<div class="csl-bib-body">
<div class="csl-entry">Rauscher, F., & Seifert, A. (2022). Excessive creep strain design check with simulations based on material properties from material standards. <i>Materials at High Temperatures</i>, <i>39</i>(6), 446–461. https://doi.org/10.1080/09603409.2022.2041848</div>
</div>
-
dc.identifier.issn
0960-3409
-
dc.identifier.uri
http://hdl.handle.net/20.500.12708/152744
-
dc.description.abstract
The possibility of doing the Excessive Creep Strain Design Check (ECS-DC) according to EN 13445–3 Annexe B based on simulations was investigated. As a constitutive law for creep, Norton’s law and, as an alternative, a hyperbolic sine law were considered. Creep strain limits given in material standards are the basis for the parameters of these creep laws. A check for reversal creep ensures that repeated primary creep does not occur. The application of this method on a nozzle in a spherical shell shows the calculation of the parameters of the constitutive law and possibilities of damage determination. The geometry is analysed both at constant temperature and with uniform materialas well as with non-uniform material and temperature variations. The focus of the paper is the conservative creep damage determination for design calculations. Therefore, the use of safety factors is included, and appropriate values are discussed.
en
dc.language.iso
en
-
dc.publisher
Taylor & Francis
-
dc.relation.ispartof
Materials at High Temperatures
-
dc.rights.uri
http://creativecommons.org/licenses/by/4.0/
-
dc.subject
Creep design
en
dc.subject
design by analysis
en
dc.subject
direct method
en
dc.subject
EN13445
en
dc.subject
excessive creep strain design check
en
dc.subject
nozzle
en
dc.subject
pressure vessel
en
dc.subject
reference stress
en
dc.title
Excessive creep strain design check with simulations based on material properties from material standards