<div class="csl-bib-body">
<div class="csl-entry">Haderer, H. (2011). <i>Wireless testbed receiver</i> [Diploma Thesis, Technische Universität Wien]. reposiTUm. http://hdl.handle.net/20.500.12708/161455</div>
</div>
-
dc.identifier.uri
http://hdl.handle.net/20.500.12708/161455
-
dc.description
Zsfassung in dt. Sprache
-
dc.description.abstract
Aus heutiger Sicht scheint der Bedarf nach mehr Datendurchsatz in mobilen Anwendungen auch in Zukunft stets zuzunehmen. Um reale drahtlose Übertragungen besser zu verstehen sind Messungen unter realen Bedingungen und nicht nur Simulationen notwendig. Deshalb wurde in den vergangenen Jahren das Vienna Wireless Testbed aufgebaut. Um mit dem zukünftigen Entwicklungen schritt zu halten ist es notwendig, das Testbed zu erweitern, beziehungsweise zu erneuern. Außerdem ist insbesondere beim Publizieren von Messergebnissen sicherzustellen, dass diese nicht durch Störungen oder durch fehlerhafte Teile der Messausrüstung verfälscht werden.<br />In dieser Arbeit wird der Empfänger, welcher ein fundamentaler Bestandteil des Vienna Wireless Testbeds ist, für zukünftige Aufgaben vorbereitet. Wesentliche Verbesserungen an der Qualität von Messungen und zusätzliche Flexibilität werden durch den Austausch des Analog-Digital-Wandlermodules erzielt. Durch die Benutzung einer neuen Timing-Einheit, welche unter anderem für die Auslösung von Messungen verwendet wird, wird eine schnelle und sichere Art, um eine hohe Anzahl von Blöcken innerhalb kurzer Zeit zu übertragen implementiert. Im zweiten Teil der Arbeit wird eine geeignete Methode entwickelt, um in angemessener Zeit die Hochfrequenzbaugruppe des Testbeds zu testen. Die gemessenen Ergebnisse für die derzeitige Konfiguration werden gezeigt.<br />Im speziellen wird die Hochfrequenzhardware mit einem "orthogonal frequency division-multiplex Signal" für drahtlose Übertragungen, welches auch im Mobilfunkstandard der nächsten Generation verwendet wird, getestet. Am Ende wird ein Ausblick gegeben, wie man das Testbed weiter verbessern könnte.<br />
de
dc.description.abstract
These days, the demand for mobile transmission bandwith seems to be a never ending story. To get insights into the real world, wireless transmission measurements and not only simulations of mobile communication systems are necessary. For this task, the Vienna Wireless Testbed has been developed. To keep pace with future developments, the testbed has to be extended and updated constantly. Furthermore, before publishing measured results, one has to make certain that they are not degraded due to impurities or hardware that does not work properly.<br />In this thesis, the receiver, which is a main part of the Vienna Wireless Testbed, is set up for future tasks. Major improvements in quality and flexibility are achieved by replacing the analog to digital conversion plug in board. Furthermore, applying the capabilities of a novel timing responsible for triggering, a fast and secure way of transmitting huge numbers of blocks within short periods of time is achieved. Furthermore, a methodology for rapidly testing the receiver's radio frequency front end hardware is developed. Moreover, measurement results for the current testbed configuration are shown. The receiver hardware is tested in particular with an orthogonal frequency-division multiplex signal which is also used in the next generation mobile communication standard, namely Long Term Evolution (LTE). An outlook on what steps could be taken to improve the performance of the testbed receiver is given at the end of this thesis.
en
dc.language
English
-
dc.language.iso
en
-
dc.subject
Testbed
de
dc.subject
Empfänger
de
dc.subject
Testbed
en
dc.subject
Receiver
en
dc.title
Wireless testbed receiver
en
dc.type
Thesis
en
dc.type
Hochschulschrift
de
dc.contributor.affiliation
TU Wien, Österreich
-
tuw.thesisinformation
Technische Universität Wien
-
dc.contributor.assistant
Rupp, Markus
-
tuw.publication.orgunit
E389 - Institut für Nachrichtentechnik und Hochfrequenztechnik
-
dc.type.qualificationlevel
Diploma
-
dc.identifier.libraryid
AC07812444
-
dc.description.numberOfPages
49
-
dc.thesistype
Diplomarbeit
de
dc.thesistype
Diploma Thesis
en
tuw.advisor.staffStatus
staff
-
tuw.assistant.staffStatus
staff
-
tuw.assistant.orcid
0000-0001-9003-7779
-
item.openairecristype
http://purl.org/coar/resource_type/c_18cf
-
item.openairecristype
http://purl.org/coar/resource_type/c_18cf
-
item.cerifentitytype
Publications
-
item.cerifentitytype
Publications
-
item.fulltext
no Fulltext
-
item.openairetype
Thesis
-
item.openairetype
Hochschulschrift
-
item.grantfulltext
none
-
item.languageiso639-1
en
-
crisitem.author.dept
E389 - Telecommunications
-
crisitem.author.parentorg
E350 - Fakultät für Elektrotechnik und Informationstechnik