<div class="csl-bib-body">
<div class="csl-entry">Yakymovych, A., Khrushchyk, K., Wodak, I., Plevachuk, Y., Švec, P. Sr., Švec, P., Orovcik, L., & Khatibi, G. (2026). Hybrid solder joints: Morphology and mechanical properties of lead-free Sn-3.5Ag/Cu solder joints with Ni-coated ceramic nanoparticles. <i>MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING</i>, <i>973</i>, Article 150777. https://doi.org/10.1016/j.msea.2026.150777</div>
</div>
-
dc.identifier.issn
0921-5093
-
dc.identifier.uri
http://hdl.handle.net/20.500.12708/232121
-
dc.description.abstract
Sn-based Sn-Ag-Cu (SAC) solders are a great achievement of the scientific studies to replace the hazardous Pb-contained commercial solders. Nevertheless, the higher melting temperature comparing to the convenient Pb-Sn solders leads to the mechanical reliability issues of the lead-free solder joints due to larger Sn-Cu intermetallic compounds (IMCs), formed during the soldering process. In this work, the effects of minor additions of nanosized ceramic SiO₂ and ZrO₂ particles coated with Ni into the Sn–3.5Ag solder joints on their microstructure and shear strength has been studied. The morphology of the nanoparticles has been analyzed by transmission electron microscopy. Furthermore, SEM micrograph with EDS elemental analysis confirmed presence of Ni after the sputtering procedure on the surface of ceramic nanoparticles. The solder joints were produced in a sandwich form, where the nanopowders were mixed with a commercial flux and placed between the Sn–3.5Ag foil and Cu plate. The microstructure of the produced solder joints has been investigated using the scanning electron microscope. The discontinuous scallop-type shape of the interface IMC layer between the solder and substrate in the Sn–3.5Ag solder joint was changed into a more planar-type shape in those with nanosized additons. The major improvements of the interfacial layer shape were indicated for samples contained 0.5 wt% of nanosized inclusions, while the thickness of interfacial IMC layer decreased mostly gradually with increasing of nanoparticles up to 1 wt%. The shear strength of solder joints with nanosized additons was significantly enhanced from circa 30 MPa to circa 40 MPa.
en
dc.language.iso
en
-
dc.publisher
ELSEVIER SCIENCE SA
-
dc.relation.ispartof
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
-
dc.subject
Ceramic nanoparticles
en
dc.subject
Hybrid solder joint
en
dc.subject
Microstructure
en
dc.subject
Ni-covered particles
en
dc.subject
Shear strength
en
dc.title
Hybrid solder joints: Morphology and mechanical properties of lead-free Sn-3.5Ag/Cu solder joints with Ni-coated ceramic nanoparticles