<div class="csl-bib-body">
<div class="csl-entry">Kahraman, Y. E., Madan, M., Sagbas, B., & Durakbasa, M. N. (2020). Parametric Design and Modeling of 3D Printed Prosthetic Finger. In M. N. Durakbasa & G. Gencyilmaz (Eds.), <i>Digital Conversion on the Way to Industry 4.0</i> (pp. 80–90). Springer Nature Switzerland AG. https://doi.org/10.1007/978-3-030-62784-3_7</div>
</div>
-
dc.identifier.uri
http://hdl.handle.net/20.500.12708/30400
-
dc.description.abstract
Three dimensional (3D) printed prostheses have emerging trends in recent years. They become popular with their cost-effective and easy to build structures which provided by the developments of the additive manufacturing technology. By these advancements, many open-source prosthetic hand models started to appear in the market. However, some of them are not suitable for all kinds of patients yet. So, a good deal of designs has failed to meet all of the user´s physical needs which might cause the device not being used by the patients. In this paper, it is tried to do a parametric design and produce a mechanical prosthesis with a simple mechanical design that can be adapted easily to each patient. For this purpose, the information about a planar four-link mechanism, design, and analysis steps of the mechanism and how it can be improved in the future has been discussed.
en
dc.publisher
Springer Nature Switzerland AG
-
dc.subject
Prosthetic hand / Additive manufacturing / 3D production / Upper limb / Low-cost production
-
dc.title
Parametric Design and Modeling of 3D Printed Prosthetic Finger
-
dc.type
Buchbeitrag
de
dc.type
Book Contribution
en
dc.relation.publication
Digital Conversion on the Way to Industry 4.0
-
dc.relation.isbn
978-3-030-62783-6
-
dc.relation.doi
10.1007/978-3-030-62784-3
-
dc.relation.issn
2195-4356
-
dc.description.startpage
80
-
dc.description.endpage
90
-
dc.type.category
Edited Volume Contribution
-
dc.relation.eissn
2195-4364
-
dc.publisher.place
Cham, Switzerland
-
tuw.booktitle
Digital Conversion on the Way to Industry 4.0
-
tuw.book.ispartofseries
Lecture Notes in Mechanical Engineering
-
tuw.relation.publisher
Springer
-
tuw.relation.publisherplace
Schweiz
-
tuw.researchTopic.id
C6
-
tuw.researchTopic.id
M2
-
tuw.researchTopic.id
X1
-
tuw.researchTopic.name
Modelling and Simulation
-
tuw.researchTopic.name
Materials Characterization
-
tuw.researchTopic.name
außerhalb der gesamtuniversitären Forschungsschwerpunkte
-
tuw.researchTopic.value
30
-
tuw.researchTopic.value
40
-
tuw.researchTopic.value
30
-
tuw.publication.orgunit
E311-01-4 - Forschungsgruppe Fertigungsmesstechnik und adaptronische Systeme
