<div class="csl-bib-body">
<div class="csl-entry">Jüly, C. (2021). <i>Thermodynamische und strömungstechnische Auslegung einer zweigehäusigen Industriedampfturbine</i> [Diploma Thesis, Technische Universität Wien]. reposiTUm. https://doi.org/10.34726/hss.2021.80464</div>
</div>
-
dc.identifier.uri
https://doi.org/10.34726/hss.2021.80464
-
dc.identifier.uri
http://hdl.handle.net/20.500.12708/17084
-
dc.description
Abweichender Titel nach Übersetzung der Verfasserin/des Verfassers
-
dc.description.abstract
In dieser Arbeit wird eine zweigehäusige Industriedampfturbine mit zwei Entnahmen ausgelegt. Im ersten Gehäuse ist eine Hochdruckturbine samt Düsengruppenregelung, im zweiten Gehäuse sind Mitteldruck- und Niederdruckturbine untergebracht, welche jeweils durch eine Drossel geregelt sind. Im Rahmen der Auslegung erfolgt im ersten Schritt die thermodynamische Berechnung des Dampfprozesses. Durch die Festlegung eines Sperrdampfsystem sowie Berücksichtigung von Leckageströmen in Labyrinthdichtungen kann der Massenstrom abgeschätzt werden. Anschließend erfolgt die Strömungsberechnung der Beschaufelung. Dies wird mittels analytischen 1-D Mittelschnittverfahren durchgeführt. Die Regelstufe der Hochdruckturbine wird als Gleichdruckstufe, die restlichen Stufen als Überdruckstufen ausgeführt. Als Schaufelprofil der Überdruckstufen wird das Traupel-Profil herangezogen. Die Sehnenlängen werden dabei entsprechend der benötigten Werkstofffestigkeit gewählt. Die Endstufe der Niederdruckturbine wird aufgrund des dreidimensionalen Charakters der Strömung verwunden ausgeführt. Um den Axialschub des Rotors zu reduzieren wurden zwei Ausgleichkolben vorgesehen. Einer am Rotor der Hochdruckturbine und einer am Roter der Mitteldruck- und Niederdruckturbine. Abschließend wird auf die Regelung der Dampfturbine eingegangen.
de
dc.description.abstract
In this paper, a two housing industrial steam turbine with two controlled extractions is designed. The first housing contains a high-pressure turbine with a nozzle group control. The second housing contains a medium-pressure and a low-pressure turbine, each of them controlled by a throttle. The first step in the design process is the thermodynamic calculation of the steam process. The mass flow can be estimated by specifying a gland steam system and considering leakage flows in labyrinth seals. Afterwards the flow calculation of the blading takes place. This is done by calculating the flow with a meanline analysis. The control stage of the high-pressure turbine is designed as an impulse stage, the remaining stages as reaction stages. The Traupel-profile is used for the blade profile of the reaction stages. The chord lengths are selected according to the required material strength.The final stage of the low-pressure turbine is designed as a twisted blade, according to the three-dimensional character of the flow. To reduce the axial thrust of the rotor, two balancing pistons are used. One on the rotor of the high-pressure turbine and one on the rotor of the medium-pressure and low-pressure turbine. Finally, the partial load behavior of the steam turbine is discussed.
en
dc.language
Deutsch
-
dc.language.iso
de
-
dc.rights.uri
http://rightsstatements.org/vocab/InC/1.0/
-
dc.subject
Industriedampfturbine
de
dc.subject
Mittelschnittrechnung
de
dc.subject
industrial steam turbine
en
dc.subject
mean line analysis
en
dc.title
Thermodynamische und strömungstechnische Auslegung einer zweigehäusigen Industriedampfturbine
de
dc.title.alternative
Thermodynamic and fluid dynamic design of a double-casing industrial steam turbine
en
dc.type
Thesis
en
dc.type
Hochschulschrift
de
dc.rights.license
In Copyright
en
dc.rights.license
Urheberrechtsschutz
de
dc.identifier.doi
10.34726/hss.2021.80464
-
dc.contributor.affiliation
TU Wien, Österreich
-
dc.rights.holder
Christoph Jüly
-
dc.publisher.place
Wien
-
tuw.version
vor
-
tuw.thesisinformation
Technische Universität Wien
-
dc.contributor.assistant
Öttl, Christoph
-
tuw.publication.orgunit
E302 - Institut für Energietechnik und Thermodynamik