<div class="csl-bib-body">
<div class="csl-entry">Fimberger, J. (2013). <i>Untersuchungen zur Beurteilung der Betriebsfähigkeit einer katalytischen Crackanlage mit intern zirkulierender Wirbelschicht</i> [Diploma Thesis, Technische Universität Wien]. reposiTUm. https://resolver.obvsg.at/urn:nbn:at:at-ubtuw:1-54963</div>
</div>
Abweichender Titel laut Übersetzung der Verfasserin/des Verfassers
-
dc.description
Zsfassung in engl. Sprache
-
dc.description.abstract
Am Institut für Verfahrenstechnik, Umwelttechnik und Technische Biowissenschaften der TU-Wien stehen zwei vollkontinuierliche Katalytische Crackanlagen mit intern zirkulierender Wirbelschicht zur Verfügung. Eine Anlage, im Folgenden als Anlage A bezeichnet, wurde Mitte der 1990er Jahre von Hofbauer und Reichhold entwickelt und seither bei zahlreichen Versuchen verwendet. Eine Überschreitung der Feedrate von 3kg/h ist nicht zufriedenstellend möglich. Eine weitere Anlage, im Folgenden als Anlage B bezeichnet, mit größerer Regeneratorkapazität wurde deshalb von Bielansky und Weinert im Jahr 2010 entwickelt. Ziel dieser Diplomarbeit ist es, die volle Funktionsfähigkeit der Anlage B für zukünftige Versuche zu überprüfen.<br />Im Rahmen dieser Arbeit wurden Versuche zur quantitativen Erfassung der Einflüsse von Anlagenparametern wie Riser-Leerrohrgeschwindigkeit, Bodenfluidisierung, Feedeinleitrohrlänge und freie Querschnittsfläche des Riserrohres auf die Umlaufrate durchgeführt. Des Weiteren wurden Verteilungsmessungen im gesamten Arbeitsbereich zur Beurteilung der Gaswege in der Anlage ausgeführt. Nach erfolgreicher Absolvierung dieser "Trockenversuche" (Riserfluidisierung mit Luft) wurden Feedversuche mit einem Equilibriums- Katalysator der Firma Grace und VGO als Einsatzstoff durchgeführt. Hierbei wurde der Einfluss von Regeneratorfluidisierung und Siphonfluidisierung auf den Koksanteil im Produkt betrachtet. Die Produktzusammensetzung aus den Crackversuchen wurde mit jener der Anlage A verglichen. Proben des beladenen und des regenerierten Katalysators beider Anlagen wurden entnommen und einer thermogravimetrischen Analyse unterzogen. Experimente zum Verhalten des Produktspektrums bei Variation der Risermitteltemperatur und des C/O-Verhältnisses (Katalysator/Öl-Verhältnis) wurden durchgeführt.<br />Die grundsätzliche Betriebsfähigkeit der Anlage konnte dargestellt werden. Es wurde eine Tendenz der Anlage B hin zu niedrigeren Konversionen und höheren Koksanteilen im Vergleich zur Anlage A festgestellt. Ein wesentliches Problem stellt dabei der Einzug des Katalysators in den Riser dar.<br />
de
dc.description.abstract
At the Institute of Chemical Engineering of the Vienna University of Technology two fully continuous small-scale FCC pilot facilities with an internal circulating fluidized bed design are available. A plant, henceforth referred to as plant A, was developed in the mid-1990s by Hofbauer and Reichhold and it has been used at numerous experiments ever since. It is not possible to exceed a feedrate of 3kg/h at a satisfactory level. Therefore an additional plant, henceforth referred to as plant B, with a higher capacity of the regenerator was developed by Bielansky and Weinert in the year 2010. The aim of this work is to examine the full operability of plant B for future experiments.<br />Within the scope of this thesis experiments were conducted to measure the influences of plant parameters like riser superficial velocity, bottom-fluidization, feed inlet tube length and cross-sectional area of the riser tube on the circulation rate quantitatively. In addition experiments to evaluate the gas distribution in the plant at the entire operating range were carried out. After the successful completion of these testings (riser-fluidization with air) feed experiments with an equilibrium-catalyst of the company Grace and VGO as a typical feedstock were performed. The influence of regenerator-fluidization and siphon-fluidization on the coke amount in the product was observed. The product composition obtained by the experiments were compared to plant A. Samples of the loaded and the regenerated catalyst of both plants were withdrawn and underwent a thermogravimetric analysis. Experiments which show the influence on the product composition by variation of the mean riser temperature and the c/o-ratio (catalyst/oil-ratio) were performed.<br />The operability of the plant was demonstrated. It could be shown that there is a tendency to lower conversion grades and higher coke ammounts at plant B in comparison to plant A. A crucial problem constitutes the entrance of the catalyst into the riser.
en
dc.language
Deutsch
-
dc.language.iso
de
-
dc.rights.uri
http://rightsstatements.org/vocab/InC/1.0/
-
dc.subject
FCC
de
dc.subject
katalytisches Cracken
de
dc.subject
Wirbelschicht
de
dc.subject
intern zirkulierend
de
dc.subject
Untersuchungen
de
dc.subject
Umlaufratenmessungen
de
dc.subject
Gasverteilungsmessungen
de
dc.subject
Feedversuche
de
dc.subject
Inbetriebnahme
de
dc.subject
FCC
en
dc.subject
catalytic cracking
en
dc.subject
fluidized bed
en
dc.subject
internal circulation
en
dc.subject
analysis
en
dc.subject
circulation rate
en
dc.subject
gas distribution
en
dc.subject
experiments with feed
en
dc.subject
putting into operation
en
dc.title
Untersuchungen zur Beurteilung der Betriebsfähigkeit einer katalytischen Crackanlage mit intern zirkulierender Wirbelschicht
de
dc.title.alternative
Assessment of operability of a catalytic cracking plant with internal circulating fluidized bed
en
dc.type
Thesis
en
dc.type
Hochschulschrift
de
dc.rights.license
In Copyright
en
dc.rights.license
Urheberrechtsschutz
de
dc.contributor.affiliation
TU Wien, Österreich
-
dc.rights.holder
Josef Fimberger
-
tuw.version
vor
-
tuw.thesisinformation
Technische Universität Wien
-
dc.contributor.assistant
Reichhold, Alexander
-
tuw.publication.orgunit
E166 - Institut für Verfahrenstechnik, Umwelttechnik und Technische Biowissenschaften