<div class="csl-bib-body">
<div class="csl-entry">Seichter, S. (2017). <i>Fatigue behaviour of rubber blends and rubber-textile composites considering application-relevant aspects</i> [Dissertation, Technische Universität Wien]. reposiTUm. https://doi.org/10.34726/hss.2017.22594</div>
</div>
-
dc.identifier.uri
https://doi.org/10.34726/hss.2017.22594
-
dc.identifier.uri
http://hdl.handle.net/20.500.12708/15228
-
dc.description
Abweichender Titel nach Übersetzung der Verfasserin/des Verfassers
-
dc.description.abstract
Die Arbeit beschäftigt sich mit der Untersuchung der Ermüdungs- und Hystereseeigenschaften von Gummi und Gummi-Textil Verbundwerkstoffen. Der Messaufbau ermöglicht die Ermüdung von reinen Gummiproben und Gummi-Textil-Verbundwerkstoffen mit der gleichen Probengeometrie zu untersuchen. Es werden verschiedene Gummimischungen untersucht um den Einfluss der Hauptbestandteile der Gummimischungen zu evaluieren. Ein Hauptaugenmerk liegt in der Untersuchung der Unterschiede zwischen Modellmischungen, die nur im Labor verwendet werden, und industrielle Mischungen, die in Produkten zur Anwendung kommen. Da die üblichen Laborbedingungen von den Lastbedingungen von Produkten oft abweichen, werden die Einflüsse verschiedener Kurvenparameter wie Lastverhältnis, Frequenz bzw. Dehnrate und Kurvenform untersucht. Dabei wird der Lastfall eines bestimmten Produktes (Handlauf) herangezogen. Außerdem wird das Ermüdungsverhalten unter erhöhter Temperatur untersucht. Es werden Risswachstums- und Lebensdauermessungen durchgeführt, wobei jeweils auch die Hystereseeigenschaften untersucht werden. Bei allen Ermüdungsuntersuchungen wird die Dehnung mit digitaler Bildkorrelation bestimmt und die Eigenerwärmung unter zyklischer Belastung mittels IR Thermografiekamera gemessen. Der Zusammenhang zwischen Probentemperatur und dissipierter Energie wird analysiert. Aufbauend auf diesen Erkenntnissen wird das Ermüdungsverhalten der Gummi-Textil-Verbundwerkstoffe untersucht. Für die Verbundwerkstoffe werden gewebte Textilien verwendet statt, wie in der Literatur üblich, einzelne Stränge. Da es sich bei der Form zur Herstellung der Proben und dem Klemmsystem für die Prüfmaschine um Neuentwicklungen handelt, werden sowohl die Ermüdungseigenschaften bezüglich Risswachstum und Lebensdauer untersucht als auch Zugversuche zur Evaluierung der Güte des Verbundes durchgeführt. Da die Prüffrequenz durch die Eigenerwärmung der Materialien begrenzt ist, lassen sich sehr hohe Schwingspielzahlen nur über lange Versuchszeiten erreichen. Deshalb werden verschiedene analytische Modelle zur Lebensdauerabschätzung von Gummi herangezogen und analysiert. Die Modelle werden auf die Qualität ihrer Lebensdauerabschätzung untersucht, aber auch bezüglich des Zeitaufwands, der notwendig ist um die Daten zur Berechnung der Modelle zu ermitteln (Zeitersparnisfaktor).
de
dc.description.abstract
The focus of this work is the investigation of fatigue and hysteresis properties of rubber blends and rubber-textile composites. A measurement set-up is defined which allows to investigate rubber and rubber-textile composites using the same specimen geometry. Different rubber blends are used to investigate the influence of the main material ingredients. The analysis of the difference of model materials used solely in the laboratory and industrial rubber blends used in real products is thereby one of the focuses. Since the typical loading conditions in laboratory deviate from loading cases of real products, different influences of curve parameters including load ratio, frequency/strain rate, and wave form are examined. The loading conditions are chosen with regards to a specific product (handrail). Furthermore, the influence of a higher ambient temperature is studied. Fatigue life and crack growth measurements are conducted and the hysteresis properties are investigated. For all fatigue measurements, the real strain is measured using digital image correlation and the heat build-up under cyclic loading is determined with an IR thermography camera. The relation between sample temperature and dissipated energy is reviewed. Based on the measurements with pure rubber samples, the fatigue behaviour of rubber-textile composites is investigated. The measurement set-up enables the investigation of rubber and rubber-textile samples with the same geometry. For the composites, woven mats are used as reinforcement instead of single cords. The production mould for rubber-textile samples and the clamps for the testing machine are newly developed and built. Therefore, in addition to the crack growth and fatigue life measurements also tensile tests are done to evaluate the quality of the composite. The heat build-up of the materials limits the frequency of the measurements. Therefore, high cycle fatigue measurements are time-consuming. Thus, different analytical models for fatigue life prediction are considered and analysed. The reliability of the fatigue life prediction of these models and also the amount of time (measurement and evaluation time) to attain these predictions are examined.
en
dc.language
English
-
dc.language.iso
en
-
dc.rights.uri
http://rightsstatements.org/vocab/InC/1.0/
-
dc.subject
Gummi
de
dc.subject
Bruchmechanik
de
dc.title
Fatigue behaviour of rubber blends and rubber-textile composites considering application-relevant aspects
en
dc.title.alternative
Charakterisierung des Rissinitiierungs- und Risswachstumsverhaltens von Gummi und Gummiverbundwerkstoffen
de
dc.type
Thesis
en
dc.type
Hochschulschrift
de
dc.rights.license
In Copyright
en
dc.rights.license
Urheberrechtsschutz
de
dc.identifier.doi
10.34726/hss.2017.22594
-
dc.contributor.affiliation
TU Wien, Österreich
-
dc.rights.holder
Sandra Seichter
-
dc.publisher.place
Wien
-
tuw.version
vor
-
tuw.thesisinformation
Technische Universität Wien
-
tuw.publication.orgunit
E308 - Institut für Werkstoffwissenschaft und Werkstofftechnologie
-
dc.type.qualificationlevel
Doctoral
-
dc.identifier.libraryid
AC13702608
-
dc.description.numberOfPages
144
-
dc.thesistype
Dissertation
de
dc.thesistype
Dissertation
en
dc.rights.identifier
In Copyright
en
dc.rights.identifier
Urheberrechtsschutz
de
tuw.advisor.staffStatus
staff
-
tuw.advisor.orcid
0000-0002-5592-5364
-
item.fulltext
with Fulltext
-
item.grantfulltext
open
-
item.cerifentitytype
Publications
-
item.cerifentitytype
Publications
-
item.languageiso639-1
en
-
item.openairecristype
http://purl.org/coar/resource_type/c_18cf
-
item.openairecristype
http://purl.org/coar/resource_type/c_18cf
-
item.openairetype
Thesis
-
item.openairetype
Hochschulschrift
-
item.openaccessfulltext
Open Access
-
crisitem.author.dept
E308 - Institut für Werkstoffwissenschaft und Werkstofftechnologie
-
crisitem.author.parentorg
E300 - Fakultät für Maschinenwesen und Betriebswissenschaften