium 2025 „Pulver │ Metallurgie │Zukunft“, Hagen, Germany. http://hdl.handle.net/20.500.12708/224111 ( reposiTUm)

Anand, A., Gierl-Mayer, C., Peritsch, P., Cano Cano, S., Holzer, A., & Harakaly, G. (2025, September 14). Post-processing Strategies For Copper Parts Produced By Lithography-Based Metal Manufacturing [Poster Presentation]. Euro PM2025 Congress and Exhibition, Glasgow, United Kingdom of Great Britain and Northern Ireland (the). http://hdl.handle.net/20.500.12708/224105 ( reposiTUm)

Hojati, M., Gierl-Mayer, C., & Danninger, H. (2024). Introduction Of Carbon Into Sintered Steels By Combining Graphite And Fe-C Masteral-loys [Conference Presentation]. Euro PM2024 Congress and Exhibition, Malmö, Sweden. https://doi.org/10.59499/EP246206688 ( reposiTUm)

Holzer, A., Nahringbauer, P., Stark, L., & Gierl Mayer, C. (2024, October 2). Small Batch Powder Production For Additive Manufacturing By Ultrasonic Atomization [Conference Presentation]. Euro PM2024 Congress and Exhibition, Malmö, Sweden. https://doi.org/10.59499/EP246279391 ( reposiTUm)

Nahringbauer, P., Holzer, A., Rauchenwald, E., Vogler, C., & Gierl-Mayer, C. (2024, October 2). Ultrasonic Atomization Of Soft Magnetic Fe-Based Alloys [Conference Presentation]. Euro PM2024 Congress and Exhibition, Malmö, Sweden. https://doi.org/10.59499/EP246282701 ( reposiTUm)

Mohan, V., Gierl-Mayer, C., Rauchenwald, E., & Vogler, C. (2024, September 30). Oxidation in Fe-based SMC Powders [Poster Presentation]. Euro PM2024 Congress and Exhibition, Malmö, Sweden. https://doi.org/10.59499/EP246284004 ( reposiTUm)

Gierl-Mayer, C., & Danninger, H. (2024, October 2). Chromium And Tungsten Sulfides As Machining Aids In PM Steel [Conference Presentation]. Euro PM2024 Congress and Exhibition, Malmö, Sweden. https://doi.org/10.59499/EP246281579 ( reposiTUm)

Holzer, A., Nahringbauer, P., Stark Lukas, Pfeiffenberger, S., & Gierl-Mayer, C. (2024). Additive Fertigung: Vom Pulver bis zum Bauteil [Poster Presentation]. Hagener Symposium 2024, Hagen, Germany. http://hdl.handle.net/20.500.12708/207975 ( reposiTUm)

Cano Cano, S., Peritsch, P., Bosters, J., Anand, A., Gierl-Mayer, C., & Attila Harakály, G. (2024, September 30). Recent advances of Lithography-based Metal Manufacturing of copper [Conference Presentation]. Euro PM2024 Congress and Exhibition, Malmö, Sweden. http://hdl.handle.net/20.500.12708/208015 ( reposiTUm)

Geroldinger, S., Hellein, R., Hojati, M., De Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2023, December 1). Rohstoffeffiziente Sinterstähle durch Hybrid-Masteralloylegierungstechnik [Conference Presentation]. 41. Hagener Symposium Pulvermetallurgie 2023, Hagen, Germany. ( reposiTUm)

Hojati, M., Gierl-Mayer, C., & Danninger, H. (2023, September 13). Impact fracture behaviour of powder metallurgy steels sintered at different temperatures [Conference Presentation]. 57. Metallographie-Tagung, Leoben, Leoben, Austria. ( reposiTUm)

Marschnigg, S., Herzig, C., Limbeck, A., Danninger, H., Gierl-Mayer, C., Weirather, T., & Granzer, T. (2023, October 4). Analysis Of The Binder Element Content In The W Phase Of Tungsten Heavy Alloy [Conference Presentation]. EuroPM2023 Congress & Exhibition, Lissabon, Portugal. http://hdl.handle.net/20.500.12708/192371 ( reposiTUm)

De Oro Calderon, R., Hojati, M., Hellein, R., Geroldinger, S., Gierl-Mayer, C., & Danninger, H. (2023, October 4). Sustainable Hybrid Alloyed PM Steels [Conference Presentation]. EuroPM2023 Congress & Exhibition, Lissabon, Portugal. http://hdl.handle.net/20.500.12708/192384 ( reposiTUm)

Momeni, M., Gimeno-Fabra Lluis, Danninger, H., & Gierl-Mayer, C. (2023, October 4). Ferrous Powders & Sintered Steels: An Overview of Granted Patents at the European Patent Office from 2015 to 202 [Conference Presentation]. EuroPM2023 Congress & Exhibition, Lissabon, Portugal. http://hdl.handle.net/20.500.12708/192374 ( reposiTUm)

Gierl-Mayer, C., Geroldinger, S., De Oro Calderon, R., & Danninger, H. (2023, October 4). Comparison of Low Alloyed Cr-Mo PM Steels by Thermoanalytical Technique [Conference Presentation]. EuroPM2023 Congress & Exhibition, Lisbon, Portugal. http://hdl.handle.net/20.500.12708/192373 ( reposiTUm)

Gierl-Mayer, C. (2022). Sintering Atmospheres Material / Atmosphere interaction. 20th EPMA Powder Metallurgy Summer School, Ciudad Real, Spain. http://hdl.handle.net/20.500.12708/101775 ( reposiTUm)

Danninger, H., Hojati, M., & Gierl-Mayer, C. (2022). Development of microstructure and properties in ferrous powder metallurgy compacts through different stages of sintering [Keynote Presentation]. ISNNM-2022 – 17th International Symposium on Novel and Nano Materials, Jeju, Korea (the Republic of). http://hdl.handle.net/20.500.12708/152404 ( reposiTUm)

Geroldinger, S., de Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2021). Enhanced distribution of alloying elements in PM steels by the use of tailored transient liquid phases. Online Conference EUROMAT 2021, Graz, Austria. http://hdl.handle.net/20.500.12708/101609 ( reposiTUm)

Danninger, H., Prokofyev, M., Gierl-Mayer, C., de Oro Calderon, R., Hellein, R., & Müller, A. (2021). TRIP behaviour of Mn alloyed sintered steels as a function of the carbon content. Online Conference EUROMAT 2021, Graz, Austria. http://hdl.handle.net/20.500.12708/101607 ( reposiTUm)

Gierl-Mayer, C., de Oro Calderon, R., & Danninger, H. (2021). Supersolidus sintering of PM carbon and low alloy steels for precision parts. Online Conference EUROMAT 2021, Graz, Austria. http://hdl.handle.net/20.500.12708/101608 ( reposiTUm)

Geroldinger, S., de Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2021). Tailored liquid phases for enhanced sintering of advanced PM-steels. Online Conference THERMEC’2021, Graz, Austria. http://hdl.handle.net/20.500.12708/101590 ( reposiTUm)

Danninger, H., de Oro Calderon, R., & Gierl-Mayer, C. (2021). The use of transient liquid phases in powder metallurgy. Online Conference THERMEC’2021, Graz, Austria. http://hdl.handle.net/20.500.12708/101589 ( reposiTUm)

Danninger, H., de Oro Calderon, R., & Gierl-Mayer, C. (2021). Thermoanalytical techniques for characterizing sintering processes in ferrous powder metallurgy. CEEC-TAC6 & Medicta2021, Split, Croatia. http://hdl.handle.net/20.500.12708/101599 ( reposiTUm)

Mikl, G., Höfler, T., Gierl-Mayer, C., Danninger, H., Linder, B., & Angeli, G. (2021). Scaling behaviour of Si-alloyed steel slabs under reheating conditions. Online Conference EUROMAT 2021, Graz, Austria. http://hdl.handle.net/20.500.12708/101604 ( reposiTUm)

Danninger, H., de Oro Calderon, R., Geroldinger, S., Gierl-Mayer, C., & Dunkley, J. J. (2020). The masteralloy concept for sintered steels - new impetus for a classical approach. Online Conference “ADEM 2020 - Advances in Engineering & Management,” Drobeta-Turnu Severin, Romania. http://hdl.handle.net/20.500.12708/101490 ( reposiTUm)

Geroldinger, S., de Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2020). Applying the masteralloy concept for manufacturing of sinter hardening PM steel grades. Online Conference “ADEM 2020 - Advances in Engineering & Management,” Drobeta-Turnu Severin, Romania. http://hdl.handle.net/20.500.12708/101491 ( reposiTUm)

Danninger, H., Gierl-Mayer, C., Prokofyev, M., de Oro Calderon, R., Geroldinger, S., Hellein, R., & Müller, A. (2020). Manganese - a Special Alloy Element in Sintered Steels. ISNNM2020 16th International Symposium on Novel and Nano Materials, Jeju, Korea (the Republic of). http://hdl.handle.net/20.500.12708/101466 ( reposiTUm)

Drechsel, C., Peterlik, H., Gierl-Mayer, C., & Konegger, T. (2019). Influence of divinylbenzene on the pore size of polymer-derived SiCN ceramics. XVI ECerS Conference 2019, Torino, Italy. http://hdl.handle.net/20.500.12708/101121 ( reposiTUm)

Gierl-Mayer, C. (2019). Metallographie zur Qualitätsssicherung von SInterstahl und Hartmetall - Teil 1 Sinterstahl. 38. Hagener Symposium Pulvermetallurgie - Praktikertag Pulvermetallurgie, Hagen, Germany. http://hdl.handle.net/20.500.12708/101223 ( reposiTUm)

Danninger, H., de Oro Calderon, R., & Gierl-Mayer, C. (2019). Die Masteralloy-Route als Legierungsvariante für Sinterstähle - Sinterung und Wärmebehandlung. Werkstoffwoche 2019, Dresden, Germany. http://hdl.handle.net/20.500.12708/101167 ( reposiTUm)

Geroldinger, S., Gierl-Mayer, C., Danninger, H., & de Oro Calderon, R. (2019). Cr-Si-Fe-C und Mn-Si-Fe-C Masteralloys für legierte Sinterstähle mit durch Si und C gesteuerten Eigenschaften. Werkstoffwoche 2019, Dresden, Germany. http://hdl.handle.net/20.500.12708/101169 ( reposiTUm)

Mitterlehner, M., Danninger, H., & Gierl-Mayer, C. (2019). A novel method for describing the morphology of spreaded powder layers in direct laser meltig. AAMS2019 - Alloys for Additive Manufacturing Symposium 2019, Gothenburg, Sweden. http://hdl.handle.net/20.500.12708/101172 ( reposiTUm)

Pretterhofer, S., Danninger, H., & Gierl-Mayer, C. (2019). Sinterverhalten und Phasenentwicklung während des Walzens von Al-B4C-Pulvermaterial. Werkstoffwoche 2019, Dresden, Germany. http://hdl.handle.net/20.500.12708/101170 ( reposiTUm)

Calderon, R. de O., Dunkley, J. J., Geroldinger, S., Gierl-Mayer, C., & Danninger, H. (2019). Liquid phase design and novel atomization techniques offer new chances for the “masteralloy” concept. EuroMat 2019, Stockholm, Sweden. http://hdl.handle.net/20.500.12708/101227 ( reposiTUm)

Danninger, H., de Oro Calderon, R., & Gierl-Mayer, C. (2019). The effect of natural surface oxygen on sintering of metallic systems. 2019 Spring Meeting of Korean Powder Metallurgy Institute, Yeosu, Korea (the Republic of). http://hdl.handle.net/20.500.12708/101084 ( reposiTUm)

Drechsel, C., Peterlik, H., Gierl-Mayer, C., & Konegger, T. (2019). Tailoring of the microporosity of polymer-derived SiCN ceramics using linker molecules. 7. Jahrestagung der Österreichischen Keramischen Gesellschaft (AuCerS) mit Vortragswettbewerb, Leoben, Austria. http://hdl.handle.net/20.500.12708/101097 ( reposiTUm)

Gierl-Mayer, C., Jetzinger, M., Dunkley, J. J., & Danninger, H. (2018). C-Masteralloys - Can They Substitute Graphite in PM Steels. PM AUTO 2018 - 6th international Conference on Powder Metallurgy for Automotive Parts, Isfahan, Iran (Islamic Republic of). http://hdl.handle.net/20.500.12708/100682 ( reposiTUm)

Gierl-Mayer, C. (2017). Sintern und die Wechselwirkung mit der Atmosphäre - Stand des Wissens und Herausforderungen für die Zukunft. IWM - IAPK Kolloquium 2017, Aachen, Germany. http://hdl.handle.net/20.500.12708/100283 ( reposiTUm)

Ouda, K., Danninger, H., & Gierl-Mayer, C. (2017). Magnetic measurement of retained austenite in sintered steels-benefits and limitations. RoPM-AM2017 - 5th Int. Conf. on Powder Metallurgy & Advanced Materials, Cluj-Napoca, Romania. http://hdl.handle.net/20.500.12708/100342 ( reposiTUm)

Danninger, H., de Oro Calderon, R., & Gierl-Mayer, C. (2017). Chemical reactions during sintering of PM steel compacts as a function of the alloying route. RoPM-AM2017 - 5th Int. Conf. on Powder Metallurgy & Advanced Materials, Cluj-Napoca, Romania. http://hdl.handle.net/20.500.12708/100362 ( reposiTUm)

Mitterlehner, M., Gierl-Mayer, C., Danninger, H., Leitner, H., & Wallner, S. (2017). Fließverhalten von inertgasverdüsten Pulvern für das Additive Manufacturing. Werkstoffwoche 2017, Dresden, Germany. http://hdl.handle.net/20.500.12708/100361 ( reposiTUm)

Gierl-Mayer, C. (2017). Sintern von PM Stählen - Wechslewirkungen mit der Atmosphäre. DGM-Fortbildungsseminar “PUlvermetallurgie” 20107, Dresden, Germany. http://hdl.handle.net/20.500.12708/100310 ( reposiTUm)

Marschnigg, S., Gierl-Mayer, C., Danninger, H., Weirather, T., Granzer, T., & Zobl, P. (2017). Zerstörungsfreie Qualitätsprüfung von Wolfram-Schwermetallen über die magnetische Sättigung. Werkstoffwoche 2017, Dresden, Germany. http://hdl.handle.net/20.500.12708/100360 ( reposiTUm)

Danninger, H., de Oro Calderon, R., & Gierl-Mayer, C. (2017). Die Chemie beim Sintern von metallischen Mehrkomponentensystemen. Werkstoffwoche 2017, Dresden, Germany. http://hdl.handle.net/20.500.12708/100359 ( reposiTUm)

Gierl-Mayer, C., Ouda, K., & Danninger, H. (2017). Measuring the content of retained austenite in differently alloyed steels through magnetic saturation. DF PM 2017 - Int. Conf. Deformation and Fracture in PM Materials, Stara Lesna, Slovakia. http://hdl.handle.net/20.500.12708/100376 ( reposiTUm)

Danninger, H., Vassileva, V., & Gierl-Mayer, C. (2017). Embrittling components in sintered steels: Comparison of phosphorus and boron. DF PM 2017 - Int. Conf. Deformation and Fracture in PM Materials, Stara Lesna, Slovakia. http://hdl.handle.net/20.500.12708/100375 ( reposiTUm)

Calderon, R. de O., Gierl-Mayer, C., & Danninger, H. (2017). La “química” de la sinterización: reacciones con la atmosfera y mecanismos de transferencia de oxígeno. VI Congreso de Pulvimetalurgia, I Congreso Iberoamericano de Pulvimetalurgia, Ciudad Real, Spain. http://hdl.handle.net/20.500.12708/100419 ( reposiTUm)

Danninger, H., de Oro Calderon, R., & Gierl-Mayer, C. (2017). Reactions during sintering of metallic compacts that involve interstitial elements. “Sintering 2017” International Conference on Sintering, San Diego, United States of America (the). http://hdl.handle.net/20.500.12708/100387 ( reposiTUm)

Calderon, R. de O., Gierl-Mayer, C., & Danninger, H. (2017). Master Alloys for introducing Alloying Elements in Low-Alloy steels: New Concepts and Possibilities. JSPM International Conference on Powder and Powder Metallurgy ~ 60th Anniversary ~ (JSPMIC2017), Kyoto, Japan. http://hdl.handle.net/20.500.12708/100420 ( reposiTUm)

Gierl-Mayer, C. (2016). Metallpulver - Hightech in Produktion und Charakterisierung. ERFA Runde F&E von Neuen Materialien, Leoben, Austria. http://hdl.handle.net/20.500.12708/100050 ( reposiTUm)

de Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2016). Masteralloys as a route for introducing oxygen-sensitive elements into sintered steels. Sitzung ASMET (The Austrian Sociaety for Metallurgy and Materials) -Fachausschuss Pulvermetallurgie, Plansee SE, Reutte, Austria. http://hdl.handle.net/20.500.12708/100069 ( reposiTUm)

Gierl-Mayer, C. (2016). Entkohlung durch Methanbildung von legierten Sinterstählen. Herbstsitzung des Gemeinschftsausschusses Pulvermetallurgie, Hagen, Germany. http://hdl.handle.net/20.500.12708/100049 ( reposiTUm)

Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2016). Sintering PM-Steels Containing Oxidation-Sensitive Elements: Chances and Challenges of the Master Alloy Approach. PowderMet2016, Boston, United States of America (the). http://hdl.handle.net/20.500.12708/100061 ( reposiTUm)

Gierl-Mayer, C. (2016). Sintering atmospheres. EPMA Powder Metallurgy Summer School 2016, Valencia, Spain. http://hdl.handle.net/20.500.12708/99980 ( reposiTUm)

Gianessi, A., Gierl-Mayer, C., & Danninger, H. (2015). Bimodal particle reinforcement for wear resistant powder metallurgy steels. 20. Symposium Verbundwerkstoffe und Werkstoffverbunde, Wien, Austria. http://hdl.handle.net/20.500.12708/99656 ( reposiTUm)

Gierl-Mayer, C., Bauer, V., Limbeck, A., & Danninger, H. (2015). Chemische Analyse von pulvermetallurgischen Werkstoffen mittels LaserAblation‐ICP‐MS. ASMET-Fachausschuß Pulvermetallurgie - Jahrestreffen 2015, Wien, Austria. http://hdl.handle.net/20.500.12708/99622 ( reposiTUm)

Kuzmanovic, J., Gierl-Mayer, C., & Danninger, H. (2015). Aluminiumpulverspritzguß - Einflüsse der Chemie im Bulk und an der Oberfläche. ASMET-Fachausschuß Pulvermetallurgie - Jahrestreffen 2015, Wien, Austria. http://hdl.handle.net/20.500.12708/99621 ( reposiTUm)

de Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2015). Atmosphere effects on sintering of steels containing oxygen-sensitive alloying elements. CEEC-TAC3, Ljubljana, Slovenia. http://hdl.handle.net/20.500.12708/99827 ( reposiTUm)

de Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2015). Master Alloys in Powder Metallurgy: the Challenge of exploring New Alloying Compositions. AMPT 2015, Madrid, Spain. http://hdl.handle.net/20.500.12708/99828 ( reposiTUm)

Gierl-Mayer, C., & Danninger, H. (2015). “Internes Gettern” beim Sintern von Preßlingen aus vorlegierten Pulvern. Werkstoffwoche 2015, Dresden, Germany. http://hdl.handle.net/20.500.12708/99698 ( reposiTUm)

Gierl-Mayer, C. (2015). Bor als Sinteraktivator in Stählen und seine analytische Charakterisierung mittels Laser-ablation-ICP-MS. Frühjahrssitzung des Gemeinschaftsausschusses Pulvermetallurgie, Jülich, Germany. http://hdl.handle.net/20.500.12708/99639 ( reposiTUm)

Gierl-Mayer, C., Bauer, V., Limbeck, A., & Danninger, H. (2014). Analysis of PM-steels containing boron with laser ablation-inductively coupled plasma mass spectrometry. “DFPM 2014” International Conference on Deformation and Fracture of PM Materials, Stara Lesna, Slovakia. http://hdl.handle.net/20.500.12708/99442 ( reposiTUm)

Danninger, H., & Gierl-Mayer, C. (2014). Chemistry of Sintering - often neglected but decisive. International Conference on Sintering 2014, Dresden, Germany. http://hdl.handle.net/20.500.12708/99395 ( reposiTUm)

Danninger, H., Gierl-Mayer, C., & Jaliliziyaeian, M. (2014). Effect of phosphorus addition on the impact fracture behaviour of Cr-Mo prealloyed sintered steels. “DFPM 2014” International Conference on Deformation and Fracture of PM Materials, Stara Lesna, Slovakia. http://hdl.handle.net/20.500.12708/99444 ( reposiTUm)

Gierl-Mayer, C., Jaliliziyaeian, M., Danninger, H., & Dudrova, E. (2014). Impact behaviour of sintered steels prepared from manganese prealloyed powders. “DFPM 2014” International Conference on Deformation and Fracture of PM Materials, Stara Lesna, Slovakia. http://hdl.handle.net/20.500.12708/99443 ( reposiTUm)

Danninger, H., Gierl-Mayer, C., de Oro Calderon, R., & Hryha, E. (2014). Oxygen transfer in mixed and prealloyed ferrous powder compacts during sintering. International Conference on Sintering 2014, Dresden, Germany. http://hdl.handle.net/20.500.12708/99396 ( reposiTUm)

Gierl-Mayer, C., & Danninger, H. (2014). Approach to identify the reaction mechanisms of carbothermic surface reduction during sintering of PM steels. International Conference on Sintering 2014, Dresden, Germany. http://hdl.handle.net/20.500.12708/99397 ( reposiTUm)

Danninger, H., & Gierl, C. (2013). Sintering atmospheres. PM Sintering Short Course - Advanced Processes and Materials, Wien, Austria. http://hdl.handle.net/20.500.12708/99028 ( reposiTUm)

Calderon, R. de O., Gierl-Mayer, C., & Danninger, H. (2013). The Challenge of Sintering Steels with New Alloying Compositions. 12. Sitzung des Expertenkreises “Sintern”:Gemeinschaftsausschuss Pulvermetallurgie Expertenkreis “Sintern,” Wien, Austria. http://hdl.handle.net/20.500.12708/100066 ( reposiTUm)

Danninger, H., & Gierl-Mayer, C. (2013). Sintern - mehr als Festphasendiffusion. Werkstoffsymposium “Pulvermetallurgie in Dresden - gestern, heute, morgen,” Dresden, Germany. http://hdl.handle.net/20.500.12708/99074 ( reposiTUm)

Gierl-Mayer, C. (2013). Atmosphere/Material Interaction. EPMA Powder Metallurgy Summer School 2013, Trento, Italy. http://hdl.handle.net/20.500.12708/99076 ( reposiTUm)

Wetzel, M., Wawrzik, S., Buchegger, C., Gierl, C., & Lengauer, W. (2012). Interaction of nitrogen with WC and nitrogen-assisted sintering of hardmetals. EuroPM 2012, Basel, Switzerland. http://hdl.handle.net/20.500.12708/98939 ( reposiTUm)

Konegger, T., Kohlhauser, B., Gierl, C., & Halwax, E. (2012). Mullitschaumherstellung durch Reaktionspyrolyse präkeramischer Polymere. DKG-Jahrestagung 2012, Nürnberg, Germany. http://hdl.handle.net/20.500.12708/98736 ( reposiTUm)

Gierl, C. (2012). Die chemischen Aspekte des Sinterns von metallischen Werkstoffen. Sitzung des Arbeitsausschusses des Ausschusses für Pulvermetallurgie, Bremen, Germany. http://hdl.handle.net/20.500.12708/98759 ( reposiTUm)

Danninger, H., Gierl, C., Avakemian, A., Synek, J., Zlatkov, B. S., Arzl, A., Ter Maat, J., & Neubing, H. C. (2012). Pulverspritzguss von Aluminiumlegierungen - Einfluss der Interstitials. Expertenkreis Metallpulverspritzguss - Frühjahrssitzung, Furtwangen, Germany. http://hdl.handle.net/20.500.12708/98743 ( reposiTUm)

Danninger, H., & Gierl, C. (2012). Sinterstahl-Formteile - neue Werkstoffe für eine bewährte Technologie. Werkstoffsymposium “20 Jahre Fraunhofer IFAM Dresden,” Dresden, Germany. http://hdl.handle.net/20.500.12708/98774 ( reposiTUm)

Gierl, C., Danninger, H., Avakemian, A., Synek, J., Zlatkov, B. S., Arzl, A., Ter Maat, J., & Neubing, H. C. (2011). Pulverspritzguss von Aluminiumlegierungen - Rolle der Interstitials. ASMET-Fachausschuss Pulvermetallurgie - Jahrestreffen 2011, Velden, Austria. http://hdl.handle.net/20.500.12708/98512 ( reposiTUm)

Danninger, H., Gierl, C., Avakemian, A., Synek, J., Zlatkov, B. S., Arzl, A., ter Maat, J., & Neubing, H. C. (2011). Grundlagenuntersuchungen zum Pulverspritzguss von Aluminiumlegierungen. Expertenkreis PM-Aluminium - Jahressitzung 2011, Dresden, Germany. http://hdl.handle.net/20.500.12708/98488 ( reposiTUm)

Gierl, C. (2009). Experimental modelling of sintering processes through thermal analysis. Höganäs Chair Seminar 2009 “Ferrous PM Processes - Simulation and Experiment,” Wien, Austria. http://hdl.handle.net/20.500.12708/98063 ( reposiTUm)

Danninger, H., Sohar, C., Gierl, C., Betzwar-Kotas, A., & Weiss, B. (2009). Gigacycle fatigue response of PM versus ingot metallurgy tool steels. RoPM 2009 - 4th International Conference on Powder Metallurgy, Craiova, Romania. http://hdl.handle.net/20.500.12708/98031 ( reposiTUm)

Danninger, H., Jaliliziyaeian, M., Gierl, C., & Bengtsson, S. (2009). Chemical reactions during sintering of Mn and Mn-Cr prealloyed steels in inert versus reducing atmospheres. RoPM 2009 - 4th International Conference on Powder Metallurgy, Craiova, Romania. http://hdl.handle.net/20.500.12708/98030 ( reposiTUm)

Strobl, S., Wagesreither, J., Gierl, C., Dlapka, M., Kupkova, M., Kupka, M., & Cerny, M. (2009). The influence of Cu-coating versus admixing on mechanical properties and dimensional change of sintered Fe-Cu parts. RoPM 2009 - 4th International Conference on Powder Metallurgy, Craiova, Romania. http://hdl.handle.net/20.500.12708/98032 ( reposiTUm)

Ul Mohsin, I., Lager, D., Danninger, H., Hohenauer, W., & Gierl, C. (2009). Thermo-kinetics study of MIM thermal debinding using TGA coupled with FTIR and mass spectrometry. Asianalysis X - 10th Asian Conference on Analytical Sciences, Kuala Lumpur, Malaysia. http://hdl.handle.net/20.500.12708/98064 ( reposiTUm)

Danninger, H., Harold, C., Gierl, C., Ponemayr, H., Daxelmüller, M., Simancik, F., & Izdinsky, K. (2009). Powder metallurgy manufacturing of carbon-free precipitation hardened high speed steels. YUCOMAT 2009, Herceg Novi, Montenegro. http://hdl.handle.net/20.500.12708/98058 ( reposiTUm)

Sohar, C., Betzwar-Kotas, A., Gierl, C., Weiss, B., & Danninger, H. (2008). Fractographic evaluation and fracture mechanical considerations for a cold-work tool steel. 19th Colloquium on Fatigue Mechanisms, Dresden, EU. http://hdl.handle.net/20.500.12708/97744 ( reposiTUm)

Sohar, C., Betzwar-Kotas, A., Gierl, C., Weiss, B., & Danninger, H. (2008). Einsatz physikalischer Analysemethoden bei der Untersuchung des Ermüdungsverhaltens von Werkzeugstählen. 4. ASAC JunganalytikerInnen Forum, Wien, Austria. http://hdl.handle.net/20.500.12708/97786 ( reposiTUm)

Gierl, C. (2008). Thermische Analyse für die in-situ-Charakterisierung von Sinterprozessen. Sitzung ASMET-Fachausschuss Pulvermetallurgie, Wien, Austria. http://hdl.handle.net/20.500.12708/97787 ( reposiTUm)

Sohar, C., Betzwar-Kotas, A., Gierl, C., Weiss, B., & Danninger, H. (2008). Schwingfestigkeit von erschmolzenen und pulvermetallurgischen Werkzeugstählen im Gigacycle-Bereich. Sitzung ASMET-Fachausschuss Pulvermetallurgie, Wien, Austria. http://hdl.handle.net/20.500.12708/97788 ( reposiTUm)

Ul Mohsin, I., Gierl, C., & Danninger, H. (2008). Distortion Investigation during Sintering of Copper PIM Parts. Junior Scientist Conference 2008, Vienna, Austria. http://hdl.handle.net/20.500.12708/97860 ( reposiTUm)

Azadbeh, M., Danninger, H., & Gierl, C. (2008). Study on the interparticle bonding of double pressed PM alloy steels. “DF PM 2008” Int. Conf. Deformation and Fracture in Structural PM Materials, Stara Lesna, Slovakia, EU. http://hdl.handle.net/20.500.12708/97837 ( reposiTUm)

Jaliliziyaeian, M., Gierl, C., Danninger, H., & Dudrova, E. (2008). Fracture surfaces studied on PM steels prepared from prealloyed steel powders sintered in different atmospheres. “DF PM 2008” Int. Conf. Deformation and Fracture in Structural PM Materials, Stara Lesna, Slovakia, EU. http://hdl.handle.net/20.500.12708/97838 ( reposiTUm)

Momeni, M., Gierl, C., & Danninger, H. (2008). Ratio tensile strength - Vickers hardness in sintered steels as a function of the sintering temperature. “DF PM 2008” Int. Conf. Deformation and Fracture in Structural PM Materials, Stara Lesna, Slovakia, EU. http://hdl.handle.net/20.500.12708/97841 ( reposiTUm)

Sohar, C., Betzwar-Kotas, A., Gierl, C., Weiss, B., & Danninger, H. (2008). Gigacycle fatigue fractography of cold work tool steel produced by PM compared to ingot metallurgy. “DF PM 2008” Int. Conf. Deformation and Fracture in Structural PM Materials, Stara Lesna, Slovakia, EU. http://hdl.handle.net/20.500.12708/97840 ( reposiTUm)

Gierl, C., Ul Mohsin, I., & Danninger, H. (2008). Boron activated sintering of PM steels - alternative boron sources. “DF PM 2008” Int. Conf. Deformation and Fracture in Structural PM Materials, Stara Lesna, Slovakia, EU. http://hdl.handle.net/20.500.12708/97839 ( reposiTUm)

Danninger, H., & Gierl, C. (2007). New Alloying Systems for Ferrous Powder Metallurgy Precision Parts. FITEM ’07 - VII Scientific Meeting Physics and Technology of Materials, Cacak, Serbia, Non-EU. http://hdl.handle.net/20.500.12708/97517 ( reposiTUm)

Sohar, C., Betzwar-Kotas, A., Gierl, C., Weiss, B., & Danninger, H. (2007). Influence of surface residual stresses on gigacycle failure response of cold work tool steel. 18th Colloquium on Fatigue Mechanisms, Poitiers, France, EU. http://hdl.handle.net/20.500.12708/97555 ( reposiTUm)

Danninger, H., & Gierl, C. (2006). Sintering of low-alloy steels - surface-atmosphere interactions and microstructural homogenization. Primer Congreso Espanol de Pulvimetalurgia, Leganes-Madrid, EU. http://hdl.handle.net/20.500.12708/97279 ( reposiTUm)

Berichte

Dlapka, M., Danninger, H., & Gierl, C. (2010). Sinterhardening grade steels with sufficient toughness for synchronizer hub applications, Part 6 (No. 6). http://hdl.handle.net/20.500.12708/36635 ( reposiTUm)

Dlapka, M., Danninger, H., & Gierl, C. (2010). Sinterhardening grade steels with sufficient toughness for synchronizer hub applications, Part 5 (No. 5). http://hdl.handle.net/20.500.12708/36634 ( reposiTUm)

Jaliliziyaeian, M., Danninger, H., & Gierl, C. (2008). Sintering and properties of compacts prepared from sponge and atomized iron powders and pre-alloy (Fe-1.8%Mn) powder with addition of 0.8%C. http://hdl.handle.net/20.500.12708/32724 ( reposiTUm)

Dlapka, M., Gierl, C., & Danninger, H. (2008). Sinterhardening grade steels with sufficient toughness for synchronizer hub application, Part 1 (Höganäs Chair IV-1). http://hdl.handle.net/20.500.12708/35299 ( reposiTUm)

Jaliliziyaeian, M., Danninger, H., & Gierl, C. (2007). Thermoanalytical study on the sintering of Höganäs powders A - G + 0.8%C. http://hdl.handle.net/20.500.12708/32714 ( reposiTUm)

Spezialbeiträge

de Oro Calderon, R., Dunkley, J. J., Gierl-Mayer, C., & Danninger, H. (2019). New opportunities for master alloys: Ultra high pressure water atomized powders. Powder Metallurgy Review, 8(1), 55–66. http://hdl.handle.net/20.500.12708/142709 ( reposiTUm)

de Oro Calderon, R., Gierl-Mayer, C., & Danninger, H. (2016). The master alloy route: Introducing attractive alloying elements in Powder Metallurgy steels. Powder Metallurgy Review, 5(3), 86–96. http://hdl.handle.net/20.500.12708/149374 ( reposiTUm)

Hochschulschriften

Gierl-Mayer, C. (2018). Thermoanalytical investigation of interactions between powder metallurgy steels and the atmosphere during sintering [Professorial Dissertation, Technische Universität Wien]. reposiTUm. http://hdl.handle.net/20.500.12708/158894 ( reposiTUm)