<div class="csl-bib-body">
<div class="csl-entry">Jäger, A. (2008). <i>Characterization of viscoelastic properties of bitumen by means of nanoindentation as basis for multiscale modeling of asphalt</i> [Dissertation, Technische Universität Wien]. reposiTUm. https://resolver.obvsg.at/urn:nbn:at:at-ubtuw:1-27716</div>
</div>
Im Rahmen des Christian Doppler Laboratoriums für "Gebrauchsverhaltensorientierte Optimierung flexibler Straßenbefestigungen", das 2002 an der Technischen Universität Wien gegründet wurde, wird ein Mehrskalenmodell für Asphalt entwickelt. Das Ziel dieses Mehrskalenmodells ist die Verknüpfung des makroskopischen Verhaltens von Asphalt mit der Materialzusammensetzung und den Materialeigenschaften der einzelnen Bestandteile auf niedrigeren Betrachtungsebenen. Diese Dissertation, die vier Publikationen enthält, beschäftigt sich mit der Identifikation von Materialeigenschaften auf der niedrigsten Ebene der Betrachtung des zuvor erwähnten Mehrskalenmodells, der Bitumen-Ebene. Zu diesem Zweck wird die Nanoindentation eingesetzt. Während sich die Publikationen A, B, und C mit der Entwicklung von neuen Methoden zur Bestimmung von viskoelastischen Materialparametern auf Basis von NI-Versuchsdaten beschäftigen, wird in Publikation D das thermo-rheologische Verhalten von Bitumen und seinen Phasen untersucht.<br />Die Form der Indenterspitze hat einen offensichtlichen Einfluss auf die zu bestimmenden Modellparameter. In Publikation A ("Identifizierung von viskoelastischen Eigenschaften mittels Nanoindentation unter Berücksichtigung der realen Spitzengeometrie") wird dieser Einfluss untersucht. Dabei werden bestehende Modelle zur Bestimmung von viskoelastischen Modellparametern auf durch die Standardkalibrierung des Nanoindenters bekannte allgemeine Spitzenformen erweitert. Im allgemeinsten Fall zeigt das indentierte Material sowohl viskoelastische wie auch plastische Deformationen. In Publikation B ("Bestimmung der viskoelastischen Eigenschaften auf kleinen Lägenmaßstäben mittels Nanoindentation unter Berücksichtigung von viskoelastisch-plastischem Materialverhalten") wird der Effekt von plastischen Deformationen auf die identifizierten viskoelastischen Modellparameter untersucht. Für niedrig viskose Materialien können zur Parameteridentifikation statt der üblichen Kriechversuche auch zyklische Nanoindentationsversuche eingesetzt werden. In Publikation C ("Identifikation von viskoelastischen Modellparametern mittels zyklischer Nanoindentation") wird eine Methode zur Bestimmung von viskoelastischen Modellparametern aus Versuchsdaten von zyklischen Nanoindentationsversuchen vorgestellt.<br />Die Identifizierung der viskoelastischen Eigenschaften von Bitumen und seinen Materialphasen wird schließlich in Publikation D ("Charakterisierung von Bitumen auf der Mikroebene - Rückrechnung von viskoelastischen Eigenschaften mittels Nanoindentation") vorgestellt. Es wurde eine Parameterstudie bezüglich des Einflusses der Belastungsrate, der Maximallast und der Temperatur durchgeführt. Während die Belastungsrate nur einen geringfügigen Einfluss auf die Parameter hat, hat eine Erhöhung der Maximallast eine signifikante Variation der identifizierten Modellparameter zur Folge. Dieser Effekt wird durch die Mikrostruktur von Bitumen, die eine ähnliche charakteristische Länge wie die Nanoindentationsversuche hat, erklärt. Diese Mikrostruktur wird durch die Anwendung der so genannten Raster-Indentationstechnik visualisiert und zeigt eine hochviskose strangartige Struktur, die in eine niedrigviskose Matrix eingebettet ist. Die für Bitumen und seine Phasen erhaltenen viskoelastischen Parameter dienen als Eingangsgrößen im Rahmen des zuvor erwähnten Mehrskalenmodells, das einerseits die Mikrostruktur mit den mechanischen Eigenschaften von Bitumen verknüpft, und andererseits den Einfluss von Bitumen auf das makroskopische Verhalten von Asphalt vorhersagt.<br />
de
dc.description.abstract
Within the Christian Doppler Laboratory for "Performance Based Optimization of Flexible Pavements", which was installed in 2002 at Vienna University of Technology, a multiscale model for asphalt is developed. The aim of this multiscale model is to relate the macroscopic behavior of asphalt to the material composition and the properties of the constituents at finer scales of observation. This thesis, comprising four publications, deals with the identification of material properties at the finest observation scale introduced within the mentioned multiscale model, i.e., the bitumen-scale. For this purpose, the nanoindentation (NI) technique is employed. Whereas Publications A, B, and C focus on the development of novel methods for the identification of viscoelastic parameters from NI-test data, Publication D is concerned with the characterization of the different material phases of bitumen and their thermorheological behavior.<br />Obviously, the shape of the indenter tip has an impact on the identified model parameters. In Publication A ("Identification of viscoelastic properties by means of nanoindentation taking the real tip geometry into account") this impact was investigated by extending schemes for identification of viscoelastic model parameters towards general tip geometries, accessible through the calibration of the NI-testing equipment. However, in the most general case, the penetrated material exhibits both viscoelastic and plastic deformation. In Publication B ("Finer-scale extraction of viscoelastic properties from nanoindentation characterized by viscoelastic-plastic response") the effect of plastic deformation on the identification of viscoelastic model parameters is investigated. In case of materials exhibiting large viscous deformation, cyclic nanoindentation may be employed for parameter identification instead of nanoindentation (static) creep tests. In Publication C ("Identification of viscoelastic model parameters by means of cyclic nanoindentation testing") cyclic nanoindentation for identification of viscoelastic material parameters is presented. Finally, the identification of viscoelastic properties of bitumen and its material phases is presented in Publication D ("Microscale characterization of bitumen - back-analysis of viscoelastic properties by means of nanoindentation"). A parameter study focusing on the influence of loading rate, maximum load, and temperature on the identified model parameters is presented. Whereas the loading rate was found to show marginal influence on the parameters, the increase in the maximum load results in a significant variation in the identified model parameters.<br />This effect is explained by the bitumen microstructure present at the scale of NI testing. This microstructure is visualized by the so-called grid indentation technique, showing a high-viscous string-like structure embedded into a low-viscous matrix.<br />The obtained viscoelastic parameters for bitumen and its phases shall serve as input for upscaling within the aforementioned multiscale model for asphalt, finally enabling the link between the bitumen microstructure and its mechanical properties, on the one hand, and the macroscopic behavior of asphalt, on the other hand.
en
dc.language
English
-
dc.language.iso
en
-
dc.rights.uri
http://rightsstatements.org/vocab/InC/1.0/
-
dc.subject
Nanoindentation
de
dc.subject
Kriechen
de
dc.subject
Viskoelastizität
de
dc.subject
Parameteridentifikation
de
dc.subject
Bitumen
de
dc.subject
Asphalt
de
dc.subject
Mehrskalenmodellierung
de
dc.subject
nanoindentation
en
dc.subject
creep
en
dc.subject
viscoelasticity
en
dc.subject
parameter identification
en
dc.subject
bitumen
en
dc.subject
asphalt
en
dc.subject
multiscale modeling
en
dc.title
Characterization of viscoelastic properties of bitumen by means of nanoindentation as basis for multiscale modeling of asphalt
en
dc.title.alternative
Charakterisierung der viskoelastischen Eigenschaften von Bitumen mittels Nanoindentation als Grundlage für die Mehrskalenmodellierung von Asphalt
de
dc.type
Thesis
en
dc.type
Hochschulschrift
de
dc.rights.license
In Copyright
en
dc.rights.license
Urheberrechtsschutz
de
dc.contributor.affiliation
TU Wien, Österreich
-
dc.rights.holder
Andreas Jäger
-
tuw.version
vor
-
tuw.thesisinformation
Technische Universität Wien
-
dc.contributor.assistant
Zysset, Philippe
-
tuw.publication.orgunit
E202 - Institut für Mechanik der Werkstoffe und Strukturen
-
dc.type.qualificationlevel
Doctoral
-
dc.identifier.libraryid
AC05037089
-
dc.description.numberOfPages
83
-
dc.identifier.urn
urn:nbn:at:at-ubtuw:1-27716
-
dc.thesistype
Dissertation
de
dc.thesistype
Dissertation
en
dc.rights.identifier
In Copyright
en
dc.rights.identifier
Urheberrechtsschutz
de
item.openairecristype
http://purl.org/coar/resource_type/c_db06
-
item.fulltext
with Fulltext
-
item.cerifentitytype
Publications
-
item.mimetype
application/pdf
-
item.openaccessfulltext
Open Access
-
item.grantfulltext
open
-
item.openairetype
doctoral thesis
-
item.languageiso639-1
en
-
crisitem.author.dept
E202 - Institut für Mechanik der Werkstoffe und Strukturen