IEEE International Electric Machines and Drives Conference (IEMDC)

Event name
IEEE International Electric Machines and Drives Conference (IEMDC)
 
Event type
Event for scientific audience
 
Start date
15-05-2005
End date
18-05-2005
 
Location
San Antonio, TX
Country
United States
 
Event format Veranstaltungsformat
On Site

Publications Publikationen

Results 1-15 of 15 (Search time: 0.002 seconds).

PreviewAuthors / EditorsTitleTypeIssue Date
1Hofer, Matthias ; Schrödl, Manfred An Analysis of Ferrite Magnet Assisted Synchronous Reluctance Machines for Low Power Drives Including Flux WeakeningKonferenzbeitrag Inproceedings2019
2Schmidt, Erich ; Strobach, Michael ; Hamberger, Peter Analytical Approach for the Calculation of the Stray Field of Large Power TransformersKonferenzbeitrag Inproceedings 2009
3Samonig, Matthias ; Wolbank, Thomas M. Analyzing the Influence of Induction Machine Design on Transient Slot Leakage Inductance with respect to Sensorless Rotor Position EstimationKonferenzbeitrag Inproceedings2017
4Hofer, Matthias ; Schmidt, Erich ; Schrödl, Manfred Comparison of a Solid and a Laminated Rotor for Sensorless Control of Radial Active Magnetic BearingsKonferenzbeitrag Inproceedings 2009
5Wolbank, Thomas M. ; Metwally, Mohamed Comparison of Inherent Saliency Tracking Methods for Zero Speed Sensorless Control of Standard Induction MachinesKonferenzbeitrag Inproceedings 2009
6Eilenberger, Andreas ; Heissenberger, Johannes ; Kogler, Florian ; Schrödl, Manfred Comparison of outer rotor PMSM with different pitch factors of q=1/2 and q=1/4 at same rotor geometryKonferenzbeitrag Inproceedings 2009
7Winter, Oliver ; Kral, Chrtistian ; Schmidt, Erich Design and Loss Assessment of Air Cored Axial Flux Permanent Magnet MachinesKonferenzbeitrag Inproceedings2013
8Hofer, Matthias ; Spießberger, Jürgen ; Schrödl, Manfred Design and sensorless control of a reluctance synchronous machine for a magnetically levitated DrivePräsentation Presentation2015
9Wolbank, Thomas M. ; Macheiner, Peter Detection of airgap asymmetry in induction machines with different pole pair number using the current step responseKonferenzbeitrag Inproceedings2007
10Stojcic, Goran ; Wolbank, Thomas M. Detection of Defects in Stator Winding of Inverter Fed Induction MachinesKonferenzbeitrag Inproceedings2013
11Schmidt, Erich ; Hofer, Matthias Inductances and Forces of a Three Phase Permanent Magnet Biased Radial Active Magnetic Bearing in Dependence on the Rotor EccentricityKonferenzbeitrag Inproceedings 2009
12Schmidt, Erich ; Traxler-Samek, G. ; Schwery, Alexander Influence of Higher Harmonics in the End Region Magnetic Field on Eddy Currents in the Stator Clamping System of Hydro GeneratorsKonferenzbeitrag Inproceedings 2005
13Zöller, Clemens ; Wolbank, Thomas M. ; Vogelsberger, Markus Insulation Condition Monitoring of Traction Drives based on Transient Current Signal Resulting from Differential and Common Mode ExcitationKonferenzbeitrag Inproceedings 2015
14Wolbank, Thomas M. ; Giuliani, Harald ; Wöhrnschimmel, Reinhard ; Machl, Jürgen 'Sensorless Control of Induction Machines by Combining Fundamental Wave Models with Transient Excitation TechniqueKonferenzbeitrag Inproceedings 2005
15Wolbank, Thomas M. ; Stumberger, Ronald Horst ; Lechner, A. ; Machl, Jürgen Strategy for online adaptation of the inverter switching frequency imposed by a predictive current controller'Konferenzbeitrag Inproceedings 2009