<div class="csl-bib-body">
<div class="csl-entry">Thalmeier, R. (2011). <i>A device for simulating network cable failure : development of hardware to simulate typical failures of a 100base-TX network cable remote- and automatable</i> [Diploma Thesis, Technische Universität Wien]. reposiTUm. https://resolver.obvsg.at/urn:nbn:at:at-ubtuw:1-60101</div>
</div>
Übliche 100 Mbit-Netzwerkkabel (100baseTX) haben genaue spezifizierte Betriebsparameter, innerhalb derer sie betrieben werden sollen. In dieser Arbeit wird gezeigt, welche Auswirkungen es auf Datenübertragungen haben kann, wenn solche Parameter nicht eingehalten werden, also beispielsweise Wackelkontakte oder Übergangswiderstände auftreten, unterschiedliche Kabelqualitäten (ohne, mit einfacher, mit doppelter Schirmung) verwendet werden und Ähnliches. Es werden die Auswirkungen verschiedener Kabelfehler auf Datenübertragungen untersucht, indem Modelle von Kabelfehlern erstellt werden und diese dann durch elektronische Schaltungen realisiert werden, über die Daten übertragen werden. Das Ergebnis sind Erkenntnisse und Kennlinienfelder, in denen die Übertragungsfehler einer Datenübertragung in einer Testumgebung in Abhängigkeit von verschieden schwerwiegenden Kabelfehlern dargestellt sind. Außerdem wird ein Gerät entwickelt und gebaut, das in ein Kabel geschaltet zahlreiche Kabelfehler erzeugen kann: falsch verdrahtete Leitungen, Kurzschlüsse, ohmsche, kapazitive und induktive Kabelfehler, Antennen, sowie beliebige Kombinationen aus mehreren dieser Fehler gleichzeitig. Dieser Linkcutter ist vollständig fernkonfigurierbar und sowohl interaktiv als auch vorprogrammiert bedienbar.
de
dc.description.abstract
Regular 100 Mbit-network cables (100baseTX) have strictly specified operating parameters in which they should operate. This work examines the consequences for data transmission when such parameters are violated. For example, if there are slack joints or resistances, or if different cable types (without, with single or with double shielding) are used. The consequences of different cable failures on data transmission are investigated. Therefore models of cable failures are created. These models are implemented as electronic circuits, and tested by transmitting data over the line. The results are data sets and characteristic curves, in which the errors of data transmissions in a test bed are shown in dependency of the severity of different cable failures. Moreover, a device is developed and built, which can be connected in series of a network cable and which can generate a lot of representative cable failures: wrong wired cables, short circuits, ohmic, capacitive and inductive cable faults and antennas, as well as any combination of them simultaneously. This Linkcutter is completely remote-controllable and configurable, and it is useable both interactively and pre-programmed.<br />
en
dc.language
English
-
dc.language.iso
en
-
dc.rights.uri
http://rightsstatements.org/vocab/InC/1.0/
-
dc.subject
100Base-TX
de
dc.subject
Netzwerkkabel
de
dc.subject
Fehler
de
dc.subject
Simulator
de
dc.subject
100Base-TX
en
dc.subject
Network Cable
en
dc.subject
Failure
en
dc.subject
Simulating Device
en
dc.title
A device for simulating network cable failure : development of hardware to simulate typical failures of a 100base-TX network cable remote- and automatable