MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

Title Titel
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
 
e-ISSN
1873-4936
 
ISSN
0921-5093
 
Publisher Herausgeber
ELSEVIER SCIENCE SA
 
Publisher's Address Herausgeber Adresse
PO BOX 564, LAUSANNE, SWITZERLAND, 1001
 
Listed in SCI Aufgelistet im SCI
 
Peer reviewed Begutachtet
 
 

Publications Publikationen

Filter:
Subject:  General Materials Science
Subject:  Mechanics of Materials

Results 21-37 of 37 (Search time: 0.003 seconds).

PreviewAuthor(s)TitleTypeIssue Date
21Rajput, S.K. ; Dikovits, Martina ; Chaudhari, G.P. ; Poletti, Cecilia ; Warchomicka, Fernando ; Pancholi, Vivek ; Nath, S.K. Physical simulation of hot deformation and microstructural evolution of AISI 1016 steel using processing mapsArtikel Article 4-Sep-2013
22Ahmadi, M.R. ; Sonderegger, B. ; Povoden-Karadeniz, E. ; Falahati, A. ; Kozeschnik, E. Precipitate strengthening of non-spherical precipitates extended in #lt 100 #gt or {100} direction in fcc crystalsArtikel Article2014
23Lasagni, Fernando ; Mingler, Bernhard ; Dumont, Myriam ; Degischer, Hans Peter Precipitation kinetics of Si in aluminium alloysArtikel Article2008
24Poletti, C. ; Degischer, H.P. ; Kremmer, S. ; Marketz, W. Processing maps of Ti662 unreinforced and reinforced with TiC particles according to dynamic modelsArtikel Article2008
25Österreicher, Johannes Albert ; Papenberg, Nikolaus Peter ; Kumar, Manoj ; Ma, Duancheng ; Schwarz, Sabine ; Schlögl, Carina Maria Quantitative prediction of the mechanical properties of precipitationhardened alloys with special application to Al-Mg-SiArtikel Article 2017
26Österreicher, Johannes Albert ; Kumar, Manoj ; Schiffl, Andreas ; Schwarz, Sabine ; Bourret, Gilles Remi Secondary precipitation during homogenization of Al-Mg-Si alloys: Influence on high temperature flow stressArtikel Article 2017
27Requena, Guillermo ; Maire, Eric ; Leguen, Claire ; Thuillier, Sandrine Separation of nucleation and growth of voids during tensile deformation of a dual phase steel using synchrotron microtomographyArtikel Article2014
28Soliman, Mohamed ; Shan, Yao ; Mendez-Martin, Francisca ; Kozeschnik, Ernst ; Palkowski, Heinz Strain aging characterization and physical modelling of over-aging in dual phase steelArtikel Article 2020
29Warchomicka, F. ; Poletti, C. ; Stockinger, M. Study of the hot deformation behaviour in Ti-5Al-5Mo-5V-3Cr-1ZrArtikel Article2011
30Tolnai, D. ; Requena, G. ; Cloetens, P. ; Lendvai, J. ; Degischer, H.P. Sub-micrometre holotomographic characterisation of the effects of solution heat treatment on an AlMg7.3Si3.5 alloyArtikel Article2012
31Kreyca, Johannes ; Kozeschnik, Ernst Temperature-dependent strain hardening, precipitation and deformationinduced microstructure evolution in AA 6061Artikel Article 2017
32Sabirov, I. ; Duschlbauer, D. ; Pettermann, H.E. ; Kolednik, O. The Determination of the Local Conditions for Void Initiation in Front of a Crack Tip for Materials with Second Phase ParticlesArtikel Article2005
33Whitmore, Lawrence ; Ahmadi, Mohammad Reza ; Guetaz, Laure ; Leitner, Harald ; Povoden-Karadeniz, Erwin ; Stockinger, Martin ; Kozeschnik, Ernst The microstructure of heat-treated nickel-based superalloy 718PlusArtikel Article2014
34Asghar, Z. ; Requena, G. ; Kubel, F. The role of Ni and Fe aluminides on the elevated temperature strength of an AlSi12 alloysArtikel Article2010
35Asghar, Z. ; Requena, G. Three dimensional post-mortem study of damage after compression of cast Al-Si alloysArtikel Article2014
36Whitmore, Lawrence ; Leitner, Harald ; Povoden-Karadeniz, Erwin ; Radis, Rene ; Stockinger, Martin Transmission electron microscopy of single and double aged 718Plus superalloyArtikel Article2012
37Ahmadi, M.R. ; Povoden-Karadeniz, E. ; Whitmore, L. ; Stockinger, M. ; Falahati, A. ; Kozeschnik, E. Yield strength prediction in Ni-base alloy 718Plus based on thermo-kinetic precipitation simulationArtikel Article2014