Journal Articles

Li, Y., Kahlenberg, R., Retzl, P., Shan, Y. V., Du, Y., & Kozeschnik, E. (2026). Impact of atomic couples and pairs on quenched-in vacancies in Al-Mg-Si-Cu alloys. Scripta Materialia, 271, Article 116970. https://doi.org/10.1016/j.scriptamat.2025.116970 ( reposiTUm)

Furlan, T., Schewe, M., Scherm, P., Retzl, P., Kozeschnik, E., & Menzel, A. (2025). Modelling and finite element simulation of martensite and bainite phase transformations during quenching under consideration of carbon repartitioning. Mechanics of Materials, 204, Article 105275. https://doi.org/10.1016/j.mechmat.2025.105275 ( reposiTUm)

Führer, M., Retzl, P., Kahlenberg, R., Zamberger, S., Haslberger, P., Kozeschnik, E., & Povoden-Karadeniz, E. (2025). Experimental investigation via torsion testing and simulation of static recrystallization of ferrite in ultra-low carbon steel. Materials & Design, 254, Article 114024. https://doi.org/10.1016/j.matdes.2025.114024 ( reposiTUm)

Kern, M., Bernhard, M., Presoly, P., Retzl, P., Kozeschnik, E., Ilie, S., Six, J., & Bernhard, C. (2025). Experimental analysis of the Nb(C,N) pinning effects on austenite grain growth coupled with mean‐field simulations. Steel Research International, Article 202500095. https://doi.org/10.1002/srin.202500095 ( reposiTUm)

Schuscha, B., Brandl, D., Romaner, L., Kozeschnik, E., Ebner, R., Jacob, A., Presoly, P., & Scheiber, D. (2025). Predictive modeling of the bainite start temperature using Bayesian inference. Acta Materialia, 295, Article 121131. https://doi.org/10.1016/j.actamat.2025.121131 ( reposiTUm)

Yang, Q., Wojcik, T., & Kozeschnik, E. (2025). A dislocation-based model for the substructure evolution and flow stress of aluminum alloys during high-temperature compression. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 35, 4520–4533. https://doi.org/10.1016/j.jmrt.2025.02.132 ( reposiTUm)

Retzl, P., & Kozeschnik, E. (2024). The tale of upper and lower bainite: A computational analysis of concurrent C-diffusion and precipitation. Scripta Materialia, 248, Article 116146. https://doi.org/10.1016/j.scriptamat.2024.116146 ( reposiTUm)

Viernstein, B., Solyom, L., & Kozeschnik, E. (2024). Strain Hardening in Dilute Binary Al–Cu, Al–Zn, and Al–Mn Alloys: Experiment and Modeling. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 55(9), 3627–3639. https://doi.org/10.1007/s11661-024-07475-9 ( reposiTUm)

Sadeghi, A., & Kozeschnik, E. (2024). Modeling the evolution of the dislocation density and yield stress of Al over a wide range of temperatures and strain rates. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 55(5), 1643–1653. https://doi.org/10.1007/s11661-024-07358-z ( reposiTUm)

Harsha, B. P., Patnaik, A., Banerjee, M. K., & Kozeschnik, E. (2024). Triboinformatics Modeling of Dry Sliding Wear of High Manganese Hadfield Steel alloys. International Journal of Metalcasting, 18(2), 1750–1769. https://doi.org/10.1007/s40962-023-01147-x ( reposiTUm)

Nikolaychuk, P. A., & Kozeschnik, E. (2024). Thermodynamic evaluation of the aerial and aqueous oxidation of Al – Mg, Al – Si and Al – Mg – Si system alloys at 298 K. Npj Materials Degradation, 8(94), 1–26. https://doi.org/10.1038/s41529-024-00446-w ( reposiTUm)

Cirstea, C. D., Povoden-Karadeniz, E., Cirstea, V., Tolea, F., & Kozeschnik, E. (2024). Thermodynamic and Kinetic Simulations Used for the Study of the Influence of Precipitates on Thermophysical Properties in NiTiCu Alloys Obtained by Spark Plasma Sintering. Nanomaterials, 14(5), Article 461. https://doi.org/10.3390/nano14050461 ( reposiTUm)

Shan, Y. V., Redermeier, A., Kahlenberg, R., & Kozeschnik, E. (2024). A model for the precipitate transformation of Mg-Si-rich clusters into Mg₅Si₆ β″ in Al-Mg-Si aluminum alloys. Modelling and Simulation in Materials Science and Engineering, 32(7), Article 075008. https://doi.org/10.1088/1361-651X/ad6ea8 ( reposiTUm)

Buerstmayr, R., Schulz, B., Povoden-Karadeniz, E., Kozeschnik, E., Lison-Pick, M., & Primig, S. (2024). Improved thermodynamic descriptions of carbides in Ni-based superalloys. JOM, 76(5), 2283–2301. https://doi.org/10.1007/s11837-024-06484-8 ( reposiTUm)

Kahlenberg, R., Schuster, R., García Arango, N., Falkinger, G., Stark, A., Milkereit, B., & Kozeschnik, E. (2024). Revisiting high-energy X-ray diffraction and differential scanning calorimetry data of EN AW-6082 with mean field simulations. Thermochimica Acta, 740, Article 179848. https://doi.org/10.1016/j.tca.2024.179848 ( reposiTUm)

Yang, Q., Wojcik, T., & Kozeschnik, E. (2024). Continuous Dynamic Recrystallization and Deformation Behavior of an AA1050 Aluminum Alloy during High-Temperature Compression. Metals, 14(8), Article 889. https://doi.org/10.3390/met14080889 ( reposiTUm)

Yang, Q., Wojcik, T., & Kozeschnik, E. (2024). Subgrain Size Modeling and Substructure Evolution in an AA1050 Aluminum Alloy during High-Temperature Compression. Materials, 17(17), Article 4385. https://doi.org/10.3390/ma17174385 ( reposiTUm)

Sobotka, E., Kreyca, J., Fuchs, N., Wojcik, T., Kozeschnik, E., & Povoden-Karadeniz, E. (2023). The Role of MX Carbonitrides for the Particle-Stimulated Nucleation of Ferrite in Microalloyed Steel. Metallurgical and Materials Transactions A, 54(7), 2903–2923. https://doi.org/10.1007/s11661-023-07067-z ( reposiTUm)

Kahlenberg, R., Wojcik, T., Falkinger, G., Krejci, A. L., Milkereit, B., & Kozeschnik, E. (2023). On the precipitation mechanisms of β-Mg₂Si during continuous heating of AA6061. Acta Materialia, 261, Article 119345. https://doi.org/10.1016/j.actamat.2023.119345 ( reposiTUm)

Jacob, A. A. F., Povoden-Karadeniz, E., Retzl, P., & Kozeschnik, E. (2023). Reassessment of low-temperature Gibbs energies of BCC and FCC in steel for T₀-temperature evaluation. Calphad, 81, Article 102531. https://doi.org/10.1016/j.calphad.2023.102531 ( reposiTUm)

Kahlenberg, R., Falkinger, G., Milkereit, B., & Kozeschnik, E. (2023). Modeling of heterogeneous site energy distributions in precipitate nucleation. Modelling and Simulation in Materials Science and Engineering, 31(8), Article 085003. https://doi.org/10.1088/1361-651X/acf512 ( reposiTUm)

Jacob, A. A. F., Schuscha, B., Retzl, P., Shan, Y., & Kozeschnik, E. (2023). Thermodynamic Prediction of the Impact of Carbon on Bainite Formation, Including the BCT Transformation. Journal of Phase Equilibria and Diffusion, 44(6), 729–737. https://doi.org/10.1007/s11669-023-01067-7 ( reposiTUm)

Rath, M., Friessnegger, B., Angerer, P., Raninger, P., Stanojevic, A., & Kozeschnik, E. (2023). In-situ characterization method for the delta phase precipitation kinetics in the nickel-base alloy 718 using high-temperature X-ray diffraction (HT-XRD) techniques. Materials Characterization, 206(A), Article 113382. https://doi.org/10.1016/j.matchar.2023.113382 ( reposiTUm)

Sobotka, E. H. R., Kreyca, J., Kahlenberg, R., Jacob, A. A. F., Kozeschnik, E., & Povoden-Karadeniz, E. (2023). Analysis of Recrystallization Kinetics Concerning the Experimental, Computational, and Empirical Evaluation of Critical Temperatures for Static Recrystallization in Nb, Ti, and V Microalloyed Steels. Metals, 13(5), Article 884. https://doi.org/10.3390/met13050884 ( reposiTUm)

Etzlstorfer, C., Leitner, A., Arenholz, E., & Kozeschnik, E. (2023). Numerical Simulation of Carbon Redistribution during Steel Composite Production. Steel Research International, Article 2300073. https://doi.org/10.1002/srin.202300073 ( reposiTUm)

Buerstmayr, R., Theska, F., Kozeschnik, E., Webster, R. F., Lison-Pick, M., Street, S. T. G., & Primig, S. (2023). Investigation and Simulation of the Effects of nm-Scale γ′ Precipitates on the Recrystallization of Ni-based Superalloys. Metallurgical and Materials Transactions A, 54, 2259–2276. https://doi.org/10.1007/s11661-023-07008-w ( reposiTUm)

Adomako, N. K., Haghdadi, N., Dingle, J. F. L., Kozeschnik, E., Liao, X., Ringer, S. P., & Primig, S. (2023). Predicting solid-state phase transformations during metal additive manufacturing: A case study on electron-beam powder bed fusion of Inconel-738. Additive Manufacturing, 76, Article 103771. https://doi.org/10.1016/j.addma.2023.103771 ( reposiTUm)

Sadeghi, A., Kozeschnik, E., & Biglari, F. R. (2023). Investigation of the Formability of Cryogenic Rolled AA6061 and Its Improvement Using Artificial Aging Treatment. Journal of Manufacturing and Materials Processing, 7(2), Article 54. https://doi.org/10.3390/jmmp7020054 ( reposiTUm)

Fotopoulos, V., Mora-Fonz, D., Kleinbichler, M., Bodlos, R., Kozeschnik, E., Romaner, L., & Shluger, A. L. (2023). Structure and Migration Mechanisms of Small Vacancy Clusters in Cu: A Combined EAM and DFT Study. Nanomaterials, 13(9), Article 1464. https://doi.org/10.3390/nano13091464 ( reposiTUm)

Ressel, G., Brandl, D., Hönigmann, T., Lukas, M., Stark, A., Gruber, C., Lukas, S., Stockinger, M., & Kozeschnik, E. (2023). Microstructural refinement by spontaneous recrystallization without prior deformation of a 15-5 PH steel alloy and its mechanism. Materials & Design, 234, Article 112370. https://doi.org/10.1016/j.matdes.2023.112370 ( reposiTUm)

Viernstein, B., Wojcik, T., & Kozeschnik, E. (2022). State Parameter-Based Yield Strength Model for Integration in Finite Element User-Material Routines. Metals, 12(7), Article 1207. https://doi.org/10.3390/met12071207 ( reposiTUm)

Harsha, B. P., Patnaik, A., Banerjee, M. K., & Kozeschnik, E. (2022). Physical, Mechanical, and Tribological Assessment of High Manganese-Silicon Steel Alloys. Silicon. https://doi.org/10.1007/s12633-022-02260-y ( reposiTUm)

Miesenberger, B., Kozeschnik, E., Milkereit, B., Warczok, P., & Povoden-Karadeniz, E. (2022). Computational analysis of heterogeneous nucleation and precipitation in AA6005 Al-alloy during continuous cooling DSC experiments. Materialia, 25, Article 101538. https://doi.org/10.1016/j.mtla.2022.101538 ( reposiTUm)

Scheiber, D., Povoden-Karadeniz, E., Kozeschnik, E., & Romaner, L. (2022). Prediction of grain boundary chemistry in multicomponent Mo alloys with coupled precipitation and segregation kinetics simulations. Acta Materialia, 224, Article 117482. https://doi.org/10.1016/j.actamat.2021.117482 ( reposiTUm)

Ahmadi, M. R., Sonderegger, B., Povoden-Karadeniz, E., Falahati, A., yadav, surya, Sommitsch, C., & Kozeschnik, E. (2022). Coherency strengthening of oblate precipitates extended in the {100} plane of fcc crystals: Modeling and experimental validation. Materialia, 21, Article 101328. https://doi.org/10.1016/j.mtla.2022.101328 ( reposiTUm)

Raabe, D., Ponge, D., Uggowitzer, P. J., Roscher, M., Paolantonio, M., Liu, C., Antrekowitsch, H., Kozeschnik, E., Seidmann, D., Gault, B., De Geuser, F., Deschamps, A., Hutchinson, C., Liu, C., Li, Z., Prangnell, P., Robson, J., Shanthraj, P., Vakili, S., … Pogatscher, S. (2022). Making sustainable aluminum by recycling scrap: The science of “dirty” alloys. Progress in Materials Science, 128, Article 100947. https://doi.org/10.1016/j.pmatsci.2022.100947 ( reposiTUm)

Svoboda, J., Zickler, G. A., Kozeschnik, E., & Fischer, F. D. (2022). Generalization of classical Hillert’s grain growth and LSW theories to a wide family of kinetic evolution equations and stationary distribution functions. Acta Materialia, 235, Article 118085. https://doi.org/10.1016/j.actamat.2022.118085 ( reposiTUm)

Vogric, M., Kozeschnik, E., Svoboda, J., Führer, M., Kreyca, J., Wei, W. W., & Povoden-Karadeniz, E. (2022). Kinetic Modeling of Grain Boundary Cementite Evolution. Metallurgical and Materials Transactions A, 53(10), 3759–3773. https://doi.org/10.1007/s11661-022-06784-1 ( reposiTUm)

Shan, Y. V., Soliman, M., Palkowski, H., & Kozeschnik, E. (2021). Modeling of Bake Hardening Kinetics and Carbon Redistribution in Dual-Phase Steels. Steel Research International, 92(1), 2000307. https://doi.org/10.1002/srin.202000307 ( reposiTUm)

Retzl, P., Mayer, W., Krizan, D., & Kozeschnik, E. (2021). Simulation of Carbo-Nitride Precipitation in the Multi-Phase Microstructure of Micro-Alloyed Transformation-Induced Plasticity Steel. Steel Research International, 92(1), 2000197. https://doi.org/10.1002/srin.202000197 ( reposiTUm)

Gruber, C., Raninger, P., Stanojevic, A., Godor, F., Rath, M., Kozeschnik, E., & Stockinger, M. (2021). Simulation of Dynamic and Meta-Dynamic Recrystallization Behavior of Forged Alloy 718 Parts Using a Multi-Class Grain Size Model. Materials, 14(1), 111. https://doi.org/10.3390/ma14010111 ( reposiTUm)

Harsha, B. P., Patnaik, A., Banerjee, M. K., & Kozeschnik, E. (2021). Assessment of microstructural characterization and Thermo-Kinetic simulations for producing strengthened and toughened martensitic steels. Materials Today: Proceedings, 44, 4903–4907. https://doi.org/10.1016/j.matpr.2020.11.883 ( reposiTUm)

Retzl, P., Zamberger, S., & Kozeschnik, E. (2021). Computational analysis of austenite film thickness and C-redistribution in carbide-free bainite. Materials Research Express, 8(7), 076502. https://doi.org/10.1088/2053-1591/ac0d6f ( reposiTUm)

Wei, W. W., Retzl, P., Kozeschnik, E., & Povoden-Karadeniz, E. (2021). A semi-physical α-β model on bainite transformation kinetics and carbon partitioning. Acta Materialia, 207, Article 116701. https://doi.org/10.1016/j.actamat.2021.116701 ( reposiTUm)

Siroky, G., Kraker, E., Magnien, J., Melinc, D., Kieslinger, D., Kozeschnik, E., & Ecker, W. (2021). Effect of solder joint size and composition on liquid-assisted healing. Microelectronics Reliability, 119(114066), 114066. https://doi.org/10.1016/j.microrel.2021.114066 ( reposiTUm)

Siroky, G., Kraker, E., Rosc, J., Kieslinger, D., Brunner, R., van der Zwaag, S., Kozeschnik, E., & Ecker, W. (2021). Analysis of Sn-Bi Solders: X-ray Micro Computed Tomography Imaging and Microstructure Characterization in Relation to Properties and Liquid Phase Healing Potential. Materials, 14(1), 153. https://doi.org/10.3390/ma14010153 ( reposiTUm)

Siroky, G., Kraker, E., Kieslinger, D., Kozeschnik, E., & Ecker, W. (2021). Micromechanics-based damage model for liquid-assisted healing. International Journal of Damage Mechanics, 30(1), 123–144. https://doi.org/10.1177/1056789520948561 ( reposiTUm)

Riedlsperger, F., Gsellmann, B., Povoden-Karadeniz, E., Tasso, O., Matera, S., Domankova, M., Kauffmann, F., Kozeschnik, E., & Sonderegger, B. (2021). Thermodynamic Modelling and Microstructural Study of Z-Phase Formation in a Ta-Alloyed Martensitic Steel. Materials, 14(6), Article 1332. https://doi.org/10.3390/ma14061332 ( reposiTUm)

Svoboda, J., Shan, Y. V., Zickler, G. A., Kozeschnik, E., & Fischer, F. D. (2020). Local approach for coarsening of precipitates. Scripta Materialia, 178, 232–235. https://doi.org/10.1016/j.scriptamat.2019.11.029 ( reposiTUm)

Viernstein, B., & Kozeschnik, E. (2020). Integrated Physical-Constitutive Computational Framework for Plastic Deformation Modeling. Metals, 10(7), 869. https://doi.org/10.3390/met10070869 ( reposiTUm)

Soliman, M., Shan, Y., Mendez-Martin, F., Kozeschnik, E., & Palkowski, H. (2020). Strain aging characterization and physical modelling of over-aging in dual phase steel. Materials Science and Engineering: A, 788(139595), 139595. https://doi.org/10.1016/j.msea.2020.139595 ( reposiTUm)

Zügner, D., Zamberger, S., Yigit, N., Rupprechter, G., & Kozeschnik, E. (2020). Thermal desorption spectra of H in an Fe-C-Nb alloy evaluated by diffusion simulation. Steel Research International, 91(12), 2000240. https://doi.org/10.1002/srin.202000240 ( reposiTUm)

Siroky, G., Magnien, J., Melinc, D., Kozeschnik, E., Kieslinger, D., Kraker, E., & Ecker, W. (2020). Lap shear test for solder materials: Local stress states and their effect on deformation and damage. Microelectronics Reliability, 109(113655), 113655. https://doi.org/10.1016/j.microrel.2020.113655 ( reposiTUm)

Siroky, G., Kraker, E., Kieslinger, D., Romaner, L., Kozeschnik, E., & Ecker, W. (2020). Modelling of Void Collapse with Molecular Dynamics in Pure Sn. Proceedings. https://doi.org/10.3390/proceedings2020056029 ( reposiTUm)

Morais, P. J., Gomes, B., Santos, P., Gomes, M., Gradinger, R., Schnall, M., Bozorgi, S., Klein, T., Fleischhacker, D., Warczok, P., Falahati, A., & Kozeschnik, E. (2020). Characterisation of a High-Performance Al-Zn-Mg-Cu Alloy Designed for Wire Arc Additive Manufacturing. Materials, 13(7), Article 1610. https://doi.org/10.3390/ma13071610 ( reposiTUm)

Ledermueller, C., Kozeschnik, E., Webster, R. F., & Primig, S. (2019). Advanced thermo-mechanical process for homogenous hierarchical microstructures in HSLA steels. Metallurgical and Materials Transactions A, 50(12), 5800–5815. https://doi.org/10.1007/s11661-019-05486-5 ( reposiTUm)

Svoboda, J., Shan, Y. V., Kozeschnik, E., & Fischer, F. D. (2019). Influence of misfit stress relaxation by power-law creep and plasticity on kinetics of coarsening of precipitates. Scripta Materialia, 168, 81–85. https://doi.org/10.1016/j.scriptamat.2019.04.016 ( reposiTUm)

Etzlstorfer, C., Leitner, A., Arenholz, E., & Kozeschnik, E. (2019). Cold roll cladding of carbon steels. Key Engineering Materials, 809, 100–105. https://doi.org/10.4028/www.scientific.net/kem.809.100 ( reposiTUm)

Qin, L., Dellago, C., & Kozeschnik, E. (2019). An efficient method to reconstruct free energy profiles for diffusive processes in transition interface sampling and forward flux sampling simulations. The Journal of Chemical Physics, 150(9), 094114. https://doi.org/10.1063/1.5080933 ( reposiTUm)

Lückl, M., Wojcik, T., Povoden-Karadeniz, E., Zamberger, S., & Kozeschnik, E. (2018). Co-Precipitation Behavior of MnS and AlN in a Low-Carbon Steel. Steel Research International, 89(3), 1700342. https://doi.org/10.1002/srin.201700342 ( reposiTUm)

Kreyca, J., & Kozeschnik, E. (2018). Analysis of the Temperature and Strain-Rate Dependences of Strain Hardening. Metallurgical and Materials Transactions A, 49(1), 18–21. https://doi.org/10.1007/s11661-017-4402-5 ( reposiTUm)

Jacob, A., Povoden-Karadeniz, E., & Kozeschnik, E. (2018). Revised thermodynamic description of the Fe-Cr system based on an improved sublattice model of the σ phase. Calphad, 60, 16–28. https://doi.org/10.1016/j.calphad.2017.10.002 ( reposiTUm)

Kreyca, J., & Kozeschnik, E. (2018). State parameter-based constitutive modelling of stress strain curves in Al-Mg solid solutions. International Journal of Plasticity, 103, 67–80. https://doi.org/10.1016/j.ijplas.2018.01.001 ( reposiTUm)

Reisinger, S., Kozeschnik, E., Ressel, G., Keckes, J., Stark, A., Marsoner, S., & Ebner, R. (2018). Strain energy contributions on the bainitic phase transformation in a CrMoV steel during continuous cooling. Materials & Design, 155, 475–484. https://doi.org/10.1016/j.matdes.2018.06.014 ( reposiTUm)

Holly, S., Haslberger, P., Zügner, D., Schnitzer, R., & Kozeschnik, E. (2018). Development of high-strength welding consumables using calculations and microstructural characterisation. Welding in the World, 62(3), 451–458. https://doi.org/10.1007/s40194-018-0562-1 ( reposiTUm)

Qin, L., Redermeier, A., Dellago, C., Kozeschnik, E., & Karner, C. (2018). Rigid-lattice Monte Carlo study of nucleation kinetics in dilute bcc Fe- Cu alloys using statistical sampling techniques. Acta Materialia, 159, 429–438. https://doi.org/10.1016/j.actamat.2018.08.035 ( reposiTUm)

Wojcik, T., Rath, M., & Kozeschnik, E. (2018). Characterisation of secondary phases in Ni-base superalloy Rene 65. Materials Science and Technology, 34(13), 1558–1564. https://doi.org/10.1080/02670836.2018.1505227 ( reposiTUm)

Buken, H., & Kozeschnik, E. (2017). A model for static recrystallization with simultaneous precipitation and solute drag. Metallurgical and Materials Transactions A. https://doi.org/10.1007/s11661-016-3524-5 ( reposiTUm)

Jacob, A., Povoden-Karadeniz, E., & Kozeschnik, E. (2017). The Cr-Nb-Si system: Improved thermodynamic modelling and its use in simulation of Laves phase in steel. Calphad, 56, 80–91. https://doi.org/10.1016/j.calphad.2016.12.002 ( reposiTUm)

Dépinoy, S., Toffolon-Masclet, C., Urvoy, S., Roubaud, J., Marini, B., Roch, F., Kozeschnik, E., & Gourgues-Lorenzon, A.-F. (2017). Carbide Precipitation in 2.25 Cr-1 Mo Bainitic Steel: Effect of Heating and Isothermal Tempering Conditions. Metallurgical and Materials Transactions A, 48(5), 2164–2178. https://doi.org/10.1007/s11661-017-4045-6 ( reposiTUm)

Kreyca, J., & Kozeschnik, E. (2017). Flow Stress Modelling and Microstructure Development during Deformation of Metallic Materials. Materials Science Forum, 892, 44–49. https://doi.org/10.4028/www.scientific.net/msf.892.44 ( reposiTUm)

Kreyca, J., & Kozeschnik, E. (2017). Temperature-dependent strain hardening, precipitation and deformationinduced microstructure evolution in AA 6061. Materials Science and Engineering: A, 708, 411–418. https://doi.org/10.1016/j.msea.2017.10.027 ( reposiTUm)

Bahmani-Oskooee, M., Hossein Nedjad, S., Samadi, A., & Kozeschnik, E. (2017). Cu-bearing, martensitic stainless steels for applications in biological environments. Materials & Design, 130, 442–451. https://doi.org/10.1016/j.matdes.2017.05.079 ( reposiTUm)

Schnitzer, R., Zügner, D., Haslberger, P., Ernst, W., & Kozeschnik, E. (2017). Influence of alloying elements on the mechanical properties of high-strength weld metal. Science and Technology of Welding and Joining, 22(6), 536–543. https://doi.org/10.1080/13621718.2016.1274095 ( reposiTUm)

Primig, S., Stechauner, G., & Kozeschnik, E. (2017). Early Stages of Cu Precipitation in 15 - 5 PH Maraging Steel Revisited - Part I: Experimental Analysis. Steel Research International, 88(1), 1–10. http://hdl.handle.net/20.500.12708/147793 ( reposiTUm)

Stechauner, G., Primig, S., & Kozeschnik, E. (2017). Early Stages of Cu Precipitation in 15-5 PH Maraging Steel Revisited - Part II: Thermokinetic Simulation. Steel Research International, 88(1, 1600085). http://hdl.handle.net/20.500.12708/148017 ( reposiTUm)

Vieweg, A., Povoden-Karadeniz, E., Ressel, G., Prevedel, P., Wojcik, T., Mendez-Martin, F., Stark, A., Keckes, J., & Kozeschnik, E. (2017). Phase evolution and carbon redistribution during continuous tempering of martensite studied with high resolution techniques. Materials & Design, 136, 214–222. https://doi.org/10.1016/j.matdes.2017.09.065 ( reposiTUm)

Ahmadi, M. R., Rath, M., Povoden-Karadeniz, E., Primig, S., Wojcik, T., Danninger, A., Stockinger, M., & Kozeschnik, E. (2017). Modeling of precipitation strengthening in Inconel 718 including non-spherical 𝛾’’ precipitates. Modelling and Simulation in Materials Science and Engineering, 25(5), Article 055005. https://doi.org/10.1088/1361-651x/aa6f54 ( reposiTUm)

Imtiaz, F., & Kozeschnik, E. (2017). Investigation of Austenite-to-Ferrite Transformation in Ultralow and Low-Carbon Steel Using High-Speed Quenching Dilatometry and Thermokinetic Simulation. Metallurgical and Materials Transactions A, 48(7), 3193–3204. https://doi.org/10.1007/s11661-017-4078-x ( reposiTUm)

Svoboda, J., Shan, Y. V., Kozeschnik, E., & Fischer, F. D. (2017). Couples and pairs formation-thermodynamic and kinetic modelling applied to Al-Mg-Si. Modelling and Simulation in Materials Science and Engineering, 25(6), 065011. https://doi.org/10.1088/1361-651x/aa76cf ( reposiTUm)

Stopher, M. A., Lang, P., Kozeschnik, E., & Rivera-Diaz-del-Castillo, P. E. J. (2016). Modelling hydrogen migration and trapping in steels. Materials & Design, 106, 205–215. https://doi.org/10.1016/j.matdes.2016.05.051 ( reposiTUm)

Fischer, F. D., Svoboda, J., Antretter, T., & Kozeschnik, E. (2016). Stress relaxation by power-law creep during growth of a misfitting precipitate. International Journal of Solids and Structures, 96, 74–80. https://doi.org/10.1016/j.ijsolstr.2016.06.021 ( reposiTUm)

Schmidtchen, M., Rimnac, A., Warczok, P., Kozeschnik, E., Bernhard, C., Bragin, S., Kawalla, R., & Linzer, B. (2016). Investigation of the influence of the chemical composition of HSLA steel grades on the microstructure homogeneity during hot rolling in continuous rolling mills using a fast layer model. IOP Conference Series: Materials Science and Engineering, 119, 012001. https://doi.org/10.1088/1757-899x/119/1/012001 ( reposiTUm)

Buken, H., & Kozeschnik, E. (2016). State parameter-based modelling of microstructure evolution in micro-alloyed steel during hot forming. IOP Conference Series: Materials Science and Engineering, 119, 012023. https://doi.org/10.1088/1757-899x/119/1/012023 ( reposiTUm)

Cha, S. C., Hong, S.-H., Kim, M.-Y., Park, J., Shim, J.-H., Jung, W.-S., Rath, M., & Kozeschnik, E. (2016). CALPHAD-based alloy design for advanced automotive steels – Part II: Compositional and microstructural modification for advanced carburizing steels. Calphad, 54, 172–180. https://doi.org/10.1016/j.calphad.2016.04.008 ( reposiTUm)

Lückl, M., Zamberger, S., & Kozeschnik, E. (2016). Kinetics Simulation of MnS Precipitation in Electrical Steel. Steel Research International, 87, 271–275. http://hdl.handle.net/20.500.12708/148261 ( reposiTUm)

Buken, H., Sherstnev, P., & Kozeschnik, E. (2016). A state parameter-based model for static recrystallization interacting with precipitation. Modelling and Simulation in Materials Science and Engineering, 24(3), 035006. https://doi.org/10.1088/0965-0393/24/3/035006 ( reposiTUm)

Zamberger, S., Lang, P., Klösch, G., Klarner, J., & Kozeschnik, E. (2016). Long-range diffusion of H in the presence of traps in a microalloyed steel. Computational Materials Science, 113, 266–274. https://doi.org/10.1016/j.commatsci.2015.11.014 ( reposiTUm)

Lückl, M., Caliskanoglu, O., Ilie, S., Six, J., & Kozeschnik, E. (2016). Impact of Surface Structure Control Cooling during Continuous Casting on Hot Ductility of Microallyed Steel. Steel Research International, 87, 871–879. http://hdl.handle.net/20.500.12708/148262 ( reposiTUm)

Svoboda, J., Fischer, F. D., Riedel, H., & Kozeschnik, E. (2016). Precipitate growth in multi-component systems with stress relaxation by diffusion and creep. International Journal of Plasticity, 82, 112–126. http://hdl.handle.net/20.500.12708/149726 ( reposiTUm)

Svoboda, J., Shan, Y. V., Kozeschnik, E., & Fischer, F. D. (2016). A thermokinetic model for Mg-Si couple formation in Al-Mg-Si alloys. Modelling and Simulation in Materials Science and Engineering, 24(3), 035021. https://doi.org/10.1088/0965-0393/24/3/035021 ( reposiTUm)

Fischer, F. D., Svoboda, J., Antretter, T., & Kozeschnik, E. (2015). Relaxation of a precipitate misfit stress state by creep in the matrix. International Journal of Plasticity, 64, 164–176. https://doi.org/10.1016/j.ijplas.2014.08.014 ( reposiTUm)

Lang, P., Rath, M., Kozeschnik, E., & Rivera-Diaz-Del-Castillo, P. E. J. (2015). Modelling the influence of austenitisation temperature on hydrogen trapping in Nb containing martensitic steels. Scripta Materialia, 101(101), 60–63. http://hdl.handle.net/20.500.12708/151759 ( reposiTUm)

Povoden-Karadeniz, E., Lang, P., Moszner, F., Pogatscher, S., Ruban, A. V., Uggowitzer, P. J., & Kozeschnik, E. (2015). Thermodynamics of Pd-Mn phases and extension to the Fe-Mn-Pd system. Calphad, 51, 314–333. https://doi.org/10.1016/j.calphad.2015.09.003 ( reposiTUm)

Shim, J.-H., Povoden-Karadeniz, E., Kozeschnik, E., & Wirth, B. (2015). Modeling precipitation thermodynamics and kinetics in type 316 austenitic stainless steels with varying composition as an initial step toward predicting phase stability during irradiation. Journal of Nuclear Materials, 462, 250–257. http://hdl.handle.net/20.500.12708/151588 ( reposiTUm)

Svoboda, J., Zickler, G. A., Kozeschnik, E., & Fischer, F. D. (2015). Kinetics of interstitial segregation in Cottrell atmospheres and grain boundaries. Philosophical Magazine Letters, 95(9), 458–465. https://doi.org/10.1080/09500839.2015.1087652 ( reposiTUm)

Stechauner, G., & Kozeschnik, E. (2015). Thermo-kinetic modeling of Cu precipitation in α-Fe. Acta Materialia, 100, 135–146. https://doi.org/10.1016/j.actamat.2015.08.042 ( reposiTUm)

Zamberger, S., Whitmore, L., Krisam, S., Wojcik, T., & Kozeschnik, E. (2015). Experimental and computational study of cementite precipitation in tempered martensite. Modelling and Simulation in Materials Science and Engineering, 23(5), 055012. https://doi.org/10.1088/0965-0393/23/5/055012 ( reposiTUm)

Zenisek, J., Kozeschnik, E., Svoboda, J., & Fischer, F. D. (2015). Modelling the role of compositional fluctuations in nucleation kinetics. Acta Materialia, 91(91), 365–376. http://hdl.handle.net/20.500.12708/151753 ( reposiTUm)

Ahmadi, M. R., Whitmore, L., Povoden-Karadeniz, E., Stockinger, M., Falahati, A., & Kozeschnik, E. (2014). Simulation of yield strength in Allvac^R 718Plus^T^M. Advanced Materials Research, 922, 7–12. https://doi.org/10.4028/www.scientific.net/amr.922.7 ( reposiTUm)

Lang, P., Wojcik, T., Povoden-Karadeniz, E., Cirstea, C. D., & Kozeschnik, E. (2014). Crystal structure and free energy of Ti₂Ni₃ precipitates in Ti-Ni alloys from first principles. Computational Materials Science, 93, 46–49. https://doi.org/10.1016/j.commatsci.2014.06.019 ( reposiTUm)

Lang, P., Shan, Y. V., & Kozeschnik, E. (2014). The life-time of structural vacancies in the presence of solute trapping. Materials Science Forum, 794–796, 963–970. https://doi.org/10.4028/www.scientific.net/msf.794-796.963 ( reposiTUm)

Timoshenkov, A., Warczok, P., Albu, M., Klarner, J., Kozeschnik, E., Gruber, G., & Sommitsch, C. (2014). Influence of deformation on phase transformation and precipitation of steels for oil country tubular goods. Steel Research International, 85(6), 954–967. http://hdl.handle.net/20.500.12708/155926 ( reposiTUm)

Lang, P., Weisz, T., Ahmadi, M. R., Povoden-Karadeniz, E., Falahati, A., & Kozeschnik, E. (2014). Thermo-kinetic simulation of the yield strength evolution of AA7075 during natural aging. Advanced Materials Research, 922, 406–411. https://doi.org/10.4028/www.scientific.net/amr.922.406 ( reposiTUm)

Falahati, A., Wu, J., Lang, P., Ahmadi, M. R., Povoden-Karadeniz, E., & Kozeschnik, E. (2014). Assessment of parameters for precipitation simulation of heat treatable aluminum alloys using differential scanning calorimetry. Transactions of Nonferrous Metals Society of China, 24(7), 2157–2167. https://doi.org/10.1016/s1003-6326(14)63327-6 ( reposiTUm)

Timoshenkov, A., Warczok, P., Albu, M., Klarner, J., Kozeschnik, E., Bureau, R., & Sommitsch, C. (2014). Modelling the dynamic recrystallization in C-Mn micro-alloyed steel during thermo-mechanical treatment using cellular automata. Computational Materials Science, 94, 85–94. https://doi.org/10.1016/j.commatsci.2014.02.017 ( reposiTUm)

Pogatscher, S., Kozeschnik, E., Antrekowitsch, H., Werinos, M., Gerstl, S. S. A., Löffler, J. F., & Uggowitzer, P. J. (2014). Process-controlled suppression of natural aging in an Al-Mg-Si alloy. Scripta Materialia, 89, 53–56. https://doi.org/10.1016/j.scriptamat.2014.06.025 ( reposiTUm)

Nöhrer, M., Mayer, W., Primig, S., Zamberger, S., Kozeschnik, E., & Leitner, H. (2014). Influence of Deformation on the Precipitation Behavior of Nb(CN) in Austenite and Ferrite. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 45(10), 4210–4219. https://doi.org/10.1007/s11661-014-2373-3 ( reposiTUm)

Primig, S., Leitner, H., & Kozeschnik, E. (2014). Early Stages of Precipitation: Experiments and Modelling. BHM Berg- Und Hüttenmännische Monatshefte, 159(1), 5–11. https://doi.org/10.1007/s00501-013-0226-9 ( reposiTUm)

Nöhrer, M., Mayer, W., Zamberger, S., Kozeschnik, E., & Leitner, H. (2014). Precipitation Behavior of Strain- Induced V Precipitates in Ferrite at Different Temperatures in a 0.2 wt% Carbon Steel. Steel Research International, 85(4), 679–688. http://hdl.handle.net/20.500.12708/157937 ( reposiTUm)

Ahmadi, M. R., Povoden-Karadeniz, E., Whitmore, L., Stockinger, M., Falahati, A., & Kozeschnik, E. (2014). Yield strength prediction in Ni-base alloy 718Plus based on thermo-kinetic precipitation simulation. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 608, 114–122. https://doi.org/10.1016/j.msea.2014.04.054 ( reposiTUm)

Ahmadi, M. R., Povoden-Karadeniz, E., Sonderegger, B., Öksüz, K. I., Falahati, A., & Kozeschnik, E. (2014). A model for coherency strengthening of large precipitates. Scripta Materialia, 84–85, 47–50. https://doi.org/10.1016/j.scriptamat.2014.04.019 ( reposiTUm)

Povoden-Karadeniz, E., Eidenberger, E., Lang, P., Stechauner, G., Leitner, H., & Kozeschnik, E. (2014). Simulation of precipitate evolution in Fe-25 Co-15 Mo with Si addition based on computational thermodynamics. Journal of Alloys and Compounds, 587, 158–170. https://doi.org/10.1016/j.jallcom.2013.10.166 ( reposiTUm)

Lang, P., Povoden-Karadeniz, E., Falahati, A., & Kozeschnik, E. (2014). Simulation of the effect of composition on the precipitation in 6xxx Al alloys during continuous-heating DSC. Journal of Alloys and Compounds, 612, 443–449. https://doi.org/10.1016/j.jallcom.2014.05.191 ( reposiTUm)

Ahmadi, M. R., Povoden-Karadeniz, E., Öksüz, K. I., Falahati, A., & Kozeschnik, E. (2014). A model for precipitation strengthening in multi-particle systems. Computational Materials Science, 91, 173–186. https://doi.org/10.1016/j.commatsci.2014.04.025 ( reposiTUm)

Moszner, F., Povoden-Karadeniz, E., Pogatscher, S., Uggowitzer, P. J., Estrin, Y., Gerstl, S. S. A., Kozeschnik, E., & Löffler, J. F. (2014). Reverse alpha’ -#gt gamma transformation mechanisms of martensitic Fe-Mn and age-hardenable Fe-Mn-Pd alloys upon fast and slow continuous heating. Acta Materialia, 72, 99–109. https://doi.org/10.1016/j.actamat.2014.03.032 ( reposiTUm)

Whitmore, L., Ahmadi, M. R., Guetaz, L., Leitner, H., Povoden-Karadeniz, E., Stockinger, M., & Kozeschnik, E. (2014). The microstructure of heat-treated nickel-based superalloy 718Plus. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 610, 39–45. https://doi.org/10.1016/j.msea.2014.05.022 ( reposiTUm)

Whitmore, L., Ahmadi, M. R., Stockinger, M., Povoden-Karadeniz, E., Kozeschnik, E., & Leitner, H. (2014). Microstructural investigation of thermally aged nickel-based superalloy 718Plus. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 594, 253–259. https://doi.org/10.1016/j.msea.2013.11.037 ( reposiTUm)

Ahmadi, M. R., Sonderegger, B., Povoden-Karadeniz, E., Falahati, A., & Kozeschnik, E. (2014). Precipitate strengthening of non-spherical precipitates extended in #lt 100 #gt or {100} direction in fcc crystals. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 590, 262–266. https://doi.org/10.1016/j.msea.2013.10.043 ( reposiTUm)

Lang, P., Wojcik, T., Povoden-Karadeniz, E., Falahati, A., & Kozeschnik, E. (2014). Thermo-kinetic prediction of metastable and stable phase precipitation in Al-Zn-Mg series aluminium alloys during non-isothermal DSC analysis. Journal of Alloys and Compounds, 609, 129–136. https://doi.org/10.1016/j.jallcom.2014.04.119 ( reposiTUm)

Maier, C. H., Lüftl, S., & Kozeschnik, E. (2014). Study of molten metal droplet adhesion to organic anti-spatter coatings. Science and Technology of Welding and Joining, 19(8), 638–645. https://doi.org/10.1179/1362171814y.0000000237 ( reposiTUm)

Stechauner, G., & Kozeschnik, E. (2014). Self-Diffusion in Grain Boundaries and Dislocation Pipes in Al, Fe, and Ni and Application to AlN Precipitation in Steel. Journal of Materials Engineering and Performance, 23(5), 1576–1579. https://doi.org/10.1007/s11665-014-0921-z ( reposiTUm)

Stechauner, G., & Kozeschnik, E. (2014). Assessment of substitutional self-diffusion along short-circuit paths in Al, Fe and Ni. CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, 47, 92–99. https://doi.org/10.1016/j.calphad.2014.06.008 ( reposiTUm)

Shan, Y., Svoboda, J., Fischer, F. D., & Kozeschnik, E. (2014). Determination of Substitutional-Interstitial Interaction from Chemical. Advanced Materials Research, VOL 922(922), 645–650. http://hdl.handle.net/20.500.12708/158008 ( reposiTUm)

Svoboda, J., Shan, Y. V., Kozeschnik, E., & Fischer, F. D. (2014). Determination of depths of multiple traps for interstitials and their influence on diffusion kinetics. Modelling and Simulation in Materials Science and Engineering, 22(6), 065015. https://doi.org/10.1088/0965-0393/22/6/065015 ( reposiTUm)

Lang, P., & Kozeschnik, E. (2013). Modellierung und Simulation zur Qualitätsverbesserung und Effizienzsteigerung. AluReport, 02.2013, 8–9. http://hdl.handle.net/20.500.12708/155778 ( reposiTUm)

Farren, J. D., Hunter, A. H., Dupont, J. N., Robino, C. V., Kozeschnik, E., & Seidman, D. N. (2013). Microstructural Evolution and Mechanical Properties of Simulated Heat-Affected Zones in an Iron-Copper Based Multicomponent Steel. WELDING JOURNAL, 92, 140–147. http://hdl.handle.net/20.500.12708/155851 ( reposiTUm)

Appel, F., Herrmann, D., Fischer, F. D., Svoboda, J., & Kozeschnik, E. (2013). Role of vacancies in work hardening and fatigue of TiAl alloys. International Journal of Plasticity, 42, 83–100. https://doi.org/10.1016/j.ijplas.2012.10.001 ( reposiTUm)

Lang, P., Lang, M. C., Falahati, A., & Kozeschnik, E. (2013). The Effect of Si on the Precipitation Behaviour in Al-Mg-Si Alloys Studied by Thermo-kinetic Simulation and DSC Experiments. BHM Berg- Und Hüttenmännische Monatshefte, 159(3), 116–121. https://doi.org/10.1007/s00501-013-0211-3 ( reposiTUm)

Zamberger, S., Wojcik, T., Klarner, J., Klösch, G., Schifferl, H., & Kozeschnik, E. (2013). Computational and Experimental Analysis of Carbo-Nitride Precipitation in Tempered Martensite. Steel Research International, 84(1), 20–30. http://hdl.handle.net/20.500.12708/155710 ( reposiTUm)

Povoden-Karadeniz, E., Lang, P., Warczok, P., Falahati, A., Jun, W., & Kozeschnik, E. (2013). CALPHAD modeling of metastable phases in the Al-Mg-Si system. CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, 43(12), 94–104. http://hdl.handle.net/20.500.12708/155675 ( reposiTUm)

Povoden-Karadeniz, E., Cirstea, D. C., Lang, P., Wojcik, T., & Kozeschnik, E. (2013). Thermodynamics of Ti-Ni shape memory alloys. CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, 41, 128–139. https://doi.org/10.1016/j.calphad.2013.02.004 ( reposiTUm)

Fischer, F. D., Svoboda, J., & Kozeschnik, E. (2013). Interstitial diffusion in systems with multiple sorts of traps. Modelling and Simulation in Materials Science and Engineering, 21, 025008–025020. http://hdl.handle.net/20.500.12708/155853 ( reposiTUm)

Svoboda, J., Shan, Y. V., Kozeschnik, E., & Fischer, F. D. (2013). Determination of depths of traps for interstitials from thermodynamic data: a new view on carbon trapping and diffusion. Modelling and Simulation in Materials Science and Engineering, 21(6), 065012. https://doi.org/10.1088/0965-0393/21/6/065012 ( reposiTUm)

Sonderegger, B., & Kozeschnik, E. (2012). Particle strengthening in fcc crystals with prolate and oblate precipitates. Scripta Materialia, 66(1), 52–55. https://doi.org/10.1016/j.scriptamat.2011.10.003 ( reposiTUm)

Jung, J., Kozeschnik, E., Han, S. H., & De Cooman, B. C. (2012). Analysis of the Mechanical Properties of N-Added CMn Structural Steel by the Impulse Internal Friction Technique. Metallurgical and Materials Transactions A, 43(12), 4587–4600. https://doi.org/10.1007/s11661-012-1279-1 ( reposiTUm)

Zamberger, S., Pudar, M., Spiradek-Hahn, K., Reischl, M., & Kozeschnik, E. (2012). Numerical simulation of the evolution of primary and secondary Nb(CN), Ti(CN) and AlN in Nb-microalloyed steel during continuous casting. International Journal of Materials Research, 103(6), 680–687. https://doi.org/10.3139/146.110688 ( reposiTUm)

Radis, R., & Kozeschnik, E. (2012). Numerical simulation of NbC precipitation in microalloyed steel. Modelling and Simulation in Materials Science and Engineering, 20(5), 055010. https://doi.org/10.1088/0965-0393/20/5/055010 ( reposiTUm)

Radis, R., Schlacher, C., Kozeschnik, E., Mayr, P., Enzinger, N., Schröttner, H., & Sommitsch, C. (2012). Loss of Ductility Caused by AlN Precipitation in Hadfield Steel. Metallurgical and Materials Transactions A, 43(4), 1132–1139. https://doi.org/10.1007/s11661-011-0968-5 ( reposiTUm)

Farren, J. D., Hunter, A. H., Dupont, J. N., Seidman, D. N., Robino, C. V., & Kozeschnik, E. (2012). Microstructural Evolution and Mechanical Properties of Fusion Welds in an Iron-Copper-Based Multicomponent Steel. Metallurgical and Materials Transactions A, 43(11), 4155–4170. https://doi.org/10.1007/s11661-012-1249-7 ( reposiTUm)

Povoden-Karadeniz, E., & Kozeschnik, E. (2012). Simulation of Precipitation Kinetics and Precipitation Strengthening of B2-precipitates in Martensitic PH 13-8 Mo Steel. ISIJ International, 52(4), 610–615. https://doi.org/10.2355/isijinternational.52.610 ( reposiTUm)

Warczok, P., Ženíšek, J., & Kozeschnik, E. (2012). Atomistic and continuums modeling of cluster migration and coagulation in precipitation reactions. Computational Materials Science, 60, 59–65. https://doi.org/10.1016/j.commatsci.2012.02.033 ( reposiTUm)

Radis, R., Schwarz, S., Zamberger, S., & Kozeschnik, E. (2011). AlN Precipitation During Isothermal Annealing of Ultra Low Carbon Steel. Steel Research International, 82(8), 905–910. http://hdl.handle.net/20.500.12708/162702 ( reposiTUm)

Svoboda, J., Gamsjäger, E., Fischer, F. D., Liu, Y., & Kozeschnik, E. (2011). Diffusion processes in a migrating interface: The thick-interface model. Acta Materialia, 59(12), 4775–4786. https://doi.org/10.1016/j.actamat.2011.04.020 ( reposiTUm)

Fischer, F. D., Svoboda, J., Appel, F., & Kozeschnik, E. (2011). Modeling of excess vacancy annihilation at different types of sinks. Acta Materialia, 59(9), 3463–3472. https://doi.org/10.1016/j.actamat.2011.02.020 ( reposiTUm)

Konovalov, S., Prahl, U., Kohlmann, R., Kozeschnik, E., & Bleck, W. (2011). Precipitation development simulation of high-temperature carburization along the process chain. HTM Journal of Heat Treatment and Materials, 66(4), 217–229. https://doi.org/10.3139/105.110110 ( reposiTUm)

Sonderegger, B., Holzer, I., Kozeschnik, E., & Sommitsch, C. (2011). Particle distance distributions and their effect on precipitation strengthening. Computer Methods in Materials Science, 11(1), 148–153. http://hdl.handle.net/20.500.12708/162697 ( reposiTUm)

Warczok, P., Reith, D., Schober, M., Leitner, H., Podloucky, R., & Kozeschnik, E. (2011). Investigation of Cu precipitation in bcc-Fe - Comparison of numerical analysis with experiment. International Journal of Materials Research, 102(6), 709–716. https://doi.org/10.3139/146.110524 ( reposiTUm)

Anghelina, D., Kienreich, R., Zamberger, S., Zamberger, J., Kozeschnik, E., & Schneider, R. (2010). Kinetics and control of scaling for reduced surface decarburization of spring steels. Metalurgia International, 15, 5–8. http://hdl.handle.net/20.500.12708/168093 ( reposiTUm)

Burzic, D., Zamberger, J., & Kozeschnik, E. (2010). Non-destructive evaluation of decarburization of spring steel using electromagnetic measurement. Nondestructive Testing and Evaluation, 43, 446–450. http://hdl.handle.net/20.500.12708/168095 ( reposiTUm)

Holzer, I., & Kozeschnik, E. (2010). Simulation of copper precipitation in fe-cu alloys. Materials Science Forum, 638–642, 2579–2584. http://hdl.handle.net/20.500.12708/168082 ( reposiTUm)

Sonderegger, B., Holzer, I., & Kozeschnik, E. (2010). Calculation of energies of coherent interfaces and application to the nucleation, growth and coarsening of precipitates. Materials Science Forum, 638–642, 2730–2735. http://hdl.handle.net/20.500.12708/168084 ( reposiTUm)

Maalekian, M., & Kozeschnik, E. (2010). Modeling the effect of stress and plastic strain on martensite transformation. Materials Science Forum, 638–642, 2634–2639. http://hdl.handle.net/20.500.12708/168083 ( reposiTUm)

Radis, R., & Kozeschnik, E. (2010). Precipitation Kinetics of Aluminium Nitride in Austenite in Microalloyed HSLA Steels. Materials Science Forum, 636–637, 605–611. https://doi.org/10.4028/www.scientific.net/msf.636-637.605 ( reposiTUm)

Radis, R., Zickler, G. A., Stockinger, M., Sommitsch, C., & Kozeschnik, E. (2010). Interaction of the Precipitation Kinetics of Delta and Gamma’ Phases in Nickel-Base Superalloy ATI Allvac 718 Plus. Materials Science Forum, 638–642, 2712–2717. https://doi.org/10.4028/www.scientific.net/msf.638-642.2712 ( reposiTUm)

Holzer, I., Kozeschnik, E., & Cerjak, H. (2010). New approach to predict the long-term creep behaviour and evolution of precipitate back-stress of 9-12% chromium steels. Transactions of the Indian Institute of Metals, 63, 137–143. http://hdl.handle.net/20.500.12708/168096 ( reposiTUm)

Maalekian, M., & Kozeschnik, E. (2010). Modeling mechanical effects on promotion and retardation of martensitic transformation. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 528, 1318–1325. http://hdl.handle.net/20.500.12708/168092 ( reposiTUm)

Sonderegger, B., & Kozeschnik, E. (2010). Interfacial energy of diffuse phase boundaries in the generalized broken-bond approach. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 41, 3262–3269. http://hdl.handle.net/20.500.12708/168089 ( reposiTUm)

Shim, J.-H., Kozeschnik, E., Jung, W.-S., Lee, S.-C., Kim, D.-I., Suh, J.-Y., Lee, Y.-S., & Cho, Y. W. (2010). Numerical simulation of long-term precipitate evolution in austenitic heat-resistant steels. CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, 34(1), 105–112. https://doi.org/10.1016/j.calphad.2010.01.001 ( reposiTUm)

Holzer, I., & Kozeschnik, E. (2010). Computer simulation of the yield strength evolution in Cu-precipitation strengthened ferritic steel. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 527, 3546–3551. http://hdl.handle.net/20.500.12708/168087 ( reposiTUm)

Radis, R., & Kozeschnik, E. (2010). Concurrent Precipitation of AlN and VN in Microalloyed Steel. Steel Research International, 81(8), 681–685. https://doi.org/10.1002/srin.201000037 ( reposiTUm)

Falahati, A., Povoden-Karadeniz, E., Lang, P., Warczok, P., & Kozeschnik, E. (2010). Thermo-kinetic computer simulation of differential scanning calorimetry curves of AlMgSi alloys. International Journal of Materials Research, 101(9), 1089–1096. https://doi.org/10.3139/146.110396 ( reposiTUm)

Schnitzer, R., Radis, R., Nöhrer, M., Schober, M., Hochfellner, R., Zinner, S., Povoden-Karadeniz, E., Kozeschnik, E., & Leitner, H. (2010). Reverted Austenite in PH 13-8 Mo Maraging Steels. MATERIALS CHEMISTRY AND PHYSICS, 122(1), 138–145. https://doi.org/10.1016/j.matchemphys.2010.02.058 ( reposiTUm)

Zickler, G. A., Radis, R., Schnitzer, R., Kozeschnik, E., Stockinger, M., & Leitner, H. (2010). The Precipitation Behavior of Superalloy ATI Allvac®718Plus. Advanced Engineering Materials, 12(3), 176–183. https://doi.org/10.1002/adem.200900282 ( reposiTUm)

Radis, R., & Kozeschnik, E. (2010). Kinetics of AlN Precipitation in Microalloyed Steel. Modelling and Simulation in Materials Science and Engineering, 18(5), 055003. https://doi.org/10.1088/0965-0393/18/5/055003 ( reposiTUm)

Pudar, M., Zamberger, S., Spiradek-Hahn, K., Radis, R., & Kozeschnik, E. (2010). Computational Analysis of Precipitation during Continuous Casting of Microalloyed Steel. Steel Research International, 81(5), 372–380. https://doi.org/10.1002/srin.201000021 ( reposiTUm)

Sonderegger, B., Kozeschnik, E., Leitner, H., Clemens, H., Svoboda, J., Fischer, F. D., & Staron, P. (2010). Kinetics of Precipitation in a Complex Hot-Work Tool Steel. Steel Research International, 81, 64–73. http://hdl.handle.net/20.500.12708/168086 ( reposiTUm)

Kozeschnik, E., Svoboda, J., Radis, R., & Fischer, F. D. (2010). Mean-Field Model for the Growth and Coarsening of Stoichiometric Precipitates at Grain Boundaries. Modelling and Simulation in Materials Science and Engineering, 18(1), 015011. https://doi.org/10.1088/0965-0393/18/1/015011 ( reposiTUm)

Sonderegger, B., & Kozeschnik, E. (2009). Generalized nearest-neighbor broken-bond analysis of randomly oriented interfaces in multi-component fcc and bcc structures. Metallurgical and Materials Transactions A, 40(3), 499–510. https://doi.org/10.1007/s11661-008-9752-6 ( reposiTUm)

Sonderegger, B., & Kozeschnik, E. (2009). Size dependence of the interfacial energy in the generalized nearest-neighbor broken-bond approach. Scripta Materialia, 60(8), 635–638. https://doi.org/10.1016/j.scriptamat.2008.12.025 ( reposiTUm)

Radis, R., Schaffer, M., Albu, M., Kothleitner, G., Pölt, P., & Kozeschnik, E. (2009). Multimodal size distributions of γ’ precipitates during continuous cooling of UDIMET 720 Li. Acta Materialia, 57(19), 5739–5747. https://doi.org/10.1016/j.actamat.2009.08.002 ( reposiTUm)

Li, D., Anghelina, D., Burzic, D., Zamberger, J., Kienreich, R., Schifferl, H., Krieger, W., & Kozeschnik, E. (2009). Investigation of Decarburization in Spring Steel Production Process - Part I: Experiments. Steel Research International, 80(4), 298–303. https://doi.org/10.2374/SRI08SP069 ( reposiTUm)

Li, D., Anghelina, D., Burzic, D., Krieger, W., & Kozeschnik, E. (2009). Investigation of Decarburization in Spring Steel Production Process - Part II: Simulation. Steel Research International, 80(4), 304–310. https://doi.org/10.2374/SRI08SP070 ( reposiTUm)

Holzer, I., & Kozeschnik, E. (2008). Predicted precipitate back-stress and creep rupture strength of the advanced 9-12 % Cr steel COST E2. International Journal of Materials Research, 99(4), 416–421. http://hdl.handle.net/20.500.12708/170744 ( reposiTUm)

Kozeschnik, E. (2008). Thermodynamic prediction of the equilibrium chemical composition of critical nuclei: Bcc Cu precipitation in alpha-Fe. Scripta Materialia, 59, 1018–1021. http://hdl.handle.net/20.500.12708/170749 ( reposiTUm)

Maalekian, M., & Kozeschnik, E. (2008). A thermodynamic model for carbon trapping in lattice defects. Calphad, 32, 650–654. http://hdl.handle.net/20.500.12708/170892 ( reposiTUm)

Lazar, P., Podloucky, R., Kozeschnik, E., & Redinger, J. (2008). Density functional theory study of ternary V-Cr-N compounds. Physical Review B, 78, 1342021–1342028. http://hdl.handle.net/20.500.12708/170489 ( reposiTUm)

Sonderegger, B., Kozeschnik, E., Leitner, H., Clemens, H., Svoboda, J., & Fischer, F. D. (2008). Computational analysis of the precipitation kinetics in a complex tool steel. International Journal of Materials Research, 99(4), 410–415. http://hdl.handle.net/20.500.12708/170745 ( reposiTUm)

Zenisek, J., Svoboda, J., Kozeschnik, E., & Fischer, F. D. (2008). A combined cluster dynamic/kinetic Monte Carlo model for precipitate nucleation in interstitial/substitutional alloys. Modelling and Simulation in Materials Science and Engineering, 16(7), 075005. https://doi.org/10.1088/0965-0393/16/7/075005 ( reposiTUm)

Conference Proceedings Contributions

Retzl, P., & Kozeschnik, E. (2023). Simulation study of carbide formation and dissolution in upper/lower bainite. In THERMEC ’2023 Abstract Book (pp. 479–479). ( reposiTUm)

Kahlenberg, R., Wojcik, T., Falkinger, G., Krejci, A. L., Milkereit, B., & Kozeschnik, E. (2023). Observation of β-Mg2Si formation during continuous heating in AA6061. In THERMEC 2023 - International Conference on Processing & Manufacturing of advanced Materials : Abstract Book (pp. 288–289). ( reposiTUm)

Führer, M., Zamberger, S., Kahlenberg, R., Haslberger, P., Kozeschnik, E., & Povoden-Karadeniz, E. (2023). Modeling static recrystallization in low-carbon steel via torsion testing. In THERMEC’2023 - International Conference on Processing & Manufacturing of advanced Materials : Abstract book (pp. 206–206). http://hdl.handle.net/20.500.12708/193986 ( reposiTUm)

Bielik, M., Neubauer, E., Kitzmantel, M., Neubauer, I., & Kozeschnik, E. (2023). A simulation approach for series production of plasma-based additive manufacturing of Ti-6Al-4V components. In C. Sommitsch, N. Enzinger, & P. Mayr (Eds.), Mathematical Modelling of Weld Phenomena 13 (pp. 361–393). Verlag der Technischen Universität Graz. https://doi.org/10.3217/978-3-85125-968-1-20 ( reposiTUm)

Shan, Y., Viernstein, B., & Kozeschnik, E. (2023). Microstructure evolution subroutine for finite element analysis. In C. Sommitsch, N. Enzinger, & P. Mayr (Eds.), Mathematical Modelling of Weld Phenomena 13 (pp. 407–412). Verlag der Technischen Universität Graz. https://doi.org/10.3217/978-3-85125-968-1 ( reposiTUm)

Viernstein, B., & Kozeschnik, E. (2021). Computational analysis of deformation maps. In The Metal Forming Conference MEFORM 2020 (pp. 34–36). TU Bergakademie Freiberg. http://hdl.handle.net/20.500.12708/68197 ( reposiTUm)

Estermann, P., Six, J., Ilie, S., & Kozeschnik, E. (2021). Simulation and validation of the mechanism responsible for the right flank of the second ductility minimum. In proceedings of the 10th european conference on continuous casting (p. 10). http://hdl.handle.net/20.500.12708/68292 ( reposiTUm)

Viernstein, B., Schumacher, P., Milkereit, B., & Kozeschnik, E. (2020). State Parameter-Based Simulation of Temperature- and Strain Rate Dependent Flow Curves of Al-Alloys. In The Minerals, Metals & Materials Series (pp. 267–271). Springer. https://doi.org/10.1007/978-3-030-36408-3_38 ( reposiTUm)

Siroky, G., Melinc, D., Magnien, J., Kozeschnik, E., Kieslinger, D., Kraker, E., & Ecker, W. (2020). Healing solders: A numerical investigation of damage-healing experiments. In 2020 21st International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE). 21st International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE), Virtuell, Unknown. https://doi.org/10.1109/eurosime48426.2020.9152751 ( reposiTUm)

Zügner, D., Holly, S., Ernst, W., Schnitzer, R., & Kozeschnik, E. (2019). Computational analysis of the yield stress of ultra-high strength all-weld metals. In C. Sommitsch, N. Enzinger, & P. Mayr (Eds.), Mathematical Modelling of Weld Phenomena 12 (pp. 199–217). Verlag der Technischen Universität Graz. https://doi.org/10.3217/978-3-85125-615-4-13 ( reposiTUm)

Siroky, G., Kraker, E., Magnien, J., Kozeschnik, E., Kieslinger, D., & Ecker, W. (2019). Numerical study on local effects of composition and geometry in self-healing solders. In 20th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (pp. 21–37). http://hdl.handle.net/20.500.12708/68196 ( reposiTUm)

Kreyca, J., & Kozeschnik, E. (2017). Dissolution of hardening phases during deformation in an A6061 Aluminium alloy. In J. Allwood (Ed.), International Conference on the Technology of Plasticity, ICTP 2017, 17-22 September 2017, Cambridge, United Kingdom (pp. 37–41). Elsevier BV. https://doi.org/10.1016/j.proeng.2017.10.734 ( reposiTUm)

Redermeier, A., & Kozeschnik, E. (2017). Bridging the Gap between Ab Initio and Large Scale Studies - A Monte Carlo Study of Cu Precipitation in Fe. In THERMEC 2016 (pp. 1564–1569). Trans Tech Publications Inc. https://doi.org/10.4028/www.scientific.net/msf.879.1564 ( reposiTUm)

Qin, L., Redermeier, A., & Kozeschnik, E. (2017). A Statistical Methodology to Reconstruct Nucleation Pathways in the Fe-Cu System. In THERMEC 2016 (pp. 1529–1534). Trans Tech Publications Inc. https://doi.org/10.4028/www.scientific.net/msf.879.1529 ( reposiTUm)

Wojcik, T., & Kozeschnik, E. (2017). Influence of NbC-Precipitation on Hot Ductility in Microalloyed Steel - TEM Study and Thermokinetic Modeling. In THERMEC 2016 (pp. 2107–2112). Trans Tech Publications Inc. https://doi.org/10.4028/www.scientific.net/msf.879.2107 ( reposiTUm)

Cirstea, D., Povoden-Karadeniz, E., Kozeschnik, E., Lungu, M., Lang, P., Balagurov, A., & Cirstea, V. (2017). Thermokinetic Simulation of Precipitation in NiTi Shape Memory Alloys. In IOP Conference Series: Materials Science and Engineering (p. 012057). IOP Publishing. https://doi.org/10.1088/1757-899x/209/1/012057 ( reposiTUm)

Povoden-Karadeniz, E., & Kozeschnik, E. (2017). Coupling of Computational Thermodynamics with Kinetic Models for Predictive Simulations of Materials Properties. In C. Sommitsch (Ed.), THERMEC 2016 (pp. 1513–1518). Trans Tech Publications Inc. https://doi.org/10.4028/www.scientific.net/msf.879.1513 ( reposiTUm)

Wei, W. W., Povoden-Karadeniz, E., & Kozeschnik, E. (2017). Saturation of Deformation Twinning in Magnesium Alloys. In C. Sommitsch (Ed.), THERMEC 2016 (pp. 2084–2087). Trans Tech Publications Inc. https://doi.org/10.4028/www.scientific.net/msf.879.2084 ( reposiTUm)

Kreyca, J., Falahati, A., & Kozeschnik, E. (2017). Modelling Yield Strength in an A6061 Aluminium Alloy. In THERMEC 2016 (pp. 1014–1018). Trans Tech Publications Inc. https://doi.org/10.4028/www.scientific.net/msf.879.1014 ( reposiTUm)

Buken, H., Zamberger, S., & Kozeschnik, E. (2017). A model for the influence of micro-alloying elements on static recrystallization of austenite. In E. Holm, S. Farjami, P. Manohar, G. Rohrer, A. Rollett, D. Srolovitz, & H. Weiland (Eds.), Proceedings of the 6th International Conference on Recrystallization and Grain Growth (ReX&GG 2016) (pp. 113–118). Wiley. http://hdl.handle.net/20.500.12708/67424 ( reposiTUm)

Zamberger, S., Lang, P., & Kozeschnik, E. (2016). Modeling the influence of atomic traps on H diffusion and solubility in steel. In Proc. 11th Int. Seminar on Numerical Analysis of Weldability (pp. 423–433). http://hdl.handle.net/20.500.12708/67348 ( reposiTUm)

Rath, M., Povoden-Karadeniz, E., & Kozeschnik, E. (2016). Precipitation kinetic modeling of the new eta-phase Ni6AlNb in Ni-base superalloys. In Superalloys 2016: Proceedings of the 13th International Symposium on Superalloys (pp. 97–105). TMS (The Minerals, Metals & Materials Society). http://hdl.handle.net/20.500.12708/67506 ( reposiTUm)

Povoden-Karadeniz, A., Cirstea, D. C., & Kozeschnik, E. (2016). Prediction of precipitate evolution and martensite transformation in Ti-Ni-Cu shape memory alloys by computational thermodynamics. In IOP Conference Series: Materials Science and Engineering (p. 012038). IOP Publishing. https://doi.org/10.1088/1757-899x/123/1/012038 ( reposiTUm)

Weisz, T., Buken, H., Lukavsky, D., Falahati, A., Ebner, T., & Kozeschnik, E. (2016). Rekristallisation in 6xxx Legierungen: Experiment und Modellierung. In Tagungsband 9. Ranshofener Leichtmetalltage (pp. 89–98). http://hdl.handle.net/20.500.12708/67522 ( reposiTUm)

Buken, H., Sherstnev, P., & Kozeschnik, E. (2016). Simultaneous Precipitation and Recrystallization during Hot Deformation of Ti, Nb and V Microalloyed Steel. In THERMEC 2016 (pp. 2463–2467). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/msf.879.2463 ( reposiTUm)

Kreyca, J. F., Falahati, A., & Kozeschnik, E. (2016). Experimental characterisation and modelling of deformation- induced microstructure in an A6061 aluminium alloy. In IOP Conference Series: Materials Science and Engineering (p. 012017). IOP Conference Series: Materials Science and Engineering. https://doi.org/10.1088/1757-899x/119/1/012017 ( reposiTUm)

Povoden-Karadeniz, E., Hadke, S. S., & Kozeschnik, E. (2015). Thermodynamic modeling and precipitation simulations of detrimental phases for long-term applications of austenitic stainless steel. In Proceedings of 8th European Stainless Steel & Duplex Stainless Steel Conference. 8th European Stainless Steel Conference, Graz, Austria. https://doi.org/10.13140/RG.2.1.2845.9928 ( reposiTUm)

Macioł, P., Bureau, R., Poletti, C., Sommitsch, C., Warczok, P., & Kozeschnik, E. (2015). Agile multiscale modelling of the thermo-mechanical processing of an aluminium alloy. In A. Ofenheimer, C. Poletti, D. Schalk-Kitting, & C. Sommitsch (Eds.), Material Forming ESAFORM 2015. Trans Tech Publications. http://hdl.handle.net/20.500.12708/67334 ( reposiTUm)

Weisz, T., Warczok, P., Ebner, T., Falahati, A., & Kozeschnik, E. (2015). Simulation of Natural Aging in Al-Mg-Si Alloys. In Light Metals Technology 2015 (pp. 468–473). Trans Tech Publications. https://doi.org/10.4028/www.scientific.net/msf.828-829.468 ( reposiTUm)

Kreyca, J., & Kozeschnik, E. (2015). Vorhersage von Fließkurven für Aluminium-Legierungen - Erwartung und Wirklichkeit. In Simufact 16. Roundtable (pp. 1–5). http://hdl.handle.net/20.500.12708/67346 ( reposiTUm)

Kreyca, J., Falahati, A., & Kozeschnik, E. (2015). Modelling microstructure evolution in polycrystalline aluminium - Comparison of one and multi-parameter models with experiment. In Materials Forming ESAFORM 2015 (pp. 587–591). scientific.net. http://hdl.handle.net/20.500.12708/67340 ( reposiTUm)

Beyer, U., Neubauer, I., Kreyca, J., & Kozeschnik, E. (2015). Virtual Joining Factory - Integration of microstructure evolution in the manufacturing process chain simulation. In Material Forming ESAFORM 2015 (pp. 1325–1330). http://hdl.handle.net/20.500.12708/67342 ( reposiTUm)

Kreyca, J., Falahati, A., & Kozeschnik, E. (2015). Microstructure and flow stress modelling during plastic deformation of an aluminum alloy type A6061. In Materials Today: Proceedings (pp. S107–S112). Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2015.05.026 ( reposiTUm)

Buken, H., Sherstnev, P., & Kozeschnik, E. (2015). Modeling The Interaction Between Precipitation And Static Recrystallization In Micro-Alloyed Steel. In Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015 (pp. 913–914). http://hdl.handle.net/20.500.12708/67357 ( reposiTUm)

Mayer, W., Shan, Y., Povoden-Karadeniz, E., & Kozeschnik, E. (2015). A model for the disorder → order transformation during Fe3C precipitation in martensite. In Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015 (pp. 283–284). http://hdl.handle.net/20.500.12708/67308 ( reposiTUm)

Shan, Y., Svoboda, J., Fischer, F. D., & Kozeschnik, E. (2015). Thermo-kinetic modeling of Mg-Si couple formation as a precursor to precipitation in Al-Mg-Si. In Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015 (pp. 883–884). http://hdl.handle.net/20.500.12708/67304 ( reposiTUm)

Lückl, M., Ilie, S., Six, J., & Kozeschnik, E. (2015). Surface Microstructure Control Cooling at Continuous Casting. In Advances in Metallurgy of Long and Forged Products (pp. 367–373). AIST. http://hdl.handle.net/20.500.12708/67281 ( reposiTUm)

Raeisinia, B., Piroteala, T., Kozeschnik, E., Warczok, P., & Nolan, P. (2015). Bringing the science of precipitation in aluminum alloys to the shop floor. In TMS 2015 Supplement Proceedings. TMS 2015, Orlando, United States of America (the). Wiley. http://hdl.handle.net/20.500.12708/67350 ( reposiTUm)

Mayer, W., Sackl, S., Shan, Y. V., Primig, S., & Kozeschnik, E. (2015). Evolution of precipitates and martensite substructure during continuous heat treatment. In Materials Today: Proceedings (pp. S619–S622). Materials Today: Proceedings (2015). https://doi.org/10.1016/j.matpr.2015.07.360 ( reposiTUm)

Großeiber, S., Gusenbauer, C., Ilie, S., Kozeschnik, E., & Requena, G. (2014). Damage initiation during hot deformation of a continuously cast steel. In Proceedings of Conference on Industrial Computed Tomography (iCT 2014)) (pp. 139–140). http://hdl.handle.net/20.500.12708/67178 ( reposiTUm)

Stechauner, G., & Kozeschnik, E. (2014). Simulation of Cu Precipitation in the Fe-Cu Binary System. In Advanced Materials Research (pp. 728–733). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/amr.922.728 ( reposiTUm)

Große-Heilmann, N., Zylla, I.-M., Kozeschnik, E., & Peters, A. (2014). High Strength TRIP Steels processed by Two-step Quenching & Partitioning. In 4th International Conference on Steels in Cars and Trucks (pp. 731–737). http://hdl.handle.net/20.500.12708/67135 ( reposiTUm)

Beyer, U., Rath, M., & Kozeschnik, E. (2014). Virtuelle Fabrik - Integration von Mikrostruktureigenschaften in die Umformsimulation zur Herstellung von Werkstoffverbunden. In MEFORM 2014: Production and Processing of Cladded Materials and Metal Matrix Composites (pp. 70–80). TU Bergakad. http://hdl.handle.net/20.500.12708/67064 ( reposiTUm)

Wojcik, T., & Kozeschnik, E. (2014). Shell-wise growth of (Nb,Ti)(C,N) precipitates during cyclic cooling of microalloyed steel. In 18th International Microscopy Congress (p. 2877). http://hdl.handle.net/20.500.12708/67337 ( reposiTUm)

Umlaub, K., Reichelt, S., Schmidtchen, M., & Kozeschnik, E. (2014). Herstellung von Schweißverbindungen mittels Bimetallstreifen. In MEFORM 2014: production and processing of clad materials and metal matrix composites. MEFORM 2014, Altenberg, Austria. TU Bergakad. http://hdl.handle.net/20.500.12708/67338 ( reposiTUm)

Mas, F., Shan, Y., Tassin, C., Kozeschnik, E., Roch, F., Todeschini, P., & Brechet, Y. (2014). Coupled carbon diffusion and precipitation in a dissimilar steel weld: Modelling and Characterization. In TMS 2014 143rd Annual Meeting & Exhibition, Annual Meeting Supplemental Proceedings. TMS 2014, San Diego, United States of America (the). Wiley. http://hdl.handle.net/20.500.12708/67339 ( reposiTUm)

Großeiber, S., Gusenbauer, C., Ilie, S., Requena, G. C., & Kozeschnik, E. (2014). Relevance of Hot Ductility Tests to Crack Sensitivity during Continuous Casting of Steel. In Advanced Materials Research (pp. 201–206). Advanced Materials Research. https://doi.org/10.4028/www.scientific.net/amr.922.201 ( reposiTUm)

Grosse-Heilmann, N., Zylla, I. M., Kozeschnik, E., & Peters, A. (2014). Two-Step Quenching & Partitioning of 42SiCrB Steel. In THERMEC 2013 (pp. 738–743). Materials Science Forum. https://doi.org/10.4028/www.scientific.net/msf.783-786.738 ( reposiTUm)

Großeiber, S., Rath, M., & Kozeschnik, E. (2013). Modeling of the interaction between precipitate formation and forming - A thermo-kinetic approach. In Simulation von Umformprozessen - MEFORM 2013 (pp. 69–78). http://hdl.handle.net/20.500.12708/66967 ( reposiTUm)

Rath, M., & Kozeschnik, E. (2013). Coupled Grain Growth and Precipitation Modeling in Multi-Phase Systems. In Recrystallization and Grain Growth V (pp. 357–360). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/msf.753.357 ( reposiTUm)

Povoden-Karadeniz, E., Lang, P., Öksüz, K. I., Jun, W., Rafiezadeh, S., Falahati, A., & Kozeschnik, E. (2013). Thermodynamics-Integrated Simulation of Precipitate Evolution in Al-Mg-Si-Alloys. In I. Stone & B. McKay (Eds.), Light Metals Technology 2013 (pp. 476–480). Materials Science Forum. https://doi.org/10.4028/www.scientific.net/msf.765.476 ( reposiTUm)

Lückl, M., Ilie, S., Six, J., & Kozeschnik, E. (2013). Surface Microstructure Control during Continuous Casting of Micro-Alloyed Steel. In Materials Science & Technology 2013 (CDROM) (pp. 433–438). http://hdl.handle.net/20.500.12708/66870 ( reposiTUm)

Shan, Y. V., Svoboda, J., Fischer, F. D., & Kozeschnik, E. (2013). Determination of Substitutional-Interstitial Interaction from Chemical Potentials of Interstitials in the Steel Matrix. In Advanced Materials Research (pp. 645–650). Advanced Materials Research. https://doi.org/10.4028/www.scientific.net/amr.922.645 ( reposiTUm)

Lang, P., Povoden-Karadeniz, E., Mayer, W., Falahati, A., & Kozeschnik, E. (2013). The bustling nature of vacancies in Al alloys. In The 8th Pacific Rim International Congress on Advanced Materials and Processing (pp. 3181–3188). Wiley. http://hdl.handle.net/20.500.12708/66889 ( reposiTUm)

Jung, J. H., Kozeschnik, E., Han, S. H., & De Cooman, B. C. (2012). Static Strain Aging in Fe-Mn-N Alloys Investigated by Impulse Excitation Internal Friction Analysis. In Internal Friction and Mechanical Spectroscopy (pp. 203–208). Solid State Phenomena. https://doi.org/10.4028/www.scientific.net/ssp.184.203 ( reposiTUm)

Großeiber, S., Requena, G., Kozeschnik, E., Gusenbauer, C., & Ilie, S. (2012). Correlation Between Hot Ductility and Damage in Microalloyed Steel Slabs. In Proceedings of Conference on Industrial Computed Tomography (iCT 2012). iCT 2012 Wels, Wels, Austria. http://hdl.handle.net/20.500.12708/66659 ( reposiTUm)

Lang, P., Mohn, P., Falahati, A., & Kozeschnik, E. (2012). Ab initio simulations of vacancy-solute clusters in Al-Mg-Si and Al-Zn-mg alloys. In 13th International Conference on Aluminium Alloys (pp. 273–277). Wiley. http://hdl.handle.net/20.500.12708/66661 ( reposiTUm)

Sherstnev, P., Lang, P., & Kozeschnik, E. (2012). Treatment of simultaneous deformation and solid-state precipitation in thermo-kinetic calculations. In CD-ROM Proceedings of the 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012), September 10-14, 2012, Vienna, Austria (p. 8). http://hdl.handle.net/20.500.12708/66665 ( reposiTUm)

Bleicher, F., Lechner, C., Habersohn, C., Kozeschnik, E., Adjassoho, B., & Kaminski, H. (2012). Mechanism of surface modification using machine hammer peening technology. In CIRP Annals-Manufacturing Technology (pp. 375–378). CIRP Annals-Manufacturing Technology. http://hdl.handle.net/20.500.12708/66617 ( reposiTUm)

Adjassoho, B., Kozeschnik, E., Lechner, C., Bleicher, F., Gössinger, S., & Bauer, C. (2012). Induction of residual stresses and increase of surface hardness by Machine Hammer Peening technology. In B. Katalinic (Ed.), Annals of DAAAM for 2012&Proceeding of the 23rd International DAAAM Symposium (pp. 697–702). Annals of DAAAM for 2012 & Proceeding of the 23rd International DAAAM Symposium/DAAAM International Vienna. http://hdl.handle.net/20.500.12708/66640 ( reposiTUm)

Kozeschnik, E., Adjassoho, B., Lechner, C., Habersohn, C., Bleicher, F., Gössinger, S., & Bauer, C. (2012). Controlled Surface Treatment With Machine Hammer Peening. In METAL 2013 (p. 6). http://hdl.handle.net/20.500.12708/66971 ( reposiTUm)

Große-Heilmann, N., Zylla, I.-M., Kozeschnik, E., & Peters, A. (2012). One-Step Q\&P of seamless tubes made from 42SiCrB. In MS&T ’12: Materials Science & Technology 2012 Conference & Exhibition (Conference Proceedings) (pp. 929–936). Wiley. http://hdl.handle.net/20.500.12708/66866 ( reposiTUm)

Zamberger, S., & Kozeschnik, E. (2012). Carbo-Nitride Precipitation in Tempered Martensite - Computer Simulation and Experiment. In THERMEC 2011 (pp. 1586–1591). Materials Science Forum / Trans Tech Publications. https://doi.org/10.4028/www.scientific.net/msf.706-709.1586 ( reposiTUm)

Sonderegger, B., Kozeschnik, E., & Sommitsch, C. (2012). Modeling Particle Distances of Coherent Prolate- and Oblate-Shaped Precipitates in bcc Systems. In THERMEC 2011 (pp. 1521–1526). Materials Science Forum / Trans Tech Publications. https://doi.org/10.4028/www.scientific.net/msf.706-709.1521 ( reposiTUm)

Lang, P., Falahati, A., Ahmadi, M. R., Warczok, P., Povoden-Karadeniz, E., Radis, R., & Kozeschnik, E. (2011). Modeling the influence of cooling rate on the precipitate evolution in Al-Mg-Si (Cu) alloys. In Materials Science and Technology 2011 (pp. 284–291). Materials Science and Technology 2011. http://hdl.handle.net/20.500.12708/66492 ( reposiTUm)

Falahati, A., Lang, P., & Kozeschnik, E. (2011). Precipitation in Al-Alloy 6016 – The Role of Excess Vacancies. In THERMEC 2011 (pp. 317–322). Materials Science Forum. https://doi.org/10.4028/www.scientific.net/msf.706-709.317 ( reposiTUm)

Six, J., Schwarz, S., Wojcik, T., Ilie, S., & Kozeschnik, E. (2011). Simulation of the precipitation kinetics in low-carbon Nb-micro-alloyed steels. In Proceedings (p. 8). http://hdl.handle.net/20.500.12708/66413 ( reposiTUm)

Warczok, P., Shan, Y., Schober, M., Leitner, H., & Kozeschnik, E. (2011). Analysis of clustering characteristics during early stages of Cu precipitation in bcc-Fe. In Proceedings of «PTM 2010» (pp. 309–314). Solid State Phenomena. http://hdl.handle.net/20.500.12708/66257 ( reposiTUm)

Falahati, A., Ahmadi, M. R., Lang, P., Povoden-Karadeniz, E., Warczok, P., & Kozeschnik, E. (2011). Thermo-kinetic computer simulation of precipitation and age-hardening effect in Al-Mg-Si alloys with arbitrary heat treatment. In MS&T´11 (p. 8). http://hdl.handle.net/20.500.12708/66417 ( reposiTUm)

Falahati, A., Lang, P., Ahmadi, M. R., Warczok, P., Povoden-Karadeniz, E., & Kozeschnik, E. (2010). Computer Simulationen der Ausscheidungs-Mikrostruktur- und Festigkeitsentwicklung von Al-Mg-Si Legierungen in mehrstufigen Wärmebehandlungen. In MOBILITÄT IM WANDEL: Anforderungen an modernen Leichtbau und Leicchtmetalle (pp. 61–75). LKR-Verlag. http://hdl.handle.net/20.500.12708/66155 ( reposiTUm)

Lang, P., Falahati, A., Povoden-Karadeniz, E., Ahmadi, M. R., Warczok, P., & Kozeschnik, E. (2010). Modeling of the Yield Strength Evolution in Al-Mg-Si Alloys. In Proceedings - The 12th Internatinal Conference on Aluminium Alloys (pp. 1443–1448). http://hdl.handle.net/20.500.12708/66183 ( reposiTUm)

Six, J., Schwarz, S., Ilie, S., & Kozeschnik, E. (2010). Analyse korngrenzennaher NbC-Ausscheidungen mittels Replica-Methode und Korrelation zum 2. Duktilitätsminimum. In G. Petzow (Ed.), Fortschritte in der Metallographie (pp. 57–62). Sonderbände der Praktischen Metallographie. http://hdl.handle.net/20.500.12708/66189 ( reposiTUm)

Six, J., Göksenli, A., Ilie, S., & Kozeschnik, E. (2010). Investigation of the Hot Ductility Trough of Nb-Containing Low Alloy Steel. In Proceedings MS&T 2010 (p. 10). http://hdl.handle.net/20.500.12708/66190 ( reposiTUm)

Radis, R., Zickler, G., Stockinger, M., Sommitsch, C., & Kozeschnik, E. (2010). Numerical Simulation of the Simultaneous Precipitation of Delta and Gamma Prime Phases in the Ni-Base Superalloy ATI Allvac 718 Plus. In Proceedings of the 7th International Symposium on Superalloy 718 and Derivatives (p. 10). Wiley. http://hdl.handle.net/20.500.12708/66160 ( reposiTUm)

Shim, J. H., Kozeschnik, E., Jung, W.-S., & Cho, Y. W. (2010). Prediction of long-term precipitate evolution in austenitic heat-resistant steels. In Materials for Advanced Power Engineering 2010 (pp. 198–207). http://hdl.handle.net/20.500.12708/66514 ( reposiTUm)

Holzer, I., Kozeschnik, E., & Cerjak, H. (2010). A numerical approach to predict the long-term creep behaviour and precipitate back-stress evolution of 9-12% Cr steels. In Materials for Advanced Power Engineering (pp. 1077–1087). http://hdl.handle.net/20.500.12708/66512 ( reposiTUm)

Sonderegger, B., Hacksteiner, M., Mendez-Martin, F., Holzer, I., & Kozeschnik, E. (2010). Calculation of phase boundary energies and application in multi-component steels. In Materials for Advanced Power Engineering 2010 (pp. 320–329). http://hdl.handle.net/20.500.12708/66513 ( reposiTUm)

Falahati, A., Povoden-Karadeniz, E., Lang, P., Warczok, P., & Kozeschnik, E. (2010). Thermo-kinetic Computer Simulation of Differential Scanning Calorimetry Curves of AlMgSi Alloys. In Proceedings of the 12th International Conference on Aluminium Alloys (p. 6). The Japan Institute of Light Metals. http://hdl.handle.net/20.500.12708/66262 ( reposiTUm)

Radis, R., & Kozeschnik, E. (2010). Kinetics of AlN Precipitation in the Ferrite Phase Field of Microalloyed (HSLA) Steels. In Proceedings of 139th Annual Meeting & Exhibition TMS, Vol. 2: Materials Characterization, Computation, Modeling and Energy (pp. 341–348). http://hdl.handle.net/20.500.12708/66052 ( reposiTUm)

Lang, P., Falahati, A., Povoden-Karadeniz, E., Nodin, O., Warczok, P., & Kozeschnik, E. (2010). Simulation of precipitation sequences of metastable and stable phases in Al-Mg-Si alloys. In Junior Scientist Conference (pp. 111–112). http://hdl.handle.net/20.500.12708/66182 ( reposiTUm)

Radis, R., Zickler, G., Stockinger, M., Sommitsch, C., & Kozeschnik, E. (2009). Interaction of the Precipitation Kinetics of Delta and Gamma Prime Phases in Nickel-Base Superalloy ATI Allvac 718 Plus. In THERMEC ´2009 - International Conference on Processing & Manufacturing of Advanced Materials (p. 6). http://hdl.handle.net/20.500.12708/66038 ( reposiTUm)

Radis, R., & Kozeschnik, E. (2009). Precipitation Kinetics of Aluminium Nitride in Austenite in Microalloyed HSLA Steels. In Proceedings of the V International Symposium - Materias 2009 (p. 6). http://hdl.handle.net/20.500.12708/66040 ( reposiTUm)

Radis, R., & Kozeschnik, E. (2009). Numerical analysis of AlN precipitation kinetics in microalloyed austenite. In Proc. Asia Steel 2009 (pp. S13-24). http://hdl.handle.net/20.500.12708/66035 ( reposiTUm)

Radis, R., & Kozeschnik, E. (2009). Simulation of Concurrent AlN and VN Precipitation During Thermal Treatment of Microalloyed Steels. In Proceedings of 3rd STEELSIM Conference (pp. 326–331). http://hdl.handle.net/20.500.12708/66037 ( reposiTUm)

Warczok, P., Shan, Y., & Kozeschnik, E. (2009). Monte-Carlo study of coherent bcc-Cu precipitation in alpha-iron. In Proc. Asia Steel 2009 (pp. S13-29). http://hdl.handle.net/20.500.12708/66034 ( reposiTUm)

Schwarz, S., Radis, R., Kozeschnik, E., & Rumplmair, G. (2009). TEM investigations of the precipitation kinetics of Mn(Cu)S and AlN in microalloyed steel. In G. Kothleitner, M. Leisch, M. A. Pabst, G. Zellnig, W. Grogger, F. Hofer, & P. Pölt (Eds.), Mc 2009. Microscopy Conference, Graz, Austria. 30 August - 4 September 2009. First Joint Meeting Of Dreiländertagung And Multinational Congress On Microscopy. (pp. 253–254). Facultas Verlag. https://doi.org/10.3217/978-3-85125-062-6-499 ( reposiTUm)

Holzer, I., Mayr, P., Sonderegger, B., Kozeschnik, E., & Cerjak, H. (2008). Simulation And Validation Of The Evolution Of Precipitates During Production And Fabrication Of A Complex Martensitic 9 Wt.% Cr Steel. In 17th International Conference “Computer Technology in Welding and Manufacturing” (p. 10). http://hdl.handle.net/20.500.12708/65817 ( reposiTUm)

Holzer, I., Kozeschnik, E., & Cerjak, H. (2008). Computational Modeling Of The Strength Evolution During Processing And Service Of 9-12% Cr Steels. In Proc. Fifth Int. Conf. Mathematical Modeling and Computer Simulation of Material Technology (pp. 14–22). http://hdl.handle.net/20.500.12708/65847 ( reposiTUm)

Radis, R., Schaffer, M., Albu, M., Kothleitner, G., Pölt, P., & Kozeschnik, E. (2008). Evolution of Size and Morphology of Gamma’ Precipitates in UDIMET 720 Li During Continuous Cooling. In SUPERALLOYS 2008 (pp. 829–836). http://hdl.handle.net/20.500.12708/66039 ( reposiTUm)

Radis, R., & Kozeschnik, E. (2008). Die Ausscheidungskinetik von Aluminiumnitrid in Austenit in mikrolegierten Stählen. In 10. Werkstofftagung: Verarbeitungs- und Gebrauchseigenschaften von Werkstoffen - Heute und Morgen (pp. 89–91). http://hdl.handle.net/20.500.12708/66041 ( reposiTUm)

Imtiaz, F., & Kozeschnik, E. (2008). Experimental and Theoretical Analysis of Isothermal Austenite Decomposition in Low and Ultra-Low Carbon Steel. In Verarbeitungs-und Gebrauchseigenschaften von Werkstoffen-Heute and Morgen (pp. 95–96). http://hdl.handle.net/20.500.12708/66042 ( reposiTUm)

Book Contributions

Kozeschnik, E. (2022). Mean-Field Microstructure Kinetics Modeling. In Encyclopedia of Materials: Metals and Alloys (pp. 521–526). Elsevier Inc. https://doi.org/10.1016/B978-0-12-819726-4.00055-7 ( reposiTUm)

Books

Sommitsch, C., Ionescu, M., Mishra, B., Kozeschnik, E., & Chandra, T. (Eds.). (2017). THERMEC 2016 (Materials Science Forum Vol. 879). Trans Tech Publications Ltd. https://doi.org/10.4028/www.scientific.net/msf.879 ( reposiTUm)

Kozeschnik, E. (2013). Modeling Solid-State Precipitation. Momentum Press, LLC. https://doi.org/10.5643/9781606500644 ( reposiTUm)

Koenraad, G. F. J., Raabe, D., Kozeschnik, E., Miodownik, M. A., & Nestler, B. (2007). Computational Materials Engineering - An Introduction to Microstructure Evolution. Elsevier. http://hdl.handle.net/20.500.12708/22734 ( reposiTUm)

Cerjak, H., Bhadeshia, H., & Kozeschnik, E. (Eds.). (2007). Mathematical Modelling of Weld Phenomena 8. Verlag der Technischen Universität Graz. http://hdl.handle.net/20.500.12708/22736 ( reposiTUm)

Cerjak, H., Bhadeshia, H., & Kozeschnik, E. (Eds.). (2005). Mathematical Modelling of Weld Phenomena 7. Verlag der Technischen Universität Graz. http://hdl.handle.net/20.500.12708/22735 ( reposiTUm)

Presentations

Krejci, A. L., & Kozeschnik, E. (2025, March 20). Deciphering flow curves: Understanding microstructure evolution for optimal metal forming [Conference Presentation]. MEFORM, Freiberg, Germany. http://hdl.handle.net/20.500.12708/216071 ( reposiTUm)

Krejci, A. L., & Kozeschnik, E. (2025, July 10). Dislocation-based Modeling of Flow Curves and Dynamic Recovery: Influence of Solutes, Clusters, and Precipitates [Conference Presentation]. LightMAT 2025, Montreal, Canada. http://hdl.handle.net/20.500.12708/218626 ( reposiTUm)

Krejci, A. L., & Kozeschnik, E. (2024, September 25). The impact of solutes and precipitates on the strain hardening behavior in Al-alloys [Conference Presentation]. MSE 2024, Darmstadt, Germany. ( reposiTUm)

Jacob, A. A. F., Presoly, P., Gürtenhofer, R., Kozeschnik, E., & Povoden-Karadeniz, E. (2024, June 4). Can we experimentally find bainite in Fe-C? [Conference Presentation]. MCacceL Bainite Workshop 2024, Leoben, Austria. http://hdl.handle.net/20.500.12708/199810 ( reposiTUm)

Wojcik, T., Kahlenberg, R., Falkinger, G., Krejci, A. L., Milkereit, B., & Kozeschnik, E. (2023, September 11). Transformation of metastable phases into the stable Mg2Si phase in aluminum alloys – An in-situ study [Poster Presentation]. IMC20 The 20th International Microscopy Congress, Busan, Korea (the Republic of). http://hdl.handle.net/20.500.12708/192911 ( reposiTUm)

Jacob, A. A. F., Schuscha, B., Povoden-Karadeniz, E., & Kozeschnik, E. (2023, July 4). Thermodynamics-based modelling of the bainite start temperature including the BCT transformation [Conference Presentation]. Thermec 2023 - International Conference on Processing & Manufacturing of Advanced Materials, TU Wien, Austria. http://hdl.handle.net/20.500.12708/199665 ( reposiTUm)

Jacob, A. A. F., Schuscha, B., Retzl, P., Shan, Y., Povoden-Karadeniz, E., & Kozeschnik, E. (2023, June 26). Thermodynamic prediction of the C-dependency for bainite formation: the importance of Fe-C [Conference Presentation]. Calphad L: 50 th International Conference on Computer Coupling of Phase Diagrams and Thermochemistry, Cambridge, United States of America (the). http://hdl.handle.net/20.500.12708/199664 ( reposiTUm)

Wei, W., Povoden-Karadeniz, E., & Kozeschnik, E. (2023, September 5). Considering work hardening of metals from perspective of statistical mechanics [Conference Presentation]. FEMS EUROMAT 2023, Frankfurt am Main, Germany. http://hdl.handle.net/20.500.12708/193358 ( reposiTUm)

Jacob, A., Retzl, P., & Kozeschnik, E. (2022, May 23). Reassessment of low-temperature Gibbs energies for T0-temperature evaluation [Poster Presentation]. Calphad XLIX International Conference on Computer Coupling of Phase Diagrams and Thermochemistry, Stockholm, Sweden. ( reposiTUm)

Jacob, A., & Kozeschnik, E. (2022, September 9). A new bainite database involving T0 approach [Presentation]. Bainite workshop, Wien, Austria. http://hdl.handle.net/20.500.12708/152568 ( reposiTUm)

Sadeghi, A., & Kozeschnik, E. (2022, September 29). Simulation of flow curves of pure Al for a range of temperatures and strain rates [Conference Presentation]. MSE 2022, Darmstadt, Germany. ( reposiTUm)

Kahlenberg, R., Kozeschnik, E., Raninger, P., & Prevedel, P. (2022, September 28). Modelling static recrystallization of AA2024 tubular parts processed via rotary swaging [Conference Presentation]. Materials Science and Engineering Congress 2022 (MSE 2022), Germany. http://hdl.handle.net/20.500.12708/154023 ( reposiTUm)

Estermann, P., Ilie, S., Six, J., & Kozeschnik, E. (2022, October 10). Further analysis of the relationship between precipitate formation and a loss of hot ductility in two microalloyed steels [Conference Presentation]. Materials Science & Technology 2022, Pittsburgh, Pennsylvania, United States of America (the). http://hdl.handle.net/20.500.12708/152540 ( reposiTUm)

Viernstein, B., & Kozeschnik, E. (2021). Integrated Physical-Constitutive Computational Framework for Plastic Deformation Modeling. EUROMAT 2021, Online, Unknown. http://hdl.handle.net/20.500.12708/95610 ( reposiTUm)

Vogric, M., Kozeschnik, E., Svoboda, J., Zamberger, S., & Povoden-Karadeniz, E. (2021). Modelling of grain boundary cementite growth kinetics in hypereutectoid steels by conventional and autocatalytic ledge growth approaches. EUROMAT 2021, Online, Unknown. http://hdl.handle.net/20.500.12708/95592 ( reposiTUm)

Estermann, P., Shan, Y., & Kozeschnik, E. (2021). Modelling grain boundary segregation in polycrystalline materials. THERMEC 2021, Online, Austria. http://hdl.handle.net/20.500.12708/95594 ( reposiTUm)

Miesenberger, B., Kozeschnik, E., Milkereit, B., & Povoden-Karadeniz, E. (2020). Computational simulation of precipitation during continuous cooling of 6xxx Al-alloys. TMS Annual Meeting & Exhibition 2020, San Diego, United States of America (the). http://hdl.handle.net/20.500.12708/95380 ( reposiTUm)

Wojcik, T., Redermeier, A., Ebner, T., & Kozeschnik, E. (2019). Characterization of metastable phases in Al-Mg-Si alloys after interrupted heating experiments. Euromat 2019, Stockholm, Sweden. http://hdl.handle.net/20.500.12708/95219 ( reposiTUm)

Miesenberger, B., Pasching, A., Kozeschnik, E., & Povoden-Karadeniz, E. (2019). Characterization and modelling of interactions between Mg-Si precipitates and AlFeSi-based dispersoids during homogenization of 6xxx aluminium alloy. Euromat 2019, Stockholm, Sweden. http://hdl.handle.net/20.500.12708/95273 ( reposiTUm)

Miesenberger, B., Kozeschnik, E., Povoden-Karadeniz, E., & Pasching, A. (2019). Simulation of precipitation in 6xxx aluminium alloys during continuous cooling DSC. LightMAT 2019, Manchester, Germany. http://hdl.handle.net/20.500.12708/95274 ( reposiTUm)

Povoden-Karadeniz, E., & Kozeschnik, E. (2019). Thermokinetics of phase transformations in AlTiNbV light-weight refractory HEA. Euromat 2019, Stockholm, Sweden. http://hdl.handle.net/20.500.12708/95254 ( reposiTUm)

Vogric, M., Kozeschnik, E., & Povoden-Karadeniz, E. (2019). Thermokinetic considerations on the effect of copper on proeutectoid cementite formation in hypereutectoid steels. Euromat 2019, Stockholm, Sweden. http://hdl.handle.net/20.500.12708/95259 ( reposiTUm)

Jacob, A., Povoden-Karadeniz, E., Kozeschnik, E., Domain, C., Adjanor, G., & Todeschini, P. (2019). Thermodynamic modeling of G-phase for applied Calphad in Fe-based alloys. Calphad XLVIII, Singapore. http://hdl.handle.net/20.500.12708/95248 ( reposiTUm)

Redermeier, A., Wojcik, T., Ebner, T., & Kozeschnik, E. (2019). Evolution of meta-stable phases in Al-Mg-Si alloys - Comparison of thermokinetic simulations and experimental findings. Euromat 2019, Stockholm, Sweden. http://hdl.handle.net/20.500.12708/95267 ( reposiTUm)

Redermeier, A., Ebner, T., & Kozeschnik, E. (2019). Revised CALPHAD modeling of the cluster phase in Al-Mg-Si alloys. International Conference Integrated Computational Materials, Process and Product Engineering 2019, Leoben, Austria. http://hdl.handle.net/20.500.12708/95268 ( reposiTUm)

Shan, Y., Sowa, R., Svoboda, J., Fischer, F. D., & Kozeschnik, E. (2019). Influence of stress relaxation on the coarsening kinetics of incoherent precipitates. Euromat 2019, Stockholm, Sweden. http://hdl.handle.net/20.500.12708/95239 ( reposiTUm)

Vogric, M., Abart, R., Kozeschnik, E., & Povoden-Karadeniz, E. (2019). Coupling of phase field simulation of pearlite formation considering Fe3C1-x cementite and MatCalc thermokinetic input data. The 4th International Symposium on Phase-Field Modelling in Materials Science, Bochum, Germany. http://hdl.handle.net/20.500.12708/95258 ( reposiTUm)

Zügner, D., Holly, S., Ernst, W., Schnitzer, R., & Kozeschnik, E. (2018). Computational analysis of the yield stress of ultra-high strength all-weld metals. 12th International Seminar on Numerical Analysis of Weldability, Graz - Castle Seggau, Austria. http://hdl.handle.net/20.500.12708/94992 ( reposiTUm)

Kozeschnik, E. (2018). Physikalische Metallurgie: Was kann die Alu-Welt von der Stahlwelt lernen? AMAG Beirat, Ranshofen, Austria. http://hdl.handle.net/20.500.12708/94995 ( reposiTUm)

Zamberger, S., Zügner, D., Rupprechter, G., Yigit, N., & Kozeschnik, E. (2018). Hydrogen trapping at solutes and carbides in Fe-Nb-C Modeling and experiments. THERMEC 2018, Paris, France. http://hdl.handle.net/20.500.12708/94991 ( reposiTUm)

Kreyca, J., Viernstein, B., & Kozeschnik, E. (2018). State parameter-based modeling of the strain rate and temperature dependent yield stress. THERMEC 2018, Paris, France. http://hdl.handle.net/20.500.12708/94998 ( reposiTUm)

Kozeschnik, E. (2018). Modellierung und Simulation des Potenzials zur Ausscheidungs-Verfestigung bei der Wärmebehandlung von 6xxx Al-Legierungen. MEFORM 2018, Freiberg, Germany. http://hdl.handle.net/20.500.12708/94996 ( reposiTUm)

Wojcik, T., Rath, M., & Kozeschnik, E. (2018). EBSD study on the recrystallization behaviour of the nickel-base superalloy Rene 65. 19th International Microscopy Congress, Sydney, Australia. http://hdl.handle.net/20.500.12708/94989 ( reposiTUm)

Kozeschnik, E. (2018). From state parameter-based microstructure modeling to temperature and strain rate-dependent yield stress. 9th International Conference on Multiscale Materials Modeling, Osaka, Japan. http://hdl.handle.net/20.500.12708/94997 ( reposiTUm)

Kozeschnik, E. (2017). Aluminium-Hybridlegierungen 2xxx, 6xxx, 7xxx. AMAG Beirat, Ranshofen, Austria. http://hdl.handle.net/20.500.12708/94817 ( reposiTUm)

Kreyca, J., & Kozeschnik, E. (2017). Thermally activated strain hardening in Al-alloys. 63. Metallkunde Kolloquium, Lech am Arlberg, Austria. http://hdl.handle.net/20.500.12708/94808 ( reposiTUm)

Qin, L., & Kozeschnik, E. (2017). Reconstructing Nucleation Free Energy in Forward Flux Sampling. ViCoM Workshop Fall 2017, Schlaining, Austria. http://hdl.handle.net/20.500.12708/94712 ( reposiTUm)

Wojcik, T., Rath, M., & Kozeschnik, E. (2017). TEM-Characterization and Precipitation Simulation of Secondary Phases in Ni-base Superalloy Rene 65. EUROMAT 2017, THESSALONIKI, Greece. http://hdl.handle.net/20.500.12708/94755 ( reposiTUm)

Redermeier, A., Povoden-Karadeniz, E., & Kozeschnik, E. (2017). Thermodynamic description of TCP phases in commercial single crystal Ni-base superalloys with special emphasis on the P-phase. Modelling and Simulation of Superalloys 2017, Bochum, Germany. http://hdl.handle.net/20.500.12708/94697 ( reposiTUm)

Shan, Y., & Kozeschnik, E. (2017). Monte Carlo Study of Interstitial Diffusion in the Presence of Solute Atom Traps. EUROMAT 2017, THESSALONIKI, Greece. http://hdl.handle.net/20.500.12708/94696 ( reposiTUm)

Radlwimmer, H., Wiehoff, P., Wojcik, T., Six, J., Ilie, S., & Kozeschnik, E. (2017). Influence of different cooling regimes on the hot ductility of continuously cast micro-alloyed steel. EUROMAT 2017, THESSALONIKI, Greece. http://hdl.handle.net/20.500.12708/94665 ( reposiTUm)

Kabliman, E., Schlögl, C., Kronsteiner, J., & Kozeschnik, E. (2017). Integrated Modeling of Materials Microstructure during Thermo-Mechanical Processing: a DYNACalc Material Model. EUROMAT 2017, THESSALONIKI, Greece. http://hdl.handle.net/20.500.12708/94827 ( reposiTUm)

Qin, L., Redermeier, A., & Kozeschnik, E. (2017). Analysis of composition and shape of critical copper nuclei in dilute Fe-Cu alloys from atomistic simulations. EUROMAT 2017, THESSALONIKI, Greece. http://hdl.handle.net/20.500.12708/94828 ( reposiTUm)

Kreyca, J., & Kozeschnik, E. (2017). Flow stress modeling and microstructure development during deformation of metallic materials. MEFORM 2017, Freiberg, Germany. http://hdl.handle.net/20.500.12708/94829 ( reposiTUm)

Kozeschnik, E. (2017). Simultaneous evolution of microstructure and precipitation - State of the art in modeling with MatCalc. Seminar Saarbrücken, Saarbrücken, Germany. http://hdl.handle.net/20.500.12708/94831 ( reposiTUm)

Povoden-Karadeniz, E., Rath, M., Redermeier, A., & Kozeschnik, E. (2017). Prediction of eta-phase Ni6AlNb evolution in Ni-base superalloys by computational thermokinetics. Modelling and Simulation of Superalloys 2017, Bochum, Germany. http://hdl.handle.net/20.500.12708/94793 ( reposiTUm)

Jacob, A., Povoden-Karadeniz, E., & Kozeschnik, E. (2017). Thermodynamic modeling of Fe-Cr-Ni and its implication for the calculation of multicomponent system. 46. Calphad International Conference, St. Malo, France. http://hdl.handle.net/20.500.12708/94823 ( reposiTUm)

Buken, H., & Kozeschnik, E. (2017). Modelling the thermo-mechanical processing of micro-alloyed steel. EUROMAT 2017, THESSALONIKI, Greece. http://hdl.handle.net/20.500.12708/94820 ( reposiTUm)

Wiehoff, P., Radlwimmer, H., Ilie, S., Requena, G., & Kozeschnik, E. (2017). The Influence of Temperature Oscillations on Hot-Ductility of Continuously Cast Micro-Alloyed Steel. EUROMAT 2017, THESSALONIKI, Greece. http://hdl.handle.net/20.500.12708/94821 ( reposiTUm)

Povoden-Karadeniz, E., Redermeier, A., & Kozeschnik, E. (2017). Hcp-structured delta phase in new generation single crystal Ni-base superalloys - predicted stability by thermodynamic modeling. Modelling and Simulation of Superalloys 2017, Bochum, Germany. http://hdl.handle.net/20.500.12708/94698 ( reposiTUm)

Kozeschnik, E., & Sonderegger, B. (2017). TEM characterization and precipitation simulation of secondary phases in Ni-base superalloy Rene 65. FIMPART, Bordeaux, France. http://hdl.handle.net/20.500.12708/94622 ( reposiTUm)

Povoden-Karadeniz, E., Zamberger, S., & Kozeschnik, E. (2017). Impacts of thermodynamic and kinetic model parameterisation on precipitation simulations - Case study of NbC precipitation in microalloyed steel. 46. Calphad International Conference, St. Malo, France. http://hdl.handle.net/20.500.12708/94825 ( reposiTUm)

Kozeschnik, E., & Sonderegger, B. (2017). Precipitate nucleation in highly supersaturated solid solutions. EUROMAT 2017, THESSALONIKI, Greece. http://hdl.handle.net/20.500.12708/94826 ( reposiTUm)

Buken, H., & Kozeschnik, E. (2017). Recrystallization in Al- Mg alloys - A new modelling approach. Metaldeform 2017, Samara, Russian Federation (the). http://hdl.handle.net/20.500.12708/94819 ( reposiTUm)

Kozeschnik, E., & Sonderegger, B. (2017). Nb(C,N) precipitation and its interaction with recrystallization during hot deformation of steel. TMS 2017, San Diego, United States of America (the). http://hdl.handle.net/20.500.12708/94830 ( reposiTUm)

Wiehoff, P., Radlwimmer, H., Ilie, S., Requena, G., & Kozeschnik, E. (2017). The Influence of Cyclic Cooling on the Hot-Ductility of Continuously Cast Micro-Alloyed Steel. Metallkunde Kolloquium Lech Arlberg, Lech, Austria. http://hdl.handle.net/20.500.12708/94822 ( reposiTUm)

Fragner, W., Antrekowitsch, H., Kozeschnik, E., Mori, G., Pogatscher, S., Sommitsch, C., & Uggowitzer, P. J. (2016). Multi-institutional collaboration of industry and university along the processing chain as a means to holistically optimize material characteristics of aluminum products. THERMEC´2016, Graz, Austria. http://hdl.handle.net/20.500.12708/94565 ( reposiTUm)

Kozeschnik, E., & Povoden-Karadeniz, E. (2016). Modellierung und Simulation metallischer Werkstoffe für medizinische Anwendungen. Bio-meets-materials, Semmering, Austria. http://hdl.handle.net/20.500.12708/94563 ( reposiTUm)

Rath, M., Buken, H., & Kozeschnik, E. (2016). Multi-class modeling of microstructure evolution during high-temperature deformation of Ni-base alloys - Theory and Application. 62. Metallkunde Kolloquium, Lech am Arlberg, Austria. http://hdl.handle.net/20.500.12708/94533 ( reposiTUm)

Shim, J.-H., Jung, W.-S., Suh, J.-Y., Wirth, B., Povoden-Karadeniz, E., & Kozeschnik, E. (2016). Kinetic simulation of long-term precipitate evolution in heat-resistant alloys. THERMEC´2016, Graz, Austria. http://hdl.handle.net/20.500.12708/94571 ( reposiTUm)

Kreyca, J., Falahati, A., & Kozeschnik, E. (2016). Strain hardening of a 6000 series aluminium alloy. 62. Metallkunde Kolloquium, Lech am Arlberg, Austria. http://hdl.handle.net/20.500.12708/94532 ( reposiTUm)

Qin, L., Redermeier, A., & Kozeschnik, E. (2016). A computational study of early-stage precipitation in the Fe-Cu system based on Rare Event Sampling techniques. ViCoM Spring Workshop 2016, Stadtschlaining, Austria. http://hdl.handle.net/20.500.12708/94477 ( reposiTUm)

Zamberger, S., Wojcik, T., Klösch, G., & Kozeschnik, E. (2016). The influence of nitrogen on the precipitation kinetics in microalloyed medium carbon steel. THERMEC´2016, Graz, Austria. http://hdl.handle.net/20.500.12708/94579 ( reposiTUm)

Dépinoy, S., Toffolon-Masclet, C., Gourgues-Lorenzon, A.-F., Kozeschnik, E., Marini, B., & Roch, F. (2016). Experimental study and thermokinetic modelling of carbides precipitation sequences in 2,25Cr-1Mo bainitic steel. THERMEC´2016, Graz, Austria. http://hdl.handle.net/20.500.12708/94578 ( reposiTUm)

Sonderegger, B., & Kozeschnik, E. (2016). On the calculation and impact of phase boundary energies on precipitate kinetics in complex alloys at high temperatures. THERMEC´2016, Graz, Austria. http://hdl.handle.net/20.500.12708/94577 ( reposiTUm)

Radlwimmer, H., Wiehoff, P., Ilie, S., Six, J., & Kozeschnik, E. (2016). Computational and experimental analysis of hot ductility during continuous casting of micro-alloyed steel. THERMEC´2016, Graz, Austria. http://hdl.handle.net/20.500.12708/94462 ( reposiTUm)

Kozeschnik, E., Kreyca, J., Buken, H., Svoboda, J., Riedel, H., & Fischer, F. D. (2016). Temperature and strain rate effects on strengthening of metallic materials. THERMEC´2016, Graz, Austria. http://hdl.handle.net/20.500.12708/94576 ( reposiTUm)

Kozeschnik, E. (2016). MatCalc - Ein Werkzeug zur Simulation metallurgischer Prozesse. TU Clausthal Metallurgie-Kolloquium 2016, Clausthal-Zellerfeld, Germany. http://hdl.handle.net/20.500.12708/94534 ( reposiTUm)

Cirstea, D., Kozeschnik, E., Lang, P., & Povoden-Karadeniz, E. (2016). Calphad-based thermokinetics of precipitation in ti-ni shape memory alloys. MSE 2016, Darmstadt, Germany. http://hdl.handle.net/20.500.12708/94510 ( reposiTUm)

Povoden-Karadeniz, E., & Kozeschnik, E. (2016). Thermokinetic simulation of gamma’-phase precipitation and evolution of yield strength in superalloy PWA1480. 15th international conference on high temperature materials chemistry, Orleans, France. http://hdl.handle.net/20.500.12708/94506 ( reposiTUm)

Borchert, M., Mori, G., Kozeschnik, E., Povoden-Karadeniz, E., Bischof, M., & Tomandl, A. (2016). Corrosion behavior influenced by quenching contitions of HTGN martensitic stainless steel. 24th International Conference on Materials and Technology, Portoroz, Slovenia. http://hdl.handle.net/20.500.12708/94507 ( reposiTUm)

Redermeier, A., Povoden-Karadeniz, E., & Kozeschnik, E. (2016). First principles aided thermodynamic modeling of TCP phases in Ni-base superalloys. X. seminar of Central European PhD students in Material Science, Kosice, Slovakia. http://hdl.handle.net/20.500.12708/94475 ( reposiTUm)

Povoden-Karadeniz, E., Kozeschnik, M., Wojcik, T., & Kozeschnik, E. (2016). TEM-Analysis of γ’ precipitates in Ni-base superalloy PWA1480. X. seminar of Central European PhD students in Material Science, Kosice, Slovakia. http://hdl.handle.net/20.500.12708/94487 ( reposiTUm)

Kozeschnik, E., Svoboda, J., & Fischer, F. D. (2016). Application of the thermodynamic extremal principle to solid-state precipitation. Workshop Mechanics of Materials ELACTAM, Havanna, Cuba. http://hdl.handle.net/20.500.12708/94535 ( reposiTUm)

Zamberger, S., & Kozeschnik, E. (2016). Computational analysis of hydrogen long-range diffusion in steel accounting for the presence of various traps. International Hydrogen Conference 2016, Moran, Wyoming, United States of America (the). http://hdl.handle.net/20.500.12708/94443 ( reposiTUm)

Rath, M., Krumphals, A., Stockinger, M., & Kozeschnik, E. (2016). Microstructural Modelling of Thermo-mechanically Processed Ni-base Superalloys. 6th International Conference on Recrystallization and Grain Growth, Pittsburgh, United States of America (the). http://hdl.handle.net/20.500.12708/94486 ( reposiTUm)

Buken, H., Svoboda, J., & Kozeschnik, E. (2016). A Multi-class Approach for the Description of Static and Dynamic Recrystallization in Steel. 6th International Conference on Recrystallization and Grain Growth, Pittsburgh, United States of America (the). http://hdl.handle.net/20.500.12708/94558 ( reposiTUm)

Jacob, A., Talik, M., Lopez, J., Kuhn, B., Povoden-Karadeniz, E., & Kozeschnik, E. (2016). Thermodynamic and kinetic modeling of Laves phase containing systems for the development of high Cr ferritic steels. CALPHADXLIV, Loano, Italy. http://hdl.handle.net/20.500.12708/94511 ( reposiTUm)

Kozeschnik, E. (2015). MatCalc - The Materials Calculator. Functionality and applications. Thermodynamic Workshop Austria, Kapfenberg, Austria. http://hdl.handle.net/20.500.12708/94312 ( reposiTUm)

Kozeschnik, E. (2015). Ausscheidungsmodellierung am IWS: Wie es begann und wohin der Weg führt. 12. IWS Werkstofftagung, Graz, Austria. http://hdl.handle.net/20.500.12708/94317 ( reposiTUm)

Stechauner, G., & Kozeschnik, E. (2015). Tailoring copper precipitates in a 17-4 PH steel by using thermo-kinetic simulation software. 61. Metallkunde-Kolloquium, Lech am Arlberg, Austria. http://hdl.handle.net/20.500.12708/94295 ( reposiTUm)

Kozeschnik, E., & Leitner, H. (2015). Christian Doppler Labor Early Stages of Precipitation. 20 Jahre Christian Doppler Forschungsgesellschaft - Wissen schafft Wert, Wien, Austria. http://hdl.handle.net/20.500.12708/94296 ( reposiTUm)

Lückl, M., Wojcik, T., Wucher, J., Zamberger, S., & Kozeschnik, E. (2015). Effect of AlN Precipitates on the Hot Ductility of Microalloyed Steel. 61. Metallkunde-Kolloquium, Lech am Arlberg, Austria. http://hdl.handle.net/20.500.12708/94173 ( reposiTUm)

Povoden-Karadeniz, E., Kozeschnik, M., Wojcik, T., & Kozeschnik, E. (2015). Investigation of γ’ precipitation in Ni-base superalloy PWA1480. 5th ASEM Workshop “Advanced Electron Microscopy,” MedUni Graz, Austria. http://hdl.handle.net/20.500.12708/94188 ( reposiTUm)

Ahmadi, M. R., Falahati, A., & Kozeschnik, E. (2015). A model for precipitation strengthening in multi-particle systems. 17th International Conference on the Strength of Materials (ICSMA 17), Brünn, Czechia. http://hdl.handle.net/20.500.12708/94306 ( reposiTUm)

Kozeschnik, E., Redermeier, A., Reith, D., Kerschner, T., & Podloucky, R. (2015). Monte Carlo study of Cu precipitation in Fe - From temperature-dependent cluster expansion to local chemical environment potentials. ICAMS Advanced Discussions, Bochum, Germany. http://hdl.handle.net/20.500.12708/94304 ( reposiTUm)

Rath, M., Povoden-Karadeniz, E., & Kozeschnik, E. (2015). A thermodynamic description for the new η-phase Ni6AlNb. EUROMAT 2015, Warschau, Poland. http://hdl.handle.net/20.500.12708/94302 ( reposiTUm)

Stechauner, G., & Kozeschnik, E. (2015). Investigation of a possible mechanism for the formation of reverted austenite in 13-8 PH steel. EUROMAT 2015, Warschau, Poland. http://hdl.handle.net/20.500.12708/94303 ( reposiTUm)

Rath, M., Povoden-Karadeniz, E., & Kozeschnik, E. (2015). A thermodynamic description for the new η‐phase Ni6AlNb. EUROMAT 2015, Warschau, Poland. http://hdl.handle.net/20.500.12708/94299 ( reposiTUm)

Rafiezadeh, S., Falahati, A., & Kozeschnik, E. (2015). Simulation of microstructure evolution during homogenization of electromagnetic cast ingots of 7050 aluminium alloys. EUROMAT 2015, Warschau, Poland. http://hdl.handle.net/20.500.12708/94301 ( reposiTUm)

Svoboda, J., Shan, Y., Kozeschnik, E., & Fischer, F. D. (2015). Thermodynamic model for Mg-Si dimer formation kinetics in Al-Mg-Si alloys. 11th International Conference on Diffusion in Solids and liquids, München, Germany. http://hdl.handle.net/20.500.12708/94298 ( reposiTUm)

Kozeschnik, E., Shan, Y., Fischer, F. D., & Svoboda, J. (2015). Thermo-kinetics of Mg-Si couples as a precursor to precipitation in Al-Mg-Si alloys. EUROMAT 2015, Warschau, Poland. http://hdl.handle.net/20.500.12708/94300 ( reposiTUm)

Kozeschnik, E. (2015). Simultaneous evolution of microstructure and precipitation - State of the art in modeling with MatCalc. Seminar TU Chemnitz, Chemnitz, Germany. http://hdl.handle.net/20.500.12708/94297 ( reposiTUm)

Kozeschnik, E. (2015). Simultaneous evolution microstructure and precipitation - State of the art in modeling with MatCalc. Werkstoffkundliches Seminar Institut für Materialprüfung, Werkstoffkunde und Festigkeitslehre (IMWF), Stuttgart, Germany. http://hdl.handle.net/20.500.12708/94311 ( reposiTUm)

Wojcik, T., Kozeschnik, E., & Lückl, M. (2015). Precipitation-Induced Hot Ductility Loss in Microalloyed Steel - A TEM-Study. EUROMAT 2015, Warschau, Poland. http://hdl.handle.net/20.500.12708/94165 ( reposiTUm)

Redermeier, A., Povoden-Karadeniz, E., & Kozeschnik, E. (2015). Thermodynamic description of TCP phases in commercial Ni-base superalloys. EUROMAT 2015, Warschau, Poland. http://hdl.handle.net/20.500.12708/94196 ( reposiTUm)

Povoden-Karadeniz, E., Mayer, W., & Kozeschnik, E. (2015). Thermodynamic modeling of carbon clusters in martensite. CALPHADXLIV, Loano, Italy. http://hdl.handle.net/20.500.12708/94199 ( reposiTUm)

Kreyca, J., & Kozeschnik, E. (2015). Modeling the stress-strain curve of poly-crystalline metals using a state parameter-based approach. PLASTICITY 2015, Montego Bay, Jamaica. http://hdl.handle.net/20.500.12708/94305 ( reposiTUm)

Dépinoy, S., Toffolon-Masclet, C., Gourgues-Lorenzon, A.-F., Kozeschnik, E., Marini, B., & Roch, F. (2015). Experimental determination and modeling of carbide precipitation sequences in a 2.25Cr - 1Mo bainitic steel during tempering. TMS 2015, Orlando, United States of America (the). http://hdl.handle.net/20.500.12708/94313 ( reposiTUm)

Primig, S., Stechauner, G., & Kozeschnik, E. (2015). Early stages of Cu precipitation in 15-5 PH maraging steel revisited - Experiments and Modelling. PTM 2015 Solid-Solid Phase Transformation in Inorganic Materials, Whistler, Canada. http://hdl.handle.net/20.500.12708/94310 ( reposiTUm)

Buken, H., & Kozeschnik, E. (2015). State parameter-based modelling of microstructure evolution in micro-alloyed steel during hot forming. Workshop des COMET-K2 Kompetenzzentrums MPPE, Leoben, Austria. http://hdl.handle.net/20.500.12708/94308 ( reposiTUm)

Schmidtchen, M., Rimnac, A., Warczok, P., Kozeschnik, E., Bernhard, C., Bragin, S., Kawalla, R., & Linzer, B. (2015). Investigation of the influence of the chemical composition of C-Mn steel grades on the microstructure homogeneity during hot rolling in continuous rolling mills using a fast layer model. Workshop des COMET-K2 Kompetenzzentrums MPPE, Leoben, Austria. http://hdl.handle.net/20.500.12708/94309 ( reposiTUm)

Redermeier, A., Reith, D., Kerscher, T. C., Podloucky, R., & Kozeschnik, E. (2014). Cu precipitation in Fe - From first-principles to cluster properties. ViCoM Young Researchers Meeting, Wien, Austria. http://hdl.handle.net/20.500.12708/93953 ( reposiTUm)

Redermeier, A., & Kozeschnik, E. (2014). Interfacial free energies in the FeₓCu₁₋ₓ system from Monte Carlo simulations. ViCoM Young Researchers Meeting, Wien, Austria. http://hdl.handle.net/20.500.12708/93952 ( reposiTUm)

Kozeschnik, E., Primig, S., & Leitner, H. (2014). Early Stages of Precipitation - Experiments and Modelling. 60. Metallkunde-Jubiläumskolloquium, Lech am Arlberg, Austria. http://hdl.handle.net/20.500.12708/94281 ( reposiTUm)

Rodríguez Ripoll, M., Heindl, F., Jech, M., Lechner, C., Habersohn, C., Bleicher, F., Adjassoho, B., Kozeschnik, E., Gössinger, S., & Bauer, C. (2014). Improving the tribological properties of functional surfaces using machine hammer peening. 19th International Colloquium Tribology, Stuttgart, Germany. http://hdl.handle.net/20.500.12708/93972 ( reposiTUm)

Povoden-Karadeniz, E., Hadke, S. S., & Kozeschnik, E. (2014). Thermodynamic modelling and precipitation simulation in austenitic stainless steel. TOFA 2014, Brünn, Czechia. http://hdl.handle.net/20.500.12708/93947 ( reposiTUm)

Stechauner, G., & Kozeschnik, E. (2014). Simulation of Cu precipitation in Fe-Cu binary system. 8th European Doctoral Meeting, Budapest, Hungary. http://hdl.handle.net/20.500.12708/93907 ( reposiTUm)

Kozeschnik, E. (2014). Thermo-kinetics based materials modeling with MatCalc - Functionality and integration. 1st International Workshop on Software Solutions for ICME, Aachen, Germany. http://hdl.handle.net/20.500.12708/94285 ( reposiTUm)

Kozeschnik, E. (2014). Simultaneous evolution of microstructure and precipitation - State of the art in modeling with MatCalc. ICAMS Advanced Discussions, Bochum, Germany. http://hdl.handle.net/20.500.12708/94284 ( reposiTUm)

Kozeschnik, E. (2014). Through process modelling of precipitation reactions. ISAB, Cambridge, United Kingdom of Great Britain and Northern Ireland (the). http://hdl.handle.net/20.500.12708/94282 ( reposiTUm)

Povoden-Karadeniz, E., Lang, P., Cirstea, D., Wojcik, T., & Kozeschnik, E. (2014). Thermodynamics of Ti-Ni-based shape memory alloys extended by Cu-addition. IC-CMTP 3, Miskolc, Hungary. http://hdl.handle.net/20.500.12708/93949 ( reposiTUm)

Lang, P., Shan, Y., & Kozeschnik, E. (2014). The life-time of structural vacancies in the presence of solute trapping. ICAA14, Trondheim, Norway. http://hdl.handle.net/20.500.12708/94283 ( reposiTUm)

Mayer, W., Shan, Y., & Kozeschnik, E. (2014). A dislocation trapping-based model for tempering of martensite. OPTIMOM 2014, Oxford, United Kingdom of Great Britain and Northern Ireland (the). http://hdl.handle.net/20.500.12708/94187 ( reposiTUm)

Zamberger, S., Lang, P., Klösch, G., Klarner, J., Mori, G., & Kozeschnik, E. (2014). Long-range diffusion of H in the presence of traps in a microalloyed steel. OPTIMOM 2014, Oxford, United States of America (the). http://hdl.handle.net/20.500.12708/94292 ( reposiTUm)

Fischer, F. D., Kozeschnik, E., Mori, G., & Svoboda, J. (2014). The influence of traps on the diffusion of interstitial. Colloquium Material Modelling IMWF, Stuttgart, Germany. http://hdl.handle.net/20.500.12708/94293 ( reposiTUm)

Redermeier, A., & Kozeschnik, E. (2014). Interfacial free energies from Lattice Monte Carlo simulations. 8th Seminar of Central European PhD Students: Research in Material Science, Budapest, Hungary. http://hdl.handle.net/20.500.12708/93954 ( reposiTUm)

Mayer, W., Krizan, D., & Kozeschnik, E. (2014). Simulation of carbo-nitride precipitation in the multi-phase microstructure. 8th Seminar of Central European PhD Students: Research in Material Science, Budapest, Hungary. http://hdl.handle.net/20.500.12708/93909 ( reposiTUm)

Povoden-Karadeniz, E., Moszner, F., Lang, P., Pogatscher, S., Uggowitzer, P. J., & Kozeschnik, E. (2014). Thermodynamics of the Pd-Mn system and phase stability of L10-base Pd1-xMn1-yFex+y. Calphad XLIII, Changsha, China. http://hdl.handle.net/20.500.12708/93945 ( reposiTUm)

Shan, Y., Mayer, W., & Kozeschnik, E. (2014). Thermodynamics of Carbon Trapping at Dislocations in Martensite. Calphad XLIII, Changsha, United States of America (the). http://hdl.handle.net/20.500.12708/93943 ( reposiTUm)

Kozeschnik, E. (2014). Predictive simulation of multi-component precipitation - Where are we, and where are we going? “OMD 2014”. The fundamental problems. Innovative Materials and Technologies, Moskau, Russian Federation (the). http://hdl.handle.net/20.500.12708/94290 ( reposiTUm)

Povoden-Karadeniz, E., Moszner, F., Pogatscher, S., Uggowitzer, P. J., & Kozeschnik, E. (2014). Kinetic simulation of the reverse martensite (alpha’) to austenite (gamma) transformation (alpha’--#gtgamma) in Fe-Mn-Pd. MSE 2014, Darmstadt, Germany. http://hdl.handle.net/20.500.12708/93948 ( reposiTUm)

Lückl, M., Ilie, S., Six, J., & Kozeschnik, E. (2014). The Influence of Surface Microstructure Control Cooling on the Hot Ductility of Microalloyed Steel. MSE 2014, Darmstadt, Germany. http://hdl.handle.net/20.500.12708/93934 ( reposiTUm)

Stechauner, G., & Kozeschnik, E. (2014). Simulation of precipitation kinetics and strengthening in high-alloyed steel. MSE 2014, Darmstadt, Germany. http://hdl.handle.net/20.500.12708/93908 ( reposiTUm)

Kozeschnik, E. (2013). Multiscale simulations of multi-component phases. 5th ViCoM Workshop, Schlaining, Austria. http://hdl.handle.net/20.500.12708/93798 ( reposiTUm)

Dépinoy, S., Toffolon-Masclet, C., Gourgues-Lorenzon, A.-F., & Kozeschnik, E. (2013). Experimental determination and modeling of Austenite grain growth in 2.25 Cr-1Mo steel. Calphad XlII, San Sebastian, Spanien, EU. http://hdl.handle.net/20.500.12708/93801 ( reposiTUm)

Adjassoho, B., Kozeschnik, E., Lechner, C., Habersohn, C., Bleicher, F., Gössinger, S., Bauer, C., Heindl, F., Rodríguez Ripoll, M., & Tomastik, C. (2013). Controlled surfaces treatment with MAchine Hammer Peening. METAL 2013, Brno, Czechia. http://hdl.handle.net/20.500.12708/93856 ( reposiTUm)

Wojcik, T., & Kozeschnik, E. (2013). Schichtweises Wachstum von (Nb,Ti)(C,N) Ausscheidungen während der zyklischen Abkühlung von mikrolegiertem Stahl. 59. Metallkunde-Kolloquium, Lech am Arlberg, Austria. http://hdl.handle.net/20.500.12708/93790 ( reposiTUm)

Kozeschnik, E. (2013). Modeling precipitation in primary solidification microstructures - accounting for microsegregation and heterogeneous nucleation. SinoGerman Workshop, Bochum, EU. http://hdl.handle.net/20.500.12708/93794 ( reposiTUm)

Ahmadi, M. R., Falahati, A., & Kozeschnik, E. (2013). Modified equations for precipitation strengthening in Al- Cu alloys taking into account precipitate shape. Euro LightMAT Conference 2013, Bremen, Germany, EU. http://hdl.handle.net/20.500.12708/93785 ( reposiTUm)

Fischer, F. D., Kozeschnik, E., Mori, G., & Svoboda, J. (2013). Hydrogen diffusion in pipe(line) steels revisited. 59. Metallkunde-Kolloquium, Lech am Arlberg, Austria. http://hdl.handle.net/20.500.12708/93789 ( reposiTUm)

Ahmadi, M. R., Whitmore, L. C., Povoden-Karadeniz, E., Stockinger, M., Falahati, A., & Kozeschnik, E. (2013). Precipitation strengthening in multi-phase systems - Modeling and application to superalloy 718Plus. THERMEC 2013, Las Vegas, United States of America (the). http://hdl.handle.net/20.500.12708/93796 ( reposiTUm)

Kozeschnik, E. (2013). Predictive simulation of multi-component precipitation - Where are we, and where are we going? ETH Seminar, Zürich, Switzerland. http://hdl.handle.net/20.500.12708/93791 ( reposiTUm)

Falahati, A., Wu, J., Lang, P., Ahmadi, M. R., Povoden-Karadeniz, E., & Kozeschnik, E. (2013). Assessment of parameters for precipitation simulation of heat treatable aluminum alloys using differential scanning calorimetry. The first Asian Conference on Aluminum Alloys (ACAA-2013), Peking, China. http://hdl.handle.net/20.500.12708/93734 ( reposiTUm)

Rath, M., & Kozeschnik, E. (2013). Coupled grain growth and precipitation modeling in multi-phase systems. 5th International Conference on Recrystallization and Grain Growth, Sydney, Australia. http://hdl.handle.net/20.500.12708/93741 ( reposiTUm)

Six, J., Wojcik, T., Ilie, S., & Kozeschnik, E. (2013). Correlation between interparticle distance of precipitates and the high-temperature part of the second ductility minimum of micro-alloyed steels. ISIJ-VDEh-JK-Symposium on Metallurgy, Osaka, Japan. http://hdl.handle.net/20.500.12708/93799 ( reposiTUm)

Radis, R., Stockinger, M., Hagspiel, M., Sommitsch, C., & Kozeschnik, E. (2013). The effect of grain size evolution during solution heat treatment on δ-phase precipitation in ATI ALLVAC 718 PLUS. THERMEC 2013, Las Vegas, United States of America (the). http://hdl.handle.net/20.500.12708/93797 ( reposiTUm)

Wojcik, T., & Kozeschnik, E. (2013). Thermo-kinetic simulation of TTP-diagrams for NbC precipitation in austenite. MS&T 2013, Montreal, Canada. http://hdl.handle.net/20.500.12708/93698 ( reposiTUm)

Povoden-Karadeniz, E., Kozeschnik, M., & Kozeschnik, E. (2013). Investigation of gamma’ precipitation in Ni-base superalloy PWA1480 by interrupted cooling coupled with thermo-kinetic simulation. 2nd world congress of integrated computational materials engineering, ICME 2013, Utah, United States of America (the). http://hdl.handle.net/20.500.12708/93686 ( reposiTUm)

Povoden-Karadeniz, E., Lang, P., & Kozeschnik, E. (2013). Assessment of thermodynamic data assisted by physically-based thermokinetic modeling. 2nd world congress of integrated computational materials engineering, ICME 2013, Utah, United States of America (the). http://hdl.handle.net/20.500.12708/93685 ( reposiTUm)

Stechauner, G., & Kozeschnik, E. (2013). Grain boundary and dislocation pipe diffusion in Al, Fe and Ni. EUROMAT 2013, Sevilla, Spain. http://hdl.handle.net/20.500.12708/93703 ( reposiTUm)

Wojcik, T., & Kozeschnik, E. (2013). Shell-wise growth of (Nb,Ti)(C,N) precipitates during cyclic cooling of microalloyed steel. EUROMAT 2013, Sevilla, Spain. http://hdl.handle.net/20.500.12708/93697 ( reposiTUm)

Mayer, W., Kozeschnik, E., & Krizan, D. (2013). Simulation of carbo-nitride precipitation in the multi-phase microstructure of low-carbon steel. EUROMAT 2013, Sevilla, Spain. http://hdl.handle.net/20.500.12708/93664 ( reposiTUm)

Povoden-Karadeniz, E., Kozeschnik, M., & Kozeschnik, E. (2013). Energy of coherent gamma/gamma’ phase boundaries close to the solution temperature in the Ni-base superalloy PWA1480. Calphad XlII, San Sebastian, Spain. http://hdl.handle.net/20.500.12708/93684 ( reposiTUm)

Povoden-Karadeniz, E., Vujic, S., Hadke, S. S., & Kozeschnik, E. (2013). Thermodynamic modeling and simulation of TTP diagrams in stainless steel. Calphad XlII, San Sebastian, Spain. http://hdl.handle.net/20.500.12708/93683 ( reposiTUm)

Falahati, A., Lang, P., Ahmadi, M. R., Danninger, A., & Kozeschnik, E. (2013). Influence of Natural Aging and Pre-deformation on Precipitation Kinetics and Tensile Properties of Artificially Aged Al-Mg-Si-(Cu) Alloys. 6th international Light Metals Technology Conference (LMT 2013), Old Windsor, United Kingdom of Great Britain and Northern Ireland (the). http://hdl.handle.net/20.500.12708/93733 ( reposiTUm)

Ahmadi, M. R., Falahati, A., & Kozeschnik, E. (2012). Modified equations for precipitation strengthening in Al- Cu-(Mg) alloys (taking into account precipitate shape). MSE Conference 2012, Darmstadt, Germany, EU. http://hdl.handle.net/20.500.12708/93784 ( reposiTUm)

Warczok, P., Shan, Y., & Kozeschnik, E. (2012). Lattice Monte Carlo analysis of vacancy diffusion in the presence of discrete trapping. 8th International Conference on Diffusion in Solids and Liquids - DSL-2012, Istanbul, Türkei, Non-EU. http://hdl.handle.net/20.500.12708/93488 ( reposiTUm)

Lang, P., Povoden-Karadeniz, E., Ahmadi, M. R., Falahati, A., & Kozeschnik, E. (2012). Through-process precipitation modeling in Al alloys. Vienna_tec 2012 / Join Ex, Wien, Austria. http://hdl.handle.net/20.500.12708/93472 ( reposiTUm)

Povoden-Karadeniz, E., Cirstea, D., Lang, P., & Kozeschnik, E. (2012). Thermodynamic modeling of metastable phases for precipitation simulation in NiTi shape memory alloys. Calphad XLI, Berkley, USA, Non-EU. http://hdl.handle.net/20.500.12708/93434 ( reposiTUm)

Povoden-Karadeniz, E., & Kozeschnik, E. (2012). Simulation of precipitation kinetics and precipitation strengthening of B2-precipitates in martensitic PH 13-8 Mo steel. MS&T 2012, Pittsburgh, Pennsilvania, USA, Non-EU. http://hdl.handle.net/20.500.12708/93435 ( reposiTUm)

Povoden-Karadeniz, E., & Kozeschnik, E. (2012). Thermodynamic modeling of the Mo-Hf-C system and simulation of precipitate evolution in Mo-2Hf-0.2C alloy. MS&T 2012, Pittsburgh, Pennsilvania, USA, Non-EU. http://hdl.handle.net/20.500.12708/93436 ( reposiTUm)

Warczok, P., Shan, Y., & Kozeschnik, E. (2012). Lattice Monte Carlo analysis of vacancy diffusion. Materials Science and Engineering - MSE 2012, Darmstadt, EU. http://hdl.handle.net/20.500.12708/93519 ( reposiTUm)

Wu, J., Kozeschnik, E., & Falahati, A. (2012). Thermo-kinetic computer simulation of DSC curve of Al-Cu-Mg alloys. Materials Science and Engineering - MSE 2012, Darmstadt, EU. http://hdl.handle.net/20.500.12708/93559 ( reposiTUm)

Vincent, S., Lang, P., & Kozeschnik, E. (2012). Optimization of the fabrication process of 6061 aluminum alloys using experiments and thermokinetic simulations. Calphad XLI, Berkley, USA, Non-EU. http://hdl.handle.net/20.500.12708/93476 ( reposiTUm)

Shan, Y., Svoboda, J., Fischer, F. D., & Kozeschnik, E. (2012). Diffusion of Interstitial Components in Systems with Traps. Materials Science and Engineering - MSE 2012, Darmstadt, EU. http://hdl.handle.net/20.500.12708/93518 ( reposiTUm)

Povoden-Karadeniz, E., Warczok, P., Lang, P., Falahati, A., Ahmadi, M. R., & Kozeschnik, E. (2011). Thermodynamic modeling of metastable phases in Al-Cu-Mg-Si and applications to precipitation kinetics simulations. Calphad XL, Rio de Janeiro, Non-EU. http://hdl.handle.net/20.500.12708/93240 ( reposiTUm)

Povoden-Karadeniz, E., Eidenberger, E., Leitner, H., & Kozeschnik, E. (2011). Thermodynamics of the Fe-Co-Mo system and modeling of early precipitation in Fe-25 at.% Co-9 at.% Mo alloy. Calphad XL, Rio de Janeiro, Non-EU. http://hdl.handle.net/20.500.12708/93241 ( reposiTUm)

Ahmadi, M. R., Kozeschnik, E., & Falahati, A. (2011). Strengthening simulation in Al-Mg-Si (Cu) alloys based on modified strengthening equations considering precipitate shapes. European Conference on Aluminium Alloys - ECAA 2011, Bremen, Germany, EU. http://hdl.handle.net/20.500.12708/93783 ( reposiTUm)

Kozeschnik, E., Warczok, P., & Zenisek, J. (2011). Diffusion und Koagulation von Ausscheidungs-Clustern - Simulation auf atomistischer und Kontinuums-Skala. 57. Metallkunde Kolloquium, Lech am Arlberg, Austria. http://hdl.handle.net/20.500.12708/93268 ( reposiTUm)

Radis, R., & Kozeschnik, E. (2011). Numerische Simulation der AlN Ausscheidung in Stahl. 57. Metallkunde Kolloquium, Lech am Arlberg, Austria. http://hdl.handle.net/20.500.12708/93269 ( reposiTUm)

Kozeschnik, E. (2011). Mg - vacancy binding in fcc Al. European Aluminium Technology Platform - Working Group 5: Predictive Modelling, Aachen, Germany, EU. http://hdl.handle.net/20.500.12708/93270 ( reposiTUm)

Radis, R., & Kozeschnik, E. (2011). The Precipitation Kinetics of Nb(C,N) in Plastically Deformed Microalloyed Steel. Euromat 2011, Montpellier, EU. http://hdl.handle.net/20.500.12708/93271 ( reposiTUm)

Kozeschnik, E. (2011). Modelling of the Material Steel - Basics, Limits, Trends. voestalpine Synergieplattform, voestalpine Stahlwelt Linz, Austria, Austria. http://hdl.handle.net/20.500.12708/93272 ( reposiTUm)

Radis, R., Kozeschnik, E., Sommitsch, C., Enzinger, N., Schlacher, C., & Mayr, P. (2011). Loss of ductility caused by AlN precipitates in Hadfield steel. THERMEC 2011, International Conference on PROCESSING & MANUFACTURING OF ADVANCED MATERIALS Processing, Fabrication, Properties, Applications, Quebec - Canada, Non-EU. http://hdl.handle.net/20.500.12708/93273 ( reposiTUm)

Kozeschnik, E. (2011). Modeling the early stages of solid-state precipitation - Monte Carlo study and continuums simulations. 3rd Sino-German Symposium on Computational Thermodynamics and Kinetics and their applications to Solidification and Solid-state Phase Transformation, Xian, China, Non-EU. http://hdl.handle.net/20.500.12708/93275 ( reposiTUm)

Warczok, P., Zenisek, J., & Kozeschnik, E. (2011). Analysis of the influence of vacancy-solute interaction on diffusion of atomic monomers and clusters. TMS Meeting, Seattle, United States of America (the). http://hdl.handle.net/20.500.12708/93274 ( reposiTUm)

Povoden-Karadeniz, E., Warczok, P., Lang, P., Falahati, A., Ahmadi, M. R., & Kozeschnik, E. (2010). Thermodynamic Modeling of Guinier-Preston-zones in the Al-Mg-Si System. ISMANAM 2010, 17th International Symposium on Metastable, Amorphous and Nanostructured Materials, Zürich, Non-EU. http://hdl.handle.net/20.500.12708/93071 ( reposiTUm)

Radis, R., & Kozeschnik, E. (2010). Numerical Simulations of the Precipitation Kinetics of gamma’ in UDIMET 720 Li using the Thermo-Kinetic Software MatCalc. Modeling Seminar UBC, University of British Columbia, Vancouver, Kanada, Non-EU. http://hdl.handle.net/20.500.12708/92973 ( reposiTUm)

Povoden-Karadeniz, E., Warczok, P., Lang, P., Falahati, A., & Kozeschnik, E. (2010). A thermodynamic model of Guinier-Preston-zones in the Al-Mg-Si system. Calphad XXXIX, Jeju, Südkorea, Non-EU. http://hdl.handle.net/20.500.12708/93070 ( reposiTUm)

Kozeschnik, E. (2010). Modeling solid-state phase transitions on atomistic and continuums scale. Workshop “Novel materials and superconductors,” Planneralm, Austria. http://hdl.handle.net/20.500.12708/93267 ( reposiTUm)

Kozeschnik, E. (2010). Thermo-kinetic modeling of multi-component multi-phase multi-particle precipitation. International Conference on Physical and Numerical Simulation of Materials Processing, Guilin, China, Non-EU. http://hdl.handle.net/20.500.12708/93266 ( reposiTUm)

Zenisek, J., Kozeschnik, E., Svoboda, J., & Fischer, F. D. (2010). Impact of microscopic chemical fluctuations on precipitation in interstitial / substitutional systems. PTM 2010 Solid-Solid Phase Transformation in Inorganic Materials, Avignon, EU. http://hdl.handle.net/20.500.12708/93037 ( reposiTUm)

Kozeschnik, E. (2009). Modeling solid-state precipitation on different scales. Workshop CompMat 2009, Schlaining, Austria. http://hdl.handle.net/20.500.12708/92901 ( reposiTUm)

Burzic, D., Zamberger, J., & Kozeschnik, E. (2009). Nondestructive Evaluation of the Decarburization Depth of Spring Steel with Electromagnetic Measurement Methods. Materials Science & Technology 2009, Pittsburgh (USA), Non-EU. http://hdl.handle.net/20.500.12708/92927 ( reposiTUm)

Kozeschnik, E. (2009). Modeling phase transformations with MatCalc. Höganäs Chair Seminar, Vienna, Austria. http://hdl.handle.net/20.500.12708/92898 ( reposiTUm)

Radis, R., & Kozeschnik, E. (2009). Modelling and Simulation of Second Phase Precipitation in (HSLA) Microalloyed Steels. Christian Doppler Laboratory - Workshop, Semmering, Austria. http://hdl.handle.net/20.500.12708/92942 ( reposiTUm)

Radis, R., & Kozeschnik, E. (2009). Kinetics of AlN and VN Precipitation in Microalloyed Steel. Evaluierung Christian Doppler Laboratory - Early Stages of Precipitation, Wien, Austria. http://hdl.handle.net/20.500.12708/92943 ( reposiTUm)

Imtiaz, F., & Kozeschnik, E. (2009). Isothermal Austenite Decomposition in Low to Ultra-low Carbon Steels. THERMEC 2009, Berlin, EU. http://hdl.handle.net/20.500.12708/92952 ( reposiTUm)

Kozeschnik, E., Warczok, P., Shan, Y., Radis, R., Holzer, I., Sonderegger, B., Svoboda, J., & Fischer, F. D. (2009). Modeling solid-state precipitation on different length scales. 1st International Conference on Material Modelling, Dortmund, EU. http://hdl.handle.net/20.500.12708/92866 ( reposiTUm)

Kozeschnik, E., Svoboda, J., Radis, R., & Fischer, F. D. (2009). Modeling precipitation of AlN at austenite grain boundaries. THERMEC 2009, Berlin, EU. http://hdl.handle.net/20.500.12708/92865 ( reposiTUm)

Stockinger, M., Stotter, C., Sommitsch, C., Kozeschnik, E., Radis, R., & Huber, D. (2008). Numerical Modeling of the Delta Phase Precipitation Kinetic in the Superalloy Allvac718Plus. Aeromat 2008, Austin, Texas, USA, Non-EU. http://hdl.handle.net/20.500.12708/92941 ( reposiTUm)

Burzic, D., Schröttner, H., Chernev, B., & Kozeschnik, E. (2008). Characterization of Oxide Scale Formation on High Silicon Spring Steel. Materials Science and Engineering - MSE 2008, Nürnberg, EU. http://hdl.handle.net/20.500.12708/92926 ( reposiTUm)

Radis, R., & Kozeschnik, E. (2008). Aluminium nitride precipitation at austenite grain boundaries in microalloyed HSLA steels. MatCalc Workshop, TU Wien, Austria. http://hdl.handle.net/20.500.12708/92944 ( reposiTUm)

Reports

Bleicher, F., Lechner, C., Habersohn, C., Gössinger, S., Bauer, C., Kozeschnik, E., Adjassoho, B., Rodríguez Ripoll, M., Heindl, F., & Jech, M. (2013). Tribological effects of structured and densified surfaces (No. 1). http://hdl.handle.net/20.500.12708/38079 ( reposiTUm)

Radis, R., & Kozeschnik, E. (2010). Kinetics of AlN precipitation in microalloyed steel (Report B2-09-02). http://hdl.handle.net/20.500.12708/36194 ( reposiTUm)

Radis, R., & Kozeschnik, E. (2010). Concurrent precipitation of AlN and VN in microalloyed steel (Report B2-09-03). http://hdl.handle.net/20.500.12708/36195 ( reposiTUm)

Radis, R., Zamberger, S., & Kozeschnik, E. (2010). Simulation of the precipitation of nitrides and carbides taking into account the seggregation of alloying elements during solidification (Report B2-09-01). http://hdl.handle.net/20.500.12708/36193 ( reposiTUm)

Radis, R., & Kozeschnik, E. (2009). Ausscheidungskinetik von NiAl und rückumgewandeltem Austenit im Maraging Stahl N 709 (No. B2-03). http://hdl.handle.net/20.500.12708/36084 ( reposiTUm)

Radis, R., & Kozeschnik, E. (2009). Die Ausscheidungskinetik von Aluminiumnitrid und Vanadiumnitrid im Austenitgebiet in mikrolegierten Stählen (No. B2-01). http://hdl.handle.net/20.500.12708/36085 ( reposiTUm)

Radis, R., & Kozeschnik, E. (2009). Berechnung der Phasenmengendiagramme im Gleichgewicht und der Änderung der Wärmekapazität hervorgerufen durch Ausscheidungen in den Stählen 38MnVS6, PK18, RN20FLZ, RN22NBS (No. B2-02). http://hdl.handle.net/20.500.12708/36086 ( reposiTUm)

Radis, R., & Kozeschnik, E. (2009). Interaction of the Precipitation Kinetics of Delta and Gamma’ Phases in Ni base Superalloy ATI Allvac® 718PlusTM (No. B2-04). http://hdl.handle.net/20.500.12708/36087 ( reposiTUm)

Zaruba, C., & Kozeschnik, E. (2009). Non destructive metallographic investigation of a suction roll shell (86/2009). http://hdl.handle.net/20.500.12708/35904 ( reposiTUm)

Zaruba, C., & Kozeschnik, E. (2009). Report on the investigation of a broken cardan shaft (10/2009). http://hdl.handle.net/20.500.12708/35898 ( reposiTUm)

Zaruba, C., & Kozeschnik, E. (2009). Bericht über die Untersuchung einer gebrochenen Schlauchtülle eines Flexschlauches zu einem WC-Spülkasten (19/2009). http://hdl.handle.net/20.500.12708/35901 ( reposiTUm)

Zaruba, C., & Kozeschnik, E. (2009). Bericht über die mikroanalytische Untersuchung von Oberflächenartefakten an Schweissprozessbändern (81/2009). http://hdl.handle.net/20.500.12708/35900 ( reposiTUm)

Mohn, P., Hafner, J., Dellago, C., Kresse, G., Kahl, G., Podloucky, R., Redinger, J., Blaha, P., Held, K., & Kozeschnik, E. (2008). Center for Computational Materials Science: Progress report 2005-2008. http://hdl.handle.net/20.500.12708/35066 ( reposiTUm)

Kozeschnik, E., Linhardt, P., & Zaruba, C. (2008). Vergleichende Analysen an emaillierten Schmuckreifen (No. 85–2008). http://hdl.handle.net/20.500.12708/35271 ( reposiTUm)

Kozeschnik, E., & Zaruba, C. (2008). Bericht über die Untersuchung einer gebrochenen Kardanwelle (No. 55–2008). http://hdl.handle.net/20.500.12708/35270 ( reposiTUm)