<div class="csl-bib-body">
<div class="csl-entry">Lückl, M. (2012). <i>Evaluierung und Optimierung von Schmiermitteln für das Ziehen von Molybdän- und Wolfram-Drähten</i> [Master Thesis, Technische Universität Wien]. reposiTUm. http://hdl.handle.net/20.500.12708/159609</div>
</div>
-
dc.identifier.uri
http://hdl.handle.net/20.500.12708/159609
-
dc.description
Abweichender Titel laut Übersetzung der Verfasserin/des Verfassers
-
dc.description.abstract
Die Abteilung "IHR - Produktionslinie Rundprodukte" der Firma Plansee SE stellt unter anderem gezogene Drähte aus Molybdän und Wolfram und deren Legierungen her. Bei diesem Umformprozess haben mehrere Parameter einen entscheidenden Einfluss. Einer davon ist die Schmierung, die als Gleitfilm zwischen dem Drahtwerkstoff und dem Ziehwerkzeug dient. Im Rahmen dieser Masterarbeit wurden die derzeitig eingesetzten Graphit-Schmierstoffe mit am Markt verfügbaren Alternativen verglichen. Zu Beginn wurden typische Kennwerte, wie zum Beispiel die Viskosität nach Brookfield, der Feststoff- und Aschegehalt, der pH-Wert und die Dichte der verschiedenen auf Graphit, Bornitrid und Molybdändisulfid basierenden Schmiermittel ermittelt. Anschließend wurden Ziehversuche im Produktionsumfeld durchgeführt, wobei Alternativen, die ebenfalls auf Graphit basieren, gefunden wurden. In der Molybdän-Drahtlinie gab es zwei Schmieren, die allerdings noch nicht an jeder Ziehanlage verwendet werden können. Bei beiden müssen der Feststoffgehalt und die Viskosität noch angepasst werden. Im Gegensatz dazu wurde im Wolfram-Bereich ein auf Graphit basierender Schmierstoff gefunden, der bereits an allen Anlagen sehr gute Ergebnisse liefert. Zusätzlich zeigten zwei Schmieren, deren Inhaltsstoffe noch etwas verändert werden müssen, eine gute Leistung.
de
dc.description.abstract
The department "IHR - production line round products" of the company Plansee SE produces, among other things, drawn wires of molybdenum and tungsten and their alloys. In this forming process, several parameters have a decisive influence. One is the lubrication, which is a lubricating film between the wire material and the drawing tool. In this thesis, the currently used graphite lubricants were compared with commercially available alternatives. At the beginning typical characteristics were determined, such as the Brookfield viscosity, the solids and ash content, the pH and the density of the different on graphite, boron nitride and molybdenum disulphide based lubricants. Then drawing experiments were carried out in the production environment. Through these experiments alternatives, which are also based on graphite, have been found. In the molybdenum-wire line, there were two lubricants, which were good, but cannot be used with each drawing system. The solids content and viscosity must still be adjusted in both. In contrast, in the tungsten-wire line a lubricant based on graphite was found, which already supplies very good results. Additionally, two lubricants, whose ingredients have to be changed somewhat, showed a good performance.
en
dc.language
Deutsch
-
dc.language.iso
de
-
dc.subject
Draht
de
dc.subject
Drahtziehen
de
dc.subject
Schmiermittel
de
dc.subject
wire
en
dc.subject
wire drawing
en
dc.subject
lubricants
en
dc.title
Evaluierung und Optimierung von Schmiermitteln für das Ziehen von Molybdän- und Wolfram-Drähten
de
dc.title.alternative
Evaluation and optimization of lubricants for the drawing of molybdenum and tungsten wires
en
dc.type
Thesis
en
dc.type
Hochschulschrift
de
dc.contributor.affiliation
TU Wien, Österreich
-
tuw.thesisinformation
Technische Universität Wien
-
tuw.publication.orgunit
E308 - Institut für Werkstoffwissenschaft und Werkstofftechnologie
-
dc.type.qualificationlevel
Diploma
-
dc.identifier.libraryid
AC07814095
-
dc.description.numberOfPages
94
-
dc.thesistype
Masterarbeit
de
dc.thesistype
Master Thesis
en
tuw.advisor.staffStatus
staff
-
tuw.advisor.orcid
0000-0003-4733-4027
-
item.openairecristype
http://purl.org/coar/resource_type/c_18cf
-
item.openairecristype
http://purl.org/coar/resource_type/c_18cf
-
item.cerifentitytype
Publications
-
item.cerifentitytype
Publications
-
item.fulltext
no Fulltext
-
item.openairetype
Thesis
-
item.openairetype
Hochschulschrift
-
item.grantfulltext
none
-
item.languageiso639-1
de
-
crisitem.author.dept
E308 - Institut für Werkstoffwissenschaft und Werkstofftechnologie
-
crisitem.author.parentorg
E300 - Fakultät für Maschinenwesen und Betriebswissenschaften