Requena, Guillermo Carlos

Network Lab View Statistics Email Alert RSS Feed

Name Card

Full name Familienname, Vorname
Requena, Guillermo Carlos
 
Main Affiliation Organisations­zuordnung
 

Own Publications Eigene Publikationen

Filter:
Subject:  Mechanical Engineering

Results 1-19 of 19 (Search time: 0.004 seconds).

PreviewAuthor(s)TitleTypeIssue Date
1Bugelnig, Katrin ; Sket, Federico ; Germann, Holger ; Steffens, Thomas ; Koos, Robert ; Wilde, Fabian ; Boller, Elodie ; Requena, Guillermo Influence of 3D connectivity of rigid phases on damage evolution during tensile deformation of an AlSi12Cu4Ni2 piston alloyArtikel Article 2018
2Barriobero Vila, Pere ; Requena, Guillermo ; Warchomicka, Fernando ; Stark, Andreas ; Schell, Norbert ; Buslaps, Thomas Phase transformation kinetics during continuous heating of a β-quenched Ti-10V-2Fe-3Al alloyArtikel Article 2015
3Barriobero Vila, Pere ; Requena, Guillermo ; Buslaps, Thomas ; Alfeld, Matthias ; Boesenberg, Ulrike Role of element partitioning on the α-β phase transformation kinetics of a bi-modal Ti-6Al-6V-2Sn alloy during continuous heatingArtikel Article 2015
4Asghar, Zahid ; Requena, Guillermo ; Zahid, G. H. ; Rafi-Ud-Din, R. Effect of thermally stable Cu- and Mg-rich aluminides on the high temperature strength of an AlSi12CuMgNi alloyArtikel Article Feb-2014
5Asghar, Z. ; Requena, G. Three dimensional post-mortem study of damage after compression of cast Al-Si alloysArtikel Article2014
6Requena, Guillermo ; Maire, Eric ; Leguen, Claire ; Thuillier, Sandrine Separation of nucleation and growth of voids during tensile deformation of a dual phase steel using synchrotron microtomographyArtikel Article2014
7Troufflard, Julien ; Requena, Guillermo ; Thuillier, Sandrine ; Maire, Éric Ductile damage in tension and bending for DP980 steel sheetsArtikel Article2013
8Tolnai, D. ; Requena, G. ; Cloetens, P. ; Lendvai, J. ; Degischer, H.P. Effect of solution heat treatment on the internal architecture and compressive strength of an AlMg4.7Si8 alloyArtikel Article2013
9Tolnai, Domonkos ; Szakács, Gábor ; Requena, Guillermo ; Stark, Andreas ; Schell, Norbert ; Kainer, Karl Ulrich ; Hort, Norbert Study of the solidification of AS alloys combining in situ synchrotron diffraction and differential scanning calorimetryArtikel Article2013
10Kastner, Johann ; Plank, Bernhard ; Requena, Guillermo Non-destructive characterisation of polymers and Al-alloys by polychromatic cone-beam phase contrast tomographyArtikel Article2012
11Tolnai, D. ; Requena, G. ; Cloetens, P. ; Lendvai, J. ; Degischer, H.P. Sub-micrometre holotomographic characterisation of the effects of solution heat treatment on an AlMg7.3Si3.5 alloyArtikel Article2012
12Kastner, Johann ; Harrer, Bernhard ; Requena, Guillermo ; Brunke, Oliver A comparative study of high resolution cone beam X-ray tomography and synchrotron tomography applied to Fe- and Al-alloysArtikel Article Oct-2010
13Asghar, Z. ; Requena, G. ; Kubel, F. The role of Ni and Fe aluminides on the elevated temperature strength of an AlSi12 alloysArtikel Article2010
14Requena, G. ; Cloetens, P. ; Altendorfer, W. ; Poletti, C. ; Tolnai, D. ; Warchomicka, F. ; Degischer, H.P. Sub-micrometer synchrotron tomography of multiphase metals using Kirkpatrick-Baez opticsArtikel Article2009
15Balog, Martin ; Simancik, Frantisek ; Bajana, Otto ; Requena, Guillermo ECAP vs. direct extrusion-Techniques for consolidation of ultra-fine Al particlesArtikel Article2009
16Requena, Guillermo C. ; Degischer, Peter ; Marks, Esteban D. ; Boller, Elodie Microtomographic study of the evolution of microstructure during creep of an AlSi12CuMgNi alloy reinforced with Al2O3 short fibresArtikel Article2008
17Requena, G.C. ; Degischer, H.P. ; Marks, E.D. ; Boller, E. Entwicklung der Konnektivität der Phasen in einer kurzfaserverstärkten Aluminium-Kolbenlegierung unter KriechbelastungArtikel Article 14-Nov-2007
18Schöbel, M. ; Requena, G. ; Degischer, H. P ; Kaminski, H. ; Buslaps, T. ; di Michiel, M. Thermische Ausdehnung, innere Spannungen und Porenverteilung in AlSiCp MetallmatrixverbundwerkstoffeArtikel Article 2007
19Requena, G. ; Degischer, H.P. Creep behavior of unreinforced and short fibre reinforced AlSi12CuMgNi piston alloyArtikel Article2006

Contributing Publications Mitbeteiligte Publikationen

Filter:
Subject:  Mechanical Engineering

Results 1-2 of 2 (Search time: 0.002 seconds).

PreviewAuthor(s)TitleTypeIssue Date
1Pfaffinger, Markus ; Mitteramskogler, Gerald ; Gmeiner, Robert ; Stampfl, Jürgen Thermal Debinding of Ceramic-Filled PhotopolymersKonferenzbeitrag Inproceedings 2015
2Archodoulaki, Vasiliki Maria ; Merola, Massimiliano ; Kastanis, Dimitrios ; Koch, Thomas ; Carlone, Pierpaolo Influence of the Impregnation Velocity on Impregnation Quality and Mechanical Properties of Vacuum Assisted Resin Transfer Moulding (VARTM) MaterialsKonferenzbeitrag Inproceedings 2015