dc.description
CONTENT:
COMPRESSOR AND COMPONENT DESIGN
One year’s successful industrial test of a new all-electric capacity control system
by: Saillard Delphine – Air Liquide; Benoni Albert, Gerhard Hölzl – HOERBIGER 3
Your Gas Compression Application – Reciprocating, Centrifugal, or Screw?
by: Greg Phillippi, Ben Williams – Ariel Corporation; Tim Manthey – Aerzen USA; Jonathan Sutter – Elliott Group;
Bruce McCain – Oxy Permian 9
Large Reciprocating Compressor Modules – A new integrated design process to minimize all risks related to this
challenging application
by: Simone Bassani, Riccardo Bagagli*, Marco Passeri, Leonardo Sapuppo – BH Nuovo Pignone 19
Innovative Remediation Techniques to Compressor Foundation Systems
by: Christopher Matthews-Ewald – ITW Performance Polymers 31
Accurate load limit determination of reciprocating compressor components
by: Gerhard Knop, Dr. Klaus Hoff – Neuman & Esser GmbH & Co. KG 41
AVAILABILITY AND REBLIABILITY
Maximizing run-time and predicting performance of compressor pistons
by: Andreas Brandl, John Ladd, Cory Bulloch – HOERBIGER Service Inc. 53
Fabrication of test bench for reciprocating compressors valve and choosing proper valve leakage testing procedure
according to experimental results.
by: Fouladivanda Mojtaba, Sadeghi Vahid, Momeni Omid – Iran Chemical Industries Investment Company 65
A Case Study on Modernising the Maintenance Management of Reciprocating Gas Compressors
by: Kenneth Burns, Ramin Rahnama – Wood 77
DIGITALISATION AND AI
What ́s going on with my recip? How uncommon failure modes get detected.
by: Gaia Rossi, Thorsten Bickmann, Fayyaz Qureshi – Bently Nevada, a Baker Hughes business 87
Valve Data Acquisition throughout the Life Cycle
by: M. Schiavone, A. Raggi, A. Giampà, G. Ballerini – Dott. Ing. Mario COZZANI s.r.l. 97
Introduction of Electronic Control Panels in Reciprocating Gas Compressor packages
by: Baruah Prateek, Oil India Limited 107
Pulsation Damper Optimization with AI
by: Jonah Poort, Can Tümer, Pejman Shoeibi Omrani – TNO, Heat Transfer and Fluid Dynamics 117
Big Data Anomaly Detection Methods for Reciprocating Compressors
by: Can Tümer, Jonah Poort, Pejman Shoeibi Omrani – TNO, Heat Transfer and Fluid Dynamics 127
PULSATIONS AND VIBRATIONS
Validation of Pressure Pulsation and Vibration Analyses in a Reciprocating Compressor for Design Optimization
by: Cappelli Leonardo, Sacco Marco, Fusi Andrea – C.S.T. S.r.l.; Mazzoleni Thomas – SIAD Macchine Impianti
S.p.A. 141
Reduction of Vibration – Modal testing of a reciprocating compressor, theoretical background and practical testing
by: Thomas Heumesser, Ferdinand Marks – J.P. Sauer & Sohn Maschinenbau GmbH 149
Mechanical optimization methodology for reciprocating compressor systems
by: Leonard van Lier, Paul Egberts, Can Tümer – TNO, Department of Heat Transfer and Fluid Dynamics 163
The impact of system parameters on reactive damper transmission loss characteristics – experimental and simulation
approach
by: Warzynska Urszula, Siwulski Tomasz –Wrocław University of Science and Technology 175
Feasibility Study of a Novel Toroidal Damper Concept for Improved High Frequency Pulsation Control
by: André Eijk, Javier Fatou Gómez, Olaf Vijlbrief – TNO; Cyril Wentzel – Wentzel Dynamics 187
Improved plant reliability due to acoustical and vibrational optimisation
by: Dr.-Ing. Patrick Tetenborg, Dr.-Ing. Johann Lenz – KÖTTER Consulting Engineers GmbH & Co. KG 197
SEALING TECHNOLOGY AND EMISSIONS
Oil-free compression of hydrogen – which role plays the crosshead compressor today and in future?
by: Thorsten Harder, Norbert Feistel, Felix Ragg – Burckhardt Compression AG 207
A technological approach to emissions reduction: A case study at a major European refinery
by: Paul Modern – Cook Compression 215
An Improved Dynamic Rod Packing Seal and Eliminating Vent Emissions with a New Static Seal
by: Pascal MAHIEUX, Jonathan WHITE – Compressor Products International 223
Piston Rod Packing Solutions for Reduced Emissions
by: Georg Flade & Marc Langela – STASSKOL GmbH 229
A comprehensive cylinder-lubrication model for reciprocating compressors
by: Bernhard Fritz, Bernhard Schleichl – TU Wien, Institute of Fluid Mechanics and Heat Transfer (E322) 237
Early work supporting future conductive sealing rings to reduce piston rod temperature and wear
by Cyril Wentzel - Wentzel Dynamics; Marc Langela -Stasskol Gmbh 247
-
